Sync with PrusaSlicer-settings
This commit is contained in:
rtyr
GitHub
parent
2e9b07202a
commit
0df83d91fc
2 changed files with 347 additions and 196 deletions
|
|
@ -1,181 +1,184 @@
|
||||||
min_slic3r_version = 2.4.0-alpha0
|
min_slic3r_version = 2.4.0-alpha0
|
||||||
1.4.0-alpha7 Updated brim_separation value. Updated Prusa MINI end g-code. Added Filamentworld filament profiles.
|
1.4.0-alpha8 Added material profiles for Prusament Resin. Detect bridging perimeters enabled by default.
|
||||||
1.4.0-alpha6 Added nozzle priming after M600. Added nozzle diameter checks for 0.8 nozzle printer profiles. Updated FW version. Increased number of top solid infill layers (0.2 layer height).
|
1.4.0-alpha7 Updated brim_separation value. Updated Prusa MINI end g-code. Added Filamentworld filament profiles.
|
||||||
1.4.0-alpha5 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
1.4.0-alpha6 Added nozzle priming after M600. Added nozzle diameter checks for 0.8 nozzle printer profiles. Updated FW version. Increased number of top solid infill layers (0.2 layer height).
|
||||||
1.4.0-alpha4 Decreased Area Fill (SL1S).
|
1.4.0-alpha5 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
||||||
1.4.0-alpha3 Updated SL1S tilt times.
|
1.4.0-alpha4 Decreased Area Fill (SL1S).
|
||||||
1.4.0-alpha2 Updated Prusa MINI machine limits.
|
1.4.0-alpha3 Updated SL1S tilt times.
|
||||||
1.4.0-alpha1 Added new SL1S resin profiles.
|
1.4.0-alpha2 Updated Prusa MINI machine limits.
|
||||||
1.4.0-alpha0 Bumped up config version.
|
1.4.0-alpha1 Added new SL1S resin profiles.
|
||||||
1.3.0-alpha2 Added SL1S SPEED profiles.
|
1.4.0-alpha0 Bumped up config version.
|
||||||
1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
|
1.3.0-alpha2 Added SL1S SPEED profiles.
|
||||||
1.3.0-alpha0 Disabled thick bridges, updated support settings.
|
1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
|
||||||
min_slic3r_version = 2.3.2-alpha0
|
1.3.0-alpha0 Disabled thick bridges, updated support settings.
|
||||||
1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
min_slic3r_version = 2.3.2-alpha0
|
||||||
1.3.0 Added SL1S SPEED profiles.
|
1.3.2 Added material profiles for Prusament Resin.
|
||||||
min_slic3r_version = 2.3.0-rc1
|
1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
|
||||||
1.2.8 Added multiple add:north and Extrudr filament profiles.
|
1.3.0 Added SL1S SPEED profiles.
|
||||||
1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
|
min_slic3r_version = 2.3.0-rc1
|
||||||
1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
|
1.2.9 Added material profiles for Prusament Resin.
|
||||||
1.2.5 Updated firmware version. Added filament profiles. Various improvements.
|
1.2.8 Added multiple add:north and Extrudr filament profiles.
|
||||||
1.2.4 Updated cost/density values in filament settings. Various changes in print settings.
|
1.2.7 Updated "Prusament PC Blend Carbon Fiber" profile for Prusa MINI.
|
||||||
1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
1.2.6 Added filament profile for "Prusament PC Blend Carbon Fiber".
|
||||||
1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
1.2.5 Updated firmware version. Added filament profiles. Various improvements.
|
||||||
1.2.1 Updated FW version for MK2.5 family printers.
|
1.2.4 Updated cost/density values in filament settings. Various changes in print settings.
|
||||||
1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
|
1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
||||||
min_slic3r_version = 2.3.0-beta2
|
1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||||
1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
|
1.2.1 Updated FW version for MK2.5 family printers.
|
||||||
min_slic3r_version = 2.3.0-beta0
|
1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version.
|
||||||
1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights.
|
min_slic3r_version = 2.3.0-beta2
|
||||||
min_slic3r_version = 2.3.0-alpha4
|
1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values.
|
||||||
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
min_slic3r_version = 2.3.0-beta0
|
||||||
1.2.0-alpha0 Added filament spool weights
|
1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights.
