PrusaSlicer-NonPlainar/xs/src/slic3r/GUI/ConfigWizard.cpp

748 lines
24 KiB
C++
Raw Normal View History

2018-03-13 11:39:57 +00:00
#include "ConfigWizard_private.hpp"
#include <iostream> // XXX
2018-03-13 11:39:57 +00:00
#include <algorithm>
#include <utility>
#include <wx/settings.h>
#include <wx/stattext.h>
#include <wx/textctrl.h>
#include <wx/dcclient.h>
#include <wx/statbmp.h>
#include <wx/checkbox.h>
#include <wx/statline.h>
#include "libslic3r/Utils.hpp"
#include "PresetBundle.hpp"
#include "GUI.hpp"
#include "slic3r/Utils/PresetUpdater.hpp"
2018-03-13 11:39:57 +00:00
namespace Slic3r {
namespace GUI {
// Printer model picker GUI control
struct PrinterPickerEvent : public wxEvent
{
std::string vendor_id;
std::string model_id;
std::string variant_name;
bool enable;
PrinterPickerEvent(wxEventType eventType, int winid, std::string vendor_id, std::string model_id, std::string variant_name, bool enable) :
wxEvent(winid, eventType),
vendor_id(std::move(vendor_id)),
model_id(std::move(model_id)),
variant_name(std::move(variant_name)),
enable(enable)
{}
virtual wxEvent *Clone() const
{
return new PrinterPickerEvent(*this);
}
};
wxDEFINE_EVENT(EVT_PRINTER_PICK, PrinterPickerEvent);
PrinterPicker::PrinterPicker(wxWindow *parent, const VendorProfile &vendor, const AppConfig &appconfig_vendors) :
wxPanel(parent),
variants_checked(0)
{
const auto vendor_id = vendor.id;
const auto &models = vendor.models;
auto *printer_grid = new wxFlexGridSizer(models.size(), 0, 20);
printer_grid->SetFlexibleDirection(wxVERTICAL);
SetSizer(printer_grid);
auto namefont = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
namefont.SetWeight(wxFONTWEIGHT_BOLD);
for (const auto &model : models) {
auto *panel = new wxPanel(this);
auto *sizer = new wxBoxSizer(wxVERTICAL);
panel->SetSizer(sizer);
auto *title = new wxStaticText(panel, wxID_ANY, model.name, wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
title->SetFont(namefont);
sizer->Add(title, 0, wxBOTTOM, 3);
auto bitmap_file = wxString::Format("printers/%s_%s.png", vendor.id, model.id);
wxBitmap bitmap(GUI::from_u8(Slic3r::var(bitmap_file.ToStdString())), wxBITMAP_TYPE_PNG);
auto *bitmap_widget = new wxStaticBitmap(panel, wxID_ANY, bitmap);
sizer->Add(bitmap_widget, 0, wxBOTTOM, 3);
sizer->AddSpacer(20);
const auto model_id = model.id;
for (const auto &variant : model.variants) {
const auto variant_name = variant.name;
auto *cbox = new wxCheckBox(panel, wxID_ANY, wxString::Format("%s %s %s", variant.name, _(L("mm")), _(L("nozzle"))));
bool enabled = appconfig_vendors.get_variant("PrusaResearch", model_id, variant_name);
variants_checked += enabled;
cbox->SetValue(enabled);
sizer->Add(cbox, 0, wxBOTTOM, 3);
cbox->Bind(wxEVT_CHECKBOX, [=](wxCommandEvent &event) {
this->variants_checked += event.IsChecked() ? 1 : -1;
PrinterPickerEvent evt(EVT_PRINTER_PICK, this->GetId(), std::move(vendor_id), std::move(model_id), std::move(variant_name), event.IsChecked());
this->AddPendingEvent(evt);
});
}
printer_grid->Add(panel);
}
}
2018-03-13 11:39:57 +00:00
// Wizard page base
ConfigWizardPage::ConfigWizardPage(ConfigWizard *parent, wxString title, wxString shortname) :
wxPanel(parent),
parent(parent),
shortname(std::move(shortname)),
p_prev(nullptr),
p_next(nullptr)
{
