From 0787fa861a1cc513ac1a314ab1ab3fbab56be7cc Mon Sep 17 00:00:00 2001
From: bubnikv <bubnikv@gmail.com>
Date: Mon, 13 May 2019 18:01:00 +0200
Subject: [PATCH] Updated handling of the SLIC3R_BUILD_ID key

---
 resources/localization/Slic3rPE.pot  | 7631 --------------------------
 src/PrusaSlicer.cpp                  |    2 +-
 src/libslic3r/libslic3r_version.h.in |    2 +-
 src/slic3r/GUI/MainFrame.cpp         |    2 +-
 src/slic3r/GUI/SysInfoDialog.cpp     |    2 +-
 version.inc                          |    3 +-
 xs/xsp/XS.xsp                        |    2 +-
 7 files changed, 6 insertions(+), 7638 deletions(-)
 delete mode 100644 resources/localization/Slic3rPE.pot

diff --git a/resources/localization/Slic3rPE.pot b/resources/localization/Slic3rPE.pot
deleted file mode 100644
index 1fbea57e5..000000000
--- a/resources/localization/Slic3rPE.pot
+++ /dev/null
@@ -1,7631 +0,0 @@
-# SOME DESCRIPTIVE TITLE.
-# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
-# This file is distributed under the same license as the PACKAGE package.
-# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
-#
-#, fuzzy
-msgid ""
-msgstr ""
-"Project-Id-Version: PACKAGE VERSION\n"
-"Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2019-05-11 23:33+0200\n"
-"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
-"Language-Team: LANGUAGE <LL@li.org>\n"
-"Language: \n"
-"MIME-Version: 1.0\n"
-"Content-Type: text/plain; charset=UTF-8\n"
-"Content-Transfer-Encoding: 8bit\n"
-
-#: src/slic3r/GUI/AboutDialog.cpp:35
-#, possible-c-format
-msgid "About %s"
-msgstr ""
-
-#: src/slic3r/GUI/AboutDialog.cpp:67 src/slic3r/GUI/MainFrame.cpp:59
-msgid "Version"
-msgstr ""
-
-#: src/slic3r/GUI/AboutDialog.cpp:92
-msgid "Copyright"
-msgstr ""
-
-#. TRN "Slic3r _is licensed under the_ License"
-#: src/slic3r/GUI/AboutDialog.cpp:94
-msgid "is licensed under the"
-msgstr ""
-
-#: src/slic3r/GUI/AboutDialog.cpp:95
-msgid "GNU Affero General Public License, version 3"
-msgstr ""
-
-#: src/slic3r/GUI/AboutDialog.cpp:96
-msgid ""
-"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
-"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
-"numerous others."
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:400
-msgid "Copying of the temporary G-code to the output G-code failed"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:398
-msgid "Running post-processing scripts"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:87
-msgid "G-code file exported to %1%"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:91
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:109
-msgid "Slicing complete"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:105
-msgid "Masked SLA file exported to %1%"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:409
-msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:60
-msgid "Shape"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:68
-msgid "Rectangular"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:72
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:137
-#: src/slic3r/GUI/Tab.cpp:2263
-msgid "Size"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:73
-msgid "Size in X and Y of the rectangular plate."
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:79
-msgid "Origin"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:80
-msgid ""
-"Distance of the 0,0 G-code coordinate from the front left corner of the "
-"rectangle."
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:84
-msgid "Circular"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:87 src/slic3r/GUI/ConfigWizard.cpp:118
-#: src/slic3r/GUI/ConfigWizard.cpp:565 src/slic3r/GUI/ConfigWizard.cpp:579
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:229
-#: src/slic3r/GUI/WipeTowerDialog.cpp:84 src/libslic3r/PrintConfig.cpp:60
-#: src/libslic3r/PrintConfig.cpp:67 src/libslic3r/PrintConfig.cpp:76
-#: src/libslic3r/PrintConfig.cpp:211 src/libslic3r/PrintConfig.cpp:286
-#: src/libslic3r/PrintConfig.cpp:294 src/libslic3r/PrintConfig.cpp:344
-#: src/libslic3r/PrintConfig.cpp:354 src/libslic3r/PrintConfig.cpp:474
-#: src/libslic3r/PrintConfig.cpp:485 src/libslic3r/PrintConfig.cpp:503
-#: src/libslic3r/PrintConfig.cpp:681 src/libslic3r/PrintConfig.cpp:1191
-#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1270
-#: src/libslic3r/PrintConfig.cpp:1288 src/libslic3r/PrintConfig.cpp:1340
-#: src/libslic3r/PrintConfig.cpp:1350 src/libslic3r/PrintConfig.cpp:1471
-#: src/libslic3r/PrintConfig.cpp:1479 src/libslic3r/PrintConfig.cpp:1520
-#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1538
-#: src/libslic3r/PrintConfig.cpp:1546 src/libslic3r/PrintConfig.cpp:1554
-#: src/libslic3r/PrintConfig.cpp:1637 src/libslic3r/PrintConfig.cpp:1853
-#: src/libslic3r/PrintConfig.cpp:1923 src/libslic3r/PrintConfig.cpp:1957
-#: src/libslic3r/PrintConfig.cpp:2150 src/libslic3r/PrintConfig.cpp:2157
-#: src/libslic3r/PrintConfig.cpp:2164 src/libslic3r/PrintConfig.cpp:2194
-#: src/libslic3r/PrintConfig.cpp:2204 src/libslic3r/PrintConfig.cpp:2214
-#: src/libslic3r/PrintConfig.cpp:2322 src/libslic3r/PrintConfig.cpp:2397
-#: src/libslic3r/PrintConfig.cpp:2406 src/libslic3r/PrintConfig.cpp:2415
-#: src/libslic3r/PrintConfig.cpp:2425 src/libslic3r/PrintConfig.cpp:2469
-#: src/libslic3r/PrintConfig.cpp:2479 src/libslic3r/PrintConfig.cpp:2498
-#: src/libslic3r/PrintConfig.cpp:2508 src/libslic3r/PrintConfig.cpp:2517
-#: src/libslic3r/PrintConfig.cpp:2535 src/libslic3r/PrintConfig.cpp:2550
-#: src/libslic3r/PrintConfig.cpp:2564 src/libslic3r/PrintConfig.cpp:2577
-#: src/libslic3r/PrintConfig.cpp:2587
-msgid "mm"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:88 src/libslic3r/PrintConfig.cpp:678
-msgid "Diameter"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:89
-msgid ""
-"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
-"center."
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:93 src/slic3r/GUI/GUI_Preview.cpp:239
-#: src/libslic3r/GCode/PreviewData.cpp:175
-msgid "Custom"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:97
-msgid "Load shape from STL..."
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:143
-msgid "Settings"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:316
-msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/GUI_ObjectList.cpp:1443
-msgid "Error!"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:342
-msgid "The selected file contains no geometry."
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:346
-msgid ""
-"The selected file contains several disjoint areas. This is not supported."
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.hpp:45 src/slic3r/GUI/ConfigWizard.cpp:530
-msgid "Bed Shape"
-msgstr ""
-
-#: src/slic3r/GUI/BonjourDialog.cpp:55
-msgid "Network lookup"
-msgstr ""
-
-#: src/slic3r/GUI/BonjourDialog.cpp:72
-msgid "Address"
-msgstr ""
-
-#: src/slic3r/GUI/BonjourDialog.cpp:73
-msgid "Hostname"
-msgstr ""
-
-#: src/slic3r/GUI/BonjourDialog.cpp:74
-msgid "Service name"
-msgstr ""
-
-#: src/slic3r/GUI/BonjourDialog.cpp:76
-msgid "OctoPrint version"
-msgstr ""
-
-#: src/slic3r/GUI/BonjourDialog.cpp:218
-msgid "Searching for devices"
-msgstr ""
-
-#: src/slic3r/GUI/BonjourDialog.cpp:225
-msgid "Finished"
-msgstr ""
-
-#: src/slic3r/GUI/ButtonsDescription.cpp:16
-msgid "Buttons And Text Colors Description"
-msgstr ""
-
-#: src/slic3r/GUI/ButtonsDescription.cpp:36
-msgid "Value is the same as the system value"
-msgstr ""
-
-#: src/slic3r/GUI/ButtonsDescription.cpp:53
-msgid ""
-"Value was changed and is not equal to the system value or the last saved "
-"preset"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
-msgid "Upgrade"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
-msgid "Downgrade"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
-msgid "Before roll back"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
-msgid "User"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
-msgid "Unknown"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:39
-msgid "Active"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45
-msgid "slic3r version"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 src/slic3r/GUI/Preset.cpp:1274
-msgid "print"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:47
-msgid "filaments"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:48 src/slic3r/GUI/Preset.cpp:1278
-msgid "printer"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 src/slic3r/GUI/Tab.cpp:932
-msgid "vendor"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
-msgid "version"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
-msgid "min slic3r version"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
-msgid "max slic3r version"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
-msgid "model"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
-msgid "variants"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:70
-#, possible-c-format
-msgid "Incompatible with this %s"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:73
-msgid "Activate"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:99
-msgid "Configuration Snapshots"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:118
-msgid "nozzle"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:122
-msgid "Alternate nozzles:"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:188
-msgid "All standard"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:189 src/slic3r/GUI/Tab.cpp:3006
-msgid "All"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:190 src/slic3r/GUI/Plater.cpp:433
-#: src/libslic3r/GCode/PreviewData.cpp:162
-msgid "None"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:296
-#, possible-c-format
-msgid "Welcome to the %s Configuration Assistant"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:298
-#, possible-c-format
-msgid "Welcome to the %s Configuration Wizard"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:300
-msgid "Welcome"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:304 src/slic3r/GUI/GUI_App.cpp:707
-#, possible-c-format
-msgid "Run %s"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:306
-#, possible-c-format
-msgid ""
-"Hello, welcome to %s! This %s helps you with the initial configuration; just "
-"a few settings and you will be ready to print."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:311
-msgid ""
-"Remove user profiles - install from scratch (a snapshot will be taken "
-"beforehand)"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:342
-#, possible-c-format
-msgid "%s Family"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:379
-msgid "Custom Printer Setup"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:379
-msgid "Custom Printer"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:381
-msgid "Define a custom printer profile"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:383
-msgid "Custom profile name:"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:407
-msgid "Automatic updates"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:407
-msgid "Updates"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:415 src/slic3r/GUI/Preferences.cpp:61
-msgid "Check for application updates"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:419
-#, possible-c-format
-msgid ""
-"If enabled, %s checks for new application versions online. When a new "
-"version becomes available, a notification is displayed at the next "
-"application startup (never during program usage). This is only a "
-"notification mechanisms, no automatic installation is done."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:425 src/slic3r/GUI/Preferences.cpp:69
-msgid "Update built-in Presets automatically"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:429
-#, possible-c-format
-msgid ""
-"If enabled, %s downloads updates of built-in system presets in the "
-"background.These updates are downloaded into a separate temporary location."
-"When a new preset version becomes available it is offered at application "
-"startup."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:432
-msgid ""
-"Updates are never applied without user's consent and never overwrite user's "
-"customized settings."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:437
-msgid ""
-"Additionally a backup snapshot of the whole configuration is created before "
-"an update is applied."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:444
-msgid "Other Vendors"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:446
-#, possible-c-format
-msgid "Pick another vendor supported by %s:"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:492
-msgid "Firmware Type"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:492 src/slic3r/GUI/Tab.cpp:1926
-msgid "Firmware"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:496
-msgid "Choose the type of firmware used by your printer."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:530
-msgid "Bed Shape and Size"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:533
-msgid "Set the shape of your printer's bed."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:547
-msgid "Filament and Nozzle Diameters"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:547
-msgid "Print Diameters"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:561
-msgid "Enter the diameter of your printer's hot end nozzle."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:564
-msgid "Nozzle Diameter:"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:574
-msgid "Enter the diameter of your filament."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:575
-msgid ""
-"Good precision is required, so use a caliper and do multiple measurements "
-"along the filament, then compute the average."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:578
-msgid "Filament Diameter:"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:596
-msgid "Extruder and Bed Temperatures"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:596
-msgid "Temperatures"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:612
-msgid "Enter the temperature needed for extruding your filament."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:613
-msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:616
-msgid "Extrusion Temperature:"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:617 src/slic3r/GUI/ConfigWizard.cpp:631
-msgid "°C"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:626
-msgid ""
-"Enter the bed temperature needed for getting your filament to stick to your "
-"heated bed."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:627
-msgid ""
-"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
-"no heated bed."
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:630
-msgid "Bed Temperature:"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1093
-msgid "Select all standard printers"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1096
-msgid "< &Back"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1097
-msgid "&Next >"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1098
-msgid "&Finish"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1099 src/slic3r/GUI/FirmwareDialog.cpp:147
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:37
-#: src/slic3r/GUI/ProgressStatusBar.cpp:28
-msgid "Cancel"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1113
-msgid "Prusa FFF Technology Printers"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1116
-msgid "Prusa MSLA Technology Printers"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1185
-msgid "Configuration Assistant"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1186
-msgid "Configuration &Assistant"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1188
-msgid "Configuration Wizard"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:1189
-msgid "Configuration &Wizard"
-msgstr ""
-
-#: src/slic3r/GUI/Field.cpp:117
-msgid "default value"
-msgstr ""
-
-#: src/slic3r/GUI/Field.cpp:120
-msgid "parameter name"
-msgstr ""
-
-#: src/slic3r/GUI/Field.cpp:148
-#, possible-c-format
-msgid "%s doesn't support percentage"
-msgstr ""
-
-#: src/slic3r/GUI/Field.cpp:162 src/slic3r/GUI/Field.cpp:185
-msgid "Invalid numeric input."
-msgstr ""
-
-#: src/slic3r/GUI/Field.cpp:167
-msgid "Input value is out of range"
-msgstr ""
-
-#: src/slic3r/GUI/Field.cpp:193
-#, possible-c-format
-msgid ""
-"Do you mean %d%% instead of %d %s?\n"
-"Select YES if you want to change this value to %d%%, \n"
-"or NO if you are sure that %d %s is a correct value."
-msgstr ""
-
-#: src/slic3r/GUI/Field.cpp:196
-msgid "Parameter validation"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:146
-msgid "Flash!"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:148
-msgid "Flashing in progress. Please do not disconnect the printer!"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:192
-msgid "Flashing failed"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:273
-msgid "Flashing succeeded!"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:274
-msgid "Flashing failed. Please see the avrdude log below."
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:275
-msgid "Flashing cancelled."
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:313
-#, possible-c-format
-msgid ""
-"This firmware hex file does not match the printer model.\n"
-"The hex file is intended for: %s\n"
-"Printer reported: %s\n"
-"\n"
-"Do you want to continue and flash this hex file anyway?\n"
-"Please only continue if you are sure this is the right thing to do."
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:400 src/slic3r/GUI/FirmwareDialog.cpp:436
-#, possible-c-format
-msgid ""
-"Multiple %s devices found. Please only connect one at a time for flashing."
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:417
-#, possible-c-format
-msgid ""
-"The %s device was not found.\n"
-"If the device is connected, please press the Reset button next to the USB "
-"connector ..."
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:530
-#, possible-c-format
-msgid "The %s device could not have been found"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:608
-#, possible-c-format
-msgid "Error accessing port at %s: %s"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:610
-#, possible-c-format
-msgid "Error: %s"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:740
-msgid "Firmware flasher"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:765
-msgid "Firmware image:"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:768 src/slic3r/GUI/Tab.cpp:1687
-#: src/slic3r/GUI/Tab.cpp:1743
-msgid "Browse"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:770
-msgid "Serial port:"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:772
-msgid "Autodetected"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:773
-msgid "Rescan"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:780
-msgid "Progress:"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:783
-msgid "Status:"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:784
-msgid "Ready"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:804
-msgid "Advanced: Output log"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:815
-#: src/slic3r/GUI/PrintHostDialogs.cpp:160
-msgid "Close"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:863
-msgid ""
-"Are you sure you want to cancel firmware flashing?\n"
-"This could leave your printer in an unusable state!"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:864
-msgid "Confirmation"
-msgstr ""
-
-#: src/slic3r/GUI/FirmwareDialog.cpp:867
-msgid "Cancelling..."
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:720
-msgid "An object outside the print area was detected"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:721
-msgid "A toolpath outside the print area was detected"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:722
-msgid "SLA supports outside the print area were detected"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:723
-msgid "Some objects are not visible when editing supports"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:725
-msgid ""
-"An object outside the print area was detected\n"
-"Resolve the current problem to continue slicing"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:1694
-msgid "Last frame"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:1698
-msgid "ms"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3434
-msgid "Add..."
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3444 src/slic3r/GUI/GUI_ObjectList.cpp:1269
-#: src/slic3r/GUI/Plater.cpp:2933 src/slic3r/GUI/Plater.cpp:2951
-#: src/slic3r/GUI/Tab.cpp:2956
-msgid "Delete"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3455 src/slic3r/GUI/Plater.cpp:3341
-msgid "Delete all"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3466 src/slic3r/GUI/KBShortcutsDialog.cpp:135
-msgid "Arrange"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3480
-msgid "Copy"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3491
-msgid "Paste"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3505
-msgid "Add instance"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3517
-msgid "Remove instance"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3532
-msgid "Split to objects"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3544 src/slic3r/GUI/GUI_ObjectList.cpp:1122
-msgid "Split to parts"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:3559
-msgid "Layers editing"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:35
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195
-msgid "Rotate lower part upwards"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:36
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:198
-msgid "Perform cut"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:43
-msgid "Cut object:"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:88
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 src/libslic3r/PrintConfig.cpp:3039
-msgid "Cut"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193
-msgid "Keep upper part"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194
-msgid "Keep lower part"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:32
-msgid "Place on face"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:51
-msgid "Move"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
-msgid "Position (mm)"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
-msgid "Displacement (mm)"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:458
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:324
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:342
-#: src/libslic3r/PrintConfig.cpp:3088
-msgid "Rotate"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:491
-msgid "Rotation (deg)"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:51
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:231
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:325
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:343
-#: src/libslic3r/PrintConfig.cpp:3103
-msgid "Scale"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:276
-msgid "Scale (%)"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:840
-msgid "Head diameter"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:853
-msgid "Lock supports under new islands"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:857
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1239
-msgid "Remove selected points"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:861
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:914
-msgid "Remove all points"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:866
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1242
-msgid "Apply changes"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:871
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1243
-msgid "Discard changes"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:879
-msgid "Minimal points distance"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:890
-#: src/libslic3r/PrintConfig.cpp:2524
-msgid "Support points density"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:904
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1245
-msgid "Auto-generate points"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:910
-msgid "Manual editing"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:928
-msgid "Clipping of view"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:930
-msgid "Reset direction"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:997
-msgid "SLA Support Points"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1024
-msgid "Do you want to save your manually edited support points?"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1025
-msgid "Save changes?"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1168
-msgid ""
-"Autogeneration will erase all manually edited points.\n"
-"\n"
-"Are you sure you want to do it?\n"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1170 src/slic3r/GUI/GUI.cpp:283
-#: src/slic3r/GUI/WipeTowerDialog.cpp:44 src/slic3r/GUI/WipeTowerDialog.cpp:328
-msgid "Warning"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1202
-msgid "SLA gizmo keyboard shortcuts"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
-msgid "Note: some shortcuts work in (non)editing mode only."
