PrusaSlicer-NonPlainar/xs/src/slic3r/GUI/WipeTowerDialog.cpp

#include <algorithm>
#include <sstream>
#include "WipeTowerDialog.hpp"

#include <wx/sizer.h>

//! macro used to mark string used at localization,
//! return same string
#define L(s) s



RammingDialog::RammingDialog(wxWindow* parent,const std::string& parameters)
: wxDialog(parent, -1,  wxT("Ramming customization"), wxPoint(50,50), wxSize(800,550), wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER)
{
    this->Centre();
    m_panel_ramming  = new RammingPanel(this,parameters);
    m_panel_ramming->Show(true);
    this->Show();

    auto main_sizer = new wxBoxSizer(wxVERTICAL);
    main_sizer->Add(m_panel_ramming, 1, wxEXPAND);
    main_sizer->Add(CreateButtonSizer(wxOK | wxCANCEL), 0, wxALIGN_CENTER_HORIZONTAL | wxBOTTOM, 10);
    SetSizer(main_sizer);
    SetMinSize(GetSize());
    main_sizer->SetSizeHints(this);

    this->Bind(wxEVT_CLOSE_WINDOW, [this](wxCloseEvent& e) { EndModal(wxCANCEL); });

    this->Bind(wxEVT_BUTTON,[this](wxCommandEvent&) {
        m_output_data = m_panel_ramming->get_parameters();
        EndModal(wxID_OK);
        },wxID_OK);
}





RammingPanel::RammingPanel(wxWindow* parent, const std::string& parameters)
: wxPanel(parent,wxID_ANY,wxPoint(50,50), wxSize(800,350),wxBORDER_RAISED)
{
    new wxStaticText(this,wxID_ANY,wxString("Total ramming time (s):"),     wxPoint(500,105),      wxSize(200,25),wxALIGN_LEFT);
    m_widget_time = new wxSpinCtrlDouble(this,wxID_ANY,wxEmptyString,       wxPoint(700,100),      wxSize(75,25),wxSP_ARROW_KEYS|wxALIGN_RIGHT,0.,5.0,3.,0.5);        
    new wxStaticText(this,wxID_ANY,wxString("Total rammed volume (mm\u00B3):"),  wxPoint(500,135),      wxSize(200,25),wxALIGN_LEFT);
    m_widget_volume = new wxSpinCtrl(this,wxID_ANY,wxEmptyString,           wxPoint(700,130),      wxSize(75,25),wxSP_ARROW_KEYS|wxALIGN_RIGHT,0,10000,0);        
    new wxStaticText(this,wxID_ANY,wxString("Ramming line width (%):"),     wxPoint(500,205),      wxSize(200,25),wxALIGN_LEFT);
    m_widget_ramming_line_width_multiplicator = new wxSpinCtrl(this,wxID_ANY,wxEmptyString,       wxPoint(700,200),      wxSize(75,25),wxSP_ARROW_KEYS|wxALIGN_RIGHT,10,200,100);        
    new wxStaticText(this,wxID_ANY,wxString("Ramming line spacing (%):"),   wxPoint(500,235),      wxSize(200,25),wxALIGN_LEFT);
    m_widget_ramming_step_multiplicator = new wxSpinCtrl(this,wxID_ANY,wxEmptyString,     wxPoint(700,230),      wxSize(75,25),wxSP_ARROW_KEYS|wxALIGN_RIGHT,10,200,100);        
    
    std::stringstream stream{parameters};
    stream >> m_ramming_line_width_multiplicator >> m_ramming_step_multiplicator;
    int ramming_speed_size = 0;
    float dummy = 0.f;
    while (stream >> dummy)
        ++ramming_speed_size;
    stream.clear();
    stream.get();    
    
    std::vector<std::pair<float,float>> buttons;
    float x = 0.f;
    float y = 0.f;
    while (stream >> x >> y)
        buttons.push_back(std::make_pair(x,y));        
    
    m_chart = new Chart(this,wxRect(10,10,480,360),buttons,ramming_speed_size,0.25f);
    
