diff --git a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini index 64af7d9b2..0b4dddb55 100644 --- a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini +++ b/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini @@ -1,103 +1,93 @@ # generated by Slic3r Prusa Edition 1.39.0.29-prusa3d-win64 on 2018-01-22 at 14:53:14 -[print:0.05mm DETAIL] +# All presets starting with asterisk, for example *common*, are intermediate and they will +# not make it into the user interface. + +# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle. +# All other print presets will derive from the *common* print preset. +[print:*common*] avoid_crossing_perimeters = 0 -bottom_solid_layers = 10 -bridge_acceleration = 300 +bridge_acceleration = 1000 bridge_angle = 0 -bridge_flow_ratio = 0.7 +bridge_flow_ratio = 0.8 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 complete_objects = 0 -default_acceleration = 500 +default_acceleration = 1000 dont_support_bridges = 1 elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 20 external_perimeters_first = 0 +external_perimeter_extrusion_width = 0.45 extra_perimeters = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.45 fill_angle = 45 -fill_density = 25% +fill_density = 20% fill_pattern = cubic -first_layer_acceleration = 500 +first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 30 -gap_fill_speed = 20 +gap_fill_speed = 40 gcode_comments = 0 -infill_acceleration = 800 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.5 +infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% -infill_speed = 30 interface_shells = 0 -layer_height = 0.05 -max_print_speed = 80 +max_print_speed = 100 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = +overhangs = 0 only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 300 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 30 -perimeters = 3 post_process = print_settings_id = raft_layers = 0 resolution = 0 seam_position = nearest +skirts = 1 skirt_distance = 2 skirt_height = 3 -skirts = 1 -small_perimeter_speed = 15 +small_perimeter_speed = 20 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 -solid_infill_speed = 30 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_extruder = 0 support_material_angle = 0 support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0.3 support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 support_material_interface_speed = 100% support_material_pattern = rectilinear -support_material_spacing = 1.5 -support_material_speed = 30 +support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 60% thin_walls = 0 -threads = 4 top_infill_extrusion_width = 0.45 -top_solid_infill_speed = 20 -top_solid_layers = 15 +top_solid_infill_speed = 40 travel_speed = 180 wipe_tower = 0 wipe_tower_per_color_wipe = 15 @@ -106,2367 +96,491 @@ wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 -[print:0.05mm DETAIL 0.25 nozzle] -avoid_crossing_perimeters = 0 +# Print parameters common to a 0.25mm diameter nozzle. +[print:*0.25nozzle*] +external_perimeter_extrusion_width = 0.25 +extrusion_width = 0.25 +first_layer_extrusion_width = 0.25 +infill_extrusion_width = 0.25 +perimeter_extrusion_width = 0.25 +solid_infill_extrusion_width = 0.25 +top_infill_extrusion_width = 0.25 +support_material_extrusion_width = 0.18 +support_material_interface_layers = 0 +support_material_interface_spacing = 0.15 +support_material_spacing = 1 +support_material_xy_spacing = 150% + +# Print parameters common to a 0.6mm diameter nozzle. +[print:*0.6nozzle*] +external_perimeter_extrusion_width = 0.61 +extrusion_width = 0.67 +first_layer_extrusion_width = 0.65 +infill_extrusion_width = 0.75 +perimeter_extrusion_width = 0.65 +solid_infill_extrusion_width = 0.65 +top_infill_extrusion_width = 0.6 + +[print:*0.05mm*] +inherits = *common* bottom_solid_layers = 10 bridge_acceleration = 300 -bridge_angle = 0 bridge_flow_ratio = 0.7 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 -complete_objects = 0 default_acceleration = 500 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0 external_perimeter_speed = 20 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.28 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic +fill_density = 25% first_layer_acceleration = 500 -first_layer_extrusion_width = 0.3 -first_layer_height = 0.2 -first_layer_speed = 30 gap_fill_speed = 20 -gcode_comments = 0 infill_acceleration = 800 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 20 -interface_shells = 0 +infill_speed = 30 +max_print_speed = 80 +small_perimeter_speed = 15 +solid_infill_speed = 30 +support_material_extrusion_width = 0.3 +support_material_interface_spacing = 0.2 +support_material_spacing = 1.5 layer_height = 0.05 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 perimeter_acceleration = 300 -perimeter_extruder = 1 +perimeter_speed = 30 +perimeters = 3 +support_material_contact_distance = 0.15 +support_material_speed = 30 +top_solid_infill_speed = 20 +top_solid_layers = 15 + +[print:0.05mm DETAIL] +inherits = *0.05mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 +infill_extrusion_width = 0.5 + +[print:0.05mm DETAIL MK3] +inherits = *0.05mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ +fill_pattern = grid +top_infill_extrusion_width = 0.4 + +[print:0.05mm DETAIL 0.25 nozzle] +inherits = *0.05mm*; *0.25nozzle* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 +external_perimeter_extrusion_width = 0 +extrusion_width = 0.28 +fill_density = 20% +first_layer_extrusion_width = 0.3 +infill_extrusion_width = 0 +infill_speed = 20 +max_print_speed = 100 perimeter_extrusion_width = 0 perimeter_speed = 20 perimeters = 4 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 small_perimeter_speed = 10 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 solid_infill_extrusion_width = 0 solid_infill_speed = 20 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0.18 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 0 -support_material_interface_spacing = 0.15 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 1 support_material_speed = 20 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 150% -thin_walls = 0 -threads = 4 top_infill_extrusion_width = 0 -top_solid_infill_speed = 20 -top_solid_layers = 15 -travel_speed = 200 -wipe_tower = 0 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 -[print:0.05mm DETAIL MK3] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 10 -bridge_acceleration = 300 -bridge_angle = 0 +[print:*0.10mm*] +inherits = *common* +bottom_solid_layers = 7 bridge_flow_ratio = 0.7 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ -complete_objects = 0 -default_acceleration = 500 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 20 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 25% -fill_pattern = grid -first_layer_acceleration = 500 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 20 -gcode_comments = 0 -infill_acceleration = 800 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 30 -interface_shells = 0 -layer_height = 0.05 -max_print_speed = 80 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 300 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 30 -perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 15 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 30 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 +layer_height = 0.1 +perimeter_acceleration = 800 