3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
415877d79e
PrusaSlicer-NonPlainar/resources/localization/zh_tw/PrusaSlicer_zhtw.po

8011 lines
255 KiB
Plaintext
Raw Normal View History

Create PrusaSlicer_zhtw.po
2019-05-22 02:38:58 +00:00
msgid ""
msgstr ""
"Project-Id-Version: Slic3rPE\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2019-04-09 14:34+0200\n"
"PO-Revision-Date: 2019-05-22 10:35+0800\n"
"Last-Translator: Jiang Yue <maze1024@gmail.com> , patched traditional "
"chinese by Cheng-Hsien Ho <taksito@gmail.com>\n"
"Language-Team: \n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 2.2.3\n"
"X-Poedit-Basepath: ..\n"
"Plural-Forms: nplurals=1; plural=0;\n"
"X-Poedit-SourceCharset: UTF-8\n"
"X-Poedit-KeywordsList: L\n"
"X-Poedit-SearchPath-0: xs/src/libslic3r\n"
"X-Poedit-SearchPath-1: xs/xrc/slic3r/GUI\n"
"X-Poedit-SearchPath-2: xs/xrc/slic3r\n"
#: src/slic3r/GUI/AboutDialog.cpp:35
msgid "About Slic3r"
msgstr "關於Slic3r"
#: src/slic3r/GUI/AboutDialog.cpp:64 src/slic3r/GUI/MainFrame.cpp:52
msgid "Version"
msgstr "版本"
#: src/slic3r/GUI/BedShapeDialog.cpp:43
msgid "Shape"
msgstr "形狀"
#: src/slic3r/GUI/BedShapeDialog.cpp:51
msgid "Rectangular"
msgstr "矩形"
#: src/slic3r/GUI/BedShapeDialog.cpp:55
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:118 src/slic3r/GUI/Plater.cpp:136
#: src/slic3r/GUI/Tab.cpp:2185
msgid "Size"
msgstr "尺寸"
#: src/slic3r/GUI/BedShapeDialog.cpp:56
msgid "Size in X and Y of the rectangular plate."
msgstr "矩形框在X和Y方向的尺寸。"
#: src/slic3r/GUI/BedShapeDialog.cpp:62
msgid "Origin"
msgstr "原點"
#: src/slic3r/GUI/BedShapeDialog.cpp:63
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr "G-code 0,0 座標相對於矩形框左前角落的距離。"
#: src/slic3r/GUI/BedShapeDialog.cpp:67
msgid "Circular"
msgstr "圓形"
#: src/slic3r/GUI/BedShapeDialog.cpp:70 src/slic3r/GUI/ConfigWizard.cpp:111
#: src/slic3r/GUI/ConfigWizard.cpp:544 src/slic3r/GUI/ConfigWizard.cpp:558
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:115
#: src/slic3r/GUI/RammingChart.cpp:81 src/slic3r/GUI/WipeTowerDialog.cpp:84
#: src/libslic3r/PrintConfig.cpp:59 src/libslic3r/PrintConfig.cpp:66
#: src/libslic3r/PrintConfig.cpp:75 src/libslic3r/PrintConfig.cpp:209
#: src/libslic3r/PrintConfig.cpp:284 src/libslic3r/PrintConfig.cpp:292
#: src/libslic3r/PrintConfig.cpp:342 src/libslic3r/PrintConfig.cpp:352
#: src/libslic3r/PrintConfig.cpp:472 src/libslic3r/PrintConfig.cpp:483
#: src/libslic3r/PrintConfig.cpp:501 src/libslic3r/PrintConfig.cpp:679
#: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1226
#: src/libslic3r/PrintConfig.cpp:1244 src/libslic3r/PrintConfig.cpp:1262
#: src/libslic3r/PrintConfig.cpp:1314 src/libslic3r/PrintConfig.cpp:1324
#: src/libslic3r/PrintConfig.cpp:1445 src/libslic3r/PrintConfig.cpp:1453
#: src/libslic3r/PrintConfig.cpp:1494 src/libslic3r/PrintConfig.cpp:1502
#: src/libslic3r/PrintConfig.cpp:1512 src/libslic3r/PrintConfig.cpp:1520
#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1611
#: src/libslic3r/PrintConfig.cpp:1827 src/libslic3r/PrintConfig.cpp:1897
#: src/libslic3r/PrintConfig.cpp:1931 src/libslic3r/PrintConfig.cpp:2123
#: src/libslic3r/PrintConfig.cpp:2130 src/libslic3r/PrintConfig.cpp:2137
#: src/libslic3r/PrintConfig.cpp:2167 src/libslic3r/PrintConfig.cpp:2177
#: src/libslic3r/PrintConfig.cpp:2187 src/libslic3r/PrintConfig.cpp:2293
#: src/libslic3r/PrintConfig.cpp:2368 src/libslic3r/PrintConfig.cpp:2377
#: src/libslic3r/PrintConfig.cpp:2386 src/libslic3r/PrintConfig.cpp:2396
#: src/libslic3r/PrintConfig.cpp:2440 src/libslic3r/PrintConfig.cpp:2450
#: src/libslic3r/PrintConfig.cpp:2469 src/libslic3r/PrintConfig.cpp:2479
#: src/libslic3r/PrintConfig.cpp:2488 src/libslic3r/PrintConfig.cpp:2506
#: src/libslic3r/PrintConfig.cpp:2521 src/libslic3r/PrintConfig.cpp:2532
#: src/libslic3r/PrintConfig.cpp:2545 src/libslic3r/PrintConfig.cpp:2555
msgid "mm"
msgstr "毫米"
#: src/slic3r/GUI/BedShapeDialog.cpp:71 src/libslic3r/PrintConfig.cpp:676
msgid "Diameter"
msgstr "直徑"
#: src/slic3r/GUI/BedShapeDialog.cpp:72
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr "列印牀的直徑。假定原點 (0, 0) 位於中心。"
#: src/slic3r/GUI/BedShapeDialog.cpp:76 src/slic3r/GUI/GUI_Preview.cpp:239
#: src/libslic3r/GCode/PreviewData.cpp:175
msgid "Custom"
msgstr "自定義"
#: src/slic3r/GUI/BedShapeDialog.cpp:80
msgid "Load shape from STL..."
msgstr "從STL文件加載形狀..."
#: src/slic3r/GUI/BedShapeDialog.cpp:126
msgid "Settings"
msgstr "設置"
#: src/slic3r/GUI/BedShapeDialog.cpp:299
msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "選擇用來導入熱牀形狀的文件 (STL/OBJ/AMF/3MF/PRUSA):"
#: src/slic3r/GUI/BedShapeDialog.cpp:316 src/slic3r/GUI/GUI_ObjectList.cpp:1252
msgid "Error! "
msgstr "錯誤! "
#: src/slic3r/GUI/BedShapeDialog.cpp:325
msgid "The selected file contains no geometry."
msgstr "所選文件不包含任何幾何圖形。"
#: src/slic3r/GUI/BedShapeDialog.cpp:329
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr "所選文件包含多個不重合的區域。暫不支持這種類型。"
#: src/slic3r/GUI/BedShapeDialog.hpp:44 src/slic3r/GUI/ConfigWizard.cpp:507
msgid "Bed Shape"
msgstr "熱牀形狀"
#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr "從網絡查找"
#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr "地址"
#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr "主機名"
#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr "服務名稱"
#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr "OctoPrint 版本"
#: src/slic3r/GUI/BonjourDialog.cpp:218
msgid "Searching for devices"
msgstr "正在查找設備"
#: src/slic3r/GUI/BonjourDialog.cpp:225
msgid "Finished"
msgstr "已完成"
#: src/slic3r/GUI/ButtonsDescription.cpp:15
msgid "Buttons And Text Colors Description"
msgstr "按鈕和文本顏色描述"
#: src/slic3r/GUI/ButtonsDescription.cpp:40
msgid "Value is the same as the system value"
msgstr "值與系統值相同"
#: src/slic3r/GUI/ButtonsDescription.cpp:57
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr "值已更改, 不等於系統值或上次保存的預設值"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:17
msgid "Upgrade"
msgstr "升級"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19
msgid "Downgrade"
msgstr "降級"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
msgid "Before roll back"
msgstr "回滾之前"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
msgid "User"
msgstr "用戶"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:26
msgid "Unknown"
msgstr "未知"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:38
msgid "Active: "
msgstr "啓動: "
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44
msgid "slic3r version"
msgstr "slic3r 版本"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45 src/slic3r/GUI/Preset.cpp:1250
msgid "print"
msgstr "列印"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46
msgid "filaments"
msgstr "耗材"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:47 src/slic3r/GUI/Preset.cpp:1254
msgid "printer"
msgstr "印表機"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Tab.cpp:872
msgid "vendor"
msgstr "供應商"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51
msgid "version"
msgstr "版本"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
msgid "min slic3r version"
msgstr "最低 slic3r 版本"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:54
msgid "max slic3r version"
msgstr "最高 slic3r 版本"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57
msgid "model"
msgstr "模型"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57
msgid "variants"
msgstr "變種"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
msgid "Incompatible with this Slic3r"
msgstr "與當前 Slic3r 版本不兼容"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
msgid "Activate"
msgstr "啟用"
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:98
msgid "Configuration Snapshots"
msgstr "配置快照"
#: src/slic3r/GUI/ConfigWizard.cpp:111
msgid "nozzle"
msgstr "噴嘴"
#: src/slic3r/GUI/ConfigWizard.cpp:115
msgid "Alternate nozzles:"
msgstr "備用噴嘴:"
#: src/slic3r/GUI/ConfigWizard.cpp:181
msgid "All standard"
msgstr "所有標準"
#: src/slic3r/GUI/ConfigWizard.cpp:182 src/slic3r/GUI/Tab.cpp:2909
msgid "All"
msgstr "所有"
#: src/slic3r/GUI/ConfigWizard.cpp:183 src/slic3r/GUI/Plater.cpp:414
#: src/libslic3r/GCode/PreviewData.cpp:162
msgid "None"
msgstr "無"
#: src/slic3r/GUI/ConfigWizard.cpp:284
#, c-format
msgid "Welcome to the Slic3r %s"
msgstr "歡迎使用 Slic3r %s"
#: src/slic3r/GUI/ConfigWizard.cpp:284
msgid "Welcome"
msgstr "歡迎"
#: src/slic3r/GUI/ConfigWizard.cpp:288 src/slic3r/GUI/GUI_App.cpp:600
#, c-format
msgid "Run %s"
msgstr "運行 %s"
#: src/slic3r/GUI/ConfigWizard.cpp:290
#, c-format
msgid ""
"Hello, welcome to Slic3r Prusa Edition! This %s helps you with the initial "
"configuration; just a few settings and you will be ready to print."
msgstr ""
"您好, 歡迎來到 Slic3r Prusa版 !此 %s 可幫助您進行初始配置; 只需幾個設置, 您就"
"可以列印了。"
#: src/slic3r/GUI/ConfigWizard.cpp:294
msgid ""
"Remove user profiles - install from scratch (a snapshot will be taken "
"beforehand)"
msgstr "刪除用戶配置文件-從頭開始安裝 (將事先創建快照)"
#: src/slic3r/GUI/ConfigWizard.cpp:325
#, c-format
msgid "%s Family"
msgstr "%s 家庭"
#: src/slic3r/GUI/ConfigWizard.cpp:362
msgid "Custom Printer Setup"
msgstr "自定義印表機設置"
#: src/slic3r/GUI/ConfigWizard.cpp:362
msgid "Custom Printer"
msgstr "自定義印表機"
#: src/slic3r/GUI/ConfigWizard.cpp:364
msgid "Define a custom printer profile"
msgstr "定義自定義印表機配置文件"
#: src/slic3r/GUI/ConfigWizard.cpp:366
msgid "Custom profile name:"
msgstr "自定義配置文件名稱:"
#: src/slic3r/GUI/ConfigWizard.cpp:390
msgid "Automatic updates"
msgstr "自動更新"
#: src/slic3r/GUI/ConfigWizard.cpp:390
msgid "Updates"
msgstr "更新"
#: src/slic3r/GUI/ConfigWizard.cpp:398 src/slic3r/GUI/Preferences.cpp:59
msgid "Check for application updates"
msgstr "檢查應用程序更新"
#: src/slic3r/GUI/ConfigWizard.cpp:401 src/slic3r/GUI/Preferences.cpp:61
msgid ""
"If enabled, Slic3r checks for new versions of Slic3r PE online. When a new "
"version becomes available a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"如果啓用, Slic3r 將在線檢查新版本的 Slic3r PE。當新版本可用時, 在下一次應用程"
"序啓動時將顯示通知 (在程序使用過程中永遠不會顯示通知)。這只是一個通知機制, 不"
"進行自動安裝。"
#: src/slic3r/GUI/ConfigWizard.cpp:405 src/slic3r/GUI/Preferences.cpp:67
msgid "Update built-in Presets automatically"
msgstr "自動更新內置預設"
#: src/slic3r/GUI/ConfigWizard.cpp:408 src/slic3r/GUI/Preferences.cpp:69
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"如果啓用，Slic3r 將在後臺下載內置系統預設的更新。 這些更新將會下載到一個單獨"
"的臨時文件夾。當一切準備就緒，將在應用啓動的時候提供新版本。"
#: src/slic3r/GUI/ConfigWizard.cpp:409
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr "未經用戶同意, 永遠不會應用更新, 也永遠不會覆蓋用戶的自定義設置。"
#: src/slic3r/GUI/ConfigWizard.cpp:414
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr "此外, 在應用更新之前, 將創建整個配置的備份快照。"
#: src/slic3r/GUI/ConfigWizard.cpp:421
msgid "Other Vendors"
msgstr "其他供應商"
#: src/slic3r/GUI/ConfigWizard.cpp:423
msgid "Pick another vendor supported by Slic3r PE:"
msgstr "選擇 Slic3r pe 支持的其他供應商:"
#: src/slic3r/GUI/ConfigWizard.cpp:469
msgid "Firmware Type"
msgstr "固件類型"
#: src/slic3r/GUI/ConfigWizard.cpp:469 src/slic3r/GUI/Tab.cpp:1870
msgid "Firmware"
msgstr "固件"
#: src/slic3r/GUI/ConfigWizard.cpp:473
msgid "Choose the type of firmware used by your printer."
msgstr "選擇印表機使用的固件類型。"
#: src/slic3r/GUI/ConfigWizard.cpp:507
msgid "Bed Shape and Size"
msgstr "熱牀形狀和大小"
#: src/slic3r/GUI/ConfigWizard.cpp:510
msgid "Set the shape of your printer's bed."
msgstr "設置印表機熱牀的形狀。"
#: src/slic3r/GUI/ConfigWizard.cpp:524
msgid "Filament and Nozzle Diameters"
msgstr "耗材絲和噴嘴直徑"
#: src/slic3r/GUI/ConfigWizard.cpp:524
msgid "Print Diameters"
msgstr "列印直徑"
#: src/slic3r/GUI/ConfigWizard.cpp:540
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "輸入印表機熱端噴嘴的直徑。"
#: src/slic3r/GUI/ConfigWizard.cpp:543
msgid "Nozzle Diameter:"
msgstr "噴嘴直徑:"
#: src/slic3r/GUI/ConfigWizard.cpp:553
msgid "Enter the diameter of your filament."
msgstr "輸入耗材絲的直徑。"
#: src/slic3r/GUI/ConfigWizard.cpp:554
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"需要良好的精度, 因此請使用遊標卡尺, 沿耗材絲進行多次測量, 然後計算平均值。"
#: src/slic3r/GUI/ConfigWizard.cpp:557
msgid "Filament Diameter:"
msgstr "耗材絲直徑:"
#: src/slic3r/GUI/ConfigWizard.cpp:575
msgid "Extruder and Bed Temperatures"
msgstr "擠出機和熱牀溫溫度"
#: src/slic3r/GUI/ConfigWizard.cpp:575
msgid "Temperatures"
msgstr "溫度"
#: src/slic3r/GUI/ConfigWizard.cpp:591
msgid "Enter the temperature needed for extruding your filament."
msgstr "輸入擠出耗材絲所需的溫度。"
#: src/slic3r/GUI/ConfigWizard.cpp:592
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr "根據經驗, PLA 爲160至 230°C, ABS 爲215至250°C。"
#: src/slic3r/GUI/ConfigWizard.cpp:595
msgid "Extrusion Temperature:"
msgstr "擠出溫度:"
#: src/slic3r/GUI/ConfigWizard.cpp:596 src/slic3r/GUI/ConfigWizard.cpp:610
msgid "°C"
msgstr "°C"
#: src/slic3r/GUI/ConfigWizard.cpp:605
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr "輸入讓你的耗材粘在熱牀上所需的牀溫。"
#: src/slic3r/GUI/ConfigWizard.cpp:606
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr "根據經驗, PLA 爲 60°C, ABS 爲 110°C. 如果沒有加熱牀, 請保留零。"
#: src/slic3r/GUI/ConfigWizard.cpp:609
msgid "Bed Temperature:"
msgstr "熱牀溫度:"
#: src/slic3r/GUI/ConfigWizard.cpp:1001
msgid "Select all standard printers"
msgstr "選擇所有標準印表機"
#: src/slic3r/GUI/ConfigWizard.cpp:1004
msgid "< &Back"
msgstr "< &返回"
#: src/slic3r/GUI/ConfigWizard.cpp:1005
msgid "&Next >"
msgstr "&繼續 >"
#: src/slic3r/GUI/ConfigWizard.cpp:1006
msgid "&Finish"
msgstr "&結束"
#: src/slic3r/GUI/ConfigWizard.cpp:1007 src/slic3r/GUI/FirmwareDialog.cpp:142
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:37
#: src/slic3r/GUI/ProgressStatusBar.cpp:28
msgid "Cancel"
msgstr "取消"
#: src/slic3r/GUI/ConfigWizard.cpp:1021
msgid "Prusa FFF Technology Printers"
msgstr "Prusa FFF 技術印表機"
#: src/slic3r/GUI/ConfigWizard.cpp:1024
msgid "Prusa MSLA Technology Printers"
msgstr "Prusa MSLA 技術印表機"
#: src/slic3r/GUI/ConfigWizard.cpp:1111
msgid "Configuration Wizard"
msgstr "配置嚮導"
#: src/slic3r/GUI/ConfigWizard.cpp:1112
msgid "Configuration &Wizard"
msgstr "配置 &嚮導"
#: src/slic3r/GUI/ConfigWizard.cpp:1114
msgid "Configuration Assistant"
msgstr "配置助手"
#: src/slic3r/GUI/ConfigWizard.cpp:1115
msgid "Configuration &Assistant"
msgstr "配置 &助手"
#: src/slic3r/GUI/Field.cpp:112
msgid "default value"
msgstr "默認值"
#: src/slic3r/GUI/Field.cpp:115
msgid "parameter name"
msgstr "參數名稱"
#: src/slic3r/GUI/Field.cpp:143
#, c-format
msgid "%s doesn't support percentage"
msgstr "%s 不支持百分比"
#: src/slic3r/GUI/Field.cpp:157 src/slic3r/GUI/Field.cpp:180
msgid "Invalid numeric input."
msgstr "無效的數字輸入。"
#: src/slic3r/GUI/Field.cpp:162
msgid "Input value is out of range"
msgstr "輸入值超出範圍"
#: src/slic3r/GUI/Field.cpp:188
#, c-format
msgid ""
"Do you mean %d%% instead of %d %s?\n"
"Select YES if you want to change this value to %d%%, \n"
"or NO if you are sure that %d %s is a correct value."
msgstr ""
"你是否要輸入 %d%% 而不是 %d %s?\n"
"如果要將此值更改爲 %d%%, 請選擇 \"是\"; \n"
"如果您確定 %d %s 是正確的值, 請選擇 \"否\"。"
#: src/slic3r/GUI/Field.cpp:191
msgid "Parameter validation"
msgstr "參數驗證"
#: src/slic3r/GUI/FirmwareDialog.cpp:141
msgid "Flash!"
msgstr "燒錄！"
#: src/slic3r/GUI/FirmwareDialog.cpp:143
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr "燒錄正在進行中。請不要斷開印表機的連接!"
#: src/slic3r/GUI/FirmwareDialog.cpp:187
msgid "Flashing failed: "
msgstr "燒錄失敗: "
#: src/slic3r/GUI/FirmwareDialog.cpp:268
msgid "Flashing succeeded!"
msgstr "燒錄成功!"
#: src/slic3r/GUI/FirmwareDialog.cpp:269
msgid "Flashing failed. Please see the avrdude log below."
msgstr "燒錄失敗。請參見下面的日誌。"
#: src/slic3r/GUI/FirmwareDialog.cpp:270
msgid "Flashing cancelled."
msgstr "燒錄取消。"
#: src/slic3r/GUI/FirmwareDialog.cpp:308
#, c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""
"此固件十六進制文件與印表機型號不匹配。\n"
"十六進制文件用於: %s \n"
"印表機報告: %s \n"
" \n"
"是否仍要繼續並燒錄此十六進制文件？\n"
"只有在你確定這是正確的做法的情況下才能繼續。"
#: src/slic3r/GUI/FirmwareDialog.cpp:395 src/slic3r/GUI/FirmwareDialog.cpp:431
#, c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr "找到多個 %s 設備。請一次只連接一個以進行燒錄。"
#: src/slic3r/GUI/FirmwareDialog.cpp:412
#, c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""
"找不到 %s 設備。\n"
"如果設備已連接, 請按 USB 連接器旁邊的 \"重置\" 按鈕…"
#: src/slic3r/GUI/FirmwareDialog.cpp:525
#, c-format
msgid "The %s device could not have been found"
msgstr "找不到 %s 設備"
#: src/slic3r/GUI/FirmwareDialog.cpp:603
#, c-format
msgid "Error accessing port at %s: %s"
msgstr "訪問 %s: %s 端口時出錯"
#: src/slic3r/GUI/FirmwareDialog.cpp:605
#, c-format
msgid "Error: %s"
msgstr "錯誤: %s"
#: src/slic3r/GUI/FirmwareDialog.cpp:735
msgid "Firmware flasher"
msgstr "固件燒錄器"
#: src/slic3r/GUI/FirmwareDialog.cpp:762
msgid "Firmware image:"
msgstr "固件鏡像:"
#: src/slic3r/GUI/FirmwareDialog.cpp:766
msgid "Serial port:"
msgstr "串行端口："
#: src/slic3r/GUI/FirmwareDialog.cpp:768
msgid "Autodetected"
msgstr "自動檢測"
#: src/slic3r/GUI/FirmwareDialog.cpp:769
msgid "Rescan"
msgstr "重新掃描"
#: src/slic3r/GUI/FirmwareDialog.cpp:776
msgid "Progress:"
msgstr "進度:"
#: src/slic3r/GUI/FirmwareDialog.cpp:779
msgid "Status:"
msgstr "狀態："
#: src/slic3r/GUI/FirmwareDialog.cpp:780
msgid "Ready"
msgstr "準備好了"
#: src/slic3r/GUI/FirmwareDialog.cpp:800
msgid "Advanced: Output log"
msgstr "高級: 輸出log日誌"
#: src/slic3r/GUI/FirmwareDialog.cpp:811
#: src/slic3r/GUI/PrintHostDialogs.cpp:161
msgid "Close"
msgstr "關閉"
#: src/slic3r/GUI/FirmwareDialog.cpp:859
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""
"確實要取消韌體燒錄嗎？\n"
"這可能會使您的印表機處於無法使用的狀態!"
#: src/slic3r/GUI/FirmwareDialog.cpp:860
msgid "Confirmation"
msgstr "確認"
#: src/slic3r/GUI/FirmwareDialog.cpp:863
msgid "Cancelling..."
msgstr "正在取消...."
#: src/slic3r/GUI/GLCanvas3D.cpp:709
msgid "Detected object outside print volume"
msgstr "在列印範圍之外檢測到的對象"
#: src/slic3r/GUI/GLCanvas3D.cpp:710
msgid "Detected toolpath outside print volume"
msgstr "檢測到熱頭路徑超出列印範圍"
#: src/slic3r/GUI/GLCanvas3D.cpp:711
msgid "Some objects are not visible when editing supports"
msgstr "編輯支撐時, 某些對象不可見"
#: src/slic3r/GUI/GLCanvas3D.cpp:713
msgid ""
"Detected object outside print volume\n"
"Resolve a clash to continue slicing/export process correctly"
msgstr ""
"在列印範圍之外檢測到的對象\n"
"解決衝突後可以正常地繼續切片/導出"
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:35
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195
msgid "Rotate lower part upwards"
msgstr "旋轉下部向上"
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:36
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:198
msgid "Perform cut"
msgstr "執行切割"
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:43
msgid "Cut object:"
msgstr "切割對象:"
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:88
msgid "Cut [C]"
msgstr "切割 [C]"
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 src/libslic3r/PrintConfig.cpp:3006
msgid "Cut"
msgstr "切割"
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193
msgid "Keep upper part"
msgstr "保留上半部分"
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194
msgid "Keep lower part"
msgstr "保留下半部分"
#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:32
msgid "Place on face [F]"
msgstr "放在面上 [F]"
#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:51
msgid "Move [M]"
msgstr "移動 [M]"
#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:176
msgid "Position (mm)"
msgstr "位置 (mm)"
#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:176
msgid "Displacement (mm)"
msgstr "位移 (mm)"
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:458
msgid "Rotate [R]"
msgstr "旋轉 [R]"
#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:491
msgid "Rotation (deg)"
msgstr "旋轉 (deg)"
#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:51
msgid "Scale [S]"
msgstr "比例 [S]"
#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:276
msgid "Scale (%)"
msgstr "縮放 (%)"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:597
msgid "Left mouse click - add point"
msgstr "鼠標左鍵單擊-添加點"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:598
msgid "Right mouse click - remove point"
msgstr "鼠標右鍵單擊-刪除點"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:599
msgid "Shift + Left (+ drag) - select point(s)"
msgstr "移位 + 左 (+ 拖動)-選擇點"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:606
msgid "Head diameter: "
msgstr "列印頭直徑: "
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:618
msgid "Lock supports under new islands"
msgstr "在新的島之下鎖定支持"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:622
msgid "Remove selected points"
msgstr "刪除選定的點"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:626
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:679
msgid "Remove all points"
msgstr "刪除所有點"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:631
msgid "Apply changes"
msgstr "應用更改"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:636
msgid "Discard changes"
msgstr "放棄更改"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:644
msgid "Minimal points distance: "
msgstr "最小點距離: "
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:655
msgid "Support points density: "
msgstr "支撐點密度: "
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:669
msgid "Auto-generate points [A]"
msgstr "自動生成點 [A]"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:675
msgid "Manual editing [M]"
msgstr "手動編輯 [M]"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:738
msgid "SLA Support Points [L]"
msgstr "SLA 支撐點 [L]"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:767
msgid "Do you want to save your manually edited support points ?\n"
msgstr "是否要保存手動編輯的支持點？\n"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:768
msgid "Save changes?"
msgstr "保存更改嗎？"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897
msgid ""
"Autogeneration will erase all manually edited points.\n"
"\n"
"Are you sure you want to do it?\n"
msgstr ""
"自動生成將擦除所有手動編輯的點。\n"
"\n"
"您確定要這樣做嗎？\n"
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:899 src/slic3r/GUI/GUI.cpp:288
#: src/slic3r/GUI/WipeTowerDialog.cpp:44 src/slic3r/GUI/WipeTowerDialog.cpp:328
msgid "Warning"
msgstr "警告"
#: src/slic3r/GUI/GUI.cpp:147 src/slic3r/GUI/Tab.cpp:2720
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr "無法使用 SLA 技術列印多部分對象。"
#: src/slic3r/GUI/GUI.cpp:148
msgid "Please check and fix your object list."
msgstr "請檢查並修復您的對象列表。"
#: src/slic3r/GUI/GUI.cpp:149 src/slic3r/GUI/GUI_App.cpp:679
#: src/slic3r/GUI/Tab.cpp:2722
msgid "Attention!"
msgstr "注意！"
#: src/slic3r/GUI/GUI.cpp:282
msgid "Notice"
msgstr "通知"
#: src/slic3r/GUI/GUI_App.cpp:318
msgid "Changing of an application language"
msgstr "更改應用程序語言"
#: src/slic3r/GUI/GUI_App.cpp:326 src/slic3r/GUI/GUI_App.cpp:335
msgid "Recreating"
msgstr "再造"
#: src/slic3r/GUI/GUI_App.cpp:339
msgid "Loading of a current presets"
msgstr "載入當前預設"
#: src/slic3r/GUI/GUI_App.cpp:347
msgid "Loading of a mode view"
msgstr "載入模式視圖"
#: src/slic3r/GUI/GUI_App.cpp:429
msgid "Choose one file (3MF):"
msgstr "選擇一個文件 (3MF):"
#: src/slic3r/GUI/GUI_App.cpp:441
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "選擇一個或多個文件 (STL/OBJ/AMF/3MF/PRUSA):"
#: src/slic3r/GUI/GUI_App.cpp:454
msgid "Array of language names and identifiers should have the same size."
msgstr "語言名稱和標識符的數組應具有相同的大小。"
#: src/slic3r/GUI/GUI_App.cpp:464
msgid "Select the language"
msgstr "選擇語言"
#: src/slic3r/GUI/GUI_App.cpp:464
msgid "Language"
msgstr "語言"
#: src/slic3r/GUI/GUI_App.cpp:534 src/slic3r/GUI/GUI_ObjectList.cpp:1067
#: src/libslic3r/PrintConfig.cpp:298
msgid "Default"
msgstr "默認"
#: src/slic3r/GUI/GUI_App.cpp:603
msgid "&Configuration Snapshots"
msgstr "&配置快照"
#: src/slic3r/GUI/GUI_App.cpp:603
msgid "Inspect / activate configuration snapshots"
msgstr "檢查/啟用配置快照"
#: src/slic3r/GUI/GUI_App.cpp:604
msgid "Take Configuration &Snapshot"
msgstr "獲取配置和快照"
#: src/slic3r/GUI/GUI_App.cpp:604
msgid "Capture a configuration snapshot"
msgstr "擷取配置快照"
#: src/slic3r/GUI/GUI_App.cpp:607
msgid "&Preferences"
msgstr "&首選項"
#: src/slic3r/GUI/GUI_App.cpp:613
msgid "Application preferences"
msgstr "應用程序首選項"
#: src/slic3r/GUI/GUI_App.cpp:616 src/slic3r/GUI/wxExtensions.cpp:2446
msgid "Simple"
msgstr "簡單"
#: src/slic3r/GUI/GUI_App.cpp:616
msgid "Simple View Mode"
msgstr "簡單介面模式"
#: src/slic3r/GUI/GUI_App.cpp:617 src/slic3r/GUI/GUI_ObjectList.cpp:73
#: src/slic3r/GUI/Tab.cpp:977 src/slic3r/GUI/Tab.cpp:992
#: src/slic3r/GUI/Tab.cpp:1090 src/slic3r/GUI/Tab.cpp:1093
#: src/slic3r/GUI/Tab.cpp:1466 src/slic3r/GUI/Tab.cpp:1890
#: src/slic3r/GUI/Tab.cpp:3347 src/slic3r/GUI/wxExtensions.cpp:2447
#: src/libslic3r/PrintConfig.cpp:72 src/libslic3r/PrintConfig.cpp:186
#: src/libslic3r/PrintConfig.cpp:349 src/libslic3r/PrintConfig.cpp:987
#: src/libslic3r/PrintConfig.cpp:2173
msgid "Advanced"
msgstr "進階"
#: src/slic3r/GUI/GUI_App.cpp:617
msgid "Advanced View Mode"
msgstr "高級介面模式"
#: src/slic3r/GUI/GUI_App.cpp:618 src/slic3r/GUI/wxExtensions.cpp:2448
msgid "Expert"
msgstr "專家"
#: src/slic3r/GUI/GUI_App.cpp:618
msgid "Expert View Mode"
msgstr "專家介面模式"
#: src/slic3r/GUI/GUI_App.cpp:623
msgid "Mode"
msgstr "模式"
#: src/slic3r/GUI/GUI_App.cpp:623
msgid "Slic3r View Mode"
msgstr "Slic3r 界面模式"
#: src/slic3r/GUI/GUI_App.cpp:625
msgid "Change Application &Language"
msgstr "更改應用程序&語言"
#: src/slic3r/GUI/GUI_App.cpp:627
msgid "Flash printer &firmware"
msgstr "燒錄印表機&固件"
#: src/slic3r/GUI/GUI_App.cpp:627
msgid "Upload a firmware image into an Arduino based printer"
msgstr "將韌體鏡像檔上傳到基於 arduino 的印表機"
#: src/slic3r/GUI/GUI_App.cpp:639
msgid "Taking configuration snapshot"
msgstr "創建配置快照"
#: src/slic3r/GUI/GUI_App.cpp:639
msgid "Snapshot name"
msgstr "快照名稱"
#: src/slic3r/GUI/GUI_App.cpp:676
msgid "Application will be restarted after language change."
msgstr "更改語言後, 應用程序將重新啓動。"
#: src/slic3r/GUI/GUI_App.cpp:677
msgid "3D-Scene will be cleaned."
msgstr "3D 場景將被清理。"
#: src/slic3r/GUI/GUI_App.cpp:678
msgid "Please, check your changes before."
msgstr "請檢查您之前的更改。"
#: src/slic3r/GUI/GUI_App.cpp:706
msgid "&Configuration"
msgstr "&配置"
#: src/slic3r/GUI/GUI_App.cpp:726
msgid "You have unsaved changes "
msgstr "您有未保存的更改 "
#: src/slic3r/GUI/GUI_App.cpp:726
msgid ". Discard changes and continue anyway?"
