3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ba90ee3e28
Prusa-Firmware/Firmware/cmdqueue.cpp
Yuri D'Elia 23c75da727 Fix Crash/PP recovery position on instructions with comments 
PR #2967 altered the way ``sdpos_atomic`` was set, causing issues in the
crashdetect/powerpanic recovery offset if the instruction being
recovered happens to contain a comment.

Previously ``sdpos`` was assumed to be a single byte prior to the last
read character. sdpos+1 would thus position the index to the next
instruction. With gcode-filtering in place, sdpos is left just before
the comment, while the actual read position is at the newline. This
causes to parser to resume in the middle of the comment.

Change the value returned by cardreader::get_sdpos() to always return
the last read position, as everybody expects (!!).

This avoids the +1, and correctly sets the resume position to the next
valid instruction without overhead.
2021-04-19 06:30:37 +02:00

715 lines
27 KiB
C++
Executable File
Raw Blame History

#include "cmdqueue.h"
#include "cardreader.h"
#include "ultralcd.h"
extern bool Stopped;
// Reserve BUFSIZE lines of length MAX_CMD_SIZE plus CMDBUFFER_RESERVE_FRONT.
char cmdbuffer[BUFSIZE * (MAX_CMD_SIZE + 1) + CMDBUFFER_RESERVE_FRONT];
// Head of the circular buffer, where to read.
size_t bufindr = 0;
// Tail of the buffer, where to write.
static size_t bufindw = 0;
// Number of lines in cmdbuffer.
int buflen = 0;
// Flag for processing the current command inside the main Arduino loop().
// If a new command was pushed to the front of a command buffer while
// processing another command, this replaces the command on the top.
// Therefore don't remove the command from the queue in the loop() function.
bool cmdbuffer_front_already_processed = false;
// Used for temporarely preventing accidental adding of Serial commands to the queue.
// For now only check_file and the fancheck pause use this.
bool cmdqueue_serial_disabled = false;
int serial_count = 0; //index of character read from serial line
boolean comment_mode = false;
char *strchr_pointer; // just a pointer to find chars in the command string like X, Y, Z, E, etc
unsigned long TimeSent = _millis();
unsigned long TimeNow = _millis();
long gcode_N = 0;
long gcode_LastN = 0;
long Stopped_gcode_LastN = 0;
uint32_t sdpos_atomic = 0;
// Pop the currently processed command from the queue.
// It is expected, that there is at least one command in the queue.
bool cmdqueue_pop_front()
{
if (buflen > 0) {
#ifdef CMDBUFFER_DEBUG
SERIAL_ECHOPGM("Dequeing ");
SERIAL_ECHO(cmdbuffer+bufindr+CMDHDRSIZE);
SERIAL_ECHOLNPGM("");
SERIAL_ECHOPGM("Old indices: buflen ");
SERIAL_ECHO(buflen);
SERIAL_ECHOPGM(", bufindr ");
SERIAL_ECHO(bufindr);
SERIAL_ECHOPGM(", bufindw ");
SERIAL_ECHO(bufindw);
SERIAL_ECHOPGM(", serial_count ");
SERIAL_ECHO(serial_count);
SERIAL_ECHOPGM(", bufsize ");
SERIAL_ECHO(sizeof(cmdbuffer));
SERIAL_ECHOLNPGM("");
#endif /* CMDBUFFER_DEBUG */
if (-- buflen == 0) {
// Empty buffer.
if (serial_count == 0)
// No serial communication is pending. Reset both pointers to zero.
bufindw = 0;
bufindr = bufindw;
} else {
// There is at least one ready line in the buffer.
// First skip the current command ID and iterate up to the end of the string.
for (bufindr += CMDHDRSIZE; cmdbuffer[bufindr] != 0; ++ bufindr) ;
// Second, skip the end of string null character and iterate until a nonzero command ID is found.
for (++ bufindr; bufindr < sizeof(cmdbuffer) && cmdbuffer[bufindr] == 0; ++ bufindr) ;
// If the end of the buffer was empty,
if (bufindr == sizeof(cmdbuffer)) {
// skip to the start and find the nonzero command.