auto *sizer = new wxBoxSizer(wxVERTICAL);
auto *text = new wxStaticText(this, wxID_ANY, std::move(title), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
auto font = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
font.SetWeight(wxFONTWEIGHT_BOLD);
font.SetPointSize(14);
text->SetFont(font);
sizer->Add(text, 0, wxALIGN_LEFT, 0);
sizer->AddSpacer(10);
content = new wxBoxSizer(wxVERTICAL);
sizer->Add(content, 1);
SetSizer(sizer);
this->Hide();
Bind(wxEVT_SIZE, [this](wxSizeEvent &event) {
this->Layout();
event.Skip();
});
}
ConfigWizardPage::~ConfigWizardPage() {}
ConfigWizardPage* ConfigWizardPage::chain(ConfigWizardPage *page)
{
if (p_next != nullptr) { p_next->p_prev = nullptr; }
p_next = page;
if (page != nullptr) {
if (page->p_prev != nullptr) { page->p_prev->p_next = nullptr; }
page->p_prev = this;
}
return page;
}
void ConfigWizardPage::append_text(wxString text)
{
auto *widget = new wxStaticText(this, wxID_ANY, text, wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT);
widget->Wrap(CONTENT_WIDTH);
widget->SetMinSize(wxSize(CONTENT_WIDTH, -1));
2018-04-05 14:10:44 +00:00
append(widget);
2018-03-13 11:39:57 +00:00
}
void ConfigWizardPage::append_spacer(int space)
{
content->AddSpacer(space);
}
bool ConfigWizardPage::Show(bool show)
{
if (extra_buttons() != nullptr) { extra_buttons()->Show(show); }
return wxPanel::Show(show);
}
void ConfigWizardPage::enable_next(bool enable) { parent->p->enable_next(enable); }
// Wizard pages
PageWelcome::PageWelcome(ConfigWizard *parent) :
2018-03-13 11:39:57 +00:00
ConfigWizardPage(parent, _(L("Welcome to the Slic3r Configuration assistant")), _(L("Welcome"))),
printer_picker(nullptr),
others_buttons(new wxPanel(parent))
2018-03-13 11:39:57 +00:00
{
append_text(_(L("Hello, welcome to Slic3r Prusa Edition! TODO: This text.")));
// const PresetBundle &bundle = wizard_p()->bundle_vendors;
// const auto &vendors = bundle.vendors;
const auto &vendors = wizard_p()->vendors;
// const auto vendor_prusa = std::find(vendors.cbegin(), vendors.cend(), VendorProfile("PrusaResearch"));
const auto vendor_prusa = vendors.find("PrusaResearch");
2018-03-13 11:39:57 +00:00
if (vendor_prusa != vendors.cend()) {
const auto &models = vendor_prusa->second.models;
2018-03-13 11:39:57 +00:00
AppConfig &appconfig_vendors = this->wizard_p()->appconfig_vendors;
printer_picker = new PrinterPicker(this, vendor_prusa->second, appconfig_vendors);
printer_picker->Bind(EVT_PRINTER_PICK, [this, &appconfig_vendors](const PrinterPickerEvent &evt) {
appconfig_vendors.set_variant(evt.vendor_id, evt.model_id, evt.variant_name, evt.enable);
this->on_variant_checked();
});
2018-03-13 11:39:57 +00:00
2018-04-05 14:10:44 +00:00
append(printer_picker);
2018-03-13 11:39:57 +00:00
}
const size_t num_other_vendors = vendors.size() - (vendor_prusa != vendors.cend());
auto *sizer = new wxBoxSizer(wxHORIZONTAL);
auto *other_vendors = new wxButton(others_buttons, wxID_ANY, _(L("Other vendors")));
other_vendors->Enable(num_other_vendors > 0);
auto *custom_setup = new wxButton(others_buttons, wxID_ANY, _(L("Custom setup")));
2018-03-13 11:39:57 +00:00
sizer->Add(other_vendors);
sizer->AddSpacer(BTN_SPACING);
sizer->Add(custom_setup);
2018-03-13 11:39:57 +00:00
