3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e79e15b12f
Prusa-Firmware/lang/po/Firmware_hr.po
Yuri D'Elia 0d7680dbf7
New PO-based language translation support (#3471) 
* lang: Add a PO language extractor with FW metadata support

Implement a straight-to-po language extractor which supports our custom
language requirements:

- _i/_I/ISTR for text string definitions
- _T for catalog translations (with back-reference support)
- //// EOL comments with:
  - MSG_ catalog entry name identifiers
  - c=X r=Y annotations for screen dimensioning checks
- Crude support for commented lines

All source locations are correctly referenced in the PO, with the
metadata colleted in the comment for further processing.

Several checks are implemented already during extraction:

- Correct catalog name assignment (no duplicates)
- Metadata checks for each entry

Further checks will be implemented by directly checking the translated PO file.

Requires "polib" and "regex" python modules.

* lang: Adapt lang-check to work directly on PO/POT files

* lang: Allow lang-extract to generate stable (pre-sorted) output directly

* lang: Further extend lang-extract consistency/error checking

- Do not parse inside preprocessor conditionals
- Distinguish between references and definitions
- Warn about missing references and definitions

* lang: lang-extract: warn about incorrect PROGMEM assignments

Check that ISTR is used along with PROGMEM_I1 in an attempt to spot
useless translated catalogs.

* lang: lang-extract: Improved handling of same-line translations

Correctly reference metadata on same-line translations.

* lang: lang-extract: Handle _O as a cat-ref

https://github.com/prusa3d/Prusa-Firmware/pull/3434

* lang: lang-extract: Warn about unused catalog definitions

* lang: lang-extract: Allow propagating translation comments via //

The definition:

    code //// definition [// comment]

will check [definition] as before, but blindly accumulate // comment.
The comment is then re-appended back into the PO files for translators
with the form:

    definition
    comment
    comment...

* lang: Fix incorrect display definitions

* lang: lang-extract: Check source encoding/charmap

* lang: Translate the degree symbol

* lang: Unbreak/cleanup DEBUG_SEC_LANG

* lang: Improve meaning of comment

* lang: Split charset conversions into an aux lib for future use

* lang: Implement lang-map.py to extract the translation symbol map

- Extracts the translatable symbol map for further use
- Computes a stable "language signature" from the map itself
- Optionally patches the binary update the symbols

* lang: Check for translation recoding problems

* lang: Implement a transliteration map to post-process translations

TRANS_CHARS is now used to replace unavailable symbols to the source
encoding, only while producing the language catalog.

* lang: Handle/check character replacements in lang-check

Filter the translation through TRANS_CHARS, so that the preview and
length check are performed correctly for expanding replacements such as
'ß' to 'ss'.

* lang: Implement lang-build.py to generate the final language catalog

* Cleanup .gitignore

* lang: Drop txt language files

* lang: Remove outdated translation scripts and obsolete docs

* lang: Update build scripts for new infrastructure

* lang: [no] Integrate accents from po/new/no.po

We now support accents natively

* lang: Remove redundant directory po/new/

* lang: Fix encoding of LCD characters in PO files

* lang: [hr] Fix wrapping in MSG_CRASH_DET_ONLY_IN_NORMAL

* lang: Sort and reformat PO files for further massaging

* lang: Switch to developer (dot) comments for PO metadata

* lang: Allow the IGNORE annotation to skip extraction

* lang: Fix missing/broken language metadata in sources

* lang: Add update-pot.sh and regenerate po/Firmware.pot

* lang: Add update-po.sh and refresh all PO files

* lang: Add summary documentation about the new translation workflow

* Add more ignored files

* CI: Add new required dependencies to travis

* lang: lang-build: Improve warning message

"referenced" was really meaning that data is being duplicated.

* lang: Respect the language order as defined in config.sh

This correctly splits normal and community-made entries during language
selection.

* lang: More typos in the documentation

* lang: Check for the maximum size of each language

Each table needs to fit within LANG_SIZE_RESERVED

* lang: Properly align _SEC_LANG to page boundaries

... instead of relying on _SEC_LANG_TABLE to calculate the offset

* lang: Build support for dual-language hex files

Detect the printer type by checking the current variant type.

On printers with no xflash (MK2*), generate one hex file for each
additional language file by patching the built-in secondary language
table during the build process

* lang: Mention lang-patchsec.py

* lang: Use color() instead of tput for clarity

* lang: Allow disabling terminal colors with NO_COLOR/TERM=dumb

* lang: Consistent use of redirection in config.sh

* lang: Stricter variant-type check for xflash support

* lang: Output size stats when building double-language hex files

* lang: Respect NO_COLOR in lang-check.py

* lang: Check for repeated/incorrect annotations

Catch errors such as "c=1 c=2"

* lang: Correct MSG_SLIGHT_SKEW/MSG_SEVERE_SKEW annotations

* lang: [it] Improve MSG_*_SKEW translation

* lang: Use INTLHEX instead of OUTHEX_P/S for configuration

We already have OUTHEX which is the compiled firmware.

Use INTLHEX for the final internationalized firmware, which is less
confusing. Also, assume it being a prefix for all generated hex
files, which reduces the number of variables set.

* lang: Move lang_map to lib.io for further use

* lang: lang-check: Accept a firmware map file to suppress unused string warnings

* lang: Use the map file to reduce useless warnings during fw-build

* lang: lang-check: Also suppress unused empty annotations

* lang: Fix MSG_MOVE_CARRIAGE_TO_THE_TOP_Z annotation

Refresh pot file

* lang: lang-check: Do not warn about same-word translations by default

Do not warn when one-word translations such as "No" result in "No" also
in other languages, since this is common in latin languages.

Allow to re-enable the warning with --warn-same

* lang: lang-build: Handle same-source/translation efficiently

* lang: [it] Explicitly add On/Off/Reset/Wizard to suppress warnings

Instead of displaying a warning, supress the warning and explicitly
translate each entry using english (which is the common/acceptable
word in these cases).

* lang: [it] Suppress more warnings

* lang: lang-check: Add intermediate "suggest" warning category

Warnings in the "suggest" category as shown as [S] as based on pure
speculation from the checking tool, such as the translation being
significantly shorter than the original.

As a result, they can be suppressed with --no-suggest

* lang: Return translation status from lang-check

- 0 if the translation only contains suggestions
- 1 if the translation contains warnings or errors

Check for the exit status in fw-build.sh, but do nothing at the moment
except printing a non-fatal error.

* lang: Remove "trim_trailing_whitespace=false" for po files

PO files got cleaned up/rewritten. We can now ensure they stay
consistent.