msgstr "是否放棄更改並繼續？"
#: src/slic3r/GUI/GUI_App.cpp:727
msgid "Unsaved Presets"
msgstr "未保存的預設"
#: src/slic3r/GUI/GUI_ObjectList.cpp:28 src/slic3r/GUI/GUI_ObjectList.cpp:65
#: src/libslic3r/PrintConfig.cpp:56 src/libslic3r/PrintConfig.cpp:149
#: src/libslic3r/PrintConfig.cpp:380 src/libslic3r/PrintConfig.cpp:437
#: src/libslic3r/PrintConfig.cpp:445 src/libslic3r/PrintConfig.cpp:841
#: src/libslic3r/PrintConfig.cpp:1025 src/libslic3r/PrintConfig.cpp:1304
#: src/libslic3r/PrintConfig.cpp:1370 src/libslic3r/PrintConfig.cpp:1551
#: src/libslic3r/PrintConfig.cpp:1986 src/libslic3r/PrintConfig.cpp:2042
msgid "Layers and Perimeters"
msgstr "層和輪廓"
#: src/slic3r/GUI/GUI_ObjectList.cpp:29 src/slic3r/GUI/GUI_ObjectList.cpp:66
#: src/slic3r/GUI/Plater.cpp:431 src/slic3r/GUI/Tab.cpp:981
#: src/slic3r/GUI/Tab.cpp:982 src/slic3r/GUI/Tab.cpp:1311
#: src/libslic3r/PrintConfig.cpp:166 src/libslic3r/PrintConfig.cpp:388
#: src/libslic3r/PrintConfig.cpp:728 src/libslic3r/PrintConfig.cpp:742
#: src/libslic3r/PrintConfig.cpp:779 src/libslic3r/PrintConfig.cpp:932
#: src/libslic3r/PrintConfig.cpp:942 src/libslic3r/PrintConfig.cpp:960
#: src/libslic3r/PrintConfig.cpp:978 src/libslic3r/PrintConfig.cpp:997
#: src/libslic3r/PrintConfig.cpp:1658 src/libslic3r/PrintConfig.cpp:1675
msgid "Infill"
msgstr "填充"
#: src/slic3r/GUI/GUI_ObjectList.cpp:30 src/slic3r/GUI/GUI_ObjectList.cpp:67
#: src/slic3r/GUI/GUI_Preview.cpp:236 src/slic3r/GUI/Tab.cpp:1010
#: src/slic3r/GUI/Tab.cpp:1011 src/libslic3r/PrintConfig.cpp:333
#: src/libslic3r/PrintConfig.cpp:1431 src/libslic3r/PrintConfig.cpp:1779
#: src/libslic3r/PrintConfig.cpp:1785 src/libslic3r/PrintConfig.cpp:1793
#: src/libslic3r/PrintConfig.cpp:1805 src/libslic3r/PrintConfig.cpp:1815
#: src/libslic3r/PrintConfig.cpp:1823 src/libslic3r/PrintConfig.cpp:1838
#: src/libslic3r/PrintConfig.cpp:1859 src/libslic3r/PrintConfig.cpp:1870
#: src/libslic3r/PrintConfig.cpp:1886 src/libslic3r/PrintConfig.cpp:1895
#: src/libslic3r/PrintConfig.cpp:1904 src/libslic3r/PrintConfig.cpp:1915
#: src/libslic3r/PrintConfig.cpp:1929 src/libslic3r/PrintConfig.cpp:1937
#: src/libslic3r/PrintConfig.cpp:1938 src/libslic3r/PrintConfig.cpp:1947
#: src/libslic3r/PrintConfig.cpp:1955 src/libslic3r/PrintConfig.cpp:1969
#: src/libslic3r/GCode/PreviewData.cpp:172
msgid "Support material"
msgstr "支撐材料"
#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_ObjectList.cpp:69
#: src/slic3r/GUI/Tab.cpp:1070 src/slic3r/GUI/Tab.cpp:1794
#: src/libslic3r/PrintConfig.cpp:455 src/libslic3r/PrintConfig.cpp:953
#: src/libslic3r/PrintConfig.cpp:1339 src/libslic3r/PrintConfig.cpp:1667
#: src/libslic3r/PrintConfig.cpp:1851 src/libslic3r/PrintConfig.cpp:1877
#: src/libslic3r/PrintConfig.cpp:2149 src/libslic3r/PrintConfig.cpp:2157
msgid "Extruders"
msgstr "擠出頭"
#: src/slic3r/GUI/GUI_ObjectList.cpp:39
msgid "Pad and Support"
msgstr "墊和支撐"
#: src/slic3r/GUI/GUI_ObjectList.cpp:68 src/slic3r/GUI/GUI_Preview.cpp:215
#: src/slic3r/GUI/Tab.cpp:1035 src/libslic3r/PrintConfig.cpp:198
#: src/libslic3r/PrintConfig.cpp:425 src/libslic3r/PrintConfig.cpp:870
#: src/libslic3r/PrintConfig.cpp:998 src/libslic3r/PrintConfig.cpp:1360
#: src/libslic3r/PrintConfig.cpp:1597 src/libslic3r/PrintConfig.cpp:1646
#: src/libslic3r/PrintConfig.cpp:1697 src/libslic3r/PrintConfig.cpp:2028
msgid "Speed"
msgstr "速度"
#: src/slic3r/GUI/GUI_ObjectList.cpp:70 src/libslic3r/PrintConfig.cpp:415
#: src/libslic3r/PrintConfig.cpp:522 src/libslic3r/PrintConfig.cpp:829
#: src/libslic3r/PrintConfig.cpp:961 src/libslic3r/PrintConfig.cpp:1348
#: src/libslic3r/PrintConfig.cpp:1687 src/libslic3r/PrintConfig.cpp:1860
#: src/libslic3r/PrintConfig.cpp:2017
msgid "Extrusion Width"
msgstr "擠出寬度"
#: src/slic3r/GUI/GUI_ObjectList.cpp:75 src/slic3r/GUI/Plater.cpp:410
#: src/slic3r/GUI/Tab.cpp:3309 src/slic3r/GUI/Tab.cpp:3310
#: src/libslic3r/PrintConfig.cpp:2359 src/libslic3r/PrintConfig.cpp:2366
#: src/libslic3r/PrintConfig.cpp:2375 src/libslic3r/PrintConfig.cpp:2384
#: src/libslic3r/PrintConfig.cpp:2394 src/libslic3r/PrintConfig.cpp:2420
#: src/libslic3r/PrintConfig.cpp:2427 src/libslic3r/PrintConfig.cpp:2438
#: src/libslic3r/PrintConfig.cpp:2448 src/libslic3r/PrintConfig.cpp:2457
#: src/libslic3r/PrintConfig.cpp:2467 src/libslic3r/PrintConfig.cpp:2476
#: src/libslic3r/PrintConfig.cpp:2486 src/libslic3r/PrintConfig.cpp:2496
#: src/libslic3r/PrintConfig.cpp:2504
msgid "Supports"
msgstr "支撐"
#: src/slic3r/GUI/GUI_ObjectList.cpp:76 src/slic3r/GUI/Tab.cpp:3337
#: src/slic3r/GUI/Tab.cpp:3338 src/libslic3r/PrintConfig.cpp:2512
#: src/libslic3r/PrintConfig.cpp:2519 src/libslic3r/PrintConfig.cpp:2530
#: src/libslic3r/PrintConfig.cpp:2540 src/libslic3r/PrintConfig.cpp:2553
#: src/libslic3r/PrintConfig.cpp:2562
msgid "Pad"
msgstr "墊"
#: src/slic3r/GUI/GUI_ObjectList.cpp:173
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:45
msgid "Name"
msgstr "名稱"
#: src/slic3r/GUI/GUI_ObjectList.cpp:201
msgid "Right button click the icon to change the object settings"
msgstr "右鍵單擊圖標以更改對象設置"
#: src/slic3r/GUI/GUI_ObjectList.cpp:209
#, c-format
msgid "Auto-repaired (%d errors):\n"
msgstr "自動修復 (% d 錯誤):\n"
#: src/slic3r/GUI/GUI_ObjectList.cpp:212
msgid "degenerate facets"
msgstr "簡併平面"
#: src/slic3r/GUI/GUI_ObjectList.cpp:213
msgid "edges fixed"
msgstr "修復邊緣"
#: src/slic3r/GUI/GUI_ObjectList.cpp:214
msgid "facets removed"
msgstr "已移除平面"
#: src/slic3r/GUI/GUI_ObjectList.cpp:215
msgid "facets added"
msgstr "已添加平面"
#: src/slic3r/GUI/GUI_ObjectList.cpp:216
msgid "facets reversed"
msgstr "已反轉平面"
#: src/slic3r/GUI/GUI_ObjectList.cpp:217
msgid "backwards edges"
msgstr "反向邊緣"
#: src/slic3r/GUI/GUI_ObjectList.cpp:231
msgid "Right button click the icon to fix STL through Netfabb"
msgstr "右按鈕單擊圖標, 通過 Netfabb 修復 STL"
#: src/slic3r/GUI/GUI_ObjectList.cpp:278 src/slic3r/GUI/Tab.cpp:1430
#: src/libslic3r/PrintConfig.cpp:454
msgid "Extruder"
msgstr "擠出頭"
#: src/slic3r/GUI/GUI_ObjectList.cpp:683 src/slic3r/GUI/GUI_ObjectList.cpp:963
#: src/slic3r/GUI/GUI_ObjectList.cpp:969 src/slic3r/GUI/GUI_ObjectList.cpp:1199
#, c-format
msgid "Quick Add Settings (%s)"
msgstr "快速添加設置 (%s)"
#: src/slic3r/GUI/GUI_ObjectList.cpp:746
msgid "Select showing settings"
msgstr "選擇顯示的設置"
#: src/slic3r/GUI/GUI_ObjectList.cpp:874
msgid "Load"
msgstr "加載"
#: src/slic3r/GUI/GUI_ObjectList.cpp:879 src/slic3r/GUI/GUI_ObjectList.cpp:911
#: src/slic3r/GUI/GUI_ObjectList.cpp:914
msgid "Box"
msgstr "盒子"
#: src/slic3r/GUI/GUI_ObjectList.cpp:879
msgid "Cylinder"
msgstr "圓柱體"
#: src/slic3r/GUI/GUI_ObjectList.cpp:879
msgid "Sphere"
msgstr "球"
#: src/slic3r/GUI/GUI_ObjectList.cpp:879
msgid "Slab"
msgstr "板坯"
#: src/slic3r/GUI/GUI_ObjectList.cpp:890 src/slic3r/GUI/GUI_ObjectList.cpp:906
msgid "Add part"
msgstr "添加部件"
#: src/slic3r/GUI/GUI_ObjectList.cpp:891
msgid "Add modifier"
msgstr "添加修飾器"
#: src/slic3r/GUI/GUI_ObjectList.cpp:892 src/slic3r/GUI/GUI_ObjectList.cpp:910
msgid "Add support enforcer"
msgstr "添加支撐執行者"
#: src/slic3r/GUI/GUI_ObjectList.cpp:893 src/slic3r/GUI/GUI_ObjectList.cpp:913
msgid "Add support blocker"
msgstr "添加支撐屏蔽"
#: src/slic3r/GUI/GUI_ObjectList.cpp:934
msgid "Split to parts"
msgstr "拆分到零件"
#: src/slic3r/GUI/GUI_ObjectList.cpp:942
msgid "Add settings"
msgstr "添加設置"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1009
msgid "Change type"
msgstr "更改類型"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1016
#: src/slic3r/GUI/GUI_ObjectList.cpp:1153
msgid "Set as a Separated Object"
msgstr "設置爲分隔的對象"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1024
msgid "Rename"
msgstr "重命名"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1034
msgid "Fix through the Netfabb"
msgstr "通過 Netfabb 修復"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1041 src/slic3r/GUI/Plater.cpp:2861
msgid "Export as STL"
msgstr "導出爲 STL"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1048
msgid "Change extruder"
msgstr "更換擠出機"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1073
msgid "Select new extruder for the object/part"
msgstr "爲對象部分選擇新的擠出機"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1079 src/slic3r/GUI/Plater.cpp:2825
#: src/slic3r/GUI/Plater.cpp:2843 src/slic3r/GUI/Tab.cpp:2860
msgid "Delete"
msgstr "刪除"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1153
msgid "Set as a Separated Objects"
msgstr "設置爲分隔的對象"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1374
msgid "Generic"
msgstr "通用"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1516
msgid "You can't delete the last solid part from object."
msgstr "不能從對象中刪除最後一個實體部分。"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1533
msgid "You can't delete the last intance from object."
msgstr "不能從對象中刪除最後的實例。"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1560 src/slic3r/GUI/Plater.cpp:2219
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr "無法拆分所選對象, 因爲它只包含一個部分。"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1676
msgid "Group manipulation"
msgstr "操作組"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1688
msgid "Object manipulation"
msgstr "操作對象"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1698
msgid "Object Settings to modify"
msgstr "要修改的對象設置"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1702
msgid "Part Settings to modify"
msgstr "要修改的零件設置"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1711
msgid "Part manipulation"
msgstr "零件操作"
#: src/slic3r/GUI/GUI_ObjectList.cpp:1717
msgid "Instance manipulation"
msgstr "實例操作"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2240
msgid "Object or Instance"
msgstr "對象或實例"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2240
msgid "Part"
msgstr "部件"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2242
msgid "Unsupported selection"
msgstr "不支持的選擇"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2243
#, c-format
msgid "You started your selection with %s Item."
msgstr "您使用 %s 項開始選擇。"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2244
#, c-format
msgid "In this mode you can select only other %s Items%s"
msgstr "在此模式下, 您只能選擇其他 %s 項目 %s"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2247
msgid "of a current Object"
msgstr "當前對象的"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2252
#: src/slic3r/GUI/GUI_ObjectList.cpp:2325 src/slic3r/GUI/Plater.cpp:117
msgid "Info"
msgstr "信息"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2366
msgid "You can't change a type of the last solid part of the object."
msgstr "不能更改對象的最後一個實體部分的類型。"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2373
msgid "Select type of part"
msgstr "選擇零件類型"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2538
msgid "Enter new name"
msgstr "輸入新名稱"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2538
msgid "Renaming"
msgstr "重命名"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2554
#: src/slic3r/GUI/GUI_ObjectList.cpp:2632 src/slic3r/GUI/Tab.cpp:3191
#: src/slic3r/GUI/Tab.cpp:3195
msgid "The supplied name is not valid;"
msgstr "提供的名稱無效;"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2555
#: src/slic3r/GUI/GUI_ObjectList.cpp:2633 src/slic3r/GUI/Tab.cpp:3192
msgid "the following characters are not allowed:"
msgstr "不允許使用以下字符:"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2653
msgid "Set extruder for selected items"
msgstr "爲所選項目設置擠出機"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2654
msgid "Select extruder number for selected objects and/or parts"
msgstr "爲選定的對象和/或零件選擇擠出機編號"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2667
msgid "Select extruder number:"
msgstr "選擇擠出機編號:"
#: src/slic3r/GUI/GUI_ObjectList.cpp:2668
msgid "This extruder will be set for selected items"
msgstr "將爲選定的項目設置此擠出機"
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:25
msgid "Object Manipulation"
msgstr "操作對象"
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:47
msgid "Object name"
msgstr "對象名稱"
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:115
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:160
msgid "Position"
msgstr "位置"
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:116
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161
msgid "Rotation"
msgstr "旋轉"
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:117
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:201
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:221
#: src/libslic3r/PrintConfig.cpp:3070
msgid "Scale"
msgstr "縮放"
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:162
msgid "Scale factors"
msgstr "縮放比例因子"
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:200
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:220
#: src/libslic3r/PrintConfig.cpp:3055
msgid "Rotate"
msgstr "旋轉"
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:219
msgid "Translate"
msgstr "翻譯"
#: src/slic3r/GUI/GUI_ObjectSettings.cpp:58
msgid "Additional Settings"
msgstr "其他設置"
#: src/slic3r/GUI/GUI_Preview.cpp:209
msgid "View"
msgstr "查看"
#: src/slic3r/GUI/GUI_Preview.cpp:212 src/slic3r/GUI/GUI_Preview.cpp:525
#: src/libslic3r/GCode/PreviewData.cpp:394
msgid "Feature type"
msgstr "功能類型"
#: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:467
msgid "Height"
msgstr "高度"
#: src/slic3r/GUI/GUI_Preview.cpp:214 src/libslic3r/PrintConfig.cpp:2135
msgid "Width"
msgstr "寬度"
#: src/slic3r/GUI/GUI_Preview.cpp:216
msgid "Volumetric flow rate"
msgstr "體積流量"
#: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:315
#: src/slic3r/GUI/GUI_Preview.cpp:469 src/slic3r/GUI/GUI_Preview.cpp:525
#: src/slic3r/GUI/GUI_Preview.cpp:701 src/libslic3r/GCode/PreviewData.cpp:404
msgid "Tool"
msgstr "工具"
#: src/slic3r/GUI/GUI_Preview.cpp:218 src/slic3r/GUI/GUI_Preview.cpp:523
#: src/libslic3r/GCode/PreviewData.cpp:406
msgid "Color Print"
msgstr "彩色列印"
#: src/slic3r/GUI/GUI_Preview.cpp:221
msgid "Show"
msgstr "顯示"
#: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/GUI_Preview.cpp:225
msgid "Feature types"
msgstr "功能類型"
#: src/slic3r/GUI/GUI_Preview.cpp:227 src/libslic3r/GCode/PreviewData.cpp:163
msgid "Perimeter"
msgstr "周長"
#: src/slic3r/GUI/GUI_Preview.cpp:228 src/libslic3r/GCode/PreviewData.cpp:164
msgid "External perimeter"
msgstr "外部輪廓"
#: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/GCode/PreviewData.cpp:165
msgid "Overhang perimeter"
msgstr "懸空輪廓"
#: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/GCode/PreviewData.cpp:166
msgid "Internal infill"
msgstr "內部填充"
#: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/PrintConfig.cpp:1686
#: src/libslic3r/PrintConfig.cpp:1696 src/libslic3r/GCode/PreviewData.cpp:167
msgid "Solid infill"
msgstr "實心填充"
#: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/PrintConfig.cpp:2016
#: src/libslic3r/PrintConfig.cpp:2027 src/libslic3r/GCode/PreviewData.cpp:168
msgid "Top solid infill"
msgstr "頂部實心填充"
#: src/slic3r/GUI/GUI_Preview.cpp:233 src/libslic3r/GCode/PreviewData.cpp:169
msgid "Bridge infill"
msgstr "搭橋填充"
#: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/PrintConfig.cpp:869
#: src/libslic3r/GCode/PreviewData.cpp:170
msgid "Gap fill"
msgstr "間隙填充"
#: src/slic3r/GUI/GUI_Preview.cpp:235 src/slic3r/GUI/Tab.cpp:1001
#: src/libslic3r/GCode/PreviewData.cpp:171
msgid "Skirt"
msgstr "裙邊"
#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/PrintConfig.cpp:1903
#: src/libslic3r/GCode/PreviewData.cpp:173
msgid "Support material interface"
msgstr "支持材料端口"
#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/Tab.cpp:1081
#: src/libslic3r/GCode/PreviewData.cpp:174
msgid "Wipe tower"
msgstr "擦料塔"
#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/PrintConfig.cpp:2049
msgid "Travel"
msgstr "空程"
#: src/slic3r/GUI/GUI_Preview.cpp:244
msgid "Retractions"
msgstr "回抽"
#: src/slic3r/GUI/GUI_Preview.cpp:245
msgid "Unretractions"
msgstr "反回抽"
#: src/slic3r/GUI/GUI_Preview.cpp:246
msgid "Shells"
msgstr "殼"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:13
msgid "Slic3r Prusa Edition - Keyboard Shortcuts"
msgstr "Slic3r Prusa 版-鍵盤快捷方式"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:100
msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
msgstr "打開 STL/OBJ/AMF/3MF 項目配置，刪除熱牀"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:101
msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
msgstr "載入 STL/OBJ/AMF/3MF 項目配置，保留熱牀"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:102
msgid "Load Config from .ini/amf/3mf/gcode"
msgstr "從 .ini/amf/3mf/gcode 加載配置"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:103 src/slic3r/GUI/Plater.cpp:725
#: src/slic3r/GUI/Plater.cpp:3673 src/libslic3r/PrintConfig.cpp:2957
msgid "Export G-code"
msgstr "導出 G-code"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
msgid "Save project (3MF)"
msgstr "保存項目 (3MF)"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
msgid "Load Config from .ini/amf/3mf/gcode and merge"
msgstr "從 .ini/amf/3mf/gcode 導入設置併合並"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
msgid "(Re)slice"
msgstr "重新切片"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
msgid "Quick slice"
msgstr "快速切片"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/MainFrame.cpp:326
msgid "Repeat last quick slice"
msgstr "重複上一個快速切片"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Select Plater Tab"
msgstr "選擇 \"佈局器\" 選項卡"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
msgid "Quick slice and Save as"
msgstr "快速切片並另存爲"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
msgid "Select Print Settings Tab"
msgstr "選擇 \"列印設置\" 選項卡"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
msgid "Select Filament Settings Tab"
msgstr "選擇 \"耗材設置\" 選項卡"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
msgid "Select Printer Settings Tab"
msgstr "選擇 \"印表機設置\" 選項卡"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
msgid "Switch to 3D"
msgstr "切換到3D"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:115
msgid "Switch to Preview"
msgstr "切換到預覽"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:116 src/slic3r/GUI/Preferences.cpp:10
msgid "Preferences"
msgstr "首選項"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
#: src/slic3r/GUI/PrintHostDialogs.cpp:134
msgid "Print host upload queue"
msgstr "列印主機上傳隊列"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
msgid "Camera view "
msgstr "相機視圖 "
#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
msgid "Add Instance to selected object "
msgstr "將實例添加到選定的對象 "
#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
msgid "Remove Instance from selected object"
msgstr "從選定對象中刪除實例"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
msgid "Show keyboard shortcuts list"
msgstr "顯示鍵盤快捷鍵列表"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
msgid "Select multiple object/Move multiple object"
msgstr "選擇多個對象/移動多個對象"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
msgid "Main Shortcuts"
msgstr "主要快捷方式"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
msgid "Arrange"
msgstr "整理"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:131
msgid "Select All objects"
msgstr "選擇所有對象"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
msgid "Delete selected"
msgstr "刪除所選"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
msgid "Delete All"
msgstr "刪除所有"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
msgid "Gizmo move"
msgstr "線框移動"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Gizmo scale"
msgstr "線框縮放"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
msgid "Gizmo rotate"
msgstr "旋轉小物件"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
msgid "Gizmo cut"
msgstr "剪切小物件"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Gizmo Place face on bed"
msgstr "放置小物件面到熱牀"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Gizmo SLA support points"
msgstr "小物件SLA支撐點"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
#, no-c-format
msgid ""
"Press to snap by 5% in Gizmo scale\n"
"or by 1mm in Gizmo move"
msgstr ""
"按下 Gizmo 刻度可捕捉5%\n"
"或1毫米在 Gizmo 移動"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid ""
"Press to scale or rotate selected objects\n"
"around their own center"
msgstr ""
"按下可縮放或旋轉選定對象\n"
"圍繞着對象中心"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
msgid "Zoom to Bed"
msgstr "縮放至熱牀"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
msgid "Zoom to all objects in scene, if none selected"
msgstr "如果未選擇, 則縮放到場景中的所有對象"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Zoom to selected object"
msgstr "縮放到選定的對象"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
msgid "Zoom in"
msgstr "放大"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Zoom out"
msgstr "縮小"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Unselect gizmo, keep object selection"
msgstr "取消選擇小物件, 保留對象選擇"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
msgid "Plater Shortcuts"
msgstr "佈局器快捷方式"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
msgid "Arrow Up"
msgstr "上箭頭"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
msgid "Upper Layer"
msgstr "高層"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid "Arrow Down"
msgstr "上箭頭"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
msgid "Lower Layer"
msgstr "低層"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
msgid "Preview Shortcuts"
msgstr "預覽快捷方式"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
msgid "Move current slider thump Up"
msgstr "向上移動當前滑塊"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
msgid "Move current slider thump Down"
msgstr "向下移動當前滑塊"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
msgid "Arrow Left"
msgstr "左箭頭"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
msgid "Set upper thumb to current slider thumb"
msgstr "將上拇指設置爲當前滑塊拇指"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:178
msgid "Arrow Right"
msgstr "右箭頭"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:178
msgid "Set lower thumb to current slider thumb"
msgstr "將下拇指設置爲當前滑塊拇指"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
msgid "Add color change marker for current layer"
msgstr "添加當前圖層的顏色更改標記"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
msgid "Delete color change marker for current layer"
msgstr "刪除當前圖層的顏色更改標記"
#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
msgid "Layers Slider Shortcuts"
msgstr "圖層滑塊快捷方式"
#: src/slic3r/GUI/MainFrame.cpp:54
msgid ""
" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
msgstr " - 記得在 http://github.com/prusa3d/slic3r/releases 檢查更新"
#: src/slic3r/GUI/MainFrame.cpp:160
msgid "Plater"
msgstr "佈局器"
#: src/slic3r/GUI/MainFrame.cpp:273
msgid "&Open Project"
msgstr "&打開項目"
#: src/slic3r/GUI/MainFrame.cpp:273
msgid "Open a project file"
msgstr "打開項目文件"
#: src/slic3r/GUI/MainFrame.cpp:275
msgid "&Save Project"
msgstr "&保存項目"
#: src/slic3r/GUI/MainFrame.cpp:275
msgid "Save current project file"
msgstr "將當前項目文件另存爲"
#: src/slic3r/GUI/MainFrame.cpp:277
msgid "Save Project &as"
msgstr "保存項目 &爲"
#: src/slic3r/GUI/MainFrame.cpp:277
msgid "Save current project file as"
msgstr "將當前項目文件另存爲"
#: src/slic3r/GUI/MainFrame.cpp:283
msgid "Import STL/OBJ/AM&F/3MF"
msgstr "導入 STL/OBJ/AM&F/3MF"
#: src/slic3r/GUI/MainFrame.cpp:283
msgid "Load a model"
msgstr "加載模型"
#: src/slic3r/GUI/MainFrame.cpp:286
msgid "Import &Config"
msgstr "導入&配置"
#: src/slic3r/GUI/MainFrame.cpp:286
msgid "Load exported configuration file"
msgstr "加載導出的配置文件"
#: src/slic3r/GUI/MainFrame.cpp:288
msgid "Import Config from &project"
msgstr "從 &項目 導入配置"
#: src/slic3r/GUI/MainFrame.cpp:288
msgid "Load configuration from project file"
msgstr "從項目文件加載配置"
#: src/slic3r/GUI/MainFrame.cpp:291
msgid "Import Config &Bundle"
msgstr "導入配置&組"
#: src/slic3r/GUI/MainFrame.cpp:291
msgid "Load presets from a bundle"
msgstr "從包加載預設"
#: src/slic3r/GUI/MainFrame.cpp:293
msgid "&Import"
msgstr "&導入"
#: src/slic3r/GUI/MainFrame.cpp:296
msgid "Export &G-code"
msgstr "導出 &G-code"
#: src/slic3r/GUI/MainFrame.cpp:296
msgid "Export current plate as G-code"
msgstr "將當佈局板導出爲 G-code"
#: src/slic3r/GUI/MainFrame.cpp:299
msgid "Export plate as &STL"
msgstr "導出佈局板爲 &STL"
#: src/slic3r/GUI/MainFrame.cpp:299
msgid "Export current plate as STL"
msgstr "將當前佈局板導出爲 STL"
#: src/slic3r/GUI/MainFrame.cpp:301
msgid "Export plate as &AMF"
msgstr "導出佈局板爲 &AMF"
#: src/slic3r/GUI/MainFrame.cpp:301
msgid "Export current plate as AMF"
msgstr "將當佈局板導出爲 AMF"
#: src/slic3r/GUI/MainFrame.cpp:304
msgid "Export &Config"
msgstr "導出&配置"
#: src/slic3r/GUI/MainFrame.cpp:304
msgid "Export current configuration to file"
msgstr "將當前配置導出到文件"
#: src/slic3r/GUI/MainFrame.cpp:306
msgid "Export Config &Bundle"
msgstr "導出配置&包"
#: src/slic3r/GUI/MainFrame.cpp:306
msgid "Export all presets to file"
msgstr "將所有預設導出到文件"
#: src/slic3r/GUI/MainFrame.cpp:308
msgid "&Export"
msgstr "導出(&E)"
#: src/slic3r/GUI/MainFrame.cpp:314
msgid "Quick Slice"
msgstr "快速切片"
#: src/slic3r/GUI/MainFrame.cpp:314
msgid "Slice a file into a G-code"
msgstr "將文件切片成 G-code"
#: src/slic3r/GUI/MainFrame.cpp:320
msgid "Quick Slice and Save As"
msgstr "快速切片並另存爲"
#: src/slic3r/GUI/MainFrame.cpp:320
msgid "Slice a file into a G-code, save as"
msgstr "將文件切片成 G-code, 並另存爲"
#: src/slic3r/GUI/MainFrame.cpp:326
msgid "Repeat Last Quick Slice"
msgstr "重複上一個快速切片"
#: src/slic3r/GUI/MainFrame.cpp:334
msgid "(Re)Slice &Now"
msgstr "立即(重新)&切片"
#: src/slic3r/GUI/MainFrame.cpp:334
msgid "Start new slicing process"
msgstr "開始新的切片流程"
#: src/slic3r/GUI/MainFrame.cpp:337
msgid "&Repair STL file"
msgstr "&修復 STL 文件"
#: src/slic3r/GUI/MainFrame.cpp:337
msgid "Automatically repair an STL file"
msgstr "自動修復 STL 文件"
#: src/slic3r/GUI/MainFrame.cpp:340
msgid "&Quit"
msgstr "&退出"
#: src/slic3r/GUI/MainFrame.cpp:340
msgid "Quit Slic3r"
msgstr "退出 Slic3r"
#: src/slic3r/GUI/MainFrame.cpp:374
msgid "&Select all"
msgstr "&選擇所有"
#: src/slic3r/GUI/MainFrame.cpp:374
msgid "Selects all objects"
msgstr "選擇所有對象"
#: src/slic3r/GUI/MainFrame.cpp:377
msgid "&Delete selected"
msgstr "&刪除所選"
#: src/slic3r/GUI/MainFrame.cpp:377
msgid "Deletes the current selection"
msgstr "刪除當前所選內容"
#: src/slic3r/GUI/MainFrame.cpp:379
msgid "Delete &all"
msgstr "刪除&所有"
#: src/slic3r/GUI/MainFrame.cpp:379
msgid "Deletes all objects"
msgstr "刪除所有對象"
#: src/slic3r/GUI/MainFrame.cpp:392
msgid "&Plater Tab"
msgstr "&佈局器 選項卡"
#: src/slic3r/GUI/MainFrame.cpp:392
msgid "Show the plater"
msgstr "顯示平臺佈局器"
#: src/slic3r/GUI/MainFrame.cpp:399
msgid "P&rint Settings Tab"
msgstr "&列印設置選項卡"
#: src/slic3r/GUI/MainFrame.cpp:399
msgid "Show the print settings"
msgstr "顯示列印設置"
#: src/slic3r/GUI/MainFrame.cpp:401
msgid "&Filament Settings Tab"
msgstr "&線材設置選項卡"
#: src/slic3r/GUI/MainFrame.cpp:401
msgid "Show the filament settings"
msgstr "顯示耗材設置"
#: src/slic3r/GUI/MainFrame.cpp:403
msgid "Print&er Settings Tab"
msgstr "&印表機設置選項卡"
#: src/slic3r/GUI/MainFrame.cpp:403
msgid "Show the printer settings"
msgstr "顯示印表機設置"
#: src/slic3r/GUI/MainFrame.cpp:407
msgid "3&D"
msgstr "3&D"
#: src/slic3r/GUI/MainFrame.cpp:407
msgid "Show the 3D editing view"
msgstr "顯示3D 編輯視圖"
#: src/slic3r/GUI/MainFrame.cpp:409
msgid "Pre&view"
msgstr "預覽"
#: src/slic3r/GUI/MainFrame.cpp:409
msgid "Show the 3D slices preview"
msgstr "顯示3D 切片預覽"
#: src/slic3r/GUI/MainFrame.cpp:430
msgid "Print &Host Upload Queue"
msgstr "列印&主機上載隊列"
#: src/slic3r/GUI/MainFrame.cpp:430
msgid "Display the Print Host Upload Queue window"
msgstr "顯示 \"列印主機上載隊列\" 窗口"
#: src/slic3r/GUI/MainFrame.cpp:439
msgid "Iso"
msgstr "Iso"
#: src/slic3r/GUI/MainFrame.cpp:439
msgid "Iso View"
msgstr "Iso 視圖"
#: src/slic3r/GUI/MainFrame.cpp:441
msgid "Top"
msgstr "頂部"
#: src/libslic3r/PrintConfig.cpp:2041
msgctxt "Layers"
msgid "Top"
msgstr "頂部"
#: src/slic3r/GUI/MainFrame.cpp:441
msgid "Top View"
msgstr "頂視圖"
#: src/slic3r/GUI/MainFrame.cpp:442
msgid "Bottom"
msgstr "底部"
#: src/libslic3r/PrintConfig.cpp:148
msgctxt "Layers"
msgid "Bottom"
msgstr "底部"
#: src/slic3r/GUI/MainFrame.cpp:442
msgid "Bottom View"
msgstr "底部視圖"
#: src/slic3r/GUI/MainFrame.cpp:443
msgid "Front"
msgstr "前面"
#: src/slic3r/GUI/MainFrame.cpp:443
msgid "Front View"
msgstr "正視圖"
#: src/slic3r/GUI/MainFrame.cpp:444 src/libslic3r/PrintConfig.cpp:1561
msgid "Rear"
msgstr "背面"
#: src/slic3r/GUI/MainFrame.cpp:444
msgid "Rear View"
msgstr "後視圖"
#: src/slic3r/GUI/MainFrame.cpp:445
msgid "Left"
msgstr "左"
#: src/slic3r/GUI/MainFrame.cpp:445
msgid "Left View"
msgstr "左視圖"
#: src/slic3r/GUI/MainFrame.cpp:446
msgid "Right"
msgstr "右"
#: src/slic3r/GUI/MainFrame.cpp:446
msgid "Right View"
msgstr "右視圖"
#: src/slic3r/GUI/MainFrame.cpp:460
msgid "Prusa 3D &Drivers"
msgstr "Prusa 3D &驅動程序"
#: src/slic3r/GUI/MainFrame.cpp:460
msgid "Open the Prusa3D drivers download page in your browser"
msgstr "在瀏覽器中打開Prusa3d 驅動程序下載頁"
#: src/slic3r/GUI/MainFrame.cpp:462
msgid "Prusa Edition &Releases"
msgstr "Prusa版 版本"
#: src/slic3r/GUI/MainFrame.cpp:462
msgid "Open the Prusa Edition releases page in your browser"
msgstr "在瀏覽器中打開Prusa版版本頁面"
#: src/slic3r/GUI/MainFrame.cpp:468
msgid "Slic3r &Website"
msgstr "Slic3r &網站"
#: src/slic3r/GUI/MainFrame.cpp:468
msgid "Open the Slic3r website in your browser"
msgstr "在瀏覽器中打開 Slic3r 網站"
#: src/slic3r/GUI/MainFrame.cpp:470
msgid "Slic3r &Manual"
msgstr "Slic3r &手冊"
#: src/slic3r/GUI/MainFrame.cpp:470
msgid "Open the Slic3r manual in your browser"
msgstr "在瀏覽器中打開 Slic3r 手冊"
#: src/slic3r/GUI/MainFrame.cpp:473
msgid "System &Info"
msgstr "系統&信息"
#: src/slic3r/GUI/MainFrame.cpp:473
msgid "Show system information"
msgstr "顯示系統信息"
#: src/slic3r/GUI/MainFrame.cpp:475
msgid "Show &Configuration Folder"
msgstr "顯示&配置文件夾"
#: src/slic3r/GUI/MainFrame.cpp:475
msgid "Show user configuration folder (datadir)"
msgstr "顯示用戶配置文件夾 (datadir)"
#: src/slic3r/GUI/MainFrame.cpp:477
msgid "Report an I&ssue"
msgstr "報告&問題"
#: src/slic3r/GUI/MainFrame.cpp:477
msgid "Report an issue on the Slic3r Prusa Edition"
msgstr "報告關於 Slic3r Prusa 版的問題"
#: src/slic3r/GUI/MainFrame.cpp:479
msgid "&About Slic3r"
msgstr "&關於 Slic3r"
#: src/slic3r/GUI/MainFrame.cpp:479
msgid "Show about dialog"
msgstr "關於對話框"
#: src/slic3r/GUI/MainFrame.cpp:482
msgid "Keyboard Shortcuts"
msgstr "鍵盤快捷鍵"
#: src/slic3r/GUI/MainFrame.cpp:482
msgid "Show the list of the keyboard shortcuts"
msgstr "顯示鍵盤快捷鍵的列表"
#: src/slic3r/GUI/MainFrame.cpp:490
msgid "&File"
msgstr "&文件"
#: src/slic3r/GUI/MainFrame.cpp:491
msgid "&Edit"
msgstr "&編輯"
#: src/slic3r/GUI/MainFrame.cpp:492
msgid "&Window"
msgstr "&窗口"
#: src/slic3r/GUI/MainFrame.cpp:493
msgid "&View"
msgstr "&視圖"
#: src/slic3r/GUI/MainFrame.cpp:496
msgid "&Help"
msgstr "&幫助"
#: src/slic3r/GUI/MainFrame.cpp:524
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "選擇要切片的文件(STL/OBJ/AMF/3MF/PRUSA):"
#: src/slic3r/GUI/MainFrame.cpp:538
msgid "No previously sliced file."
msgstr "沒有預切片的文件。"
#: src/slic3r/GUI/MainFrame.cpp:539 src/slic3r/GUI/PrintHostDialogs.cpp:219
msgid "Error"
msgstr "錯誤"
#: src/slic3r/GUI/MainFrame.cpp:544
msgid "Previously sliced file ("
msgstr "預切片文件 ("
#: src/slic3r/GUI/MainFrame.cpp:544
msgid ") not found."
msgstr ") 無法找到。"
#: src/slic3r/GUI/MainFrame.cpp:545
msgid "File Not Found"
msgstr "文件未找到"
#: src/slic3r/GUI/MainFrame.cpp:580 src/slic3r/GUI/Tab.cpp:3152
msgid "Save "
msgstr "保存 "
#: src/slic3r/GUI/MainFrame.cpp:580
msgid "SVG"
msgstr "SVG"
#: src/slic3r/GUI/MainFrame.cpp:580
msgid "G-code"
msgstr "G-code"
#: src/slic3r/GUI/MainFrame.cpp:580
msgid " file as:"
msgstr " 文件爲:"
#: src/slic3r/GUI/MainFrame.cpp:595
msgid "Save zip file as:"
msgstr "將 zip 文件另存爲:"
#: src/slic3r/GUI/MainFrame.cpp:607 src/slic3r/GUI/Plater.cpp:2352
#: src/slic3r/GUI/Plater.cpp:3467 src/slic3r/GUI/Tab.cpp:1110
#: src/slic3r/GUI/Tab.cpp:3348
msgid "Slicing"
msgstr "切片"
#: src/slic3r/GUI/MainFrame.cpp:607
msgid "Processing "
msgstr "處理 "
#: src/slic3r/GUI/MainFrame.cpp:630
msgid " was successfully sliced."
msgstr " 已成功切片。"
#: src/slic3r/GUI/MainFrame.cpp:632
msgid "Slicing Done!"
msgstr "切片完成!"