other_vendors->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &event) { this->wizard_p()->on_other_vendors(); });
custom_setup->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &event) { this->wizard_p()->on_custom_setup(); });
2018-03-13 11:39:57 +00:00
others_buttons->SetSizer(sizer);
2018-03-13 11:39:57 +00:00
}
void PageWelcome::on_page_set()
{
chain(wizard_p()->page_update);
on_variant_checked();
}
void PageWelcome::on_variant_checked()
{
enable_next(printer_picker != nullptr ? printer_picker->variants_checked > 0 : false);
2018-03-13 11:39:57 +00:00
}
PageUpdate::PageUpdate(ConfigWizard *parent) :
ConfigWizardPage(parent, _(L("Automatic updates")), _(L("Updates"))),
version_check(true),
preset_update(true)
2018-03-13 11:39:57 +00:00
{
const AppConfig *app_config = GUI::get_app_config();
2018-04-05 14:10:44 +00:00
2018-03-13 11:39:57 +00:00
append_text(_(L("TODO: text")));
auto *box_slic3r = new wxCheckBox(this, wxID_ANY, _(L("Check for Slic3r updates")));
box_slic3r->SetValue(app_config->get("version_check") == "1");
2018-04-05 14:10:44 +00:00
append(box_slic3r);
2018-03-13 11:39:57 +00:00
append_text(_(L("TODO: text")));
auto *box_presets = new wxCheckBox(this, wxID_ANY, _(L("Update built-in Presets automatically")));
box_presets->SetValue(app_config->get("preset_update") == "1");
2018-04-05 14:10:44 +00:00
append(box_presets);
box_slic3r->Bind(wxEVT_CHECKBOX, [this](wxCommandEvent &event) { this->version_check = event.IsChecked(); });
box_presets->Bind(wxEVT_CHECKBOX, [this](wxCommandEvent &event) { this->preset_update = event.IsChecked(); });
2018-03-13 11:39:57 +00:00
}
PageVendors::PageVendors(ConfigWizard *parent) :
ConfigWizardPage(parent, _(L("Other Vendors")), _(L("Other Vendors")))
{
append_text(_(L("Pick another vendor supported by Slic3r PE:")));
// const PresetBundle &bundle = wizard_p()->bundle_vendors;
// const auto &vendors = wizard_p()->vendors;
auto boldfont = wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT);
boldfont.SetWeight(wxFONTWEIGHT_BOLD);
AppConfig &appconfig_vendors = this->wizard_p()->appconfig_vendors;
wxArrayString choices_vendors;
// for (const auto &vendor : vendors) {
for (const auto vendor_pair : wizard_p()->vendors) {
const auto &vendor = vendor_pair.second;
if (vendor.id == "PrusaResearch") { continue; }
auto *picker = new PrinterPicker(this, vendor, appconfig_vendors);
picker->Hide();
pickers.push_back(picker);
choices_vendors.Add(vendor.name);
picker->Bind(EVT_PRINTER_PICK, [this, &appconfig_vendors](const PrinterPickerEvent &evt) {
appconfig_vendors.set_variant(evt.vendor_id, evt.model_id, evt.variant_name, evt.enable);
this->on_variant_checked();
});
}
auto *vendor_picker = new wxChoice(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, choices_vendors);
if (choices_vendors.GetCount() > 0) {
vendor_picker->SetSelection(0);
on_vendor_pick(0);
}
vendor_picker->Bind(wxEVT_CHOICE, [this](wxCommandEvent &evt) {
this->on_vendor_pick(evt.GetInt());
});
append(vendor_picker);
for (PrinterPicker *picker : pickers) { this->append(picker); }
}
2018-03-13 11:39:57 +00:00
void PageVendors::on_page_set()
{
on_variant_checked();
}
void PageVendors::on_vendor_pick(size_t i)
{
for (PrinterPicker *picker : pickers) { picker->Hide(); }
if (i < pickers.size()) {
pickers[i]->Show();
