3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8f02262bbd
Prusa-Firmware/lang/po/Firmware_hu.po
Yuri D'Elia 0d7680dbf7
New PO-based language translation support (#3471) 
* lang: Add a PO language extractor with FW metadata support

Implement a straight-to-po language extractor which supports our custom
language requirements:

- _i/_I/ISTR for text string definitions
- _T for catalog translations (with back-reference support)
- //// EOL comments with:
  - MSG_ catalog entry name identifiers
  - c=X r=Y annotations for screen dimensioning checks
- Crude support for commented lines

All source locations are correctly referenced in the PO, with the
metadata colleted in the comment for further processing.

Several checks are implemented already during extraction:

- Correct catalog name assignment (no duplicates)
- Metadata checks for each entry

Further checks will be implemented by directly checking the translated PO file.

Requires "polib" and "regex" python modules.

* lang: Adapt lang-check to work directly on PO/POT files

* lang: Allow lang-extract to generate stable (pre-sorted) output directly

* lang: Further extend lang-extract consistency/error checking

- Do not parse inside preprocessor conditionals
- Distinguish between references and definitions
- Warn about missing references and definitions

* lang: lang-extract: warn about incorrect PROGMEM assignments

Check that ISTR is used along with PROGMEM_I1 in an attempt to spot
useless translated catalogs.

* lang: lang-extract: Improved handling of same-line translations

Correctly reference metadata on same-line translations.

* lang: lang-extract: Handle _O as a cat-ref

https://github.com/prusa3d/Prusa-Firmware/pull/3434

* lang: lang-extract: Warn about unused catalog definitions

* lang: lang-extract: Allow propagating translation comments via //

The definition:

    code //// definition [// comment]

will check [definition] as before, but blindly accumulate // comment.
The comment is then re-appended back into the PO files for translators
with the form:

    definition
    comment
    comment...

* lang: Fix incorrect display definitions

* lang: lang-extract: Check source encoding/charmap

* lang: Translate the degree symbol

* lang: Unbreak/cleanup DEBUG_SEC_LANG

* lang: Improve meaning of comment

* lang: Split charset conversions into an aux lib for future use

* lang: Implement lang-map.py to extract the translation symbol map

- Extracts the translatable symbol map for further use
- Computes a stable "language signature" from the map itself
- Optionally patches the binary update the symbols

* lang: Check for translation recoding problems

* lang: Implement a transliteration map to post-process translations

TRANS_CHARS is now used to replace unavailable symbols to the source
encoding, only while producing the language catalog.

* lang: Handle/check character replacements in lang-check

Filter the translation through TRANS_CHARS, so that the preview and
length check are performed correctly for expanding replacements such as
'ß' to 'ss'.

* lang: Implement lang-build.py to generate the final language catalog

* Cleanup .gitignore

* lang: Drop txt language files

* lang: Remove outdated translation scripts and obsolete docs

* lang: Update build scripts for new infrastructure

* lang: [no] Integrate accents from po/new/no.po

We now support accents natively

* lang: Remove redundant directory po/new/

* lang: Fix encoding of LCD characters in PO files

* lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL

* lang: Sort and reformat PO files for further massaging

* lang: Switch to developer (dot) comments for PO metadata

* lang: Allow the IGNORE annotation to skip extraction

* lang: Fix missing/broken language metadata in sources

* lang: Add update-pot.sh and regenerate po/Firmware.pot

* lang: Add update-po.sh and refresh all PO files

* lang: Add summary documentation about the new translation workflow

* Add more ignored files

* CI: Add new required dependencies to travis

* lang: lang-build: Improve warning message

"referenced" was really meaning that data is being duplicated.

* lang: Respect the language order as defined in config.sh

This correctly splits normal and community-made entries during language
selection.

* lang: More typos in the documentation

* lang: Check for the maximum size of each language

Each table needs to fit within LANG_SIZE_RESERVED

* lang: Properly align _SEC_LANG to page boundaries

... instead of relying on _SEC_LANG_TABLE to calculate the offset

* lang: Build support for dual-language hex files

Detect the printer type by checking the current variant type.

On printers with no xflash (MK2*), generate one hex file for each
additional language file by patching the built-in secondary language
table during the build process

* lang: Mention lang-patchsec.py

* lang: Use color() instead of tput for clarity

* lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb

* lang: Consistent use of redirection in config.sh

* lang: Stricter variant-type check for xflash support

* lang: Output size stats when building double-language hex files

* lang: Respect NO_COLOR in lang-check.py

* lang: Check for repeated/incorrect annotations

Catch errors such as "c=1 c=2"

* lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations

* lang: [it] Improve MSG_*_SKEW translation

* lang: Use INTLHEX instead of OUTHEX_P/S for configuration

We already have OUTHEX which is the compiled firmware.

Use INTLHEX for the final internationalized firmware, which is less
confusing. Also, assume it being a prefix for all generated hex
files, which reduces the number of variables set.

* lang: Move lang_map to lib.io for further use

* lang: lang-check: Accept a firmware map file to suppress unused string warnings

* lang: Use the map file to reduce useless warnings during fw-build

* lang: lang-check: Also suppress unused empty annotations

* lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation

Refresh pot file

* lang: lang-check: Do not warn about same-word translations by default

Do not warn when one-word translations such as "No" result in "No" also
in other languages, since this is common in latin languages.

Allow to re-enable the warning with --warn-same

* lang: lang-build: Handle same-source/translation efficiently

* lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings

Instead of displaying a warning, supress the warning and explicitly
translate each entry using english (which is the common/acceptable
word in these cases).

* lang: [it] Suppress more warnings

* lang: lang-check: Add intermediate "suggest" warning category

Warnings in the "suggest" category as shown as [S] as based on pure
speculation from the checking tool, such as the translation being
significantly shorter than the original.

As a result, they can be suppressed with --no-suggest

* lang: Return translation status from lang-check

- 0 if the translation only contains suggestions
- 1 if the translation contains warnings or errors

Check for the exit status in fw-build.sh, but do nothing at the moment
except printing a non-fatal error.

* lang: Remove "trim_trailing_whitespace=false" for po files

PO files got cleaned up/rewritten. We can now ensure they stay
consistent.