#: src/slic3r/GUI/MainFrame.cpp:647
msgid "Select the STL file to repair:"
msgstr "選擇要修復的 STL 文件:"
#: src/slic3r/GUI/MainFrame.cpp:661
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr "將 OBJ 文件 (不像 STL 那樣容易發生座標錯誤) 保存爲:"
#: src/slic3r/GUI/MainFrame.cpp:676
msgid "Your file was repaired."
msgstr "您的文件已修復。"
#: src/slic3r/GUI/MainFrame.cpp:676 src/libslic3r/PrintConfig.cpp:3051
msgid "Repair"
msgstr "修復"
#: src/slic3r/GUI/MainFrame.cpp:690
msgid "Save configuration as:"
msgstr "將配置另存爲:"
#: src/slic3r/GUI/MainFrame.cpp:710 src/slic3r/GUI/MainFrame.cpp:774
msgid "Select configuration to load:"
msgstr "選擇要加載的配置:"
#: src/slic3r/GUI/MainFrame.cpp:747
msgid "Save presets bundle as:"
msgstr "將預設包保存爲:"
#: src/slic3r/GUI/MainFrame.cpp:798
#, c-format
msgid "%d presets successfully imported."
msgstr "%d 預設已成功導入。"
#: src/slic3r/GUI/MsgDialog.cpp:71
msgid "Slic3r error"
msgstr "Slic3r 錯誤"
#: src/slic3r/GUI/MsgDialog.cpp:71
msgid "Slic3r has encountered an error"
msgstr "Slic3r 遇到錯誤"
#: src/slic3r/GUI/Plater.cpp:137
msgid "Volume"
msgstr "體積"
#: src/slic3r/GUI/Plater.cpp:138
msgid "Facets"
msgstr "平面"
#: src/slic3r/GUI/Plater.cpp:139
msgid "Materials"
msgstr "材料"
#: src/slic3r/GUI/Plater.cpp:142
msgid "Manifold"
msgstr "流形"
#: src/slic3r/GUI/Plater.cpp:188
msgid "Sliced Info"
msgstr "切片信息"
#: src/slic3r/GUI/Plater.cpp:207 src/slic3r/GUI/Plater.cpp:998
msgid "Used Filament (m)"
msgstr "消耗耗材絲 (m)"
#: src/slic3r/GUI/Plater.cpp:208
msgid "Used Filament (mm³)"
msgstr "消耗耗材絲 (mm³)"
#: src/slic3r/GUI/Plater.cpp:209
msgid "Used Filament (g)"
msgstr "消耗耗材絲 (g)"
#: src/slic3r/GUI/Plater.cpp:210
msgid "Used Material (unit)"
msgstr "消耗材料 (單位)"
#: src/slic3r/GUI/Plater.cpp:211 src/slic3r/GUI/Plater.cpp:1013
#: src/libslic3r/PrintConfig.cpp:716
msgid "Cost"
msgstr "單價"
#: src/slic3r/GUI/Plater.cpp:212 src/slic3r/GUI/Plater.cpp:985
#: src/slic3r/GUI/Plater.cpp:1027
msgid "Estimated printing time"
msgstr "預計列印時間"
#: src/slic3r/GUI/Plater.cpp:213
msgid "Number of tool changes"
msgstr "工具更換次數"
#: src/slic3r/GUI/Plater.cpp:290
msgid "Click to edit preset"
msgstr "點擊編輯預設"
#: src/slic3r/GUI/Plater.cpp:413
msgid "Select what kind of support do you need"
msgstr "選擇您需要的支持類型"
#: src/slic3r/GUI/Plater.cpp:415 src/libslic3r/PrintConfig.cpp:1814
#: src/libslic3r/PrintConfig.cpp:2419
msgid "Support on build plate only"
msgstr "僅在熱牀上生成支撐"
#: src/slic3r/GUI/Plater.cpp:416
msgid "Everywhere"
msgstr "任何地方"
#: src/slic3r/GUI/Plater.cpp:438 src/slic3r/GUI/Tab.cpp:1007
msgid "Brim"
msgstr "側裙"
#: src/slic3r/GUI/Plater.cpp:440
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr "此標誌啓用將在第一層上的每個對象周圍列印裙邊."
#: src/slic3r/GUI/Plater.cpp:448
msgid "Purging volumes"
msgstr "清理量"
#: src/slic3r/GUI/Plater.cpp:673
msgid "Print settings"
msgstr "列印設置"
#: src/slic3r/GUI/Plater.cpp:674 src/slic3r/GUI/Tab.cpp:1421
#: src/slic3r/GUI/Tab.cpp:1422
msgid "Filament"
msgstr "線材"
#: src/slic3r/GUI/Plater.cpp:675 src/slic3r/GUI/Preset.cpp:1252
msgid "SLA print"
msgstr "SLA 列印"
#: src/slic3r/GUI/Plater.cpp:676 src/slic3r/GUI/Preset.cpp:1253
msgid "SLA material"
msgstr "SLA 材料"
#: src/slic3r/GUI/Plater.cpp:677
msgid "Printer"
msgstr "印表機"
#: src/slic3r/GUI/Plater.cpp:707 src/slic3r/GUI/Plater.cpp:3674
msgid "Send to printer"
msgstr "發送到印表機"
#: src/slic3r/GUI/Plater.cpp:727 src/slic3r/GUI/Plater.cpp:2352
#: src/slic3r/GUI/Plater.cpp:3470
msgid "Slice now"
msgstr "立即切片"
#: src/slic3r/GUI/Plater.cpp:860
msgid "Hold Shift to Slice & Export G-code"
msgstr "按住Shift鍵來切片 並 導出G-code"
#: src/slic3r/GUI/Plater.cpp:931
#, c-format
msgid "%d (%d shells)"
msgstr "%d (%d 殼)"
#: src/slic3r/GUI/Plater.cpp:936
#, c-format
msgid "Auto-repaired (%d errors)"
msgstr "自動修復 (%d 錯誤):"
#: src/slic3r/GUI/Plater.cpp:939
#, c-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr "%d 退化面,%d 邊緣固定,%d 面被移除,%d 面被刪除,%d 面反轉,%d 逆向邊緣"
#: src/slic3r/GUI/Plater.cpp:949
msgid "Yes"
msgstr "是"
#: src/slic3r/GUI/Plater.cpp:972
msgid "Used Material (ml)"
msgstr "使用的材料 (毫升)"
#: src/slic3r/GUI/Plater.cpp:975
msgid "object(s)"
msgstr "對象 (s)"
#: src/slic3r/GUI/Plater.cpp:975
msgid "supports and pad"
msgstr "支撐和墊"
#: src/slic3r/GUI/Plater.cpp:1000 src/slic3r/GUI/Plater.cpp:1015
msgid "objects"
msgstr "對象"
#: src/slic3r/GUI/Plater.cpp:1000 src/slic3r/GUI/Plater.cpp:1015
msgid "wipe tower"
msgstr "擦料塔"
#: src/slic3r/GUI/Plater.cpp:1030
msgid "normal mode"
msgstr "正常模式"
#: src/slic3r/GUI/Plater.cpp:1034
msgid "silent mode"
msgstr "靜音模式"
#: src/slic3r/GUI/Plater.cpp:1544
msgid "Loading"
msgstr "載入中"
#: src/slic3r/GUI/Plater.cpp:1554
#, c-format
msgid "Processing input file %s\n"
msgstr "處理輸入文件 %s\n"
#: src/slic3r/GUI/Plater.cpp:1612
msgid ""
"This file contains several objects positioned at multiple heights. Instead "
"of considering them as multiple objects, should I consider\n"
"this file as a single object having multiple parts?\n"
msgstr ""
"此文件包含位於多個高度的多個對象。是否把文件當作有多個部件的單一物體？\n"
#: src/slic3r/GUI/Plater.cpp:1615 src/slic3r/GUI/Plater.cpp:1707
msgid "Multi-part object detected"
msgstr "檢測到多部分對象"
#: src/slic3r/GUI/Plater.cpp:1650
msgid ""
"This file cannot be loaded in simple mode. Do you want to switch to expert "
"mode?\n"
msgstr "無法在簡單模式下加載此文件。是否要切換到專家模式？\n"
#: src/slic3r/GUI/Plater.cpp:1651
msgid "Detected advanced data"
msgstr "檢測到的高級數據"
#: src/slic3r/GUI/Plater.cpp:1684
#, c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them "
"is(are) multi-part"
msgstr "不能從 %s 中添加對象, 因爲其中一個或一些有多個部分"
#: src/slic3r/GUI/Plater.cpp:1704
msgid ""
"Multiple objects were loaded for a multi-material printer.\n"
"Instead of considering them as multiple objects, should I consider\n"
"these files to represent a single object having multiple parts?\n"
msgstr ""
"爲多材料印表機加載了多個對象。\n"
"是否將這些文件視爲具有多個部分的單個對象？\n"
#: src/slic3r/GUI/Plater.cpp:1720
msgid "Loaded"
msgstr "加載"
#: src/slic3r/GUI/Plater.cpp:1812
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr "您的對象看起來太大, 因此它被自動縮小以適合您的列印牀。"
#: src/slic3r/GUI/Plater.cpp:1813
msgid "Object too large?"
msgstr "對象太大？"
#: src/slic3r/GUI/Plater.cpp:1863
msgid "Export STL file:"
msgstr "導出 STL 文件:"
#: src/slic3r/GUI/Plater.cpp:1870
msgid "Export AMF file:"
msgstr "導出 AMF 文件:"
#: src/slic3r/GUI/Plater.cpp:1876
msgid "Save file as:"
msgstr "將文件另存爲:"
#: src/slic3r/GUI/Plater.cpp:2042
msgid "Arranging canceled"
msgstr "佈局已取消"
#: src/slic3r/GUI/Plater.cpp:2045
msgid "Arranging"
msgstr "自動佈局"
#: src/slic3r/GUI/Plater.cpp:2079
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr "無法排列模型對象!某些幾何形狀可能無效。"
#: src/slic3r/GUI/Plater.cpp:2083
msgid "Arranging done."
msgstr "佈局完成."
#: src/slic3r/GUI/Plater.cpp:2124
msgid "Orientation search canceled"
msgstr "方向搜索已取消"
#: src/slic3r/GUI/Plater.cpp:2129
msgid "Searching for optimal orientation"
msgstr "尋找最佳方向"
#: src/slic3r/GUI/Plater.cpp:2190
msgid "Orientation found."
msgstr "找到方向。"
#: src/slic3r/GUI/Plater.cpp:2211
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr "無法拆分所選對象, 因爲它包含多個容量/材質。"
#: src/slic3r/GUI/Plater.cpp:2337
msgid "Invalid data"
msgstr "無效數據"
#: src/slic3r/GUI/Plater.cpp:2346
msgid "Ready to slice"
msgstr "準備切片"
#: src/slic3r/GUI/Plater.cpp:2379 src/slic3r/GUI/PrintHostDialogs.cpp:220
msgid "Cancelling"
msgstr "取消中"
#: src/slic3r/GUI/Plater.cpp:2396
msgid "Another export job is currently running."
msgstr "另一個導出作業當前正在運行。"
#: src/slic3r/GUI/Plater.cpp:2656
msgid "Export failed"
msgstr "導出失敗"
#: src/slic3r/GUI/Plater.cpp:2661 src/slic3r/GUI/PrintHostDialogs.cpp:221
msgid "Cancelled"
msgstr "已取消"
#: src/slic3r/GUI/Plater.cpp:2747 src/slic3r/GUI/Plater.cpp:2759
#: src/slic3r/GUI/Plater.cpp:2831
msgid "Increase copies"
msgstr "增加副本"
#: src/slic3r/GUI/Plater.cpp:2825 src/slic3r/GUI/Plater.cpp:2843
msgid "Remove the selected object"
msgstr "刪除選定的對象"
#: src/slic3r/GUI/Plater.cpp:2831
msgid "Place one more copy of the selected object"
msgstr "再放置所選對象的一個副本"
#: src/slic3r/GUI/Plater.cpp:2833
msgid "Decrease copies"
msgstr "減少副本"
#: src/slic3r/GUI/Plater.cpp:2833
msgid "Remove one copy of the selected object"
msgstr "刪除所選對象的一個副本"
#: src/slic3r/GUI/Plater.cpp:2835
msgid "Set number of copies"
msgstr "設置份數"
#: src/slic3r/GUI/Plater.cpp:2835
msgid "Change the number of copies of the selected object"
msgstr "更改所選對象的份數"
#: src/slic3r/GUI/Plater.cpp:2858
msgid "Reload from Disk"
msgstr "從磁盤重新加載"
#: src/slic3r/GUI/Plater.cpp:2858
msgid "Reload the selected file from Disk"
msgstr "從磁盤重新加載所選文件"
#: src/slic3r/GUI/Plater.cpp:2861
msgid "Export the selected object as STL file"
msgstr "將所選對象導出爲 STL 文件"
#: src/slic3r/GUI/Plater.cpp:2873
msgid "Along X axis"
msgstr "沿 X 軸"
#: src/slic3r/GUI/Plater.cpp:2873
msgid "Mirror the selected object along the X axis"
msgstr "沿 X 軸鏡像所選對象"
#: src/slic3r/GUI/Plater.cpp:2875
msgid "Along Y axis"
msgstr "沿 Y 軸"
#: src/slic3r/GUI/Plater.cpp:2875
msgid "Mirror the selected object along the Y axis"
msgstr "沿 Y 軸鏡像所選對象"
#: src/slic3r/GUI/Plater.cpp:2877
msgid "Along Z axis"
msgstr "沿 Z 軸"
#: src/slic3r/GUI/Plater.cpp:2877
msgid "Mirror the selected object along the Z axis"
msgstr "沿 Z 軸鏡像所選對象"
#: src/slic3r/GUI/Plater.cpp:2880
msgid "Mirror"
msgstr "鏡像"
#: src/slic3r/GUI/Plater.cpp:2880
msgid "Mirror the selected object"
msgstr "鏡像所選對象"
#: src/slic3r/GUI/Plater.cpp:2898
msgid "To objects"
msgstr "拆分到對象"
#: src/slic3r/GUI/Plater.cpp:2898 src/slic3r/GUI/Plater.cpp:2920
msgid "Split the selected object into individual objects"
msgstr "將所選對象拆分爲單個對象"
#: src/slic3r/GUI/Plater.cpp:2900
msgid "To parts"
msgstr "到零件"
#: src/slic3r/GUI/Plater.cpp:2900 src/slic3r/GUI/Plater.cpp:2940
msgid "Split the selected object into individual sub-parts"
msgstr "將所選對象拆分爲各個子部件"
#: src/slic3r/GUI/Plater.cpp:2903 src/slic3r/GUI/Plater.cpp:2920
#: src/slic3r/GUI/Plater.cpp:2940 src/libslic3r/PrintConfig.cpp:3075
msgid "Split"
msgstr "拆分"
#: src/slic3r/GUI/Plater.cpp:2903
msgid "Split the selected object"
msgstr "拆分所選對象"
#: src/slic3r/GUI/Plater.cpp:2926
msgid "Optimize orientation"
msgstr "優化方向"
#: src/slic3r/GUI/Plater.cpp:2926
msgid "Optimize the rotation of the object for better print results."
msgstr "優化對象的旋轉, 以獲得更好的列印效果。"
#: src/slic3r/GUI/Plater.cpp:3342
msgid "Save G-code file as:"
msgstr "將 G-code 文件另存爲:"
#: src/slic3r/GUI/Plater.cpp:3342
msgid "Save SL1 file as:"
msgstr "將 SL1 文件另存爲:"
#: src/slic3r/GUI/Plater.cpp:3397
#, c-format
msgid "STL file exported to %s"
msgstr "STL 文件導出到 %s"
#: src/slic3r/GUI/Plater.cpp:3413
#, c-format
msgid "AMF file exported to %s"
msgstr "AMF 文件導出到 %s"
#: src/slic3r/GUI/Plater.cpp:3416
#, c-format
msgid "Error exporting AMF file %s"
msgstr "導出 AMF 文件 %s 時出錯"
#: src/slic3r/GUI/Plater.cpp:3442
#, c-format
msgid "3MF file exported to %s"
msgstr "3MF 文件導出到 %s"
#: src/slic3r/GUI/Plater.cpp:3445
#, c-format
msgid "Error exporting 3MF file %s"
msgstr "導出3MF 文件 %s 時出錯"
#: src/slic3r/GUI/Plater.cpp:3673
msgid "Export"
msgstr "導出"
#: src/slic3r/GUI/Plater.cpp:3674
msgid "Send G-code"
msgstr "發送 G 代碼"
#: src/slic3r/GUI/Preferences.cpp:17 src/slic3r/GUI/Tab.cpp:1762
#: src/slic3r/GUI/Tab.cpp:1963
msgid "General"
msgstr "常規"
#: src/slic3r/GUI/Preferences.cpp:34
msgid "Remember output directory"
msgstr "記住輸出目錄"
#: src/slic3r/GUI/Preferences.cpp:36
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""
"如果啓用此功能, Slic3r 將提示最後一個輸出目錄, 而不是包含輸入文件的目錄。"
#: src/slic3r/GUI/Preferences.cpp:42
msgid "Auto-center parts"
msgstr "自動居中部件"
#: src/slic3r/GUI/Preferences.cpp:44
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr "如果啓用此功能, Slic3r 將在列印牀中心周圍自動居中對象。"
#: src/slic3r/GUI/Preferences.cpp:50
msgid "Background processing"
msgstr "後臺處理"
#: src/slic3r/GUI/Preferences.cpp:52
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""
"如果啓用此功能, Slic3r 將在加載對象後立即對其進行預處理, 以便在導出 G-code "
"時節省時間。"
#: src/slic3r/GUI/Preferences.cpp:74
msgid "Suppress \" - default - \" presets"
msgstr "禁止 \"-默認-\" 預設"
#: src/slic3r/GUI/Preferences.cpp:76
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""
"在 \"列印/耗材絲/印表機\" 選擇中禁止 \"-默認-\" 預設, 一旦有任何其他有效的預"
"設可用。"
#: src/slic3r/GUI/Preferences.cpp:82
msgid "Show incompatible print and filament presets"
msgstr "顯示不兼容的列印和耗材絲預設"
#: src/slic3r/GUI/Preferences.cpp:84
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""
"選中後, 列印和耗材絲預設將顯示在預設編輯器中, 即使它們被標記爲與活動印表機不"
"兼容"
#: src/slic3r/GUI/Preferences.cpp:91
msgid "Use legacy OpenGL 1.1 rendering"
msgstr "使用舊版 OpenGL 1.1 渲染"
#: src/slic3r/GUI/Preferences.cpp:93
msgid ""
"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
"try to check this checkbox. This will disable the layer height editing and "
"anti aliasing, so it is likely better to upgrade your graphics driver."
msgstr ""
"如果您有由錯誤 OpenGL 2.0 驅動程序引起的呈現問題, 您可以嘗試選中此複選框。這"
"將禁用圖層高度編輯和抗鋸齒, 因此升級圖形驅動程序可能更好。"
#: src/slic3r/GUI/Preferences.cpp:101
msgid "Use Retina resolution for the 3D scene"
msgstr "對3D 場景使用視網膜分辨率"
#: src/slic3r/GUI/Preferences.cpp:103
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""
"如果啓用, 3D 場景將以視網膜分辨率呈現。如果您遇到3D 性能問題, 禁用此選項可能"
"會有所幫助。"
#: src/slic3r/GUI/Preferences.cpp:126
msgid "You need to restart Slic3r to make the changes effective."
msgstr "您需要重新啓動 Slic3r 才能使更改生效。"
#: src/slic3r/GUI/Preset.cpp:207
msgid "modified"
msgstr "修改"
#: src/slic3r/GUI/Preset.cpp:918 src/slic3r/GUI/Preset.cpp:958
#: src/slic3r/GUI/Preset.cpp:1011 src/slic3r/GUI/Preset.cpp:1043
#: src/slic3r/GUI/PresetBundle.cpp:1484 src/slic3r/GUI/PresetBundle.cpp:1537
msgid "System presets"
msgstr "系統預設"
#: src/slic3r/GUI/Preset.cpp:962 src/slic3r/GUI/Preset.cpp:1047
#: src/slic3r/GUI/PresetBundle.cpp:1542
msgid "User presets"
msgstr "用戶預設"
#: src/slic3r/GUI/Preset.cpp:991 src/slic3r/GUI/Tab.cpp:247
msgid "Add a new printer"
msgstr "添加新印表機"
#: src/slic3r/GUI/Preset.cpp:1251
msgid "filament"
msgstr "耗材"
#: src/slic3r/GUI/PresetHints.cpp:28
#, c-format
msgid ""
"If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
"will be reduced so that no less than %ds are spent on that layer (however, "
"speed will never be reduced below %dmm/s)."
msgstr ""
"如果估計圖層時間低於 ~%ds, 風扇將以 %d%% 運行, 列印速度將降低, 從而在該圖層上"
"花費的時間不低於 %ds (但是, 速度永遠不會降低到 %dmm/s 以下)。"
#: src/slic3r/GUI/PresetHints.cpp:32
#, c-format
msgid ""
"\n"
"If estimated layer time is greater, but still below ~%ds, fan will run at a "
"proportionally decreasing speed between %d%% and %d%%."
msgstr ""
"\n"
"如果估計圖層時間較大, 但仍低於 ~%ds, 則風扇將以 %d%% 和 %d%% 之間按比例減少"
"的速度運行。"
#: src/slic3r/GUI/PresetHints.cpp:36
msgid ""
"\n"
"During the other layers, fan "
msgstr ""
"\n"
"在其他圖層中, 風扇 "
#: src/slic3r/GUI/PresetHints.cpp:38
msgid "Fan "
msgstr "風扇 "
#: src/slic3r/GUI/PresetHints.cpp:43
#, c-format
msgid "will always run at %d%% "
msgstr "將始終以 %d%% 運行 "
#: src/slic3r/GUI/PresetHints.cpp:46
#, c-format
msgid "except for the first %d layers"
msgstr "除了第一個 %d 層"
#: src/slic3r/GUI/PresetHints.cpp:50
msgid "except for the first layer"
msgstr "除第一層外"
#: src/slic3r/GUI/PresetHints.cpp:52
msgid "will be turned off."
msgstr "將被關閉。"
#: src/slic3r/GUI/PresetHints.cpp:153
msgid "external perimeters"
msgstr "外圍輪廓"
#: src/slic3r/GUI/PresetHints.cpp:162
msgid "perimeters"
msgstr "輪廓"
#: src/slic3r/GUI/PresetHints.cpp:171
msgid "infill"
msgstr "填充"
#: src/slic3r/GUI/PresetHints.cpp:181
msgid "solid infill"
msgstr "實心填充"
#: src/slic3r/GUI/PresetHints.cpp:189
msgid "top solid infill"
msgstr "頂部實心填充"
#: src/slic3r/GUI/PresetHints.cpp:200
msgid "support"
msgstr "支持"
#: src/slic3r/GUI/PresetHints.cpp:210
msgid "support interface"
msgstr "支撐面"
#: src/slic3r/GUI/PresetHints.cpp:216
msgid "First layer volumetric"
msgstr "首層流量"
#: src/slic3r/GUI/PresetHints.cpp:216
msgid "Bridging volumetric"
msgstr "橋接流量"
#: src/slic3r/GUI/PresetHints.cpp:216
msgid "Volumetric"
msgstr "體積"
#: src/slic3r/GUI/PresetHints.cpp:217
msgid " flow rate is maximized "
msgstr " 流量已經最大化 "
#: src/slic3r/GUI/PresetHints.cpp:220
msgid "by the print profile maximum"
msgstr "根據列印配置文件的最大值"
#: src/slic3r/GUI/PresetHints.cpp:221
msgid "when printing "
msgstr "當列印 "
#: src/slic3r/GUI/PresetHints.cpp:222
msgid " with a volumetric rate "
msgstr " 用流量速率 "
#: src/slic3r/GUI/PresetHints.cpp:226
#, c-format
msgid "%3.2f mm³/s"
msgstr "%3.2f mm³/s"
#: src/slic3r/GUI/PresetHints.cpp:228
#, c-format
msgid " at filament speed %3.2f mm/s."
msgstr " 耗材絲速度 %3.2f mm/s."