for (bufindr = 0; cmdbuffer[bufindr] == 0; ++ bufindr) ;
}
#ifdef CMDBUFFER_DEBUG
SERIAL_ECHOPGM("New indices: buflen ");
SERIAL_ECHO(buflen);
SERIAL_ECHOPGM(", bufindr ");
SERIAL_ECHO(bufindr);
SERIAL_ECHOPGM(", bufindw ");
SERIAL_ECHO(bufindw);
SERIAL_ECHOPGM(", serial_count ");
SERIAL_ECHO(serial_count);
SERIAL_ECHOPGM(" new command on the top: ");
SERIAL_ECHO(cmdbuffer+bufindr+CMDHDRSIZE);
SERIAL_ECHOLNPGM("");
#endif /* CMDBUFFER_DEBUG */
}
return true;
}
return false;
}
void cmdqueue_reset()
{
while (buflen)
{
// printf_P(PSTR("dumping: \"%s\" of type %hu\n"), cmdbuffer+bufindr+CMDHDRSIZE, CMDBUFFER_CURRENT_TYPE);
ClearToSend();
cmdqueue_pop_front();
}
bufindr = 0;
bufindw = 0;
//commands are removed from command queue after process_command() function is finished
//reseting command queue and enqueing new commands during some (usually long running) command processing would cause that new commands are immediately removed from queue (or damaged)
//this will ensure that all new commands which are enqueued after cmdqueue reset, will be always executed
cmdbuffer_front_already_processed = true;
}
// How long a string could be pushed to the front of the command queue?
// If yes, adjust bufindr to the new position, where the new command could be enqued.
// len_asked does not contain the zero terminator size.
static bool cmdqueue_could_enqueue_front(size_t len_asked)
{
// MAX_CMD_SIZE has to accommodate the zero terminator.
if (len_asked >= MAX_CMD_SIZE)
return false;
// Remove the currently processed command from the queue.
if (! cmdbuffer_front_already_processed) {
cmdqueue_pop_front();
cmdbuffer_front_already_processed = true;
}
if (bufindr == bufindw && buflen > 0)
// Full buffer.
return false;
// Adjust the end of the write buffer based on whether a partial line is in the receive buffer.
int endw = (serial_count > 0) ? (bufindw + MAX_CMD_SIZE + 1) : bufindw;
if (bufindw < bufindr) {
int bufindr_new = bufindr - len_asked - (1 + CMDHDRSIZE);
// Simple case. There is a contiguous space between the write buffer and the read buffer.
if (endw <= bufindr_new) {
bufindr = bufindr_new;
return true;
}
} else {
// Otherwise the free space is split between the start and end.
if (len_asked + (1 + CMDHDRSIZE) <= bufindr) {
// Could fit at the start.
bufindr -= len_asked + (1 + CMDHDRSIZE);
return true;
}
int bufindr_new = sizeof(cmdbuffer) - len_asked - (1 + CMDHDRSIZE);
if (endw <= bufindr_new) {
memset(cmdbuffer, 0, bufindr);
bufindr = bufindr_new;
return true;
}
}
return false;
}
// Could one enqueue a command of length len_asked into the buffer,
// while leaving CMDBUFFER_RESERVE_FRONT at the start?
// If yes, adjust bufindw to the new position, where the new command could be enqued.
// len_asked does not contain the zero terminator size.
// This function may update bufindw, therefore for the power panic to work, this function must be called
// with the interrupts disabled!
static bool cmdqueue_could_enqueue_back(size_t len_asked, bool atomic_update = false)
{
// MAX_CMD_SIZE has to accommodate the zero terminator.
if (len_asked >= MAX_CMD_SIZE)
return false;
if (bufindr == bufindw && buflen > 0)
// Full buffer.
return false;
if (serial_count > 0) {
// If there is some data stored starting at bufindw, len_asked is certainly smaller than
// the allocated data buffer. Try to reserve a new buffer and to move the already received
// serial data.
// How much memory to reserve for the commands pushed to the front?
// End of the queue, when pushing to the end.
size_t endw = bufindw + len_asked + (1 + CMDHDRSIZE);
if (bufindw < bufindr)
// Simple case. There is a contiguous space between the write buffer and the read buffer.
return endw + CMDBUFFER_RESERVE_FRONT <= bufindr;
// Otherwise the free space is split between the start and end.
if (// Could one fit to the end, including the reserve?
endw + CMDBUFFER_RESERVE_FRONT <= sizeof(cmdbuffer) ||
// Could one fit to the end, and the reserve to the start?