* lang: [sv] Re-integrate changes from 70c73cb

* lang: [no] Reintegrate changes from @pkg2000
2022-06-16 15:03:30 +02:00

2331 lines
68 KiB
Plaintext
Raw Blame History

# Translation of Prusa-Firmware into Croatian.
#
msgid ""
msgstr ""
"Project-Id-Version: Prusa-Firmware\n"
"POT-Creation-Date: Wed 16 Mar 2022 09:25:10 AM CET\n"
"PO-Revision-Date: Wed 16 Mar 2022 09:25:10 AM CET\n"
"Last-Translator: \n"
"Language-Team: \n"
"Language: hr\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.0.7\n"
"X-Poedit-SourceCharset: UTF-8\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
#. MSG_IR_03_OR_OLDER c=18
#: ../../Firmware/fsensor.cpp:178 ../../Firmware/messages.c:166
msgid " 0.3 or older"
msgstr " 0.3 ili stariji"
#. MSG_IR_04_OR_NEWER c=18
#: ../../Firmware/fsensor.cpp:180 ../../Firmware/messages.c:165
msgid " 0.4 or newer"
msgstr " 0.4 ili noviji"
#. MSG_FACTOR
#: ../../Firmware/ultralcd.cpp:6966
msgid " ° Fact"
msgstr ""
#. MSG_MAX
#: ../../Firmware/ultralcd.cpp:6965
msgid " ° Max"
msgstr ""
#. MSG_MIN
#: ../../Firmware/ultralcd.cpp:6964
msgid " ° Min"
msgstr ""
#. MSG_SELFTEST_FS_LEVEL c=20
#: ../../Firmware/ultralcd.cpp:8100
msgid "%s level expected"
msgstr "%s level ocekivan"
#. MSG_CANCEL c=9
#: ../../Firmware/messages.c:20 ../../Firmware/ultralcd.cpp:2279
#: ../../Firmware/ultralcd.cpp:4691
msgid ">Cancel"
msgstr ">Otkazati"
#. MSG_BABYSTEPPING_Z c=15
#. Beware: must include the ':' as its last character
#: ../../Firmware/ultralcd.cpp:3024
msgid "Adjusting Z:"
msgstr "Podesavanje Z:"
#. MSG_SELFTEST_CHECK_ALLCORRECT c=20
#: ../../Firmware/ultralcd.cpp:8395
msgid "All correct"
msgstr "Sve je u redu"
#. MSG_WIZARD_DONE c=20 r=3
#: ../../Firmware/messages.c:120 ../../Firmware/ultralcd.cpp:5031
#: ../../Firmware/ultralcd.cpp:5040
msgid "All is done. Happy printing!"
msgstr "Sve je gotovo. Sretno printanje!"
#. MSG_SORT_ALPHA c=8
#: ../../Firmware/messages.c:143 ../../Firmware/ultralcd.cpp:5264
msgid "Alphabet"
msgstr "Abeceda"
#: ../../Firmware/ultralcd.cpp:5168
msgid "Always"
msgstr ""
#. MSG_AMBIENT c=14
#: ../../Firmware/ultralcd.cpp:1717
msgid "Ambient"
msgstr "Ambijent"
#. MSG_CONFIRM_CARRIAGE_AT_THE_TOP c=20 r=2
#: ../../Firmware/ultralcd.cpp:3347
msgid "Are left and right Z~carriages all up?"
msgstr "Jesu lijevi i desni Z~nosaci podignuti?"
#. MSG_SOUND_BLIND c=7
#: ../../Firmware/messages.c:148 ../../Firmware/ultralcd.cpp:5319
msgid "Assist"
msgstr "Pomoc"
#. MSG_AUTO c=6
#: ../../Firmware/messages.c:162 ../../Firmware/ultralcd.cpp:6931
msgid "Auto"
msgstr ""
#. MSG_ADJUSTZ
#: ../../Firmware/ultralcd.cpp:3150
msgid "Auto adjust Z?"
msgstr ""
#. MSG_AUTO_HOME c=18
#: ../../Firmware/Marlin_main.cpp:3472 ../../Firmware/messages.c:11
#: ../../Firmware/ultralcd.cpp:5760
msgid "Auto home"
msgstr "Pocetna tocka"
#. MSG_AUTO_POWER c=10
#: ../../Firmware/messages.c:107 ../../Firmware/ultralcd.cpp:5224
#: ../../Firmware/ultralcd.cpp:6846
msgid "Auto power"
msgstr "Auto napaj"
#. MSG_AUTOLOAD_FILAMENT c=18
#: ../../Firmware/ultralcd.cpp:6637
msgid "AutoLoad filament"
msgstr "Autopunj filamenta"
#. MSG_AUTOLOADING_ONLY_IF_FSENS_ON c=20 r=4
#: ../../Firmware/ultralcd.cpp:4309
msgid ""
"Autoloading filament available only when filament sensor is turned on..."
msgstr ""
"Automatsko punjenje filamenta moguce je samo kada je sensor filamenta "
"ukljucen.."
#. MSG_AUTOLOADING_ENABLED c=20 r=4
#: ../../Firmware/ultralcd.cpp:2638
msgid ""
"Autoloading filament is active, just press the knob and insert filament..."
msgstr "Auto punjenje fil. je aktivno, pritisnite gumb i umetnite fil.."
#. MSG_SELFTEST_AXIS c=16
#: ../../Firmware/ultralcd.cpp:8079
msgid "Axis"
msgstr "Os"
#. MSG_SELFTEST_AXIS_LENGTH c=20
#: ../../Firmware/ultralcd.cpp:8078
msgid "Axis length"
msgstr "Duljina osi"
#. MSG_BACK c=18
#: ../../Firmware/messages.c:66 ../../Firmware/ultralcd.cpp:2417
#: ../../Firmware/ultralcd.cpp:3103 ../../Firmware/ultralcd.cpp:6928
#: ../../Firmware/ultralcd.cpp:8971
msgid "Back"
msgstr "Vrati"
#. MSG_BED c=13
#: ../../Firmware/Marlin_main.cpp:2155 ../../Firmware/Marlin_main.cpp:5196
#: ../../Firmware/Marlin_main.cpp:5248 ../../Firmware/messages.c:14
#: ../../Firmware/ultralcd.cpp:1715 ../../Firmware/ultralcd.cpp:6790
#: ../../Firmware/ultralcd.cpp:6958
msgid "Bed"
msgstr "Podloga"
#. MSG_BED_HEATING c=20
#: ../../Firmware/Marlin_main.cpp:6700 ../../Firmware/messages.c:16
#: ../../Firmware/ultralcd.cpp:599
msgid "Bed Heating"
msgstr "Podloga se zagrijava"
#. MSG_BED_DONE c=20
#: ../../Firmware/Marlin_main.cpp:6739 ../../Firmware/messages.c:15
#: ../../Firmware/ultralcd.cpp:602
msgid "Bed done"
msgstr "Podloga zagrijana"
#. MSG_BED_CORRECTION_MENU c=18
#: ../../Firmware/ultralcd.cpp:5782
msgid "Bed level correct"
msgstr "Podloga ispravna"
#. MSG_BED_LEVELING_FAILED_POINT_LOW c=20 r=6
#: ../../Firmware/Marlin_main.cpp:2317 ../../Firmware/Marlin_main.cpp:3193
#: ../../Firmware/Marlin_main.cpp:3203
#: ../../Firmware/mesh_bed_calibration.cpp:2862
#: ../../Firmware/mesh_bed_calibration.cpp:2870
#: ../../Firmware/mesh_bed_calibration.cpp:2895 ../../Firmware/messages.c:17
msgid ""
"Bed leveling failed. Sensor didn't trigger. Debris on nozzle? Waiting for "
"reset."
msgstr ""
"Niveliranje podloge nije uspijelo. Senzor aktiviran. Prljavstina na "
"mlaznici? Ceka se resetiranje."
#. MSG_SELFTEST_BEDHEATER c=20
#: ../../Firmware/ultralcd.cpp:8036
msgid "Bed/Heater"
msgstr "Grijac/Podloga"
#. MSG_BELT_STATUS c=18
#: ../../Firmware/messages.c:19 ../../Firmware/ultralcd.cpp:1770
#: ../../Firmware/ultralcd.cpp:2034
msgid "Belt status"
msgstr "Status remena"
#. MSG_BELTTEST c=18
#: ../../Firmware/ultralcd.cpp:5762
msgid "Belt test"
msgstr "Testiranje remena"
#. MSG_RECOVER_PRINT c=20 r=2
#: ../../Firmware/Marlin_main.cpp:1634 ../../Firmware/Marlin_main.cpp:1656
#: ../../Firmware/messages.c:84
msgid "Blackout occurred. Recover print?"
msgstr "Doslo je do gasenja. Oporaviti print?"
#. MSG_BRIGHT c=6
#: ../../Firmware/messages.c:160 ../../Firmware/ultralcd.cpp:6931
msgid "Bright"
msgstr "Svijet"
#. MSG_BRIGHTNESS c=18
#: ../../Firmware/messages.c:156 ../../Firmware/ultralcd.cpp:5710
#: ../../Firmware/ultralcd.cpp:6856
msgid "Brightness"
msgstr "Svjetlina"
#. MSG_CALIBRATE_BED c=18
#: ../../Firmware/ultralcd.cpp:5771
msgid "Calibrate XYZ"
msgstr "Kalibrirajte XYZ"
#. MSG_HOMEYZ c=18
#: ../../Firmware/messages.c:54 ../../Firmware/ultralcd.cpp:5768
#: ../../Firmware/ultralcd.cpp:5773
msgid "Calibrate Z"
msgstr "Kalibrirajte Z"
#. MSG_MOVE_CARRIAGE_TO_THE_TOP c=20 r=8
#: ../../Firmware/ultralcd.cpp:3310
msgid ""
"Calibrating XYZ. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""
"Kalibracija XYZ. Okrenite gumb da pomaknete Z nosac do krajnjih granicnika. "
"Kliknite kada je zavrseno."
#. MSG_CALIBRATE_Z_AUTO c=20 r=2
#: ../../Firmware/Marlin_main.cpp:2273 ../../Firmware/messages.c:21
#: ../../Firmware/ultralcd.cpp:643
msgid "Calibrating Z"
msgstr "Kalibriracija Z"
#. MSG_MOVE_CARRIAGE_TO_THE_TOP_Z c=20 r=8
#: ../../Firmware/ultralcd.cpp:3309
msgid ""
"Calibrating Z. Rotate the knob to move the Z carriage up to the end "
"stoppers. Click when done."
msgstr ""
"Kalibracija Z. Okrenite gumb da pomaknete Z nosac do krajnjih granicnika. "
"Kliknite kada je zavrseno."
#. MSG_CALIBRATING_HOME c=20
#: ../../Firmware/ultralcd.cpp:8397
msgid "Calibrating home"
msgstr "Kalibracija nultocke"
#. MSG_CALIBRATION c=18
#: ../../Firmware/messages.c:70 ../../Firmware/ultralcd.cpp:6648
msgid "Calibration"
msgstr "Kalibriranje"
#. MSG_HOMEYZ_DONE c=20
#: ../../Firmware/ultralcd.cpp:656
msgid "Calibration done"
msgstr "Kalibracija gotova"
#. MSG_SD_REMOVED c=20
#: ../../Firmware/ultralcd.cpp:8844
msgid "Card removed"
msgstr "Kartica je uklonjena"
#. MSG_CNG_SDCARD
#: ../../Firmware/ultralcd.cpp:6597
msgid "Change SD card"
msgstr ""
#. MSG_CHANGE_EXTR c=20
#: ../../Firmware/ultralcd.cpp:6633
msgid "Change extruder"
msgstr ""
#. MSG_FILAMENTCHANGE c=18
#: ../../Firmware/messages.c:45 ../../Firmware/ultralcd.cpp:6555
#: ../../Firmware/ultralcd.cpp:6799
msgid "Change filament"
msgstr "Promijeni filament"
#. MSG_CHANGE_SUCCESS c=20
#: ../../Firmware/ultralcd.cpp:2484
msgid "Change success!"
msgstr "Promijena uspjesna!"
#. MSG_CORRECTLY c=20
#: ../../Firmware/ultralcd.cpp:2552
msgid "Changed correctly?"
msgstr "Ispravno izmjenjeno?"
#. MSG_CHECKING_X c=20
#: ../../Firmware/messages.c:23 ../../Firmware/ultralcd.cpp:7240
#: ../../Firmware/ultralcd.cpp:8387
msgid "Checking X axis"
msgstr "Provjera X osi"
#. MSG_CHECKING_Y c=20
#: ../../Firmware/messages.c:24 ../../Firmware/ultralcd.cpp:7249
#: ../../Firmware/ultralcd.cpp:8388
msgid "Checking Y axis"
msgstr "Provjera Y osi"
#. MSG_SELFTEST_CHECK_Z c=20
#: ../../Firmware/ultralcd.cpp:8389
msgid "Checking Z axis"
msgstr "Provjera Z osi"
#. MSG_SELFTEST_CHECK_BED c=20
#: ../../Firmware/messages.c:96 ../../Firmware/ultralcd.cpp:8390
msgid "Checking bed"
msgstr "Provjera podloge"
#. MSG_SELFTEST_CHECK_ENDSTOPS c=20
#: ../../Firmware/ultralcd.cpp:8386
msgid "Checking endstops"
msgstr "Provjera granicnika"
#. MSG_CHECKING_FILE c=17
#: ../../Firmware/ultralcd.cpp:8485
msgid "Checking file"
msgstr "Provjera datoteke"
#. MSG_SELFTEST_CHECK_HOTEND c=20
#: ../../Firmware/ultralcd.cpp:8392
msgid "Checking hotend"
msgstr "Provjera hotenda"
#. MSG_SELFTEST_CHECK_FSENSOR c=20
#: ../../Firmware/messages.c:97 ../../Firmware/ultralcd.cpp:8393
#: ../../Firmware/ultralcd.cpp:8394
msgid "Checking sensors"
msgstr "Provjera senzora"
#. MSG_CHECKS c=18
#: ../../Firmware/ultralcd.cpp:5625
msgid "Checks"
msgstr "Provjere"
#. MSG_NOT_COLOR c=19
#: ../../Firmware/ultralcd.cpp:2555
msgid "Color not correct"
msgstr "Boja nije ispravna"
#. MSG_COMMUNITY_MADE c=18
#: ../../Firmware/messages.c:25 ../../Firmware/ultralcd.cpp:4489
msgid "Community made"
msgstr "Napravilo zajedno"
#: ../../Firmware/ultralcd.cpp:8619
msgid "Connect printer to"
msgstr ""
#. MSG_CONTINUE_SHORT c=5
#: ../../Firmware/messages.c:154 ../../Firmware/ultralcd.cpp:5564