#: src/slic3r/GUI/PresetHints.cpp:247
msgid ""
"Recommended object thin wall thickness: Not available due to invalid layer "
"height."
msgstr "推薦物體薄壁厚度: 由於圖層高度無效, 不可用。"
#: src/slic3r/GUI/PresetHints.cpp:264
#, c-format
msgid "Recommended object thin wall thickness for layer height %.2f and "
msgstr "當層高度 %.2f 時建議的物體薄壁厚度爲 "
#: src/slic3r/GUI/PresetHints.cpp:271
#, c-format
msgid "%d lines: %.2lf mm"
msgstr "%d 圈: %.2lf 毫米"
#: src/slic3r/GUI/PrintHostDialogs.cpp:32
msgid "Send G-Code to printer host"
msgstr "向印表機主機發送 G-Code"
#: src/slic3r/GUI/PrintHostDialogs.cpp:32
msgid "Upload to Printer Host with the following filename:"
msgstr "使用以下文件名上載到印表機主機:"
#: src/slic3r/GUI/PrintHostDialogs.cpp:34
msgid "Start printing after upload"
msgstr "上傳後開始列印"
#: src/slic3r/GUI/PrintHostDialogs.cpp:41
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr "如果需要, 使用正向斜槓 (/) 作爲目錄分隔符。"
#: src/slic3r/GUI/PrintHostDialogs.cpp:157
msgid "Cancel selected"
msgstr "取消選定"
#: src/slic3r/GUI/PrintHostDialogs.cpp:159
msgid "Show error message"
msgstr "顯示錯誤消息"
#: src/slic3r/GUI/PrintHostDialogs.cpp:198
#: src/slic3r/GUI/PrintHostDialogs.cpp:217
msgid "Enqueued"
msgstr "加入隊列"
#: src/slic3r/GUI/PrintHostDialogs.cpp:218
msgid "Uploading"
msgstr "上傳中"
#: src/slic3r/GUI/PrintHostDialogs.cpp:222
msgid "Completed"
msgstr "已完成"
#: src/slic3r/GUI/PrintHostDialogs.cpp:260
msgid "Error uploading to print host:"
msgstr "上載到列印主機時出錯:"
#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr "完全不存在"
#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr "時間"
#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/RammingChart.cpp:81
#: src/slic3r/GUI/WipeTowerDialog.cpp:82 src/libslic3r/PrintConfig.cpp:611
#: src/libslic3r/PrintConfig.cpp:655 src/libslic3r/PrintConfig.cpp:670
#: src/libslic3r/PrintConfig.cpp:2241 src/libslic3r/PrintConfig.cpp:2250
#: src/libslic3r/PrintConfig.cpp:2308 src/libslic3r/PrintConfig.cpp:2315
msgid "s"
msgstr "s"
#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr "流量速度"
#: src/slic3r/GUI/SysInfoDialog.cpp:44
msgid "Slic3r Prusa Edition - System Information"
msgstr "Slic3r Prusa 版-系統信息"
#: src/slic3r/GUI/Tab.cpp:50 src/libslic3r/PrintConfig.cpp:228
msgid "Compatible printers"
msgstr "兼容的印表機"
#: src/slic3r/GUI/Tab.cpp:51
msgid "Select the printers this profile is compatible with."
msgstr "選擇與此配置文件兼容的印表機。"
#: src/slic3r/GUI/Tab.cpp:56 src/libslic3r/PrintConfig.cpp:243
msgid "Compatible print profiles"
msgstr "兼容的列印配置文件"
#: src/slic3r/GUI/Tab.cpp:57
msgid "Select the print profiles this profile is compatible with."
msgstr "選擇與此配置文件兼容的列印配置文件。"
#: src/slic3r/GUI/Tab.cpp:132
msgid "Save current "
msgstr "保存當前 "
#: src/slic3r/GUI/Tab.cpp:133
msgid "Delete this preset"
msgstr "刪除該預設"
#: src/slic3r/GUI/Tab.cpp:145
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""
"將光標懸停在按鈕上以查找更多信息\n"
"或單擊此按鈕。"
#: src/slic3r/GUI/Tab.cpp:858
msgid "It's a default preset."
msgstr "這是一個默認預設。"
#: src/slic3r/GUI/Tab.cpp:859
msgid "It's a system preset."
msgstr "這是一個系統預設。"
#: src/slic3r/GUI/Tab.cpp:860
msgid "Current preset is inherited from "
msgstr "當前預設繼承自 "
#: src/slic3r/GUI/Tab.cpp:865
msgid "It can't be deleted or modified. "
msgstr "它不能被刪除或修改. "
#: src/slic3r/GUI/Tab.cpp:866
msgid ""
"Any modifications should be saved as a new preset inherited from this one. "
msgstr "任何修改都應保存爲從當前配置繼承的新預設. "
#: src/slic3r/GUI/Tab.cpp:867
msgid "To do that please specify a new name for the preset."
msgstr "爲此, 請爲預設指定新名稱。"
#: src/slic3r/GUI/Tab.cpp:871
msgid "Additional information:"
msgstr "附加信息："
#: src/slic3r/GUI/Tab.cpp:877
msgid "printer model"
msgstr "印表機型號"
#: src/slic3r/GUI/Tab.cpp:885
msgid "default print profile"
msgstr "默認 SLA 列印配置文件"
#: src/slic3r/GUI/Tab.cpp:888
msgid "default filament profile"
msgstr "默認耗材絲配置"
#: src/slic3r/GUI/Tab.cpp:902
msgid "default SLA material profile"
msgstr "默認 SLA 材料配置文件"
#: src/slic3r/GUI/Tab.cpp:906
msgid "default SLA print profile"
msgstr "默認 SLA 列印配置文件"
#: src/slic3r/GUI/Tab.cpp:948 src/slic3r/GUI/Tab.cpp:3303
msgid "Layers and perimeters"
msgstr "層和輪廓"
#: src/slic3r/GUI/Tab.cpp:949 src/libslic3r/PrintConfig.cpp:55
msgid "Layer height"
msgstr "層高"
#: src/slic3r/GUI/Tab.cpp:953
msgid "Vertical shells"
msgstr "垂直外殼"
#: src/slic3r/GUI/Tab.cpp:964
msgid "Horizontal shells"
msgstr "水平外殼"
#: src/slic3r/GUI/Tab.cpp:965 src/libslic3r/PrintConfig.cpp:1709
msgid "Solid layers"
msgstr "可靠層數"
#: src/slic3r/GUI/Tab.cpp:970
msgid "Quality (slower slicing)"
msgstr "質量 (慢切)"
#: src/slic3r/GUI/Tab.cpp:988
msgid "Reducing printing time"
msgstr "縮短列印時間"
#: src/slic3r/GUI/Tab.cpp:1000
msgid "Skirt and brim"
msgstr "環邊和裙邊"
#: src/slic3r/GUI/Tab.cpp:1017
msgid "Raft"
msgstr "基座"
#: src/slic3r/GUI/Tab.cpp:1021
msgid "Options for support material and raft"
msgstr "支撐材料和基座的選項"
#: src/slic3r/GUI/Tab.cpp:1036
msgid "Speed for print moves"
msgstr "列印移動的速度"
#: src/slic3r/GUI/Tab.cpp:1048
msgid "Speed for non-print moves"
msgstr "非列印移動的速度"
#: src/slic3r/GUI/Tab.cpp:1051
msgid "Modifiers"
msgstr "武器性能修改"
#: src/slic3r/GUI/Tab.cpp:1054
msgid "Acceleration control (advanced)"
msgstr "加速控制 (高級)"
#: src/slic3r/GUI/Tab.cpp:1061
msgid "Autospeed (advanced)"
msgstr "自動調速 (高級)"
#: src/slic3r/GUI/Tab.cpp:1069
msgid "Multiple Extruders"
msgstr "多個擠出頭"
#: src/slic3r/GUI/Tab.cpp:1077
msgid "Ooze prevention"
msgstr "Ooze 預防"
#: src/slic3r/GUI/Tab.cpp:1094
msgid "Extrusion width"
msgstr "擠出寬度"
#: src/slic3r/GUI/Tab.cpp:1104
msgid "Overlap"
msgstr "交疊"
#: src/slic3r/GUI/Tab.cpp:1107
msgid "Flow"
msgstr "流量"
#: src/slic3r/GUI/Tab.cpp:1116
msgid "Other"
msgstr "其他"
#: src/slic3r/GUI/Tab.cpp:1119 src/slic3r/GUI/Tab.cpp:3351
msgid "Output options"
msgstr "輸出選項"
#: src/slic3r/GUI/Tab.cpp:1120
msgid "Sequential printing"
msgstr "順序列印"
#: src/slic3r/GUI/Tab.cpp:1122
msgid "Extruder clearance (mm)"
msgstr "擠出機間隙 (毫米)"
#: src/slic3r/GUI/Tab.cpp:1131 src/slic3r/GUI/Tab.cpp:3352
msgid "Output file"
msgstr "輸出文件"
#: src/slic3r/GUI/Tab.cpp:1138 src/libslic3r/PrintConfig.cpp:1382
msgid "Post-processing scripts"
msgstr "後處理腳本"
#: src/slic3r/GUI/Tab.cpp:1144 src/slic3r/GUI/Tab.cpp:1145
#: src/slic3r/GUI/Tab.cpp:1527 src/slic3r/GUI/Tab.cpp:1528
#: src/slic3r/GUI/Tab.cpp:1935 src/slic3r/GUI/Tab.cpp:1936
#: src/slic3r/GUI/Tab.cpp:2027 src/slic3r/GUI/Tab.cpp:2028
#: src/slic3r/GUI/Tab.cpp:3240 src/slic3r/GUI/Tab.cpp:3241
msgid "Notes"
msgstr "備註"
#: src/slic3r/GUI/Tab.cpp:1151 src/slic3r/GUI/Tab.cpp:1535
#: src/slic3r/GUI/Tab.cpp:1942 src/slic3r/GUI/Tab.cpp:2034
#: src/slic3r/GUI/Tab.cpp:3248 src/slic3r/GUI/Tab.cpp:3357
msgid "Dependencies"
msgstr "依賴"
#: src/slic3r/GUI/Tab.cpp:1152 src/slic3r/GUI/Tab.cpp:1536
#: src/slic3r/GUI/Tab.cpp:1943 src/slic3r/GUI/Tab.cpp:2035
#: src/slic3r/GUI/Tab.cpp:3249 src/slic3r/GUI/Tab.cpp:3358
msgid "Profile dependencies"
msgstr "配置文件依賴"
#: src/slic3r/GUI/Tab.cpp:1198
#, no-c-format
msgid ""
"The Spiral Vase mode requires:\n"
"- one perimeter\n"
"- no top solid layers\n"
"- 0% fill density\n"
"- no support material\n"
"- no ensure_vertical_shell_thickness\n"
"\n"
"Shall I adjust those settings in order to enable Spiral Vase?"
msgstr ""
"螺旋花瓶模式需要：\n"
" - 單層邊界\n"
" - 沒有頂層固體層\n"
" - 0％填充密度\n"
" - 沒有支持材料\n"
" - 沒有ensure_vertical_shell_thickness\n"
"\n"
"我可以調整這些設置以啓用Spiral Vase嗎？"
#: src/slic3r/GUI/Tab.cpp:1205
msgid "Spiral Vase"
msgstr "螺旋式容器"
#: src/slic3r/GUI/Tab.cpp:1228
msgid ""
"The Wipe Tower currently supports the non-soluble supports only\n"
"if they are printed with the current extruder without triggering a tool "
"change.\n"
"(both support_material_extruder and support_material_interface_extruder need "
"to be set to 0).\n"
"\n"
"Shall I adjust those settings in order to enable the Wipe Tower?"
msgstr ""
"擦拭塔目前支持非溶性支撐僅適用於\n"
"使用當前擠出機列印並且不會觸發工具更改的情況。\n"
"(支撐材料 _ 擠出機和支撐材料 _ 接口 _ 擠出機都需要設置爲 0)。\n"
"\n"
"要我調整這些設置以啓用 \"擦拭塔\" 嗎？"
#: src/slic3r/GUI/Tab.cpp:1232 src/slic3r/GUI/Tab.cpp:1249
msgid "Wipe Tower"
msgstr "擦料塔"
#: src/slic3r/GUI/Tab.cpp:1246
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers\n"
"need to be synchronized with the object layers.\n"
"\n"
"Shall I synchronize support layers in order to enable the Wipe Tower?"
msgstr ""
"要使擦料塔與可溶性支撐配合使用, 支撐層需要與對象圖層同步。\n"
"\n"
"是否應同步支撐圖層以啓用擦料塔？"
#: src/slic3r/GUI/Tab.cpp:1264
msgid ""
"Supports work better, if the following feature is enabled:\n"
"- Detect bridging perimeters\n"
"\n"
"Shall I adjust those settings for supports?"
msgstr ""
"如果啓用了以下功能, 則支撐工作更好:\n"
"-檢測橋接邊界\n"
"\n"
"是否應爲支撐調整這些設置？"
#: src/slic3r/GUI/Tab.cpp:1267
msgid "Support Generator"
msgstr "支撐生成器"
#: src/slic3r/GUI/Tab.cpp:1309
msgid "The "
msgstr "這個 "
#: src/slic3r/GUI/Tab.cpp:1309
#, no-c-format
msgid ""
" infill pattern is not supposed to work at 100% density.\n"
"\n"
"Shall I switch to rectilinear fill pattern?"
msgstr ""
" 填充模式不應該在100% 密度下工作。\n"
"\n"
"我應該切換到直線填充圖案嗎？"
#: src/slic3r/GUI/Tab.cpp:1429
msgid "Temperature "
msgstr "溫度 "
#: src/slic3r/GUI/Tab.cpp:1435
msgid "Bed"
msgstr "牀"
#: src/slic3r/GUI/Tab.cpp:1440
msgid "Cooling"
msgstr "冷卻"
#: src/slic3r/GUI/Tab.cpp:1441 src/libslic3r/PrintConfig.cpp:1285
#: src/libslic3r/PrintConfig.cpp:2097
msgid "Enable"
msgstr "使能"
#: src/slic3r/GUI/Tab.cpp:1452
msgid "Fan settings"
msgstr "風扇設置"
#: src/slic3r/GUI/Tab.cpp:1453
msgid "Fan speed"
msgstr "風扇速度"
#: src/slic3r/GUI/Tab.cpp:1461
msgid "Cooling thresholds"
msgstr "冷卻閾值"
#: src/slic3r/GUI/Tab.cpp:1467
msgid "Filament properties"
msgstr "耗材絲特性"
#: src/slic3r/GUI/Tab.cpp:1471
msgid "Print speed override"
msgstr "列印速度覆蓋"
#: src/slic3r/GUI/Tab.cpp:1481
msgid "Toolchange parameters with single extruder MM printers"
msgstr "單擠出機 MM 印表機的工具更換參數"
#: src/slic3r/GUI/Tab.cpp:1496
msgid "Ramming settings"
msgstr "衝壓設置"
#: src/slic3r/GUI/Tab.cpp:1514 src/slic3r/GUI/Tab.cpp:1898
msgid "Custom G-code"
msgstr "自定義 G-code"
#: src/slic3r/GUI/Tab.cpp:1515 src/slic3r/GUI/Tab.cpp:1899
#: src/libslic3r/PrintConfig.cpp:1735 src/libslic3r/PrintConfig.cpp:1750
msgid "Start G-code"
msgstr "起始G代碼"
#: src/slic3r/GUI/Tab.cpp:1521 src/slic3r/GUI/Tab.cpp:1905
#: src/libslic3r/PrintConfig.cpp:358 src/libslic3r/PrintConfig.cpp:368
msgid "End G-code"
msgstr "結尾G代碼"
#: src/slic3r/GUI/Tab.cpp:1632 src/slic3r/GUI/Tab.cpp:1689
msgid " Browse "
msgstr " 瀏覽 "
#: src/slic3r/GUI/Tab.cpp:1651 src/slic3r/GUI/Tab.cpp:1838
msgid "Test"
msgstr "測試"
#: src/slic3r/GUI/Tab.cpp:1662
msgid "Could not get a valid Printer Host reference"
msgstr "無法獲取有效的印表機主機引用"
#: src/slic3r/GUI/Tab.cpp:1668 src/slic3r/GUI/Tab.cpp:1851
msgid "Success!"
msgstr "成功！"
#: src/slic3r/GUI/Tab.cpp:1683
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"HTTPS CA 文件是可選的。只有在使用帶有自簽名證書的 HTTPS 時, 才需要使用它。"
#: src/slic3r/GUI/Tab.cpp:1696
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr "證書文件 (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
#: src/slic3r/GUI/Tab.cpp:1697
msgid "Open CA certificate file"
msgstr "打開 CA 證書文件"
#: src/slic3r/GUI/Tab.cpp:1725
msgid ""
"HTTPS CA File:\n"
"\tOn this system, Slic3r uses HTTPS certificates from the system Certificate "
"Store or Keychain.\n"
"\tTo use a custom CA file, please import your CA file into Certificate "
"Store / Keychain."
msgstr ""
"HTTPS CA 文件:\n"
"\t在此係統上, Slic3r 使用來自系統證書存儲或鑰匙串的 https 證書。\n"
"\t要使用自定義 CA 文件, 請將 CA 文件導入到證書存儲/鑰匙串。"
#: src/slic3r/GUI/Tab.cpp:1763 src/slic3r/GUI/Tab.cpp:1964
msgid "Size and coordinates"
msgstr "尺寸和座標"
#: src/slic3r/GUI/Tab.cpp:1767 src/slic3r/GUI/Tab.cpp:1968
#: src/slic3r/GUI/Tab.cpp:2911
msgid " Set "
msgstr " 設置 "
#: src/slic3r/GUI/Tab.cpp:1790
msgid "Capabilities"
msgstr "權限"
#: src/slic3r/GUI/Tab.cpp:1795
msgid "Number of extruders of the printer."
msgstr "印表機擠出機的數量。"
#: src/slic3r/GUI/Tab.cpp:1823
msgid "USB/Serial connection"
msgstr "串行連接"
#: src/slic3r/GUI/Tab.cpp:1824 src/libslic3r/PrintConfig.cpp:1590
msgid "Serial port"
msgstr "串行端口"
#: src/slic3r/GUI/Tab.cpp:1829
msgid "Rescan serial ports"
msgstr "重新掃描串行端口"
#: src/slic3r/GUI/Tab.cpp:1851
msgid "Connection to printer works correctly."
msgstr "與印表機的連接工作正常。"
#: src/slic3r/GUI/Tab.cpp:1854
msgid "Connection failed."
msgstr "連接失敗。"
#: src/slic3r/GUI/Tab.cpp:1867 src/slic3r/GUI/Tab.cpp:2022
msgid "Print Host upload"
msgstr "列印主機上傳隊列"
#: src/slic3r/GUI/Tab.cpp:1911 src/libslic3r/PrintConfig.cpp:128
msgid "Before layer change G-code"
msgstr "層改變前的G代碼"
#: src/slic3r/GUI/Tab.cpp:1917 src/libslic3r/PrintConfig.cpp:1030
msgid "After layer change G-code"
msgstr "層變化後G代碼"
#: src/slic3r/GUI/Tab.cpp:1923 src/libslic3r/PrintConfig.cpp:2005
msgid "Tool change G-code"
msgstr "切換工具G代碼"
#: src/slic3r/GUI/Tab.cpp:1929
msgid "Between objects G-code (for sequential printing)"
msgstr "模型對象之間的 G-code (用於順序列印)"
#: src/slic3r/GUI/Tab.cpp:1990
msgid "Display"
msgstr "顯示"
#: src/slic3r/GUI/Tab.cpp:2001
msgid "Tilt"
msgstr "傾斜"
#: src/slic3r/GUI/Tab.cpp:2002
msgid "Tilt time"
msgstr "傾斜時間"
#: src/slic3r/GUI/Tab.cpp:2008 src/slic3r/GUI/Tab.cpp:3223
msgid "Corrections"
msgstr "修正"
#: src/slic3r/GUI/Tab.cpp:2074 src/slic3r/GUI/Tab.cpp:2136
#: src/libslic3r/PrintConfig.cpp:1076 src/libslic3r/PrintConfig.cpp:1086
#: src/libslic3r/PrintConfig.cpp:1096 src/libslic3r/PrintConfig.cpp:1109
#: src/libslic3r/PrintConfig.cpp:1120 src/libslic3r/PrintConfig.cpp:1131
#: src/libslic3r/PrintConfig.cpp:1142
msgid "Machine limits"
msgstr "機器限制"
#: src/slic3r/GUI/Tab.cpp:2088
msgid "Values in this column are for Full Power mode"
msgstr "此列中的值適用於 \"全功率\" 模式"
#: src/slic3r/GUI/Tab.cpp:2089
msgid "Full Power"
msgstr "全功率"
#: src/slic3r/GUI/Tab.cpp:2094
msgid "Values in this column are for Silent mode"
msgstr "此列中的值適用於 \"靜音” 模式"
#: src/slic3r/GUI/Tab.cpp:2095
msgid "Silent"
msgstr "靜音"
#: src/slic3r/GUI/Tab.cpp:2103
msgid "Maximum feedrates"
msgstr "最大進給率"
#: src/slic3r/GUI/Tab.cpp:2108
msgid "Maximum accelerations"
msgstr "最大加速度"
#: src/slic3r/GUI/Tab.cpp:2115
msgid "Jerk limits"
msgstr "抖動限制"
#: src/slic3r/GUI/Tab.cpp:2120
msgid "Minimum feedrates"
msgstr "最小進給率"
#: src/slic3r/GUI/Tab.cpp:2158 src/slic3r/GUI/Tab.cpp:2166
msgid "Single extruder MM setup"
msgstr "單擠出機 MM 設置"
#: src/slic3r/GUI/Tab.cpp:2167
msgid "Single extruder multimaterial parameters"
msgstr "單擠出機多材料參數"
#: src/slic3r/GUI/Tab.cpp:2181 src/libslic3r/GCode/PreviewData.cpp:475
#, c-format
msgid "Extruder %d"
msgstr "擠出頭 %d"
#: src/slic3r/GUI/Tab.cpp:2188
msgid "Layer height limits"
msgstr "層高度限制"
#: src/slic3r/GUI/Tab.cpp:2193
msgid "Position (for multi-extruder printers)"
msgstr "位置 (適用於多擠出機印表機)"
#: src/slic3r/GUI/Tab.cpp:2196
msgid "Retraction"
msgstr "回縮"
#: src/slic3r/GUI/Tab.cpp:2199
msgid "Only lift Z"
msgstr "僅提升 Z"
#: src/slic3r/GUI/Tab.cpp:2212
msgid ""
"Retraction when tool is disabled (advanced settings for multi-extruder "
"setups)"
msgstr "禁用工具時的回縮 (多擠出機設置的高級設置)"
#: src/slic3r/GUI/Tab.cpp:2216
msgid "Preview"
msgstr "預覽"
#: src/slic3r/GUI/Tab.cpp:2352
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""
"使用固件回抽模式時, \"擦除\" 選項不可用。\n"
"\n"
"要禁用它以啓用固件回抽嗎？"
#: src/slic3r/GUI/Tab.cpp:2354
msgid "Firmware Retraction"
msgstr "固件回縮"
#: src/slic3r/GUI/Tab.cpp:2681
#, c-format
msgid "Default preset (%s)"
msgstr "默認預設 (%s)"
#: src/slic3r/GUI/Tab.cpp:2682
#, c-format
msgid "Preset (%s)"
msgstr "預設 (%s)"
#: src/slic3r/GUI/Tab.cpp:2699
msgid "has the following unsaved changes:"
msgstr "具有以下未保存的更改:"
#: src/slic3r/GUI/Tab.cpp:2702
msgid "is not compatible with printer"
msgstr "與印表機不兼容"
#: src/slic3r/GUI/Tab.cpp:2703
msgid "is not compatible with print profile"
msgstr "與列印配置文件不兼容"
#: src/slic3r/GUI/Tab.cpp:2705
msgid "and it has the following unsaved changes:"
msgstr "並具有以下未保存的更改:"
#: src/slic3r/GUI/Tab.cpp:2708
msgid "Discard changes and continue anyway?"
msgstr "是否放棄更改並繼續？"
#: src/slic3r/GUI/Tab.cpp:2709
msgid "Unsaved Changes"
msgstr "未保存的更改"
#: src/slic3r/GUI/Tab.cpp:2721
msgid "Please check your object list before preset changing."
msgstr "在預設更改之前, 請檢查對象列表。"
#: src/slic3r/GUI/Tab.cpp:2801
msgid "Copy"
msgstr "複製"
#: src/slic3r/GUI/Tab.cpp:2823
msgid "The supplied name is empty. It can't be saved."
msgstr "提供的名稱爲空。無法保存。"
#: src/slic3r/GUI/Tab.cpp:2828
msgid "Cannot overwrite a system profile."
msgstr "無法覆蓋系統配置文件。"
#: src/slic3r/GUI/Tab.cpp:2832
msgid "Cannot overwrite an external profile."
msgstr "無法覆蓋外部配置文件。"
#: src/slic3r/GUI/Tab.cpp:2858
msgid "remove"
msgstr "移除"
#: src/slic3r/GUI/Tab.cpp:2858
msgid "delete"
msgstr "刪除"
#: src/slic3r/GUI/Tab.cpp:2859
msgid "Are you sure you want to "
msgstr "你確定你想要 "
#: src/slic3r/GUI/Tab.cpp:2859
msgid " the selected preset?"
msgstr " 選中的部分？"
#: src/slic3r/GUI/Tab.cpp:2860
msgid "Remove"
msgstr "移除"
#: src/slic3r/GUI/Tab.cpp:2861
msgid " Preset"
msgstr " 預設"
#: src/slic3r/GUI/Tab.cpp:2989
msgid ""
"LOCKED LOCK;indicates that the settings are the same as the system values "
"for the current option group"
msgstr "鎖定的鎖; 表示設置與當前選項組的系統值相同"
#: src/slic3r/GUI/Tab.cpp:2992
msgid ""
"UNLOCKED LOCK;indicates that some settings were changed and are not equal to "
"the system values for the current option group.\n"
"Click the UNLOCKED LOCK icon to reset all settings for current option group "
"to the system values."
msgstr ""
"未鎖定的鎖; 表示某些設置已更改, 並且不等於當前選項組的系統值。\n"
"單擊 \"未鎖定的鎖\" 圖標, 將當前選項組的所有設置重置爲系統值。"
#: src/slic3r/GUI/Tab.cpp:2998
msgid ""
"WHITE BULLET;for the left button: \tindicates a non-system preset,\n"
"for the right button: \tindicates that the settings hasn't been modified."
msgstr ""
"白色彈頭; 對於左側按鈕: \t表示非系統預設,\n"
"對於右側按鈕: \t表示設置尚未被修改。"
#: src/slic3r/GUI/Tab.cpp:3002
msgid ""
"BACK ARROW;indicates that the settings were changed and are not equal to the "
"last saved preset for the current option group.\n"
"Click the BACK ARROW icon to reset all settings for the current option group "
"to the last saved preset."
msgstr ""
"返回箭頭; 表示設置已更改, 不等於當前選項組的上一次保存的預設。\n"
"單擊 \"返回箭頭\" 圖標, 將當前選項組的所有設置重置爲上次保存的預設。"
#: src/slic3r/GUI/Tab.cpp:3028
msgid ""
"LOCKED LOCK icon indicates that the settings are the same as the system "
"values for the current option group"
msgstr "鎖定的鎖圖標表示設置與當前選項組的系統值相同"
#: src/slic3r/GUI/Tab.cpp:3030
msgid ""
"UNLOCKED LOCK icon indicates that some settings were changed and are not "
"equal to the system values for the current option group.\n"
"Click to reset all settings for current option group to the system values."
msgstr ""
"\"未鎖定的鎖\" 圖標表示某些設置已更改, 並且與當前選項組的系統值不相等。\n"
"單擊可將當前選項組的所有設置重置爲系統值。"
#: src/slic3r/GUI/Tab.cpp:3033
msgid "WHITE BULLET icon indicates a non system preset."
msgstr "白色彈頭圖標表示非系統預設。"
#: src/slic3r/GUI/Tab.cpp:3036
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr "白色子彈圖標表示設置與當前選項組上次保存的預設中的設置相同。"
#: src/slic3r/GUI/Tab.cpp:3038
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""
"\"後退箭頭\" 圖標表示設置已更改, 與當前選項組的上次保存的預設不相等。\n"
"單擊可將當前選項組的所有設置重置爲上次保存的預設。"
#: src/slic3r/GUI/Tab.cpp:3044
msgid ""
"LOCKED LOCK icon indicates that the value is the same as the system value."
msgstr "鎖定的鎖圖標表示該值與系統值相同。"
#: src/slic3r/GUI/Tab.cpp:3045
msgid ""
"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
"the system value.\n"
"Click to reset current value to the system value."
msgstr ""
"未鎖定的鎖圖標表示該值已更改, 且不等於系統值。\n"
"單擊可將當前值重置爲系統值。"
#: src/slic3r/GUI/Tab.cpp:3051
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr "白色子彈圖標表示該值與上次保存的預設中的值相同。"
#: src/slic3r/GUI/Tab.cpp:3052
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""
"\"後退箭頭\" 圖標表示該值已更改, 不等於上次保存的預設。\n"
"單擊可將當前值重置爲上次保存的預設。"
#: src/slic3r/GUI/Tab.cpp:3152
msgid " as:"
msgstr " 爲:"
#: src/slic3r/GUI/Tab.cpp:3196
msgid "the following postfix are not allowed:"
msgstr "不允許使用以下後綴:"
#: src/slic3r/GUI/Tab.cpp:3200
msgid "The supplied name is not available."
msgstr "提供的名稱不可用。"
#: src/slic3r/GUI/Tab.cpp:3213
msgid "Material"
msgstr "材料"
#: src/slic3r/GUI/Tab.cpp:3215 src/slic3r/GUI/Tab.cpp:3305
msgid "Layers"
msgstr "圖層"
#: src/slic3r/GUI/Tab.cpp:3219
msgid "Exposure"
msgstr "曝光"
#: src/slic3r/GUI/Tab.cpp:3313
msgid "Support head"
msgstr "支撐頭部寬度"
#: src/slic3r/GUI/Tab.cpp:3318
msgid "Support pillar"
msgstr "支撐支柱"
#: src/slic3r/GUI/Tab.cpp:3328
msgid "Connection of the support sticks and junctions"
msgstr "支撐杆和連接點的連接"
#: src/slic3r/GUI/Tab.cpp:3333
msgid "Automatic generation"
msgstr "自動生成"
#: src/slic3r/GUI/Tab.cpp:3395
msgid "Head penetration should not be greater than the head width."
msgstr "頭部滲透不應大於頭部寬度。"
#: src/slic3r/GUI/Tab.cpp:3396
msgid "Invalid Head penetration"
msgstr "無效的頭部滲透"
#: src/slic3r/GUI/Tab.cpp:3408
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr "針頭直徑應小於柱直徑。"
#: src/slic3r/GUI/Tab.cpp:3409
msgid "Invalid pinhead diameter"
msgstr "針頭直徑無效"
#: src/slic3r/GUI/Tab.hpp:307 src/slic3r/GUI/Tab.hpp:395
msgid "Print Settings"
msgstr "列印設置"
#: src/slic3r/GUI/Tab.hpp:325
msgid "Filament Settings"
msgstr "耗材絲設置"
#: src/slic3r/GUI/Tab.hpp:358
msgid "Printer Settings"
msgstr "印表機設置"
#: src/slic3r/GUI/Tab.hpp:381
msgid "Material Settings"
msgstr "材料設置"
#: src/slic3r/GUI/Tab.hpp:407
msgid "Save preset"
msgstr "保存預設"
#: src/slic3r/GUI/UpdateDialogs.cpp:29
msgid "Update available"
msgstr "更新可用"
#: src/slic3r/GUI/UpdateDialogs.cpp:29
msgid "New version of Slic3r PE is available"
msgstr "新版本的 Slic3r PE 可用"
#: src/slic3r/GUI/UpdateDialogs.cpp:36
msgid "To download, follow the link below."
msgstr "要下載, 請點擊下面的鏈接。"
#: src/slic3r/GUI/UpdateDialogs.cpp:44
msgid "Current version:"
msgstr "當前版本:"
#: src/slic3r/GUI/UpdateDialogs.cpp:46
msgid "New version:"
msgstr "新版本："
#: src/slic3r/GUI/UpdateDialogs.cpp:54
msgid "Don't notify about new releases any more"
msgstr "不再通知有關新版本的信息"
#: src/slic3r/GUI/UpdateDialogs.cpp:72 src/slic3r/GUI/UpdateDialogs.cpp:164
msgid "Configuration update"
msgstr "配置更新"
#: src/slic3r/GUI/UpdateDialogs.cpp:72
msgid "Configuration update is available"
msgstr "配置更新可用"
#: src/slic3r/GUI/UpdateDialogs.cpp:75
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"是否要安裝它？\n"
"\n"
"請注意, 將首先創建完整的配置快照。如果新版本有問題, 可以隨時對其進行還原。\n"
"\n"
"更新的配置包:"
#: src/slic3r/GUI/UpdateDialogs.cpp:111
msgid "Slic3r incompatibility"
msgstr "Slic3r 不兼容"
#: src/slic3r/GUI/UpdateDialogs.cpp:111
msgid "Slic3r configuration is incompatible"
msgstr "Slic3r 配置不兼容"
#: src/slic3r/GUI/UpdateDialogs.cpp:114
msgid ""
"This version of Slic3r PE is not compatible with currently installed "
"configuration bundles.\n"
"This probably happened as a result of running an older Slic3r PE after using "
"a newer one.\n"
"\n"
"You may either exit Slic3r and try again with a newer version, or you may re-"
"run the initial configuration. Doing so will create a backup snapshot of the "
"existing configuration before installing files compatible with this Slic3r.\n"
msgstr ""
"此版本的 Slic3r PE 與當前安裝的配置包不兼容。\n"
"這可能是由於在使用較新的 Slic3r pe 後運行了較舊的 Slic3r PE。\n"
"\n"
"您可以退出 Slic3r 並使用較新的版本重試, 也可以重新運行初始配置。這樣做將在安"
"裝與此 Slic3r 兼容的文件之前創建現有配置的備份快照。\n"
#: src/slic3r/GUI/UpdateDialogs.cpp:123
#, c-format
msgid "This Slic3r PE version: %s"
msgstr "當前 Slic3r PE 版本: %s"
#: src/slic3r/GUI/UpdateDialogs.cpp:128
msgid "Incompatible bundles:"
msgstr "不兼容的包:"
#: src/slic3r/GUI/UpdateDialogs.cpp:144
msgid "Exit Slic3r"
msgstr "退出 Slic3r"
#: src/slic3r/GUI/UpdateDialogs.cpp:147
msgid "Re-configure"
msgstr "重新配置"
#: src/slic3r/GUI/UpdateDialogs.cpp:168
#, c-format
msgid ""
"Slic3r PE now uses an updated configuration structure.\n"
"\n"
"So called 'System presets' have been introduced, which hold the built-in "
"default settings for various printers. These System presets cannot be "
"modified, instead, users now may create their own presets inheriting "
"settings from one of the System presets.\n"
"An inheriting preset may either inherit a particular value from its parent "
"or override it with a customized value.\n"
"\n"
"Please proceed with the %s that follows to set up the new presets and to "
"choose whether to enable automatic preset updates."
msgstr ""
"Slic3r PE 現在使用更新的配置結構。\n"
"\n"
"所謂的 \"系統預設\" 已經引入, 它包含各種印表機的內置默認設置。無法修改這些系"
"統預設, 相反, 用戶現在可以創建自己的預設繼承從系統預設之一的設置。\n"
"繼承預設可以從其父級繼承特定值, 也可以使用自定義值覆蓋該值。\n"
"\n"
"請繼續下面的 %s, 以設置新的預設, 並選擇是否啓用自動預設更新。"
#: src/slic3r/GUI/UpdateDialogs.cpp:184
msgid "For more information please visit our wiki page:"
msgstr "欲瞭解更多信息, 請訪問我們的維基頁面:"
#: src/slic3r/GUI/WipeTowerDialog.cpp:14
msgid "Ramming customization"
msgstr "衝擊自定義"
#: src/slic3r/GUI/WipeTowerDialog.cpp:40
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""
"衝擊表示在單擠出機 MM 印表機的刀具更換之前的快速擠出。它的目的是正確地塑造卸"
"載的燈絲的末端, 這樣它就不會導致插入新的耗材絲卡住, 並且原耗材絲本身可以再重"
"新插入。這個階段很重要, 不同的材料可能需要不同的擠壓速度, 以獲得良好的形狀。"
"因此, 夯實衝擊過程中的擠出速率是可調的。\n"
"\n"
"這是一個專家級設置, 不正確的調整很可能會導致卡料, 擠出機砂輪磨耗材絲等。"
#: src/slic3r/GUI/WipeTowerDialog.cpp:82
msgid "Total ramming time"
msgstr "總衝擊時間"
#: src/slic3r/GUI/WipeTowerDialog.cpp:84
msgid "Total rammed volume"
msgstr "總衝擊量"
#: src/slic3r/GUI/WipeTowerDialog.cpp:88
msgid "Ramming line width"
msgstr "衝擊線寬度"
#: src/slic3r/GUI/WipeTowerDialog.cpp:90
msgid "Ramming line spacing"
msgstr "衝擊線行距"
#: src/slic3r/GUI/WipeTowerDialog.cpp:141
msgid "Wipe tower - Purging volume adjustment"
msgstr "擦拭塔-擠出清理體積調整"
#: src/slic3r/GUI/WipeTowerDialog.cpp:225
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr "在這裏, 您可以調整任何給定的對工具所需的清除體積 (mm³) 。"
#: src/slic3r/GUI/WipeTowerDialog.cpp:226
msgid "Extruder changed to"
msgstr "擠出機更改爲"
#: src/slic3r/GUI/WipeTowerDialog.cpp:234
msgid "unloaded"
msgstr "卸載"
#: src/slic3r/GUI/WipeTowerDialog.cpp:235
msgid "loaded"
msgstr "裝載"
#: src/slic3r/GUI/WipeTowerDialog.cpp:240
msgid "Tool #"
msgstr "工具 #"
#: src/slic3r/GUI/WipeTowerDialog.cpp:247
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr "總清除量是通過求和下面的兩個值來計算的, 具體取決於裝載/卸載的工具。"
#: src/slic3r/GUI/WipeTowerDialog.cpp:248
msgid "Volume to purge (mm³) when the filament is being"
msgstr "要清除的體積 (mm³) 當耗材正在被"
#: src/slic3r/GUI/WipeTowerDialog.cpp:262
msgid "From"
msgstr "從"
#: src/slic3r/GUI/WipeTowerDialog.cpp:327
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""
"切換到簡單設置將放棄在高級模式下所做的更改!\n"
"\n"
"要繼續嗎？"
#: src/slic3r/GUI/WipeTowerDialog.cpp:339
msgid "Show simplified settings"
msgstr "顯示簡單設置"
#: src/slic3r/GUI/WipeTowerDialog.cpp:339
msgid "Show advanced settings"
msgstr "顯示高級設置"
#: src/slic3r/GUI/wxExtensions.cpp:2398
#, c-format
msgid "Switch to the %s mode"
msgstr "切換到 %s 模式"
#: src/slic3r/GUI/wxExtensions.cpp:2399
#, c-format
msgid "Current mode is %s"
msgstr "當前模式爲 %s"
#: src/slic3r/Utils/Duet.cpp:51
msgid "Connection to Duet works correctly."
msgstr "與 Duet 的連接工作正常。"
#: src/slic3r/Utils/Duet.cpp:56
msgid "Could not connect to Duet"
msgstr "無法連接到 Duet"
#: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:154
msgid "Unknown error occured"
msgstr "發生未知錯誤"
#: src/slic3r/Utils/Duet.cpp:148
msgid "Wrong password"
msgstr "密碼錯誤"
#: src/slic3r/Utils/Duet.cpp:151
msgid "Could not get resources to create a new connection"
msgstr "無法獲取資源來創建新連接"
#: src/slic3r/Utils/OctoPrint.cpp:69
#, c-format
msgid "Mismatched type of print host: %s"
msgstr "列印主機類型不匹配: %s"
#: src/slic3r/Utils/OctoPrint.cpp:84
msgid "Connection to OctoPrint works correctly."
msgstr "與OctoPrint的連接工作正常。"
#: src/slic3r/Utils/OctoPrint.cpp:90
msgid "Could not connect to OctoPrint"
msgstr "無法連接到 OctoPrint"
#: src/slic3r/Utils/OctoPrint.cpp:90
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr "注意: 至少需要1.1.0 版本的 OctoPrint."