wizard_p()->layout_fit();
}
}
void PageVendors::on_variant_checked()
{
size_t variants_checked = 0;
for (const PrinterPicker *picker : pickers) { variants_checked += picker->variants_checked; }
enable_next(variants_checked > 0);
}
2018-04-05 14:10:44 +00:00
2018-03-13 11:39:57 +00:00
PageFirmware::PageFirmware(ConfigWizard *parent) :
2018-04-05 14:10:44 +00:00
ConfigWizardPage(parent, _(L("Firmware Type")), _(L("Firmware"))),
gcode_opt(print_config_def.options["gcode_flavor"]),
gcode_picker(nullptr)
{
append_text(_(L("Choose the type of firmware used by your printer.")));
append_text(gcode_opt.tooltip);
wxArrayString choices;
choices.Alloc(gcode_opt.enum_labels.size());
for (const auto &label : gcode_opt.enum_labels) {
choices.Add(label);
}
gcode_picker = new wxChoice(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, choices);
const auto &enum_values = gcode_opt.enum_values;
auto needle = enum_values.cend();
if (gcode_opt.default_value != nullptr) {
needle = std::find(enum_values.cbegin(), enum_values.cend(), gcode_opt.default_value->serialize());
}
if (needle != enum_values.cend()) {
gcode_picker->SetSelection(needle - enum_values.cbegin());
} else {
gcode_picker->SetSelection(0);
}
append(gcode_picker);
}
void PageFirmware::apply_custom_config(DynamicPrintConfig &config)
{
ConfigOptionEnum<GCodeFlavor> opt;
auto sel = gcode_picker->GetSelection();
if (sel != wxNOT_FOUND && opt.deserialize(gcode_picker->GetString(sel).ToStdString())) {
config.set_key_value("gcode_flavor", &opt);
}
}
2018-03-13 11:39:57 +00:00
PageBedShape::PageBedShape(ConfigWizard *parent) :
2018-04-05 14:10:44 +00:00
ConfigWizardPage(parent, _(L("Bed Shape and Size")), _(L("Bed Shape"))),
shape_panel(new BedShapePanel(this))
{
append_text(_(L("Set the shape of your printer's bed.")));
shape_panel->build_panel(wizard_p()->custom_config->option<ConfigOptionPoints>("bed_shape"));
2018-04-05 14:10:44 +00:00
append(shape_panel);
}
void PageBedShape::apply_custom_config(DynamicPrintConfig &config)
{
const auto points(shape_panel->GetValue());
auto *opt = new ConfigOptionPoints(points);
config.set_key_value("bed_shape", opt);
}
2018-03-13 11:39:57 +00:00
PageDiameters::PageDiameters(ConfigWizard *parent) :
2018-04-05 14:10:44 +00:00
ConfigWizardPage(parent, _(L("Filament and Nozzle Diameters")), _(L("Print Diameters"))),
spin_nozzle(new wxSpinCtrlDouble(this, wxID_ANY)),
spin_filam(new wxSpinCtrlDouble(this, wxID_ANY))
{
spin_nozzle->SetDigits(2);
spin_nozzle->SetIncrement(0.1);
const auto &def_nozzle = print_config_def.options["nozzle_diameter"];
auto *default_nozzle = dynamic_cast<const ConfigOptionFloats*>(def_nozzle.default_value);
spin_nozzle->SetValue(default_nozzle != nullptr && default_nozzle->size() > 0 ? default_nozzle->get_at(0) : 0.5);
spin_filam->SetDigits(2);
spin_filam->SetIncrement(0.25);
const auto &def_filam = print_config_def.options["filament_diameter"];
auto *default_filam = dynamic_cast<const ConfigOptionFloats*>(def_filam.default_value);
spin_filam->SetValue(default_filam != nullptr && default_filam->size() > 0 ? default_filam->get_at(0) : 3.0);
append_text(_(L("Enter the diameter of your printer's hot end nozzle.")));
auto *sizer_nozzle = new wxFlexGridSizer(3, 5, 5);