* lang: [sv] Re-integrate changes from 70c73cb

* lang: [no] Reintegrate changes from @pkg2000
2022-06-16 15:03:30 +02:00

2338 lines
68 KiB
Plaintext
Raw Blame History

# Translation of Prusa-Firmware into Hugarian.
#
msgid ""
msgstr ""
"Project-Id-Version: Prusa-Firmware\n"
"POT-Creation-Date: Wed 16 Mar 2022 09:25:06 AM CET\n"
"PO-Revision-Date: Wed 16 Mar 2022 09:25:06 AM CET\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: hu\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.0.7\n"
"X-Poedit-SourceCharset: UTF-8\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
#. MSG_IR_03_OR_OLDER c=18
#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.c:166
msgid " 0.3 or older"
msgstr " 0.3 vagy regebbi"
#. MSG_IR_04_OR_NEWER c=18
#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.c:165
msgid " 0.4 or newer"
msgstr " 0.4 v. ujabb"
#. MSG_FACTOR
#: ../../Firmware/ultralcd.cpp:6966
msgid " ° Fact"
msgstr ""
#. MSG_MAX
#: ../../Firmware/ultralcd.cpp:6965
msgid " ° Max"
msgstr ""
#. MSG_MIN
#: ../../Firmware/ultralcd.cpp:6964
msgid " ° Min"
msgstr ""
#. MSG_SELFTEST_FS_LEVEL c=20
#: ../../Firmware/ultralcd.cpp:8100
msgid "%s level expected"
msgstr "Vart szint: %s"
#. MSG_CANCEL c=9
#: ../../Firmware/messages.c:20 ../../Firmware/ultralcd.cpp:2279
#: ../../Firmware/ultralcd.cpp:4691
msgid ">Cancel"
msgstr ">Megsem"
#. MSG_BABYSTEPPING_Z c=15
#. Beware: must include the ':' as its last character
#: ../../Firmware/ultralcd.cpp:3024
msgid "Adjusting Z:"
msgstr "Z allitasa:"
#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
#: ../../Firmware/ultralcd.cpp:8395
msgid "All correct"
msgstr "Minden rendben"
#. MSG_WIZARD_DONE c=20 r=3
#: ../../Firmware/messages.c:120 ../../Firmware/ultralcd.cpp:5031
#: ../../Firmware/ultralcd.cpp:5040
msgid "All is done. Happy printing!"
msgstr "Keszen vagyunk. Jo nyomtatast!"
#. MSG_SORT_ALPHA c=8
#: ../../Firmware/messages.c:143 ../../Firmware/ultralcd.cpp:5264
msgid "Alphabet"
msgstr "Abece"
#: ../../Firmware/ultralcd.cpp:5168
msgid "Always"
msgstr ""
#. MSG_AMBIENT c=14
#: ../../Firmware/ultralcd.cpp:1717
msgid "Ambient"
msgstr "Kornyezet"
#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
#: ../../Firmware/ultralcd.cpp:3347
msgid "Are left and right Z~carriages all up?"
msgstr "A Z tengely a felso vegponton van?"
#. MSG_SOUND_BLIND c=7
#: ../../Firmware/messages.c:148 ../../Firmware/ultralcd.cpp:5319
msgid "Assist"
msgstr "Seged"
#. MSG_AUTO c=6
#: ../../Firmware/messages.c:162 ../../Firmware/ultralcd.cpp:6931
msgid "Auto"
msgstr "Autom."
#. MSG_ADJUSTZ
#: ../../Firmware/ultralcd.cpp:3150
msgid "Auto adjust Z?"
msgstr ""
#. MSG_AUTO_HOME c=18
#: ../../Firmware/Marlin_main.cpp:3472 ../../Firmware/messages.c:11
#: ../../Firmware/ultralcd.cpp:5760
msgid "Auto home"
msgstr ""
#. MSG_AUTO_POWER c=10
#: ../../Firmware/messages.c:107 ../../Firmware/ultralcd.cpp:5224
#: ../../Firmware/ultralcd.cpp:6846
msgid "Auto power"
msgstr "Auto ero"
#. MSG_AUTOLOAD_FILAMENT c=18
#: ../../Firmware/ultralcd.cpp:6637
msgid "AutoLoad filament"
msgstr "Fil. auto.betolt."
#. MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
#: ../../Firmware/ultralcd.cpp:4309
msgid ""
"Autoloading filament available only when filament sensor is turned on..."
msgstr "Filament autom. betolteste csak bekapcs. fil. szenzorral mukodik."
#. MSG_AUTOLOADING_ENABLED c=20 r=4
#: ../../Firmware/ultralcd.cpp:2638
msgid ""
"Autoloading filament is active, just press the knob and insert filament..."
msgstr "Autom. betoltes be, nyomd meg a gombot es helyzed be a filamentet."
#. MSG_SELFTEST_AXIS c=16
#: ../../Firmware/ultralcd.cpp:8079
msgid "Axis"
msgstr "Tengely"
#. MSG_SELFTEST_AXIS_LENGTH c=20
#: ../../Firmware/ultralcd.cpp:8078
msgid "Axis length"
msgstr "Tengely hossz"
#. MSG_BACK c=18
#: ../../Firmware/messages.c:66 ../../Firmware/ultralcd.cpp:2417
#: ../../Firmware/ultralcd.cpp:3103 ../../Firmware/ultralcd.cpp:6928
#: ../../Firmware/ultralcd.cpp:8971
msgid "Back"
msgstr "Vissza"
#. MSG_BED c=13
#: ../../Firmware/Marlin_main.cpp:2155 ../../Firmware/Marlin_main.cpp:5196
#: ../../Firmware/Marlin_main.cpp:5248 ../../Firmware/messages.c:14
#: ../../Firmware/ultralcd.cpp:1715 ../../Firmware/ultralcd.cpp:6790
#: ../../Firmware/ultralcd.cpp:6958
msgid "Bed"
msgstr "Asztal"
#. MSG_BED_HEATING c=20
#: ../../Firmware/Marlin_main.cpp:6700 ../../Firmware/messages.c:16
#: ../../Firmware/ultralcd.cpp:599
msgid "Bed Heating"
msgstr "Asztal futes"
#. MSG_BED_DONE c=20
#: ../../Firmware/Marlin_main.cpp:6739 ../../Firmware/messages.c:15
#: ../../Firmware/ultralcd.cpp:602
msgid "Bed done"
msgstr "Asztal kesz"
#. MSG_BED_CORRECTION_MENU c=18
#: ../../Firmware/ultralcd.cpp:5782
msgid "Bed level correct"
msgstr "Szint. korrekcio"
#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
#: ../../Firmware/Marlin_main.cpp:2317 ../../Firmware/Marlin_main.cpp:3193
#: ../../Firmware/Marlin_main.cpp:3203
#: ../../Firmware/mesh_bed_calibration.cpp:2862
#: ../../Firmware/mesh_bed_calibration.cpp:2870
#: ../../Firmware/mesh_bed_calibration.cpp:2895 ../../Firmware/messages.c:17
msgid ""
"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
"reset."
msgstr ""
"Sikertelen asztal szintezes. A szenzor nem kapcsolt. Piszok a fuvokan? Varom "
"az ujrainditast."
#. MSG_SELFTEST_BEDHEATER c=20
#: ../../Firmware/ultralcd.cpp:8036
msgid "Bed/Heater"
msgstr "Asztal/Fej futes"
#. MSG_BELT_STATUS c=18
#: ../../Firmware/messages.c:19 ../../Firmware/ultralcd.cpp:1770
#: ../../Firmware/ultralcd.cpp:2034
msgid "Belt status"
msgstr "Szij allapot"
#. MSG_BELTTEST c=18
#: ../../Firmware/ultralcd.cpp:5762
msgid "Belt test"
msgstr "Szij teszt"
#. MSG_RECOVER_PRINT c=20 r=2
#: ../../Firmware/Marlin_main.cpp:1634 ../../Firmware/Marlin_main.cpp:1656
#: ../../Firmware/messages.c:84
msgid "Blackout occurred. Recover print?"
msgstr "Aramkieses volt, nyomt. folytatasa?"
#. MSG_BRIGHT c=6
#: ../../Firmware/messages.c:160 ../../Firmware/ultralcd.cpp:6931
msgid "Bright"
msgstr "Fenyes"
#. MSG_BRIGHTNESS c=18
#: ../../Firmware/messages.c:156 ../../Firmware/ultralcd.cpp:5710
#: ../../Firmware/ultralcd.cpp:6856
msgid "Brightness"
msgstr "Fenyero"
#. MSG_CALIBRATE_BED c=18
#: ../../Firmware/ultralcd.cpp:5771
msgid "Calibrate XYZ"
msgstr "XYZ kalibracio"
#. MSG_HOMEYZ c=18
#: ../../Firmware/messages.c:54 ../../Firmware/ultralcd.cpp:5768
#: ../../Firmware/ultralcd.cpp:5773
msgid "Calibrate Z"
msgstr "Z kalibracio"
#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
#: ../../Firmware/ultralcd.cpp:3310
msgid ""
"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""
"XYZ kalibralas. Tekerd a gombot addig, amig a Z tengely a felso vegpontra "
"nem er, majd nyomd meg ha keszen vagy."
#. MSG_CALIBRATE_Z_AUTO c=20 r=2
#: ../../Firmware/Marlin_main.cpp:2273 ../../Firmware/messages.c:21
#: ../../Firmware/ultralcd.cpp:643
msgid "Calibrating Z"
msgstr "Z kalibralasa"
#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
#: ../../Firmware/ultralcd.cpp:3309
msgid ""
"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""
"Z kalibralas. Tekerd a gombot addig, amig a Z tengely a felso vegpontra nem "
"er, majd nyomd meg ha keszen vagy."
#. MSG_CALIBRATING_HOME c=20
#: ../../Firmware/ultralcd.cpp:8397
msgid "Calibrating home"
msgstr "Home poz. kalibralas"
#. MSG_CALIBRATION c=18
#: ../../Firmware/messages.c:70 ../../Firmware/ultralcd.cpp:6648
msgid "Calibration"
msgstr "Kalibracio"
#. MSG_HOMEYZ_DONE c=20
#: ../../Firmware/ultralcd.cpp:656
msgid "Calibration done"
msgstr "Kalibracio kesz"
#. MSG_SD_REMOVED c=20
#: ../../Firmware/ultralcd.cpp:8844
msgid "Card removed"
msgstr "Kartya eltavolitva"
#. MSG_CNG_SDCARD
#: ../../Firmware/ultralcd.cpp:6597
msgid "Change SD card"
msgstr ""
#. MSG_CHANGE_EXTR c=20
#: ../../Firmware/ultralcd.cpp:6633
msgid "Change extruder"
msgstr ""
#. MSG_FILAMENTCHANGE c=18
#: ../../Firmware/messages.c:45 ../../Firmware/ultralcd.cpp:6555
#: ../../Firmware/ultralcd.cpp:6799
msgid "Change filament"
msgstr "Filament csere"
#. MSG_CHANGE_SUCCESS c=20
#: ../../Firmware/ultralcd.cpp:2484
msgid "Change success!"
msgstr "Csere sikerult!"
#. MSG_CORRECTLY c=20
#: ../../Firmware/ultralcd.cpp:2552
msgid "Changed correctly?"
msgstr "Sikerult a csere?"
#. MSG_CHECKING_X c=20
#: ../../Firmware/messages.c:23 ../../Firmware/ultralcd.cpp:7240
#: ../../Firmware/ultralcd.cpp:8387
msgid "Checking X axis"
msgstr "X tengely ellenorzes"
#. MSG_CHECKING_Y c=20
#: ../../Firmware/messages.c:24 ../../Firmware/ultralcd.cpp:7249
#: ../../Firmware/ultralcd.cpp:8388
msgid "Checking Y axis"
msgstr "Y tengely ellenorzes"
#. MSG_SELFTEST_CHECK_Z c=20
#: ../../Firmware/ultralcd.cpp:8389
msgid "Checking Z axis"
msgstr "Z tengely ellenorzes"
#. MSG_SELFTEST_CHECK_BED c=20
#: ../../Firmware/messages.c:96 ../../Firmware/ultralcd.cpp:8390
msgid "Checking bed"
msgstr "Asztal ellenorzese"
#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
#: ../../Firmware/ultralcd.cpp:8386
msgid "Checking endstops"
msgstr "Vegallaskapcs. ellen"
#. MSG_CHECKING_FILE c=17
#: ../../Firmware/ultralcd.cpp:8485
msgid "Checking file"
msgstr "Fajl ellenorzese"
#. MSG_SELFTEST_CHECK_HOTEND c=20
#: ../../Firmware/ultralcd.cpp:8392
msgid "Checking hotend"
msgstr "Hotend ellenorzese"
#. MSG_SELFTEST_CHECK_FSENSOR c=20
#: ../../Firmware/messages.c:97 ../../Firmware/ultralcd.cpp:8393
#: ../../Firmware/ultralcd.cpp:8394
msgid "Checking sensors"
msgstr "Szenz. ellenorzese"
#. MSG_CHECKS c=18
#: ../../Firmware/ultralcd.cpp:5625
msgid "Checks"
msgstr "Ellenorzesek"
#. MSG_NOT_COLOR c=19
#: ../../Firmware/ultralcd.cpp:2555
msgid "Color not correct"
msgstr "Szin nem jo"
#. MSG_COMMUNITY_MADE c=18
#: ../../Firmware/messages.c:25 ../../Firmware/ultralcd.cpp:4489
msgid "Community made"
msgstr "Kozossegi"
#: ../../Firmware/ultralcd.cpp:8619
msgid "Connect printer to"
msgstr ""
#. MSG_CONTINUE_SHORT c=5
#: ../../Firmware/messages.c:154 ../../Firmware/ultralcd.cpp:5564
msgid "Cont."
msgstr "Folyt"
#. MSG_COOLDOWN c=18
#: ../../Firmware/messages.c:27 ../../Firmware/ultralcd.cpp:2441