(endw <= sizeof(cmdbuffer) && CMDBUFFER_RESERVE_FRONT <= bufindr))
return true;
// Could one fit both to the start?
if (len_asked + (1 + CMDHDRSIZE) + CMDBUFFER_RESERVE_FRONT <= bufindr) {
// Mark the rest of the buffer as used.
memset(cmdbuffer+bufindw, 0, sizeof(cmdbuffer)-bufindw);
// and point to the start.
// Be careful! The bufindw needs to be changed atomically for the power panic & filament panic to work.
if (atomic_update)
cli();
bufindw = 0;
if (atomic_update)
sei();
return true;
}
} else {
// How much memory to reserve for the commands pushed to the front?
// End of the queue, when pushing to the end.
size_t endw = bufindw + len_asked + (1 + CMDHDRSIZE);
if (bufindw < bufindr)
// Simple case. There is a contiguous space between the write buffer and the read buffer.
return endw + CMDBUFFER_RESERVE_FRONT <= bufindr;
// Otherwise the free space is split between the start and end.
if (// Could one fit to the end, including the reserve?
endw + CMDBUFFER_RESERVE_FRONT <= sizeof(cmdbuffer) ||
// Could one fit to the end, and the reserve to the start?
(endw <= sizeof(cmdbuffer) && CMDBUFFER_RESERVE_FRONT <= bufindr))
return true;
// Could one fit both to the start?
if (len_asked + (1 + CMDHDRSIZE) + CMDBUFFER_RESERVE_FRONT <= bufindr) {
// Mark the rest of the buffer as used.
memset(cmdbuffer+bufindw, 0, sizeof(cmdbuffer)-bufindw);
// and point to the start.
// Be careful! The bufindw needs to be changed atomically for the power panic & filament panic to work.
if (atomic_update)
cli();
bufindw = 0;
if (atomic_update)
sei();
return true;
}
}
return false;
}
#ifdef CMDBUFFER_DEBUG
void cmdqueue_dump_to_serial_single_line(int nr, const char *p)
{
SERIAL_ECHOPGM("Entry nr: ");
SERIAL_ECHO(nr);
SERIAL_ECHOPGM(", type: ");
int type = *p;
SERIAL_ECHO(type);
SERIAL_ECHOPGM(", size: ");
unsigned int size = *(unsigned int*)(p + 1);
SERIAL_ECHO(size);
SERIAL_ECHOPGM(", cmd: ");
SERIAL_ECHO(p + CMDHDRSIZE);
SERIAL_ECHOLNPGM("");
}
void cmdqueue_dump_to_serial()
{
if (buflen == 0) {
SERIAL_ECHOLNPGM("The command buffer is empty.");
} else {
SERIAL_ECHOPGM("Content of the buffer: entries ");
SERIAL_ECHO(buflen);
SERIAL_ECHOPGM(", indr ");
SERIAL_ECHO(bufindr);
SERIAL_ECHOPGM(", indw ");
SERIAL_ECHO(bufindw);
SERIAL_ECHOLNPGM("");
int nr = 0;
if (bufindr < bufindw) {
for (const char *p = cmdbuffer + bufindr; p < cmdbuffer + bufindw; ++ nr) {
cmdqueue_dump_to_serial_single_line(nr, p);
// Skip the command.
for (p += CMDHDRSIZE; *p != 0; ++ p);
// Skip the gaps.
for (++p; p < cmdbuffer + bufindw && *p == 0; ++ p);
}
} else {
for (const char *p = cmdbuffer + bufindr; p < cmdbuffer + sizeof(cmdbuffer); ++ nr) {
cmdqueue_dump_to_serial_single_line(nr, p);
// Skip the command.
for (p += CMDHDRSIZE; *p != 0; ++ p);
// Skip the gaps.
for (++p; p < cmdbuffer + sizeof(cmdbuffer) && *p == 0; ++ p);
}
for (const char *p = cmdbuffer; p < cmdbuffer + bufindw; ++ nr) {
cmdqueue_dump_to_serial_single_line(nr, p);
// Skip the command.
for (p += CMDHDRSIZE; *p != 0; ++ p);
// Skip the gaps.
for (++p; p < cmdbuffer + bufindw && *p == 0; ++ p);
}
}
SERIAL_ECHOLNPGM("End of the buffer.");
}
}
#endif /* CMDBUFFER_DEBUG */
//adds an command to the main command buffer
//thats really done in a non-safe way.
