| .. |
|
variants
|
Add ASA preheat.
|
2019-08-15 17:46:29 +02:00 |
|
adc.c
|
Fix PFW644 - MK25 reports stopped, arduino 1.8.5.
|
2018-11-03 22:44:42 +01:00 |
|
adc.h
|
Fix ADC index overflow
|
2018-07-17 17:55:04 +02:00 |
|
AutoDeplete.cpp
|
Comment.
|
2019-01-04 19:56:15 +01:00 |
|
AutoDeplete.h
|
Add filament auto deplete engine for multi-material prints with MMUv2.
|
2019-01-03 22:58:25 +01:00 |
|
BlinkM.cpp
|
|
|
|
BlinkM.h
|
|
|
|
boards.h
|
|
|
|
bootapp.c
|
New lang, arduino 1.8.5 - boot_app debug output
|
2018-10-18 16:20:14 +02:00 |
|
bootapp.h
|
New lang, arduino 1.8.5 - boot_app debug output
|
2018-10-18 16:20:14 +02:00 |
|
cardreader.cpp
|
recovery from "Stop()"
|
2019-05-18 21:28:59 +02:00 |
|
cardreader.h
|
recovery from "Stop()"
|
2019-05-18 21:28:59 +02:00 |
|
cmdqueue.cpp
|
Fix cmdqueue_dump_to_serial.
|
2019-08-23 16:48:30 +02:00 |
|
cmdqueue.h
|
Fix repeated power panic restarted print from beginning or jumped at most 65536 B back in file printed from SD card.
|
2019-08-23 19:30:20 +02:00 |
|
config.h
|
Decrease flash reserved for secondary language.
|
2019-05-14 16:10:04 +02:00 |
|
Configuration_adv.h
|
LCD menu optimalization - lcd and menu
|
2018-07-16 02:13:52 +02:00 |
|
Configuration.cpp
|
some improvements
|
2019-07-10 16:29:40 +02:00 |
|
Configuration.h
|
Increase version to 3.8.0-RC2 and build number to 2639.
|
2019-08-26 17:03:18 +02:00 |
|
ConfigurationStore.cpp
|
Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S
|
2019-03-19 21:39:59 +00:00 |
|
ConfigurationStore.h
|
Adding the microstepping resolution for all axis to the eprom config which is persisted during M500 for Mk3 and Mk3S
|
2019-03-19 21:39:59 +00:00 |
|
conv2str.cpp
|
LCD menu optimalization - conversion functions - source separation
|
2018-07-16 17:23:35 +02:00 |
|
conv2str.h
|
LCD menu optimalization - conversion functions - source separation
|
2018-07-16 17:23:35 +02:00 |
|
Dcodes.cpp
|
MK2.5 - watchdog enabled + test (command "D-1")
|
2019-04-29 13:19:59 +02:00 |
|
Dcodes.h
|
Merge branch 'MK25' into MK3
|
2018-03-13 20:43:19 +01:00 |
|
doxyfile
|
Updated doxygen docs to work better with confluence.
|
2019-07-19 13:51:55 +02:00 |
|
eeprom.cpp
|
Migrate old vale of EEPROM_BABYSTEP_Z only if active sheet is not initialized.
|
2019-08-29 18:07:49 +02:00 |
|
eeprom.h
|
Document
|
2019-08-29 18:26:24 +02:00 |
|
fastio.h
|
|
|
|
Firmware.ino
|
LCD menu optimalization - LiquidCrystal_Prusa removed
|
2018-07-16 23:23:15 +02:00 |
|
first_lay_cal.cpp
|
Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved.
|
2019-08-16 20:47:55 +02:00 |
|
first_lay_cal.h
|
Split first layer calibration load filament and intro line into separate steps. If load fails, pause print apparently flushes command buffer and intro line is not printed after issue is resolved.
|
2019-08-16 20:47:55 +02:00 |
|
fsensor.cpp
|
Partially revert "aeed49a Fix filament runout on optical filament sensors"
|
2019-07-15 17:22:39 +02:00 |
|
fsensor.h
|
remove function forward decl: fsensor_restore_print_and_continue_IR
|
2019-06-05 18:34:10 +02:00 |
|
heatbed_pwm.cpp
|
Improve performance of bed PWM automaton - proof of concept
|
2019-08-14 17:53:08 +02:00 |
|
io_atmega2560.h
|
"disable_z()" for Delta PSU II
|
2019-03-25 23:28:25 +01:00 |
|
language.c
|
Fix warning: assignment makes pointer from integer without a cast.
|
2019-03-05 16:27:47 +01:00 |
|
language.h
|
New lang - fixed french langcode and comparsion in lang-clean script
|
2018-10-25 18:16:36 +02:00 |
|
lcd.cpp
|
Fix shifted languages. Use \n and \x0a
|
2019-07-26 18:53:08 +03:00 |
|
lcd.h
|
Fix status screen
|
2019-07-16 21:11:27 +03:00 |
|
le.sh
|
make all shell scripts executable
|
2018-12-10 07:09:03 -07:00 |
|
Marlin_main.cpp
|
Update documentation.