support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0.3 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 1.5 -support_material_speed = 30 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 20 -top_solid_layers = 15 -travel_speed = 180 -wipe_tower = 0 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 +support_material_spacing = 2 +top_solid_layers = 9 [print:0.10mm DETAIL] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 7 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.7 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = +inherits = *0.10mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% infill_speed = 60 -interface_shells = 0 -layer_height = 0.1 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 perimeter_speed = 50 perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 solid_infill_speed = 50 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.45 -top_solid_infill_speed = 40 -top_solid_layers = 9 -travel_speed = 120 -wipe_tower = 0 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 - -[print:0.10mm DETAIL 0.25 nozzle] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 7 -bridge_acceleration = 600 -bridge_angle = 0 -bridge_flow_ratio = 0.7 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.25 -external_perimeter_speed = 20 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.25 -fill_angle = 45 -fill_density = 15% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.25 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 1600 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.25 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 40 -interface_shells = 0 -layer_height = 0.1 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 600 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.25 -perimeter_speed = 25 -perimeters = 4 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 10 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.25 -solid_infill_speed = 40 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0.18 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 0 -support_material_interface_spacing = 0.15 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 1 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 150% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.25 -top_solid_infill_speed = 30 -top_solid_layers = 9 -travel_speed = 120 -wipe_tower = 0 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.10mm DETAIL MK3] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 7 -bridge_acceleration = 1000 -bridge_angle = 0 +inherits = *0.10mm* bridge_flow_ratio = 0.8 bridge_speed = 30 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 35 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% fill_pattern = grid -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 infill_acceleration = 1500 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% infill_speed = 170 -interface_shells = 0 -layer_height = 0.1 max_print_speed = 170 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 perimeter_speed = 45 perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 solid_infill_speed = 170 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 50 -top_solid_layers = 9 -travel_speed = 170 -wipe_tower = 0 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 + +[print:0.10mm DETAIL 0.25 nozzle] +inherits = *0.10mm*; *0.25nozzle* +bridge_acceleration = 600 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 +external_perimeter_speed = 20 +fill_density = 15% +infill_acceleration = 1600 +infill_speed = 40 +perimeter_acceleration = 600 +perimeter_speed = 25 +perimeters = 4 +small_perimeter_speed = 10 +solid_infill_speed = 40 +top_solid_infill_speed = 30 + +[print:*0.15mm*] +inherits = *common* +bottom_solid_layers = 5 +external_perimeter_speed = 40 +infill_acceleration = 2000 +infill_speed = 60 +layer_height = 0.15 +perimeter_acceleration = 800 +perimeter_speed = 50 +perimeters = 3 +solid_infill_speed = 50 +support_material_contact_distance = 0.15 +support_material_interface_spacing = 0.2 +support_material_spacing = 2 +top_infill_extrusion_width = 0.4 +top_solid_layers = 7 [print:0.15mm 100mms Linear Advance] -avoid_crossing_perimeters = 0 +inherits = *0.15mm* bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_angle = 0 bridge_flow_ratio = 0.95 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 50 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% infill_speed = 100 -interface_shells = 0 -layer_height = 0.15 max_print_speed = 150 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 perimeter_speed = 60 perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 small_perimeter_speed = 30 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 solid_infill_speed = 100 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 support_material_speed = 60 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 top_solid_infill_speed = 70 top_solid_layers = 5 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.15mm OPTIMAL] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 5 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = +inherits = *0.15mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.15 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 50 -perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 50 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 top_infill_extrusion_width = 0.45 -top_solid_infill_speed = 40 -top_solid_layers = 7 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.15mm OPTIMAL 0.25 nozzle] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 5 +inherits = *0.15mm*; *0.25nozzle* bridge_acceleration = 600 -bridge_angle = 0 bridge_flow_ratio = 0.7 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.25 external_perimeter_speed = 20 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.25 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.25 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 infill_acceleration = 1600 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.25 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% infill_speed = 40 -interface_shells = 0 -layer_height = 0.15 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 perimeter_acceleration = 600 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.25 perimeter_speed = 25 perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 small_perimeter_speed = 10 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.25 solid_infill_speed = 40 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 1 support_material_extrusion_width = 0.2 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 0 -support_material_interface_spacing = 0.15 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 1 -support_material_speed = 50 -support_material_synchronize_layers = 0 support_material_threshold = 35 -support_material_with_sheath = 0 -support_material_xy_spacing = 150% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.25 top_solid_infill_speed = 30 -top_solid_layers = 7 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.15mm OPTIMAL 0.6 nozzle] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 5 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = +inherits = *0.15mm*; *0.6nozzle* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.61 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.67 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.65 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.75 