3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
84ecf96be5
Prusa-Firmware/Firmware
History
Yuri D'Elia 84ecf96be5 Do not clear last print fail stats prematurely 
M24 was always cleaning the last print failstats. But because M24 is
used to restore a print after power failure (by setting the seek
offset), it would also reset the stats incorrectly after resuming.

Check for the file index position and reset the stats only when a print
is started from the beginning of the file.

Apply the same logic to M32 and similarly handle the LA10->15 conversion
(do not re-apply the adjustment for a resumed print).
2020-01-31 15:08:24 +01:00
..
variants Rewrite uvlo handling for accurate Z re/positioning 2020-01-26 17:46:50 +01:00
adc.c IR sensor gen. II 2019-09-16 00:43:37 +02:00
adc.h Fix ADC index overflow 2018-07-17 17:55:04 +02:00
AutoDeplete.cpp Comment. 2019-01-04 19:56:15 +01:00
AutoDeplete.h Add filament auto deplete engine for multi-material prints with MMUv2. 2019-01-03 22:58:25 +01:00
backlight.cpp General fixes and improvements to code 2019-10-31 19:07:20 +02:00
backlight.h General fixes and improvements to code 2019-10-31 19:07:20 +02:00
BlinkM.cpp Build 109 2017-11-16 22:03:36 +01:00
BlinkM.h Build 109 2017-11-16 22:03:36 +01:00
boards.h MK3 configuration files, renamed EINY to EINSY 2018-02-01 17:10:41 +01:00
bootapp.c New lang, arduino 1.8.5 - boot_app debug output 2018-10-18 16:20:14 +02:00
bootapp.h New lang, arduino 1.8.5 - boot_app debug output 2018-10-18 16:20:14 +02:00
cardreader.cpp Fix kill messages 2019-11-29 22:49:22 +02:00
cardreader.h Fix pause/resume when using M25/M601 2019-11-28 17:37:58 +01:00
cmdqueue.cpp Fix kill messages 2019-11-29 22:49:22 +02:00
cmdqueue.h Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card. 2019-08-23 19:30:20 +02:00
config.h Merge branch 'MK3' into PFW-943 2019-09-16 15:29:28 +02:00
Configuration_adv.h Add a Linear Advance 1.0->1.5 compatibility layer 2019-12-21 23:22:35 +01:00
Configuration.cpp some improvements 2019-07-10 16:29:40 +02:00
Configuration.h Version changed (3.9.0 build 3175) 2020-01-16 16:03:34 +01:00
ConfigurationStore.cpp Fixup prefix echomagic for the LA config report 2019-05-24 17:08:32 +02:00
ConfigurationStore.h Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S 2019-03-19 21:39:59 +00:00
conv2str.cpp LCD menu optimalization - conversion functions - source separation 2018-07-16 17:23:35 +02:00
conv2str.h LCD menu optimalization - conversion functions - source separation 2018-07-16 17:23:35 +02:00
Dcodes.cpp Fixed stuipid copy paste error 2019-12-04 14:21:43 +01:00
Dcodes.h Merge branch 'MK25' into MK3 2018-03-13 20:43:19 +01:00
doxyfile Updated doxygen docs to work better with confluence. 2019-07-19 13:51:55 +02:00
eeprom.cpp EEPROM_BABYSTEP_Z using removal 2019-10-01 16:57:37 +02:00
eeprom.h Save/restore hotend temperatures above 255C in PowerPanic 2020-01-27 14:59:18 +01:00
fastio.h WRITE_NC macro for non-critical (non-synchronized) access to 2018-01-12 20:15:59 +01:00
Firmware.ino LCD menu optimalization - LiquidCrystal_Prusa removed 2018-07-16 23:23:15 +02:00
first_lay_cal.cpp Rename lay1cal_preheat() to lay1cal_wait_preheat(). 2019-09-12 00:19:20 +02:00
first_lay_cal.h Rename lay1cal_preheat() to lay1cal_wait_preheat(). 2019-09-12 00:19:20 +02:00
fsensor.cpp Merge pull request #2394 from wavexx/fsensor_no_recursion 2020-01-30 14:18:07 +01:00
fsensor.h Merge remote-tracking branch 'upstream/MK3' into MK3_LA15 2019-12-04 17:27:23 +01:00
heatbed_pwm.cpp Documentation 2020-01-29 23:07:24 +02:00
io_atmega2560.h "disable_z()" for Delta PSU II 2019-03-25 23:28:25 +01:00
la10compat.cpp Improve K error checking, allow to manually reset the version 2019-12-30 14:31:39 +01:00
la10compat.h Add a Linear Advance 1.0->1.5 compatibility layer 2019-12-21 23:22:35 +01:00
language.c Fix language related warnings in LANG_MODE 0 2019-07-29 15:55:42 +03:00