msgid "Cooldown"
msgstr "Lehutes"
#. MSG_COPY_SEL_LANG c=20 r=3
#: ../../Firmware/ultralcd.cpp:4427
msgid "Copy selected language?"
msgstr "Kivalasztott nyelv masolasa?"
#. MSG_CRASH c=7
#: ../../Firmware/messages.c:28 ../../Firmware/ultralcd.cpp:1533
#: ../../Firmware/ultralcd.cpp:1574 ../../Firmware/ultralcd.cpp:1584
msgid "Crash"
msgstr "Utkozes"
#. MSG_CRASHDETECT c=13
#: ../../Firmware/messages.c:30 ../../Firmware/ultralcd.cpp:5201
#: ../../Firmware/ultralcd.cpp:5202 ../../Firmware/ultralcd.cpp:5204
#: ../../Firmware/ultralcd.cpp:6836 ../../Firmware/ultralcd.cpp:6837
#: ../../Firmware/ultralcd.cpp:6839
msgid "Crash det."
msgstr "Utkozes erz."
#. MSG_CRASH_DETECTED c=20
#: ../../Firmware/Marlin_main.cpp:645 ../../Firmware/messages.c:29
msgid "Crash detected."
msgstr "Utkozes erzekelve."
#. MSG_CRASH_RESUME c=20 r=3
#: ../../Firmware/Marlin_main.cpp:653
msgid "Crash detected. Resume print?"
msgstr "Utkozes erzekelve. Folytassam a nyomtatast?"
#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
#: ../../Firmware/ultralcd.cpp:4281
msgid ""
"Crash detection can\n"
"be turned on only in\n"
"Normal mode"
msgstr ""
"Utkozes erzekeles csak\n"
"normal modban\n"
"kapcsolhato be"
#. MSG_CURRENT c=19
#: ../../Firmware/ultralcd.cpp:5913
msgid "Current"
msgstr ""
#. MSG_CUT_FILAMENT c=17
#: ../../Firmware/messages.c:63 ../../Firmware/ultralcd.cpp:6218
#: ../../Firmware/ultralcd.cpp:6219 ../../Firmware/ultralcd.cpp:6220
#: ../../Firmware/ultralcd.cpp:6221 ../../Firmware/ultralcd.cpp:6222
#: ../../Firmware/ultralcd.cpp:6628
msgid "Cut filament"
msgstr "Filament vagasa"
#. MSG_CUTTER c=9
#: ../../Firmware/messages.c:130 ../../Firmware/ultralcd.cpp:5163
#: ../../Firmware/ultralcd.cpp:5168 ../../Firmware/ultralcd.cpp:5173
msgid "Cutter"
msgstr "Vago"
#. MSG_MMU_CUTTING_FIL c=18
#: ../../Firmware/mmu.cpp:1387
msgid "Cutting filament"
msgstr "Filament vagasa"
#. MSG_DATE c=17
#: ../../Firmware/ultralcd.cpp:1975
msgid "Date:"
msgstr "Datum:"
#. MSG_DIM c=6
#: ../../Firmware/messages.c:161 ../../Firmware/ultralcd.cpp:6931
msgid "Dim"
msgstr "Sotet"
#. MSG_DISABLE_STEPPERS c=18
#: ../../Firmware/ultralcd.cpp:5662
msgid "Disable steppers"
msgstr "Motorok kikapcsol."
#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
#: ../../Firmware/Marlin_main.cpp:1579 ../../Firmware/Marlin_main.cpp:3612
#: ../../Firmware/messages.c:13
msgid ""
"Distance between tip of the nozzle and the bed surface has not been set yet. "
"Please follow the manual, chapter First steps, section First layer "
"calibration."
msgstr ""
"A fuvoka vege es a targyasztal felulete kozotti tavolsag nincs beallitva. "
"Kerlek, kovesd az utmutato Elso lepesek fejezeteben az Elso reteg kalibracio "
"bekezdest."
#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
#: ../../Firmware/ultralcd.cpp:5005
msgid ""
"Do you want to repeat last step to readjust distance between nozzle and "
"heatbed?"
msgstr ""
"Meg szeretned ismetelni az utolso lepest, hogy finomhangold a fuvoka es az "
"asztal kozotti tavolsagot?"
#: ../../Firmware/mmu.cpp:872
msgid "Do you want to switch extruder?"
msgstr ""
#. MSG_CLEAN_NOZZLE_E c=20 r=8
#: ../../Firmware/ultralcd.cpp:4607
msgid "E calibration finished. Please clean the nozzle. Click when done."
msgstr ""
#. MSG_EXTRUDER_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:5074
msgid "E-correct:"
msgstr "E-korrekcio:"
#. MSG_ERROR c=10
#: ../../Firmware/messages.c:31 ../../Firmware/ultralcd.cpp:2616
msgid "ERROR:"
msgstr "HIBA:"
#. MSG_FSENS_NOT_RESPONDING c=20 r=4
#: ../../Firmware/ultralcd.cpp:4322
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr "HIBA: A fil. szenzor nem valaszol, ellenorizd a csatlakozast."
#. MSG_EJECT_FILAMENT c=17
#: ../../Firmware/messages.c:62 ../../Firmware/ultralcd.cpp:6196
#: ../../Firmware/ultralcd.cpp:6197 ../../Firmware/ultralcd.cpp:6198
#: ../../Firmware/ultralcd.cpp:6199 ../../Firmware/ultralcd.cpp:6200
#: ../../Firmware/ultralcd.cpp:6626
msgid "Eject filament"
msgstr "Filament kiadasa"
#. MSG_EJECTING_FILAMENT c=20
#: ../../Firmware/mmu.cpp:1415
msgid "Ejecting filament"
msgstr "Filament kiadasa"
#. MSG_SELFTEST_ENDSTOP c=16
#: ../../Firmware/ultralcd.cpp:8049
msgid "Endstop"
msgstr "Vegallaskapcsolo"
#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
#: ../../Firmware/ultralcd.cpp:8054
msgid "Endstop not hit"
msgstr "Vegallask. nem kapcs"
#. MSG_SELFTEST_ENDSTOPS c=20
#: ../../Firmware/ultralcd.cpp:8040
msgid "Endstops"
msgstr "Vegallaskapcsolok"
#. MSG_EXTRUDER c=17
#: ../../Firmware/Marlin_main.cpp:8967 ../../Firmware/messages.c:32
#: ../../Firmware/ultralcd.cpp:4228
msgid "Extruder"
msgstr ""
#. MSG_EXTRUDER_1 c=17
#: ../../Firmware/ultralcd.cpp:6260
msgid "Extruder 1"
msgstr ""
#. MSG_EXTRUDER_2 c=17
#: ../../Firmware/ultralcd.cpp:6261
msgid "Extruder 2"
msgstr ""
#. MSG_EXTRUDER_3 c=17
#: ../../Firmware/ultralcd.cpp:6262
msgid "Extruder 3"
msgstr ""
#. MSG_EXTRUDER_4 c=17
#: ../../Firmware/ultralcd.cpp:6263
msgid "Extruder 4"
msgstr ""
#. MSG_EXTRUDER_FAN_SPEED c=16
#: ../../Firmware/messages.c:37 ../../Firmware/ultralcd.cpp:1438
#: ../../Firmware/ultralcd.cpp:8403
msgid "Extruder fan:"
msgstr "Extruder vent.:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:2030
msgid "Extruder info"
msgstr ""
#. MSG_FSENSOR_AUTOLOAD c=13
#: ../../Firmware/messages.c:50 ../../Firmware/ultralcd.cpp:5089
#: ../../Firmware/ultralcd.cpp:5097 ../../Firmware/ultralcd.cpp:5108
#: ../../Firmware/ultralcd.cpp:5110
msgid "F. autoload"
msgstr "F. autobetolt"
#. MSG_FS_ACTION c=10
#: ../../Firmware/messages.c:153 ../../Firmware/ultralcd.cpp:5564
#: ../../Firmware/ultralcd.cpp:5567
msgid "FS Action"
msgstr "FSz akcio"
#. MSG_FS_V_03_OR_OLDER c=18
#: ../../Firmware/Marlin_main.cpp:9927
msgid "FS v0.3 or older"
msgstr "FS v0.3 v. regebbi"
#. MSG_FS_V_04_OR_NEWER c=18
#: ../../Firmware/Marlin_main.cpp:9919
msgid "FS v0.4 or newer"
msgstr "FS v0.4 vagy ujabb"
#. MSG_FAIL_STATS c=18
#: ../../Firmware/ultralcd.cpp:6656
msgid "Fail stats"
msgstr "Hiba statisztika"
#. MSG_MMU_FAIL_STATS c=18
#: ../../Firmware/ultralcd.cpp:6659
msgid "Fail stats MMU"
msgstr "MMU hiba stat."
#. MSG_FALSE_TRIGGERING c=20
#: ../../Firmware/ultralcd.cpp:8095
msgid "False triggering"
msgstr "Hamis kivalto ok"
#. MSG_FAN_SPEED c=14
#: ../../Firmware/messages.c:36 ../../Firmware/ultralcd.cpp:6792
#: ../../Firmware/ultralcd.cpp:6960
msgid "Fan speed"
msgstr "Vent. sebesseg"
#. MSG_SELFTEST_FAN c=20
#: ../../Firmware/messages.c:93 ../../Firmware/ultralcd.cpp:8207
#: ../../Firmware/ultralcd.cpp:8383 ../../Firmware/ultralcd.cpp:8384
#: ../../Firmware/ultralcd.cpp:8385
msgid "Fan test"
msgstr "Ventillator teszt"
#. MSG_FANS_CHECK c=13
#: ../../Firmware/messages.c:33 ../../Firmware/ultralcd.cpp:5671
#: ../../Firmware/ultralcd.cpp:6825
msgid "Fans check"
msgstr "Vent.proba"
#. MSG_FIL_RUNOUTS c=15
#: ../../Firmware/messages.c:34 ../../Firmware/ultralcd.cpp:1532
#: ../../Firmware/ultralcd.cpp:1573 ../../Firmware/ultralcd.cpp:1639
#: ../../Firmware/ultralcd.cpp:1641
msgid "Fil. runouts"
msgstr "Fil. kifutasok"
#. MSG_FSENSOR c=12
#: ../../Firmware/messages.c:51 ../../Firmware/ultralcd.cpp:3854
#: ../../Firmware/ultralcd.cpp:5088 ../../Firmware/ultralcd.cpp:5094
#: ../../Firmware/ultralcd.cpp:5104 ../../Firmware/ultralcd.cpp:6806
#: ../../Firmware/ultralcd.cpp:6810 ../../Firmware/ultralcd.cpp:6814
msgid "Fil. sensor"
msgstr "Fil. szenzor"
#: ../../Firmware/Marlin_main.cpp:3875 ../../Firmware/Marlin_main.cpp:12123
msgid "Fil. sensor response is poor, disable it?"
msgstr ""
#. MSG_FILAMENT c=17
#: ../../Firmware/Marlin_main.cpp:8936 ../../Firmware/Marlin_main.cpp:8963
#: ../../Firmware/messages.c:35 ../../Firmware/ultralcd.cpp:4691
msgid "Filament"
msgstr ""
#. MSG_FILAMENT_CLEAN c=20 r=2
#: ../../Firmware/messages.c:39 ../../Firmware/ultralcd.cpp:2624
#: ../../Firmware/ultralcd.cpp:2630
msgid "Filament extruding & with correct color?"
msgstr "Filament es a szine rendben?"
#. MSG_NOT_LOADED c=19
#: ../../Firmware/ultralcd.cpp:2554
msgid "Filament not loaded"
msgstr "Fil. nincs betoltve"
#. MSG_SELFTEST_FILAMENT_SENSOR c=17
#: ../../Firmware/messages.c:99 ../../Firmware/ultralcd.cpp:8090
#: ../../Firmware/ultralcd.cpp:8094 ../../Firmware/ultralcd.cpp:8098
#: ../../Firmware/ultralcd.cpp:8412
msgid "Filament sensor"
msgstr "Filament szenzor"
#. MSG_FILAMENT_USED c=19
#: ../../Firmware/ultralcd.cpp:2703
msgid "Filament used"
msgstr "Felhasznalt filam."
#. MSG_FILE_INCOMPLETE c=20 r=3
#: ../../Firmware/ultralcd.cpp:8539
msgid "File incomplete. Continue anyway?"
msgstr "A fajl vege hianyzik. Folytatod igy is?"
#. MSG_FINISHING_MOVEMENTS c=20
#: ../../Firmware/messages.c:47 ../../Firmware/ultralcd.cpp:6377
#: ../../Firmware/ultralcd.cpp:6697
msgid "Finishing movements"
msgstr "Mozdulat befejezese"
#. MSG_FIRMWARE c=8
#: ../../Firmware/messages.c:172 ../../Firmware/ultralcd.cpp:5474
#: ../../Firmware/ultralcd.cpp:5477 ../../Firmware/ultralcd.cpp:5480
#: ../../Firmware/ultralcd.cpp:5483
msgid "Firmware"
msgstr ""
#. MSG_V2_CALIBRATION c=18
#: ../../Firmware/messages.c:126 ../../Firmware/ultralcd.cpp:5758
#: ../../Firmware/ultralcd.cpp:6482
msgid "First layer cal."
msgstr "Elso reteg kal."
#. MSG_WIZARD_SELFTEST c=20 r=8
#: ../../Firmware/ultralcd.cpp:4926
msgid "First, I will run the selftest to check most common assembly problems."
msgstr ""
"Elsokent lefuttatom az onellenorzest, hogy megnezzem a leggyakoribb "
"osszeszerelesi problemakat."
#. MSG_MMU_FIX_ISSUE c=20 r=4
#: ../../Firmware/mmu.cpp:727
msgid "Fix the issue and then press button on MMU unit."
msgstr "Hozd helyre a hibat, majd nyomd meg a gombot az MMU egysegen."
#. MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY c=8
#: ../../Firmware/messages.c:173 ../../Firmware/ultralcd.cpp:5255
#: ../../Firmware/ultralcd.cpp:5274
msgid "FlashAir"
msgstr ""
#. MSG_FLOW c=15
#: ../../Firmware/ultralcd.cpp:6793
msgid "Flow"
msgstr ""
#. MSG_SELFTEST_PART_FAN c=20
#: ../../Firmware/messages.c:90 ../../Firmware/ultralcd.cpp:8060
