eea755496b
Timing functions (millis, micros and delay) replaced in whole source, defined in Marlin.h. This commit enables original implementation (SYSTEM_TIMER_2 undefined) Verified with passed complete wizard process.
546 lines
18 KiB
C++
546 lines
18 KiB
C++
//! @file
|
|
|
|
#include "Marlin.h"
|
|
|
|
#include "fsensor.h"
|
|
#include <avr/pgmspace.h>
|
|
#include "pat9125.h"
|
|
#include "stepper.h"
|
|
#include "planner.h"
|
|
#include "fastio.h"
|
|
#include "io_atmega2560.h"
|
|
#include "cmdqueue.h"
|
|
#include "ultralcd.h"
|
|
#include "ConfigurationStore.h"
|
|
#include "mmu.h"
|
|
|
|
//! @name Basic parameters
|
|
//! @{
|
|
#define FSENSOR_CHUNK_LEN 0.64F //!< filament sensor chunk length 0.64mm
|
|
#define FSENSOR_ERR_MAX 17 //!< filament sensor maximum error count for runout detection
|
|
//! @}
|
|
|
|
//! @name Optical quality measurement parameters
|
|
//! @{
|
|
#define FSENSOR_OQ_MAX_ES 6 //!< maximum error sum while loading (length ~64mm = 100chunks)
|
|
#define FSENSOR_OQ_MAX_EM 2 //!< maximum error counter value while loading
|
|
#define FSENSOR_OQ_MIN_YD 2 //!< minimum yd per chunk (applied to avg value)
|
|
#define FSENSOR_OQ_MAX_YD 200 //!< maximum yd per chunk (applied to avg value)
|
|
#define FSENSOR_OQ_MAX_PD 4 //!< maximum positive deviation (= yd_max/yd_avg)
|
|
#define FSENSOR_OQ_MAX_ND 5 //!< maximum negative deviation (= yd_avg/yd_min)
|
|
#define FSENSOR_OQ_MAX_SH 13 //!< maximum shutter value
|
|
//! @}
|
|
|
|
const char ERRMSG_PAT9125_NOT_RESP[] PROGMEM = "PAT9125 not responding (%d)!\n";
|
|
|
|
// PJ7 can not be used (does not have PinChangeInterrupt possibility)
|
|
#define FSENSOR_INT_PIN 75 //!< filament sensor interrupt pin PJ4
|
|
#define FSENSOR_INT_PIN_MASK 0x10 //!< filament sensor interrupt pin mask (bit4)
|
|
#define FSENSOR_INT_PIN_PIN_REG PINJ // PIN register @ PJ4
|
|
#define FSENSOR_INT_PIN_VECT PCINT1_vect // PinChange ISR @ PJ4
|
|
#define FSENSOR_INT_PIN_PCMSK_REG PCMSK1 // PinChangeMaskRegister @ PJ4
|
|
#define FSENSOR_INT_PIN_PCMSK_BIT PCINT13 // PinChange Interrupt / PinChange Enable Mask @ PJ4
|
|
#define FSENSOR_INT_PIN_PCICR_BIT PCIE1 // PinChange Interrupt Enable / Flag @ PJ4
|
|
|
|
//uint8_t fsensor_int_pin = FSENSOR_INT_PIN;
|
|
uint8_t fsensor_int_pin_old = 0;
|
|
int16_t fsensor_chunk_len = 0;
|
|
|
|
//! enabled = initialized and sampled every chunk event
|
|
bool fsensor_enabled = true;
|
|
//! runout watching is done in fsensor_update (called from main loop)
|
|
bool fsensor_watch_runout = true;
|
|
//! not responding - is set if any communication error occurred during initialization or readout
|
|
bool fsensor_not_responding = false;
|
|
//! printing saved
|
|
bool fsensor_printing_saved = false;
|
|
//! enable/disable quality meassurement
|
|
bool fsensor_oq_meassure_enabled = false;
|
|
|
|
//! number of errors, updated in ISR
|
|
uint8_t fsensor_err_cnt = 0;
|
|
//! variable for accumulating step count (updated callbacks from stepper and ISR)
|
|
int16_t fsensor_st_cnt = 0;
|
|
//! last dy value from pat9125 sensor (used in ISR)
|
|
int16_t fsensor_dy_old = 0;
|
|
|
|
//! log flag: 0=log disabled, 1=log enabled
|
|
uint8_t fsensor_log = 1;
|
|
|
|
|
|
//! @name filament autoload variables
|
|
//! @{
|
|
|
|
//! autoload feature enabled
|
|
bool fsensor_autoload_enabled = true;
|
|
//! autoload watching enable/disable flag
|
|
bool fsensor_watch_autoload = false;
|
|
//
|
|
uint16_t fsensor_autoload_y;
|
|
//
|
|
uint8_t fsensor_autoload_c;
|
|
//
|
|
uint32_t fsensor_autoload_last_millis;
|
|
//
|
|
uint8_t fsensor_autoload_sum;
|
|
//! @}
|
|
|
|
|
|
//! @name filament optical quality measurement variables
|
|
//! @{
|
|
|
|
//! Measurement enable/disable flag
|
|
bool fsensor_oq_meassure = false;
|
|
//! skip-chunk counter, for accurate measurement is necessary to skip first chunk...