msgid "Cont."
msgstr "Nast."
#. MSG_COOLDOWN c=18
#: ../../Firmware/messages.c:27 ../../Firmware/ultralcd.cpp:2441
msgid "Cooldown"
msgstr "Ohladi"
#. MSG_COPY_SEL_LANG c=20 r=3
#: ../../Firmware/ultralcd.cpp:4427
msgid "Copy selected language?"
msgstr "Kopirati odabrani jezik?"
#. MSG_CRASH c=7
#: ../../Firmware/messages.c:28 ../../Firmware/ultralcd.cpp:1533
#: ../../Firmware/ultralcd.cpp:1574 ../../Firmware/ultralcd.cpp:1584
msgid "Crash"
msgstr "Udar"
#. MSG_CRASHDETECT c=13
#: ../../Firmware/messages.c:30 ../../Firmware/ultralcd.cpp:5201
#: ../../Firmware/ultralcd.cpp:5202 ../../Firmware/ultralcd.cpp:5204
#: ../../Firmware/ultralcd.cpp:6836 ../../Firmware/ultralcd.cpp:6837
#: ../../Firmware/ultralcd.cpp:6839
msgid "Crash det."
msgstr "Udar detekti."
#. MSG_CRASH_DETECTED c=20
#: ../../Firmware/Marlin_main.cpp:645 ../../Firmware/messages.c:29
msgid "Crash detected."
msgstr "Udar otkriven."
#. MSG_CRASH_RESUME c=20 r=3
#: ../../Firmware/Marlin_main.cpp:653
msgid "Crash detected. Resume print?"
msgstr "Otkriven je udar. Nastaviti print?"
#. MSG_CRASH_DET_ONLY_IN_NORMAL c=20 r=4
#: ../../Firmware/ultralcd.cpp:4281
msgid ""
"Crash detection can\n"
"be turned on only in\n"
"Normal mode"
msgstr "Detekcija udarca moze biti ukljuceno samo u Normalnom nacinu rada"
#. MSG_CURRENT c=19
#: ../../Firmware/ultralcd.cpp:5913
msgid "Current"
msgstr ""
#. MSG_CUT_FILAMENT c=17
#: ../../Firmware/messages.c:63 ../../Firmware/ultralcd.cpp:6218
#: ../../Firmware/ultralcd.cpp:6219 ../../Firmware/ultralcd.cpp:6220
#: ../../Firmware/ultralcd.cpp:6221 ../../Firmware/ultralcd.cpp:6222
#: ../../Firmware/ultralcd.cpp:6628
msgid "Cut filament"
msgstr "Odrezite fil."
#. MSG_CUTTER c=9
#: ../../Firmware/messages.c:130 ../../Firmware/ultralcd.cpp:5163
#: ../../Firmware/ultralcd.cpp:5168 ../../Firmware/ultralcd.cpp:5173
msgid "Cutter"
msgstr "Rezac"
#. MSG_MMU_CUTTING_FIL c=18
#: ../../Firmware/mmu.cpp:1387
msgid "Cutting filament"
msgstr "Rezanje filamenta"
#. MSG_DATE c=17
#: ../../Firmware/ultralcd.cpp:1975
msgid "Date:"
msgstr "Datum:"
#. MSG_DIM c=6
#: ../../Firmware/messages.c:161 ../../Firmware/ultralcd.cpp:6931
msgid "Dim"
msgstr "Tamno"
#. MSG_DISABLE_STEPPERS c=18
#: ../../Firmware/ultralcd.cpp:5662
msgid "Disable steppers"
msgstr "Onemoguci stepere"
#. MSG_BABYSTEP_Z_NOT_SET c=20 r=12
#: ../../Firmware/Marlin_main.cpp:1579 ../../Firmware/Marlin_main.cpp:3612
#: ../../Firmware/messages.c:13
msgid ""
"Distance between tip of the nozzle and the bed surface has not been set yet. "
"Please follow the manual, chapter First steps, section First layer "
"calibration."
msgstr ""
"Udaljenost izmedu vrha mlaznice i povrsine lezista jos nije postavljena. "
"Molimo slijedite prirucnik, poglavlje Prvi koraci, odjeljak Kalibracija "
"prvog sloja."
#. MSG_WIZARD_REPEAT_V2_CAL c=20 r=7
#: ../../Firmware/ultralcd.cpp:5005
msgid ""
"Do you want to repeat last step to readjust distance between nozzle and "
"heatbed?"
msgstr ""
"Zelite li ponoviti zadnji korak za ponovno podesavanje udaljenosti izmedu "
"mlaznice i grijace podloge?"
#: ../../Firmware/mmu.cpp:872
msgid "Do you want to switch extruder?"
msgstr ""
#. MSG_CLEAN_NOZZLE_E c=20 r=8
#: ../../Firmware/ultralcd.cpp:4607
msgid "E calibration finished. Please clean the nozzle. Click when done."
msgstr ""
#. MSG_EXTRUDER_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:5074
msgid "E-correct:"
msgstr "E-ispravan:"
#. MSG_ERROR c=10
#: ../../Firmware/messages.c:31 ../../Firmware/ultralcd.cpp:2616
msgid "ERROR:"
msgstr "POGRESKA:"
#. MSG_FSENS_NOT_RESPONDING c=20 r=4
#: ../../Firmware/ultralcd.cpp:4322
msgid "ERROR: Filament sensor is not responding, please check connection."
msgstr "POGRESKA: Senzor filamenta ne reagira, provjerite vezu."
#. MSG_EJECT_FILAMENT c=17
#: ../../Firmware/messages.c:62 ../../Firmware/ultralcd.cpp:6196
#: ../../Firmware/ultralcd.cpp:6197 ../../Firmware/ultralcd.cpp:6198
#: ../../Firmware/ultralcd.cpp:6199 ../../Firmware/ultralcd.cpp:6200
#: ../../Firmware/ultralcd.cpp:6626
msgid "Eject filament"
msgstr "Izbaci filament"
#. MSG_EJECTING_FILAMENT c=20
#: ../../Firmware/mmu.cpp:1415
msgid "Ejecting filament"
msgstr "Izbacivanje fil."
#. MSG_SELFTEST_ENDSTOP c=16
#: ../../Firmware/ultralcd.cpp:8049
msgid "Endstop"
msgstr "Granicnik"
#. MSG_SELFTEST_ENDSTOP_NOTHIT c=20
#: ../../Firmware/ultralcd.cpp:8054
msgid "Endstop not hit"
msgstr "Granicnik nije aktiv"
#. MSG_SELFTEST_ENDSTOPS c=20
#: ../../Firmware/ultralcd.cpp:8040
msgid "Endstops"
msgstr "Granicnici"
#. MSG_EXTRUDER c=17
#: ../../Firmware/Marlin_main.cpp:8967 ../../Firmware/messages.c:32
#: ../../Firmware/ultralcd.cpp:4228
msgid "Extruder"
msgstr "Ekstruder"
#. MSG_EXTRUDER_1 c=17
#: ../../Firmware/ultralcd.cpp:6260
msgid "Extruder 1"
msgstr ""
#. MSG_EXTRUDER_2 c=17
#: ../../Firmware/ultralcd.cpp:6261
msgid "Extruder 2"
msgstr ""
#. MSG_EXTRUDER_3 c=17
#: ../../Firmware/ultralcd.cpp:6262
msgid "Extruder 3"
msgstr ""
#. MSG_EXTRUDER_4 c=17
#: ../../Firmware/ultralcd.cpp:6263
msgid "Extruder 4"
msgstr ""
#. MSG_EXTRUDER_FAN_SPEED c=16
#: ../../Firmware/messages.c:37 ../../Firmware/ultralcd.cpp:1438
#: ../../Firmware/ultralcd.cpp:8403
msgid "Extruder fan:"
msgstr "Ekstruder vent:"
#. MSG_INFO_EXTRUDER c=18
#: ../../Firmware/ultralcd.cpp:2030
msgid "Extruder info"
msgstr "Info o ekstruderu"
#. MSG_FSENSOR_AUTOLOAD c=13
#: ../../Firmware/messages.c:50 ../../Firmware/ultralcd.cpp:5089
#: ../../Firmware/ultralcd.cpp:5097 ../../Firmware/ultralcd.cpp:5108
#: ../../Firmware/ultralcd.cpp:5110
msgid "F. autoload"
msgstr "F. auto.punj"
#. MSG_FS_ACTION c=10
#: ../../Firmware/messages.c:153 ../../Firmware/ultralcd.cpp:5564
#: ../../Firmware/ultralcd.cpp:5567
msgid "FS Action"
msgstr "FS Akcija"
#. MSG_FS_V_03_OR_OLDER c=18
#: ../../Firmware/Marlin_main.cpp:9927
msgid "FS v0.3 or older"
msgstr "FS v0.3 il stariji"
#. MSG_FS_V_04_OR_NEWER c=18
#: ../../Firmware/Marlin_main.cpp:9919
msgid "FS v0.4 or newer"
msgstr "FS v0.4 ili noviji"
#. MSG_FAIL_STATS c=18
#: ../../Firmware/ultralcd.cpp:6656
msgid "Fail stats"
msgstr "Neuspjesna stat"
#. MSG_MMU_FAIL_STATS c=18
#: ../../Firmware/ultralcd.cpp:6659
msgid "Fail stats MMU"
msgstr "Neuspjes. MMU stat"
#. MSG_FALSE_TRIGGERING c=20
#: ../../Firmware/ultralcd.cpp:8095
msgid "False triggering"
msgstr "Lazno aktiviranje"
#. MSG_FAN_SPEED c=14
#: ../../Firmware/messages.c:36 ../../Firmware/ultralcd.cpp:6792
#: ../../Firmware/ultralcd.cpp:6960
msgid "Fan speed"
msgstr "Brzina vent"
#. MSG_SELFTEST_FAN c=20
#: ../../Firmware/messages.c:93 ../../Firmware/ultralcd.cpp:8207
#: ../../Firmware/ultralcd.cpp:8383 ../../Firmware/ultralcd.cpp:8384
#: ../../Firmware/ultralcd.cpp:8385
msgid "Fan test"
msgstr "Test ventilatora"
#. MSG_FANS_CHECK c=13
#: ../../Firmware/messages.c:33 ../../Firmware/ultralcd.cpp:5671
#: ../../Firmware/ultralcd.cpp:6825
msgid "Fans check"
msgstr "Provjera vent"
#. MSG_FIL_RUNOUTS c=15
#: ../../Firmware/messages.c:34 ../../Firmware/ultralcd.cpp:1532
#: ../../Firmware/ultralcd.cpp:1573 ../../Firmware/ultralcd.cpp:1639
#: ../../Firmware/ultralcd.cpp:1641
msgid "Fil. runouts"
msgstr "Bez filmaneta"
#. MSG_FSENSOR c=12
#: ../../Firmware/messages.c:51 ../../Firmware/ultralcd.cpp:3854
#: ../../Firmware/ultralcd.cpp:5088 ../../Firmware/ultralcd.cpp:5094
#: ../../Firmware/ultralcd.cpp:5104 ../../Firmware/ultralcd.cpp:6806
#: ../../Firmware/ultralcd.cpp:6810 ../../Firmware/ultralcd.cpp:6814
msgid "Fil. sensor"
msgstr "Fil. senzor"
#: ../../Firmware/Marlin_main.cpp:3875 ../../Firmware/Marlin_main.cpp:12123
msgid "Fil. sensor response is poor, disable it?"
msgstr ""
#. MSG_FILAMENT c=17
#: ../../Firmware/Marlin_main.cpp:8936 ../../Firmware/Marlin_main.cpp:8963
#: ../../Firmware/messages.c:35 ../../Firmware/ultralcd.cpp:4691
msgid "Filament"
msgstr ""
#. MSG_FILAMENT_CLEAN c=20 r=2
#: ../../Firmware/messages.c:39 ../../Firmware/ultralcd.cpp:2624
#: ../../Firmware/ultralcd.cpp:2630
msgid "Filament extruding & with correct color?"
msgstr "Ekstrudiranje fil.s sa ispravnom bojom?"
#. MSG_NOT_LOADED c=19
#: ../../Firmware/ultralcd.cpp:2554
msgid "Filament not loaded"
msgstr "Fil. nije napunjen"
#. MSG_SELFTEST_FILAMENT_SENSOR c=17
#: ../../Firmware/messages.c:99 ../../Firmware/ultralcd.cpp:8090
#: ../../Firmware/ultralcd.cpp:8094 ../../Firmware/ultralcd.cpp:8098
#: ../../Firmware/ultralcd.cpp:8412
msgid "Filament sensor"
msgstr "Senzor filamenta"
#. MSG_FILAMENT_USED c=19
#: ../../Firmware/ultralcd.cpp:2703
msgid "Filament used"
msgstr "Iskoristeni fil."
#. MSG_FILE_INCOMPLETE c=20 r=3
#: ../../Firmware/ultralcd.cpp:8539
msgid "File incomplete. Continue anyway?"
msgstr "Datoteka je nepotpuna. Svejedno nastaviti?"
#. MSG_FINISHING_MOVEMENTS c=20
#: ../../Firmware/messages.c:47 ../../Firmware/ultralcd.cpp:6377
#: ../../Firmware/ultralcd.cpp:6697
msgid "Finishing movements"
msgstr "Zavrsni pokreti"
#. MSG_FIRMWARE c=8
#: ../../Firmware/messages.c:172 ../../Firmware/ultralcd.cpp:5474
#: ../../Firmware/ultralcd.cpp:5477 ../../Firmware/ultralcd.cpp:5480
#: ../../Firmware/ultralcd.cpp:5483
msgid "Firmware"
msgstr ""
#. MSG_V2_CALIBRATION c=18
#: ../../Firmware/messages.c:126 ../../Firmware/ultralcd.cpp:5758
#: ../../Firmware/ultralcd.cpp:6482
msgid "First layer cal."
msgstr "Prvi sloj kalib."
#. MSG_WIZARD_SELFTEST c=20 r=8
#: ../../Firmware/ultralcd.cpp:4926
msgid "First, I will run the selftest to check most common assembly problems."
msgstr ""
"Prvo cu pokrenuti samotestiranje kako bih provjerio najcesce probleme sa "
"montazom."
#. MSG_MMU_FIX_ISSUE c=20 r=4
#: ../../Firmware/mmu.cpp:727
msgid "Fix the issue and then press button on MMU unit."
msgstr "Rijesite problem, a zatim pritisnite gumb na MMU jedinici."
#. MSG_TOSHIBA_FLASH_AIR_COMPATIBILITY c=8
#: ../../Firmware/messages.c:173 ../../Firmware/ultralcd.cpp:5255
#: ../../Firmware/ultralcd.cpp:5274
msgid "FlashAir"
msgstr ""
#. MSG_FLOW c=15
#: ../../Firmware/ultralcd.cpp:6793
msgid "Flow"
msgstr "Protok"
#. MSG_SELFTEST_PART_FAN c=20