#: ../../Firmware/ultralcd.cpp:8213 ../../Firmware/ultralcd.cpp:8218
msgid "Front print fan?"
msgstr "Elso targyhuto vent?"
#. MSG_BED_CORRECTION_FRONT c=14
#: ../../Firmware/ultralcd.cpp:3106
msgid "Front side[μm]"
msgstr "Elulso old[μm]"
#. MSG_SELFTEST_FANS c=20
#: ../../Firmware/ultralcd.cpp:8084
msgid "Front/left fans"
msgstr "Elso/bal ventillator"
#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
#: ../../Firmware/util.cpp:414
msgid "G-code sliced for a different level. Continue?"
msgstr "A G-kod mas szintre lett elokesztve. Folytassam?"
#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
#: ../../Firmware/util.cpp:420
msgid ""
"G-code sliced for a different level. Please re-slice the model again. Print "
"cancelled."
msgstr ""
"A G-kod mas szintre lett elokesztve. Szeleteld ujra a modellt. Nyomtatas "
"megallitva."
#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
#: ../../Firmware/messages.c:136 ../../Firmware/util.cpp:331
#: ../../Firmware/util.cpp:480
msgid "G-code sliced for a different printer type. Continue?"
msgstr "A G-kod mas nyomtato tipusra lett elokesztve. Folytassam?"
#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
#: ../../Firmware/messages.c:137 ../../Firmware/util.cpp:337
#: ../../Firmware/util.cpp:486
msgid ""
"G-code sliced for a different printer type. Please re-slice the model again. "
"Print cancelled."
msgstr ""
"A G-kod mas nyomtato tipusra lett elokesztve. Szeleteld ujra a modellt. "
"Nyomtatas megallitva."
#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
#: ../../Firmware/util.cpp:381
msgid "G-code sliced for a newer firmware. Continue?"
msgstr "A G-kod ujabb firmverre lett elokesztve. Folytassam?"
#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
#: ../../Firmware/util.cpp:387
msgid ""
"G-code sliced for a newer firmware. Please update the firmware. Print "
"cancelled."
msgstr ""
"A G-kod ujabb firmverre lett elokesztve. Frissitsd a nyomtato firmveret. "
"Nyomtatas megallitva."
#. MSG_GCODE c=8
#: ../../Firmware/messages.c:135 ../../Firmware/ultralcd.cpp:5515
#: ../../Firmware/ultralcd.cpp:5518 ../../Firmware/ultralcd.cpp:5521
#: ../../Firmware/ultralcd.cpp:5524
msgid "Gcode"
msgstr ""
#. MSG_HW_SETUP c=18
#: ../../Firmware/messages.c:104 ../../Firmware/ultralcd.cpp:5532
#: ../../Firmware/ultralcd.cpp:5586 ../../Firmware/ultralcd.cpp:5678
msgid "HW Setup"
msgstr "HW beallitas"
#. MSG_SELFTEST_HEATERTHERMISTOR c=20
#: ../../Firmware/ultralcd.cpp:8032
msgid "Heater/Thermistor"
msgstr "Futotest/Termisztor"
#. MSG_HEATING c=20
#: ../../Firmware/Marlin_main.cpp:6640 ../../Firmware/messages.c:52
#: ../../Firmware/ultralcd.cpp:591
msgid "Heating"
msgstr "Futes folyamatban"
#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:9840
msgid "Heating disabled by safety timer."
msgstr "A bizonsagi idozito leallitotta a futest"
#. MSG_HEATING_COMPLETE c=20
#: ../../Firmware/Marlin_main.cpp:6673 ../../Firmware/messages.c:53
#: ../../Firmware/ultralcd.cpp:594
msgid "Heating done."
msgstr "Futes kesz."
#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
#: ../../Firmware/messages.c:124 ../../Firmware/ultralcd.cpp:4902
msgid ""
"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
"setup process, in which the Z-axis will be calibrated. Then, you will be "
"ready to print."
msgstr ""
"Szia, en vagyok az eredeti Prusa i3 nyomtatod. Vegigvezetlek egy rovid "
"beallitasi folyamaton, amelyben a Z tengelyt kalibralom. Utana mar "
"nyomtathatsz is."
#. MSG_WIZARD_WELCOME c=20 r=7
#: ../../Firmware/messages.c:123 ../../Firmware/ultralcd.cpp:4905
msgid ""
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
"through the setup process?"
msgstr ""
"Szia, en vagyok az eredeti Prusa i3 nyomtatod. Szeretned, ha vegigvezetnelek "
"a beallitasi folyamaton?"
#. MSG_HIGH_POWER c=10
#: ../../Firmware/messages.c:106 ../../Firmware/ultralcd.cpp:5218
#: ../../Firmware/ultralcd.cpp:5227 ../../Firmware/ultralcd.cpp:6844
#: ../../Firmware/ultralcd.cpp:6847
msgid "High power"
msgstr "Magas ero"
#. MSG_WIZARD_XYZ_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:4935
msgid "I will run xyz calibration now. It will take approx. 12 mins."
msgstr "Lefuttatom az XYZ kalibraciot. Ez kb. 12 percet vesz igenybe."
#. MSG_WIZARD_Z_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:4943
msgid "I will run z calibration now."
msgstr "Lefuttatom a Z kalibraciot."
#. MSG_ADDITIONAL_SHEETS c=20 r=9
#: ../../Firmware/ultralcd.cpp:5013
msgid ""
"If you have additional steel sheets, calibrate their presets in Settings - "
"HW Setup - Steel sheets."
msgstr ""
"Ha tobb acellapod van, kalibrald be oket a Beallitasok - HW beall. - "
"Acellapok menupont alatt."
#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60
#: ../../Firmware/mesh_bed_calibration.cpp:2531
msgid "Improving bed calibration point"
msgstr ""
#. MSG_INFO_SCREEN c=18
#: ../../Firmware/messages.c:118 ../../Firmware/ultralcd.cpp:6536
msgid "Info screen"
msgstr "Info kepernyo"
#. MSG_INIT_SDCARD
#: ../../Firmware/ultralcd.cpp:6604
msgid "Init. SD card"
msgstr ""
#. MSG_INSERT_FILAMENT c=20
#: ../../Firmware/ultralcd.cpp:2472
msgid "Insert filament"
msgstr "Helyezd be a filam."
#. MSG_FILAMENT_LOADING_T0 c=20 r=4
#: ../../Firmware/messages.c:41 ../../Firmware/mmu.cpp:976
#: ../../Firmware/mmu.cpp:1020
msgid "Insert filament into extruder 1. Click when done."
msgstr ""
#. MSG_FILAMENT_LOADING_T1 c=20 r=4
#: ../../Firmware/messages.c:42 ../../Firmware/mmu.cpp:973
#: ../../Firmware/mmu.cpp:1017
msgid "Insert filament into extruder 2. Click when done."
msgstr ""
#. MSG_FILAMENT_LOADING_T2 c=20 r=4
#: ../../Firmware/messages.c:43 ../../Firmware/mmu.cpp:974
#: ../../Firmware/mmu.cpp:1018
msgid "Insert filament into extruder 3. Click when done."
msgstr ""
#. MSG_FILAMENT_LOADING_T3 c=20 r=4
#: ../../Firmware/messages.c:44 ../../Firmware/mmu.cpp:975
#: ../../Firmware/mmu.cpp:1019
msgid "Insert filament into extruder 4. Click when done."
msgstr ""
#. MSG_INSERT_FIL c=20 r=6
#: ../../Firmware/ultralcd.cpp:7285
msgid ""
"Insert the filament (do not load it) into the extruder and then press the "
"knob."
msgstr ""
"Helyezd be a filamentet az extruderbe (ne toltsd be), majd nyomtd meg a "
"gombot."
#. MSG_FILAMENT_LOADED c=20 r=2
#: ../../Firmware/messages.c:40 ../../Firmware/ultralcd.cpp:4711
#: ../../Firmware/ultralcd.cpp:4968 ../../Firmware/ultralcd.cpp:4971
msgid "Is filament loaded?"
msgstr "Filament behelyezve?"
#. MSG_STEEL_SHEET_CHECK c=20 r=2
#: ../../Firmware/Marlin_main.cpp:3513 ../../Firmware/Marlin_main.cpp:5315
#: ../../Firmware/messages.c:111 ../../Firmware/ultralcd.cpp:4944
msgid "Is steel sheet on heatbed?"
msgstr "Rajta van az acellap a targyasztalon?"
#. MSG_ITERATION c=12
#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.c:55
msgid "Iteration"
msgstr "Iteracio"
#. MSG_LAST_PRINT c=18
#: ../../Firmware/messages.c:58 ../../Firmware/ultralcd.cpp:1460
#: ../../Firmware/ultralcd.cpp:1608
msgid "Last print"
msgstr "Utolso nyomtatas"
#. MSG_LAST_PRINT_FAILURES c=20
#: ../../Firmware/messages.c:59 ../../Firmware/ultralcd.cpp:1481
#: ../../Firmware/ultralcd.cpp:1571 ../../Firmware/ultralcd.cpp:1581
#: ../../Firmware/ultralcd.cpp:1638
msgid "Last print failures"
msgstr "Utolso nyomt. hibak"
#. MSG_LEFT c=10
#: ../../Firmware/ultralcd.cpp:2834
msgid "Left"
msgstr "Bal"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#: ../../Firmware/messages.c:91 ../../Firmware/ultralcd.cpp:8066
#: ../../Firmware/ultralcd.cpp:8213 ../../Firmware/ultralcd.cpp:8218
msgid "Left hotend fan?"
msgstr "Bal hotend vent.?"
#. MSG_BED_CORRECTION_LEFT c=14
#: ../../Firmware/ultralcd.cpp:3104
msgid "Left side [μm]"
msgstr "Bal [μm]"
#. MSG_BL_HIGH c=12
#: ../../Firmware/messages.c:157 ../../Firmware/ultralcd.cpp:6929
msgid "Level Bright"
msgstr "Fenyes szint"
#. MSG_BL_LOW c=12
#: ../../Firmware/messages.c:158 ../../Firmware/ultralcd.cpp:6930
msgid "Level Dimmed"
msgstr "Sotet szint"
#. MSG_LIN_CORRECTION c=18
#: ../../Firmware/ultralcd.cpp:5686
msgid "Lin. correction"
msgstr "Lin. korrekcio"
#. MSG_BABYSTEP_Z c=18
#: ../../Firmware/messages.c:12 ../../Firmware/ultralcd.cpp:5698
#: ../../Firmware/ultralcd.cpp:6551
msgid "Live adjust Z"
msgstr "Z magassag beall."
#. MSG_LOAD_ALL c=17
#: ../../Firmware/ultralcd.cpp:6151
msgid "Load all"
msgstr "Osszes betolt."
#. MSG_LOAD_FILAMENT c=17
#: ../../Firmware/messages.c:60 ../../Firmware/ultralcd.cpp:6152
#: ../../Firmware/ultralcd.cpp:6153 ../../Firmware/ultralcd.cpp:6154
#: ../../Firmware/ultralcd.cpp:6155 ../../Firmware/ultralcd.cpp:6159
#: ../../Firmware/ultralcd.cpp:6170 ../../Firmware/ultralcd.cpp:6171
#: ../../Firmware/ultralcd.cpp:6172 ../../Firmware/ultralcd.cpp:6173
#: ../../Firmware/ultralcd.cpp:6174 ../../Firmware/ultralcd.cpp:6621
#: ../../Firmware/ultralcd.cpp:6642
msgid "Load filament"
msgstr "Filament betolt."
#. MSG_LOAD_TO_NOZZLE c=18
#: ../../Firmware/ultralcd.cpp:6622
msgid "Load to nozzle"
msgstr "Betolt. fuvokahoz"
#. MSG_LOADING_COLOR c=20
#: ../../Firmware/ultralcd.cpp:2506
msgid "Loading color"
msgstr "Szin tisztitasa"
#. MSG_LOADING_FILAMENT c=20
#: ../../Firmware/Marlin_main.cpp:3846 ../../Firmware/messages.c:61
#: ../../Firmware/mmu.cpp:882 ../../Firmware/mmu.cpp:995
#: ../../Firmware/mmu.cpp:1036 ../../Firmware/mmu.cpp:1037
#: ../../Firmware/mmu.cpp:1353 ../../Firmware/mmu.cpp:1365
#: ../../Firmware/ultralcd.cpp:2517 ../../Firmware/ultralcd.cpp:4806
msgid "Loading filament"
msgstr "Filament betoltese"
#. MSG_LOOSE_PULLEY c=20
#: ../../Firmware/ultralcd.cpp:8072
msgid "Loose pulley"
msgstr "Laza szijtarcsa"
#. MSG_SOUND_LOUD c=7
#: ../../Firmware/messages.c:146 ../../Firmware/ultralcd.cpp:5310
#: ../../Firmware/ultralcd.cpp:5322
msgid "Loud"
msgstr "Hangos"
#. MSG_M117_V2_CALIBRATION c=25
#: ../../Firmware/first_lay_cal.cpp:28 ../../Firmware/messages.c:64
#: ../../Firmware/ultralcd.cpp:932
msgid "M117 First layer cal."
msgstr "M117. Elso reteg kalibr."
#. MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