|
|
uint8_t fsensor_oq_skipchunk;
|
|
//! number of samples from start of measurement
|
|
uint8_t fsensor_oq_samples;
|
|
//! sum of steps in positive direction movements
|
|
uint16_t fsensor_oq_st_sum;
|
|
//! sum of deltas in positive direction movements
|
|
uint16_t fsensor_oq_yd_sum;
|
|
//! sum of errors during measurement
|
|
uint16_t fsensor_oq_er_sum;
|
|
//! max error counter value during measurement
|
|
uint8_t fsensor_oq_er_max;
|
|
//! minimum delta value
|
|
int16_t fsensor_oq_yd_min;
|
|
//! maximum delta value
|
|
int16_t fsensor_oq_yd_max;
|
|
//! sum of shutter value
|
|
uint16_t fsensor_oq_sh_sum;
|
|
//! @}
|
|
|
|
void fsensor_stop_and_save_print(void)
|
|
{
|
|
printf_P(PSTR("fsensor_stop_and_save_print\n"));
|
|
stop_and_save_print_to_ram(0, 0); //XYZE - no change
|
|
}
|
|
|
|
void fsensor_restore_print_and_continue(void)
|
|
{
|
|
printf_P(PSTR("fsensor_restore_print_and_continue\n"));
|
|
fsensor_watch_runout = true;
|
|
fsensor_err_cnt = 0;
|
|
restore_print_from_ram_and_continue(0); //XYZ = orig, E - no change
|
|
}
|
|
|
|
void fsensor_init(void)
|
|
{
|
|
uint8_t pat9125 = pat9125_init();
|
|
printf_P(PSTR("PAT9125_init:%hhu\n"), pat9125);
|
|
uint8_t fsensor = eeprom_read_byte((uint8_t*)EEPROM_FSENSOR);
|
|
fsensor_autoload_enabled=eeprom_read_byte((uint8_t*)EEPROM_FSENS_AUTOLOAD_ENABLED);
|
|
uint8_t oq_meassure_enabled = eeprom_read_byte((uint8_t*)EEPROM_FSENS_OQ_MEASS_ENABLED);
|
|
fsensor_oq_meassure_enabled = (oq_meassure_enabled == 1)?true:false;
|
|
fsensor_chunk_len = (int16_t)(FSENSOR_CHUNK_LEN * cs.axis_steps_per_unit[E_AXIS]);
|
|
|
|
if (!pat9125)
|
|
{
|
|
fsensor = 0; //disable sensor
|
|
fsensor_not_responding = true;
|
|
}
|
|
else
|
|
fsensor_not_responding = false;
|
|
if (fsensor)
|
|
fsensor_enable();
|
|
else
|
|
fsensor_disable();
|
|
printf_P(PSTR("FSensor %S\n"), (fsensor_enabled?PSTR("ENABLED"):PSTR("DISABLED\n")));
|
|
}
|
|
|
|
bool fsensor_enable(void)
|
|
{
|
|
if (mmu_enabled == false) { //filament sensor is pat9125, enable only if it is working
|
|
uint8_t pat9125 = pat9125_init();
|
|
printf_P(PSTR("PAT9125_init:%hhu\n"), pat9125);
|
|
if (pat9125)
|
|
fsensor_not_responding = false;
|
|
else
|
|
fsensor_not_responding = true;
|
|
fsensor_enabled = pat9125 ? true : false;
|
|
fsensor_watch_runout = true;
|
|
fsensor_oq_meassure = false;
|
|
fsensor_err_cnt = 0;
|
|
fsensor_dy_old = 0;
|
|
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, fsensor_enabled ? 0x01 : 0x00);
|
|
FSensorStateMenu = fsensor_enabled ? 1 : 0;
|
|
}
|
|
else //filament sensor is FINDA, always enable
|
|
{
|
|
fsensor_enabled = true;
|