#: ../../Firmware/messages.c:90 ../../Firmware/ultralcd.cpp:8060
#: ../../Firmware/ultralcd.cpp:8213 ../../Firmware/ultralcd.cpp:8218
msgid "Front print fan?"
msgstr "Prednji print vent?"
#. MSG_BED_CORRECTION_FRONT c=14
#: ../../Firmware/ultralcd.cpp:3106
msgid "Front side[μm]"
msgstr "Prednj str[μm]"
#. MSG_SELFTEST_FANS c=20
#: ../../Firmware/ultralcd.cpp:8084
msgid "Front/left fans"
msgstr "Prednji/lijevi vent"
#. MSG_GCODE_DIFF_CONTINUE c=20 r=4
#: ../../Firmware/util.cpp:414
msgid "G-code sliced for a different level. Continue?"
msgstr "G-kod izrezan za drugu razinu. Nastavite?"
#. MSG_GCODE_DIFF_CANCELLED c=20 r=7
#: ../../Firmware/util.cpp:420
msgid ""
"G-code sliced for a different level. Please re-slice the model again. Print "
"cancelled."
msgstr ""
"G-kod izrezan za drugu razinu. Molimo ponovo izrezite model. Print je "
"otkazan."
#. MSG_GCODE_DIFF_PRINTER_CONTINUE c=20 r=5
#: ../../Firmware/messages.c:136 ../../Firmware/util.cpp:331
#: ../../Firmware/util.cpp:480
msgid "G-code sliced for a different printer type. Continue?"
msgstr "G-kod izrezan za drugu vrstu printera. Nastavite?"
#. MSG_GCODE_DIFF_PRINTER_CANCELLED c=20 r=8
#: ../../Firmware/messages.c:137 ../../Firmware/util.cpp:337
#: ../../Firmware/util.cpp:486
msgid ""
"G-code sliced for a different printer type. Please re-slice the model again. "
"Print cancelled."
msgstr ""
"G-kod izrezan za drugu vrstu printera. Molimo ponovo izrezite model. Print "
"je otkazan."
#. MSG_GCODE_NEWER_FIRMWARE_CONTINUE c=20 r=5
#: ../../Firmware/util.cpp:381
msgid "G-code sliced for a newer firmware. Continue?"
msgstr "G-kod izrezan za noviji firmware. Nastavite?"
#. MSG_GCODE_NEWER_FIRMWARE_CANCELLED c=20 r=8
#: ../../Firmware/util.cpp:387
msgid ""
"G-code sliced for a newer firmware. Please update the firmware. Print "
"cancelled."
msgstr ""
"G-kod izrezan za noviji firmware. Molimo azurirajte firmware. Prime je "
"otkazan."
#. MSG_GCODE c=8
#: ../../Firmware/messages.c:135 ../../Firmware/ultralcd.cpp:5515
#: ../../Firmware/ultralcd.cpp:5518 ../../Firmware/ultralcd.cpp:5521
#: ../../Firmware/ultralcd.cpp:5524
msgid "Gcode"
msgstr ""
#. MSG_HW_SETUP c=18
#: ../../Firmware/messages.c:104 ../../Firmware/ultralcd.cpp:5532
#: ../../Firmware/ultralcd.cpp:5586 ../../Firmware/ultralcd.cpp:5678
msgid "HW Setup"
msgstr "HW podesavanje"
#. MSG_SELFTEST_HEATERTHERMISTOR c=20
#: ../../Firmware/ultralcd.cpp:8032
msgid "Heater/Thermistor"
msgstr "Grijac/Termostat"
#. MSG_HEATING c=20
#: ../../Firmware/Marlin_main.cpp:6640 ../../Firmware/messages.c:52
#: ../../Firmware/ultralcd.cpp:591
msgid "Heating"
msgstr "Grijanje"
#. MSG_BED_HEATING_SAFETY_DISABLED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:9840
msgid "Heating disabled by safety timer."
msgstr "Grijanje je onemoguceno sigurnosnim mjeracem vremena."
#. MSG_HEATING_COMPLETE c=20
#: ../../Firmware/Marlin_main.cpp:6673 ../../Firmware/messages.c:53
#: ../../Firmware/ultralcd.cpp:594
msgid "Heating done."
msgstr "Grijanje obavljeno."
#. MSG_WIZARD_WELCOME_SHIPPING c=20 r=16
#: ../../Firmware/messages.c:124 ../../Firmware/ultralcd.cpp:4902
msgid ""
"Hi, I am your Original Prusa i3 printer. I will guide you through a short "
"setup process, in which the Z-axis will be calibrated. Then, you will be "
"ready to print."
msgstr ""
"Bok, ja sam vas Original Prusa i3 printer. Vodit cu vas kroz kratak proces "
"postavljanja, u kojem ce se kalibrirati Z~os. Tada cete biti spremni za "
"printanje."
#. MSG_WIZARD_WELCOME c=20 r=7
#: ../../Firmware/messages.c:123 ../../Firmware/ultralcd.cpp:4905
msgid ""
"Hi, I am your Original Prusa i3 printer. Would you like me to guide you "
"through the setup process?"
msgstr ""
"Bok, ja sam vas Original Prusa i3 printer. Zelite li da vas vodim kroz "
"postupak postavljanja?"
#. MSG_HIGH_POWER c=10
#: ../../Firmware/messages.c:106 ../../Firmware/ultralcd.cpp:5218
#: ../../Firmware/ultralcd.cpp:5227 ../../Firmware/ultralcd.cpp:6844
#: ../../Firmware/ultralcd.cpp:6847
msgid "High power"
msgstr "Visoka sna"
#. MSG_WIZARD_XYZ_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:4935
msgid "I will run xyz calibration now. It will take approx. 12 mins."
msgstr "Sada cu pokrenuti xyz kalibraciju. Trebat ce cca. 12 min."
#. MSG_WIZARD_Z_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:4943
msgid "I will run z calibration now."
msgstr "Sada cu pokrenuti z kalibraciju."
#. MSG_ADDITIONAL_SHEETS c=20 r=9
#: ../../Firmware/ultralcd.cpp:5013
msgid ""
"If you have additional steel sheets, calibrate their presets in Settings - "
"HW Setup - Steel sheets."
msgstr ""
"Ako imate dodatne celicne ploce, kalibrirajte njihove unaprijed postavljene "
"postavke u Postavke - HW Podesavanje - Celicne ploce."
#. MSG_IMPROVE_BED_OFFSET_AND_SKEW_LINE1 c=60
#: ../../Firmware/mesh_bed_calibration.cpp:2531
msgid "Improving bed calibration point"
msgstr ""
#. MSG_INFO_SCREEN c=18
#: ../../Firmware/messages.c:118 ../../Firmware/ultralcd.cpp:6536
msgid "Info screen"
msgstr "Info zaslon"
#. MSG_INIT_SDCARD
#: ../../Firmware/ultralcd.cpp:6604
msgid "Init. SD card"
msgstr ""
#. MSG_INSERT_FILAMENT c=20
#: ../../Firmware/ultralcd.cpp:2472
msgid "Insert filament"
msgstr "Umetnite filament"
#. MSG_FILAMENT_LOADING_T0 c=20 r=4
#: ../../Firmware/messages.c:41 ../../Firmware/mmu.cpp:976
#: ../../Firmware/mmu.cpp:1020
msgid "Insert filament into extruder 1. Click when done."
msgstr ""
#. MSG_FILAMENT_LOADING_T1 c=20 r=4
#: ../../Firmware/messages.c:42 ../../Firmware/mmu.cpp:973
#: ../../Firmware/mmu.cpp:1017
msgid "Insert filament into extruder 2. Click when done."
msgstr ""
#. MSG_FILAMENT_LOADING_T2 c=20 r=4
#: ../../Firmware/messages.c:43 ../../Firmware/mmu.cpp:974
#: ../../Firmware/mmu.cpp:1018
msgid "Insert filament into extruder 3. Click when done."
msgstr ""
#. MSG_FILAMENT_LOADING_T3 c=20 r=4
#: ../../Firmware/messages.c:44 ../../Firmware/mmu.cpp:975
#: ../../Firmware/mmu.cpp:1019
msgid "Insert filament into extruder 4. Click when done."
msgstr ""
#. MSG_INSERT_FIL c=20 r=6
#: ../../Firmware/ultralcd.cpp:7285
msgid ""
"Insert the filament (do not load it) into the extruder and then press the "
"knob."
msgstr ""
"Umetnite filament (nemojte ga puniti) u ekstruder i zatim pritisnite gumb."
#. MSG_FILAMENT_LOADED c=20 r=2
#: ../../Firmware/messages.c:40 ../../Firmware/ultralcd.cpp:4711
#: ../../Firmware/ultralcd.cpp:4968 ../../Firmware/ultralcd.cpp:4971
msgid "Is filament loaded?"
msgstr "Je li filament napunjen?"
#. MSG_STEEL_SHEET_CHECK c=20 r=2
#: ../../Firmware/Marlin_main.cpp:3513 ../../Firmware/Marlin_main.cpp:5315
#: ../../Firmware/messages.c:111 ../../Firmware/ultralcd.cpp:4944
msgid "Is steel sheet on heatbed?"
msgstr "Je li celicna ploca na grijanoj podlozi?"
#. MSG_ITERATION c=12
#: ../../Firmware/mesh_bed_calibration.cpp:2253 ../../Firmware/messages.c:55
msgid "Iteration"
msgstr "Ponavljanje"
#. MSG_LAST_PRINT c=18
#: ../../Firmware/messages.c:58 ../../Firmware/ultralcd.cpp:1460
#: ../../Firmware/ultralcd.cpp:1608
msgid "Last print"
msgstr "Zadnji print"
#. MSG_LAST_PRINT_FAILURES c=20
#: ../../Firmware/messages.c:59 ../../Firmware/ultralcd.cpp:1481
#: ../../Firmware/ultralcd.cpp:1571 ../../Firmware/ultralcd.cpp:1581
#: ../../Firmware/ultralcd.cpp:1638
msgid "Last print failures"
msgstr "Zadnji neusp. print"
#. MSG_LEFT c=10
#: ../../Firmware/ultralcd.cpp:2834
msgid "Left"
msgstr "Lijevo"
#. MSG_SELFTEST_EXTRUDER_FAN c=20
#: ../../Firmware/messages.c:91 ../../Firmware/ultralcd.cpp:8066
#: ../../Firmware/ultralcd.cpp:8213 ../../Firmware/ultralcd.cpp:8218
msgid "Left hotend fan?"
msgstr "Lijevi hotend vent?"
#. MSG_BED_CORRECTION_LEFT c=14
#: ../../Firmware/ultralcd.cpp:3104
msgid "Left side [μm]"
msgstr "Lijeva str[μm]"
#. MSG_BL_HIGH c=12
#: ../../Firmware/messages.c:157 ../../Firmware/ultralcd.cpp:6929
msgid "Level Bright"
msgstr "Razina svjet"
#. MSG_BL_LOW c=12
#: ../../Firmware/messages.c:158 ../../Firmware/ultralcd.cpp:6930
msgid "Level Dimmed"
msgstr "Razina zatam"
#. MSG_LIN_CORRECTION c=18
#: ../../Firmware/ultralcd.cpp:5686
msgid "Lin. correction"
msgstr "Lin. ispravak"
#. MSG_BABYSTEP_Z c=18
#: ../../Firmware/messages.c:12 ../../Firmware/ultralcd.cpp:5698
#: ../../Firmware/ultralcd.cpp:6551
msgid "Live adjust Z"
msgstr "Live podesavanje Z"
#. MSG_LOAD_ALL c=17
#: ../../Firmware/ultralcd.cpp:6151
msgid "Load all"
msgstr "Napuni sve"
#. MSG_LOAD_FILAMENT c=17
#: ../../Firmware/messages.c:60 ../../Firmware/ultralcd.cpp:6152
#: ../../Firmware/ultralcd.cpp:6153 ../../Firmware/ultralcd.cpp:6154
#: ../../Firmware/ultralcd.cpp:6155 ../../Firmware/ultralcd.cpp:6159
#: ../../Firmware/ultralcd.cpp:6170 ../../Firmware/ultralcd.cpp:6171
#: ../../Firmware/ultralcd.cpp:6172 ../../Firmware/ultralcd.cpp:6173
#: ../../Firmware/ultralcd.cpp:6174 ../../Firmware/ultralcd.cpp:6621
#: ../../Firmware/ultralcd.cpp:6642
msgid "Load filament"
msgstr "Napunite filament"
#. MSG_LOAD_TO_NOZZLE c=18
#: ../../Firmware/ultralcd.cpp:6622
msgid "Load to nozzle"
msgstr "Punjenje u mlazn"
#. MSG_LOADING_COLOR c=20
#: ../../Firmware/ultralcd.cpp:2506
msgid "Loading color"
msgstr "Ucitavanje boje"
#. MSG_LOADING_FILAMENT c=20
#: ../../Firmware/Marlin_main.cpp:3846 ../../Firmware/messages.c:61
#: ../../Firmware/mmu.cpp:882 ../../Firmware/mmu.cpp:995
#: ../../Firmware/mmu.cpp:1036 ../../Firmware/mmu.cpp:1037
#: ../../Firmware/mmu.cpp:1353 ../../Firmware/mmu.cpp:1365
#: ../../Firmware/ultralcd.cpp:2517 ../../Firmware/ultralcd.cpp:4806
msgid "Loading filament"
msgstr "Punjenje filamenta"
#. MSG_LOOSE_PULLEY c=20
#: ../../Firmware/ultralcd.cpp:8072
msgid "Loose pulley"
msgstr "Labava remenica"
#. MSG_SOUND_LOUD c=7
#: ../../Firmware/messages.c:146 ../../Firmware/ultralcd.cpp:5310
#: ../../Firmware/ultralcd.cpp:5322
msgid "Loud"
msgstr "Glasno"
#. MSG_M117_V2_CALIBRATION c=25
#: ../../Firmware/first_lay_cal.cpp:28 ../../Firmware/messages.c:64
#: ../../Firmware/ultralcd.cpp:932
msgid "M117 First layer cal."