#: ../../Firmware/Marlin_main.cpp:884
msgid "MK3 firmware detected on MK3S printer"
msgstr "MK3 firmver telepitve MK3S nyomtatora"
#. MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
#: ../../Firmware/Marlin_main.cpp:877
msgid "MK3S firmware detected on MK3 printer"
msgstr "MK3S firmver eszlelve MK3 nyomtaton"
#. MSG_MMU_MODE c=8
#: ../../Firmware/messages.c:139 ../../Firmware/ultralcd.cpp:5241
#: ../../Firmware/ultralcd.cpp:5242
msgid "MMU Mode"
msgstr "MMU Mod"
#. MSG_MMU_OK_RESUMING_POSITION c=20 r=4
#: ../../Firmware/mmu.cpp:765
msgid "MMU OK. Resuming position..."
msgstr "MMU OK. Pozicio visszaallitasa..."
#. MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
#: ../../Firmware/mmu.cpp:758
msgid "MMU OK. Resuming temperature..."
msgstr "MMU OK. Homerseklet visszaallitasa..."
#. MSG_MMU_OK_RESUMING c=20 r=4
#: ../../Firmware/mmu.cpp:776
msgid "MMU OK. Resuming..."
msgstr "MMU OK. Folytatom..."
#. MSG_MMU_FAILS c=15
#: ../../Firmware/messages.c:71 ../../Firmware/ultralcd.cpp:1482
#: ../../Firmware/ultralcd.cpp:1505
msgid "MMU fails"
msgstr "MMU hibak"
#. MSG_MMU_LOAD_FAILED c=20
#: ../../Firmware/mmu.cpp:1587
msgid "MMU load failed"
msgstr "MMU betolt.hiba"
#. MSG_MMU_LOAD_FAILS c=15
#: ../../Firmware/messages.c:72 ../../Firmware/ultralcd.cpp:1483
#: ../../Firmware/ultralcd.cpp:1506
msgid "MMU load fails"
msgstr "MMU bet. hibak"
#. MSG_MMU_USER_ATTENTION c=20 r=3
#: ../../Firmware/mmu.cpp:722
msgid "MMU needs user attention."
msgstr "Az MMU felhasznaloi figyelmet igenyel."
#. MSG_MMU_POWER_FAILS c=15
#: ../../Firmware/ultralcd.cpp:1507
msgid "MMU power fails"
msgstr "MMU tap hibak"
#. MSG_MMU_CONNECTED c=18
#: ../../Firmware/ultralcd.cpp:1987
msgid "MMU2 connected"
msgstr "MMU2 csatlakozott"
#. MSG_MAGNETS_COMP c=13
#: ../../Firmware/messages.c:152 ../../Firmware/ultralcd.cpp:6903
msgid "Magnets comp."
msgstr "Magnes komp."
#. MSG_MAIN c=18
#: ../../Firmware/messages.c:65 ../../Firmware/ultralcd.cpp:1459
#: ../../Firmware/ultralcd.cpp:1607 ../../Firmware/ultralcd.cpp:1650
#: ../../Firmware/ultralcd.cpp:1952 ../../Firmware/ultralcd.cpp:2421
#: ../../Firmware/ultralcd.cpp:5655 ../../Firmware/ultralcd.cpp:5752
#: ../../Firmware/ultralcd.cpp:6150 ../../Firmware/ultralcd.cpp:6169
#: ../../Firmware/ultralcd.cpp:6195 ../../Firmware/ultralcd.cpp:6217
#: ../../Firmware/ultralcd.cpp:6243 ../../Firmware/ultralcd.cpp:6259
#: ../../Firmware/ultralcd.cpp:6786
msgid "Main"
msgstr "Fomenu"
#. MSG_MARK_FIL c=20 r=8
#: ../../Firmware/ultralcd.cpp:4557
msgid "Mark filament 100mm from extruder body. Click when done."
msgstr ""
#. MSG_MEASURED_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2875
msgid "Measured skew"
msgstr "Meroleg. hiba"
#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
#: ../../Firmware/Marlin_main.cpp:3494
#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.c:69
msgid "Measuring reference height of calibration point"
msgstr "Kalibracios pont magassaganak merese"
#. MSG_MESH c=12
#: ../../Firmware/messages.c:149 ../../Firmware/ultralcd.cpp:6899
msgid "Mesh"
msgstr "Halo"
#. MSG_MESH_BED_LEVELING c=18
#: ../../Firmware/messages.c:150 ../../Firmware/ultralcd.cpp:5683
#: ../../Firmware/ultralcd.cpp:5778
msgid "Mesh Bed Leveling"
msgstr "Asztal szintezes"
#. MSG_MODE c=6
#: ../../Firmware/messages.c:105 ../../Firmware/ultralcd.cpp:5196
#: ../../Firmware/ultralcd.cpp:5198 ../../Firmware/ultralcd.cpp:5218
#: ../../Firmware/ultralcd.cpp:5221 ../../Firmware/ultralcd.cpp:5224
#: ../../Firmware/ultralcd.cpp:5227 ../../Firmware/ultralcd.cpp:6831
#: ../../Firmware/ultralcd.cpp:6832 ../../Firmware/ultralcd.cpp:6844
#: ../../Firmware/ultralcd.cpp:6845 ../../Firmware/ultralcd.cpp:6846
#: ../../Firmware/ultralcd.cpp:6847 ../../Firmware/ultralcd.cpp:6931
msgid "Mode"
msgstr "Mod"
#: ../../Firmware/ultralcd.cpp:5288
msgid "Mode [Fast]"
msgstr ""
#: ../../Firmware/ultralcd.cpp:5291 ../../Firmware/ultralcd.cpp:5297
msgid "Mode [Optimal]"
msgstr ""
#: ../../Firmware/ultralcd.cpp:5294
msgid "Mode [Precise]"
msgstr ""
#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
#: ../../Firmware/ultralcd.cpp:4358
msgid "Mode change in progress..."
msgstr "Modvaltas folyamatban..."
#. MSG_MODEL c=8
#: ../../Firmware/messages.c:134 ../../Firmware/ultralcd.cpp:5435
#: ../../Firmware/ultralcd.cpp:5438 ../../Firmware/ultralcd.cpp:5441
#: ../../Firmware/ultralcd.cpp:5444
msgid "Model"
msgstr "Modell"
#. MSG_SELFTEST_MOTOR c=18
#: ../../Firmware/messages.c:98 ../../Firmware/ultralcd.cpp:8046
#: ../../Firmware/ultralcd.cpp:8055 ../../Firmware/ultralcd.cpp:8073
msgid "Motor"
msgstr ""
#. MSG_MOVE_X c=18
#: ../../Firmware/ultralcd.cpp:4225
msgid "Move X"
msgstr "X mozgatasa"
#. MSG_MOVE_Y c=18
#: ../../Firmware/ultralcd.cpp:4226
msgid "Move Y"
msgstr "Y mozgatasa"
#. MSG_MOVE_Z c=18
#: ../../Firmware/ultralcd.cpp:4227
msgid "Move Z"
msgstr "Z mozgatasa"
#. MSG_MOVE_AXIS c=18
#: ../../Firmware/ultralcd.cpp:5661
msgid "Move axis"
msgstr "Tengely mozgatasa"
#. MSG_NA c=3
#: ../../Firmware/menu.cpp:198 ../../Firmware/messages.c:129
#: ../../Firmware/ultralcd.cpp:2840 ../../Firmware/ultralcd.cpp:2885
#: ../../Firmware/ultralcd.cpp:3813 ../../Firmware/ultralcd.cpp:5088
#: ../../Firmware/ultralcd.cpp:5136 ../../Firmware/ultralcd.cpp:6806
#: ../../Firmware/ultralcd.cpp:6903
msgid "N/A"
msgstr ""
#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
#: ../../Firmware/util.cpp:195
msgid "New firmware version available:"
msgstr "Uj firmver verzio erheto el:"
#. MSG_NO c=4
#: ../../Firmware/messages.c:73 ../../Firmware/ultralcd.cpp:3156
#: ../../Firmware/ultralcd.cpp:3547 ../../Firmware/ultralcd.cpp:3642
#: ../../Firmware/ultralcd.cpp:3647 ../../Firmware/ultralcd.cpp:5645
#: ../../Firmware/ultralcd.cpp:7047
msgid "No"
msgstr "Nem"
#. MSG_NO_CARD c=18
#: ../../Firmware/ultralcd.cpp:6602
msgid "No SD card"
msgstr "Nincs SD kartya"
#. MSG_NO_MOVE c=20
#: ../../Firmware/Marlin_main.cpp:5815
msgid "No move."
msgstr "Nincs mozgas."
#. MSG_ERR_NO_THERMISTORS
#: ../../Firmware/Marlin_main.cpp:2655
msgid "No thermistors - no temperature"
msgstr ""
#. MSG_NONE c=8
#: ../../Firmware/messages.c:131 ../../Firmware/ultralcd.cpp:5265
#: ../../Firmware/ultralcd.cpp:5353 ../../Firmware/ultralcd.cpp:5362
#: ../../Firmware/ultralcd.cpp:5435 ../../Firmware/ultralcd.cpp:5444
#: ../../Firmware/ultralcd.cpp:5474 ../../Firmware/ultralcd.cpp:5483
#: ../../Firmware/ultralcd.cpp:5515 ../../Firmware/ultralcd.cpp:5524
msgid "None"
msgstr "Nincs"
#. MSG_NORMAL c=7
#: ../../Firmware/messages.c:109 ../../Firmware/ultralcd.cpp:5196
#: ../../Firmware/ultralcd.cpp:5241 ../../Firmware/ultralcd.cpp:5257
#: ../../Firmware/ultralcd.cpp:5276 ../../Firmware/ultralcd.cpp:6831
msgid "Normal"
msgstr ""
#. MSG_SELFTEST_NOTCONNECTED c=20
#: ../../Firmware/ultralcd.cpp:8033
msgid "Not connected"
msgstr "Nincs csatlakoztatva"
#. MSG_SELFTEST_FAN_NO c=19
#: ../../Firmware/messages.c:94 ../../Firmware/ultralcd.cpp:8232
#: ../../Firmware/ultralcd.cpp:8247 ../../Firmware/ultralcd.cpp:8255
msgid "Not spinning"
msgstr "Nem forog"
#. MSG_WIZARD_V2_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:4822
msgid ""
"Now I will calibrate distance between tip of the nozzle and heatbed surface."
msgstr ""
"Most beallitjuk a fuvoka hegye es a targyasztal felulete kozotti tavolsagot."
#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
#: ../../Firmware/ultralcd.cpp:4951
msgid "Now I will preheat nozzle for PLA."
msgstr "Felfutom a fuvokat PLA-hoz."
#. MSG_REMOVE_TEST_PRINT c=20 r=4
#: ../../Firmware/ultralcd.cpp:4942
msgid "Now remove the test print from steel sheet."
msgstr "Vedd le a tesztnyomatot az acellaprol."
#. MSG_NOZZLE c=10
#: ../../Firmware/messages.c:74 ../../Firmware/ultralcd.cpp:1714
#: ../../Firmware/ultralcd.cpp:5353 ../../Firmware/ultralcd.cpp:5356
#: ../../Firmware/ultralcd.cpp:5359 ../../Firmware/ultralcd.cpp:5362
#: ../../Firmware/ultralcd.cpp:6789 ../../Firmware/ultralcd.cpp:6949
msgid "Nozzle"
msgstr "Fuvoka"
#. MSG_NOZZLE_DIAMETER c=10
#: ../../Firmware/messages.c:138 ../../Firmware/ultralcd.cpp:5406
msgid "Nozzle d."
msgstr "Fuv. atm."
#. MSG_NOZZLE1
#: ../../Firmware/ultralcd.cpp:6952
msgid "Nozzle2"
msgstr ""
#. MSG_NOZZLE2
#: ../../Firmware/ultralcd.cpp:6955
msgid "Nozzle3"
msgstr ""
#. MSG_OFF c=3
#: ../../Firmware/menu.cpp:469 ../../Firmware/messages.c:127
#: ../../Firmware/ultralcd.cpp:5094 ../../Firmware/ultralcd.cpp:5110
#: ../../Firmware/ultralcd.cpp:5144 ../../Firmware/ultralcd.cpp:5173
#: ../../Firmware/ultralcd.cpp:5202 ../../Firmware/ultralcd.cpp:5671
#: ../../Firmware/ultralcd.cpp:5690 ../../Firmware/ultralcd.cpp:5694
#: ../../Firmware/ultralcd.cpp:6711 ../../Firmware/ultralcd.cpp:6810
#: ../../Firmware/ultralcd.cpp:6825 ../../Firmware/ultralcd.cpp:6837
#: ../../Firmware/ultralcd.cpp:6903 ../../Firmware/ultralcd.cpp:8974
#: ../../Firmware/ultralcd.cpp:8978
msgid "Off"
msgstr "Ki"
#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
#: ../../Firmware/Marlin_main.cpp:1562
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr "Regi beallitasokat talaltam. Az alap PID, Esteps, stb. lesz beallitva."
#. MSG_ON c=3
#: ../../Firmware/messages.c:128 ../../Firmware/ultralcd.cpp:5104
#: ../../Firmware/ultralcd.cpp:5108 ../../Firmware/ultralcd.cpp:5140
#: ../../Firmware/ultralcd.cpp:5163 ../../Firmware/ultralcd.cpp:5201
#: ../../Firmware/ultralcd.cpp:5671 ../../Firmware/ultralcd.cpp:5690
#: ../../Firmware/ultralcd.cpp:5694 ../../Firmware/ultralcd.cpp:6814
#: ../../Firmware/ultralcd.cpp:6825 ../../Firmware/ultralcd.cpp:6836
#: ../../Firmware/ultralcd.cpp:6903 ../../Firmware/ultralcd.cpp:8974
#: ../../Firmware/ultralcd.cpp:8978
msgid "On"
msgstr "Be"
#. MSG_SOUND_ONCE c=7
#: ../../Firmware/messages.c:147 ../../Firmware/ultralcd.cpp:5313
msgid "Once"
msgstr "Egyszer"
#. MSG_PID_RUNNING c=20
#: ../../Firmware/ultralcd.cpp:1322
msgid "PID cal."
msgstr "PID kalibracio"
#. MSG_PID_FINISHED c=20
#: ../../Firmware/ultralcd.cpp:1328
msgid "PID cal. finished"
msgstr "PID kal. kesz"
#. MSG_PID_EXTRUDER c=17
