3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ba49c21f17
Prusa-Firmware/Firmware
History
bubnikv ba49c21f17 Unified the volumetric_multiplier with extrusion_multiply to improve 
numeric accuracy and to reduce compuatitonal load. With this commit,
the numeric rounding is fixed not only for the M221 G-code
(as implemented by the preceding commit), but also for the volumetric
extrusion in general.

Removed the old FILAMENT_SENSOR code, which served the purpose
to modulate the volumetric multiplayer in real time depending
on the measured filament diameter. This feature will certainly not be
used by Prusa Research in the near future as we know of no sensor,
which would offer sufficient accuracy for a reasonable price.
2018-02-21 11:25:21 +01:00
..
variants Removed SG software homming 2017-12-15 14:10:20 +01:00
adc.c Removed debug messages from serial comunication (octoprint...). 2017-12-27 20:29:24 +01:00
adc.h new module adc (analog2digital) 2017-12-20 13:42:20 +01:00
BlinkM.cpp Build 109 2017-11-16 22:03:36 +01:00
BlinkM.h Build 109 2017-11-16 22:03:36 +01:00
boards.h EINY -> EINSY 2017-11-27 18:47:48 +01:00
cardreader.cpp cardreader - new member "paused" 2018-01-31 15:20:27 +01:00
cardreader.h cardreader - new member "paused" 2018-01-31 15:20:27 +01:00
cmdqueue.cpp Documented the interrupt blocking by a main thread by its maximum time. 2018-01-20 14:58:30 +01:00
cmdqueue.h Minimize risk of stepper routine interrupt blocking by reorganizing 2018-01-20 14:37:22 +01:00
config.h new module adc (analog2digital) 2017-12-20 13:42:20 +01:00
Configuration_adv.h Missing serial characters debuging 2018-01-02 20:55:33 +01:00
Configuration_prusa.h tmc2130 optimalization, accurate homing and microstep linearity correction 2018-02-15 04:17:58 +01:00
Configuration.h Unified the volumetric_multiplier with extrusion_multiply to improve 2018-02-21 11:25:21 +01:00
ConfigurationStore.cpp Unified the volumetric_multiplier with extrusion_multiply to improve 2018-02-21 11:25:21 +01:00
ConfigurationStore.h Inform user that hardcoded default settings were loaded (EEPROM version change) 2018-01-30 11:31:44 +01:00
Dcodes.cpp Microstep linearity correction, optimized wave compression. 2018-02-17 19:58:40 +01:00
Dcodes.h tmc2130 optimalization, accurate homing and microstep linearity correction 2018-02-15 04:17:58 +01:00
digipot_mcp4451.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
dogm_font_data_marlin.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
dogm_lcd_implementation.h tmc2130 optimalization, accurate homing and microstep linearity correction 2018-02-15 04:17:58 +01:00
DOGMbitmaps.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
fastio.h WRITE_NC macro for non-critical (non-synchronized) access to 2018-01-12 20:15:59 +01:00
Firmware.ino opravene nezadouci resetovani watchdogem 2017-11-27 14:43:56 +01:00
Firmware.ino.rambo.hex build 143e 2018-01-04 18:08:22 +01:00
Firmware.sublime-project 3.0.6 sync 2016-08-11 10:42:53 +02:00
fsensor.cpp filament sensor additional check after runout (3mm back, 3mm forward @200mm/min) 2018-01-31 21:10:41 +01:00
fsensor.h Wizard: dont ask if color is clear and dont use automatic filament load; multiscreen messages update 2017-12-20 13:33:45 +01:00
langtool.php 3.0.6 sync 2016-08-11 10:42:53 +02:00
langtool.pl merging from dev/MK3 2017-12-02 21:56:39 +01:00
language_all.cpp erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used 2018-02-05 16:49:06 +01:00
language_all.h Merge pull request #440 from XPila/3.1.1-RC6 2018-01-31 20:21:02 +01:00
language_common.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
language_cz.h erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used 2018-02-05 16:49:06 +01:00
language_de.h basic language corrections 2017-11-21 14:44:07 +01:00
language_en.h erase eeprom section which belongs to M500 gcode in case that version was changed and default settings are used 2018-02-05 16:49:06 +01:00
language_es.h basic language corrections 2017-11-21 14:44:07 +01:00
language_it.h basic language corrections 2017-11-21 14:44:07 +01:00
language_pl.h basic language corrections 2017-11-21 14:44:07 +01:00
language.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
le.sh 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
LiquidCrystal.cpp Print class printf function (experimental, disabled by default) 2017-11-20 20:09:54 +01:00
LiquidCrystal.h Print class printf function (experimental, disabled by default) 2017-11-20 20:09:54 +01:00
Marlin_main.cpp Unified the volumetric_multiplier with extrusion_multiply to improve 2018-02-21 11:25:21 +01:00