#: src/slic3r/Utils/OctoPrint.cpp:195
msgid "Connection to Prusa SLA works correctly."
msgstr "與 Prusa SLA 的連接工作正常。"
#: src/slic3r/Utils/OctoPrint.cpp:200
msgid "Could not connect to Prusa SLA"
msgstr "無法連接到 Prusa SLA"
#: src/slic3r/Utils/PresetUpdater.cpp:583
#, c-format
msgid "requires min. %s and max. %s"
msgstr "需要最小 %s 和最大 %s"
#: src/slic3r/Utils/PresetUpdater.cpp:588
#, c-format
msgid "requires min. %s"
msgstr "需要最小 %s"
#: src/slic3r/Utils/PresetUpdater.cpp:590
#, c-format
msgid "requires max. %s"
msgstr "需要最大 %s"
#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr "導出源模型"
#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr "加載輸入模型失敗。"
#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing model by the Netfabb service"
msgstr "基於 Netfabb 服務的修復模型"
#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr "網格修復失敗。"
#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Loading repaired model"
msgstr "裝載修復的模型"
#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr "將網格保存到 3MF 容器失敗。"
#: src/slic3r/Utils/FixModelByWin10.cpp:340
msgid "Model fixing"
msgstr "模型修復中"
#: src/slic3r/Utils/FixModelByWin10.cpp:341
msgid "Exporting model..."
msgstr "導出模型..."
#: src/slic3r/Utils/FixModelByWin10.cpp:368
msgid "Export of a temporary 3mf file failed"
msgstr "導出臨時 3mf 文件失敗"
#: src/slic3r/Utils/FixModelByWin10.cpp:383
msgid "Import of the repaired 3mf file failed"
msgstr "導入修復的 3mf 文件失敗"
#: src/slic3r/Utils/FixModelByWin10.cpp:385
msgid "Repaired 3MF file does not contain any object"
msgstr "已修復的3MF 文件不包含任何對象"
#: src/slic3r/Utils/FixModelByWin10.cpp:387
msgid "Repaired 3MF file contains more than one object"
msgstr "修復的3MF 文件包含多個對象"
#: src/slic3r/Utils/FixModelByWin10.cpp:389
msgid "Repaired 3MF file does not contain any volume"
msgstr "已修復的3MF 文件不包含任何卷"
#: src/slic3r/Utils/FixModelByWin10.cpp:391
msgid "Repaired 3MF file contains more than one volume"
msgstr "修復的3MF 文件包含多個卷"
#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Model repair finished"
msgstr "模型修復完成"
#: src/slic3r/Utils/FixModelByWin10.cpp:406
msgid "Model repair canceled"
msgstr "模型修復取消"
#: src/slic3r/Utils/FixModelByWin10.cpp:423
msgid "Model repaired successfully"
msgstr "模型已成功修復"
#: src/slic3r/Utils/FixModelByWin10.cpp:423
#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model Repair by the Netfabb service"
msgstr "通過 Netfabb 服務修復模型"
#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model repair failed: \n"
msgstr "模型修復失敗: \n"
#: src/libslic3r/Zipper.cpp:35
msgid "undefined error"
msgstr "未定義的錯誤"
#: src/libslic3r/Zipper.cpp:37
msgid "too many files"
msgstr "文件太多"
#: src/libslic3r/Zipper.cpp:39
msgid "file too large"
msgstr "文件太大"
#: src/libslic3r/Zipper.cpp:41
msgid "unsupported method"
msgstr "不支持的方法"
#: src/libslic3r/Zipper.cpp:43
msgid "unsupported encryption"
msgstr "不支持的加密"
#: src/libslic3r/Zipper.cpp:45
msgid "unsupported feature"
msgstr "不支持的功能"
#: src/libslic3r/Zipper.cpp:47
msgid "failed finding central directory"
msgstr "找不到中心目錄"
#: src/libslic3r/Zipper.cpp:49
msgid "not a ZIP archive"
msgstr "而不是 ZIP 存檔"
#: src/libslic3r/Zipper.cpp:51
msgid "invalid header or archive is corrupted"
msgstr "無效的標頭或存檔已損壞"
#: src/libslic3r/Zipper.cpp:53
msgid "unsupported multidisk archive"
msgstr "不支持的多磁盤存檔"
#: src/libslic3r/Zipper.cpp:55
msgid "decompression failed or archive is corrupted"
msgstr "解壓縮失敗或存檔已損壞"
#: src/libslic3r/Zipper.cpp:57
msgid "compression failed"
msgstr "壓縮失敗"
#: src/libslic3r/Zipper.cpp:59
msgid "unexpected decompressed size"
msgstr "意外解壓縮大小"
#: src/libslic3r/Zipper.cpp:61
msgid "CRC-32 check failed"
msgstr "CRC-32 檢查失敗"
#: src/libslic3r/Zipper.cpp:63
msgid "unsupported central directory size"
msgstr "不支持的中心目錄大小"
#: src/libslic3r/Zipper.cpp:65
msgid "allocation failed"
msgstr "燒錄失敗"
#: src/libslic3r/Zipper.cpp:67
msgid "file open failed"
msgstr "文件打開失敗"
#: src/libslic3r/Zipper.cpp:69
msgid "file create failed"
msgstr "文件創建失敗"
#: src/libslic3r/Zipper.cpp:71
msgid "file write failed"
msgstr "文件寫入失敗"
#: src/libslic3r/Zipper.cpp:73
msgid "file read failed"
msgstr "文件讀取失敗"
#: src/libslic3r/Zipper.cpp:75
msgid "file close failed"
msgstr "文件關閉失敗"
#: src/libslic3r/Zipper.cpp:77
msgid "file seek failed"
msgstr "文件查找失敗"
#: src/libslic3r/Zipper.cpp:79
msgid "file stat failed"
msgstr "文件統計失敗"
#: src/libslic3r/Zipper.cpp:81
msgid "invalid parameter"
msgstr "無效參數"
#: src/libslic3r/Zipper.cpp:83
msgid "invalid filename"
msgstr "無效的文件名"
#: src/libslic3r/Zipper.cpp:85
msgid "buffer too small"
msgstr "緩衝區太小"
#: src/libslic3r/Zipper.cpp:87
msgid "internal error"
msgstr "內部錯誤"
#: src/libslic3r/Zipper.cpp:89
msgid "file not found"
msgstr "文件未找到"
#: src/libslic3r/Zipper.cpp:91
msgid "archive is too large"
msgstr "存檔太大"
#: src/libslic3r/Zipper.cpp:93
msgid "validation failed"
msgstr "驗證失敗"
#: src/libslic3r/Zipper.cpp:95
msgid "write calledback failed"
msgstr "寫回失敗"
#: src/libslic3r/Zipper.cpp:105
msgid "Error with zip archive"
msgstr "Zip 存檔出錯"
#: src/libslic3r/SLA/SLASupportTree.cpp:2153
msgid "Starting"
msgstr "正在啓動"
#: src/libslic3r/SLA/SLASupportTree.cpp:2154
msgid "Filtering"
msgstr "篩選"
#: src/libslic3r/SLA/SLASupportTree.cpp:2155
msgid "Generate pinheads"
msgstr "生成針頭"
#: src/libslic3r/SLA/SLASupportTree.cpp:2156
msgid "Classification"
msgstr "分類"
#: src/libslic3r/SLA/SLASupportTree.cpp:2157
msgid "Routing to ground"
msgstr "路由到地面"
#: src/libslic3r/SLA/SLASupportTree.cpp:2158
msgid "Routing supports to model surface"
msgstr "模型曲面的路由支持"
#: src/libslic3r/SLA/SLASupportTree.cpp:2159
msgid "Cascading pillars"
msgstr "級聯柱"
#: src/libslic3r/SLA/SLASupportTree.cpp:2160
msgid "Processing small holes"
msgstr "加工小孔"
#: src/libslic3r/SLA/SLASupportTree.cpp:2161
msgid "Done"
msgstr "完成"
#: src/libslic3r/SLA/SLASupportTree.cpp:2162
msgid "Abort"
msgstr "中止"
#: src/libslic3r/Print.cpp:1136
msgid "All objects are outside of the print volume."
msgstr "所有對象都在列印範圍之外。"
#: src/libslic3r/Print.cpp:1165
msgid "Some objects are too close; your extruder will collide with them."
msgstr "有些物體太過靠近; 你的擠出頭有機會和他們相撞。"
#: src/libslic3r/Print.cpp:1180
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr "有些物體太高, 無法在擠出頭不衝突的情況下列印。"
#: src/libslic3r/Print.cpp:1190
msgid "The Spiral Vase option can only be used when printing a single object."
msgstr "只有在列印單個對象時, 才能使用 \"螺旋花瓶\" 選項。"
#: src/libslic3r/Print.cpp:1192
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr "\"螺旋花瓶\" 選項只能在列印單個材料對象時使用。"
#: src/libslic3r/Print.cpp:1198
msgid ""
"All extruders must have the same diameter for single extruder multimaterial "
"printer."
msgstr "對於單擠出機多材料印表機, 所有擠出機的直徑必須相同。"
#: src/libslic3r/Print.cpp:1203
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
"and Repetier G-code flavors."
msgstr "擦料塔目前只支持 Marlin, RepRap/Sprinter 和 Repetier G-code 類型。"
#: src/libslic3r/Print.cpp:1205
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr "擦料塔目前僅支持相對擠出機尋址 (use_relative_e_distances=1)。"
#: src/libslic3r/Print.cpp:1226
msgid ""
"The Wipe Tower is only supported for multiple objects if they have equal "
"layer heigths"
msgstr "只有在多個物體具有相等的層高的情況下, 才支持擦料塔"
#: src/libslic3r/Print.cpp:1228
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr "只有在相同數量的基座層上列印的對象時, 才支持擦料塔"
#: src/libslic3r/Print.cpp:1230
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""
"只有在使用相同的support_material_contact_distance（支撐材料距離）列印多個對象"
"時, 才支持擦料塔"
#: src/libslic3r/Print.cpp:1232
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr "只有在多個對象被平均切割的情況下, 才支持擦料塔。"
#: src/libslic3r/Print.cpp:1261
msgid ""
"The Wipe tower is only supported if all objects have the same layer height "
"profile"
msgstr "只有當所有對象具有相同的層高度配置文件時, 才支持擦料塔"
#: src/libslic3r/Print.cpp:1271
msgid "The supplied settings will cause an empty print."
msgstr "當前提供的設置將導致空列印。"
#: src/libslic3r/Print.cpp:1288
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr "爲一個或多個對象分配了印表機不存在的擠出機。"
#: src/libslic3r/Print.cpp:1297
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""
"使用不同噴嘴直徑的多個擠出機進行列印。如果要使用當前擠出機"
"(support_material_extruder == 0 或 support_material_interface_extruder == 0)"
"列印支撐物, 則所有噴嘴的直徑必須相同。"
#: src/libslic3r/Print.cpp:1305
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr "要使擦料塔與可溶性支撐配合使用, 支持層需要與對象圖層同步。"
#: src/libslic3r/Print.cpp:1309
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""
"只有在不觸發工具更改的情況下, 使用當前擠出機列印的未溶性支撐塔目前才支持不溶"
"於的支架。(support_material_extruder 和support_material_interface_extruder "
"都需要設置爲 0)。"
#: src/libslic3r/Print.cpp:1316
msgid "first_layer_height"
msgstr "first_layer_height"
#: src/libslic3r/Print.cpp:1331
msgid "First layer height can't be greater than nozzle diameter"
msgstr "第一層高度不能大於噴嘴直徑"
#: src/libslic3r/Print.cpp:1335
msgid "Layer height can't be greater than nozzle diameter"
msgstr "層高度不能大於噴嘴直徑"
#: src/libslic3r/SLAPrint.cpp:55
msgid "Slicing model"
msgstr "切片模型"
#: src/libslic3r/SLAPrint.cpp:56 src/libslic3r/SLAPrint.cpp:801
msgid "Generating support points"
msgstr "生成支持點"
#: src/libslic3r/SLAPrint.cpp:57
msgid "Generating support tree"
msgstr "生成支持樹"
#: src/libslic3r/SLAPrint.cpp:58
msgid "Generating pad"
msgstr "生成板"
#: src/libslic3r/SLAPrint.cpp:59
msgid "Slicing supports"
msgstr "切片支持"
#: src/libslic3r/SLAPrint.cpp:71
msgid "Merging slices and calculating statistics"
msgstr "合併切片和計算統計信息"
#: src/libslic3r/SLAPrint.cpp:72
msgid "Rasterizing layers"
msgstr "柵格化圖層"
#: src/libslic3r/SLAPrint.cpp:605
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr "沒有支持點就無法繼續!添加支持點或禁用支持生成。"
#: src/libslic3r/SLAPrint.cpp:617
msgid "Elevation is too low for object."
msgstr "對於對象來說, 高程太低。"
#: src/libslic3r/SLAPrint.cpp:699
msgid "Slicing had to be stopped due to an internal error."
msgstr "由於內部錯誤, 必須停止切片。"
#: src/libslic3r/SLAPrint.cpp:849 src/libslic3r/SLAPrint.cpp:859
#: src/libslic3r/SLAPrint.cpp:907
msgid "Visualizing supports"
msgstr "可視化支持"
#: src/libslic3r/SLAPrint.cpp:1449
msgid "Slicing done"
msgstr "切片完成"
#: src/libslic3r/PrintBase.cpp:65
msgid "Failed processing of the output_filename_format template."
msgstr "處理 output_filename_format 模板失敗。"
#: src/libslic3r/PrintConfig.cpp:42 src/libslic3r/PrintConfig.cpp:43
msgid "Printer technology"
msgstr "印表機技術"
#: src/libslic3r/PrintConfig.cpp:50
msgid "Bed shape"
msgstr "機牀形狀"
#: src/libslic3r/PrintConfig.cpp:57
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""
"該參數控制切片的高度（因此也控制總層數）。較薄的切片可以使精度更高，但花費的"
"列印時間也更長。"
#: src/libslic3r/PrintConfig.cpp:64
msgid "Max print height"
msgstr "最大列印高度"
#: src/libslic3r/PrintConfig.cpp:65
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr "將其設置爲您的擠出機在列印時可以達到的最大高度。"
#: src/libslic3r/PrintConfig.cpp:71
msgid "Slice gap closing radius"
msgstr "切片間隙閉合半徑"
#: src/libslic3r/PrintConfig.cpp:73
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"在三角形網格切片過程中, 小於2倍間隙閉合半徑的裂紋將會被填充。間隙閉合操作可能"
"會降低最終列印分辨率, 因此最好將該值保持在合理的較低水平。"
#: src/libslic3r/PrintConfig.cpp:81
msgid "Hostname, IP or URL"
msgstr "主機名, IP 或 URL"
#: src/libslic3r/PrintConfig.cpp:82
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."
msgstr ""
"Slic3r 可以將 G-code 文件上載到印表機主機。此字段應包含印表機主機實例的主機"
"名, IP 地址或 URL。"
#: src/libslic3r/PrintConfig.cpp:88
msgid "API Key / Password"
msgstr "API 密鑰/密碼"
#: src/libslic3r/PrintConfig.cpp:89
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
"Slic3r 可以將 G-code 文件上載到印表機主機。此字段應包含 API 密鑰或身份驗證所"
"需的密碼。"
#: src/libslic3r/PrintConfig.cpp:111
msgid "Avoid crossing perimeters"
msgstr "避免跨越輪廓"
#: src/libslic3r/PrintConfig.cpp:112
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"爲了儘量減少跨越輪廓，優化空程的移動方式。這非常適用於受滲漏問題影響的鮑登擠"
"出頭。此功能會減慢列印速度和 G 代碼生成速度。"
#: src/libslic3r/PrintConfig.cpp:119 src/libslic3r/PrintConfig.cpp:1976
msgid "Other layers"
msgstr "其它層"
#: src/libslic3r/PrintConfig.cpp:120
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr "第一個圖層後的層的牀溫。將此設置爲零, 以禁用輸出中的牀溫控制命令。"
#: src/libslic3r/PrintConfig.cpp:122
msgid "Bed temperature"
msgstr "機牀溫度"
#: src/libslic3r/PrintConfig.cpp:129
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""
"這段自定義代碼在層改變，即Z軸移動前插入。注意除了可以使用[layer_num]和"
"[layer_z]，也可以使用佔位符變量替代所有的slic3r設置。"
#: src/libslic3r/PrintConfig.cpp:139
msgid "Between objects G-code"
msgstr "對象之間的 G-code"
#: src/libslic3r/PrintConfig.cpp:140
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want."
msgstr ""
"使用順序列印時, 此代碼將插入對象之間。默認情況下, 使用非等待命令重置擠出機和"
"牀溫;但是, 如果在此自定義代碼中檢測到 m104、m109、m140 或 m190, Slic3r 將不會"
"添加溫度命令。請注意, 您可以對所有 Slic3r 設置使用佔位符變量, 因此您可以將 "
"\"M109 S[first_layer_temperature]\" 命令放在任何需要的地方。"
#: src/libslic3r/PrintConfig.cpp:150
msgid "Number of solid layers to generate on bottom surfaces."
msgstr "底部表面生成的可靠層數。"
#: src/libslic3r/PrintConfig.cpp:151
msgid "Bottom solid layers"
msgstr "底部可靠層"
#: src/libslic3r/PrintConfig.cpp:156
msgid "Bridge"
msgstr "橋"
#: src/libslic3r/PrintConfig.cpp:157
msgid ""
"This is the acceleration your printer will use for bridges. Set zero to "
"disable acceleration control for bridges."
msgstr "此項爲印表機在列印橋時的加速度。設爲0可以禁用列印橋的加速度控制。"
#: src/libslic3r/PrintConfig.cpp:159 src/libslic3r/PrintConfig.cpp:302
#: src/libslic3r/PrintConfig.cpp:814 src/libslic3r/PrintConfig.cpp:935
#: src/libslic3r/PrintConfig.cpp:1088 src/libslic3r/PrintConfig.cpp:1133
#: src/libslic3r/PrintConfig.cpp:1144 src/libslic3r/PrintConfig.cpp:1333
msgid "mm/s²"
msgstr "mm/s²"
#: src/libslic3r/PrintConfig.cpp:165
msgid "Bridging angle"
msgstr "橋接角度"
#: src/libslic3r/PrintConfig.cpp:167
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""
"橋接角度覆蓋。如果保持爲零, 則將自動計算橋接角度。否則, 所提供的角度將用於所"
"有橋樑。使用180°實現零角度。"
#: src/libslic3r/PrintConfig.cpp:170 src/libslic3r/PrintConfig.cpp:732
#: src/libslic3r/PrintConfig.cpp:1569 src/libslic3r/PrintConfig.cpp:1579
#: src/libslic3r/PrintConfig.cpp:1807 src/libslic3r/PrintConfig.cpp:1961
#: src/libslic3r/PrintConfig.cpp:2459
msgid "°"
msgstr "°"
#: src/libslic3r/PrintConfig.cpp:176
msgid "Bridges fan speed"
msgstr "橋風扇速度"
#: src/libslic3r/PrintConfig.cpp:177
msgid "This fan speed is enforced during all bridges and overhangs."
msgstr "此項爲在列印所有橋和懸垂部位時的風扇速度。"
#: src/libslic3r/PrintConfig.cpp:178 src/libslic3r/PrintConfig.cpp:744
#: src/libslic3r/PrintConfig.cpp:1153 src/libslic3r/PrintConfig.cpp:1216
#: src/libslic3r/PrintConfig.cpp:1461 src/libslic3r/PrintConfig.cpp:2258
#: src/libslic3r/PrintConfig.cpp:2498
msgid "%"
msgstr "%"
#: src/libslic3r/PrintConfig.cpp:185
msgid "Bridge flow ratio"
msgstr "橋流量比"
#: src/libslic3r/PrintConfig.cpp:187
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""
"此因素影響橋接部位的塑料用量。可以略微減少該值以回撤擠出物避免滴垂。但默認設"
"置通常來說已經可以滿足使用，在修改前需通過冷卻（使用風扇）進行測試。"
#: src/libslic3r/PrintConfig.cpp:197
msgid "Bridges"
msgstr "橋接處"
#: src/libslic3r/PrintConfig.cpp:199
msgid "Speed for printing bridges."
msgstr "列印橋接處的速度。"
#: src/libslic3r/PrintConfig.cpp:200 src/libslic3r/PrintConfig.cpp:576
#: src/libslic3r/PrintConfig.cpp:584 src/libslic3r/PrintConfig.cpp:593
#: src/libslic3r/PrintConfig.cpp:601 src/libslic3r/PrintConfig.cpp:628
#: src/libslic3r/PrintConfig.cpp:647 src/libslic3r/PrintConfig.cpp:873
#: src/libslic3r/PrintConfig.cpp:1000 src/libslic3r/PrintConfig.cpp:1078
#: src/libslic3r/PrintConfig.cpp:1098 src/libslic3r/PrintConfig.cpp:1111
#: src/libslic3r/PrintConfig.cpp:1122 src/libslic3r/PrintConfig.cpp:1175
#: src/libslic3r/PrintConfig.cpp:1234 src/libslic3r/PrintConfig.cpp:1362
#: src/libslic3r/PrintConfig.cpp:1536 src/libslic3r/PrintConfig.cpp:1545
#: src/libslic3r/PrintConfig.cpp:1940 src/libslic3r/PrintConfig.cpp:2051
msgid "mm/s"
msgstr "mm/s"
#: src/libslic3r/PrintConfig.cpp:207
msgid "Brim width"
msgstr "裙邊寬度"
#: src/libslic3r/PrintConfig.cpp:208
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr "第一層每個物體周圍列印的裙邊水平寬度。"
#: src/libslic3r/PrintConfig.cpp:215
msgid "Clip multi-part objects"
msgstr "剪切多部分對象"
#: src/libslic3r/PrintConfig.cpp:216
msgid ""
"When printing multi-material objects, this settings will make slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""
"列印多材料對象時, 此設置將使 slic3r 將一個接一個地剪裁重疊對象部分 (第二部分"
"將被第1部分裁剪, 第3部分將被第1和第2部分裁剪)。"
#: src/libslic3r/PrintConfig.cpp:223
msgid "Colorprint height"
msgstr "彩色列印高度"
#: src/libslic3r/PrintConfig.cpp:224
msgid "Heights at which a filament change is to occur. "
msgstr "將發生耗材絲變化的高度. "
#: src/libslic3r/PrintConfig.cpp:234
msgid "Compatible printers condition"
msgstr "兼容的印表機條件"
#: src/libslic3r/PrintConfig.cpp:235
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"使用中的印表機配置文件的配置值的布爾表達式。如果此表達式的計算結果爲 true, 則"
"此配置文件被視爲與活動印表機配置文件兼容。"
#: src/libslic3r/PrintConfig.cpp:249
msgid "Compatible print profiles condition"
msgstr "兼容的列印配置文件條件"
#: src/libslic3r/PrintConfig.cpp:250
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"使用中的列印配置文件的配置值的布爾表達式。如果此表達式的計算結果爲 true, 則此"
"配置文件被視爲與活動列印配置文件兼容。"
#: src/libslic3r/PrintConfig.cpp:267
msgid "Complete individual objects"
msgstr "列印完成單個物體"
#: src/libslic3r/PrintConfig.cpp:268
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""
"勾選此項表示當列印多個物體或複製體時，先列印完一整個物體再繼續列印後續物體"
"（從底層開始）。此選項利於避免打毀掉物體。Slic3r應該給出警示，避免擠出頭碰"
"撞，但請小心。"
#: src/libslic3r/PrintConfig.cpp:276
msgid "Enable auto cooling"
msgstr "自動冷卻使能"
#: src/libslic3r/PrintConfig.cpp:277
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr "該選項啓動自動冷卻，使得可根據層列印時間調整列印速度和風扇速度。"
#: src/libslic3r/PrintConfig.cpp:282
msgid "Cooling tube position"
msgstr "冷卻管位置"
#: src/libslic3r/PrintConfig.cpp:283
msgid "Distance of the center-point of the cooling tube from the extruder tip "
msgstr "冷卻管中心點與擠出機尖端的距離 "
#: src/libslic3r/PrintConfig.cpp:290
msgid "Cooling tube length"
msgstr "冷卻管長度"
#: src/libslic3r/PrintConfig.cpp:291
msgid "Length of the cooling tube to limit space for cooling moves inside it "
msgstr "冷卻管的長度, 以限制冷卻內的移動空間 "
#: src/libslic3r/PrintConfig.cpp:299
msgid ""
"This is the acceleration your printer will be reset to after the role-"
"specific acceleration values are used (perimeter/infill). Set zero to "
"prevent resetting acceleration at all."
msgstr ""
"該值爲印表機在使用了特定的加速度值（如輪廓/填充）後將重置的加速度值。設爲0以"
"防止重置加速度。"
#: src/libslic3r/PrintConfig.cpp:308
msgid "Default filament profile"
msgstr "默認耗材絲配置"
#: src/libslic3r/PrintConfig.cpp:309
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""
"與當前印表機配置文件關聯的默認耗材絲配置文件。在選擇當前印表機配置文件時, 將"
"激活此耗材絲絲配置文件。"
#: src/libslic3r/PrintConfig.cpp:315
msgid "Default print profile"
msgstr "默認 SLA 列印配置文件"
#: src/libslic3r/PrintConfig.cpp:316 src/libslic3r/PrintConfig.cpp:2337
#: src/libslic3r/PrintConfig.cpp:2348
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""
"與當前印表機配置文件關聯的默認列印配置文件。在選擇當前印表機配置文件時, 將激"
"活此列印配置文件。"
#: src/libslic3r/PrintConfig.cpp:322
msgid "Disable fan for the first"
msgstr "前幾層禁用風扇"
#: src/libslic3r/PrintConfig.cpp:323
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""
"您可以將其設置爲正值, 以便在第一層期間完全禁用風扇, 這樣就不會使粘附變得更"
"糟。"
#: src/libslic3r/PrintConfig.cpp:325 src/libslic3r/PrintConfig.cpp:945
#: src/libslic3r/PrintConfig.cpp:1434 src/libslic3r/PrintConfig.cpp:1619
#: src/libslic3r/PrintConfig.cpp:1680 src/libslic3r/PrintConfig.cpp:1843
#: src/libslic3r/PrintConfig.cpp:1888
msgid "layers"
msgstr "層"
#: src/libslic3r/PrintConfig.cpp:332
msgid "Don't support bridges"
msgstr "不支持橋接"
#: src/libslic3r/PrintConfig.cpp:334
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr "試驗項，在橋接處禁止生成支撐材料。"
#: src/libslic3r/PrintConfig.cpp:340
msgid "Distance between copies"
msgstr "複製物體之間的距離"
#: src/libslic3r/PrintConfig.cpp:341
msgid "Distance used for the auto-arrange feature of the plater."
msgstr "自動分佈時所使用的距離。"
#: src/libslic3r/PrintConfig.cpp:348
msgid "Elephant foot compensation"
msgstr "大象腳補償"
#: src/libslic3r/PrintConfig.cpp:350
msgid ""
"The first layer will be shrunk in the XY plane by the configured value to "
"compensate for the 1st layer squish aka an Elephant Foot effect."
msgstr ""
"第一層將被相對於配置的值在 XY 平面上縮小, 以補償第一層斜視, 也就是大象腳的效"
"果。"
#: src/libslic3r/PrintConfig.cpp:359
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all Slic3r settings."
msgstr "該部分將插入到輸出文件的結尾。注意可對所有的Slic3r參數使用佔位符變量。"
#: src/libslic3r/PrintConfig.cpp:369
msgid ""
"This end procedure is inserted at the end of the output file, before the "
"printer end gcode. Note that you can use placeholder variables for all "
"Slic3r settings. If you have multiple extruders, the gcode is processed in "
"extruder order."
msgstr ""
"該部分將被插入輸出文件的結尾，但在印表機結尾G代碼之前。注意可以對所有Slic3r參"
"數使用佔位符變量代替。如果有多個列印頭，G代碼將按列印頭的順序來處理。"
#: src/libslic3r/PrintConfig.cpp:379
msgid "Ensure vertical shell thickness"
msgstr "確保垂直外殼厚度"
#: src/libslic3r/PrintConfig.cpp:381
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr "在傾斜表面附近添加實心填充, 以保證垂直外殼厚度 (頂部 + 底部實心層)。"
#: src/libslic3r/PrintConfig.cpp:387
msgid "Top fill pattern"
msgstr "頂部填充圖案"
#: src/libslic3r/PrintConfig.cpp:389
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr "填充模式的頂部填充。這隻影響頂部可見層, 而不影響其相鄰的實體外殼。"
#: src/libslic3r/PrintConfig.cpp:397 src/libslic3r/PrintConfig.cpp:795
#: src/libslic3r/PrintConfig.cpp:1921
msgid "Rectilinear"
msgstr "折線式"
#: src/libslic3r/PrintConfig.cpp:398 src/libslic3r/PrintConfig.cpp:801
msgid "Concentric"
msgstr "同軸式"
#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:805
msgid "Hilbert Curve"
msgstr "希爾伯特曲線式"
#: src/libslic3r/PrintConfig.cpp:400 src/libslic3r/PrintConfig.cpp:806
msgid "Archimedean Chords"
msgstr "阿基米德和鉉式"
# Not so sure about how to put "Octagram Spiral" in Chinese. Or maybe "Octagram螺旋“ is good.
#: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:807
msgid "Octagram Spiral"
msgstr "八角星螺旋式"
#: src/libslic3r/PrintConfig.cpp:408
msgid "Bottom fill pattern"
msgstr "底部填充圖案"
#: src/libslic3r/PrintConfig.cpp:409
msgid ""
"Fill pattern for bottom infill. This only affects the bottom external "
"visible layer, and not its adjacent solid shells."
msgstr "底部填充填充模式。這隻影響底部的外部可見層, 而不影響其相鄰的實體外殼。"
#: src/libslic3r/PrintConfig.cpp:414 src/libslic3r/PrintConfig.cpp:424
msgid "External perimeters"
msgstr "外圍輪廓"
#: src/libslic3r/PrintConfig.cpp:416
msgid ""
"Set this to a non-zero value to set a manual extrusion width for external "
"perimeters. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 200%), it will be computed over layer height."
msgstr ""
"將其設置爲非零值, 以設置外部周長的手動擠出寬度。如果爲零, 將使用默認擠出寬"
"度, 如果沒有設置默認值將使用 1.125 x 噴嘴直徑。如果以百分比表示 (例如 200%), "
"則將根據圖層高度計算。"
#: src/libslic3r/PrintConfig.cpp:419 src/libslic3r/PrintConfig.cpp:834
#: src/libslic3r/PrintConfig.cpp:966 src/libslic3r/PrintConfig.cpp:1353
#: src/libslic3r/PrintConfig.cpp:1691 src/libslic3r/PrintConfig.cpp:1864
#: src/libslic3r/PrintConfig.cpp:2022
msgid "mm or % (leave 0 for default)"
msgstr "mm 或 % (0爲默認值)"
#: src/libslic3r/PrintConfig.cpp:426
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"此單獨設置將影響外圍輪廓 (可見的表面) 的速度。如果以百分比表示 (例如: 80%)它"
"將在上面的周界速度設置上計算。自動設置爲零。"
#: src/libslic3r/PrintConfig.cpp:429 src/libslic3r/PrintConfig.cpp:855
#: src/libslic3r/PrintConfig.cpp:1650 src/libslic3r/PrintConfig.cpp:1701
#: src/libslic3r/PrintConfig.cpp:1907 src/libslic3r/PrintConfig.cpp:2034
msgid "mm/s or %"
msgstr "mm/s 或 %"
#: src/libslic3r/PrintConfig.cpp:436
msgid "External perimeters first"
msgstr "先列印外圍輪廓"
#: src/libslic3r/PrintConfig.cpp:438
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr "從最外圍輪廓向最內部的輪廓列印，而不是反方向。"
#: src/libslic3r/PrintConfig.cpp:444
msgid "Extra perimeters if needed"
msgstr "如果需要的話，擴展外圍輪廓"
#: src/libslic3r/PrintConfig.cpp:446
#, no-c-format
msgid ""
"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
"keeps adding perimeters, until more than 70% of the loop immediately above "
"is supported."