#: ../../Firmware/ultralcd.cpp:5783
msgid "PID calibration"
msgstr "PID kalibracio"
#. MSG_PINDA c=5
#: ../../Firmware/messages.c:174 ../../Firmware/ultralcd.cpp:1720
#: ../../Firmware/ultralcd.cpp:3841
msgid "PINDA"
msgstr ""
#. MSG_PINDA_PREHEAT c=20
#: ../../Firmware/ultralcd.cpp:678
msgid "PINDA Heating"
msgstr "PINDA Futes"
#. MSG_PINDA_CALIBRATION c=13
#: ../../Firmware/Marlin_main.cpp:5362 ../../Firmware/Marlin_main.cpp:5463
#: ../../Firmware/messages.c:114 ../../Firmware/ultralcd.cpp:675
#: ../../Firmware/ultralcd.cpp:5690 ../../Firmware/ultralcd.cpp:5796
msgid "PINDA cal."
msgstr "PINDA kal."
#. MSG_PINDA_CAL_FAILED c=20 r=4
#: ../../Firmware/ultralcd.cpp:3763
msgid "PINDA calibration failed"
msgstr "PINDA kalibracio sikertelen."
#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
#: ../../Firmware/Marlin_main.cpp:5540 ../../Firmware/messages.c:115
#: ../../Firmware/ultralcd.cpp:3757
msgid ""
"PINDA calibration is finished and active. It can be disabled in menu "
"Settings->PINDA cal."
msgstr "PINDA kalibracio sikeres es aktiv. A Beallitasok ->PINDA kal."
#. MSG_PAUSE c=5
#: ../../Firmware/messages.c:155 ../../Firmware/ultralcd.cpp:5567
msgid "Pause"
msgstr "Szun."
#. MSG_PAUSE_PRINT c=18
#: ../../Firmware/messages.c:76 ../../Firmware/ultralcd.cpp:6565
#: ../../Firmware/ultralcd.cpp:6567
msgid "Pause print"
msgstr "Nyomtatas szunet"
#. MSG_PICK_Z
#: ../../Firmware/ultralcd.cpp:4131
msgid "Pick print"
msgstr ""
#. MSG_PAPER c=20 r=10
#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/messages.c:75
msgid ""
"Place a sheet of paper under the nozzle during the calibration of first 4 "
"points. If the nozzle catches the paper, power off the printer immediately."
msgstr ""
"Az elso 4 pont kalibracioja alatt tegyel egy papirlapot a fuvoka ala. Ha a "
"fuvoka hozzaer a papirlaphoz, azonnal kapcsold ki a nyomtatot."
#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
#: ../../Firmware/messages.c:119 ../../Firmware/ultralcd.cpp:5036
msgid ""
"Please check our handbook and fix the problem. Then resume the Wizard by "
"rebooting the printer."
msgstr ""
"Kerlek nezz bele a kezikonyvbe es tavolitsd el a problemat. Utana "
"folytathatod az uzembe helyezest a nyomtato ujrainditasaval."
#. MSG_CHECK_IR_CONNECTION c=20 r=4
#: ../../Firmware/ultralcd.cpp:7312
msgid "Please check the IR sensor connection, unload filament if present."
msgstr "Nezd meg az IR szenzor csatlakoz., vedd ki a filam., ha bent van."
#. MSG_SELFTEST_PLEASECHECK c=20
#: ../../Firmware/ultralcd.cpp:8027
msgid "Please check:"
msgstr "Kerlek ellenorizd:"
#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
#: ../../Firmware/ultralcd.cpp:5008
msgid "Please clean heatbed and then press the knob."
msgstr "Kerlek, tisztisd le a targyasztalt, majd nyomd meg a gombot."
#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
#: ../../Firmware/Marlin_main.cpp:3492 ../../Firmware/messages.c:26
msgid "Please clean the nozzle for calibration. Click when done."
msgstr ""
"Kerlek, tisztisd meg a fuvokat kalibracio elott. Nyomd meg a gombot, ha "
"keszen vagy."
#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
#: ../../Firmware/ultralcd.cpp:4802
msgid ""
"Please insert filament into the extruder, then press the knob to load it."
msgstr ""
"Kerlek helyezd be a filament veget az extruderbe, majd nyomd meg a gombot a "
"betolteshez."
#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
#: ../../Firmware/ultralcd.cpp:4797
msgid ""
"Please insert filament into the first tube of the MMU, then press the knob "
"to load it."
msgstr ""
"Kerlek helyezd be a filamentet az MMU elso csovebe, majd nyomd meg a gombot "
"a betolteshez."
#. MSG_PLEASE_LOAD_PLA c=20 r=4
#: ../../Firmware/ultralcd.cpp:4719
msgid "Please load filament first."
msgstr "Kerlek eloszor toltsd be a filamentet."
#. MSG_CHECK_IDLER c=20 r=5
#: ../../Firmware/Marlin_main.cpp:3756
msgid "Please open idler and remove filament manually."
msgstr ""
"Kerlek, nyisd ki a nyomogorgo ajtajat, es tavolitsd el a filamentet kezzel."
#. MSG_PLACE_STEEL_SHEET c=20 r=5
#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.c:77
#: ../../Firmware/ultralcd.cpp:4945
msgid "Please place steel sheet on heatbed."
msgstr "Kerlek, helyzed az acellapot a targyasztalra."
#. MSG_PRESS_TO_UNLOAD c=20 r=4
#: ../../Firmware/Marlin_main.cpp:11984 ../../Firmware/Marlin_main.cpp:12037
#: ../../Firmware/messages.c:81
msgid "Please press the knob to unload filament"
msgstr "Kerlek, nyomd meg a gombot a filament kiadasahoz"
#. MSG_PULL_OUT_FILAMENT c=20 r=4
#: ../../Firmware/messages.c:83 ../../Firmware/ultralcd.cpp:6290
msgid "Please pull out filament immediately"
msgstr "Kerlek, huzd ki a filamentet most"
#. MSG_EJECT_REMOVE c=20 r=4
#: ../../Firmware/mmu.cpp:1421
msgid "Please remove filament and then press the knob."
msgstr "Kerlek, tavolitsd el a filamentet, majd nyomd meg a gombot."
#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
#: ../../Firmware/ultralcd.cpp:4941
msgid "Please remove shipping helpers first."
msgstr "Tavolitsd el a szallitasi segedanyagokat."
#. MSG_REMOVE_STEEL_SHEET c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3514 ../../Firmware/Marlin_main.cpp:5325
#: ../../Firmware/messages.c:86
msgid "Please remove steel sheet from heatbed."
msgstr "Kerlek, tavolisd el az acellapot az asztalrol."
#. MSG_RUN_XYZ c=20 r=4
#: ../../Firmware/Marlin_main.cpp:5301
msgid "Please run XYZ calibration first."
msgstr "Kerlek, elobb futtasd le az XYZ kalibraciot."
#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
#: ../../Firmware/ultralcd.cpp:7309
msgid "Please unload the filament first, then repeat this action."
msgstr "Kerlek eloszor vedd ki a filamentet, majd probalkozz ujra."
#. MSG_UPDATE_MMU2_FW c=20 r=4
#: ../../Firmware/mmu.cpp:1341
msgid "Please update firmware in your MMU2. Waiting for reset."
msgstr "Kerlek, frissitsd az MMU2 firmverjet. Varom az ujrainditast."
#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
#: ../../Firmware/util.cpp:199
msgid "Please upgrade."
msgstr "Kerlek frissits."
#. MSG_PLEASE_WAIT c=20
#: ../../Firmware/Marlin_main.cpp:3752 ../../Firmware/Marlin_main.cpp:3768
#: ../../Firmware/Marlin_main.cpp:8276 ../../Firmware/messages.c:78
#: ../../Firmware/mmu.cpp:1040 ../../Firmware/mmu.cpp:1121
#: ../../Firmware/ultralcd.cpp:2507 ../../Firmware/ultralcd.cpp:2518
#: ../../Firmware/ultralcd.cpp:4561
msgid "Please wait"
msgstr "Kerlek varj"
#. MSG_POWER_FAILURES c=15
#: ../../Firmware/messages.c:79 ../../Firmware/ultralcd.cpp:1531
#: ../../Firmware/ultralcd.cpp:1572 ../../Firmware/ultralcd.cpp:1582
msgid "Power failures"
msgstr "Aramkimaradasok"
#. MSG_PREHEAT c=18
#: ../../Firmware/ultralcd.cpp:6560
msgid "Preheat"
msgstr "Elofutes"
#. MSG_PREHEAT_NOZZLE c=20
#: ../../Firmware/messages.c:80 ../../Firmware/ultralcd.cpp:2617
msgid "Preheat the nozzle!"
msgstr "Futsd fel a fuvokat!"
#. MSG_WIZARD_HEATING c=20 r=3
#: ../../Firmware/messages.c:121 ../../Firmware/ultralcd.cpp:3256
#: ../../Firmware/ultralcd.cpp:4780 ../../Firmware/ultralcd.cpp:4783
msgid "Preheating nozzle. Please wait."
msgstr "Fuvoka futese folyamatban. Kerlek, varj."
#. MSG_PREHEATING_TO_CUT c=20
#: ../../Firmware/ultralcd.cpp:2299
msgid "Preheating to cut"
msgstr "Melegites vagashoz"
#. MSG_PREHEATING_TO_EJECT c=20
#: ../../Firmware/ultralcd.cpp:2296
msgid "Preheating to eject"
msgstr "Melegites kiadashoz"
#. MSG_PREHEATING_TO_LOAD c=20
#: ../../Firmware/ultralcd.cpp:2287
msgid "Preheating to load"
msgstr "Felfutes betolteshez"
#. MSG_PREHEATING_TO_UNLOAD c=20
#: ../../Firmware/ultralcd.cpp:2292
msgid "Preheating to unload"
msgstr "Felfutes kiadashoz"
#. MSG_PREPARE_FILAMENT c=20
#: ../../Firmware/ultralcd.cpp:2470
msgid "Prepare new filament"
msgstr ""
#. MSG_PRESS_KNOB c=20
#: ../../Firmware/ultralcd.cpp:2120
msgid "Press the knob"
msgstr "Nyomd meg a gombot"
#. MSG_PRESS_TO_PREHEAT c=20 r=4
#: ../../Firmware/Marlin_main.cpp:12015
msgid "Press the knob to preheat nozzle and continue."
msgstr "Nyomd meg a gombot a folytatashoz es a fuvoka felfutesehez."
#. MSG_RESUME_NOZZLE_TEMP c=20 r=4
#: ../../Firmware/mmu.cpp:726
msgid "Press the knob to resume nozzle temperature."
msgstr "Nyomd meg a gombot a fuvoka ismetelt felfutesehez."
#. MSG_PRINT_ABORTED c=20
#: ../../Firmware/messages.c:82 ../../Firmware/ultralcd.cpp:7006
msgid "Print aborted"
msgstr "Nyomt. megszakitva"
#. MSG_PRINT_FAN_SPEED c=16
#: ../../Firmware/messages.c:38 ../../Firmware/ultralcd.cpp:1438
#: ../../Firmware/ultralcd.cpp:8406
msgid "Print fan:"
msgstr "Targyhuto:"
#. MSG_CARD_MENU c=18
#: ../../Firmware/messages.c:22 ../../Firmware/ultralcd.cpp:6593
msgid "Print from SD"
msgstr "Nyomtatas SD-rol"
#. MSG_PRINT_PAUSED c=20
#: ../../Firmware/ultralcd.cpp:902
msgid "Print paused"
msgstr "Nyomt. szuneteltetve"
#. MSG_PRINT_TIME c=19
#: ../../Firmware/ultralcd.cpp:2704
msgid "Print time"
msgstr "Nyomtatasi ido"
#. MSG_PRINTER_IP c=18
#: ../../Firmware/ultralcd.cpp:2018
msgid "Printer IP Addr:"
msgstr "Nyomtato IP cime:"
#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
#: ../../Firmware/Marlin_main.cpp:1575 ../../Firmware/messages.c:48
msgid ""
"Printer has not been calibrated yet. Please follow the manual, chapter First "
"steps, section Calibration flow."
msgstr ""
"A nyomtato meg nem volt bekalibralva. Kerlek, kovesd az utmutato Elso "
"lepesek fejezetenek Kalibracio menete bekezdeset."
#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
#: ../../Firmware/util.cpp:295
msgid "Printer nozzle diameter differs from the G-code. Continue?"
msgstr "A nyomtato fuvoka atmeroje elter a G-kodtol. Folytasasm?"
#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
#: ../../Firmware/util.cpp:301
msgid ""
"Printer nozzle diameter differs from the G-code. Please check the value in "
"settings. Print cancelled."
msgstr ""
"A nyomtato fuvoka atmeroje elter a G-kodtol. Ellenorizd az erteket a "
"beallitasokban. Nyomtatas megallitva."
#. MSG_RPI_PORT c=13
#: ../../Firmware/messages.c:144 ../../Firmware/ultralcd.cpp:5694
