diff --git a/resources/localization/PrusaSlicer.pot b/resources/localization/PrusaSlicer.pot
index aef39c253..a111c8fa0 100644
--- a/resources/localization/PrusaSlicer.pot
+++ b/resources/localization/PrusaSlicer.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2020-04-16 11:29+0200\n"
+"POT-Creation-Date: 2020-10-19 13:45+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -18,109 +18,55 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=INTEGER; plural=EXPRESSION;\n"
 
-#: src/slic3r/GUI/AboutDialog.cpp:42 src/slic3r/GUI/AboutDialog.cpp:295
+#: src/slic3r/GUI/AboutDialog.cpp:43 src/slic3r/GUI/AboutDialog.cpp:48
+#: src/slic3r/GUI/AboutDialog.cpp:317
 msgid "Portions copyright"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:130 src/slic3r/GUI/AboutDialog.cpp:259
+#: src/slic3r/GUI/AboutDialog.cpp:139 src/slic3r/GUI/AboutDialog.cpp:281
 msgid "Copyright"
 msgstr ""
 
 #. TRN "Slic3r _is licensed under the_ License"
-#: src/slic3r/GUI/AboutDialog.cpp:132
+#: src/slic3r/GUI/AboutDialog.cpp:141
 msgid ""
 "License agreements of all following programs (libraries) are part of "
 "application license agreement"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:202
+#: src/slic3r/GUI/AboutDialog.cpp:212 src/slic3r/GUI/AboutDialog.cpp:215
 #, possible-c-format
 msgid "About %s"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:234 src/slic3r/GUI/MainFrame.cpp:70
+#: src/slic3r/GUI/AboutDialog.cpp:256 src/slic3r/GUI/GUI_App.cpp:239
+#: src/slic3r/GUI/MainFrame.cpp:164
 msgid "Version"
 msgstr ""
 
 #. TRN "Slic3r _is licensed under the_ License"
-#: src/slic3r/GUI/AboutDialog.cpp:261
+#: src/slic3r/GUI/AboutDialog.cpp:283 src/slic3r/GUI/GUI_App.cpp:244
 msgid "is licensed under the"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:262
+#: src/slic3r/GUI/AboutDialog.cpp:284 src/slic3r/GUI/GUI_App.cpp:244
 msgid "GNU Affero General Public License, version 3"
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:263
+#: src/slic3r/GUI/AboutDialog.cpp:285
 msgid ""
 "PrusaSlicer is based on Slic3r by Alessandro Ranellucci and the RepRap "
 "community."
 msgstr ""
 
-#: src/slic3r/GUI/AboutDialog.cpp:264
+#: src/slic3r/GUI/AboutDialog.cpp:286
 msgid ""
 "Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
 "Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
 "numerous others."
 msgstr ""
 
-#: src/slic3r/GUI/AppConfig.cpp:110
-msgid ""
-"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
-"manually delete the file to recover from the error. Your user profiles will "
-"not be affected."
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:101
-msgid ""
-"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
-"card is write locked?"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:104
-msgid ""
-"Copying of the temporary G-code to the output G-code failed. There might be "
-"problem with target device, please try exporting again or using different "
-"device. The corrupted output G-code is at %1%.tmp."
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:107
-msgid ""
-"Renaming of the G-code after copying to the selected destination folder has "
-"failed. Current path is %1%.tmp. Please try exporting again."
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:110
-msgid ""
-"Copying of the temporary G-code has finished but the original code at %1% "
-"couldn't be opened during copy check. The output G-code is at %2%.tmp."
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:113
-msgid ""
-"Copying of the temporary G-code has finished but the exported code couldn't "
-"be opened during copy check. The output G-code is at %1%.tmp."
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:120
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:468
-msgid "Running post-processing scripts"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:122
-msgid "G-code file exported to %1%"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:126
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:172
-msgid "Slicing complete"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:168
-msgid "Masked SLA file exported to %1%"
-msgstr ""
-
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:210
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:62
 #, possible-c-format
 msgid ""
 "%s has encountered an error. It was likely caused by running out of memory. "
@@ -128,161 +74,219 @@ msgid ""
 "and we would be glad if you reported it."
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:470
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:144
+msgid ""
+"Copying of the temporary G-code to the output G-code failed. Maybe the SD "
+"card is write locked?"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:147
+msgid ""
+"Copying of the temporary G-code to the output G-code failed. There might be "
+"problem with target device, please try exporting again or using different "
+"device. The corrupted output G-code is at %1%.tmp."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:150
+msgid ""
+"Renaming of the G-code after copying to the selected destination folder has "
+"failed. Current path is %1%.tmp. Please try exporting again."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:153
+msgid ""
+"Copying of the temporary G-code has finished but the original code at %1% "
+"couldn't be opened during copy check. The output G-code is at %2%.tmp."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:156
+msgid ""
+"Copying of the temporary G-code has finished but the exported code couldn't "
+"be opened during copy check. The output G-code is at %1%.tmp."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:163
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:520
+msgid "Running post-processing scripts"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:165
+msgid "G-code file exported to %1%"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:170
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:219
+msgid "Slicing complete"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:214
+msgid "Masked SLA file exported to %1%"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:522
 msgid "Copying of the temporary G-code to the output G-code failed"
 msgstr ""
 
-#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:493
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:545
 msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:66 src/slic3r/GUI/GUI_ObjectList.cpp:2073
-msgid "Shape"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:73
-msgid "Rectangular"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:79
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:162
-#: src/slic3r/GUI/Tab.cpp:2319
+#: src/slic3r/GUI/BedShapeDialog.cpp:93
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:166
+#: src/slic3r/GUI/Tab.cpp:2493
 msgid "Size"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:80
-msgid "Size in X and Y of the rectangular plate."
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:88
+#: src/slic3r/GUI/BedShapeDialog.cpp:94
 msgid "Origin"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:89
+#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:745
+msgid "Diameter"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:110
+msgid "Size in X and Y of the rectangular plate."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:121
 msgid ""
 "Distance of the 0,0 G-code coordinate from the front left corner of the "
 "rectangle."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:93
-msgid "Circular"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:96 src/slic3r/GUI/ConfigWizard.cpp:233
-#: src/slic3r/GUI/ConfigWizard.cpp:985 src/slic3r/GUI/ConfigWizard.cpp:999
+#: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:236
+#: src/slic3r/GUI/ConfigWizard.cpp:1336 src/slic3r/GUI/ConfigWizard.cpp:1350
 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:87
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:142
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:333
+#: src/slic3r/GUI/GCodeViewer.cpp:2183 src/slic3r/GUI/GCodeViewer.cpp:2189
+#: src/slic3r/GUI/GCodeViewer.cpp:2197 src/slic3r/GUI/GUI_ObjectLayers.cpp:145
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:96
 #: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:75
-#: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:91
-#: src/libslic3r/PrintConfig.cpp:122 src/libslic3r/PrintConfig.cpp:188
-#: src/libslic3r/PrintConfig.cpp:246 src/libslic3r/PrintConfig.cpp:321
-#: src/libslic3r/PrintConfig.cpp:329 src/libslic3r/PrintConfig.cpp:379
-#: src/libslic3r/PrintConfig.cpp:505 src/libslic3r/PrintConfig.cpp:516
-#: src/libslic3r/PrintConfig.cpp:534 src/libslic3r/PrintConfig.cpp:712
-#: src/libslic3r/PrintConfig.cpp:1231 src/libslic3r/PrintConfig.cpp:1292
-#: src/libslic3r/PrintConfig.cpp:1310 src/libslic3r/PrintConfig.cpp:1328
-#: src/libslic3r/PrintConfig.cpp:1384 src/libslic3r/PrintConfig.cpp:1394
-#: src/libslic3r/PrintConfig.cpp:1516 src/libslic3r/PrintConfig.cpp:1524
-#: src/libslic3r/PrintConfig.cpp:1565 src/libslic3r/PrintConfig.cpp:1573
-#: src/libslic3r/PrintConfig.cpp:1583 src/libslic3r/PrintConfig.cpp:1591
-#: src/libslic3r/PrintConfig.cpp:1599 src/libslic3r/PrintConfig.cpp:1682
-#: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1992
-#: src/libslic3r/PrintConfig.cpp:2026 src/libslic3r/PrintConfig.cpp:2154
-#: src/libslic3r/PrintConfig.cpp:2233 src/libslic3r/PrintConfig.cpp:2240
-#: src/libslic3r/PrintConfig.cpp:2247 src/libslic3r/PrintConfig.cpp:2277
-#: src/libslic3r/PrintConfig.cpp:2287 src/libslic3r/PrintConfig.cpp:2297
-#: src/libslic3r/PrintConfig.cpp:2457 src/libslic3r/PrintConfig.cpp:2491
-#: src/libslic3r/PrintConfig.cpp:2630 src/libslic3r/PrintConfig.cpp:2639
-#: src/libslic3r/PrintConfig.cpp:2648 src/libslic3r/PrintConfig.cpp:2658
-#: src/libslic3r/PrintConfig.cpp:2712 src/libslic3r/PrintConfig.cpp:2722
-#: src/libslic3r/PrintConfig.cpp:2734 src/libslic3r/PrintConfig.cpp:2754
-#: src/libslic3r/PrintConfig.cpp:2764 src/libslic3r/PrintConfig.cpp:2774
-#: src/libslic3r/PrintConfig.cpp:2792 src/libslic3r/PrintConfig.cpp:2807
-#: src/libslic3r/PrintConfig.cpp:2821 src/libslic3r/PrintConfig.cpp:2832
-#: src/libslic3r/PrintConfig.cpp:2845 src/libslic3r/PrintConfig.cpp:2890
-#: src/libslic3r/PrintConfig.cpp:2900 src/libslic3r/PrintConfig.cpp:2909
-#: src/libslic3r/PrintConfig.cpp:2919 src/libslic3r/PrintConfig.cpp:2935
-#: src/libslic3r/PrintConfig.cpp:2959
+#: src/libslic3r/PrintConfig.cpp:82 src/libslic3r/PrintConfig.cpp:93
+#: src/libslic3r/PrintConfig.cpp:124 src/libslic3r/PrintConfig.cpp:222
+#: src/libslic3r/PrintConfig.cpp:280 src/libslic3r/PrintConfig.cpp:355
+#: src/libslic3r/PrintConfig.cpp:363 src/libslic3r/PrintConfig.cpp:413
+#: src/libslic3r/PrintConfig.cpp:541 src/libslic3r/PrintConfig.cpp:552
+#: src/libslic3r/PrintConfig.cpp:570 src/libslic3r/PrintConfig.cpp:748
+#: src/libslic3r/PrintConfig.cpp:1158 src/libslic3r/PrintConfig.cpp:1339
+#: src/libslic3r/PrintConfig.cpp:1400 src/libslic3r/PrintConfig.cpp:1418
+#: src/libslic3r/PrintConfig.cpp:1436 src/libslic3r/PrintConfig.cpp:1492
+#: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1624
+#: src/libslic3r/PrintConfig.cpp:1632 src/libslic3r/PrintConfig.cpp:1673
+#: src/libslic3r/PrintConfig.cpp:1681 src/libslic3r/PrintConfig.cpp:1691
+#: src/libslic3r/PrintConfig.cpp:1699 src/libslic3r/PrintConfig.cpp:1707
+#: src/libslic3r/PrintConfig.cpp:1790 src/libslic3r/PrintConfig.cpp:2056
+#: src/libslic3r/PrintConfig.cpp:2127 src/libslic3r/PrintConfig.cpp:2161
+#: src/libslic3r/PrintConfig.cpp:2290 src/libslic3r/PrintConfig.cpp:2369
+#: src/libslic3r/PrintConfig.cpp:2376 src/libslic3r/PrintConfig.cpp:2383
+#: src/libslic3r/PrintConfig.cpp:2413 src/libslic3r/PrintConfig.cpp:2423
+#: src/libslic3r/PrintConfig.cpp:2433 src/libslic3r/PrintConfig.cpp:2593
+#: src/libslic3r/PrintConfig.cpp:2627 src/libslic3r/PrintConfig.cpp:2766
+#: src/libslic3r/PrintConfig.cpp:2775 src/libslic3r/PrintConfig.cpp:2784
+#: src/libslic3r/PrintConfig.cpp:2794 src/libslic3r/PrintConfig.cpp:2859
+#: src/libslic3r/PrintConfig.cpp:2869 src/libslic3r/PrintConfig.cpp:2881
+#: src/libslic3r/PrintConfig.cpp:2901 src/libslic3r/PrintConfig.cpp:2911
+#: src/libslic3r/PrintConfig.cpp:2921 src/libslic3r/PrintConfig.cpp:2939
+#: src/libslic3r/PrintConfig.cpp:2954 src/libslic3r/PrintConfig.cpp:2968
+#: src/libslic3r/PrintConfig.cpp:2979 src/libslic3r/PrintConfig.cpp:2992
+#: src/libslic3r/PrintConfig.cpp:3037 src/libslic3r/PrintConfig.cpp:3047
+#: src/libslic3r/PrintConfig.cpp:3056 src/libslic3r/PrintConfig.cpp:3066
+#: src/libslic3r/PrintConfig.cpp:3082 src/libslic3r/PrintConfig.cpp:3106
 msgid "mm"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:97 src/libslic3r/PrintConfig.cpp:709
-msgid "Diameter"
-msgstr ""
-
-#: src/slic3r/GUI/BedShapeDialog.cpp:98
+#: src/slic3r/GUI/BedShapeDialog.cpp:131
 msgid ""
 "Diameter of the print bed. It is assumed that origin (0,0) is located in the "
 "center."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:102 src/slic3r/GUI/GUI_Preview.cpp:308
-#: src/libslic3r/ExtrusionEntity.cpp:322
+#: src/slic3r/GUI/BedShapeDialog.cpp:141
+msgid "Rectangular"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:142
+msgid "Circular"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:314
+#: src/libslic3r/ExtrusionEntity.cpp:327 src/libslic3r/ExtrusionEntity.cpp:362
 msgid "Custom"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:106
+#: src/slic3r/GUI/BedShapeDialog.cpp:145
+msgid "Invalid"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2215
+msgid "Shape"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:243
 msgid "Load shape from STL..."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:159
+#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:1969
 msgid "Settings"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:176
+#: src/slic3r/GUI/BedShapeDialog.cpp:315
 msgid "Texture"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:186 src/slic3r/GUI/BedShapeDialog.cpp:265
+#: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405
 msgid "Load..."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:194 src/slic3r/GUI/BedShapeDialog.cpp:273
-#: src/slic3r/GUI/Tab.cpp:3155
+#: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413
+#: src/slic3r/GUI/Tab.cpp:3423
 msgid "Remove"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:227 src/slic3r/GUI/BedShapeDialog.cpp:306
+#: src/slic3r/GUI/BedShapeDialog.cpp:366 src/slic3r/GUI/BedShapeDialog.cpp:446
 msgid "Not found:"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:255
+#: src/slic3r/GUI/BedShapeDialog.cpp:395
 msgid "Model"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:491
+#: src/slic3r/GUI/BedShapeDialog.cpp:563
 msgid "Choose an STL file to import bed shape from:"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:498 src/slic3r/GUI/BedShapeDialog.cpp:547
-#: src/slic3r/GUI/BedShapeDialog.cpp:570
+#: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619
+#: src/slic3r/GUI/BedShapeDialog.cpp:642
 msgid "Invalid file format."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:509
+#: src/slic3r/GUI/BedShapeDialog.cpp:581
 msgid "Error! Invalid model"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:517
+#: src/slic3r/GUI/BedShapeDialog.cpp:589
 msgid "The selected file contains no geometry."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:521
+#: src/slic3r/GUI/BedShapeDialog.cpp:593
 msgid ""
 "The selected file contains several disjoint areas. This is not supported."
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:536
+#: src/slic3r/GUI/BedShapeDialog.cpp:608
 msgid "Choose a file to import bed texture from (PNG/SVG):"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.cpp:559
+#: src/slic3r/GUI/BedShapeDialog.cpp:631
 msgid "Choose an STL file to import bed model from:"
 msgstr ""
 
-#: src/slic3r/GUI/BedShapeDialog.hpp:59 src/slic3r/GUI/ConfigWizard.cpp:944
+#: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1295
 msgid "Bed Shape"
 msgstr ""
 
@@ -328,31 +332,31 @@ msgid ""
 "preset"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:48
+#: src/slic3r/GUI/ConfigManipulation.cpp:47
 msgid ""
 "Zero layer height is not valid.\n"
 "\n"
 "The layer height will be reset to 0.01."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:49
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27 src/slic3r/GUI/Tab.cpp:1116
+#: src/slic3r/GUI/ConfigManipulation.cpp:48
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 src/slic3r/GUI/Tab.cpp:1371
 #: src/libslic3r/PrintConfig.cpp:71
 msgid "Layer height"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:60
+#: src/slic3r/GUI/ConfigManipulation.cpp:59
 msgid ""
 "Zero first layer height is not valid.\n"
 "\n"
 "The first layer height will be reset to 0.01."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:889
+#: src/slic3r/GUI/ConfigManipulation.cpp:60 src/libslic3r/PrintConfig.cpp:931
 msgid "First layer height"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:81
+#: src/slic3r/GUI/ConfigManipulation.cpp:80
 #, possible-c-format
 msgid ""
 "The Spiral Vase mode requires:\n"
@@ -364,15 +368,15 @@ msgid ""
 "- Detect thin walls disabled"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:89
+#: src/slic3r/GUI/ConfigManipulation.cpp:88
 msgid "Shall I adjust those settings in order to enable Spiral Vase?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:90
+#: src/slic3r/GUI/ConfigManipulation.cpp:89
 msgid "Spiral Vase"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:115
+#: src/slic3r/GUI/ConfigManipulation.cpp:114
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only\n"
 "if they are printed with the current extruder without triggering a tool "
@@ -381,74 +385,74 @@ msgid ""
 "to be set to 0)."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:119
+#: src/slic3r/GUI/ConfigManipulation.cpp:118
 msgid "Shall I adjust those settings in order to enable the Wipe Tower?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:120
-#: src/slic3r/GUI/ConfigManipulation.cpp:140
+#: src/slic3r/GUI/ConfigManipulation.cpp:119
+#: src/slic3r/GUI/ConfigManipulation.cpp:139
 msgid "Wipe Tower"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:136
+#: src/slic3r/GUI/ConfigManipulation.cpp:135
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers\n"
 "need to be synchronized with the object layers."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:139
+#: src/slic3r/GUI/ConfigManipulation.cpp:138
 msgid "Shall I synchronize support layers in order to enable the Wipe Tower?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:159
+#: src/slic3r/GUI/ConfigManipulation.cpp:158
 msgid ""
 "Supports work better, if the following feature is enabled:\n"
 "- Detect bridging perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:162
+#: src/slic3r/GUI/ConfigManipulation.cpp:161
 msgid "Shall I adjust those settings for supports?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:163
+#: src/slic3r/GUI/ConfigManipulation.cpp:162
 msgid "Support Generator"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:208
+#: src/slic3r/GUI/ConfigManipulation.cpp:207
 msgid "The %1% infill pattern is not supposed to work at 100%% density."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:210
+#: src/slic3r/GUI/ConfigManipulation.cpp:209
 msgid "Shall I switch to rectilinear fill pattern?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:211
-#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:96
-#: src/slic3r/GUI/GUI_ObjectList.cpp:618 src/slic3r/GUI/Plater.cpp:534
-#: src/slic3r/GUI/Tab.cpp:1158 src/slic3r/GUI/Tab.cpp:1159
-#: src/libslic3r/PrintConfig.cpp:203 src/libslic3r/PrintConfig.cpp:416
-#: src/libslic3r/PrintConfig.cpp:436 src/libslic3r/PrintConfig.cpp:776
-#: src/libslic3r/PrintConfig.cpp:790 src/libslic3r/PrintConfig.cpp:827
-#: src/libslic3r/PrintConfig.cpp:981 src/libslic3r/PrintConfig.cpp:991
-#: src/libslic3r/PrintConfig.cpp:1009 src/libslic3r/PrintConfig.cpp:1028
-#: src/libslic3r/PrintConfig.cpp:1047 src/libslic3r/PrintConfig.cpp:1735
-#: src/libslic3r/PrintConfig.cpp:1752
+#: src/slic3r/GUI/ConfigManipulation.cpp:210
+#: src/slic3r/GUI/GUI_ObjectList.cpp:35 src/slic3r/GUI/GUI_ObjectList.cpp:93
+#: src/slic3r/GUI/GUI_ObjectList.cpp:652 src/slic3r/GUI/Plater.cpp:393
+#: src/slic3r/GUI/Tab.cpp:1413 src/slic3r/GUI/Tab.cpp:1414
+#: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:450
+#: src/libslic3r/PrintConfig.cpp:472 src/libslic3r/PrintConfig.cpp:812
+#: src/libslic3r/PrintConfig.cpp:826 src/libslic3r/PrintConfig.cpp:863
+#: src/libslic3r/PrintConfig.cpp:1025 src/libslic3r/PrintConfig.cpp:1035
+#: src/libslic3r/PrintConfig.cpp:1053 src/libslic3r/PrintConfig.cpp:1072
+#: src/libslic3r/PrintConfig.cpp:1091 src/libslic3r/PrintConfig.cpp:1843
+#: src/libslic3r/PrintConfig.cpp:1860
 msgid "Infill"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:318
+#: src/slic3r/GUI/ConfigManipulation.cpp:322
 msgid "Head penetration should not be greater than the head width."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:320
+#: src/slic3r/GUI/ConfigManipulation.cpp:324
 msgid "Invalid Head penetration"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:331
+#: src/slic3r/GUI/ConfigManipulation.cpp:335
 msgid "Pinhead diameter should be smaller than the pillar diameter."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigManipulation.cpp:333
+#: src/slic3r/GUI/ConfigManipulation.cpp:337
 msgid "Invalid pinhead diameter"
 msgstr ""
 
@@ -464,11 +468,12 @@ msgstr ""
 msgid "Before roll back"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24 src/libslic3r/PrintConfig.cpp:132
 msgid "User"
 msgstr ""
 
 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
+#: src/slic3r/GUI/GUI_Preview.cpp:299 src/libslic3r/ExtrusionEntity.cpp:310
 msgid "Unknown"
 msgstr ""
 
@@ -480,7 +485,7 @@ msgstr ""
 msgid "PrusaSlicer version"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/slic3r/GUI/Preset.cpp:1563
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 src/libslic3r/Preset.cpp:1300
 msgid "print"
 msgstr ""
 
@@ -488,11 +493,11 @@ msgstr ""
 msgid "filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 src/slic3r/GUI/Preset.cpp:1567
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53 src/libslic3r/Preset.cpp:1304
 msgid "printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 src/slic3r/GUI/Tab.cpp:1034
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:57 src/slic3r/GUI/Tab.cpp:1289
 msgid "vendor"
 msgstr ""
 
@@ -529,104 +534,125 @@ msgstr ""
 msgid "Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:233
+#: src/slic3r/GUI/ConfigWizard.cpp:236
 msgid "nozzle"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:237
+#: src/slic3r/GUI/ConfigWizard.cpp:240
 msgid "Alternate nozzles:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:304
+#: src/slic3r/GUI/ConfigWizard.cpp:307
 msgid "All standard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:304
+#: src/slic3r/GUI/ConfigWizard.cpp:307
 msgid "Standard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:305 src/slic3r/GUI/ConfigWizard.cpp:588
-#: src/slic3r/GUI/Tab.cpp:3214
+#: src/slic3r/GUI/ConfigWizard.cpp:308 src/slic3r/GUI/ConfigWizard.cpp:598
+#: src/slic3r/GUI/Tab.cpp:3507 src/slic3r/GUI/UnsavedChangesDialog.cpp:921
 msgid "All"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:306 src/slic3r/GUI/ConfigWizard.cpp:589
-#: src/slic3r/GUI/Plater.cpp:506 src/slic3r/GUI/Plater.cpp:646
-#: src/libslic3r/ExtrusionEntity.cpp:309
+#: src/slic3r/GUI/ConfigWizard.cpp:309 src/slic3r/GUI/ConfigWizard.cpp:599
+#: src/slic3r/GUI/Plater.cpp:365 src/slic3r/GUI/Plater.cpp:505
+#: src/libslic3r/ExtrusionEntity.cpp:312
 msgid "None"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:442
+#: src/slic3r/GUI/ConfigWizard.cpp:445
 #, possible-c-format
 msgid "Welcome to the %s Configuration Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:444
+#: src/slic3r/GUI/ConfigWizard.cpp:447
 #, possible-c-format
 msgid "Welcome to the %s Configuration Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:446
+#: src/slic3r/GUI/ConfigWizard.cpp:449
 msgid "Welcome"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:448
+#: src/slic3r/GUI/ConfigWizard.cpp:451
 #, possible-c-format
 msgid ""
 "Hello, welcome to %s! This %s helps you with the initial configuration; just "
 "a few settings and you will be ready to print."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:453
+#: src/slic3r/GUI/ConfigWizard.cpp:456
 msgid "Remove user profiles (a snapshot will be taken beforehand)"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:496
+#: src/slic3r/GUI/ConfigWizard.cpp:499
 #, possible-c-format
 msgid "%s Family"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:580
+#: src/slic3r/GUI/ConfigWizard.cpp:587
+msgid "Printer:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:589
 msgid "Vendor:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:581
+#: src/slic3r/GUI/ConfigWizard.cpp:590
 msgid "Profile:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:618 src/slic3r/GUI/ConfigWizard.cpp:646
+#: src/slic3r/GUI/ConfigWizard.cpp:662 src/slic3r/GUI/ConfigWizard.cpp:812
+#: src/slic3r/GUI/ConfigWizard.cpp:873 src/slic3r/GUI/ConfigWizard.cpp:1007
 msgid "(All)"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:747
+#: src/slic3r/GUI/ConfigWizard.cpp:691
+msgid ""
+"Filaments marked with <b>*</b> are <b>not</b> compatible with some installed "
+"printers."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:694
+msgid "All installed printers are compatible with the selected filament."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:714
+msgid ""
+"Only the following installed printers are compatible with the selected "
+"filament:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1091
 msgid "Custom Printer Setup"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:747
+#: src/slic3r/GUI/ConfigWizard.cpp:1091
 msgid "Custom Printer"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:749
+#: src/slic3r/GUI/ConfigWizard.cpp:1093
 msgid "Define a custom printer profile"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:751
+#: src/slic3r/GUI/ConfigWizard.cpp:1095
 msgid "Custom profile name:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:776
+#: src/slic3r/GUI/ConfigWizard.cpp:1120
 msgid "Automatic updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:776
+#: src/slic3r/GUI/ConfigWizard.cpp:1120
 msgid "Updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:784 src/slic3r/GUI/Preferences.cpp:64
+#: src/slic3r/GUI/ConfigWizard.cpp:1128 src/slic3r/GUI/Preferences.cpp:81
 msgid "Check for application updates"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:788
+#: src/slic3r/GUI/ConfigWizard.cpp:1132
 #, possible-c-format
 msgid ""
 "If enabled, %s checks for new application versions online. When a new "
@@ -635,11 +661,11 @@ msgid ""
 "notification mechanisms, no automatic installation is done."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:794 src/slic3r/GUI/Preferences.cpp:80
+#: src/slic3r/GUI/ConfigWizard.cpp:1138 src/slic3r/GUI/Preferences.cpp:97
 msgid "Update built-in Presets automatically"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:798
+#: src/slic3r/GUI/ConfigWizard.cpp:1142
 #, possible-c-format
 msgid ""
 "If enabled, %s downloads updates of built-in system presets in the "
@@ -648,30 +674,30 @@ msgid ""
 "startup."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:801
+#: src/slic3r/GUI/ConfigWizard.cpp:1145
 msgid ""
 "Updates are never applied without user's consent and never overwrite user's "
 "customized settings."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:806
+#: src/slic3r/GUI/ConfigWizard.cpp:1150
 msgid ""
 "Additionally a backup snapshot of the whole configuration is created before "
 "an update is applied."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:813 src/slic3r/GUI/GUI_ObjectList.cpp:1678
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4040 src/slic3r/GUI/Plater.cpp:3225
-#: src/slic3r/GUI/Plater.cpp:3938 src/slic3r/GUI/Plater.cpp:3967
+#: src/slic3r/GUI/ConfigWizard.cpp:1157 src/slic3r/GUI/GUI_ObjectList.cpp:1793
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3028
+#: src/slic3r/GUI/Plater.cpp:3852 src/slic3r/GUI/Plater.cpp:3881
 msgid "Reload from disk"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:816
+#: src/slic3r/GUI/ConfigWizard.cpp:1160
 msgid ""
 "Export full pathnames of models and parts sources into 3mf and amf files"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:820
+#: src/slic3r/GUI/ConfigWizard.cpp:1164
 msgid ""
 "If enabled, allows the Reload from disk command to automatically find and "
 "load the files when invoked.\n"
@@ -679,11 +705,11 @@ msgid ""
 "using an open file dialog."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:828
+#: src/slic3r/GUI/ConfigWizard.cpp:1172
 msgid "View mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:830
+#: src/slic3r/GUI/ConfigWizard.cpp:1174
 msgid ""
 "PrusaSlicer's user interfaces comes in three variants:\n"
 "Simple, Advanced, and Expert.\n"
@@ -692,272 +718,285 @@ msgid ""
 "fine-tuning, they are suitable for advanced and expert users, respectively."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:835
+#: src/slic3r/GUI/ConfigWizard.cpp:1179
 msgid "Simple mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:836
+#: src/slic3r/GUI/ConfigWizard.cpp:1180
 msgid "Advanced mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:837
+#: src/slic3r/GUI/ConfigWizard.cpp:1181
 msgid "Expert mode"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:871
+#: src/slic3r/GUI/ConfigWizard.cpp:1187
+msgid "The size of the object can be specified in inches"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1188
+msgid "Use inches"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1222
 msgid "Other Vendors"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:875
+#: src/slic3r/GUI/ConfigWizard.cpp:1226
 #, possible-c-format
 msgid "Pick another vendor supported by %s"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:906
+#: src/slic3r/GUI/ConfigWizard.cpp:1257
 msgid "Firmware Type"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:906 src/slic3r/GUI/Tab.cpp:1980
+#: src/slic3r/GUI/ConfigWizard.cpp:1257 src/slic3r/GUI/Tab.cpp:2132
 msgid "Firmware"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:910
+#: src/slic3r/GUI/ConfigWizard.cpp:1261
 msgid "Choose the type of firmware used by your printer."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:944
+#: src/slic3r/GUI/ConfigWizard.cpp:1295
 msgid "Bed Shape and Size"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:947
+#: src/slic3r/GUI/ConfigWizard.cpp:1298
 msgid "Set the shape of your printer's bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:967
+#: src/slic3r/GUI/ConfigWizard.cpp:1318
 msgid "Filament and Nozzle Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:967
+#: src/slic3r/GUI/ConfigWizard.cpp:1318
 msgid "Print Diameters"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:981
+#: src/slic3r/GUI/ConfigWizard.cpp:1332
 msgid "Enter the diameter of your printer's hot end nozzle."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:984
+#: src/slic3r/GUI/ConfigWizard.cpp:1335
 msgid "Nozzle Diameter:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:994
+#: src/slic3r/GUI/ConfigWizard.cpp:1345
 msgid "Enter the diameter of your filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:995
+#: src/slic3r/GUI/ConfigWizard.cpp:1346
 msgid ""
 "Good precision is required, so use a caliper and do multiple measurements "
 "along the filament, then compute the average."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:998
+#: src/slic3r/GUI/ConfigWizard.cpp:1349
 msgid "Filament Diameter:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1032
+#: src/slic3r/GUI/ConfigWizard.cpp:1383
 msgid "Extruder and Bed Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1032
+#: src/slic3r/GUI/ConfigWizard.cpp:1383
 msgid "Temperatures"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1048
+#: src/slic3r/GUI/ConfigWizard.cpp:1399
 msgid "Enter the temperature needed for extruding your filament."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1049
+#: src/slic3r/GUI/ConfigWizard.cpp:1400
 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1052
+#: src/slic3r/GUI/ConfigWizard.cpp:1403
 msgid "Extrusion Temperature:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1053 src/slic3r/GUI/ConfigWizard.cpp:1067
+#: src/slic3r/GUI/ConfigWizard.cpp:1404 src/slic3r/GUI/ConfigWizard.cpp:1418
+#: src/libslic3r/PrintConfig.cpp:180 src/libslic3r/PrintConfig.cpp:912
+#: src/libslic3r/PrintConfig.cpp:956 src/libslic3r/PrintConfig.cpp:2209
 msgid "°C"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1062
+#: src/slic3r/GUI/ConfigWizard.cpp:1413
 msgid ""
 "Enter the bed temperature needed for getting your filament to stick to your "
 "heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1063
+#: src/slic3r/GUI/ConfigWizard.cpp:1414
 msgid ""
 "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
 "no heated bed."
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1066
+#: src/slic3r/GUI/ConfigWizard.cpp:1417
 msgid "Bed Temperature:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1515 src/slic3r/GUI/ConfigWizard.cpp:2097
+#: src/slic3r/GUI/ConfigWizard.cpp:1872 src/slic3r/GUI/ConfigWizard.cpp:2524
 msgid "Filaments"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1515 src/slic3r/GUI/ConfigWizard.cpp:2099
+#: src/slic3r/GUI/ConfigWizard.cpp:1872 src/slic3r/GUI/ConfigWizard.cpp:2526
 msgid "SLA Materials"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1569
+#: src/slic3r/GUI/ConfigWizard.cpp:1926
 msgid "FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1574
+#: src/slic3r/GUI/ConfigWizard.cpp:1931
 msgid "SLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1810 src/slic3r/GUI/DoubleSlider.cpp:1907
-#: src/slic3r/GUI/DoubleSlider.cpp:1928 src/slic3r/GUI/GUI.cpp:246
+#: src/slic3r/GUI/ConfigWizard.cpp:2237 src/slic3r/GUI/DoubleSlider.cpp:2124
+#: src/slic3r/GUI/DoubleSlider.cpp:2144 src/slic3r/GUI/GUI.cpp:244
 msgid "Notice"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1830
+#: src/slic3r/GUI/ConfigWizard.cpp:2257
 msgid "The following FFF printer models have no filament selected:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1834
+#: src/slic3r/GUI/ConfigWizard.cpp:2261
 msgid "Do you want to select default filaments for these FFF printer models?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1848
+#: src/slic3r/GUI/ConfigWizard.cpp:2275
 msgid "The following SLA printer models have no materials selected:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:1852
+#: src/slic3r/GUI/ConfigWizard.cpp:2279
 msgid "Do you want to select default SLA materials for these printer models?"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2060
+#: src/slic3r/GUI/ConfigWizard.cpp:2487
 msgid "Select all standard printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2063
+#: src/slic3r/GUI/ConfigWizard.cpp:2490
 msgid "< &Back"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2064
+#: src/slic3r/GUI/ConfigWizard.cpp:2491
 msgid "&Next >"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2065
+#: src/slic3r/GUI/ConfigWizard.cpp:2492
 msgid "&Finish"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2066 src/slic3r/GUI/FirmwareDialog.cpp:151
+#: src/slic3r/GUI/ConfigWizard.cpp:2493 src/slic3r/GUI/FirmwareDialog.cpp:151
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:245
 #: src/slic3r/GUI/ProgressStatusBar.cpp:26
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:644
 msgid "Cancel"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2079
+#: src/slic3r/GUI/ConfigWizard.cpp:2506
 msgid "Prusa FFF Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2082
+#: src/slic3r/GUI/ConfigWizard.cpp:2509
 msgid "Prusa MSLA Technology Printers"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2097
+#: src/slic3r/GUI/ConfigWizard.cpp:2524
 msgid "Filament Profiles Selection"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2097 src/slic3r/GUI/GUI_ObjectList.cpp:3637
+#: src/slic3r/GUI/ConfigWizard.cpp:2524 src/slic3r/GUI/ConfigWizard.cpp:2526
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4016
 msgid "Type:"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2099
+#: src/slic3r/GUI/ConfigWizard.cpp:2526
 msgid "SLA Material Profiles Selection"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2099
-msgid "Layer height:"
-msgstr ""
-
-#: src/slic3r/GUI/ConfigWizard.cpp:2196
+#: src/slic3r/GUI/ConfigWizard.cpp:2624
 msgid "Configuration Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2197
+#: src/slic3r/GUI/ConfigWizard.cpp:2625
 msgid "Configuration &Assistant"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2199
+#: src/slic3r/GUI/ConfigWizard.cpp:2627
 msgid "Configuration Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/ConfigWizard.cpp:2200
+#: src/slic3r/GUI/ConfigWizard.cpp:2628
 msgid "Configuration &Wizard"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:81
+#: src/slic3r/GUI/DoubleSlider.cpp:110
 msgid "Place bearings in slots and resume printing"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:952
+#: src/slic3r/GUI/DoubleSlider.cpp:1064
 msgid "One layer mode"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:954
+#: src/slic3r/GUI/DoubleSlider.cpp:1066
 msgid "Discard all custom changes"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:957
+#: src/slic3r/GUI/DoubleSlider.cpp:1071 src/slic3r/GUI/DoubleSlider.cpp:1852
+msgid "Jump to move"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1075
 #, possible-c-format
 msgid "Jump to height %s or Set extruder sequence for the entire print"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:959 src/slic3r/GUI/DoubleSlider.cpp:1531
-#: src/slic3r/GUI/DoubleSlider.cpp:1653
+#: src/slic3r/GUI/DoubleSlider.cpp:1077 src/slic3r/GUI/DoubleSlider.cpp:1721
+#: src/slic3r/GUI/DoubleSlider.cpp:1852 src/slic3r/GUI/DoubleSlider.cpp:1856
 msgid "Jump to height"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:962
+#: src/slic3r/GUI/DoubleSlider.cpp:1083
 msgid "Edit current color - Right click the colored slider segment"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:972
+#: src/slic3r/GUI/DoubleSlider.cpp:1093
 msgid "Print mode"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:986
+#: src/slic3r/GUI/DoubleSlider.cpp:1107
 msgid "Add extruder change - Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:988
+#: src/slic3r/GUI/DoubleSlider.cpp:1109
 msgid ""
 "Add color change - Left click for predefined color or Shift + Left click for "
 "custom color selection"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:990
+#: src/slic3r/GUI/DoubleSlider.cpp:1111
 msgid "Add color change - Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:991
+#: src/slic3r/GUI/DoubleSlider.cpp:1112
 msgid "or press \"+\" key"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:993
+#: src/slic3r/GUI/DoubleSlider.cpp:1114
 msgid "Add another code - Ctrl + Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:994
+#: src/slic3r/GUI/DoubleSlider.cpp:1115
 msgid "Add another code - Right click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1000
+#: src/slic3r/GUI/DoubleSlider.cpp:1121
 msgid ""
 "The sequential print is on.\n"
 "It's impossible to apply any custom G-code for objects printing "
@@ -965,203 +1004,227 @@ msgid ""
 "This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1009
+#: src/slic3r/GUI/DoubleSlider.cpp:1130
 msgid "Color change (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1010
+#: src/slic3r/GUI/DoubleSlider.cpp:1131
 msgid "Color change (\"%1%\") for Extruder %2%"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1012
+#: src/slic3r/GUI/DoubleSlider.cpp:1133
 msgid "Pause print (\"%1%\")"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1014
+#: src/slic3r/GUI/DoubleSlider.cpp:1135
+msgid "Custom template (\"%1%\")"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1137
 msgid "Extruder (tool) is changed to Extruder \"%1%\""
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1021
+#: src/slic3r/GUI/DoubleSlider.cpp:1144
 msgid "Note"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1023
+#: src/slic3r/GUI/DoubleSlider.cpp:1146
 msgid ""
 "G-code associated to this tick mark is in a conflict with print mode.\n"
 "Editing it will cause changes of Slider data."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1026
+#: src/slic3r/GUI/DoubleSlider.cpp:1149
 msgid ""
 "There is a color change for extruder that won't be used till the end of "
 "print job.\n"
 "This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1029
+#: src/slic3r/GUI/DoubleSlider.cpp:1152
 msgid ""
 "There is an extruder change set to the same extruder.\n"
 "This code won't be processed during G-code generation."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1032
+#: src/slic3r/GUI/DoubleSlider.cpp:1155
 msgid ""
 "There is a color change for extruder that has not been used before.\n"
 "Check your settings to avoid redundant color changes."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1037
+#: src/slic3r/GUI/DoubleSlider.cpp:1160
 msgid "Delete tick mark - Left click or press \"-\" key"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1039
+#: src/slic3r/GUI/DoubleSlider.cpp:1162
 msgid "Edit tick mark - Ctrl + Left click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1040
+#: src/slic3r/GUI/DoubleSlider.cpp:1163
 msgid "Edit tick mark - Right click"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1136 src/slic3r/GUI/DoubleSlider.cpp:1172
-#: src/slic3r/GUI/GLCanvas3D.cpp:996 src/slic3r/GUI/GUI_ObjectList.cpp:1718
-#: src/slic3r/GUI/Tab.cpp:2315 src/libslic3r/GCode/PreviewData.cpp:446
+#: src/slic3r/GUI/DoubleSlider.cpp:1263 src/slic3r/GUI/DoubleSlider.cpp:1297
+#: src/slic3r/GUI/GLCanvas3D.cpp:983 src/slic3r/GUI/GUI_ObjectList.cpp:1832
+#: src/slic3r/GUI/Tab.cpp:2489 src/libslic3r/GCode/PreviewData.cpp:450
 #, possible-c-format
 msgid "Extruder %d"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1137 src/slic3r/GUI/GUI_ObjectList.cpp:1719
+#: src/slic3r/GUI/DoubleSlider.cpp:1264 src/slic3r/GUI/GUI_ObjectList.cpp:1833
 msgid "active"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1146
+#: src/slic3r/GUI/DoubleSlider.cpp:1273
 msgid "Switch code to Change extruder"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1146 src/slic3r/GUI/GUI_ObjectList.cpp:1685
+#: src/slic3r/GUI/DoubleSlider.cpp:1273 src/slic3r/GUI/GUI_ObjectList.cpp:1800
 msgid "Change extruder"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1147
+#: src/slic3r/GUI/DoubleSlider.cpp:1274
 msgid "Change extruder (N/A)"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1149
+#: src/slic3r/GUI/DoubleSlider.cpp:1276
 msgid "Use another extruder"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1173
+#: src/slic3r/GUI/DoubleSlider.cpp:1298
 msgid "used"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1181
+#: src/slic3r/GUI/DoubleSlider.cpp:1306
 msgid "Switch code to Color change (%1%) for:"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1182
+#: src/slic3r/GUI/DoubleSlider.cpp:1307
 msgid "Add color change (%1%) for:"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1479
+#: src/slic3r/GUI/DoubleSlider.cpp:1665
 msgid "Add color change"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1489
+#: src/slic3r/GUI/DoubleSlider.cpp:1675
 msgid "Add pause print"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1492
+#: src/slic3r/GUI/DoubleSlider.cpp:1679
+msgid "Add custom template"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1682
 msgid "Add custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1510
+#: src/slic3r/GUI/DoubleSlider.cpp:1700
 msgid "Edit color"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1511
+#: src/slic3r/GUI/DoubleSlider.cpp:1701
 msgid "Edit pause print message"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1512
+#: src/slic3r/GUI/DoubleSlider.cpp:1702
 msgid "Edit custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1518
+#: src/slic3r/GUI/DoubleSlider.cpp:1708
 msgid "Delete color change"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1519
+#: src/slic3r/GUI/DoubleSlider.cpp:1709
 msgid "Delete tool change"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1520
+#: src/slic3r/GUI/DoubleSlider.cpp:1710
 msgid "Delete pause print"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1521
+#: src/slic3r/GUI/DoubleSlider.cpp:1711
 msgid "Delete custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1534
+#: src/slic3r/GUI/DoubleSlider.cpp:1728
 msgid "Set extruder sequence for the entire print"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1620
+#: src/slic3r/GUI/DoubleSlider.cpp:1814
 msgid "Enter custom G-code used on current layer"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1621
+#: src/slic3r/GUI/DoubleSlider.cpp:1815
 msgid "Custom G-code on current layer (%1% mm)."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1636
+#: src/slic3r/GUI/DoubleSlider.cpp:1830
 msgid "Enter short message shown on Printer display when a print is paused"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1637
+#: src/slic3r/GUI/DoubleSlider.cpp:1831
 msgid "Message for pause print on current layer (%1% mm)."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1652
+#: src/slic3r/GUI/DoubleSlider.cpp:1851
+msgid "Enter the move you want to jump to"
+msgstr ""
+
+#: src/slic3r/GUI/DoubleSlider.cpp:1851 src/slic3r/GUI/DoubleSlider.cpp:1855
 msgid "Enter the height you want to jump to"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1901
+#: src/slic3r/GUI/DoubleSlider.cpp:2118
 msgid "The last color change data was saved for a single extruder printing."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1902 src/slic3r/GUI/DoubleSlider.cpp:1918
+#: src/slic3r/GUI/DoubleSlider.cpp:2119 src/slic3r/GUI/DoubleSlider.cpp:2134
 msgid "The last color change data was saved for a multi extruder printing."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1904
+#: src/slic3r/GUI/DoubleSlider.cpp:2121
 msgid "Your current changes will delete all saved color changes."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1905 src/slic3r/GUI/DoubleSlider.cpp:1926
+#: src/slic3r/GUI/DoubleSlider.cpp:2122 src/slic3r/GUI/DoubleSlider.cpp:2142
 msgid "Are you sure you want to continue?"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1919
+#: src/slic3r/GUI/DoubleSlider.cpp:2135
 msgid ""
 "Select YES if you want to delete all saved tool changes, \n"
 "NO if you want all tool changes switch to color changes, \n"
 "or CANCEL to leave it unchanged."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1922
+#: src/slic3r/GUI/DoubleSlider.cpp:2138
 msgid "Do you want to delete all saved tool changes?"
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1924
+#: src/slic3r/GUI/DoubleSlider.cpp:2140
 msgid ""
 "The last color change data was saved for a multi extruder printing with tool "
 "changes for whole print."
 msgstr ""
 
-#: src/slic3r/GUI/DoubleSlider.cpp:1925
+#: src/slic3r/GUI/DoubleSlider.cpp:2141
 msgid "Your current changes will delete all saved extruder (tool) changes."
 msgstr ""
 
+#: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:496
+#: src/slic3r/GUI/GUI_ObjectList.cpp:508 src/slic3r/GUI/GUI_ObjectList.cpp:1015
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4454
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4464
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4499
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:202
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:259
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:284
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:492
+msgid "default"
+msgstr ""
+
 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:23
 msgid "Set extruder sequence"
 msgstr ""
@@ -1171,10 +1234,10 @@ msgid "Set extruder change for every"
 msgstr ""
 