auto *text_nozzle = new wxStaticText(this, wxID_ANY, _(L("Nozzle Diameter:")));
auto *unit_nozzle = new wxStaticText(this, wxID_ANY, _(L("mm")));
sizer_nozzle->AddGrowableCol(0, 1);
sizer_nozzle->Add(text_nozzle, 0, wxALIGN_CENTRE_VERTICAL);
sizer_nozzle->Add(spin_nozzle);
sizer_nozzle->Add(unit_nozzle, 0, wxALIGN_CENTRE_VERTICAL);
append(sizer_nozzle);
append_spacer(VERTICAL_SPACING);
append_text(_(L("Enter the diameter of your filament.")));
append_text(_(L("Good precision is required, so use a caliper and do multiple measurements along the filament, then compute the average.")));
auto *sizer_filam = new wxFlexGridSizer(3, 5, 5);
auto *text_filam = new wxStaticText(this, wxID_ANY, _(L("Filament Diameter:")));
auto *unit_filam = new wxStaticText(this, wxID_ANY, _(L("mm")));
sizer_filam->AddGrowableCol(0, 1);
sizer_filam->Add(text_filam, 0, wxALIGN_CENTRE_VERTICAL);
sizer_filam->Add(spin_filam);
sizer_filam->Add(unit_filam, 0, wxALIGN_CENTRE_VERTICAL);
append(sizer_filam);
}
void PageDiameters::apply_custom_config(DynamicPrintConfig &config)
{
auto *opt_nozzle = new ConfigOptionFloats(1, spin_nozzle->GetValue());
config.set_key_value("nozzle_diameter", opt_nozzle);
auto *opt_filam = new ConfigOptionFloats(1, spin_filam->GetValue());
config.set_key_value("filament_diameter", opt_filam);
}
2018-03-13 11:39:57 +00:00
PageTemperatures::PageTemperatures(ConfigWizard *parent) :
2018-04-05 14:10:44 +00:00
ConfigWizardPage(parent, _(L("Extruder and Bed Temperatures")), _(L("Temperatures"))),
2018-04-06 11:18:12 +00:00
spin_extr(new wxSpinCtrlDouble(this, wxID_ANY)),
spin_bed(new wxSpinCtrlDouble(this, wxID_ANY))
2018-04-05 14:10:44 +00:00
{
2018-04-06 11:18:12 +00:00
spin_extr->SetIncrement(5.0);
2018-04-05 14:10:44 +00:00
const auto &def_extr = print_config_def.options["temperature"];
spin_extr->SetRange(def_extr.min, def_extr.max);
auto *default_extr = dynamic_cast<const ConfigOptionInts*>(def_extr.default_value);
spin_extr->SetValue(default_extr != nullptr && default_extr->size() > 0 ? default_extr->get_at(0) : 200);
2018-04-06 11:18:12 +00:00
spin_bed->SetIncrement(5.0);
2018-04-05 14:10:44 +00:00
const auto &def_bed = print_config_def.options["bed_temperature"];
spin_bed->SetRange(def_bed.min, def_bed.max);
auto *default_bed = dynamic_cast<const ConfigOptionInts*>(def_bed.default_value);
spin_bed->SetValue(default_bed != nullptr && default_bed->size() > 0 ? default_bed->get_at(0) : 0);
append_text(_(L("Enter the temperature needed for extruding your filament.")));
append_text(_(L("A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS.")));
auto *sizer_extr = new wxFlexGridSizer(3, 5, 5);
auto *text_extr = new wxStaticText(this, wxID_ANY, _(L("Extrusion Temperature:")));
auto *unit_extr = new wxStaticText(this, wxID_ANY, _(L("°C")));
sizer_extr->AddGrowableCol(0, 1);
sizer_extr->Add(text_extr, 0, wxALIGN_CENTRE_VERTICAL);
sizer_extr->Add(spin_extr);
sizer_extr->Add(unit_extr, 0, wxALIGN_CENTRE_VERTICAL);
append(sizer_extr);
append_spacer(VERTICAL_SPACING);
append_text(_(L("Enter the bed temperature needed for getting your filament to stick to your heated bed.")));
append_text(_(L("A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have no heated bed.")));
auto *sizer_bed = new wxFlexGridSizer(3, 5, 5);