msgid "RPi port"
msgstr ""
#. MSG_BED_CORRECTION_REAR c=14
#: ../../Firmware/ultralcd.cpp:3107
msgid "Rear side [μm]"
msgstr "Hatso old.[μm]"
#. MSG_RECOVERING_PRINT c=20
#: ../../Firmware/Marlin_main.cpp:11359
msgid "Recovering print"
msgstr "Nyomt. visszaallit"
#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
#: ../../Firmware/mmu.cpp:833
msgid "Remove old filament and press the knob to start loading new filament."
msgstr ""
"Vedd ki a regi filamentet, majd nyomd meg a gombot az uj filament "
"betoltesehez."
#. MSG_RENAME c=18
#: ../../Firmware/ultralcd.cpp:6484
msgid "Rename"
msgstr "Atnevezes"
#. MSG_RESET c=14
#: ../../Firmware/messages.c:87 ../../Firmware/ultralcd.cpp:3108
#: ../../Firmware/ultralcd.cpp:6485
msgid "Reset"
msgstr "Ujrainditas"
#. MSG_CALIBRATE_BED_RESET c=18
#: ../../Firmware/ultralcd.cpp:5788
msgid "Reset XYZ calibr."
msgstr "XYZ kal. nullazas"
#. MSG_RESUME_PRINT c=18
#: ../../Firmware/messages.c:88 ../../Firmware/ultralcd.cpp:6577
#: ../../Firmware/ultralcd.cpp:6579
msgid "Resume print"
msgstr "Nyomt. folytatasa"
#. MSG_RESUMING_PRINT c=20
#: ../../Firmware/messages.c:89 ../../Firmware/ultralcd.cpp:686
msgid "Resuming print"
msgstr "Nyomtatas folytatasa"
#. MSG_RIGHT c=10
#: ../../Firmware/ultralcd.cpp:2835
msgid "Right"
msgstr "Jobb"
#. MSG_BED_CORRECTION_RIGHT c=14
#: ../../Firmware/ultralcd.cpp:3105
msgid "Right side[μm]"
msgstr "Jobb old.[μm]"
#. MSG_E_CAL_KNOB c=20 r=8
#: ../../Firmware/ultralcd.cpp:4552
msgid "Rotate knob until mark reaches extruder body. Click when done."
msgstr ""
#. MSG_WIZARD_RERUN c=20 r=7
#: ../../Firmware/ultralcd.cpp:4740
msgid ""
"Running Wizard will delete current calibration results and start from the "
"beginning. Continue?"
msgstr ""
"A Varazslo futtatasa nullazza a jelenlegi kalibracios ertekeket es elolrol "
"fog mindent kezdeni. Folytatod?"
#. MSG_RUNOUTS c=7
#: ../../Firmware/ultralcd.cpp:1583
msgid "Runouts"
msgstr "Kifutas"
#. MSG_SD_CARD c=8
#: ../../Firmware/messages.c:140 ../../Firmware/ultralcd.cpp:5255
#: ../../Firmware/ultralcd.cpp:5257 ../../Firmware/ultralcd.cpp:5274
#: ../../Firmware/ultralcd.cpp:5276
msgid "SD card"
msgstr "SDkartya"
#. MSG_STOPPED c=20
#: ../../Firmware/Marlin_main.cpp:10175 ../../Firmware/cmdqueue.cpp:495
#: ../../Firmware/messages.c:113
msgid "STOPPED."
msgstr "MEGALLITVA."
#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
#: ../../Firmware/Marlin_main.cpp:3498 ../../Firmware/Marlin_main.cpp:3518
#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.c:46
msgid "Searching bed calibration point"
msgstr "Kalibracios pont keresese az asztalon"
#. MSG_SELECT c=18
#: ../../Firmware/ultralcd.cpp:6477
msgid "Select"
msgstr "Kivalasztas"
#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
#: ../../Firmware/ultralcd.cpp:4826
msgid ""
"Select a filament for the First Layer Calibration and select it in the on-"
"screen menu."
msgstr "Valassz egy filamentet az elso reteg kalibraciojahoz a menubol."
#. MSG_SELECT_EXTRUDER c=20
#: ../../Firmware/Marlin_main.cpp:8967 ../../Firmware/messages.c:56
msgid "Select extruder:"
msgstr "Extruder valasztas:"
#. MSG_SELECT_FILAMENT c=20
#: ../../Firmware/Marlin_main.cpp:8936 ../../Firmware/Marlin_main.cpp:8963
#: ../../Firmware/messages.c:57 ../../Firmware/ultralcd.cpp:4690
msgid "Select filament:"
msgstr "Valassz filamentet:"
#. MSG_LANGUAGE_SELECT c=18
#: ../../Firmware/ultralcd.cpp:4443 ../../Firmware/ultralcd.cpp:5701
msgid "Select language"
msgstr "Valassz nyelvet"
#. MSG_SEL_PREHEAT_TEMP c=20 r=6
#: ../../Firmware/ultralcd.cpp:4982
msgid "Select nozzle preheat temperature which matches your material."
msgstr ""
"Valaszd ki a fuvoka homersekletet, amelyik megfelel az altalad hasznalt "
"anyaghoz ajanlott homersekletnek."
#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
#: ../../Firmware/ultralcd.cpp:4831
msgid "Select temperature which matches your material."
msgstr "Valassz homersekletet, ami megfelel a filamenthez."
#. MSG_SELFTEST_OK c=20
#: ../../Firmware/ultralcd.cpp:7584
msgid "Self test OK"
msgstr "Ondiagnosztika OK"
#. MSG_SELFTEST_START c=20
#: ../../Firmware/ultralcd.cpp:7352
msgid "Self test start"
msgstr "Ondiagnosztika indul"
#. MSG_SELFTEST c=18
#: ../../Firmware/ultralcd.cpp:5764
msgid "Selftest"
msgstr "Ondiagnosztika"
#. MSG_SELFTEST_ERROR c=20
#: ../../Firmware/ultralcd.cpp:8026
msgid "Selftest error!"
msgstr "Ondiagnosztika hiba!"
#. MSG_SELFTEST_FAILED c=20
#: ../../Firmware/messages.c:92 ../../Firmware/ultralcd.cpp:7588
#: ../../Firmware/ultralcd.cpp:8113 ../../Firmware/ultralcd.cpp:8396
msgid "Selftest failed"
msgstr "Ondiag. sikertelen"
#. MSG_FORCE_SELFTEST c=20 r=8
#: ../../Firmware/Marlin_main.cpp:1594
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr ""
"A pontos szenzor nelkuli homing erdekeben lefuttatom az ondiagnosztikat."
#. MSG_INFO_SENSORS c=18
#: ../../Firmware/ultralcd.cpp:2031
msgid "Sensor info"
msgstr "Szenzor info"
#. MSG_FS_VERIFIED c=20 r=3
#: ../../Firmware/ultralcd.cpp:7316
msgid "Sensor verified, remove the filament now."
msgstr "Szenzor OK, vedd ki a filamentet most."
#. MSG_SET_TEMPERATURE c=20
#: ../../Firmware/ultralcd.cpp:3125
msgid "Set temperature:"
msgstr "Homerseklet beall.:"
#. MSG_SETTINGS c=18
#: ../../Firmware/messages.c:101 ../../Firmware/ultralcd.cpp:4224
#: ../../Firmware/ultralcd.cpp:4460 ../../Firmware/ultralcd.cpp:5066
#: ../../Firmware/ultralcd.cpp:6647 ../../Firmware/ultralcd.cpp:6894
#: ../../Firmware/ultralcd.cpp:6947
msgid "Settings"
msgstr "Beallitasok"
#. MSG_SEVERE_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2878
msgid "Severe skew"
msgstr "NagyMerol.hiba"
#. MSG_SHEET c=10
#: ../../Firmware/menu.cpp:211 ../../Firmware/menu.cpp:223
#: ../../Firmware/messages.c:67
msgid "Sheet"
msgstr "Acellap"
#. MSG_SHEET_OFFSET c=20 r=4
#: ../../Firmware/ultralcd.cpp:4680
msgid ""
"Sheet %.7s\n"
"Z offset: %+1.3fmm\n"
"%cContinue\n"
"%cReset"
msgstr ""
"Acellap %.7s\n"
"Z offset: %+1.3fmm\n"
"%cFolytassam\n"
"%cUjrainditas"
#. MSG_SHOW_END_STOPS c=18
#: ../../Firmware/ultralcd.cpp:5785
msgid "Show end stops"
msgstr "Vegallaskapcsolok"
#. MSG_SILENT c=7
#: ../../Firmware/messages.c:108 ../../Firmware/ultralcd.cpp:5221
#: ../../Firmware/ultralcd.cpp:5316 ../../Firmware/ultralcd.cpp:6845
msgid "Silent"
msgstr "Halk"
#. MSG_SLIGHT_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2877
msgid "Slight skew"
msgstr "Kis merol.hiba"
#. MSG_FILE_CNT c=20 r=6
#: ../../Firmware/cardreader.cpp:817
msgid ""
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
"100."
msgstr ""
"Nehany fajl nem lesz rendezve. Legfeljebb 100 fajlt lehet rendezni egy "
"konyvtaron belul."
#. MSG_ZLEVELING_ENFORCED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3260
msgid "Some problem encountered, Z-leveling enforced ..."
msgstr "Hiba tortent, Z szintezes indul..."
#. MSG_SORT c=7
#: ../../Firmware/messages.c:141 ../../Firmware/ultralcd.cpp:5263
#: ../../Firmware/ultralcd.cpp:5264 ../../Firmware/ultralcd.cpp:5265
msgid "Sort"
msgstr "Rendez"
#. MSG_SORTING_FILES c=20
#: ../../Firmware/cardreader.cpp:882 ../../Firmware/cardreader.cpp:942
msgid "Sorting files"
msgstr "Fajlok rendezese"
#. MSG_SORTING_FOLDERS c=20
#: ../../Firmware/cardreader.cpp:883
msgid "Sorting folders"
msgstr ""
#. MSG_SOUND c=9
#: ../../Firmware/messages.c:145 ../../Firmware/ultralcd.cpp:5310
#: ../../Firmware/ultralcd.cpp:5313 ../../Firmware/ultralcd.cpp:5316
#: ../../Firmware/ultralcd.cpp:5319 ../../Firmware/ultralcd.cpp:5322
msgid "Sound"
msgstr "Hang"
#. MSG_SPEED c=15
#: ../../Firmware/ultralcd.cpp:6787
msgid "Speed"
msgstr "Sebesseg"
#. MSG_SELFTEST_FAN_YES c=19
#: ../../Firmware/messages.c:95 ../../Firmware/ultralcd.cpp:8230
#: ../../Firmware/ultralcd.cpp:8245 ../../Firmware/ultralcd.cpp:8253
msgid "Spinning"
msgstr "Forog"
#. MSG_AUTO_DEPLETE c=13
#: ../../Firmware/messages.c:171 ../../Firmware/ultralcd.cpp:5136
#: ../../Firmware/ultralcd.cpp:5140 ../../Firmware/ultralcd.cpp:5144
msgid "SpoolJoin"
msgstr ""
#. MSG_TEMP_CAL_WARNING c=20 r=4
#: ../../Firmware/Marlin_main.cpp:5314
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr "Stabil 21-26C homerseklet es egy merev allvany (asztal) szukseges."
#. MSG_STATISTICS c=18
#: ../../Firmware/ultralcd.cpp:6652
msgid "Statistics"
msgstr "Statisztika"
#. MSG_STEALTH c=7
#: ../../Firmware/messages.c:110 ../../Firmware/ultralcd.cpp:5198
#: ../../Firmware/ultralcd.cpp:5242 ../../Firmware/ultralcd.cpp:6832
msgid "Stealth"
msgstr "Halk"
#. MSG_STEEL_SHEETS c=18
#: ../../Firmware/messages.c:68 ../../Firmware/ultralcd.cpp:5623
#: ../../Firmware/ultralcd.cpp:6474
msgid "Steel sheets"
msgstr "Acellapok"
#. MSG_STOP_PRINT c=18
#: ../../Firmware/messages.c:112 ../../Firmware/ultralcd.cpp:6584
#: ../../Firmware/ultralcd.cpp:7046
msgid "Stop print"
msgstr "Nyomt. megallitasa"
#. MSG_STRICT c=8
#: ../../Firmware/messages.c:133 ../../Firmware/ultralcd.cpp:5359
#: ../../Firmware/ultralcd.cpp:5441 ../../Firmware/ultralcd.cpp:5480
#: ../../Firmware/ultralcd.cpp:5521
msgid "Strict"
msgstr "Szigoru"
#. MSG_SUPPORT c=18
#: ../../Firmware/ultralcd.cpp:6661
msgid "Support"
msgstr "Tamogatas"
#. MSG_SELFTEST_SWAPPED c=16
#: ../../Firmware/ultralcd.cpp:8085
msgid "Swapped"
msgstr "Felcserelve"
#. MSG_TEMPERATURE c=18
#: ../../Firmware/ultralcd.cpp:5657
msgid "Temperature"
msgstr "Homerseklet"
#. MSG_MENU_TEMPERATURES c=18
#: ../../Firmware/ultralcd.cpp:2037
msgid "Temperatures"
msgstr "Homersekletek"
#. MSG_WIZARD_V2_CAL_2 c=20 r=12
#: ../../Firmware/ultralcd.cpp:4834
msgid ""
"The printer will start printing a zig-zag line. Rotate the knob until you "
"reach the optimal height. Check the pictures in the handbook (Calibration "
"chapter)."
msgstr ""
"A nyomtato egy cikk-cakkos vonalat fog nyomtatni. Tekerd a gombot addig, "
"amig el nem ered az optimalis magassagot. Nezd meg a kepeket a kezikonyv "
"Kalibracio fejezeteben."
#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
#: ../../Firmware/Marlin_main.cpp:1588 ../../Firmware/messages.c:49