    m_widget_time->SetValue(m_chart->get_time());
    m_widget_time->SetDigits(2);
    m_widget_volume->SetValue(m_chart->get_volume());
    m_widget_volume->Disable();
    m_widget_ramming_line_width_multiplicator->SetValue(m_ramming_line_width_multiplicator);
    m_widget_ramming_step_multiplicator->SetValue(m_ramming_step_multiplicator);        
    
    m_widget_ramming_step_multiplicator->Bind(wxEVT_TEXT,[this](wxCommandEvent&) { line_parameters_changed(); });
    m_widget_ramming_line_width_multiplicator->Bind(wxEVT_TEXT,[this](wxCommandEvent&) { line_parameters_changed(); });
    m_widget_time->Bind(wxEVT_TEXT,[this](wxCommandEvent&) {m_chart->set_xy_range(m_widget_time->GetValue(),-1);});
    m_widget_time->Bind(wxEVT_CHAR,[](wxKeyEvent&){});      // do nothing - prevents the user to change the value
    m_widget_volume->Bind(wxEVT_CHAR,[](wxKeyEvent&){});    // do nothing - prevents the user to change the value   
    Bind(EVT_WIPE_TOWER_CHART_CHANGED,[this](wxCommandEvent&) {m_widget_volume->SetValue(m_chart->get_volume()); m_widget_time->SetValue(m_chart->get_time());} );
    Refresh(this);
}

void RammingPanel::line_parameters_changed() {
    m_ramming_line_width_multiplicator = m_widget_ramming_line_width_multiplicator->GetValue();
    m_ramming_step_multiplicator = m_widget_ramming_step_multiplicator->GetValue();
}

std::string RammingPanel::get_parameters()
{
    std::vector<float> speeds = m_chart->get_ramming_speed(0.25f);
    std::vector<std::pair<float,float>> buttons = m_chart->get_buttons();
    std::stringstream stream;
    stream << m_ramming_line_width_multiplicator << " " << m_ramming_step_multiplicator;
    for (const float& speed_value : speeds)
        stream << " " << speed_value;
    stream << "|";    
    for (const auto& button : buttons)
        stream << " " << button.first << " " << button.second;
    return stream.str();
}



// Parent dialog for purging volume adjustments - it fathers WipingPanel widget (that contains all controls) and a button to toggle simple/advanced mode:
WipingDialog::WipingDialog(wxWindow* parent,const std::vector<float>& matrix, const std::vector<float>& extruders)
: wxDialog(parent, -1,  wxT(L("Wipe tower - Purging volume adjustment")), wxPoint(50,50), wxSize(800,550), wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER)
{
    this->Centre();

    auto widget_button = new wxButton(this,wxID_ANY,"-",wxPoint(0,0),wxDefaultSize);
    m_panel_wiping  = new WipingPanel(this,matrix,extruders, widget_button);

    auto main_sizer = new wxBoxSizer(wxVERTICAL);
    main_sizer->Add(m_panel_wiping, 1, wxEXPAND);


    main_sizer->Add(widget_button,0,wxALIGN_CENTER_HORIZONTAL|wxCENTER,10);
    main_sizer->Add(CreateButtonSizer(wxOK | wxCANCEL), 0, wxALIGN_CENTER_HORIZONTAL | wxBOTTOM, 10);
    SetSizer(main_sizer);
    SetMinSize(GetSize());
    main_sizer->SetSizeHints(this);

    this->Bind(wxEVT_CLOSE_WINDOW, [this](wxCloseEvent& e) { EndModal(wxCANCEL); });
    
    this->Bind(wxEVT_BUTTON,[this](wxCommandEvent&) {                 // if OK button is clicked..
        m_output_matrix    = m_panel_wiping->read_matrix_values();    // ..query wiping panel and save returned values
        m_output_extruders = m_panel_wiping->read_extruders_values(); // so they can be recovered later by calling get_...()
        EndModal(wxID_OK);
        },wxID_OK);

    this->Show();
}



// This panel contains all control widgets for both simple and advanced mode (these reside in separate sizers)
WipingPanel::WipingPanel(wxWindow* parent, const std::vector<float>& matrix, const std::vector<float>& extruders, wxButton* widget_button)
: wxPanel(parent,wxID_ANY,wxPoint(50,50), wxSize(500,350),wxBORDER_RAISED)
{
    m_widget_button = widget_button;    // pointer to the button in parent dialog
    m_widget_button->Bind(wxEVT_BUTTON,[this](wxCommandEvent&){ toggle_advanced(true); });

