3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Merged with dev

Browse source
This commit is contained in:
bubnikv 2018-09-12 11:59:02 +02:00
commit 0235f1a821
1491 changed files with 514153 additions and 29226 deletions
Download patch file Download diff file Expand all files Collapse all files

3
t/combineinfill.t
View file

@ -57,10 +57,11 @@ plan tests => 8;
my $config = Slic3r::Config::new_from_defaults;
$config->set('layer_height', 0.2);
$config->set('first_layer_height', 0.2);
$config->set('nozzle_diameter', [0.5]);
$config->set('nozzle_diameter', [0.5,0.5,0.5,0.5]);
$config->set('infill_every_layers', 2);
$config->set('perimeter_extruder', 1);
$config->set('infill_extruder', 2);
$config->set('wipe_into_infill', 0);
$config->set('support_material_extruder', 3);
$config->set('support_material_interface_extruder', 3);
$config->set('top_solid_layers', 0);

7
t/cooling.t
View file

@ -2,7 +2,7 @@ use Test::More;
use strict;
use warnings;
plan tests => 15;
plan tests => 14;
BEGIN {
use FindBin;
@ -79,6 +79,7 @@ $config->set('disable_fan_first_layers', [ 0 ]);
"G1 X50 F2500\n" .
"G1 F3000;_EXTRUDE_SET_SPEED\n" .
"G1 X100 E1\n" .
";_EXTRUDE_END\n" .
"G1 E4 F400",
# Print time of $gcode.
my $print_time = 50 / (2500 / 60) + 100 / (3000 / 60) + 4 / (400 / 60);
@ -203,8 +204,8 @@ $config->set('disable_fan_first_layers', [ 0 ]);
ok $all_below, 'slowdown_below_layer_time is honored';
# check that all layers have at least one unaltered external perimeter speed
my $external = all { $_ > 0 } values %layer_external;
ok $external, 'slowdown_below_layer_time does not alter external perimeters';
# my $external = all { $_ > 0 } values %layer_external;
# ok $external, 'slowdown_below_layer_time does not alter external perimeters';
}
__END__

11
t/custom_gcode.t
View file

@ -1,4 +1,4 @@
use Test::More tests => 77;
use Test::More tests => 81;
use strict;
use warnings;
@ -49,7 +49,7 @@ use Slic3r::Test;
my $parser = Slic3r::GCode::PlaceholderParser->new;
my $config = Slic3r::Config::new_from_defaults;
$config->set('printer_notes', ' PRINTER_VENDOR_PRUSA3D PRINTER_MODEL_MK2 ');
$config->set('nozzle_diameter', [0.6, 0.6, 0.6, 0.6]);
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$parser->apply_config($config);
$parser->set('foo' => 0);
$parser->set('bar' => 2);
@ -71,6 +71,10 @@ use Slic3r::Test;
is $parser->process('{2*foo*(3-12)}'), '0', 'math: 2*foo*(3-12)';
is $parser->process('{2*bar*(3-12)}'), '-36', 'math: 2*bar*(3-12)';
ok abs($parser->process('{2.5*bar*(3-12)}') - -45) < 1e-7, 'math: 2.5*bar*(3-12)';
is $parser->process('{min(12, 14)}'), '12', 'math: min(12, 14)';
is $parser->process('{max(12, 14)}'), '14', 'math: max(12, 14)';
is $parser->process('{min(13.4, -1238.1)}'), '-1238.1', 'math: min(13.4, -1238.1)';
is $parser->process('{max(13.4, -1238.1)}'), '13.4', 'math: max(13.4, -1238.1)';
# Test the boolean expression parser.
is $parser->evaluate_boolean_expression('12 == 12'), 1, 'boolean expression parser: 12 == 12';
@ -123,6 +127,7 @@ use Slic3r::Test;
{
my $config = Slic3r::Config->new;
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$config->set('extruder', 2);
$config->set('first_layer_temperature', [200,205]);
@ -204,6 +209,7 @@ use Slic3r::Test;
{
my $config = Slic3r::Config->new;
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6,0.6]);
$config->set('start_gcode', qq!
;substitution:{if infill_extruder==1}if block
{elsif infill_extruder==2}elsif block 1
@ -228,6 +234,7 @@ use Slic3r::Test;
{
my $config = Slic3r::Config->new;
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$config->set('start_gcode',
';substitution:{if infill_extruder==1}{if perimeter_extruder==1}block11{else}block12{endif}' .
'{elsif infill_extruder==2}{if perimeter_extruder==1}block21{else}block22{endif}' .