language.h New lang - fixed french langcode and comparsion in lang-clean script 2018-10-25 18:16:36 +02:00
lcd.cpp fix the knob long-press causing hang in modal dialogs 2019-10-01 17:13:36 +02:00
lcd.h Merge branch 'MK3' into MK3_Translations 2019-09-12 16:28:36 +03:00
le.sh make all shell scripts executable 2018-12-10 07:09:03 -07:00
Marlin_main.cpp Do not clear last print fail stats prematurely 2020-01-31 15:08:24 +01:00
Marlin.h Really poweroff Z motors when PSU_Delta is defined 2020-01-27 18:50:17 +01:00
MarlinSerial.cpp Optimized LiquidCrystal class 2018-06-08 14:35:47 +02:00
MarlinSerial.h More than 7.5KB saved by slight refactoring of printing to serial line 2019-07-12 10:10:56 +02:00
menu.cpp Merge remote-tracking branch 'upstream/MK3' into MK3_LA15 2019-12-04 17:27:23 +01:00
menu.h Fix Live K, allow "Advance K" to be translated 2019-12-05 15:18:24 +01:00
mesh_bed_calibration.cpp Revert "Mesh bed leveling testing" 2020-01-29 23:07:53 +02:00
mesh_bed_calibration.h Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update 2019-03-14 01:52:44 +01:00
mesh_bed_leveling.cpp 7x7 points mesh bed leveling 2019-02-14 10:57:58 +02:00
mesh_bed_leveling.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
messages.c Display "POWER PANIC DETECTED" when possible 2020-01-29 21:08:56 +01:00
messages.h Display "POWER PANIC DETECTED" when possible 2020-01-29 21:08:56 +01:00
mmu.cpp Merge pull request #2393 from wavexx/sync_before_resume 2020-01-15 12:49:56 +01:00
mmu.h Show FINDA state as N/A if last received response is older than 1s. 2019-10-31 17:45:22 +01:00
motion_control.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
motion_control.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
optiboot_w25x20cl.cpp Fix optiboot erase function after address 0xFFFF 2019-12-08 08:43:43 +02:00
optiboot_w25x20cl.h Added support for a secondary boot loader, based on the OptiBoot project, 2018-06-14 15:13:21 +02:00
pat9125.c Fix compiler warning arduino-1.6.9/hardware/tools/avr/avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>." [-Wcpp] 2018-07-23 18:12:08 +02:00
pat9125.h PAT9125 optimalization (rewrited to C, 8bit sampling) 2018-07-12 18:11:07 +02:00
pins_Einsy_1_0.h Merge branch 'MK3' into MK3-PFW-1024 2019-11-29 13:07:45 +02:00
pins_Rambo_1_0.h MK2.5 IR_SENSOR_PIN modified 2019-02-11 14:32:21 +01:00
pins_Rambo_1_3.h debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified 2019-03-06 19:56:48 +01:00
pins.h Fix compiler warnings macro redefined. 2019-03-05 15:56:20 +01:00
planner.cpp Use world2machine instead of repeating code 2020-01-26 17:46:50 +01:00
planner.h Fix incorrect usage of plan_set_e_position() in G92 E* 2020-01-14 20:24:14 +01:00
printers.h Remove commented out defines. 2019-07-10 17:40:33 +02:00
qr_solve.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
qr_solve.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
rbuf.c T-codes for MMU_V2: initial version 2018-07-09 13:57:36 +02:00
rbuf.h T-codes for MMU_V2: initial version 2018-07-09 13:57:36 +02:00
Sd2Card.cpp reinitialize the timestamp to ensure enough time to receive response for 0xFF sent. 2019-08-11 17:57:41 -04:00
Sd2Card.h Fix for Toshiba FlashAir (or other) SD card initialization - add clock cycles between sending CMD0 and CMD8. Redone for MK3 branch) 2019-08-08 15:45:59 -04:00
Sd2PinMap.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdBaseFile.cpp Support for more special characters allowed in file names (^ + = [ ] ; 2019-08-27 13:47:58 +02:00
SdBaseFile.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdFatConfig.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
SdFatStructs.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
SdFatUtil.cpp Fix compiler warning: sketch/SdFatUtil.cpp:49:7: warning: unused variable 'i' [-Wunused-variable] 2018-07-25 15:19:10 +02:00
