380 lines
12 KiB
C++
380 lines
12 KiB
C++
#include "Marlin.h"
|
|
|
|
#ifdef HAVE_TMC2130_DRIVERS
|
|
|
|
#include "tmc2130.h"
|
|
#include <SPI.h>
|
|
|
|
//externals for debuging
|
|
extern float current_position[4];
|
|
extern void st_get_position_xy(long &x, long &y);
|
|
|
|
//chipselect pins
|
|
uint8_t tmc2130_cs[4] = { X_TMC2130_CS, Y_TMC2130_CS, Z_TMC2130_CS, E0_TMC2130_CS };
|
|
//mode
|
|
uint8_t tmc2130_mode = TMC2130_MODE_NORMAL;
|
|
//holding currents
|
|
uint8_t tmc2130_current_h[4] = TMC2130_CURRENTS_H;
|
|
//running currents
|
|
uint8_t tmc2130_current_r[4] = TMC2130_CURRENTS_R;
|
|
//axis stalled flags
|
|
uint8_t tmc2130_axis_stalled[4] = {0, 0, 0, 0};
|
|
//last homing stalled
|
|
uint8_t tmc2130_LastHomingStalled = 0;
|
|
|
|
uint8_t sg_homing_axis = 0xff;
|
|
uint8_t sg_homing_delay = 0;
|
|
|
|
//TMC2130 registers
|
|
#define TMC2130_REG_GCONF 0x00 // 17 bits
|
|
#define TMC2130_REG_GSTAT 0x01 // 3 bits
|
|
#define TMC2130_REG_IOIN 0x04 // 8+8 bits
|
|
#define TMC2130_REG_IHOLD_IRUN 0x10 // 5+5+4 bits
|
|
#define TMC2130_REG_TPOWERDOWN 0x11 // 8 bits
|
|
#define TMC2130_REG_TSTEP 0x12 // 20 bits
|
|
#define TMC2130_REG_TPWMTHRS 0x13 // 20 bits
|
|
#define TMC2130_REG_TCOOLTHRS 0x14 // 20 bits
|
|
#define TMC2130_REG_THIGH 0x15 // 20 bits
|
|
#define TMC2130_REG_XDIRECT 0x2d // 32 bits
|
|
#define TMC2130_REG_VDCMIN 0x33 // 23 bits
|
|
#define TMC2130_REG_MSLUT0 0x60 // 32 bits
|
|
#define TMC2130_REG_MSLUT1 0x61 // 32 bits
|
|
#define TMC2130_REG_MSLUT2 0x62 // 32 bits
|
|
#define TMC2130_REG_MSLUT3 0x63 // 32 bits
|
|
#define TMC2130_REG_MSLUT4 0x64 // 32 bits
|
|
#define TMC2130_REG_MSLUT5 0x65 // 32 bits
|
|
#define TMC2130_REG_MSLUT6 0x66 // 32 bits
|
|
#define TMC2130_REG_MSLUT7 0x67 // 32 bits
|
|
#define TMC2130_REG_MSLUTSEL 0x68 // 32 bits
|
|
#define TMC2130_REG_MSLUTSTART 0x69 // 8+8 bits
|
|
#define TMC2130_REG_MSCNT 0x6a // 10 bits
|
|
#define TMC2130_REG_MSCURACT 0x6b // 9+9 bits
|
|
#define TMC2130_REG_CHOPCONF 0x6c // 32 bits
|
|
#define TMC2130_REG_COOLCONF 0x6d // 25 bits
|
|
#define TMC2130_REG_DCCTRL 0x6e // 24 bits
|
|
#define TMC2130_REG_DRV_STATUS 0x6f // 32 bits
|
|
#define TMC2130_REG_PWMCONF 0x70 // 22 bits
|
|
#define TMC2130_REG_PWM_SCALE 0x71 // 8 bits
|
|
#define TMC2130_REG_ENCM_CTRL 0x72 // 2 bits
|
|
#define TMC2130_REG_LOST_STEPS 0x73 // 20 bits
|
|
|
|
|
|
uint16_t tmc2130_rd_TSTEP(uint8_t cs);
|
|
uint16_t tmc2130_rd_DRV_STATUS(uint8_t chipselect);
|
|
|
|
void tmc2130_wr_CHOPCONF(uint8_t cs, bool extrapolate256 = 0, uint16_t microstep_resolution = 16);
|
|
void tmc2130_wr_PWMCONF(uint8_t cs, uint8_t PWMautoScale = TMC2130_PWM_AUTO, uint8_t PWMfreq = TMC2130_PWM_FREQ, uint8_t PWMgrad = TMC2130_PWM_GRAD, uint8_t PWMampl = TMC2130_PWM_AMPL);