msgstr "M117 Prvi sloj kal."
#. MSG_MK3_FIRMWARE_ON_MK3S c=20 r=4
#: ../../Firmware/Marlin_main.cpp:884
msgid "MK3 firmware detected on MK3S printer"
msgstr "MK3 firmware otkriven na MK3S printeru"
#. MSG_MK3S_FIRMWARE_ON_MK3 c=20 r=4
#: ../../Firmware/Marlin_main.cpp:877
msgid "MK3S firmware detected on MK3 printer"
msgstr "MK3S firmware detektiran na MK3 printeru"
#. MSG_MMU_MODE c=8
#: ../../Firmware/messages.c:139 ../../Firmware/ultralcd.cpp:5241
#: ../../Firmware/ultralcd.cpp:5242
msgid "MMU Mode"
msgstr "MMU Mod"
#. MSG_MMU_OK_RESUMING_POSITION c=20 r=4
#: ../../Firmware/mmu.cpp:765
msgid "MMU OK. Resuming position..."
msgstr "MMU OK. Nastavak pozicije..."
#. MSG_MMU_OK_RESUMING_TEMPERATURE c=20 r=4
#: ../../Firmware/mmu.cpp:758
msgid "MMU OK. Resuming temperature..."
msgstr "MMU OK. Nastavak temperature..."
#. MSG_MMU_OK_RESUMING c=20 r=4
#: ../../Firmware/mmu.cpp:776
msgid "MMU OK. Resuming..."
msgstr "MMU OK. Nastavak..."
#. MSG_MMU_FAILS c=15
#: ../../Firmware/messages.c:71 ../../Firmware/ultralcd.cpp:1482
#: ../../Firmware/ultralcd.cpp:1505
msgid "MMU fails"
msgstr "MMU ne uspijeva"
#. MSG_MMU_LOAD_FAILED c=20
#: ../../Firmware/mmu.cpp:1587
msgid "MMU load failed"
msgstr "Neusp. MMU punjenje"
#. MSG_MMU_LOAD_FAILS c=15
#: ../../Firmware/messages.c:72 ../../Firmware/ultralcd.cpp:1483
#: ../../Firmware/ultralcd.cpp:1506
msgid "MMU load fails"
msgstr "Neusp. MMU punj"
#. MSG_MMU_USER_ATTENTION c=20 r=3
#: ../../Firmware/mmu.cpp:722
msgid "MMU needs user attention."
msgstr "MMU treba paznju korisnika."
#. MSG_MMU_POWER_FAILS c=15
#: ../../Firmware/ultralcd.cpp:1507
msgid "MMU power fails"
msgstr "Neusp. MMU nap"
#. MSG_MMU_CONNECTED c=18
#: ../../Firmware/ultralcd.cpp:1987
msgid "MMU2 connected"
msgstr "MMU2 spojen"
#. MSG_MAGNETS_COMP c=13
#: ../../Firmware/messages.c:152 ../../Firmware/ultralcd.cpp:6903
msgid "Magnets comp."
msgstr "Magnet. komp."
#. MSG_MAIN c=18
#: ../../Firmware/messages.c:65 ../../Firmware/ultralcd.cpp:1459
#: ../../Firmware/ultralcd.cpp:1607 ../../Firmware/ultralcd.cpp:1650
#: ../../Firmware/ultralcd.cpp:1952 ../../Firmware/ultralcd.cpp:2421
#: ../../Firmware/ultralcd.cpp:5655 ../../Firmware/ultralcd.cpp:5752
#: ../../Firmware/ultralcd.cpp:6150 ../../Firmware/ultralcd.cpp:6169
#: ../../Firmware/ultralcd.cpp:6195 ../../Firmware/ultralcd.cpp:6217
#: ../../Firmware/ultralcd.cpp:6243 ../../Firmware/ultralcd.cpp:6259
#: ../../Firmware/ultralcd.cpp:6786
msgid "Main"
msgstr "Nazad"
#. MSG_MARK_FIL c=20 r=8
#: ../../Firmware/ultralcd.cpp:4557
msgid "Mark filament 100mm from extruder body. Click when done."
msgstr ""
#. MSG_MEASURED_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2875
msgid "Measured skew"
msgstr "Mjereni nagib"
#. MSG_MEASURE_BED_REFERENCE_HEIGHT_LINE1 c=20 r=3
#: ../../Firmware/Marlin_main.cpp:3494
#: ../../Firmware/mesh_bed_calibration.cpp:2840 ../../Firmware/messages.c:69
msgid "Measuring reference height of calibration point"
msgstr "Mjerenje referentne visine kalibracijske tocke"
#. MSG_MESH c=12
#: ../../Firmware/messages.c:149 ../../Firmware/ultralcd.cpp:6899
msgid "Mesh"
msgstr "Mreza"
#. MSG_MESH_BED_LEVELING c=18
#: ../../Firmware/messages.c:150 ../../Firmware/ultralcd.cpp:5683
#: ../../Firmware/ultralcd.cpp:5778
msgid "Mesh Bed Leveling"
msgstr "Izrav. mrez. podl"
#. MSG_MODE c=6
#: ../../Firmware/messages.c:105 ../../Firmware/ultralcd.cpp:5196
#: ../../Firmware/ultralcd.cpp:5198 ../../Firmware/ultralcd.cpp:5218
#: ../../Firmware/ultralcd.cpp:5221 ../../Firmware/ultralcd.cpp:5224
#: ../../Firmware/ultralcd.cpp:5227 ../../Firmware/ultralcd.cpp:6831
#: ../../Firmware/ultralcd.cpp:6832 ../../Firmware/ultralcd.cpp:6844
#: ../../Firmware/ultralcd.cpp:6845 ../../Firmware/ultralcd.cpp:6846
#: ../../Firmware/ultralcd.cpp:6847 ../../Firmware/ultralcd.cpp:6931
msgid "Mode"
msgstr "Mod"
#: ../../Firmware/ultralcd.cpp:5288
msgid "Mode [Fast]"
msgstr ""
#: ../../Firmware/ultralcd.cpp:5291 ../../Firmware/ultralcd.cpp:5297
msgid "Mode [Optimal]"
msgstr ""
#: ../../Firmware/ultralcd.cpp:5294
msgid "Mode [Precise]"
msgstr ""
#. MSG_MODE_CHANGE_IN_PROGRESS c=20 r=3
#: ../../Firmware/ultralcd.cpp:4358
msgid "Mode change in progress..."
msgstr "Promjena moda u tijeku..."
#. MSG_MODEL c=8
#: ../../Firmware/messages.c:134 ../../Firmware/ultralcd.cpp:5435
#: ../../Firmware/ultralcd.cpp:5438 ../../Firmware/ultralcd.cpp:5441
#: ../../Firmware/ultralcd.cpp:5444
msgid "Model"
msgstr ""
#. MSG_SELFTEST_MOTOR c=18
#: ../../Firmware/messages.c:98 ../../Firmware/ultralcd.cpp:8046
#: ../../Firmware/ultralcd.cpp:8055 ../../Firmware/ultralcd.cpp:8073
msgid "Motor"
msgstr ""
#. MSG_MOVE_X c=18
#: ../../Firmware/ultralcd.cpp:4225
msgid "Move X"
msgstr "Pomaknite X"
#. MSG_MOVE_Y c=18
#: ../../Firmware/ultralcd.cpp:4226
msgid "Move Y"
msgstr "Pomaknite Y"
#. MSG_MOVE_Z c=18
#: ../../Firmware/ultralcd.cpp:4227
msgid "Move Z"
msgstr "Pomaknite Z"
#. MSG_MOVE_AXIS c=18
#: ../../Firmware/ultralcd.cpp:5661
msgid "Move axis"
msgstr "Pomaknite os"
#. MSG_NA c=3
#: ../../Firmware/menu.cpp:198 ../../Firmware/messages.c:129
#: ../../Firmware/ultralcd.cpp:2840 ../../Firmware/ultralcd.cpp:2885
#: ../../Firmware/ultralcd.cpp:3813 ../../Firmware/ultralcd.cpp:5088
#: ../../Firmware/ultralcd.cpp:5136 ../../Firmware/ultralcd.cpp:6806
#: ../../Firmware/ultralcd.cpp:6903
msgid "N/A"
msgstr ""
#. MSG_NEW_FIRMWARE_AVAILABLE c=20 r=2
#: ../../Firmware/util.cpp:195
msgid "New firmware version available:"
msgstr "Dostupna nova verzija firmwera:"
#. MSG_NO c=4
#: ../../Firmware/messages.c:73 ../../Firmware/ultralcd.cpp:3156
#: ../../Firmware/ultralcd.cpp:3547 ../../Firmware/ultralcd.cpp:3642
#: ../../Firmware/ultralcd.cpp:3647 ../../Firmware/ultralcd.cpp:5645
#: ../../Firmware/ultralcd.cpp:7047
msgid "No"
msgstr "Ne"
#. MSG_NO_CARD c=18
#: ../../Firmware/ultralcd.cpp:6602
msgid "No SD card"
msgstr "Nema SD kartice"
#. MSG_NO_MOVE c=20
#: ../../Firmware/Marlin_main.cpp:5815
msgid "No move."
msgstr "Bez pomaka."
#. MSG_ERR_NO_THERMISTORS
#: ../../Firmware/Marlin_main.cpp:2655
msgid "No thermistors - no temperature"
msgstr ""
#. MSG_NONE c=8
#: ../../Firmware/messages.c:131 ../../Firmware/ultralcd.cpp:5265
#: ../../Firmware/ultralcd.cpp:5353 ../../Firmware/ultralcd.cpp:5362
#: ../../Firmware/ultralcd.cpp:5435 ../../Firmware/ultralcd.cpp:5444
#: ../../Firmware/ultralcd.cpp:5474 ../../Firmware/ultralcd.cpp:5483
#: ../../Firmware/ultralcd.cpp:5515 ../../Firmware/ultralcd.cpp:5524
msgid "None"
msgstr "Nema"
#. MSG_NORMAL c=7
#: ../../Firmware/messages.c:109 ../../Firmware/ultralcd.cpp:5196
#: ../../Firmware/ultralcd.cpp:5241 ../../Firmware/ultralcd.cpp:5257
#: ../../Firmware/ultralcd.cpp:5276 ../../Firmware/ultralcd.cpp:6831
msgid "Normal"
msgstr ""
#. MSG_SELFTEST_NOTCONNECTED c=20
#: ../../Firmware/ultralcd.cpp:8033
msgid "Not connected"
msgstr "Nije povezano"
#. MSG_SELFTEST_FAN_NO c=19
#: ../../Firmware/messages.c:94 ../../Firmware/ultralcd.cpp:8232
#: ../../Firmware/ultralcd.cpp:8247 ../../Firmware/ultralcd.cpp:8255
msgid "Not spinning"
msgstr "Ne okrece se"
#. MSG_WIZARD_V2_CAL c=20 r=8
#: ../../Firmware/ultralcd.cpp:4822
msgid ""
"Now I will calibrate distance between tip of the nozzle and heatbed surface."
msgstr ""
"Sada cu kalibrirati udaljenost izmedu vrha mlaznice i povrsine grijane "
"podloge."
#. MSG_WIZARD_WILL_PREHEAT c=20 r=4
#: ../../Firmware/ultralcd.cpp:4951
msgid "Now I will preheat nozzle for PLA."
msgstr "Sada cu zagrijati mlaznicu za PLA."
#. MSG_REMOVE_TEST_PRINT c=20 r=4
#: ../../Firmware/ultralcd.cpp:4942
msgid "Now remove the test print from steel sheet."
msgstr "Sada uklonite probni print sa celicne ploce."
#. MSG_NOZZLE c=10
#: ../../Firmware/messages.c:74 ../../Firmware/ultralcd.cpp:1714
#: ../../Firmware/ultralcd.cpp:5353 ../../Firmware/ultralcd.cpp:5356
#: ../../Firmware/ultralcd.cpp:5359 ../../Firmware/ultralcd.cpp:5362
#: ../../Firmware/ultralcd.cpp:6789 ../../Firmware/ultralcd.cpp:6949
msgid "Nozzle"
msgstr "Mlaznica"
#. MSG_NOZZLE_DIAMETER c=10
#: ../../Firmware/messages.c:138 ../../Firmware/ultralcd.cpp:5406
msgid "Nozzle d."
msgstr "Mlaznica."
#. MSG_NOZZLE1
#: ../../Firmware/ultralcd.cpp:6952
msgid "Nozzle2"
msgstr ""
#. MSG_NOZZLE2
#: ../../Firmware/ultralcd.cpp:6955
msgid "Nozzle3"
msgstr ""
#. MSG_OFF c=3
#: ../../Firmware/menu.cpp:469 ../../Firmware/messages.c:127
#: ../../Firmware/ultralcd.cpp:5094 ../../Firmware/ultralcd.cpp:5110
#: ../../Firmware/ultralcd.cpp:5144 ../../Firmware/ultralcd.cpp:5173
#: ../../Firmware/ultralcd.cpp:5202 ../../Firmware/ultralcd.cpp:5671
#: ../../Firmware/ultralcd.cpp:5690 ../../Firmware/ultralcd.cpp:5694
#: ../../Firmware/ultralcd.cpp:6711 ../../Firmware/ultralcd.cpp:6810
#: ../../Firmware/ultralcd.cpp:6825 ../../Firmware/ultralcd.cpp:6837
#: ../../Firmware/ultralcd.cpp:6903 ../../Firmware/ultralcd.cpp:8974
#: ../../Firmware/ultralcd.cpp:8978
msgid "Off"
msgstr ""
#. MSG_DEFAULT_SETTINGS_LOADED c=20 r=6
#: ../../Firmware/Marlin_main.cpp:1562
msgid "Old settings found. Default PID, Esteps etc. will be set."
msgstr "Pronadene stare postavke. Postavit ce se zadani PID, Esteps itd."
#. MSG_ON c=3
#: ../../Firmware/messages.c:128 ../../Firmware/ultralcd.cpp:5104
#: ../../Firmware/ultralcd.cpp:5108 ../../Firmware/ultralcd.cpp:5140
#: ../../Firmware/ultralcd.cpp:5163 ../../Firmware/ultralcd.cpp:5201
#: ../../Firmware/ultralcd.cpp:5671 ../../Firmware/ultralcd.cpp:5690
#: ../../Firmware/ultralcd.cpp:5694 ../../Firmware/ultralcd.cpp:6814
#: ../../Firmware/ultralcd.cpp:6825 ../../Firmware/ultralcd.cpp:6836
#: ../../Firmware/ultralcd.cpp:6903 ../../Firmware/ultralcd.cpp:8974
#: ../../Firmware/ultralcd.cpp:8978
msgid "On"
msgstr ""
#. MSG_SOUND_ONCE c=7
#: ../../Firmware/messages.c:147 ../../Firmware/ultralcd.cpp:5313
msgid "Once"
msgstr "Jednom"
#. MSG_PID_RUNNING c=20
#: ../../Firmware/ultralcd.cpp:1322
msgid "PID cal."
msgstr "PID kal."
#. MSG_PID_FINISHED c=20
#: ../../Firmware/ultralcd.cpp:1328
msgid "PID cal. finished"
msgstr "PID kal. zavrsena"