 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:52
-#: src/libslic3r/PrintConfig.cpp:362 src/libslic3r/PrintConfig.cpp:994
-#: src/libslic3r/PrintConfig.cpp:1505 src/libslic3r/PrintConfig.cpp:1690
-#: src/libslic3r/PrintConfig.cpp:1757 src/libslic3r/PrintConfig.cpp:1937
-#: src/libslic3r/PrintConfig.cpp:1983
+#: src/libslic3r/PrintConfig.cpp:396 src/libslic3r/PrintConfig.cpp:1038
+#: src/libslic3r/PrintConfig.cpp:1613 src/libslic3r/PrintConfig.cpp:1798
+#: src/libslic3r/PrintConfig.cpp:1865 src/libslic3r/PrintConfig.cpp:2072
+#: src/libslic3r/PrintConfig.cpp:2118
 msgid "layers"
 msgstr ""
 
@@ -1190,33 +1253,34 @@ msgstr ""
 msgid "Add extruder to sequence"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:136
+#: src/slic3r/GUI/Field.cpp:184
 msgid "default value"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:139
+#: src/slic3r/GUI/Field.cpp:187
 msgid "parameter name"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:150 src/slic3r/GUI/OptionsGroup.cpp:598
+#: src/slic3r/GUI/Field.cpp:198 src/slic3r/GUI/OptionsGroup.cpp:715
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:874
 msgid "N/A"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:175
+#: src/slic3r/GUI/Field.cpp:223
 #, possible-c-format
 msgid "%s doesn't support percentage"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:195 src/slic3r/GUI/Field.cpp:226
-#: src/slic3r/GUI/Field.cpp:1298 src/slic3r/GUI/GUI_ObjectLayers.cpp:383
+#: src/slic3r/GUI/Field.cpp:243 src/slic3r/GUI/Field.cpp:274
+#: src/slic3r/GUI/Field.cpp:1358 src/slic3r/GUI/GUI_ObjectLayers.cpp:413
 msgid "Invalid numeric input."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:204 src/slic3r/GUI/Field.cpp:1310
+#: src/slic3r/GUI/Field.cpp:252 src/slic3r/GUI/Field.cpp:1370
 msgid "Input value is out of range"
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:240
+#: src/slic3r/GUI/Field.cpp:288
 #, possible-c-format
 msgid ""
 "Do you mean %s%% instead of %s %s?\n"
@@ -1224,7 +1288,7 @@ msgid ""
 "or NO if you are sure that %s %s is a correct value."
 msgstr ""
 
-#: src/slic3r/GUI/Field.cpp:243
+#: src/slic3r/GUI/Field.cpp:291
 msgid "Parameter validation"
 msgstr ""
 
@@ -1300,8 +1364,9 @@ msgstr ""
 msgid "Firmware image:"
 msgstr ""
 
-#: src/slic3r/GUI/FirmwareDialog.cpp:805 src/slic3r/GUI/Tab.cpp:1716
-#: src/slic3r/GUI/Tab.cpp:1778
+#: src/slic3r/GUI/FirmwareDialog.cpp:805
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:271
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:327
 msgid "Browse"
 msgstr ""
 
@@ -1334,8 +1399,8 @@ msgid "Advanced: Output log"
 msgstr ""
 
 #: src/slic3r/GUI/FirmwareDialog.cpp:852
-#: src/slic3r/GUI/Mouse3DController.cpp:371
-#: src/slic3r/GUI/PrintHostDialogs.cpp:161
+#: src/slic3r/GUI/Mouse3DController.cpp:353
+#: src/slic3r/GUI/PrintHostDialogs.cpp:159
 msgid "Close"
 msgstr ""
 
@@ -1353,405 +1418,715 @@ msgstr ""
 msgid "Cancelling..."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:238 src/slic3r/GUI/GLCanvas3D.cpp:4962
+#: src/slic3r/GUI/GCodeViewer.cpp:223
+msgid "Tool position"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:933
+msgid "Generating toolpaths"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:1318
+msgid "Generating vertex buffer"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:1392
+msgid "Generating index buffers"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2071
+msgid "Click to hide"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2071
+msgid "Click to show"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2183
+msgid "up to"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2189
+msgid "above"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2197
+msgid "from"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2197
+msgid "to"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2225 src/slic3r/GUI/GCodeViewer.cpp:2233
+#: src/slic3r/GUI/GUI_Preview.cpp:275 src/slic3r/GUI/GUI_Preview.cpp:787
+#: src/libslic3r/GCode/PreviewData.cpp:350
+msgid "Feature type"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2225 src/slic3r/GUI/GCodeViewer.cpp:2233
+#: src/slic3r/GUI/RammingChart.cpp:76
+msgid "Time"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2233
+msgid "Percentage"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2236 src/libslic3r/GCode/PreviewData.cpp:352
+msgid "Height (mm)"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2237 src/libslic3r/GCode/PreviewData.cpp:354
+msgid "Width (mm)"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2238 src/libslic3r/GCode/PreviewData.cpp:356
+msgid "Speed (mm/s)"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2239 src/libslic3r/GCode/PreviewData.cpp:358
+msgid "Fan Speed (%)"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2240 src/libslic3r/GCode/PreviewData.cpp:360
+msgid "Volumetric flow rate (mm³/s)"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2241 src/slic3r/GUI/GUI_Preview.cpp:281
+#: src/slic3r/GUI/GUI_Preview.cpp:453 src/slic3r/GUI/GUI_Preview.cpp:693
+#: src/slic3r/GUI/GUI_Preview.cpp:786 src/slic3r/GUI/GUI_Preview.cpp:1270
+#: src/libslic3r/GCode/PreviewData.cpp:362
+msgid "Tool"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2242 src/slic3r/GUI/GUI_Preview.cpp:282
+#: src/slic3r/GUI/GUI_Preview.cpp:784 src/libslic3r/GCode/PreviewData.cpp:364
+msgid "Color Print"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2277 src/slic3r/GUI/GCodeViewer.cpp:2313
+#: src/slic3r/GUI/GCodeViewer.cpp:2318 src/slic3r/GUI/GUI_ObjectList.cpp:296
+#: src/slic3r/GUI/Tab.cpp:1780 src/slic3r/GUI/wxExtensions.cpp:515
+#: src/libslic3r/PrintConfig.cpp:523
+msgid "Extruder"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2289
+msgid "Default color"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2313
+msgid "default color"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2410 src/slic3r/GUI/GCodeViewer.cpp:2438
+msgid "Color change"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2436 src/slic3r/GUI/GCodeViewer.cpp:2451
+msgid "Print"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2437 src/slic3r/GUI/GCodeViewer.cpp:2460
+#: src/slic3r/GUI/Plater.cpp:1199
+msgid "Pause"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2442 src/slic3r/GUI/GCodeViewer.cpp:2445
+msgid "Event"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2442 src/slic3r/GUI/GCodeViewer.cpp:2445
+msgid "Remaining time"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2445
+msgid "Duration"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2489 src/slic3r/GUI/GUI_Preview.cpp:335
+#: src/slic3r/GUI/GUI_Preview.cpp:1471 src/libslic3r/PrintConfig.cpp:2295
+msgid "Travel"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2492
+msgid "Movement"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2493
+msgid "Extrusion"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2494 src/slic3r/GUI/Tab.cpp:1670
+#: src/slic3r/GUI/Tab.cpp:2539
+msgid "Retraction"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2525 src/slic3r/GUI/GUI_Preview.cpp:320
+#: src/slic3r/GUI/GUI_Preview.cpp:333
+msgid "Options"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2528 src/slic3r/GUI/GUI_Preview.cpp:336
+#: src/slic3r/GUI/GUI_Preview.cpp:1472
+msgid "Retractions"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2529 src/slic3r/GUI/GUI_Preview.cpp:337
+#: src/slic3r/GUI/GUI_Preview.cpp:1473
+msgid "Deretractions"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2530 src/slic3r/GUI/GUI_Preview.cpp:1474
+msgid "Tool changes"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2531 src/slic3r/GUI/GUI_Preview.cpp:1475
+msgid "Color changes"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2532 src/slic3r/GUI/GUI_Preview.cpp:1476
+msgid "Pause prints"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2533 src/slic3r/GUI/GUI_Preview.cpp:1477
+msgid "Custom GCodes"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2552 src/slic3r/GUI/GCodeViewer.cpp:2557
+#: src/slic3r/GUI/Plater.cpp:246 src/slic3r/GUI/Plater.cpp:1125
+#: src/slic3r/GUI/Plater.cpp:1175 src/slic3r/GUI/Plater.cpp:1196
+msgid "Estimated printing time"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2552
+msgid "Normal mode"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2557
+msgid "Stealth mode"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2586
+msgid "Show stealth mode"
+msgstr ""
+
+#: src/slic3r/GUI/GCodeViewer.cpp:2591
+msgid "Show normal mode"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:231 src/slic3r/GUI/GLCanvas3D.cpp:4978
 msgid "Variable layer height"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:241
+#: src/slic3r/GUI/GLCanvas3D.cpp:233
 msgid "Left mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:244
+#: src/slic3r/GUI/GLCanvas3D.cpp:235
 msgid "Add detail"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:247
+#: src/slic3r/GUI/GLCanvas3D.cpp:237
 msgid "Right mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:250
+#: src/slic3r/GUI/GLCanvas3D.cpp:239
 msgid "Remove detail"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:253
+#: src/slic3r/GUI/GLCanvas3D.cpp:241
 msgid "Shift + Left mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:256
+#: src/slic3r/GUI/GLCanvas3D.cpp:243
 msgid "Reset to base"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:259
+#: src/slic3r/GUI/GLCanvas3D.cpp:245
 msgid "Shift + Right mouse button:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:262
+#: src/slic3r/GUI/GLCanvas3D.cpp:247
 msgid "Smoothing"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:265
+#: src/slic3r/GUI/GLCanvas3D.cpp:249
 msgid "Mouse wheel:"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:268
+#: src/slic3r/GUI/GLCanvas3D.cpp:251
 msgid "Increase/decrease edit area"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:271
+#: src/slic3r/GUI/GLCanvas3D.cpp:254
 msgid "Adaptive"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:277
+#: src/slic3r/GUI/GLCanvas3D.cpp:260
 msgid "Quality / Speed"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:281
+#: src/slic3r/GUI/GLCanvas3D.cpp:263
 msgid "Higher print quality versus higher print speed."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:292
+#: src/slic3r/GUI/GLCanvas3D.cpp:274
 msgid "Smooth"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:298 src/libslic3r/PrintConfig.cpp:511
+#: src/slic3r/GUI/GLCanvas3D.cpp:280 src/libslic3r/PrintConfig.cpp:547
 msgid "Radius"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:308
+#: src/slic3r/GUI/GLCanvas3D.cpp:290
 msgid "Keep min"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:317
+#: src/slic3r/GUI/GLCanvas3D.cpp:299
 msgid "Reset"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:607
+#: src/slic3r/GUI/GLCanvas3D.cpp:565
 msgid "Variable layer height - Manual edit"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:693
-msgid "An object outside the print area was detected"
+#: src/slic3r/GUI/GLCanvas3D.cpp:633
+msgid "An object outside the print area was detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:694
-msgid "A toolpath outside the print area was detected"
+#: src/slic3r/GUI/GLCanvas3D.cpp:634
+msgid "A toolpath outside the print area was detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:695
-msgid "SLA supports outside the print area were detected"
+#: src/slic3r/GUI/GLCanvas3D.cpp:635
+msgid "SLA supports outside the print area were detected."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:696
-msgid "Some objects are not visible"
+#: src/slic3r/GUI/GLCanvas3D.cpp:636
+msgid "Some objects are not visible."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:698
+#: src/slic3r/GUI/GLCanvas3D.cpp:638
 msgid ""
-"An object outside the print area was detected\n"
-"Resolve the current problem to continue slicing"
+"An object outside the print area was detected.\n"
+"Resolve the current problem to continue slicing."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:923 src/slic3r/GUI/GLCanvas3D.cpp:952
+#: src/slic3r/GUI/GLCanvas3D.cpp:910 src/slic3r/GUI/GLCanvas3D.cpp:939
 msgid "Default print color"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:953 src/slic3r/GUI/GLCanvas3D.cpp:962
-#: src/slic3r/GUI/GLCanvas3D.cpp:1001
+#: src/slic3r/GUI/GLCanvas3D.cpp:940 src/slic3r/GUI/GLCanvas3D.cpp:949
+#: src/slic3r/GUI/GLCanvas3D.cpp:988
 msgid "Pause print or custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:974
+#: src/slic3r/GUI/GLCanvas3D.cpp:961
 #, possible-c-format
 msgid "up to %.2f mm"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:978
+#: src/slic3r/GUI/GLCanvas3D.cpp:965
 #, possible-c-format
 msgid "above %.2f mm"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:982
+#: src/slic3r/GUI/GLCanvas3D.cpp:969
 #, possible-c-format
 msgid "%.2f - %.2f mm"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1014
+#: src/slic3r/GUI/GLCanvas3D.cpp:1001
 #, possible-c-format
 msgid "Color change for Extruder %d at %.2f mm"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1332
+#: src/slic3r/GUI/GLCanvas3D.cpp:1312
 msgid "Seq."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1439
+#: src/slic3r/GUI/GLCanvas3D.cpp:1418
 msgid "canvas_tooltip"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1466
-msgid "Slope visualization"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:1468
-msgid "Facets' normal angle range (degrees)"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:1495 src/slic3r/GUI/GUI_ObjectList.cpp:1718
-#: src/libslic3r/PrintConfig.cpp:335
-msgid "Default"
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3D.cpp:1880
+#: src/slic3r/GUI/GLCanvas3D.cpp:1778
 msgid "Variable layer height - Reset"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1888
+#: src/slic3r/GUI/GLCanvas3D.cpp:1786
 msgid "Variable layer height - Adaptive"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:1896
+#: src/slic3r/GUI/GLCanvas3D.cpp:1794
 msgid "Variable layer height - Smooth all"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:2332
+#: src/slic3r/GUI/GLCanvas3D.cpp:2226
 msgid "Mirror Object"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3224
-#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:519
-#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:746
+#: src/slic3r/GUI/GLCanvas3D.cpp:3165
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520
 msgid "Gizmo-Move"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3308
-#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521
-#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:748
+#: src/slic3r/GUI/GLCanvas3D.cpp:3249
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522
 msgid "Gizmo-Rotate"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:3880
+#: src/slic3r/GUI/GLCanvas3D.cpp:3810
 msgid "Move Object"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4425
+#: src/slic3r/GUI/GLCanvas3D.cpp:4302 src/slic3r/GUI/GLCanvas3D.cpp:4939
+msgid "Switch to Settings"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4303 src/slic3r/GUI/GLCanvas3D.cpp:4939
+msgid "Print Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4304 src/slic3r/GUI/GLCanvas3D.cpp:4940
+msgid "Filament Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4304 src/slic3r/GUI/GLCanvas3D.cpp:4940
+msgid "Material Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4305 src/slic3r/GUI/GLCanvas3D.cpp:4941
+msgid "Printer Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4361
 msgid "Undo History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4425
+#: src/slic3r/GUI/GLCanvas3D.cpp:4361
 msgid "Redo History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4446
+#: src/slic3r/GUI/GLCanvas3D.cpp:4382
 #, possible-c-format
 msgid "Undo %1$d Action"
 msgid_plural "Undo %1$d Actions"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4446
+#: src/slic3r/GUI/GLCanvas3D.cpp:4382
 #, possible-c-format
 msgid "Redo %1$d Action"
 msgid_plural "Redo %1$d Actions"
 msgstr[0] ""
 msgstr[1] ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4856
+#: src/slic3r/GUI/GLCanvas3D.cpp:4402 src/slic3r/GUI/GLCanvas3D.cpp:4957
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:130 src/slic3r/GUI/Search.cpp:426
+msgid "Search"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4416 src/slic3r/GUI/GLCanvas3D.cpp:4424
+#: src/slic3r/GUI/Search.cpp:433
+msgid "Type here to search"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:4833
 msgid "Add..."
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4864 src/slic3r/GUI/GUI_ObjectList.cpp:1732
-#: src/slic3r/GUI/Plater.cpp:3935 src/slic3r/GUI/Plater.cpp:3957
-#: src/slic3r/GUI/Tab.cpp:3155
+#: src/slic3r/GUI/GLCanvas3D.cpp:4841 src/slic3r/GUI/GUI_ObjectList.cpp:1846
+#: src/slic3r/GUI/Plater.cpp:3849 src/slic3r/GUI/Plater.cpp:3871
+#: src/slic3r/GUI/Tab.cpp:3423
 msgid "Delete"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4873 src/slic3r/GUI/KBShortcutsDialog.cpp:131
-#: src/slic3r/GUI/Plater.cpp:4705
+#: src/slic3r/GUI/GLCanvas3D.cpp:4850 src/slic3r/GUI/KBShortcutsDialog.cpp:124
+#: src/slic3r/GUI/Plater.cpp:4774
 msgid "Delete all"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4882 src/slic3r/GUI/KBShortcutsDialog.cpp:160
-#: src/slic3r/GUI/Plater.cpp:2815
+#: src/slic3r/GUI/GLCanvas3D.cpp:4859 src/slic3r/GUI/KBShortcutsDialog.cpp:151
+#: src/slic3r/GUI/Plater.cpp:1549
 msgid "Arrange"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4882 src/slic3r/GUI/KBShortcutsDialog.cpp:161
+#: src/slic3r/GUI/GLCanvas3D.cpp:4859 src/slic3r/GUI/KBShortcutsDialog.cpp:152
 msgid "Arrange selection"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4894
+#: src/slic3r/GUI/GLCanvas3D.cpp:4871
 msgid "Copy"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4903
+#: src/slic3r/GUI/GLCanvas3D.cpp:4880
 msgid "Paste"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4915 src/slic3r/GUI/Plater.cpp:3794
-#: src/slic3r/GUI/Plater.cpp:3806 src/slic3r/GUI/Plater.cpp:3944
+#: src/slic3r/GUI/GLCanvas3D.cpp:4892 src/slic3r/GUI/Plater.cpp:3708
+#: src/slic3r/GUI/Plater.cpp:3720 src/slic3r/GUI/Plater.cpp:3858
 msgid "Add instance"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4926 src/slic3r/GUI/Plater.cpp:3946
+#: src/slic3r/GUI/GLCanvas3D.cpp:4903 src/slic3r/GUI/Plater.cpp:3860
 msgid "Remove instance"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4939
+#: src/slic3r/GUI/GLCanvas3D.cpp:4916
 msgid "Split to objects"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:4949 src/slic3r/GUI/GUI_ObjectList.cpp:1501
+#: src/slic3r/GUI/GLCanvas3D.cpp:4926 src/slic3r/GUI/GUI_ObjectList.cpp:1618
 msgid "Split to parts"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5013 src/slic3r/GUI/KBShortcutsDialog.cpp:132
-#: src/slic3r/GUI/MainFrame.cpp:717
+#: src/slic3r/GUI/GLCanvas3D.cpp:5028 src/slic3r/GUI/KBShortcutsDialog.cpp:125
+#: src/slic3r/GUI/MainFrame.cpp:1187
 msgid "Undo"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5013 src/slic3r/GUI/GLCanvas3D.cpp:5052
+#: src/slic3r/GUI/GLCanvas3D.cpp:5028 src/slic3r/GUI/GLCanvas3D.cpp:5067
 msgid "Click right mouse button to open/close History"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5036
+#: src/slic3r/GUI/GLCanvas3D.cpp:5051
 msgid "Next Undo action: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5052 src/slic3r/GUI/KBShortcutsDialog.cpp:133
-#: src/slic3r/GUI/MainFrame.cpp:720
+#: src/slic3r/GUI/GLCanvas3D.cpp:5067 src/slic3r/GUI/KBShortcutsDialog.cpp:126
+#: src/slic3r/GUI/MainFrame.cpp:1190
 msgid "Redo"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:5074
+#: src/slic3r/GUI/GLCanvas3D.cpp:5089
 msgid "Next Redo action: %1%"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7064
+#: src/slic3r/GUI/GLCanvas3D.cpp:7193
 msgid "Selection-Add from rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3D.cpp:7083
+#: src/slic3r/GUI/GLCanvas3D.cpp:7212
 msgid "Selection-Remove from rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/GLCanvas3DManager.cpp:365
-#, possible-c-format
-msgid ""
-"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
-"while OpenGL version %s, render %s, vendor %s was detected."
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3DManager.cpp:368
-msgid "You may need to update your graphics card driver."
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3DManager.cpp:371
-msgid ""
-"As a workaround, you may run PrusaSlicer with a software rendered 3D "
-"graphics by running prusa-slicer.exe with the --sw_renderer parameter."
-msgstr ""
-
-#: src/slic3r/GUI/GLCanvas3DManager.cpp:373
-msgid "Unsupported OpenGL version"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:47
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:145 src/libslic3r/PrintConfig.cpp:3424
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:48
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:146 src/libslic3r/PrintConfig.cpp:3601
 msgid "Cut"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:169
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170
 msgid "Keep upper part"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:170
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:171
 msgid "Keep lower part"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:171
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:172
 msgid "Rotate lower part upwards"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:176
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:177
 msgid "Perform cut"
 msgstr ""
 
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:33
+msgid "FDM Support Editing"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:25
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57
+msgid "Clipping of view"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:26
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58
+msgid "Reset direction"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:44
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:27
+msgid "Cursor size"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:45
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:28
+msgid "Cursor type"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:46
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:29
+msgid "Left mouse button"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:47
+msgid "Enforce supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:48
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:31
+msgid "Right mouse button"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:49
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:373
+msgid "Block supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:50
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:33
+msgid "Shift + Left mouse button"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:51
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:34
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:368
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:378
+msgid "Remove selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:52
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:35
+msgid "Remove all selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:53
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:36
+msgid "Circle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:37
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
+msgid "Sphere"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:136
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:118
+msgid "Reset selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:160
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:141
+msgid "Alt + Mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:178
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:159
+msgid "Paints all facets inside, regardless of their orientation."
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:192
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:173
+msgid "Ignores facets facing away from the camera."
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:225
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:203
+msgid "Ctrl + Mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:233
+msgid "Autoset custom supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235
+msgid "Threshold:"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:235
+msgid "deg"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:239
+msgid "Enforce"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:242
+msgid "Block"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:292
+msgid "Block supports by angle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:293
+msgid "Add supports by angle"
+msgstr ""
+
 #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:41
 msgid "Place on face"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:38
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
 msgid "Hollow this object"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:39
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
 msgid "Preview hollowed and drilled model"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:40
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42
 msgid "Offset"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:41
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43
 msgid "Quality"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:42
-#: src/libslic3r/PrintConfig.cpp:2951
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
+#: src/libslic3r/PrintConfig.cpp:3098
 msgid "Closing distance"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:43
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45
 msgid "Hole diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:44
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46
 msgid "Hole depth"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:45
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47
 msgid "Remove selected holes"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:46
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48
 msgid "Remove all holes"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:47
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56
-msgid "Clipping of view"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:48
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57
-msgid "Reset direction"
-msgstr ""
-
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:51
 msgid "Show supports"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:307
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:308
 msgid "Add drainage hole"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:428
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:424
 msgid "Delete drainage hole"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:628
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:624
 msgid "Hollowing parameter change"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:699
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:693
 msgid "Change drainage hole diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:791
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:785
 msgid "Hollow and drill"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:846
+#: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:835
 msgid "Move drainage hole"
 msgstr ""
 
@@ -1759,211 +2134,284 @@ msgstr ""
 msgid "Move"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:449
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:480
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:499
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:517
-#: src/libslic3r/PrintConfig.cpp:3473
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:210
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:224
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506
+#: src/slic3r/GUI/Mouse3DController.cpp:288
+#: src/slic3r/GUI/Mouse3DController.cpp:309
+msgid "Rotation"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:220 src/slic3r/GUI/Plater.cpp:3961
+msgid "Optimize orientation"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:221
+#: src/libslic3r/PrintConfig.cpp:3089
+msgid "Accuracy"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:233
+msgid "Least supports"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:234
+msgid "Suface quality"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:513
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:527
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:546
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562
+#: src/libslic3r/PrintConfig.cpp:3650
 msgid "Rotate"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:79
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:500
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:518
-#: src/libslic3r/PrintConfig.cpp:3488
+#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:78
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563
+#: src/libslic3r/PrintConfig.cpp:3665
 msgid "Scale"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:46
-msgid "Head diameter"
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:30
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:381
+msgid "Enforce seam"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:32
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:383
+msgid "Block seam"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:46
+msgid "Seam Editing"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
-msgid "Lock supports under new islands"
+msgid "Head diameter"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
-msgid "Remove selected points"
+msgid "Lock supports under new islands"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
-msgid "Remove all points"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218
+msgid "Remove selected points"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
-msgid "Apply changes"
+msgid "Remove all points"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
-msgid "Discard changes"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
+msgid "Apply changes"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52
-msgid "Minimal points distance"
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
+msgid "Discard changes"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
-#: src/libslic3r/PrintConfig.cpp:2781
-msgid "Support points density"
+msgid "Minimal points distance"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
-msgid "Auto-generate points"
+#: src/libslic3r/PrintConfig.cpp:2928
+msgid "Support points density"
 msgstr ""
 
 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224
+msgid "Auto-generate points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56
 msgid "Manual editing"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:373
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:374
 msgid "Add support point"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:513
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:514
 msgid "Delete support point"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:693
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:694
 msgid "Change point head diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:761
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:762
 msgid "Support parameter change"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:868
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869
 msgid "SLA Support Points"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:893
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897
 msgid "SLA gizmo turned on"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:909
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:911
 msgid "Do you want to save your manually edited support points?"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:910
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912
 msgid "Save changes?"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:922
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:924
 msgid "SLA gizmo turned off"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:953
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:955
 msgid "Move support point"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1046
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1048
 msgid "Support points edit"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1125
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127
 msgid "Autogeneration will erase all manually edited points."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1126
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1128
 msgid "Are you sure you want to do it?"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1127 src/slic3r/GUI/GUI.cpp:258
-#: src/slic3r/GUI/Tab.cpp:3085 src/slic3r/GUI/WipeTowerDialog.cpp:45
-#: src/slic3r/GUI/WipeTowerDialog.cpp:366
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129 src/slic3r/GUI/GUI.cpp:256
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:478
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:502
+#: src/slic3r/GUI/WipeTowerDialog.cpp:45 src/slic3r/GUI/WipeTowerDialog.cpp:366
 msgid "Warning"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1132
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1134
 msgid "Autogenerate support points"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1179
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1181
 msgid "SLA gizmo keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1190
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192
 msgid "Note: some shortcuts work in (non)editing mode only."
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1208
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
 msgid "Left click"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1208
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
 msgid "Add point"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1209
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
 msgid "Right click"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1209
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
 msgid "Remove point"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
 msgid "Drag"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
 msgid "Move point"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
 msgid "Add point to selection"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
 msgid "Remove point from selection"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
 msgid "Select by rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216
 msgid "Deselect by rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217
 msgid "Select all points"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
 msgid "Mouse wheel"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219
 msgid "Move clipping plane"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220
 msgid "Reset clipping plane"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223
 msgid "Switch to editing mode"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520
-#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:747
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521
 msgid "Gizmo-Scale"
 msgstr ""
 
-#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:662
+#: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:639
 msgid "Gizmo-Place on Face"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:234
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:39
+msgid "Supports gizmo turned on"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:40
+msgid "Seam gizmo turned on"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:47
+msgid "Seam gizmo turned off"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:48
+msgid "Supports gizmo turned off"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp:371
+msgid "Add supports"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:243
+msgid "is based on Slic3r by Alessandro Ranellucci and the RepRap community."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:245
+msgid ""
+"Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas "
+"Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:246
+msgid "Artwork model by Nora Al-Badri and Jan Nikolai Nelles"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:528
 #, possible-c-format
 msgid ""
 "%s has encountered an error. It was likely caused by running out of memory. "
@@ -1973,228 +2421,284 @@ msgid ""
 "The application will now terminate."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:237
+#: src/slic3r/GUI/GUI_App.cpp:531
 msgid "Fatal error"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:554
-msgid "Changing of an application language"
+#: src/slic3r/GUI/GUI_App.cpp:655 src/slic3r/GUI/GUI_App.cpp:670
+msgid ""
+"Error parsing PrusaSlicer config file, it is probably corrupted. Try to "
+"manually delete the file to recover from the error. Your user profiles will "
+"not be affected."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:557 src/slic3r/GUI/GUI_App.cpp:565
+#: src/slic3r/GUI/GUI_App.cpp:661
+msgid ""
+"Error parsing PrusaGCodeViewer config file, it is probably corrupted. Try to "
+"manually delete the file to recover from the error."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:718
+#, possible-c-format
+msgid ""
+"%s\n"
+"Do you want to continue?"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:720 src/slic3r/GUI/UnsavedChangesDialog.cpp:653
+msgid "Remember my choice"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:759
+msgid "Loading configuration..."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:825
+msgid "Creating settings tabs..."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1078
+msgid ""
+"You have the following presets with saved options for \"Print Host upload\""
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1082
+msgid ""
+"But from this version of PrusaSlicer we don't show/use this information in "
+"Printer Settings.\n"
+"Now, this information will be exposed in physical printers settings."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1084
+msgid ""
+"By default new Printer devices will be named as \"Printer N\" during its "
+"creation.\n"
+"Note: This name can be changed later from the physical printers settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1087 src/slic3r/GUI/Tab.cpp:3435
+msgid "Information"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1102 src/slic3r/GUI/GUI_App.cpp:1115
 msgid "Recreating"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:570
+#: src/slic3r/GUI/GUI_App.cpp:1120
 msgid "Loading of current presets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:575
+#: src/slic3r/GUI/GUI_App.cpp:1125
 msgid "Loading of a mode view"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:654
+#: src/slic3r/GUI/GUI_App.cpp:1208
 msgid "Choose one file (3MF/AMF):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:672
+#: src/slic3r/GUI/GUI_App.cpp:1220
 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:733
+#: src/slic3r/GUI/GUI_App.cpp:1233
+msgid "Choose one file (GCODE/.GCO/.G/.ngc/NGC):"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1245
+msgid "Changing of an application language"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1295
 msgid "Select the language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:733
+#: src/slic3r/GUI/GUI_App.cpp:1295
 msgid "Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:911
+#: src/slic3r/GUI/GUI_App.cpp:1425
+msgid "modified"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1474
 #, possible-c-format
 msgid "Run %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:914
+#: src/slic3r/GUI/GUI_App.cpp:1480
 msgid "&Configuration Snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:914
+#: src/slic3r/GUI/GUI_App.cpp:1480
 msgid "Inspect / activate configuration snapshots"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:915
+#: src/slic3r/GUI/GUI_App.cpp:1481
 msgid "Take Configuration &Snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:915
+#: src/slic3r/GUI/GUI_App.cpp:1481
 msgid "Capture a configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:916
+#: src/slic3r/GUI/GUI_App.cpp:1482
 msgid "Check for updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:916
+#: src/slic3r/GUI/GUI_App.cpp:1482
 msgid "Check for configuration updates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:918
+#: src/slic3r/GUI/GUI_App.cpp:1487
 msgid "&Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:924
+#: src/slic3r/GUI/GUI_App.cpp:1493
 msgid "Application preferences"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:927 src/slic3r/GUI/wxExtensions.cpp:756
+#: src/slic3r/GUI/GUI_App.cpp:1504 src/slic3r/GUI/wxExtensions.cpp:673
 msgid "Simple"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:927
+#: src/slic3r/GUI/GUI_App.cpp:1504
 msgid "Simple View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:929 src/slic3r/GUI/wxExtensions.cpp:758
+#: src/slic3r/GUI/GUI_App.cpp:1506 src/slic3r/GUI/wxExtensions.cpp:675
 msgctxt "Mode"
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:929
+#: src/slic3r/GUI/GUI_App.cpp:1506
 msgid "Advanced View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:930 src/slic3r/GUI/wxExtensions.cpp:759
+#: src/slic3r/GUI/GUI_App.cpp:1507 src/slic3r/GUI/wxExtensions.cpp:676
 msgid "Expert"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:930
+#: src/slic3r/GUI/GUI_App.cpp:1507
 msgid "Expert View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:935
+#: src/slic3r/GUI/GUI_App.cpp:1512
 msgid "Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:935
+#: src/slic3r/GUI/GUI_App.cpp:1512
 #, possible-c-format
 msgid "%s View Mode"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:937
+#: src/slic3r/GUI/GUI_App.cpp:1517
 msgid "&Language"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:939
+#: src/slic3r/GUI/GUI_App.cpp:1522
 msgid "Flash printer &firmware"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:939
+#: src/slic3r/GUI/GUI_App.cpp:1522
 msgid "Upload a firmware image into an Arduino based printer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:1540
 msgid "Taking configuration snapshot"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:954
+#: src/slic3r/GUI/GUI_App.cpp:1540
 msgid "Snapshot name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1001
+#: src/slic3r/GUI/GUI_App.cpp:1605 src/slic3r/GUI/GUI_App.cpp:1614
+msgid "Language selection"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:1608
 msgid ""
 "Switching the language will trigger application restart.\n"
 "You will lose content of the plater."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1003
+#: src/slic3r/GUI/GUI_App.cpp:1610
 msgid "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1004
-msgid "Language selection"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:1028
+#: src/slic3r/GUI/GUI_App.cpp:1645
 msgid "&Configuration"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1052
-msgid "The presets on the following tabs were modified"
+#: src/slic3r/GUI/GUI_App.cpp:1676
+msgid "The preset(s) modifications are successfully saved"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1052 src/slic3r/GUI/Tab.cpp:2945
-msgid "Discard changes and continue anyway?"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:1055
-msgid "Unsaved Presets"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_App.cpp:1204 src/slic3r/GUI/Tab.cpp:2957
+#: src/slic3r/GUI/GUI_App.cpp:1876 src/slic3r/GUI/Tab.cpp:3187
 msgid "It's impossible to print multi-part object(s) with SLA technology."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1205
+#: src/slic3r/GUI/GUI_App.cpp:1877
 msgid "Please check and fix your object list."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1206 src/slic3r/GUI/Plater.cpp:2377
-#: src/slic3r/GUI/Tab.cpp:2959
+#: src/slic3r/GUI/GUI_App.cpp:1878 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
+#: src/slic3r/GUI/Plater.cpp:2256 src/slic3r/GUI/Tab.cpp:3189
 msgid "Attention!"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_App.cpp:1223
+#: src/slic3r/GUI/GUI_App.cpp:1895
 msgid "Select a gcode file:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
 msgid "Start at height"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:27
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
 msgid "Stop at height"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:158
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:161
 msgid "Remove layer range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectLayers.cpp:162
+#: src/slic3r/GUI/GUI_ObjectLayers.cpp:165
 msgid "Add layer range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:95
-#: src/slic3r/GUI/GUI_ObjectList.cpp:617 src/libslic3r/PrintConfig.cpp:72
-#: src/libslic3r/PrintConfig.cpp:175 src/libslic3r/PrintConfig.cpp:184
-#: src/libslic3r/PrintConfig.cpp:408 src/libslic3r/PrintConfig.cpp:470
-#: src/libslic3r/PrintConfig.cpp:478 src/libslic3r/PrintConfig.cpp:890
-#: src/libslic3r/PrintConfig.cpp:1075 src/libslic3r/PrintConfig.cpp:1374
-#: src/libslic3r/PrintConfig.cpp:1441 src/libslic3r/PrintConfig.cpp:1622
-#: src/libslic3r/PrintConfig.cpp:2081 src/libslic3r/PrintConfig.cpp:2140
-#: src/libslic3r/PrintConfig.cpp:2149
+#: src/slic3r/GUI/GUI_ObjectList.cpp:34 src/slic3r/GUI/GUI_ObjectList.cpp:92
+#: src/slic3r/GUI/GUI_ObjectList.cpp:651 src/libslic3r/PrintConfig.cpp:72
+#: src/libslic3r/PrintConfig.cpp:209 src/libslic3r/PrintConfig.cpp:218
+#: src/libslic3r/PrintConfig.cpp:442 src/libslic3r/PrintConfig.cpp:506
+#: src/libslic3r/PrintConfig.cpp:514 src/libslic3r/PrintConfig.cpp:932
+#: src/libslic3r/PrintConfig.cpp:1119 src/libslic3r/PrintConfig.cpp:1482
+#: src/libslic3r/PrintConfig.cpp:1549 src/libslic3r/PrintConfig.cpp:1730
+#: src/libslic3r/PrintConfig.cpp:2217 src/libslic3r/PrintConfig.cpp:2276
+#: src/libslic3r/PrintConfig.cpp:2285
 msgid "Layers and Perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:97
-#: src/slic3r/GUI/GUI_ObjectList.cpp:619 src/slic3r/GUI/GUI_Preview.cpp:305
-#: src/slic3r/GUI/Tab.cpp:1188 src/slic3r/GUI/Tab.cpp:1189
-#: src/libslic3r/ExtrusionEntity.cpp:319 src/libslic3r/PrintConfig.cpp:370
-#: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1873
-#: src/libslic3r/PrintConfig.cpp:1879 src/libslic3r/PrintConfig.cpp:1887
-#: src/libslic3r/PrintConfig.cpp:1899 src/libslic3r/PrintConfig.cpp:1909
-#: src/libslic3r/PrintConfig.cpp:1917 src/libslic3r/PrintConfig.cpp:1932
-#: src/libslic3r/PrintConfig.cpp:1953 src/libslic3r/PrintConfig.cpp:1965
-#: src/libslic3r/PrintConfig.cpp:1981 src/libslic3r/PrintConfig.cpp:1990
-#: src/libslic3r/PrintConfig.cpp:1999 src/libslic3r/PrintConfig.cpp:2010
-#: src/libslic3r/PrintConfig.cpp:2024 src/libslic3r/PrintConfig.cpp:2032
-#: src/libslic3r/PrintConfig.cpp:2033 src/libslic3r/PrintConfig.cpp:2042
-#: src/libslic3r/PrintConfig.cpp:2050 src/libslic3r/PrintConfig.cpp:2064
+#: src/slic3r/GUI/GUI_ObjectList.cpp:36 src/slic3r/GUI/GUI_ObjectList.cpp:95
+#: src/slic3r/GUI/GUI_ObjectList.cpp:654 src/slic3r/GUI/GUI_Preview.cpp:311
+#: src/slic3r/GUI/Tab.cpp:1449 src/slic3r/GUI/Tab.cpp:1450
+#: src/libslic3r/ExtrusionEntity.cpp:324 src/libslic3r/ExtrusionEntity.cpp:356
+#: src/libslic3r/PrintConfig.cpp:404 src/libslic3r/PrintConfig.cpp:1610
+#: src/libslic3r/PrintConfig.cpp:2008 src/libslic3r/PrintConfig.cpp:2014
+#: src/libslic3r/PrintConfig.cpp:2022 src/libslic3r/PrintConfig.cpp:2034
+#: src/libslic3r/PrintConfig.cpp:2044 src/libslic3r/PrintConfig.cpp:2052
+#: src/libslic3r/PrintConfig.cpp:2067 src/libslic3r/PrintConfig.cpp:2088
+#: src/libslic3r/PrintConfig.cpp:2100 src/libslic3r/PrintConfig.cpp:2116
+#: src/libslic3r/PrintConfig.cpp:2125 src/libslic3r/PrintConfig.cpp:2134
+#: src/libslic3r/PrintConfig.cpp:2145 src/libslic3r/PrintConfig.cpp:2159
+#: src/libslic3r/PrintConfig.cpp:2167 src/libslic3r/PrintConfig.cpp:2168
+#: src/libslic3r/PrintConfig.cpp:2177 src/libslic3r/PrintConfig.cpp:2185
+#: src/libslic3r/PrintConfig.cpp:2199
 msgid "Support material"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:101
-#: src/slic3r/GUI/GUI_ObjectList.cpp:623 src/libslic3r/PrintConfig.cpp:2259
-#: src/libslic3r/PrintConfig.cpp:2267
+#: src/slic3r/GUI/GUI_ObjectList.cpp:39 src/slic3r/GUI/GUI_ObjectList.cpp:99
+#: src/slic3r/GUI/GUI_ObjectList.cpp:658 src/libslic3r/PrintConfig.cpp:2395
+#: src/libslic3r/PrintConfig.cpp:2403
 msgid "Wipe options"
 msgstr ""
 