SdFatUtil.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdFile.cpp 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdFile.h Optimized LiquidCrystal class 2018-06-08 14:35:47 +02:00
SdInfo.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdVolume.cpp 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdVolume.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
Servo.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
Servo.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
sm4.c Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 2018-10-08 15:58:49 +02:00
sm4.h New XYZ calibration with image processing 2018-03-13 12:55:35 +01:00
sound.cpp General fixes and improvements to code 2019-10-31 19:07:20 +02:00
sound.h Toggle Sound 2019-08-31 16:56:14 +03:00
speed_lookuptable.cpp Move speed lookup defs into a separate source 2019-05-24 17:08:32 +02:00
speed_lookuptable.h Move calc_timer into speed_lookup_table for planner reuse 2019-05-24 17:08:32 +02:00
spi.c New SPI (do not use Arduino SPI class) 2018-03-29 17:42:41 +02:00
spi.h New ML support - W25X20CL external spi flash support 2018-06-08 00:20:28 +02:00
static_assert.h static_assert - portable solution compatible with C++98 2018-09-27 19:59:29 +02:00
stepper.cpp Fix incorrect usage of plan_set_e_position() in G92 E* 2020-01-14 20:24:14 +01:00
stepper.h Remove clear_current_adv_vars() 2019-06-05 20:25:19 +02:00
stk500.h Added support for a secondary boot loader, based on the OptiBoot project, 2018-06-14 15:13:21 +02:00
swi2c.c Fix compiler warning arduino-1.6.9/hardware/tools/avr/avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>." [-Wcpp] 2018-07-23 13:47:15 +02:00
swi2c.h SWI2C for PAT9125 simplified/optimized 2018-07-12 17:55:38 +02:00
swspi.cpp PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
swspi.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
system_timer.h heatbed audible noise suppression using short fast PWM pulses with 2019-07-08 16:42:21 +02:00
temperature.cpp Show correct fixed message 2020-01-30 17:24:32 +02:00
temperature.h Merge branch 'MK3' into MK3_BED_LEVELING_PWM 2020-01-07 07:58:32 +02:00
thermistortables.h New ML support - menu tunning, startup 2018-06-10 16:04:32 +02:00
timer02.c Improve performance of bed PWM automaton - proof of concept 2019-08-14 17:53:08 +02:00
timer02.h heatbed audible noise suppression using short fast PWM pulses with 2019-07-08 16:42:21 +02:00
Timer.cpp Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2. 2019-01-28 19:29:31 +01:00
Timer.h Store timer period in TimerRemaining. 2018-06-11 23:41:36 +02:00
TimerRemaining.h Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2. 2019-01-28 19:29:31 +01:00
tmc2130.cpp Merge pull request #2342 from vintagepc/2306-hard-reset-homing-fails 2019-12-15 10:51:52 +01:00
tmc2130.h Fix compiler warnings 2019-07-16 17:31:56 +02:00
uart2.c Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500 2018-10-08 15:58:49 +02:00
uart2.h MMU - communication, check after start, code cleaning 2018-08-07 20:37:59 +02:00
ultralcd.cpp Merge pull request #2393 from wavexx/sync_before_resume 2020-01-15 12:49:56 +01:00
ultralcd.h Merge pull request #2058 from leptun/MK3_fix_warnings 2019-12-15 09:29:27 +01:00
uni_avr_rpi.h Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:"" 2018-07-23 13:35:38 +02:00
util.cpp default nozzle diameter for farm mode 2019-09-23 17:13:33 +02:00
util.h default nozzle diameter for farm mode 2019-09-23 17:13:33 +02:00
vector_3.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
vector_3.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
w25x20cl.c Added support for a secondary boot loader, based on the OptiBoot project, 2018-06-14 15:13:21 +02:00
w25x20cl.h Added support for a secondary boot loader, based on the OptiBoot project, 2018-06-14 15:13:21 +02:00
xyzcal.cpp Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation. 2019-01-27 22:48:51 +01:00
xyzcal.h XYZ calibration - accuracy improvement 2018-03-27 17:27:41 +02:00