auto *text_bed = new wxStaticText(this, wxID_ANY, _(L("Bed Temperature:")));
auto *unit_bed = new wxStaticText(this, wxID_ANY, _(L("°C")));
sizer_bed->AddGrowableCol(0, 1);
sizer_bed->Add(text_bed, 0, wxALIGN_CENTRE_VERTICAL);
sizer_bed->Add(spin_bed);
sizer_bed->Add(unit_bed, 0, wxALIGN_CENTRE_VERTICAL);
append(sizer_bed);
}
void PageTemperatures::apply_custom_config(DynamicPrintConfig &config)
{
auto *opt_extr = new ConfigOptionInts(1, spin_extr->GetValue());
config.set_key_value("temperature", opt_extr);
auto *opt_extr1st = new ConfigOptionInts(1, spin_extr->GetValue());
config.set_key_value("first_layer_temperature", opt_extr1st);
auto *opt_bed = new ConfigOptionInts(1, spin_bed->GetValue());
config.set_key_value("bed_temperature", opt_bed);
auto *opt_bed1st = new ConfigOptionInts(1, spin_bed->GetValue());
config.set_key_value("first_layer_bed_temperature", opt_bed1st);
}
2018-03-13 11:39:57 +00:00
// Index
ConfigWizardIndex::ConfigWizardIndex(wxWindow *parent) :
wxPanel(parent),
bg(GUI::from_u8(Slic3r::var("Slic3r_192px_transparent.png")), wxBITMAP_TYPE_PNG),
bullet_black(GUI::from_u8(Slic3r::var("bullet_black.png")), wxBITMAP_TYPE_PNG),
bullet_blue(GUI::from_u8(Slic3r::var("bullet_blue.png")), wxBITMAP_TYPE_PNG),
bullet_white(GUI::from_u8(Slic3r::var("bullet_white.png")), wxBITMAP_TYPE_PNG)
{
SetMinSize(bg.GetSize());
wxClientDC dc(this);
text_height = dc.GetCharHeight();
2018-04-09 08:41:34 +00:00
// Add logo bitmap.
// This could be done in on_paint() along with the index labels, but I've found it tricky
// to get the bitmap rendered well on all platforms with transparent background.
// In some cases it didn't work at all. And so wxStaticBitmap is used here instead,
// because it has all the platform quirks figured out.
auto *sizer = new wxBoxSizer(wxVERTICAL);
auto *logo = new wxStaticBitmap(this, wxID_ANY, bg);
sizer->AddStretchSpacer();
sizer->Add(logo);
SetSizer(sizer);
Bind(wxEVT_PAINT, &ConfigWizardIndex::on_paint, this);
2018-03-13 11:39:57 +00:00
}
void ConfigWizardIndex::load_items(ConfigWizardPage *firstpage)
{
items.clear();
item_active = items.cend();
for (auto *page = firstpage; page != nullptr; page = page->page_next()) {
items.emplace_back(page->shortname);
}
Refresh();
}
void ConfigWizardIndex::set_active(ConfigWizardPage *page)
{
item_active = std::find(items.cbegin(), items.cend(), page->shortname);
Refresh();
}
void ConfigWizardIndex::on_paint(wxPaintEvent & evt)
{
enum {
MARGIN = 10,
SPACING = 5,
};
const auto size = GetClientSize();
2018-04-09 08:41:34 +00:00
if (size.GetHeight() == 0 || size.GetWidth() == 0) { return; }
2018-03-13 11:39:57 +00:00
wxPaintDC dc(this);
const auto bullet_w = bullet_black.GetSize().GetWidth();
const auto bullet_h = bullet_black.GetSize().GetHeight();
const int yoff_icon = bullet_h < text_height ? (text_height - bullet_h) / 2 : 0;
const int yoff_text = bullet_h > text_height ? (bullet_h - text_height) / 2 : 0;
const int yinc = std::max(bullet_h, text_height) + SPACING;
unsigned y = 0;
for (auto it = items.cbegin(); it != items.cend(); ++it) {
if (it < item_active) { dc.DrawBitmap(bullet_black, MARGIN, y + yoff_icon, false); }
if (it == item_active) { dc.DrawBitmap(bullet_blue, MARGIN, y + yoff_icon, false); }
if (it > item_active) { dc.DrawBitmap(bullet_white, MARGIN, y + yoff_icon, false); }