@@ -2218,411 +2722,432 @@ msgstr ""
 msgid "Add support blocker"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:620
-#: src/slic3r/GUI/GUI_Preview.cpp:283 src/slic3r/GUI/Tab.cpp:1213
-#: src/libslic3r/PrintConfig.cpp:235 src/libslic3r/PrintConfig.cpp:458
-#: src/libslic3r/PrintConfig.cpp:919 src/libslic3r/PrintConfig.cpp:1048
-#: src/libslic3r/PrintConfig.cpp:1431 src/libslic3r/PrintConfig.cpp:1668
-#: src/libslic3r/PrintConfig.cpp:1723 src/libslic3r/PrintConfig.cpp:1775
-#: src/libslic3r/PrintConfig.cpp:2125
+#: src/slic3r/GUI/GUI_ObjectList.cpp:94 src/slic3r/GUI/GUI_ObjectList.cpp:653
+#: src/slic3r/GUI/GUI_Preview.cpp:307 src/slic3r/GUI/Tab.cpp:1420
+#: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/ExtrusionEntity.cpp:348
+#: src/libslic3r/PrintConfig.cpp:1126 src/libslic3r/PrintConfig.cpp:1132
+#: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:1156
+msgid "Ironing"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:96 src/slic3r/GUI/GUI_ObjectList.cpp:655
+#: src/slic3r/GUI/GUI_Preview.cpp:278 src/slic3r/GUI/Tab.cpp:1474
+#: src/libslic3r/PrintConfig.cpp:269 src/libslic3r/PrintConfig.cpp:494
+#: src/libslic3r/PrintConfig.cpp:963 src/libslic3r/PrintConfig.cpp:1092
+#: src/libslic3r/PrintConfig.cpp:1165 src/libslic3r/PrintConfig.cpp:1539
+#: src/libslic3r/PrintConfig.cpp:1776 src/libslic3r/PrintConfig.cpp:1831
+#: src/libslic3r/PrintConfig.cpp:1883 src/libslic3r/PrintConfig.cpp:2261
 msgid "Speed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:99 src/slic3r/GUI/GUI_ObjectList.cpp:621
-#: src/slic3r/GUI/Tab.cpp:1248 src/slic3r/GUI/Tab.cpp:1871
-#: src/libslic3r/PrintConfig.cpp:488 src/libslic3r/PrintConfig.cpp:1002
-#: src/libslic3r/PrintConfig.cpp:1409 src/libslic3r/PrintConfig.cpp:1744
-#: src/libslic3r/PrintConfig.cpp:1945 src/libslic3r/PrintConfig.cpp:1972
+#: src/slic3r/GUI/GUI_ObjectList.cpp:97 src/slic3r/GUI/GUI_ObjectList.cpp:656
+#: src/slic3r/GUI/Tab.cpp:1510 src/slic3r/GUI/Tab.cpp:2072
+#: src/libslic3r/PrintConfig.cpp:524 src/libslic3r/PrintConfig.cpp:1046
+#: src/libslic3r/PrintConfig.cpp:1517 src/libslic3r/PrintConfig.cpp:1852
+#: src/libslic3r/PrintConfig.cpp:2080 src/libslic3r/PrintConfig.cpp:2107
 msgid "Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:100 src/slic3r/GUI/GUI_ObjectList.cpp:622
-#: src/libslic3r/PrintConfig.cpp:447 src/libslic3r/PrintConfig.cpp:555
-#: src/libslic3r/PrintConfig.cpp:877 src/libslic3r/PrintConfig.cpp:1010
-#: src/libslic3r/PrintConfig.cpp:1418 src/libslic3r/PrintConfig.cpp:1764
-#: src/libslic3r/PrintConfig.cpp:1954 src/libslic3r/PrintConfig.cpp:2113
+#: src/slic3r/GUI/GUI_ObjectList.cpp:98 src/slic3r/GUI/GUI_ObjectList.cpp:657
+#: src/libslic3r/PrintConfig.cpp:483 src/libslic3r/PrintConfig.cpp:591
+#: src/libslic3r/PrintConfig.cpp:919 src/libslic3r/PrintConfig.cpp:1054
+#: src/libslic3r/PrintConfig.cpp:1526 src/libslic3r/PrintConfig.cpp:1872
+#: src/libslic3r/PrintConfig.cpp:2089 src/libslic3r/PrintConfig.cpp:2249
 msgid "Extrusion Width"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:626
-#: src/slic3r/GUI/Tab.cpp:1154 src/slic3r/GUI/Tab.cpp:1169
-#: src/slic3r/GUI/Tab.cpp:1269 src/slic3r/GUI/Tab.cpp:1272
-#: src/slic3r/GUI/Tab.cpp:1536 src/slic3r/GUI/Tab.cpp:2000
-#: src/slic3r/GUI/Tab.cpp:3730 src/libslic3r/PrintConfig.cpp:88
-#: src/libslic3r/PrintConfig.cpp:119 src/libslic3r/PrintConfig.cpp:223
-#: src/libslic3r/PrintConfig.cpp:1037 src/libslic3r/PrintConfig.cpp:2283
-#: src/libslic3r/PrintConfig.cpp:2455
+#: src/slic3r/GUI/GUI_ObjectList.cpp:102 src/slic3r/GUI/GUI_ObjectList.cpp:661
+#: src/slic3r/GUI/Tab.cpp:1409 src/slic3r/GUI/Tab.cpp:1430
+#: src/slic3r/GUI/Tab.cpp:1531 src/slic3r/GUI/Tab.cpp:1534
+#: src/slic3r/GUI/Tab.cpp:1816 src/slic3r/GUI/Tab.cpp:2152
+#: src/slic3r/GUI/Tab.cpp:4080 src/libslic3r/PrintConfig.cpp:90
+#: src/libslic3r/PrintConfig.cpp:121 src/libslic3r/PrintConfig.cpp:257
+#: src/libslic3r/PrintConfig.cpp:1081 src/libslic3r/PrintConfig.cpp:2419
+#: src/libslic3r/PrintConfig.cpp:2591
 msgid "Advanced"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/GUI_ObjectList.cpp:628
-#: src/slic3r/GUI/Plater.cpp:502 src/slic3r/GUI/Tab.cpp:3671
-#: src/slic3r/GUI/Tab.cpp:3672 src/libslic3r/PrintConfig.cpp:2621
-#: src/libslic3r/PrintConfig.cpp:2628 src/libslic3r/PrintConfig.cpp:2637
-#: src/libslic3r/PrintConfig.cpp:2646 src/libslic3r/PrintConfig.cpp:2656
-#: src/libslic3r/PrintConfig.cpp:2692 src/libslic3r/PrintConfig.cpp:2699
-#: src/libslic3r/PrintConfig.cpp:2710 src/libslic3r/PrintConfig.cpp:2720
-#: src/libslic3r/PrintConfig.cpp:2729 src/libslic3r/PrintConfig.cpp:2742
-#: src/libslic3r/PrintConfig.cpp:2752 src/libslic3r/PrintConfig.cpp:2761
-#: src/libslic3r/PrintConfig.cpp:2771 src/libslic3r/PrintConfig.cpp:2782
-#: src/libslic3r/PrintConfig.cpp:2790
+#: src/slic3r/GUI/GUI_ObjectList.cpp:104 src/slic3r/GUI/GUI_ObjectList.cpp:663
+#: src/slic3r/GUI/Plater.cpp:361 src/slic3r/GUI/Tab.cpp:4014
+#: src/slic3r/GUI/Tab.cpp:4015 src/libslic3r/PrintConfig.cpp:2757
+#: src/libslic3r/PrintConfig.cpp:2764 src/libslic3r/PrintConfig.cpp:2773
+#: src/libslic3r/PrintConfig.cpp:2782 src/libslic3r/PrintConfig.cpp:2792
+#: src/libslic3r/PrintConfig.cpp:2802 src/libslic3r/PrintConfig.cpp:2839
+#: src/libslic3r/PrintConfig.cpp:2846 src/libslic3r/PrintConfig.cpp:2857
+#: src/libslic3r/PrintConfig.cpp:2867 src/libslic3r/PrintConfig.cpp:2876
+#: src/libslic3r/PrintConfig.cpp:2889 src/libslic3r/PrintConfig.cpp:2899
+#: src/libslic3r/PrintConfig.cpp:2908 src/libslic3r/PrintConfig.cpp:2918
+#: src/libslic3r/PrintConfig.cpp:2929 src/libslic3r/PrintConfig.cpp:2937
 msgid "Supports"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:107 src/slic3r/GUI/GUI_ObjectList.cpp:629
-#: src/slic3r/GUI/Plater.cpp:642 src/slic3r/GUI/Tab.cpp:3705
-#: src/slic3r/GUI/Tab.cpp:3706 src/libslic3r/PrintConfig.cpp:2798
-#: src/libslic3r/PrintConfig.cpp:2805 src/libslic3r/PrintConfig.cpp:2819
-#: src/libslic3r/PrintConfig.cpp:2830 src/libslic3r/PrintConfig.cpp:2840
-#: src/libslic3r/PrintConfig.cpp:2862 src/libslic3r/PrintConfig.cpp:2873
-#: src/libslic3r/PrintConfig.cpp:2880 src/libslic3r/PrintConfig.cpp:2887
-#: src/libslic3r/PrintConfig.cpp:2898 src/libslic3r/PrintConfig.cpp:2907
-#: src/libslic3r/PrintConfig.cpp:2916
+#: src/slic3r/GUI/GUI_ObjectList.cpp:105 src/slic3r/GUI/GUI_ObjectList.cpp:664
+#: src/slic3r/GUI/Plater.cpp:501 src/slic3r/GUI/Tab.cpp:4055
+#: src/slic3r/GUI/Tab.cpp:4056 src/slic3r/GUI/Tab.cpp:4127
+#: src/libslic3r/PrintConfig.cpp:2945 src/libslic3r/PrintConfig.cpp:2952
+#: src/libslic3r/PrintConfig.cpp:2966 src/libslic3r/PrintConfig.cpp:2977
+#: src/libslic3r/PrintConfig.cpp:2987 src/libslic3r/PrintConfig.cpp:3009
+#: src/libslic3r/PrintConfig.cpp:3020 src/libslic3r/PrintConfig.cpp:3027
+#: src/libslic3r/PrintConfig.cpp:3034 src/libslic3r/PrintConfig.cpp:3045
+#: src/libslic3r/PrintConfig.cpp:3054 src/libslic3r/PrintConfig.cpp:3063
 msgid "Pad"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:108 src/slic3r/GUI/Tab.cpp:3723
-#: src/slic3r/GUI/Tab.cpp:3724 src/libslic3r/SLA/Hollowing.cpp:46
-#: src/libslic3r/SLA/Hollowing.cpp:58 src/libslic3r/SLA/Hollowing.cpp:67
-#: src/libslic3r/SLA/Hollowing.cpp:76 src/libslic3r/PrintConfig.cpp:2926
-#: src/libslic3r/PrintConfig.cpp:2933 src/libslic3r/PrintConfig.cpp:2943
-#: src/libslic3r/PrintConfig.cpp:2952
+#: src/slic3r/GUI/GUI_ObjectList.cpp:106 src/slic3r/GUI/Tab.cpp:4073
+#: src/slic3r/GUI/Tab.cpp:4074 src/libslic3r/SLA/Hollowing.cpp:45
+#: src/libslic3r/SLA/Hollowing.cpp:57 src/libslic3r/SLA/Hollowing.cpp:66
+#: src/libslic3r/SLA/Hollowing.cpp:75 src/libslic3r/PrintConfig.cpp:3073
+#: src/libslic3r/PrintConfig.cpp:3080 src/libslic3r/PrintConfig.cpp:3090
+#: src/libslic3r/PrintConfig.cpp:3099
 msgid "Hollowing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:282
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153
+#: src/slic3r/GUI/GUI_ObjectList.cpp:284
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161
 msgid "Name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:290 src/slic3r/GUI/Tab.cpp:1500
-#: src/slic3r/GUI/wxExtensions.cpp:598 src/libslic3r/PrintConfig.cpp:487
-msgid "Extruder"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:294 src/slic3r/GUI/GUI_ObjectList.cpp:407
+#: src/slic3r/GUI/GUI_ObjectList.cpp:300 src/slic3r/GUI/GUI_ObjectList.cpp:441
 msgid "Editing"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:352
+#: src/slic3r/GUI/GUI_ObjectList.cpp:386
 #, possible-c-format
 msgid "Auto-repaired (%d errors):"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:359
+#: src/slic3r/GUI/GUI_ObjectList.cpp:393
 msgid "degenerate facets"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:360
+#: src/slic3r/GUI/GUI_ObjectList.cpp:394
 msgid "edges fixed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:361
+#: src/slic3r/GUI/GUI_ObjectList.cpp:395
 msgid "facets removed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:362
+#: src/slic3r/GUI/GUI_ObjectList.cpp:396
 msgid "facets added"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:363
+#: src/slic3r/GUI/GUI_ObjectList.cpp:397
 msgid "facets reversed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:364
+#: src/slic3r/GUI/GUI_ObjectList.cpp:398
 msgid "backwards edges"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:372
+#: src/slic3r/GUI/GUI_ObjectList.cpp:406
 msgid "Right button click the icon to fix STL through Netfabb"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:409
+#: src/slic3r/GUI/GUI_ObjectList.cpp:443
 msgid "Right button click the icon to change the object settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:411
+#: src/slic3r/GUI/GUI_ObjectList.cpp:445
 msgid "Click the icon to change the object settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:415
+#: src/slic3r/GUI/GUI_ObjectList.cpp:449
 msgid "Right button click the icon to change the object printable property"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:417
+#: src/slic3r/GUI/GUI_ObjectList.cpp:451
 msgid "Click the icon to change the object printable property"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:462 src/slic3r/GUI/GUI_ObjectList.cpp:474
-#: src/slic3r/GUI/GUI_ObjectList.cpp:931 src/slic3r/GUI/GUI_ObjectList.cpp:4051
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4061
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4096
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:202
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:259
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:284
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:492
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:1755
-msgid "default"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:540
+#: src/slic3r/GUI/GUI_ObjectList.cpp:574
 msgid "Change Extruder"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:555
+#: src/slic3r/GUI/GUI_ObjectList.cpp:589
 msgid "Rename Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:555
+#: src/slic3r/GUI/GUI_ObjectList.cpp:589
 msgid "Rename Sub-object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1105
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3865
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1215
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4244
 msgid "Instances to Separated Objects"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1120
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1230
 msgid "Volumes in Object reordered"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1120
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1230
 msgid "Object reordered"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1196
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1544
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1550
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1863
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1306
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1661
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1667
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2008
 #, possible-c-format
 msgid "Quick Add Settings (%s)"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1279
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1396
 msgid "Select showing settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1328
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1445
 msgid "Add Settings for Layers"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1329
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1446
 msgid "Add Settings for Sub-object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1330
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1447
 msgid "Add Settings for Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1400
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1517
 msgid "Add Settings Bundle for Height range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1401
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1518
 msgid "Add Settings Bundle for Sub-object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1402
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1519
 msgid "Add Settings Bundle for Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1441
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1558
 msgid "Load"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1446
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1478
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1482
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1595
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1599
 msgid "Box"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1446
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
 msgid "Cylinder"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1446
-msgid "Sphere"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1446
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1563
 msgid "Slab"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1514
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1631
 msgid "Height range Modifier"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1523
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1640
 msgid "Add settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1603
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1718
 msgid "Change type"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1613
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1625
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1728
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1740
 msgid "Set as a Separated Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1625
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1740
 msgid "Set as a Separated Objects"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1635
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1750
 msgid "Printable"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1650
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1765
 msgid "Rename"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1661
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1776
 msgid "Fix through the Netfabb"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1671 src/slic3r/GUI/Plater.cpp:3970
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1786 src/slic3r/GUI/Plater.cpp:3884
 msgid "Export as STL"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1678
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4040 src/slic3r/GUI/Plater.cpp:3938
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1793
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4439 src/slic3r/GUI/Plater.cpp:3852
 msgid "Reload the selected volumes from disk"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1685
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1800
 msgid "Set extruder for selected items"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1738
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1832 src/libslic3r/PrintConfig.cpp:369
+msgid "Default"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1852
 msgid "Scale to print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1738
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1852
 msgid "Scale the selected object to fit the print volume"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1807
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2065
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1858 src/slic3r/GUI/Plater.cpp:4886
+msgid "Convert from imperial units"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1861 src/slic3r/GUI/Plater.cpp:4886
+msgid "Revert conversion from imperial units"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1868
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1876
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2569 src/libslic3r/PrintConfig.cpp:3641
+msgid "Merge"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1868
+msgid "Merge objects to the one multipart object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1876
+msgid "Merge objects to the one single object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1953
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2210
 msgid "Add Shape"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1893
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2038
 msgid "Load Part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:1932
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2077
 msgid "Error!"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2007
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2152
 msgid "Add Generic Subobject"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2036
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2181
 msgid "Generic"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2154
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2256
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2307
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2408
 msgid "Last instance of an object cannot be deleted."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2166
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2319
 msgid "Delete Settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2190
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2341
 msgid "Delete All Instances from Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2206
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2357
 msgid "Delete Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2237
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2389
 msgid "From Object List You can't delete the last solid part from object."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2241
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2393
 msgid "Delete Subobject"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2260
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2412
 msgid "Delete Instance"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2284 src/slic3r/GUI/Plater.cpp:2978
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2436 src/slic3r/GUI/Plater.cpp:2771
 msgid ""
 "The selected object couldn't be split because it contains only one part."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2288
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2440
 msgid "Split to Parts"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2342
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2576
+msgid "Merged"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2660
+msgid "Merge all parts to the one single object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2692
 msgid "Add Layers"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2468
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2846
 msgid "Group manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2480
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2858
 msgid "Object manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2493
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2871
 msgid "Object Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2497
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2875
 msgid "Part Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2502
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2880
 msgid "Layer range Settings to modify"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2508
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2886
 msgid "Part manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2514
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2892
 msgid "Instance manipulation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2521
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2899
 msgid "Height ranges"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2521
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2899
 msgid "Settings for height range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2707
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3083
 msgid "Delete Selected Item"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2844
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3221
 msgid "Delete Selected"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2920
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2948
-#: src/slic3r/GUI/GUI_ObjectList.cpp:2968
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3297
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3325
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3345
 msgid "Add Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3014
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3391
 msgid ""
 "Cannot insert a new layer range after the current layer range.\n"
 "The next layer range is too thin to be split to two\n"
 "without violating the minimum layer height."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3018
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3395
 msgid ""
 "Cannot insert a new layer range between the current and the next layer "
 "range.\n"
@@ -2630,206 +3155,208 @@ msgid ""
 "is thinner than the minimum layer height allowed."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3023
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3400
 msgid ""
 "Cannot insert a new layer range after the current layer range.\n"
 "Current layer range overlaps with the next layer range."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3082
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3459
 msgid "Edit Height Range"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3375
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3754
 msgid "Selection-Remove from list"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3383
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3762
 msgid "Selection-Add from list"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3501
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3880
 msgid "Object or Instance"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3502
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3635
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3881
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
 msgid "Part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3502
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3881
 msgid "Layer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3504
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3883
 msgid "Unsupported selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3505
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3884
 #, possible-c-format
 msgid "You started your selection with %s Item."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3506
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3885
 #, possible-c-format
 msgid "In this mode you can select only other %s Items%s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3509
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3888
 msgid "of a current Object"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3514
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3589 src/slic3r/GUI/Plater.cpp:143
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3893
+#: src/slic3r/GUI/GUI_ObjectList.cpp:3968 src/slic3r/GUI/Plater.cpp:147
 msgid "Info"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3630
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4009
 msgid "You can't change a type of the last solid part of the object."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3635
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
 msgid "Modifier"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3635
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
 msgid "Support Enforcer"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3635
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4014
 msgid "Support Blocker"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3637
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4016
 msgid "Select type of part"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3642
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4021
 msgid "Change Part Type"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3887
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4266
 msgid "Enter new name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3887
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4266
 msgid "Renaming"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3903
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4010 src/slic3r/GUI/Tab.cpp:3529
-#: src/slic3r/GUI/Tab.cpp:3533
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4282
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4409
+#: src/slic3r/GUI/SavePresetDialog.cpp:116
+#: src/slic3r/GUI/SavePresetDialog.cpp:124
 msgid "The supplied name is not valid;"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:3904
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4011 src/slic3r/GUI/Tab.cpp:3530
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4283
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4410
+#: src/slic3r/GUI/SavePresetDialog.cpp:117
 msgid "the following characters are not allowed:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4055
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4458
 msgid "Select extruder number:"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4056
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4459
 msgid "This extruder will be set for selected items"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4081
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4484
 msgid "Change Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4178 src/slic3r/GUI/Selection.cpp:1481
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1513
 msgid "Set Printable"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectList.cpp:4178 src/slic3r/GUI/Selection.cpp:1481
+#: src/slic3r/GUI/GUI_ObjectList.cpp:4581 src/slic3r/GUI/Selection.cpp:1513
 msgid "Set Unprintable"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:62
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:105
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:68
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:111
 msgid "World coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:63
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:106
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:69
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:112
 msgid "Local coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:82
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:88
 msgid "Select coordinate space, in which the transformation will be performed."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:155 src/libslic3r/GCode.cpp:638
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:623
 msgid "Object name"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:215
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:457
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:223
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:505
 msgid "Position"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:216
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:458
-#: src/slic3r/GUI/Mouse3DController.cpp:295
-#: src/slic3r/GUI/Mouse3DController.cpp:318
-msgid "Rotation"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:263
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:271
 #, possible-c-format
 msgid "Toggle %c axis mirroring"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:297
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305
 msgid "Set Mirror"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:337
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:349
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:486
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
+msgid "in"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357
 msgid "Drop to bed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:363
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:372
 msgid "Reset rotation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:385
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:394
 msgid "Reset Rotation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:397
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:399
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:407
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409
 msgid "Reset scale"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:459
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507
 msgid "Scale factors"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:516
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:561
 msgid "Translate"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:578
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:625
 msgid ""
 "You cannot use non-uniform scaling mode for multiple objects/parts selection"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:750
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:797
 msgid "Set Position"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:781
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:828
 msgid "Set Orientation"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:846
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:893
 msgid "Set Scale"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:875
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:925
 msgid ""
 "The currently manipulated object is tilted (rotation angles are not "
 "multiples of 90°).\n"
@@ -2838,1122 +3365,1312 @@ msgid ""
 "once the rotation is embedded into the object coordinates."
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:878
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:928
 msgid ""
 "This operation is irreversible.\n"
 "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:59
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:62
 msgid "Additional Settings"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:95
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:98
 msgid "Remove parameter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:101
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:104
 #, possible-c-format
 msgid "Delete Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_ObjectSettings.cpp:152
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:157
 #, possible-c-format
 msgid "Change Option %s"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:277
+#: src/slic3r/GUI/GUI_Preview.cpp:265 src/slic3r/GUI/GUI_Preview.cpp:271
 msgid "View"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:280 src/slic3r/GUI/GUI_Preview.cpp:641
-#: src/libslic3r/GCode/PreviewData.cpp:346
-msgid "Feature type"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:281 src/libslic3r/PrintConfig.cpp:500
+#: src/slic3r/GUI/GUI_Preview.cpp:276 src/libslic3r/PrintConfig.cpp:536
 msgid "Height"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:282 src/libslic3r/PrintConfig.cpp:2245
+#: src/slic3r/GUI/GUI_Preview.cpp:277 src/libslic3r/PrintConfig.cpp:2381
 msgid "Width"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:284 src/slic3r/GUI/Tab.cpp:1523
+#: src/slic3r/GUI/GUI_Preview.cpp:279 src/slic3r/GUI/Tab.cpp:1803
 msgid "Fan speed"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:285
+#: src/slic3r/GUI/GUI_Preview.cpp:280
 msgid "Volumetric flow rate"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:286 src/slic3r/GUI/GUI_Preview.cpp:401
-#: src/slic3r/GUI/GUI_Preview.cpp:585 src/slic3r/GUI/GUI_Preview.cpp:640
-#: src/slic3r/GUI/GUI_Preview.cpp:901 src/libslic3r/GCode/PreviewData.cpp:358
-msgid "Tool"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:287 src/slic3r/GUI/GUI_Preview.cpp:638
-#: src/libslic3r/GCode/PreviewData.cpp:360
-msgid "Color Print"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:290
+#: src/slic3r/GUI/GUI_Preview.cpp:286 src/slic3r/GUI/GUI_Preview.cpp:288
 msgid "Show"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:293 src/slic3r/GUI/GUI_Preview.cpp:294
+#: src/slic3r/GUI/GUI_Preview.cpp:293 src/slic3r/GUI/GUI_Preview.cpp:295
+#: src/slic3r/GUI/GUI_Preview.cpp:316
 msgid "Feature types"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:296 src/libslic3r/ExtrusionEntity.cpp:310
+#: src/slic3r/GUI/GUI_Preview.cpp:301 src/libslic3r/ExtrusionEntity.cpp:314
+#: src/libslic3r/ExtrusionEntity.cpp:336
 msgid "Perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:297 src/libslic3r/ExtrusionEntity.cpp:311
+#: src/slic3r/GUI/GUI_Preview.cpp:302 src/libslic3r/ExtrusionEntity.cpp:315
+#: src/libslic3r/ExtrusionEntity.cpp:338
 msgid "External perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:298 src/libslic3r/ExtrusionEntity.cpp:312
+#: src/slic3r/GUI/GUI_Preview.cpp:303 src/libslic3r/ExtrusionEntity.cpp:316
+#: src/libslic3r/ExtrusionEntity.cpp:340
 msgid "Overhang perimeter"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:299 src/libslic3r/ExtrusionEntity.cpp:313
+#: src/slic3r/GUI/GUI_Preview.cpp:304 src/libslic3r/ExtrusionEntity.cpp:317
+#: src/libslic3r/ExtrusionEntity.cpp:342
 msgid "Internal infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:300 src/libslic3r/ExtrusionEntity.cpp:314
-#: src/libslic3r/PrintConfig.cpp:1763 src/libslic3r/PrintConfig.cpp:1774
+#: src/slic3r/GUI/GUI_Preview.cpp:305 src/libslic3r/ExtrusionEntity.cpp:318
+#: src/libslic3r/ExtrusionEntity.cpp:344 src/libslic3r/PrintConfig.cpp:1871
+#: src/libslic3r/PrintConfig.cpp:1882
 msgid "Solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:301 src/libslic3r/ExtrusionEntity.cpp:315
-#: src/libslic3r/PrintConfig.cpp:2112 src/libslic3r/PrintConfig.cpp:2124
+#: src/slic3r/GUI/GUI_Preview.cpp:306 src/libslic3r/ExtrusionEntity.cpp:319
+#: src/libslic3r/ExtrusionEntity.cpp:346 src/libslic3r/PrintConfig.cpp:2248
+#: src/libslic3r/PrintConfig.cpp:2260
 msgid "Top solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:302 src/libslic3r/ExtrusionEntity.cpp:316
+#: src/slic3r/GUI/GUI_Preview.cpp:308 src/libslic3r/ExtrusionEntity.cpp:321
+#: src/libslic3r/ExtrusionEntity.cpp:350
 msgid "Bridge infill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:303 src/libslic3r/ExtrusionEntity.cpp:317
-#: src/libslic3r/PrintConfig.cpp:918
+#: src/slic3r/GUI/GUI_Preview.cpp:309 src/libslic3r/ExtrusionEntity.cpp:322
+#: src/libslic3r/ExtrusionEntity.cpp:352 src/libslic3r/PrintConfig.cpp:962
 msgid "Gap fill"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:304 src/slic3r/GUI/Tab.cpp:1178
-#: src/libslic3r/ExtrusionEntity.cpp:318
+#: src/slic3r/GUI/GUI_Preview.cpp:310 src/slic3r/GUI/Tab.cpp:1439
+#: src/libslic3r/ExtrusionEntity.cpp:323 src/libslic3r/ExtrusionEntity.cpp:354
 msgid "Skirt"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:306 src/libslic3r/ExtrusionEntity.cpp:320
-#: src/libslic3r/PrintConfig.cpp:1998
+#: src/slic3r/GUI/GUI_Preview.cpp:312 src/libslic3r/ExtrusionEntity.cpp:325
+#: src/libslic3r/ExtrusionEntity.cpp:358 src/libslic3r/PrintConfig.cpp:2133
 msgid "Support material interface"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:307 src/slic3r/GUI/Tab.cpp:1259
-#: src/libslic3r/ExtrusionEntity.cpp:321
+#: src/slic3r/GUI/GUI_Preview.cpp:313 src/slic3r/GUI/Tab.cpp:1521
+#: src/libslic3r/ExtrusionEntity.cpp:326 src/libslic3r/ExtrusionEntity.cpp:360
 msgid "Wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:312 src/libslic3r/PrintConfig.cpp:2159
-msgid "Travel"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:313
-msgid "Retractions"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:314
-msgid "Unretractions"
-msgstr ""
-
-#: src/slic3r/GUI/GUI_Preview.cpp:315
+#: src/slic3r/GUI/GUI_Preview.cpp:338 src/slic3r/GUI/GUI_Preview.cpp:1478
 msgid "Shells"
 msgstr ""
 
-#: src/slic3r/GUI/GUI_Preview.cpp:316
+#: src/slic3r/GUI/GUI_Preview.cpp:339
 msgid "Legend"
 msgstr ""
 
-#: src/slic3r/GUI/Job.hpp:123
+#: src/slic3r/GUI/GUI_Preview.cpp:1479
+msgid "Tool marker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:1480
+msgid "Legend/Estimated printing time"
+msgstr ""
+
+#: src/slic3r/GUI/ImGuiWrapper.cpp:800 src/slic3r/GUI/Search.cpp:464
+msgid "Use for search"
+msgstr ""
+
+#: src/slic3r/GUI/ImGuiWrapper.cpp:801 src/slic3r/GUI/Search.cpp:458
+msgid "Category"
+msgstr ""
+
+#: src/slic3r/GUI/ImGuiWrapper.cpp:803 src/slic3r/GUI/Search.cpp:460
+msgid "Search in English"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:149
+msgid "Arranging"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:176
+msgid "Could not arrange model objects! Some geometries may be invalid."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:182
+msgid "Arranging canceled."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:183
+msgid "Arranging done."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/Job.cpp:74
 msgid "ERROR: not enough resources to execute a new job."
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:41 src/slic3r/GUI/MainFrame.cpp:855
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41
+msgid "Searching for optimal orientation"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73
+msgid "Orientation search canceled."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74
+msgid "Orientation found."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:35
+msgid "Choose SLA archive:"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:39
+msgid "Import file: "
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:46
+msgid "Import model and profile"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:47
+msgid "Import profile only"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:48
+msgid "Import model only"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:56
+msgid "Quality: "
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:59
+msgid "Accurate"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:60
+msgid "Balanced"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:61
+msgid "Quick"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:135
+msgid "Importing SLA archive"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:159
+msgid "Importing canceled."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:160
+msgid "Importing done."
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:208 src/slic3r/GUI/Plater.cpp:2254
+msgid "You cannot load SLA project with a multi-part object on the bed"
+msgstr ""
+
+#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2255
+#: src/slic3r/GUI/Tab.cpp:3188
+msgid "Please check your object list before preset changing."
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:37
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:39 src/slic3r/GUI/MainFrame.cpp:941
+#: src/slic3r/GUI/MainFrame.cpp:1332
 msgid "Keyboard Shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
 msgid "New project, clear plater"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
 msgid "Open project STL/OBJ/AMF/3MF with config, clear plater"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
 msgid "Save project (3mf)"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:115
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108
 msgid "Save project as (3mf)"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
 msgid "(Re)slice"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
 msgid "Import STL/OBJ/AMF/3MF without config, keep plater"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:112
 msgid "Import Config from ini/amf/3mf/gcode"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:113
 msgid "Load Config from ini/amf/3mf/gcode and merge"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:122 src/slic3r/GUI/Plater.cpp:898
-#: src/slic3r/GUI/Plater.cpp:5531 src/libslic3r/PrintConfig.cpp:3375
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:115 src/slic3r/GUI/Plater.cpp:766
+#: src/slic3r/GUI/Plater.cpp:5706 src/libslic3r/PrintConfig.cpp:3546
 msgid "Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:123 src/slic3r/GUI/Plater.cpp:5532
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:116 src/slic3r/GUI/Plater.cpp:5707
 msgid "Send G-code"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
 msgid "Export config"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:125 src/slic3r/GUI/Plater.cpp:887
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:118 src/slic3r/GUI/Plater.cpp:755
 msgid "Export to SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
 msgid "Eject SD card / Flash drive"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:121
 msgid "Select all objects"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
 msgid "Deselect all"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
 msgid "Delete selected"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
 msgid "Copy to clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
 msgid "Paste from clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
 msgid "Reload plater from disk"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:132
 msgid "Select Plater Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:133
 msgid "Select Print Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:134
 msgid "Select Filament Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
 msgid "Select Printer Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
 msgid "Switch to 3D"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
 msgid "Switch to Preview"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
 #: src/slic3r/GUI/PrintHostDialogs.cpp:136
 msgid "Print host upload queue"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
 msgid "Camera view"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
 msgid "Show/Hide object/instance labels"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
-msgid "Turn On/Off facets' slope rendering"
-msgstr ""
-
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:152 src/slic3r/GUI/Preferences.cpp:10
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:143 src/slic3r/GUI/Preferences.cpp:12
 msgid "Preferences"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
 msgid "Show keyboard shortcuts list"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
 msgid "Commands"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
 msgid "Add Instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
 msgid "Remove Instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:155
 msgid ""
 "Press to select multiple objects\n"
 "or move multiple objects with mouse"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
 msgid "Press to activate selection rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:157
 msgid "Press to activate deselection rectangle"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:209
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
 msgid "Arrow Up"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:158
 msgid "Move selection 10 mm in positive Y direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:210
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:206
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:216
 msgid "Arrow Down"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:159
 msgid "Move selection 10 mm in negative Y direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
 msgid "Arrow Left"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:160
 msgid "Move selection 10 mm in negative X direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
 msgid "Arrow Right"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:161
 msgid "Move selection 10 mm in positive X direction"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
 msgid "Any arrow"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:162
 msgid "Movement step set to 1 mm"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:163
 msgid "Movement in camera space"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
 msgid "Page Up"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:164
 msgid "Rotate selection 45 degrees CCW"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
 msgid "Page Down"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:165
 msgid "Rotate selection 45 degrees CW"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:166
 msgid "Gizmo move"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:167
 msgid "Gizmo scale"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:168
 msgid "Gizmo rotate"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:178
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:169
 msgid "Gizmo cut"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:170
 msgid "Gizmo Place face on bed"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
 msgid "Gizmo SLA hollow"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:181
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
 msgid "Gizmo SLA support points"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
 msgid "Unselect gizmo or clear selection"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
 msgid "Change camera type (perspective, orthographic)"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:175
 msgid "Zoom to Bed"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
 msgid ""
 "Zoom to selected object\n"
 "or all objects in scene, if none selected"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:177
 msgid "Zoom in"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:178
 msgid "Zoom out"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:179
+msgid "Switch between Editor/Preview"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:180
+msgid "Collapse/Expand the sidebar"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
 msgid "Show/Hide 3Dconnexion devices settings dialog"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:197 src/slic3r/GUI/MainFrame.cpp:311
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:190 src/slic3r/GUI/MainFrame.cpp:340
+#: src/slic3r/GUI/MainFrame.cpp:352
 msgid "Plater"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:200
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:193
 #, possible-c-format
 msgid ""
 "Press to snap by 5% in Gizmo scale\n"
 "or to snap by 1mm in Gizmo move"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:201
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:194
 msgid ""
 "Scale selection to fit print volume\n"
 "in Gizmo scale"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:202
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:195
 msgid "Press to activate one direction scaling in Gizmo scale"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:203
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
 msgid ""
 "Press to scale (in Gizmo scale) or rotate (in Gizmo rotate)\n"
 "selected objects around their own center"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:206
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
 msgid "Gizmos"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:209
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:211
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:205
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
 msgid "Upper Layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:210
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:212
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:206
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:208
 msgid "Lower Layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:213
-msgid "Show/Hide Legend"
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:209
+msgid "Show/Hide Legend/Estimated printing time"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:216 src/slic3r/GUI/Plater.cpp:4129
-#: src/slic3r/GUI/Tab.cpp:2385
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:212 src/slic3r/GUI/Plater.cpp:4052
+#: src/slic3r/GUI/Tab.cpp:2559
 msgid "Preview"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:215
 msgid "Move current slider thumb Up"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:216
 msgid "Move current slider thumb Down"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:217
 msgid "Set upper thumb to current slider thumb"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:218
 msgid "Set lower thumb to current slider thumb"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
 msgid "Add color change marker for current layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
 msgid "Delete color change marker for current layer"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:232
+msgid ""
+"Press to speed up 5 times while moving thumb\n"
+"with arrow keys or mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:225
 msgid "Layers Slider"
 msgstr ""
 
-#: src/slic3r/GUI/KBShortcutsDialog.cpp:250
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
+msgid "Move current slider thumb Left"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
+msgid "Move current slider thumb Right"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:235
+msgid "Sequential Slider"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:259
 msgid "Keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:72
+#: src/slic3r/GUI/MainFrame.cpp:63 src/slic3r/GUI/MainFrame.cpp:1262
+msgid "Open new instance"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:63 src/slic3r/GUI/MainFrame.cpp:77
+#: src/slic3r/GUI/MainFrame.cpp:1262
+msgid "Open a new PrusaSlicer instance"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:79
+msgid "G-code preview"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:66 src/slic3r/GUI/MainFrame.cpp:1141
+msgid "Open G-code viewer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:77 src/slic3r/GUI/MainFrame.cpp:1398
+msgid "Open PrusaSlicer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:79
+msgid "Open new G-code viewer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:166
 msgid ""
-" - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/"
+" - Remember to check for updates at https://github.com/prusa3d/PrusaSlicer/"
 "releases"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:281
+#: src/slic3r/GUI/MainFrame.cpp:535 src/slic3r/GUI/MainFrame.cpp:537
 msgid "based on Slic3r"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:533
-msgid "&New Project"
+#: src/slic3r/GUI/MainFrame.cpp:909 src/slic3r/GUI/MainFrame.cpp:1308
+msgid "Prusa 3D &Drivers"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:533
-msgid "Start a new project"
+#: src/slic3r/GUI/MainFrame.cpp:909 src/slic3r/GUI/MainFrame.cpp:1308
+msgid "Open the Prusa3D drivers download page in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:536
-msgid "&Open Project"
+#: src/slic3r/GUI/MainFrame.cpp:911 src/slic3r/GUI/MainFrame.cpp:1310
+msgid "Software &Releases"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:536
-msgid "Open a project file"
+#: src/slic3r/GUI/MainFrame.cpp:911 src/slic3r/GUI/MainFrame.cpp:1310
+msgid "Open the software releases page in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:541
-msgid "Recent projects"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:550
-msgid ""
-"The selected project is no longer available.\n"
-"Do you want to remove it from the recent projects list?"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:550 src/slic3r/GUI/MainFrame.cpp:932
-#: src/slic3r/GUI/PrintHostDialogs.cpp:231
-msgid "Error"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:575
-msgid "&Save Project"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:575
-msgid "Save current project file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:579 src/slic3r/GUI/MainFrame.cpp:581
-msgid "Save Project &as"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:579 src/slic3r/GUI/MainFrame.cpp:581
-msgid "Save current project file as"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:589
-msgid "Import STL/OBJ/AM&F/3MF"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:589
-msgid "Load a model"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:593
-msgid "Import &Config"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:593
-msgid "Load exported configuration file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:596
-msgid "Import Config from &project"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:596
-msgid "Load configuration from project file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:600
-msgid "Import Config &Bundle"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:600
-msgid "Load presets from a bundle"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:603
-msgid "&Import"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:606 src/slic3r/GUI/MainFrame.cpp:896
-msgid "Export &G-code"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:606
-msgid "Export current plate as G-code"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:610 src/slic3r/GUI/MainFrame.cpp:897
-msgid "S&end G-code"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:610
-msgid "Send to print current plate as G-code"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:614
-msgid "Export G-code to SD card / Flash drive"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:614
-msgid "Export current plate as G-code to SD card / Flash drive"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:618
-msgid "Export plate as &STL"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:618
-msgid "Export current plate as STL"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:621
-msgid "Export plate as STL &including supports"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:621
-msgid "Export current plate as STL including supports"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:624
-msgid "Export plate as &AMF"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:624
-msgid "Export current plate as AMF"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:628
-msgid "Export &toolpaths as OBJ"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:628
-msgid "Export toolpaths as OBJ"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:632
-msgid "Export &Config"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:632
-msgid "Export current configuration to file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:635
-msgid "Export Config &Bundle"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:635
-msgid "Export all presets to file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:638
-msgid "&Export"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:640
-msgid "Ejec&t SD card / Flash drive"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:640
-msgid "Eject SD card / Flash drive after the G-code was exported to it."
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:648
-msgid "Quick Slice"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:648
-msgid "Slice a file into a G-code"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:654
-msgid "Quick Slice and Save As"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:654
-msgid "Slice a file into a G-code, save as"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:660
-msgid "Repeat Last Quick Slice"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:660
-msgid "Repeat last quick slice"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:668
-msgid "(Re)Slice No&w"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:668
-msgid "Start new slicing process"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:672
-msgid "&Repair STL file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:672
-msgid "Automatically repair an STL file"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:676
-msgid "&Quit"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:676
+#: src/slic3r/GUI/MainFrame.cpp:917 src/slic3r/GUI/MainFrame.cpp:1316
 #, possible-c-format
-msgid "Quit %s"
+msgid "%s &Website"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:701
-msgid "&Select all"
+#: src/slic3r/GUI/MainFrame.cpp:918 src/slic3r/GUI/MainFrame.cpp:1317
+#, possible-c-format
+msgid "Open the %s website in your browser"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:702
-msgid "Selects all objects"
+#: src/slic3r/GUI/MainFrame.cpp:924 src/slic3r/GUI/MainFrame.cpp:1323
+msgid "System &Info"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:704
-msgid "D&eselect all"
+#: src/slic3r/GUI/MainFrame.cpp:924 src/slic3r/GUI/MainFrame.cpp:1323
+msgid "Show system information"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:705
-msgid "Deselects all objects"
+#: src/slic3r/GUI/MainFrame.cpp:926 src/slic3r/GUI/MainFrame.cpp:1325
+msgid "Show &Configuration Folder"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:708
-msgid "&Delete selected"
+#: src/slic3r/GUI/MainFrame.cpp:926 src/slic3r/GUI/MainFrame.cpp:1325
+msgid "Show user configuration folder (datadir)"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:709
-msgid "Deletes the current selection"
+#: src/slic3r/GUI/MainFrame.cpp:928 src/slic3r/GUI/MainFrame.cpp:1327
+msgid "Report an I&ssue"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:711
-msgid "Delete &all"
+#: src/slic3r/GUI/MainFrame.cpp:928 src/slic3r/GUI/MainFrame.cpp:1327
+#, possible-c-format
+msgid "Report an issue on %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:712
-msgid "Deletes all objects"
+#: src/slic3r/GUI/MainFrame.cpp:933 src/slic3r/GUI/MainFrame.cpp:937
+#: src/slic3r/GUI/MainFrame.cpp:1329
+#, possible-c-format
+msgid "&About %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:716
-msgid "&Undo"
+#: src/slic3r/GUI/MainFrame.cpp:933 src/slic3r/GUI/MainFrame.cpp:937
+#: src/slic3r/GUI/MainFrame.cpp:1329
+msgid "Show about dialog"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:719
-msgid "&Redo"
+#: src/slic3r/GUI/MainFrame.cpp:941 src/slic3r/GUI/MainFrame.cpp:1332
+msgid "Show the list of the keyboard shortcuts"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:724
-msgid "&Copy"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:725
-msgid "Copy selection to clipboard"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:727
-msgid "&Paste"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:728
-msgid "Paste clipboard"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:732
-msgid "Re&load from disk"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:733
-msgid "Reload the plater from disk"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:742
-msgid "&Plater Tab"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:742
-msgid "Show the plater"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:750
-msgid "P&rint Settings Tab"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:750
-msgid "Show the print settings"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:753 src/slic3r/GUI/MainFrame.cpp:899
-msgid "&Filament Settings Tab"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:753
-msgid "Show the filament settings"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:757
-msgid "Print&er Settings Tab"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:757
-msgid "Show the printer settings"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:762
-msgid "3&D"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:762
-msgid "Show the 3D editing view"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:765
-msgid "Pre&view"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:765
-msgid "Show the 3D slices preview"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:784
-msgid "Print &Host Upload Queue"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:784
-msgid "Display the Print Host Upload Queue window"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:794
+#: src/slic3r/GUI/MainFrame.cpp:955 src/slic3r/GUI/MainFrame.cpp:1275
 msgid "Iso"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:794
+#: src/slic3r/GUI/MainFrame.cpp:955 src/slic3r/GUI/MainFrame.cpp:1275
 msgid "Iso View"
 msgstr ""
 
 #. TRN To be shown in the main menu View->Top
 #. TRN To be shown in Print Settings "Top solid layers"
-#: src/slic3r/GUI/MainFrame.cpp:798 src/libslic3r/PrintConfig.cpp:2139
-#: src/libslic3r/PrintConfig.cpp:2148
+#: src/slic3r/GUI/MainFrame.cpp:959 src/slic3r/GUI/MainFrame.cpp:1279
+#: src/libslic3r/PrintConfig.cpp:2275 src/libslic3r/PrintConfig.cpp:2284
 msgid "Top"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:798
+#: src/slic3r/GUI/MainFrame.cpp:959 src/slic3r/GUI/MainFrame.cpp:1279
 msgid "Top View"
 msgstr ""
 
 #. TRN To be shown in the main menu View->Bottom
 #. TRN To be shown in Print Settings "Bottom solid layers"
 #. TRN To be shown in Print Settings "Top solid layers"
-#: src/slic3r/GUI/MainFrame.cpp:801 src/libslic3r/PrintConfig.cpp:174
-#: src/libslic3r/PrintConfig.cpp:183
+#: src/slic3r/GUI/MainFrame.cpp:962 src/slic3r/GUI/MainFrame.cpp:1282
+#: src/libslic3r/PrintConfig.cpp:208 src/libslic3r/PrintConfig.cpp:217
 msgid "Bottom"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:801
+#: src/slic3r/GUI/MainFrame.cpp:962 src/slic3r/GUI/MainFrame.cpp:1282
 msgid "Bottom View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:803
+#: src/slic3r/GUI/MainFrame.cpp:964 src/slic3r/GUI/MainFrame.cpp:1284
 msgid "Front"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:803
+#: src/slic3r/GUI/MainFrame.cpp:964 src/slic3r/GUI/MainFrame.cpp:1284
 msgid "Front View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:805 src/libslic3r/PrintConfig.cpp:1632
+#: src/slic3r/GUI/MainFrame.cpp:966 src/slic3r/GUI/MainFrame.cpp:1286
+#: src/libslic3r/PrintConfig.cpp:1740
 msgid "Rear"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:805
+#: src/slic3r/GUI/MainFrame.cpp:966 src/slic3r/GUI/MainFrame.cpp:1286
 msgid "Rear View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:807
+#: src/slic3r/GUI/MainFrame.cpp:968 src/slic3r/GUI/MainFrame.cpp:1288
 msgid "Left"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:807
+#: src/slic3r/GUI/MainFrame.cpp:968 src/slic3r/GUI/MainFrame.cpp:1288
 msgid "Left View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:809
+#: src/slic3r/GUI/MainFrame.cpp:970 src/slic3r/GUI/MainFrame.cpp:1290
 msgid "Right"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:809
+#: src/slic3r/GUI/MainFrame.cpp:970 src/slic3r/GUI/MainFrame.cpp:1290
 msgid "Right View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:814 src/slic3r/GUI/MainFrame.cpp:822
+#: src/slic3r/GUI/MainFrame.cpp:986
+msgid "&New Project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:986
+msgid "Start a new project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:989
+msgid "&Open Project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:989
+msgid "Open a project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:994
+msgid "Recent projects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1003
+msgid ""
+"The selected project is no longer available.\n"
+"Do you want to remove it from the recent projects list?"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1003 src/slic3r/GUI/MainFrame.cpp:1486
+#: src/slic3r/GUI/PrintHostDialogs.cpp:231
+msgid "Error"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1028
+msgid "&Save Project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1028
+msgid "Save current project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1032 src/slic3r/GUI/MainFrame.cpp:1034
+msgid "Save Project &as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1032 src/slic3r/GUI/MainFrame.cpp:1034
+msgid "Save current project file as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1042
+msgid "Import STL/OBJ/AM&F/3MF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1042
+msgid "Load a model"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1046
+msgid "Import STL (imperial units)"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1046
+msgid "Load an model saved with imperial units"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1050
+msgid "Import SL1 archive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1050
+msgid "Load an SL1 output archive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1055
+msgid "Import &Config"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1055
+msgid "Load exported configuration file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1058
+msgid "Import Config from &project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1058
+msgid "Load configuration from project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1062
+msgid "Import Config &Bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1062
+msgid "Load presets from a bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1065
+msgid "&Import"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1068 src/slic3r/GUI/MainFrame.cpp:1448
+msgid "Export &G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1068
+msgid "Export current plate as G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1072 src/slic3r/GUI/MainFrame.cpp:1449
+msgid "S&end G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1072
+msgid "Send to print current plate as G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1076
+msgid "Export G-code to SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1076
+msgid "Export current plate as G-code to SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1080
+msgid "Export plate as &STL"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1080
+msgid "Export current plate as STL"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1083
+msgid "Export plate as STL &including supports"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1083
+msgid "Export current plate as STL including supports"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1086
+msgid "Export plate as &AMF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1086
+msgid "Export current plate as AMF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1090 src/slic3r/GUI/MainFrame.cpp:1395
+msgid "Export &toolpaths as OBJ"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1090 src/slic3r/GUI/MainFrame.cpp:1395
+msgid "Export toolpaths as OBJ"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1094
+msgid "Export &Config"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1094
+msgid "Export current configuration to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1097
+msgid "Export Config &Bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1097
+msgid "Export all presets to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1100
+msgid "Export Config Bundle With Physical Printers"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1100
+msgid "Export all presets including physical printers to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1103
+msgid "&Export"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1105
+msgid "Ejec&t SD card / Flash drive"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1105
+msgid "Eject SD card / Flash drive after the G-code was exported to it."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1113
+msgid "Quick Slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1113
+msgid "Slice a file into a G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1119
+msgid "Quick Slice and Save As"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1119
+msgid "Slice a file into a G-code, save as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1125
+msgid "Repeat Last Quick Slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1125
+msgid "Repeat last quick slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1133
+msgid "(Re)Slice No&w"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1133
+msgid "Start new slicing process"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1137
+msgid "&Repair STL file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1137
+msgid "Automatically repair an STL file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1141
+msgid "&G-code preview"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1144 src/slic3r/GUI/MainFrame.cpp:1402
+msgid "&Quit"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1144 src/slic3r/GUI/MainFrame.cpp:1402
+#, possible-c-format
+msgid "Quit %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1171
+msgid "&Select all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1172
+msgid "Selects all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1174
+msgid "D&eselect all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1175
+msgid "Deselects all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1178
+msgid "&Delete selected"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1179
+msgid "Deletes the current selection"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1181
+msgid "Delete &all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1182
+msgid "Deletes all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1186
+msgid "&Undo"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1189
+msgid "&Redo"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1194
+msgid "&Copy"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1195
+msgid "Copy selection to clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1197
+msgid "&Paste"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1198
+msgid "Paste clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1202
+msgid "Re&load from disk"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1203
+msgid "Reload the plater from disk"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1207
+msgid "Searc&h"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1208
+msgid "Find option"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1216
+msgid "&Plater Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1216
+msgid "Show the plater"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1221
+msgid "P&rint Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1221
+msgid "Show the print settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1224 src/slic3r/GUI/MainFrame.cpp:1451
+msgid "&Filament Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1224
+msgid "Show the filament settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1228
+msgid "Print&er Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1228
+msgid "Show the printer settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1234
+msgid "3&D"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1234
+msgid "Show the 3D editing view"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1237
+msgid "Pre&view"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1237
+msgid "Show the 3D slices preview"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1258
+msgid "Print &Host Upload Queue"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1258
+msgid "Display the Print Host Upload Queue window"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1294
 msgid "Show &labels"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:814 src/slic3r/GUI/MainFrame.cpp:822
+#: src/slic3r/GUI/MainFrame.cpp:1294
 msgid "Show object/instance labels in 3D scene"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:817
-msgid "Show &slope"
+#: src/slic3r/GUI/MainFrame.cpp:1297
+msgid "&Collapse sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:817
-msgid "Objects coloring using faces' slope"
+#: src/slic3r/GUI/MainFrame.cpp:1297 src/slic3r/GUI/Plater.cpp:2144
+msgid "Collapse sidebar"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:820
-msgid "&Options"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:831
-msgid "Prusa 3D &Drivers"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:831
-msgid "Open the Prusa3D drivers download page in your browser"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:833
-msgid "Software &Releases"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:833
-msgid "Open the software releases page in your browser"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:839
-#, possible-c-format
-msgid "%s &Website"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:840
-#, possible-c-format
-msgid "Open the %s website in your browser"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:846
-msgid "System &Info"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:846
-msgid "Show system information"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:848
-msgid "Show &Configuration Folder"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:848
-msgid "Show user configuration folder (datadir)"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:850
-msgid "Report an I&ssue"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:850
-#, possible-c-format
-msgid "Report an issue on %s"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:852
-#, possible-c-format
-msgid "&About %s"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:852
-msgid "Show about dialog"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:855
-msgid "Show the list of the keyboard shortcuts"
-msgstr ""
-
-#: src/slic3r/GUI/MainFrame.cpp:868
+#: src/slic3r/GUI/MainFrame.cpp:1347 src/slic3r/GUI/MainFrame.cpp:1357
+#: src/slic3r/GUI/MainFrame.cpp:1417
 msgid "&File"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:869
+#: src/slic3r/GUI/MainFrame.cpp:1348 src/slic3r/GUI/MainFrame.cpp:1358
 msgid "&Edit"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:870
+#: src/slic3r/GUI/MainFrame.cpp:1349 src/slic3r/GUI/MainFrame.cpp:1359
 msgid "&Window"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:871
+#: src/slic3r/GUI/MainFrame.cpp:1350 src/slic3r/GUI/MainFrame.cpp:1360
+#: src/slic3r/GUI/MainFrame.cpp:1418
 msgid "&View"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:874
+#: src/slic3r/GUI/MainFrame.cpp:1353 src/slic3r/GUI/MainFrame.cpp:1363
+#: src/slic3r/GUI/MainFrame.cpp:1423
 msgid "&Help"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:896
+#: src/slic3r/GUI/MainFrame.cpp:1391
+msgid "&Open G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1391
+msgid "Open a G-code file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1398
+msgid "Open &PrusaSlicer"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:1448
 msgid "E&xport"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:897
+#: src/slic3r/GUI/MainFrame.cpp:1449
 msgid "S&end to print"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:899
+#: src/slic3r/GUI/MainFrame.cpp:1451
 msgid "Mate&rial Settings Tab"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:920
+#: src/slic3r/GUI/MainFrame.cpp:1474
 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:931
+#: src/slic3r/GUI/MainFrame.cpp:1485
 msgid "No previously sliced file."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:937
+#: src/slic3r/GUI/MainFrame.cpp:1491
 msgid "Previously sliced file ("
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:937
+#: src/slic3r/GUI/MainFrame.cpp:1491
 msgid ") not found."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:938
+#: src/slic3r/GUI/MainFrame.cpp:1492
 msgid "File Not Found"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:973
+#: src/slic3r/GUI/MainFrame.cpp:1527
 #, possible-c-format
 msgid "Save %s file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:973
+#: src/slic3r/GUI/MainFrame.cpp:1527
 msgid "SVG"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:973
+#: src/slic3r/GUI/MainFrame.cpp:1527
 msgid "G-code"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:985
+#: src/slic3r/GUI/MainFrame.cpp:1539
 msgid "Save zip file as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:994 src/slic3r/GUI/Plater.cpp:3121
-#: src/slic3r/GUI/Plater.cpp:5122 src/slic3r/GUI/Tab.cpp:1289
-#: src/slic3r/GUI/Tab.cpp:3731
+#: src/slic3r/GUI/MainFrame.cpp:1548 src/slic3r/GUI/Plater.cpp:2921
+#: src/slic3r/GUI/Plater.cpp:5234 src/slic3r/GUI/Tab.cpp:1551
+#: src/slic3r/GUI/Tab.cpp:4081
 msgid "Slicing"
 msgstr ""
 
