2021-11-03 16:11:58 +00:00
# Print profiles for the Ultimaker printers.
# https://github.com/prusa3d/PrusaSlicer-settings/issues/143
# author: https://github.com/foreachthing
[vendor]
# Vendor name will be shown by the Config Wizard.
name = Ultimaker
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.0
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Ultimaker/
# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.
[printer_model:ULTIMAKER2]
name = Ultimaker 2
variants = 0.4
technology = FFF
bed_model = ultimaker2_bed.stl
bed_texture = ultimaker2.svg
default_materials = Generic PLA @ULTIMAKER2; Generic PETG @ULTIMAKER2; Generic ABS @ULTIMAKER2
# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
# Common print preset
[print:*common*]
avoid_crossing_perimeters = 1
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = rectilinear
bottom_solid_layers = 4
bottom_solid_min_thickness = 0
bridge_acceleration = 0
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 60
brim_separation = 0
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 0
compatible_printers =
compatible_printers_condition =
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 0
draft_shield = disabled
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 0
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 75%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 50
extruder_clearance_radius = 60
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = grid
first_layer_acceleration = 0
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.45
first_layer_height = 0.2
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 20
gcode_comments = 1
gcode_label_objects = 0
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.5
infill_first = 1
infill_only_where_needed = 0
infill_overlap = 35%
infill_speed = 60
inherits =
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_print_speed = 80
max_volumetric_speed = 0
min_skirt_length = 2
mmu_segmented_region_max_width = 0
notes = Ultimaker 2, 0.4 mm Nozzle
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 50
perimeters = 2
post_process =
print_settings_id =
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 3
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 75%
solid_infill_below_area = 10
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 45
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 1
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.4
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_pattern = auto
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear-grid
support_material_spacing = 4
support_material_speed = 60
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 0
support_material_with_sheath = 0
support_material_xy_spacing = 0.8
thick_bridges = 1
thin_walls = 0
threads = 8
top_fill_pattern = rectilinear
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 40
top_solid_layers = 4
top_solid_min_thickness = 0
travel_speed = 120
travel_speed_z = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0
[print:*0.12mm*]
inherits = *common*
perimeter_speed = 40
external_perimeter_speed = 25
infill_speed = 50
solid_infill_speed = 40
layer_height = 0.12
perimeters = 3
top_infill_extrusion_width = 0.4
bottom_solid_layers = 6
top_solid_layers = 7
[print:*0.20mm*]
inherits = *common*
perimeter_speed = 40
external_perimeter_speed = 25
infill_speed = 50
solid_infill_speed = 40
layer_height = 0.20
top_infill_extrusion_width = 0.4
bottom_solid_layers = 4
top_solid_layers = 5
[print:*0.25mm*]
inherits = *common*
perimeter_speed = 40
external_perimeter_speed = 25
infill_speed = 50
solid_infill_speed = 40
layer_height = 0.25
top_infill_extrusion_width = 0.45
bottom_solid_layers = 3
top_solid_layers = 4
[print:0.12mm DETAIL @ULTIMAKER2]
inherits = *0.12mm*
travel_speed = 150
infill_speed = 50
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_extrusion_width = 0.38
compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4
[print:0.20mm NORMAL @ULTIMAKER2]
inherits = *0.20mm*
travel_speed = 150
infill_speed = 50
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_extrusion_width = 0.38
compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4
[print:0.25mm DRAFT @ULTIMAKER2]
inherits = *0.25mm*
travel_speed = 150
infill_speed = 50
solid_infill_speed = 40
top_solid_infill_speed = 30
support_material_extrusion_width = 0.38
compatible_printers_condition = printer_model=="ULTIMAKER2" and nozzle_diameter[0]==0.4
# Common filament preset
[filament:*common*]
cooling = 0
