Prusa-Firmware/Firmware/Dcodes.h
Robert Pelnar f2e9bdef24 Fsensor synchronization and triggering improved
Watchdog implemented (4s interval, triggered from manage_heater)
Stallguard sensitivity for XY decreased by 1
Extruder current adjusted to 5.5kg force
Build number = 111
2017-11-24 21:53:35 +01:00

23 lines
741 B
C

#ifndef DCODES_H
#define DCODES_H
extern void dcode__1(); //D-1 - Endless loop (to simulate deadlock)
extern void dcode_0(); //D0 - Reset
extern void dcode_1(); //D1 - Clear EEPROM
extern void dcode_2(); //D2 - Read/Write RAM
extern void dcode_3(); //D3 - Read/Write EEPROM
extern void dcode_4(); //D4 - Read/Write PIN
extern void dcode_5(); //D5 - Read/Write FLASH
extern void dcode_6(); //D6 - Read/Write external FLASH
extern void dcode_7(); //D7 - Read/Write Bootloader
extern void dcode_8(); //D8 - Read/Write PINDA
extern void dcode_10(); //D10 - XYZ calibration = OK
extern void dcode_12(); //D12 - Reset failstat counters
extern void dcode_2130(); //D2130 - TMC2130
extern void dcode_9125(); //D9125 - PAT9125
#endif //DCODES_H