|
||||||
min_slic3r_version = 2.2.0-alpha3
|
min_slic3r_version = 2.3.0-alpha4
|
||||||
1.1.14 Updated firmware version.
|
1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||||
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
1.2.0-alpha0 Added filament spool weights
|
||||||
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
min_slic3r_version = 2.2.0-alpha3
|
||||||
1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
1.1.14 Updated firmware version.
|
||||||
1.1.10 Updated firmware version.
|
1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.
|
||||||
1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
|
1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles.
|
||||||
1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
|
1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
|
||||||
1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
|
1.1.10 Updated firmware version.
|
||||||
1.1.6 Updated firmware version for MK2.5/S and MK3/S.
|
1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials.
|
||||||
1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
|
1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles.
|
||||||
1.1.4 Added Prusament PC Blend filament profile.
|
1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles.
|
||||||
1.1.3 Added SLA material and filament profile
|
1.1.6 Updated firmware version for MK2.5/S and MK3/S.
|
||||||
1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
|
1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend
|
||||||
1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
|
1.1.4 Added Prusament PC Blend filament profile.
|
||||||
1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
|
1.1.3 Added SLA material and filament profile
|
||||||
1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
|
1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET.
|
||||||
1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS.
|
||||||
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
1.1.1-beta Updated for PrusaSlicer 2.2.0-beta
|
||||||
# so they will see the print bed.
|
1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc
|
||||||
max_slic3r_version = 2.2.0-alpha2
|
1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer.
|
||||||
min_slic3r_version = 2.2.0-alpha0
|
# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer,
|
||||||
1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
|
# so they will see the print bed.
|
||||||
1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
|
max_slic3r_version = 2.2.0-alpha2
|
||||||
min_slic3r_version = 2.1.1-beta0
|
min_slic3r_version = 2.2.0-alpha0
|
||||||
1.0.12 Updated firmware version.
|
1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles.
|
||||||
1.0.11 Updated firmware version.
|
1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0
|
||||||
1.0.10 Updated firmware version for MK2.5/S and MK3/S.
|
min_slic3r_version = 2.1.1-beta0
|
||||||
1.0.9 Updated firmware version for MK2.5/S and MK3/S.
|
1.0.12 Updated firmware version.
|
||||||
1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
|
1.0.11 Updated firmware version.
|
||||||
1.0.7 Updated layer height limits for MINI
|
1.0.10 Updated firmware version for MK2.5/S and MK3/S.
|
||||||
1.0.6 Added Prusa MINI profiles
|
1.0.9 Updated firmware version for MK2.5/S and MK3/S.
|
||||||
min_slic3r_version = 2.1.0-alpha0
|
1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog.
|
||||||
1.0.5 Added SLA materials
|
1.0.7 Updated layer height limits for MINI
|
||||||
1.0.4 Updated firmware version and 0.25mm nozzle profiles
|
1.0.6 Added Prusa MINI profiles
|
||||||
1.0.3 Added filament profiles
|
min_slic3r_version = 2.1.0-alpha0
|
||||||
1.0.2 Added SLA materials
|
1.0.5 Added SLA materials
|
||||||
1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
|
1.0.4 Updated firmware version and 0.25mm nozzle profiles
|
||||||
1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
|
1.0.3 Added filament profiles
|
||||||
1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
|
1.0.2 Added SLA materials
|
||||||
1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
|
1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers.
|
||||||
1.0.0-alpha2 Printer model and nozzle diameter check
|
1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports.
|
||||||
1.0.0-alpha1 Added Prusament ASA profile
|
1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament.