compatible_printers =
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
2021-11-03 21:43:00 +00:00
filament_diameter = 2.85
2021-11-03 16:11:58 +00:00
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ULTIMAKER.*/
[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #FFF0E0
filament_max_volumetric_speed = 0
filament_type = PLA
filament_density = 1.24
first_layer_bed_temperature = 55
first_layer_temperature = 205
fan_always_on = 1
cooling = 1
min_fan_speed = 100
max_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 3
temperature = 210
[filament:*PET*]
inherits = *common*
fan_below_layer_time = 15
filament_colour = #FFF0E0
filament_max_volumetric_speed = 0
filament_type = PETG
filament_density = 1.27
first_layer_bed_temperature = 85
bed_temperature = 85
first_layer_temperature = 240
temperature = 235
fan_always_on = 1
cooling = 1
min_fan_speed = 20
max_fan_speed = 40
bridge_fan_speed = 40
slowdown_below_layer_time = 15
min_print_speed = 10
disable_fan_first_layers = 3
[filament:*ABS*]
inherits = *common*
fan_below_layer_time = 15
filament_colour = #FFF0E0
filament_max_volumetric_speed = 0
filament_type = ABS
2021-11-03 21:45:28 +00:00
filament_density = 1.10
2021-11-03 16:11:58 +00:00
first_layer_bed_temperature = 80
bed_temperature = 80
first_layer_temperature = 240
temperature = 235
fan_always_on = 1
cooling = 1
min_fan_speed = 5
max_fan_speed = 5
bridge_fan_speed = 10
slowdown_below_layer_time = 15
min_print_speed = 10
disable_fan_first_layers = 3
[filament:Generic PLA @ULTIMAKER2]
inherits = *PLA*
filament_vendor = Generic
filament_cost =
[filament:Generic Black PLA @ULTIMAKER2]
inherits = *PLA*
filament_vendor = Generic
filament_colour = #0E3F3F
filament_cost =
[filament:Generic PETG @ULTIMAKER2]
inherits = *PET*
filament_vendor = Generic
filament_cost =
[filament:Generic ABS @ULTIMAKER2]
inherits = *ABS*
filament_vendor = Generic
filament_cost =
# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;layer:[layer_num];\nM117 Layer [layer_num];\n
between_objects_gcode =
deretract_speed = 0
extruder_colour = #FFF0E0
extruder_offset = 0x0
gcode_flavor = reprap
silent_mode = 0
remaining_times = 0
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 1500
machine_max_acceleration_retracting = 1500
machine_max_acceleration_x = 3000
machine_max_acceleration_y = 3000
machine_max_acceleration_z = 500
machine_max_feedrate_e = 120
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 12
machine_max_jerk_e = 2.5
machine_max_jerk_x = 20
machine_max_jerk_y = 20
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode =
max_print_height = 212
octoprint_apikey =
octoprint_host =
printer_notes =
printer_settings_id =
retract_before_travel = 5
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 6
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 50
serial_port =
single_extruder_multi_material = 0
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0
[printer:Ultimaker 2]
inherits = *common*
printer_model = ULTIMAKER2
bed_shape = 0x0,224x0,224x225,0x225
printer_variant = 0.4
max_layer_height = 0.3
min_layer_height = 0.08
printer_notes = Dont remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ULTIMAKER\nPRINTER_MODEL_ULTIMAKER2
nozzle_diameter = 0.4
default_print_profile = 0.20mm NORMAL @ULTIMAKER2
default_filament_profile = Generic PLA @ULTIMAKER2
start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n\n; # # # # # # START Header\nG21 ; metric values\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nM107 ; start with the fan off\n\nG28 X0 Y0 Z0 ; move X/Y/Z to endstops\nG1 X1 Y6 F15000 ; move X/Y to start position\nG1 Z35 F9000 ; move Z to start position\n\n; Heat up bed and nozzle\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temperature - 5\nM140 S[first_layer_bed_temperature] ; continue bed heating\nM109 S[first_layer_temperature] ; wait for nozzle temperature\n\nG92 E0 ; zero the extruded length\nG1 F150 E22 ; purge nozzle with filament\nG92 E0 ; zero the extruded length again\nG1 F75 E7 ; additional priming\nG92 E0 ; zero the extruded length again\n\n; # # # # # # END Header
end_gcode = ; # # # # # # START Footer\nG91 ; relative coordinates\n;G1 E-1 F1200 ; retract the filament\nG1 Z+15 X-10 Y-10 E-7 F6000 ; move Z a bit\n; G1 X-10 Y-10 F6000 ; move XY a bit\nG1 E-5.5 F300 ; retract the filament\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nM104 S0 ; extruder heater off\nM140 S0 ; heated bed heater off (if you have it)\nM84 ; disable motors\n; # # # # # # END Footer\n