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.15 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 -perimeter_speed = 50 -perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 -solid_infill_speed = 50 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.6 -top_solid_infill_speed = 40 -top_solid_layers = 7 -travel_speed = 120 wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.15mm OPTIMAL MK3] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 5 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.8 +inherits = *0.15mm* bridge_speed = 30 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 35 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% fill_pattern = grid -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 infill_acceleration = 1500 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% infill_speed = 170 -interface_shells = 0 -layer_height = 0.15 max_print_speed = 170 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 perimeter_speed = 45 perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 solid_infill_speed = 170 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 top_solid_infill_speed = 50 -top_solid_layers = 7 -travel_speed = 170 wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.15mm OPTIMAL SOLUBLE FULL] -avoid_crossing_perimeters = 0 +inherits = *0.15mm* bottom_solid_layers = 5 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 25 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.15 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode overhangs = 1 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 perimeter_speed = 40 -perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 skirts = 0 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 solid_infill_speed = 40 -spiral_vase = 0 -standby_temperature_delta = -5 support_material = 1 -support_material_angle = 0 -support_material_buildplate_only = 0 support_material_contact_distance = 0 -support_material_enforce_layers = 0 support_material_extruder = 4 support_material_extrusion_width = 0.45 -support_material_interface_contact_loops = 0 support_material_interface_extruder = 4 -support_material_interface_layers = 2 support_material_interface_spacing = 0.1 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 support_material_synchronize_layers = 1 support_material_threshold = 80 support_material_with_sheath = 1 support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 -top_solid_layers = 7 -travel_speed = 120 wipe_tower = 1 wipe_tower_per_color_wipe = 20 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.15mm OPTIMAL SOLUBLE INTERFACE] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 5 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 25 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.15 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 +inherits = 0.15mm OPTIMAL SOLUBLE FULL notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 1 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 40 -perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 0 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 40 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 1 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0 -support_material_enforce_layers = 0 support_material_extruder = 0 -support_material_extrusion_width = 0.45 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 4 support_material_interface_layers = 3 -support_material_interface_spacing = 0.1 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 1 -support_material_threshold = 80 support_material_with_sheath = 0 support_material_xy_spacing = 120% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.45 -top_solid_infill_speed = 30 -top_solid_layers = 7 -travel_speed = 120 + +[print:*0.20mm*] +inherits = *common* +bottom_solid_layers = 4 +bridge_flow_ratio = 0.95 +external_perimeter_speed = 40 +infill_acceleration = 2000 +infill_speed = 60 +layer_height = 0.2 +perimeter_acceleration = 800 +perimeter_speed = 50 +perimeters = 2 +solid_infill_speed = 50 +support_material_contact_distance = 0.15 +support_material_interface_spacing = 0.2 +support_material_spacing = 2 +top_infill_extrusion_width = 0.4 +top_solid_layers = 5 wipe_tower = 1 -wipe_tower_per_color_wipe = 20 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.20mm 100mms Linear Advance] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = +inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 50 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% infill_speed = 100 -interface_shells = 0 -layer_height = 0.2 max_print_speed = 150 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 perimeter_speed = 60 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 small_perimeter_speed = 30 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 solid_infill_speed = 100 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 support_material_speed = 60 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 top_solid_infill_speed = 70 -top_solid_layers = 5 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.20mm FAST MK3] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.8 +inherits = *0.20mm* bridge_speed = 30 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = +bridge_flow_ratio = 0.8 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 35 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% fill_pattern = grid -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 infill_acceleration = 1500 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% infill_speed = 170 -interface_shells = 0 -layer_height = 0.2 max_print_speed = 170 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 perimeter_speed = 45 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 solid_infill_speed = 170 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 top_solid_infill_speed = 50 -top_solid_layers = 5 -travel_speed = 170 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.20mm NORMAL] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = +inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.2 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 50 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 50 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 40 -top_solid_layers = 5 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.20mm NORMAL 0.6 nozzle] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_angle = 0 +inherits = *0.20mm*; *0.6nozzle* bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.61 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.67 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.65 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.75 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.2 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 -perimeter_speed = 50 perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 -solid_infill_speed = 50 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.6 -top_solid_infill_speed = 40 -top_solid_layers = 5 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.20mm NORMAL SOLUBLE FULL] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = +inherits = *0.20mm* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 30 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.2 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode overhangs = 1 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 perimeter_speed = 40 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 