|
||||||
1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
|
1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times
|
||||||
min_slic3r_version = 1.42.0-alpha6
|
1.0.0-alpha2 Printer model and nozzle diameter check
|
||||||
0.8.11 Updated firmware version.
|
1.0.0-alpha1 Added Prusament ASA profile
|
||||||
0.8.10 Updated firmware version.
|
1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
|
||||||
0.8.9 Updated firmware version for MK2.5/S and MK3/S.
|
min_slic3r_version = 1.42.0-alpha6
|
||||||
0.8.8 Updated firmware version for MK2.5/S and MK3/S.
|
0.8.11 Updated firmware version.
|
||||||
0.8.7 Updated firmware version
|
0.8.10 Updated firmware version.
|
||||||
0.8.6 Updated firmware version for MK2.5/S and MK3/S
|
0.8.9 Updated firmware version for MK2.5/S and MK3/S.
|
||||||
0.8.5 Updated SL1 printer and material settings
|
0.8.8 Updated firmware version for MK2.5/S and MK3/S.
|
||||||
0.8.4 Added Prusament ASA profile
|
0.8.7 Updated firmware version
|
||||||
0.8.3 FW version and SL1 materials update
|
0.8.6 Updated firmware version for MK2.5/S and MK3/S
|
||||||
0.8.2 FFF and SL1 settings update
|
0.8.5 Updated SL1 printer and material settings
|
||||||
0.8.1 Output settings and SLA materials update
|
0.8.4 Added Prusament ASA profile
|
||||||
0.8.0 Updated for the PrusaSlicer 2.0.0 final release
|
0.8.3 FW version and SL1 materials update
|
||||||
0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
|
0.8.2 FFF and SL1 settings update
|
||||||
0.8.0-rc1 Updated SLA profiles
|
0.8.1 Output settings and SLA materials update
|
||||||
0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
|
0.8.0 Updated for the PrusaSlicer 2.0.0 final release
|
||||||
0.8.0-beta4 Updated SLA profiles
|
0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S
|
||||||
0.8.0-beta3 Updated SLA profiles
|
0.8.0-rc1 Updated SLA profiles
|
||||||
0.8.0-beta2 Updated SLA profiles
|
0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release
|
||||||
0.8.0-beta1 Updated SLA profiles
|
0.8.0-beta4 Updated SLA profiles
|
||||||
0.8.0-beta Updated SLA profiles
|
0.8.0-beta3 Updated SLA profiles
|
||||||
0.8.0-alpha9 Updated SLA and FFF profiles
|
0.8.0-beta2 Updated SLA profiles
|
||||||
0.8.0-alpha8 Updated SLA profiles
|
0.8.0-beta1 Updated SLA profiles
|
||||||
0.8.0-alpha7 Updated SLA profiles
|
0.8.0-beta Updated SLA profiles
|
||||||
0.8.0-alpha6 Updated SLA profiles
|
0.8.0-alpha9 Updated SLA and FFF profiles
|
||||||
min_slic3r_version = 1.42.0-alpha
|
0.8.0-alpha8 Updated SLA profiles
|
||||||
0.8.0-alpha Updated SLA profiles
|
0.8.0-alpha7 Updated SLA profiles
|
||||||
0.4.0-alpha4 Updated SLA profiles
|
0.8.0-alpha6 Updated SLA profiles
|
||||||
0.4.0-alpha3 Update of SLA profiles
|
min_slic3r_version = 1.42.0-alpha
|
||||||
0.4.0-alpha2 First SLA profiles
|
0.8.0-alpha Updated SLA profiles
|
||||||
min_slic3r_version = 1.41.3-alpha
|
0.4.0-alpha4 Updated SLA profiles
|
||||||
0.4.12 Updated firmware version for MK2.5/S and MK3/S.
|
0.4.0-alpha3 Update of SLA profiles
|
||||||
0.4.11 Updated firmware version for MK2.5/S and MK3/S.
|
0.4.0-alpha2 First SLA profiles
|
||||||
0.4.10 Updated firmware version
|
min_slic3r_version = 1.41.3-alpha
|
||||||
0.4.9 Updated firmware version for MK2.5/S and MK3/S
|
0.4.12 Updated firmware version for MK2.5/S and MK3/S.
|
||||||
0.4.8 MK2.5/3/S FW update
|
0.4.11 Updated firmware version for MK2.5/S and MK3/S.
|
||||||
0.4.7 MK2/S/MMU FW update
|
0.4.10 Updated firmware version
|
||||||
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
|
0.4.9 Updated firmware version for MK2.5/S and MK3/S
|
||||||
0.4.5 Enabled remaining time support for MK2/S/MMU1
|
0.4.8 MK2.5/3/S FW update
|
||||||
0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
0.4.7 MK2/S/MMU FW update
|
||||||
0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
0.4.6 Updated firmware versions for MK2.5/S and MK3/S
|
||||||
0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
