'*--filament-diameter[specify raw filament diameter]:raw filament diameter in mm' \
'*--extrusion-multiplier[specify multiplier for amount of plastic extruded]:extrusion multiplier' \
'*--temperature[specify extrusion temperature]:extrusion temperature in Celsius' \
'*--first-layer-temperature[specify extrusion temperature for the first layer]:first layer extrusion temperature in Celsius' \
'--bed-temperature[specify heated bed temperature]:heated bed temperature in Celsius' \
'--first-layer-bed-temperature[specify heated bed temperature for the first layer]:first layer heated bed temperature in Celsius' \
\
'--perimeter-extruder[specify extruder to use for printing perimeters]:extruder number' \
'--infill-extruder[specify extruder to use for printing infill]:extruder number' \
'--support-material-extruder[specify extruder to use for printing support material]:extruder number' \
\
'--travel-speed[specify speed of non-print moves]:speed of non-print moves in mm/s' \
'--perimeter-speed[specify speed of print moves for perimeters]:speed of print moves for perimeters in mm/s' \
'--external-perimeter-speed[specify speed of print moves for external perimeters]:speed of print moves for external perimeters in mm/s or % of --perimeter-speed' \
'--small-perimeter-speed[specify speed of print moves for small perimeters]:speed of print moves for small perimeters in mm/s or % of --perimeter-speed' \
'--infill-speed[specify speed of infill print moves]:speed of infill print moves in mm/s' \
'--solid-infill-speed[specify speed of solid surface print moves]:speed of solid surface print moves in mm/s or % of --infill-speed' \
'--top-solid-infill-speed[specify speed of top surface print moves]:speed of top surface print moves in mm/s or % of --solid-infill-speed' \
'--bridge-speed[specify speed of bridge print moves]:speed of bridge print moves in mm/s' \
'--first-layer-speed[specify speed of bottom layer print moves]:speed of bottom layer print moves in mm/s or % of normal speeds' \
\
'--layer-height[specify layer height]:layer height in mm' \
'--first-layer-height[specify layer height for bottom layer]:layer height for bottom layer in mm or % of --layer-height' \
'--infill-every-layers[specify infill for every N layers]:N layers' \
\
'--perimeters[specify number of perimeters]:number of perimeters' \
'--solid-layers[specify number of solid layers to do for top/bottom surfaces]:number of layers for top/bottom surfaces' \
'--fill-density[specify infill density]:infill density in percent' \
'--fill-angle[specify infill angle]:infill angle in degrees' \
'--fill-pattern[specify pattern used for infill]:infill pattern:(rectilinear line concentric honeycomb hilbertcurve archimedeanchords octagramspiral)' \
'--solid-fill-pattern[specify pattern used for solid layers]:solid fill pattern:(rectilinear concentric hilbertcurve archimedeanchords octagramspiral)' \
'--start-gcode[load initial G-code from file]:start G-code file:_files -g "*.(#i)(gcode)(-.)"' \
'--end-gcode[load final G-code from file]:end G-code file:_files -g "*.(#i)(gcode)(-.)"' \
'--layer-gcode[load layer-change G-code from file]:layer-change G-code file:_files -g "*.(#i)(gcode)(-.)"' \
'(--support-material --no-support-material)'--{no-,}support-material'[disable/enable generation of support material for overhangs]' \
'--support-material-threshold[specify support material threshold]:maximum slope angle for generating support material' \
'--support-material-pattern[specify pattern used for support material]:support material pattern:(rectilinear honeycomb)' \
'--support-material-spacing[specify spacing between support material lines]:spacing between support material lines in mm' \
'--support-material-angle[specify support material angle]:support material angle in degrees' \
'(--randomize-start --no-randomize-start)'--{no-,}randomize-start'[disable/enable randomization of starting point across layers]' \
'(--extra-perimeters --no-extra-perimeters)'--{no-,}extra-perimeters'[disable/enable generation of extra perimeters when needed]' \
\
'--retract-length[specify filament retraction length when pausing extrusion]:filament retraction length in mm' \
'--retract-speed[specify filament retraction speed]:filament retraction speed in mm/s' \
'--retract-restart-extra[specify filament length to extrude for compensating retraction]: filament lenght in mm' \
'--retract-before-travel[specify minimum travel length for activating retraction]:minimum travel length for activating retraction in mm' \
'--retract-lift[specify Z-axis lift for use when retracting]:Z-axis lift in mm' \
\
'(--cooling --no-cooling)'--{no-,}cooling'[disable/enable fan and cooling control]' \
'--min-fan-speed[specify minimum fan speed]:minimum fan speed in percent' \
'--max-fan-speed[specify maximum fan speed]:maximum fan speed in percent' \
'--bridge-fan-speed[specify fan speed to use for bridging]:bridging fan speed in percent' \
'--fan-below-layer-time[specify maximum layer print time before activating fan]:maximum layer print time in seconds' \
'--slowdown-below-layer-time[specify maximum layer print time before slowing down printing]:maximum layer print time in seconds' \
'--min-print-speed[specify minimum print speed]:minimum print speed in mm/s' \
'--disable-fan-first-layers[specify number of bottom layers to print before activating fan]:number of bottom layers' \
'(--fan-always-on --no-fan-always-on)'--{no-,}fan-always-on'[disable/enable deactivation of fan]' \
\
'--skirts[specify number of skirts]:number of skirts' \
'--skirt-distance[specify distance between innermost skirt and object]:distance between innermost skirt and object in mm' \
'--skirt-height[specify number of skirt layers]:number of skirt layers' \
'--brim-width[specify brim width]:width of brim in mm' \
\
'--scale[specify object scaling factor]:object scaling factor in percent' \
'--rotate[specify object rotation angle]:object rotation angle in degrees' \
'(--duplicate-grid)--duplicate[specify number of duplicates for auto-arrange]:number of duplicates for auto-arrange' \
'(--duplicate-grid)--bed-size[specify bed size for auto-arrange]:bed size for auto-arrange in mm,mm' \
'(--duplicate --bed-size)--duplicate-grid[specify number of duplicates for grid arrangement]:number of duplicates for grid arrangement as x,y' \
'--duplicate-distance[specify distance between duplicates]:distance between duplicates in mm' \
\
'(--complete-objects --no-complete-objects)'--{no-,}complete-objects'[disable/enable completion of each object before starting a new one]' \
'--extruder-clearance-radius[specify radius above which extruder will not collide with anything]:radius in mm' \
'--extruder-clearance-height[specify maximum vertical extruder depth]:maximum vertical extruder depth in mm' \
\
'--notes[specify notes to be added as comments to the output file]:notes' \
\
'--extrusion-width[specify extrusion width]:extrusion width in mm or % of --layer-height' \
'--first-layer-extrusion-width[specify extrusion width for first layer]:first layer extrusion width in mm or % og --layer-height' \
'--perimeters-extrusion-width[specify extrusion width for perimeters]:perimeter extrusion width in mm or % of --layer-height' \
'--infill-extrusion-width[specify extrusion width for infill]:infill extrusion width in mm or % of --layer-height' \
'--support-material-extrusion-width[specify extrusion width for support material]:support material extrusion width in mm or % of --layer-height' \
'--bridge-flow-ratio[specify multiplier for extrusion when bridging]:bridge extrusion multiplier' \