skirts = 0 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 solid_infill_speed = 40 -spiral_vase = 0 -standby_temperature_delta = -5 support_material = 1 -support_material_angle = 0 -support_material_buildplate_only = 0 support_material_contact_distance = 0 -support_material_enforce_layers = 0 support_material_extruder = 4 support_material_extrusion_width = 0.45 -support_material_interface_contact_loops = 0 support_material_interface_extruder = 4 -support_material_interface_layers = 2 support_material_interface_spacing = 0.1 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 support_material_synchronize_layers = 1 support_material_threshold = 80 support_material_with_sheath = 1 support_material_xy_spacing = 120% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 top_solid_infill_speed = 30 -top_solid_layers = 5 -travel_speed = 120 -wipe_tower = 1 wipe_tower_per_color_wipe = 20 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.20mm NORMAL SOLUBLE INTERFACE] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 30 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.2 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 +inherits = 0.20mm NORMAL SOLUBLE FULL notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 1 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 40 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 0 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 40 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 1 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0 -support_material_enforce_layers = 0 support_material_extruder = 0 -support_material_extrusion_width = 0.45 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 4 support_material_interface_layers = 3 -support_material_interface_spacing = 0.1 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 1 -support_material_threshold = 80 support_material_with_sheath = 0 -support_material_xy_spacing = 120% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 30 -top_solid_layers = 5 -travel_speed = 120 + +[print:*0.35mm*] +inherits = *common* +bottom_solid_layers = 3 +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 40 +first_layer_extrusion_width = 0.75 +infill_acceleration = 2000 +infill_extrusion_width = 0.75 +infill_speed = 60 +layer_height = 0.35 +perimeter_acceleration = 800 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +perimeters = 2 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 60 +support_material_contact_distance = 0.15 +support_material_interface_spacing = 0.2 +support_material_spacing = 2 +top_solid_infill_speed = 50 +top_solid_layers = 4 wipe_tower = 1 -wipe_tower_per_color_wipe = 20 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.35mm FAST] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 3 -bridge_acceleration = 1000 -bridge_angle = 0 +inherits = *0.35mm* bridge_flow_ratio = 0.95 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.6 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 infill_extrusion_width = 0.7 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.35 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 perimeter_extrusion_width = 0.43 -perimeter_speed = 50 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 solid_infill_extrusion_width = 0.7 -solid_infill_speed = 60 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 top_infill_extrusion_width = 0.43 -top_solid_infill_speed = 50 -top_solid_layers = 4 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.35mm FAST 0.6 nozzle] -avoid_crossing_perimeters = 0 +inherits = *0.35mm*; *0.6nozzle* bottom_solid_layers = 7 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.61 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.67 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.65 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.75 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.35 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 -perimeter_speed = 50 perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 -solid_infill_speed = 60 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.6 -top_solid_infill_speed = 50 top_solid_layers = 9 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.35mm FAST sol full 0.6 nozzle] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 3 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = +inherits = *0.35mm*; *0.6nozzle* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.6 external_perimeter_speed = 30 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.67 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.65 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.75 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.35 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode overhangs = 1 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 perimeter_speed = 40 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 skirts = 0 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 -solid_infill_speed = 60 -spiral_vase = 0 -standby_temperature_delta = -5 support_material = 1 -support_material_angle = 0 -support_material_buildplate_only = 0 support_material_contact_distance = 0 -support_material_enforce_layers = 0 support_material_extruder = 4 support_material_extrusion_width = 0.55 -support_material_interface_contact_loops = 0 support_material_interface_extruder = 4 support_material_interface_layers = 3 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 support_material_synchronize_layers = 1 support_material_threshold = 80 -support_material_with_sheath = 0 support_material_xy_spacing = 120% -thin_walls = 0 -threads = 4 top_infill_extrusion_width = 0.57 -top_solid_infill_speed = 50 -top_solid_layers = 4 -travel_speed = 120 -wipe_tower = 1 wipe_tower_per_color_wipe = 20 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 [print:0.35mm FAST sol int 0.6 nozzle] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 3 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.6 -external_perimeter_speed = 30 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.67 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.65 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.75 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.35 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 1 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 -perimeter_speed = 40 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 0 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 -solid_infill_speed = 60 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 1 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0 -support_material_enforce_layers = 0 +inherits = 0.35mm FAST sol full 0.6 nozzle support_material_extruder = 0 -support_material_extrusion_width = 0.55 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 4 support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 1 -support_material_threshold = 80 -support_material_with_sheath = 0 support_material_xy_spacing = 150% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.57 -top_solid_infill_speed = 50 -top_solid_layers = 4 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 20 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 -[filament:ColorFabb Brass Bronze] -bed_temperature = 60 -bridge_fan_speed = 100 -compatible_printers = -compatible_printers_condition = nozzle_diameter[0]>0.35 +[filament:*common*] cooling = 1 -disable_fan_first_layers = 1 +compatible_printers = +compatible_printers_condition = end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1.3 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #804040 +extrusion_multiplier = 1 filament_cost = 0 filament_density = 0 filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" filament_settings_id = filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 60 -first_layer_temperature = 210 -max_fan_speed = 100 -min_fan_speed = 100 min_print_speed = 5 slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" + +[filament:*PLA*] +inherits = *common* +bed_temperature = 60 +bridge_fan_speed = 100 +disable_fan_first_layers = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_max_volumetric_speed = 15 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 100 temperature = 210 +[filament:*PET*] +inherits = *common* +bed_temperature = 90 +bridge_fan_speed = 50 +disable_fan_first_layers = 3 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_max_volumetric_speed = 10 +filament_type = PET +first_layer_bed_temperature = 85 +first_layer_temperature = 230 +max_fan_speed = 50 +min_fan_speed = 30 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" +temperature = 240 + +[filament:*ABS*] +inherits = *common* +bed_temperature = 100 +bridge_fan_speed = 30 +cooling = 0 +disable_fan_first_layers = 3 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_max_volumetric_speed = 13 +filament_type = ABS +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +max_fan_speed = 30 +min_fan_speed = 10 +temperature = 255 + +[filament:*FLEX*] +inherits = *common* +bridge_fan_speed = 100 +compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 +cooling = 0 +disable_fan_first_layers = 1 +extrusion_multiplier = 1.2 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_max_volumetric_speed = 1.5 +filament_type = FLEX +first_layer_bed_temperature = 50 +first_layer_temperature = 240 +max_fan_speed = 90 +min_fan_speed = 70 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 240 + +[filament:ColorFabb Brass Bronze] +inherits = *PLA* +compatible_printers_condition = nozzle_diameter[0]>0.35 +extrusion_multiplier = 1.3 +filament_colour = #804040 +filament_max_volumetric_speed = 10 +min_print_speed = 5 + [filament:ColorFabb HT] bed_temperature = 105 bridge_fan_speed = 30 @@ -2497,642 +611,173 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{el temperature = 270 [filament:ColorFabb PLA-PHA] -bed_temperature = 60 -bridge_fan_speed = 100 -compatible_printers = -compatible_printers_condition = -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 100 +inherits = *PLA* filament_colour = #FF3232 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 15 -filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 60 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 100 -min_print_speed = 15 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" -temperature = 210 [filament:ColorFabb Woodfil] -bed_temperature = 60 -bridge_fan_speed = 100 -compatible_printers = +inherits = *PLA* compatible_printers_condition = nozzle_diameter[0]>0.35 -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 1.2 -fan_always_on = 1 -fan_below_layer_time = 100 filament_colour = #804040 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 60 first_layer_temperature = 200 -max_fan_speed = 100 -min_fan_speed = 100 min_print_speed = 5 -slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 200 [filament:ColorFabb XT] -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -compatible_printers_condition = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 +inherits = *PET* filament_colour = #FF8000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 filament_type = PLA first_layer_bed_temperature = 90 first_layer_temperature = 260 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 270 [filament:ColorFabb XT-CF20] -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -compatible_printers_condition = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" +inherits = *PET* extrusion_multiplier = 1.2 -fan_always_on = 1 -fan_below_layer_time = 20 filament_colour = #804040 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 filament_max_volumetric_speed = 1 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PET first_layer_bed_temperature = 90 first_layer_temperature = 260 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 260 [filament:ColorFabb nGen] -bed_temperature = 85 +inherits = *PET* bridge_fan_speed = 40 -compatible_printers = -compatible_printers_condition = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 10 filament_colour = #FF8000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 filament_type = NGEN -first_layer_bed_temperature = 85 first_layer_temperature = 240 max_fan_speed = 35 min_fan_speed = 20 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" -temperature = 240 [filament:ColorFabb nGen flex] +inherits = *flex* bed_temperature = 85 bridge_fan_speed = 40 -compatible_printers = -compatible_printers_condition = cooling = 1 disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 1 -fan_always_on = 0 fan_below_layer_time = 10 filament_colour = #FF8000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 filament_max_volumetric_speed = 5 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = FLEX first_layer_bed_temperature = 85 first_layer_temperature = 260 max_fan_speed = 35 min_fan_speed = 20 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 260 [filament:E3D Edge] -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -compatible_printers_condition = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 +inherits = *PET* filament_colour = #FF8000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 85 -first_layer_temperature = 230 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" -temperature = 240 [filament:E3D PC-ABS] -bed_temperature = 100 -bridge_fan_speed = 30 -compatible_printers = -compatible_printers_condition = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 +inherits = *ABS* filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 100 first_layer_temperature = 270 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 270 [filament:Fillamentum ABS] -bed_temperature = 100 -bridge_fan_speed = 30 -compatible_printers = -compatible_printers_condition = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 +inherits = *ABS* filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS -first_layer_bed_temperature = 100 first_layer_temperature = 240 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 240 [filament:Fillamentum ASA] -bed_temperature = 100 -bridge_fan_speed = 30 -compatible_printers = -compatible_printers_condition = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 fan_always_on = 1 -fan_below_layer_time = 20 filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 100 first_layer_temperature = 265 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 265 [filament:Fillamentum CPE HG100 HM100] -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -compatible_printers_condition = -cooling = 1 +inherits = *PET* disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 filament_colour = #FF8000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 filament_notes = "CPE HG100 , CPE HM100" -filament_settings_id = -filament_soluble = 0 -filament_type = PET first_layer_bed_temperature = 90 first_layer_temperature = 275 