 #. TRN "Processing input_file_basename"
-#: src/slic3r/GUI/MainFrame.cpp:996
+#: src/slic3r/GUI/MainFrame.cpp:1550
 #, possible-c-format
 msgid "Processing %s"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1019
+#: src/slic3r/GUI/MainFrame.cpp:1573
 msgid " was successfully sliced."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1021
+#: src/slic3r/GUI/MainFrame.cpp:1575
 msgid "Slicing Done!"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1036
+#: src/slic3r/GUI/MainFrame.cpp:1590
 msgid "Select the STL file to repair:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1046
+#: src/slic3r/GUI/MainFrame.cpp:1600
 msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1058
+#: src/slic3r/GUI/MainFrame.cpp:1612
 msgid "Your file was repaired."
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1058 src/libslic3r/PrintConfig.cpp:3469
+#: src/slic3r/GUI/MainFrame.cpp:1612 src/libslic3r/PrintConfig.cpp:3646
 msgid "Repair"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1072
+#: src/slic3r/GUI/MainFrame.cpp:1626
 msgid "Save configuration as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1091 src/slic3r/GUI/MainFrame.cpp:1153
+#: src/slic3r/GUI/MainFrame.cpp:1645 src/slic3r/GUI/MainFrame.cpp:1707
 msgid "Select configuration to load:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1127
+#: src/slic3r/GUI/MainFrame.cpp:1681
 msgid "Save presets bundle as:"
 msgstr ""
 
-#: src/slic3r/GUI/MainFrame.cpp:1174
+#: src/slic3r/GUI/MainFrame.cpp:1728
 #, possible-c-format
 msgid "%d presets successfully imported."
 msgstr ""
@@ -3962,32 +4679,36 @@ msgstr ""
 msgid "3Dconnexion settings"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:278
+#: src/slic3r/GUI/Mouse3DController.cpp:274
 msgid "Device:"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:285
+#: src/slic3r/GUI/Mouse3DController.cpp:279
 msgid "Speed:"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:289
-#: src/slic3r/GUI/Mouse3DController.cpp:312
+#: src/slic3r/GUI/Mouse3DController.cpp:282
+#: src/slic3r/GUI/Mouse3DController.cpp:303
 msgid "Translation"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:301
-#: src/slic3r/GUI/Mouse3DController.cpp:312
+#: src/slic3r/GUI/Mouse3DController.cpp:294
+#: src/slic3r/GUI/Mouse3DController.cpp:303
 msgid "Zoom"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:308
+#: src/slic3r/GUI/Mouse3DController.cpp:300
 msgid "Deadzone:"
 msgstr ""
 
-#: src/slic3r/GUI/Mouse3DController.cpp:325
+#: src/slic3r/GUI/Mouse3DController.cpp:315
 msgid "Options:"
 msgstr ""
 
+#: src/slic3r/GUI/Mouse3DController.cpp:318
+msgid "Swap Y/Z axes"
+msgstr ""
+
 #: src/slic3r/GUI/MsgDialog.cpp:73
 #, possible-c-format
 msgid "%s error"
@@ -3998,6 +4719,60 @@ msgstr ""
 msgid "%s has encountered an error"
 msgstr ""
 
+#: src/slic3r/GUI/NotificationManager.hpp:317
+msgid "Exporting finished."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:317
+msgid "Eject drive."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:318
+msgid "3D Mouse disconnected."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:321
+msgid "Configuration update is available."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:321
+msgid "See more."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:322
+msgid "New version is available."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.hpp:322
+msgid "See Releases page."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:305
+#: src/slic3r/GUI/NotificationManager.cpp:315
+msgid "More"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:631
+#: src/slic3r/GUI/NotificationManager.cpp:748
+msgid "Export G-Code."
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:667
+#: src/slic3r/GUI/NotificationManager.cpp:683
+#: src/slic3r/GUI/NotificationManager.cpp:694
+msgid "ERROR:"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:672
+#: src/slic3r/GUI/NotificationManager.cpp:687
+#: src/slic3r/GUI/NotificationManager.cpp:702
+msgid "WARNING:"
+msgstr ""
+
+#: src/slic3r/GUI/NotificationManager.cpp:751
+msgid "Slicing finished."
+msgstr ""
+
 #: src/slic3r/GUI/ObjectDataViewModel.cpp:58
 msgid "Instances"
 msgstr ""
@@ -4008,8 +4783,8 @@ msgstr ""
 msgid "Instance %d"
 msgstr ""
 
-#: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3585
-#: src/slic3r/GUI/Tab.cpp:3667
+#: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:3928
+#: src/slic3r/GUI/Tab.cpp:4010
 msgid "Layers"
 msgstr ""
 
@@ -4017,649 +4792,769 @@ msgstr ""
 msgid "Range"
 msgstr ""
 
-#: src/slic3r/GUI/OptionsGroup.cpp:274
+#: src/slic3r/GUI/OpenGLManager.cpp:259
+#, possible-c-format
+msgid ""
+"PrusaSlicer requires OpenGL 2.0 capable graphics driver to run correctly, \n"
+"while OpenGL version %s, render %s, vendor %s was detected."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:262
+msgid "You may need to update your graphics card driver."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:265
+msgid ""
+"As a workaround, you may run PrusaSlicer with a software rendered 3D "
+"graphics by running prusa-slicer.exe with the --sw_renderer parameter."
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:267
+msgid "Unsupported OpenGL version"
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:275
+#, possible-c-format
+msgid ""
+"Unable to load the following shaders:\n"
+"%s"
+msgstr ""
+
+#: src/slic3r/GUI/OpenGLManager.cpp:276
+msgid "Error loading shaders"
+msgstr ""
+
+#: src/slic3r/GUI/OptionsGroup.cpp:293
 msgctxt "Layers"
 msgid "Top"
 msgstr ""
 
-#: src/slic3r/GUI/OptionsGroup.cpp:274
+#: src/slic3r/GUI/OptionsGroup.cpp:293
 msgctxt "Layers"
 msgid "Bottom"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:163
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:55
+msgid "Delete this preset from this printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:85
+msgid "This printer will be shown in the presets list as"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:159
+msgid "Physical Printer"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:165
+msgid "Type here the name of your printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:176
+msgid "Descriptive name for the printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:180
+msgid "Add preset for this printer device"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:209 src/slic3r/GUI/Tab.cpp:2024
+msgid "Print Host upload"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:284
+msgid "Test"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:289
+msgid "Could not get a valid Printer Host reference"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:295
+msgid "Success!"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:319
+msgid ""
+"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
+"signed certificate."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:329
+msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:330
+msgid "Open CA certificate file"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:358
+#: src/libslic3r/PrintConfig.cpp:113
+msgid "HTTPS CA File"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:359
+#, possible-c-format
+msgid ""
+"On this system, %s uses HTTPS certificates from the system Certificate Store "
+"or Keychain."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:360
+msgid ""
+"To use a custom CA file, please import your CA file into Certificate Store / "
+"Keychain."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:464
+msgid "The supplied name is empty. It can't be saved."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:468
+msgid "You should to change a name of your printer device. It can't be saved."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:476
+msgid "Printer with name \"%1%\" already exists."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:477
+msgid "Replace?"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:500
+msgid ""
+"Next printer preset(s) is(are) duplicated:%1%Should I add it(they) just once "
+"for the printer \"%2%\" and close the Editing Dialog?"
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:546
+msgid "It's not possible to delete last related preset for the printer."
+msgstr ""
+
+#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:547
+msgid "Infornation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:167
 msgid "Volume"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:164
+#: src/slic3r/GUI/Plater.cpp:168
 msgid "Facets"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:165
+#: src/slic3r/GUI/Plater.cpp:169
 msgid "Materials"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:168
+#: src/slic3r/GUI/Plater.cpp:172
 msgid "Manifold"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:218
+#: src/slic3r/GUI/Plater.cpp:222
 msgid "Sliced Info"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1236
+#: src/slic3r/GUI/Plater.cpp:241 src/slic3r/GUI/Plater.cpp:1141
 msgid "Used Filament (m)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:238
+#: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1153
 msgid "Used Filament (mm³)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:239
+#: src/slic3r/GUI/Plater.cpp:243
 msgid "Used Filament (g)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:240
+#: src/slic3r/GUI/Plater.cpp:244
 msgid "Used Material (unit)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:241
+#: src/slic3r/GUI/Plater.cpp:245
 msgid "Cost (money)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1223
-#: src/slic3r/GUI/Plater.cpp:1265
-msgid "Estimated printing time"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:243
+#: src/slic3r/GUI/Plater.cpp:247
 msgid "Number of tool changes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:350
-msgid "Click to edit preset"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:505
+#: src/slic3r/GUI/Plater.cpp:364
 msgid "Select what kind of support do you need"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:507 src/libslic3r/PrintConfig.cpp:1908
-#: src/libslic3r/PrintConfig.cpp:2691
+#: src/slic3r/GUI/Plater.cpp:366 src/libslic3r/PrintConfig.cpp:2043
+#: src/libslic3r/PrintConfig.cpp:2838
 msgid "Support on build plate only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:508 src/slic3r/GUI/Plater.cpp:631
+#: src/slic3r/GUI/Plater.cpp:367 src/slic3r/GUI/Plater.cpp:490
 msgid "For support enforcers only"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:509
+#: src/slic3r/GUI/Plater.cpp:368
 msgid "Everywhere"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:541 src/slic3r/GUI/Tab.cpp:1185
+#: src/slic3r/GUI/Plater.cpp:400 src/slic3r/GUI/Tab.cpp:1446
 msgid "Brim"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:543
+#: src/slic3r/GUI/Plater.cpp:402
 msgid ""
 "This flag enables the brim that will be printed around each object on the "
 "first layer."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:551
+#: src/slic3r/GUI/Plater.cpp:410
 msgid "Purging volumes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:645
+#: src/slic3r/GUI/Plater.cpp:504
 msgid "Select what kind of pad do you need"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:647
+#: src/slic3r/GUI/Plater.cpp:506
 msgid "Below object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:648
+#: src/slic3r/GUI/Plater.cpp:507
 msgid "Around object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:822
+#: src/slic3r/GUI/Plater.cpp:690
 msgid "Print settings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:823 src/slic3r/GUI/Tab.cpp:1491
-#: src/slic3r/GUI/Tab.cpp:1492
+#: src/slic3r/GUI/Plater.cpp:691 src/slic3r/GUI/Tab.cpp:1770
+#: src/slic3r/GUI/Tab.cpp:1771
 msgid "Filament"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:824
+#: src/slic3r/GUI/Plater.cpp:692
 msgid "SLA print settings"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:825 src/slic3r/GUI/Preset.cpp:1566
+#: src/slic3r/GUI/Plater.cpp:693 src/libslic3r/Preset.cpp:1303
 msgid "SLA material"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:826
+#: src/slic3r/GUI/Plater.cpp:694
 msgid "Printer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:885 src/slic3r/GUI/Plater.cpp:5532
+#: src/slic3r/GUI/Plater.cpp:753 src/slic3r/GUI/Plater.cpp:5707
 msgid "Send to printer"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:886
+#: src/slic3r/GUI/Plater.cpp:754
 msgid "Remove device"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:899 src/slic3r/GUI/Plater.cpp:3121
-#: src/slic3r/GUI/Plater.cpp:5125
+#: src/slic3r/GUI/Plater.cpp:767 src/slic3r/GUI/Plater.cpp:2921
+#: src/slic3r/GUI/Plater.cpp:5237
 msgid "Slice now"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1049
+#: src/slic3r/GUI/Plater.cpp:916
 msgid "Hold Shift to Slice & Export G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1159
+#: src/slic3r/GUI/Plater.cpp:1061
 #, possible-c-format
 msgid "%d (%d shells)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1164
+#: src/slic3r/GUI/Plater.cpp:1066
 #, possible-c-format
 msgid "Auto-repaired (%d errors)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1167
+#: src/slic3r/GUI/Plater.cpp:1069
 #, possible-c-format
 msgid ""
 "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
 "facets reversed, %d backwards edges"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1177
+#: src/slic3r/GUI/Plater.cpp:1079
 msgid "Yes"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1198
+#: src/slic3r/GUI/Plater.cpp:1100
 msgid "Used Material (ml)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1201
+#: src/slic3r/GUI/Plater.cpp:1103
 msgid "object(s)"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1201
+#: src/slic3r/GUI/Plater.cpp:1103
 msgid "supports and pad"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1238 src/slic3r/GUI/Plater.cpp:1252
+#: src/slic3r/GUI/Plater.cpp:1141
+msgid "Used Filament (in)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1143 src/slic3r/GUI/Plater.cpp:1160
 msgid "objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1238 src/slic3r/GUI/Plater.cpp:1252
+#: src/slic3r/GUI/Plater.cpp:1143 src/slic3r/GUI/Plater.cpp:1160
 msgid "wipe tower"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1250 src/libslic3r/PrintConfig.cpp:760
-#: src/libslic3r/PrintConfig.cpp:2517 src/libslic3r/PrintConfig.cpp:2518
+#: src/slic3r/GUI/Plater.cpp:1153
+msgid "Used Filament (in³)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1158 src/libslic3r/PrintConfig.cpp:796
+#: src/libslic3r/PrintConfig.cpp:2653 src/libslic3r/PrintConfig.cpp:2654
 msgid "Cost"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1267 src/libslic3r/PrintConfig.cpp:582
-msgid "Color"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1268
-msgid "Pause"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:1293
+#: src/slic3r/GUI/Plater.cpp:1177 src/slic3r/GUI/Plater.cpp:1224
 msgid "normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1298
+#: src/slic3r/GUI/Plater.cpp:1187 src/slic3r/GUI/Plater.cpp:1235
 msgid "stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:1402
-msgid "Load File"
+#: src/slic3r/GUI/Plater.cpp:1198 src/libslic3r/PrintConfig.cpp:618
+msgid "Color"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1405
+msgid "You can open only one .gcode file at a time."
 msgstr ""
 
 #: src/slic3r/GUI/Plater.cpp:1406
+msgid "Drag and drop G-code file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1436
+msgid "Load File"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1440
 msgid "Load Files"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2207
+#: src/slic3r/GUI/Plater.cpp:1555
+msgid "Optimize Rotation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1561
+msgid "Import SLA archive"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2031
 #, possible-c-format
 msgid ""
 "Unmounting successful. The device %s(%s) can now be safely removed from the "
 "computer."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2210
+#: src/slic3r/GUI/Plater.cpp:2034
 #, possible-c-format
 msgid "Ejecting of device %s(%s) has failed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2223
+#: src/slic3r/GUI/Plater.cpp:2056
 msgid "New Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2337
+#: src/slic3r/GUI/Plater.cpp:2143
+msgid "Expand sidebar"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2216
 msgid "Loading"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2347
+#: src/slic3r/GUI/Plater.cpp:2226
+msgid "Loading file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2309
 #, possible-c-format
-msgid "Processing input file %s"
+msgid ""
+"Some object(s) in file %s looks like saved in inches.\n"
+"Should I consider them as a saved in inches and convert them?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2375
-msgid "You cannot load SLA project with a multi-part object on the bed"
+#: src/slic3r/GUI/Plater.cpp:2311
+msgid "Saved in inches object detected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2376 src/slic3r/GUI/Tab.cpp:2958
-msgid "Please check your object list before preset changing."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2421
+#: src/slic3r/GUI/Plater.cpp:2319
 msgid ""
 "This file contains several objects positioned at multiple heights.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "this file as a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2424 src/slic3r/GUI/Plater.cpp:2477
+#: src/slic3r/GUI/Plater.cpp:2322 src/slic3r/GUI/Plater.cpp:2375
 msgid "Multi-part object detected"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2431
+#: src/slic3r/GUI/Plater.cpp:2329
 msgid ""
 "This file cannot be loaded in a simple mode. Do you want to switch to an "
 "advanced mode?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2432
+#: src/slic3r/GUI/Plater.cpp:2330
 msgid "Detected advanced data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2454
+#: src/slic3r/GUI/Plater.cpp:2352
 #, possible-c-format
 msgid ""
 "You can't to add the object(s) from %s because of one or some of them "
 "is(are) multi-part"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2474
+#: src/slic3r/GUI/Plater.cpp:2372
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2490
+#: src/slic3r/GUI/Plater.cpp:2388
 msgid "Loaded"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2592
+#: src/slic3r/GUI/Plater.cpp:2490
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2593
+#: src/slic3r/GUI/Plater.cpp:2491
 msgid "Object too large?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2655
+#: src/slic3r/GUI/Plater.cpp:2553
 msgid "Export STL file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2662
+#: src/slic3r/GUI/Plater.cpp:2560
 msgid "Export AMF file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2668
+#: src/slic3r/GUI/Plater.cpp:2566
 msgid "Save file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2674
+#: src/slic3r/GUI/Plater.cpp:2572
 msgid "Export OBJ file:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2773
+#: src/slic3r/GUI/Plater.cpp:2673
 msgid "Delete Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2784
+#: src/slic3r/GUI/Plater.cpp:2684
 msgid "Reset Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2823
-msgid "Optimize Rotation"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2869
-msgid "Arranging"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2896
-msgid "Could not arrange model objects! Some geometries may be invalid."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2902
-msgid "Arranging canceled."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2903
-msgid "Arranging done."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2919
-msgid "Searching for optimal orientation"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2952
-msgid "Orientation search canceled."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2953
-msgid "Orientation found."
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:2970
+#: src/slic3r/GUI/Plater.cpp:2763
 msgid ""
 "The selected object can't be split because it contains more than one volume/"
 "material."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:2981
+#: src/slic3r/GUI/Plater.cpp:2774
 msgid "Split to Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3106
+#: src/slic3r/GUI/Plater.cpp:2906 src/slic3r/GUI/Plater.cpp:3583
 msgid "Invalid data"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3115
+#: src/slic3r/GUI/Plater.cpp:2915
 msgid "Ready to slice"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3153 src/slic3r/GUI/PrintHostDialogs.cpp:232
+#: src/slic3r/GUI/Plater.cpp:2953 src/slic3r/GUI/PrintHostDialogs.cpp:232
 msgid "Cancelling"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3170
+#: src/slic3r/GUI/Plater.cpp:2972
 msgid "Another export job is currently running."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3286
+#: src/slic3r/GUI/Plater.cpp:3089
 msgid "Please select the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3321
+#: src/slic3r/GUI/Plater.cpp:3124
 msgid "It is not allowed to change the file to reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3321
+#: src/slic3r/GUI/Plater.cpp:3124
 msgid "Do you want to retry"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3339
+#: src/slic3r/GUI/Plater.cpp:3142
 msgid "Reload from:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3428
+#: src/slic3r/GUI/Plater.cpp:3233
 msgid "Unable to reload:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3433
+#: src/slic3r/GUI/Plater.cpp:3238
 msgid "Error during reload"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3452
+#: src/slic3r/GUI/Plater.cpp:3257
 msgid "Reload all from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3473
+#: src/slic3r/GUI/Plater.cpp:3278
 msgid "Fix Throught NetFabb"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3672
-msgid "Export failed"
+#: src/slic3r/GUI/Plater.cpp:3543
+msgid "There are active warnings concerning sliced models:\n"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3682 src/slic3r/GUI/PrintHostDialogs.cpp:233
+#: src/slic3r/GUI/Plater.cpp:3554
+msgid "generated warnings"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3589 src/slic3r/GUI/PrintHostDialogs.cpp:233
 msgid "Cancelled"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3935 src/slic3r/GUI/Plater.cpp:3957
+#: src/slic3r/GUI/Plater.cpp:3849 src/slic3r/GUI/Plater.cpp:3871
 msgid "Remove the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3944
+#: src/slic3r/GUI/Plater.cpp:3858
 msgid "Add one more instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3946
+#: src/slic3r/GUI/Plater.cpp:3860
 msgid "Remove one instance of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3948
+#: src/slic3r/GUI/Plater.cpp:3862
 msgid "Set number of instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3948
+#: src/slic3r/GUI/Plater.cpp:3862
 msgid "Change the number of instances of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3967
+#: src/slic3r/GUI/Plater.cpp:3881
 msgid "Reload the selected object from disk"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3970
+#: src/slic3r/GUI/Plater.cpp:3884
 msgid "Export the selected object as STL file"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3999
+#: src/slic3r/GUI/Plater.cpp:3915
 msgid "Along X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:3999
+#: src/slic3r/GUI/Plater.cpp:3915
 msgid "Mirror the selected object along the X axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4001
+#: src/slic3r/GUI/Plater.cpp:3917
 msgid "Along Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4001
+#: src/slic3r/GUI/Plater.cpp:3917
 msgid "Mirror the selected object along the Y axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4003
+#: src/slic3r/GUI/Plater.cpp:3919
 msgid "Along Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4003
+#: src/slic3r/GUI/Plater.cpp:3919
 msgid "Mirror the selected object along the Z axis"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4006
+#: src/slic3r/GUI/Plater.cpp:3922
 msgid "Mirror"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4006
+#: src/slic3r/GUI/Plater.cpp:3922
 msgid "Mirror the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4018
+#: src/slic3r/GUI/Plater.cpp:3934
 msgid "To objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4018 src/slic3r/GUI/Plater.cpp:4038
+#: src/slic3r/GUI/Plater.cpp:3934 src/slic3r/GUI/Plater.cpp:3954
 msgid "Split the selected object into individual objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4020
+#: src/slic3r/GUI/Plater.cpp:3936
 msgid "To parts"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4020 src/slic3r/GUI/Plater.cpp:4052
+#: src/slic3r/GUI/Plater.cpp:3936 src/slic3r/GUI/Plater.cpp:3972
 msgid "Split the selected object into individual sub-parts"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4023 src/slic3r/GUI/Plater.cpp:4038
-#: src/slic3r/GUI/Plater.cpp:4052 src/libslic3r/PrintConfig.cpp:3493
+#: src/slic3r/GUI/Plater.cpp:3939 src/slic3r/GUI/Plater.cpp:3954
+#: src/slic3r/GUI/Plater.cpp:3972 src/libslic3r/PrintConfig.cpp:3670
 msgid "Split"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4023
+#: src/slic3r/GUI/Plater.cpp:3939
 msgid "Split the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4044
-msgid "Optimize orientation"
-msgstr ""
-
-#: src/slic3r/GUI/Plater.cpp:4044
+#: src/slic3r/GUI/Plater.cpp:3962
 msgid "Optimize the rotation of the object for better print results."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4121
+#: src/slic3r/GUI/Plater.cpp:4044
 msgid "3D editor view"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4428
+#: src/slic3r/GUI/Plater.cpp:4423
 msgid ""
 "%1% printer was active at the time the target Undo / Redo snapshot was "
 "taken. Switching to %1% printer requires reloading of %1% presets."
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4604
+#: src/slic3r/GUI/Plater.cpp:4627
 msgid "Load Project"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4632
+#: src/slic3r/GUI/Plater.cpp:4655
 msgid "Import Object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4636
+#: src/slic3r/GUI/Plater.cpp:4659
 msgid "Import Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4705
+#: src/slic3r/GUI/Plater.cpp:4774
 msgid "All objects will be removed, continue?"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4713
+#: src/slic3r/GUI/Plater.cpp:4782
 msgid "Delete Selected Objects"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4721
+#: src/slic3r/GUI/Plater.cpp:4790
 msgid "Increase Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4756
+#: src/slic3r/GUI/Plater.cpp:4824
 msgid "Decrease Instances"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4787
+#: src/slic3r/GUI/Plater.cpp:4855
 msgid "Enter the number of copies:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4788
+#: src/slic3r/GUI/Plater.cpp:4856
 msgid "Copies of the selected object"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4792
+#: src/slic3r/GUI/Plater.cpp:4860
 #, possible-c-format
 msgid "Set numbers of copies to %d"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4822
+#: src/slic3r/GUI/Plater.cpp:4921
 msgid "Cut by Plane"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4873
+#: src/slic3r/GUI/Plater.cpp:4975
 msgid "Save G-code file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:4873
+#: src/slic3r/GUI/Plater.cpp:4975
 msgid "Save SL1 file as:"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5008
+#: src/slic3r/GUI/Plater.cpp:5118
 #, possible-c-format
 msgid "STL file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5025
+#: src/slic3r/GUI/Plater.cpp:5135
 #, possible-c-format
 msgid "AMF file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5028
+#: src/slic3r/GUI/Plater.cpp:5138
 #, possible-c-format
 msgid "Error exporting AMF file %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5057
+#: src/slic3r/GUI/Plater.cpp:5167
 #, possible-c-format
 msgid "3MF file exported to %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5062
+#: src/slic3r/GUI/Plater.cpp:5172
 #, possible-c-format
 msgid "Error exporting 3MF file %s"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5531
+#: src/slic3r/GUI/Plater.cpp:5706
 msgid "Export"
 msgstr ""
 
-#: src/slic3r/GUI/Plater.cpp:5617
+#: src/slic3r/GUI/Plater.cpp:5803
 msgid "Paste From Clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:22 src/slic3r/GUI/Tab.cpp:1857
-#: src/slic3r/GUI/Tab.cpp:2069
+#: src/slic3r/GUI/Preferences.cpp:24 src/slic3r/GUI/Tab.cpp:2058
+#: src/slic3r/GUI/Tab.cpp:2240 src/slic3r/GUI/Tab.cpp:2348
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
 msgid "General"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:39
+#: src/slic3r/GUI/Preferences.cpp:52
 msgid "Remember output directory"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:41
+#: src/slic3r/GUI/Preferences.cpp:54
 msgid ""
 "If this is enabled, Slic3r will prompt the last output directory instead of "
 "the one containing the input files."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:47
+#: src/slic3r/GUI/Preferences.cpp:64
 msgid "Auto-center parts"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:49
+#: src/slic3r/GUI/Preferences.cpp:66
 msgid ""
 "If this is enabled, Slic3r will auto-center objects around the print bed "
 "center."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:55
+#: src/slic3r/GUI/Preferences.cpp:72
 msgid "Background processing"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:57
+#: src/slic3r/GUI/Preferences.cpp:74
 msgid ""
 "If this is enabled, Slic3r will pre-process objects as soon as they're "
 "loaded in order to save time when exporting G-code."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:66
+#: src/slic3r/GUI/Preferences.cpp:83
 msgid ""
 "If enabled, PrusaSlicer will check for the new versions of itself online. "
 "When a new version becomes available a notification is displayed at the next "
@@ -4667,17 +5562,17 @@ msgid ""
 "notification mechanisms, no automatic installation is done."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:72
+#: src/slic3r/GUI/Preferences.cpp:89
 msgid "Export sources full pathnames to 3mf and amf"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:74
+#: src/slic3r/GUI/Preferences.cpp:91
 msgid ""
 "If enabled, allows the Reload from disk command to automatically find and "
 "load the files when invoked."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:82
+#: src/slic3r/GUI/Preferences.cpp:99
 msgid ""
 "If enabled, Slic3r downloads updates of built-in system presets in the "
 "background. These updates are downloaded into a separate temporary location. "
@@ -4685,263 +5580,383 @@ msgid ""
 "startup."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:87
+#: src/slic3r/GUI/Preferences.cpp:104
 msgid "Suppress \" - default - \" presets"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:89
+#: src/slic3r/GUI/Preferences.cpp:106
 msgid ""
 "Suppress \" - default - \" presets in the Print / Filament / Printer "
 "selections once there are any other valid presets available."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:95
+#: src/slic3r/GUI/Preferences.cpp:112
 msgid "Show incompatible print and filament presets"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:97
+#: src/slic3r/GUI/Preferences.cpp:114
 msgid ""
 "When checked, the print and filament presets are shown in the preset editor "
 "even if they are marked as incompatible with the active printer"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:104
+#: src/slic3r/GUI/Preferences.cpp:120 src/libslic3r/PrintConfig.cpp:3697
+msgid "Single Instance"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:123
+msgid ""
+"On OSX there is always only one instance of app running by default. However "
+"it is allowed to run multiple instances of same app from the command line. "
+"In such case this settings will allow only one instance."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:125
+msgid ""
+"If this is enabled, when staring PrusaSlicer and another instance of same "
+"PrusaSlicer is running, that instance will be reactivated instead."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:135
 msgid "Use Retina resolution for the 3D scene"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:106
+#: src/slic3r/GUI/Preferences.cpp:137
 msgid ""
 "If enabled, the 3D scene will be rendered in Retina resolution. If you are "
 "experiencing 3D performance problems, disabling this option may help."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:113
+#: src/slic3r/GUI/Preferences.cpp:154
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:659
+msgid "Ask for unsaved changes when closing application"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:156
+msgid "Always ask for unsaved changes when closing application"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:161
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:660
+msgid "Ask for unsaved changes when selecting new preset"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:163
+msgid "Always ask for unsaved changes when selecting new preset"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:169 src/slic3r/GUI/Preferences.cpp:171
+msgid "Show splash screen"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:178
 msgid "Camera"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:119
+#: src/slic3r/GUI/Preferences.cpp:184
 msgid "Use perspective camera"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:121
+#: src/slic3r/GUI/Preferences.cpp:186
 msgid ""
 "If enabled, use perspective camera. If not enabled, use orthographic camera."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:126
+#: src/slic3r/GUI/Preferences.cpp:191
 msgid "Use free camera"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:128
+#: src/slic3r/GUI/Preferences.cpp:193
 msgid "If enabled, use free camera. If not enabled, use constrained camera."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:133
+#: src/slic3r/GUI/Preferences.cpp:200
 msgid "GUI"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:143
+#: src/slic3r/GUI/Preferences.cpp:213
+msgid "Show sidebar collapse/expand button"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:215
+msgid ""
+"If enabled, the button for the collapse sidebar will be appeared in top "
+"right corner of the 3D Scene"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:220
 msgid "Use custom size for toolbar icons"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:145
+#: src/slic3r/GUI/Preferences.cpp:222
 msgid "If enabled, you can change size of toolbar icons manually."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:172
+#: src/slic3r/GUI/Preferences.cpp:230
+msgid "Sequential slider applied only to top layer"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:232
+msgid ""
+"If enabled, changes made using the sequential slider, in preview, apply only "
+"to gcode top layer, if disabled, changes made using the sequential slider, "
+"in preview, apply to the whole gcode."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:255
+msgid "Render"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:261
+msgid "Use environment map"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:263
+msgid "If enabled, renders object using the environment map."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:299
 #, possible-c-format
 msgid "You need to restart %s to make the changes effective."
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:222
+#: src/slic3r/GUI/Preferences.cpp:376
 msgid "Icon size in a respect to the default size"
 msgstr ""
 
-#: src/slic3r/GUI/Preferences.cpp:237
+#: src/slic3r/GUI/Preferences.cpp:391
 msgid "Select toolbar icon size in respect to the default one."
 msgstr ""
 
-#: src/slic3r/GUI/Preset.cpp:250
-msgid "modified"
+#: src/slic3r/GUI/Preferences.cpp:422
+msgid "Old regular layout with the tab bar"
 msgstr ""
 
-#: src/slic3r/GUI/Preset.cpp:1151 src/slic3r/GUI/Preset.cpp:1206
-#: src/slic3r/GUI/Preset.cpp:1284 src/slic3r/GUI/Preset.cpp:1326
-#: src/slic3r/GUI/PresetBundle.cpp:1599 src/slic3r/GUI/PresetBundle.cpp:1697
+#: src/slic3r/GUI/Preferences.cpp:423
+msgid "New layout without the tab bar on the plater"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:424
+msgid "Settings will be shown in the non-modal dialog"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:433
+msgid "Settings layout mode"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:188
+#: src/slic3r/GUI/PresetComboBoxes.cpp:226
+#: src/slic3r/GUI/PresetComboBoxes.cpp:724
+#: src/slic3r/GUI/PresetComboBoxes.cpp:774
+#: src/slic3r/GUI/PresetComboBoxes.cpp:886
+#: src/slic3r/GUI/PresetComboBoxes.cpp:930
 msgid "System presets"
 msgstr ""
 
-#: src/slic3r/GUI/Preset.cpp:1210 src/slic3r/GUI/Preset.cpp:1330
-#: src/slic3r/GUI/PresetBundle.cpp:1702
+#: src/slic3r/GUI/PresetComboBoxes.cpp:230
+#: src/slic3r/GUI/PresetComboBoxes.cpp:778
+#: src/slic3r/GUI/PresetComboBoxes.cpp:934
 msgid "User presets"
 msgstr ""
 
-#: src/slic3r/GUI/Preset.cpp:1243
+#: src/slic3r/GUI/PresetComboBoxes.cpp:241
+msgid "Incompatible presets"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:566
+msgid "Click to edit preset"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:622
+#: src/slic3r/GUI/PresetComboBoxes.cpp:669
+msgid "Add/Remove presets"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:627
+#: src/slic3r/GUI/PresetComboBoxes.cpp:674
+msgid "Add physical printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:641
+msgid "Edit preset"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:645
+msgid "Edit physical printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:652
+msgid "Delete physical printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:658
+msgid "Are you sure you want to delete \"%1%\" printer?"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:659
+msgid "Delete Physical Printer"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:789
+#: src/slic3r/GUI/PresetComboBoxes.cpp:948
+msgid "Physical printers"
+msgstr ""
+
+#: src/slic3r/GUI/PresetComboBoxes.cpp:813
 msgid "Add/Remove materials"
 msgstr ""
 
-#: src/slic3r/GUI/Preset.cpp:1245
+#: src/slic3r/GUI/PresetComboBoxes.cpp:815
+#: src/slic3r/GUI/PresetComboBoxes.cpp:972
 msgid "Add/Remove printers"
 msgstr ""
 
-#: src/slic3r/GUI/Preset.cpp:1564
-msgid "filament"
-msgstr ""
-
-#: src/slic3r/GUI/Preset.cpp:1565
-msgid "SLA print"
-msgstr ""
-
-#: src/slic3r/GUI/PresetBundle.cpp:1729
-msgid "Add/Remove filaments"
-msgstr ""
-
-#: src/slic3r/GUI/PresetHints.cpp:29
+#: src/slic3r/GUI/PresetHints.cpp:28
 msgid ""
 "If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
 "speed will be reduced so that no less than %3%s are spent on that layer "
 "(however, speed will never be reduced below %4%mm/s)."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:36
+#: src/slic3r/GUI/PresetHints.cpp:35
 msgid ""
 "If estimated layer time is greater, but still below ~%1%s, fan will run at a "
 "proportionally decreasing speed between %2%%% and %3%%%."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:40
+#: src/slic3r/GUI/PresetHints.cpp:39
 msgid "During the other layers, fan"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:42
+#: src/slic3r/GUI/PresetHints.cpp:41
 msgid "Fan"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:48
+#: src/slic3r/GUI/PresetHints.cpp:47
 msgid "will always run at %1%%%"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:51
+#: src/slic3r/GUI/PresetHints.cpp:50
 msgid "except for the first %1% layers."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:53
+#: src/slic3r/GUI/PresetHints.cpp:52
 msgid "except for the first layer."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:55
+#: src/slic3r/GUI/PresetHints.cpp:54
 msgid "will be turned off."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:156
+#: src/slic3r/GUI/PresetHints.cpp:155
 msgid "external perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:165
+#: src/slic3r/GUI/PresetHints.cpp:164
 msgid "perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:174
+#: src/slic3r/GUI/PresetHints.cpp:173
 msgid "infill"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:184
+#: src/slic3r/GUI/PresetHints.cpp:183
 msgid "solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:192
+#: src/slic3r/GUI/PresetHints.cpp:191
 msgid "top solid infill"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:203
+#: src/slic3r/GUI/PresetHints.cpp:202
 msgid "support"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:213
+#: src/slic3r/GUI/PresetHints.cpp:212
 msgid "support interface"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:219
+#: src/slic3r/GUI/PresetHints.cpp:218
 msgid "First layer volumetric"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:219
+#: src/slic3r/GUI/PresetHints.cpp:218
 msgid "Bridging volumetric"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:219
+#: src/slic3r/GUI/PresetHints.cpp:218
 msgid "Volumetric"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:220
+#: src/slic3r/GUI/PresetHints.cpp:219
 msgid "flow rate is maximized"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:223
+#: src/slic3r/GUI/PresetHints.cpp:222
 msgid "by the print profile maximum"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:224
+#: src/slic3r/GUI/PresetHints.cpp:223
 msgid "when printing"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:225
+#: src/slic3r/GUI/PresetHints.cpp:224
 msgid "with a volumetric rate"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:229
+#: src/slic3r/GUI/PresetHints.cpp:228
 #, possible-c-format
 msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:247
+#: src/slic3r/GUI/PresetHints.cpp:246
 msgid ""
 "Recommended object thin wall thickness: Not available due to invalid layer "
 "height."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:263
+#: src/slic3r/GUI/PresetHints.cpp:262
 #, possible-c-format
 msgid "Recommended object thin wall thickness for layer height %.2f and"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:270
+#: src/slic3r/GUI/PresetHints.cpp:269
 #, possible-c-format
 msgid "%d lines: %.2f mm"
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:274
+#: src/slic3r/GUI/PresetHints.cpp:273
 msgid ""
 "Recommended object thin wall thickness: Not available due to excessively "
 "small extrusion width."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:304
+#: src/slic3r/GUI/PresetHints.cpp:302
 msgid ""
 "Top / bottom shell thickness hint: Not available due to invalid layer height."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:317
+#: src/slic3r/GUI/PresetHints.cpp:315
 msgid "Top shell is %1% mm thick for layer height %2% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:320
+#: src/slic3r/GUI/PresetHints.cpp:318
 msgid "Minimum top shell thickness is %1% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:323
+#: src/slic3r/GUI/PresetHints.cpp:321
 msgid "Top is open."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:336
+#: src/slic3r/GUI/PresetHints.cpp:334
 msgid "Bottom shell is %1% mm thick for layer height %2% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:339
+#: src/slic3r/GUI/PresetHints.cpp:337
 msgid "Minimum bottom shell thickness is %1% mm."
 msgstr ""
 
-#: src/slic3r/GUI/PresetHints.cpp:342
+#: src/slic3r/GUI/PresetHints.cpp:340
 msgid "Bottom is open."
 msgstr ""
 
@@ -4961,35 +5976,35 @@ msgstr ""
 msgid "Use forward slashes ( / ) as a directory separator if needed."
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:149
+#: src/slic3r/GUI/PrintHostDialogs.cpp:147
 msgid "ID"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:150
+#: src/slic3r/GUI/PrintHostDialogs.cpp:148
 msgid "Progress"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:151
+#: src/slic3r/GUI/PrintHostDialogs.cpp:149
 msgid "Status"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:152
+#: src/slic3r/GUI/PrintHostDialogs.cpp:150
 msgid "Host"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:153
+#: src/slic3r/GUI/PrintHostDialogs.cpp:151
 msgid "Filename"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:154
+#: src/slic3r/GUI/PrintHostDialogs.cpp:152
 msgid "Error Message"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:157
+#: src/slic3r/GUI/PrintHostDialogs.cpp:155
 msgid "Cancel selected"
 msgstr ""
 
-#: src/slic3r/GUI/PrintHostDialogs.cpp:159
+#: src/slic3r/GUI/PrintHostDialogs.cpp:157
 msgid "Show error message"
 msgstr ""
 
@@ -5014,17 +6029,13 @@ msgstr ""
 msgid "NO RAMMING AT ALL"
 msgstr ""
 
-#: src/slic3r/GUI/RammingChart.cpp:76
-msgid "Time"
-msgstr ""
-
 #: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:83
-#: src/libslic3r/PrintConfig.cpp:644 src/libslic3r/PrintConfig.cpp:688
-#: src/libslic3r/PrintConfig.cpp:703 src/libslic3r/PrintConfig.cpp:2415
-#: src/libslic3r/PrintConfig.cpp:2424 src/libslic3r/PrintConfig.cpp:2534
-#: src/libslic3r/PrintConfig.cpp:2542 src/libslic3r/PrintConfig.cpp:2550
-#: src/libslic3r/PrintConfig.cpp:2557 src/libslic3r/PrintConfig.cpp:2565
-#: src/libslic3r/PrintConfig.cpp:2573
+#: src/libslic3r/PrintConfig.cpp:680 src/libslic3r/PrintConfig.cpp:724
+#: src/libslic3r/PrintConfig.cpp:739 src/libslic3r/PrintConfig.cpp:2551
+#: src/libslic3r/PrintConfig.cpp:2560 src/libslic3r/PrintConfig.cpp:2670
+#: src/libslic3r/PrintConfig.cpp:2678 src/libslic3r/PrintConfig.cpp:2686
+#: src/libslic3r/PrintConfig.cpp:2693 src/libslic3r/PrintConfig.cpp:2701
+#: src/libslic3r/PrintConfig.cpp:2709
 msgid "s"
 msgstr ""
 
@@ -5032,441 +6043,484 @@ msgstr ""
 msgid "Volumetric speed"
 msgstr ""
 
-#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:601
-#: src/libslic3r/PrintConfig.cpp:1250
+#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:637
+#: src/libslic3r/PrintConfig.cpp:1358
 msgid "mm³/s"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:147
+#: src/slic3r/GUI/SavePresetDialog.cpp:72
+#, possible-c-format
+msgid "Save %s as:"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:125
+msgid "the following suffix is not allowed:"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:131
+msgid "The supplied name is not available."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:137
+msgid "Cannot overwrite a system profile."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:142
+msgid "Cannot overwrite an external profile."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:148
+msgid "Preset with name \"%1%\" already exists."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:150
+msgid "And selected preset is imcopatible with selected printer."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:151
+msgid "Note: This preset will be replaced after saving"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:156
+msgid "The empty name is not available."
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:190
+#: src/slic3r/GUI/SavePresetDialog.cpp:196
+msgid "Save preset"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:219
+msgctxt "PresetName"
+msgid "Copy"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:277
+msgid ""
+"You have selected physical printer \"%1%\" \n"
+"with related printer preset \"%2%\""
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:310
+msgid "What would you like to do with \"%1%\" preset after saving?"
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:313
+msgid "Change \"%1%\" to \"%2%\" for this physical printer \"%3%\""
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:314
+msgid "Add \"%1%\" as a next preset for the the physical printer \"%2%\""
+msgstr ""
+
+#: src/slic3r/GUI/SavePresetDialog.cpp:315
+msgid "Just switch to \"%1%\" preset"
+msgstr ""
+
+#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2378
+msgid "Stealth"
+msgstr ""
+
+#: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2372
+msgid "Normal"
+msgstr ""
+
+#: src/slic3r/GUI/Selection.cpp:191
 msgid "Selection-Add"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:188
+#: src/slic3r/GUI/Selection.cpp:232
 msgid "Selection-Remove"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:220
+#: src/slic3r/GUI/Selection.cpp:264
 msgid "Selection-Add Object"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:239
+#: src/slic3r/GUI/Selection.cpp:283
 msgid "Selection-Remove Object"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:257
+#: src/slic3r/GUI/Selection.cpp:301
 msgid "Selection-Add Instance"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:276
+#: src/slic3r/GUI/Selection.cpp:320
 msgid "Selection-Remove Instance"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:377
+#: src/slic3r/GUI/Selection.cpp:421
 msgid "Selection-Add All"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:403
+#: src/slic3r/GUI/Selection.cpp:447
 msgid "Selection-Remove All"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:946
+#: src/slic3r/GUI/Selection.cpp:988
 msgid "Scale To Fit"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:1483
+#: src/slic3r/GUI/Selection.cpp:1515
 msgid "Set Printable Instance"
 msgstr ""
 
-#: src/slic3r/GUI/Selection.cpp:1483
+#: src/slic3r/GUI/Selection.cpp:1515
 msgid "Set Unprintable Instance"
 msgstr ""
 