msgstr ""
"在需要時添加更多外圍輪廓, 以避免傾斜牆中的縫隙。Slic3r不斷添加輪廓，直到支持"
"上面70％以上的循環。"
#: src/libslic3r/PrintConfig.cpp:456
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""
"要使用的擠出機 (除非指定了更具體的擠出機設置)。此值覆蓋外圍和填充擠出機, 但不"
"覆蓋支持擠出機。"
#: src/libslic3r/PrintConfig.cpp:468
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""
"設置爲噴嘴尖端和（通常）X架杆之間的垂直距離。換句話說，這是在你的擠出機周圍的"
"空隙氣缸的高度，它代表了擠出頭在與其他印列印物體碰撞前科達到的最大深度。"
#: src/libslic3r/PrintConfig.cpp:478
msgid "Radius"
msgstr "半徑"
#: src/libslic3r/PrintConfig.cpp:479
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""
"設置爲擠出頭周圍的空隙半徑。如果擠出頭未置中，安全起見請選擇最大值。該參數用"
"於檢查碰撞，並在界面中顯示圖形預覽。"
#: src/libslic3r/PrintConfig.cpp:489
msgid "Extruder Color"
msgstr "擠出頭顏色"
#: src/libslic3r/PrintConfig.cpp:490 src/libslic3r/PrintConfig.cpp:550
msgid "This is only used in the Slic3r interface as a visual help."
msgstr "僅提供Slic3r界面的視覺幫助。"
#: src/libslic3r/PrintConfig.cpp:496
msgid "Extruder offset"
msgstr "擠出頭偏置"
#: src/libslic3r/PrintConfig.cpp:497
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""
"如果你的固件不能處理擠出頭的位移量，需要使用G代碼將其考慮進去。該選項可讓你細"
"化每個擠出頭相對第一個擠出頭的位移量。一般爲正座標（它們將從XY座標相減得"
"到）。"
#: src/libslic3r/PrintConfig.cpp:506
msgid "Extrusion axis"
msgstr "擠出軸"
#: src/libslic3r/PrintConfig.cpp:507
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""
"使用該項設置你的印表機擠出頭的軸所用字母（一般爲E，但有的印表機使用A)。"
#: src/libslic3r/PrintConfig.cpp:512
msgid "Extrusion multiplier"
msgstr "擠出倍數"
#: src/libslic3r/PrintConfig.cpp:513
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""
"該選項按比例改變流量。你可能需要調整該設置來獲取更好的表面尾處理，更正單層牆"
"的寬度。通常值範圍在0.9到1.1之間。如果你覺得有必要更改幅度更大，檢查絲料直徑"
"和你的固件E步驟。"
#: src/libslic3r/PrintConfig.cpp:521
msgid "Default extrusion width"
msgstr "默認擠出寬度"
#: src/libslic3r/PrintConfig.cpp:523
msgid ""
"Set this to a non-zero value to allow a manual extrusion width. If left to "
"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
"tooltips for perimeter extrusion width, infill extrusion width etc). If "
"expressed as percentage (for example: 230%), it will be computed over layer "
"height."
msgstr ""
"將其設置爲非零值, 以允許手動擠出寬度。如果保持爲零, Slic3r 將從噴嘴直徑中提取"
"擠出寬度 (請參閱周邊擠出寬度、填充擠出寬度等工具提示)。如果以百分比表示 (例"
"如: 230%), 則將根據圖層高度計算。"
#: src/libslic3r/PrintConfig.cpp:527
msgid "mm or % (leave 0 for auto)"
msgstr "mm/s 或 % （0 爲自動)"
#: src/libslic3r/PrintConfig.cpp:532
msgid "Keep fan always on"
msgstr "保持風扇總是打開"
#: src/libslic3r/PrintConfig.cpp:533
msgid ""
"If this is enabled, fan will never be disabled and will be kept running at "
"least at its minimum speed. Useful for PLA, harmful for ABS."
msgstr ""
"勾選此項，風扇將不會被關閉，在整個列印過程中將持續以不低於最低速開啓。對於PLA"
"材料有用，對ABS材料不適用。"
#: src/libslic3r/PrintConfig.cpp:538
msgid "Enable fan if layer print time is below"
msgstr "如果列印時間低於該值，則氣動風扇"
#: src/libslic3r/PrintConfig.cpp:539
msgid ""
"If layer print time is estimated below this number of seconds, fan will be "
"enabled and its speed will be calculated by interpolating the minimum and "
"maximum speeds."
msgstr ""
"如果估算的列印時間低於該數值（單位爲秒），風扇將啓用，而且速度值根據插補最小"
"速度值和最大速度值來計算。"
#: src/libslic3r/PrintConfig.cpp:541 src/libslic3r/PrintConfig.cpp:1637
msgid "approximate seconds"
msgstr "秒（大約）"
#: src/libslic3r/PrintConfig.cpp:549
msgid "Color"
msgstr "顏色"
#: src/libslic3r/PrintConfig.cpp:555
msgid "Filament notes"
msgstr "絲料備註"
#: src/libslic3r/PrintConfig.cpp:556
msgid "You can put your notes regarding the filament here."
msgstr "關於材料的備註可放這裏。"
#: src/libslic3r/PrintConfig.cpp:564 src/libslic3r/PrintConfig.cpp:1181
msgid "Max volumetric speed"
msgstr "最大體積速度"
#: src/libslic3r/PrintConfig.cpp:565
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""
"該材料所允許的最大體積速度。把最大體積速度限定爲列印速度和材料體積速度的最小"
"值。設爲0則無限制。"
#: src/libslic3r/PrintConfig.cpp:568 src/libslic3r/PrintConfig.cpp:1184
msgid "mm³/s"
msgstr "mm³/s"
#: src/libslic3r/PrintConfig.cpp:574
msgid "Loading speed"
msgstr "加載速度"
#: src/libslic3r/PrintConfig.cpp:575
msgid "Speed used for loading the filament on the wipe tower. "
msgstr "用於在擦拭塔上加載耗材絲的速度. "
#: src/libslic3r/PrintConfig.cpp:582
msgid "Loading speed at the start"
msgstr "啓動時的加載速度"
#: src/libslic3r/PrintConfig.cpp:583
msgid "Speed used at the very beginning of loading phase. "
msgstr "加載階段開始時使用的速度. "
#: src/libslic3r/PrintConfig.cpp:590
msgid "Unloading speed"
msgstr "卸載速度"
#: src/libslic3r/PrintConfig.cpp:591
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect "
"initial part of unloading just after ramming). "
msgstr "用於擦料塔上耗材絲的速度 (不影響撞擊後卸載的初始部分). "
#: src/libslic3r/PrintConfig.cpp:599
msgid "Unloading speed at the start"
msgstr "啓動時卸載速度"
#: src/libslic3r/PrintConfig.cpp:600
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming. "
msgstr "用於在撞擊後立即卸載細絲尖端的速度. "
#: src/libslic3r/PrintConfig.cpp:607
msgid "Delay after unloading"
msgstr "卸載後的延遲"
#: src/libslic3r/PrintConfig.cpp:608
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions. "
msgstr ""
"耗材絲卸掉後的等待時間。有助於使用柔性材料時的工具切換, 這些材料可能需要更多"
"的時間來縮小到原始尺寸. "
#: src/libslic3r/PrintConfig.cpp:617
msgid "Number of cooling moves"
msgstr "冷卻移動次數"
#: src/libslic3r/PrintConfig.cpp:618
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves "
msgstr "耗材絲是通過在冷卻管中來回移動來冷卻的。指定這些移動的所需數量 "
#: src/libslic3r/PrintConfig.cpp:626
msgid "Speed of the first cooling move"
msgstr "第一次冷卻運動的速度"
#: src/libslic3r/PrintConfig.cpp:627
msgid "Cooling moves are gradually accelerating beginning at this speed. "
msgstr "冷卻動作正以這樣的速度逐漸開始加速. "
#: src/libslic3r/PrintConfig.cpp:634
msgid "Minimal purge on wipe tower"
msgstr "擦拭塔上的最小清理量"
#: src/libslic3r/PrintConfig.cpp:635
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""
"換料後, 新加載的耗材絲在噴嘴內的確切位置可能尚不清楚, 而且耗材絲壓力可能尚不"
"穩定。在將列印頭清洗成填充物或填充對象之前, Slic3r 將始終將這些數量的材料放入"
"擦拭塔中, 以可靠地產生連續的填充物或填充對象。"
#: src/libslic3r/PrintConfig.cpp:639
msgid "mm³"
msgstr "mm³"
#: src/libslic3r/PrintConfig.cpp:645
msgid "Speed of the last cooling move"
msgstr "最後一次冷卻移動的速度"
#: src/libslic3r/PrintConfig.cpp:646
msgid "Cooling moves are gradually accelerating towards this speed. "
msgstr "冷卻動作會逐漸加速到這個速度. "
#: src/libslic3r/PrintConfig.cpp:653
msgid "Filament load time"
msgstr "耗材絲加載時間"
#: src/libslic3r/PrintConfig.cpp:654
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"印表機固件 (或Multi Material Unit 2.0) 在工具更換期間 (執行 T 代碼時) 加載新"
"耗材絲的時間。 G-code時間估計器將此時間添加到總列印時間中。"
#: src/libslic3r/PrintConfig.cpp:661
msgid "Ramming parameters"
msgstr "衝壓參數"
#: src/libslic3r/PrintConfig.cpp:662
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters "
msgstr "此字符串由 RammingDialog 編輯, 幷包含衝壓特定參數 "
#: src/libslic3r/PrintConfig.cpp:668
msgid "Filament unload time"
msgstr "耗材絲卸載時間"
#: src/libslic3r/PrintConfig.cpp:669
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"印表機固件 (或Multi Material Unit 2.0) 在工具更換期間 (執行 T 代碼時) 卸載耗"
"材絲的時間。 G-code時間估計器將此時間添加到總列印時間中。"
#: src/libslic3r/PrintConfig.cpp:677
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""
"在這裏輸入你的材料直徑。需要較高精度，所以請使用卡尺，沿着材料長絲做多次測"
"量，計算平均值。"
#: src/libslic3r/PrintConfig.cpp:684
msgid "Density"
msgstr "密度"
#: src/libslic3r/PrintConfig.cpp:685
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""
"在這裏輸入你的絲料密度。此僅爲統計信息。一個不錯的方法是測量一段已知長度絲料"
"的重量，然後計算體積。更好的方法式直接通過位移計算體積。"
#: src/libslic3r/PrintConfig.cpp:688
msgid "g/cm³"
msgstr "g/cm³"
#: src/libslic3r/PrintConfig.cpp:693
msgid "Filament type"
msgstr "耗材類型"
#: src/libslic3r/PrintConfig.cpp:694
msgid "The filament material type for use in custom G-codes."
msgstr "用於自定義 G-codes的耗材絲材料類型。"
#: src/libslic3r/PrintConfig.cpp:710
msgid "Soluble material"
msgstr "可溶性材料"
#: src/libslic3r/PrintConfig.cpp:711
msgid "Soluble material is most likely used for a soluble support."
msgstr "可溶性材料最可能用於可溶性支撐。"
#: src/libslic3r/PrintConfig.cpp:717
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr "在這裏輸入絲料每公斤的價格。僅用於統計信息。"
# Set this to be the local currency symbol.
#: src/libslic3r/PrintConfig.cpp:718
msgid "money/kg"
msgstr "¥/kg"
#: src/libslic3r/PrintConfig.cpp:727
msgid "Fill angle"
msgstr "填充角度"
#: src/libslic3r/PrintConfig.cpp:729
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""
"填充的默認基礎方向角。交叉引線適用於此。橋接處將使用Slic3r所偵測的最好方向來"
"填充，所以此參數不影響它們。"
#: src/libslic3r/PrintConfig.cpp:741
msgid "Fill density"
msgstr "填充密度"
#: src/libslic3r/PrintConfig.cpp:743
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr "內部填充的密度，以0% - 100% 表示。"
#: src/libslic3r/PrintConfig.cpp:778
msgid "Fill pattern"
msgstr "填充樣式"
#: src/libslic3r/PrintConfig.cpp:780
msgid "Fill pattern for general low-density infill."
msgstr "一般低密度填充的填充樣式。"
#: src/libslic3r/PrintConfig.cpp:796
msgid "Grid"
msgstr "網格"
#: src/libslic3r/PrintConfig.cpp:797
msgid "Triangles"
msgstr "三角形"
#: src/libslic3r/PrintConfig.cpp:798
msgid "Stars"
msgstr "星級"
#: src/libslic3r/PrintConfig.cpp:799
msgid "Cubic"
msgstr "立方體"
#: src/libslic3r/PrintConfig.cpp:800
msgid "Line"
msgstr "線"
#: src/libslic3r/PrintConfig.cpp:802 src/libslic3r/PrintConfig.cpp:1923
msgid "Honeycomb"
msgstr "蜂窩"
#: src/libslic3r/PrintConfig.cpp:803
msgid "3D Honeycomb"
msgstr "3D 蜂窩"
#: src/libslic3r/PrintConfig.cpp:804
msgid "Gyroid"
msgstr "螺旋形"
#: src/libslic3r/PrintConfig.cpp:811 src/libslic3r/PrintConfig.cpp:820
#: src/libslic3r/PrintConfig.cpp:828 src/libslic3r/PrintConfig.cpp:861
msgid "First layer"
msgstr "首層"
#: src/libslic3r/PrintConfig.cpp:812
msgid ""
"This is the acceleration your printer will use for first layer. Set zero to "
"disable acceleration control for first layer."
msgstr "此項爲印表機對首層使用的加速度。設爲0則對首層禁用加速控制。"
#: src/libslic3r/PrintConfig.cpp:821
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr "首層的加熱板溫度。設爲0，可在輸出中禁用機牀溫度控制指令。"
#: src/libslic3r/PrintConfig.cpp:830
msgid ""
"Set this to a non-zero value to set a manual extrusion width for first "
"layer. You can use this to force fatter extrudates for better adhesion. If "
"expressed as percentage (for example 120%) it will be computed over first "
"layer height. If set to zero, it will use the default extrusion width."
msgstr ""
"將其設置爲非零值, 以設置第一層的手動擠出寬度。您可以使用它強制擠出更多擠出物"
"以得到更好的附着力。如果以百分比表示 (例如 120%), 則將在第一層高度上計算。如"
"果設置爲零, 它將使用默認的擠出寬度。"
#: src/libslic3r/PrintConfig.cpp:840
msgid "First layer height"
msgstr "首層高度"
#: src/libslic3r/PrintConfig.cpp:842
msgid ""
"When printing with very low layer heights, you might still want to print a "
"thicker bottom layer to improve adhesion and tolerance for non perfect build "
"plates. This can be expressed as an absolute value or as a percentage (for "
"example: 150%) over the default layer height."
msgstr ""
"當以非常低的層高列印時，對於不太理想的熱牀來說可能需要列印較厚的底層來提高粘"
"附效果。該值可被表示爲一個絕對值，或者一個相對於默認層高的百分數（如150%）。"
#: src/libslic3r/PrintConfig.cpp:846 src/libslic3r/PrintConfig.cpp:991
#: src/libslic3r/PrintConfig.cpp:1796
msgid "mm or %"
msgstr "mm 或 %"
#: src/libslic3r/PrintConfig.cpp:851
msgid "First layer speed"
msgstr "首層速度"
#: src/libslic3r/PrintConfig.cpp:852
msgid ""
"If expressed as absolute value in mm/s, this speed will be applied to all "
"the print moves of the first layer, regardless of their type. If expressed "
"as a percentage (for example: 40%) it will scale the default speeds."
msgstr ""
"如果表示爲mm/s的數值，該值將被用於首層的列印動作，無關動作的類型。如果表示爲"
"百分數（如40%），則以默認速度值爲基準。"
#: src/libslic3r/PrintConfig.cpp:862
msgid ""
"Extruder temperature for first layer. If you want to control temperature "
"manually during print, set this to zero to disable temperature control "
"commands in the output file."
msgstr ""
"首層擠出頭溫度。如果要在列印過程中手動控制溫度，將該項設爲0來禁止輸出文件中的"
"控制命令。"
#: src/libslic3r/PrintConfig.cpp:871
msgid ""
"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
"filling."
msgstr ""
"使用短鋸齒形移動來填補小縫隙的速度。保持合理的低值, 以避免過多的晃動和共振問"
"題。設置爲零, 以禁用間隙填充。"
#: src/libslic3r/PrintConfig.cpp:879
msgid "Verbose G-code"
msgstr "詳細的G代碼"
#: src/libslic3r/PrintConfig.cpp:880
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""
"啓動該項可獲得帶註釋的G代碼文件，每一行都有對應的解釋性文字。如果從SD卡列印，"
"文件冗餘部分可能減緩你的固件運行速度。"
#: src/libslic3r/PrintConfig.cpp:887
msgid "G-code flavor"
msgstr "G代碼風格"
#: src/libslic3r/PrintConfig.cpp:888
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
"extrusion value at all."
msgstr ""
"一些 G/M 代碼的指令，包括溫度控制和其他，但不通用。將此項設爲印表機的固件來獲"
"取兼容性的輸出。“無擠出”選項使得Slic3r不輸出任何擠出值。"
#: src/libslic3r/PrintConfig.cpp:911
msgid "No extrusion"
msgstr "無擠出"
#: src/libslic3r/PrintConfig.cpp:924
msgid "High extruder current on filament swap"
msgstr "耗材絲切換時的高擠出機電流"
#: src/libslic3r/PrintConfig.cpp:925
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""
"在耗材絲切換序列中增加擠出機電機電流可能是有益的, 這樣可以快速衝擊進料速度, "
"並在用不良形狀的尖端加載耗材絲時克服阻力。"
#: src/libslic3r/PrintConfig.cpp:933
msgid ""
"This is the acceleration your printer will use for infill. Set zero to "
"disable acceleration control for infill."
msgstr "印表機填充加速度。設爲0可禁用填充加速控制。"
#: src/libslic3r/PrintConfig.cpp:941
msgid "Combine infill every"
msgstr "每幾層聯合填充"
#: src/libslic3r/PrintConfig.cpp:943
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""
"該功能可通過擠出更厚的填充層來實現聯合填充，並加速列印，同時保留了薄壁，也就"
"保證了精度。"
#: src/libslic3r/PrintConfig.cpp:946
msgid "Combine infill every n layers"
msgstr "混合填充每 n 個層"
#: src/libslic3r/PrintConfig.cpp:952
msgid "Infill extruder"
msgstr "填充擠出頭"
#: src/libslic3r/PrintConfig.cpp:954
msgid "The extruder to use when printing infill."
msgstr "列印填充時使用的擠出頭。"
#: src/libslic3r/PrintConfig.cpp:962
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. You may want to use fatter extrudates to speed "
"up the infill and make your parts stronger. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"將其設置爲非零值, 以設置填充的手動擠出寬度。如果爲零, 則如果設置, 將使用默認"
"擠出寬度, 否則將使用 1.125 x 噴嘴直徑。你可能想使用更多的擠出物來加速填充, 使"
"你的部件更結實。如果以百分比表示 (例如 90%), 則將在圖層高度上計算。"
#: src/libslic3r/PrintConfig.cpp:971
msgid "Infill before perimeters"
msgstr "先填充後列印輪廓"
#: src/libslic3r/PrintConfig.cpp:972
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr "該選項將列印輪廓和填充的方式對調，使後者提前。"
#: src/libslic3r/PrintConfig.cpp:977
msgid "Only infill where needed"
msgstr "僅在需要時填充"
#: src/libslic3r/PrintConfig.cpp:979
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""
"該選項將把填充限定用於支撐天花板（將充當內部支撐材料的作用）。如果啓用，由於"
"多個包含的選項將使G代碼生成速度變慢。"
#: src/libslic3r/PrintConfig.cpp:986
msgid "Infill/perimeters overlap"
msgstr "填充/輪廓重疊"
#: src/libslic3r/PrintConfig.cpp:988
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""
"使得填充和輪廓間有額外的重疊部分，便於結合。理論上並不需要，但偏移可能會導致"
"間隙。如果表示爲百分數（如15%），則以輪廓擠出寬度爲基準。"
#: src/libslic3r/PrintConfig.cpp:999
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr "列印內部填充的速度。零爲自動設置。"
#: src/libslic3r/PrintConfig.cpp:1007
msgid "Inherits profile"
msgstr "繼承配置文件"
#: src/libslic3r/PrintConfig.cpp:1008
msgid "Name of the profile, from which this profile inherits."
msgstr "此配置文件從中繼承的配置文件的名稱。"
#: src/libslic3r/PrintConfig.cpp:1021
msgid "Interface shells"
msgstr "表面外殼"
#: src/libslic3r/PrintConfig.cpp:1022
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""
"在相鄰的材料/包圍體之間強制生成可靠外殼層。適用於使用半透明材料或手工可溶性支"
"撐材料的多擠出頭列印。"
#: src/libslic3r/PrintConfig.cpp:1031
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""
"這段G代碼在每一層變化後，即Z軸移動後，擠出頭移動到第一層的點之前插入。注意除"
"了使用如[layer_num]和[layer_z]，也可以使用佔位符變量來代替Slic3r的參數。"
#: src/libslic3r/PrintConfig.cpp:1042
msgid "Supports remaining times"
msgstr "支撐剩餘時間"
#: src/libslic3r/PrintConfig.cpp:1043
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""
"以1分鐘的間隔發出M73 P[percent printed] R[remaining time in minutes] 進入 G-"
"code , 讓固件顯示準確的剩餘時間。到目前爲止, 只有 Prusa i3 MK3 固件識別 M73。"
"此外, i3 MK3 固件支持 M73 Qxx Sxx 的靜音模式。"
#: src/libslic3r/PrintConfig.cpp:1051
msgid "Supports silent mode"
msgstr "支持靜默模式"
#: src/libslic3r/PrintConfig.cpp:1052
msgid "Set silent mode for the G-code flavor"
msgstr "爲 G-code 風格設置靜默模式"
#: src/libslic3r/PrintConfig.cpp:1075
msgid "Maximum feedrate %1%"
msgstr "最大進給率 %1%"
#: src/libslic3r/PrintConfig.cpp:1077
msgid "Maximum feedrate of the %1% axis"
msgstr "%1% 軸的最大進給率"
#: src/libslic3r/PrintConfig.cpp:1085
msgid "Maximum acceleration %1%"
msgstr "最大加速度 %1%"
#: src/libslic3r/PrintConfig.cpp:1087
msgid "Maximum acceleration of the %1% axis"
msgstr "%1% 軸的最大加速度"
#: src/libslic3r/PrintConfig.cpp:1095
msgid "Maximum jerk %1%"
msgstr "最大抖動 %1%"
#: src/libslic3r/PrintConfig.cpp:1097
msgid "Maximum jerk of the %1% axis"
msgstr "%1% 軸的最大抖動"
#: src/libslic3r/PrintConfig.cpp:1108 src/libslic3r/PrintConfig.cpp:1110
msgid "Minimum feedrate when extruding"
msgstr "擠出時的最小進給率"
#: src/libslic3r/PrintConfig.cpp:1119 src/libslic3r/PrintConfig.cpp:1121
msgid "Minimum travel feedrate"
msgstr "最小移動進給率"
#: src/libslic3r/PrintConfig.cpp:1130 src/libslic3r/PrintConfig.cpp:1132
msgid "Maximum acceleration when extruding"
msgstr "擠出時的最大加速度"
#: src/libslic3r/PrintConfig.cpp:1141 src/libslic3r/PrintConfig.cpp:1143
msgid "Maximum acceleration when retracting"
msgstr "回縮時的最大加速度"
#: src/libslic3r/PrintConfig.cpp:1151 src/libslic3r/PrintConfig.cpp:1160
msgid "Max"
msgstr "最大值"
#: src/libslic3r/PrintConfig.cpp:1152
msgid "This setting represents the maximum speed of your fan."
msgstr "該值表示風扇的最大速度。"
#: src/libslic3r/PrintConfig.cpp:1161
#, no-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""
"這是此擠出機的最高可列印層高度, 用於封頂可變圖層高度和支撐層高度。建議的最大"
"層高度爲擠出寬度的 75%, 以實現合理的層間粘附。如果設置爲 0, 圖層高度將限制爲"
"噴嘴直徑的75%。"
#: src/libslic3r/PrintConfig.cpp:1171
msgid "Max print speed"
msgstr "最大列印速度"
#: src/libslic3r/PrintConfig.cpp:1172
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""
"當將其他速度參數設爲0時，Slic3r會自動計算最優速度以保證擠出頭壓力穩定。該試驗"
"參數用於設置所允許的最大列印速度。"
#: src/libslic3r/PrintConfig.cpp:1182
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr "該實驗參數用於設置你的擠出頭所支持的最大體積速度。"
#: src/libslic3r/PrintConfig.cpp:1191
msgid "Max volumetric slope positive"
msgstr "最大流量增加率"
#: src/libslic3r/PrintConfig.cpp:1192 src/libslic3r/PrintConfig.cpp:1203
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""
"該實驗設置用於限制擠出速率的變化速度。1.8 mm/sm²的值確保從1.8 毫米/(0.45 mm "
"擠出寬度, 0.2 mm 擠出高度, 進給率 20 m) 到 5.4 mm/(進給率 60 m) 的擠出速率變"
"化至少需要2秒。"
#: src/libslic3r/PrintConfig.cpp:1196 src/libslic3r/PrintConfig.cpp:1207
msgid "mm³/s²"
msgstr "mm³/s²"
#: src/libslic3r/PrintConfig.cpp:1202
msgid "Max volumetric slope negative"
msgstr "最大流量減少率"
#: src/libslic3r/PrintConfig.cpp:1214 src/libslic3r/PrintConfig.cpp:1223
msgid "Min"
msgstr "最小值"
#: src/libslic3r/PrintConfig.cpp:1215
msgid "This setting represents the minimum PWM your fan needs to work."
msgstr "該參數表示你的風扇工作的最小PWM。"
#: src/libslic3r/PrintConfig.cpp:1224
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""
"這是此擠出機的最低可列印層高度, 並限制可變圖層高度的分辨率。典型值介於 0.05 "
"mm 和 0.1 mm 之間。"
#: src/libslic3r/PrintConfig.cpp:1232
msgid "Min print speed"
msgstr "最小列印速度"
#: src/libslic3r/PrintConfig.cpp:1233
msgid "Slic3r will not scale speed down below this speed."
msgstr "Slic3r的最小列印速度。"
#: src/libslic3r/PrintConfig.cpp:1240
msgid "Minimal filament extrusion length"
msgstr "最小耗材絲擠出長度"
#: src/libslic3r/PrintConfig.cpp:1241
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""
"在底層上消耗指定材料量生成環邊。對於多擠出頭的機器，該最小值適用於每個擠出"
"頭。"
#: src/libslic3r/PrintConfig.cpp:1250
msgid "Configuration notes"
msgstr "配置備註"
#: src/libslic3r/PrintConfig.cpp:1251
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""
"你可以在這裏輸入你的個人備註。該段文字內容將被添加到G代碼文件開頭的註釋裏。"
#: src/libslic3r/PrintConfig.cpp:1260
msgid "Nozzle diameter"
msgstr "噴嘴直徑"
#: src/libslic3r/PrintConfig.cpp:1261
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr "這是你的擠出頭噴嘴的直徑(比如：0.5,0.35等。)"
#: src/libslic3r/PrintConfig.cpp:1266
msgid "Host Type"
msgstr "主機類型"
#: src/libslic3r/PrintConfig.cpp:1267
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr "Slic3r 可以將 G-code 文件上載到印表機主機。此字段必須包含主機的類型。"
#: src/libslic3r/PrintConfig.cpp:1278
msgid "Only retract when crossing perimeters"
msgstr "僅在越過輪廓時回縮"
#: src/libslic3r/PrintConfig.cpp:1279
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr "當空程不超過上層輪廓時禁用回撤（這樣滴垂現象可能會看不見）。"
#: src/libslic3r/PrintConfig.cpp:1286
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""
"此選項將降低不活動擠出機的溫度, 以防止滲出。它將自動啓用一條高大的裙邊, 並在"
"溫度變化時將擠出機移到這種裙邊之外。"
#: src/libslic3r/PrintConfig.cpp:1293
msgid "Output filename format"
msgstr "輸出文件名稱格式"
#: src/libslic3r/PrintConfig.cpp:1294
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""
"可以使用所有的配置選項。如： [layer_height], [fill_density] 等。你也可以使用 "
"[timestamp], [year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]。"
#: src/libslic3r/PrintConfig.cpp:1303
msgid "Detect bridging perimeters"
msgstr "偵測橋接輪廓"
#: src/libslic3r/PrintConfig.cpp:1305
msgid ""
"Experimental option to adjust flow for overhangs (bridge flow will be used), "
"to apply bridge speed to them and enable fan."
msgstr ""
"試驗選項，用於調整懸空部位的流量（使用橋接流量），將橋接速度用於它們並啓用風"
"扇。"
#: src/libslic3r/PrintConfig.cpp:1311
msgid "Filament parking position"
msgstr "耗材絲停車位"
#: src/libslic3r/PrintConfig.cpp:1312
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware. "
msgstr "擠出機與卸載時耗材絲停放位置的距離。這應該與印表機固件中的值相匹配. "
#: src/libslic3r/PrintConfig.cpp:1320
msgid "Extra loading distance"
msgstr "額外的裝載長度"
#: src/libslic3r/PrintConfig.cpp:1321
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further, if negative, the loading move is shorter "
"than unloading. "
msgstr ""
"當設置爲零時, 燈絲在裝載過程中從停車位置移動的距離與卸載時移回的距離完全相"
"同。當正值時, 它將進一步加載, 如果爲負數, 則加載移動比卸載短. "
#: src/libslic3r/PrintConfig.cpp:1329 src/libslic3r/PrintConfig.cpp:1347
#: src/libslic3r/PrintConfig.cpp:1359 src/libslic3r/PrintConfig.cpp:1369
msgid "Perimeters"
msgstr "輪廓"
#: src/libslic3r/PrintConfig.cpp:1330
msgid ""
"This is the acceleration your printer will use for perimeters. A high value "
"like 9000 usually gives good results if your hardware is up to the job. Set "
"zero to disable acceleration control for perimeters."
msgstr ""
"印表機將用於列印輪廓的加速度。如果你的硬件性能足夠，一個9000這樣的高數值通常"
"會給出很好的列印效果。設爲0將禁用輪廓加速度控制。"
#: src/libslic3r/PrintConfig.cpp:1338
msgid "Perimeter extruder"
msgstr "輪廓擠出頭"
#: src/libslic3r/PrintConfig.cpp:1340
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr "列印輪廓和裙邊所使用的擠出頭。第一個擠出頭是1。"
#: src/libslic3r/PrintConfig.cpp:1349
msgid ""
"Set this to a non-zero value to set a manual extrusion width for perimeters. "
"You may want to use thinner extrudates to get more accurate surfaces. If "
"left zero, default extrusion width will be used if set, otherwise 1.125 x "
"nozzle diameter will be used. If expressed as percentage (for example 200%) "
"it will be computed over layer height."
msgstr ""
"將此設置爲非零值, 以手動設置邊界的擠出寬度。您可能需要使用更薄的擠出物來獲得"
"更精確的表面。如果爲零, 則如果設置, 將使用默認擠出寬度, 否則將使用 1.125 x 噴"
"嘴直徑。如果以百分比表示 (例如 200%), 則將在圖層高度上計算。"
#: src/libslic3r/PrintConfig.cpp:1361
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr "邊界的速度 (等高線, 也稱爲垂直殼)。自動設置爲零。"
#: src/libslic3r/PrintConfig.cpp:1371
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""
"該選項設置每一層生成的輪廓個數。注意，如果”額外輪廓“選項被啓動，Slic3r在偵測"
"到斜坡表面時可能會自動增加該數值，因爲較多的輪廓有利於斜坡表面的列印。"
#: src/libslic3r/PrintConfig.cpp:1375
msgid "(minimum)"
msgstr "（最小）"
#: src/libslic3r/PrintConfig.cpp:1383
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""
"如果要通過自定義腳本處理輸出 G-code , 只需在此處列出它們的絕對路徑即可。用分"
"號分隔多個腳本。腳本將作爲第一個參數傳遞到 G-code 文件的絕對路徑, 並且它們可"
"以通過讀取環境變量訪問 Slic3r 配置設置。"
#: src/libslic3r/PrintConfig.cpp:1395
msgid "Printer type"
msgstr "印表機類型"
#: src/libslic3r/PrintConfig.cpp:1396
msgid "Type of the printer."
msgstr "印表機的類型."
#: src/libslic3r/PrintConfig.cpp:1401
msgid "Printer notes"
msgstr "印表機備註"
#: src/libslic3r/PrintConfig.cpp:1402
msgid "You can put your notes regarding the printer here."
msgstr "您可以在此處放置有關印表機的備註."
#: src/libslic3r/PrintConfig.cpp:1410
msgid "Printer vendor"
msgstr "印表機供應商"
#: src/libslic3r/PrintConfig.cpp:1411
msgid "Name of the printer vendor."
msgstr "印表機供應商的名稱."