max_fan_speed = 50 min_fan_speed = 50 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" temperature = 275 [filament:Fillamentum Timberfil] -bed_temperature = 60 -bridge_fan_speed = 100 -compatible_printers = +inherits = *PLA* compatible_printers_condition = nozzle_diameter[0]>0.35 -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 1.2 -fan_always_on = 1 -fan_below_layer_time = 100 filament_colour = #804040 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 60 first_layer_temperature = 190 -max_fan_speed = 100 -min_fan_speed = 100 -min_print_speed = 15 -slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 190 [filament:Generic ABS] -bed_temperature = 100 -bridge_fan_speed = 30 -compatible_printers = -compatible_printers_condition = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 +inherits = *ABS* filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS -first_layer_bed_temperature = 100 -first_layer_temperature = 255 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" -temperature = 255 [filament:Generic PET] -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -compatible_printers_condition = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #FF8000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +inherits = *PET* filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 85 -first_layer_temperature = 230 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" -temperature = 240 [filament:Generic PLA] -bed_temperature = 60 -bridge_fan_speed = 100 -compatible_printers = -compatible_printers_condition = -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF3232 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 15 +inherits = *PLA* filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 60 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 100 -min_print_speed = 15 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" -temperature = 210 [filament:Polymaker PC-Max] +inherits = *ABS* bed_temperature = 120 -bridge_fan_speed = 30 -compatible_printers = -compatible_printers_condition = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS first_layer_bed_temperature = 120 first_layer_temperature = 270 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" temperature = 270 [filament:Primavalue PVA] -bed_temperature = 60 -bridge_fan_speed = 100 -compatible_printers = -compatible_printers_condition = +inherits = *PLA* cooling = 0 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 fan_always_on = 0 -fan_below_layer_time = 100 filament_colour = #FFFFD7 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 filament_max_volumetric_speed = 10 filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH" -filament_settings_id = filament_soluble = 1 filament_type = PVA -first_layer_bed_temperature = 60 first_layer_temperature = 195 -max_fan_speed = 100 -min_fan_speed = 100 -min_print_speed = 15 -slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 195 [filament:Prusa ABS] -bed_temperature = 100 -bridge_fan_speed = 30 -compatible_printers = -compatible_printers_condition = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 +inherits = *ABS* filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS -first_layer_bed_temperature = 100 -first_layer_temperature = 255 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" -temperature = 255 [filament:Prusa HIPS] -bed_temperature = 100 +inherits = *ABS* bridge_fan_speed = 50 -compatible_printers = -compatible_printers_condition = cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" extrusion_multiplier = 0.9 fan_always_on = 1 fan_below_layer_time = 10 filament_colour = #FFFFD7 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "" -filament_settings_id = filament_soluble = 1 filament_type = HIPS -first_layer_bed_temperature = 100 first_layer_temperature = 220 max_fan_speed = 20 min_fan_speed = 20 -min_print_speed = 5 -slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 220 [filament:Prusa PET] -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -compatible_printers_condition = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #FF8000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 +inherits = *PET* filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 85 -first_layer_temperature = 230 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" -temperature = 240 [filament:Prusa PLA] -bed_temperature = 60 -bridge_fan_speed = 100 -compatible_printers = -compatible_printers_condition = -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 100 +inherits = *PLA* filament_colour = #FF3232 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 15 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 60 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 100 -min_print_speed = 15 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" -temperature = 210 [filament:SemiFlex or Flexfill 98A] -bed_temperature = 50 -bridge_fan_speed = 100 -compatible_printers = -compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 -cooling = 0 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1.2 -fan_always_on = 0 -fan_below_layer_time = 100 -filament_colour = #00CA0A -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 1.5 -filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88" -filament_settings_id = -filament_soluble = 0 -filament_type = FLEX -first_layer_bed_temperature = 50 -first_layer_temperature = 240 -max_fan_speed = 90 -min_fan_speed = 70 -min_print_speed = 5 -slowdown_below_layer_time = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" -temperature = 240 +inherits = *flex* [filament:Taulman Bridge] bed_temperature = 50 @@ -3164,33 +809,16 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{el temperature = 250 [filament:Taulman T-Glase] -bed_temperature = 90 +inherits = *PET* bridge_fan_speed = 40 -compatible_printers = -compatible_printers_condition = cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 fan_always_on = 0 -fan_below_layer_time = 20 filament_colour = #FF8000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PET first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 5 min_fan_speed = 0 -min_print_speed = 5 -slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" -temperature = 240 [filament:Verbatim BVOH] bed_temperature = 60 @@ -3250,7 +878,7 @@ slowdown_below_layer_time = 20 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" temperature = 220 -[printer:Original Prusa i3 MK2] +[printer:*common*] bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n between_objects_gcode = @@ -3290,284 +918,76 @@ variable_layer_height = 1 wipe = 1 z_offset = 0 +[printer:*multimaterial*] +inherits = *common* +deretract_speed = 50 +retract_before_travel = 3 +retract_before_wipe = 60% +retract_layer_change = 0 +retract_length = 4 +retract_length_toolchange = 4 +retract_lift = 0.6 +retract_lift_above = 0 +retract_lift_below = 199 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 80 +single_extruder_multi_material = 1 + +[printer:*mm-single*] +inherits = *multimaterial* +end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN +start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0 + +[printer:*mm-multi*] +inherits = *multimaterial* +end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors +extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259 +nozzle_diameter = 0.4,0.4,0.4,0.4 +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN +start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0 +variable_layer_height = 0 + +[printer:Original Prusa i3 MK2] +inherits = *common* + [printer:Original Prusa i3 MK2 0.25 nozzle] -bed_shape = 0x0,250x0,250x210,0x210 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -between_objects_gcode = -deretract_speed = 0 -end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors -extruder_colour = #FFFF00 -extruder_offset = 0x0 -gcode_flavor = marlin -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +inherits = *common* max_layer_height = 0.1 min_layer_height = 0.05 nozzle_diameter = 0.25 -octoprint_apikey = -octoprint_host = -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n -printer_settings_id = -retract_before_travel = 1 -retract_before_wipe = 0% -retract_layer_change = 1 retract_length = 1 -retract_length_toolchange = 3 -retract_lift = 0.6 -retract_lift_above = 0 -retract_lift_below = 199 -retract_restart_extra = 0 -retract_restart_extra_toolchange = 0 retract_speed = 50 -serial_port = -serial_speed = 250000 -single_extruder_multi_material = 0 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 -toolchange_gcode = -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 variable_layer_height = 0 -wipe = 1 -z_offset = 0 [printer:Original Prusa i3 MK2 0.6 nozzle] -bed_shape = 0x0,250x0,250x210,0x210 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -between_objects_gcode = -deretract_speed = 0 -end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors -extruder_colour = #FFFF00 -extruder_offset = 0x0 -gcode_flavor = marlin -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +inherits = *common* max_layer_height = 0.35 min_layer_height = 0.1 nozzle_diameter = 0.6 -octoprint_apikey = -octoprint_host = -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n -printer_settings_id = -retract_before_travel = 1 -retract_before_wipe = 0% -retract_layer_change = 1 -retract_length = 0.8 -retract_length_toolchange = 3 -retract_lift = 0.6 -retract_lift_above = 0 -retract_lift_below = 199 -retract_restart_extra = 0 -retract_restart_extra_toolchange = 0 -retract_speed = 35 -serial_port = -serial_speed = 250000 -single_extruder_multi_material = 0 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 -toolchange_gcode = -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 -variable_layer_height = 1 -wipe = 1 -z_offset = 0 [printer:Original Prusa i3 MK2 MM Single Mode] -bed_shape = 0x0,250x0,250x210,0x210 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -between_objects_gcode = -deretract_speed = 50 -end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n -extruder_colour = #FFAA55 -extruder_offset = 0x0 -gcode_flavor = marlin -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] -max_layer_height = 0.25 -min_layer_height = 0.07 -nozzle_diameter = 0.4 -octoprint_apikey = -octoprint_host = -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN -printer_settings_id = -retract_before_travel = 3 -retract_before_wipe = 60% -retract_layer_change = 0 -retract_length = 4 -retract_length_toolchange = 6 -retract_lift = 0.6 -retract_lift_above = 0 -retract_lift_below = 199 -retract_restart_extra = 0 -retract_restart_extra_toolchange = 0 -retract_speed = 80 -serial_port = -serial_speed = 250000 -single_extruder_multi_material = 1 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0 -toolchange_gcode = -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 -variable_layer_height = 1 -wipe = 1 -z_offset = 0 +inherits = *mm-single* [printer:Original Prusa i3 MK2 MM Single Mode 0.6 nozzle] -bed_shape = 0x0,250x0,250x210,0x210 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -between_objects_gcode = -deretract_speed = 50 -end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n -extruder_colour = #FFAA55 -extruder_offset = 0x0 -gcode_flavor = marlin -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] -max_layer_height = 0.25 -min_layer_height = 0.07 +inherits = *mm-single* nozzle_diameter = 0.6 -octoprint_apikey = -octoprint_host = -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN -printer_settings_id = -retract_before_travel = 3 -retract_before_wipe = 60% -retract_layer_change = 0 -retract_length = 4 -retract_length_toolchange = 6 -retract_lift = 0.6 -retract_lift_above = 0 -retract_lift_below = 199 -retract_restart_extra = 0 -retract_restart_extra_toolchange = 0 -retract_speed = 80 -serial_port = -serial_speed = 250000 -single_extruder_multi_material = 1 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0 -toolchange_gcode = -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 -variable_layer_height = 1 -wipe = 1 -z_offset = 0 [printer:Original Prusa i3 MK2 MultiMaterial] -bed_shape = 0x0,250x0,250x210,0x210 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -between_objects_gcode = -deretract_speed = 50,50,50,50 -end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors -extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259 -extruder_offset = 0x0,0x0,0x0,0x0 -gcode_flavor = marlin -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] -max_layer_height = 0.25,0.25,0.25,0.25 -min_layer_height = 0.07,0.07,0.07,0.07 +inherits = *mm-multi* nozzle_diameter = 0.4,0.4,0.4,0.4 -octoprint_apikey = -octoprint_host = -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN -printer_settings_id = -retract_before_travel = 3,3,3,3 -retract_before_wipe = 60%,60%,60%,60% -retract_layer_change = 0,0,0,0 -retract_length = 4,4,4,4 -retract_length_toolchange = 4,4,4,4 -retract_lift = 0.6,0.6,0.6,0.6 -retract_lift_above = 0,0,0,0 -retract_lift_below = 199,199,199,199 -retract_restart_extra = 0,0,0,0 -retract_restart_extra_toolchange = 0,0,0,0 -retract_speed = 80,80,80,80 -serial_port = -serial_speed = 250000 -single_extruder_multi_material = 1 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0 -toolchange_gcode = -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 -variable_layer_height = 0 -wipe = 1,1,1,1 -z_offset = 0 [printer:Original Prusa i3 MK2 MultiMaterial 0.6 nozzle] -bed_shape = 0x0,250x0,250x210,0x210 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -between_objects_gcode = -deretract_speed = 50,50,50,50 -end_gcode = {if not has_wipe_tower}\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n -extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259 -extruder_offset = 0x0,0x0,0x0,0x0 -gcode_flavor = marlin -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] -max_layer_height = 0.25,0.25,0.25,0.25 -min_layer_height = 0.07,0.07,0.07,0.07 +inherits = *mm-multi* nozzle_diameter = 0.6,0.6,0.6,0.6 -octoprint_apikey = -octoprint_host = -printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN -printer_settings_id = -retract_before_travel = 3,3,3,3 -retract_before_wipe = 60%,60%,60%,60% -retract_layer_change = 0,0,0,0 -retract_length = 4,4,4,4 -retract_length_toolchange = 4,4,4,4 -retract_lift = 0.6,0.6,0.6,0.6 -retract_lift_above = 0,0,0,0 -retract_lift_below = 199,199,199,199 -retract_restart_extra = 0,0,0,0 -retract_restart_extra_toolchange = 0,0,0,0 -retract_speed = 80,80,80,80 -serial_port = -serial_speed = 250000 -single_extruder_multi_material = 1 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0 -toolchange_gcode = -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 -variable_layer_height = 0 -wipe = 1,1,1,1 -z_offset = 0 [printer:Original Prusa i3 MK3] -bed_shape = 0x0,250x0,250x210,0x210 