//needs overworking someday
// Currently the maximum length of a command piped through this function is around 20 characters
void enquecommand(const char *cmd, bool from_progmem)
{
size_t len = from_progmem ? strlen_P(cmd) : strlen(cmd);
// Does cmd fit the queue while leaving sufficient space at the front for the chained commands?
// If it fits, it may move bufindw, so it points to a contiguous buffer, which fits cmd.
if (cmdqueue_could_enqueue_back(len)) {
// This is dangerous if a mixing of serial and this happens
// This may easily be tested: If serial_count > 0, we have a problem.
cmdbuffer[bufindw] = CMDBUFFER_CURRENT_TYPE_UI;
if (from_progmem)
strcpy_P(cmdbuffer + bufindw + CMDHDRSIZE, cmd);
else
strcpy(cmdbuffer + bufindw + CMDHDRSIZE, cmd);
SERIAL_ECHO_START;
SERIAL_ECHORPGM(MSG_Enqueing);
SERIAL_ECHO(cmdbuffer + bufindw + CMDHDRSIZE);
SERIAL_ECHOLNPGM("\"");
bufindw += len + (CMDHDRSIZE + 1);
if (bufindw == sizeof(cmdbuffer))
bufindw = 0;
++ buflen;
#ifdef CMDBUFFER_DEBUG
cmdqueue_dump_to_serial();
#endif /* CMDBUFFER_DEBUG */
} else {
SERIAL_ERROR_START;
SERIAL_ECHORPGM(MSG_Enqueing);
if (from_progmem)
SERIAL_PROTOCOLRPGM(cmd);
else
SERIAL_ECHO(cmd);
SERIAL_ECHOLNPGM("\" failed: Buffer full!");
#ifdef CMDBUFFER_DEBUG
cmdqueue_dump_to_serial();
#endif /* CMDBUFFER_DEBUG */
}
}
bool cmd_buffer_empty()
{
return (buflen == 0);
}
void enquecommand_front(const char *cmd, bool from_progmem)
{
size_t len = from_progmem ? strlen_P(cmd) : strlen(cmd);
// Does cmd fit the queue? This call shall move bufindr, so the command may be copied.
if (cmdqueue_could_enqueue_front(len)) {
cmdbuffer[bufindr] = CMDBUFFER_CURRENT_TYPE_UI;
if (from_progmem)
strcpy_P(cmdbuffer + bufindr + CMDHDRSIZE, cmd);
else
strcpy(cmdbuffer + bufindr + CMDHDRSIZE, cmd);
++ buflen;
SERIAL_ECHO_START;
SERIAL_ECHOPGM("Enqueing to the front: \"");
SERIAL_ECHO(cmdbuffer + bufindr + CMDHDRSIZE);
SERIAL_ECHOLNPGM("\"");
#ifdef CMDBUFFER_DEBUG
cmdqueue_dump_to_serial();
#endif /* CMDBUFFER_DEBUG */
} else {
SERIAL_ERROR_START;
SERIAL_ECHOPGM("Enqueing to the front: \"");
if (from_progmem)
SERIAL_PROTOCOLRPGM(cmd);
else
SERIAL_ECHO(cmd);
SERIAL_ECHOLNPGM("\" failed: Buffer full!");
#ifdef CMDBUFFER_DEBUG
cmdqueue_dump_to_serial();
#endif /* CMDBUFFER_DEBUG */
}
}
// Mark the command at the top of the command queue as new.