dc.DrawText(*it, MARGIN + bullet_w + SPACING, y + yoff_text);
y += yinc;
}
}
// priv
void ConfigWizard::priv::load_vendors()
{
const auto vendor_dir = fs::path(Slic3r::data_dir()) / "vendor";
const auto rsrc_vendor_dir = fs::path(resources_dir()) / "profiles";
// Load vendors from the "vendors" directory in datadir
for (fs::directory_iterator it(vendor_dir); it != fs::directory_iterator(); ++it) {
if (it->path().extension() == ".ini") {
auto vp = VendorProfile::from_ini(it->path());
vendors[vp.id] = std::move(vp);
}
}
// Additionally load up vendors from the application resources directory, but only those not seen in the datadir
for (fs::directory_iterator it(rsrc_vendor_dir); it != fs::directory_iterator(); ++it) {
if (it->path().extension() == ".ini") {
const auto id = it->path().stem().string();
if (vendors.find(id) == vendors.end()) {
auto vp = VendorProfile::from_ini(it->path());
vendors_rsrc[vp.id] = it->path();
vendors[vp.id] = std::move(vp);
}
}
}
appconfig_vendors.set_vendors(*GUI::get_app_config());
}
2018-03-13 11:39:57 +00:00
void ConfigWizard::priv::index_refresh()
{
index->load_items(page_welcome);
}
void ConfigWizard::priv::add_page(ConfigWizardPage *page)
{
topsizer->Add(page, 0, wxEXPAND);
auto *extra_buttons = page->extra_buttons();
if (extra_buttons != nullptr) {
btnsizer->Prepend(extra_buttons, 0);
}
}
void ConfigWizard::priv::set_page(ConfigWizardPage *page)
{
if (page == nullptr) { return; }
if (page_current != nullptr) { page_current->Hide(); }
page_current = page;
enable_next(true);
page->on_page_set();
index->load_items(page_welcome);
index->set_active(page);
page->Show();
btn_prev->Enable(page->page_prev() != nullptr);
btn_next->Show(page->page_next() != nullptr);
btn_finish->Show(page->page_next() == nullptr);
layout_fit();
}
void ConfigWizard::priv::layout_fit()
{
2018-03-13 11:39:57 +00:00
q->Layout();
q->Fit();
2018-03-13 11:39:57 +00:00
}
void ConfigWizard::priv::enable_next(bool enable)
{
btn_next->Enable(enable);
btn_finish->Enable(enable);
}
void ConfigWizard::priv::on_other_vendors()
{
page_welcome
->chain(page_vendors)
->chain(page_update);
set_page(page_vendors);
}
void ConfigWizard::priv::on_custom_setup()
{
page_welcome->chain(page_firmware);
page_temps->chain(page_update);
set_page(page_firmware);
}
2018-04-05 14:10:44 +00:00
void ConfigWizard::priv::apply_config(AppConfig *app_config, PresetBundle *preset_bundle)
{
const bool is_custom_setup = page_welcome->page_next() == page_firmware;
if (! is_custom_setup) {
const auto enabled_vendors = appconfig_vendors.vendors();
for (const auto &vendor_rsrc : vendors_rsrc) {
const auto vendor = enabled_vendors.find(vendor_rsrc.first);
if (vendor == enabled_vendors.end()) { continue; }
size_t size_sum = 0;
for (const auto &model : vendor->second) { size_sum += model.second.size(); }
if (size_sum == 0) { continue; }
// This vendor needs to be installed
PresetBundle::install_vendor_configbundle(vendor_rsrc.second);
}
app_config->set_vendors(appconfig_vendors);
app_config->set("version_check", page_update->version_check ? "1" : "0");
app_config->set("preset_update", page_update->preset_update ? "1" : "0");
2018-04-05 14:10:44 +00:00
app_config->reset_selections(); // XXX: only on "fresh start"?