-#: src/slic3r/GUI/SysInfoDialog.cpp:78
+#: src/slic3r/GUI/SysInfoDialog.cpp:90 src/slic3r/GUI/SysInfoDialog.cpp:92
 msgid "System Information"
 msgstr ""
 
-#: src/slic3r/GUI/SysInfoDialog.cpp:158
+#: src/slic3r/GUI/SysInfoDialog.cpp:177
 msgid "Copy to Clipboard"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:51 src/libslic3r/PrintConfig.cpp:265
+#: src/slic3r/GUI/Tab.cpp:101 src/libslic3r/PrintConfig.cpp:299
 msgid "Compatible printers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:52
+#: src/slic3r/GUI/Tab.cpp:102
 msgid "Select the printers this profile is compatible with."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:57 src/libslic3r/PrintConfig.cpp:280
+#: src/slic3r/GUI/Tab.cpp:107 src/libslic3r/PrintConfig.cpp:314
 msgid "Compatible print profiles"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:58
+#: src/slic3r/GUI/Tab.cpp:108
 msgid "Select the print profiles this profile is compatible with."
 msgstr ""
 
 #. TRN "Save current Settings"
-#: src/slic3r/GUI/Tab.cpp:134
+#: src/slic3r/GUI/Tab.cpp:203
 #, possible-c-format
 msgid "Save current %s"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:135
+#: src/slic3r/GUI/Tab.cpp:204
 msgid "Delete this preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:140
+#: src/slic3r/GUI/Tab.cpp:210
 msgid ""
 "Hover the cursor over buttons to find more information \n"
 "or click this button."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:248
-msgid "Add a new printer"
+#: src/slic3r/GUI/Tab.cpp:214
+msgid "Click to start a search or use %1% shortcut"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:970
+#: src/slic3r/GUI/Tab.cpp:1224
 msgid "Detach from system preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:982
+#: src/slic3r/GUI/Tab.cpp:1237
 msgid ""
 "A copy of the current system preset will be created, which will be detached "
 "from the system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:983
+#: src/slic3r/GUI/Tab.cpp:1238
 msgid ""
 "The current custom preset will be detached from the parent system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:986
+#: src/slic3r/GUI/Tab.cpp:1241
 msgid "Modifications to the current profile will be saved."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:989
+#: src/slic3r/GUI/Tab.cpp:1244
 msgid ""
 "This action is not revertable.\n"
 "Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:991
+#: src/slic3r/GUI/Tab.cpp:1246
 msgid "Detach preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1017
+#: src/slic3r/GUI/Tab.cpp:1272
 msgid "This is a default preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1019
+#: src/slic3r/GUI/Tab.cpp:1274
 msgid "This is a system preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1021
+#: src/slic3r/GUI/Tab.cpp:1276
 msgid "Current preset is inherited from the default preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1023
+#: src/slic3r/GUI/Tab.cpp:1278
 msgid "Current preset is inherited from"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1027
+#: src/slic3r/GUI/Tab.cpp:1282
 msgid "It can't be deleted or modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1028
+#: src/slic3r/GUI/Tab.cpp:1283
 msgid ""
 "Any modifications should be saved as a new preset inherited from this one."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1029
+#: src/slic3r/GUI/Tab.cpp:1284
 msgid "To do that please specify a new name for the preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1033
+#: src/slic3r/GUI/Tab.cpp:1288
 msgid "Additional information:"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1039
+#: src/slic3r/GUI/Tab.cpp:1294
 msgid "printer model"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1047
+#: src/slic3r/GUI/Tab.cpp:1302
 msgid "default print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1050
+#: src/slic3r/GUI/Tab.cpp:1305
 msgid "default filament profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1064
+#: src/slic3r/GUI/Tab.cpp:1319
 msgid "default SLA material profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1068
+#: src/slic3r/GUI/Tab.cpp:1323
 msgid "default SLA print profile"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1076
+#: src/slic3r/GUI/Tab.cpp:1331
 msgid "full profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1077
+#: src/slic3r/GUI/Tab.cpp:1332
 msgid "symbolic profile name"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1115 src/slic3r/GUI/Tab.cpp:3665
+#: src/slic3r/GUI/Tab.cpp:1370 src/slic3r/GUI/Tab.cpp:4008
 msgid "Layers and perimeters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1120
+#: src/slic3r/GUI/Tab.cpp:1375
 msgid "Vertical shells"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1131
+#: src/slic3r/GUI/Tab.cpp:1386
 msgid "Horizontal shells"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1132 src/libslic3r/PrintConfig.cpp:1787
+#: src/slic3r/GUI/Tab.cpp:1387 src/libslic3r/PrintConfig.cpp:1895
 msgid "Solid layers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1136
+#: src/slic3r/GUI/Tab.cpp:1391
 msgid "Minimum shell thickness"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1147
+#: src/slic3r/GUI/Tab.cpp:1402
 msgid "Quality (slower slicing)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1165
+#: src/slic3r/GUI/Tab.cpp:1426
 msgid "Reducing printing time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1177
+#: src/slic3r/GUI/Tab.cpp:1438
 msgid "Skirt and brim"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1195
+#: src/slic3r/GUI/Tab.cpp:1456
 msgid "Raft"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1199
+#: src/slic3r/GUI/Tab.cpp:1460
 msgid "Options for support material and raft"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1214
+#: src/slic3r/GUI/Tab.cpp:1475
 msgid "Speed for print moves"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1226
+#: src/slic3r/GUI/Tab.cpp:1488
 msgid "Speed for non-print moves"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1229
+#: src/slic3r/GUI/Tab.cpp:1491
 msgid "Modifiers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1232
+#: src/slic3r/GUI/Tab.cpp:1494
 msgid "Acceleration control (advanced)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1239
+#: src/slic3r/GUI/Tab.cpp:1501
 msgid "Autospeed (advanced)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1247
+#: src/slic3r/GUI/Tab.cpp:1509
 msgid "Multiple Extruders"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1255
+#: src/slic3r/GUI/Tab.cpp:1517
 msgid "Ooze prevention"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1273
+#: src/slic3r/GUI/Tab.cpp:1535
 msgid "Extrusion width"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1283
+#: src/slic3r/GUI/Tab.cpp:1545
 msgid "Overlap"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1286
+#: src/slic3r/GUI/Tab.cpp:1548
 msgid "Flow"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1295
+#: src/slic3r/GUI/Tab.cpp:1557
 msgid "Other"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1298 src/slic3r/GUI/Tab.cpp:3734
+#: src/slic3r/GUI/Tab.cpp:1560 src/slic3r/GUI/Tab.cpp:4084
 msgid "Output options"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1299
+#: src/slic3r/GUI/Tab.cpp:1561
 msgid "Sequential printing"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1301
+#: src/slic3r/GUI/Tab.cpp:1563
 msgid "Extruder clearance (mm)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1306 src/slic3r/GUI/Tab.cpp:3735
+#: src/slic3r/GUI/Tab.cpp:1568 src/slic3r/GUI/Tab.cpp:4085
 msgid "Output file"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1313 src/libslic3r/PrintConfig.cpp:1453
+#: src/slic3r/GUI/Tab.cpp:1575 src/libslic3r/PrintConfig.cpp:1561
 msgid "Post-processing scripts"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1319 src/slic3r/GUI/Tab.cpp:1320
-#: src/slic3r/GUI/Tab.cpp:1606 src/slic3r/GUI/Tab.cpp:1607
-#: src/slic3r/GUI/Tab.cpp:2045 src/slic3r/GUI/Tab.cpp:2046
-#: src/slic3r/GUI/Tab.cpp:2127 src/slic3r/GUI/Tab.cpp:2128
-#: src/slic3r/GUI/Tab.cpp:3608 src/slic3r/GUI/Tab.cpp:3609
+#: src/slic3r/GUI/Tab.cpp:1581 src/slic3r/GUI/Tab.cpp:1582
+#: src/slic3r/GUI/Tab.cpp:1887 src/slic3r/GUI/Tab.cpp:1888
+#: src/slic3r/GUI/Tab.cpp:2221 src/slic3r/GUI/Tab.cpp:2222
+#: src/slic3r/GUI/Tab.cpp:2297 src/slic3r/GUI/Tab.cpp:2298
+#: src/slic3r/GUI/Tab.cpp:3951 src/slic3r/GUI/Tab.cpp:3952
 msgid "Notes"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1326 src/slic3r/GUI/Tab.cpp:1614
-#: src/slic3r/GUI/Tab.cpp:2052 src/slic3r/GUI/Tab.cpp:2134
-#: src/slic3r/GUI/Tab.cpp:3616 src/slic3r/GUI/Tab.cpp:3740
+#: src/slic3r/GUI/Tab.cpp:1588 src/slic3r/GUI/Tab.cpp:1895
+#: src/slic3r/GUI/Tab.cpp:2228 src/slic3r/GUI/Tab.cpp:2304
+#: src/slic3r/GUI/Tab.cpp:3959 src/slic3r/GUI/Tab.cpp:4090
 msgid "Dependencies"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1327 src/slic3r/GUI/Tab.cpp:1615
-#: src/slic3r/GUI/Tab.cpp:2053 src/slic3r/GUI/Tab.cpp:2135
-#: src/slic3r/GUI/Tab.cpp:3617 src/slic3r/GUI/Tab.cpp:3741
+#: src/slic3r/GUI/Tab.cpp:1589 src/slic3r/GUI/Tab.cpp:1896
+#: src/slic3r/GUI/Tab.cpp:2229 src/slic3r/GUI/Tab.cpp:2305
+#: src/slic3r/GUI/Tab.cpp:3960 src/slic3r/GUI/Tab.cpp:4091
 msgid "Profile dependencies"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1389 src/slic3r/GUI/Tab.cpp:1444
+#: src/slic3r/GUI/Tab.cpp:1669
 msgid "Filament Overrides"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1390 src/slic3r/GUI/Tab.cpp:1449
-#: src/slic3r/GUI/Tab.cpp:2365
-msgid "Retraction"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1499 src/libslic3r/PrintConfig.cpp:2074
+#: src/slic3r/GUI/Tab.cpp:1779
 msgid "Temperature"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1505
+#: src/slic3r/GUI/Tab.cpp:1785
 msgid "Bed"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1510
+#: src/slic3r/GUI/Tab.cpp:1790
 msgid "Cooling"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1511 src/libslic3r/PrintConfig.cpp:1355
-#: src/libslic3r/PrintConfig.cpp:2207
+#: src/slic3r/GUI/Tab.cpp:1791 src/libslic3r/PrintConfig.cpp:1463
+#: src/libslic3r/PrintConfig.cpp:2343
 msgid "Enable"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1522
+#: src/slic3r/GUI/Tab.cpp:1802
 msgid "Fan settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1531
+#: src/slic3r/GUI/Tab.cpp:1811
 msgid "Cooling thresholds"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1537
+#: src/slic3r/GUI/Tab.cpp:1817
 msgid "Filament properties"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1544
+#: src/slic3r/GUI/Tab.cpp:1824
 msgid "Print speed override"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1554
+#: src/slic3r/GUI/Tab.cpp:1834
 msgid "Wipe tower parameters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1557
+#: src/slic3r/GUI/Tab.cpp:1837
 msgid "Toolchange parameters with single extruder MM printers"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1571
+#: src/slic3r/GUI/Tab.cpp:1850
 msgid "Ramming settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1593 src/slic3r/GUI/Tab.cpp:2008
+#: src/slic3r/GUI/Tab.cpp:1872 src/slic3r/GUI/Tab.cpp:2160
+#: src/libslic3r/PrintConfig.cpp:1978
 msgid "Custom G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1594 src/slic3r/GUI/Tab.cpp:2009
-#: src/libslic3r/PrintConfig.cpp:1820 src/libslic3r/PrintConfig.cpp:1835
+#: src/slic3r/GUI/Tab.cpp:1873 src/slic3r/GUI/Tab.cpp:2161
+#: src/libslic3r/PrintConfig.cpp:1928 src/libslic3r/PrintConfig.cpp:1943
 msgid "Start G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1600 src/slic3r/GUI/Tab.cpp:2015
-#: src/libslic3r/PrintConfig.cpp:385 src/libslic3r/PrintConfig.cpp:395
+#: src/slic3r/GUI/Tab.cpp:1880 src/slic3r/GUI/Tab.cpp:2168
+#: src/libslic3r/PrintConfig.cpp:419 src/libslic3r/PrintConfig.cpp:429
 msgid "End G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1649
+#: src/slic3r/GUI/Tab.cpp:1930
 msgid "Volumetric flow hints not available"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1735 src/slic3r/GUI/Tab.cpp:1948
-msgid "Test"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1744
-msgid "Could not get a valid Printer Host reference"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1750 src/slic3r/GUI/Tab.cpp:1961
-msgid "Success!"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1770
+#: src/slic3r/GUI/Tab.cpp:2026
 msgid ""
-"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
-"signed certificate."
+"Note: All parameters from this group are moved to the Physical Printer "
+"settings (see changelog).\n"
+"\n"
+"A new Physical Printer profile is created by clicking on the \"cog\" icon "
+"right of the Printer profiles combo box, by selecting the \"add or remove "
+"printers\" item in the Printer combo box. The Physical Printer profile "
+"editor opens also when clicking on the \"cog\" icon in the Printer settings "
+"tab. The Physical Printer profiles are being stored into PrusaSlicer/"
+"physical_printer directory."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1785
-msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1786
-msgid "Open CA certificate file"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1813 src/libslic3r/PrintConfig.cpp:111
-msgid "HTTPS CA File"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1814
-#, possible-c-format
-msgid ""
-"On this system, %s uses HTTPS certificates from the system Certificate Store "
-"or Keychain."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1815
-msgid ""
-"To use a custom CA file, please import your CA file into Certificate Store / "
-"Keychain."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1858 src/slic3r/GUI/Tab.cpp:2070
+#: src/slic3r/GUI/Tab.cpp:2059 src/slic3r/GUI/Tab.cpp:2241
 msgid "Size and coordinates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1867
+#: src/slic3r/GUI/Tab.cpp:2068 src/slic3r/GUI/UnsavedChangesDialog.cpp:1066
 msgid "Capabilities"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1872
+#: src/slic3r/GUI/Tab.cpp:2073
 msgid "Number of extruders of the printer."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1900
+#: src/slic3r/GUI/Tab.cpp:2101
 msgid ""
 "Single Extruder Multi Material is selected, \n"
 "and all extruders must have the same diameter.\n"
@@ -5474,256 +6528,227 @@ msgid ""
 "nozzle diameter value?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1903 src/slic3r/GUI/Tab.cpp:2335
-#: src/libslic3r/PrintConfig.cpp:1326
+#: src/slic3r/GUI/Tab.cpp:2104 src/slic3r/GUI/Tab.cpp:2509
+#: src/libslic3r/PrintConfig.cpp:1434
 msgid "Nozzle diameter"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:1933
-msgid "USB/Serial connection"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1934 src/libslic3r/PrintConfig.cpp:1661
-msgid "Serial port"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1939
-msgid "Rescan serial ports"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1961
-msgid "Connection to printer works correctly."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1964
-msgid "Connection failed."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:1977 src/slic3r/GUI/Tab.cpp:2122
-msgid "Print Host upload"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2021 src/libslic3r/PrintConfig.cpp:153
+#: src/slic3r/GUI/Tab.cpp:2175 src/libslic3r/PrintConfig.cpp:187
 msgid "Before layer change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2027 src/libslic3r/PrintConfig.cpp:1080
+#: src/slic3r/GUI/Tab.cpp:2182 src/libslic3r/PrintConfig.cpp:1173
 msgid "After layer change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2033 src/libslic3r/PrintConfig.cpp:2100
+#: src/slic3r/GUI/Tab.cpp:2189 src/libslic3r/PrintConfig.cpp:2236
 msgid "Tool change G-code"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2039
+#: src/slic3r/GUI/Tab.cpp:2196
 msgid "Between objects G-code (for sequential printing)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2077
+#: src/slic3r/GUI/Tab.cpp:2203
+msgid "Color Change G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2209 src/libslic3r/PrintConfig.cpp:1969
+msgid "Pause Print G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2215
+msgid "Template Custom G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2248
 msgid "Display"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2092
+#: src/slic3r/GUI/Tab.cpp:2263
 msgid "Tilt"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2093
+#: src/slic3r/GUI/Tab.cpp:2264
 msgid "Tilt time"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2099 src/slic3r/GUI/Tab.cpp:3592
+#: src/slic3r/GUI/Tab.cpp:2270 src/slic3r/GUI/Tab.cpp:3935
 msgid "Corrections"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2116 src/slic3r/GUI/Tab.cpp:3588
+#: src/slic3r/GUI/Tab.cpp:2287 src/slic3r/GUI/Tab.cpp:3931
 msgid "Exposure"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2183 src/slic3r/GUI/Tab.cpp:2268
-#: src/libslic3r/PrintConfig.cpp:1129 src/libslic3r/PrintConfig.cpp:1146
-#: src/libslic3r/PrintConfig.cpp:1163 src/libslic3r/PrintConfig.cpp:1179
-#: src/libslic3r/PrintConfig.cpp:1189 src/libslic3r/PrintConfig.cpp:1199
-#: src/libslic3r/PrintConfig.cpp:1209
+#: src/slic3r/GUI/Tab.cpp:2346 src/slic3r/GUI/Tab.cpp:2442
+#: src/libslic3r/PrintConfig.cpp:1202 src/libslic3r/PrintConfig.cpp:1237
+#: src/libslic3r/PrintConfig.cpp:1254 src/libslic3r/PrintConfig.cpp:1271
+#: src/libslic3r/PrintConfig.cpp:1287 src/libslic3r/PrintConfig.cpp:1297
+#: src/libslic3r/PrintConfig.cpp:1307 src/libslic3r/PrintConfig.cpp:1317
 msgid "Machine limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2197
+#: src/slic3r/GUI/Tab.cpp:2371
 msgid "Values in this column are for Normal mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2198
-msgid "Normal"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2203
+#: src/slic3r/GUI/Tab.cpp:2377
 msgid "Values in this column are for Stealth mode"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2204
-msgid "Stealth"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2212
+#: src/slic3r/GUI/Tab.cpp:2386
 msgid "Maximum feedrates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2217
+#: src/slic3r/GUI/Tab.cpp:2391
 msgid "Maximum accelerations"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2224
+#: src/slic3r/GUI/Tab.cpp:2398
 msgid "Jerk limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2229
+#: src/slic3r/GUI/Tab.cpp:2403
 msgid "Minimum feedrates"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2293 src/slic3r/GUI/Tab.cpp:2301
+#: src/slic3r/GUI/Tab.cpp:2467 src/slic3r/GUI/Tab.cpp:2475
 msgid "Single extruder MM setup"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2302
+#: src/slic3r/GUI/Tab.cpp:2476
 msgid "Single extruder multimaterial parameters"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2333
+#: src/slic3r/GUI/Tab.cpp:2507
 msgid ""
 "This is a single extruder multimaterial printer, diameters of all extruders "
 "will be set to the new value. Do you want to proceed?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2357
+#: src/slic3r/GUI/Tab.cpp:2531
 msgid "Layer height limits"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2362
+#: src/slic3r/GUI/Tab.cpp:2536
 msgid "Position (for multi-extruder printers)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2368
+#: src/slic3r/GUI/Tab.cpp:2542
 msgid "Only lift Z"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2381
+#: src/slic3r/GUI/Tab.cpp:2555
 msgid ""
 "Retraction when tool is disabled (advanced settings for multi-extruder "
 "setups)"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2389
+#: src/slic3r/GUI/Tab.cpp:2564
 msgid "Reset to Filament Color"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2570
+#: src/slic3r/GUI/Tab.cpp:2731
 msgid ""
 "The Wipe option is not available when using the Firmware Retraction mode.\n"
 "\n"
 "Shall I disable it in order to enable Firmware Retraction?"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2572
+#: src/slic3r/GUI/Tab.cpp:2733
 msgid "Firmware Retraction"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:2918
-#, possible-c-format
-msgid "Default preset (%s)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2919
-#, possible-c-format
-msgid "Preset (%s)"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2936
-msgid "has the following unsaved changes:"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2939
-msgid "is not compatible with printer"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2940
-msgid "is not compatible with print profile"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2942
-msgid "and it has the following unsaved changes:"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:2946
-msgid "Unsaved Changes"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3040
+#: src/slic3r/GUI/Tab.cpp:3323
 msgid "Detached"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3040
-msgctxt "PresetName"
-msgid "Copy"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3069
-msgid "The supplied name is empty. It can't be saved."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3074
-msgid "Cannot overwrite a system profile."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3078
-msgid "Cannot overwrite an external profile."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3083
-msgid "Preset with name \"%1%\" already exists."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3084
-msgid "Replace?"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3152
+#: src/slic3r/GUI/Tab.cpp:3386
 msgid "remove"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3152
+#: src/slic3r/GUI/Tab.cpp:3386
 msgid "delete"
 msgstr ""
 
-#. TRN  remove/delete
-#: src/slic3r/GUI/Tab.cpp:3154
+#: src/slic3r/GUI/Tab.cpp:3392
+msgid ""
+"Are you sure you want to delete \"%1%\" preset from the physical printer "
+"\"%2%\"?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3404
+msgid "Next physical printer(s) has/have selected preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3408
+msgid ""
+"Note, that selected preset will be deleted from this/those printer(s) too."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3412
+msgid "Next physical printer(s) has/have one and only selected preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3416
+msgid ""
+"Note, that this/those printer(s) will be deleted after deleting of the "
+"selected preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3420
 msgid "Are you sure you want to %1% the selected preset?"
 msgstr ""
 
 #. TRN  Remove/Delete
-#: src/slic3r/GUI/Tab.cpp:3157
+#: src/slic3r/GUI/Tab.cpp:3425
 msgid "%1% Preset"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3216 src/slic3r/GUI/Tab.cpp:3286
+#: src/slic3r/GUI/Tab.cpp:3435
+msgid "It's a last for this physical printer. We can't delete it"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3509 src/slic3r/GUI/Tab.cpp:3588
 msgid "Set"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3325
+#: src/slic3r/GUI/Tab.cpp:3660
+msgid ""
+"Machine limits will be emitted to G-code and used to estimate print time."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3663
+msgid ""
+"Machine limits will NOT be emitted to G-code, however they will be used to "
+"estimate print time, which may therefore not be accurate as the printer may "
+"apply a different set of machine limits."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3667
+msgid ""
+"Machine limits are not set, therefore the print time estimate may not be "
+"accurate."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3689
 msgid "LOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "LOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:3327
+#: src/slic3r/GUI/Tab.cpp:3691
 msgid ""
 "indicates that the settings are the same as the system (or default) values "
 "for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3329
+#: src/slic3r/GUI/Tab.cpp:3693
 msgid "UNLOCKED LOCK"
 msgstr ""
 
 #. TRN Description for "UNLOCKED LOCK"
-#: src/slic3r/GUI/Tab.cpp:3331
+#: src/slic3r/GUI/Tab.cpp:3695
 msgid ""
 "indicates that some settings were changed and are not equal to the system "
 "(or default) values for the current option group.\n"
@@ -5731,23 +6756,23 @@ msgid ""
 "to the system (or default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3336
+#: src/slic3r/GUI/Tab.cpp:3700
 msgid "WHITE BULLET"
 msgstr ""
 
 #. TRN Description for "WHITE BULLET"
-#: src/slic3r/GUI/Tab.cpp:3338
+#: src/slic3r/GUI/Tab.cpp:3702
 msgid ""
 "for the left button: indicates a non-system (or non-default) preset,\n"
 "for the right button: indicates that the settings hasn't been modified."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3341
+#: src/slic3r/GUI/Tab.cpp:3705
 msgid "BACK ARROW"
 msgstr ""
 
 #. TRN Description for "BACK ARROW"
-#: src/slic3r/GUI/Tab.cpp:3343
+#: src/slic3r/GUI/Tab.cpp:3707
 msgid ""
 "indicates that the settings were changed and are not equal to the last saved "
 "preset for the current option group.\n"
@@ -5755,13 +6780,13 @@ msgid ""
 "to the last saved preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3353
+#: src/slic3r/GUI/Tab.cpp:3717
 msgid ""
 "LOCKED LOCK icon indicates that the settings are the same as the system (or "
 "default) values for the current option group"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3355
+#: src/slic3r/GUI/Tab.cpp:3719
 msgid ""
 "UNLOCKED LOCK icon indicates that some settings were changed and are not "
 "equal to the system (or default) values for the current option group.\n"
@@ -5769,17 +6794,17 @@ msgid ""
 "default) values."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3358
+#: src/slic3r/GUI/Tab.cpp:3722
 msgid "WHITE BULLET icon indicates a non system (or non default) preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3361
+#: src/slic3r/GUI/Tab.cpp:3725
 msgid ""
 "WHITE BULLET icon indicates that the settings are the same as in the last "
 "saved preset for the current option group."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3363
+#: src/slic3r/GUI/Tab.cpp:3727
 msgid ""
 "BACK ARROW icon indicates that the settings were changed and are not equal "
 "to the last saved preset for the current option group.\n"
@@ -5787,84 +6812,197 @@ msgid ""
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3369
+#: src/slic3r/GUI/Tab.cpp:3733
 msgid ""
 "LOCKED LOCK icon indicates that the value is the same as the system (or "
 "default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3370
+#: src/slic3r/GUI/Tab.cpp:3734
 msgid ""
 "UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
 "the system (or default) value.\n"
 "Click to reset current value to the system (or default) value."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3376
+#: src/slic3r/GUI/Tab.cpp:3740
 msgid ""
 "WHITE BULLET icon indicates that the value is the same as in the last saved "
 "preset."
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3377
+#: src/slic3r/GUI/Tab.cpp:3741
 msgid ""
 "BACK ARROW icon indicates that the value was changed and is not equal to the "
 "last saved preset.\n"
 "Click to reset current value to the last saved preset."
 msgstr ""
 
-#. TRN Preset
-#: src/slic3r/GUI/Tab.cpp:3490
-#, possible-c-format
-msgid "Save %s as:"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3534
-msgid "the following suffix is not allowed:"
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3538
-msgid "The supplied name is not available."
-msgstr ""
-
-#: src/slic3r/GUI/Tab.cpp:3551 src/slic3r/GUI/Tab.cpp:3553
+#: src/slic3r/GUI/Tab.cpp:3894 src/slic3r/GUI/Tab.cpp:3896
 msgid "Material"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3675
+#: src/slic3r/GUI/Tab.cpp:4018
 msgid "Support head"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3680
+#: src/slic3r/GUI/Tab.cpp:4023
 msgid "Support pillar"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3696
+#: src/slic3r/GUI/Tab.cpp:4046
 msgid "Connection of the support sticks and junctions"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.cpp:3701
+#: src/slic3r/GUI/Tab.cpp:4051
 msgid "Automatic generation"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:336 src/slic3r/GUI/Tab.hpp:441
+#: src/slic3r/GUI/Tab.cpp:4125
+msgid ""
+"\"%1%\" is disabled because \"%2%\" is on in \"%3%\" category.\n"
+"To enable \"%1%\", please switch off \"%2%\""
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4127 src/libslic3r/PrintConfig.cpp:2917
+msgid "Object elevation"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:4127 src/libslic3r/PrintConfig.cpp:3019
+msgid "Pad around object"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:378 src/slic3r/GUI/Tab.hpp:502
 msgid "Print Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:363
+#: src/slic3r/GUI/Tab.hpp:409
 msgid "Filament Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:399
+#: src/slic3r/GUI/Tab.hpp:453
 msgid "Printer Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:426
+#: src/slic3r/GUI/Tab.hpp:486
 msgid "Material Settings"
 msgstr ""
 
-#: src/slic3r/GUI/Tab.hpp:453
-msgid "Save preset"
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:137
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:146
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:845
+msgid "Undef"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:525
+msgid "Closing PrusaSlicer: Unsaved Changes"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:542
+msgid "Switching Presets: Unsaved Changes"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:608
+msgid "Old Value"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:609
+msgid "New Value"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:640
+msgid "Transfer"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:641
+msgid "Discard"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:642
+msgid "Save"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:662
+msgid "PrusaSlicer will remember your action."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:664
+msgid ""
+"You will not be asked about the unsaved changes the next time you close "
+"PrusaSlicer."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:665
+msgid ""
+"You will not be asked about the unsaved changes the next time you switch a "
+"preset."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:666
+msgid ""
+"Visit \"Preferences\" and check \"%1%\"\n"
+"to be asked about unsaved changes again."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:668
+msgid "PrusaSlicer: Don't ask me again"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:735
+msgid ""
+"Some fields are too long to fit. Right mouse click reveals the full text."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:737
+msgid "All modified options will be reverted."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
+msgid "Save the selected options."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:740
+msgid "Transfer the selected options to the newly selected presets."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:744
+msgid "Save the selected options to preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:745
+msgid "Transfer the selected options to the newly selected preset \"%1%\"."
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1004
+msgid "The following presets were modified:"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1009
+msgid "Preset \"%1%\" has the following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1013
+msgid ""
+"Preset \"%1%\" is not compatible with the new printer profile and it has the "
+"following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1014
+msgid ""
+"Preset \"%1%\" is not compatible with the new print profile and it has the "
+"following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1061
+msgid "Extruders count"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1177
+msgid "Old value"
+msgstr ""
+
+#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1178
+msgid "New value"
 msgstr ""
 
 #: src/slic3r/GUI/UpdateDialogs.cpp:38
@@ -6101,17 +7239,17 @@ msgstr ""
 msgid "Show advanced settings"
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:706
+#: src/slic3r/GUI/wxExtensions.cpp:623
 #, possible-c-format
 msgid "Switch to the %s mode"
 msgstr ""
 
-#: src/slic3r/GUI/wxExtensions.cpp:707
+#: src/slic3r/GUI/wxExtensions.cpp:624
 #, possible-c-format
 msgid "Current mode is %s"
 msgstr ""
 
-#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:69
+#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:68
 #, possible-c-format
 msgid "Mismatched type of print host: %s"
 msgstr ""
@@ -6183,7 +7321,7 @@ msgid "Model fixing"
 msgstr ""
 
 #: src/slic3r/Utils/FixModelByWin10.cpp:341
-msgid "Exporting model..."
+msgid "Exporting model"
 msgstr ""
 
 #: src/slic3r/Utils/FixModelByWin10.cpp:368
@@ -6249,188 +7387,86 @@ msgid ""
 "is required."
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:84
+#: src/slic3r/Utils/OctoPrint.cpp:83
 msgid "Connection to OctoPrint works correctly."
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:90
+#: src/slic3r/Utils/OctoPrint.cpp:89
 msgid "Could not connect to OctoPrint"
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:92
+#: src/slic3r/Utils/OctoPrint.cpp:91
 msgid "Note: OctoPrint version at least 1.1.0 is required."
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:179
+#: src/slic3r/Utils/OctoPrint.cpp:185
 msgid "Connection to Prusa SL1 works correctly."
 msgstr ""
 
-#: src/slic3r/Utils/OctoPrint.cpp:185
+#: src/slic3r/Utils/OctoPrint.cpp:191
 msgid "Could not connect to Prusa SLA"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:706
+#: src/slic3r/Utils/PresetUpdater.cpp:726
 #, possible-c-format
 msgid "requires min. %s and max. %s"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:710
+#: src/slic3r/Utils/PresetUpdater.cpp:730
 #, possible-c-format
 msgid "requires min. %s"
 msgstr ""
 
-#: src/slic3r/Utils/PresetUpdater.cpp:713
+#: src/slic3r/Utils/PresetUpdater.cpp:733
 #, possible-c-format
 msgid "requires max. %s"
 msgstr ""
 
-#: src/libslic3r/SLA/Pad.cpp:691
-msgid "Pad brim size is too small for the current configuration."
+#: src/slic3r/Utils/Http.cpp:73
+msgid ""
+"Could not detect system SSL certificate store. PrusaSlicer will be unable to "
+"establish secure network connections."
 msgstr ""
 
-#: src/libslic3r/Zipper.cpp:32
-msgid "undefined error"
+#: src/slic3r/Utils/Http.cpp:78
+msgid "PrusaSlicer detected system SSL certificate store in: %1%"
 msgstr ""
 
-#: src/libslic3r/Zipper.cpp:34
-msgid "too many files"
+#: src/slic3r/Utils/Http.cpp:82
+msgid ""
+"To specify the system certificate store manually, please set the %1% "
+"environment variable to the correct CA bundle and restart the application."
 msgstr ""
 
-#: src/libslic3r/Zipper.cpp:36
-msgid "file too large"
+#: src/slic3r/Utils/Http.cpp:91
+msgid ""
+"CURL init has failed. PrusaSlicer will be unable to establish network "
+"connections. See logs for additional details."
 msgstr ""
 
-#: src/libslic3r/Zipper.cpp:38
-msgid "unsupported method"
+#: src/slic3r/Utils/Process.cpp:151
+msgid "Open G-code file:"
 msgstr ""
 
-#: src/libslic3r/Zipper.cpp:40
-msgid "unsupported encryption"
+#: src/libslic3r/GCode.cpp:604
+msgid "There is an object with no extrusions on the first layer."
 msgstr ""
 
-#: src/libslic3r/Zipper.cpp:42
-msgid "unsupported feature"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:44
-msgid "failed finding central directory"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:46
-msgid "not a ZIP archive"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:48
-msgid "invalid header or archive is corrupted"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:50
-msgid "unsupported multidisk archive"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:52
-msgid "decompression failed or archive is corrupted"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:54
-msgid "compression failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:56
-msgid "unexpected decompressed size"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:58
-msgid "CRC-32 check failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:60
-msgid "unsupported central directory size"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:62
-msgid "allocation failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:64
-msgid "file open failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:66
-msgid "file create failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:68
-msgid "file write failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:70
-msgid "file read failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:72
-msgid "file close failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:74
-msgid "file seek failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:76
-msgid "file stat failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:78
-msgid "invalid parameter"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:80
-msgid "invalid filename"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:82
-msgid "buffer too small"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:84
-msgid "internal error"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:86
-msgid "file not found"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:88
-msgid "archive is too large"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:90
-msgid "validation failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:92
-msgid "write calledback failed"
-msgstr ""
-
-#: src/libslic3r/Zipper.cpp:102
-msgid "Error with zip archive"
-msgstr ""
-
-#: src/libslic3r/GCode.cpp:637
+#: src/libslic3r/GCode.cpp:622
 msgid "Empty layers detected, the output would not be printable."
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:638
+#: src/libslic3r/GCode.cpp:623
 msgid "Print z"
 msgstr ""
 
-#: src/libslic3r/GCode.cpp:639
+#: src/libslic3r/GCode.cpp:624
 msgid ""
 "This is usually caused by negligibly small extrusions or by a faulty model. "
 "Try to repair the model or change its orientation on the bed."
 msgstr ""
 
-#: src/libslic3r/ExtrusionEntity.cpp:323
+#: src/libslic3r/ExtrusionEntity.cpp:328 src/libslic3r/ExtrusionEntity.cpp:364
 msgid "Mixed"
 msgstr ""
 
@@ -6439,122 +7475,254 @@ msgid ""
 "Cannot calculate extrusion width for %1%: Variable \"%2%\" not accessible."
 msgstr ""
 
-#: src/libslic3r/Format/3mf.cpp:1626
+#: src/libslic3r/Format/3mf.cpp:1667
 msgid ""
 "The selected 3mf file has been saved with a newer version of %1% and is not "
 "compatible."
 msgstr ""
 
-#: src/libslic3r/Format/AMF.cpp:934
+#: src/libslic3r/Format/AMF.cpp:955
 msgid ""
 "The selected amf file has been saved with a newer version of %1% and is not "
 "compatible."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1218
+#: src/libslic3r/miniz_extension.cpp:91
+msgid "undefined error"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:93
+msgid "too many files"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:95
+msgid "file too large"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:97
+msgid "unsupported method"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:99
+msgid "unsupported encryption"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:101
+msgid "unsupported feature"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:103
+msgid "failed finding central directory"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:105
+msgid "not a ZIP archive"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:107
+msgid "invalid header or archive is corrupted"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:109
+msgid "unsupported multidisk archive"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:111
+msgid "decompression failed or archive is corrupted"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:113
+msgid "compression failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:115
+msgid "unexpected decompressed size"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:117
+msgid "CRC-32 check failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:119
+msgid "unsupported central directory size"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:121
+msgid "allocation failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:123
+msgid "file open failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:125
+msgid "file create failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:127
+msgid "file write failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:129
+msgid "file read failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:131
+msgid "file close failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:133
+msgid "file seek failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:135
+msgid "file stat failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:137
+msgid "invalid parameter"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:139
+msgid "invalid filename"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:141
+msgid "buffer too small"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:143
+msgid "internal error"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:145
+msgid "file not found"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:147
+msgid "archive is too large"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:149
+msgid "validation failed"
+msgstr ""
+
+#: src/libslic3r/miniz_extension.cpp:151
+msgid "write calledback failed"
+msgstr ""
+
+#: src/libslic3r/Preset.cpp:1301
+msgid "filament"
+msgstr ""
+
+#: src/libslic3r/Preset.cpp:1302
+msgid "SLA print"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1245
 msgid "All objects are outside of the print volume."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1221
+#: src/libslic3r/Print.cpp:1248
 msgid "The supplied settings will cause an empty print."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1225
+#: src/libslic3r/Print.cpp:1252
 msgid "Some objects are too close; your extruder will collide with them."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1227
+#: src/libslic3r/Print.cpp:1254
 msgid ""
 "Some objects are too tall and cannot be printed without extruder collisions."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1236
+#: src/libslic3r/Print.cpp:1263
 msgid "The Spiral Vase option can only be used when printing a single object."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1243
+#: src/libslic3r/Print.cpp:1270
 msgid ""
 "The Spiral Vase option can only be used when printing single material "
 "objects."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1256
+#: src/libslic3r/Print.cpp:1283
 msgid ""
 "The wipe tower is only supported if all extruders have the same nozzle "
 "diameter and use filaments of the same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1261
+#: src/libslic3r/Print.cpp:1288
 msgid ""
 "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
 "and Repetier G-code flavors."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1263
+#: src/libslic3r/Print.cpp:1290
 msgid ""
 "The Wipe Tower is currently only supported with the relative extruder "
 "addressing (use_relative_e_distances=1)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1265
+#: src/libslic3r/Print.cpp:1292
 msgid "Ooze prevention is currently not supported with the wipe tower enabled."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1267
+#: src/libslic3r/Print.cpp:1294
 msgid ""
 "The Wipe Tower currently does not support volumetric E (use_volumetric_e=0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1269
+#: src/libslic3r/Print.cpp:1296
 msgid ""
 "The Wipe Tower is currently not supported for multimaterial sequential "
 "prints."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1290
+#: src/libslic3r/Print.cpp:1317
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they have equal "
 "layer heights"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1292
+#: src/libslic3r/Print.cpp:1319
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "over an equal number of raft layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1294
+#: src/libslic3r/Print.cpp:1321
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are printed "
 "with the same support_material_contact_distance"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1296
+#: src/libslic3r/Print.cpp:1323
 msgid ""
 "The Wipe Tower is only supported for multiple objects if they are sliced "
 "equally."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1338
+#: src/libslic3r/Print.cpp:1365
 msgid ""
 "The Wipe tower is only supported if all objects have the same variable layer "
 "height"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1364
+#: src/libslic3r/Print.cpp:1391
 msgid ""
 "One or more object were assigned an extruder that the printer does not have."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1373
+#: src/libslic3r/Print.cpp:1400
 msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1376
+#: src/libslic3r/Print.cpp:1403
 msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1387
+#: src/libslic3r/Print.cpp:1414
 msgid ""
 "Printing with multiple extruders of differing nozzle diameters. If support "
 "is to be printed with the current extruder (support_material_extruder == 0 "
@@ -6562,13 +7730,13 @@ msgid ""
 "same diameter."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1395
+#: src/libslic3r/Print.cpp:1422
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers "
 "need to be synchronized with the object layers."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1399
+#: src/libslic3r/Print.cpp:1426
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only if they are "
 "printed with the current extruder without triggering a tool change. (both "
@@ -6576,132 +7744,136 @@ msgid ""
 "set to 0)."
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1421
+#: src/libslic3r/Print.cpp:1448
 msgid "First layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1426
+#: src/libslic3r/Print.cpp:1453
 msgid "Layer height can't be greater than nozzle diameter"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1583
+#: src/libslic3r/Print.cpp:1610
 msgid "Infilling layers"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1605
+#: src/libslic3r/Print.cpp:1636
 msgid "Generating skirt"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1613
+#: src/libslic3r/Print.cpp:1645
 msgid "Generating brim"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1633
+#: src/libslic3r/Print.cpp:1676
 msgid "Exporting G-code"
 msgstr ""
 
-#: src/libslic3r/Print.cpp:1637
+#: src/libslic3r/Print.cpp:1680
 msgid "Generating G-code"
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:615
+#: src/libslic3r/SLA/Pad.cpp:532
+msgid "Pad brim size is too small for the current configuration."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:627
 msgid ""
 "Cannot proceed without support points! Add support points or disable support "
 "generation."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:627
+#: src/libslic3r/SLAPrint.cpp:639
 msgid ""
 "Elevation is too low for object. Use the \"Pad around object\" feature to "
 "print the object without elevation."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:633
+#: src/libslic3r/SLAPrint.cpp:645
 msgid ""
 "The endings of the support pillars will be deployed on the gap between the "
 "object and the pad. 'Support base safety distance' has to be greater than "
 "the 'Pad object gap' parameter to avoid this."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:648
+#: src/libslic3r/SLAPrint.cpp:660
 msgid "Exposition time is out of printer profile bounds."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:655
+#: src/libslic3r/SLAPrint.cpp:667
 msgid "Initial exposition time is out of printer profile bounds."
 msgstr ""
 
-#: src/libslic3r/SLAPrint.cpp:762
+#: src/libslic3r/SLAPrint.cpp:780
 msgid "Slicing done"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:43
+#: src/libslic3r/SLAPrintSteps.cpp:44
 msgid "Hollowing model"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:44
+#: src/libslic3r/SLAPrintSteps.cpp:45
 msgid "Drilling holes into model."
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:45
+#: src/libslic3r/SLAPrintSteps.cpp:46
 msgid "Slicing model"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:46 src/libslic3r/SLAPrintSteps.cpp:356
+#: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:359
 msgid "Generating support points"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:47
+#: src/libslic3r/SLAPrintSteps.cpp:48
 msgid "Generating support tree"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:48
+#: src/libslic3r/SLAPrintSteps.cpp:49
 msgid "Generating pad"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:49
+#: src/libslic3r/SLAPrintSteps.cpp:50
 msgid "Slicing supports"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:64
+#: src/libslic3r/SLAPrintSteps.cpp:65
 msgid "Merging slices and calculating statistics"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:65
+#: src/libslic3r/SLAPrintSteps.cpp:66
 msgid "Rasterizing layers"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:190
-msgid "Too much overlapping holes."
+#: src/libslic3r/SLAPrintSteps.cpp:192
+msgid "Too many overlapping holes."
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:199
+#: src/libslic3r/SLAPrintSteps.cpp:201
 msgid ""
 "Drilling holes into the mesh failed. This is usually caused by broken model. "
 "Try to fix it first."
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:245
+#: src/libslic3r/SLAPrintSteps.cpp:247
 msgid ""
 "Slicing had to be stopped due to an internal error: Inconsistent slice index."
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:413 src/libslic3r/SLAPrintSteps.cpp:422
-#: src/libslic3r/SLAPrintSteps.cpp:461
+#: src/libslic3r/SLAPrintSteps.cpp:411 src/libslic3r/SLAPrintSteps.cpp:420
+#: src/libslic3r/SLAPrintSteps.cpp:459
 msgid "Visualizing supports"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:453
+#: src/libslic3r/SLAPrintSteps.cpp:451
 msgid "No pad can be generated for this model with the current configuration"
 msgstr ""
 
-#: src/libslic3r/SLAPrintSteps.cpp:621
+#: src/libslic3r/SLAPrintSteps.cpp:619
 msgid ""
 "There are unprintable objects. Try to adjust support settings to make the "
 "objects printable."
 msgstr ""
 
-#: src/libslic3r/PrintBase.cpp:71
+#: src/libslic3r/PrintBase.cpp:72
 msgid "Failed processing of the output_filename_format template."
 msgstr ""
 