|
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, 0x01);
|
|
FSensorStateMenu = 1;
|
|
}
|
|
return fsensor_enabled;
|
|
}
|
|
|
|
void fsensor_disable(void)
|
|
{
|
|
fsensor_enabled = false;
|
|
eeprom_update_byte((uint8_t*)EEPROM_FSENSOR, 0x00);
|
|
FSensorStateMenu = 0;
|
|
}
|
|
|
|
void fsensor_autoload_set(bool State)
|
|
{
|
|
if (!State) fsensor_autoload_check_stop();
|
|
fsensor_autoload_enabled = State;
|
|
eeprom_update_byte((unsigned char *)EEPROM_FSENS_AUTOLOAD_ENABLED, fsensor_autoload_enabled);
|
|
}
|
|
|
|
void pciSetup(byte pin)
|
|
{
|
|
// !!! "digitalPinTo?????bit()" does not provide the correct results for some MCU pins
|
|
*digitalPinToPCMSK(pin) |= bit (digitalPinToPCMSKbit(pin)); // enable pin
|
|
PCIFR |= bit (digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
|
|
PCICR |= bit (digitalPinToPCICRbit(pin)); // enable interrupt for the group
|
|
}
|
|
|
|
void fsensor_autoload_check_start(void)
|
|
{
|
|
// puts_P(_N("fsensor_autoload_check_start\n"));
|
|
if (!fsensor_enabled) return;
|
|
if (!fsensor_autoload_enabled) return;
|
|
if (fsensor_watch_autoload) return;
|
|
if (!pat9125_update_y()) //update sensor
|
|
{
|
|
fsensor_disable();
|
|
fsensor_not_responding = true;
|
|
fsensor_watch_autoload = false;
|
|
printf_P(ERRMSG_PAT9125_NOT_RESP, 3);
|
|
return;
|
|
}
|
|
puts_P(_N("fsensor_autoload_check_start - autoload ENABLED\n"));
|
|
fsensor_autoload_y = pat9125_y; //save current y value
|
|
fsensor_autoload_c = 0; //reset number of changes counter
|
|
fsensor_autoload_sum = 0;
|
|
fsensor_autoload_last_millis = _millis();
|
|
fsensor_watch_runout = false;
|
|
fsensor_watch_autoload = true;
|
|
fsensor_err_cnt = 0;
|
|
}
|
|
|
|
void fsensor_autoload_check_stop(void)
|
|
{
|
|
// puts_P(_N("fsensor_autoload_check_stop\n"));
|
|
if (!fsensor_enabled) return;
|
|
// puts_P(_N("fsensor_autoload_check_stop 1\n"));
|
|
if (!fsensor_autoload_enabled) return;
|
|
// puts_P(_N("fsensor_autoload_check_stop 2\n"));
|
|
if (!fsensor_watch_autoload) return;
|
|
puts_P(_N("fsensor_autoload_check_stop - autoload DISABLED\n"));
|
|
fsensor_autoload_sum = 0;
|
|
fsensor_watch_autoload = false;
|
|
fsensor_watch_runout = true;
|
|
fsensor_err_cnt = 0;
|
|
}
|
|
|
|
bool fsensor_check_autoload(void)
|
|
{
|
|
if (!fsensor_enabled) return false;
|
|
if (!fsensor_autoload_enabled) return false;
|
|
if (!fsensor_watch_autoload)
|
|
{
|
|
fsensor_autoload_check_start();
|
|
return false;
|
|
}
|
|
#if 0
|
|
uint8_t fsensor_autoload_c_old = fsensor_autoload_c;
|
|
#endif
|
|
if ((_millis() - fsensor_autoload_last_millis) < 25) return false;
|
|