// Therefore it will not be removed from the queue.
void repeatcommand_front()
{
cmdbuffer_front_already_processed = true;
}
void proc_commands() {
if (buflen)
{
process_commands();
if (!cmdbuffer_front_already_processed)
cmdqueue_pop_front();
cmdbuffer_front_already_processed = false;
}
}
void get_command()
{
// Test and reserve space for the new command string.
if (! cmdqueue_could_enqueue_back(MAX_CMD_SIZE - 1, true))
return;
if (MYSERIAL.available() == RX_BUFFER_SIZE - 1) { //compare number of chars buffered in rx buffer with rx buffer size
MYSERIAL.flush();
SERIAL_ECHOLNPGM("Full RX Buffer"); //if buffer was full, there is danger that reading of last gcode will not be completed
}
// start of serial line processing loop
while (((MYSERIAL.available() > 0 && !saved_printing) || (MYSERIAL.available() > 0 && isPrintPaused)) && !cmdqueue_serial_disabled) { //is print is saved (crash detection or filament detection), dont process data from serial line
char serial_char = MYSERIAL.read();
/* if (selectedSerialPort == 1)
{
selectedSerialPort = 0;
MYSERIAL.write(serial_char); // for debuging serial line 2 in farm_mode
selectedSerialPort = 1;
} */ //RP - removed
TimeSent = _millis();
TimeNow = _millis();
if (serial_char < 0)
// Ignore extended ASCII characters. These characters have no meaning in the G-code apart from the file names
// and Marlin does not support such file names anyway.
// Serial characters with a highest bit set to 1 are generated when the USB cable is unplugged, leading
// to a hang-up of the print process from an SD card.
continue;
if(serial_char == '\n' ||
serial_char == '\r' ||
serial_count >= (MAX_CMD_SIZE - 1) )
{
if(!serial_count) { //if empty line
comment_mode = false; //for new command
return;
}
cmdbuffer[bufindw+serial_count+CMDHDRSIZE] = 0; //terminate string
if(!comment_mode){
gcode_N = 0;
// Line numbers must be first in buffer
if ((strstr(cmdbuffer+bufindw+CMDHDRSIZE, "PRUSA") == NULL) &&
(cmdbuffer[bufindw+CMDHDRSIZE] == 'N')) {
// Line number met. When sending a G-code over a serial line, each line may be stamped with its index,
// and Marlin tests, whether the successive lines are stamped with an increasing line number ID
gcode_N = (strtol(cmdbuffer+bufindw+CMDHDRSIZE+1, NULL, 10));
if(gcode_N != gcode_LastN+1 && (strstr_P(cmdbuffer+bufindw+CMDHDRSIZE, PSTR("M110")) == NULL) ) {
// M110 - set current line number.
// Line numbers not sent in succession.
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(_n("Line Number is not Last Line Number+1, Last Line: "));////MSG_ERR_LINE_NO
SERIAL_ERRORLN(gcode_LastN);
//Serial.println(gcode_N);
FlushSerialRequestResend();
serial_count = 0;
return;
}
if((strchr_pointer = strchr(cmdbuffer+bufindw+CMDHDRSIZE, '*')) != NULL)
{
byte checksum = 0;
char *p = cmdbuffer+bufindw+CMDHDRSIZE;
while (p != strchr_pointer)
checksum = checksum^(*p++);
if (int(strtol(strchr_pointer+1, NULL, 10)) != int(checksum)) {
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(_n("checksum mismatch, Last Line: "));////MSG_ERR_CHECKSUM_MISMATCH
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
return;
}
// If no errors, remove the checksum and continue parsing.
*strchr_pointer = 0;
}
else
{
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(_n("No Checksum with line number, Last Line: "));////MSG_ERR_NO_CHECKSUM
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
return;
}
// Don't parse N again with code_seen('N')
cmdbuffer[bufindw + CMDHDRSIZE] = '$';
//if no errors, continue parsing
gcode_LastN = gcode_N;
}
// if we don't receive 'N' but still see '*'
if ((cmdbuffer[bufindw + CMDHDRSIZE] != 'N') && (cmdbuffer[bufindw + CMDHDRSIZE] != '$') && (strchr(cmdbuffer+bufindw+CMDHDRSIZE, '*') != NULL))
{
SERIAL_ERROR_START;
SERIAL_ERRORRPGM(_n("No Line Number with checksum, Last Line: "));////MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
return;
}
if ((strchr_pointer = strchr(cmdbuffer+bufindw+CMDHDRSIZE, 'G')) != NULL) {
if (! IS_SD_PRINTING) {
usb_printing_counter = 10;
is_usb_printing = true;
}
if (Stopped == true) {
int gcode = strtol(strchr_pointer+1, NULL, 10);
if (gcode >= 0 && gcode <= 3) {
SERIAL_ERRORLNRPGM(MSG_ERR_STOPPED);
LCD_MESSAGERPGM(_T(MSG_STOPPED));
}
}
} // end of 'G' command
//If command was e-stop process now
if(strcmp(cmdbuffer+bufindw+CMDHDRSIZE, "M112") == 0)
kill(MSG_M112_KILL, 2);
// Store the current line into buffer, move to the next line.