|
2019-08-26 17:19:57 +02:00 |
|
Marlin.h
|
Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup.
|
2019-08-29 17:21:08 +02:00 |
|
MarlinSerial.cpp
|
Optimized LiquidCrystal class
|
2018-06-08 14:35:47 +02:00 |
|
MarlinSerial.h
|
More than 7.5KB saved by slight refactoring of printing to serial line
|
2019-07-12 10:10:56 +02:00 |
|
menu.cpp
|
variables to PROGMEM, text formating
|
2019-07-23 11:31:20 +02:00 |
|
menu.h
|
sheet menu
|
2019-07-19 18:34:46 +02:00 |
|
mesh_bed_calibration.cpp
|
Code size reduced by almost 5KB
|
2019-08-21 09:59:51 +02:00 |
|
mesh_bed_calibration.h
|
Mesh by 3d-gussner, fixed difference between mbl points coordinates and coordinates used in planner for corrections, mbl settings menu update
|
2019-03-14 01:52:44 +01:00 |
|
mesh_bed_leveling.cpp
|
7x7 points mesh bed leveling
|
2019-02-14 10:57:58 +02:00 |
|
mesh_bed_leveling.h
|
|
|
|
messages.c
|
Merge branch 'MK3' into octoprint_fix
|
2019-07-17 20:06:06 +02:00 |
|
messages.h
|
Merge branch 'MK3' into octoprint_fix
|
2019-07-17 20:06:06 +02:00 |
|
mmu.cpp
|
Code size reduced by almost 5KB
|
2019-08-21 09:59:51 +02:00 |
|
mmu.h
|
sketch/menu.h:90:115: warning: invalid conversion from 'void (*)(int)' to 'void (*)(uint8_t) {aka void (*)(unsigned char)}' [-fpermissive]
|
2019-05-14 18:25:43 +02:00 |
|
motion_control.cpp
|
|
|
|
motion_control.h
|
|
|
|
optiboot_w25x20cl.cpp
|
Do not kill printer if External SPI flash W25X20CL is not responding.
|
2019-04-16 22:20:53 +02:00 |
|
optiboot_w25x20cl.h
|
Added support for a secondary boot loader, based on the OptiBoot project,
|
2018-06-14 15:13:21 +02:00 |
|
pat9125.c
|
Fix compiler warning arduino-1.6.9/hardware/tools/avr/avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>." [-Wcpp]
|
2018-07-23 18:12:08 +02:00 |
|
pat9125.h
|
PAT9125 optimalization (rewrited to C, 8bit sampling)
|
2018-07-12 18:11:07 +02:00 |
|
pins_Einsy_1_0.h
|
Revert changes to pins_Einsy_1_0.h not related to the fan check error
|
2019-06-03 09:02:27 +02:00 |
|
pins_Rambo_1_0.h
|
MK2.5 IR_SENSOR_PIN modified
|
2019-02-11 14:32:21 +01:00 |
|
pins_Rambo_1_3.h
|
debug gcodes (fans, bed analysis) moved to Dcodes, HOST_KEEPALIVE_FEATURE simplified
|
2019-03-06 19:56:48 +01:00 |
|
pins.h
|
Fix compiler warnings macro redefined.
|
2019-03-05 15:56:20 +01:00 |
|
planner.cpp
|
Code size reduced by almost 5KB
|
2019-08-21 09:59:51 +02:00 |
|
planner.h
|
Code size reduced by almost 5KB
|
2019-08-21 09:59:51 +02:00 |
|
printers.h
|
Remove commented out defines.
|
2019-07-10 17:40:33 +02:00 |
|
qr_solve.cpp
|
|
|
|
qr_solve.h
|
|
|
|
rbuf.c
|
T-codes for MMU_V2: initial version
|
2018-07-09 13:57:36 +02:00 |
|
rbuf.h
|
T-codes for MMU_V2: initial version
|
2018-07-09 13:57:36 +02:00 |
|
Sd2Card.cpp
|
Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation.