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -between_objects_gcode = -deretract_speed = 0 +inherits = *common* end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors -extruder_colour = #FFFF00 -extruder_offset = 0x0 -gcode_flavor = marlin -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] -max_layer_height = 0.25 -min_layer_height = 0.07 -nozzle_diameter = 0.4 -octoprint_apikey = -octoprint_host = printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n -retract_before_travel = 1 -retract_before_wipe = 0% -retract_layer_change = 1 -retract_length = 0.8 -retract_length_toolchange = 3 -retract_lift = 0.6 -retract_lift_above = 0 retract_lift_below = 209 -retract_restart_extra = 0 -retract_restart_extra_toolchange = 0 -retract_speed = 35 -serial_port = -serial_speed = 250000 -single_extruder_multi_material = 0 start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif} -toolchange_gcode = -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 -variable_layer_height = 1 -wipe = 1 -z_offset = 0 [presets] print = 0.15mm OPTIMAL MK3 diff --git a/xs/src/slic3r/GUI/PresetBundle.cpp b/xs/src/slic3r/GUI/PresetBundle.cpp index 3b4bf097f..bf79c6562 100644 --- a/xs/src/slic3r/GUI/PresetBundle.cpp +++ b/xs/src/slic3r/GUI/PresetBundle.cpp @@ -14,6 +14,7 @@ #include #include #include +#include #include #include @@ -474,6 +475,125 @@ void PresetBundle::load_config_file_config_bundle(const std::string &path, const this->update_compatible_with_printer(false); } +// Process the Config Bundle loaded as a Boost property tree. +// For each print, filament and printer preset (group defined by group_name), apply the inherited presets. +// The presets starting with '*' are considered non-terminal and they are +// removed through the flattening process by this function. +// This function will never fail, but it will produce error messages through boost::log. +static void flatten_configbundle_hierarchy(boost::property_tree::ptree &tree, const std::string &group_name) +{ + namespace pt = boost::property_tree; + + typedef std::pair ptree_child_type; + + // 1) For the group given by group_name, initialize the presets. + struct Prst { + Prst(const std::string &name, pt::ptree *node) : name(name), node(node) {} + // Name of this preset. If the name starts with '*', it is an intermediate preset, + // which will not make it into the result. + const std::string name; + // Link to the source boost property tree node, owned by tree. + pt::ptree *node; + // Link to the presets, from which this preset inherits. + std::vector inherits; + // Link to the presets, for which this preset is a direct parent. + std::vector parent_of; + // When running the Kahn's Topological sorting algorithm, this counter is decreased from inherits.size() to zero. + // A cycle is indicated, if the number does not drop to zero after the Kahn's algorithm finishes. + size_t num_incoming_edges_left = 0; + // Sorting by the name, to be used when inserted into std::set. + bool operator==(const Prst &rhs) const { return this->name == rhs.name; } + bool operator< (const Prst &rhs) const { return this->name < rhs.name; } + }; + // Find the presets, store them into a std::map, addressed by their names. + std::set presets; + std::string group_name_preset = group_name + ":"; + for (auto §ion : tree) + if (boost::starts_with(section.first, group_name_preset) && section.first.size() > group_name_preset.size()) + presets.emplace(section.first.substr(group_name_preset.size()), §ion.second); + // Fill in the "inherits" and "parent_of" members, report invalid inheritance fields. + for (const Prst &prst : presets) { + // Parse the list of comma separated values, possibly enclosed in quotes. + std::vector inherits_names; + if (Slic3r::unescape_strings_cstyle(prst.node->get("inherits", ""), inherits_names)) { + // Resolve the inheritance by name. + std::vector &inherits_nodes = const_cast(prst).inherits; + for (const std::string &node_name : inherits_names) { + auto it = presets.find(Prst(node_name, nullptr)); + if (it == presets.end()) + BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " inherits an unknown preset \"" << node_name << "\""; + else { + inherits_nodes.emplace_back(const_cast(&(*it))); + inherits_nodes.back()->parent_of.emplace_back(const_cast(&prst)); + } + } + } else { + BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " has an invalid \"inherits\" field"; + } + // Remove the "inherits" key, it has no meaning outside the config bundle. + const_cast(prst.node)->erase("inherits"); + } + + // 2) Create a linear ordering for the directed acyclic graph of preset inheritance. + // https://en.wikipedia.org/wiki/Topological_sorting + // Kahn's algorithm. + std::vector sorted; + { + // Initialize S with the set of all nodes with no incoming edge. + std::deque S; + for (const Prst &prst : presets) + if (prst.inherits.empty()) + S.emplace_back(const_cast(&prst)); + else + const_cast(&prst)->num_incoming_edges_left = prst.inherits.size(); + while (! S.empty()) { + Prst *n = S.front(); + S.pop_front(); + sorted.emplace_back(n); + for (Prst *m : n->parent_of) { + assert(m->num_incoming_edges_left > 0); + if (-- m->num_incoming_edges_left == 0) { + // We have visited all parents of m. + S.emplace_back(m); + } + } + } + if (sorted.size() < presets.size()) { + for (const Prst &prst : presets) + if (prst.num_incoming_edges_left) + BOOST_LOG_TRIVIAL(error) << "flatten_configbundle_hierarchy: The preset " << prst.name << " has cyclic dependencies"; + } + } + + // Apply the dependencies in their topological ordering. + for (Prst *prst : sorted) { + // Merge the preset nodes in their order of application. + // Iterate in a reverse order, so the last change will be placed first in merged. + for (auto it_inherits = prst->inherits.rbegin(); it_inherits != prst->inherits.rend(); ++ it_inherits) + for (auto it = (*it_inherits)->node->begin(); it != (*it_inherits)->node->end(); ++ it) + if (prst->node->find(it->first) == prst->node->not_found()) + prst->node->add_child(it->first, it->second); + } + + // Remove the "internal" presets from the ptree. These presets are marked with '*'. + group_name_preset += '*'; + for (auto it_section = tree.begin(); it_section != tree.end(); ) { + if (boost::starts_with(it_section->first, group_name_preset) && it_section->first.size() > group_name_preset.size()) + // Remove the "internal" preset from the ptree. + it_section = tree.erase(it_section); + else + // Keep the preset. + ++ it_section; + } +} + +static void flatten_configbundle_hierarchy(boost::property_tree::ptree &tree) +{ + flatten_configbundle_hierarchy(tree, "print"); + flatten_configbundle_hierarchy(tree, "filament"); + flatten_configbundle_hierarchy(tree, "printer"); +} + // Load a config bundle file, into presets and store the loaded presets into separate files // of the local configuration directory. size_t PresetBundle::load_configbundle(const std::string &path, unsigned int flags) @@ -486,6 +606,8 @@ size_t PresetBundle::load_configbundle(const std::string &path, unsigned int fla pt::ptree tree; boost::nowide::ifstream ifs(path); pt::read_ini(ifs, tree); + // Flatten the config bundle by applying the inheritance rules. Internal profiles (with names starting with '*') are removed. + flatten_configbundle_hierarchy(tree); // 2) Parse the property_tree, extract the active preset names and the profiles, save them into local config files. std::vector loaded_prints;