5
t/fill.t
View file

@ -164,6 +164,7 @@ SKIP:
for my $pattern (qw(rectilinear honeycomb hilbertcurve concentric)) {
my $config = Slic3r::Config::new_from_defaults;
$config->set('nozzle_diameter', [0.4,0.4,0.4,0.4]);
$config->set('fill_pattern', $pattern);
$config->set('external_fill_pattern', $pattern);
$config->set('perimeters', 1);
@ -195,10 +196,12 @@ for my $pattern (qw(rectilinear honeycomb hilbertcurve concentric)) {
{
my $config = Slic3r::Config::new_from_defaults;
$config->set('nozzle_diameter', [0.4,0.4,0.4,0.4]);
$config->set('infill_only_where_needed', 1);
$config->set('bottom_solid_layers', 0);
$config->set('infill_extruder', 2);
$config->set('infill_extrusion_width', 0.5);
$config->set('wipe_into_infill', 0);
$config->set('fill_density', 40);
$config->set('cooling', [ 0 ]); # for preventing speeds from being altered
$config->set('first_layer_speed', '100%'); # for preventing speeds from being altered
@ -276,7 +279,7 @@ for my $pattern (qw(rectilinear honeycomb hilbertcurve concentric)) {
$config->set('fill_density', 0);
$config->set('layer_height', 0.2);
$config->set('first_layer_height', 0.2);
$config->set('nozzle_diameter', [0.35]);
$config->set('nozzle_diameter', [0.35,0.35,0.35,0.35]);
$config->set('infill_extruder', 2);
$config->set('solid_infill_extruder', 2);
$config->set('infill_extrusion_width', 0.52);

6
t/multi.t
View file

@ -16,6 +16,7 @@ use Slic3r::Test;
{
my $config = Slic3r::Config::new_from_defaults;
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$config->set('raft_layers', 2);
$config->set('infill_extruder', 2);
$config->set('solid_infill_extruder', 3);
@ -89,6 +90,7 @@ use Slic3r::Test;
{
my $config = Slic3r::Config::new_from_defaults;
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$config->set('support_material_extruder', 3);
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
@ -97,6 +99,7 @@ use Slic3r::Test;
{
my $config = Slic3r::Config->new;
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$config->set('extruder', 2);
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
@ -105,6 +108,7 @@ use Slic3r::Test;
{
my $config = Slic3r::Config->new;
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$config->set('perimeter_extruder', 2);
$config->set('infill_extruder', 2);
$config->set('support_material_extruder', 2);
@ -126,6 +130,7 @@ use Slic3r::Test;
$upper_config->set('bottom_solid_layers', 1);
$upper_config->set('top_solid_layers', 0);
my $config = Slic3r::Config::new_from_defaults;
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$config->set('fill_density', 0);
$config->set('solid_infill_speed', 99);
$config->set('top_solid_infill_speed', 99);
@ -172,6 +177,7 @@ use Slic3r::Test;
my $object = $model->objects->[0];
my $config = Slic3r::Config::new_from_defaults;
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$config->set('layer_height', 0.4);
$config->set('first_layer_height', '100%');
$config->set('skirts', 0);

8
t/perimeters.t
View file

@ -175,7 +175,7 @@ use Slic3r::Test;
if ($info->{extruding} && $info->{dist_XY} > 0) {
$cur_loop ||= [ [$self->X, $self->Y] ];
push @$cur_loop, [ @$info{qw(new_X new_Y)} ];
} else {
} elsif ($cmd ne 'M73') { # skips remaining time lines (M73)
if ($cur_loop) {
$has_cw_loops = 1 if Slic3r::Polygon->new(@$cur_loop)->is_clockwise;
$cur_loop = undef;
@ -201,7 +201,7 @@ use Slic3r::Test;
if ($info->{extruding} && $info->{dist_XY} > 0) {
$cur_loop ||= [ [$self->X, $self->Y] ];
push @$cur_loop, [ @$info{qw(new_X new_Y)} ];
} else {
} elsif ($cmd ne 'M73') { # skips remaining time lines (M73)
if ($cur_loop) {
$has_cw_loops = 1 if Slic3r::Polygon->new_scale(@$cur_loop)->is_clockwise;
if ($self->F == $config->external_perimeter_speed*60) {
@ -306,7 +306,7 @@ use Slic3r::Test;
if ($info->{extruding} && $info->{dist_XY} > 0 && ($args->{F} // $self->F) == $config->perimeter_speed*60) {
$perimeters{$self->Z}++ if !$in_loop;
$in_loop = 1;
} else {
} elsif ($cmd ne 'M73') { # skips remaining time lines (M73)
$in_loop = 0;
}
});
@ -430,7 +430,7 @@ use Slic3r::Test;
push @seam_points, Slic3r::Point->new_scale($self->X, $self->Y);
}
$was_extruding = 1;
} else {
} elsif ($cmd ne 'M73') { # skips remaining time lines (M73)
$was_extruding = 0;
}
});

4
t/retraction.t
View file

@ -95,6 +95,7 @@ use Slic3r::Test qw(_eq);
1;
};
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$config->set('first_layer_height', $config->layer_height);
$config->set('first_layer_speed', '100%');
$config->set('start_gcode', ''); # to avoid dealing with the nozzle lift in start G-code
@ -207,6 +208,7 @@ use Slic3r::Test qw(_eq);
{
my $config = Slic3r::Config::new_from_defaults;
$config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
$config->set('start_gcode', '');
$config->set('retract_lift', [3, 4]);
@ -255,4 +257,4 @@ use Slic3r::Test qw(_eq);
'Z is not lifted above the configured value for 2. extruder';
}
__END__
__END__