fsensor_autoload_last_millis = _millis();
|
|
if (!pat9125_update_y()) //update sensor
|
|
{
|
|
fsensor_disable();
|
|
fsensor_not_responding = true;
|
|
printf_P(ERRMSG_PAT9125_NOT_RESP, 2);
|
|
return false;
|
|
}
|
|
int16_t dy = pat9125_y - fsensor_autoload_y;
|
|
if (dy) //? dy value is nonzero
|
|
{
|
|
if (dy > 0) //? delta-y value is positive (inserting)
|
|
{
|
|
fsensor_autoload_sum += dy;
|
|
fsensor_autoload_c += 3; //increment change counter by 3
|
|
}
|
|
else if (fsensor_autoload_c > 1)
|
|
fsensor_autoload_c -= 2; //decrement change counter by 2
|
|
fsensor_autoload_y = pat9125_y; //save current value
|
|
}
|
|
else if (fsensor_autoload_c > 0)
|
|
fsensor_autoload_c--;
|
|
if (fsensor_autoload_c == 0) fsensor_autoload_sum = 0;
|
|
#if 0
|
|
puts_P(_N("fsensor_check_autoload\n"));
|
|
if (fsensor_autoload_c != fsensor_autoload_c_old)
|
|
printf_P(PSTR("fsensor_check_autoload dy=%d c=%d sum=%d\n"), dy, fsensor_autoload_c, fsensor_autoload_sum);
|
|
#endif
|
|
// if ((fsensor_autoload_c >= 15) && (fsensor_autoload_sum > 30))
|
|
if ((fsensor_autoload_c >= 12) && (fsensor_autoload_sum > 20))
|
|
{
|
|
// puts_P(_N("fsensor_check_autoload = true !!!\n"));
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
void fsensor_oq_meassure_set(bool State)
|
|
{
|
|
fsensor_oq_meassure_enabled = State;
|
|
eeprom_update_byte((unsigned char *)EEPROM_FSENS_OQ_MEASS_ENABLED, fsensor_oq_meassure_enabled);
|
|
}
|
|
|
|
void fsensor_oq_meassure_start(uint8_t skip)
|
|
{
|
|
if (!fsensor_enabled) return;
|
|
if (!fsensor_oq_meassure_enabled) return;
|
|
printf_P(PSTR("fsensor_oq_meassure_start\n"));
|
|
fsensor_oq_skipchunk = skip;
|
|
fsensor_oq_samples = 0;
|
|
fsensor_oq_st_sum = 0;
|
|
fsensor_oq_yd_sum = 0;
|
|
fsensor_oq_er_sum = 0;
|
|
fsensor_oq_er_max = 0;
|
|
fsensor_oq_yd_min = FSENSOR_OQ_MAX_YD;
|
|
fsensor_oq_yd_max = 0;
|
|
fsensor_oq_sh_sum = 0;
|
|
pat9125_update();
|
|
pat9125_y = 0;
|
|
fsensor_watch_runout = false;
|
|
fsensor_oq_meassure = true;
|
|
}
|
|
|
|
void fsensor_oq_meassure_stop(void)
|
|
{
|
|
if (!fsensor_enabled) return;
|
|
if (!fsensor_oq_meassure_enabled) return;
|
|
printf_P(PSTR("fsensor_oq_meassure_stop, %hhu samples\n"), fsensor_oq_samples);
|
|
printf_P(_N(" st_sum=%u yd_sum=%u er_sum=%u er_max=%hhu\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max);
|
|
printf_P(_N(" yd_min=%u yd_max=%u yd_avg=%u sh_avg=%u\n"), fsensor_oq_yd_min, fsensor_oq_yd_max, (uint16_t)((uint32_t)fsensor_oq_yd_sum * fsensor_chunk_len / fsensor_oq_st_sum), (uint16_t)(fsensor_oq_sh_sum / fsensor_oq_samples));
|
|
fsensor_oq_meassure = false;
|
|
fsensor_watch_runout = true;