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235
-msgid "Left click"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
-msgid "Add point"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
-msgid "Right click"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
-msgid "Remove point"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
-msgid "Drag"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
-msgid "Move point"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234
-msgid "Add point to selection"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235
-msgid "Remove point from selection"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
-msgid "Select by rectangle"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
-msgid "Deselect by rectangle"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1238
-msgid "Select all points"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240
-msgid "Mouse wheel"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240
-msgid "Move clipping plane"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1241
-msgid "Reset clipping plane"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1244
-msgid "Switch to editing mode"
-msgstr ""
-
-#: src/slic3r/GUI/GUI.cpp:142 src/slic3r/GUI/Tab.cpp:2815
-msgid "It's impossible to print multi-part object(s) with SLA technology."
-msgstr ""
-
-#: src/slic3r/GUI/GUI.cpp:143
-msgid "Please check and fix your object list."
-msgstr ""
-
-#: src/slic3r/GUI/GUI.cpp:144 src/slic3r/GUI/Tab.cpp:2817
-msgid "Attention!"
-msgstr ""
-
-#: src/slic3r/GUI/GUI.cpp:277
-msgid "Notice"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:393
-msgid "Changing of an application language"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:401 src/slic3r/GUI/GUI_App.cpp:410
-msgid "Recreating"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:414
-msgid "Loading of current presets"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:422
-msgid "Loading of a mode view"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:504
-msgid "Choose one file (3MF):"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:516
-msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:558
-msgid "Select the language"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:559
-msgid "Language"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:710
-msgid "&Configuration Snapshots"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:710
-msgid "Inspect / activate configuration snapshots"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:711
-msgid "Take Configuration &Snapshot"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:711
-msgid "Capture a configuration snapshot"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:714
-msgid "&Preferences"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:720
-msgid "Application preferences"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:723 src/slic3r/GUI/wxExtensions.cpp:2509
-msgid "Simple"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:723
-msgid "Simple View Mode"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:724 src/slic3r/GUI/GUI_ObjectList.cpp:85
-#: src/slic3r/GUI/GUI_ObjectList.cpp:539 src/slic3r/GUI/Tab.cpp:1030
-#: src/slic3r/GUI/Tab.cpp:1045 src/slic3r/GUI/Tab.cpp:1143
-#: src/slic3r/GUI/Tab.cpp:1146 src/slic3r/GUI/Tab.cpp:1520
-#: src/slic3r/GUI/Tab.cpp:1946 src/slic3r/GUI/Tab.cpp:3460
-#: src/slic3r/GUI/wxExtensions.cpp:2510 src/libslic3r/PrintConfig.cpp:73
-#: src/libslic3r/PrintConfig.cpp:188 src/libslic3r/PrintConfig.cpp:351
-#: src/libslic3r/PrintConfig.cpp:989 src/libslic3r/PrintConfig.cpp:2200
-msgid "Advanced"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:724
-msgid "Advanced View Mode"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:725 src/slic3r/GUI/wxExtensions.cpp:2511
-msgid "Expert"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:725
-msgid "Expert View Mode"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:730
-msgid "Mode"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:730
-#, possible-c-format
-msgid "%s View Mode"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:732
-msgid "Change Application &Language"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:734
-msgid "Flash printer &firmware"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:734
-msgid "Upload a firmware image into an Arduino based printer"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:746
-msgid "Taking configuration snapshot"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:746
-msgid "Snapshot name"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:789
-msgid ""
-"Switching the language will trigger application restart.\n"
-"You will lose content of the plater."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:791
-msgid "Do you want to proceed?"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:792
-msgid "Language selection"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:811
-msgid "&Configuration"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:831
-msgid "The presets on the following tabs were modified"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:831 src/slic3r/GUI/Tab.cpp:2803
-msgid "Discard changes and continue anyway?"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:832
-msgid "Unsaved Presets"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:28 src/slic3r/GUI/GUI_ObjectList.cpp:77
-#: src/slic3r/GUI/GUI_ObjectList.cpp:531 src/libslic3r/PrintConfig.cpp:57
-#: src/libslic3r/PrintConfig.cpp:151 src/libslic3r/PrintConfig.cpp:382
-#: src/libslic3r/PrintConfig.cpp:439 src/libslic3r/PrintConfig.cpp:447
-#: src/libslic3r/PrintConfig.cpp:843 src/libslic3r/PrintConfig.cpp:1027
-#: src/libslic3r/PrintConfig.cpp:1330 src/libslic3r/PrintConfig.cpp:1396
-#: src/libslic3r/PrintConfig.cpp:1577 src/libslic3r/PrintConfig.cpp:2012
-#: src/libslic3r/PrintConfig.cpp:2069
-msgid "Layers and Perimeters"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:29 src/slic3r/GUI/GUI_ObjectList.cpp:78
-#: src/slic3r/GUI/GUI_ObjectList.cpp:532 src/slic3r/GUI/Plater.cpp:447
-#: src/slic3r/GUI/Tab.cpp:1034 src/slic3r/GUI/Tab.cpp:1035
-#: src/slic3r/GUI/Tab.cpp:1364 src/libslic3r/PrintConfig.cpp:168
-#: src/libslic3r/PrintConfig.cpp:390 src/libslic3r/PrintConfig.cpp:730
-#: src/libslic3r/PrintConfig.cpp:744 src/libslic3r/PrintConfig.cpp:781
-#: src/libslic3r/PrintConfig.cpp:934 src/libslic3r/PrintConfig.cpp:944
-#: src/libslic3r/PrintConfig.cpp:962 src/libslic3r/PrintConfig.cpp:980
-#: src/libslic3r/PrintConfig.cpp:999 src/libslic3r/PrintConfig.cpp:1684
-#: src/libslic3r/PrintConfig.cpp:1701
-msgid "Infill"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:30 src/slic3r/GUI/GUI_ObjectList.cpp:79
-#: src/slic3r/GUI/GUI_ObjectList.cpp:533 src/slic3r/GUI/GUI_Preview.cpp:236
-#: src/slic3r/GUI/Tab.cpp:1063 src/slic3r/GUI/Tab.cpp:1064
-#: src/libslic3r/PrintConfig.cpp:335 src/libslic3r/PrintConfig.cpp:1457
-#: src/libslic3r/PrintConfig.cpp:1805 src/libslic3r/PrintConfig.cpp:1811
-#: src/libslic3r/PrintConfig.cpp:1819 src/libslic3r/PrintConfig.cpp:1831
-#: src/libslic3r/PrintConfig.cpp:1841 src/libslic3r/PrintConfig.cpp:1849
-#: src/libslic3r/PrintConfig.cpp:1864 src/libslic3r/PrintConfig.cpp:1885
-#: src/libslic3r/PrintConfig.cpp:1896 src/libslic3r/PrintConfig.cpp:1912
-#: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1930
-#: src/libslic3r/PrintConfig.cpp:1941 src/libslic3r/PrintConfig.cpp:1955
-#: src/libslic3r/PrintConfig.cpp:1963 src/libslic3r/PrintConfig.cpp:1964
-#: src/libslic3r/PrintConfig.cpp:1973 src/libslic3r/PrintConfig.cpp:1981
-#: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/GCode/PreviewData.cpp:172
-msgid "Support material"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_ObjectList.cpp:81
-#: src/slic3r/GUI/GUI_ObjectList.cpp:535 src/slic3r/GUI/Tab.cpp:1123
-#: src/slic3r/GUI/Tab.cpp:1850 src/libslic3r/PrintConfig.cpp:457
-#: src/libslic3r/PrintConfig.cpp:955 src/libslic3r/PrintConfig.cpp:1365
-#: src/libslic3r/PrintConfig.cpp:1693 src/libslic3r/PrintConfig.cpp:1877
-#: src/libslic3r/PrintConfig.cpp:1903 src/libslic3r/PrintConfig.cpp:2176
-#: src/libslic3r/PrintConfig.cpp:2184
-msgid "Extruders"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:39
-msgid "Pad and Support"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:45
-msgid "Add part"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:46
-msgid "Add modifier"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:47
-msgid "Add support enforcer"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:48
-msgid "Add support blocker"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:80 src/slic3r/GUI/GUI_ObjectList.cpp:534
-#: src/slic3r/GUI/GUI_Preview.cpp:215 src/slic3r/GUI/Tab.cpp:1088
-#: src/libslic3r/PrintConfig.cpp:200 src/libslic3r/PrintConfig.cpp:427
-#: src/libslic3r/PrintConfig.cpp:872 src/libslic3r/PrintConfig.cpp:1000
-#: src/libslic3r/PrintConfig.cpp:1386 src/libslic3r/PrintConfig.cpp:1623
-#: src/libslic3r/PrintConfig.cpp:1672 src/libslic3r/PrintConfig.cpp:1723
-#: src/libslic3r/PrintConfig.cpp:2054
-msgid "Speed"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:82 src/slic3r/GUI/GUI_ObjectList.cpp:536
-#: src/libslic3r/PrintConfig.cpp:417 src/libslic3r/PrintConfig.cpp:524
-#: src/libslic3r/PrintConfig.cpp:831 src/libslic3r/PrintConfig.cpp:963
-#: src/libslic3r/PrintConfig.cpp:1374 src/libslic3r/PrintConfig.cpp:1713
-#: src/libslic3r/PrintConfig.cpp:1886 src/libslic3r/PrintConfig.cpp:2043
-msgid "Extrusion Width"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:87 src/slic3r/GUI/GUI_ObjectList.cpp:541
-#: src/slic3r/GUI/Plater.cpp:429 src/slic3r/GUI/Tab.cpp:3422
-#: src/slic3r/GUI/Tab.cpp:3423 src/libslic3r/PrintConfig.cpp:2388
-#: src/libslic3r/PrintConfig.cpp:2395 src/libslic3r/PrintConfig.cpp:2404
-#: src/libslic3r/PrintConfig.cpp:2413 src/libslic3r/PrintConfig.cpp:2423
-#: src/libslic3r/PrintConfig.cpp:2449 src/libslic3r/PrintConfig.cpp:2456
-#: src/libslic3r/PrintConfig.cpp:2467 src/libslic3r/PrintConfig.cpp:2477
-#: src/libslic3r/PrintConfig.cpp:2486 src/libslic3r/PrintConfig.cpp:2496
-#: src/libslic3r/PrintConfig.cpp:2505 src/libslic3r/PrintConfig.cpp:2515
-#: src/libslic3r/PrintConfig.cpp:2525 src/libslic3r/PrintConfig.cpp:2533
-msgid "Supports"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:88 src/slic3r/GUI/GUI_ObjectList.cpp:542
-#: src/slic3r/GUI/Tab.cpp:3450 src/slic3r/GUI/Tab.cpp:3451
-#: src/libslic3r/PrintConfig.cpp:2541 src/libslic3r/PrintConfig.cpp:2548
-#: src/libslic3r/PrintConfig.cpp:2562 src/libslic3r/PrintConfig.cpp:2572
-#: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2594
-msgid "Pad"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:203
-msgid "Name"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:257
-#, possible-c-format
-msgid "Auto-repaired (%d errors):\n"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:264
-msgid "degenerate facets"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:265
-msgid "edges fixed"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:266
-msgid "facets removed"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:267
-msgid "facets added"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:268
-msgid "facets reversed"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:269
-msgid "backwards edges"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:277
-msgid "Right button click the icon to fix STL through Netfabb"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:306
-msgid "Right button click the icon to change the object settings"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:357 src/slic3r/GUI/GUI_ObjectList.cpp:378
-#: src/slic3r/GUI/GUI_ObjectList.cpp:390 src/slic3r/GUI/GUI_ObjectList.cpp:2855
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2865
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2897 src/slic3r/GUI/wxExtensions.cpp:499
-#: src/slic3r/GUI/wxExtensions.cpp:524
-msgid "default"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:362 src/slic3r/GUI/Tab.cpp:1484
-#: src/libslic3r/PrintConfig.cpp:456
-msgid "Extruder"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:876 src/slic3r/GUI/GUI_ObjectList.cpp:1151
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1157
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1389
-#, possible-c-format
-msgid "Quick Add Settings (%s)"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:939
-msgid "Select showing settings"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1072
-msgid "Load"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1102
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1105
-msgid "Box"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
-msgid "Cylinder"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
-msgid "Sphere"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
-msgid "Slab"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1130
-msgid "Add settings"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1197
-msgid "Change type"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1204
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1343
-msgid "Set as a Separated Object"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1212
-msgid "Rename"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1222
-msgid "Fix through the Netfabb"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1231 src/slic3r/GUI/Plater.cpp:2969
-msgid "Export as STL"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1238
-msgid "Change extruder"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1257 src/libslic3r/PrintConfig.cpp:300
-msgid "Default"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1263
-msgid "Select new extruder for the object/part"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1343
-msgid "Set as a Separated Objects"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1556
-msgid "Generic"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1699
-msgid "You can't delete the last solid part from object."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1716
-msgid "You can't delete the last intance from object."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1742 src/slic3r/GUI/Plater.cpp:2306
-msgid ""
-"The selected object couldn't be split because it contains only one part."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1851
-msgid "Group manipulation"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1863
-msgid "Object manipulation"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1873
-msgid "Object Settings to modify"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1877
-msgid "Part Settings to modify"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1886
-msgid "Part manipulation"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1892
-msgid "Instance manipulation"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2417
-msgid "Object or Instance"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2417
-msgid "Part"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2419
-msgid "Unsupported selection"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2420
-#, possible-c-format
-msgid "You started your selection with %s Item."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2421
-#, possible-c-format
-msgid "In this mode you can select only other %s Items%s"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2424
-msgid "of a current Object"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2429
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2502 src/slic3r/GUI/Plater.cpp:118
-msgid "Info"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2543
-msgid "You can't change a type of the last solid part of the object."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2550
-msgid "Select type of part"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2714
-msgid "Enter new name"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2714
-msgid "Renaming"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2730
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2824 src/slic3r/GUI/Tab.cpp:3303
-#: src/slic3r/GUI/Tab.cpp:3307
-msgid "The supplied name is not valid;"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2731
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2825 src/slic3r/GUI/Tab.cpp:3304
-msgid "the following characters are not allowed:"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2845
-msgid "Set extruder for selected items"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2846
-msgid "Select extruder number for selected objects and/or parts"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2859
-msgid "Select extruder number:"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2860
-msgid "This extruder will be set for selected items"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:40
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:83
-msgid "World coordinates"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:41
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:84
-msgid "Local coordinates"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:60
-msgid "Select coordinate space, in which the transformation will be performed."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:102
-msgid "Object Manipulation"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153
-msgid "Object name"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:229
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:282
-msgid "Position"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:283
-msgid "Rotation"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284
-msgid "Scale factors"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
-msgid "Translate"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640
-msgid ""
-"The currently manipulated object is tilted (rotation angles are not "
-"multiples of 90°).\n"
-"Non-uniform scaling of tilted objects is only possible in the World "
-"coordinate system,\n"
-"once the rotation is embedded into the object coordinates."