// Store type of entry
cmdbuffer[bufindw] = gcode_N ? CMDBUFFER_CURRENT_TYPE_USB_WITH_LINENR : CMDBUFFER_CURRENT_TYPE_USB;
#ifdef CMDBUFFER_DEBUG
SERIAL_ECHO_START;
SERIAL_ECHOPGM("Storing a command line to buffer: ");
SERIAL_ECHO(cmdbuffer+bufindw+CMDHDRSIZE);
SERIAL_ECHOLNPGM("");
#endif /* CMDBUFFER_DEBUG */
bufindw += strlen(cmdbuffer+bufindw+CMDHDRSIZE) + (1 + CMDHDRSIZE);
if (bufindw == sizeof(cmdbuffer))
bufindw = 0;
++ buflen;
#ifdef CMDBUFFER_DEBUG
SERIAL_ECHOPGM("Number of commands in the buffer: ");
SERIAL_ECHO(buflen);
SERIAL_ECHOLNPGM("");
#endif /* CMDBUFFER_DEBUG */
} // end of 'not comment mode'
serial_count = 0; //clear buffer
// Don't call cmdqueue_could_enqueue_back if there are no characters waiting
// in the queue, as this function will reserve the memory.
if (MYSERIAL.available() == 0 || ! cmdqueue_could_enqueue_back(MAX_CMD_SIZE-1, true))
return;
} // end of "end of line" processing
else {
// Not an "end of line" symbol. Store the new character into a buffer.
if(serial_char == ';') comment_mode = true;
if(!comment_mode) cmdbuffer[bufindw+CMDHDRSIZE+serial_count++] = serial_char;
}
} // end of serial line processing loop
if(farm_mode){
TimeNow = _millis();
if ( ((TimeNow - TimeSent) > 800) && (serial_count > 0) ) {
cmdbuffer[bufindw+serial_count+CMDHDRSIZE] = 0;
bufindw += strlen(cmdbuffer+bufindw+CMDHDRSIZE) + (1 + CMDHDRSIZE);
if (bufindw == sizeof(cmdbuffer))
bufindw = 0;
++ buflen;
serial_count = 0;
SERIAL_ECHOPGM("TIMEOUT:");
//memset(cmdbuffer, 0 , sizeof(cmdbuffer));
return;
}
}
#ifdef SDSUPPORT
if(!card.sdprinting || serial_count!=0){
// If there is a half filled buffer from serial line, wait until return before
// continuing with the serial line.
return;
}
//'#' stops reading from SD to the buffer prematurely, so procedural macro calls are possible
// if it occurs, stop_buffering is triggered and the buffer is ran dry.
// this character _can_ occur in serial com, due to checksums. however, no checksums are used in SD printing
static bool stop_buffering=false;
if(buflen==0) stop_buffering=false;
union {
struct {
char lo;
char hi;
} lohi;
uint16_t value;
} sd_count;
sd_count.value = 0;
// Reads whole lines from the SD card. Never leaves a half-filled line in the cmdbuffer.
while( !card.eof() && !stop_buffering) {
int16_t n=card.getFilteredGcodeChar();
char serial_char = (char)n;
if( serial_char == '\n'
|| serial_char == '\r'
|| ((serial_char == '#' || serial_char == ':') )
|| serial_count >= (MAX_CMD_SIZE - 1)
|| n==-1
){
if(serial_char=='#')
stop_buffering=true;
if(!serial_count)
{
// This is either an empty line, or a line with just a comment.