|
|
fsensor_err_cnt = 0;
|
|
}
|
|
|
|
const char _OK[] PROGMEM = "OK";
|
|
const char _NG[] PROGMEM = "NG!";
|
|
|
|
bool fsensor_oq_result(void)
|
|
{
|
|
if (!fsensor_enabled) return true;
|
|
if (!fsensor_oq_meassure_enabled) return true;
|
|
printf_P(_N("fsensor_oq_result\n"));
|
|
bool res_er_sum = (fsensor_oq_er_sum <= FSENSOR_OQ_MAX_ES);
|
|
printf_P(_N(" er_sum = %u %S\n"), fsensor_oq_er_sum, (res_er_sum?_OK:_NG));
|
|
bool res_er_max = (fsensor_oq_er_max <= FSENSOR_OQ_MAX_EM);
|
|
printf_P(_N(" er_max = %hhu %S\n"), fsensor_oq_er_max, (res_er_max?_OK:_NG));
|
|
uint8_t yd_avg = ((uint32_t)fsensor_oq_yd_sum * fsensor_chunk_len / fsensor_oq_st_sum);
|
|
bool res_yd_avg = (yd_avg >= FSENSOR_OQ_MIN_YD) && (yd_avg <= FSENSOR_OQ_MAX_YD);
|
|
printf_P(_N(" yd_avg = %hhu %S\n"), yd_avg, (res_yd_avg?_OK:_NG));
|
|
bool res_yd_max = (fsensor_oq_yd_max <= (yd_avg * FSENSOR_OQ_MAX_PD));
|
|
printf_P(_N(" yd_max = %u %S\n"), fsensor_oq_yd_max, (res_yd_max?_OK:_NG));
|
|
bool res_yd_min = (fsensor_oq_yd_min >= (yd_avg / FSENSOR_OQ_MAX_ND));
|
|
printf_P(_N(" yd_min = %u %S\n"), fsensor_oq_yd_min, (res_yd_min?_OK:_NG));
|
|
|
|
uint16_t yd_dev = (fsensor_oq_yd_max - yd_avg) + (yd_avg - fsensor_oq_yd_min);
|
|
printf_P(_N(" yd_dev = %u\n"), yd_dev);
|
|
|
|
uint16_t yd_qua = 10 * yd_avg / (yd_dev + 1);
|
|
printf_P(_N(" yd_qua = %u %S\n"), yd_qua, ((yd_qua >= 8)?_OK:_NG));
|
|
|
|
uint8_t sh_avg = (fsensor_oq_sh_sum / fsensor_oq_samples);
|
|
bool res_sh_avg = (sh_avg <= FSENSOR_OQ_MAX_SH);
|
|
if (yd_qua >= 8) res_sh_avg = true;
|
|
|
|
printf_P(_N(" sh_avg = %hhu %S\n"), sh_avg, (res_sh_avg?_OK:_NG));
|
|
bool res = res_er_sum && res_er_max && res_yd_avg && res_yd_max && res_yd_min && res_sh_avg;
|
|
printf_P(_N("fsensor_oq_result %S\n"), (res?_OK:_NG));
|
|
return res;
|
|
}
|
|
|
|
ISR(FSENSOR_INT_PIN_VECT)
|
|
{
|
|
if (mmu_enabled) return;
|
|
if (!((fsensor_int_pin_old ^ FSENSOR_INT_PIN_PIN_REG) & FSENSOR_INT_PIN_MASK)) return;
|
|
fsensor_int_pin_old = FSENSOR_INT_PIN_PIN_REG;
|
|
static bool _lock = false;
|
|
if (_lock) return;
|
|
_lock = true;
|
|
int st_cnt = fsensor_st_cnt;
|
|
fsensor_st_cnt = 0;
|
|
sei();
|
|
uint8_t old_err_cnt = fsensor_err_cnt;
|
|
uint8_t pat9125_res = fsensor_oq_meassure?pat9125_update():pat9125_update_y();
|
|
if (!pat9125_res)
|
|
{
|
|
fsensor_disable();
|
|
fsensor_not_responding = true;
|
|
printf_P(ERRMSG_PAT9125_NOT_RESP, 1);
|
|
}
|
|
if (st_cnt != 0)
|
|
{ //movement
|
|
if (st_cnt > 0) //positive movement
|
|
{
|
|
if (pat9125_y < 0)
|
|
{
|
|
if (fsensor_err_cnt)
|
|
fsensor_err_cnt += 2;
|
|
else
|
|
fsensor_err_cnt++;
|