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:643
-msgid ""
-"This operation is irreversible.\n"
-"Do you want to proceed?"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:58
-msgid "Additional Settings"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:83
-msgid "Remove parameter"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:209
-msgid "View"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:212 src/slic3r/GUI/GUI_Preview.cpp:537
-#: src/libslic3r/GCode/PreviewData.cpp:394
-msgid "Feature type"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:469
-msgid "Height"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:214 src/libslic3r/PrintConfig.cpp:2162
-msgid "Width"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:216
-msgid "Volumetric flow rate"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:315
-#: src/slic3r/GUI/GUI_Preview.cpp:481 src/slic3r/GUI/GUI_Preview.cpp:537
-#: src/slic3r/GUI/GUI_Preview.cpp:713 src/libslic3r/GCode/PreviewData.cpp:404
-msgid "Tool"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:218 src/slic3r/GUI/GUI_Preview.cpp:535
-#: src/libslic3r/GCode/PreviewData.cpp:406
-msgid "Color Print"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:221
-msgid "Show"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/GUI_Preview.cpp:225
-msgid "Feature types"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:227 src/libslic3r/GCode/PreviewData.cpp:163
-msgid "Perimeter"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:228 src/libslic3r/GCode/PreviewData.cpp:164
-msgid "External perimeter"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/GCode/PreviewData.cpp:165
-msgid "Overhang perimeter"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/GCode/PreviewData.cpp:166
-msgid "Internal infill"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/PrintConfig.cpp:1712
-#: src/libslic3r/PrintConfig.cpp:1722 src/libslic3r/GCode/PreviewData.cpp:167
-msgid "Solid infill"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/PrintConfig.cpp:2042
-#: src/libslic3r/PrintConfig.cpp:2053 src/libslic3r/GCode/PreviewData.cpp:168
-msgid "Top solid infill"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:233 src/libslic3r/GCode/PreviewData.cpp:169
-msgid "Bridge infill"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/PrintConfig.cpp:871
-#: src/libslic3r/GCode/PreviewData.cpp:170
-msgid "Gap fill"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:235 src/slic3r/GUI/Tab.cpp:1054
-#: src/libslic3r/GCode/PreviewData.cpp:171
-msgid "Skirt"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/PrintConfig.cpp:1929
-#: src/libslic3r/GCode/PreviewData.cpp:173
-msgid "Support material interface"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/Tab.cpp:1134
-#: src/libslic3r/GCode/PreviewData.cpp:174
-msgid "Wipe tower"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/PrintConfig.cpp:2076
-msgid "Travel"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:244
-msgid "Retractions"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:245
-msgid "Unretractions"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:246
-msgid "Shells"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:13 src/slic3r/GUI/MainFrame.cpp:571
-msgid "Keyboard Shortcuts"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
-msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
-msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
-msgid "Load Config from .ini/amf/3mf/gcode"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:740
-#: src/slic3r/GUI/Plater.cpp:3864 src/libslic3r/PrintConfig.cpp:2990
-msgid "Export G-code"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
-msgid "Save project (3MF)"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
-msgid "Load Config from .ini/amf/3mf/gcode and merge"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
-msgid "(Re)slice"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
-msgid "Select Plater Tab"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
-msgid "Select Print Settings Tab"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
-msgid "Select Filament Settings Tab"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
-msgid "Select Printer Settings Tab"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
-msgid "Switch to 3D"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
-msgid "Switch to Preview"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:121 src/slic3r/GUI/Preferences.cpp:10
-msgid "Preferences"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
-#: src/slic3r/GUI/PrintHostDialogs.cpp:135
-msgid "Print host upload queue"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
-msgid "Camera view"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
-msgid "Add Instance of the selected object"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
-msgid "Remove Instance of the selected object"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
-msgid "Show keyboard shortcuts list"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
-msgid "Press to select multiple object or move multiple object with mouse"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
-msgid "Main Shortcuts"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
-msgid "Select All objects"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
-msgid "Delete selected"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
-msgid "Delete All"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
-msgid "Copy to clipboard"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
-msgid "Paste from clipboard"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
-msgid "Gizmo move"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
-msgid "Gizmo scale"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
-msgid "Gizmo rotate"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
-msgid "Gizmo cut"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
-msgid "Gizmo Place face on bed"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
-msgid "Gizmo SLA support points"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
-#, possible-c-format
-msgid ""
-"Press to snap by 5% in Gizmo scale\n"
-"or by 1mm in Gizmo move"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
-msgid ""
-"Press to scale or rotate selected objects\n"
-"around their own center"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
-msgid "Zoom to Bed"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
-msgid "Zoom to all objects in scene, if none selected"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
-msgid "Zoom to selected object"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
-msgid "Zoom in"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
-msgid "Zoom out"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
-msgid "Unselect gizmo, keep object selection"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
-msgid "Plater Shortcuts"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
-msgid "Arrow Up"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
-msgid "Upper Layer"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
-msgid "Arrow Down"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
-msgid "Lower Layer"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
-msgid "Preview Shortcuts"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
-msgid "Move current slider thumb Up"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
-msgid "Move current slider thumb Down"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
-msgid "Arrow Left"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
-msgid "Set upper thumb to current slider thumb"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
-msgid "Arrow Right"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
-msgid "Set lower thumb to current slider thumb"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
-msgid "Add color change marker for current layer"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
-msgid "Delete color change marker for current layer"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
-msgid "Layers Slider Shortcuts"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:61
-msgid ""
-" - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:163
-msgid "Plater"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:344
-msgid "&Open Project"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:344
-msgid "Open a project file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:346
-msgid "&Save Project"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:346
-msgid "Save current project file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:348
-msgid "Save Project &as"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:348
-msgid "Save current project file as"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:354
-msgid "Import STL/OBJ/AM&F/3MF"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:354
-msgid "Load a model"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:357
-msgid "Import &Config"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:357
-msgid "Load exported configuration file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:359
-msgid "Import Config from &project"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:359
-msgid "Load configuration from project file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:362
-msgid "Import Config &Bundle"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:362
-msgid "Load presets from a bundle"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:364
-msgid "&Import"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:367 src/slic3r/GUI/MainFrame.cpp:607
-msgid "Export &G-code"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:367
-msgid "Export current plate as G-code"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:371
-msgid "Export plate as &STL"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:371
-msgid "Export current plate as STL"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:373
-msgid "Export plate as STL including supports"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:373
-msgid "Export current plate as STL including supports"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:375
-msgid "Export plate as &AMF"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:375
-msgid "Export current plate as AMF"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:378
-msgid "Export &Config"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:378
-msgid "Export current configuration to file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:380
-msgid "Export Config &Bundle"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:380
-msgid "Export all presets to file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:382
-msgid "&Export"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:388
-msgid "Quick Slice"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:388
-msgid "Slice a file into a G-code"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:394
-msgid "Quick Slice and Save As"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:394
-msgid "Slice a file into a G-code, save as"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:400
-msgid "Repeat Last Quick Slice"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:400
-msgid "Repeat last quick slice"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:408
-msgid "(Re)Slice &Now"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:408
-msgid "Start new slicing process"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:411
-msgid "&Repair STL file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:411
-msgid "Automatically repair an STL file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:414
-msgid "&Quit"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:414
-#, possible-c-format
-msgid "Quit %s"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:449
-msgid "&Select all"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:449
-msgid "Selects all objects"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:452
-msgid "&Delete selected"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:452
-msgid "Deletes the current selection"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:454
-msgid "Delete &all"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:454
-msgid "Deletes all objects"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:459
-msgid "&Copy"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:459
-msgid "Copy selection to clipboard"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:461
-msgid "&Paste"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:461
-msgid "Paste clipboard"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:476
-msgid "&Plater Tab"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:476
-msgid "Show the plater"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:483
-msgid "P&rint Settings Tab"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:483
-msgid "Show the print settings"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:485 src/slic3r/GUI/MainFrame.cpp:609
-msgid "&Filament Settings Tab"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:485
-msgid "Show the filament settings"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:488
-msgid "Print&er Settings Tab"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:488
-msgid "Show the printer settings"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:492
-msgid "3&D"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:492
-msgid "Show the 3D editing view"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:494
-msgid "Pre&view"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:494
-msgid "Show the 3D slices preview"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:515
-msgid "Print &Host Upload Queue"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:515
-msgid "Display the Print Host Upload Queue window"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:524
-msgid "Iso"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:524
-msgid "Iso View"
-msgstr ""
-
-#. TRN To be shown in the main menu View->Top
-#: src/slic3r/GUI/MainFrame.cpp:527
-msgid "Top"
-msgstr ""
-
-#. TRN To be shown in Print Settings "Top solid layers"
-#: src/libslic3r/PrintConfig.cpp:2068
-msgctxt "Layers"
-msgid "Top"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:527
-msgid "Top View"
-msgstr ""
-
-#. TRN To be shown in the main menu View->Bottom
-#: src/slic3r/GUI/MainFrame.cpp:529
-msgid "Bottom"
-msgstr ""
-
-#. TRN To be shown in Print Settings "Bottom solid layers"
-#: src/libslic3r/PrintConfig.cpp:150
-msgctxt "Layers"
-msgid "Bottom"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:529
-msgid "Bottom View"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:530
-msgid "Front"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:530
-msgid "Front View"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:531 src/libslic3r/PrintConfig.cpp:1587
-msgid "Rear"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:531
-msgid "Rear View"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:532
-msgid "Left"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:532
-msgid "Left View"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:533
-msgid "Right"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:533
-msgid "Right View"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:547
-msgid "Prusa 3D &Drivers"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:547
-msgid "Open the Prusa3D drivers download page in your browser"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:549
-msgid "Software &Releases"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:549
-msgid "Open the software releases page in your browser"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:555
-#, possible-c-format
-msgid "%s &Website"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:556
-#, possible-c-format
-msgid "Open the %s website in your browser"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:562
-msgid "System &Info"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:562
-msgid "Show system information"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:564
-msgid "Show &Configuration Folder"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:564
-msgid "Show user configuration folder (datadir)"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:566
-msgid "Report an I&ssue"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:566
-#, possible-c-format
-msgid "Report an issue on %s"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:568
-#, possible-c-format
-msgid "&About %s"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:568
-msgid "Show about dialog"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:571
-msgid "Show the list of the keyboard shortcuts"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:579
-msgid "&File"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:580
-msgid "&Edit"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:581
-msgid "&Window"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:582
-msgid "&View"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:585
-msgid "&Help"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:607 src/slic3r/GUI/Plater.cpp:3864
-msgid "Export"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:609
-msgid "Mate&rial Settings Tab"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:630
-msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:644
-msgid "No previously sliced file."
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:645 src/slic3r/GUI/PrintHostDialogs.cpp:230
-msgid "Error"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:650
-msgid "Previously sliced file ("
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:650
-msgid ") not found."
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:651
-msgid "File Not Found"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:686
-#, possible-c-format
-msgid "Save %s file as:"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:686
-msgid "SVG"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:686
-msgid "G-code"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:701
-msgid "Save zip file as:"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:713 src/slic3r/GUI/Plater.cpp:2439
-#: src/slic3r/GUI/Plater.cpp:3658 src/slic3r/GUI/Tab.cpp:1163
-#: src/slic3r/GUI/Tab.cpp:3461
-msgid "Slicing"
-msgstr ""
-
-#. TRN "Processing input_file_basename"
-#: src/slic3r/GUI/MainFrame.cpp:715
-#, possible-c-format
-msgid "Processing %s"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:738
-msgid " was successfully sliced."
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:740
-msgid "Slicing Done!"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:755
-msgid "Select the STL file to repair:"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:768
-msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:783
-msgid "Your file was repaired."
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:783 src/libslic3r/PrintConfig.cpp:3084
-msgid "Repair"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:797
-msgid "Save configuration as:"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:817 src/slic3r/GUI/MainFrame.cpp:881
-msgid "Select configuration to load:"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:854
-msgid "Save presets bundle as:"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:905
-#, possible-c-format
-msgid "%d presets successfully imported."
-msgstr ""
-
-#: src/slic3r/GUI/MsgDialog.cpp:73
-#, possible-c-format
-msgid "%s error"
-msgstr ""
-
-#: src/slic3r/GUI/MsgDialog.cpp:74
-#, possible-c-format
-msgid "%s has encountered an error"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:138
-msgid "Volume"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:139
-msgid "Facets"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:140
-msgid "Materials"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:143
-msgid "Manifold"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:193
-msgid "Sliced Info"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:212 src/slic3r/GUI/Plater.cpp:1048
-msgid "Used Filament (m)"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:213
-msgid "Used Filament (mm³)"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:214
-msgid "Used Filament (g)"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:215
-msgid "Used Material (unit)"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:216 src/slic3r/GUI/Plater.cpp:1063
-#: src/libslic3r/PrintConfig.cpp:718
-msgid "Cost"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:217 src/slic3r/GUI/Plater.cpp:1035
-#: src/slic3r/GUI/Plater.cpp:1077
-msgid "Estimated printing time"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:218
-msgid "Number of tool changes"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:292
-msgid "Click to edit preset"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:432
-msgid "Select what kind of support do you need"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:434 src/libslic3r/PrintConfig.cpp:1840
-#: src/libslic3r/PrintConfig.cpp:2448
-msgid "Support on build plate only"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:435 src/slic3r/GUI/Plater.cpp:528
-msgid "For support enforcers only"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:436
-msgid "Everywhere"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:454 src/slic3r/GUI/Tab.cpp:1060
-msgid "Brim"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:456
-msgid ""
-"This flag enables the brim that will be printed around each object on the "
-"first layer."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:464
-msgid "Purging volumes"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:688
-msgid "Print settings"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:689 src/slic3r/GUI/Tab.cpp:1475
-#: src/slic3r/GUI/Tab.cpp:1476
-msgid "Filament"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:690
-msgid "SLA print settings"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:691 src/slic3r/GUI/Preset.cpp:1277
-msgid "SLA material"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:692
-msgid "Printer"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:738 src/slic3r/GUI/Plater.cpp:3865
-msgid "Send to printer"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:741 src/slic3r/GUI/Plater.cpp:2439
-#: src/slic3r/GUI/Plater.cpp:3661
-msgid "Slice now"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:880
-msgid "Hold Shift to Slice & Export G-code"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:981
-#, possible-c-format
-msgid "%d (%d shells)"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:986
-#, possible-c-format
-msgid "Auto-repaired (%d errors)"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:989
-#, possible-c-format
-msgid ""
-"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
-"facets reversed, %d backwards edges"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:999
-msgid "Yes"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1022
-msgid "Used Material (ml)"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1025
-msgid "object(s)"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1025
-msgid "supports and pad"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1050 src/slic3r/GUI/Plater.cpp:1065
-msgid "objects"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1050 src/slic3r/GUI/Plater.cpp:1065
-msgid "wipe tower"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1080
-msgid "normal mode"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1084
-msgid "stealth mode"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1604
-msgid "Loading"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1614
-#, possible-c-format
-msgid "Processing input file %s\n"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1672
-msgid ""
-"This file contains several objects positioned at multiple heights. Instead "
-"of considering them as multiple objects, should I consider\n"
-"this file as a single object having multiple parts?\n"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1675 src/slic3r/GUI/Plater.cpp:1783
-msgid "Multi-part object detected"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1726
-msgid ""
-"This file cannot be loaded in a simple mode. Do you want to switch to an "
-"advanced mode?\n"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1727
-msgid "Detected advanced data"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1760
-#, possible-c-format
-msgid ""
-"You can't to add the object(s) from %s because of one or some of them "
-"is(are) multi-part"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1780
-msgid ""
-"Multiple objects were loaded for a multi-material printer.\n"
-"Instead of considering them as multiple objects, should I consider\n"
-"these files to represent a single object having multiple parts?\n"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1796
-msgid "Loaded"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1894
-msgid ""
-"Your object appears to be too large, so it was automatically scaled down to "
-"fit your print bed."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1895
-msgid "Object too large?"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1945
-msgid "Export STL file:"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1952
-msgid "Export AMF file:"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1958
-msgid "Save file as:"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2123
-msgid "Arranging canceled"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2126
-msgid "Arranging"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2163
-msgid "Could not arrange model objects! Some geometries may be invalid."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2170
-msgid "Arranging done."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2211
-msgid "Orientation search canceled"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2216
-msgid "Searching for optimal orientation"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2278
-msgid "Orientation found."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2298
-msgid ""
-"The selected object can't be split because it contains more than one volume/"
-"material."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2424
-msgid "Invalid data"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2433
-msgid "Ready to slice"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2471 src/slic3r/GUI/PrintHostDialogs.cpp:231
-msgid "Cancelling"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2488
-msgid "Another export job is currently running."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2749
-msgid "Export failed"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2754 src/slic3r/GUI/PrintHostDialogs.cpp:232
-msgid "Cancelled"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2840 src/slic3r/GUI/Plater.cpp:2852
-#: src/slic3r/GUI/Plater.cpp:2939
-msgid "Increase copies"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2933 src/slic3r/GUI/Plater.cpp:2951
-msgid "Remove the selected object"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2939
-msgid "Place one more copy of the selected object"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2941
-msgid "Decrease copies"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2941
-msgid "Remove one copy of the selected object"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2943
-msgid "Set number of copies"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2943
-msgid "Change the number of copies of the selected object"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2966
-msgid "Reload from Disk"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2966
-msgid "Reload the selected file from Disk"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2969
-msgid "Export the selected object as STL file"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2981
-msgid "Along X axis"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2981
-msgid "Mirror the selected object along the X axis"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2983
-msgid "Along Y axis"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2983
-msgid "Mirror the selected object along the Y axis"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2985
-msgid "Along Z axis"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2985
-msgid "Mirror the selected object along the Z axis"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2988
-msgid "Mirror"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2988
-msgid "Mirror the selected object"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3008
-msgid "To objects"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3008 src/slic3r/GUI/Plater.cpp:3030
-msgid "Split the selected object into individual objects"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3010
-msgid "To parts"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3010 src/slic3r/GUI/Plater.cpp:3050
-msgid "Split the selected object into individual sub-parts"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3013 src/slic3r/GUI/Plater.cpp:3030
-#: src/slic3r/GUI/Plater.cpp:3050 src/libslic3r/PrintConfig.cpp:3108
-msgid "Split"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3013
-msgid "Split the selected object"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3036
-msgid "Optimize orientation"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3036
-msgid "Optimize the rotation of the object for better print results."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3099
-msgid "3D editor view"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3110 src/slic3r/GUI/Tab.cpp:2294
-msgid "Preview"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3341
-msgid "All objects will be removed, continue ?"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3476
-msgid "Save G-code file as:"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3476
-msgid "Save SL1 file as:"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3588
-#, possible-c-format
-msgid "STL file exported to %s"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3604
-#, possible-c-format
-msgid "AMF file exported to %s"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3607
-#, possible-c-format
-msgid "Error exporting AMF file %s"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3633
-#, possible-c-format
-msgid "3MF file exported to %s"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3636
-#, possible-c-format
-msgid "Error exporting 3MF file %s"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:3865
-msgid "Send G-code"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:19 src/slic3r/GUI/Tab.cpp:1818
-#: src/slic3r/GUI/Tab.cpp:2019
-msgid "General"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:36
-msgid "Remember output directory"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:38
-msgid ""
-"If this is enabled, Slic3r will prompt the last output directory instead of "
-"the one containing the input files."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:44
-msgid "Auto-center parts"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:46
-msgid ""
-"If this is enabled, Slic3r will auto-center objects around the print bed "
-"center."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:52
-msgid "Background processing"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:54
-msgid ""
-"If this is enabled, Slic3r will pre-process objects as soon as they're "
-"loaded in order to save time when exporting G-code."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:63
-msgid "If enabled, Slic3r checks for new versions of "
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:71
-msgid ""
-"If enabled, Slic3r downloads updates of built-in system presets in the "
-"background. These updates are downloaded into a separate temporary location. "
-"When a new preset version becomes available it is offered at application "
-"startup."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:76
-msgid "Suppress \" - default - \" presets"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:78
-msgid ""
-"Suppress \" - default - \" presets in the Print / Filament / Printer "
-"selections once there are any other valid presets available."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:84
-msgid "Show incompatible print and filament presets"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:86
-msgid ""
-"When checked, the print and filament presets are shown in the preset editor "
-"even if they are marked as incompatible with the active printer"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:93
-msgid "Use legacy OpenGL 1.1 rendering"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:95
-msgid ""
-"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
-"try to check this checkbox. This will disable the layer height editing and "
-"anti aliasing, so it is likely better to upgrade your graphics driver."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:103
-msgid "Use Retina resolution for the 3D scene"
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:105
-msgid ""
-"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
-"experiencing 3D performance problems, disabling this option may help."