@@ -6741,91 +7913,107 @@ msgid ""
 "printing."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:87
+#: src/libslic3r/PrintConfig.cpp:89
 msgid "Slice gap closing radius"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:89
+#: src/libslic3r/PrintConfig.cpp:91
 msgid ""
 "Cracks smaller than 2x gap closing radius are being filled during the "
 "triangle mesh slicing. The gap closing operation may reduce the final print "
 "resolution, therefore it is advisable to keep the value reasonably low."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:97
+#: src/libslic3r/PrintConfig.cpp:99
 msgid "Hostname, IP or URL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:98
+#: src/libslic3r/PrintConfig.cpp:100
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field should contain "
 "the hostname, IP address or URL of the printer host instance."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:104
+#: src/libslic3r/PrintConfig.cpp:106
 msgid "API Key / Password"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:105
+#: src/libslic3r/PrintConfig.cpp:107
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field should contain "
 "the API Key or the password required for authentication."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:112
+#: src/libslic3r/PrintConfig.cpp:114
 msgid ""
 "Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
 "in crt/pem format. If left blank, the default OS CA certificate repository "
 "is used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:118
+#: src/libslic3r/PrintConfig.cpp:120
 msgid "Elephant foot compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:120
+#: src/libslic3r/PrintConfig.cpp:122
 msgid ""
 "The first layer will be shrunk in the XY plane by the configured value to "
 "compensate for the 1st layer squish aka an Elephant Foot effect."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:136
+#: src/libslic3r/PrintConfig.cpp:138
+msgid "Password"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:144
+msgid "Printer preset name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:145
+msgid "Related printer preset name"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:150
+msgid "Authorization Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:169
 msgid "Avoid crossing perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:137
+#: src/libslic3r/PrintConfig.cpp:170
 msgid ""
 "Optimize travel moves in order to minimize the crossing of perimeters. This "
 "is mostly useful with Bowden extruders which suffer from oozing. This "
 "feature slows down both the print and the G-code generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:144 src/libslic3r/PrintConfig.cpp:2071
+#: src/libslic3r/PrintConfig.cpp:177 src/libslic3r/PrintConfig.cpp:2206
 msgid "Other layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:145
+#: src/libslic3r/PrintConfig.cpp:178
 msgid ""
 "Bed temperature for layers after the first one. Set this to zero to disable "
 "bed temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:147
+#: src/libslic3r/PrintConfig.cpp:181
 msgid "Bed temperature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:154
+#: src/libslic3r/PrintConfig.cpp:188
 msgid ""
 "This custom code is inserted at every layer change, right before the Z move. "
 "Note that you can use placeholder variables for all Slic3r settings as well "
 "as [layer_num] and [layer_z]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:164
+#: src/libslic3r/PrintConfig.cpp:198
 msgid "Between objects G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:165
+#: src/libslic3r/PrintConfig.cpp:199
 msgid ""
 "This code is inserted between objects when using sequential printing. By "
 "default extruder and bed temperature are reset using non-wait command; "
@@ -6835,80 +8023,81 @@ msgid ""
 "S[first_layer_temperature]\" command wherever you want."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:176
+#: src/libslic3r/PrintConfig.cpp:210
 msgid "Number of solid layers to generate on bottom surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:177
+#: src/libslic3r/PrintConfig.cpp:211
 msgid "Bottom solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:185
+#: src/libslic3r/PrintConfig.cpp:219
 msgid ""
 "The number of bottom solid layers is increased above bottom_solid_layers if "
 "necessary to satisfy minimum thickness of bottom shell."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:187
+#: src/libslic3r/PrintConfig.cpp:221
 msgid "Minimum bottom shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:193
+#: src/libslic3r/PrintConfig.cpp:227
 msgid "Bridge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:194
+#: src/libslic3r/PrintConfig.cpp:228
 msgid ""
 "This is the acceleration your printer will use for bridges. Set zero to "
 "disable acceleration control for bridges."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:196 src/libslic3r/PrintConfig.cpp:339
-#: src/libslic3r/PrintConfig.cpp:862 src/libslic3r/PrintConfig.cpp:984
-#: src/libslic3r/PrintConfig.cpp:1152 src/libslic3r/PrintConfig.cpp:1201
-#: src/libslic3r/PrintConfig.cpp:1211 src/libslic3r/PrintConfig.cpp:1403
+#: src/libslic3r/PrintConfig.cpp:230 src/libslic3r/PrintConfig.cpp:373
+#: src/libslic3r/PrintConfig.cpp:902 src/libslic3r/PrintConfig.cpp:1028
+#: src/libslic3r/PrintConfig.cpp:1260 src/libslic3r/PrintConfig.cpp:1309
+#: src/libslic3r/PrintConfig.cpp:1319 src/libslic3r/PrintConfig.cpp:1511
 msgid "mm/s²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:202
+#: src/libslic3r/PrintConfig.cpp:236
 msgid "Bridging angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:204
+#: src/libslic3r/PrintConfig.cpp:238
 msgid ""
 "Bridging angle override. If left to zero, the bridging angle will be "
 "calculated automatically. Otherwise the provided angle will be used for all "
 "bridges. Use 180° for zero angle."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:207 src/libslic3r/PrintConfig.cpp:780
-#: src/libslic3r/PrintConfig.cpp:1640 src/libslic3r/PrintConfig.cpp:1650
-#: src/libslic3r/PrintConfig.cpp:1901 src/libslic3r/PrintConfig.cpp:2056
-#: src/libslic3r/PrintConfig.cpp:2254 src/libslic3r/PrintConfig.cpp:2744
-#: src/libslic3r/PrintConfig.cpp:2865
+#: src/libslic3r/PrintConfig.cpp:241 src/libslic3r/PrintConfig.cpp:816
+#: src/libslic3r/PrintConfig.cpp:1748 src/libslic3r/PrintConfig.cpp:1758
+#: src/libslic3r/PrintConfig.cpp:2036 src/libslic3r/PrintConfig.cpp:2191
+#: src/libslic3r/PrintConfig.cpp:2390 src/libslic3r/PrintConfig.cpp:2891
+#: src/libslic3r/PrintConfig.cpp:3012
 msgid "°"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:213
+#: src/libslic3r/PrintConfig.cpp:247
 msgid "Bridges fan speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:214
+#: src/libslic3r/PrintConfig.cpp:248
 msgid "This fan speed is enforced during all bridges and overhangs."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:215 src/libslic3r/PrintConfig.cpp:792
-#: src/libslic3r/PrintConfig.cpp:1219 src/libslic3r/PrintConfig.cpp:1282
-#: src/libslic3r/PrintConfig.cpp:1532 src/libslic3r/PrintConfig.cpp:2432
-#: src/libslic3r/PrintConfig.cpp:2784
+#: src/libslic3r/PrintConfig.cpp:249 src/libslic3r/PrintConfig.cpp:828
+#: src/libslic3r/PrintConfig.cpp:1148 src/libslic3r/PrintConfig.cpp:1327
+#: src/libslic3r/PrintConfig.cpp:1390 src/libslic3r/PrintConfig.cpp:1640
+#: src/libslic3r/PrintConfig.cpp:2568 src/libslic3r/PrintConfig.cpp:2805
+#: src/libslic3r/PrintConfig.cpp:2931
 msgid "%"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:222
+#: src/libslic3r/PrintConfig.cpp:256
 msgid "Bridge flow ratio"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:224
+#: src/libslic3r/PrintConfig.cpp:258
 msgid ""
 "This factor affects the amount of plastic for bridging. You can decrease it "
 "slightly to pull the extrudates and prevent sagging, although default "
@@ -6916,83 +8105,84 @@ msgid ""
 "before tweaking this."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:234
+#: src/libslic3r/PrintConfig.cpp:268
 msgid "Bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:236
+#: src/libslic3r/PrintConfig.cpp:270
 msgid "Speed for printing bridges."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:237 src/libslic3r/PrintConfig.cpp:609
-#: src/libslic3r/PrintConfig.cpp:617 src/libslic3r/PrintConfig.cpp:626
-#: src/libslic3r/PrintConfig.cpp:634 src/libslic3r/PrintConfig.cpp:661
-#: src/libslic3r/PrintConfig.cpp:680 src/libslic3r/PrintConfig.cpp:922
-#: src/libslic3r/PrintConfig.cpp:1050 src/libslic3r/PrintConfig.cpp:1135
-#: src/libslic3r/PrintConfig.cpp:1169 src/libslic3r/PrintConfig.cpp:1181
-#: src/libslic3r/PrintConfig.cpp:1191 src/libslic3r/PrintConfig.cpp:1241
-#: src/libslic3r/PrintConfig.cpp:1300 src/libslic3r/PrintConfig.cpp:1433
-#: src/libslic3r/PrintConfig.cpp:1607 src/libslic3r/PrintConfig.cpp:1616
-#: src/libslic3r/PrintConfig.cpp:2035 src/libslic3r/PrintConfig.cpp:2161
+#: src/libslic3r/PrintConfig.cpp:271 src/libslic3r/PrintConfig.cpp:645
+#: src/libslic3r/PrintConfig.cpp:653 src/libslic3r/PrintConfig.cpp:662
+#: src/libslic3r/PrintConfig.cpp:670 src/libslic3r/PrintConfig.cpp:697
+#: src/libslic3r/PrintConfig.cpp:716 src/libslic3r/PrintConfig.cpp:966
+#: src/libslic3r/PrintConfig.cpp:1094 src/libslic3r/PrintConfig.cpp:1167
+#: src/libslic3r/PrintConfig.cpp:1243 src/libslic3r/PrintConfig.cpp:1277
+#: src/libslic3r/PrintConfig.cpp:1289 src/libslic3r/PrintConfig.cpp:1299
+#: src/libslic3r/PrintConfig.cpp:1349 src/libslic3r/PrintConfig.cpp:1408
+#: src/libslic3r/PrintConfig.cpp:1541 src/libslic3r/PrintConfig.cpp:1715
+#: src/libslic3r/PrintConfig.cpp:1724 src/libslic3r/PrintConfig.cpp:2170
+#: src/libslic3r/PrintConfig.cpp:2297
 msgid "mm/s"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:244
+#: src/libslic3r/PrintConfig.cpp:278
 msgid "Brim width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:245
+#: src/libslic3r/PrintConfig.cpp:279
 msgid ""
 "Horizontal width of the brim that will be printed around each object on the "
 "first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:252
+#: src/libslic3r/PrintConfig.cpp:286
 msgid "Clip multi-part objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:253
+#: src/libslic3r/PrintConfig.cpp:287
 msgid ""
 "When printing multi-material objects, this settings will make Slic3r to clip "
 "the overlapping object parts one by the other (2nd part will be clipped by "
 "the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:260
+#: src/libslic3r/PrintConfig.cpp:294
 msgid "Colorprint height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:261
+#: src/libslic3r/PrintConfig.cpp:295
 msgid "Heights at which a filament change is to occur."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:271
+#: src/libslic3r/PrintConfig.cpp:305
 msgid "Compatible printers condition"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:272
+#: src/libslic3r/PrintConfig.cpp:306
 msgid ""
 "A boolean expression using the configuration values of an active printer "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active printer profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:286
+#: src/libslic3r/PrintConfig.cpp:320
 msgid "Compatible print profiles condition"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:287
+#: src/libslic3r/PrintConfig.cpp:321
 msgid ""
 "A boolean expression using the configuration values of an active print "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active print profile."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:304
+#: src/libslic3r/PrintConfig.cpp:338
 msgid "Complete individual objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:305
+#: src/libslic3r/PrintConfig.cpp:339
 msgid ""
 "When printing multiple objects or copies, this feature will complete each "
 "object before moving onto next one (and starting it from its bottom layer). "
@@ -7000,97 +8190,97 @@ msgid ""
 "warn and prevent you from extruder collisions, but beware."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:313
+#: src/libslic3r/PrintConfig.cpp:347
 msgid "Enable auto cooling"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:314
+#: src/libslic3r/PrintConfig.cpp:348
 msgid ""
 "This flag enables the automatic cooling logic that adjusts print speed and "
 "fan speed according to layer printing time."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:319
+#: src/libslic3r/PrintConfig.cpp:353
 msgid "Cooling tube position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:320
+#: src/libslic3r/PrintConfig.cpp:354
 msgid "Distance of the center-point of the cooling tube from the extruder tip."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:327
+#: src/libslic3r/PrintConfig.cpp:361
 msgid "Cooling tube length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:328
+#: src/libslic3r/PrintConfig.cpp:362
 msgid "Length of the cooling tube to limit space for cooling moves inside it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:336
+#: src/libslic3r/PrintConfig.cpp:370
 msgid ""
 "This is the acceleration your printer will be reset to after the role-"
 "specific acceleration values are used (perimeter/infill). Set zero to "
 "prevent resetting acceleration at all."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:345
+#: src/libslic3r/PrintConfig.cpp:379
 msgid "Default filament profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:346
+#: src/libslic3r/PrintConfig.cpp:380
 msgid ""
 "Default filament profile associated with the current printer profile. On "
 "selection of the current printer profile, this filament profile will be "
 "activated."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:352
+#: src/libslic3r/PrintConfig.cpp:386
 msgid "Default print profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:353 src/libslic3r/PrintConfig.cpp:2599
-#: src/libslic3r/PrintConfig.cpp:2610
+#: src/libslic3r/PrintConfig.cpp:387 src/libslic3r/PrintConfig.cpp:2735
+#: src/libslic3r/PrintConfig.cpp:2746
 msgid ""
 "Default print profile associated with the current printer profile. On "
 "selection of the current printer profile, this print profile will be "
 "activated."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:359
+#: src/libslic3r/PrintConfig.cpp:393
 msgid "Disable fan for the first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:360
+#: src/libslic3r/PrintConfig.cpp:394
 msgid ""
 "You can set this to a positive value to disable fan at all during the first "
 "layers, so that it does not make adhesion worse."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:369
+#: src/libslic3r/PrintConfig.cpp:403
 msgid "Don't support bridges"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:371
+#: src/libslic3r/PrintConfig.cpp:405
 msgid ""
 "Experimental option for preventing support material from being generated "
 "under bridged areas."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:377
+#: src/libslic3r/PrintConfig.cpp:411
 msgid "Distance between copies"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:378
+#: src/libslic3r/PrintConfig.cpp:412
 msgid "Distance used for the auto-arrange feature of the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:386
+#: src/libslic3r/PrintConfig.cpp:420
 msgid ""
 "This end procedure is inserted at the end of the output file. Note that you "
 "can use placeholder variables for all PrusaSlicer settings."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:396
+#: src/libslic3r/PrintConfig.cpp:430
 msgid ""
 "This end procedure is inserted at the end of the output file, before the "
 "printer end gcode (and before any toolchange from this filament in case of "
@@ -7099,62 +8289,66 @@ msgid ""
 "in extruder order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:407
+#: src/libslic3r/PrintConfig.cpp:441
 msgid "Ensure vertical shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:409
+#: src/libslic3r/PrintConfig.cpp:443
 msgid ""
 "Add solid infill near sloping surfaces to guarantee the vertical shell "
 "thickness (top+bottom solid layers)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:415
+#: src/libslic3r/PrintConfig.cpp:449
 msgid "Top fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:417
+#: src/libslic3r/PrintConfig.cpp:451
 msgid ""
 "Fill pattern for top infill. This only affects the top visible layer, and "
 "not its adjacent solid shells."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:425 src/libslic3r/PrintConfig.cpp:843
-#: src/libslic3r/PrintConfig.cpp:2016
+#: src/libslic3r/PrintConfig.cpp:460 src/libslic3r/PrintConfig.cpp:881
+#: src/libslic3r/PrintConfig.cpp:2151
 msgid "Rectilinear"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:426 src/libslic3r/PrintConfig.cpp:849
+#: src/libslic3r/PrintConfig.cpp:461
+msgid "Monotonic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:462 src/libslic3r/PrintConfig.cpp:887
 msgid "Concentric"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:427 src/libslic3r/PrintConfig.cpp:853
+#: src/libslic3r/PrintConfig.cpp:463 src/libslic3r/PrintConfig.cpp:891
 msgid "Hilbert Curve"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:428 src/libslic3r/PrintConfig.cpp:854
+#: src/libslic3r/PrintConfig.cpp:464 src/libslic3r/PrintConfig.cpp:892
 msgid "Archimedean Chords"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:429 src/libslic3r/PrintConfig.cpp:855
+#: src/libslic3r/PrintConfig.cpp:465 src/libslic3r/PrintConfig.cpp:893
 msgid "Octagram Spiral"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:435
+#: src/libslic3r/PrintConfig.cpp:471
 msgid "Bottom fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:437
+#: src/libslic3r/PrintConfig.cpp:473
 msgid ""
 "Fill pattern for bottom infill. This only affects the bottom external "
 "visible layer, and not its adjacent solid shells."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:446 src/libslic3r/PrintConfig.cpp:457
+#: src/libslic3r/PrintConfig.cpp:482 src/libslic3r/PrintConfig.cpp:493
 msgid "External perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:448
+#: src/libslic3r/PrintConfig.cpp:484
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for external "
 "perimeters. If left zero, default extrusion width will be used if set, "
@@ -7162,43 +8356,43 @@ msgid ""
 "(for example 200%), it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:451 src/libslic3r/PrintConfig.cpp:560
-#: src/libslic3r/PrintConfig.cpp:882 src/libslic3r/PrintConfig.cpp:895
-#: src/libslic3r/PrintConfig.cpp:1015 src/libslic3r/PrintConfig.cpp:1041
-#: src/libslic3r/PrintConfig.cpp:1423 src/libslic3r/PrintConfig.cpp:1768
-#: src/libslic3r/PrintConfig.cpp:1890 src/libslic3r/PrintConfig.cpp:1958
-#: src/libslic3r/PrintConfig.cpp:2118
+#: src/libslic3r/PrintConfig.cpp:487 src/libslic3r/PrintConfig.cpp:596
+#: src/libslic3r/PrintConfig.cpp:924 src/libslic3r/PrintConfig.cpp:937
+#: src/libslic3r/PrintConfig.cpp:1059 src/libslic3r/PrintConfig.cpp:1085
+#: src/libslic3r/PrintConfig.cpp:1531 src/libslic3r/PrintConfig.cpp:1876
+#: src/libslic3r/PrintConfig.cpp:2025 src/libslic3r/PrintConfig.cpp:2093
+#: src/libslic3r/PrintConfig.cpp:2254
 msgid "mm or %"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:459
+#: src/libslic3r/PrintConfig.cpp:495
 msgid ""
 "This separate setting will affect the speed of external perimeters (the "
 "visible ones). If expressed as percentage (for example: 80%) it will be "
 "calculated on the perimeters speed setting above. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:462 src/libslic3r/PrintConfig.cpp:904
-#: src/libslic3r/PrintConfig.cpp:1727 src/libslic3r/PrintConfig.cpp:1779
-#: src/libslic3r/PrintConfig.cpp:2002 src/libslic3r/PrintConfig.cpp:2131
+#: src/libslic3r/PrintConfig.cpp:498 src/libslic3r/PrintConfig.cpp:946
+#: src/libslic3r/PrintConfig.cpp:1835 src/libslic3r/PrintConfig.cpp:1887
+#: src/libslic3r/PrintConfig.cpp:2137 src/libslic3r/PrintConfig.cpp:2267
 msgid "mm/s or %"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:469
+#: src/libslic3r/PrintConfig.cpp:505
 msgid "External perimeters first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:471
+#: src/libslic3r/PrintConfig.cpp:507
 msgid ""
 "Print contour perimeters from the outermost one to the innermost one instead "
 "of the default inverse order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:477
+#: src/libslic3r/PrintConfig.cpp:513
 msgid "Extra perimeters if needed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:479
+#: src/libslic3r/PrintConfig.cpp:515
 #, possible-c-format
 msgid ""
 "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
@@ -7206,14 +8400,14 @@ msgid ""
 "is supported."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:489
+#: src/libslic3r/PrintConfig.cpp:525
 msgid ""
 "The extruder to use (unless more specific extruder settings are specified). "
 "This value overrides perimeter and infill extruders, but not the support "
 "extruders."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:501
+#: src/libslic3r/PrintConfig.cpp:537
 msgid ""
 "Set this to the vertical distance between your nozzle tip and (usually) the "
 "X carriage rods. In other words, this is the height of the clearance "
@@ -7221,26 +8415,26 @@ msgid ""
 "extruder can peek before colliding with other printed objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:512
+#: src/libslic3r/PrintConfig.cpp:548
 msgid ""
 "Set this to the clearance radius around your extruder. If the extruder is "
 "not centered, choose the largest value for safety. This setting is used to "
 "check for collisions and to display the graphical preview in the plater."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:522
+#: src/libslic3r/PrintConfig.cpp:558
 msgid "Extruder Color"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:523 src/libslic3r/PrintConfig.cpp:583
+#: src/libslic3r/PrintConfig.cpp:559 src/libslic3r/PrintConfig.cpp:619
 msgid "This is only used in the Slic3r interface as a visual help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:529
+#: src/libslic3r/PrintConfig.cpp:565
 msgid "Extruder offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:530
+#: src/libslic3r/PrintConfig.cpp:566
 msgid ""
 "If your firmware doesn't handle the extruder displacement you need the G-"
 "code to take it into account. This option lets you specify the displacement "
@@ -7248,21 +8442,21 @@ msgid ""
 "coordinates (they will be subtracted from the XY coordinate)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:539
+#: src/libslic3r/PrintConfig.cpp:575
 msgid "Extrusion axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:540
+#: src/libslic3r/PrintConfig.cpp:576
 msgid ""
 "Use this option to set the axis letter associated to your printer's extruder "
 "(usually E but some printers use A)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:545
+#: src/libslic3r/PrintConfig.cpp:581
 msgid "Extrusion multiplier"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:546
+#: src/libslic3r/PrintConfig.cpp:582
 msgid ""
 "This factor changes the amount of flow proportionally. You may need to tweak "
 "this setting to get nice surface finish and correct single wall widths. "
@@ -7270,11 +8464,11 @@ msgid ""
 "more, check filament diameter and your firmware E steps."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:554
+#: src/libslic3r/PrintConfig.cpp:590
 msgid "Default extrusion width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:556
+#: src/libslic3r/PrintConfig.cpp:592
 msgid ""
 "Set this to a non-zero value to allow a manual extrusion width. If left to "
 "zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
@@ -7283,119 +8477,119 @@ msgid ""
 "height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:566
+#: src/libslic3r/PrintConfig.cpp:602
 msgid "Keep fan always on"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:567
+#: src/libslic3r/PrintConfig.cpp:603
 msgid ""
 "If this is enabled, fan will never be disabled and will be kept running at "
 "least at its minimum speed. Useful for PLA, harmful for ABS."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:572
+#: src/libslic3r/PrintConfig.cpp:608
 msgid "Enable fan if layer print time is below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:573
+#: src/libslic3r/PrintConfig.cpp:609
 msgid ""
 "If layer print time is estimated below this number of seconds, fan will be "
 "enabled and its speed will be calculated by interpolating the minimum and "
 "maximum speeds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:575 src/libslic3r/PrintConfig.cpp:1715
+#: src/libslic3r/PrintConfig.cpp:611 src/libslic3r/PrintConfig.cpp:1823
 msgid "approximate seconds"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:588
+#: src/libslic3r/PrintConfig.cpp:624
 msgid "Filament notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:589
+#: src/libslic3r/PrintConfig.cpp:625
 msgid "You can put your notes regarding the filament here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:597 src/libslic3r/PrintConfig.cpp:1247
+#: src/libslic3r/PrintConfig.cpp:633 src/libslic3r/PrintConfig.cpp:1355
 msgid "Max volumetric speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:598
+#: src/libslic3r/PrintConfig.cpp:634
 msgid ""
 "Maximum volumetric speed allowed for this filament. Limits the maximum "
 "volumetric speed of a print to the minimum of print and filament volumetric "
 "speed. Set to zero for no limit."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:607
+#: src/libslic3r/PrintConfig.cpp:643
 msgid "Loading speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:608
+#: src/libslic3r/PrintConfig.cpp:644
 msgid "Speed used for loading the filament on the wipe tower."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:615
+#: src/libslic3r/PrintConfig.cpp:651
 msgid "Loading speed at the start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:616
+#: src/libslic3r/PrintConfig.cpp:652
 msgid "Speed used at the very beginning of loading phase."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:623
+#: src/libslic3r/PrintConfig.cpp:659
 msgid "Unloading speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:624
+#: src/libslic3r/PrintConfig.cpp:660
 msgid ""
 "Speed used for unloading the filament on the wipe tower (does not affect  "
 "initial part of unloading just after ramming)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:632
+#: src/libslic3r/PrintConfig.cpp:668
 msgid "Unloading speed at the start"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:633
+#: src/libslic3r/PrintConfig.cpp:669
 msgid ""
 "Speed used for unloading the tip of the filament immediately after ramming."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:640
+#: src/libslic3r/PrintConfig.cpp:676
 msgid "Delay after unloading"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:641
+#: src/libslic3r/PrintConfig.cpp:677
 msgid ""
 "Time to wait after the filament is unloaded. May help to get reliable "
 "toolchanges with flexible materials that may need more time to shrink to "
 "original dimensions."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:650
+#: src/libslic3r/PrintConfig.cpp:686
 msgid "Number of cooling moves"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:651
+#: src/libslic3r/PrintConfig.cpp:687
 msgid ""
 "Filament is cooled by being moved back and forth in the cooling tubes. "
 "Specify desired number of these moves."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:659
+#: src/libslic3r/PrintConfig.cpp:695
 msgid "Speed of the first cooling move"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:660
+#: src/libslic3r/PrintConfig.cpp:696
 msgid "Cooling moves are gradually accelerating beginning at this speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:667
+#: src/libslic3r/PrintConfig.cpp:703
 msgid "Minimal purge on wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:668
+#: src/libslic3r/PrintConfig.cpp:704
 msgid ""
 "After a tool change, the exact position of the newly loaded filament inside "
 "the nozzle may not be known, and the filament pressure is likely not yet "
@@ -7404,63 +8598,63 @@ msgid ""
 "to produce successive infill or sacrificial object extrusions reliably."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:672
+#: src/libslic3r/PrintConfig.cpp:708
 msgid "mm³"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:678
+#: src/libslic3r/PrintConfig.cpp:714
 msgid "Speed of the last cooling move"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:679
+#: src/libslic3r/PrintConfig.cpp:715
 msgid "Cooling moves are gradually accelerating towards this speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:686
+#: src/libslic3r/PrintConfig.cpp:722
 msgid "Filament load time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:687
+#: src/libslic3r/PrintConfig.cpp:723
 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
 "filament during a tool change (when executing the T code). This time is "
 "added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:694
+#: src/libslic3r/PrintConfig.cpp:730
 msgid "Ramming parameters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:695
+#: src/libslic3r/PrintConfig.cpp:731
 msgid ""
 "This string is edited by RammingDialog and contains ramming specific "
 "parameters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:701
+#: src/libslic3r/PrintConfig.cpp:737
 msgid "Filament unload time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:702
+#: src/libslic3r/PrintConfig.cpp:738
 msgid ""
 "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
 "filament during a tool change (when executing the T code). This time is "
 "added to the total print time by the G-code time estimator."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:710
+#: src/libslic3r/PrintConfig.cpp:746
 msgid ""
 "Enter your filament diameter here. Good precision is required, so use a "
 "caliper and do multiple measurements along the filament, then compute the "
 "average."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:717 src/libslic3r/PrintConfig.cpp:2510
-#: src/libslic3r/PrintConfig.cpp:2511
+#: src/libslic3r/PrintConfig.cpp:753 src/libslic3r/PrintConfig.cpp:2646
+#: src/libslic3r/PrintConfig.cpp:2647
 msgid "Density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:718
+#: src/libslic3r/PrintConfig.cpp:754
 msgid ""
 "Enter your filament density here. This is only for statistical information. "
 "A decent way is to weigh a known length of filament and compute the ratio of "
@@ -7468,117 +8662,129 @@ msgid ""
 "displacement."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:721
+#: src/libslic3r/PrintConfig.cpp:757
 msgid "g/cm³"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:726
+#: src/libslic3r/PrintConfig.cpp:762
 msgid "Filament type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:727
+#: src/libslic3r/PrintConfig.cpp:763
 msgid "The filament material type for use in custom G-codes."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:754
+#: src/libslic3r/PrintConfig.cpp:790
 msgid "Soluble material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:755
+#: src/libslic3r/PrintConfig.cpp:791
 msgid "Soluble material is most likely used for a soluble support."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:761
+#: src/libslic3r/PrintConfig.cpp:797
 msgid ""
 "Enter your filament cost per kg here. This is only for statistical "
 "information."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:762
+#: src/libslic3r/PrintConfig.cpp:798
 msgid "money/kg"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:771 src/libslic3r/PrintConfig.cpp:2594
+#: src/libslic3r/PrintConfig.cpp:807 src/libslic3r/PrintConfig.cpp:2730
 msgid "(Unknown)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:775
+#: src/libslic3r/PrintConfig.cpp:811
 msgid "Fill angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:777
+#: src/libslic3r/PrintConfig.cpp:813
 msgid ""
 "Default base angle for infill orientation. Cross-hatching will be applied to "
 "this. Bridges will be infilled using the best direction Slic3r can detect, "
 "so this setting does not affect them."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:789
+#: src/libslic3r/PrintConfig.cpp:825
 msgid "Fill density"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:791
+#: src/libslic3r/PrintConfig.cpp:827
 msgid "Density of internal infill, expressed in the range 0% - 100%."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:826
+#: src/libslic3r/PrintConfig.cpp:862
 msgid "Fill pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:828
+#: src/libslic3r/PrintConfig.cpp:864
 msgid "Fill pattern for general low-density infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:844
+#: src/libslic3r/PrintConfig.cpp:882
 msgid "Grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:845
+#: src/libslic3r/PrintConfig.cpp:883
 msgid "Triangles"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:846
+#: src/libslic3r/PrintConfig.cpp:884
 msgid "Stars"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:847
+#: src/libslic3r/PrintConfig.cpp:885
 msgid "Cubic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:848
+#: src/libslic3r/PrintConfig.cpp:886
 msgid "Line"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:850 src/libslic3r/PrintConfig.cpp:2018
+#: src/libslic3r/PrintConfig.cpp:888 src/libslic3r/PrintConfig.cpp:2153
 msgid "Honeycomb"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:851
+#: src/libslic3r/PrintConfig.cpp:889
 msgid "3D Honeycomb"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:852
+#: src/libslic3r/PrintConfig.cpp:890
 msgid "Gyroid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:859 src/libslic3r/PrintConfig.cpp:868
-#: src/libslic3r/PrintConfig.cpp:876 src/libslic3r/PrintConfig.cpp:910
+#: src/libslic3r/PrintConfig.cpp:894
+msgid "Adaptive Cubic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:895
+msgid "Support Cubic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:899 src/libslic3r/PrintConfig.cpp:908
+#: src/libslic3r/PrintConfig.cpp:918 src/libslic3r/PrintConfig.cpp:952
 msgid "First layer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:860
+#: src/libslic3r/PrintConfig.cpp:900
 msgid ""
 "This is the acceleration your printer will use for first layer. Set zero to "
 "disable acceleration control for first layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:869
+#: src/libslic3r/PrintConfig.cpp:909
+msgid "First layer bed temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:910
 msgid ""
 "Heated build plate temperature for the first layer. Set this to zero to "
 "disable bed temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:878
+#: src/libslic3r/PrintConfig.cpp:920
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for first "
 "layer. You can use this to force fatter extrudates for better adhesion. If "
@@ -7586,7 +8792,7 @@ msgid ""
 "layer height. If set to zero, it will use the default extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:891
+#: src/libslic3r/PrintConfig.cpp:933
 msgid ""
 "When printing with very low layer heights, you might still want to print a "
 "thicker bottom layer to improve adhesion and tolerance for non perfect build "
@@ -7594,47 +8800,51 @@ msgid ""
 "example: 150%) over the default layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:900
+#: src/libslic3r/PrintConfig.cpp:942
 msgid "First layer speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:901
+#: src/libslic3r/PrintConfig.cpp:943
 msgid ""
 "If expressed as absolute value in mm/s, this speed will be applied to all "
 "the print moves of the first layer, regardless of their type. If expressed "
 "as a percentage (for example: 40%) it will scale the default speeds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:911
+#: src/libslic3r/PrintConfig.cpp:953
+msgid "First layer extruder temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:954
 msgid ""
 "Extruder temperature for first layer. If you want to control temperature "
 "manually during print, set this to zero to disable temperature control "
 "commands in the output file."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:920
+#: src/libslic3r/PrintConfig.cpp:964
 msgid ""
 "Speed for filling small gaps using short zigzag moves. Keep this reasonably "
 "low to avoid too much shaking and resonance issues. Set zero to disable gaps "
 "filling."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:928
+#: src/libslic3r/PrintConfig.cpp:972
 msgid "Verbose G-code"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:929
+#: src/libslic3r/PrintConfig.cpp:973
 msgid ""
 "Enable this to get a commented G-code file, with each line explained by a "
 "descriptive text. If you print from SD card, the additional weight of the "
 "file could make your firmware slow down."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:936
+#: src/libslic3r/PrintConfig.cpp:980
 msgid "G-code flavor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:937
+#: src/libslic3r/PrintConfig.cpp:981
 msgid ""
 "Some G/M-code commands, including temperature control and others, are not "
 "universal. Set this option to your printer's firmware to get a compatible "
@@ -7642,15 +8852,15 @@ msgid ""
 "extrusion value at all."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:960
+#: src/libslic3r/PrintConfig.cpp:1004
 msgid "No extrusion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:965
+#: src/libslic3r/PrintConfig.cpp:1009
 msgid "Label objects"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:966
+#: src/libslic3r/PrintConfig.cpp:1010
 msgid ""
 "Enable this to add comments into the G-Code labeling print moves with what "
 "object they belong to, which is useful for the Octoprint CancelObject "
@@ -7658,46 +8868,46 @@ msgid ""
 "setup and Wipe into Object / Wipe into Infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:973
+#: src/libslic3r/PrintConfig.cpp:1017
 msgid "High extruder current on filament swap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:974
+#: src/libslic3r/PrintConfig.cpp:1018
 msgid ""
 "It may be beneficial to increase the extruder motor current during the "
 "filament exchange sequence to allow for rapid ramming feed rates and to "
 "overcome resistance when loading a filament with an ugly shaped tip."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:982
+#: src/libslic3r/PrintConfig.cpp:1026
 msgid ""
 "This is the acceleration your printer will use for infill. Set zero to "
 "disable acceleration control for infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:990
+#: src/libslic3r/PrintConfig.cpp:1034
 msgid "Combine infill every"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:992
+#: src/libslic3r/PrintConfig.cpp:1036
 msgid ""
 "This feature allows to combine infill and speed up your print by extruding "
 "thicker infill layers while preserving thin perimeters, thus accuracy."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:995
+#: src/libslic3r/PrintConfig.cpp:1039
 msgid "Combine infill every n layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1001
+#: src/libslic3r/PrintConfig.cpp:1045
 msgid "Infill extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1003
+#: src/libslic3r/PrintConfig.cpp:1047
 msgid "The extruder to use when printing infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1011
+#: src/libslic3r/PrintConfig.cpp:1055
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill. If "
 "left zero, default extrusion width will be used if set, otherwise 1.125 x "
@@ -7706,32 +8916,32 @@ msgid ""
 "example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1021
+#: src/libslic3r/PrintConfig.cpp:1065
 msgid "Infill before perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1022
+#: src/libslic3r/PrintConfig.cpp:1066
 msgid ""
 "This option will switch the print order of perimeters and infill, making the "
 "latter first."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1027
+#: src/libslic3r/PrintConfig.cpp:1071
 msgid "Only infill where needed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1029
+#: src/libslic3r/PrintConfig.cpp:1073
 msgid ""
 "This option will limit infill to the areas actually needed for supporting "
 "ceilings (it will act as internal support material). If enabled, slows down "
 "the G-code generation due to the multiple checks involved."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1036
+#: src/libslic3r/PrintConfig.cpp:1080
 msgid "Infill/perimeters overlap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1038
+#: src/libslic3r/PrintConfig.cpp:1082
 msgid ""
 "This setting applies an additional overlap between infill and perimeters for "
 "better bonding. Theoretically this shouldn't be needed, but backlash might "
@@ -7739,30 +8949,63 @@ msgid ""
 "perimeter extrusion width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1049
+#: src/libslic3r/PrintConfig.cpp:1093
 msgid "Speed for printing the internal fill. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1057
+#: src/libslic3r/PrintConfig.cpp:1101
 msgid "Inherits profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1058
+#: src/libslic3r/PrintConfig.cpp:1102
 msgid "Name of the profile, from which this profile inherits."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1071
+#: src/libslic3r/PrintConfig.cpp:1115
 msgid "Interface shells"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1072
+#: src/libslic3r/PrintConfig.cpp:1116
 msgid ""
 "Force the generation of solid shells between adjacent materials/volumes. "
 "Useful for multi-extruder prints with translucent materials or manual "
 "soluble support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1081
+#: src/libslic3r/PrintConfig.cpp:1124
+msgid "Enable ironing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1125
+msgid ""
+"Enable ironing of the top layers with the hot print head for smooth surface"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1131 src/libslic3r/PrintConfig.cpp:1133
+msgid "Ironing Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1145
+msgid "Flow rate"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1147
+msgid "Percent of a flow rate relative to object's normal layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1155
+msgid "Spacing between ironing passes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1157
+msgid "Distance between ironing lines"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1164 src/libslic3r/PrintConfig.cpp:1166
+msgid "Ironing speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1174
 msgid ""
 "This custom code is inserted at every layer change, right after the Z move "
 "and before the extruder moves to the first layer point. Note that you can "
@@ -7770,11 +9013,11 @@ msgid ""
 "[layer_z]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1092
+#: src/libslic3r/PrintConfig.cpp:1185
 msgid "Supports remaining times"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1093
+#: src/libslic3r/PrintConfig.cpp:1186
 msgid ""
 "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
 "intervals into the G-code to let the firmware show accurate remaining time. "
@@ -7782,151 +9025,163 @@ msgid ""
 "firmware supports M73 Qxx Sxx for the silent mode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1101
+#: src/libslic3r/PrintConfig.cpp:1194
 msgid "Supports stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1102
+#: src/libslic3r/PrintConfig.cpp:1195
 msgid "The firmware supports stealth mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1125
+#: src/libslic3r/PrintConfig.cpp:1200
+msgid "How to apply"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1201
+msgid "Purpose of Machine Limits"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1203
+msgid "How to apply the Machine Limits"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1233
 msgid "Maximum feedrate X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1126
+#: src/libslic3r/PrintConfig.cpp:1234
 msgid "Maximum feedrate Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1127
+#: src/libslic3r/PrintConfig.cpp:1235
 msgid "Maximum feedrate Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1128
+#: src/libslic3r/PrintConfig.cpp:1236
 msgid "Maximum feedrate E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1131
+#: src/libslic3r/PrintConfig.cpp:1239
 msgid "Maximum feedrate of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1132
+#: src/libslic3r/PrintConfig.cpp:1240
 msgid "Maximum feedrate of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1133
+#: src/libslic3r/PrintConfig.cpp:1241
 msgid "Maximum feedrate of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1134
+#: src/libslic3r/PrintConfig.cpp:1242
 msgid "Maximum feedrate of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1142
+#: src/libslic3r/PrintConfig.cpp:1250
 msgid "Maximum acceleration X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1143
+#: src/libslic3r/PrintConfig.cpp:1251
 msgid "Maximum acceleration Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1144
+#: src/libslic3r/PrintConfig.cpp:1252
 msgid "Maximum acceleration Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1145
+#: src/libslic3r/PrintConfig.cpp:1253
 msgid "Maximum acceleration E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1148
+#: src/libslic3r/PrintConfig.cpp:1256
 msgid "Maximum acceleration of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1149
+#: src/libslic3r/PrintConfig.cpp:1257
 msgid "Maximum acceleration of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1150
+#: src/libslic3r/PrintConfig.cpp:1258
 msgid "Maximum acceleration of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1151
+#: src/libslic3r/PrintConfig.cpp:1259
 msgid "Maximum acceleration of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1159
+#: src/libslic3r/PrintConfig.cpp:1267
 msgid "Maximum jerk X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1160
+#: src/libslic3r/PrintConfig.cpp:1268
 msgid "Maximum jerk Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1161
+#: src/libslic3r/PrintConfig.cpp:1269
 msgid "Maximum jerk Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1162
+#: src/libslic3r/PrintConfig.cpp:1270
 msgid "Maximum jerk E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1165
+#: src/libslic3r/PrintConfig.cpp:1273
 msgid "Maximum jerk of the X axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1166
+#: src/libslic3r/PrintConfig.cpp:1274
 msgid "Maximum jerk of the Y axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1167
+#: src/libslic3r/PrintConfig.cpp:1275
 msgid "Maximum jerk of the Z axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1168
+#: src/libslic3r/PrintConfig.cpp:1276
 msgid "Maximum jerk of the E axis"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1178
+#: src/libslic3r/PrintConfig.cpp:1286
 msgid "Minimum feedrate when extruding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1180
+#: src/libslic3r/PrintConfig.cpp:1288
 msgid "Minimum feedrate when extruding (M205 S)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1188
+#: src/libslic3r/PrintConfig.cpp:1296
 msgid "Minimum travel feedrate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1190
+#: src/libslic3r/PrintConfig.cpp:1298
 msgid "Minimum travel feedrate (M205 T)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1198
+#: src/libslic3r/PrintConfig.cpp:1306
 msgid "Maximum acceleration when extruding"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1200
+#: src/libslic3r/PrintConfig.cpp:1308
 msgid "Maximum acceleration when extruding (M204 S)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1208
+#: src/libslic3r/PrintConfig.cpp:1316
 msgid "Maximum acceleration when retracting"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1210
+#: src/libslic3r/PrintConfig.cpp:1318
 msgid "Maximum acceleration when retracting (M204 T)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1217 src/libslic3r/PrintConfig.cpp:1226
+#: src/libslic3r/PrintConfig.cpp:1325 src/libslic3r/PrintConfig.cpp:1334
 msgid "Max"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1218
+#: src/libslic3r/PrintConfig.cpp:1326
 msgid "This setting represents the maximum speed of your fan."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1227
+#: src/libslic3r/PrintConfig.cpp:1335
 #, possible-c-format
 msgid ""
 "This is the highest printable layer height for this extruder, used to cap "
@@ -7935,28 +9190,28 @@ msgid ""
 "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1237
+#: src/libslic3r/PrintConfig.cpp:1345
 msgid "Max print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1238
+#: src/libslic3r/PrintConfig.cpp:1346
 msgid ""
 "When setting other speed settings to 0 Slic3r will autocalculate the optimal "
 "speed in order to keep constant extruder pressure. This experimental setting "
 "is used to set the highest print speed you want to allow."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1248
+#: src/libslic3r/PrintConfig.cpp:1356
 msgid ""
 "This experimental setting is used to set the maximum volumetric speed your "
 "extruder supports."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1257
+#: src/libslic3r/PrintConfig.cpp:1365
 msgid "Max volumetric slope positive"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1258 src/libslic3r/PrintConfig.cpp:1269
+#: src/libslic3r/PrintConfig.cpp:1366 src/libslic3r/PrintConfig.cpp:1377
 msgid ""
 "This experimental setting is used to limit the speed of change in extrusion "
 "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
@@ -7964,95 +9219,95 @@ msgid ""
 "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1262 src/libslic3r/PrintConfig.cpp:1273
+#: src/libslic3r/PrintConfig.cpp:1370 src/libslic3r/PrintConfig.cpp:1381
 msgid "mm³/s²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1268
+#: src/libslic3r/PrintConfig.cpp:1376
 msgid "Max volumetric slope negative"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1280 src/libslic3r/PrintConfig.cpp:1289
+#: src/libslic3r/PrintConfig.cpp:1388 src/libslic3r/PrintConfig.cpp:1397
 msgid "Min"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1281
+#: src/libslic3r/PrintConfig.cpp:1389
 msgid "This setting represents the minimum PWM your fan needs to work."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1290
+#: src/libslic3r/PrintConfig.cpp:1398
 msgid ""
 "This is the lowest printable layer height for this extruder and limits the "
 "resolution for variable layer height. Typical values are between 0.05 mm and "
 "0.1 mm."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1298
+#: src/libslic3r/PrintConfig.cpp:1406
 msgid "Min print speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1299
+#: src/libslic3r/PrintConfig.cpp:1407
 msgid "Slic3r will not scale speed down below this speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1306
+#: src/libslic3r/PrintConfig.cpp:1414
 msgid "Minimal filament extrusion length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1307
+#: src/libslic3r/PrintConfig.cpp:1415
 msgid ""
 "Generate no less than the number of skirt loops required to consume the "
 "specified amount of filament on the bottom layer. For multi-extruder "
 "machines, this minimum applies to each extruder."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1316
+#: src/libslic3r/PrintConfig.cpp:1424
 msgid "Configuration notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1317
+#: src/libslic3r/PrintConfig.cpp:1425
 msgid ""
 "You can put here your personal notes. This text will be added to the G-code "
 "header comments."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1327
+#: src/libslic3r/PrintConfig.cpp:1435
 msgid ""
 "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1332
+#: src/libslic3r/PrintConfig.cpp:1440
 msgid "Host Type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1333
+#: src/libslic3r/PrintConfig.cpp:1441
 msgid ""
 "Slic3r can upload G-code files to a printer host. This field must contain "
 "the kind of the host."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1348
+#: src/libslic3r/PrintConfig.cpp:1456
 msgid "Only retract when crossing perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1349
+#: src/libslic3r/PrintConfig.cpp:1457
 msgid ""
 "Disables retraction when the travel path does not exceed the upper layer's "
 "perimeters (and thus any ooze will be probably invisible)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1356
+#: src/libslic3r/PrintConfig.cpp:1464
 msgid ""
 "This option will drop the temperature of the inactive extruders to prevent "
 "oozing. It will enable a tall skirt automatically and move extruders outside "
 "such skirt when changing temperatures."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1363
+#: src/libslic3r/PrintConfig.cpp:1471
 msgid "Output filename format"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1364
+#: src/libslic3r/PrintConfig.cpp:1472
 msgid ""
 "You can use all configuration options as variables inside this template. For "
 "example: [layer_height], [fill_density] etc. You can also use [timestamp], "
@@ -8060,31 +9315,31 @@ msgid ""
 "[input_filename], [input_filename_base]."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1373
+#: src/libslic3r/PrintConfig.cpp:1481
 msgid "Detect bridging perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1375
+#: src/libslic3r/PrintConfig.cpp:1483
 msgid ""
 "Experimental option to adjust flow for overhangs (bridge flow will be used), "
 "to apply bridge speed to them and enable fan."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1381
+#: src/libslic3r/PrintConfig.cpp:1489
 msgid "Filament parking position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1382
+#: src/libslic3r/PrintConfig.cpp:1490
 msgid ""
 "Distance of the extruder tip from the position where the filament is parked "
 "when unloaded. This should match the value in printer firmware."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1390
+#: src/libslic3r/PrintConfig.cpp:1498
 msgid "Extra loading distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1391
+#: src/libslic3r/PrintConfig.cpp:1499
 msgid ""
 "When set to zero, the distance the filament is moved from parking position "
 "during load is exactly the same as it was moved back during unload. When "
@@ -8092,28 +9347,28 @@ msgid ""
 "than unloading."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1399 src/libslic3r/PrintConfig.cpp:1417
-#: src/libslic3r/PrintConfig.cpp:1430 src/libslic3r/PrintConfig.cpp:1440
+#: src/libslic3r/PrintConfig.cpp:1507 src/libslic3r/PrintConfig.cpp:1525
+#: src/libslic3r/PrintConfig.cpp:1538 src/libslic3r/PrintConfig.cpp:1548
 msgid "Perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1400
+#: src/libslic3r/PrintConfig.cpp:1508
 msgid ""
 "This is the acceleration your printer will use for perimeters. A high value "
 "like 9000 usually gives good results if your hardware is up to the job. Set "
 "zero to disable acceleration control for perimeters."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1408
+#: src/libslic3r/PrintConfig.cpp:1516
 msgid "Perimeter extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1410
+#: src/libslic3r/PrintConfig.cpp:1518
 msgid ""
 "The extruder to use when printing perimeters and brim. First extruder is 1."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1419
+#: src/libslic3r/PrintConfig.cpp:1527
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for perimeters. "
 "You may want to use thinner extrudates to get more accurate surfaces. If "
@@ -8122,12 +9377,12 @@ msgid ""
 "it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1432
+#: src/libslic3r/PrintConfig.cpp:1540
 msgid ""
 "Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1442
+#: src/libslic3r/PrintConfig.cpp:1550
 msgid ""
 "This option sets the number of perimeters to generate for each layer. Note "
 "that Slic3r may increase this number automatically when it detects sloping "
@@ -8135,11 +9390,11 @@ msgid ""
 "Perimeters option is enabled."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1446
+#: src/libslic3r/PrintConfig.cpp:1554
 msgid "(minimum)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1454
+#: src/libslic3r/PrintConfig.cpp:1562
 msgid ""
 "If you want to process the output G-code through custom scripts, just list "
 "their absolute paths here. Separate multiple scripts with a semicolon. "
@@ -8148,55 +9403,55 @@ msgid ""
 "environment variables."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1466
+#: src/libslic3r/PrintConfig.cpp:1574
 msgid "Printer type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1467
+#: src/libslic3r/PrintConfig.cpp:1575
 msgid "Type of the printer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1472
+#: src/libslic3r/PrintConfig.cpp:1580
 msgid "Printer notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1473
+#: src/libslic3r/PrintConfig.cpp:1581
 msgid "You can put your notes regarding the printer here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1481
+#: src/libslic3r/PrintConfig.cpp:1589
 msgid "Printer vendor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1482
+#: src/libslic3r/PrintConfig.cpp:1590
 msgid "Name of the printer vendor."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1487
+#: src/libslic3r/PrintConfig.cpp:1595
 msgid "Printer variant"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1488
+#: src/libslic3r/PrintConfig.cpp:1596
 msgid ""
 "Name of the printer variant. For example, the printer variants may be "
 "differentiated by a nozzle diameter."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1501
+#: src/libslic3r/PrintConfig.cpp:1609
 msgid "Raft layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1503
+#: src/libslic3r/PrintConfig.cpp:1611
 msgid ""
 "The object will be raised by this number of layers, and support material "
 "will be generated under it."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1511
+#: src/libslic3r/PrintConfig.cpp:1619
 msgid "Resolution"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1512
+#: src/libslic3r/PrintConfig.cpp:1620
 msgid ""
 "Minimum detail resolution, used to simplify the input file for speeding up "
 "the slicing job and reducing memory usage. High-resolution models often "
@@ -8204,289 +9459,293 @@ msgid ""
 "simplification and use full resolution from input."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1522