0.4.5 Enabled remaining time support for MK2/S/MMU1
|
||||||
0.4.1 New MK2.5S and MK3S FW versions
|
0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||||
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||||
min_slic3r_version = 1.41.1
|
0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||||
0.3.11 Updated firmware version for MK2.5/S and MK3/S.
|
0.4.1 New MK2.5S and MK3S FW versions
|
||||||
0.3.10 Updated firmware version
|
0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||||
0.3.9 Updated firmware version for MK2.5/S and MK3/S
|
min_slic3r_version = 1.41.1
|
||||||
0.3.8 MK2.5/3/S FW update
|
0.3.11 Updated firmware version for MK2.5/S and MK3/S.
|
||||||
0.3.7 MK2/S/MMU FW update
|
0.3.10 Updated firmware version
|
||||||
0.3.6 Updated firmware versions for MK2.5 and MK3
|
0.3.9 Updated firmware version for MK2.5/S and MK3/S
|
||||||
0.3.5 New MK2.5 and MK3 FW versions
|
0.3.8 MK2.5/3/S FW update
|
||||||
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
0.3.7 MK2/S/MMU FW update
|
||||||
0.3.3 Prusament PETG released
|
0.3.6 Updated firmware versions for MK2.5 and MK3
|
||||||
0.3.2 New MK2.5 and MK3 FW versions
|
0.3.5 New MK2.5 and MK3 FW versions
|
||||||
0.3.1 New MK2.5 and MK3 FW versions
|
0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt
|
||||||
0.3.0 New MK2.5 and MK3 FW version
|
0.3.3 Prusament PETG released
|
||||||
min_slic3r_version = 1.41.0-alpha
|
0.3.2 New MK2.5 and MK3 FW versions
|
||||||
0.2.9 New MK2.5 and MK3 FW versions
|
0.3.1 New MK2.5 and MK3 FW versions
|
||||||
0.2.8 New MK2.5 and MK3 FW version
|
0.3.0 New MK2.5 and MK3 FW version
|
||||||
min_slic3r_version = 1.41.1
|
min_slic3r_version = 1.41.0-alpha
|
||||||
0.2.7 New MK2.5 and MK3 FW version
|
0.2.9 New MK2.5 and MK3 FW versions
|
||||||
0.2.6 Added MMU2 MK2.5 settings
|
0.2.8 New MK2.5 and MK3 FW version
|
||||||
min_slic3r_version = 1.41.0-alpha
|
min_slic3r_version = 1.41.1
|
||||||
0.2.5 Prusament is out - added prusament settings
|
0.2.7 New MK2.5 and MK3 FW version
|
||||||
0.2.4 Added soluble support profiles for MMU2
|
0.2.6 Added MMU2 MK2.5 settings
|
||||||
0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
|
min_slic3r_version = 1.41.0-alpha
|
||||||
0.2.2 Edited MMU2 Single mode purge line
|
0.2.5 Prusament is out - added prusament settings
|
||||||
0.2.1 Added PET and BVOH settings for MMU2
|
0.2.4 Added soluble support profiles for MMU2
|
||||||
0.2.0-beta5 Fixed MMU1 ramming parameters
|
0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit
|
||||||
0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
|
0.2.2 Edited MMU2 Single mode purge line
|
||||||
0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
|
0.2.1 Added PET and BVOH settings for MMU2
|
||||||
0.2.0-beta2 Edited first layer speed and wipe tower position
|
0.2.0-beta5 Fixed MMU1 ramming parameters
|
||||||
0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
|
0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower
|
||||||
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
|
0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2
|
||||||
0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
|
0.2.0-beta2 Edited first layer speed and wipe tower position
|
||||||
0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
|
0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles
|
||||||
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
|
0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets.
|
||||||
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
|
0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references
|
||||||
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
|
0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version
|
||||||
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
|
0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2
|
||||||
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers.