|
2019-01-27 22:48:51 +01:00 |
|
Sd2Card.h
|
|
|
|
Sd2PinMap.h
|
|
|
|
SdBaseFile.cpp
|
|
|
|
SdBaseFile.h
|
|
|
|
SdFatConfig.h
|
|
|
|
SdFatStructs.h
|
|
|
|
SdFatUtil.cpp
|
Fix compiler warning: sketch/SdFatUtil.cpp:49:7: warning: unused variable 'i' [-Wunused-variable]
|
2018-07-25 15:19:10 +02:00 |
|
SdFatUtil.h
|
|
|
|
SdFile.cpp
|
|
|
|
SdFile.h
|
Optimized LiquidCrystal class
|
2018-06-08 14:35:47 +02:00 |
|
SdInfo.h
|
|
|
|
SdVolume.cpp
|
|
|
|
SdVolume.h
|
|
|
|
Servo.cpp
|
|
|
|
Servo.h
|
|
|
|
sm4.c
|
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
|
2018-10-08 15:58:49 +02:00 |
|
sm4.h
|
New XYZ calibration with image processing
|
2018-03-13 12:55:35 +01:00 |
|
sound.cpp
|
blind alert sound shorter
|
2019-08-05 12:41:27 +02:00 |
|
sound.h
|
small text edits
|
2019-07-15 11:41:16 +02:00 |
|
speed_lookuptable.h
|
|
|
|
spi.c
|
New SPI (do not use Arduino SPI class)
|
2018-03-29 17:42:41 +02:00 |
|
spi.h
|
New ML support - W25X20CL external spi flash support
|
2018-06-08 00:20:28 +02:00 |
|
static_assert.h
|
static_assert - portable solution compatible with C++98
|
2018-09-27 19:59:29 +02:00 |
|
stepper.cpp
|
Merge pull request #1664 from MRprusa3d/PFW-811
|
2019-07-16 16:46:34 +02:00 |
|
stepper.h
|
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
|
2018-10-08 15:58:49 +02:00 |
|
stk500.h
|
Added support for a secondary boot loader, based on the OptiBoot project,
|
2018-06-14 15:13:21 +02:00 |
|
swi2c.c
|
Fix compiler warning arduino-1.6.9/hardware/tools/avr/avr/include/avr/delay.h:36:2: warning: #warning "This file has been moved to <util/delay.h>." [-Wcpp]
|
2018-07-23 13:47:15 +02:00 |
|
swi2c.h
|
SWI2C for PAT9125 simplified/optimized
|
2018-07-12 17:55:38 +02:00 |
|
swspi.cpp
|
|
|
|
swspi.h
|
|
|
|
system_timer.h
|
heatbed audible noise suppression using short fast PWM pulses with
|
2019-07-08 16:42:21 +02:00 |
|
temperature.cpp
|
fixed redundant OK messages in serial
|
2019-07-24 18:08:14 +02:00 |
|
temperature.h
|
Document
|
2019-07-15 19:15:15 +02:00 |
|
thermistortables.h
|
New ML support - menu tunning, startup
|
2018-06-10 16:04:32 +02:00 |
|
timer02.c
|
Improve performance of bed PWM automaton - proof of concept
|
2019-08-14 17:53:08 +02:00 |
|
timer02.h
|
heatbed audible noise suppression using short fast PWM pulses with
|
2019-07-08 16:42:21 +02:00 |
|
Timer.cpp
|
Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2.
|
2019-01-28 19:29:31 +01:00 |
|
Timer.h
|
Store timer period in TimerRemaining.
|
2018-06-11 23:41:36 +02:00 |
|
TimerRemaining.h
|
Fix Timer_test broken by conditional translation for SYSTEM_TIMER_2.
|
2019-01-28 19:29:31 +01:00 |
|
tmc2130.cpp
|
Fix compiler warnings
|
2019-07-16 17:31:56 +02:00 |
|
tmc2130.h
|
Fix compiler warnings
|
2019-07-16 17:31:56 +02:00 |
|
uart2.c
|
Merge remote-tracking branch 'prusa3d/MK3_dev' into simplify_EEPROM_M500
|
2018-10-08 15:58:49 +02:00 |
|
uart2.h
|
MMU - communication, check after start, code cleaning
|
2018-08-07 20:37:59 +02:00 |
|
ultralcd.cpp
|
Increase number of configurable steel sheets to 8. Move sheets into sub menu of HW setup.
|
2019-08-29 17:21:08 +02:00 |
|
ultralcd.h
|
Refactor
|
2019-08-20 17:22:27 +02:00 |
|
uni_avr_rpi.h
|
Revert "Revert "Save 80B of flash and 8B of RAM and fix compiler warning:""
|
2018-07-23 13:35:38 +02:00 |
|
util.cpp
|
farm mode update, documentation correction
|
2019-08-05 17:51:26 +02:00 |
|
util.h
|
pre-production version ;-)
|
2019-07-09 12:16:51 +02:00 |
|
vector_3.cpp
|
|
|
|
vector_3.h
|
|
|
|
w25x20cl.c
|
Added support for a secondary boot loader, based on the OptiBoot project,
|
2018-06-14 15:13:21 +02:00 |
|
w25x20cl.h
|
Added support for a secondary boot loader, based on the OptiBoot project,
|
2018-06-14 15:13:21 +02:00 |
|
xyzcal.cpp
|
Conditional translation for SYSTEM_TIMER_2 because we want to have posibility to switch between old/new implementation.
|
2019-01-27 22:48:51 +01:00 |
|
xyzcal.h
|
XYZ calibration - accuracy improvement
|
2018-03-27 17:27:41 +02:00 |