-msgstr ""
-
-#: src/slic3r/GUI/Preferences.cpp:130
-#, possible-c-format
-msgid "You need to restart %s to make the changes effective."
-msgstr ""
-
-#: src/slic3r/GUI/Preset.cpp:207
-msgid "modified"
-msgstr ""
-
-#: src/slic3r/GUI/Preset.cpp:930 src/slic3r/GUI/Preset.cpp:970
-#: src/slic3r/GUI/Preset.cpp:1035 src/slic3r/GUI/Preset.cpp:1067
-#: src/slic3r/GUI/PresetBundle.cpp:1488 src/slic3r/GUI/PresetBundle.cpp:1553
-msgid "System presets"
-msgstr ""
-
-#: src/slic3r/GUI/Preset.cpp:974 src/slic3r/GUI/Preset.cpp:1071
-#: src/slic3r/GUI/PresetBundle.cpp:1558
-msgid "User presets"
-msgstr ""
-
-#: src/slic3r/GUI/Preset.cpp:1003 src/slic3r/GUI/Tab.cpp:240
-msgid "Add a new printer"
-msgstr ""
-
-#: src/slic3r/GUI/Preset.cpp:1275
-msgid "filament"
-msgstr ""
-
-#: src/slic3r/GUI/Preset.cpp:1276
-msgid "SLA print"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:28
-msgid ""
-"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
-"speed will be reduced so that no less than %3%s are spent on that layer "
-"(however, speed will never be reduced below %4%mm/s)."
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:35
-msgid ""
-"\n"
-"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
-"proportionally decreasing speed between %2%%% and %3%%%."
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:39
-msgid ""
-"\n"
-"During the other layers, fan"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:41
-msgid "Fan"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:47
-msgid "will always run at %1%%%"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:50
-msgid "except for the first %1% layers."
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:52
-msgid "except for the first layer."
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:54
-msgid "will be turned off."
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:155
-msgid "external perimeters"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:164
-msgid "perimeters"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:173
-msgid "infill"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:183
-msgid "solid infill"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:191
-msgid "top solid infill"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:202
-msgid "support"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:212
-msgid "support interface"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:218
-msgid "First layer volumetric"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:218
-msgid "Bridging volumetric"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:218
-msgid "Volumetric"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:219
-msgid "flow rate is maximized"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:222
-msgid "by the print profile maximum"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:223
-msgid "when printing"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:224
-msgid "with a volumetric rate"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:228
-#, possible-c-format
-msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:246
-msgid ""
-"Recommended object thin wall thickness: Not available due to invalid layer "
-"height."
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:262
-#, possible-c-format
-msgid "Recommended object thin wall thickness for layer height %.2f and"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:268
-#, possible-c-format
-msgid "%d lines: %.2f mm"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:33
-msgid "Send G-Code to printer host"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:33
-msgid "Upload to Printer Host with the following filename:"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:35
-msgid "Start printing after upload"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:42
-msgid "Use forward slashes ( / ) as a directory separator if needed."
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:148
-msgid "ID"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:149
-msgid "Progress"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:150
-msgid "Status"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:151
-msgid "Host"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:152
-msgid "Filename"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:153
-msgid "Error Message"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:156
-msgid "Cancel selected"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:158
-msgid "Show error message"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:197
-#: src/slic3r/GUI/PrintHostDialogs.cpp:228
-msgid "Enqueued"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:229
-msgid "Uploading"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:233
-msgid "Completed"
-msgstr ""
-
-#: src/slic3r/GUI/PrintHostDialogs.cpp:271
-msgid "Error uploading to print host:"
-msgstr ""
-
-#: src/slic3r/GUI/RammingChart.cpp:23
-msgid "NO RAMMING AT ALL"
-msgstr ""
-
-#: src/slic3r/GUI/RammingChart.cpp:76
-msgid "Time"
-msgstr ""
-
-#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:82
-#: src/libslic3r/PrintConfig.cpp:613 src/libslic3r/PrintConfig.cpp:657
-#: src/libslic3r/PrintConfig.cpp:672 src/libslic3r/PrintConfig.cpp:2268
-#: src/libslic3r/PrintConfig.cpp:2277 src/libslic3r/PrintConfig.cpp:2337
-#: src/libslic3r/PrintConfig.cpp:2344
-msgid "s"
-msgstr ""
-
-#: src/slic3r/GUI/RammingChart.cpp:81
-msgid "Volumetric speed"
-msgstr ""
-
-#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:570
-#: src/libslic3r/PrintConfig.cpp:1210
-msgid "mm³/s"
-msgstr ""
-
-#: src/slic3r/GUI/SysInfoDialog.cpp:44
-msgid "System Information"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:52 src/libslic3r/PrintConfig.cpp:230
-msgid "Compatible printers"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:53
-msgid "Select the printers this profile is compatible with."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:58 src/libslic3r/PrintConfig.cpp:245
-msgid "Compatible print profiles"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:59
-msgid "Select the print profiles this profile is compatible with."
-msgstr ""
-
-#. TRN "Save current Settings"
-#: src/slic3r/GUI/Tab.cpp:133
-#, possible-c-format
-msgid "Save current %s"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:134
-msgid "Delete this preset"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:139
-msgid ""
-"Hover the cursor over buttons to find more information \n"
-"or click this button."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:918
-msgid "It's a default preset."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:919
-msgid "It's a system preset."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:920
-#, possible-c-format
-msgid "Current preset is inherited from %s"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:921
-msgid "default preset"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:925
-msgid "It can't be deleted or modified."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:926
-msgid ""
-"Any modifications should be saved as a new preset inherited from this one."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:927
-msgid "To do that please specify a new name for the preset."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:931
-msgid "Additional information:"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:937
-msgid "printer model"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:945
-msgid "default print profile"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:948
-msgid "default filament profile"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:962
-msgid "default SLA material profile"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:966
-msgid "default SLA print profile"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1001 src/slic3r/GUI/Tab.cpp:3416
-msgid "Layers and perimeters"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1002 src/libslic3r/PrintConfig.cpp:56
-msgid "Layer height"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1006
-msgid "Vertical shells"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1017
-msgid "Horizontal shells"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1018 src/libslic3r/PrintConfig.cpp:1735
-msgid "Solid layers"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1023
-msgid "Quality (slower slicing)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1041
-msgid "Reducing printing time"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1053
-msgid "Skirt and brim"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1070
-msgid "Raft"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1074
-msgid "Options for support material and raft"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1089
-msgid "Speed for print moves"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1101
-msgid "Speed for non-print moves"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1104
-msgid "Modifiers"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1107
-msgid "Acceleration control (advanced)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1114
-msgid "Autospeed (advanced)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1122
-msgid "Multiple Extruders"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1130
-msgid "Ooze prevention"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1147
-msgid "Extrusion width"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1157
-msgid "Overlap"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1160
-msgid "Flow"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1169
-msgid "Other"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1172 src/slic3r/GUI/Tab.cpp:3464
-msgid "Output options"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1173
-msgid "Sequential printing"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1175
-msgid "Extruder clearance (mm)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1184 src/slic3r/GUI/Tab.cpp:3465
-msgid "Output file"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1191 src/libslic3r/PrintConfig.cpp:1408
-msgid "Post-processing scripts"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1197 src/slic3r/GUI/Tab.cpp:1198
-#: src/slic3r/GUI/Tab.cpp:1581 src/slic3r/GUI/Tab.cpp:1582
-#: src/slic3r/GUI/Tab.cpp:1991 src/slic3r/GUI/Tab.cpp:1992
-#: src/slic3r/GUI/Tab.cpp:2085 src/slic3r/GUI/Tab.cpp:2086
-#: src/slic3r/GUI/Tab.cpp:3353 src/slic3r/GUI/Tab.cpp:3354
-msgid "Notes"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1204 src/slic3r/GUI/Tab.cpp:1589
-#: src/slic3r/GUI/Tab.cpp:1998 src/slic3r/GUI/Tab.cpp:2092
-#: src/slic3r/GUI/Tab.cpp:3361 src/slic3r/GUI/Tab.cpp:3470
-msgid "Dependencies"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1205 src/slic3r/GUI/Tab.cpp:1590
-#: src/slic3r/GUI/Tab.cpp:1999 src/slic3r/GUI/Tab.cpp:2093
-#: src/slic3r/GUI/Tab.cpp:3362 src/slic3r/GUI/Tab.cpp:3471
-msgid "Profile dependencies"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1251
-#, possible-c-format
-msgid ""
-"The Spiral Vase mode requires:\n"
-"- one perimeter\n"
-"- no top solid layers\n"
-"- 0% fill density\n"
-"- no support material\n"
-"- no ensure_vertical_shell_thickness\n"
-"\n"
-"Shall I adjust those settings in order to enable Spiral Vase?"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1258
-msgid "Spiral Vase"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1281
-msgid ""
-"The Wipe Tower currently supports the non-soluble supports only\n"
-"if they are printed with the current extruder without triggering a tool "
-"change.\n"
-"(both support_material_extruder and support_material_interface_extruder need "
-"to be set to 0).\n"
-"\n"
-"Shall I adjust those settings in order to enable the Wipe Tower?"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1285 src/slic3r/GUI/Tab.cpp:1302
-msgid "Wipe Tower"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1299
-msgid ""
-"For the Wipe Tower to work with the soluble supports, the support layers\n"
-"need to be synchronized with the object layers.\n"
-"\n"
-"Shall I synchronize support layers in order to enable the Wipe Tower?"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1317
-msgid ""
-"Supports work better, if the following feature is enabled:\n"
-"- Detect bridging perimeters\n"
-"\n"
-"Shall I adjust those settings for supports?"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1320
-msgid "Support Generator"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1362
-msgid ""
-"The %1% infill pattern is not supposed to work at 100%% density.\n"
-"\n"
-"Shall I switch to rectilinear fill pattern?"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1483 src/libslic3r/PrintConfig.cpp:2005
-msgid "Temperature"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1489
-msgid "Bed"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1494
-msgid "Cooling"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1495 src/libslic3r/PrintConfig.cpp:1311
-#: src/libslic3r/PrintConfig.cpp:2124
-msgid "Enable"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1506
-msgid "Fan settings"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1507
-msgid "Fan speed"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1515
-msgid "Cooling thresholds"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1521
-msgid "Filament properties"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1525
-msgid "Print speed override"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1535
-msgid "Toolchange parameters with single extruder MM printers"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1550
-msgid "Ramming settings"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1568 src/slic3r/GUI/Tab.cpp:1954
-msgid "Custom G-code"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1569 src/slic3r/GUI/Tab.cpp:1955
-#: src/libslic3r/PrintConfig.cpp:1761 src/libslic3r/PrintConfig.cpp:1776
-msgid "Start G-code"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1575 src/slic3r/GUI/Tab.cpp:1961
-#: src/libslic3r/PrintConfig.cpp:360 src/libslic3r/PrintConfig.cpp:370
-msgid "End G-code"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1706 src/slic3r/GUI/Tab.cpp:1894
-msgid "Test"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1716
-msgid "Could not get a valid Printer Host reference"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1722 src/slic3r/GUI/Tab.cpp:1907
-msgid "Success!"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1737
-msgid ""
-"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
-"signed certificate."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1750
-msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1751
-msgid "Open CA certificate file"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1779
-#, possible-c-format
-msgid ""
-"HTTPS CA File:\n"
-"    \tOn this system, %s uses HTTPS certificates from the system Certificate "
-"Store or Keychain.\n"
-"    \tTo use a custom CA file, please import your CA file into Certificate "
-"Store / Keychain."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1819 src/slic3r/GUI/Tab.cpp:2020
-msgid "Size and coordinates"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1824 src/slic3r/GUI/Tab.cpp:2025
-#: src/slic3r/GUI/Tab.cpp:3008
-msgid "Set"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1846
-msgid "Capabilities"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1851
-msgid "Number of extruders of the printer."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1879
-msgid "USB/Serial connection"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1880 src/libslic3r/PrintConfig.cpp:1616
-msgid "Serial port"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1885
-msgid "Rescan serial ports"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1907
-msgid "Connection to printer works correctly."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1910
-msgid "Connection failed."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1923 src/slic3r/GUI/Tab.cpp:2080
-msgid "Print Host upload"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1967 src/libslic3r/PrintConfig.cpp:129
-msgid "Before layer change G-code"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1973 src/libslic3r/PrintConfig.cpp:1032
-msgid "After layer change G-code"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1979 src/libslic3r/PrintConfig.cpp:2031
-msgid "Tool change G-code"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1985
-msgid "Between objects G-code (for sequential printing)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2047
-msgid "Display"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2058
-msgid "Tilt"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2059
-msgid "Tilt time"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2065 src/slic3r/GUI/Tab.cpp:3335
-msgid "Corrections"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2142 src/slic3r/GUI/Tab.cpp:2215
-#: src/libslic3r/PrintConfig.cpp:1082 src/libslic3r/PrintConfig.cpp:1100
-#: src/libslic3r/PrintConfig.cpp:1118 src/libslic3r/PrintConfig.cpp:1135
-#: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:1157
-#: src/libslic3r/PrintConfig.cpp:1168
-msgid "Machine limits"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2156
-msgid "Values in this column are for Normal mode"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2157
-msgid "Normal"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2162
-msgid "Values in this column are for Stealth mode"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2163
-msgid "Stealth"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2171
-msgid "Maximum feedrates"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2176
-msgid "Maximum accelerations"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2183
-msgid "Jerk limits"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2188
-msgid "Minimum feedrates"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2237 src/slic3r/GUI/Tab.cpp:2245
-msgid "Single extruder MM setup"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2246
-msgid "Single extruder multimaterial parameters"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2259 src/libslic3r/GCode/PreviewData.cpp:475
-#, possible-c-format
-msgid "Extruder %d"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2266
-msgid "Layer height limits"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2271
-msgid "Position (for multi-extruder printers)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2274
-msgid "Retraction"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2277
-msgid "Only lift Z"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2290
-msgid ""
-"Retraction when tool is disabled (advanced settings for multi-extruder "
-"setups)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2448
-msgid ""
-"The Wipe option is not available when using the Firmware Retraction mode.\n"
-"\n"
-"Shall I disable it in order to enable Firmware Retraction?"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2450
-msgid "Firmware Retraction"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2776
-#, possible-c-format
-msgid "Default preset (%s)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2777
-#, possible-c-format
-msgid "Preset (%s)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2794
-msgid "has the following unsaved changes:"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2797
-msgid "is not compatible with printer"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2798
-msgid "is not compatible with print profile"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2800
-msgid "and it has the following unsaved changes:"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2804
-msgid "Unsaved Changes"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2816
-msgid "Please check your object list before preset changing."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2895
-msgid "%1% - Copy"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2918
-msgid "The supplied name is empty. It can't be saved."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2923
-msgid "Cannot overwrite a system profile."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2927
-msgid "Cannot overwrite an external profile."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2953
-msgid "remove"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2953
-msgid "delete"
-msgstr ""
-
-#. TRN  remove/delete
-#: src/slic3r/GUI/Tab.cpp:2955
-msgid "Are you sure you want to %1% the selected preset?"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2956
-msgid "Remove"
-msgstr ""
-
-#. TRN  Remove/Delete
-#: src/slic3r/GUI/Tab.cpp:2958
-msgid "%1% Preset"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3084
-msgid "LOCKED LOCK"
-msgstr ""
-
-#. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:3086
-msgid ""
-"indicates that the settings are the same as the system values for the "
-"current option group"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3088
-msgid "UNLOCKED LOCK"
-msgstr ""
-
-#. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:3090
-msgid ""
-"indicates that some settings were changed and are not equal to the system "
-"values for the current option group.\n"
-"Click the UNLOCKED LOCK icon to reset all settings for current option group "
-"to the system values."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3095
-msgid "WHITE BULLET"
-msgstr ""
-
-#. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:3097
-msgid ""
-"for the left button: \tindicates a non-system preset,\n"
-"for the right button: \tindicates that the settings hasn't been modified."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3100
-msgid "BACK ARROW"
-msgstr ""
-
-#. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:3102
-msgid ""
-"indicates that the settings were changed and are not equal to the last saved "
-"preset for the current option group.\n"
-"Click the BACK ARROW icon to reset all settings for the current option group "
-"to the last saved preset."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3127
-msgid ""
-"LOCKED LOCK icon indicates that the settings are the same as the system "
-"values for the current option group"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3129
-msgid ""
-"UNLOCKED LOCK icon indicates that some settings were changed and are not "
-"equal to the system values for the current option group.\n"
-"Click to reset all settings for current option group to the system values."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3132
-msgid "WHITE BULLET icon indicates a non system preset."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3135
-msgid ""
-"WHITE BULLET icon indicates that the settings are the same as in the last "
-"saved preset for the current option group."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3137
-msgid ""
-"BACK ARROW icon indicates that the settings were changed and are not equal "
-"to the last saved preset for the current option group.\n"
-"Click to reset all settings for the current option group to the last saved "
-"preset."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3143
-msgid ""
-"LOCKED LOCK icon indicates that the value is the same as the system value."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3144
-msgid ""
-"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
-"the system value.\n"
-"Click to reset current value to the system value."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3150
-msgid ""
-"WHITE BULLET icon indicates that the value is the same as in the last saved "
-"preset."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3151
-msgid ""
-"BACK ARROW icon indicates that the value was changed and is not equal to the "
-"last saved preset.\n"
-"Click to reset current value to the last saved preset."