    m_number_of_extruders = (int)(sqrt(matrix.size())+0.001);

    m_sizer_simple          = new wxBoxSizer(wxVERTICAL);
    m_sizer_advanced        = new wxBoxSizer(wxVERTICAL);
    auto gridsizer_simple   = new wxGridSizer(3,10,10);
    auto gridsizer_advanced = new wxGridSizer(m_number_of_extruders+1,10,10);


    // First create controls for simple mode and assign them to m_sizer_simple:
    m_sizer_simple->Add(new wxStaticText(this,wxID_ANY,wxString(L("Total purging volume is calculated by summing two values below, depending on which tools are loaded/unloaded.")),wxPoint(40,25), wxSize(450,35)),-1,wxEXPAND,10);
    m_sizer_simple->Add(new wxStaticText(this,wxID_ANY,wxString(L("Volume to purge (mm\u00B3) when the filament is being")),wxPoint(40,85) ,/*wxSize(500,25)*/wxDefaultSize,wxALIGN_LEFT),-1,wxEXPAND|wxALIGN_CENTER,10);

    gridsizer_simple->Add(0,-1,wxALL,10);
    gridsizer_simple->Add(new wxStaticText(this,wxID_ANY,wxString(L("unloaded")),wxPoint(110,105) ,/*wxSize(80,25)*/wxDefaultSize,wxALIGN_CENTER),-1,wxALIGN_CENTER,10);
    gridsizer_simple->Add(new wxStaticText(this,wxID_ANY,wxString(L("loaded")),wxPoint(195,105) ,/*wxSize(80,25)*/wxDefaultSize,wxALIGN_CENTER),-1,wxALIGN_CENTER,10);

    for (unsigned int i=0;i<m_number_of_extruders;++i) {
        m_old.push_back(new wxSpinCtrl(this,wxID_ANY,wxEmptyString,wxPoint(120,130+30*i),/*wxSize(50,25)*/wxDefaultSize,wxSP_ARROW_KEYS|wxALIGN_RIGHT,0,300,extruders[2*i]));
        m_new.push_back(new wxSpinCtrl(this,wxID_ANY,wxEmptyString,wxPoint(195,130+30*i),/*wxSize(50,25)*/wxDefaultSize,wxSP_ARROW_KEYS|wxALIGN_RIGHT,0,300,extruders[2*i+1]));
        gridsizer_simple->Add(new wxStaticText(this,wxID_ANY,wxString(L("Tool #"))<<i+1<<": ",wxPoint(20,135+30*i) ,/*wxSize(75,25)*/wxDefaultSize,wxALIGN_LEFT),-1,wxALL,10);
        gridsizer_simple->Add(m_old.back(),-1,wxALIGN_CENTER,10);
        gridsizer_simple->Add(m_new.back(),-1,wxALIGN_CENTER,10);
    }

    // Now the same for advanced mode:
    wxPoint origin(50,85);
    m_sizer_advanced->Add(new wxStaticText(this,wxID_ANY,wxString(L("Here you can adjust required purging volume (mm\u00B3) for any given pair of tools.")),wxPoint(40,25) ,/*wxSize(500,35)*/wxDefaultSize),-1,wxALL,10);
    m_sizer_advanced->Add(new wxStaticText(this,wxID_ANY,wxString(L("Filament changed to")),origin+wxPoint(75,0) ,/*wxSize(500,25)*/wxDefaultSize),-1,wxALL,10);

    for (unsigned int i=0;i<m_number_of_extruders;++i) {
        edit_boxes.push_back(std::vector<wxTextCtrl*>(0));

        for (unsigned int j=0;j<m_number_of_extruders;++j) {
            edit_boxes.back().push_back(new wxTextCtrl(this,wxID_ANY,wxEmptyString,origin+wxPoint(25+60*i,45+30*j),/*wxSize(50,25)*/wxDefaultSize));
            if (i==j)
                edit_boxes[i][j]->Disable();
            else
                edit_boxes[i][j]->SetValue(wxString("")<<int(matrix[m_number_of_extruders*j+i]));
        }
    }

