3DPrinting/Prusa-Firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f9f9912fff
Prusa-Firmware/Firmware
History
bubnikv f9f9912fff Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 
Clean-up of some hard coded constants.
Fixed line edit error introduced in the preceding check-in.
Enable a high power mode when first booted up on a virgin RAMBo board.
2016-08-04 13:02:45 +02:00
..
variants Add files via upload 2016-07-28 15:19:23 +02:00
BlinkM.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
BlinkM.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
boards.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
cardreader.cpp Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
cardreader.h Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
Configuration_adv.h Reworked calculation of the trapezoidal ramps inside the planner. 2016-07-22 10:37:06 +02:00
Configuration.h Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 2016-08-04 13:02:45 +02:00
ConfigurationStore.cpp Improvement of baby stepping: 2016-08-02 12:19:17 +02:00
ConfigurationStore.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
digipot_mcp4451.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
dogm_font_data_marlin.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
dogm_lcd_implementation.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
DOGMbitmaps.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
fastio.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Firmware.ino MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Firmware.sublime-project Automatic bed calibration by searching the 3x3 point matrix. 2016-06-16 14:29:04 +02:00
langtool.php MK2 Firmware release. 2016-05-31 14:08:04 +02:00
langtool.pl Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 2016-08-04 13:02:45 +02:00
language_all.cpp Improvement of baby stepping: 2016-08-02 12:19:17 +02:00
language_all.h Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 2016-08-04 13:02:45 +02:00
language_cz.h Improvement of baby stepping: 2016-08-02 12:19:17 +02:00
language_en.h Improvement of baby stepping: 2016-08-02 12:19:17 +02:00
language_es.h Fixed ".." label when leaving a subdirectory. 2016-06-20 13:46:37 +02:00
language_it.h Fixed ".." label when leaving a subdirectory. 2016-06-20 13:46:37 +02:00
language_pl.h Fixed ".." label when leaving a subdirectory. 2016-06-20 13:46:37 +02:00
language.h Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 2016-08-04 13:02:45 +02:00
LiquidCrystal.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
LiquidCrystal.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Marlin_main.cpp Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 2016-08-04 13:02:45 +02:00
Marlin.h Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 2016-08-04 13:02:45 +02:00
MarlinSerial.cpp Removed support for DELTA, SCARA and BARICUDA. 2016-06-23 08:46:15 +02:00
MarlinSerial.h Removed support for DELTA, SCARA and BARICUDA. 2016-06-23 08:46:15 +02:00
mesh_bed_calibration.cpp Improvement of baby stepping: 2016-08-02 12:19:17 +02:00
mesh_bed_calibration.h Improvement of baby stepping: 2016-08-02 12:19:17 +02:00
mesh_bed_leveling.cpp Removed support for DELTA, SCARA and BARICUDA. 2016-06-23 08:46:15 +02:00
mesh_bed_leveling.h Automatic bed calibration by searching the 3x3 point matrix. 2016-06-16 14:29:04 +02:00
motion_control.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
motion_control.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
pins.h Removed support for DELTA, SCARA and BARICUDA. 2016-06-23 08:46:15 +02:00
planner.cpp Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 2016-08-04 13:02:45 +02:00
planner.h Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 2016-08-04 13:02:45 +02:00
qr_solve.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
qr_solve.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Sd2Card.cpp Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
Sd2Card.h Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
Sd2PinMap.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdBaseFile.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdBaseFile.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFatConfig.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFatStructs.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFatUtil.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFatUtil.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFile.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdFile.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdInfo.h Initial implementation of the Toshiba FlashAir support: 2016-07-21 10:48:08 +02:00
SdVolume.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
SdVolume.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Servo.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
Servo.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
speed_lookuptable.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
stepper.cpp Improvement of baby stepping: 2016-08-02 12:19:17 +02:00
stepper.h Removed the dual carriage code for readibility. 2016-07-19 10:57:18 +02:00
temperature.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
temperature.h Undo babystepping in Z before G28 / G80, if applied already. 2016-07-18 17:28:54 +02:00
thermistortables.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
ultralcd_implementation_hitachi_HD44780.h Show "Calibrating nth point" on the display when running G80 2016-08-02 15:08:34 +02:00
ultralcd_st7920_u8glib_rrd.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
ultralcd.cpp Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 2016-08-04 13:02:45 +02:00
ultralcd.h Fixed print stop: Now the printer will maintain a valid coordinate system during print stop, so it will not crash into the end stops. 2016-08-04 13:02:45 +02:00
util.cpp In addition to the firmware version number, store the "PRUSA3D" 2016-07-08 09:49:15 +02:00
util.h Improvement of baby stepping: 2016-08-02 12:19:17 +02:00
vector_3.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
vector_3.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00
watchdog.cpp MK2 Firmware release. 2016-05-31 14:08:04 +02:00
watchdog.h MK2 Firmware release. 2016-05-31 14:08:04 +02:00