|
}
|
|
else if (pat9125_y > 0)
|
|
{
|
|
if (fsensor_err_cnt)
|
|
fsensor_err_cnt--;
|
|
}
|
|
else //(pat9125_y == 0)
|
|
if (((fsensor_dy_old <= 0) || (fsensor_err_cnt)) && (st_cnt > (fsensor_chunk_len >> 1)))
|
|
fsensor_err_cnt++;
|
|
if (fsensor_oq_meassure)
|
|
{
|
|
if (fsensor_oq_skipchunk)
|
|
{
|
|
fsensor_oq_skipchunk--;
|
|
fsensor_err_cnt = 0;
|
|
}
|
|
else
|
|
{
|
|
if (st_cnt == fsensor_chunk_len)
|
|
{
|
|
if (pat9125_y > 0) if (fsensor_oq_yd_min > pat9125_y) fsensor_oq_yd_min = (fsensor_oq_yd_min + pat9125_y) / 2;
|
|
if (pat9125_y >= 0) if (fsensor_oq_yd_max < pat9125_y) fsensor_oq_yd_max = (fsensor_oq_yd_max + pat9125_y) / 2;
|
|
}
|
|
fsensor_oq_samples++;
|
|
fsensor_oq_st_sum += st_cnt;
|
|
if (pat9125_y > 0) fsensor_oq_yd_sum += pat9125_y;
|
|
if (fsensor_err_cnt > old_err_cnt)
|
|
fsensor_oq_er_sum += (fsensor_err_cnt - old_err_cnt);
|
|
if (fsensor_oq_er_max < fsensor_err_cnt)
|
|
fsensor_oq_er_max = fsensor_err_cnt;
|
|
fsensor_oq_sh_sum += pat9125_s;
|
|
}
|
|
}
|
|
}
|
|
else //negative movement
|
|
{
|
|
}
|
|
}
|
|
else
|
|
{ //no movement
|
|
}
|
|
|
|
#ifdef DEBUG_FSENSOR_LOG
|
|
if (fsensor_log)
|
|
{
|
|
printf_P(_N("FSENSOR cnt=%d dy=%d err=%hhu %S\n"), st_cnt, pat9125_y, fsensor_err_cnt, (fsensor_err_cnt > old_err_cnt)?_N("NG!"):_N("OK"));
|
|
if (fsensor_oq_meassure) printf_P(_N("FSENSOR st_sum=%u yd_sum=%u er_sum=%u er_max=%hhu yd_max=%u\n"), fsensor_oq_st_sum, fsensor_oq_yd_sum, fsensor_oq_er_sum, fsensor_oq_er_max, fsensor_oq_yd_max);
|
|
}
|
|
#endif //DEBUG_FSENSOR_LOG
|
|
|
|
fsensor_dy_old = pat9125_y;
|
|
pat9125_y = 0;
|
|
|
|
_lock = false;
|
|
return;
|
|
}
|
|
|
|
void fsensor_st_block_begin(block_t* bl)
|
|
{
|
|
if (!fsensor_enabled) return;
|
|
if (((fsensor_st_cnt > 0) && (bl->direction_bits & 0x8)) ||
|
|
((fsensor_st_cnt < 0) && !(bl->direction_bits & 0x8)))
|
|
{
|
|
// !!! bit toggling (PINxn <- 1) (for PinChangeInterrupt) does not work for some MCU pins
|
|
if (PIN_GET(FSENSOR_INT_PIN)) {PIN_VAL(FSENSOR_INT_PIN, LOW);}
|
|
else {PIN_VAL(FSENSOR_INT_PIN, HIGH);}
|
|
}
|
|
}
|
|
|
|
void fsensor_st_block_chunk(block_t* bl, int cnt)
|
|
{
|
|
if (!fsensor_enabled) return;
|
|
fsensor_st_cnt += (bl->direction_bits & 0x8)?-cnt:cnt;
|
|
if ((fsensor_st_cnt >= fsensor_chunk_len) || (fsensor_st_cnt <= -fsensor_chunk_len))
|
|
{
|
|
// !!! bit toggling (PINxn <- 1) (for PinChangeInterrupt) does not work for some MCU pins
|
|
if (PIN_GET(FSENSOR_INT_PIN)) {PIN_VAL(FSENSOR_INT_PIN, LOW);}
|
|
else {PIN_VAL(FSENSOR_INT_PIN, HIGH);}
|
|
}
|
|
}
|
|
|
|
//! @brief filament sensor update (perform M600 on filament runout)
|
|
//!