+#: src/libslic3r/PrintConfig.cpp:1630
 msgid "Minimum travel after retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1523
+#: src/libslic3r/PrintConfig.cpp:1631
 msgid ""
 "Retraction is not triggered when travel moves are shorter than this length."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1529
+#: src/libslic3r/PrintConfig.cpp:1637
 msgid "Retract amount before wipe"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1530
+#: src/libslic3r/PrintConfig.cpp:1638
 msgid ""
 "With bowden extruders, it may be wise to do some amount of quick retract "
 "before doing the wipe movement."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1537
+#: src/libslic3r/PrintConfig.cpp:1645
 msgid "Retract on layer change"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1538
+#: src/libslic3r/PrintConfig.cpp:1646
 msgid "This flag enforces a retraction whenever a Z move is done."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1551
+#: src/libslic3r/PrintConfig.cpp:1651 src/libslic3r/PrintConfig.cpp:1659
 msgid "Length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1544
+#: src/libslic3r/PrintConfig.cpp:1652
 msgid "Retraction Length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1545
+#: src/libslic3r/PrintConfig.cpp:1653
 msgid ""
 "When retraction is triggered, filament is pulled back by the specified "
 "amount (the length is measured on raw filament, before it enters the "
 "extruder)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1547 src/libslic3r/PrintConfig.cpp:1556
+#: src/libslic3r/PrintConfig.cpp:1655 src/libslic3r/PrintConfig.cpp:1664
 msgid "mm (zero to disable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1552
+#: src/libslic3r/PrintConfig.cpp:1660
 msgid "Retraction Length (Toolchange)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1553
+#: src/libslic3r/PrintConfig.cpp:1661
 msgid ""
 "When retraction is triggered before changing tool, filament is pulled back "
 "by the specified amount (the length is measured on raw filament, before it "
 "enters the extruder)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1561
+#: src/libslic3r/PrintConfig.cpp:1669
 msgid "Lift Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1562
+#: src/libslic3r/PrintConfig.cpp:1670
 msgid ""
 "If you set this to a positive value, Z is quickly raised every time a "
 "retraction is triggered. When using multiple extruders, only the setting for "
 "the first extruder will be considered."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1569
+#: src/libslic3r/PrintConfig.cpp:1677
 msgid "Above Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1570
+#: src/libslic3r/PrintConfig.cpp:1678
 msgid "Only lift Z above"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1571
+#: src/libslic3r/PrintConfig.cpp:1679
 msgid ""
 "If you set this to a positive value, Z lift will only take place above the "
 "specified absolute Z. You can tune this setting for skipping lift on the "
 "first layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1578
+#: src/libslic3r/PrintConfig.cpp:1686
 msgid "Below Z"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1579
+#: src/libslic3r/PrintConfig.cpp:1687
 msgid "Only lift Z below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1580
+#: src/libslic3r/PrintConfig.cpp:1688
 msgid ""
 "If you set this to a positive value, Z lift will only take place below the "
 "specified absolute Z. You can tune this setting for limiting lift to the "
 "first layers."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1588 src/libslic3r/PrintConfig.cpp:1596
+#: src/libslic3r/PrintConfig.cpp:1696 src/libslic3r/PrintConfig.cpp:1704
 msgid "Extra length on restart"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1589
+#: src/libslic3r/PrintConfig.cpp:1697
 msgid ""
 "When the retraction is compensated after the travel move, the extruder will "
 "push this additional amount of filament. This setting is rarely needed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1597
+#: src/libslic3r/PrintConfig.cpp:1705
 msgid ""
 "When the retraction is compensated after changing tool, the extruder will "
 "push this additional amount of filament."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1604 src/libslic3r/PrintConfig.cpp:1605
+#: src/libslic3r/PrintConfig.cpp:1712 src/libslic3r/PrintConfig.cpp:1713
 msgid "Retraction Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1606
+#: src/libslic3r/PrintConfig.cpp:1714
 msgid "The speed for retractions (it only applies to the extruder motor)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1612 src/libslic3r/PrintConfig.cpp:1613
+#: src/libslic3r/PrintConfig.cpp:1720 src/libslic3r/PrintConfig.cpp:1721
 msgid "Deretraction Speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1614
+#: src/libslic3r/PrintConfig.cpp:1722
 msgid ""
 "The speed for loading of a filament into extruder after retraction (it only "
 "applies to the extruder motor). If left to zero, the retraction speed is "
 "used."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1621
+#: src/libslic3r/PrintConfig.cpp:1729
 msgid "Seam position"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1623
+#: src/libslic3r/PrintConfig.cpp:1731
 msgid "Position of perimeters starting points."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1629
+#: src/libslic3r/PrintConfig.cpp:1737
 msgid "Random"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1630
+#: src/libslic3r/PrintConfig.cpp:1738
 msgid "Nearest"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1631
+#: src/libslic3r/PrintConfig.cpp:1739
 msgid "Aligned"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1639
+#: src/libslic3r/PrintConfig.cpp:1747
 msgid "Direction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1641
+#: src/libslic3r/PrintConfig.cpp:1749
 msgid "Preferred direction of the seam"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1642
+#: src/libslic3r/PrintConfig.cpp:1750
 msgid "Seam preferred direction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1649
+#: src/libslic3r/PrintConfig.cpp:1757
 msgid "Jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1651
+#: src/libslic3r/PrintConfig.cpp:1759
 msgid "Seam preferred direction jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1652
+#: src/libslic3r/PrintConfig.cpp:1760
 msgid "Preferred direction of the seam - jitter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1662
+#: src/libslic3r/PrintConfig.cpp:1769
+msgid "Serial port"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1770
 msgid "USB/serial port for printer connection."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1669
+#: src/libslic3r/PrintConfig.cpp:1777
 msgid "Serial port speed"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1670
+#: src/libslic3r/PrintConfig.cpp:1778
 msgid "Speed (baud) of USB/serial port for printer connection."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1679
+#: src/libslic3r/PrintConfig.cpp:1787
 msgid "Distance from object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1680
+#: src/libslic3r/PrintConfig.cpp:1788
 msgid ""
 "Distance between skirt and object(s). Set this to zero to attach the skirt "
 "to the object(s) and get a brim for better adhesion."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1687
+#: src/libslic3r/PrintConfig.cpp:1795
 msgid "Skirt height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1688
+#: src/libslic3r/PrintConfig.cpp:1796
 msgid ""
 "Height of skirt expressed in layers. Set this to a tall value to use skirt "
 "as a shield against drafts."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1695
+#: src/libslic3r/PrintConfig.cpp:1803
 msgid "Draft shield"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1696
+#: src/libslic3r/PrintConfig.cpp:1804
 msgid ""
 "If enabled, the skirt will be as tall as a highest printed object. This is "
 "useful to protect an ABS or ASA print from warping and detaching from print "
 "bed due to wind draft."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1702
+#: src/libslic3r/PrintConfig.cpp:1810
 msgid "Loops (minimum)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1703
+#: src/libslic3r/PrintConfig.cpp:1811
 msgid "Skirt Loops"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1704
+#: src/libslic3r/PrintConfig.cpp:1812
 msgid ""
 "Number of loops for the skirt. If the Minimum Extrusion Length option is "
 "set, the number of loops might be greater than the one configured here. Set "
 "this to zero to disable skirt completely."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1712
+#: src/libslic3r/PrintConfig.cpp:1820
 msgid "Slow down if layer print time is below"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1713
+#: src/libslic3r/PrintConfig.cpp:1821
 msgid ""
 "If layer print time is estimated below this number of seconds, print moves "
 "speed will be scaled down to extend duration to this value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1722
+#: src/libslic3r/PrintConfig.cpp:1830
 msgid "Small perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1724
+#: src/libslic3r/PrintConfig.cpp:1832
 msgid ""
 "This separate setting will affect the speed of perimeters having radius <= "
 "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
 "be calculated on the perimeters speed setting above. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1734
+#: src/libslic3r/PrintConfig.cpp:1842
 msgid "Solid infill threshold area"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1736
+#: src/libslic3r/PrintConfig.cpp:1844
 msgid ""
 "Force solid infill for regions having a smaller area than the specified "
 "threshold."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1737
+#: src/libslic3r/PrintConfig.cpp:1845
 msgid "mm²"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1743
+#: src/libslic3r/PrintConfig.cpp:1851
 msgid "Solid infill extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1745
+#: src/libslic3r/PrintConfig.cpp:1853
 msgid "The extruder to use when printing solid infill."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1751
+#: src/libslic3r/PrintConfig.cpp:1859
 msgid "Solid infill every"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1753
+#: src/libslic3r/PrintConfig.cpp:1861
 msgid ""
 "This feature allows to force a solid layer every given number of layers. "
 "Zero to disable. You can set this to any value (for example 9999); Slic3r "
@@ -8494,7 +9753,7 @@ msgid ""
 "according to nozzle diameter and layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1765
+#: src/libslic3r/PrintConfig.cpp:1873
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "solid surfaces. If left zero, default extrusion width will be used if set, "
@@ -8502,26 +9761,26 @@ msgid ""
 "(for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1776
+#: src/libslic3r/PrintConfig.cpp:1884
 msgid ""
 "Speed for printing solid regions (top/bottom/internal horizontal shells). "
 "This can be expressed as a percentage (for example: 80%) over the default "
 "infill speed above. Set to zero for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1788
+#: src/libslic3r/PrintConfig.cpp:1896
 msgid "Number of solid layers to generate on top and bottom surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1794 src/libslic3r/PrintConfig.cpp:1795
+#: src/libslic3r/PrintConfig.cpp:1902 src/libslic3r/PrintConfig.cpp:1903
 msgid "Minimum thickness of a top / bottom shell"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1801
+#: src/libslic3r/PrintConfig.cpp:1909
 msgid "Spiral vase"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1802
+#: src/libslic3r/PrintConfig.cpp:1910
 msgid ""
 "This feature will raise Z gradually while printing a single-walled object in "
 "order to remove any visible seam. This option requires a single perimeter, "
@@ -8530,18 +9789,18 @@ msgid ""
 "when printing more than an object."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1810
+#: src/libslic3r/PrintConfig.cpp:1918
 msgid "Temperature variation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1811
+#: src/libslic3r/PrintConfig.cpp:1919
 msgid ""
 "Temperature difference to be applied when an extruder is not active. Enables "
 "a full-height \"sacrificial\" skirt on which the nozzles are periodically "
 "wiped."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1821
+#: src/libslic3r/PrintConfig.cpp:1929
 msgid ""
 "This start procedure is inserted at the beginning, after bed has reached the "
 "target temperature and extruder just started heating, and before extruder "
@@ -8552,7 +9811,7 @@ msgid ""
 "put a \"M109 S[first_layer_temperature]\" command wherever you want."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1836
+#: src/libslic3r/PrintConfig.cpp:1944
 msgid ""
 "This start procedure is inserted at the beginning, after any printer start "
 "gcode (and after any toolchange to this filament in case of multi-material "
@@ -8565,29 +9824,45 @@ msgid ""
 "extruders, the gcode is processed in extruder order."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1852
+#: src/libslic3r/PrintConfig.cpp:1960
+msgid "Color change G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1961
+msgid "This G-code will be used as a code for the color change"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1970
+msgid "This G-code will be used as a code for the pause print"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1979
+msgid "This G-code will be used as a custom code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1987
 msgid "Single Extruder Multi Material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1853
+#: src/libslic3r/PrintConfig.cpp:1988
 msgid "The printer multiplexes filaments into a single hot end."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1858
+#: src/libslic3r/PrintConfig.cpp:1993
 msgid "Prime all printing extruders"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1859
+#: src/libslic3r/PrintConfig.cpp:1994
 msgid ""
 "If enabled, all printing extruders will be primed at the front edge of the "
 "print bed at the start of the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1864
+#: src/libslic3r/PrintConfig.cpp:1999
 msgid "No sparse layers (EXPERIMENTAL)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1865
+#: src/libslic3r/PrintConfig.cpp:2000
 msgid ""
 "If enabled, the wipe tower will not be printed on layers with no "
 "toolchanges. On layers with a toolchange, extruder will travel downward to "
@@ -8595,75 +9870,75 @@ msgid ""
 "with the print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1872
+#: src/libslic3r/PrintConfig.cpp:2007
 msgid "Generate support material"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1874
+#: src/libslic3r/PrintConfig.cpp:2009
 msgid "Enable support material generation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1878
+#: src/libslic3r/PrintConfig.cpp:2013
 msgid "Auto generated supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1880
+#: src/libslic3r/PrintConfig.cpp:2015
 msgid ""
 "If checked, supports will be generated automatically based on the overhang "
 "threshold value. If unchecked, supports will be generated inside the "
 "\"Support Enforcer\" volumes only."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1886
+#: src/libslic3r/PrintConfig.cpp:2021
 msgid "XY separation between an object and its support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1888
+#: src/libslic3r/PrintConfig.cpp:2023
 msgid ""
 "XY separation between an object and its support. If expressed as percentage "
 "(for example 50%), it will be calculated over external perimeter width."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1898
+#: src/libslic3r/PrintConfig.cpp:2033
 msgid "Pattern angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1900
+#: src/libslic3r/PrintConfig.cpp:2035
 msgid ""
 "Use this setting to rotate the support material pattern on the horizontal "
 "plane."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1910 src/libslic3r/PrintConfig.cpp:2693
+#: src/libslic3r/PrintConfig.cpp:2045 src/libslic3r/PrintConfig.cpp:2840
 msgid ""
 "Only create support if it lies on a build plate. Don't create support on a "
 "print."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1916
+#: src/libslic3r/PrintConfig.cpp:2051
 msgid "Contact Z distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1918
+#: src/libslic3r/PrintConfig.cpp:2053
 msgid ""
 "The vertical distance between object and support material interface. Setting "
 "this to 0 will also prevent Slic3r from using bridge flow and speed for the "
 "first object layer."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1925
+#: src/libslic3r/PrintConfig.cpp:2060
 msgid "0 (soluble)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1926
+#: src/libslic3r/PrintConfig.cpp:2061
 msgid "0.2 (detachable)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1931
+#: src/libslic3r/PrintConfig.cpp:2066
 msgid "Enforce support for the first"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1933
+#: src/libslic3r/PrintConfig.cpp:2068
 msgid ""
 "Generate support material for the specified number of layers counting from "
 "bottom, regardless of whether normal support material is enabled or not and "
@@ -8671,21 +9946,21 @@ msgid ""
 "of objects having a very thin or poor footprint on the build plate."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1938
+#: src/libslic3r/PrintConfig.cpp:2073
 msgid "Enforce support for the first n layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1944
+#: src/libslic3r/PrintConfig.cpp:2079
 msgid "Support material/raft/skirt extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1946
+#: src/libslic3r/PrintConfig.cpp:2081
 msgid ""
 "The extruder to use when printing support material, raft and skirt (1+, 0 to "
 "use the current extruder to minimize tool changes)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1955
+#: src/libslic3r/PrintConfig.cpp:2090
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for support "
 "material. If left zero, default extrusion width will be used if set, "
@@ -8693,89 +9968,89 @@ msgid ""
 "example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1964
+#: src/libslic3r/PrintConfig.cpp:2099
 msgid "Interface loops"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1966
+#: src/libslic3r/PrintConfig.cpp:2101
 msgid ""
 "Cover the top contact layer of the supports with loops. Disabled by default."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1971
+#: src/libslic3r/PrintConfig.cpp:2106
 msgid "Support material/raft interface extruder"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1973
+#: src/libslic3r/PrintConfig.cpp:2108
 msgid ""
 "The extruder to use when printing support material interface (1+, 0 to use "
 "the current extruder to minimize tool changes). This affects raft too."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1980
+#: src/libslic3r/PrintConfig.cpp:2115
 msgid "Interface layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1982
+#: src/libslic3r/PrintConfig.cpp:2117
 msgid ""
 "Number of interface layers to insert between the object(s) and support "
 "material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1989
+#: src/libslic3r/PrintConfig.cpp:2124
 msgid "Interface pattern spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:1991
+#: src/libslic3r/PrintConfig.cpp:2126
 msgid "Spacing between interface lines. Set zero to get a solid interface."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2000
+#: src/libslic3r/PrintConfig.cpp:2135
 msgid ""
 "Speed for printing support material interface layers. If expressed as "
 "percentage (for example 50%) it will be calculated over support material "
 "speed."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2009
+#: src/libslic3r/PrintConfig.cpp:2144
 msgid "Pattern"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2011
+#: src/libslic3r/PrintConfig.cpp:2146
 msgid "Pattern used to generate support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2017
+#: src/libslic3r/PrintConfig.cpp:2152
 msgid "Rectilinear grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2023
+#: src/libslic3r/PrintConfig.cpp:2158
 msgid "Pattern spacing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2025
+#: src/libslic3r/PrintConfig.cpp:2160
 msgid "Spacing between support material lines."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2034
+#: src/libslic3r/PrintConfig.cpp:2169
 msgid "Speed for printing support material."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2041
+#: src/libslic3r/PrintConfig.cpp:2176
 msgid "Synchronize with object layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2043
+#: src/libslic3r/PrintConfig.cpp:2178
 msgid ""
 "Synchronize support layers with the object print layers. This is useful with "
 "multi-material printers, where the extruder switch is expensive."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2049
+#: src/libslic3r/PrintConfig.cpp:2184
 msgid "Overhang threshold"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2051
+#: src/libslic3r/PrintConfig.cpp:2186
 msgid ""
 "Support material will not be generated for overhangs whose slope angle (90° "
 "= vertical) is above the given threshold. In other words, this value "
@@ -8784,43 +10059,47 @@ msgid ""
 "detection (recommended)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2063
+#: src/libslic3r/PrintConfig.cpp:2198
 msgid "With sheath around the support"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2065
+#: src/libslic3r/PrintConfig.cpp:2200
 msgid ""
 "Add a sheath (a single perimeter line) around the base support. This makes "
 "the support more reliable, but also more difficult to remove."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2072
+#: src/libslic3r/PrintConfig.cpp:2207
 msgid ""
 "Extruder temperature for layers after the first one. Set this to zero to "
 "disable temperature control commands in the output."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2080
+#: src/libslic3r/PrintConfig.cpp:2210
+msgid "Extruder temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2216
 msgid "Detect thin walls"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2082
+#: src/libslic3r/PrintConfig.cpp:2218
 msgid ""
 "Detect single-width walls (parts where two extrusions don't fit and we need "
 "to collapse them into a single trace)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2088
+#: src/libslic3r/PrintConfig.cpp:2224
 msgid "Threads"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2089
+#: src/libslic3r/PrintConfig.cpp:2225
 msgid ""
 "Threads are used to parallelize long-running tasks. Optimal threads number "
 "is slightly above the number of available cores/processors."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2101
+#: src/libslic3r/PrintConfig.cpp:2237
 msgid ""
 "This custom code is inserted before every toolchange. Placeholder variables "
 "for all PrusaSlicer settings as well as {previous_extruder} and "
@@ -8830,7 +10109,7 @@ msgid ""
 "behaviour both before and after the toolchange."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2114
+#: src/libslic3r/PrintConfig.cpp:2250
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "top surfaces. You may want to use thinner extrudates to fill all narrow "
@@ -8839,7 +10118,7 @@ msgid ""
 "percentage (for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2126
+#: src/libslic3r/PrintConfig.cpp:2262
 msgid ""
 "Speed for printing top solid layers (it only applies to the uppermost "
 "external layers and not to their internal solid layers). You may want to "
@@ -8848,54 +10127,54 @@ msgid ""
 "for auto."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2141
+#: src/libslic3r/PrintConfig.cpp:2277
 msgid "Number of solid layers to generate on top surfaces."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2142
+#: src/libslic3r/PrintConfig.cpp:2278
 msgid "Top solid layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2150
+#: src/libslic3r/PrintConfig.cpp:2286
 msgid ""
 "The number of top solid layers is increased above top_solid_layers if "
 "necessary to satisfy minimum thickness of top shell. This is useful to "
 "prevent pillowing effect when printing with variable layer height."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2153
+#: src/libslic3r/PrintConfig.cpp:2289
 msgid "Minimum top shell thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2160
+#: src/libslic3r/PrintConfig.cpp:2296
 msgid "Speed for travel moves (jumps between distant extrusion points)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2168
+#: src/libslic3r/PrintConfig.cpp:2304
 msgid "Use firmware retraction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2169
+#: src/libslic3r/PrintConfig.cpp:2305
 msgid ""
 "This experimental setting uses G10 and G11 commands to have the firmware "
 "handle the retraction. This is only supported in recent Marlin."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2175
+#: src/libslic3r/PrintConfig.cpp:2311
 msgid "Use relative E distances"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2176
+#: src/libslic3r/PrintConfig.cpp:2312
 msgid ""
 "If your firmware requires relative E values, check this, otherwise leave it "
 "unchecked. Most firmwares use absolute values."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2182
+#: src/libslic3r/PrintConfig.cpp:2318
 msgid "Use volumetric E"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2183
+#: src/libslic3r/PrintConfig.cpp:2319
 msgid ""
 "This experimental setting uses outputs the E values in cubic millimeters "
 "instead of linear millimeters. If your firmware doesn't already know "
@@ -8905,127 +10184,127 @@ msgid ""
 "only supported in recent Marlin."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2193
+#: src/libslic3r/PrintConfig.cpp:2329
 msgid "Enable variable layer height feature"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2194
+#: src/libslic3r/PrintConfig.cpp:2330
 msgid ""
 "Some printers or printer setups may have difficulties printing with a "
 "variable layer height. Enabled by default."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2200
+#: src/libslic3r/PrintConfig.cpp:2336
 msgid "Wipe while retracting"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2201
+#: src/libslic3r/PrintConfig.cpp:2337
 msgid ""
 "This flag will move the nozzle while retracting to minimize the possible "
 "blob on leaky extruders."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2208
+#: src/libslic3r/PrintConfig.cpp:2344
 msgid ""
 "Multi material printers may need to prime or purge extruders on tool "
 "changes. Extrude the excess material into the wipe tower."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2214
+#: src/libslic3r/PrintConfig.cpp:2350
 msgid "Purging volumes - load/unload volumes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2215
+#: src/libslic3r/PrintConfig.cpp:2351
 msgid ""
 "This vector saves required volumes to change from/to each tool used on the "
 "wipe tower. These values are used to simplify creation of the full purging "
 "volumes below."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2221
+#: src/libslic3r/PrintConfig.cpp:2357
 msgid "Purging volumes - matrix"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2222
+#: src/libslic3r/PrintConfig.cpp:2358
 msgid ""
 "This matrix describes volumes (in cubic milimetres) required to purge the "
 "new filament on the wipe tower for any given pair of tools."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2231
+#: src/libslic3r/PrintConfig.cpp:2367
 msgid "Position X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2232
+#: src/libslic3r/PrintConfig.cpp:2368
 msgid "X coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2238
+#: src/libslic3r/PrintConfig.cpp:2374
 msgid "Position Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2239
+#: src/libslic3r/PrintConfig.cpp:2375
 msgid "Y coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2246
+#: src/libslic3r/PrintConfig.cpp:2382
 msgid "Width of a wipe tower"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2252
+#: src/libslic3r/PrintConfig.cpp:2388
 msgid "Wipe tower rotation angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2253
+#: src/libslic3r/PrintConfig.cpp:2389
 msgid "Wipe tower rotation angle with respect to x-axis."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2260
+#: src/libslic3r/PrintConfig.cpp:2396
 msgid "Wipe into this object's infill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2261
+#: src/libslic3r/PrintConfig.cpp:2397
 msgid ""
 "Purging after toolchange will done inside this object's infills. This lowers "
 "the amount of waste but may result in longer print time  due to additional "
 "travel moves."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2268
+#: src/libslic3r/PrintConfig.cpp:2404
 msgid "Wipe into this object"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2269
+#: src/libslic3r/PrintConfig.cpp:2405
 msgid ""
 "Object will be used to purge the nozzle after a toolchange to save material "
 "that would otherwise end up in the wipe tower and decrease print time. "
 "Colours of the objects will be mixed as a result."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2275
+#: src/libslic3r/PrintConfig.cpp:2411
 msgid "Maximal bridging distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2276
+#: src/libslic3r/PrintConfig.cpp:2412
 msgid "Maximal distance between supports on sparse infill sections."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2282
+#: src/libslic3r/PrintConfig.cpp:2418
 msgid "XY Size Compensation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2284
+#: src/libslic3r/PrintConfig.cpp:2420
 msgid ""
 "The object will be grown/shrunk in the XY plane by the configured value "
 "(negative = inwards, positive = outwards). This might be useful for fine-"
 "tuning hole sizes."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2292
+#: src/libslic3r/PrintConfig.cpp:2428
 msgid "Z offset"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2293
+#: src/libslic3r/PrintConfig.cpp:2429
 msgid ""
 "This value will be added (or subtracted) from all the Z coordinates in the "
 "output G-code. It is used to compensate for bad Z endstop position: for "
@@ -9033,408 +10312,414 @@ msgid ""
 "print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2360
+#: src/libslic3r/PrintConfig.cpp:2496
 msgid "Display width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2361
+#: src/libslic3r/PrintConfig.cpp:2497
 msgid "Width of the display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2366
+#: src/libslic3r/PrintConfig.cpp:2502
 msgid "Display height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2367
+#: src/libslic3r/PrintConfig.cpp:2503
 msgid "Height of the display"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2372
+#: src/libslic3r/PrintConfig.cpp:2508
 msgid "Number of pixels in"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2374
+#: src/libslic3r/PrintConfig.cpp:2510
 msgid "Number of pixels in X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2380
+#: src/libslic3r/PrintConfig.cpp:2516
 msgid "Number of pixels in Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2385
+#: src/libslic3r/PrintConfig.cpp:2521
 msgid "Display horizontal mirroring"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2386
+#: src/libslic3r/PrintConfig.cpp:2522
 msgid "Mirror horizontally"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2387
+#: src/libslic3r/PrintConfig.cpp:2523
 msgid "Enable horizontal mirroring of output images"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2392
+#: src/libslic3r/PrintConfig.cpp:2528
 msgid "Display vertical mirroring"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2393
+#: src/libslic3r/PrintConfig.cpp:2529
 msgid "Mirror vertically"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2394
+#: src/libslic3r/PrintConfig.cpp:2530
 msgid "Enable vertical mirroring of output images"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2399
+#: src/libslic3r/PrintConfig.cpp:2535
 msgid "Display orientation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2400
+#: src/libslic3r/PrintConfig.cpp:2536
 msgid ""
 "Set the actual LCD display orientation inside the SLA printer. Portrait mode "
 "will flip the meaning of display width and height parameters and the output "
 "images will be rotated by 90 degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2406
+#: src/libslic3r/PrintConfig.cpp:2542
 msgid "Landscape"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2407
+#: src/libslic3r/PrintConfig.cpp:2543
 msgid "Portrait"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2412
+#: src/libslic3r/PrintConfig.cpp:2548
 msgid "Fast"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2413
+#: src/libslic3r/PrintConfig.cpp:2549
 msgid "Fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2414
+#: src/libslic3r/PrintConfig.cpp:2550
 msgid "Time of the fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2421
+#: src/libslic3r/PrintConfig.cpp:2557
 msgid "Slow"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2422
+#: src/libslic3r/PrintConfig.cpp:2558
 msgid "Slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2423
+#: src/libslic3r/PrintConfig.cpp:2559
 msgid "Time of the slow tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2430
+#: src/libslic3r/PrintConfig.cpp:2566
 msgid "Area fill"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2431
+#: src/libslic3r/PrintConfig.cpp:2567
 msgid ""
 "The percentage of the bed area. \n"
 "If the print area exceeds the specified value, \n"
 "then a slow tilt will be used, otherwise - a fast tilt"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2438 src/libslic3r/PrintConfig.cpp:2439
-#: src/libslic3r/PrintConfig.cpp:2440
+#: src/libslic3r/PrintConfig.cpp:2574 src/libslic3r/PrintConfig.cpp:2575
+#: src/libslic3r/PrintConfig.cpp:2576
 msgid "Printer scaling correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2446 src/libslic3r/PrintConfig.cpp:2447
+#: src/libslic3r/PrintConfig.cpp:2582 src/libslic3r/PrintConfig.cpp:2583
 msgid "Printer absolute correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2448
+#: src/libslic3r/PrintConfig.cpp:2584
 msgid ""
 "Will inflate or deflate the sliced 2D polygons according to the sign of the "
 "correction."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2454
+#: src/libslic3r/PrintConfig.cpp:2590
 msgid "Elephant foot minimum width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2456
+#: src/libslic3r/PrintConfig.cpp:2592
 msgid ""
 "Minimum width of features to maintain when doing elephant foot compensation."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2463 src/libslic3r/PrintConfig.cpp:2464
+#: src/libslic3r/PrintConfig.cpp:2599 src/libslic3r/PrintConfig.cpp:2600
 msgid "Printer gamma correction"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2465
+#: src/libslic3r/PrintConfig.cpp:2601
 msgid ""
 "This will apply a gamma correction to the rasterized 2D polygons. A gamma "
 "value of zero means thresholding with the threshold in the middle. This "
 "behaviour eliminates antialiasing without losing holes in polygons."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2477 src/libslic3r/PrintConfig.cpp:2478
+#: src/libslic3r/PrintConfig.cpp:2613 src/libslic3r/PrintConfig.cpp:2614
 msgid "SLA material type"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2489 src/libslic3r/PrintConfig.cpp:2490
+#: src/libslic3r/PrintConfig.cpp:2625 src/libslic3r/PrintConfig.cpp:2626
 msgid "Initial layer height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2496 src/libslic3r/PrintConfig.cpp:2497
+#: src/libslic3r/PrintConfig.cpp:2632 src/libslic3r/PrintConfig.cpp:2633
 msgid "Bottle volume"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2498
+#: src/libslic3r/PrintConfig.cpp:2634
 msgid "ml"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2503 src/libslic3r/PrintConfig.cpp:2504
+#: src/libslic3r/PrintConfig.cpp:2639 src/libslic3r/PrintConfig.cpp:2640
 msgid "Bottle weight"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2505
+#: src/libslic3r/PrintConfig.cpp:2641
 msgid "kg"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2512
+#: src/libslic3r/PrintConfig.cpp:2648
 msgid "g/ml"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2519
+#: src/libslic3r/PrintConfig.cpp:2655
 msgid "money/bottle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2524
+#: src/libslic3r/PrintConfig.cpp:2660
 msgid "Faded layers"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2525
+#: src/libslic3r/PrintConfig.cpp:2661
 msgid ""
 "Number of the layers needed for the exposure time fade from initial exposure "
 "time to the exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2532 src/libslic3r/PrintConfig.cpp:2533
+#: src/libslic3r/PrintConfig.cpp:2668 src/libslic3r/PrintConfig.cpp:2669
 msgid "Minimum exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2540 src/libslic3r/PrintConfig.cpp:2541
+#: src/libslic3r/PrintConfig.cpp:2676 src/libslic3r/PrintConfig.cpp:2677
 msgid "Maximum exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2548 src/libslic3r/PrintConfig.cpp:2549
+#: src/libslic3r/PrintConfig.cpp:2684 src/libslic3r/PrintConfig.cpp:2685
 msgid "Exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2555 src/libslic3r/PrintConfig.cpp:2556
+#: src/libslic3r/PrintConfig.cpp:2691 src/libslic3r/PrintConfig.cpp:2692
 msgid "Minimum initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2563 src/libslic3r/PrintConfig.cpp:2564
+#: src/libslic3r/PrintConfig.cpp:2699 src/libslic3r/PrintConfig.cpp:2700
 msgid "Maximum initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2571 src/libslic3r/PrintConfig.cpp:2572
+#: src/libslic3r/PrintConfig.cpp:2707 src/libslic3r/PrintConfig.cpp:2708
 msgid "Initial exposure time"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2578 src/libslic3r/PrintConfig.cpp:2579
+#: src/libslic3r/PrintConfig.cpp:2714 src/libslic3r/PrintConfig.cpp:2715
 msgid "Correction for expansion"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2585
+#: src/libslic3r/PrintConfig.cpp:2721
 msgid "SLA print material notes"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2586
+#: src/libslic3r/PrintConfig.cpp:2722
 msgid "You can put your notes regarding the SLA print material here."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2598 src/libslic3r/PrintConfig.cpp:2609
+#: src/libslic3r/PrintConfig.cpp:2734 src/libslic3r/PrintConfig.cpp:2745
 msgid "Default SLA material profile"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2620
+#: src/libslic3r/PrintConfig.cpp:2756
 msgid "Generate supports"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2622
+#: src/libslic3r/PrintConfig.cpp:2758
 msgid "Generate supports for the models"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2627
-msgid "Support head front diameter"
+#: src/libslic3r/PrintConfig.cpp:2763
+msgid "Pinhead front diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2629
+#: src/libslic3r/PrintConfig.cpp:2765
 msgid "Diameter of the pointing side of the head"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2636
-msgid "Support head penetration"
+#: src/libslic3r/PrintConfig.cpp:2772
+msgid "Head penetration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2638
+#: src/libslic3r/PrintConfig.cpp:2774
 msgid "How much the pinhead has to penetrate the model surface"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2645
-msgid "Support head width"
+#: src/libslic3r/PrintConfig.cpp:2781
+msgid "Pinhead width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2647
+#: src/libslic3r/PrintConfig.cpp:2783
 msgid "Width from the back sphere center to the front sphere center"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2655
-msgid "Support pillar diameter"
+#: src/libslic3r/PrintConfig.cpp:2791
+msgid "Pillar diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2657
+#: src/libslic3r/PrintConfig.cpp:2793
 msgid "Diameter in mm of the support pillars"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2665
+#: src/libslic3r/PrintConfig.cpp:2801
+msgid "Small pillar diameter percent"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2803
+msgid ""
+"The percentage of smaller pillars compared to the normal pillar diameter "
+"which are used in problematic areas where a normal pilla cannot fit."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2812
 msgid "Max bridges on a pillar"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2667
+#: src/libslic3r/PrintConfig.cpp:2814
 msgid ""
 "Maximum number of bridges that can be placed on a pillar. Bridges hold "
 "support point pinheads and connect to pillars as small branches."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2675
-msgid "Support pillar connection mode"
+#: src/libslic3r/PrintConfig.cpp:2822
+msgid "Pillar connection mode"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2676
+#: src/libslic3r/PrintConfig.cpp:2823
 msgid ""
 "Controls the bridge type between two neighboring pillars. Can be zig-zag, "
 "cross (double zig-zag) or dynamic which will automatically switch between "
 "the first two depending on the distance of the two pillars."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2684
+#: src/libslic3r/PrintConfig.cpp:2831
 msgid "Zig-Zag"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2685
+#: src/libslic3r/PrintConfig.cpp:2832
 msgid "Cross"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2686
+#: src/libslic3r/PrintConfig.cpp:2833
 msgid "Dynamic"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2698
+#: src/libslic3r/PrintConfig.cpp:2845
 msgid "Pillar widening factor"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2700
+#: src/libslic3r/PrintConfig.cpp:2847
 msgid ""
 "Merging bridges or pillars into another pillars can increase the radius. "
 "Zero means no increase, one means full increase."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2709
+#: src/libslic3r/PrintConfig.cpp:2856
 msgid "Support base diameter"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2711
+#: src/libslic3r/PrintConfig.cpp:2858
 msgid "Diameter in mm of the pillar base"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2719
+#: src/libslic3r/PrintConfig.cpp:2866
 msgid "Support base height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2721
+#: src/libslic3r/PrintConfig.cpp:2868
 msgid "The height of the pillar base cone"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2728
+#: src/libslic3r/PrintConfig.cpp:2875
 msgid "Support base safety distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2731
+#: src/libslic3r/PrintConfig.cpp:2878
 msgid ""
 "The minimum distance of the pillar base from the model in mm. Makes sense in "
 "zero elevation mode where a gap according to this parameter is inserted "
 "between the model and the pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2741
+#: src/libslic3r/PrintConfig.cpp:2888
 msgid "Critical angle"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2743
+#: src/libslic3r/PrintConfig.cpp:2890
 msgid "The default angle for connecting support sticks and junctions."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2751
+#: src/libslic3r/PrintConfig.cpp:2898
 msgid "Max bridge length"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2753
+#: src/libslic3r/PrintConfig.cpp:2900
 msgid "The max length of a bridge"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2760
+#: src/libslic3r/PrintConfig.cpp:2907
 msgid "Max pillar linking distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2762
+#: src/libslic3r/PrintConfig.cpp:2909
 msgid ""
 "The max distance of two pillars to get linked with each other. A zero value "
 "will prohibit pillar cascading."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2770
-msgid "Object elevation"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2772
+#: src/libslic3r/PrintConfig.cpp:2919
 msgid ""
 "How much the supports should lift up the supported object. If \"Pad around "
 "object\" is enabled, this value is ignored."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2783
+#: src/libslic3r/PrintConfig.cpp:2930
 msgid "This is a relative measure of support points density."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2789
+#: src/libslic3r/PrintConfig.cpp:2936
 msgid "Minimal distance of the support points"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2791
+#: src/libslic3r/PrintConfig.cpp:2938
 msgid "No support points will be placed closer than this threshold."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2797
+#: src/libslic3r/PrintConfig.cpp:2944
 msgid "Use pad"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2799
+#: src/libslic3r/PrintConfig.cpp:2946
 msgid "Add a pad underneath the supported model"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2804
+#: src/libslic3r/PrintConfig.cpp:2951
 msgid "Pad wall thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2806
+#: src/libslic3r/PrintConfig.cpp:2953
 msgid "The thickness of the pad and its optional cavity walls."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2814
+#: src/libslic3r/PrintConfig.cpp:2961
 msgid "Pad wall height"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2815
+#: src/libslic3r/PrintConfig.cpp:2962
 msgid ""
 "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
 "when enabling this feature, as some resins may produce an extreme suction "
@@ -9442,115 +10727,107 @@ msgid ""
 "difficult."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2828
+#: src/libslic3r/PrintConfig.cpp:2975
 msgid "Pad brim size"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2829
+#: src/libslic3r/PrintConfig.cpp:2976
 msgid "How far should the pad extend around the contained geometry"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2839
+#: src/libslic3r/PrintConfig.cpp:2986
 msgid "Max merge distance"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2841
+#: src/libslic3r/PrintConfig.cpp:2988
 msgid ""
 "Some objects can get along with a few smaller pads instead of a single big "
 "one. This parameter defines how far the center of two smaller pads should "
 "be. If theyare closer, they will get merged into one pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2861
+#: src/libslic3r/PrintConfig.cpp:3008
 msgid "Pad wall slope"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2863
+#: src/libslic3r/PrintConfig.cpp:3010
 msgid ""
 "The slope of the pad wall relative to the bed plane. 90 degrees means "
 "straight walls."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2872
-msgid "Pad around object"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2874
+#: src/libslic3r/PrintConfig.cpp:3021
 msgid "Create pad around object and ignore the support elevation"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2879
+#: src/libslic3r/PrintConfig.cpp:3026
 msgid "Pad around object everywhere"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2881
+#: src/libslic3r/PrintConfig.cpp:3028
 msgid "Force pad around object everywhere"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2886
+#: src/libslic3r/PrintConfig.cpp:3033
 msgid "Pad object gap"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2888
+#: src/libslic3r/PrintConfig.cpp:3035
 msgid ""
 "The gap between the object bottom and the generated pad in zero elevation "
 "mode."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2897
+#: src/libslic3r/PrintConfig.cpp:3044
 msgid "Pad object connector stride"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2899
+#: src/libslic3r/PrintConfig.cpp:3046
 msgid ""
 "Distance between two connector sticks which connect the object and the "
 "generated pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2906
+#: src/libslic3r/PrintConfig.cpp:3053
 msgid "Pad object connector width"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2908
+#: src/libslic3r/PrintConfig.cpp:3055
 msgid ""
 "Width of the connector sticks which connect the object and the generated pad."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2915
+#: src/libslic3r/PrintConfig.cpp:3062
 msgid "Pad object connector penetration"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2918
+#: src/libslic3r/PrintConfig.cpp:3065
 msgid "How much should the tiny connectors penetrate into the model body."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2925
+#: src/libslic3r/PrintConfig.cpp:3072
 msgid "Enable hollowing"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2927
+#: src/libslic3r/PrintConfig.cpp:3074
 msgid "Hollow out a model to have an empty interior"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2932
+#: src/libslic3r/PrintConfig.cpp:3079
 msgid "Wall thickness"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2934
+#: src/libslic3r/PrintConfig.cpp:3081
 msgid "Minimum wall thickness of a hollowed model."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2942
-msgid "Accuracy"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:2944
+#: src/libslic3r/PrintConfig.cpp:3091
 msgid ""
 "Performance vs accuracy of calculation. Lower values may produce unwanted "
 "artifacts."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:2954
+#: src/libslic3r/PrintConfig.cpp:3101
 msgid ""
 "Hollowing is done in two steps: first, an imaginary interior is calculated "
 "deeper (offset plus the closing distance) in the object and then it's "
@@ -9559,292 +10836,287 @@ msgid ""
 "most."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3342
+#: src/libslic3r/PrintConfig.cpp:3513
 msgid "Export OBJ"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3343
+#: src/libslic3r/PrintConfig.cpp:3514
 msgid "Export the model(s) as OBJ."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3354
+#: src/libslic3r/PrintConfig.cpp:3525
 msgid "Export SLA"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3355
+#: src/libslic3r/PrintConfig.cpp:3526
 msgid "Slice the model and export SLA printing layers as PNG."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3360
+#: src/libslic3r/PrintConfig.cpp:3531
 msgid "Export 3MF"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3361
+#: src/libslic3r/PrintConfig.cpp:3532
 msgid "Export the model(s) as 3MF."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3365
+#: src/libslic3r/PrintConfig.cpp:3536
 msgid "Export AMF"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3366
+#: src/libslic3r/PrintConfig.cpp:3537
 msgid "Export the model(s) as AMF."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3370
+#: src/libslic3r/PrintConfig.cpp:3541
 msgid "Export STL"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3371
+#: src/libslic3r/PrintConfig.cpp:3542
 msgid "Export the model(s) as STL."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3376
+#: src/libslic3r/PrintConfig.cpp:3547
 msgid "Slice the model and export toolpaths as G-code."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3381
+#: src/libslic3r/PrintConfig.cpp:3552
+msgid "G-code viewer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3553
+msgid "Visualize an already sliced and saved G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3558
 msgid "Slice"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3382
+#: src/libslic3r/PrintConfig.cpp:3559
 msgid ""
 "Slice the model as FFF or SLA based on the printer_technology configuration "
 "value."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3387
+#: src/libslic3r/PrintConfig.cpp:3564
 msgid "Help"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3388
+#: src/libslic3r/PrintConfig.cpp:3565
 msgid "Show this help."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3393
+#: src/libslic3r/PrintConfig.cpp:3570
 msgid "Help (FFF options)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3394
+#: src/libslic3r/PrintConfig.cpp:3571
 msgid "Show the full list of print/G-code configuration options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3398
+#: src/libslic3r/PrintConfig.cpp:3575
 msgid "Help (SLA options)"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3399
+#: src/libslic3r/PrintConfig.cpp:3576
 msgid "Show the full list of SLA print configuration options."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3403
+#: src/libslic3r/PrintConfig.cpp:3580
 msgid "Output Model Info"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3404
+#: src/libslic3r/PrintConfig.cpp:3581
 msgid "Write information about the model to the console."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3408
+#: src/libslic3r/PrintConfig.cpp:3585
 msgid "Save config file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3409
+#: src/libslic3r/PrintConfig.cpp:3586
 msgid "Save configuration to the specified file."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3419
+#: src/libslic3r/PrintConfig.cpp:3596
 msgid "Align XY"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3420
+#: src/libslic3r/PrintConfig.cpp:3597
 msgid "Align the model to the given point."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3425
+#: src/libslic3r/PrintConfig.cpp:3602
 msgid "Cut model at the given Z."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3446
+#: src/libslic3r/PrintConfig.cpp:3623
 msgid "Center"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3447
+#: src/libslic3r/PrintConfig.cpp:3624
 msgid "Center the print around the given center."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3451
+#: src/libslic3r/PrintConfig.cpp:3628
 msgid "Don't arrange"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3452
+#: src/libslic3r/PrintConfig.cpp:3629
 msgid ""
 "Do not rearrange the given models before merging and keep their original XY "
 "coordinates."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3455
+#: src/libslic3r/PrintConfig.cpp:3632
 msgid "Duplicate"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3456
+#: src/libslic3r/PrintConfig.cpp:3633
 msgid "Multiply copies by this factor."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3460
+#: src/libslic3r/PrintConfig.cpp:3637
 msgid "Duplicate by grid"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3461
+#: src/libslic3r/PrintConfig.cpp:3638
 msgid "Multiply copies by creating a grid."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3464
-msgid "Merge"
-msgstr ""
-
-#: src/libslic3r/PrintConfig.cpp:3465
+#: src/libslic3r/PrintConfig.cpp:3642
 msgid ""
 "Arrange the supplied models in a plate and merge them in a single model in "
 "order to perform actions once."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3470
+#: src/libslic3r/PrintConfig.cpp:3647
 msgid ""
 "Try to repair any non-manifold meshes (this option is implicitly added "
 "whenever we need to slice the model to perform the requested action)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3474
+#: src/libslic3r/PrintConfig.cpp:3651
 msgid "Rotation angle around the Z axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3478
+#: src/libslic3r/PrintConfig.cpp:3655
 msgid "Rotate around X"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3479
+#: src/libslic3r/PrintConfig.cpp:3656
 msgid "Rotation angle around the X axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3483
+#: src/libslic3r/PrintConfig.cpp:3660
 msgid "Rotate around Y"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3484
+#: src/libslic3r/PrintConfig.cpp:3661
 msgid "Rotation angle around the Y axis in degrees."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3489
+#: src/libslic3r/PrintConfig.cpp:3666
 msgid "Scaling factor or percentage."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3494
+#: src/libslic3r/PrintConfig.cpp:3671
 msgid ""
 "Detect unconnected parts in the given model(s) and split them into separate "
 "objects."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3497
+#: src/libslic3r/PrintConfig.cpp:3674
 msgid "Scale to Fit"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3498
+#: src/libslic3r/PrintConfig.cpp:3675
 msgid "Scale to fit the given volume."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3507
+#: src/libslic3r/PrintConfig.cpp:3684
 msgid "Ignore non-existent config files"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3508
+#: src/libslic3r/PrintConfig.cpp:3685
 msgid "Do not fail if a file supplied to --load does not exist."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3511
+#: src/libslic3r/PrintConfig.cpp:3688
 msgid "Load config file"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3512
+#: src/libslic3r/PrintConfig.cpp:3689
 msgid ""
 "Load configuration from the specified file. It can be used more than once to "
 "load options from multiple files."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3515
+#: src/libslic3r/PrintConfig.cpp:3692
 msgid "Output File"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3516
+#: src/libslic3r/PrintConfig.cpp:3693
 msgid ""
 "The file where the output will be written (if not specified, it will be "
 "based on the input file)."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3526
+#: src/libslic3r/PrintConfig.cpp:3698
+msgid ""
+"If enabled, the command line arguments are sent to an existing instance of "
+"GUI PrusaSlicer, or an existing PrusaSlicer window is activated. Overrides "
+"the \"single_instance\" configuration value from application preferences."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3709
 msgid "Data directory"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3527
+#: src/libslic3r/PrintConfig.cpp:3710
 msgid ""
 "Load and store settings at the given directory. This is useful for "
 "maintaining different profiles or including configurations from a network "
 "storage."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3530
+#: src/libslic3r/PrintConfig.cpp:3713
 msgid "Logging level"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3531
+#: src/libslic3r/PrintConfig.cpp:3714
 msgid ""
 "Sets logging sensitivity. 0:fatal, 1:error, 2:warning, 3:info, 4:debug, 5:"
 "trace\n"
 "For example. loglevel=2 logs fatal, error and warning level messages."
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3537
+#: src/libslic3r/PrintConfig.cpp:3720
 msgid "Render with a software renderer"
 msgstr ""
 