-msgstr ""
-
-#. TRN Preset
-#: src/slic3r/GUI/Tab.cpp:3264
-#, possible-c-format
-msgid "Save %s as:"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3308
-msgid "the following postfix are not allowed:"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3312
-msgid "The supplied name is not available."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3325
-msgid "Material"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3327 src/slic3r/GUI/Tab.cpp:3418
-msgid "Layers"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3331
-msgid "Exposure"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3426
-msgid "Support head"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3431
-msgid "Support pillar"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3441
-msgid "Connection of the support sticks and junctions"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3446
-msgid "Automatic generation"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3508
-msgid "Head penetration should not be greater than the head width."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3509
-msgid "Invalid Head penetration"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3521
-msgid "Pinhead diameter should be smaller than the pillar diameter."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3522
-msgid "Invalid pinhead diameter"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.hpp:318 src/slic3r/GUI/Tab.hpp:411
-msgid "Print Settings"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.hpp:337
-msgid "Filament Settings"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.hpp:372
-msgid "Printer Settings"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.hpp:396
-msgid "Material Settings"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.hpp:423
-msgid "Save preset"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:30
-msgid "Update available"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:30
-#, possible-c-format
-msgid "New version of %s is available"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:37
-msgid "To download, follow the link below."
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:45
-msgid "Current version:"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:47
-msgid "New version:"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:55
-msgid "Don't notify about new releases any more"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:73 src/slic3r/GUI/UpdateDialogs.cpp:168
-msgid "Configuration update"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:73
-msgid "Configuration update is available"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:76
-msgid ""
-"Would you like to install it?\n"
-"\n"
-"Note that a full configuration snapshot will be created first. It can then "
-"be restored at any time should there be a problem with the new version.\n"
-"\n"
-"Updated configuration bundles:"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:112
-#, possible-c-format
-msgid "%s incompatibility"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:113
-#, possible-c-format
-msgid "%s configuration is incompatible"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:118
-#, possible-c-format
-msgid ""
-"This version of %s is not compatible with currently installed configuration "
-"bundles.\n"
-"This probably happened as a result of running an older %s after using a "
-"newer one.\n"
-"\n"
-"You may either exit %s and try again with a newer version, or you may re-run "
-"the initial configuration. Doing so will create a backup snapshot of the "
-"existing configuration before installing files compatible with this %s.\n"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:127
-#, possible-c-format
-msgid "This %s version: %s"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:132
-msgid "Incompatible bundles:"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:148
-#, possible-c-format
-msgid "Exit %s"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:151
-msgid "Re-configure"
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:172
-#, possible-c-format
-msgid ""
-"%s now uses an updated configuration structure.\n"
-"\n"
-"So called 'System presets' have been introduced, which hold the built-in "
-"default settings for various printers. These System presets cannot be "
-"modified, instead, users now may create their own presets inheriting "
-"settings from one of the System presets.\n"
-"An inheriting preset may either inherit a particular value from its parent "
-"or override it with a customized value.\n"
-"\n"
-"Please proceed with the %s that follows to set up the new presets and to "
-"choose whether to enable automatic preset updates."
-msgstr ""
-
-#: src/slic3r/GUI/UpdateDialogs.cpp:188
-msgid "For more information please visit our wiki page:"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:14
-msgid "Ramming customization"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:40
-msgid ""
-"Ramming denotes the rapid extrusion just before a tool change in a single-"
-"extruder MM printer. Its purpose is to properly shape the end of the "
-"unloaded filament so it does not prevent insertion of the new filament and "
-"can itself be reinserted later. This phase is important and different "
-"materials can require different extrusion speeds to get the good shape. For "
-"this reason, the extrusion rates during ramming are adjustable.\n"
-"\n"
-"This is an expert-level setting, incorrect adjustment will likely lead to "
-"jams, extruder wheel grinding into filament etc."
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:82
-msgid "Total ramming time"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:84
-msgid "Total rammed volume"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:88
-msgid "Ramming line width"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:90
-msgid "Ramming line spacing"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:141
-msgid "Wipe tower - Purging volume adjustment"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:225
-msgid ""
-"Here you can adjust required purging volume (mm³) for any given pair of "
-"tools."
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:226
-msgid "Extruder changed to"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:234
-msgid "unloaded"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:235
-msgid "loaded"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:240
-msgid "Tool #"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:247
-msgid ""
-"Total purging volume is calculated by summing two values below, depending on "
-"which tools are loaded/unloaded."
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:248
-msgid "Volume to purge (mm³) when the filament is being"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:262
-msgid "From"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:327
-msgid ""
-"Switching to simple settings will discard changes done in the advanced "
-"mode!\n"
-"\n"
-"Do you want to proceed?"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:339
-msgid "Show simplified settings"
-msgstr ""
-
-#: src/slic3r/GUI/WipeTowerDialog.cpp:339
-msgid "Show advanced settings"
-msgstr ""
-
-#: src/slic3r/GUI/wxExtensions.cpp:400
-msgid "Instances"
-msgstr ""
-
-#: src/slic3r/GUI/wxExtensions.cpp:407 src/slic3r/GUI/wxExtensions.cpp:474
-#, possible-c-format
-msgid "Instance %d"
-msgstr ""
-
-#: src/slic3r/GUI/wxExtensions.cpp:2462
-#, possible-c-format
-msgid "Switch to the %s mode"
-msgstr ""
-
-#: src/slic3r/GUI/wxExtensions.cpp:2463
-#, possible-c-format
-msgid "Current mode is %s"
-msgstr ""
-
-#: src/slic3r/Utils/Duet.cpp:51
-msgid "Connection to Duet works correctly."
-msgstr ""
-
-#: src/slic3r/Utils/Duet.cpp:56
-msgid "Could not connect to Duet"
-msgstr ""
-
-#: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:154
-msgid "Unknown error occured"
-msgstr ""
-
-#: src/slic3r/Utils/Duet.cpp:148
-msgid "Wrong password"
-msgstr ""
-
-#: src/slic3r/Utils/Duet.cpp:151
-msgid "Could not get resources to create a new connection"
-msgstr ""
-
-#: src/slic3r/Utils/OctoPrint.cpp:69
-#, possible-c-format
-msgid "Mismatched type of print host: %s"
-msgstr ""
-
-#: src/slic3r/Utils/OctoPrint.cpp:84
-msgid "Connection to OctoPrint works correctly."
-msgstr ""
-
-#: src/slic3r/Utils/OctoPrint.cpp:90
-msgid "Could not connect to OctoPrint"
-msgstr ""
-
-#: src/slic3r/Utils/OctoPrint.cpp:90
-msgid "Note: OctoPrint version at least 1.1.0 is required."
-msgstr ""
-
-#: src/slic3r/Utils/OctoPrint.cpp:195
-msgid "Connection to Prusa SL1 works correctly."
-msgstr ""
-
-#: src/slic3r/Utils/OctoPrint.cpp:200
-msgid "Could not connect to Prusa SLA"
-msgstr ""
-
-#: src/slic3r/Utils/PresetUpdater.cpp:583
-#, possible-c-format
-msgid "requires min. %s and max. %s"
-msgstr ""
-
-#: src/slic3r/Utils/PresetUpdater.cpp:588
-#, possible-c-format
-msgid "requires min. %s"
-msgstr ""
-
-#: src/slic3r/Utils/PresetUpdater.cpp:590
-#, possible-c-format
-msgid "requires max. %s"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:219
-#: src/slic3r/Utils/FixModelByWin10.cpp:359
-msgid "Exporting source model"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:235
-msgid "Failed loading the input model."
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:242
-msgid "Repairing model by the Netfabb service"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:248
-msgid "Mesh repair failed."
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:251
-#: src/slic3r/Utils/FixModelByWin10.cpp:378
-msgid "Loading repaired model"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:263
-#: src/slic3r/Utils/FixModelByWin10.cpp:270
-#: src/slic3r/Utils/FixModelByWin10.cpp:302
-msgid "Saving mesh into the 3MF container failed."
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:340
-msgid "Model fixing"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:341
-msgid "Exporting model..."
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:368
-msgid "Export of a temporary 3mf file failed"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:383
-msgid "Import of the repaired 3mf file failed"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:385
-msgid "Repaired 3MF file does not contain any object"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:387
-msgid "Repaired 3MF file contains more than one object"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:389
-msgid "Repaired 3MF file does not contain any volume"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:391
-msgid "Repaired 3MF file contains more than one volume"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:400
-msgid "Model repair finished"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:406
-msgid "Model repair canceled"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:423
-msgid "Model repaired successfully"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:423
-#: src/slic3r/Utils/FixModelByWin10.cpp:426
-msgid "Model Repair by the Netfabb service"
-msgstr ""
-
-#: src/slic3r/Utils/FixModelByWin10.cpp:426
-msgid "Model repair failed: \n"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:35
-msgid "undefined error"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:37
-msgid "too many files"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:39
-msgid "file too large"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:41
-msgid "unsupported method"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:43
-msgid "unsupported encryption"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:45
-msgid "unsupported feature"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:47
-msgid "failed finding central directory"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:49
-msgid "not a ZIP archive"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:51
-msgid "invalid header or archive is corrupted"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:53
-msgid "unsupported multidisk archive"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:55
-msgid "decompression failed or archive is corrupted"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:57
-msgid "compression failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:59
-msgid "unexpected decompressed size"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:61
-msgid "CRC-32 check failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:63
-msgid "unsupported central directory size"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:65
-msgid "allocation failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:67
-msgid "file open failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:69
-msgid "file create failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:71
-msgid "file write failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:73
-msgid "file read failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:75
-msgid "file close failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:77
-msgid "file seek failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:79
-msgid "file stat failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:81
-msgid "invalid parameter"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:83
-msgid "invalid filename"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:85
-msgid "buffer too small"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:87
-msgid "internal error"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:89
-msgid "file not found"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:91
-msgid "archive is too large"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:93
-msgid "validation failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:95
-msgid "write calledback failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:105
-msgid "Error with zip archive"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1135
-msgid "All objects are outside of the print volume."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1162
-msgid "Some objects are too close; your extruder will collide with them."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1177
-msgid ""
-"Some objects are too tall and cannot be printed without extruder collisions."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1187
-msgid "The Spiral Vase option can only be used when printing a single object."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1189
-msgid ""
-"The Spiral Vase option can only be used when printing single material "
-"objects."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1195
-msgid ""
-"All extruders must have the same diameter for single extruder multimaterial "
-"printer."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1200
-msgid ""
-"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
-"and Repetier G-code flavors."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1202
-msgid ""
-"The Wipe Tower is currently only supported with the relative extruder "
-"addressing (use_relative_e_distances=1)."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1223
-msgid ""
-"The Wipe Tower is only supported for multiple objects if they have equal "
-"layer heights"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1225
-msgid ""
-"The Wipe Tower is only supported for multiple objects if they are printed "
-"over an equal number of raft layers"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1227
-msgid ""
-"The Wipe Tower is only supported for multiple objects if they are printed "
-"with the same support_material_contact_distance"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1229
-msgid ""
-"The Wipe Tower is only supported for multiple objects if they are sliced "
-"equally."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1258
-msgid ""
-"The Wipe tower is only supported if all objects have the same layer height "
-"profile"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1268
-msgid "The supplied settings will cause an empty print."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1285
-msgid ""
-"One or more object were assigned an extruder that the printer does not have."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1294
-msgid ""
-"Printing with multiple extruders of differing nozzle diameters. If support "
-"is to be printed with the current extruder (support_material_extruder == 0 "
-"or support_material_interface_extruder == 0), all nozzles have to be of the "
-"same diameter."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1302
-msgid ""
-"For the Wipe Tower to work with the soluble supports, the support layers "
-"need to be synchronized with the object layers."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1306
-msgid ""
-"The Wipe Tower currently supports the non-soluble supports only if they are "
-"printed with the current extruder without triggering a tool change. (both "
-"support_material_extruder and support_material_interface_extruder need to be "
-"set to 0)."
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1313
-msgid "first_layer_height"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1328
-msgid "First layer height can't be greater than nozzle diameter"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1332
-msgid "Layer height can't be greater than nozzle diameter"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1476
-msgid "Infilling layers"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1484
-msgid "Generating skirt"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1492
-msgid "Generating brim"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1520
-msgid "Exporting G-code"
-msgstr ""
-
-#: src/libslic3r/Print.cpp:1524
-msgid "Generating G-code"
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:57
-msgid "Slicing model"
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:58 src/libslic3r/SLAPrint.cpp:819
-msgid "Generating support points"
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:59
-msgid "Generating support tree"
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:60
-msgid "Generating pad"
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:61
-msgid "Slicing supports"
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:78
-msgid "Merging slices and calculating statistics"
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:79
-msgid "Rasterizing layers"
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:622
-msgid ""
-"Cannot proceed without support points! Add support points or disable support "
-"generation."
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:634
-msgid "Elevation is too low for object."
-msgstr ""
-
-#. TRN To be shown at the status bar on SLA slicing error.
-#: src/libslic3r/SLAPrint.cpp:719
-msgid "Slicing had to be stopped due to an internal error."