msgid ""
"There is still a need to make Z calibration. Please follow the manual, "
"chapter First steps, section Calibration flow."
msgstr ""
"Meg mindig szukseges a Z kalibracio. Kerlek, kovesd az utmutato Elso lepesek "
"fejezetenek Kalibracio menete bekezdeset."
#. MSG_SORT_TIME c=8
#: ../../Firmware/messages.c:142 ../../Firmware/ultralcd.cpp:5263
msgid "Time"
msgstr "Ido"
#. MSG_TIMEOUT c=12
#: ../../Firmware/messages.c:159 ../../Firmware/ultralcd.cpp:6932
msgid "Timeout"
msgstr "Idotullepes"
#. MSG_TOTAL c=6
#: ../../Firmware/messages.c:102 ../../Firmware/ultralcd.cpp:1461
#: ../../Firmware/ultralcd.cpp:1609
msgid "Total"
msgstr "Ossz."
#. MSG_TOTAL_FAILURES c=20
#: ../../Firmware/messages.c:103 ../../Firmware/ultralcd.cpp:1504
#: ../../Firmware/ultralcd.cpp:1530 ../../Firmware/ultralcd.cpp:1640
msgid "Total failures"
msgstr "Ossz. hiba"
#. MSG_TOTAL_FILAMENT c=19
#: ../../Firmware/ultralcd.cpp:2725
msgid "Total filament"
msgstr "Osszes filament"
#. MSG_TOTAL_PRINT_TIME c=19
#: ../../Firmware/ultralcd.cpp:2726
msgid "Total print time"
msgstr "Ossz. nyomt. ido"
#. MSG_TUNE c=18
#: ../../Firmware/ultralcd.cpp:6558
msgid "Tune"
msgstr "Finomhangolas"
#. MSG_UNLOAD_ALL c=17
#: ../../Firmware/ultralcd.cpp:6244
msgid "Unload all"
msgstr ""
#. MSG_UNLOAD_FILAMENT c=18
#: ../../Firmware/messages.c:116 ../../Firmware/ultralcd.cpp:5910
#: ../../Firmware/ultralcd.cpp:6625 ../../Firmware/ultralcd.cpp:6632
#: ../../Firmware/ultralcd.cpp:6645
msgid "Unload filament"
msgstr "Filament kiadasa"
#. MSG_UNLOAD_FILAMENT_1 c=17
#: ../../Firmware/ultralcd.cpp:6245
msgid "Unload filament 1"
msgstr ""
#. MSG_UNLOAD_FILAMENT_2 c=17
#: ../../Firmware/ultralcd.cpp:6246
msgid "Unload filament 2"
msgstr ""
#. MSG_UNLOAD_FILAMENT_3 c=17
#: ../../Firmware/ultralcd.cpp:6247
msgid "Unload filament 3"
msgstr ""
#. MSG_UNLOAD_FILAMENT_4 c=17
#: ../../Firmware/ultralcd.cpp:6248
msgid "Unload filament 4"
msgstr ""
#. MSG_UNLOAD_FILAMENT_5 c=17
#: ../../Firmware/ultralcd.cpp:6251
msgid "Unload filament 5"
msgstr ""
#. MSG_UNLOADING_FILAMENT c=20
#: ../../Firmware/messages.c:117 ../../Firmware/mmu.cpp:1085
#: ../../Firmware/mmu.cpp:1118 ../../Firmware/ultralcd.cpp:6274
msgid "Unloading filament"
msgstr "Filament kiadasa"
#. MSG_USED c=19
#: ../../Firmware/ultralcd.cpp:5912
msgid "Used during print"
msgstr ""
#. MSG_FIL_FAILED c=20 r=5
#: ../../Firmware/ultralcd.cpp:7320
msgid "Verification failed, remove the filament and try again."
msgstr "Ellenorzes sikertelen, vedd ki a filamentet es probald ujra."
#. MSG_MENU_VOLTAGES c=18
#: ../../Firmware/ultralcd.cpp:2040
msgid "Voltages"
msgstr "Feszultsegek"
#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
#: ../../Firmware/ultralcd.cpp:4294
msgid ""
"WARNING:\n"
"Crash detection\n"
"disabled in\n"
"Stealth mode"
msgstr ""
"FIGYELEM:\n"
"Utkozes erzekeles\n"
"kikapcsolva\n"
"Halk modban"
#. MSG_USERWAIT c=20
#: ../../Firmware/Marlin_main.cpp:4311
msgid "Wait for user..."
msgstr "Var. a felhasznalora"
#. MSG_WAITING_TEMP_PINDA c=20 r=3
#: ../../Firmware/ultralcd.cpp:3234
msgid "Waiting for PINDA probe cooling"
msgstr "A PINDA szenzor kihuleset varom."
#. MSG_WAITING_TEMP c=20 r=4
#: ../../Firmware/ultralcd.cpp:3273
msgid "Waiting for nozzle and bed cooling"
msgstr "A fuvoka es az asztal kihuleset varom."
#. MSG_WARN c=8
#: ../../Firmware/messages.c:132 ../../Firmware/ultralcd.cpp:5356
#: ../../Firmware/ultralcd.cpp:5438 ../../Firmware/ultralcd.cpp:5477
#: ../../Firmware/ultralcd.cpp:5518
msgid "Warn"
msgstr "Figylem."
#. MSG_CHANGED_BOTH c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1554
msgid "Warning: both printer type and motherboard type changed."
msgstr "Figyelem: a nyomtato es az alaplap tipusa is megvaltozott."
#. MSG_CHANGED_MOTHERBOARD c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1546
msgid "Warning: motherboard type changed."
msgstr "Figyelem: az alaplap tipusa megvaltozott."
#. MSG_CHANGED_PRINTER c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1550
msgid "Warning: printer type changed."
msgstr "Figyelem: a nyomtato tipusa megvaltozott."
#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
#: ../../Firmware/Marlin_main.cpp:3747
msgid "Was filament unload successful?"
msgstr "Sikerult kivenni a filamentet?"
#. MSG_SELFTEST_WIRINGERROR c=18
#: ../../Firmware/messages.c:100 ../../Firmware/ultralcd.cpp:8037
#: ../../Firmware/ultralcd.cpp:8041 ../../Firmware/ultralcd.cpp:8061
#: ../../Firmware/ultralcd.cpp:8067 ../../Firmware/ultralcd.cpp:8091
msgid "Wiring error"
msgstr "Kabelezesi hiba"
#. MSG_WIZARD c=17
#: ../../Firmware/ultralcd.cpp:5755
msgid "Wizard"
msgstr "Varazslo"
#. MSG_X_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:5070
msgid "X-correct:"
msgstr "X-korrekcio:"
#. MSG_XFLASH
#: ../../Firmware/ultralcd.cpp:6663
msgid "XFLASH init"
msgstr ""
#. MSG_XYZ_DETAILS c=18
#: ../../Firmware/ultralcd.cpp:2029
msgid "XYZ cal. details"
msgstr "XYZ kal. reszlet"
#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
#: ../../Firmware/ultralcd.cpp:3735
msgid "XYZ calibration all right. Skew will be corrected automatically."
msgstr ""
"XYZ kalibracio OK. Az esetleges X/Y merolegessegi hiba automatikusan "
"korrigalva lesz."
#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
#: ../../Firmware/ultralcd.cpp:3732
msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
msgstr ""
"XYZ kalibracio sikerult. Az X/Y tengelyeken enyhe merolegessegi hiba van."
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3713
msgid "XYZ calibration compromised. Front calibration points not reachable."
msgstr ""
"Az XYZ kalibracio sikertelen. Az elulso kalibracios pontok nem erhetoek el."
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3719
msgid ""
"XYZ calibration compromised. Left front calibration point not reachable."
msgstr ""
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3716
msgid ""
"XYZ calibration compromised. Right front calibration point not reachable."
msgstr ""
"Az XYZ kalibracio sikertelen. A jobb kalibracios pontok nem erhetoek el."
#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
#: ../../Firmware/ultralcd.cpp:3695
msgid "XYZ calibration failed. Bed calibration point was not found."
msgstr ""
"Az XYZ kalibracio sikertelen. Az asztal kalibracios pontja nem erheto el."
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
#: ../../Firmware/ultralcd.cpp:3701
msgid "XYZ calibration failed. Front calibration points not reachable."
msgstr ""
"Az XYZ kalibracio sikertelen. Az elulso kalibracios pontok nem erhetoek el."
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3707
msgid "XYZ calibration failed. Left front calibration point not reachable."
msgstr ""
#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
#: ../../Firmware/messages.c:18 ../../Firmware/ultralcd.cpp:3698
#: ../../Firmware/ultralcd.cpp:3726
msgid "XYZ calibration failed. Please consult the manual."
msgstr "XYZ kalibracio sikertelen. Kerlek, nezz bele a kezikonyvbe."
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
#: ../../Firmware/ultralcd.cpp:3704
msgid "XYZ calibration failed. Right front calibration point not reachable."
msgstr ""
"Az XYZ kalibracio sikertelen. A jobb kalibracios pontok nem erhetoek el."
#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
#: ../../Firmware/ultralcd.cpp:3729
msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
msgstr "XYZ kalibracio OK. Az X/Y tengelyek merolegesek. Gratulalok!"
#. MSG_Y_DIST_FROM_MIN c=20
#: ../../Firmware/ultralcd.cpp:2832
msgid "Y distance from min"
msgstr "Y-minimum tavolsag"
#. MSG_Y_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:5071
msgid "Y-correct:"
msgstr "Y-korrekcio:"
#. MSG_YES c=4
#: ../../Firmware/messages.c:125 ../../Firmware/ultralcd.cpp:2553
#: ../../Firmware/ultralcd.cpp:3152 ../../Firmware/ultralcd.cpp:3547
#: ../../Firmware/ultralcd.cpp:3641 ../../Firmware/ultralcd.cpp:3645
#: ../../Firmware/ultralcd.cpp:5645 ../../Firmware/ultralcd.cpp:7048
msgid "Yes"
msgstr "Igen"
#. MSG_FW_VERSION_ALPHA c=20 r=8
#: ../../Firmware/Marlin_main.cpp:850
msgid ""
"You are using firmware alpha version. This is development version. Using "
"this version is not recommended and may cause printer damage."
msgstr ""
#. MSG_FW_VERSION_BETA c=20 r=8
#: ../../Firmware/Marlin_main.cpp:851
msgid ""
"You are using firmware beta version. This is development version. Using this "
"version is not recommended and may cause printer damage."
msgstr ""
#. MSG_WIZARD_QUIT c=20 r=8
#: ../../Firmware/messages.c:122 ../../Firmware/ultralcd.cpp:5047
msgid "You can always resume the Wizard from Calibration -> Wizard."
msgstr "A Varazsolt barmikor elered a Kalibracio -> Varazslo menubol."
#. MSG_Z_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:5072
msgid "Z-correct:"
msgstr "Z-korrekcio:"
#. MSG_Z_PROBE_NR c=14
#: ../../Firmware/messages.c:151 ../../Firmware/ultralcd.cpp:6902
msgid "Z-probe nr."
msgstr "Z meres szama"
#. MSG_MEASURED_OFFSET c=20
#: ../../Firmware/ultralcd.cpp:2903
msgid "[0;0] point offset"
msgstr "[0;0] pont offszet"
#. MSG_PRESS c=20 r=2
#: ../../Firmware/ultralcd.cpp:2475
msgid "and press the knob"
msgstr "es nyomd meg a gombot"
#: ../../Firmware/ultralcd.cpp:8620
msgid "monitoring or hold"
msgstr ""
#: ../../Firmware/ultralcd.cpp:8621
msgid "the knob to continue"
msgstr ""
#. MSG_TO_LOAD_FIL c=20
#: ../../Firmware/ultralcd.cpp:2127
msgid "to load filament"
msgstr "filam. betoltesehez"
#. MSG_TO_UNLOAD_FIL c=20
#: ../../Firmware/ultralcd.cpp:2131
msgid "to unload filament"
msgstr "filament kiadasahoz"
#. MSG_UNKNOWN c=13
#: ../../Firmware/ultralcd.cpp:1995
msgid "unknown"
msgstr "ismeretlen"
#. MSG_IR_UNKNOWN c=18
#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.c:167
msgid "unknown state"
msgstr "ismeretlen allapot"
#. MSG_REFRESH c=18
#: ../../Firmware/messages.c:85 ../../Firmware/ultralcd.cpp:7133
#: ../../Firmware/ultralcd.cpp:7136
msgid "🔃Refresh"
msgstr "🔃Frissites"
Reference in New Issue View Git Blame Copy Permalink