3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c98e133ae2
Prusa-Firmware/Firmware/ultralcd.h
Yuri D'Elia b3ca70a007 Show thermal warnings using the new LCD_MESSAGE_INFO priority 
Add a new LCD_MESSAGE_INFO priority which can be overridden by regular
status updates, but only if a certain amount of time has passed.

Assign a time stamp to all message updates, so that the time since the
last update can be determined. Also switch the message type to Status,
so that the message always becomes visibile.

Always show status or info messages when printing via SD if the message
is recent enough.
2022-07-25 17:30:22 +02:00

249 lines
7.9 KiB
C
Executable File
Raw Blame History

#ifndef ULTRALCD_H
#define ULTRALCD_H
#include "mesh_bed_calibration.h"
#include "config.h"
extern void menu_lcd_longpress_func(void);
extern void menu_lcd_lcdupdate_func(void);
// Call with a false parameter to suppress the LCD update from various places like the planner or the temp control.
void ultralcd_init();
//! LCD status severities
#define LCD_STATUS_CRITICAL 3 //< Heater failure
#define LCD_STATUS_ALERT 2 //< Other hardware issue
#define LCD_STATUS_INFO 1 //< Message times out after a while
#define LCD_STATUS_NONE 0 //< No alert message set
#define LCD_STATUS_INFO_TIMEOUT 20000
// Set the current status message (equivalent to LCD_STATUS_NONE)
void lcd_setstatus(const char* message);
void lcd_setstatuspgm(const char* message);
//! return to the main status screen and display the alert message
//! Beware - it has sideeffects:
//! - always returns the display to the main status screen
//! - always makes lcd_reset (which is slow and causes flicker)
//! - does not update the message if there is one with the same (or higher) severity present
void lcd_setalertstatus(const char* message, uint8_t severity = LCD_STATUS_ALERT);
void lcd_setalertstatuspgm(const char* message, uint8_t severity = LCD_STATUS_ALERT);
//! Get/reset the current alert level
uint8_t get_message_level();
void lcd_reset_alert_level();
void lcd_adjust_z();
void lcd_pick_babystep();
void lcd_alright();
void show_preheat_nozzle_warning();
void lcd_wait_interact();
void lcd_loading_filament();
void lcd_change_success();
void lcd_loading_color();
void lcd_sdcard_stop();
void lcd_pause_print();
void lcd_pause_usb_print();
void lcd_resume_print();
void lcd_print_stop();
void prusa_statistics(uint8_t _message, uint8_t _col_nr = 0);
void lcd_load_filament_color_check();
//void lcd_mylang();
extern void lcd_belttest();
extern bool lcd_selftest();
void lcd_menu_statistics();
void lcd_status_screen(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
void lcd_menu_extruder_info(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
void lcd_menu_show_sensors_state(); // NOT static due to using inside "Marlin_main" module ("manage_inactivity()")
#ifdef TMC2130
bool lcd_crash_detect_enabled();
void lcd_crash_detect_enable();
void lcd_crash_detect_disable();
#endif
extern const char* lcd_display_message_fullscreen_P(const char *msg, uint8_t &nlines);
extern const char* lcd_display_message_fullscreen_P(const char *msg);
extern void lcd_return_to_status();
extern void lcd_wait_for_click();
extern bool lcd_wait_for_click_delay(uint16_t nDelay);
extern void lcd_show_fullscreen_message_and_wait_P(const char *msg);
// 0: no, 1: yes, -1: timeouted
extern int8_t lcd_show_yes_no_and_wait(bool allow_timeouting = true, bool default_yes = false);
// 0: no, 1: yes, -1: timeouted
extern int8_t lcd_show_fullscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting = true, bool default_yes = false);
extern int8_t lcd_show_multiscreen_message_two_choices_and_wait_P(const char *msg, bool allow_timeouting, bool default_yes,
const char *first_choice, const char *second_choice);
extern int8_t lcd_show_multiscreen_message_yes_no_and_wait_P(const char *msg, bool allow_timeouting = true, bool default_yes = false);
// Ask the user to move the Z axis up to the end stoppers and let
// the user confirm that it has been done.
#ifndef TMC2130
extern bool lcd_calibrate_z_end_stop_manual(bool only_z);
#endif
// Show the result of the calibration process on the LCD screen.