|
|
//! Works only if filament sensor is enabled.
|
|
//! When the filament sensor error count is larger then FSENSOR_ERR_MAX, pauses print, tries to move filament back and forth.
|
|
//! If there is still no plausible signal from filament sensor plans M600 (Filament change).
|
|
void fsensor_update(void)
|
|
{
|
|
if (fsensor_enabled && fsensor_watch_runout && (fsensor_err_cnt > FSENSOR_ERR_MAX))
|
|
{
|
|
bool autoload_enabled_tmp = fsensor_autoload_enabled;
|
|
fsensor_autoload_enabled = false;
|
|
bool oq_meassure_enabled_tmp = fsensor_oq_meassure_enabled;
|
|
fsensor_oq_meassure_enabled = true;
|
|
|
|
fsensor_stop_and_save_print();
|
|
|
|
fsensor_err_cnt = 0;
|
|
fsensor_oq_meassure_start(0);
|
|
|
|
enquecommand_front_P((PSTR("G1 E-3 F200")));
|
|
process_commands();
|
|
KEEPALIVE_STATE(IN_HANDLER);
|
|
cmdqueue_pop_front();
|
|
st_synchronize();
|
|
|
|
enquecommand_front_P((PSTR("G1 E3 F200")));
|
|
process_commands();
|
|
KEEPALIVE_STATE(IN_HANDLER);
|
|
cmdqueue_pop_front();
|
|
st_synchronize();
|
|
|
|
uint8_t err_cnt = fsensor_err_cnt;
|
|
fsensor_oq_meassure_stop();
|
|
|
|
bool err = false;
|
|
err |= (err_cnt > 1);
|
|
|
|
err |= (fsensor_oq_er_sum > 2);
|
|
err |= (fsensor_oq_yd_sum < (4 * FSENSOR_OQ_MIN_YD));
|
|
|
|
if (!err)
|
|
{
|
|
printf_P(PSTR("fsensor_err_cnt = 0\n"));
|
|
fsensor_restore_print_and_continue();
|
|
}
|
|
else
|
|
{
|
|
printf_P(PSTR("fsensor_update - M600\n"));
|
|
eeprom_update_byte((uint8_t*)EEPROM_FERROR_COUNT, eeprom_read_byte((uint8_t*)EEPROM_FERROR_COUNT) + 1);
|
|
eeprom_update_word((uint16_t*)EEPROM_FERROR_COUNT_TOT, eeprom_read_word((uint16_t*)EEPROM_FERROR_COUNT_TOT) + 1);
|
|
enquecommand_front_P(PSTR("FSENSOR_RECOVER"));
|
|
enquecommand_front_P((PSTR("M600")));
|
|
fsensor_watch_runout = false;
|
|
}
|
|
fsensor_autoload_enabled = autoload_enabled_tmp;
|
|
fsensor_oq_meassure_enabled = oq_meassure_enabled_tmp;
|
|
}
|
|
}
|
|
|
|
void fsensor_setup_interrupt(void)
|
|
{
|
|
|
|
pinMode(FSENSOR_INT_PIN, OUTPUT);
|
|
digitalWrite(FSENSOR_INT_PIN, LOW);
|
|
fsensor_int_pin_old = 0;
|
|
|
|
//pciSetup(FSENSOR_INT_PIN);
|
|
// !!! "pciSetup()" does not provide the correct results for some MCU pins
|
|
// so interrupt registers settings:
|
|
FSENSOR_INT_PIN_PCMSK_REG |= bit(FSENSOR_INT_PIN_PCMSK_BIT); // enable corresponding PinChangeInterrupt (individual pin)
|
|
PCIFR |= bit(FSENSOR_INT_PIN_PCICR_BIT); // clear previous occasional interrupt (set of pins)
|
|
PCICR |= bit(FSENSOR_INT_PIN_PCICR_BIT); // enable corresponding PinChangeInterrupt (set of pins)
|
|
}
|