Marlin.h Unified the volumetric_multiplier with extrusion_multiply to improve 2018-02-21 11:25:21 +01:00
MarlinSerial.cpp Optimized the MarlinSerial class by declaring all methods static. 2018-02-02 20:25:19 +01:00
MarlinSerial.h Optimized the MarlinSerial class by declaring all methods static. 2018-02-02 20:25:19 +01:00
mesh_bed_calibration.cpp Removed debug messages from serial comunication (octoprint...). 2017-12-27 20:29:24 +01:00
mesh_bed_calibration.h Fixed homing (mbl and babystep - crashdetection recovery work fine now). 2017-09-23 16:35:01 +02:00
mesh_bed_leveling.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
mesh_bed_leveling.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
motion_control.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
motion_control.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
pat9125.cpp Optimization of the filament sensor. 2018-01-23 16:47:42 +01:00
pat9125.h Optimization of the filament sensor. 2018-01-23 16:47:42 +01:00
pins_Einy_0_3.h PINDA thermistor and ambient thermistor. 2017-09-05 14:02:35 +02:00
pins_Einy_0_4.h Definition of 8 pins on the Einsy 0.4 board connected to pin headers 2018-01-12 20:18:20 +01:00
pins_Rambo_1_0.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
pins_Rambo_1_3.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
pins_Rambo.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
pins.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
planner.cpp Unified the volumetric_multiplier with extrusion_multiply to improve 2018-02-21 11:25:21 +01:00
planner.h M350 for E axis (8, 16, 32, 64, 128 microsteps) 2018-02-15 15:40:49 +01:00
qr_solve.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
qr_solve.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
Sd2Card.cpp 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
Sd2Card.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
Sd2PinMap.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdBaseFile.cpp first working version 2017-11-27 06:20:51 +01:00
SdBaseFile.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdFatConfig.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
SdFatStructs.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
SdFatUtil.cpp 3.0.10 sync 2017-03-24 19:47:50 +01:00
SdFatUtil.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdFile.cpp 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdFile.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
SdInfo.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdVolume.cpp 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
SdVolume.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
Servo.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
Servo.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
speed_lookuptable.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
stepper.cpp M350 for E axis (8, 16, 32, 64, 128 microsteps) 2018-02-15 15:40:49 +01:00
stepper.h Implemented a stepper timer reset after a long blocking cli() 2018-01-20 15:39:21 +01:00
swi2c.cpp PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
swi2c.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
swspi.cpp PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
swspi.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
temperature.cpp Unified the volumetric_multiplier with extrusion_multiply to improve 2018-02-21 11:25:21 +01:00
temperature.h Unified the volumetric_multiplier with extrusion_multiply to improve 2018-02-21 11:25:21 +01:00
thermistortables.h new ambient thermistor table 2017-12-12 22:49:47 +01:00
tmc2130.cpp Microstep linearity correction, optimized wave compression. 2018-02-17 19:58:40 +01:00
tmc2130.h Microstep linearity correction, optimized wave compression. 2018-02-17 19:58:40 +01:00
ultralcd_implementation_hitachi_HD44780.h tmc2130 optimalization, accurate homing and microstep linearity correction 2018-02-15 04:17:58 +01:00
ultralcd_st7920_u8glib_rrd.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
ultralcd.cpp Microstep linearity correction, optimized wave compression. 2018-02-17 19:58:40 +01:00
ultralcd.h M600 has timeout for nozzle, different procedure for unload 2018-01-15 11:30:28 +01:00
uni_avr_rpi.h PAT9125 I2C, hardware SG homing 2017-08-17 15:23:34 +02:00
util.cpp fw version check: FW_VERSION string is case insensitive (parsing RC works) 2018-02-01 20:23:45 +01:00
util.h 3.0.12-RC2 sync 2017-06-29 18:35:43 +02:00
vector_3.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
vector_3.h 3.0.6 sync 2016-08-11 10:42:53 +02:00
watchdog.cpp 3.0.6 sync 2016-08-11 10:42:53 +02:00
watchdog.h 3.0.6 sync 2016-08-11 10:42:53 +02:00