    gridsizer_advanced->Add(0,-1,wxALL,10);
    for (unsigned int i=0;i<m_number_of_extruders;++i)
        gridsizer_advanced->Add(new wxStaticText(this,wxID_ANY,wxString("")<<i+1,origin+wxPoint(45+60*i,25) ,/*wxSize(20,25)*/wxDefaultSize),-1,wxALL,10);
    for (unsigned int i=0;i<m_number_of_extruders;++i) {
        gridsizer_advanced->Add(new wxStaticText(this,wxID_ANY,wxString("")<<i+1,origin+wxPoint(0,50+30*i) ,/*wxSize(500,25)*/wxDefaultSize),-1,wxALL,10);
        for (unsigned int j=0;j<m_number_of_extruders;++j)
            gridsizer_advanced->Add(edit_boxes[j][i],-1,wxALL,10);
    }


    m_sizer_simple->Add(gridsizer_simple,-1,wxALL,10);
    m_sizer_advanced->Add(gridsizer_advanced,-1,wxALL,10);
    toggle_advanced(); // to show/hide what is appropriate
}




// Reads values from the (advanced) wiping matrix:
std::vector<float> WipingPanel::read_matrix_values() {
    if (!m_advanced)
        fill_in_matrix();
    std::vector<float> output;
    for (unsigned int i=0;i<m_number_of_extruders;++i) {
        for (unsigned int j=0;j<m_number_of_extruders;++j) {
            double val = 0.;
            edit_boxes[j][i]->GetValue().ToDouble(&val);
            output.push_back((float)val);
        }
    }
    return output;
}

// Reads values from simple mode to save them for next time:
std::vector<float> WipingPanel::read_extruders_values() {
    std::vector<float> output;
    for (unsigned int i=0;i<m_number_of_extruders;++i) {
        output.push_back(m_old[i]->GetValue());
        output.push_back(m_new[i]->GetValue());
    }
    return output;
}

// This updates the "advanced" matrix based on values from "simple" mode
void WipingPanel::fill_in_matrix() {
    for (unsigned i=0;i<m_number_of_extruders;++i) {
        for (unsigned j=0;j<m_number_of_extruders;++j) {
            if (i==j) continue;
                edit_boxes[j][i]->SetValue(wxString("")<< (m_old[i]->GetValue() + m_new[j]->GetValue()));
        }
    }
}



// Function to check if simple and advanced settings are matching
bool WipingPanel::advanced_matches_simple() {
    for (unsigned i=0;i<m_number_of_extruders;++i) {
        for (unsigned j=0;j<m_number_of_extruders;++j) {
            if (i==j) continue;
            if (edit_boxes[j][i]->GetValue() != (wxString("")<< (m_old[i]->GetValue() + m_new[j]->GetValue())))
                return false;
        }
    }
    return true;
}


// Switches the dialog from simple to advanced mode and vice versa
void WipingPanel::toggle_advanced(bool user_action) {
    if (m_advanced && !advanced_matches_simple() && user_action) {
        if (wxMessageDialog(this,wxString(L("Switching to simple settings will discard changes done in the advanced mode!\n\nDo you want to proceed?")),
                            wxString(L("Warning")),wxYES_NO|wxICON_EXCLAMATION).ShowModal() != wxID_YES)
            return;
    }
    if (user_action)
        m_advanced = !m_advanced;                // user demands a change -> toggle
    else {
        m_advanced = !advanced_matches_simple(); // if called from constructor, show what is appropriate
        (m_advanced ? m_sizer_advanced : m_sizer_simple)->SetSizeHints(this);
        SetSizer(m_advanced ? m_sizer_advanced : m_sizer_simple);
    }

   m_sizer_simple->Show(!m_advanced);
   m_sizer_advanced->Show(m_advanced);

    m_widget_button->SetLabel(m_advanced ? L("Show simplified settings") : L("Show advanced settings"));
    if (m_advanced)
        if (user_action) fill_in_matrix();  // otherwise keep values loaded from config

    this->Refresh();
}