|
|
void tmc2130_wr_TPWMTHRS(uint8_t cs, uint32_t val32);
|
|
void tmc2130_wr_THIGH(uint8_t cs, uint32_t val32);
|
|
|
|
uint8_t tmc2130_txrx(uint8_t cs, uint8_t addr, uint32_t wval, uint32_t* rval);
|
|
uint8_t tmc2130_wr(uint8_t cs, uint8_t addr, uint32_t wval);
|
|
uint8_t tmc2130_rd(uint8_t cs, uint8_t addr, uint32_t* rval);
|
|
|
|
|
|
|
|
void tmc2130_init()
|
|
{
|
|
MYSERIAL.print("tmc2130_init mode=");
|
|
MYSERIAL.println(tmc2130_mode, DEC);
|
|
WRITE(X_TMC2130_CS, HIGH);
|
|
WRITE(Y_TMC2130_CS, HIGH);
|
|
WRITE(Z_TMC2130_CS, HIGH);
|
|
WRITE(E0_TMC2130_CS, HIGH);
|
|
SET_OUTPUT(X_TMC2130_CS);
|
|
SET_OUTPUT(Y_TMC2130_CS);
|
|
SET_OUTPUT(Z_TMC2130_CS);
|
|
SET_OUTPUT(E0_TMC2130_CS);
|
|
SPI.begin();
|
|
for (int i = 0; i < 2; i++) // X Y axes
|
|
{
|
|
tmc2130_wr(tmc2130_cs[i], TMC2130_REG_GCONF, (tmc2130_mode == TMC2130_MODE_SILENT)?0x00000004:0x00000000);
|
|
tmc2130_wr(tmc2130_cs[i], TMC2130_REG_IHOLD_IRUN, 0x000f0000 | ((tmc2130_current_r[i] & 0x1f) << 8) | (tmc2130_current_h[i] & 0x1f));
|
|
tmc2130_wr(tmc2130_cs[i], TMC2130_REG_TPOWERDOWN, 0x00000000);
|
|
tmc2130_wr_PWMCONF(tmc2130_cs[i]); //PWM_CONF //reset default=0x00050480
|
|
tmc2130_wr_TPWMTHRS(tmc2130_cs[i], TMC2130_TPWMTHRS);
|
|
//tmc2130_wr_THIGH(tmc2130_cs[i], TMC2130_THIGH);
|
|
tmc2130_wr_CHOPCONF(tmc2130_cs[i], TMC2130_EXP256_XY, TMC2130_USTEPS_XY);
|
|
}
|
|
for (int i = 2; i < 3; i++) // Z axis
|
|
{
|
|
tmc2130_wr(tmc2130_cs[i], TMC2130_REG_GCONF, (tmc2130_mode == TMC2130_MODE_SILENT)?0x00000004:0x00000000);
|
|
tmc2130_wr(tmc2130_cs[i], TMC2130_REG_IHOLD_IRUN, 0x000f0000 | ((tmc2130_current_r[i] & 0x1f) << 8) | (tmc2130_current_h[i] & 0x1f));
|
|
tmc2130_wr(tmc2130_cs[i], TMC2130_REG_TPOWERDOWN, 0x00000000);
|
|
tmc2130_wr_PWMCONF(tmc2130_cs[i]); //PWM_CONF //reset default=0x00050480
|
|
tmc2130_wr_TPWMTHRS(tmc2130_cs[i], TMC2130_TPWMTHRS);
|
|
//tmc2130_wr_THIGH(tmc2130_cs[i], TMC2130_THIGH);
|
|
tmc2130_wr_CHOPCONF(tmc2130_cs[i], TMC2130_EXP256_Z, TMC2130_USTEPS_Z);
|
|
}
|
|
for (int i = 3; i < 4; i++) // E axis
|
|
{
|
|
tmc2130_wr(tmc2130_cs[i], TMC2130_REG_GCONF, 0x00000004); //GCONF - bit 2 activate stealthChop
|
|
tmc2130_wr(tmc2130_cs[i], TMC2130_REG_IHOLD_IRUN, 0x000f0000 | ((tmc2130_current_r[i] & 0x1f) << 8) | (tmc2130_current_h[i] & 0x1f));
|
|
tmc2130_wr(tmc2130_cs[i], TMC2130_REG_TPOWERDOWN, 0x00000000);
|
|
tmc2130_wr_CHOPCONF(tmc2130_cs[i], TMC2130_EXP256_E, TMC2130_USTEPS_E);
|
|
}
|
|
}
|
|
|
|
bool tmc2130_update_sg()
|
|
{
|
|
if ((sg_homing_axis == X_AXIS) || (sg_homing_axis == Y_AXIS))
|
|
{
|
|
uint8_t cs = tmc2130_cs[sg_homing_axis];
|
|
uint16_t tstep = tmc2130_rd_TSTEP(cs);
|
|
if (tstep < TMC2130_TCOOLTHRS)
|
|
{
|
|