preset_bundle->load_presets(*app_config);
} else {
2018-04-05 14:10:44 +00:00
for (ConfigWizardPage *page = page_firmware; page != nullptr; page = page->page_next()) {
page->apply_custom_config(*custom_config);
2018-04-05 14:10:44 +00:00
}
preset_bundle->load_config("My Settings", *custom_config);
}
}
2018-03-13 11:39:57 +00:00
// Public
ConfigWizard::ConfigWizard(wxWindow *parent) :
2018-03-13 11:39:57 +00:00
wxDialog(parent, wxID_ANY, _(L("Configuration Assistant")), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE | wxRESIZE_BORDER),
p(new priv(this))
{
p->load_vendors();
p->custom_config.reset(DynamicPrintConfig::new_from_defaults_keys({
2018-04-05 14:10:44 +00:00
"gcode_flavor", "bed_shape", "nozzle_diameter", "filament_diameter", "temperature", "bed_temperature",
}));
2018-03-13 11:39:57 +00:00
p->index = new ConfigWizardIndex(this);
auto *vsizer = new wxBoxSizer(wxVERTICAL);
p->topsizer = new wxBoxSizer(wxHORIZONTAL);
auto *hline = new wxStaticLine(this);
p->btnsizer = new wxBoxSizer(wxHORIZONTAL);
p->topsizer->Add(p->index, 0, wxEXPAND);
p->topsizer->AddSpacer(INDEX_MARGIN);
2018-04-05 14:10:44 +00:00
p->btn_prev = new wxButton(this, wxID_BACKWARD);
p->btn_next = new wxButton(this, wxID_FORWARD);
2018-03-13 11:39:57 +00:00
p->btn_finish = new wxButton(this, wxID_APPLY, _(L("&Finish")));
p->btn_cancel = new wxButton(this, wxID_CANCEL);
p->btnsizer->AddStretchSpacer();
p->btnsizer->Add(p->btn_prev, 0, wxLEFT, BTN_SPACING);
p->btnsizer->Add(p->btn_next, 0, wxLEFT, BTN_SPACING);
p->btnsizer->Add(p->btn_finish, 0, wxLEFT, BTN_SPACING);
p->btnsizer->Add(p->btn_cancel, 0, wxLEFT, BTN_SPACING);
p->add_page(p->page_welcome = new PageWelcome(this));
2018-03-13 11:39:57 +00:00
p->add_page(p->page_update = new PageUpdate(this));
p->add_page(p->page_vendors = new PageVendors(this));
p->add_page(p->page_firmware = new PageFirmware(this));
p->add_page(p->page_bed = new PageBedShape(this));
p->add_page(p->page_diams = new PageDiameters(this));
p->add_page(p->page_temps = new PageTemperatures(this));
p->index_refresh();
p->page_welcome->chain(p->page_update);
p->page_firmware
->chain(p->page_bed)
->chain(p->page_diams)
->chain(p->page_temps);
vsizer->Add(p->topsizer, 1, wxEXPAND | wxALL, DIALOG_MARGIN);
vsizer->Add(hline, 0, wxEXPAND);
vsizer->Add(p->btnsizer, 0, wxEXPAND | wxALL, DIALOG_MARGIN);
p->set_page(p->page_welcome);
SetSizerAndFit(vsizer);
SetMinSize(GetSize());
p->btn_prev->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &evt) { this->p->go_prev(); });
p->btn_next->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &evt) { this->p->go_next(); });
2018-04-05 14:10:44 +00:00
p->btn_finish->Bind(wxEVT_BUTTON, [this](const wxCommandEvent &evt) { this->EndModal(wxID_OK); });
2018-03-13 11:39:57 +00:00
}
ConfigWizard::~ConfigWizard() {}
2018-04-06 11:18:12 +00:00
bool ConfigWizard::run(wxWindow *parent, PresetBundle *preset_bundle)
2018-03-13 11:39:57 +00:00
{
ConfigWizard wizard(parent);
if (wizard.ShowModal() == wxID_OK) {
2018-04-05 14:10:44 +00:00
wizard.p->apply_config(GUI::get_app_config(), preset_bundle);
2018-04-06 11:18:12 +00:00
return true;
} else {
return false;
2018-03-13 11:39:57 +00:00
}
}
}
}