|
||||||
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost
|
||||||
min_slic3r_version = 1.40.0
|
0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material
|
||||||
0.1.18 Updated firmware version
|
0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0
|
||||||
0.1.17 Updated firmware version for MK2.5/S and MK3/S
|
0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters
|
||||||
0.1.16 MK2.5/3/S FW update
|
min_slic3r_version = 1.40.0
|
||||||
0.1.15 MK2/S/MMU FW update
|
0.1.18 Updated firmware version
|
||||||
0.1.14 Updated firmware versions for MK2.5 and MK3
|
0.1.17 Updated firmware version for MK2.5/S and MK3/S
|
||||||
0.1.13 New MK2.5 and MK3 FW versions
|
0.1.16 MK2.5/3/S FW update
|
||||||
0.1.12 New MK2.5 and MK3 FW versions
|
0.1.15 MK2/S/MMU FW update
|
||||||
0.1.11 fw version changed to 3.3.1
|
0.1.14 Updated firmware versions for MK2.5 and MK3
|
||||||
0.1.10 MK3 jerk and acceleration update
|
0.1.13 New MK2.5 and MK3 FW versions
|
||||||
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
0.1.12 New MK2.5 and MK3 FW versions
|
||||||
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
|
0.1.11 fw version changed to 3.3.1
|
||||||
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
|
0.1.10 MK3 jerk and acceleration update
|
||||||
0.1.6 Split the MK2.5 profile from the MK2S
|
0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles
|
||||||
min_slic3r_version = 1.40.0-beta
|
0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes
|
||||||
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
0.1.7 Fixed errors in 0.25mm and 0.6mm profiles
|
||||||
0.1.4 edited fw version, added z-raise after print
|
0.1.6 Split the MK2.5 profile from the MK2S
|
||||||
min_slic3r_version = 1.40.0-alpha
|
min_slic3r_version = 1.40.0-beta
|
||||||
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles
|
||||||
0.1.2 Wipe tower changes
|
0.1.4 edited fw version, added z-raise after print
|
||||||
0.1.1 Minor print speed adjustments
|
min_slic3r_version = 1.40.0-alpha
|
||||||
0.1.0 Initial
|
0.1.3 Fixed an incorrect position of the max_print_height parameter
|
||||||
|
0.1.2 Wipe tower changes
|
||||||
|
0.1.1 Minor print speed adjustments
|
||||||
|
0.1.0 Initial
|
||||||
|
|
|
||||||
|
|
@ -5,7 +5,7 @@
|
||||||
name = Prusa Research
|
name = Prusa Research
|
||||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||||
config_version = 1.4.0-alpha7
|
config_version = 1.4.0-alpha8
|
||||||
# Where to get the updates from?
|
# Where to get the updates from?
|
||||||
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
|
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
|
||||||
changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||||
|
|
@ -120,7 +120,7 @@ technology = SLA
|
||||||
family = SL1
|
family = SL1
|
||||||
bed_model = sl1_bed.stl
|
bed_model = sl1_bed.stl
|
||||||
bed_texture = sl1.svg
|
bed_texture = sl1.svg
|
||||||
default_materials = Prusa Orange Tough @0.05
|
default_materials = Prusa Orange Tough @0.05; Prusament Resin Tough Prusa Orange @0.05
|
||||||
|
|
||||||
[printer_model:SL1S]
|
[printer_model:SL1S]
|
||||||
name = Original Prusa SL1S SPEED
|
name = Original Prusa SL1S SPEED
|
||||||
|
|
@ -129,7 +129,7 @@ technology = SLA
|
||||||
family = SL1
|
family = SL1
|
||||||
bed_model = sl1s_bed.stl
|
bed_model = sl1s_bed.stl
|
||||||
bed_texture = sl1s.svg
|
bed_texture = sl1s.svg
|
||||||
default_materials = Prusa Orange Tough @0.05 SL1S
|
default_materials = Prusa Orange Tough @0.05 SL1S; Prusament Resin Tough Prusa Orange @0.05 SL1S