extern void lcd_bed_calibration_show_result(BedSkewOffsetDetectionResultType result, uint8_t point_too_far_mask);
extern void lcd_diag_show_end_stops();
#define LCD_MESSAGEPGM(x) lcd_setstatuspgm(PSTR(x))
#define LCD_ALERTMESSAGEPGM(x) lcd_setalertstatuspgm(PSTR(x))
#define LCD_MESSAGERPGM(x) lcd_setstatuspgm((x))
#define LCD_ALERTMESSAGERPGM(x) lcd_setalertstatuspgm((x))
// To be used in lcd_commands_type.
enum class LcdCommands : uint_least8_t
{
Idle,
LoadFilament,
StopPrint,
FarmModeConfirm,
LongPause,
PidExtruder,
Layer1Cal,
};
extern LcdCommands lcd_commands_type;
extern int8_t FSensorStateMenu;
enum class CustomMsg : uint_least8_t
{
Status, //!< status message from lcd_status_message variable
MeshBedLeveling, //!< Mesh bed leveling in progress
FilamentLoading, //!< Loading filament in progress
PidCal, //!< PID tuning in progress
TempCal, //!< PINDA temperature calibration
TempCompPreheat, //!< Temperature compensation preheat
M0Wait, //!< M0/M1 Wait command working even from SD
M117, //!< M117 Set the status line message on the LCD
Resuming, //!< Resuming message
};
extern CustomMsg custom_message_type;
extern uint8_t custom_message_state;
extern uint8_t farm_mode;
extern bool UserECoolEnabled();
extern bool FarmOrUserECool();
#ifdef TMC2130
#define SILENT_MODE_NORMAL 0
#define SILENT_MODE_STEALTH 1
#define SILENT_MODE_OFF SILENT_MODE_NORMAL
#else
#define SILENT_MODE_POWER 0
#define SILENT_MODE_SILENT 1
#define SILENT_MODE_AUTO 2
#define SILENT_MODE_OFF SILENT_MODE_POWER
#endif
#ifdef IR_SENSOR_ANALOG
extern bool bMenuFSDetect;
void printf_IRSensorAnalogBoardChange();
#endif //IR_SENSOR_ANALOG
extern int8_t SilentModeMenu;
extern uint8_t SilentModeMenu_MMU;
extern bool cancel_heatup;
extern bool isPrintPaused;
extern uint8_t scrollstuff;
void lcd_ignore_click(bool b=true);
void lcd_commands();
extern bool bSettings; // flag (i.e. 'fake parameter') for 'lcd_hw_setup_menu()' function
void lcd_hw_setup_menu(void); // NOT static due to using inside "util" module ("nozzle_diameter_check()")
enum class FilamentAction : uint_least8_t
{
None, //!< 'none' state is used as flag for (filament) autoLoad (i.e. opposite for 'autoLoad' state)
Load,
AutoLoad,
UnLoad,
MmuLoad,
MmuUnLoad,
MmuEject,
MmuCut,
Preheat,
Lay1Cal,
};
extern FilamentAction eFilamentAction;
extern bool bFilamentFirstRun;
extern bool bFilamentPreheatState;
extern bool bFilamentAction;
void mFilamentItem(uint16_t nTemp,uint16_t nTempBed);
void mFilamentItemForce();
void lcd_generic_preheat_menu();
void unload_filament(bool automatic = false);
void lcd_printer_connected();
void lcd_ping();
void lcd_wait_for_heater();
void lcd_wait_for_cool_down();
void lcd_move_e(); // NOT static due to usage in Marlin_main
void lcd_temp_cal_show_result(bool result);
#ifdef PINDA_THERMISTOR
bool lcd_wait_for_pinda(float temp);
#endif //PINDA_THERMISTOR
char reset_menu();
uint8_t choose_menu_P(const char *header, const char *item, const char *last_item = nullptr);
void lcd_calibrate_pinda();
void lcd_temp_calibration_set();
#if (LANG_MODE != 0)
void lcd_language();
#endif
void lcd_wizard();
bool lcd_autoDepleteEnabled();
//! @brief Wizard state
enum class WizState : uint8_t
{
Run, //!< run wizard? Main entry point.
Restore, //!< restore calibration status
Selftest, //!< self test
Xyz, //!< xyz calibration
Z, //!< z calibration
IsFil, //!< Is filament loaded? First step of 1st layer calibration
PreheatPla, //!< waiting for preheat nozzle for PLA
Preheat, //!< Preheat for any material
LoadFilCold, //!< Load filament for MMU
LoadFilHot, //!< Load filament without MMU
IsPla, //!< Is PLA filament?
Lay1CalCold, //!< First layer calibration, temperature not selected yet
Lay1CalHot, //!< First layer calibration, temperature already selected
RepeatLay1Cal, //!< Repeat first layer calibration?
Finish, //!< Deactivate wizard
};
void lcd_wizard(WizState state);
extern void lcd_experimental_toggle();
extern void lcd_experimental_menu();
#ifdef PINDA_TEMP_COMP
extern void lcd_pinda_temp_compensation_toggle();
#endif //PINDA_TEMP_COMP
#endif //ULTRALCD_H
Reference in New Issue View Git Blame Copy Permalink