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:867 src/libslic3r/SLAPrint.cpp:877
-#: src/libslic3r/SLAPrint.cpp:925
-msgid "Visualizing supports"
-msgstr ""
-
-#: src/libslic3r/SLAPrint.cpp:1463
-msgid "Slicing done"
-msgstr ""
-
-#: src/libslic3r/PrintBase.cpp:65
-msgid "Failed processing of the output_filename_format template."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
-msgid "Printer technology"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:51
-msgid "Bed shape"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:58
-msgid ""
-"This setting controls the height (and thus the total number) of the slices/"
-"layers. Thinner layers give better accuracy but take more time to print."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:65
-msgid "Max print height"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:66
-msgid ""
-"Set this to the maximum height that can be reached by your extruder while "
-"printing."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:72
-msgid "Slice gap closing radius"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:74
-msgid ""
-"Cracks smaller than 2x gap closing radius are being filled during the "
-"triangle mesh slicing. The gap closing operation may reduce the final print "
-"resolution, therefore it is advisable to keep the value reasonably low."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:82
-msgid "Hostname, IP or URL"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:83
-msgid ""
-"Slic3r can upload G-code files to a printer host. This field should contain "
-"the hostname, IP address or URL of the printer host instance."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:89
-msgid "API Key / Password"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:90
-msgid ""
-"Slic3r can upload G-code files to a printer host. This field should contain "
-"the API Key or the password required for authentication."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:96
-msgid "HTTPS CA File"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:97
-msgid ""
-"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
-"in crt/pem format. If left blank, the default OS CA certificate repository "
-"is used."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:112
-msgid "Avoid crossing perimeters"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:113
-msgid ""
-"Optimize travel moves in order to minimize the crossing of perimeters. This "
-"is mostly useful with Bowden extruders which suffer from oozing. This "
-"feature slows down both the print and the G-code generation."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:120 src/libslic3r/PrintConfig.cpp:2002
-msgid "Other layers"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:121
-msgid ""
-"Bed temperature for layers after the first one. Set this to zero to disable "
-"bed temperature control commands in the output."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:123
-msgid "Bed temperature"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:130
-msgid ""
-"This custom code is inserted at every layer change, right before the Z move. "
-"Note that you can use placeholder variables for all Slic3r settings as well "
-"as [layer_num] and [layer_z]."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:140
-msgid "Between objects G-code"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:141
-msgid ""
-"This code is inserted between objects when using sequential printing. By "
-"default extruder and bed temperature are reset using non-wait command; "
-"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
-"will not add temperature commands. Note that you can use placeholder "
-"variables for all Slic3r settings, so you can put a \"M109 "
-"S[first_layer_temperature]\" command wherever you want."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:152
-msgid "Number of solid layers to generate on bottom surfaces."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:153
-msgid "Bottom solid layers"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:158
-msgid "Bridge"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:159
-msgid ""
-"This is the acceleration your printer will use for bridges. Set zero to "
-"disable acceleration control for bridges."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:161 src/libslic3r/PrintConfig.cpp:304
-#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:937
-#: src/libslic3r/PrintConfig.cpp:1106 src/libslic3r/PrintConfig.cpp:1159
-#: src/libslic3r/PrintConfig.cpp:1170 src/libslic3r/PrintConfig.cpp:1359
-msgid "mm/s²"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:167
-msgid "Bridging angle"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:169
-msgid ""
-"Bridging angle override. If left to zero, the bridging angle will be "
-"calculated automatically. Otherwise the provided angle will be used for all "
-"bridges. Use 180° for zero angle."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:172 src/libslic3r/PrintConfig.cpp:734
-#: src/libslic3r/PrintConfig.cpp:1595 src/libslic3r/PrintConfig.cpp:1605
-#: src/libslic3r/PrintConfig.cpp:1833 src/libslic3r/PrintConfig.cpp:1987
-#: src/libslic3r/PrintConfig.cpp:2171 src/libslic3r/PrintConfig.cpp:2488
-#: src/libslic3r/PrintConfig.cpp:2597
-msgid "°"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:178
-msgid "Bridges fan speed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:179
-msgid "This fan speed is enforced during all bridges and overhangs."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:180 src/libslic3r/PrintConfig.cpp:746
-#: src/libslic3r/PrintConfig.cpp:1179 src/libslic3r/PrintConfig.cpp:1242
-#: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:2285
-#: src/libslic3r/PrintConfig.cpp:2527
-msgid "%"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:187
-msgid "Bridge flow ratio"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:189
-msgid ""
-"This factor affects the amount of plastic for bridging. You can decrease it "
-"slightly to pull the extrudates and prevent sagging, although default "
-"settings are usually good and you should experiment with cooling (use a fan) "
-"before tweaking this."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:199
-msgid "Bridges"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:201
-msgid "Speed for printing bridges."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:202 src/libslic3r/PrintConfig.cpp:578
-#: src/libslic3r/PrintConfig.cpp:586 src/libslic3r/PrintConfig.cpp:595
-#: src/libslic3r/PrintConfig.cpp:603 src/libslic3r/PrintConfig.cpp:630
-#: src/libslic3r/PrintConfig.cpp:649 src/libslic3r/PrintConfig.cpp:875
-#: src/libslic3r/PrintConfig.cpp:1002 src/libslic3r/PrintConfig.cpp:1088
-#: src/libslic3r/PrintConfig.cpp:1124 src/libslic3r/PrintConfig.cpp:1137
-#: src/libslic3r/PrintConfig.cpp:1148 src/libslic3r/PrintConfig.cpp:1201
-#: src/libslic3r/PrintConfig.cpp:1260 src/libslic3r/PrintConfig.cpp:1388
-#: src/libslic3r/PrintConfig.cpp:1562 src/libslic3r/PrintConfig.cpp:1571
-#: src/libslic3r/PrintConfig.cpp:1966 src/libslic3r/PrintConfig.cpp:2078
-msgid "mm/s"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:209
-msgid "Brim width"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:210
-msgid ""
-"Horizontal width of the brim that will be printed around each object on the "
-"first layer."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:217
-msgid "Clip multi-part objects"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:218
-msgid ""
-"When printing multi-material objects, this settings will make Slic3r to clip "
-"the overlapping object parts one by the other (2nd part will be clipped by "
-"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:225
-msgid "Colorprint height"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:226
-msgid "Heights at which a filament change is to occur."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:236
-msgid "Compatible printers condition"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:237
-msgid ""
-"A boolean expression using the configuration values of an active printer "
-"profile. If this expression evaluates to true, this profile is considered "
-"compatible with the active printer profile."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:251
-msgid "Compatible print profiles condition"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:252
-msgid ""
-"A boolean expression using the configuration values of an active print "
-"profile. If this expression evaluates to true, this profile is considered "
-"compatible with the active print profile."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:269
-msgid "Complete individual objects"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:270
-msgid ""
-"When printing multiple objects or copies, this feature will complete each "
-"object before moving onto next one (and starting it from its bottom layer). "
-"This feature is useful to avoid the risk of ruined prints. Slic3r should "
-"warn and prevent you from extruder collisions, but beware."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:278
-msgid "Enable auto cooling"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:279
-msgid ""
-"This flag enables the automatic cooling logic that adjusts print speed and "
-"fan speed according to layer printing time."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:284
-msgid "Cooling tube position"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:285
-msgid "Distance of the center-point of the cooling tube from the extruder tip."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:292
-msgid "Cooling tube length"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:293
-msgid "Length of the cooling tube to limit space for cooling moves inside it."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:301
-msgid ""
-"This is the acceleration your printer will be reset to after the role-"
-"specific acceleration values are used (perimeter/infill). Set zero to "
-"prevent resetting acceleration at all."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:310
-msgid "Default filament profile"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:311
-msgid ""
-"Default filament profile associated with the current printer profile. On "
-"selection of the current printer profile, this filament profile will be "
-"activated."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:317
-msgid "Default print profile"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:318 src/libslic3r/PrintConfig.cpp:2366
-#: src/libslic3r/PrintConfig.cpp:2377
-msgid ""
-"Default print profile associated with the current printer profile. On "
-"selection of the current printer profile, this print profile will be "
-"activated."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:324
-msgid "Disable fan for the first"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:325
-msgid ""
-"You can set this to a positive value to disable fan at all during the first "
-"layers, so that it does not make adhesion worse."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:327 src/libslic3r/PrintConfig.cpp:947
-#: src/libslic3r/PrintConfig.cpp:1460 src/libslic3r/PrintConfig.cpp:1645
-#: src/libslic3r/PrintConfig.cpp:1706 src/libslic3r/PrintConfig.cpp:1869
-#: src/libslic3r/PrintConfig.cpp:1914
-msgid "layers"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:334
-msgid "Don't support bridges"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:336
-msgid ""
-"Experimental option for preventing support material from being generated "
-"under bridged areas."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:342
-msgid "Distance between copies"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:343
-msgid "Distance used for the auto-arrange feature of the plater."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:350
-msgid "Elephant foot compensation"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:352
-msgid ""
-"The first layer will be shrunk in the XY plane by the configured value to "
-"compensate for the 1st layer squish aka an Elephant Foot effect."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:361
-msgid ""
-"This end procedure is inserted at the end of the output file. Note that you "
-"can use placeholder variables for all Slic3r settings."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:371
-msgid ""
-"This end procedure is inserted at the end of the output file, before the "
-"printer end gcode. Note that you can use placeholder variables for all "
-"Slic3r settings. If you have multiple extruders, the gcode is processed in "
-"extruder order."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:381
-msgid "Ensure vertical shell thickness"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:383
-msgid ""
-"Add solid infill near sloping surfaces to guarantee the vertical shell "
-"thickness (top+bottom solid layers)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:389
-msgid "Top fill pattern"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:391
-msgid ""
-"Fill pattern for top infill. This only affects the top visible layer, and "
-"not its adjacent solid shells."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:797
-#: src/libslic3r/PrintConfig.cpp:1947
-msgid "Rectilinear"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:400 src/libslic3r/PrintConfig.cpp:803
-msgid "Concentric"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:807
-msgid "Hilbert Curve"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:402 src/libslic3r/PrintConfig.cpp:808
-msgid "Archimedean Chords"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:403 src/libslic3r/PrintConfig.cpp:809
-msgid "Octagram Spiral"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:410
-msgid "Bottom fill pattern"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:411
-msgid ""
-"Fill pattern for bottom infill. This only affects the bottom external "
-"visible layer, and not its adjacent solid shells."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:416 src/libslic3r/PrintConfig.cpp:426
-msgid "External perimeters"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:418
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for external "
-"perimeters. If left zero, default extrusion width will be used if set, "
-"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
-"(for example 200%), it will be computed over layer height."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:421 src/libslic3r/PrintConfig.cpp:836
-#: src/libslic3r/PrintConfig.cpp:968 src/libslic3r/PrintConfig.cpp:1379
-#: src/libslic3r/PrintConfig.cpp:1717 src/libslic3r/PrintConfig.cpp:1890
-#: src/libslic3r/PrintConfig.cpp:2048
-msgid "mm or % (leave 0 for default)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:428
-msgid ""
-"This separate setting will affect the speed of external perimeters (the "
-"visible ones). If expressed as percentage (for example: 80%) it will be "
-"calculated on the perimeters speed setting above. Set to zero for auto."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:431 src/libslic3r/PrintConfig.cpp:857
-#: src/libslic3r/PrintConfig.cpp:1676 src/libslic3r/PrintConfig.cpp:1727
-#: src/libslic3r/PrintConfig.cpp:1933 src/libslic3r/PrintConfig.cpp:2060
-msgid "mm/s or %"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:438
-msgid "External perimeters first"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:440
-msgid ""
-"Print contour perimeters from the outermost one to the innermost one instead "
-"of the default inverse order."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:446
-msgid "Extra perimeters if needed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:448
-#, possible-c-format
-msgid ""
-"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
-"keeps adding perimeters, until more than 70% of the loop immediately above "
-"is supported."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:458
-msgid ""
-"The extruder to use (unless more specific extruder settings are specified). "
-"This value overrides perimeter and infill extruders, but not the support "
-"extruders."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:470
-msgid ""
-"Set this to the vertical distance between your nozzle tip and (usually) the "
-"X carriage rods. In other words, this is the height of the clearance "
-"cylinder around your extruder, and it represents the maximum depth the "
-"extruder can peek before colliding with other printed objects."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:480
-msgid "Radius"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:481
-msgid ""
-"Set this to the clearance radius around your extruder. If the extruder is "
-"not centered, choose the largest value for safety. This setting is used to "
-"check for collisions and to display the graphical preview in the plater."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:491
-msgid "Extruder Color"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:492 src/libslic3r/PrintConfig.cpp:552
-msgid "This is only used in the Slic3r interface as a visual help."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:498
-msgid "Extruder offset"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:499
-msgid ""
-"If your firmware doesn't handle the extruder displacement you need the G-"
-"code to take it into account. This option lets you specify the displacement "
-"of each extruder with respect to the first one. It expects positive "
-"coordinates (they will be subtracted from the XY coordinate)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:508
-msgid "Extrusion axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:509
-msgid ""
-"Use this option to set the axis letter associated to your printer's extruder "
-"(usually E but some printers use A)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:514
-msgid "Extrusion multiplier"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:515
-msgid ""
-"This factor changes the amount of flow proportionally. You may need to tweak "
-"this setting to get nice surface finish and correct single wall widths. "
-"Usual values are between 0.9 and 1.1. If you think you need to change this "
-"more, check filament diameter and your firmware E steps."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:523
-msgid "Default extrusion width"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:525
-msgid ""
-"Set this to a non-zero value to allow a manual extrusion width. If left to "
-"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
-"tooltips for perimeter extrusion width, infill extrusion width etc). If "
-"expressed as percentage (for example: 230%), it will be computed over layer "
-"height."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:529
-msgid "mm or % (leave 0 for auto)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:534
-msgid "Keep fan always on"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:535
-msgid ""
-"If this is enabled, fan will never be disabled and will be kept running at "
-"least at its minimum speed. Useful for PLA, harmful for ABS."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:540
-msgid "Enable fan if layer print time is below"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:541
-msgid ""
-"If layer print time is estimated below this number of seconds, fan will be "
-"enabled and its speed will be calculated by interpolating the minimum and "
-"maximum speeds."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:543 src/libslic3r/PrintConfig.cpp:1663
-msgid "approximate seconds"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:551
-msgid "Color"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:557
-msgid "Filament notes"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:558
-msgid "You can put your notes regarding the filament here."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:1207
-msgid "Max volumetric speed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:567
-msgid ""
-"Maximum volumetric speed allowed for this filament. Limits the maximum "
-"volumetric speed of a print to the minimum of print and filament volumetric "
-"speed. Set to zero for no limit."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:576
-msgid "Loading speed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:577
-msgid "Speed used for loading the filament on the wipe tower."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:584
-msgid "Loading speed at the start"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:585
-msgid "Speed used at the very beginning of loading phase."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:592
-msgid "Unloading speed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:593
-msgid ""
-"Speed used for unloading the filament on the wipe tower (does not affect  "
-"initial part of unloading just after ramming)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:601
-msgid "Unloading speed at the start"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:602
-msgid ""
-"Speed used for unloading the tip of the filament immediately after ramming."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:609
-msgid "Delay after unloading"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:610
-msgid ""
-"Time to wait after the filament is unloaded. May help to get reliable "
-"toolchanges with flexible materials that may need more time to shrink to "
-"original dimensions."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:619
-msgid "Number of cooling moves"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:620
-msgid ""
-"Filament is cooled by being moved back and forth in the cooling tubes. "
-"Specify desired number of these moves."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:628
-msgid "Speed of the first cooling move"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:629
-msgid "Cooling moves are gradually accelerating beginning at this speed."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:636
-msgid "Minimal purge on wipe tower"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:637
-msgid ""
-"After a tool change, the exact position of the newly loaded filament inside "
-"the nozzle may not be known, and the filament pressure is likely not yet "
-"stable. Before purging the print head into an infill or a sacrificial "
-"object, Slic3r will always prime this amount of material into the wipe tower "
-"to produce successive infill or sacrificial object extrusions reliably."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:641
-msgid "mm³"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:647
-msgid "Speed of the last cooling move"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:648
-msgid "Cooling moves are gradually accelerating towards this speed."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:655
-msgid "Filament load time"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:656
-msgid ""
-"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
-"filament during a tool change (when executing the T code). This time is "
-"added to the total print time by the G-code time estimator."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:663
-msgid "Ramming parameters"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:664
-msgid ""
-"This string is edited by RammingDialog and contains ramming specific "
-"parameters."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:670
-msgid "Filament unload time"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:671
-msgid ""
-"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
-"filament during a tool change (when executing the T code). This time is "
-"added to the total print time by the G-code time estimator."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:679
-msgid ""
-"Enter your filament diameter here. Good precision is required, so use a "
-"caliper and do multiple measurements along the filament, then compute the "
-"average."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:686
-msgid "Density"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:687
-msgid ""
-"Enter your filament density here. This is only for statistical information. "
-"A decent way is to weigh a known length of filament and compute the ratio of "
-"the length to volume. Better is to calculate the volume directly through "
-"displacement."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:690
-msgid "g/cm³"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:695
-msgid "Filament type"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:696
-msgid "The filament material type for use in custom G-codes."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:712
-msgid "Soluble material"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:713
-msgid "Soluble material is most likely used for a soluble support."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:719
-msgid ""
-"Enter your filament cost per kg here. This is only for statistical "
-"information."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:720
-msgid "money/kg"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:729
-msgid "Fill angle"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:731
-msgid ""
-"Default base angle for infill orientation. Cross-hatching will be applied to "
-"this. Bridges will be infilled using the best direction Slic3r can detect, "
-"so this setting does not affect them."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:743
-msgid "Fill density"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:745
-msgid "Density of internal infill, expressed in the range 0% - 100%."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:780
-msgid "Fill pattern"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:782
-msgid "Fill pattern for general low-density infill."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:798
-msgid "Grid"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:799
-msgid "Triangles"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:800
-msgid "Stars"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:801
-msgid "Cubic"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:802
-msgid "Line"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:804 src/libslic3r/PrintConfig.cpp:1949
-msgid "Honeycomb"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:805
-msgid "3D Honeycomb"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:806
-msgid "Gyroid"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:813 src/libslic3r/PrintConfig.cpp:822
-#: src/libslic3r/PrintConfig.cpp:830 src/libslic3r/PrintConfig.cpp:863
-msgid "First layer"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:814
-msgid ""
-"This is the acceleration your printer will use for first layer. Set zero to "
-"disable acceleration control for first layer."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:823
-msgid ""
-"Heated build plate temperature for the first layer. Set this to zero to "
-"disable bed temperature control commands in the output."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:832
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for first "
-"layer. You can use this to force fatter extrudates for better adhesion. If "
-"expressed as percentage (for example 120%) it will be computed over first "
-"layer height. If set to zero, it will use the default extrusion width."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:842
-msgid "First layer height"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:844
-msgid ""
-"When printing with very low layer heights, you might still want to print a "
-"thicker bottom layer to improve adhesion and tolerance for non perfect build "
-"plates. This can be expressed as an absolute value or as a percentage (for "
-"example: 150%) over the default layer height."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:848 src/libslic3r/PrintConfig.cpp:993
-#: src/libslic3r/PrintConfig.cpp:1822
-msgid "mm or %"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:853
-msgid "First layer speed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:854
-msgid ""
-"If expressed as absolute value in mm/s, this speed will be applied to all "
-"the print moves of the first layer, regardless of their type. If expressed "
-"as a percentage (for example: 40%) it will scale the default speeds."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:864
-msgid ""
-"Extruder temperature for first layer. If you want to control temperature "
-"manually during print, set this to zero to disable temperature control "
-"commands in the output file."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:873
-msgid ""
-"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
-"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
-"filling."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:881
-msgid "Verbose G-code"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:882
-msgid ""
-"Enable this to get a commented G-code file, with each line explained by a "
-"descriptive text. If you print from SD card, the additional weight of the "
-"file could make your firmware slow down."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:889
-msgid "G-code flavor"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:890
-msgid ""
-"Some G/M-code commands, including temperature control and others, are not "
-"universal. Set this option to your printer's firmware to get a compatible "
-"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
-"extrusion value at all."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:913
-msgid "No extrusion"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:918
-msgid "Label objects"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:919
-msgid ""