#. MSG_PID_EXTRUDER c=17
#: ../../Firmware/ultralcd.cpp:5783
msgid "PID calibration"
msgstr "PID kalibracija"
#. MSG_PINDA c=5
#: ../../Firmware/messages.c:174 ../../Firmware/ultralcd.cpp:1720
#: ../../Firmware/ultralcd.cpp:3841
msgid "PINDA"
msgstr ""
#. MSG_PINDA_PREHEAT c=20
#: ../../Firmware/ultralcd.cpp:678
msgid "PINDA Heating"
msgstr "PINDA se Zagrijava"
#. MSG_PINDA_CALIBRATION c=13
#: ../../Firmware/Marlin_main.cpp:5362 ../../Firmware/Marlin_main.cpp:5463
#: ../../Firmware/messages.c:114 ../../Firmware/ultralcd.cpp:675
#: ../../Firmware/ultralcd.cpp:5690 ../../Firmware/ultralcd.cpp:5796
msgid "PINDA cal."
msgstr "PINDA kal."
#. MSG_PINDA_CAL_FAILED c=20 r=4
#: ../../Firmware/ultralcd.cpp:3763
msgid "PINDA calibration failed"
msgstr "Kalibracija PINDA nije uspjela"
#. MSG_PINDA_CALIBRATION_DONE c=20 r=8
#: ../../Firmware/Marlin_main.cpp:5540 ../../Firmware/messages.c:115
#: ../../Firmware/ultralcd.cpp:3757
msgid ""
"PINDA calibration is finished and active. It can be disabled in menu "
"Settings->PINDA cal."
msgstr ""
"Kalibracija PINDA je zavrsena i aktivna. Moze se onemoguciti u izborniku "
"Postavke->PINDA. kal."
#. MSG_PAUSE c=5
#: ../../Firmware/messages.c:155 ../../Firmware/ultralcd.cpp:5567
msgid "Pause"
msgstr "Pauza"
#. MSG_PAUSE_PRINT c=18
#: ../../Firmware/messages.c:76 ../../Firmware/ultralcd.cpp:6565
#: ../../Firmware/ultralcd.cpp:6567
msgid "Pause print"
msgstr "Pauzirajte print"
#. MSG_PICK_Z
#: ../../Firmware/ultralcd.cpp:4131
msgid "Pick print"
msgstr ""
#. MSG_PAPER c=20 r=10
#: ../../Firmware/Marlin_main.cpp:3516 ../../Firmware/messages.c:75
msgid ""
"Place a sheet of paper under the nozzle during the calibration of first 4 "
"points. If the nozzle catches the paper, power off the printer immediately."
msgstr ""
"Stavite list papira ispod mlaznice tijekom kalibracije prve 4 tocke. Ako "
"mlaznica uhvati papir, odmah iskljucite printer."
#. MSG_WIZARD_CALIBRATION_FAILED c=20 r=8
#: ../../Firmware/messages.c:119 ../../Firmware/ultralcd.cpp:5036
msgid ""
"Please check our handbook and fix the problem. Then resume the Wizard by "
"rebooting the printer."
msgstr ""
"Provjerite nas prirucnik i rijesite problem. Zatim nastavite s Carobnjakom "
"ponovnim pokretanjem printera."
#. MSG_CHECK_IR_CONNECTION c=20 r=4
#: ../../Firmware/ultralcd.cpp:7312
msgid "Please check the IR sensor connection, unload filament if present."
msgstr "Provjerite IR prikljucak senzora, izvadite filament ako postoji."
#. MSG_SELFTEST_PLEASECHECK c=20
#: ../../Firmware/ultralcd.cpp:8027
msgid "Please check:"
msgstr "Molimo provjerite:"
#. MSG_WIZARD_CLEAN_HEATBED c=20 r=8
#: ../../Firmware/ultralcd.cpp:5008
msgid "Please clean heatbed and then press the knob."
msgstr "Ocistite grijacu podlogu, a zatim pritisnite gumb."
#. MSG_CONFIRM_NOZZLE_CLEAN c=20 r=8
#: ../../Firmware/Marlin_main.cpp:3492 ../../Firmware/messages.c:26
msgid "Please clean the nozzle for calibration. Click when done."
msgstr "Molimo ocistite mlaznicu radi kalibracije. Kliknite kada ste gotovi."
#. MSG_WIZARD_LOAD_FILAMENT c=20 r=6
#: ../../Firmware/ultralcd.cpp:4802
msgid ""
"Please insert filament into the extruder, then press the knob to load it."
msgstr "Umetnite filament u ekstruder, a zatim pritisnite gumb za punjenje."
#. MSG_MMU_INSERT_FILAMENT_FIRST_TUBE c=20 r=6
#: ../../Firmware/ultralcd.cpp:4797
msgid ""
"Please insert filament into the first tube of the MMU, then press the knob "
"to load it."
msgstr ""
"Umetnite filament u prvu cijev MMU-a, a zatim pritisnite gumb za punjenje."
#. MSG_PLEASE_LOAD_PLA c=20 r=4
#: ../../Firmware/ultralcd.cpp:4719
msgid "Please load filament first."
msgstr "Molimo prvo ubacite filament."
#. MSG_CHECK_IDLER c=20 r=5
#: ../../Firmware/Marlin_main.cpp:3756
msgid "Please open idler and remove filament manually."
msgstr "Molimo otvorite klizac i rucno uklonite filament."
#. MSG_PLACE_STEEL_SHEET c=20 r=5
#: ../../Firmware/mesh_bed_calibration.cpp:2799 ../../Firmware/messages.c:77
#: ../../Firmware/ultralcd.cpp:4945
msgid "Please place steel sheet on heatbed."
msgstr "Stavite celicnu plocu na grijacu podlogu."
#. MSG_PRESS_TO_UNLOAD c=20 r=4
#: ../../Firmware/Marlin_main.cpp:11984 ../../Firmware/Marlin_main.cpp:12037
#: ../../Firmware/messages.c:81
msgid "Please press the knob to unload filament"
msgstr "Pritisnite gumb za praznjenje filamenta"
#. MSG_PULL_OUT_FILAMENT c=20 r=4
#: ../../Firmware/messages.c:83 ../../Firmware/ultralcd.cpp:6290
msgid "Please pull out filament immediately"
msgstr "Molimo odmah izvucite filament"
#. MSG_EJECT_REMOVE c=20 r=4
#: ../../Firmware/mmu.cpp:1421
msgid "Please remove filament and then press the knob."
msgstr "Molimo uklonite filament i zatim pritisnite gumb."
#. MSG_REMOVE_SHIPPING_HELPERS c=20 r=3
#: ../../Firmware/ultralcd.cpp:4941
msgid "Please remove shipping helpers first."
msgstr "Najprije uklonite prijevozne osloce."
#. MSG_REMOVE_STEEL_SHEET c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3514 ../../Firmware/Marlin_main.cpp:5325
#: ../../Firmware/messages.c:86
msgid "Please remove steel sheet from heatbed."
msgstr "Molimo uklonite celicnu plocu sa grijace podloge."
#. MSG_RUN_XYZ c=20 r=4
#: ../../Firmware/Marlin_main.cpp:5301
msgid "Please run XYZ calibration first."
msgstr "Prvo pokrenite XYZ kalibraciju."
#. MSG_UNLOAD_FILAMENT_REPEAT c=20 r=4
#: ../../Firmware/ultralcd.cpp:7309
msgid "Please unload the filament first, then repeat this action."
msgstr "Prvo izvadite filament, a zatim ponovite ovu radnju."
#. MSG_UPDATE_MMU2_FW c=20 r=4
#: ../../Firmware/mmu.cpp:1341
msgid "Please update firmware in your MMU2. Waiting for reset."
msgstr "Azurirajte firmwer u svom MMU2. Ceka se resetiranje."
#. MSG_NEW_FIRMWARE_PLEASE_UPGRADE c=20
#: ../../Firmware/util.cpp:199
msgid "Please upgrade."
msgstr "Molimo nadogradite."
#. MSG_PLEASE_WAIT c=20
#: ../../Firmware/Marlin_main.cpp:3752 ../../Firmware/Marlin_main.cpp:3768
#: ../../Firmware/Marlin_main.cpp:8276 ../../Firmware/messages.c:78
#: ../../Firmware/mmu.cpp:1040 ../../Firmware/mmu.cpp:1121
#: ../../Firmware/ultralcd.cpp:2507 ../../Firmware/ultralcd.cpp:2518
#: ../../Firmware/ultralcd.cpp:4561
msgid "Please wait"
msgstr "Molimo pricekajte"
#. MSG_POWER_FAILURES c=15
#: ../../Firmware/messages.c:79 ../../Firmware/ultralcd.cpp:1531
#: ../../Firmware/ultralcd.cpp:1572 ../../Firmware/ultralcd.cpp:1582
msgid "Power failures"
msgstr "Prekidi struje"
#. MSG_PREHEAT c=18
#: ../../Firmware/ultralcd.cpp:6560
msgid "Preheat"
msgstr "Predgrijavanje"
#. MSG_PREHEAT_NOZZLE c=20
#: ../../Firmware/messages.c:80 ../../Firmware/ultralcd.cpp:2617
msgid "Preheat the nozzle!"
msgstr "Predgr. mlaznicu!"
#. MSG_WIZARD_HEATING c=20 r=3
#: ../../Firmware/messages.c:121 ../../Firmware/ultralcd.cpp:3256
#: ../../Firmware/ultralcd.cpp:4780 ../../Firmware/ultralcd.cpp:4783
msgid "Preheating nozzle. Please wait."
msgstr "Predgrijavanje mlaznice. Molim vas pricekajte."
#. MSG_PREHEATING_TO_CUT c=20
#: ../../Firmware/ultralcd.cpp:2299
msgid "Preheating to cut"
msgstr "Predgr. za rezanje"
#. MSG_PREHEATING_TO_EJECT c=20
#: ../../Firmware/ultralcd.cpp:2296
msgid "Preheating to eject"
msgstr "Predgr. za izbaci."
#. MSG_PREHEATING_TO_LOAD c=20
#: ../../Firmware/ultralcd.cpp:2287
msgid "Preheating to load"
msgstr "Predgr. za punjenje"
#. MSG_PREHEATING_TO_UNLOAD c=20
#: ../../Firmware/ultralcd.cpp:2292
msgid "Preheating to unload"
msgstr "Predgr. za praznj."
#. MSG_PREPARE_FILAMENT c=20
#: ../../Firmware/ultralcd.cpp:2470
msgid "Prepare new filament"
msgstr ""
#. MSG_PRESS_KNOB c=20
#: ../../Firmware/ultralcd.cpp:2120
msgid "Press the knob"
msgstr "Pritisnite gumb"
#. MSG_PRESS_TO_PREHEAT c=20 r=4
#: ../../Firmware/Marlin_main.cpp:12015
msgid "Press the knob to preheat nozzle and continue."
msgstr "Pritisnite gumb za predgrijavanje mlaznice i nastavite."
#. MSG_RESUME_NOZZLE_TEMP c=20 r=4
#: ../../Firmware/mmu.cpp:726
msgid "Press the knob to resume nozzle temperature."
msgstr "Pritisnite gumb za nastavak temperature mlaznice."
#. MSG_PRINT_ABORTED c=20
#: ../../Firmware/messages.c:82 ../../Firmware/ultralcd.cpp:7006
msgid "Print aborted"
msgstr "Print je prekinut"
#. MSG_PRINT_FAN_SPEED c=16
#: ../../Firmware/messages.c:38 ../../Firmware/ultralcd.cpp:1438
#: ../../Firmware/ultralcd.cpp:8406
msgid "Print fan:"
msgstr "Vent printa:"
#. MSG_CARD_MENU c=18
#: ../../Firmware/messages.c:22 ../../Firmware/ultralcd.cpp:6593
msgid "Print from SD"
msgstr "Printaj sa SD"
#. MSG_PRINT_PAUSED c=20
#: ../../Firmware/ultralcd.cpp:902
msgid "Print paused"
msgstr "Print pauziran"
#. MSG_PRINT_TIME c=19
#: ../../Firmware/ultralcd.cpp:2704
msgid "Print time"
msgstr "Vrijeme printanja"
#. MSG_PRINTER_IP c=18
#: ../../Firmware/ultralcd.cpp:2018
msgid "Printer IP Addr:"
msgstr ""
#. MSG_FOLLOW_CALIBRATION_FLOW c=20 r=8
#: ../../Firmware/Marlin_main.cpp:1575 ../../Firmware/messages.c:48
msgid ""
"Printer has not been calibrated yet. Please follow the manual, chapter First "
"steps, section Calibration flow."
msgstr ""
"Printer jos nije kalibriran. Molimo slijedite prirucnik, poglavlje Prvi "
"koraci, odjeljak Tijek kalibracije."
#. MSG_NOZZLE_DIFFERS_CONTINUE c=20 r=5
#: ../../Firmware/util.cpp:295
msgid "Printer nozzle diameter differs from the G-code. Continue?"
msgstr "Promjer mlaznice printera razlikuje se od G-koda. Nastavite?"
#. MSG_NOZZLE_DIFFERS_CANCELLED c=20 r=9
#: ../../Firmware/util.cpp:301
msgid ""
"Printer nozzle diameter differs from the G-code. Please check the value in "
"settings. Print cancelled."
msgstr ""
"Promjer mlaznice printera razlikuje se od G-koda. Molimo provjerite "
"vrijednost u postavkama. Print je otkazan."
#. MSG_RPI_PORT c=13
#: ../../Firmware/messages.c:144 ../../Firmware/ultralcd.cpp:5694
msgid "RPi port"
msgstr "RPi utor"
#. MSG_BED_CORRECTION_REAR c=14
#: ../../Firmware/ultralcd.cpp:3107
msgid "Rear side [μm]"
msgstr "Zad. str.[μm]"
#. MSG_RECOVERING_PRINT c=20
#: ../../Firmware/Marlin_main.cpp:11359
msgid "Recovering print"