if(sg_homing_delay < 10) // wait for a few tens microsteps until stallGuard is used //todo: read out microsteps directly, instead of delay counter
|
|
sg_homing_delay++;
|
|
else
|
|
{
|
|
uint16_t sg = tmc2130_rd_DRV_STATUS(cs) & 0x3ff;
|
|
if (sg==0)
|
|
{
|
|
tmc2130_axis_stalled[sg_homing_axis] = true;
|
|
tmc2130_LastHomingStalled = true;
|
|
}
|
|
else
|
|
tmc2130_axis_stalled[sg_homing_axis] = false;
|
|
}
|
|
}
|
|
else
|
|
tmc2130_axis_stalled[sg_homing_axis] = false;
|
|
return true;
|
|
}
|
|
else
|
|
{
|
|
tmc2130_axis_stalled[X_AXIS] = false;
|
|
tmc2130_axis_stalled[Y_AXIS] = false;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void tmc2130_check_overtemp()
|
|
{
|
|
const static char TMC_OVERTEMP_MSG[] PROGMEM = "TMC DRIVER OVERTEMP ";
|
|
uint8_t cs[4] = { X_TMC2130_CS, Y_TMC2130_CS, Z_TMC2130_CS, E0_TMC2130_CS };
|
|
static uint32_t checktime = 0;
|
|
//drivers_disabled[0] = 1; //TEST
|
|
if( millis() - checktime > 1000 )
|
|
{
|
|
for(int i=0;i<4;i++)
|
|
{
|
|
uint32_t drv_status = 0;
|
|
tmc2130_rd(cs[i], TMC2130_REG_DRV_STATUS, &drv_status);
|
|
if (drv_status & ((uint32_t)1<<26))
|
|
{ // BIT 26 - over temp prewarning ~120C (+-20C)
|
|
SERIAL_ERRORRPGM(TMC_OVERTEMP_MSG);
|
|
SERIAL_ECHOLN(i);
|
|
for(int i=0; i < 4; i++)
|
|
tmc2130_wr(tmc2130_cs[i], TMC2130_REG_CHOPCONF, 0x00010000);
|
|
kill(TMC_OVERTEMP_MSG);
|
|
}
|
|
}
|
|
checktime = millis();
|
|
}
|
|
}
|
|
|
|
void tmc2130_home_enter(uint8_t axis)
|
|
{
|
|
MYSERIAL.print("tmc2130_home_enter ");
|
|
MYSERIAL.println((int)axis);
|
|
uint8_t cs = tmc2130_cs[axis];
|
|
sg_homing_axis = axis;
|
|
sg_homing_delay = 0;
|
|
tmc2130_axis_stalled[X_AXIS] = false;
|
|
tmc2130_axis_stalled[Y_AXIS] = false;
|
|
//Configuration to spreadCycle
|
|
tmc2130_wr(cs, TMC2130_REG_GCONF, 0x00000000);
|
|
tmc2130_wr(cs, TMC2130_REG_COOLCONF, ((axis == X_AXIS)?TMC2130_SG_THRS_X:TMC2130_SG_THRS_Y) << 16);
|
|
tmc2130_wr(cs, TMC2130_REG_TCOOLTHRS, TMC2130_TCOOLTHRS);
|
|
}
|
|
|
|
void tmc2130_home_exit()
|
|
{
|
|
MYSERIAL.println("tmc2130_home_exit");
|
|
if ((sg_homing_axis == X_AXIS) || (sg_homing_axis == Y_AXIS))
|
|
{
|
|
if (tmc2130_mode == TMC2130_MODE_SILENT)
|
|
{
|
|
// Configuration back to stealthChop
|
|
tmc2130_wr(tmc2130_cs[sg_homing_axis], TMC2130_REG_GCONF, 0x00000004);
|
|
}
|
|
sg_homing_axis = 0xff;
|
|
}
|
|
}
|
|
|
|
extern uint8_t tmc2130_didLastHomingStall()
|
|
{
|
|
uint8_t ret = tmc2130_LastHomingStalled;
|
|
tmc2130_LastHomingStalled = false;
|
|
return ret;
|
|
}
|
|
|
|
void tmc2130_set_current_h(uint8_t axis, uint8_t current)
|
|
{
|
|
MYSERIAL.print("tmc2130_set_current_h ");
|
|
MYSERIAL.print((int)axis);
|
|
MYSERIAL.print(" ");
|
|
MYSERIAL.println((int)current);
|
|
if (current > 15) current = 15; //current>15 is unsafe
|
|
