PrusaSlicer-NonPlainar/resources/profiles/PrusaResearch.idx

min_slic3r_version = 1.41.0-alpha
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
0.2.0-alpha7 Fixed the *MK3* references
0.2.0-alpha6
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
min_slic3r_version = 1.40.0
0.1.11 fw version changed to 3.3.1
0.1.10 MK3 jerk and acceleration update
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
0.1.6 Split the MK2.5 profile from the MK2S
min_slic3r_version = 1.40.0-beta
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
0.1.4 edited fw version, added z-raise after print
min_slic3r_version = 1.40.0-alpha
0.1.3 Fixed an incorrect position of the max_print_height parameter
0.1.2 Wipe tower changes
0.1.1 Minor print speed adjustments
0.1.0 Initial
For the Marlin firmware, the machine envelope G-code is emitted based on the Slic3r printer profile. Also the bundled config has been updated, so that the machine envelope G-code values were removed and the new Slic3r printer profile values were updated with the former G-code values. Slic3r version has been bumped up to 1.41.0-alpha for the configuration files to work. 2018-07-17 17:37:24 +00:00			`min_slic3r_version = 1.41.0-alpha`
T1 and M702 C are now evaluated by the time estimator to add the new "filament_load_time" and "filament_unload_time" values to match the MK3 MMU2 behavior. Emitting of the remaining times into the output G-code was made optional through a new "remaining_times" configuration value, so the firmware flavors and versions, which do not know the M73 code, will not complain. Configuration changes: The wipe tower default position was shifted inwards after the wipe tower coordinate reference point was changed from the center to the left front corner. Added the "filament_load_time" and "filament_unload_time" values to the MK3 MMU filament profiles. Enabled "remaining_times" for the MK2.5, MK3 and MK3MMU2 printers. 2018-08-04 15:38:25 +00:00			`0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.`
Fixed the MK3 references in Prusa3D profiles 2018-08-02 11:09:53 +00:00			`0.2.0-alpha7 Fixed the MK3 references`
			`0.2.0-alpha6`
Configuration improvements: Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2 2018-08-02 07:11:11 +00:00			`0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2`
Added the alpha4 config to the index. 2018-07-27 21:28:59 +00:00			`0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.`
			`0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost`
PrusaResearch.idx: Comment 0.2.0-alpha2 2018-07-24 13:53:17 +00:00			`0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material`
Sync PrusaResearch.idx 2018-07-24 13:47:13 +00:00			`0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0`
			`0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters`
Updated slic3r_min_version in prusa3d config version index. 2018-06-12 09:46:15 +00:00			`min_slic3r_version = 1.40.0`
Sync PrusaResearch.idx 2018-07-24 13:47:13 +00:00			`0.1.11 fw version changed to 3.3.1`
			`0.1.10 MK3 jerk and acceleration update`
			`0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles`
			`0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes`
			`0.1.7 Fixed errors in 0.25mm and 0.6mm profiles`
Split the MK2.5 profile from the MK2S 2018-06-11 16:20:29 +00:00			`0.1.6 Split the MK2.5 profile from the MK2S`
Updated slic3r_min_version in prusa3d config version index. 2018-06-12 09:46:15 +00:00			`min_slic3r_version = 1.40.0-beta`
Fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles. 2018-06-05 08:11:28 +00:00			`0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles`
Added Prusa profiles from https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch 2018-06-04 13:58:44 +00:00			`0.1.4 edited fw version, added z-raise after print`
Updated slic3r_min_version in prusa3d config version index. 2018-06-12 09:46:15 +00:00			`min_slic3r_version = 1.40.0-alpha`
Bumped up version numbers of the PrusaResearch.ini and the Slic3r itself. 2018-05-22 13:18:38 +00:00			`0.1.3 Fixed an incorrect position of the max_print_height parameter`
Updated PrusaResearch.ini with the latest version from Slic3r-settings repository 2018-05-11 13:41:26 +00:00			`0.1.2 Wipe tower changes`
			`0.1.1 Minor print speed adjustments`
Update PrusaResearch bundle & index 2018-04-25 14:42:33 +00:00			`0.1.0 Initial`