|
||||||
|
|
||||||
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
# All presets starting with asterisk, for example *common*, are intermediate and they will
|
||||||
# not make it into the user interface.
|
# not make it into the user interface.
|
||||||
|
|
@ -181,7 +181,7 @@ max_volumetric_extrusion_rate_slope_positive = 0
|
||||||
max_volumetric_speed = 0
|
max_volumetric_speed = 0
|
||||||
min_skirt_length = 4
|
min_skirt_length = 4
|
||||||
notes =
|
notes =
|
||||||
overhangs = 0
|
overhangs = 1
|
||||||
only_retract_when_crossing_perimeters = 0
|
only_retract_when_crossing_perimeters = 0
|
||||||
ooze_prevention = 0
|
ooze_prevention = 0
|
||||||
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
|
||||||
|
|
@ -395,6 +395,7 @@ top_solid_min_thickness = 1.2
|
||||||
bottom_solid_min_thickness = 0.8
|
bottom_solid_min_thickness = 0.8
|
||||||
single_extruder_multi_material_priming = 0
|
single_extruder_multi_material_priming = 0
|
||||||
thick_bridges = 1
|
thick_bridges = 1
|
||||||
|
overhangs = 0
|
||||||
|
|
||||||
[print:*soluble_support*]
|
[print:*soluble_support*]
|
||||||
overhangs = 1
|
overhangs = 1
|
||||||
|
|
@ -460,10 +461,10 @@ bridge_flow_ratio = 1
|
||||||
bridge_speed = 20
|
bridge_speed = 20
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
|
||||||
layer_height = 0.1
|
layer_height = 0.1
|
||||||
perimeter_acceleration = 800
|
perimeter_acceleration = 600
|
||||||
top_solid_layers = 9
|
top_solid_layers = 9
|
||||||
support_material_contact_distance = 0.17
|
support_material_contact_distance = 0.17
|
||||||
raft_contact_distance = 0.17
|
raft_contact_distance = 0.15
|
||||||
|
|
||||||
[print:*0.15mm*]
|
[print:*0.15mm*]
|
||||||
inherits = *common*
|
inherits = *common*
|
||||||
|
|
@ -619,6 +620,7 @@ support_material_contact_distance = 0.1
|
||||||
raft_contact_distance = 0.2
|
raft_contact_distance = 0.2
|
||||||
top_solid_infill_speed = 40
|
top_solid_infill_speed = 40
|
||||||
thick_bridges = 1
|
thick_bridges = 1
|
||||||
|
overhangs = 0
|
||||||
|
|
||||||
## MMU1 specific
|
## MMU1 specific
|
||||||
[print:0.15mm OPTIMAL SOLUBLE FULL]
|
[print:0.15mm OPTIMAL SOLUBLE FULL]
|
||||||
|
|
@ -704,7 +706,7 @@ small_perimeter_speed = 15
|
||||||
solid_infill_speed = 40
|
solid_infill_speed = 40
|
||||||
top_solid_infill_speed = 30
|
top_solid_infill_speed = 30
|
||||||
support_material_contact_distance = 0.08
|
support_material_contact_distance = 0.08
|
||||||
raft_contact_distance = 0.08
|
raft_contact_distance = 0.07
|
||||||
|
|
||||||
## MK2 - 0.6mm nozzle
|
## MK2 - 0.6mm nozzle
|
||||||
|
|
||||||
|
|
@ -772,6 +774,7 @@ single_extruder_multi_material_priming = 0
|
||||||
inherits = 0.35mm FAST
|
inherits = 0.35mm FAST
|
||||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4
|
||||||
single_extruder_multi_material_priming = 0
|
single_extruder_multi_material_priming = 0
|
||||||
|
overhangs = 0
|
||||||
|
|
||||||
## MK2.5 - MMU2 specific
|
## MK2.5 - MMU2 specific
|
||||||
|
|
||||||
|
|
@ -1013,7 +1016,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||||
fill_pattern = grid
|
fill_pattern = grid
|
||||||
fill_density = 20%
|
fill_density = 20%
|
||||||
support_material_contact_distance = 0.08
|
support_material_contact_distance = 0.08
|
||||||
raft_contact_distance = 0.08
|
raft_contact_distance = 0.07
|
||||||
|
|
||||||
## MK3 - 0.6mm nozzle
|
## MK3 - 0.6mm nozzle
|
||||||
|
|
||||||
|
|
@ -1028,7 +1031,7 @@ perimeter_speed = 45
|
||||||
solid_infill_speed = 70
|
solid_infill_speed = 70
|
||||||
top_solid_infill_speed = 45
|
top_solid_infill_speed = 45
|
||||||
support_material_contact_distance = 0.22
|
support_material_contact_distance = 0.22
|
||||||
raft_contact_distance = 0.22
|
raft_contact_distance = 0.2
|
||||||
bridge_flow_ratio = 1
|
bridge_flow_ratio = 1
|
||||||
|
|
||||||
[print:0.20mm DETAIL @0.6 nozzle MK3]