// Continue to the following line, and continue accumulating the number of bytes
// read from the sdcard into sd_count,
// so that the lenght of the already read empty lines and comments will be added
// to the following non-empty line.
return; // prevent cycling indefinitely - let manage_heaters do their job
}
// The new command buffer could be updated non-atomically, because it is not yet considered
// to be inside the active queue.
sd_count.value = card.get_sdpos() - sdpos_atomic;
cmdbuffer[bufindw] = CMDBUFFER_CURRENT_TYPE_SDCARD;
cmdbuffer[bufindw+1] = sd_count.lohi.lo;
cmdbuffer[bufindw+2] = sd_count.lohi.hi;
cmdbuffer[bufindw+serial_count+CMDHDRSIZE] = 0; //terminate string
// Calculate the length before disabling the interrupts.
uint8_t len = strlen(cmdbuffer+bufindw+CMDHDRSIZE) + (1 + CMDHDRSIZE);
// SERIAL_ECHOPGM("SD cmd(");
// MYSERIAL.print(sd_count.value, DEC);
// SERIAL_ECHOPGM(") ");
// SERIAL_ECHOLN(cmdbuffer+bufindw+CMDHDRSIZE);
// SERIAL_ECHOPGM("cmdbuffer:");
// MYSERIAL.print(cmdbuffer);
// SERIAL_ECHOPGM("buflen:");
// MYSERIAL.print(buflen+1);
sd_count.value = 0;
cli();
// This block locks the interrupts globally for 3.56 us,
// which corresponds to a maximum repeat frequency of 280.70 kHz.
// This blocking is safe in the context of a 10kHz stepper driver interrupt
// or a 115200 Bd serial line receive interrupt, which will not trigger faster than 12kHz.
++ buflen;
bufindw += len;
sdpos_atomic = card.get_sdpos();
if (bufindw == sizeof(cmdbuffer))
bufindw = 0;
sei();
comment_mode = false; //for new command
serial_count = 0; //clear buffer
if(card.eof()) break;
// The following line will reserve buffer space if available.
if (! cmdqueue_could_enqueue_back(MAX_CMD_SIZE-1, true))
return;
}
else
{
// there are no comments coming from the filtered file
cmdbuffer[bufindw+CMDHDRSIZE+serial_count++] = serial_char;
}
}
if(card.eof())
{
// file was fully buffered, but commands might still need to be planned!
// do *not* clear sdprinting until all SD commands are consumed to ensure
// SD state can be resumed from a saved printing state. sdprinting is only
// cleared by printingHasFinished after peforming all remaining moves.
if(!cmdqueue_calc_sd_length())
{
SERIAL_PROTOCOLLNRPGM(_n("Done printing file"));////MSG_FILE_PRINTED
stoptime=_millis();
char time[30];
unsigned long t=(stoptime-starttime-pause_time)/1000;
pause_time = 0;
int hours, minutes;
minutes=(t/60)%60;
hours=t/60/60;
save_statistics(total_filament_used, t);
sprintf_P(time, PSTR("%i hours %i minutes"),hours, minutes);
SERIAL_ECHO_START;
SERIAL_ECHOLN(time);
lcd_setstatus(time);
card.printingHasFinished();
card.checkautostart(true);
if (farm_mode)
{
prusa_statistics(6);
lcd_commands_type = LcdCommands::FarmModeConfirm;
}
}
}
#endif //SDSUPPORT
}
uint16_t cmdqueue_calc_sd_length()
{
if (buflen == 0)
return 0;
union {
struct {
char lo;
char hi;
} lohi;
uint16_t value;
} sdlen_single;
uint16_t sdlen = 0;
for (size_t _buflen = buflen, _bufindr = bufindr;;) {
if (cmdbuffer[_bufindr] == CMDBUFFER_CURRENT_TYPE_SDCARD) {
sdlen_single.lohi.lo = cmdbuffer[_bufindr + 1];
sdlen_single.lohi.hi = cmdbuffer[_bufindr + 2];
sdlen += sdlen_single.value;
}
if (-- _buflen == 0)
break;
// First skip the current command ID and iterate up to the end of the string.
for (_bufindr += CMDHDRSIZE; cmdbuffer[_bufindr] != 0; ++ _bufindr) ;
// Second, skip the end of string null character and iterate until a nonzero command ID is found.
for (++ _bufindr; _bufindr < sizeof(cmdbuffer) && cmdbuffer[_bufindr] == 0; ++ _bufindr) ;
// If the end of the buffer was empty,
if (_bufindr == sizeof(cmdbuffer)) {
// skip to the start and find the nonzero command.
for (_bufindr = 0; cmdbuffer[_bufindr] == 0; ++ _bufindr) ;
}
}
return sdlen;
}
Reference in New Issue View Git Blame Copy Permalink