#: src/libslic3r/PrintConfig.cpp:1416
msgid "Printer variant"
msgstr "印表機版本"
#: src/libslic3r/PrintConfig.cpp:1417
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr "印表機變體的版本。例如, 印表機版本可以通過噴嘴直徑進行區分。"
#: src/libslic3r/PrintConfig.cpp:1430
msgid "Raft layers"
msgstr "筏板層"
#: src/libslic3r/PrintConfig.cpp:1432
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr "物體將被該數目的層數擡起，而支撐材料將在其下方生成。"
#: src/libslic3r/PrintConfig.cpp:1440
msgid "Resolution"
msgstr "分辨率"
#: src/libslic3r/PrintConfig.cpp:1441
msgid ""
"Minimum detail resolution, used to simplify the input file for speeding up "
"the slicing job and reducing memory usage. High-resolution models often "
"carry more detail than printers can render. Set to zero to disable any "
"simplification and use full resolution from input."
msgstr ""
"最小細節分辨率，用來簡化輸入文件，加速切片，減少內存佔用。印表機通常很難渲染"
"出高精度模型的細節。設爲0則禁用任何簡化，完全依照輸入文件的精度。"
#: src/libslic3r/PrintConfig.cpp:1451
msgid "Minimum travel after retraction"
msgstr "回縮後最小空程"
#: src/libslic3r/PrintConfig.cpp:1452
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr "當空程短於此長度時不會觸發回縮。"
#: src/libslic3r/PrintConfig.cpp:1458
msgid "Retract amount before wipe"
msgstr "擦拭前的回縮量"
#: src/libslic3r/PrintConfig.cpp:1459
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr "對於遠程擠出機, 在做擦拭動作之前, 做一些快速的收回可能是明智的。"
#: src/libslic3r/PrintConfig.cpp:1466
msgid "Retract on layer change"
msgstr "層變化時回縮"
#: src/libslic3r/PrintConfig.cpp:1467
msgid "This flag enforces a retraction whenever a Z move is done."
msgstr "該項強制在Z軸移動完成時回縮。"
#: src/libslic3r/PrintConfig.cpp:1472 src/libslic3r/PrintConfig.cpp:1480
msgid "Length"
msgstr "長度"
#: src/libslic3r/PrintConfig.cpp:1473
msgid "Retraction Length"
msgstr "回縮長度"
#: src/libslic3r/PrintConfig.cpp:1474
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""
"當觸發回縮時，絲料以指定值往回收縮（長度以在進入擠出頭之前的原始材料爲基礎進"
"行計算）。"
#: src/libslic3r/PrintConfig.cpp:1476 src/libslic3r/PrintConfig.cpp:1485
msgid "mm (zero to disable)"
msgstr "mm (0禁用)"
#: src/libslic3r/PrintConfig.cpp:1481
msgid "Retraction Length (Toolchange)"
msgstr "回縮長度 (工具更換)"
#: src/libslic3r/PrintConfig.cpp:1482
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""
"當在改變工具前觸發回縮時，絲料以指定值回縮（長度以進入擠出頭前的原始材料爲基"
"礎測量）。"
#: src/libslic3r/PrintConfig.cpp:1490
msgid "Lift Z"
msgstr "擡高Z"
#: src/libslic3r/PrintConfig.cpp:1491
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""
"如果設爲正值，每當回縮觸發時Z軸會快速擡升。當使用多個擠出頭時，僅會考慮第一個"
"擠出頭的該參數。"
#: src/libslic3r/PrintConfig.cpp:1498
msgid "Above Z"
msgstr "在Z上方"
#: src/libslic3r/PrintConfig.cpp:1499
msgid "Only lift Z above"
msgstr "僅提升 Z 高於"
#: src/libslic3r/PrintConfig.cpp:1500
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""
"如果設爲正值，僅在指定的絕對Z值上方纔會擡高Z。可以調整該參數，用於跳過在前幾"
"層時跳過Z擡高的步驟。"
#: src/libslic3r/PrintConfig.cpp:1507
msgid "Below Z"
msgstr "Z下方"
#: src/libslic3r/PrintConfig.cpp:1508
msgid "Only lift Z below"
msgstr "僅提升 Z 低於"
#: src/libslic3r/PrintConfig.cpp:1509
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""
"如果設爲正值，僅在指定的絕對Z值選房可以調整該參數，用於將擡高Z的動作限制在前"
"幾層時。"
#: src/libslic3r/PrintConfig.cpp:1517 src/libslic3r/PrintConfig.cpp:1525
msgid "Extra length on restart"
msgstr "重啓時額外長度"
#: src/libslic3r/PrintConfig.cpp:1518
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""
"當在空程後回縮被補償時，擠出頭會基礎額外的指定量絲料。該參數一般不需設置。"
#: src/libslic3r/PrintConfig.cpp:1526
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr "當在切換工具後回縮被補償時，擠出頭會基礎額外的指定量絲料。"
#: src/libslic3r/PrintConfig.cpp:1533 src/libslic3r/PrintConfig.cpp:1534
msgid "Retraction Speed"
msgstr "回抽速度"
#: src/libslic3r/PrintConfig.cpp:1535
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr "回縮速度 (僅適用於擠出機電機)."
#: src/libslic3r/PrintConfig.cpp:1541 src/libslic3r/PrintConfig.cpp:1542
msgid "Deretraction Speed"
msgstr "減速速度"
#: src/libslic3r/PrintConfig.cpp:1543
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""
"收回後將耗材絲裝入擠出機的速度 (僅適用於擠出機電機)。如果保持爲零, 則使用回縮"
"速度。"
#: src/libslic3r/PrintConfig.cpp:1550
msgid "Seam position"
msgstr "接合位置"
#: src/libslic3r/PrintConfig.cpp:1552
msgid "Position of perimeters starting points."
msgstr "輪廓開始點的位置。"
#: src/libslic3r/PrintConfig.cpp:1558
msgid "Random"
msgstr "隨機"
#: src/libslic3r/PrintConfig.cpp:1559
msgid "Nearest"
msgstr "最近的"
#: src/libslic3r/PrintConfig.cpp:1560
msgid "Aligned"
msgstr "對齊"
#: src/libslic3r/PrintConfig.cpp:1568
msgid "Direction"
msgstr "方向"
#: src/libslic3r/PrintConfig.cpp:1570
msgid "Preferred direction of the seam"
msgstr "接縫的首選方向"
#: src/libslic3r/PrintConfig.cpp:1571
msgid "Seam preferred direction"
msgstr "接縫首選方向"
#: src/libslic3r/PrintConfig.cpp:1578
msgid "Jitter"
msgstr "Jitter"
#: src/libslic3r/PrintConfig.cpp:1580
msgid "Seam preferred direction jitter"
msgstr "接縫首選方向抖動"
#: src/libslic3r/PrintConfig.cpp:1581
msgid "Preferred direction of the seam - jitter"
msgstr "接縫抖動的首選方向"
#: src/libslic3r/PrintConfig.cpp:1591
msgid "USB/serial port for printer connection."
msgstr "用於印表機連接的USB/串口。"
#: src/libslic3r/PrintConfig.cpp:1598
msgid "Serial port speed"
msgstr "串行端口速度"
#: src/libslic3r/PrintConfig.cpp:1599
msgid "Speed (baud) of USB/serial port for printer connection."
msgstr "用於印表機連接的USB/串口速度（波特率）。"
#: src/libslic3r/PrintConfig.cpp:1608
msgid "Distance from object"
msgstr "離物體的距離"
#: src/libslic3r/PrintConfig.cpp:1609
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr "環邊與物體間的距離。設爲0，則使環邊緊貼物體，可獲得裙邊利於粘附。"
#: src/libslic3r/PrintConfig.cpp:1616
msgid "Skirt height"
msgstr "環邊高度"
#: src/libslic3r/PrintConfig.cpp:1617
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr "圖層中表示的環邊高度。設爲一個較高值，可將環邊用作。"
#: src/libslic3r/PrintConfig.cpp:1624
msgid "Loops (minimum)"
msgstr "圈數(最小)"
#: src/libslic3r/PrintConfig.cpp:1625
msgid "Skirt Loops"
msgstr "裙邊圈數"
#: src/libslic3r/PrintConfig.cpp:1626
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""
"環邊的圈數。如果設置了最小擠出長度，那麼圈數必須比這裏設置的值要大。設爲0則完"
"全禁用環邊。"
#: src/libslic3r/PrintConfig.cpp:1634
msgid "Slow down if layer print time is below"
msgstr "如果圖層列印時間低於該值則減速"
#: src/libslic3r/PrintConfig.cpp:1635
msgid ""
"If layer print time is estimated below this number of seconds, print moves "
"speed will be scaled down to extend duration to this value."
msgstr ""
"如果預計列印時間低於該值（單位爲秒），則列印速度將降低以使列印時間延長到該"
"值。"
#: src/libslic3r/PrintConfig.cpp:1645
msgid "Small perimeters"
msgstr "小邊界"
#: src/libslic3r/PrintConfig.cpp:1647
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"此單獨設置將影響半徑爲 < = 6.5 mm (通常爲孔) 的邊界的速度。如果以百分比表示 "
"(例如: 80%), 則將根據上面的邊界速度設置進行計算。自動設置爲零。"
#: src/libslic3r/PrintConfig.cpp:1657
msgid "Solid infill threshold area"
msgstr "可靠填充閾值區域"
#: src/libslic3r/PrintConfig.cpp:1659
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr "對於比指定閾值小的區域強制進行可靠填充。"
#: src/libslic3r/PrintConfig.cpp:1660
msgid "mm²"
msgstr "mm²"
#: src/libslic3r/PrintConfig.cpp:1666
msgid "Solid infill extruder"
msgstr "可靠填充擠出頭"
#: src/libslic3r/PrintConfig.cpp:1668
msgid "The extruder to use when printing solid infill."
msgstr "當列印可靠填充時使用的擠出頭。"
#: src/libslic3r/PrintConfig.cpp:1674
msgid "Solid infill every"
msgstr "每幾層可靠填充"
#: src/libslic3r/PrintConfig.cpp:1676
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""
"該功能使得每指定數目層強制進行一次可靠填充。設爲0禁用該功能。可以設爲任意值"
"（如9999）；Slic3r會根據噴嘴直徑和層高來自動選擇圖層的最大可能個數。"
#: src/libslic3r/PrintConfig.cpp:1688
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"solid surfaces. If left zero, default extrusion width will be used if set, "
"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
"(for example 90%) it will be computed over layer height."
msgstr ""
"將其設置爲非零值, 爲實體曲面的填充設置手動擠出寬度。如果爲零, 則如果設置, 將"
"使用默認擠出寬度, 否則將使用 1.125 x 噴嘴直徑。如果以百分比表示 (例如 90%)它"
"將被計算在層的高度。"
#: src/libslic3r/PrintConfig.cpp:1698
msgid ""
"Speed for printing solid regions (top/bottom/internal horizontal shells). "
"This can be expressed as a percentage (for example: 80%) over the default "
"infill speed above. Set to zero for auto."
msgstr ""
"列印實心區域的速度 (頂部/內部水平外殼)。這可以用百分比表示 (例如: 80%)超過上"
"面的默認填充速度。自動設置爲零。"
#: src/libslic3r/PrintConfig.cpp:1710
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr "在頂部和底部表面生成的可靠層數。"
#: src/libslic3r/PrintConfig.cpp:1716
msgid "Spiral vase"
msgstr "螺旋式容器"
#: src/libslic3r/PrintConfig.cpp:1717
msgid ""
"This feature will raise Z gradually while printing a single-walled object in "
"order to remove any visible seam. This option requires a single perimeter, "
"no infill, no top solid layers and no support material. You can still set "
"any number of bottom solid layers as well as skirt/brim loops. It won't work "
"when printing more than an object."
msgstr ""
"該功能使得在列印單壁物體時會逐漸擡升Z，以便移除可見的縫合點。該選項要求單輪"
"廓，無填充，無頂部可靠層，無支撐。仍可以設置環邊、裙邊圈數，和底部可靠層。但"
"在列印多個物體時不適用。"
#: src/libslic3r/PrintConfig.cpp:1725
msgid "Temperature variation"
msgstr "溫度變化"
#: src/libslic3r/PrintConfig.cpp:1726
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""
"當擠出機處於非活動狀態時, 要應用溫差。啓用全高的 \"犧牲\" 裙邊, 定期擦拭噴"
"嘴。"
#: src/libslic3r/PrintConfig.cpp:1736
msgid ""
"This start procedure is inserted at the beginning, after bed has reached the "
"target temperature and extruder just started heating, and before extruder "
"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
"such commands will not be prepended automatically so you're free to "
"customize the order of heating commands and other custom actions. Note that "
"you can use placeholder variables for all Slic3r settings, so you can put a "
"\"M109 S[first_layer_temperature]\" command wherever you want."
msgstr ""
"此啓動過程在開始時插入, 牀層達到目標溫度後, 擠出機纔開始加熱, 然後擠出機才完"
"成加熱。如果 Slic3r 在自定義代碼中檢測到 M104 或 M190, 則不會自動前置此類命"
"令, 因此您可以自由自定義加熱命令和其他自定義操作的順序。請注意, 您可以對所有 "
"Slic3r 設置使用佔位符變量, 因此您可以將 \"M109 S[first_layer_temperature]\" "
"命令放在任何需要的地方。"
#: src/libslic3r/PrintConfig.cpp:1751
msgid ""
"This start procedure is inserted at the beginning, after any printer start "
"gcode. This is used to override settings for a specific filament. If Slic3r "
"detects M104, M109, M140 or M190 in your custom codes, such commands will "
"not be prepended automatically so you're free to customize the order of "
"heating commands and other custom actions. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 "
"S[first_layer_temperature]\" command wherever you want. If you have multiple "
"extruders, the gcode is processed in extruder order."
msgstr ""
"該段代碼放在G代碼開頭，在所有印表機起始G代碼後插入。用於覆蓋指定材料的參數。"
"該段代碼放在G代碼開頭，在熱牀達到目標溫度、擠出頭開始加熱後，擠出頭完成加熱前"
"插入。如果其中不包含有M104, M109, M140 或 M190，這段指令就會在Slic3r自動放置"
"的M指令之後；否則Slic3r將不會自動生成M指令，這樣你可以自由定義加熱命令和其他"
"自定義動作的順序。注意可以使用佔位符變量替代所有Slic3r參數，所以你可以把一"
"個“M109 S[ first_layer_temperature ]”命令放在任意處。如果你有多個擠出頭，G代"
"碼將按擠出頭順序處理。"
#: src/libslic3r/PrintConfig.cpp:1766
msgid "Single Extruder Multi Material"
msgstr "單擠出機多材料"
#: src/libslic3r/PrintConfig.cpp:1767
msgid "The printer multiplexes filaments into a single hot end."
msgstr "印表機將耗材絲多路複用到一個熱端。"
#: src/libslic3r/PrintConfig.cpp:1772
msgid "Prime all printing extruders"
msgstr "裝填所有印刷擠出機"
#: src/libslic3r/PrintConfig.cpp:1773
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr "如果啓用, 所有列印擠出機都將在列印開始時在列印牀的前緣進行裝填。"
#: src/libslic3r/PrintConfig.cpp:1778
msgid "Generate support material"
msgstr "生成支撐材料"
#: src/libslic3r/PrintConfig.cpp:1780
msgid "Enable support material generation."
msgstr "啓用支撐材料生成功能。"
#: src/libslic3r/PrintConfig.cpp:1784
msgid "Auto generated supports"
msgstr "自動生成支撐"
#: src/libslic3r/PrintConfig.cpp:1786
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""
"如果選中, 將根據懸垂閾值自動生成支持。如果未選中, 則僅在 \"支撐執行器\" 空間"
"內生成支持。"
#: src/libslic3r/PrintConfig.cpp:1792
msgid "XY separation between an object and its support"
msgstr "對象與其支撐之間的 XY 分離距離"
#: src/libslic3r/PrintConfig.cpp:1794
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""
"對象與其支撐之間的 xy 分離距離。如果表示爲百分比 (例如 50%), 則將根據外部外圍"
"寬度計算。"
#: src/libslic3r/PrintConfig.cpp:1804
msgid "Pattern angle"
msgstr "樣式角度"
#: src/libslic3r/PrintConfig.cpp:1806
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr "使用該參數對支撐材料的樣子在水平面上進行旋轉。"
#: src/libslic3r/PrintConfig.cpp:1816 src/libslic3r/PrintConfig.cpp:2421
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr "僅在熱牀上生成支撐，不在列印出來的物體上生成。"
#: src/libslic3r/PrintConfig.cpp:1822
msgid "Contact Z distance"
msgstr "接觸Z值"
#: src/libslic3r/PrintConfig.cpp:1824
msgid ""
"The vertical distance between object and support material interface. Setting "
"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
"first object layer."
msgstr ""
"物體和支撐材料平面之間的垂直距離。設爲0，則表面上第一層不會被當做橋來處理。"
#: src/libslic3r/PrintConfig.cpp:1831
msgid "soluble"
msgstr "可溶"
#: src/libslic3r/PrintConfig.cpp:1832
msgid "detachable"
msgstr "可拆卸"
#: src/libslic3r/PrintConfig.cpp:1837
msgid "Enforce support for the first"
msgstr "前幾層增強支撐"
#: src/libslic3r/PrintConfig.cpp:1839
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""
"從底部開始，對指定數目的圖層生成支撐材料，無論正常的支撐材料是否啓用，也不管"
"任何角度閾值。適用於在熱牀上腳太細、站不住的物件，便於更好的粘附。"
#: src/libslic3r/PrintConfig.cpp:1844
msgid "Enforce support for the first n layers"
msgstr "強制支撐前 n 層"
#: src/libslic3r/PrintConfig.cpp:1850
msgid "Support material/raft/skirt extruder"
msgstr "支撐材料/筏/環邊擠出頭"
#: src/libslic3r/PrintConfig.cpp:1852
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""
"列印支撐材料、基座和裙邊時使用的擠出機 (1+, 0 用於使用當前擠出機以最大限度地"
"減少工具切換)."
#: src/libslic3r/PrintConfig.cpp:1861
msgid ""
"Set this to a non-zero value to set a manual extrusion width for support "
"material. If left zero, default extrusion width will be used if set, "
"otherwise nozzle diameter will be used. If expressed as percentage (for "
"example 90%) it will be computed over layer height."
msgstr ""
"將其設置爲非零值, 以設置支持材料的手動擠出寬度。如果爲零, 則如果設置, 將使用"
"默認的擠出寬度, 否則將使用噴嘴直徑。如果以百分比表示 (例如 90%)它將根據層的高"
"度計算。"
#: src/libslic3r/PrintConfig.cpp:1869
msgid "Interface loops"
msgstr "接觸面圈數"
#: src/libslic3r/PrintConfig.cpp:1871
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr "用循環覆蓋支撐物的頂部接觸層。默認情況下禁用。"
#: src/libslic3r/PrintConfig.cpp:1876
msgid "Support material/raft interface extruder"
msgstr "支撐材料/筏表面擠出頭"
#: src/libslic3r/PrintConfig.cpp:1878
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""
"列印支撐材料界面時要使用的擠出機 (1+, 0 用於使用當前擠出機以最大限度地減少工"
"具切換)。這也會影響基座."
#: src/libslic3r/PrintConfig.cpp:1885
msgid "Interface layers"
msgstr "表面層數"
#: src/libslic3r/PrintConfig.cpp:1887
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr "在物體和支撐材料中間插入的表面層數。"
#: src/libslic3r/PrintConfig.cpp:1894
msgid "Interface pattern spacing"
msgstr "表面樣式間隔"
#: src/libslic3r/PrintConfig.cpp:1896
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr "表面直線間的間隔。設爲0獲得可靠表面。"
#: src/libslic3r/PrintConfig.cpp:1905
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""
"列印支撐材料表面層的速度。若表示爲百分數（如50%），則以支撐材料速度爲基準計"
"算。"
#: src/libslic3r/PrintConfig.cpp:1914
msgid "Pattern"
msgstr "樣式"
#: src/libslic3r/PrintConfig.cpp:1916
msgid "Pattern used to generate support material."
msgstr "生成支撐材料的樣式。"
#: src/libslic3r/PrintConfig.cpp:1922
msgid "Rectilinear grid"
msgstr "直線網格"
#: src/libslic3r/PrintConfig.cpp:1928
msgid "Pattern spacing"
msgstr "樣式間隔"
#: src/libslic3r/PrintConfig.cpp:1930
msgid "Spacing between support material lines."
msgstr "支撐材料直線間的間隙。"
#: src/libslic3r/PrintConfig.cpp:1939
msgid "Speed for printing support material."
msgstr "列印支撐材料的速度。"
#: src/libslic3r/PrintConfig.cpp:1946
msgid "Synchronize with object layers"
msgstr "與對象圖層同步"
#: src/libslic3r/PrintConfig.cpp:1948
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""
"將支撐圖層與對象列印圖層同步。這對於多材料印表機非常有用, 因爲在這種印表機"
"中, 擠出機切換非常不划算."
#: src/libslic3r/PrintConfig.cpp:1954
msgid "Overhang threshold"
msgstr "懸空閾值"
#: src/libslic3r/PrintConfig.cpp:1956
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""
"對於坡度角度 (90° = 垂直) 高於給定閾值的懸空部分, 將不會生成支撐材料。換句話"
"說, 此值表示在沒有支撐材料的情況下可以列印的最水平坡度 (從水平面測量)。設置爲"
"零, 用於自動檢測 (推薦)。"
#: src/libslic3r/PrintConfig.cpp:1968
msgid "With sheath around the support"
msgstr "用護套圍繞支撐"
#: src/libslic3r/PrintConfig.cpp:1970
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""
"在基礎支架周圍添加護套 (一條外圍線)。這使得支持更可靠, 但也更難以移除。"
#: src/libslic3r/PrintConfig.cpp:1977
msgid ""
"Extruder temperature for layers after the first one. Set this to zero to "
"disable temperature control commands in the output."
msgstr "第一層之後的擠出頭溫度。設爲0以在輸出文件中禁用溫度控制指令。"
#: src/libslic3r/PrintConfig.cpp:1979
msgid "Temperature"
msgstr "溫度"
#: src/libslic3r/PrintConfig.cpp:1985
msgid "Detect thin walls"
msgstr "檢測薄壁"
#: src/libslic3r/PrintConfig.cpp:1987
msgid ""
"Detect single-width walls (parts where two extrusions don't fit and we need "
"to collapse them into a single trace)."
msgstr ""
"檢測單一厚度的薄壁（兩個擠出量不吻合，以至於需要把它們壓縮成一條軌跡的地"
"方）。"
#: src/libslic3r/PrintConfig.cpp:1993
msgid "Threads"
msgstr "線程"
#: src/libslic3r/PrintConfig.cpp:1994
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr "線程用於並行處理長時間任務。最優的線程數應比可用核/處理器的數目略多。"
#: src/libslic3r/PrintConfig.cpp:2006
msgid ""
"This custom code is inserted right before every extruder change. Note that "
"you can use placeholder variables for all Slic3r settings as well as "
"[previous_extruder] and [next_extruder]."
msgstr ""
"該段自定義代碼在每次擠出頭切換前插入。注意可以使用佔位符變量代替Slic3r的所有"
"參數，如 [previous_extruder] 和 [next_extruder]。"
#: src/libslic3r/PrintConfig.cpp:2018
msgid ""
"Set this to a non-zero value to set a manual extrusion width for infill for "
"top surfaces. You may want to use thinner extrudates to fill all narrow "
"regions and get a smoother finish. If left zero, default extrusion width "
"will be used if set, otherwise nozzle diameter will be used. If expressed as "
"percentage (for example 90%) it will be computed over layer height."
msgstr ""
"將其設置爲非零值, 爲頂部曲面的填充設置手動擠出寬度。您可能需要使用更薄的擠出"
"物來填充所有狹窄的區域, 並獲得更平滑的完成。如果爲零, 則如果設置, 將使用默認"
"的擠出寬度, 否則將使用噴嘴直徑。如果以百分比表示 (例如 90%)它將被計算在層的高"
"度。"
#: src/libslic3r/PrintConfig.cpp:2029
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""
"列印頂部實體圖層的速度 (它僅適用於最上面的外部圖層, 而不適用於其內部實體圖"
"層)。你可能想放慢速度, 以獲得更好的表面光潔度。這可以用百分比表示 (例如: 80%)"
"以上的固體填充速度。自動設置爲零。"
#: src/libslic3r/PrintConfig.cpp:2043
msgid "Number of solid layers to generate on top surfaces."
msgstr "在頂部表面上生成的可靠層數。"
#: src/libslic3r/PrintConfig.cpp:2044
msgid "Top solid layers"
msgstr "頂部實心層"
#: src/libslic3r/PrintConfig.cpp:2050
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr "空程移動的速度（從一個擠出點結束調到另一個擠出點開始）。"
#: src/libslic3r/PrintConfig.cpp:2058
msgid "Use firmware retraction"
msgstr "使用固件回縮"
#: src/libslic3r/PrintConfig.cpp:2059
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""
"該試驗參數使用G10和G11指令來使固件處理回縮。僅在最新的Marlin中支持該功能。"
#: src/libslic3r/PrintConfig.cpp:2065
msgid "Use relative E distances"
msgstr "使用相對E距離"
#: src/libslic3r/PrintConfig.cpp:2066
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr "如果固件需要相對E值，勾選此項，否則不要勾選。大部分固件使用絕對值。"
#: src/libslic3r/PrintConfig.cpp:2072
msgid "Use volumetric E"
msgstr "使用體積E"
#: src/libslic3r/PrintConfig.cpp:2073
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""
"該試驗參數在E值中使用立方米爲單位，而非毫米。如果固件不知道絲料直徑，你可以在"
"起始G代碼中輸入如'M200 D[filament_diameter_0] T0' 以開啓體積模式，並使用在"
"Slic3r中已選的絲料直徑。僅在最新Marlin中支持該功能。"
#: src/libslic3r/PrintConfig.cpp:2083
msgid "Enable variable layer height feature"
msgstr "啓用可變圖層高度功能"
#: src/libslic3r/PrintConfig.cpp:2084
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""
"某些印表機或印表機設置可能難以使用可變圖層高度進行列印。默認情況下啓用。"
#: src/libslic3r/PrintConfig.cpp:2090
msgid "Wipe while retracting"
msgstr "回縮時擦拭"
#: src/libslic3r/PrintConfig.cpp:2091
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr "在回縮時移動噴嘴以避免擠出頭滴漏。"
#: src/libslic3r/PrintConfig.cpp:2098
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""
"多材料印表機可能需要對工具更換進行填充清洗或清除擠出機。將多餘的材料擠出到擦"
"料塔中."
#: src/libslic3r/PrintConfig.cpp:2104
msgid "Purging volumes - load/unload volumes"
msgstr "清除量-加載/卸載卷"
#: src/libslic3r/PrintConfig.cpp:2105
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below. "
msgstr ""
"此矢量保存每個工具更改擠出到擦料塔所需的量。這些值用於簡化下面的完整清除量的"
"創建。 "
#: src/libslic3r/PrintConfig.cpp:2111
msgid "Purging volumes - matrix"
msgstr "清除量-矩陣"
#: src/libslic3r/PrintConfig.cpp:2112
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools. "
msgstr ""
"此矩陣描述了爲任何給定的一對工具清除擦料塔上的新耗材絲所需的量 (以立方毫秒爲"
"單位). "
#: src/libslic3r/PrintConfig.cpp:2121
msgid "Position X"
msgstr "橫向位置X"
#: src/libslic3r/PrintConfig.cpp:2122
msgid "X coordinate of the left front corner of a wipe tower"
msgstr "擦料塔左前角的 X 座標"
#: src/libslic3r/PrintConfig.cpp:2128
msgid "Position Y"
msgstr "縱向位置Y"
#: src/libslic3r/PrintConfig.cpp:2129
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr "擦拭塔左前角的 Y 座標"
#: src/libslic3r/PrintConfig.cpp:2136
msgid "Width of a wipe tower"
msgstr "擦料塔的寬度"
#: src/libslic3r/PrintConfig.cpp:2142
msgid "Wipe tower rotation angle"
msgstr "擦料塔旋轉角度"
#: src/libslic3r/PrintConfig.cpp:2143
msgid "Wipe tower rotation angle with respect to x-axis "
msgstr "擦料塔相對於 x 軸的旋轉角度 "
#: src/libslic3r/PrintConfig.cpp:2144 src/libslic3r/PrintConfig.cpp:2565
msgid "degrees"
msgstr "度"
#: src/libslic3r/PrintConfig.cpp:2150
msgid "Wipe into this object's infill"
msgstr "擦入此物體的填充"
#: src/libslic3r/PrintConfig.cpp:2151
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time due to additional "
"travel moves."
msgstr ""
"工具更改後的熱頭清除將在此對象的填充內完成。這降低了浪費量, 但可能會導致更長"
"的列印時間, 由於額外的移動。"
#: src/libslic3r/PrintConfig.cpp:2158
msgid "Wipe into this object"
msgstr "擦入此物體的填充"
#: src/libslic3r/PrintConfig.cpp:2159
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"對象將用於在工具更改後清除噴嘴, 以節省在擦除塔中浪費的材料並減少列印時間。因"
"此, 對象的顏色將混合在一起。"
#: src/libslic3r/PrintConfig.cpp:2165
msgid "Maximal bridging distance"
msgstr "最大橋接距離"
#: src/libslic3r/PrintConfig.cpp:2166
msgid "Maximal distance between supports on sparse infill sections. "
msgstr "稀疏填充部分上的支撐之間的最大距離. "
#: src/libslic3r/PrintConfig.cpp:2172
msgid "XY Size Compensation"
msgstr "XY尺寸補償"
#: src/libslic3r/PrintConfig.cpp:2174
msgid ""
"The object will be grown/shrunk in the XY plane by the configured value "
"(negative = inwards, positive = outwards). This might be useful for fine-"
"tuning hole sizes."
msgstr ""
"該物體將以指定值（負=往內，正=往外）變大/收縮。對於精確調節孔洞尺寸可能有用。"
#: src/libslic3r/PrintConfig.cpp:2182
msgid "Z offset"
msgstr "Z補償"
#: src/libslic3r/PrintConfig.cpp:2183
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""
"在輸出G代碼中，所有Z座標將在原基礎上增大（或減少）該數值。用來對糟糕的Z終點擋"
"板位置進行補償，如果你的終點擋板爲零時，噴嘴離列印熱牀還有0.3毫米，將該值設"
"爲-0.3（或者調整你的終點擋板）。"
#: src/libslic3r/PrintConfig.cpp:2200
msgid "Display width"
msgstr "顯示寬度"
#: src/libslic3r/PrintConfig.cpp:2201
msgid "Width of the display"
msgstr "顯示寬度"
#: src/libslic3r/PrintConfig.cpp:2206
msgid "Display height"
msgstr "顯示高度"
#: src/libslic3r/PrintConfig.cpp:2207
msgid "Height of the display"
msgstr "顯示高度"
#: src/libslic3r/PrintConfig.cpp:2212
msgid "Number of pixels in"
msgstr "像素點的數量"
#: src/libslic3r/PrintConfig.cpp:2214
msgid "Number of pixels in X"
msgstr "X 中的像素數"
#: src/libslic3r/PrintConfig.cpp:2220
msgid "Number of pixels in Y"
msgstr "Y 中的像素數"
#: src/libslic3r/PrintConfig.cpp:2225
msgid "Display orientation"
msgstr "顯示方向"
#: src/libslic3r/PrintConfig.cpp:2226
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""
"在 SLA 印表機內設置實際的 LCD 顯示方向。人像模式將翻轉顯示寬度和高度參數的含"
"義, 輸出圖像將旋轉90度。"
#: src/libslic3r/PrintConfig.cpp:2232
msgid "Landscape"
msgstr "景觀"
#: src/libslic3r/PrintConfig.cpp:2233
msgid "Portrait"
msgstr "肖像"
#: src/libslic3r/PrintConfig.cpp:2238
msgid "Fast"
msgstr "快"
#: src/libslic3r/PrintConfig.cpp:2239
msgid "Fast tilt"
msgstr "快速傾斜"
#: src/libslic3r/PrintConfig.cpp:2240
msgid "Time of the fast tilt"
msgstr "快速傾斜的時間"
#: src/libslic3r/PrintConfig.cpp:2247
msgid "Slow"
msgstr "慢"
#: src/libslic3r/PrintConfig.cpp:2248
msgid "Slow tilt"
msgstr "緩慢傾斜"
#: src/libslic3r/PrintConfig.cpp:2249
msgid "Time of the slow tilt"
msgstr "緩慢傾斜的時間"
#: src/libslic3r/PrintConfig.cpp:2256
msgid "Area fill"
msgstr "區域填充"
#: src/libslic3r/PrintConfig.cpp:2257
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""
"牀面積的百分比。\n"
"如果列印區域超過指定的值,\n"
"然後一個緩慢的傾斜將被使用, 否則-一個快速傾斜"
#: src/libslic3r/PrintConfig.cpp:2264 src/libslic3r/PrintConfig.cpp:2265
#: src/libslic3r/PrintConfig.cpp:2266
msgid "Printer scaling correction"
msgstr "印表機縮放校正"
#: src/libslic3r/PrintConfig.cpp:2272 src/libslic3r/PrintConfig.cpp:2273
msgid "Printer absolute correction"
msgstr "印表機絕對校正"
#: src/libslic3r/PrintConfig.cpp:2274
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr "將根據校正的符號對切片的2D 多邊形進行放大或收縮。"
#: src/libslic3r/PrintConfig.cpp:2280 src/libslic3r/PrintConfig.cpp:2281
msgid "Printer gamma correction"
msgstr "印表機伽瑪校正"
#: src/libslic3r/PrintConfig.cpp:2282
msgid "This will apply a gamm correction to the rasterized 2D polygons."
msgstr "這將對柵格化的2D 多邊形應用伽瑪校正。"
#: src/libslic3r/PrintConfig.cpp:2291 src/libslic3r/PrintConfig.cpp:2292
msgid "Initial layer height"
msgstr "初始圖層高度"
#: src/libslic3r/PrintConfig.cpp:2298
msgid "Faded layers"
msgstr "淡入淡出的圖層"
#: src/libslic3r/PrintConfig.cpp:2299
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr "曝光時間所需的層數從最初的曝光時間消失到曝光時間"
#: src/libslic3r/PrintConfig.cpp:2306 src/libslic3r/PrintConfig.cpp:2307
msgid "Exposure time"
msgstr "曝光時間"
#: src/libslic3r/PrintConfig.cpp:2313 src/libslic3r/PrintConfig.cpp:2314
msgid "Initial exposure time"
msgstr "初始曝光時間"
#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2321
msgid "Correction for expansion"
msgstr "擴展的更正"
#: src/libslic3r/PrintConfig.cpp:2327
msgid "SLA print material notes"
msgstr "SLA 列印材料註釋"
#: src/libslic3r/PrintConfig.cpp:2328
msgid "You can put your notes regarding the SLA print material here."
msgstr "您可以在此處放置有關 sla 列印材料的註釋."