|
[print:0.20mm DETAIL @0.6 nozzle MK3]
|
||||||
|
|
@ -1042,7 +1045,7 @@ perimeter_speed = 45
|
||||||
solid_infill_speed = 70
|
solid_infill_speed = 70
|
||||||
top_solid_infill_speed = 45
|
top_solid_infill_speed = 45
|
||||||
support_material_contact_distance = 0.22
|
support_material_contact_distance = 0.22
|
||||||
raft_contact_distance = 0.22
|
raft_contact_distance = 0.2
|
||||||
bridge_flow_ratio = 1
|
bridge_flow_ratio = 1
|
||||||
|
|
||||||
[print:0.30mm QUALITY @0.6 nozzle MK3]
|
[print:0.30mm QUALITY @0.6 nozzle MK3]
|
||||||
|
|
@ -1311,7 +1314,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||||
fill_pattern = grid
|
fill_pattern = grid
|
||||||
fill_density = 20%
|
fill_density = 20%
|
||||||
support_material_contact_distance = 0.08
|
support_material_contact_distance = 0.08
|
||||||
raft_contact_distance = 0.08
|
raft_contact_distance = 0.07
|
||||||
|
|
||||||
# MINI - 0.6mm nozzle
|
# MINI - 0.6mm nozzle
|
||||||
|
|
||||||
|
|
@ -4496,7 +4499,31 @@ initial_exposure_time = 35
|
||||||
material_type = Tough
|
material_type = Tough
|
||||||
material_vendor = Monocure
|
material_vendor = Monocure
|
||||||
|
|
||||||
## Prusa
|
## Prusa Polymers 0.025
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Prusa Orange @0.025]
|
||||||
|
inherits = *common 0.025*
|
||||||
|
exposure_time = 5
|
||||||
|
initial_exposure_time = 35
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Rich Black @0.025]
|
||||||
|
inherits = *common 0.025*
|
||||||
|
exposure_time = 5
|
||||||
|
initial_exposure_time = 35
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Anthracite Grey @0.025]
|
||||||
|
inherits = *common 0.025*
|
||||||
|
exposure_time = 6
|
||||||
|
initial_exposure_time = 35
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
## Prusa 0.025
|
||||||
|
|
||||||
[sla_material:Prusa Orange Tough @0.025]
|
[sla_material:Prusa Orange Tough @0.025]
|
||||||
inherits = *common 0.025*
|
inherits = *common 0.025*
|
||||||
exposure_time = 6
|
exposure_time = 6
|
||||||
|
|
@ -5185,7 +5212,30 @@ initial_exposure_time = 35
|
||||||
material_type = Tough
|
material_type = Tough
|
||||||
material_vendor = Zortrax
|
material_vendor = Zortrax
|
||||||
|
|
||||||
## Prusa
|
## Prusa Polymers 0.05
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Prusa Orange @0.05]
|
||||||
|
inherits = *common 0.05*
|
||||||
|
exposure_time = 6
|
||||||
|
initial_exposure_time = 35
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Rich Black @0.05]
|
||||||
|
inherits = *common 0.05*
|
||||||
|
exposure_time = 6
|
||||||
|
initial_exposure_time = 35
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Anthracite Grey @0.05]
|
||||||
|
inherits = *common 0.05*
|
||||||
|
exposure_time = 7
|
||||||
|
initial_exposure_time = 35
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
## Prusa 0.05
|
||||||
|
|
||||||
[sla_material:Prusa Beige Tough @0.05]
|
[sla_material:Prusa Beige Tough @0.05]
|
||||||
inherits = *common 0.05*
|
inherits = *common 0.05*
|
||||||
|
|
@ -5447,7 +5497,30 @@ initial_exposure_time = 50
|
||||||
material_type = Tough
|
material_type = Tough
|
||||||
material_vendor = BlueCast
|
material_vendor = BlueCast
|
||||||
|
|
||||||
## Prusa
|
## Prusa Polymers 0.1
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Prusa Orange @0.1]
|
||||||
|
inherits = *common 0.1*
|
||||||
|
exposure_time = 13
|
||||||
|
initial_exposure_time = 45
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Rich Black @0.1]
|
||||||
|
inherits = *common 0.1*
|
||||||
|
exposure_time = 13
|
||||||
|
initial_exposure_time = 45
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Anthracite Grey @0.1]
|
||||||
|
inherits = *common 0.1*
|
||||||
|
exposure_time = 14
|
||||||
|
initial_exposure_time = 45
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
