diff --git a/resources/profiles/LulzBot.idx b/resources/profiles/LulzBot.idx index 8638bdbbe..e182c33db 100644 --- a/resources/profiles/LulzBot.idx +++ b/resources/profiles/LulzBot.idx @@ -1,4 +1,5 @@ -min_slic3r_version = 2.3.0-beta2 -0.0.2 Removed obsolete host keys -min_slic3r_version = 2.2.0-alpha3 -0.0.1 Initial version +min_slic3r_version = 2.3.0-beta2 +0.1.0 General rework. Added new print and filament profiles. +0.0.2 Removed obsolete host keys +min_slic3r_version = 2.2.0-alpha3 +0.0.1 Initial version diff --git a/resources/profiles/LulzBot.ini b/resources/profiles/LulzBot.ini index 2338beaee..3ab699922 100644 --- a/resources/profiles/LulzBot.ini +++ b/resources/profiles/LulzBot.ini @@ -1,9 +1,10 @@ -# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC +# LulzBot profiles +# Based on community profiles and original profiles from Cura LulzBot Edition. [vendor] # Vendor name will be shown by the Config Wizard. name = LulzBot -config_version = 0.0.2 +config_version = 0.1.0 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/ [printer_model:MINI_AERO] @@ -12,18 +13,26 @@ variants = 0.5 technology = FFF #bed_model = mini_bed.stl #bed_texture = mini.svg -default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot +default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot [printer_model:TAZ6_AERO] name = Taz6 Aero variants = 0.5 technology = FFF -default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot +default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot -[print:0.3mm @lulzbot] +# [printer_model:TAZ_WORKHORSE] +# name = Taz Workhorse +# variants = 0.5 +# technology = FFF +# default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot + +[print:*common*] avoid_crossing_perimeters = 0 -bottom_fill_pattern = rectilinear +bottom_fill_pattern = monotonic +top_fill_pattern = monotonic bottom_solid_layers = 3 +top_solid_layers = 4 bridge_acceleration = 500 bridge_angle = 0 bridge_flow_ratio = 1 @@ -34,26 +43,24 @@ compatible_printers = compatible_printers_condition = complete_objects = 0 default_acceleration = 500 -dont_support_bridges = 1 +dont_support_bridges = 0 elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 0 +ensure_vertical_shell_thickness = 1 +extra_perimeters = 0 external_perimeter_extrusion_width = 0.56 -external_perimeter_speed = 50% +external_perimeter_speed = 35 external_perimeters_first = 0 -extra_perimeters = 1 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 extrusion_width = 0.56 fill_angle = 45 fill_density = 20% -fill_pattern = gyroid +fill_pattern = grid first_layer_acceleration = 500 first_layer_extrusion_width = 0.6 -first_layer_height = 100% -first_layer_speed = 40% +first_layer_height = 0.3 +first_layer_speed = 15 gap_fill_speed = 20 -gcode_comments = 0 -gcode_label_objects = 0 +infill_anchor = 1 +infill_anchor_max = 20 infill_acceleration = 500 infill_every_layers = 1 infill_extruder = 1 @@ -62,33 +69,31 @@ infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% infill_speed = 60 -inherits = -interface_shells = 0 -layer_height = 0.3 +layer_height = 0.25 max_print_speed = 80 max_volumetric_speed = 0 min_skirt_length = 0 -notes = -only_retract_when_crossing_perimeters = 1 +only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode overhangs = 1 perimeter_acceleration = 500 perimeter_extruder = 1 perimeter_extrusion_width = 0.56 -perimeter_speed = 60 +perimeter_speed = 45 perimeters = 3 post_process = raft_layers = 0 +raft_first_layer_density = 70 resolution = 0 -seam_position = nearest +seam_position = aligned single_extruder_multi_material_priming = 1 skirt_distance = 3 skirt_height = 1 skirts = 3 slice_closing_radius = 0.049 -small_perimeter_speed = 15 -solid_infill_below_area = 70 +small_perimeter_speed = 22 +solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.56 @@ -96,7 +101,7 @@ solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 -support_material_angle = 0 +support_material_angle = 45 support_material_auto = 1 