tmc2130_current_h[axis] = current;
|
|
tmc2130_wr(tmc2130_cs[axis], TMC2130_REG_IHOLD_IRUN, 0x000f0000 | ((tmc2130_current_r[axis] & 0x1f) << 8) | (tmc2130_current_h[axis] & 0x1f));
|
|
}
|
|
|
|
void tmc2130_set_current_r(uint8_t axis, uint8_t current)
|
|
{
|
|
MYSERIAL.print("tmc2130_set_current_r ");
|
|
MYSERIAL.print((int)axis);
|
|
MYSERIAL.print(" ");
|
|
MYSERIAL.println((int)current);
|
|
if (current > 15) current = 15; //current>15 is unsafe
|
|
tmc2130_current_r[axis] = current;
|
|
tmc2130_wr(tmc2130_cs[axis], TMC2130_REG_IHOLD_IRUN, 0x000f0000 | ((tmc2130_current_r[axis] & 0x1f) << 8) | (tmc2130_current_h[axis] & 0x1f));
|
|
}
|
|
|
|
void tmc2130_print_currents()
|
|
{
|
|
MYSERIAL.println("tmc2130_print_currents");
|
|
MYSERIAL.println("\tH\rR");
|
|
MYSERIAL.print("X\t");
|
|
MYSERIAL.print((int)tmc2130_current_h[0]);
|
|
MYSERIAL.print("\t");
|
|
MYSERIAL.println((int)tmc2130_current_r[0]);
|
|
MYSERIAL.print("Y\t");
|
|
MYSERIAL.print((int)tmc2130_current_h[1]);
|
|
MYSERIAL.print("\t");
|
|
MYSERIAL.println((int)tmc2130_current_r[1]);
|
|
MYSERIAL.print("Z\t");
|
|
MYSERIAL.print((int)tmc2130_current_h[2]);
|
|
MYSERIAL.print("\t");
|
|
MYSERIAL.println((int)tmc2130_current_r[2]);
|
|
MYSERIAL.print("E\t");
|
|
MYSERIAL.print((int)tmc2130_current_h[3]);
|
|
MYSERIAL.print("\t");
|
|
MYSERIAL.println((int)tmc2130_current_r[3]);
|
|
}
|
|
|
|
uint16_t tmc2130_rd_TSTEP(uint8_t cs)
|
|
{
|
|
uint32_t val32 = 0;
|
|
tmc2130_rd(cs, TMC2130_REG_TSTEP, &val32);
|
|
if (val32 & 0x000f0000) return 0xffff;
|
|
return val32 & 0xffff;
|
|
}
|
|
|
|
uint16_t tmc2130_rd_DRV_STATUS(uint8_t cs)
|
|
{
|
|
uint32_t val32 = 0;
|
|
tmc2130_rd(cs, TMC2130_REG_DRV_STATUS, &val32);
|
|
return val32;
|
|
}
|
|
|
|
void tmc2130_wr_CHOPCONF(uint8_t cs, bool extrapolate256, uint16_t microstep_resolution)
|
|
{
|
|
uint8_t mres=0b0100;
|
|
if(microstep_resolution == 256) mres = 0b0000;
|
|
if(microstep_resolution == 128) mres = 0b0001;
|
|
if(microstep_resolution == 64) mres = 0b0010;
|
|
if(microstep_resolution == 32) mres = 0b0011;
|
|
if(microstep_resolution == 16) mres = 0b0100;
|
|
if(microstep_resolution == 8) mres = 0b0101;
|
|
if(microstep_resolution == 4) mres = 0b0110;
|
|
if(microstep_resolution == 2) mres = 0b0111;
|
|
if(microstep_resolution == 1) mres = 0b1000;
|
|
mres |= extrapolate256 << 4; //bit28 intpol
|
|
//tmc2130_write(cs,0x6C,mres,0x01,0x00,0xD3);
|
|
// tmc2130_write(cs,0x6C,mres,0x01,0x00,0xC3);
|
|
tmc2130_wr(cs,TMC2130_REG_CHOPCONF,((uint32_t)mres << 24) | 0x0100C3);
|
|
}
|
|
|
|
void tmc2130_wr_PWMCONF(uint8_t cs, uint8_t PWMautoScale, uint8_t PWMfreq, uint8_t PWMgrad, uint8_t PWMampl)
|
|
{
|
|