## Prusa 0.1
|
||||||
|
|
||||||
[sla_material:Prusa Orange Tough @0.1]
|
[sla_material:Prusa Orange Tough @0.1]
|
||||||
inherits = *common 0.1*
|
inherits = *common 0.1*
|
||||||
|
|
@ -5530,6 +5603,31 @@ material_vendor = Made for Prusa
|
||||||
|
|
||||||
## 0.025 SL1S
|
## 0.025 SL1S
|
||||||
|
|
||||||
|
## Prusa Polymers 0.025
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Prusa Orange @0.025 SL1S]
|
||||||
|
inherits = *0.025_sl1s*
|
||||||
|
exposure_time = 1.8
|
||||||
|
initial_exposure_time = 25
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Rich Black @0.025 SL1S]
|
||||||
|
inherits = *0.025_sl1s*
|
||||||
|
exposure_time = 1.8
|
||||||
|
initial_exposure_time = 25
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Anthracite Grey @0.025 SL1S]
|
||||||
|
inherits = *0.025_sl1s*
|
||||||
|
exposure_time = 2
|
||||||
|
initial_exposure_time = 25
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
## Made for Prusa 0.025
|
||||||
|
|
||||||
[sla_material:Prusa Orange Tough @0.025 SL1S]
|
[sla_material:Prusa Orange Tough @0.025 SL1S]
|
||||||
inherits = *0.025_sl1s*
|
inherits = *0.025_sl1s*
|
||||||
exposure_time = 1.8
|
exposure_time = 1.8
|
||||||
|
|
@ -5644,6 +5742,31 @@ material_vendor = Peopoly
|
||||||
|
|
||||||
## 0.05 SL1S
|
## 0.05 SL1S
|
||||||
|
|
||||||
|
## Prusa Polymers 0.05
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Prusa Orange @0.05 SL1S]
|
||||||
|
inherits = *0.05_sl1s*
|
||||||
|
exposure_time = 2
|
||||||
|
initial_exposure_time = 25
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Rich Black @0.05 SL1S]
|
||||||
|
inherits = *0.05_sl1s*
|
||||||
|
exposure_time = 2
|
||||||
|
initial_exposure_time = 25
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Anthracite Grey @0.05 SL1S]
|
||||||
|
inherits = *0.05_sl1s*
|
||||||
|
exposure_time = 2.4
|
||||||
|
initial_exposure_time = 25
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
## Made for Prusa 0.05
|
||||||
|
|
||||||
[sla_material:Prusa Orange Tough @0.05 SL1S]
|
[sla_material:Prusa Orange Tough @0.05 SL1S]
|
||||||
inherits = *0.05_sl1s*
|
inherits = *0.05_sl1s*
|
||||||
exposure_time = 2
|
exposure_time = 2
|
||||||
|
|
@ -5758,6 +5881,31 @@ material_vendor = Peopoly
|
||||||
|
|
||||||
## 0.1 SL1S
|
## 0.1 SL1S
|
||||||
|
|
||||||
|
## Prusa Polymers 0.1
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Prusa Orange @0.1 SL1S]
|
||||||
|
inherits = *0.1_sl1s*
|
||||||
|
exposure_time = 2.6
|
||||||
|
initial_exposure_time = 25
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Rich Black @0.1 SL1S]
|
||||||
|
inherits = *0.1_sl1s*
|
||||||
|
exposure_time = 2.6
|
||||||
|
initial_exposure_time = 25
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
[sla_material:Prusament Resin Tough Anthracite Grey @0.1 SL1S]
|
||||||
|
inherits = *0.1_sl1s*
|
||||||
|
exposure_time = 3
|
||||||
|
initial_exposure_time = 25
|
||||||
|
material_type = Tough
|
||||||
|
material_vendor = Prusa Polymers
|
||||||
|
|
||||||
|
## Made for Prusa 0.1
|
||||||
|
|
||||||
[sla_material:Prusa Orange Tough @0.1 SL1S]
|
[sla_material:Prusa Orange Tough @0.1 SL1S]
|
||||||
inherits = *0.1_sl1s*
|
inherits = *0.1_sl1s*
|
||||||
exposure_time = 2.6
|
exposure_time = 2.6
|
||||||
|
|
@ -6573,7 +6721,7 @@ nozzle_diameter = 0.6
|
||||||
max_layer_height = 0.40
|
max_layer_height = 0.40
|
||||||
min_layer_height = 0.15
|
min_layer_height = 0.15
|
||||||
default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
default_print_profile = 0.30mm QUALITY @0.6 nozzle MINI
|
||||||
retract_length = 3.5
|
retract_length = 3.2
|
||||||
retract_before_travel = 1.5
|
retract_before_travel = 1.5
|
||||||
|
|
||||||
[printer:Original Prusa MINI & MINI+ 0.8 nozzle]
|
[printer:Original Prusa MINI & MINI+ 0.8 nozzle]
|
||||||
|
|
|
||||||
Loading…
Add table
Reference in a new issue