-"Enable this to add comments into the G-Code labeling print moves with what "
-"object they belong to, which is useful for the Octoprint CancelObject "
-"plugin. This settings is NOT compatible with Single Extruder Multi Material "
-"setup and Wipe into Object / Wipe into Infill."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:926
-msgid "High extruder current on filament swap"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:927
-msgid ""
-"It may be beneficial to increase the extruder motor current during the "
-"filament exchange sequence to allow for rapid ramming feed rates and to "
-"overcome resistance when loading a filament with an ugly shaped tip."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:935
-msgid ""
-"This is the acceleration your printer will use for infill. Set zero to "
-"disable acceleration control for infill."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:943
-msgid "Combine infill every"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:945
-msgid ""
-"This feature allows to combine infill and speed up your print by extruding "
-"thicker infill layers while preserving thin perimeters, thus accuracy."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:948
-msgid "Combine infill every n layers"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:954
-msgid "Infill extruder"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:956
-msgid "The extruder to use when printing infill."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:964
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for infill. If "
-"left zero, default extrusion width will be used if set, otherwise 1.125 x "
-"nozzle diameter will be used. You may want to use fatter extrudates to speed "
-"up the infill and make your parts stronger. If expressed as percentage (for "
-"example 90%) it will be computed over layer height."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:973
-msgid "Infill before perimeters"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:974
-msgid ""
-"This option will switch the print order of perimeters and infill, making the "
-"latter first."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:979
-msgid "Only infill where needed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:981
-msgid ""
-"This option will limit infill to the areas actually needed for supporting "
-"ceilings (it will act as internal support material). If enabled, slows down "
-"the G-code generation due to the multiple checks involved."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:988
-msgid "Infill/perimeters overlap"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:990
-msgid ""
-"This setting applies an additional overlap between infill and perimeters for "
-"better bonding. Theoretically this shouldn't be needed, but backlash might "
-"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
-"perimeter extrusion width."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1001
-msgid "Speed for printing the internal fill. Set to zero for auto."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1009
-msgid "Inherits profile"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1010
-msgid "Name of the profile, from which this profile inherits."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1023
-msgid "Interface shells"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1024
-msgid ""
-"Force the generation of solid shells between adjacent materials/volumes. "
-"Useful for multi-extruder prints with translucent materials or manual "
-"soluble support material."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1033
-msgid ""
-"This custom code is inserted at every layer change, right after the Z move "
-"and before the extruder moves to the first layer point. Note that you can "
-"use placeholder variables for all Slic3r settings as well as [layer_num] and "
-"[layer_z]."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1044
-msgid "Supports remaining times"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1045
-msgid ""
-"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
-"intervals into the G-code to let the firmware show accurate remaining time. "
-"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
-"firmware supports M73 Qxx Sxx for the silent mode."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1053
-msgid "Supports stealth mode"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1054
-msgid "The firmware supports stealth mode"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1078
-msgid "Maximum feedrate X"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1079
-msgid "Maximum feedrate Y"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1080
-msgid "Maximum feedrate Z"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1081
-msgid "Maximum feedrate E"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1084
-msgid "Maximum feedrate of the X axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1085
-msgid "Maximum feedrate of the Y axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1086
-msgid "Maximum feedrate of the Z axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1087
-msgid "Maximum feedrate of the E axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1096
-msgid "Maximum acceleration X"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1097
-msgid "Maximum acceleration Y"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1098
-msgid "Maximum acceleration Z"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1099
-msgid "Maximum acceleration E"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1102
-msgid "Maximum acceleration of the X axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1103
-msgid "Maximum acceleration of the Y axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1104
-msgid "Maximum acceleration of the Z axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1105
-msgid "Maximum acceleration of the E axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1114
-msgid "Maximum jerk X"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1115
-msgid "Maximum jerk Y"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1116
-msgid "Maximum jerk Z"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1117
-msgid "Maximum jerk E"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1120
-msgid "Maximum jerk of the X axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1121
-msgid "Maximum jerk of the Y axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1122
-msgid "Maximum jerk of the Z axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1123
-msgid "Maximum jerk of the E axis"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1134
-msgid "Minimum feedrate when extruding"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1136
-msgid "Minimum feedrate when extruding (M205 S)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1145
-msgid "Minimum travel feedrate"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1147
-msgid "Minimum travel feedrate (M205 T)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1156
-msgid "Maximum acceleration when extruding"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1158
-msgid "Maximum acceleration when extruding (M204 S)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1167
-msgid "Maximum acceleration when retracting"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1169
-msgid "Maximum acceleration when retracting (M204 T)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1177 src/libslic3r/PrintConfig.cpp:1186
-msgid "Max"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1178
-msgid "This setting represents the maximum speed of your fan."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1187
-#, possible-c-format
-msgid ""
-"This is the highest printable layer height for this extruder, used to cap "
-"the variable layer height and support layer height. Maximum recommended "
-"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
-"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1197
-msgid "Max print speed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1198
-msgid ""
-"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
-"speed in order to keep constant extruder pressure. This experimental setting "
-"is used to set the highest print speed you want to allow."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1208
-msgid ""
-"This experimental setting is used to set the maximum volumetric speed your "
-"extruder supports."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1217
-msgid "Max volumetric slope positive"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1218 src/libslic3r/PrintConfig.cpp:1229
-msgid ""
-"This experimental setting is used to limit the speed of change in extrusion "
-"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
-"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
-"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1222 src/libslic3r/PrintConfig.cpp:1233
-msgid "mm³/s²"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1228
-msgid "Max volumetric slope negative"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1240 src/libslic3r/PrintConfig.cpp:1249
-msgid "Min"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1241
-msgid "This setting represents the minimum PWM your fan needs to work."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1250
-msgid ""
-"This is the lowest printable layer height for this extruder and limits the "
-"resolution for variable layer height. Typical values are between 0.05 mm and "
-"0.1 mm."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1258
-msgid "Min print speed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1259
-msgid "Slic3r will not scale speed down below this speed."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1266
-msgid "Minimal filament extrusion length"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1267
-msgid ""
-"Generate no less than the number of skirt loops required to consume the "
-"specified amount of filament on the bottom layer. For multi-extruder "
-"machines, this minimum applies to each extruder."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1276
-msgid "Configuration notes"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1277
-msgid ""
-"You can put here your personal notes. This text will be added to the G-code "
-"header comments."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1286
-msgid "Nozzle diameter"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1287
-msgid ""
-"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1292
-msgid "Host Type"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1293
-msgid ""
-"Slic3r can upload G-code files to a printer host. This field must contain "
-"the kind of the host."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1304
-msgid "Only retract when crossing perimeters"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1305
-msgid ""
-"Disables retraction when the travel path does not exceed the upper layer's "
-"perimeters (and thus any ooze will be probably invisible)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1312
-msgid ""
-"This option will drop the temperature of the inactive extruders to prevent "
-"oozing. It will enable a tall skirt automatically and move extruders outside "
-"such skirt when changing temperatures."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1319
-msgid "Output filename format"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1320
-msgid ""
-"You can use all configuration options as variables inside this template. For "
-"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
-"[year], [month], [day], [hour], [minute], [second], [version], "
-"[input_filename], [input_filename_base]."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1329
-msgid "Detect bridging perimeters"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1331
-msgid ""
-"Experimental option to adjust flow for overhangs (bridge flow will be used), "
-"to apply bridge speed to them and enable fan."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1337
-msgid "Filament parking position"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1338
-msgid ""
-"Distance of the extruder tip from the position where the filament is parked "
-"when unloaded. This should match the value in printer firmware."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1346
-msgid "Extra loading distance"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1347
-msgid ""
-"When set to zero, the distance the filament is moved from parking position "
-"during load is exactly the same as it was moved back during unload. When "
-"positive, it is loaded further,  if negative, the loading move is shorter "
-"than unloading."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1355 src/libslic3r/PrintConfig.cpp:1373
-#: src/libslic3r/PrintConfig.cpp:1385 src/libslic3r/PrintConfig.cpp:1395
-msgid "Perimeters"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1356
-msgid ""
-"This is the acceleration your printer will use for perimeters. A high value "
-"like 9000 usually gives good results if your hardware is up to the job. Set "
-"zero to disable acceleration control for perimeters."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1364
-msgid "Perimeter extruder"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1366
-msgid ""
-"The extruder to use when printing perimeters and brim. First extruder is 1."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1375
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for perimeters. "
-"You may want to use thinner extrudates to get more accurate surfaces. If "
-"left zero, default extrusion width will be used if set, otherwise 1.125 x "
-"nozzle diameter will be used. If expressed as percentage (for example 200%) "
-"it will be computed over layer height."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1387
-msgid ""
-"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1397
-msgid ""
-"This option sets the number of perimeters to generate for each layer. Note "
-"that Slic3r may increase this number automatically when it detects sloping "
-"surfaces which benefit from a higher number of perimeters if the Extra "
-"Perimeters option is enabled."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1401
-msgid "(minimum)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1409
-msgid ""
-"If you want to process the output G-code through custom scripts, just list "
-"their absolute paths here. Separate multiple scripts with a semicolon. "
-"Scripts will be passed the absolute path to the G-code file as the first "
-"argument, and they can access the Slic3r config settings by reading "
-"environment variables."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1421
-msgid "Printer type"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1422
-msgid "Type of the printer."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1427
-msgid "Printer notes"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1428
-msgid "You can put your notes regarding the printer here."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1436
-msgid "Printer vendor"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1437
-msgid "Name of the printer vendor."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1442
-msgid "Printer variant"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1443
-msgid ""
-"Name of the printer variant. For example, the printer variants may be "
-"differentiated by a nozzle diameter."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1456
-msgid "Raft layers"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1458
-msgid ""
-"The object will be raised by this number of layers, and support material "
-"will be generated under it."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1466
-msgid "Resolution"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1467
-msgid ""
-"Minimum detail resolution, used to simplify the input file for speeding up "
-"the slicing job and reducing memory usage. High-resolution models often "
-"carry more detail than printers can render. Set to zero to disable any "
-"simplification and use full resolution from input."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1477
-msgid "Minimum travel after retraction"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1478
-msgid ""
-"Retraction is not triggered when travel moves are shorter than this length."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1484
-msgid "Retract amount before wipe"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1485
-msgid ""
-"With bowden extruders, it may be wise to do some amount of quick retract "
-"before doing the wipe movement."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1492
-msgid "Retract on layer change"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1493
-msgid "This flag enforces a retraction whenever a Z move is done."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1498 src/libslic3r/PrintConfig.cpp:1506
-msgid "Length"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1499
-msgid "Retraction Length"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1500
-msgid ""
-"When retraction is triggered, filament is pulled back by the specified "
-"amount (the length is measured on raw filament, before it enters the "
-"extruder)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1511
-msgid "mm (zero to disable)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1507
-msgid "Retraction Length (Toolchange)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1508
-msgid ""
-"When retraction is triggered before changing tool, filament is pulled back "
-"by the specified amount (the length is measured on raw filament, before it "
-"enters the extruder)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1516
-msgid "Lift Z"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1517
-msgid ""
-"If you set this to a positive value, Z is quickly raised every time a "
-"retraction is triggered. When using multiple extruders, only the setting for "
-"the first extruder will be considered."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1524
-msgid "Above Z"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1525
-msgid "Only lift Z above"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1526
-msgid ""
-"If you set this to a positive value, Z lift will only take place above the "
-"specified absolute Z. You can tune this setting for skipping lift on the "
-"first layers."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1533
-msgid "Below Z"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1534
-msgid "Only lift Z below"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1535
-msgid ""
-"If you set this to a positive value, Z lift will only take place below the "
-"specified absolute Z. You can tune this setting for limiting lift to the "
-"first layers."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1551
-msgid "Extra length on restart"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1544
-msgid ""
-"When the retraction is compensated after the travel move, the extruder will "
-"push this additional amount of filament. This setting is rarely needed."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1552
-msgid ""
-"When the retraction is compensated after changing tool, the extruder will "
-"push this additional amount of filament."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1559 src/libslic3r/PrintConfig.cpp:1560
-msgid "Retraction Speed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1561
-msgid "The speed for retractions (it only applies to the extruder motor)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1567 src/libslic3r/PrintConfig.cpp:1568
-msgid "Deretraction Speed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1569
-msgid ""
-"The speed for loading of a filament into extruder after retraction (it only "
-"applies to the extruder motor). If left to zero, the retraction speed is "
-"used."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1576
-msgid "Seam position"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1578
-msgid "Position of perimeters starting points."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1584
-msgid "Random"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1585
-msgid "Nearest"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1586
-msgid "Aligned"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1594
-msgid "Direction"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1596
-msgid "Preferred direction of the seam"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1597
-msgid "Seam preferred direction"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1604
-msgid "Jitter"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1606
-msgid "Seam preferred direction jitter"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1607
-msgid "Preferred direction of the seam - jitter"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1617
-msgid "USB/serial port for printer connection."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1624
-msgid "Serial port speed"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1625
-msgid "Speed (baud) of USB/serial port for printer connection."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1634
-msgid "Distance from object"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1635
-msgid ""
-"Distance between skirt and object(s). Set this to zero to attach the skirt "
-"to the object(s) and get a brim for better adhesion."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1642
-msgid "Skirt height"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1643
-msgid ""
-"Height of skirt expressed in layers. Set this to a tall value to use skirt "
-"as a shield against drafts."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1650
-msgid "Loops (minimum)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1651
-msgid "Skirt Loops"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1652
-msgid ""
-"Number of loops for the skirt. If the Minimum Extrusion Length option is "
-"set, the number of loops might be greater than the one configured here. Set "
-"this to zero to disable skirt completely."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1660
-msgid "Slow down if layer print time is below"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1661
-msgid ""
-"If layer print time is estimated below this number of seconds, print moves "
-"speed will be scaled down to extend duration to this value."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1671
-msgid "Small perimeters"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1673
-msgid ""
-"This separate setting will affect the speed of perimeters having radius <= "
-"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
-"be calculated on the perimeters speed setting above. Set to zero for auto."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1683
-msgid "Solid infill threshold area"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1685
-msgid ""
-"Force solid infill for regions having a smaller area than the specified "
-"threshold."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1686
-msgid "mm²"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1692
-msgid "Solid infill extruder"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1694
-msgid "The extruder to use when printing solid infill."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1700
-msgid "Solid infill every"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1702
-msgid ""
-"This feature allows to force a solid layer every given number of layers. "
-"Zero to disable. You can set this to any value (for example 9999); Slic3r "
-"will automatically choose the maximum possible number of layers to combine "
-"according to nozzle diameter and layer height."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1714
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for infill for "
-"solid surfaces. If left zero, default extrusion width will be used if set, "
-"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
-"(for example 90%) it will be computed over layer height."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1724
-msgid ""
-"Speed for printing solid regions (top/bottom/internal horizontal shells). "
-"This can be expressed as a percentage (for example: 80%) over the default "
-"infill speed above. Set to zero for auto."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1736
-msgid "Number of solid layers to generate on top and bottom surfaces."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1742
-msgid "Spiral vase"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1743
-msgid ""
-"This feature will raise Z gradually while printing a single-walled object in "
-"order to remove any visible seam. This option requires a single perimeter, "
-"no infill, no top solid layers and no support material. You can still set "
-"any number of bottom solid layers as well as skirt/brim loops. It won't work "
-"when printing more than an object."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1751
-msgid "Temperature variation"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1752
-msgid ""
-"Temperature difference to be applied when an extruder is not active. Enables "
-"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
-"wiped."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1762
-msgid ""
-"This start procedure is inserted at the beginning, after bed has reached the "
-"target temperature and extruder just started heating, and before extruder "
-"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
-"such commands will not be prepended automatically so you're free to "
-"customize the order of heating commands and other custom actions. Note that "
-"you can use placeholder variables for all Slic3r settings, so you can put a "
-"\"M109 S[first_layer_temperature]\" command wherever you want."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1777
-msgid ""
-"This start procedure is inserted at the beginning, after any printer start "
-"gcode. This is used to override settings for a specific filament. If Slic3r "
-"detects M104, M109, M140 or M190 in your custom codes, such commands will "
-"not be prepended automatically so you're free to customize the order of "
-"heating commands and other custom actions. Note that you can use placeholder "
-"variables for all Slic3r settings, so you can put a \"M109 "
-"S[first_layer_temperature]\" command wherever you want. If you have multiple "
-"extruders, the gcode is processed in extruder order."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1792
-msgid "Single Extruder Multi Material"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1793
-msgid "The printer multiplexes filaments into a single hot end."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1798
-msgid "Prime all printing extruders"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1799
-msgid ""
-"If enabled, all printing extruders will be primed at the front edge of the "
-"print bed at the start of the print."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1804
-msgid "Generate support material"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1806
-msgid "Enable support material generation."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1810
-msgid "Auto generated supports"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1812
-msgid ""
-"If checked, supports will be generated automatically based on the overhang "
-"threshold value. If unchecked, supports will be generated inside the "
-"\"Support Enforcer\" volumes only."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1818
-msgid "XY separation between an object and its support"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1820
-msgid ""
-"XY separation between an object and its support. If expressed as percentage "
-"(for example 50%), it will be calculated over external perimeter width."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1830
-msgid "Pattern angle"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1832
-msgid ""
-"Use this setting to rotate the support material pattern on the horizontal "
-"plane."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1842 src/libslic3r/PrintConfig.cpp:2450
-msgid ""
-"Only create support if it lies on a build plate. Don't create support on a "
-"print."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1848
-msgid "Contact Z distance"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1850
-msgid ""
-"The vertical distance between object and support material interface. Setting "
-"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
-"first object layer."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1857
-msgid "0 (soluble)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1858
-msgid "0.2 (detachable)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1863
-msgid "Enforce support for the first"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1865
-msgid ""
-"Generate support material for the specified number of layers counting from "
-"bottom, regardless of whether normal support material is enabled or not and "
-"regardless of any angle threshold. This is useful for getting more adhesion "
-"of objects having a very thin or poor footprint on the build plate."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1870
-msgid "Enforce support for the first n layers"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1876
-msgid "Support material/raft/skirt extruder"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1878
-msgid ""
-"The extruder to use when printing support material, raft and skirt (1+, 0 to "