tmc2130_wr(cs, TMC2130_REG_PWMCONF, ((uint32_t)(PWMautoScale+PWMfreq) << 16) | ((uint32_t)PWMgrad << 8) | PWMampl); // TMC LJ -> For better readability changed to 0x00 and added PWMautoScale and PWMfreq
|
|
}
|
|
|
|
void tmc2130_wr_TPWMTHRS(uint8_t cs, uint32_t val32)
|
|
{
|
|
tmc2130_wr(cs, TMC2130_REG_TPWMTHRS, val32);
|
|
}
|
|
|
|
void tmc2130_wr_THIGH(uint8_t cs, uint32_t val32)
|
|
{
|
|
tmc2130_wr(cs, TMC2130_REG_THIGH, val32);
|
|
}
|
|
|
|
|
|
uint8_t tmc2130_axis_by_cs(uint8_t cs)
|
|
{
|
|
switch (cs)
|
|
{
|
|
case X_TMC2130_CS: return 0;
|
|
case Y_TMC2130_CS: return 1;
|
|
case Z_TMC2130_CS: return 2;
|
|
case E0_TMC2130_CS: return 3;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
uint8_t tmc2130_wr(uint8_t cs, uint8_t addr, uint32_t wval)
|
|
{
|
|
uint8_t stat = tmc2130_txrx(cs, addr | 0x80, wval, 0);
|
|
#ifdef TMC2130_DEBUG_WR
|
|
MYSERIAL.print("tmc2130_wr(");
|
|
MYSERIAL.print((unsigned char)tmc2130_axis_by_cs(cs), DEC);
|
|
MYSERIAL.print(", 0x");
|
|
MYSERIAL.print((unsigned char)addr, HEX);
|
|
MYSERIAL.print(", 0x");
|
|
MYSERIAL.print((unsigned long)wval, HEX);
|
|
MYSERIAL.print(")=0x");
|
|
MYSERIAL.println((unsigned char)stat, HEX);
|
|
#endif //TMC2130_DEBUG_WR
|
|
return stat;
|
|
}
|
|
|
|
uint8_t tmc2130_rd(uint8_t cs, uint8_t addr, uint32_t* rval)
|
|
{
|
|
uint32_t val32 = 0;
|
|
uint8_t stat = tmc2130_txrx(cs, addr, 0x00000000, &val32);
|
|
if (rval != 0) *rval = val32;
|
|
#ifdef TMC2130_DEBUG_RD
|
|
MYSERIAL.print("tmc2130_rd(");
|
|
MYSERIAL.print((unsigned char)tmc2130_axis_by_cs(cs), DEC);
|
|
MYSERIAL.print(", 0x");
|
|
MYSERIAL.print((unsigned char)addr, HEX);
|
|
MYSERIAL.print(", 0x");
|
|
MYSERIAL.print((unsigned long)val32, HEX);
|
|
MYSERIAL.print(")=0x");
|
|
MYSERIAL.println((unsigned char)stat, HEX);
|
|
#endif //TMC2130_DEBUG_RD
|
|
return stat;
|
|
}
|
|
|
|
uint8_t tmc2130_txrx(uint8_t cs, uint8_t addr, uint32_t wval, uint32_t* rval)
|
|
{
|
|
//datagram1 - request
|
|
SPI.beginTransaction(SPISettings(4000000, MSBFIRST, SPI_MODE3));
|
|
digitalWrite(cs, LOW);
|
|
SPI.transfer(addr); // address
|
|
SPI.transfer((wval >> 24) & 0xff); // MSB
|
|
SPI.transfer((wval >> 16) & 0xff);
|
|
SPI.transfer((wval >> 8) & 0xff);
|
|
SPI.transfer(wval & 0xff); // LSB
|
|
digitalWrite(cs, HIGH);
|
|
SPI.endTransaction();
|
|
//datagram2 - response
|
|
SPI.beginTransaction(SPISettings(4000000, MSBFIRST, SPI_MODE3));
|
|
digitalWrite(cs, LOW);
|
|
uint8_t stat = SPI.transfer(0); // status
|
|
uint32_t val32 = 0;
|
|
val32 = SPI.transfer(0); // MSB
|
|
val32 = (val32 << 8) | SPI.transfer(0);
|
|
val32 = (val32 << 8) | SPI.transfer(0);
|
|
val32 = (val32 << 8) | SPI.transfer(0); // LSB
|
|
digitalWrite(cs, HIGH);
|
|
SPI.endTransaction();
|
|
if (rval != 0) *rval = val32;
|
|
return stat;
|
|
}
|
|
|
|
#endif //HAVE_TMC2130_DRIVERS
|