msgstr "Oporavak printa"
#. MSG_REMOVE_OLD_FILAMENT c=20 r=5
#: ../../Firmware/mmu.cpp:833
msgid "Remove old filament and press the knob to start loading new filament."
msgstr ""
"Uklonite stari filament i pritisnite gumb za pocetak stavljanja novog "
"filamenta."
#. MSG_RENAME c=18
#: ../../Firmware/ultralcd.cpp:6484
msgid "Rename"
msgstr "Preimenuj"
#. MSG_RESET c=14
#: ../../Firmware/messages.c:87 ../../Firmware/ultralcd.cpp:3108
#: ../../Firmware/ultralcd.cpp:6485
msgid "Reset"
msgstr "Resetiraj"
#. MSG_CALIBRATE_BED_RESET c=18
#: ../../Firmware/ultralcd.cpp:5788
msgid "Reset XYZ calibr."
msgstr "Reset XYZ kalibr."
#. MSG_RESUME_PRINT c=18
#: ../../Firmware/messages.c:88 ../../Firmware/ultralcd.cpp:6577
#: ../../Firmware/ultralcd.cpp:6579
msgid "Resume print"
msgstr "Nastavite print"
#. MSG_RESUMING_PRINT c=20
#: ../../Firmware/messages.c:89 ../../Firmware/ultralcd.cpp:686
msgid "Resuming print"
msgstr "Nastavak printa"
#. MSG_RIGHT c=10
#: ../../Firmware/ultralcd.cpp:2835
msgid "Right"
msgstr "Tocno"
#. MSG_BED_CORRECTION_RIGHT c=14
#: ../../Firmware/ultralcd.cpp:3105
msgid "Right side[μm]"
msgstr "Desna str.[μm]"
#. MSG_E_CAL_KNOB c=20 r=8
#: ../../Firmware/ultralcd.cpp:4552
msgid "Rotate knob until mark reaches extruder body. Click when done."
msgstr ""
#. MSG_WIZARD_RERUN c=20 r=7
#: ../../Firmware/ultralcd.cpp:4740
msgid ""
"Running Wizard will delete current calibration results and start from the "
"beginning. Continue?"
msgstr ""
"Pokrenuti carobnjak ce izbrisati trenutne rezultate kalibracije i poceti "
"ispocetka. Nastavite?"
#. MSG_RUNOUTS c=7
#: ../../Firmware/ultralcd.cpp:1583
msgid "Runouts"
msgstr "Nestalo"
#. MSG_SD_CARD c=8
#: ../../Firmware/messages.c:140 ../../Firmware/ultralcd.cpp:5255
#: ../../Firmware/ultralcd.cpp:5257 ../../Firmware/ultralcd.cpp:5274
#: ../../Firmware/ultralcd.cpp:5276
msgid "SD card"
msgstr "SD karti"
#. MSG_STOPPED c=20
#: ../../Firmware/Marlin_main.cpp:10175 ../../Firmware/cmdqueue.cpp:495
#: ../../Firmware/messages.c:113
msgid "STOPPED."
msgstr "ZAUSTAVLJENO."
#. MSG_FIND_BED_OFFSET_AND_SKEW_LINE1 c=20 r=3
#: ../../Firmware/Marlin_main.cpp:3498 ../../Firmware/Marlin_main.cpp:3518
#: ../../Firmware/mesh_bed_calibration.cpp:2234 ../../Firmware/messages.c:46
msgid "Searching bed calibration point"
msgstr "Trazenje tocke kalibracije podloge"
#. MSG_SELECT c=18
#: ../../Firmware/ultralcd.cpp:6477
msgid "Select"
msgstr "Odaberi"
#. MSG_SELECT_FIL_1ST_LAYERCAL c=20 r=7
#: ../../Firmware/ultralcd.cpp:4826
msgid ""
"Select a filament for the First Layer Calibration and select it in the on-"
"screen menu."
msgstr ""
"Odaberite filament za Kalibraciju Prvog Sloja i odaberite ga u izborniku na "
"zaslonu."
#. MSG_SELECT_EXTRUDER c=20
#: ../../Firmware/Marlin_main.cpp:8967 ../../Firmware/messages.c:56
msgid "Select extruder:"
msgstr "Odaberite ekstruder:"
#. MSG_SELECT_FILAMENT c=20
#: ../../Firmware/Marlin_main.cpp:8936 ../../Firmware/Marlin_main.cpp:8963
#: ../../Firmware/messages.c:57 ../../Firmware/ultralcd.cpp:4690
msgid "Select filament:"
msgstr "Odaberi filament:"
#. MSG_LANGUAGE_SELECT c=18
#: ../../Firmware/ultralcd.cpp:4443 ../../Firmware/ultralcd.cpp:5701
msgid "Select language"
msgstr "Izaberi jezik"
#. MSG_SEL_PREHEAT_TEMP c=20 r=6
#: ../../Firmware/ultralcd.cpp:4982
msgid "Select nozzle preheat temperature which matches your material."
msgstr ""
"Odaberite temperaturu predgrijavanja mlaznice koja odgovara vasem materijalu."
#. MSG_SELECT_TEMP_MATCHES_MATERIAL c=20 r=4
#: ../../Firmware/ultralcd.cpp:4831
msgid "Select temperature which matches your material."
msgstr "Odaberite temperaturu koja odgovara vasem materijalu."
#. MSG_SELFTEST_OK c=20
#: ../../Firmware/ultralcd.cpp:7584
msgid "Self test OK"
msgstr "Samotestiranje OK"
#. MSG_SELFTEST_START c=20
#: ../../Firmware/ultralcd.cpp:7352
msgid "Self test start"
msgstr "Pocetak selftesta"
#. MSG_SELFTEST c=18
#: ../../Firmware/ultralcd.cpp:5764
msgid "Selftest"
msgstr ""
#. MSG_SELFTEST_ERROR c=20
#: ../../Firmware/ultralcd.cpp:8026
msgid "Selftest error!"
msgstr ""
#. MSG_SELFTEST_FAILED c=20
#: ../../Firmware/messages.c:92 ../../Firmware/ultralcd.cpp:7588
#: ../../Firmware/ultralcd.cpp:8113 ../../Firmware/ultralcd.cpp:8396
msgid "Selftest failed"
msgstr "Selftest nije uspio"
#. MSG_FORCE_SELFTEST c=20 r=8
#: ../../Firmware/Marlin_main.cpp:1594
msgid "Selftest will be run to calibrate accurate sensorless rehoming."
msgstr ""
"Provest ce se selftest radi kalibracije preciznog ponovnog postavljanja bez "
"senzora."
#. MSG_INFO_SENSORS c=18
#: ../../Firmware/ultralcd.cpp:2031
msgid "Sensor info"
msgstr "Info senzora"
#. MSG_FS_VERIFIED c=20 r=3
#: ../../Firmware/ultralcd.cpp:7316
msgid "Sensor verified, remove the filament now."
msgstr "Senzor je provjeren, odmah uklonite filament."
#. MSG_SET_TEMPERATURE c=20
#: ../../Firmware/ultralcd.cpp:3125
msgid "Set temperature:"
msgstr "Postavi temperaturu:"
#. MSG_SETTINGS c=18
#: ../../Firmware/messages.c:101 ../../Firmware/ultralcd.cpp:4224
#: ../../Firmware/ultralcd.cpp:4460 ../../Firmware/ultralcd.cpp:5066
#: ../../Firmware/ultralcd.cpp:6647 ../../Firmware/ultralcd.cpp:6894
#: ../../Firmware/ultralcd.cpp:6947
msgid "Settings"
msgstr "Postavke"
#. MSG_SEVERE_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2878
msgid "Severe skew"
msgstr "Veliki nagib"
#. MSG_SHEET c=10
#: ../../Firmware/menu.cpp:211 ../../Firmware/menu.cpp:223
#: ../../Firmware/messages.c:67
msgid "Sheet"
msgstr "Ploca"
#. MSG_SHEET_OFFSET c=20 r=4
#: ../../Firmware/ultralcd.cpp:4680
msgid ""
"Sheet %.7s\n"
"Z offset: %+1.3fmm\n"
"%cContinue\n"
"%cReset"
msgstr ""
"Ploca %.7s\n"
"Z offset: %+1.3fmm\n"
"%cNastaviti\n"
"%cResetiraj"
#. MSG_SHOW_END_STOPS c=18
#: ../../Firmware/ultralcd.cpp:5785
msgid "Show end stops"
msgstr "Pokazi granicnike"
#. MSG_SILENT c=7
#: ../../Firmware/messages.c:108 ../../Firmware/ultralcd.cpp:5221
#: ../../Firmware/ultralcd.cpp:5316 ../../Firmware/ultralcd.cpp:6845
msgid "Silent"
msgstr "Tih"
#. MSG_SLIGHT_SKEW c=14
#: ../../Firmware/ultralcd.cpp:2877
msgid "Slight skew"
msgstr "Lagani nagib"
#. MSG_FILE_CNT c=20 r=6
#: ../../Firmware/cardreader.cpp:817
msgid ""
"Some files will not be sorted. Max. No. of files in 1 folder for sorting is "
"100."
msgstr ""
"Neke datoteke nece biti razvrstane. Max. Br. datoteka u 1 mapi za sortiranje "
"je 100."
#. MSG_ZLEVELING_ENFORCED c=20 r=4
#: ../../Firmware/Marlin_main.cpp:3260
msgid "Some problem encountered, Z-leveling enforced ..."
msgstr "Naisao je neki problem, nametnuto Z-niveliranje..."
#. MSG_SORT c=7
#: ../../Firmware/messages.c:141 ../../Firmware/ultralcd.cpp:5263
#: ../../Firmware/ultralcd.cpp:5264 ../../Firmware/ultralcd.cpp:5265
msgid "Sort"
msgstr "Vrsta"
#. MSG_SORTING_FILES c=20
#: ../../Firmware/cardreader.cpp:882 ../../Firmware/cardreader.cpp:942
msgid "Sorting files"
msgstr "Sortiranje datoteka"
#. MSG_SORTING_FOLDERS c=20
#: ../../Firmware/cardreader.cpp:883
msgid "Sorting folders"
msgstr ""
#. MSG_SOUND c=9
#: ../../Firmware/messages.c:145 ../../Firmware/ultralcd.cpp:5310
#: ../../Firmware/ultralcd.cpp:5313 ../../Firmware/ultralcd.cpp:5316
#: ../../Firmware/ultralcd.cpp:5319 ../../Firmware/ultralcd.cpp:5322
msgid "Sound"
msgstr "Zvuk"
#. MSG_SPEED c=15
#: ../../Firmware/ultralcd.cpp:6787
msgid "Speed"
msgstr "Brzina"
#. MSG_SELFTEST_FAN_YES c=19
#: ../../Firmware/messages.c:95 ../../Firmware/ultralcd.cpp:8230
#: ../../Firmware/ultralcd.cpp:8245 ../../Firmware/ultralcd.cpp:8253
msgid "Spinning"
msgstr "Okrece se"
#. MSG_AUTO_DEPLETE c=13
#: ../../Firmware/messages.c:171 ../../Firmware/ultralcd.cpp:5136
#: ../../Firmware/ultralcd.cpp:5140 ../../Firmware/ultralcd.cpp:5144
msgid "SpoolJoin"
msgstr ""
#. MSG_TEMP_CAL_WARNING c=20 r=4
#: ../../Firmware/Marlin_main.cpp:5314
msgid "Stable ambient temperature 21-26C is needed a rigid stand is required."
msgstr ""
"Potrebna je stabilna temperatura okoline 21-26C, potrebno je cvrsto postolje."
#. MSG_STATISTICS c=18
#: ../../Firmware/ultralcd.cpp:6652
msgid "Statistics"
msgstr "Statistika"
#. MSG_STEALTH c=7
#: ../../Firmware/messages.c:110 ../../Firmware/ultralcd.cpp:5198
#: ../../Firmware/ultralcd.cpp:5242 ../../Firmware/ultralcd.cpp:6832
msgid "Stealth"
msgstr "Tiho"
#. MSG_STEEL_SHEETS c=18
#: ../../Firmware/messages.c:68 ../../Firmware/ultralcd.cpp:5623
#: ../../Firmware/ultralcd.cpp:6474
msgid "Steel sheets"
msgstr "Celicna ploca"
#. MSG_STOP_PRINT c=18
#: ../../Firmware/messages.c:112 ../../Firmware/ultralcd.cpp:6584
#: ../../Firmware/ultralcd.cpp:7046
msgid "Stop print"
msgstr "Zaustavi print"
#. MSG_STRICT c=8
#: ../../Firmware/messages.c:133 ../../Firmware/ultralcd.cpp:5359
#: ../../Firmware/ultralcd.cpp:5441 ../../Firmware/ultralcd.cpp:5480
#: ../../Firmware/ultralcd.cpp:5521
msgid "Strict"
msgstr "Strogo"
#. MSG_SUPPORT c=18
#: ../../Firmware/ultralcd.cpp:6661
msgid "Support"
msgstr "Podrska"
#. MSG_SELFTEST_SWAPPED c=16
#: ../../Firmware/ultralcd.cpp:8085
msgid "Swapped"
msgstr "Zamjenjeno"
#. MSG_TEMPERATURE c=18
#: ../../Firmware/ultralcd.cpp:5657
msgid "Temperature"
msgstr "Temperatura"
#. MSG_MENU_TEMPERATURES c=18
#: ../../Firmware/ultralcd.cpp:2037
msgid "Temperatures"
msgstr "Temperature"
#. MSG_WIZARD_V2_CAL_2 c=20 r=12
#: ../../Firmware/ultralcd.cpp:4834
msgid ""
"The printer will start printing a zig-zag line. Rotate the knob until you "
"reach the optimal height. Check the pictures in the handbook (Calibration "
"chapter)."
msgstr ""
"Printe ce poceti printati cik-cak liniju. Okrecite gumb dok ne postignete "
"optimalnu visinu. Provjerite slike u prirucniku (poglavlje Kalibracija)."
#. MSG_FOLLOW_Z_CALIBRATION_FLOW c=20 r=9
#: ../../Firmware/Marlin_main.cpp:1588 ../../Firmware/messages.c:49
msgid ""
"There is still a need to make Z calibration. Please follow the manual, "
"chapter First steps, section Calibration flow."
msgstr ""
"Jos uvijek je potrebno napraviti Z kalibraciju. Molimo slijedite prirucnik, "