-"use the current extruder to minimize tool changes)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1887
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for support "
-"material. If left zero, default extrusion width will be used if set, "
-"otherwise nozzle diameter will be used. If expressed as percentage (for "
-"example 90%) it will be computed over layer height."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1895
-msgid "Interface loops"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1897
-msgid ""
-"Cover the top contact layer of the supports with loops. Disabled by default."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1902
-msgid "Support material/raft interface extruder"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1904
-msgid ""
-"The extruder to use when printing support material interface (1+, 0 to use "
-"the current extruder to minimize tool changes). This affects raft too."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1911
-msgid "Interface layers"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1913
-msgid ""
-"Number of interface layers to insert between the object(s) and support "
-"material."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1920
-msgid "Interface pattern spacing"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1922
-msgid "Spacing between interface lines. Set zero to get a solid interface."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1931
-msgid ""
-"Speed for printing support material interface layers. If expressed as "
-"percentage (for example 50%) it will be calculated over support material "
-"speed."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1940
-msgid "Pattern"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1942
-msgid "Pattern used to generate support material."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1948
-msgid "Rectilinear grid"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1954
-msgid "Pattern spacing"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1956
-msgid "Spacing between support material lines."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1965
-msgid "Speed for printing support material."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1972
-msgid "Synchronize with object layers"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1974
-msgid ""
-"Synchronize support layers with the object print layers. This is useful with "
-"multi-material printers, where the extruder switch is expensive."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1980
-msgid "Overhang threshold"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1982
-msgid ""
-"Support material will not be generated for overhangs whose slope angle (90° "
-"= vertical) is above the given threshold. In other words, this value "
-"represent the most horizontal slope (measured from the horizontal plane) "
-"that you can print without support material. Set to zero for automatic "
-"detection (recommended)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1994
-msgid "With sheath around the support"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:1996
-msgid ""
-"Add a sheath (a single perimeter line) around the base support. This makes "
-"the support more reliable, but also more difficult to remove."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2003
-msgid ""
-"Extruder temperature for layers after the first one. Set this to zero to "
-"disable temperature control commands in the output."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2011
-msgid "Detect thin walls"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2013
-msgid ""
-"Detect single-width walls (parts where two extrusions don't fit and we need "
-"to collapse them into a single trace)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2019
-msgid "Threads"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2020
-msgid ""
-"Threads are used to parallelize long-running tasks. Optimal threads number "
-"is slightly above the number of available cores/processors."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2032
-msgid ""
-"This custom code is inserted right before every extruder change. Note that "
-"you can use placeholder variables for all Slic3r settings as well as "
-"[previous_extruder] and [next_extruder]."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2044
-msgid ""
-"Set this to a non-zero value to set a manual extrusion width for infill for "
-"top surfaces. You may want to use thinner extrudates to fill all narrow "
-"regions and get a smoother finish. If left zero, default extrusion width "
-"will be used if set, otherwise nozzle diameter will be used. If expressed as "
-"percentage (for example 90%) it will be computed over layer height."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2055
-msgid ""
-"Speed for printing top solid layers (it only applies to the uppermost "
-"external layers and not to their internal solid layers). You may want to "
-"slow down this to get a nicer surface finish. This can be expressed as a "
-"percentage (for example: 80%) over the solid infill speed above. Set to zero "
-"for auto."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2070
-msgid "Number of solid layers to generate on top surfaces."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2071
-msgid "Top solid layers"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2077
-msgid "Speed for travel moves (jumps between distant extrusion points)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2085
-msgid "Use firmware retraction"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2086
-msgid ""
-"This experimental setting uses G10 and G11 commands to have the firmware "
-"handle the retraction. This is only supported in recent Marlin."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2092
-msgid "Use relative E distances"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2093
-msgid ""
-"If your firmware requires relative E values, check this, otherwise leave it "
-"unchecked. Most firmwares use absolute values."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2099
-msgid "Use volumetric E"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2100
-msgid ""
-"This experimental setting uses outputs the E values in cubic millimeters "
-"instead of linear millimeters. If your firmware doesn't already know "
-"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
-"T0' in your start G-code in order to turn volumetric mode on and use the "
-"filament diameter associated to the filament selected in Slic3r. This is "
-"only supported in recent Marlin."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2110
-msgid "Enable variable layer height feature"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2111
-msgid ""
-"Some printers or printer setups may have difficulties printing with a "
-"variable layer height. Enabled by default."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2117
-msgid "Wipe while retracting"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2118
-msgid ""
-"This flag will move the nozzle while retracting to minimize the possible "
-"blob on leaky extruders."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2125
-msgid ""
-"Multi material printers may need to prime or purge extruders on tool "
-"changes. Extrude the excess material into the wipe tower."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2131
-msgid "Purging volumes - load/unload volumes"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2132
-msgid ""
-"This vector saves required volumes to change from/to each tool used on the "
-"wipe tower. These values are used to simplify creation of the full purging "
-"volumes below."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2138
-msgid "Purging volumes - matrix"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2139
-msgid ""
-"This matrix describes volumes (in cubic milimetres) required to purge the "
-"new filament on the wipe tower for any given pair of tools."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2148
-msgid "Position X"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2149
-msgid "X coordinate of the left front corner of a wipe tower"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2155
-msgid "Position Y"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2156
-msgid "Y coordinate of the left front corner of a wipe tower"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2163
-msgid "Width of a wipe tower"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2169
-msgid "Wipe tower rotation angle"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2170
-msgid "Wipe tower rotation angle with respect to x-axis."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2177
-msgid "Wipe into this object's infill"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2178
-msgid ""
-"Purging after toolchange will done inside this object's infills. This lowers "
-"the amount of waste but may result in longer print time  due to additional "
-"travel moves."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2185
-msgid "Wipe into this object"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2186
-msgid ""
-"Object will be used to purge the nozzle after a toolchange to save material "
-"that would otherwise end up in the wipe tower and decrease print time. "
-"Colours of the objects will be mixed as a result."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2192
-msgid "Maximal bridging distance"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2193
-msgid "Maximal distance between supports on sparse infill sections."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2199
-msgid "XY Size Compensation"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2201
-msgid ""
-"The object will be grown/shrunk in the XY plane by the configured value "
-"(negative = inwards, positive = outwards). This might be useful for fine-"
-"tuning hole sizes."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2209
-msgid "Z offset"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2210
-msgid ""
-"This value will be added (or subtracted) from all the Z coordinates in the "
-"output G-code. It is used to compensate for bad Z endstop position: for "
-"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
-"print bed, set this to -0.3 (or fix your endstop)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2227
-msgid "Display width"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2228
-msgid "Width of the display"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2233
-msgid "Display height"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2234
-msgid "Height of the display"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2239
-msgid "Number of pixels in"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2241
-msgid "Number of pixels in X"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2247
-msgid "Number of pixels in Y"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2252
-msgid "Display orientation"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2253
-msgid ""
-"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
-"will flip the meaning of display width and height parameters and the output "
-"images will be rotated by 90 degrees."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2259
-msgid "Landscape"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2260
-msgid "Portrait"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2265
-msgid "Fast"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2266
-msgid "Fast tilt"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2267
-msgid "Time of the fast tilt"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2274
-msgid "Slow"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2275
-msgid "Slow tilt"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2276
-msgid "Time of the slow tilt"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2283
-msgid "Area fill"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2284
-msgid ""
-"The percentage of the bed area. \n"
-"If the print area exceeds the specified value, \n"
-"then a slow tilt will be used, otherwise - a fast tilt"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2291 src/libslic3r/PrintConfig.cpp:2292
-#: src/libslic3r/PrintConfig.cpp:2293
-msgid "Printer scaling correction"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2299 src/libslic3r/PrintConfig.cpp:2300
-msgid "Printer absolute correction"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2301
-msgid ""
-"Will inflate or deflate the sliced 2D polygons according to the sign of the "
-"correction."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2307 src/libslic3r/PrintConfig.cpp:2308
-msgid "Printer gamma correction"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2309
-msgid ""
-"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
-"value of zero means thresholding with the threshold in the middle. This "
-"behaviour eliminates antialiasing without losing holes in polygons."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2321
-msgid "Initial layer height"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2327
-msgid "Faded layers"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2328
-msgid ""
-"Number of the layers needed for the exposure time fade from initial exposure "
-"time to the exposure time"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2335 src/libslic3r/PrintConfig.cpp:2336
-msgid "Exposure time"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2342 src/libslic3r/PrintConfig.cpp:2343
-msgid "Initial exposure time"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2349 src/libslic3r/PrintConfig.cpp:2350
-msgid "Correction for expansion"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2356
-msgid "SLA print material notes"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2357
-msgid "You can put your notes regarding the SLA print material here."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2365 src/libslic3r/PrintConfig.cpp:2376
-msgid "Default SLA material profile"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2387
-msgid "Generate supports"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2389
-msgid "Generate supports for the models"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2394
-msgid "Support head front diameter"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2396
-msgid "Diameter of the pointing side of the head"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2403
-msgid "Support head penetration"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2405
-msgid "How much the pinhead has to penetrate the model surface"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2412
-msgid "Support head width"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2414
-msgid "Width from the back sphere center to the front sphere center"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2422
-msgid "Support pillar diameter"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2424
-msgid "Diameter in mm of the support pillars"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2432
-msgid "Support pillar connection mode"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2433
-msgid ""
-"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
-"cross (double zig-zag) or dynamic which will automatically switch between "
-"the first two depending on the distance of the two pillars."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2441
-msgid "Zig-Zag"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2442
-msgid "Cross"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2443
-msgid "Dynamic"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2455
-msgid "Pillar widening factor"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2457
-msgid ""
-"Merging bridges or pillars into another pillars can increase the radius. "
-"Zero means no increase, one means full increase."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2466
-msgid "Support base diameter"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2468
-msgid "Diameter in mm of the pillar base"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2476
-msgid "Support base height"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2478
-msgid "The height of the pillar base cone"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2485
-msgid "Critical angle"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2487
-msgid "The default angle for connecting support sticks and junctions."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2495
-msgid "Max bridge length"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2497
-msgid "The max length of a bridge"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2504
-msgid "Max pillar linking distance"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2506
-msgid ""
-"The max distance of two pillars to get linked with each other. A zero value "
-"will prohibit pillar cascading."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2514
-msgid "Object elevation"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2516
-msgid "How much the supports should lift up the supported object."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2526
-msgid "This is a relative measure of support points density."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2532
-msgid "Minimal distance of the support points"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2534
-msgid "No support points will be placed closer than this threshold."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2540
-msgid "Use pad"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2542
-msgid "Add a pad underneath the supported model"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2547
-msgid "Pad wall thickness"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2549
-msgid "The thickness of the pad and its optional cavity walls."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2557
-msgid "Pad wall height"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2558
-msgid ""
-"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
-"when enabling this feature, as some resins may produce an extreme suction "
-"effect inside the cavity, which makes peeling the print off the vat foil "
-"difficult."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2571
-msgid "Max merge distance"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2573
-msgid ""
-"Some objects can get along with a few smaller pads instead of a single big "
-"one. This parameter defines how far the center of two smaller pads should "
-"be. If theyare closer, they will get merged into one pad."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2584
-msgid "Pad edge radius"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2593
-msgid "Pad wall slope"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2595
-msgid ""
-"The slope of the pad wall relative to the bed plane. 90 degrees means "
-"straight walls."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2957
-msgid "Export OBJ"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2958
-msgid "Export the model(s) as OBJ."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2969
-msgid "Export SLA"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2970
-msgid "Slice the model and export SLA printing layers as PNG."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2975
-msgid "Export 3MF"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2976
-msgid "Export the model(s) as 3MF."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2980
-msgid "Export AMF"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2981
-msgid "Export the model(s) as AMF."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2985
-msgid "Export STL"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2986
-msgid "Export the model(s) as STL."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2991
-msgid "Slice the model and export toolpaths as G-code."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2996
-msgid "Slice"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2997
-msgid ""
-"Slice the model as FFF or SLA based on the printer_technology configuration "
-"value."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3002
-msgid "Help"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3003
-msgid "Show this help."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3008
-msgid "Help (FFF options)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3009
-msgid "Show the full list of print/G-code configuration options."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3013
-msgid "Help (SLA options)"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3014
-msgid "Show the full list of SLA print configuration options."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3018
-msgid "Output Model Info"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3019
-msgid "Write information about the model to the console."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3023
-msgid "Save config file"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3024
-msgid "Save configuration to the specified file."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3034
-msgid "Align XY"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3035
-msgid "Align the model to the given point."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3040
-msgid "Cut model at the given Z."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3061
-msgid "Center"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3062
-msgid "Center the print around the given center."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3066
-msgid "Don't arrange"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3067
-msgid ""
-"Do not rearrange the given models before merging and keep their original XY "
-"coordinates."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3070
-msgid "Duplicate"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3071
-msgid "Multiply copies by this factor."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3075
-msgid "Duplicate by grid"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3076
-msgid "Multiply copies by creating a grid."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3079
-msgid "Merge"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3080
-msgid ""
-"Arrange the supplied models in a plate and merge them in a single model in "
-"order to perform actions once."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3085
-msgid ""
-"Try to repair any non-manifold meshes (this option is implicitly added "
-"whenever we need to slice the model to perform the requested action)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3089
-msgid "Rotation angle around the Z axis in degrees."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3093
-msgid "Rotate around X"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3094
-msgid "Rotation angle around the X axis in degrees."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3098
-msgid "Rotate around Y"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3099
-msgid "Rotation angle around the Y axis in degrees."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3104
-msgid "Scaling factor or percentage."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3109
-msgid ""
-"Detect unconnected parts in the given model(s) and split them into separate "
-"objects."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3112
-msgid "Scale to Fit"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3113
-msgid "Scale to fit the given volume."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3122
-msgid "Ignore non-existent config files"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3123
-msgid "Do not fail if a file supplied to --load does not exist."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3126
-msgid "Load config file"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3127
-msgid ""
-"Load configuration from the specified file. It can be used more than once to "
-"load options from multiple files."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3130
-msgid "Output File"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3131
-msgid ""
-"The file where the output will be written (if not specified, it will be "
-"based on the input file)."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3141
-msgid "Data directory"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3142
-msgid ""
-"Load and store settings at the given directory. This is useful for "
-"maintaining different profiles or including configurations from a network "
-"storage."
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3145
-msgid "Logging level"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3146
-msgid ""
-"Messages with severity lower or eqal to the loglevel will be printed out. 0:"
-"trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3151
-msgid "Render with a software renderer"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3152
-msgid ""
-"Render with a software renderer. The bundled MESA software renderer is "
-"loaded instead of the default OpenGL driver."
-msgstr ""
-
-#: src/libslic3r/PrintObject.cpp:110
-msgid "Processing triangulated mesh"
-msgstr ""
-
-#: src/libslic3r/PrintObject.cpp:141
-msgid "Generating perimeters"
-msgstr ""
-
-#: src/libslic3r/PrintObject.cpp:251
-msgid "Preparing infill"
-msgstr ""
-
-#: src/libslic3r/PrintObject.cpp:391
-msgid "Generating support material"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:176
-msgid "Mixed"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:396
-msgid "Height (mm)"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:398
-msgid "Width (mm)"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:400
-msgid "Speed (mm/s)"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:402
-msgid "Volumetric flow rate (mm3/s)"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:491
-msgid "Default print color"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:495
-#, possible-c-format
-msgid "up to %.2f mm"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:499
-#, possible-c-format
-msgid "above %.2f mm"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:504
-#, possible-c-format
-msgid "%.2f - %.2f mm"
-msgstr ""
diff --git a/src/PrusaSlicer.cpp b/src/PrusaSlicer.cpp
index 9527a9422..e5a11e4d0 100644
--- a/src/PrusaSlicer.cpp
+++ b/src/PrusaSlicer.cpp
@@ -568,7 +568,7 @@ bool CLI::setup(int argc, char **argv)
 void CLI::print_help(bool include_print_options, PrinterTechnology printer_technology) const 
 {
     boost::nowide::cout
-		<< SLIC3R_APP_NAME << " " << SLIC3R_BUILD << " " << "based on Slic3r"
+		<< SLIC3R_BUILD_ID << " " << "based on Slic3r"
 #ifdef SLIC3R_GUI
         << " (with GUI support)"
 #else /* SLIC3R_GUI */
diff --git a/src/libslic3r/libslic3r_version.h.in b/src/libslic3r/libslic3r_version.h.in
index 7c4a4b294..26a67362b 100644
--- a/src/libslic3r/libslic3r_version.h.in
+++ b/src/libslic3r/libslic3r_version.h.in
@@ -4,6 +4,6 @@
 #define SLIC3R_APP_NAME "@SLIC3R_APP_NAME@"
 #define SLIC3R_APP_KEY "@SLIC3R_APP_KEY@"
 #define SLIC3R_VERSION "@SLIC3R_VERSION@"
-#define SLIC3R_BUILD "@SLIC3R_BUILD@"
+#define SLIC3R_BUILD_ID "@SLIC3R_BUILD_ID@"
 
 #endif /* __SLIC3R_VERSION_H */
diff --git a/src/slic3r/GUI/MainFrame.cpp b/src/slic3r/GUI/MainFrame.cpp
index 22845df8a..128aba16d 100644
--- a/src/slic3r/GUI/MainFrame.cpp
+++ b/src/slic3r/GUI/MainFrame.cpp
@@ -33,7 +33,7 @@ namespace Slic3r {
 namespace GUI {
 
 MainFrame::MainFrame() :
-DPIFrame(NULL, wxID_ANY, wxString(SLIC3R_APP_NAME) + " " + wxString(SLIC3R_BUILD) + " " + _(L("based on Slic3r")), wxDefaultPosition, wxDefaultSize, wxDEFAULT_FRAME_STYLE, "mainframe"),
+DPIFrame(NULL, wxID_ANY, wxString(SLIC3R_BUILD_ID) + " " + _(L("based on Slic3r")), wxDefaultPosition, wxDefaultSize, wxDEFAULT_FRAME_STYLE, "mainframe"),
         m_printhost_queue_dlg(new PrintHostQueueDialog(this))
 {
     // Fonts were created by the DPIFrame constructor for the monitor, on which the window opened.
diff --git a/src/slic3r/GUI/SysInfoDialog.cpp b/src/slic3r/GUI/SysInfoDialog.cpp
index ebeadf9c1..052a5c12a 100644
--- a/src/slic3r/GUI/SysInfoDialog.cpp
+++ b/src/slic3r/GUI/SysInfoDialog.cpp
@@ -24,7 +24,7 @@ std::string get_main_info(bool format_as_html)
     if (!format_as_html)
         out << b_start << SLIC3R_APP_NAME << b_end << line_end;
     out << b_start << "Version:   "             << b_end << SLIC3R_VERSION << line_end;
-    out << b_start << "Build:     "             << b_end << SLIC3R_BUILD << line_end;
+    out << b_start << "Build:     "             << b_end << SLIC3R_BUILD_ID << line_end;
     out << line_end;
     out << b_start << "Operating System:    "   << b_end << wxPlatformInfo::Get().GetOperatingSystemFamilyName() << line_end;
     out << b_start << "System Architecture: "   << b_end << wxPlatformInfo::Get().GetArchName() << line_end;
diff --git a/version.inc b/version.inc
index ef49ce037..0f0d93403 100644
--- a/version.inc
+++ b/version.inc
@@ -4,7 +4,6 @@
 set(SLIC3R_APP_NAME "PrusaSlicer")
 set(SLIC3R_APP_KEY "PrusaSlicer")
 set(SLIC3R_VERSION "1.42.0-beta2")
-set(SLIC3R_BUILD "${SLIC3R_VERSION}+UNKNOWN")
-set(SLIC3R_BUILD_ID "${SLIC3R_BUILD_ID}")
+set(SLIC3R_BUILD_ID "PrusaSlicer-${SLIC3R_VERSION}+UNKNOWN")
 set(SLIC3R_RC_VERSION "1,42,0,0")
 set(SLIC3R_RC_VERSION_DOTS "1.42.0.0")
diff --git a/xs/xsp/XS.xsp b/xs/xsp/XS.xsp
index e6f252ca8..083d21d38 100644
--- a/xs/xsp/XS.xsp
+++ b/xs/xsp/XS.xsp
@@ -20,7 +20,7 @@ VERSION()
 SV*
 BUILD()
     CODE:
-        RETVAL = newSVpv(SLIC3R_BUILD, 0);
+        RETVAL = newSVpv(SLIC3R_BUILD_ID, 0);
     OUTPUT: RETVAL
 
 SV*