#: src/libslic3r/PrintConfig.cpp:2336 src/libslic3r/PrintConfig.cpp:2347
msgid "Default SLA material profile"
msgstr "默認 SLA 材料配置文件"
#: src/libslic3r/PrintConfig.cpp:2358
msgid "Generate supports"
msgstr "生成支撐"
#: src/libslic3r/PrintConfig.cpp:2360
msgid "Generate supports for the models"
msgstr "生成模型的支撐"
#: src/libslic3r/PrintConfig.cpp:2365
msgid "Support head front diameter"
msgstr "支撐頭前徑"
#: src/libslic3r/PrintConfig.cpp:2367
msgid "Diameter of the pointing side of the head"
msgstr "頭部指向側的直徑"
#: src/libslic3r/PrintConfig.cpp:2374
msgid "Support head penetration"
msgstr "支持頭部滲透"
#: src/libslic3r/PrintConfig.cpp:2376
msgid "How much the pinhead has to penetrate the model surface"
msgstr "針頭穿透模型表面的程度"
#: src/libslic3r/PrintConfig.cpp:2383
msgid "Support head width"
msgstr "支撐頭部寬度"
#: src/libslic3r/PrintConfig.cpp:2385
msgid "Width from the back sphere center to the front sphere center"
msgstr "從後球體中心到前球體中心的寬度"
#: src/libslic3r/PrintConfig.cpp:2393
msgid "Support pillar diameter"
msgstr "支撐柱直徑"
#: src/libslic3r/PrintConfig.cpp:2395
msgid "Diameter in mm of the support pillars"
msgstr "支撐柱直徑 (毫米)"
#: src/libslic3r/PrintConfig.cpp:2403
msgid "Support pillar connection mode"
msgstr "支持支柱連接模式"
#: src/libslic3r/PrintConfig.cpp:2404
msgid ""
"Controls the bridge type between two neigboring pillars. Can be zig-zag, "
"cross (double zig-zag) or dynamic which will automatically switch between "
"the first two depending on the distance of the two pillars."
msgstr ""
"控制兩個網孔柱之間的橋型。可以是鋸齒形、交叉 (雙鋸齒形) 或動態, 根據兩根柱子"
"的距離, 它們會自動在前兩個支柱之間切換。"
#: src/libslic3r/PrintConfig.cpp:2412
msgid "Zig-Zag"
msgstr "鋸齒形"
#: src/libslic3r/PrintConfig.cpp:2413
msgid "Cross"
msgstr "交叉"
#: src/libslic3r/PrintConfig.cpp:2414
msgid "Dynamic"
msgstr "動態"
#: src/libslic3r/PrintConfig.cpp:2426
msgid "Pillar widening factor"
msgstr "支柱加寬係數"
#: src/libslic3r/PrintConfig.cpp:2428
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""
"將橋樑或柱子合併到另一個柱子中可以增加半徑。零意味着沒有增加,1意味着全增加。"
#: src/libslic3r/PrintConfig.cpp:2437
msgid "Support base diameter"
msgstr "支撐底座直徑"
#: src/libslic3r/PrintConfig.cpp:2439
msgid "Diameter in mm of the pillar base"
msgstr "柱底座直徑 (毫米)"
#: src/libslic3r/PrintConfig.cpp:2447
msgid "Support base height"
msgstr "支撐基座高度"
#: src/libslic3r/PrintConfig.cpp:2449
msgid "The height of the pillar base cone"
msgstr "柱基錐的高度"
#: src/libslic3r/PrintConfig.cpp:2456
msgid "Critical angle"
msgstr "臨界角度"
#: src/libslic3r/PrintConfig.cpp:2458
msgid "The default angle for connecting support sticks and junctions."
msgstr "連接支撐杆和連接點的默認角度。"
#: src/libslic3r/PrintConfig.cpp:2466
msgid "Max bridge length"
msgstr "最大橋長"
#: src/libslic3r/PrintConfig.cpp:2468
msgid "The max length of a bridge"
msgstr "橋的最大長度"
#: src/libslic3r/PrintConfig.cpp:2475
msgid "Max pillar linking distance"
msgstr "最大柱連接距離"
#: src/libslic3r/PrintConfig.cpp:2477
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr "兩個支柱的最大距離, 以相互連接。零值將禁止柱級聯。"
#: src/libslic3r/PrintConfig.cpp:2485
msgid "Object elevation"
msgstr "對象高程"
#: src/libslic3r/PrintConfig.cpp:2487
msgid "How much the supports should lift up the supported object."
msgstr "支撐提升被支撐的對象的高度."
#: src/libslic3r/PrintConfig.cpp:2495
msgid "Support points density"
msgstr "支撐點密度"
#: src/libslic3r/PrintConfig.cpp:2497
msgid "This is a relative measure of support points density."
msgstr "這是支持點密度的相對度量。"
#: src/libslic3r/PrintConfig.cpp:2503
msgid "Minimal distance of the support points"
msgstr "支撐點的最小距離"
#: src/libslic3r/PrintConfig.cpp:2505
msgid "No support points will be placed closer than this threshold."
msgstr "沒有任何支助點將被放置在比這一閾值更近的地方。"
#: src/libslic3r/PrintConfig.cpp:2511
msgid "Use pad"
msgstr "使用墊"
#: src/libslic3r/PrintConfig.cpp:2513
msgid "Add a pad underneath the supported model"
msgstr "在支撐模型下添加一個墊"
#: src/libslic3r/PrintConfig.cpp:2518
msgid "Pad wall thickness"
msgstr "墊壁厚度"
#: src/libslic3r/PrintConfig.cpp:2520
msgid "The thickness of the pad and its optional cavity walls."
msgstr "墊片的厚度及其可選的空腔壁。"
#: src/libslic3r/PrintConfig.cpp:2528
msgid "Pad wall height"
msgstr "墊壁高度"
#: src/libslic3r/PrintConfig.cpp:2529
msgid "Defines the cavity depth. Set to zero to disable the cavity."
msgstr "定義空腔深度。設置爲零以禁用空腔。"
#: src/libslic3r/PrintConfig.cpp:2539
msgid "Max merge distance"
msgstr "最大合併距離"
#: src/libslic3r/PrintConfig.cpp:2541
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""
"有些物體可以與幾個較小的墊子在一起, 而不是一個大的墊子。此參數定義兩個較小墊"
"的中心應該有多遠。如果它們更接近, 它們將被合併成一個墊子。"
#: src/libslic3r/PrintConfig.cpp:2552
msgid "Pad edge radius"
msgstr "墊邊半徑"
#: src/libslic3r/PrintConfig.cpp:2561
msgid "Pad wall slope"
msgstr "墊壁坡度"
#: src/libslic3r/PrintConfig.cpp:2563
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr "墊壁相對於牀面的斜率。90度意味着直牆。"
#: src/libslic3r/PrintConfig.cpp:2924
msgid "Export SVG"
msgstr "導出 SVG"
#: src/libslic3r/PrintConfig.cpp:2925
msgid "Export the model(s) as OBJ."
msgstr "將模型導出爲 OBJ。"
#: src/libslic3r/PrintConfig.cpp:2936
msgid "Export SLA"
msgstr "導出 SLA"
#: src/libslic3r/PrintConfig.cpp:2937
msgid "Slice the model and export SLA printing layers as PNG."
msgstr "將模型切片, 並將 SLA 列印圖層導出爲 PNG。"
#: src/libslic3r/PrintConfig.cpp:2942
msgid "Export 3MF"
msgstr "導出 3MF"
#: src/libslic3r/PrintConfig.cpp:2943
msgid "Export the model(s) as 3MF."
msgstr "將模型導出爲3MF。"
#: src/libslic3r/PrintConfig.cpp:2947
msgid "Export AMF"
msgstr "導出 AMF"
#: src/libslic3r/PrintConfig.cpp:2948
msgid "Export the model(s) as AMF."
msgstr "將模型導出爲 AMF。"
#: src/libslic3r/PrintConfig.cpp:2952
msgid "Export STL"
msgstr "導出STL Export STL"
#: src/libslic3r/PrintConfig.cpp:2953
msgid "Export the model(s) as STL."
msgstr "將模型導出爲 STL。"
#: src/libslic3r/PrintConfig.cpp:2958
msgid "Slice the model and export toolpaths as G-code."
msgstr "將模型切片並將刀具路徑導出爲 G 代碼。"
#: src/libslic3r/PrintConfig.cpp:2963
msgid "Slice"
msgstr "切片"
#: src/libslic3r/PrintConfig.cpp:2964
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr "根據印表機技術配置值將模型切片爲 FFF 或 SLA。"
#: src/libslic3r/PrintConfig.cpp:2969
msgid "Help"
msgstr "幫助"
#: src/libslic3r/PrintConfig.cpp:2970
msgid "Show this help."
msgstr "顯示此幫助。"
#: src/libslic3r/PrintConfig.cpp:2975
msgid "Help (FFF options)"
msgstr "幫助 (FFF 選項)"
#: src/libslic3r/PrintConfig.cpp:2976
msgid "Show the full list of print/G-code configuration options."
msgstr "顯示列印代碼配置選項的完整列表。"
#: src/libslic3r/PrintConfig.cpp:2980
msgid "Help (SLA options)"
msgstr "幫助 (SLA 選項)"
#: src/libslic3r/PrintConfig.cpp:2981
msgid "Show the full list of SLA print configuration options."
msgstr "顯示 SLA 列印配置選項的完整列表。"
#: src/libslic3r/PrintConfig.cpp:2985
msgid "Output Model Info"
msgstr "輸出模型信息"
#: src/libslic3r/PrintConfig.cpp:2986
msgid "Write information about the model to the console."
msgstr "給控制檯寫入模型的信息。"
#: src/libslic3r/PrintConfig.cpp:2990
msgid "Save config file"
msgstr "保存配置文件"
#: src/libslic3r/PrintConfig.cpp:2991
msgid "Save configuration to the specified file."
msgstr "將配置參數保存到指定文件。"
#: src/libslic3r/PrintConfig.cpp:3001
msgid "Align XY"
msgstr "對齊 XY"
#: src/libslic3r/PrintConfig.cpp:3002
msgid "Align the model to the given point."
msgstr "將模型對齊到給定點。"
#: src/libslic3r/PrintConfig.cpp:3007
msgid "Cut model at the given Z."
msgstr "在給定Z處切割模型。"
#: src/libslic3r/PrintConfig.cpp:3028
msgid "Center"
msgstr "居中"
#: src/libslic3r/PrintConfig.cpp:3029
msgid "Center the print around the given center."
msgstr "將列印內容集中在給定的中心周圍。"
#: src/libslic3r/PrintConfig.cpp:3033
msgid "Don't arrange"
msgstr "不要排列布局"
#: src/libslic3r/PrintConfig.cpp:3034
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr "在合併之前, 不要重新排列給定的模型, 並保留其原始 XY 座標。"
#: src/libslic3r/PrintConfig.cpp:3037
msgid "Duplicate"
msgstr "複製"
#: src/libslic3r/PrintConfig.cpp:3038
msgid "Multiply copies by this factor."
msgstr "按此倍數增加副本。"
#: src/libslic3r/PrintConfig.cpp:3042
msgid "Duplicate by grid"
msgstr "按網格複製"
#: src/libslic3r/PrintConfig.cpp:3043
msgid "Multiply copies by creating a grid."
msgstr "通過創建網格將副本增加。"
#: src/libslic3r/PrintConfig.cpp:3046
msgid "Merge"
msgstr "合併"
#: src/libslic3r/PrintConfig.cpp:3047
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""
"將提供的模型排列在一個平板中, 並將它們合併到一個模型中, 以便執行一次操作。"
#: src/libslic3r/PrintConfig.cpp:3052
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""
"嘗試修復任何非流形網格 (每當我們需要對模型進行切片以執行請求的操作時, 都會隱"
"式添加此選項)。"
#: src/libslic3r/PrintConfig.cpp:3056
msgid "Rotation angle around the Z axis in degrees."
msgstr "圍繞 Z 軸的旋轉角度 (以度爲單位)。"
#: src/libslic3r/PrintConfig.cpp:3060
msgid "Rotate around X"
msgstr "繞X軸旋轉"
#: src/libslic3r/PrintConfig.cpp:3061
msgid "Rotation angle around the X axis in degrees."
msgstr "圍繞 X 軸的旋轉角度 (以度爲單位)。"
#: src/libslic3r/PrintConfig.cpp:3065
msgid "Rotate around Y"
msgstr "繞Y軸旋轉"
#: src/libslic3r/PrintConfig.cpp:3066
msgid "Rotation angle around the Y axis in degrees."
msgstr "圍繞 Y 軸的旋轉角度 (以度爲單位)。"
#: src/libslic3r/PrintConfig.cpp:3071
msgid "Scaling factor or percentage."
msgstr "縮放因子或百分比。"
#: src/libslic3r/PrintConfig.cpp:3076
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr "檢測給定模型中未連接的部件, 並將其拆分爲單獨的對象。"
#: src/libslic3r/PrintConfig.cpp:3079
msgid "Scale to Fit"
msgstr "縮放到合適大小"
#: src/libslic3r/PrintConfig.cpp:3080
msgid "Scale to fit the given volume."
msgstr "縮放到適合於給定體積。"
#: src/libslic3r/PrintConfig.cpp:3089
msgid "Ignore non-existent config files"
msgstr "忽略不存在的配置文件"
#: src/libslic3r/PrintConfig.cpp:3090
msgid "Do not fail if a file supplied to --load does not exist."
msgstr "如果提供給—load 的文件不存在, 不要報錯。"
#: src/libslic3r/PrintConfig.cpp:3093
msgid "Load config file"
msgstr "加載配置文件"
#: src/libslic3r/PrintConfig.cpp:3094
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr "從指定文件加載配置。可多次使用以從多個文件中加載參數。"
#: src/libslic3r/PrintConfig.cpp:3097
msgid "Output File"
msgstr "輸出文件"
#: src/libslic3r/PrintConfig.cpp:3098
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr "輸出的文件（如果未指定，則將依據輸入文件）。"
#: src/libslic3r/PrintConfig.cpp:3108
msgid "Data directory"
msgstr "數據目錄"
#: src/libslic3r/PrintConfig.cpp:3109
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""
"在給定目錄中加載和存儲設置。這對於維護不同的配置文件或包括來自網絡存儲的配置"
"非常有用。"
#: src/libslic3r/PrintConfig.cpp:3112
msgid "Logging level"
msgstr "日誌級別"
#: src/libslic3r/PrintConfig.cpp:3113
msgid ""
"Messages with severity lower or eqal to the loglevel will be printed out. 0:"
"trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal"
msgstr ""
"嚴重級別較小於或等於日誌級別的消息將被列印出來。0: 跟蹤, 1: 調試, 2: 信息, "
"3: 警告, 4: 錯誤, 5: 致命"
#: src/libslic3r/GCode/PreviewData.cpp:176
msgid "Mixed"
msgstr "混合"
#: src/libslic3r/GCode/PreviewData.cpp:396
msgid "Height (mm)"
msgstr "高度（毫米）"
#: src/libslic3r/GCode/PreviewData.cpp:398
msgid "Width (mm)"
msgstr "寬度 (mm)"
#: src/libslic3r/GCode/PreviewData.cpp:400
msgid "Speed (mm/s)"
msgstr "回退速度(mm/s)"
#: src/libslic3r/GCode/PreviewData.cpp:402
msgid "Volumetric flow rate (mm3/s)"
msgstr "體積流量 (mm3/s)"
#: src/libslic3r/GCode/PreviewData.cpp:491
msgid "Default print color"
msgstr "默認列印顏色"
#: src/libslic3r/GCode/PreviewData.cpp:495
#, c-format
msgid "up to %.2f mm"
msgstr "高達 %.2f mm"
#: src/libslic3r/GCode/PreviewData.cpp:499
#, c-format
msgid "above %.2f mm"
msgstr "%.2f mm以上"
#: src/libslic3r/GCode/PreviewData.cpp:504
#, c-format
msgid "%.2f - %.2f mm"
msgstr "%.2f - %.2f mm"
#~ msgid "Top/bottom fill pattern"
#~ msgstr "頂部/底部填充樣式"
#~ msgid ""
#~ "Fill pattern for top/bottom infill. This only affects the external "
#~ "visible layer, and not its adjacent solid shells."
#~ msgstr ""
#~ "對頂部/底部內部填充的類型。這將影響外圍可見層，不影響其相鄰的可靠層。"
#~ msgid "Rotation angle around the Z axis in degrees (0-360, default: 0)."
#~ msgstr "繞Z軸旋轉角度（0-360，默認：0）。"
#~ msgid "Rotation angle around the X axis in degrees (0-360, default: 0)."
#~ msgstr "繞X軸旋轉角度（0-360，默認：0）。"
#~ msgid "Rotation angle around the Y axis in degrees (0-360, default: 0)."
#~ msgstr "繞Y軸旋轉角度（0-360，默認：0）。"
#~ msgid "Scaling factor (default: 1)."
#~ msgstr "縮放比例（默認：1）。"
#~ msgid "Minimum extrusion length"
#~ msgstr "最大擠出長度"
#~ msgid "API Key"
#~ msgstr "API密鑰"
#~ msgid ""
#~ "Slic3r can upload G-code files to OctoPrint. This field should contain "
#~ "the API Key required for authentication."
#~ msgstr ""
#~ "Slic3r可以把G代碼文件上傳至Octoprint。此字段應包含API密鑰，用於身份驗證。"
#~ msgid "Host or IP"
#~ msgstr "主機名或IP"
#~ msgid ""
#~ "Slic3r can upload G-code files to OctoPrint. This field should contain "
#~ "the hostname or IP address of the OctoPrint instance."
#~ msgstr ""
#~ "Slic3r可以把G代碼文件上傳至Octoprint。此字段應包含OctoPrint實例的主機名稱"
#~ "或IP地址。"
#~ msgid "Has heated bed"
#~ msgstr "有熱牀"
#~ msgid ""
#~ "Unselecting this will suppress automatic generation of bed heating gcode."
#~ msgstr "不勾選此項將不自動生成機牀加熱的G代碼。"
#~ msgid "Bed temperature for layers after the first one."
#~ msgstr "第一層之後的機牀溫度。"
#~ msgid "Bottom infill pattern"
#~ msgstr "底部填充樣式"
#~ msgid ""
#~ "Infill pattern for bottom layers. This only affects the external visible "
#~ "layer, and not its adjacent solid shells."
#~ msgstr "底層的填充樣式。此項僅影響外部可見層，不影響其相鄰的可靠層。"
#~ msgid "Speed > Acceleration"
#~ msgstr "速度 > 加速度"
#~ msgid "Brim connections width"
#~ msgstr "裙邊連接寬度"
#~ msgid ""
#~ "If set to a positive value, straight connections will be built on the "
#~ "first layer between adjacent objects."
#~ msgstr "如果設爲正值，第一層相鄰的物體間將建立直接連接。"
#~ msgid "Exterior brim width"
#~ msgstr "外圍裙邊寬度"
#~ msgid ""
#~ "This disables the fan completely for the first N layers to aid in the "
#~ "adhesion of media to the bed. (default 3)"
#~ msgstr "此項在打印前N層時完全禁用風扇，以幫助材料更好地黏合熱牀。(默認3)"
#~ msgid "↳ external"
#~ msgstr "↳外部的"
#~ msgid "External perimeters extrusion width"
#~ msgstr "外圍輪廓擠出寬度"
#~ msgid ""
#~ "Set this to a non-zero value to set a manual extrusion width for external "
#~ "perimeters. If auto is chosen, a value will be used that maximizes "
#~ "accuracy of the external visible surfaces. If expressed as percentage "
#~ "(for example 200%) it will be computed over layer height."
#~ msgstr ""
#~ "該值若非0，意爲外圍輪廓的手動擠出寬度。如果選擇自動，將使用一個使得外圍可"
#~ "見層精度最高的值。如果表示爲百分數（如200%），則該值以層高爲基準。"
#~ msgid "External perimeters speed"
#~ msgstr "外圍輪廓速度"
#~ msgid ""
#~ "This separate setting will affect the speed of external perimeters (the "
#~ "visible ones). If expressed as percentage (for example: 80%) it will be "
#~ "calculated on the perimeters speed setting above."
#~ msgstr ""
#~ "該參數將影響外圍可見層的打印速度。如果表示爲百分數（如80%），數值將以上面"
#~ "設置的外圍速度參數爲基準。"
#~ msgid "Add more perimeters when needed for avoiding gaps in sloping walls."
#~ msgstr "爲避免在打印傾斜的外牆中產生間隙，有必要時增加更多的輪廓。"
#~ msgid ""
#~ "The extruder to use (unless more specific extruder settings are "
#~ "specified)."
#~ msgstr "使用的擠出頭（除非指明瞭更多詳細的擠出頭參數）。"
#~ msgid ""
#~ "Set this to a non-zero value to set a manual extrusion width. If "
#~ "expressed as percentage (for example: 230%) it will be computed over "
#~ "layer height."
#~ msgstr ""
#~ "該值若爲非0，則代表手動擠出寬度。如果設爲百分數（如230%），則值是以層高爲"
#~ "基準。"
#~ msgid "Fill gaps"
#~ msgstr "填充間隙"
#~ msgid ""
#~ "If this is enabled, gaps will be filled with single passes. Enable this "
#~ "for better quality, disable it for shorter printing times."
#~ msgstr ""
#~ "如果勾選該項，間隙將被單通道填充。啓用該項可優化打印質量，禁用則可以節省時"
#~ "間。"
#~ msgid ""
#~ "Set this to a non-zero value to set a manual extrusion width for first "
#~ "layer. You can use this to force fatter extrudates for better adhesion. "
#~ "If expressed as percentage (for example 120%) it will be computed over "
#~ "first layer height."
#~ msgstr ""
#~ "若爲非0，則表示首層手動擠出寬度。可用於強制更寬的擠出量便於黏着。如果表示"
#~ "爲百分數（如120%），則該值是相對於首層高度。"
#~ msgid "↳ gaps"
#~ msgstr "↳ 間隙"
#~ msgid ""
#~ "Speed for filling gaps. Since these are usually single lines you might "
#~ "want to use a low speed for better sticking. If expressed as percentage "
#~ "(for example: 80%) it will be calculated on the infill speed setting "
#~ "above."
#~ msgstr ""
#~ "填充間隙的速度。由於這些通常是獨立的直線，所以儘量使用低速來保證黏着。如果"
#~ "表示爲百分數（如80%），則以上面設置的填充速度爲基準。"
#~ msgid "Use native G-code arcs"
#~ msgstr "使用本地的G代碼弧線"
#~ msgid ""
#~ "This experimental feature tries to detect arcs from segments and "
#~ "generates G2/G3 arc commands instead of multiple straight G1 commands."
#~ msgstr ""
#~ "這個試驗性能嘗試從段中偵測出弧線，生成 G2/G3 弧線指令，而不是生成多個G1直"
#~ "線指令。"
#~ msgid ""
#~ "Set this to a non-zero value to set a manual extrusion width for infill. "
#~ "You may want to use fatter extrudates to speed up the infill and make "
#~ "your parts stronger. If expressed as percentage (for example 90%) it will "
#~ "be computed over layer height."
#~ msgstr ""
#~ "該值若爲非0，則表示填充的手動擠出寬度。可使用較寬的擠出來加速填充並使部件"
#~ "牢固。如果表示爲百分數（如90%），則該值以層高爲基準。"
#~ msgid "Speed for printing the internal fill."
#~ msgstr "打印內部填充的速度。"
#~ msgid "Interior brim width"
#~ msgstr "內部裙邊寬度"
#~ msgid ""
#~ "Horizontal width of the brim that will be printed inside object holes on "
#~ "the first layer."
#~ msgstr "第一層打印於物件孔洞內部的裙邊寬度。"
#~ msgid ""
#~ "During multi-extruder prints, this option will drop the temperature of "
#~ "the inactive extruders to prevent oozing. It will enable a tall skirt "
#~ "automatically and move extruders outside such skirt when changing "
#~ "temperatures."
#~ msgstr ""
#~ "在多擠出頭的打印過程中，該選項將降低非活躍擠出頭的溫度以避免滴垂現象。啓動"
#~ "它將自動使能一個高環邊，並在改變溫度時將擠出頭移除該環邊。"
#~ msgid "Overridable options"
#~ msgstr "可覆蓋的選項"
#~ msgid ""
#~ "Set this to a non-zero value to set a manual extrusion width for "
#~ "perimeters. You may want to use thinner extrudates to get more accurate "
#~ "surfaces. If expressed as percentage (for example 200%) it will be "
#~ "computed over layer height."
#~ msgstr ""
#~ "該值若非0，則表示輪廓的手動基礎寬度。可以使用更細的擠出寬度來獲得更精確的"
#~ "表面。如果表示爲百分數（如200%），則該值以層高爲基準。"
#~ msgid "Speed for perimeters (contours, aka vertical shells)."
#~ msgstr "輪廓的打印速度（輪廓，又名垂直外殼）。"
#~ msgid ""
#~ "If you want to process the output G-code through custom scripts, just "
#~ "list their absolute paths here. Separate multiple scripts on individual "
#~ "lines. Scripts will be passed the absolute path to the G-code file as the "
#~ "first argument, and they can access the Slic3r config settings by reading "
#~ "environment variables."
#~ msgstr ""
#~ "如果你想要通過自定義腳本來處理輸出G代碼，在這裏列出它們的絕對路徑即可。將"
#~ "多個腳本分行輸入。腳本的絕對路徑將被以第一個參數傳遞給G代碼文件，而且它們"
#~ "可以通過讀取環境變量來獲取Slic3r的配置參數。"
#~ msgid "Pressure advance"
#~ msgstr "壓力高級設置"
#~ msgid ""
#~ "When set to a non-zero value, this experimental option enables pressure "
#~ "regulation. It's the K constant for the advance algorithm that pushes "
#~ "more or less filament upon speed changes. It's useful for Bowden-tube "
#~ "extruders. Reasonable values are in range 0-10."
#~ msgstr ""
#~ "若爲非0，該試驗選項啓用壓力調節。該值爲一個高級算法的K常數。這個算法根據速"
#~ "度變化來改變推動絲料多少。適用於鮑登管擠出頭。合理的值範圍是0-10."
#~ msgid "Raft offset"
#~ msgstr "筏偏置"
#~ msgid "Horizontal margin between object base layer and raft contour."
#~ msgstr "物體基層和筏輪廓之間的水平距離。"
#~ msgid "Resolution (deprecated)"
#~ msgstr "精度(不贊成)"
#~ msgid ""
#~ "The speed for retractions (it only applies to the extruder motor). If you "
#~ "use the Firmware Retraction option, please note this value still affects "
#~ "the auto-speed pressure regulator."
#~ msgstr ""
#~ "回縮速度（僅適用於擠出頭電機）。如果試用了固件回縮選項，請注意該值仍影響自"
#~ "動速度電壓調節器。"
#~ msgid "↳ small"
#~ msgstr "↳ 小"
#~ msgid ""
#~ "This separate setting will affect the speed of perimeters having radius "
#~ "<= 6.5mm (usually holes). If expressed as percentage (for example: 80%) "
#~ "it will be calculated on the perimeters speed setting above."
#~ msgstr ""
#~ "該參數影響半徑 <= 6.5mm（通常是孔洞）的輪廓打印速度。如果表示爲百分比（如"
#~ "80%），則以上面設置的輪廓速度爲基準計算。"
#~ msgid "↳ solid"
#~ msgstr "↳ 可靠的"
#~ msgid ""
#~ "Set this to a non-zero value to set a manual extrusion width for infill "
#~ "for solid surfaces. If expressed as percentage (for example 90%) it will "
#~ "be computed over layer height."
#~ msgstr ""
#~ "設爲非0值，則表示可靠表面填充的手動擠出寬度。若表示爲百分數（如90%），將以"
#~ "層高爲基準計算。"
#~ msgid ""
#~ "Speed for printing solid regions (top/bottom/internal horizontal shells). "
#~ "This can be expressed as a percentage (for example: 80%) over the default "
#~ "infill speed above."
#~ msgstr ""
#~ "打印可靠區域的速度（頂部的/底部的/內部水平外殼）。以百分數（如80%）表示，"
#~ "則以上述的默認填充速度爲基準計算。"
#~ msgid ""
#~ "Temperature difference to be applied when an extruder is not active. "
#~ "Enables a full-height \"sacrificial\" skirt on which the nozzles are "
#~ "periodically wiped."
#~ msgstr ""
#~ "當擠出頭處於非活躍狀態時用到的溫度差。啓用一個全高度的環邊，純用於定期給噴"
#~ "嘴擦拭。"
#~ msgid ""
#~ "This start procedure is inserted at the beginning, after bed has reached "
#~ "the target temperature and extruder just started heating, and before "
#~ "extruder has finished heating. If Slic3r detects M104, M109, M140 or M190 "
#~ "in your custom codes, such commands will not be prepended automatically "
#~ "so you're free to customize the order of heating commands and other "
#~ "custom actions. Note that you can use placeholder variables for all "
#~ "Slic3r settings, so you can put a \"M109 S[first_layer_temperature]\" "
#~ "command wherever you want."
#~ msgstr ""
#~ "該段代碼放在G代碼開頭，在熱牀達到目標溫度、擠出頭開始加熱後，擠出頭完成加"
#~ "熱前插入。如果其中不包含有M104, M109, M140 或 M190，這段指令就會在Slic3r自"
#~ "動放置的M指令之後；否則Slic3r將不會自動生成M指令，這樣你可以自由定義加熱命"
#~ "令和其他自定義動作的順序。注意可以使用佔位符變量替代所有Slic3r參數，所以你"
#~ "可以把一個“M109 S[ first_layer_temperature ]”命令放在任意處。"
#~ msgid "The extruder to use when printing support material, raft and skirt."
#~ msgstr "打印支撐材料、筏和環邊時使用的擠出頭。"
#~ msgid ""
#~ "Set this to a non-zero value to set a manual extrusion width for support "
#~ "material. If expressed as percentage (for example 90%) it will be "
#~ "computed over layer height."
#~ msgstr ""
#~ "設爲非0值，表示對支撐材料的手動擠出寬度。如果表示爲百分數（如90%），則以層"
#~ "高爲基準計算。"
#~ msgid ""
#~ "The extruder to use when printing support material interface. This "
#~ "affects raft too."
#~ msgstr "打印支撐材料表面時使用的擠出頭。也影響筏。"
#~ msgid "↳ interface"
#~ msgstr "↳ 表面"
#~ msgid "Interface Speed"
#~ msgstr "表面速度"
#~ msgid "Support material interface speed"
#~ msgstr "支撐材料表面速度"
# "% o“ format mistake?
#~ msgid ""
#~ "Support material will not be generated for overhangs whose slope angle "
#~ "(90° = vertical) is above the given threshold. In other words, this value "
#~ "represent the most horizontal slope (measured from the horizontal plane) "
#~ "that you can print without support material. Set to a percentage to "
#~ "automatically detect based on some % of overhanging perimeter width "
#~ "instead (recommended)."
#~ msgstr ""
#~ "對於傾斜度（90° = 垂直）高於指定閾值的懸空部位，不生成相應的支撐材料。換句"
#~ "話說，該值表示不用支撐材料所能打印的最水平的角度。設爲百分數，則以懸空輪廓"
#~ "寬度的 % o自動計算（推薦）。"
#~ msgid "↳ top solid"
#~ msgstr "↳ 頂部可靠層"
#~ msgid ""
#~ "Set this to a non-zero value to set a manual extrusion width for infill "
#~ "for top surfaces. You may want to use thinner extrudates to fill all "
#~ "narrow regions and get a smoother finish. If expressed as percentage (for "
#~ "example 90%) it will be computed over layer height."
#~ msgstr ""
#~ "設爲非0值，表示頂層表面填充的手動擠出寬度。可以使用較細的擠出寬度來對所有"
#~ "的狹長區域進行填充並獲得較光滑的尾部。如果表示爲百分數（如90%），則以層高"
#~ "爲基準計算。"
#~ msgid ""
#~ "Infill pattern for top layers. This only affects the external visible "
#~ "layer, and not its adjacent solid shells."
#~ msgstr "頂層填充樣式。僅影響外部可見層，不影響其相鄰可靠層。"
#~ msgid ""
#~ "Speed for printing top solid layers (it only applies to the uppermost "
#~ "external layers and not to their internal solid layers). You may want to "
#~ "slow down this to get a nicer surface finish. This can be expressed as a "
#~ "percentage (for example: 80%) over the solid infill speed above."
#~ msgstr ""
#~ "打印頂部可靠層的速度（僅適用於最外部的頂層，而非它們的內部可靠填充層）。可"
#~ "降低該速度值以獲得較好的表面尾處理。若表示爲百分數（如80%），則以可靠填充"
#~ "速度爲基準計算。"
#~ msgid "Vibration limit (deprecated)"
#~ msgstr "振動限制(贊成)"
#~ msgid ""
#~ "This experimental option will slow down those moves hitting the "
#~ "configured frequency limit. The purpose of limiting vibrations is to "
#~ "avoid mechanical resonance. Set zero to disable."
#~ msgstr ""
#~ "該試驗選項將減緩達到指定頻率值的打印動作。目的爲避免機械共振。設爲0以禁"
#~ "用。"
#~ msgid "Z full steps/mm"
#~ msgstr "Z全部步數/毫米"
#~ msgid ""
#~ "Set this to the number of *full* steps (not microsteps) needed for moving "
#~ "the Z axis by 1mm; you can calculate this by dividing the number of "
#~ "microsteps configured in your firmware by the microstepping amount (8, "
#~ "16, 32). Slic3r will round your configured layer height to the nearest "
#~ "multiple of that value in order to ensure the best accuracy. This is most "
#~ "useful for machines with imperial leadscrews or belt-driven Z or for "
#~ "unusual layer heights with metric leadscrews. Set to zero to disable this "
#~ "experimental feature."
#~ msgstr ""
#~ "將該值設爲移動Z軸1毫米所需的*全部*步數（而不是細分）；可以這樣計算：把固件"
#~ "中已配置的細分數除以倍增係數（8，16，32）。Sli3r會把你設置的層高四捨五入到"
#~ "該值的最近倍數以確保精度。此項設置對於使用英制絲槓、皮帶傳動Z軸的機器，或"
#~ "者機器使用公制絲槓且層高值特別時比較適用。設爲0以禁用該功能。"
#~ msgid "Cut model in the XY plane into tiles of the specified max size."
#~ msgstr "將XY面的模型切割成指定最大尺寸的小塊。"
# POV-Ray?
#~ msgid "Export the model as POV-Ray definition."
#~ msgstr ""
#~ "將模型以POV-Ray定義導出。（參見開源射線描跡軟件：http://www.povray."
#~ "org/）。"
#~ msgid "Slice the model and export slices as SVG."
#~ msgstr "切割模型並以SVG格式導出切片結果。"
Reference in New Issue Copy Permalink