"poglavlje Prvi koraci, odjeljak Tijek kalibracije."
#. MSG_SORT_TIME c=8
#: ../../Firmware/messages.c:142 ../../Firmware/ultralcd.cpp:5263
msgid "Time"
msgstr "Vrijeme"
#. MSG_TIMEOUT c=12
#: ../../Firmware/messages.c:159 ../../Firmware/ultralcd.cpp:6932
msgid "Timeout"
msgstr "Pauza"
#. MSG_TOTAL c=6
#: ../../Firmware/messages.c:102 ../../Firmware/ultralcd.cpp:1461
#: ../../Firmware/ultralcd.cpp:1609
msgid "Total"
msgstr "Ukupno"
#. MSG_TOTAL_FAILURES c=20
#: ../../Firmware/messages.c:103 ../../Firmware/ultralcd.cpp:1504
#: ../../Firmware/ultralcd.cpp:1530 ../../Firmware/ultralcd.cpp:1640
msgid "Total failures"
msgstr "Totalne pogreske"
#. MSG_TOTAL_FILAMENT c=19
#: ../../Firmware/ultralcd.cpp:2725
msgid "Total filament"
msgstr "Totalno filamenta"
#. MSG_TOTAL_PRINT_TIME c=19
#: ../../Firmware/ultralcd.cpp:2726
msgid "Total print time"
msgstr "Vrijeme printanja"
#. MSG_TUNE c=18
#: ../../Firmware/ultralcd.cpp:6558
msgid "Tune"
msgstr "Ugodi"
#. MSG_UNLOAD_ALL c=17
#: ../../Firmware/ultralcd.cpp:6244
msgid "Unload all"
msgstr ""
#. MSG_UNLOAD_FILAMENT c=18
#: ../../Firmware/messages.c:116 ../../Firmware/ultralcd.cpp:5910
#: ../../Firmware/ultralcd.cpp:6625 ../../Firmware/ultralcd.cpp:6632
#: ../../Firmware/ultralcd.cpp:6645
msgid "Unload filament"
msgstr "Ispraznite fil."
#. MSG_UNLOAD_FILAMENT_1 c=17
#: ../../Firmware/ultralcd.cpp:6245
msgid "Unload filament 1"
msgstr ""
#. MSG_UNLOAD_FILAMENT_2 c=17
#: ../../Firmware/ultralcd.cpp:6246
msgid "Unload filament 2"
msgstr ""
#. MSG_UNLOAD_FILAMENT_3 c=17
#: ../../Firmware/ultralcd.cpp:6247
msgid "Unload filament 3"
msgstr ""
#. MSG_UNLOAD_FILAMENT_4 c=17
#: ../../Firmware/ultralcd.cpp:6248
msgid "Unload filament 4"
msgstr ""
#. MSG_UNLOAD_FILAMENT_5 c=17
#: ../../Firmware/ultralcd.cpp:6251
msgid "Unload filament 5"
msgstr ""
#. MSG_UNLOADING_FILAMENT c=20
#: ../../Firmware/messages.c:117 ../../Firmware/mmu.cpp:1085
#: ../../Firmware/mmu.cpp:1118 ../../Firmware/ultralcd.cpp:6274
msgid "Unloading filament"
msgstr "Praznjenje filamenta"
#. MSG_USED c=19
#: ../../Firmware/ultralcd.cpp:5912
msgid "Used during print"
msgstr ""
#. MSG_FIL_FAILED c=20 r=5
#: ../../Firmware/ultralcd.cpp:7320
msgid "Verification failed, remove the filament and try again."
msgstr "Provjera nije uspjela, uklonite filament i pokusajte ponovno."
#. MSG_MENU_VOLTAGES c=18
#: ../../Firmware/ultralcd.cpp:2040
msgid "Voltages"
msgstr "Voltaza"
#. MSG_CRASH_DET_STEALTH_FORCE_OFF c=20 r=4
#: ../../Firmware/ultralcd.cpp:4294
msgid ""
"WARNING:\n"
"Crash detection\n"
"disabled in\n"
"Stealth mode"
msgstr ""
"UPOZORENJE:\n"
"detekcija udarca je iskljucena\n"
"u tihom modu"
#. MSG_USERWAIT c=20
#: ../../Firmware/Marlin_main.cpp:4311
msgid "Wait for user..."
msgstr "Ceka se korisnik..."
#. MSG_WAITING_TEMP_PINDA c=20 r=3
#: ../../Firmware/ultralcd.cpp:3234
msgid "Waiting for PINDA probe cooling"
msgstr "Ceka se hladenje PINDA sonde"
#. MSG_WAITING_TEMP c=20 r=4
#: ../../Firmware/ultralcd.cpp:3273
msgid "Waiting for nozzle and bed cooling"
msgstr "Ceka se hladjenje mlaznice i podloge"
#. MSG_WARN c=8
#: ../../Firmware/messages.c:132 ../../Firmware/ultralcd.cpp:5356
#: ../../Firmware/ultralcd.cpp:5438 ../../Firmware/ultralcd.cpp:5477
#: ../../Firmware/ultralcd.cpp:5518
msgid "Warn"
msgstr "Upozore"
#. MSG_CHANGED_BOTH c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1554
msgid "Warning: both printer type and motherboard type changed."
msgstr "Upozorenje: promijenjeni su i tip printera i tip maticne ploce."
#. MSG_CHANGED_MOTHERBOARD c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1546
msgid "Warning: motherboard type changed."
msgstr "Upozorenje: tip maticne ploce je promijenjen."
#. MSG_CHANGED_PRINTER c=20 r=4
#: ../../Firmware/Marlin_main.cpp:1550
msgid "Warning: printer type changed."
msgstr "Upozorenje: promijenjena je vrsta printera."
#. MSG_UNLOAD_SUCCESSFUL c=20 r=2
#: ../../Firmware/Marlin_main.cpp:3747
msgid "Was filament unload successful?"
msgstr "Je li praznjenje fil. bilo uspjesno?"
#. MSG_SELFTEST_WIRINGERROR c=18
#: ../../Firmware/messages.c:100 ../../Firmware/ultralcd.cpp:8037
#: ../../Firmware/ultralcd.cpp:8041 ../../Firmware/ultralcd.cpp:8061
#: ../../Firmware/ultralcd.cpp:8067 ../../Firmware/ultralcd.cpp:8091
msgid "Wiring error"
msgstr "Greska u ozicenju"
#. MSG_WIZARD c=17
#: ../../Firmware/ultralcd.cpp:5755
msgid "Wizard"
msgstr "Carobnjak"
#. MSG_X_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:5070
msgid "X-correct:"
msgstr "X-ispravan:"
#. MSG_XFLASH
#: ../../Firmware/ultralcd.cpp:6663
msgid "XFLASH init"
msgstr ""
#. MSG_XYZ_DETAILS c=18
#: ../../Firmware/ultralcd.cpp:2029
msgid "XYZ cal. details"
msgstr "XYZ detalji kal"
#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_EXTREME c=20 r=8
#: ../../Firmware/ultralcd.cpp:3735
msgid "XYZ calibration all right. Skew will be corrected automatically."
msgstr "XYZ kalibracija u redu. Iskrivljenost ce se automatski ispraviti."
#. MSG_BED_SKEW_OFFSET_DETECTION_SKEW_MILD c=20 r=8
#: ../../Firmware/ultralcd.cpp:3732
msgid "XYZ calibration all right. X/Y axes are slightly skewed. Good job!"
msgstr "XYZ kalibracija je u redu. Osi X/Y su malo nagnute. Bravo!"
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_BOTH_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3713
msgid "XYZ calibration compromised. Front calibration points not reachable."
msgstr ""
"XYZ kalibracija je ugrozena. Prednje kalibracijske tocke nisu dostupne."
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_LEFT_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3719
msgid ""
"XYZ calibration compromised. Left front calibration point not reachable."
msgstr ""
#. MSG_BED_SKEW_OFFSET_DETECTION_WARNING_FRONT_RIGHT_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3716
msgid ""
"XYZ calibration compromised. Right front calibration point not reachable."
msgstr ""
"XYZ kalibracija je ugrozena. Desna prednja tocka kalibracije nije dostupna."
#. MSG_BED_SKEW_OFFSET_DETECTION_POINT_NOT_FOUND c=20 r=6
#: ../../Firmware/ultralcd.cpp:3695
msgid "XYZ calibration failed. Bed calibration point was not found."
msgstr ""
"XYZ kalibracija nije uspjela. Tocka kalibracije podloga nije pronadena."
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_BOTH_FAR c=20 r=6
#: ../../Firmware/ultralcd.cpp:3701
msgid "XYZ calibration failed. Front calibration points not reachable."
msgstr ""
"XYZ kalibracija nije uspjela. Prednje kalibracijske tocke nisu dostupne."
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_LEFT_FAR c=20 r=8
#: ../../Firmware/ultralcd.cpp:3707
msgid "XYZ calibration failed. Left front calibration point not reachable."
msgstr ""
#. MSG_BED_SKEW_OFFSET_DETECTION_FITTING_FAILED c=20 r=8
#: ../../Firmware/messages.c:18 ../../Firmware/ultralcd.cpp:3698
#: ../../Firmware/ultralcd.cpp:3726
msgid "XYZ calibration failed. Please consult the manual."
msgstr "XYZ kalibracija nije uspjela. Molimo pogledajte prirucnik."
#. MSG_BED_SKEW_OFFSET_DETECTION_FAILED_FRONT_RIGHT_FAR c=20 r=6
#: ../../Firmware/ultralcd.cpp:3704
msgid "XYZ calibration failed. Right front calibration point not reachable."
msgstr ""
"XYZ kalibracija nije uspjela. Desna prednja tocka kalibracije nije dostupna."
#. MSG_BED_SKEW_OFFSET_DETECTION_PERFECT c=20 r=8
#: ../../Firmware/ultralcd.cpp:3729
msgid "XYZ calibration ok. X/Y axes are perpendicular. Congratulations!"
msgstr "XYZ kalibracija u redu. Osi X/Y su okomite. Cestitamo!"
#. MSG_Y_DIST_FROM_MIN c=20
#: ../../Firmware/ultralcd.cpp:2832
msgid "Y distance from min"
msgstr "Y distanca od min"
#. MSG_Y_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:5071
msgid "Y-correct:"
msgstr "Y-ispravan:"
#. MSG_YES c=4
#: ../../Firmware/messages.c:125 ../../Firmware/ultralcd.cpp:2553
#: ../../Firmware/ultralcd.cpp:3152 ../../Firmware/ultralcd.cpp:3547
#: ../../Firmware/ultralcd.cpp:3641 ../../Firmware/ultralcd.cpp:3645
#: ../../Firmware/ultralcd.cpp:5645 ../../Firmware/ultralcd.cpp:7048
msgid "Yes"
msgstr "Da"
#. MSG_FW_VERSION_ALPHA c=20 r=8
#: ../../Firmware/Marlin_main.cpp:850
msgid ""
"You are using firmware alpha version. This is development version. Using "
"this version is not recommended and may cause printer damage."
msgstr ""
#. MSG_FW_VERSION_BETA c=20 r=8
#: ../../Firmware/Marlin_main.cpp:851
msgid ""
"You are using firmware beta version. This is development version. Using this "
"version is not recommended and may cause printer damage."
msgstr ""
#. MSG_WIZARD_QUIT c=20 r=8
#: ../../Firmware/messages.c:122 ../../Firmware/ultralcd.cpp:5047
msgid "You can always resume the Wizard from Calibration -> Wizard."
msgstr "Carobnjak uvijek mozete nastaviti iz Kalibracija -> Carobnjak."
#. MSG_Z_CORRECTION c=13
#: ../../Firmware/ultralcd.cpp:5072
msgid "Z-correct:"
msgstr "Z-ispravan:"
#. MSG_Z_PROBE_NR c=14
#: ../../Firmware/messages.c:151 ../../Firmware/ultralcd.cpp:6902
msgid "Z-probe nr."
msgstr "Z-sonda br."
#. MSG_MEASURED_OFFSET c=20
#: ../../Firmware/ultralcd.cpp:2903
msgid "[0;0] point offset"
msgstr "[0;0] razmak tocke"
#. MSG_PRESS c=20 r=2
#: ../../Firmware/ultralcd.cpp:2475
msgid "and press the knob"
msgstr "i pritisnite gumb"
#: ../../Firmware/ultralcd.cpp:8620
msgid "monitoring or hold"
msgstr ""
#: ../../Firmware/ultralcd.cpp:8621
msgid "the knob to continue"
msgstr ""
#. MSG_TO_LOAD_FIL c=20
#: ../../Firmware/ultralcd.cpp:2127
msgid "to load filament"
msgstr "da napuni filament"
#. MSG_TO_UNLOAD_FIL c=20
#: ../../Firmware/ultralcd.cpp:2131
msgid "to unload filament"
msgstr "da isprazni filament"
#. MSG_UNKNOWN c=13
#: ../../Firmware/ultralcd.cpp:1995
msgid "unknown"
msgstr "nepoznato"
#. MSG_IR_UNKNOWN c=18
#: ../../Firmware/fsensor.cpp:182 ../../Firmware/messages.c:167
msgid "unknown state"
msgstr "nepoznato stanje"
#. MSG_REFRESH c=18
#: ../../Firmware/messages.c:85 ../../Firmware/ultralcd.cpp:7133
#: ../../Firmware/ultralcd.cpp:7136
msgid "🔃Refresh"
msgstr "🔃Osvjeziti"
Reference in New Issue View Git Blame Copy Permalink