support_material_buildplate_only = 0 support_material_contact_distance = 0.2 @@ -110,17 +115,14 @@ support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 -support_material_speed = 60 +support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 0 support_material_with_sheath = 1 -support_material_xy_spacing = 50% +support_material_xy_spacing = 60% thin_walls = 1 -threads = 12 -top_fill_pattern = rectilinear top_infill_extrusion_width = 0.52 top_solid_infill_speed = 40 -top_solid_layers = 3 travel_speed = 175 wipe_tower = 0 wipe_tower_bridging = 10 @@ -130,121 +132,116 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 +[print:0.14mm DETAIL @lulzbot] +inherits = *common* +layer_height = 0.14 +bottom_solid_layers = 8 +top_solid_layers = 8 +infill_speed = 40 +solid_infill_speed = 50 +perimeter_speed = 35 +external_perimeter_speed = 30 +top_solid_infill_speed = 40 + +[print:0.25mm STANDARD @lulzbot] +inherits = *common* + +[print:0.30mm SPEED @lulzbot] +inherits = *common* +renamed_from = "0.3mm @lulzbot" +layer_height = 0.3 +seam_position = nearest +top_solid_layers = 3 +infill_speed = 45 +perimeter_speed = 40 +external_perimeter_speed = 35 + [filament:ColorFabb PLA-PHA @lulzbot] filament_vendor = ColorFabb bed_temperature = 60 bridge_fan_speed = 100 -compatible_printers = -compatible_printers_condition = -compatible_prints = -compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 1 -fan_always_on = 0 +fan_always_on = 1 fan_below_layer_time = 60 filament_colour = #29B2B2 -filament_cooling_final_speed = 3.4 -filament_cooling_initial_speed = 2.2 -filament_cooling_moves = 4 filament_cost = 0 filament_density = 1.25 -filament_deretract_speed = nil filament_diameter = 2.85 -filament_load_time = 0 -filament_loading_speed = 28 -filament_loading_speed_start = 3 -filament_max_volumetric_speed = 0 -filament_minimal_purge_on_wipe_tower = 15 -filament_notes = "" -filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" -filament_retract_before_travel = nil -filament_retract_before_wipe = nil -filament_retract_layer_change = nil -filament_retract_length = nil -filament_retract_lift = nil -filament_retract_lift_above = nil -filament_retract_lift_below = nil -filament_retract_restart_extra = nil -filament_retract_speed = nil filament_soluble = 0 -filament_toolchange_delay = 0 filament_type = PLA -filament_unload_time = 0 -filament_unloading_speed = 90 -filament_unloading_speed_start = 100 -filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 200 -inherits = max_fan_speed = 100 min_fan_speed = 35 min_print_speed = 10 -slowdown_below_layer_time = 5 +slowdown_below_layer_time = 10 start_filament_gcode = "; Filament gcode\n" temperature = 200 -[filament:PrintedSolid Jesse PLA @lulzbot] -filament_vendor = PrintedSolid +[filament:Jessie PLA @lulzbot] +filament_vendor = Printed Solid +renamed_from = "PrintedSolid Jesse PLA @lulzbot" bed_temperature = 60 bridge_fan_speed = 100 -compatible_printers = -compatible_printers_condition = -compatible_prints = -compatible_prints_condition = cooling = 1 disable_fan_first_layers = 3 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 1 -fan_always_on = 0 +fan_always_on = 1 fan_below_layer_time = 60 filament_colour = #29B2B2 -filament_cooling_final_speed = 3.4 -filament_cooling_initial_speed = 2.2 -filament_cooling_moves = 4 filament_cost = 27 -filament_density = 1.25 -filament_deretract_speed = nil +filament_density = 1.24 filament_diameter = 2.85 -filament_load_time = 0 -filament_loading_speed = 28 -filament_loading_speed_start = 3 -filament_max_volumetric_speed = 0 -filament_minimal_purge_on_wipe_tower = 15 -filament_notes = "" -filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" -filament_retract_before_travel = nil -filament_retract_before_wipe = nil -filament_retract_layer_change = nil -filament_retract_length = nil -filament_retract_lift = nil -filament_retract_lift_above = nil -filament_retract_lift_below = nil -filament_retract_restart_extra = nil -filament_retract_speed = nil -filament_soluble = 0 -filament_toolchange_delay = 0 filament_type = PLA -filament_unload_time = 0 -filament_unloading_speed = 90 -filament_unloading_speed_start = 100 -filament_wipe = nil first_layer_bed_temperature = 60 first_layer_temperature = 220 -inherits = max_fan_speed = 100 -min_fan_speed = 35 +min_fan_speed = 80 min_print_speed = 10 -slowdown_below_layer_time = 5 +slowdown_below_layer_time = 10 start_filament_gcode = "; Filament gcode\n" temperature = 220 +[filament:Generic PLA @lulzbot] +inherits = Jessie PLA @lulzbot +filament_vendor = Generic + +[filament:Generic PETG @lulzbot] +filament_vendor = Generic +bed_temperature = 60 +first_layer_bed_temperature = 65 +first_layer_temperature = 235 +temperature = 230 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #29B2B2 +filament_cost = 27 +filament_density = 1.27 +filament_diameter = 2.85 +filament_notes = "Use glue stick." +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PETG +max_fan_speed = 80 +min_fan_speed = 40 +min_print_speed = 10 +slowdown_below_layer_time = 10 +start_filament_gcode = "; Filament gcode\n" + [printer:Mini Aero 0.5mm] printer_model = MINI_AERO printer_variant = 0.5 -default_print_profile = 0.3mm @lulzbot -default_filament_profile = PrintedSolid Jesse PLA @lulzbot +default_print_profile = 0.25mm STANDARD @lulzbot +default_filament_profile = Jessie PLA @lulzbot bed_shape = 0x0,154x0,154x154,0x154 before_layer_gcode = between_objects_gcode = @@ -259,22 +256,23 @@ gcode_flavor = marlin high_current_on_filament_swap = 0 inherits = layer_gcode = -machine_max_acceleration_e = 10000,5000 -machine_max_acceleration_extruding = 1500,1250 -machine_max_acceleration_retracting = 1500,1250 -machine_max_acceleration_x = 9000,1000 -machine_max_acceleration_y = 9000,1000 -machine_max_acceleration_z = 100,200 -machine_max_feedrate_e = 40,120 -machine_max_feedrate_x = 800,200 -machine_max_feedrate_y = 800,200 -machine_max_feedrate_z = 8,12 -machine_max_jerk_e = 2.5,2.5 -machine_max_jerk_x = 20,10 -machine_max_jerk_y = 20,10 -machine_max_jerk_z = 0.2,0.4 -machine_min_extruding_rate = 0,0 -machine_min_travel_rate = 0,0 +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 1500 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 100 +machine_max_feedrate_e = 40 +machine_max_feedrate_x = 300 +machine_max_feedrate_y = 300 +machine_max_feedrate_z = 8 +machine_max_jerk_e = 2.5 +machine_max_jerk_x = 20 +machine_max_jerk_y = 20 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +machine_limits_usage = time_estimate_only max_layer_height = 0 max_print_height = 158 min_layer_height = 0.07 @@ -292,7 +290,7 @@ retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 -retract_speed = 40 +retract_speed = 30 silent_mode = 0 single_extruder_multi_material = 0 start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier. @@ -308,8 +306,8 @@ z_offset = 0 [printer:Taz6 Aero 0.5mm] printer_model = TAZ6_AERO printer_variant = 0.5 -default_print_profile = 0.3mm @lulzbot -default_filament_profile = PrintedSolid Jesse PLA @lulzbot +default_print_profile = 0.25mm STANDARD @lulzbot +default_filament_profile = Jessie PLA @lulzbot bed_shape = 0x0,280x0,280x280,0x280 before_layer_gcode = between_objects_gcode = @@ -324,22 +322,23 @@ gcode_flavor = marlin high_current_on_filament_swap = 0 inherits = layer_gcode = -machine_max_acceleration_e = 1000,5000 -machine_max_acceleration_extruding = 1000,1250 -machine_max_acceleration_retracting = 1000,1250 -machine_max_acceleration_x = 9000,1000 -machine_max_acceleration_y = 9000,1000 -machine_max_acceleration_z = 100,200 -machine_max_feedrate_e = 40,120 -machine_max_feedrate_x = 800,200 -machine_max_feedrate_y = 800,200 -machine_max_feedrate_z = 3,12 -machine_max_jerk_e = 2.5,2.5 -machine_max_jerk_x = 12,10 -machine_max_jerk_y = 12,10 -machine_max_jerk_z = 0.2,0.4 -machine_min_extruding_rate = 0,0 -machine_min_travel_rate = 0,0 +machine_max_acceleration_e = 1000 +machine_max_acceleration_extruding = 500 +machine_max_acceleration_retracting = 1000 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 100 +machine_max_feedrate_e = 40 +machine_max_feedrate_x = 300 +machine_max_feedrate_y = 300 +machine_max_feedrate_z = 3 +machine_max_jerk_e = 10 +machine_max_jerk_x = 8 +machine_max_jerk_y = 8 +machine_max_jerk_z = 0.4 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +machine_limits_usage = time_estimate_only max_layer_height = 0 max_print_height = 250 min_layer_height = 0.07 @@ -358,7 +357,7 @@ retract_lift_above = 0 retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 -retract_speed = 40 +retract_speed = 30 silent_mode = 0 single_extruder_multi_material = 0 start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n @@ -370,3 +369,55 @@ use_volumetric_e = 0 variable_layer_height = 1 wipe = 1 z_offset = 0 + +# [printer:Taz Workhorse 0.5mm] +# printer_model = TAZ_WORKHORSE +# printer_variant = 0.5 +# printer_technology = FFF +# default_print_profile = 0.25mm STANDARD @lulzbot +# default_filament_profile = Jessie PLA @lulzbot +# bed_shape = 0x0,280x0,280x280,0x280 +# deretract_speed = 20 +# end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG91 ; relative positioning\nG1 E-1 F300 ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000 ; lift up and retract even more filament\nG1 E6 ; re-prime extruder\nM117 Cooling please wait ; progress indicator message on LCD\nG90 ; absolute positioning\nG1 Y0 F3000 ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000 ; present finished print\nM140 S0; cool downs\nM77 ; stop GLCD timer\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n +# extra_loading_move = -2 +# extruder_colour = "" +# extruder_offset = 0x0 +# gcode_flavor = marlin +# high_current_on_filament_swap = 0 +# machine_max_acceleration_e = 3000 +# machine_max_acceleration_extruding = 500 +# machine_max_acceleration_retracting = 2000 +# machine_max_acceleration_x = 9000 +# machine_max_acceleration_y = 9000 +# machine_max_acceleration_z = 100 +# machine_max_feedrate_e = 40 +# machine_max_feedrate_x = 300 +# machine_max_feedrate_y = 300 +# machine_max_feedrate_z = 25 +# machine_max_jerk_e = 10 +# machine_max_jerk_x = 8 +# machine_max_jerk_y = 8 +# machine_max_jerk_z = 0.4 +# machine_min_extruding_rate = 0 +# machine_min_travel_rate = 0 +# machine_limits_usage = time_estimate_only +# max_layer_height = 0 +# max_print_height = 285 +# min_layer_height = 0.07 +# nozzle_diameter = 0.5 +# remaining_times = 0 +# retract_before_travel = 2 +# retract_before_wipe = 0% +# retract_layer_change = 0 +# retract_length = 2 +# retract_length_toolchange = 10 +# retract_lift = 0 +# retract_speed = 40 +# silent_mode = 0 +# single_extruder_multi_material = 0 +# start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ Workhorse with HE Tool Head\n;\n;The following lines can be uncommented for printer specific fine tuning\n;More information can be found at https://marlinfw.org/meta/gcode/\n;\n;M92 E420 ;Set Axis Steps-per-unit\n;M301 P21.0 I1.78 D61.93 ;Set Hotend PID\n;M906 E160 ;Digipot Motor Current ((875mA-750)/5+135) = 160\n;\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable previous leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 ; Home all axis\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\n;M206 X0 Y0 Z0 ; uncomment to adjust wipe position (+X ~ nozzle moves left)(+Y ~ nozzle moves forward)(+Z ~ nozzle moves down)\nG12 ; wiping sequence\nM206 X0 Y0 Z0 ; reseting stock nozzle position ### CAUTION: changing this line can affect print quality ###\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X288 Y-10 F4000; move above first probe point\nM204 S100 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; activate bed level matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ Workhorse Printing... ; progress indicator message on LCD +# use_relative_e_distances = 0 +# use_volumetric_e = 0 +# variable_layer_height = 1 +# wipe = 1 +# z_offset = 0