-#: src/libslic3r/PrintConfig.cpp:3538
+#: src/libslic3r/PrintConfig.cpp:3721
 msgid ""
 "Render with a software renderer. The bundled MESA software renderer is "
 "loaded instead of the default OpenGL driver."
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:108
+#: src/libslic3r/Zipper.cpp:27
+msgid "Error with zip archive"
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:114
 msgid "Processing triangulated mesh"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:152
+#: src/libslic3r/PrintObject.cpp:158
 msgid "Generating perimeters"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:255
+#: src/libslic3r/PrintObject.cpp:261
 msgid "Preparing infill"
 msgstr ""
 
-#: src/libslic3r/PrintObject.cpp:395
+#: src/libslic3r/PrintObject.cpp:422
 msgid "Generating support material"
 msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:348
-msgid "Height (mm)"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:350
-msgid "Width (mm)"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:352
-msgid "Speed (mm/s)"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:354
-msgid "Fan Speed (%)"
-msgstr ""
-
-#: src/libslic3r/GCode/PreviewData.cpp:356
-msgid "Volumetric flow rate (mm³/s)"
-msgstr ""
diff --git a/resources/localization/list.txt b/resources/localization/list.txt
index 3c2a95638..2f5ae8133 100644
--- a/resources/localization/list.txt
+++ b/resources/localization/list.txt
@@ -1,5 +1,4 @@
 src/slic3r/GUI/AboutDialog.cpp
-src/slic3r/GUI/AppConfig.cpp
 src/slic3r/GUI/BackgroundSlicingProcess.cpp
 src/slic3r/GUI/BedShapeDialog.cpp
 src/slic3r/GUI/BedShapeDialog.hpp
@@ -9,19 +8,23 @@ src/slic3r/GUI/ConfigManipulation.cpp
 src/slic3r/GUI/ConfigSnapshotDialog.cpp
 src/slic3r/GUI/ConfigWizard.cpp
 src/slic3r/GUI/DoubleSlider.cpp
+src/slic3r/GUI/ExtraRenderers.cpp
 src/slic3r/GUI/ExtruderSequenceDialog.cpp
 src/slic3r/GUI/Field.cpp
 src/slic3r/GUI/FirmwareDialog.cpp
+src/slic3r/GUI/GCodeViewer.cpp
 src/slic3r/GUI/GLCanvas3D.cpp
-src/slic3r/GUI/GLCanvas3DManager.cpp
 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp
+src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp
 src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp
 src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp
 src/slic3r/GUI/Gizmos/GLGizmoMove.cpp
 src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp
 src/slic3r/GUI/Gizmos/GLGizmoScale.cpp
+src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp
 src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp
 src/slic3r/GUI/Gizmos/GLGizmosManager.cpp
+src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp
 src/slic3r/GUI/GUI.cpp
 src/slic3r/GUI/GUI_App.cpp
 src/slic3r/GUI/GUI_ObjectLayers.cpp
@@ -29,25 +32,35 @@ src/slic3r/GUI/GUI_ObjectList.cpp
 src/slic3r/GUI/GUI_ObjectManipulation.cpp
 src/slic3r/GUI/GUI_ObjectSettings.cpp
 src/slic3r/GUI/GUI_Preview.cpp
-src/slic3r/GUI/Job.hpp
+src/slic3r/GUI/ImGuiWrapper.cpp
+src/slic3r/GUI/Jobs/ArrangeJob.cpp
+src/slic3r/GUI/Jobs/Job.cpp
+src/slic3r/GUI/Jobs/RotoptimizeJob.cpp
+src/slic3r/GUI/Jobs/SLAImportJob.cpp
 src/slic3r/GUI/KBShortcutsDialog.cpp
 src/slic3r/GUI/MainFrame.cpp
 src/slic3r/GUI/Mouse3DController.cpp
 src/slic3r/GUI/MsgDialog.cpp
+src/slic3r/GUI/NotificationManager.hpp
+src/slic3r/GUI/NotificationManager.cpp
 src/slic3r/GUI/ObjectDataViewModel.cpp
+src/slic3r/GUI/OpenGLManager.cpp
 src/slic3r/GUI/OptionsGroup.cpp
+src/slic3r/GUI/PhysicalPrinterDialog.cpp
 src/slic3r/GUI/Plater.cpp
 src/slic3r/GUI/Preferences.cpp
-src/slic3r/GUI/Preset.cpp
-src/slic3r/GUI/PresetBundle.cpp
+src/slic3r/GUI/PresetComboBoxes.cpp
 src/slic3r/GUI/PresetHints.cpp
 src/slic3r/GUI/PrintHostDialogs.cpp
 src/slic3r/GUI/ProgressStatusBar.cpp
 src/slic3r/GUI/RammingChart.cpp
+src/slic3r/GUI/SavePresetDialog.cpp
+src/slic3r/GUI/Search.cpp
 src/slic3r/GUI/Selection.cpp
 src/slic3r/GUI/SysInfoDialog.cpp
 src/slic3r/GUI/Tab.cpp
 src/slic3r/GUI/Tab.hpp
+src/slic3r/GUI/UnsavedChangesDialog.cpp
 src/slic3r/GUI/UpdateDialogs.cpp
 src/slic3r/GUI/WipeTowerDialog.cpp
 src/slic3r/GUI/wxExtensions.cpp
@@ -57,18 +70,22 @@ src/slic3r/Utils/FixModelByWin10.cpp
 src/slic3r/Utils/FlashAir.cpp
 src/slic3r/Utils/OctoPrint.cpp
 src/slic3r/Utils/PresetUpdater.cpp
-src/libslic3r/SLA/Pad.cpp
-src/libslic3r/SLA/Hollowing.cpp
-src/libslic3r/Zipper.cpp
+src/slic3r/Utils/Http.cpp
+src/slic3r/Utils/Process.cpp
 src/libslic3r/GCode.cpp
 src/libslic3r/ExtrusionEntity.cpp
 src/libslic3r/Flow.cpp
 src/libslic3r/Format/3mf.cpp
 src/libslic3r/Format/AMF.cpp
+src/libslic3r/GCode/PreviewData.cpp
+src/libslic3r/miniz_extension.cpp
+src/libslic3r/Preset.cpp
 src/libslic3r/Print.cpp
+src/libslic3r/SLA/Pad.cpp
+src/libslic3r/SLA/Hollowing.cpp
 src/libslic3r/SLAPrint.cpp
 src/libslic3r/SLAPrintSteps.cpp
 src/libslic3r/PrintBase.cpp
 src/libslic3r/PrintConfig.cpp
+src/libslic3r/Zipper.cpp
 src/libslic3r/PrintObject.cpp
-src/libslic3r/GCode/PreviewData.cpp
diff --git a/src/slic3r/CMakeLists.txt b/src/slic3r/CMakeLists.txt
index c162f0da6..7e78f700d 100644
--- a/src/slic3r/CMakeLists.txt
+++ b/src/slic3r/CMakeLists.txt
@@ -87,6 +87,8 @@ set(SLIC3R_GUI_SOURCES
     GUI/Plater.hpp
     GUI/PresetComboBoxes.hpp
     GUI/PresetComboBoxes.cpp
+    GUI/SavePresetDialog.hpp
+    GUI/SavePresetDialog.cpp
     GUI/PhysicalPrinterDialog.hpp
     GUI/PhysicalPrinterDialog.cpp
     GUI/GUI_ObjectList.cpp
diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp
index 56068c20e..59ee5c2b2 100644
--- a/src/slic3r/GUI/GUI_App.cpp
+++ b/src/slic3r/GUI/GUI_App.cpp
@@ -63,7 +63,7 @@
 #include "InstanceCheck.hpp"
 #include "NotificationManager.hpp"
 #include "UnsavedChangesDialog.hpp"
-#include "PresetComboBoxes.hpp"
+#include "SavePresetDialog.hpp"
 
 #include "BitmapCache.hpp"
 
diff --git a/src/slic3r/GUI/PresetComboBoxes.cpp b/src/slic3r/GUI/PresetComboBoxes.cpp
index f9b088413..99785e8fe 100644
--- a/src/slic3r/GUI/PresetComboBoxes.cpp
+++ b/src/slic3r/GUI/PresetComboBoxes.cpp
@@ -30,6 +30,7 @@
 #include "../Utils/UndoRedo.hpp"
 #include "BitmapCache.hpp"
 #include "PhysicalPrinterDialog.hpp"
+#include "SavePresetDialog.hpp"
 
 using Slic3r::GUI::format_wxstr;
 
@@ -1022,348 +1023,4 @@ void TabPresetComboBox::update_dirty()
 #endif /* __APPLE __ */
 }
 
-
-//-----------------------------------------------
-//          SavePresetDialog::Item
-//-----------------------------------------------
-
-SavePresetDialog::Item::Item(Preset::Type type, const std::string& suffix, wxBoxSizer* sizer, SavePresetDialog* parent):
-    m_type(type),
-    m_parent(parent)
-{
-    Tab* tab = wxGetApp().get_tab(m_type);
-    assert(tab);
-    m_presets = tab->get_presets();
-
-    const Preset& sel_preset = m_presets->get_selected_preset();
-    std::string preset_name =   sel_preset.is_default ? "Untitled" :
-                                sel_preset.is_system ? (boost::format(("%1% - %2%")) % sel_preset.name % suffix).str() :
-                                sel_preset.name;
-
-    // if name contains extension
-    if (boost::iends_with(preset_name, ".ini")) {
-        size_t len = preset_name.length() - 4;
-        preset_name.resize(len);
-    }
-
-    std::vector<std::string> values;
-    for (const Preset& preset : *m_presets) {
-        if (preset.is_default || preset.is_system || preset.is_external)
-            continue;
-        values.push_back(preset.name);
-    }
-
-    wxStaticText* label_top = new wxStaticText(m_parent, wxID_ANY, from_u8((boost::format(_utf8(L("Save %s as:"))) % into_u8(tab->title())).str()));
-
-    m_valid_bmp = new wxStaticBitmap(m_parent, wxID_ANY, create_scaled_bitmap("tick_mark", m_parent));
-
-    m_combo = new wxComboBox(m_parent, wxID_ANY, from_u8(preset_name), wxDefaultPosition, wxSize(35 * wxGetApp().em_unit(), -1));
-    for (const std::string& value : values)
-        m_combo->Append(from_u8(value));
-
-    m_combo->Bind(wxEVT_TEXT, [this](wxCommandEvent&) { update(); });
-#ifdef __WXOSX__
-    // Under OSX wxEVT_TEXT wasn't invoked after change selection in combobox,
-    // So process wxEVT_COMBOBOX too
-    m_combo->Bind(wxEVT_COMBOBOX, [this](wxCommandEvent&) { update(); });
-#endif //__WXOSX__
-
-    m_valid_label = new wxStaticText(m_parent, wxID_ANY, "");
-    m_valid_label->SetFont(wxGetApp().bold_font());
-
-    wxBoxSizer* combo_sizer = new wxBoxSizer(wxHORIZONTAL);
-    combo_sizer->Add(m_valid_bmp,   0, wxALIGN_CENTER_VERTICAL | wxRIGHT, BORDER_W);
-    combo_sizer->Add(m_combo,       1, wxEXPAND, BORDER_W);
-
-    sizer->Add(label_top,       0, wxEXPAND | wxTOP| wxBOTTOM, BORDER_W);
-    sizer->Add(combo_sizer,     0, wxEXPAND | wxBOTTOM, BORDER_W);
-    sizer->Add(m_valid_label,   0, wxEXPAND | wxLEFT,   3*BORDER_W);
-
-    if (m_type == Preset::TYPE_PRINTER)
-        m_parent->add_info_for_edit_ph_printer(sizer);
-
-    update();
-}
-
-void SavePresetDialog::Item::update()
-{
-    m_preset_name = into_u8(m_combo->GetValue());
-
-    m_valid_type = Valid;
-    wxString info_line;
-
-    const char* unusable_symbols = "<>[]:/\\|?*\"";
-
-    const std::string unusable_suffix = PresetCollection::get_suffix_modified();//"(modified)";
-    for (size_t i = 0; i < std::strlen(unusable_symbols); i++) {
-        if (m_preset_name.find_first_of(unusable_symbols[i]) != std::string::npos) {
-            info_line = _L("The supplied name is not valid;") + "\n" +
-                        _L("the following characters are not allowed:") + " " + unusable_symbols;
-            m_valid_type = NoValid;
-            break;
-        }
-    }
-
-    if (m_valid_type == Valid && m_preset_name.find(unusable_suffix) != std::string::npos) {
-        info_line = _L("The supplied name is not valid;") + "\n" +
-                    _L("the following suffix is not allowed:") + "\n\t" +
-                    from_u8(PresetCollection::get_suffix_modified());
-        m_valid_type = NoValid;
-    }
-
-    if (m_valid_type == Valid && m_preset_name == "- default -") {
-        info_line = _L("The supplied name is not available.");
-        m_valid_type = NoValid;
-    }
-
-    const Preset* existing = m_presets->find_preset(m_preset_name, false);
-    if (m_valid_type == Valid && existing && (existing->is_default || existing->is_system)) {
-        info_line = _L("Cannot overwrite a system profile.");
-        m_valid_type = NoValid;
-    }
-
-    if (m_valid_type == Valid && existing && (existing->is_external)) {
-        info_line = _L("Cannot overwrite an external profile.");
-        m_valid_type = NoValid;
-    }
-
-    if (m_valid_type == Valid && existing && m_preset_name != m_presets->get_selected_preset_name())
-    {
-        info_line = from_u8((boost::format(_u8L("Preset with name \"%1%\" already exists.")) % m_preset_name).str());
-        if (!existing->is_compatible)
-            info_line += "\n" + _L("And selected preset is imcopatible with selected printer.");
-        info_line += "\n" + _L("Note: This preset will be replaced after saving");
-        m_valid_type = Warning;
-    }
-
-    if (m_valid_type == Valid && m_preset_name.empty()) {
-        info_line = _L("The empty name is not available.");
-        m_valid_type = NoValid;
-    }
-
-    m_valid_label->SetLabel(info_line);
-    m_valid_label->Show(!info_line.IsEmpty());
-
-    update_valid_bmp();
-
-    if (m_type == Preset::TYPE_PRINTER)
-        m_parent->update_info_for_edit_ph_printer(m_preset_name);
-
-    m_parent->layout();
-}
-
-void SavePresetDialog::Item::update_valid_bmp()
-{
-    std::string bmp_name =  m_valid_type == Warning ? "exclamation" :
-                            m_valid_type == NoValid ? "cross"       : "tick_mark" ;
-    m_valid_bmp->SetBitmap(create_scaled_bitmap(bmp_name, m_parent));
-}
-
-void SavePresetDialog::Item::accept()
-{
-    if (m_valid_type == Warning)
-        m_presets->delete_preset(m_preset_name);
-}
-
-
-//-----------------------------------------------
-//          SavePresetDialog
-//-----------------------------------------------
-
-SavePresetDialog::SavePresetDialog(Preset::Type type, std::string suffix)
-    : DPIDialog(nullptr, wxID_ANY, _L("Save preset"), wxDefaultPosition, wxSize(45 * wxGetApp().em_unit(), 5 * wxGetApp().em_unit()), wxDEFAULT_DIALOG_STYLE | wxICON_WARNING | wxRESIZE_BORDER)
-{
-    build(std::vector<Preset::Type>{type}, suffix);
-}
-
-SavePresetDialog::SavePresetDialog(std::vector<Preset::Type> types, std::string suffix)
-    : DPIDialog(nullptr, wxID_ANY, _L("Save preset"), wxDefaultPosition, wxSize(45 * wxGetApp().em_unit(), 5 * wxGetApp().em_unit()), wxDEFAULT_DIALOG_STYLE | wxICON_WARNING | wxRESIZE_BORDER)
-{
-    build(types, suffix);
-}
-
-SavePresetDialog::~SavePresetDialog()
-{
-    for (auto  item : m_items) {
-        delete item;
-    }
-}
-
-void SavePresetDialog::build(std::vector<Preset::Type> types, std::string suffix)
-{
-    SetBackgroundColour(wxSystemSettings::GetColour(wxSYS_COLOUR_WINDOW));
-#if ENABLE_WX_3_1_3_DPI_CHANGED_EVENT && defined(__WXMSW__)
-    // ys_FIXME! temporary workaround for correct font scaling
-    // Because of from wxWidgets 3.1.3 auto rescaling is implemented for the Fonts,
-    // From the very beginning set dialog font to the wxSYS_DEFAULT_GUI_FONT
-    this->SetFont(wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT));
-#endif // ENABLE_WX_3_1_3_DPI_CHANGED_EVENT
-
-    if (suffix.empty())
-        suffix = _CTX_utf8(L_CONTEXT("Copy", "PresetName"), "PresetName");
-
-    wxBoxSizer* topSizer = new wxBoxSizer(wxVERTICAL);
-
-    m_presets_sizer = new wxBoxSizer(wxVERTICAL);
-
-    // Add first item
-    for (Preset::Type type : types)
-        AddItem(type, suffix);
-
-    // Add dialog's buttons
-    wxStdDialogButtonSizer* btns = this->CreateStdDialogButtonSizer(wxOK | wxCANCEL);
-    wxButton* btnOK = static_cast<wxButton*>(this->FindWindowById(wxID_OK, this));
-    btnOK->Bind(wxEVT_BUTTON,    [this](wxCommandEvent&)        { accept(); });
-    btnOK->Bind(wxEVT_UPDATE_UI, [this](wxUpdateUIEvent& evt)   { evt.Enable(enable_ok_btn()); });
-
-    topSizer->Add(m_presets_sizer,  0, wxEXPAND | wxALL, BORDER_W);
-    topSizer->Add(btns,             0, wxEXPAND | wxALL, BORDER_W);
-
-    SetSizer(topSizer);
-    topSizer->SetSizeHints(this);
-
-    this->CenterOnScreen();
-}
-
-void SavePresetDialog::AddItem(Preset::Type type, const std::string& suffix)
-{
-    m_items.emplace_back(new Item{type, suffix, m_presets_sizer, this});
-}
-
-std::string SavePresetDialog::get_name()
-{
-    return m_items.front()->preset_name();
-}
-
-std::string SavePresetDialog::get_name(Preset::Type type)
-{
-    for (const Item* item : m_items)
-        if (item->type() == type)
-            return item->preset_name();
-    return "";
-}
-
-bool SavePresetDialog::enable_ok_btn() const
-{
-    for (const Item* item : m_items)
-        if (!item->is_valid())
-            return false;
-
-    return true;
-}
-
-void SavePresetDialog::add_info_for_edit_ph_printer(wxBoxSizer* sizer)
-{
-    PhysicalPrinterCollection& printers = wxGetApp().preset_bundle->physical_printers;
-    m_ph_printer_name = printers.get_selected_printer_name();
-    m_old_preset_name = printers.get_selected_printer_preset_name();
-
-    wxString msg_text = from_u8((boost::format(_u8L("You have selected physical printer \"%1%\" \n"
-                                                    "with related printer preset \"%2%\"")) %
-                                                    m_ph_printer_name % m_old_preset_name).str());
-    m_label = new wxStaticText(this, wxID_ANY, msg_text);
-    m_label->SetFont(wxGetApp().bold_font());
-
-    wxString choices[] = {"","",""};
-
-    m_action_radio_box = new wxRadioBox(this, wxID_ANY, "", wxDefaultPosition, wxDefaultSize,
-                                        WXSIZEOF(choices), choices, 3, wxRA_SPECIFY_ROWS);
-    m_action_radio_box->SetSelection(0);
-    m_action_radio_box->Bind(wxEVT_RADIOBOX, [this](wxCommandEvent& e) {
-        m_action = (ActionType)e.GetSelection(); });
-    m_action = ChangePreset;
-
-    m_radio_sizer = new wxBoxSizer(wxHORIZONTAL);
-    m_radio_sizer->Add(m_action_radio_box, 1, wxEXPAND | wxTOP, 2*BORDER_W);
-
-    sizer->Add(m_label,         0, wxEXPAND | wxLEFT | wxTOP,   3*BORDER_W);
-    sizer->Add(m_radio_sizer,   1, wxEXPAND | wxLEFT,           3*BORDER_W);
-}
-
-void SavePresetDialog::update_info_for_edit_ph_printer(const std::string& preset_name)
-{
-    bool show = wxGetApp().preset_bundle->physical_printers.has_selection() && m_old_preset_name != preset_name;
-
-    m_label->Show(show);
-    m_radio_sizer->ShowItems(show);
-    if (!show) {
-        this->SetMinSize(wxSize(100,50));
-        return;
-    }
-
-    wxString msg_text = from_u8((boost::format(_u8L("What would you like to do with \"%1%\" preset after saving?")) % preset_name).str());
-    m_action_radio_box->SetLabel(msg_text);
-
-    wxString choices[] = { from_u8((boost::format(_u8L("Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"")) % m_old_preset_name % preset_name % m_ph_printer_name).str()),
-                           from_u8((boost::format(_u8L("Add \"%1%\" as a next preset for the the physical printer \"%2%\"")) % preset_name % m_ph_printer_name).str()),
-                           from_u8((boost::format(_u8L("Just switch to \"%1%\" preset")) % preset_name).str()) };
-
-    int n = 0;
-    for(const wxString& label: choices)
-        m_action_radio_box->SetString(n++, label);
-}
-
-void SavePresetDialog::layout()
-{
-    this->Layout();
-    this->Fit();
-}
-
-void SavePresetDialog::on_dpi_changed(const wxRect& suggested_rect)
-{
-    const int& em = em_unit();
-
-    msw_buttons_rescale(this, em, { wxID_OK, wxID_CANCEL });
-
-    for (Item* item : m_items)
-        item->update_valid_bmp();
-
-    //const wxSize& size = wxSize(45 * em, 35 * em);
-    SetMinSize(/*size*/wxSize(100, 50));
-
-    Fit();
-    Refresh();
-}
-
-void SavePresetDialog::update_physical_printers(const std::string& preset_name)
-{
-    if (m_action == UndefAction)
-        return;
-
-    PhysicalPrinterCollection& physical_printers = wxGetApp().preset_bundle->physical_printers;
-    if (!physical_printers.has_selection())
-        return;
-
-    std::string printer_preset_name = physical_printers.get_selected_printer_preset_name();
-
-    if (m_action == Switch)
-        // unselect physical printer, if it was selected
-        physical_printers.unselect_printer();
-    else
-    {
-        PhysicalPrinter printer = physical_printers.get_selected_printer();
-
-        if (m_action == ChangePreset)
-            printer.delete_preset(printer_preset_name);
-
-        if (printer.add_preset(preset_name))
-            physical_printers.save_printer(printer);
-
-        physical_printers.select_printer(printer.get_full_name(preset_name));
-    }    
-}
-
-void SavePresetDialog::accept()
-{
-    for (Item* item : m_items) {
-        item->accept();
-        if (item->type() == Preset::TYPE_PRINTER)
-            update_physical_printers(item->preset_name());
-    }
-
-    EndModal(wxID_OK);
-}
-
-
-
 }}    // namespace Slic3r::GUI
diff --git a/src/slic3r/GUI/PresetComboBoxes.hpp b/src/slic3r/GUI/PresetComboBoxes.hpp
index e33a2d753..25a2aa94a 100644
--- a/src/slic3r/GUI/PresetComboBoxes.hpp
+++ b/src/slic3r/GUI/PresetComboBoxes.hpp
@@ -187,91 +187,6 @@ public:
     Preset::Type        type()      const { return m_type; }
 };
 
-
-//------------------------------------------------
-//          SavePresetDialog
-//------------------------------------------------
-
-class SavePresetDialog : public DPIDialog
-{
-    enum ActionType
-    {
-        ChangePreset,
-        AddPreset,
-        Switch, 
-        UndefAction
-    };
-
-    struct Item
-    {
-        enum ValidationType
-        {
-            Valid,
-            NoValid,
-            Warning
-        };
-
-        Item(Preset::Type type, const std::string& suffix, wxBoxSizer* sizer, SavePresetDialog* parent);
-
-        void            update_valid_bmp();
-        void            accept();
-
-        bool            is_valid()      const { return m_valid_type != NoValid; }
-        Preset::Type    type()          const { return m_type; }
-        std::string     preset_name()   const { return m_preset_name; }
-
-    private:
-        Preset::Type    m_type;
-        ValidationType  m_valid_type;
-        std::string		m_preset_name;
-
-        SavePresetDialog*   m_parent        {nullptr};
-        wxStaticBitmap*     m_valid_bmp     {nullptr};
-        wxComboBox*         m_combo         {nullptr};
-        wxStaticText*       m_valid_label   {nullptr};
-
-        PresetCollection*   m_presets       {nullptr};
-
-        void update();
-    };
-
-    std::vector<Item*>   m_items;
-
-    wxBoxSizer*         m_presets_sizer     {nullptr};
-    wxStaticText*       m_label             {nullptr};
-    wxRadioBox*         m_action_radio_box  {nullptr};
-    wxBoxSizer*         m_radio_sizer       {nullptr};  
-    ActionType          m_action            {UndefAction};
-
-    std::string         m_ph_printer_name;
-    std::string         m_old_preset_name;
-
-public:
-
-    SavePresetDialog(Preset::Type type, std::string suffix = "");
-    SavePresetDialog(std::vector<Preset::Type> types, std::string suffix = "");
-    ~SavePresetDialog();
-
-    void AddItem(Preset::Type type, const std::string& suffix);
-
-    std::string get_name();
-    std::string get_name(Preset::Type type);
-
-    bool enable_ok_btn() const;
-    void add_info_for_edit_ph_printer(wxBoxSizer *sizer);
-    void update_info_for_edit_ph_printer(const std::string &preset_name);
-    void layout();
-
-protected:
-    void on_dpi_changed(const wxRect& suggested_rect) override;
-    void on_sys_color_changed() override {}
-
-private:
-    void build(std::vector<Preset::Type> types, std::string suffix = "");
-    void update_physical_printers(const std::string& preset_name);
-    void accept();
-};
-
 } // namespace GUI
 } // namespace Slic3r
 
diff --git a/src/slic3r/GUI/SavePresetDialog.cpp b/src/slic3r/GUI/SavePresetDialog.cpp
new file mode 100644
index 000000000..79ce296b8
--- /dev/null
+++ b/src/slic3r/GUI/SavePresetDialog.cpp
@@ -0,0 +1,368 @@
+#include "SavePresetDialog.hpp"
+
+#include <cstddef>
+#include <vector>
+#include <string>
+#include <boost/algorithm/string.hpp>
+
+#include <wx/sizer.h>
+#include <wx/stattext.h>
+#include <wx/wupdlock.h>
+
+#include "libslic3r/PresetBundle.hpp"
+
+#include "GUI.hpp"
+#include "GUI_App.hpp"
+#include "format.hpp"
+#include "Tab.hpp"
+
+using Slic3r::GUI::format_wxstr;
+
+namespace Slic3r {
+namespace GUI {
+
+#define BORDER_W 10
+
+
+//-----------------------------------------------
+//          SavePresetDialog::Item
+//-----------------------------------------------
+
+SavePresetDialog::Item::Item(Preset::Type type, const std::string& suffix, wxBoxSizer* sizer, SavePresetDialog* parent):
+    m_type(type),
+    m_parent(parent)
+{
+    Tab* tab = wxGetApp().get_tab(m_type);
+    assert(tab);
+    m_presets = tab->get_presets();
+
+    const Preset& sel_preset = m_presets->get_selected_preset();
+    std::string preset_name =   sel_preset.is_default ? "Untitled" :
+                                sel_preset.is_system ? (boost::format(("%1% - %2%")) % sel_preset.name % suffix).str() :
+                                sel_preset.name;
+
+    // if name contains extension
+    if (boost::iends_with(preset_name, ".ini")) {
+        size_t len = preset_name.length() - 4;
+        preset_name.resize(len);
+    }
+
+    std::vector<std::string> values;
+    for (const Preset& preset : *m_presets) {
+        if (preset.is_default || preset.is_system || preset.is_external)
+            continue;
+        values.push_back(preset.name);
+    }
+
+    wxStaticText* label_top = new wxStaticText(m_parent, wxID_ANY, from_u8((boost::format(_utf8(L("Save %s as:"))) % into_u8(tab->title())).str()));
+
+    m_valid_bmp = new wxStaticBitmap(m_parent, wxID_ANY, create_scaled_bitmap("tick_mark", m_parent));
+
+    m_combo = new wxComboBox(m_parent, wxID_ANY, from_u8(preset_name), wxDefaultPosition, wxSize(35 * wxGetApp().em_unit(), -1));
+    for (const std::string& value : values)
+        m_combo->Append(from_u8(value));
+
+    m_combo->Bind(wxEVT_TEXT, [this](wxCommandEvent&) { update(); });
+#ifdef __WXOSX__
+    // Under OSX wxEVT_TEXT wasn't invoked after change selection in combobox,
+    // So process wxEVT_COMBOBOX too
+    m_combo->Bind(wxEVT_COMBOBOX, [this](wxCommandEvent&) { update(); });
+#endif //__WXOSX__
+
+    m_valid_label = new wxStaticText(m_parent, wxID_ANY, "");
+    m_valid_label->SetFont(wxGetApp().bold_font());
+
+    wxBoxSizer* combo_sizer = new wxBoxSizer(wxHORIZONTAL);
+    combo_sizer->Add(m_valid_bmp,   0, wxALIGN_CENTER_VERTICAL | wxRIGHT, BORDER_W);
+    combo_sizer->Add(m_combo,       1, wxEXPAND, BORDER_W);
+
+    sizer->Add(label_top,       0, wxEXPAND | wxTOP| wxBOTTOM, BORDER_W);
+    sizer->Add(combo_sizer,     0, wxEXPAND | wxBOTTOM, BORDER_W);
+    sizer->Add(m_valid_label,   0, wxEXPAND | wxLEFT,   3*BORDER_W);
+
+    if (m_type == Preset::TYPE_PRINTER)
+        m_parent->add_info_for_edit_ph_printer(sizer);
+
+    update();
+}
+
+void SavePresetDialog::Item::update()
+{
+    m_preset_name = into_u8(m_combo->GetValue());
+
+    m_valid_type = Valid;
+    wxString info_line;
+
+    const char* unusable_symbols = "<>[]:/\\|?*\"";
+
+    const std::string unusable_suffix = PresetCollection::get_suffix_modified();//"(modified)";
+    for (size_t i = 0; i < std::strlen(unusable_symbols); i++) {
+        if (m_preset_name.find_first_of(unusable_symbols[i]) != std::string::npos) {
+            info_line = _L("The supplied name is not valid;") + "\n" +
+                        _L("the following characters are not allowed:") + " " + unusable_symbols;
+            m_valid_type = NoValid;
+            break;
+        }
+    }
+
+    if (m_valid_type == Valid && m_preset_name.find(unusable_suffix) != std::string::npos) {
+        info_line = _L("The supplied name is not valid;") + "\n" +
+                    _L("the following suffix is not allowed:") + "\n\t" +
+                    from_u8(PresetCollection::get_suffix_modified());
+        m_valid_type = NoValid;
+    }
+
+    if (m_valid_type == Valid && m_preset_name == "- default -") {
+        info_line = _L("The supplied name is not available.");
+        m_valid_type = NoValid;
+    }
+
+    const Preset* existing = m_presets->find_preset(m_preset_name, false);
+    if (m_valid_type == Valid && existing && (existing->is_default || existing->is_system)) {
+        info_line = _L("Cannot overwrite a system profile.");
+        m_valid_type = NoValid;
+    }
+
+    if (m_valid_type == Valid && existing && (existing->is_external)) {
+        info_line = _L("Cannot overwrite an external profile.");
+        m_valid_type = NoValid;
+    }
+
+    if (m_valid_type == Valid && existing && m_preset_name != m_presets->get_selected_preset_name())
+    {
+        info_line = from_u8((boost::format(_u8L("Preset with name \"%1%\" already exists.")) % m_preset_name).str());
+        if (!existing->is_compatible)
+            info_line += "\n" + _L("And selected preset is imcopatible with selected printer.");
+        info_line += "\n" + _L("Note: This preset will be replaced after saving");
+        m_valid_type = Warning;
+    }
+
+    if (m_valid_type == Valid && m_preset_name.empty()) {
+        info_line = _L("The empty name is not available.");
+        m_valid_type = NoValid;
+    }
+
+    m_valid_label->SetLabel(info_line);
+    m_valid_label->Show(!info_line.IsEmpty());
+
+    update_valid_bmp();
+
+    if (m_type == Preset::TYPE_PRINTER)
+        m_parent->update_info_for_edit_ph_printer(m_preset_name);
+
+    m_parent->layout();
+}
+
+void SavePresetDialog::Item::update_valid_bmp()
+{
+    std::string bmp_name =  m_valid_type == Warning ? "exclamation" :
+                            m_valid_type == NoValid ? "cross"       : "tick_mark" ;
+    m_valid_bmp->SetBitmap(create_scaled_bitmap(bmp_name, m_parent));
+}
+
+void SavePresetDialog::Item::accept()
+{
+    if (m_valid_type == Warning)
+        m_presets->delete_preset(m_preset_name);
+}
+
+
+//-----------------------------------------------
+//          SavePresetDialog
+//-----------------------------------------------
+
+SavePresetDialog::SavePresetDialog(Preset::Type type, std::string suffix)
+    : DPIDialog(nullptr, wxID_ANY, _L("Save preset"), wxDefaultPosition, wxSize(45 * wxGetApp().em_unit(), 5 * wxGetApp().em_unit()), wxDEFAULT_DIALOG_STYLE | wxICON_WARNING | wxRESIZE_BORDER)
+{
+    build(std::vector<Preset::Type>{type}, suffix);
+}
+
+SavePresetDialog::SavePresetDialog(std::vector<Preset::Type> types, std::string suffix)
+    : DPIDialog(nullptr, wxID_ANY, _L("Save preset"), wxDefaultPosition, wxSize(45 * wxGetApp().em_unit(), 5 * wxGetApp().em_unit()), wxDEFAULT_DIALOG_STYLE | wxICON_WARNING | wxRESIZE_BORDER)
+{
+    build(types, suffix);
+}
+
+SavePresetDialog::~SavePresetDialog()
+{
+    for (auto  item : m_items) {
+        delete item;
+    }
+}
+
+void SavePresetDialog::build(std::vector<Preset::Type> types, std::string suffix)
+{
+    SetBackgroundColour(wxSystemSettings::GetColour(wxSYS_COLOUR_WINDOW));
+#if ENABLE_WX_3_1_3_DPI_CHANGED_EVENT && defined(__WXMSW__)
+    // ys_FIXME! temporary workaround for correct font scaling
+    // Because of from wxWidgets 3.1.3 auto rescaling is implemented for the Fonts,
+    // From the very beginning set dialog font to the wxSYS_DEFAULT_GUI_FONT
+    this->SetFont(wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT));
+#endif // ENABLE_WX_3_1_3_DPI_CHANGED_EVENT
+
+    if (suffix.empty())
+        suffix = _CTX_utf8(L_CONTEXT("Copy", "PresetName"), "PresetName");
+
+    wxBoxSizer* topSizer = new wxBoxSizer(wxVERTICAL);
+
+    m_presets_sizer = new wxBoxSizer(wxVERTICAL);
+
+    // Add first item
+    for (Preset::Type type : types)
+        AddItem(type, suffix);
+
+    // Add dialog's buttons
+    wxStdDialogButtonSizer* btns = this->CreateStdDialogButtonSizer(wxOK | wxCANCEL);
+    wxButton* btnOK = static_cast<wxButton*>(this->FindWindowById(wxID_OK, this));
+    btnOK->Bind(wxEVT_BUTTON,    [this](wxCommandEvent&)        { accept(); });
+    btnOK->Bind(wxEVT_UPDATE_UI, [this](wxUpdateUIEvent& evt)   { evt.Enable(enable_ok_btn()); });
+
+    topSizer->Add(m_presets_sizer,  0, wxEXPAND | wxALL, BORDER_W);
+    topSizer->Add(btns,             0, wxEXPAND | wxALL, BORDER_W);
+
+    SetSizer(topSizer);
+    topSizer->SetSizeHints(this);
+
+    this->CenterOnScreen();
+}
+
+void SavePresetDialog::AddItem(Preset::Type type, const std::string& suffix)
+{
+    m_items.emplace_back(new Item{type, suffix, m_presets_sizer, this});
+}
+
+std::string SavePresetDialog::get_name()
+{
+    return m_items.front()->preset_name();
+}
+
+std::string SavePresetDialog::get_name(Preset::Type type)
+{
+    for (const Item* item : m_items)
+        if (item->type() == type)
+            return item->preset_name();
+    return "";
+}
+
+bool SavePresetDialog::enable_ok_btn() const
+{
+    for (const Item* item : m_items)
+        if (!item->is_valid())
+            return false;
+
+    return true;
+}
+
+void SavePresetDialog::add_info_for_edit_ph_printer(wxBoxSizer* sizer)
+{
+    PhysicalPrinterCollection& printers = wxGetApp().preset_bundle->physical_printers;
+    m_ph_printer_name = printers.get_selected_printer_name();
+    m_old_preset_name = printers.get_selected_printer_preset_name();
+
+    wxString msg_text = from_u8((boost::format(_u8L("You have selected physical printer \"%1%\" \n"
+                                                    "with related printer preset \"%2%\"")) %
+                                                    m_ph_printer_name % m_old_preset_name).str());
+    m_label = new wxStaticText(this, wxID_ANY, msg_text);
+    m_label->SetFont(wxGetApp().bold_font());
+
+    wxString choices[] = {"","",""};
+
+    m_action_radio_box = new wxRadioBox(this, wxID_ANY, "", wxDefaultPosition, wxDefaultSize,
+                                        WXSIZEOF(choices), choices, 3, wxRA_SPECIFY_ROWS);
+    m_action_radio_box->SetSelection(0);
+    m_action_radio_box->Bind(wxEVT_RADIOBOX, [this](wxCommandEvent& e) {
+        m_action = (ActionType)e.GetSelection(); });
+    m_action = ChangePreset;
+
+    m_radio_sizer = new wxBoxSizer(wxHORIZONTAL);
+    m_radio_sizer->Add(m_action_radio_box, 1, wxEXPAND | wxTOP, 2*BORDER_W);
+
+    sizer->Add(m_label,         0, wxEXPAND | wxLEFT | wxTOP,   3*BORDER_W);
+    sizer->Add(m_radio_sizer,   1, wxEXPAND | wxLEFT,           3*BORDER_W);
+}
+
+void SavePresetDialog::update_info_for_edit_ph_printer(const std::string& preset_name)
+{
+    bool show = wxGetApp().preset_bundle->physical_printers.has_selection() && m_old_preset_name != preset_name;
+
+    m_label->Show(show);
+    m_radio_sizer->ShowItems(show);
+    if (!show) {
+        this->SetMinSize(wxSize(100,50));
+        return;
+    }
+
+    wxString msg_text = from_u8((boost::format(_u8L("What would you like to do with \"%1%\" preset after saving?")) % preset_name).str());
+    m_action_radio_box->SetLabel(msg_text);
+
+    wxString choices[] = { from_u8((boost::format(_u8L("Change \"%1%\" to \"%2%\" for this physical printer \"%3%\"")) % m_old_preset_name % preset_name % m_ph_printer_name).str()),
+                           from_u8((boost::format(_u8L("Add \"%1%\" as a next preset for the the physical printer \"%2%\"")) % preset_name % m_ph_printer_name).str()),
+                           from_u8((boost::format(_u8L("Just switch to \"%1%\" preset")) % preset_name).str()) };
+
+    int n = 0;
+    for(const wxString& label: choices)
+        m_action_radio_box->SetString(n++, label);
+}
+
+void SavePresetDialog::layout()
+{
+    this->Layout();
+    this->Fit();
+}
+
+void SavePresetDialog::on_dpi_changed(const wxRect& suggested_rect)
+{
+    const int& em = em_unit();
+
+    msw_buttons_rescale(this, em, { wxID_OK, wxID_CANCEL });
+
+    for (Item* item : m_items)
+        item->update_valid_bmp();
+
+    //const wxSize& size = wxSize(45 * em, 35 * em);
+    SetMinSize(/*size*/wxSize(100, 50));
+
+    Fit();
+    Refresh();
+}
+
+void SavePresetDialog::update_physical_printers(const std::string& preset_name)
+{
+    if (m_action == UndefAction)
+        return;
+
+    PhysicalPrinterCollection& physical_printers = wxGetApp().preset_bundle->physical_printers;
+    if (!physical_printers.has_selection())
+        return;
+
+    std::string printer_preset_name = physical_printers.get_selected_printer_preset_name();
+
+    if (m_action == Switch)
+        // unselect physical printer, if it was selected
+        physical_printers.unselect_printer();
+    else
+    {
+        PhysicalPrinter printer = physical_printers.get_selected_printer();
+
+        if (m_action == ChangePreset)
+            printer.delete_preset(printer_preset_name);
+
+        if (printer.add_preset(preset_name))
+            physical_printers.save_printer(printer);
+
+        physical_printers.select_printer(printer.get_full_name(preset_name));
+    }    
+}
+
+void SavePresetDialog::accept()
+{
+    for (Item* item : m_items) {
+        item->accept();
+        if (item->type() == Preset::TYPE_PRINTER)
+            update_physical_printers(item->preset_name());
+    }
+
+    EndModal(wxID_OK);
+}
+
+}}    // namespace Slic3r::GUI
diff --git a/src/slic3r/GUI/SavePresetDialog.hpp b/src/slic3r/GUI/SavePresetDialog.hpp
new file mode 100644
index 000000000..4768decc0
--- /dev/null
+++ b/src/slic3r/GUI/SavePresetDialog.hpp
@@ -0,0 +1,102 @@
+#ifndef slic3r_SavePresetDialog_hpp_
+#define slic3r_SavePresetDialog_hpp_
+
+//#include <wx/gdicmn.h>
+
+#include "libslic3r/Preset.hpp"
+#include "wxExtensions.hpp"
+#include "GUI_Utils.hpp"
+
+class wxString;
+class wxStaticText;
+class wxComboBox;
+class wxStaticBitmap;
+
+namespace Slic3r {
+
+namespace GUI {
+
+class SavePresetDialog : public DPIDialog
+{
+    enum ActionType
+    {
+        ChangePreset,
+        AddPreset,
+        Switch, 
+        UndefAction
+    };
+
+    struct Item
+    {
+        enum ValidationType
+        {
+            Valid,
+            NoValid,
+            Warning
+        };
+
+        Item(Preset::Type type, const std::string& suffix, wxBoxSizer* sizer, SavePresetDialog* parent);
+
+        void            update_valid_bmp();
+        void            accept();
+
+        bool            is_valid()      const { return m_valid_type != NoValid; }
+        Preset::Type    type()          const { return m_type; }
+        std::string     preset_name()   const { return m_preset_name; }
+
+    private:
+        Preset::Type    m_type;
+        ValidationType  m_valid_type;
+        std::string		m_preset_name;
+
+        SavePresetDialog*   m_parent        {nullptr};
+        wxStaticBitmap*     m_valid_bmp     {nullptr};
+        wxComboBox*         m_combo         {nullptr};
+        wxStaticText*       m_valid_label   {nullptr};
+
+        PresetCollection*   m_presets       {nullptr};
+
+        void update();
+    };
+
+    std::vector<Item*>   m_items;
+
+    wxBoxSizer*         m_presets_sizer     {nullptr};
+    wxStaticText*       m_label             {nullptr};
+    wxRadioBox*         m_action_radio_box  {nullptr};
+    wxBoxSizer*         m_radio_sizer       {nullptr};  
+    ActionType          m_action            {UndefAction};
+
+    std::string         m_ph_printer_name;
+    std::string         m_old_preset_name;
+
+public:
+
+    SavePresetDialog(Preset::Type type, std::string suffix = "");
+    SavePresetDialog(std::vector<Preset::Type> types, std::string suffix = "");
+    ~SavePresetDialog();
+
+    void AddItem(Preset::Type type, const std::string& suffix);
+
+    std::string get_name();
+    std::string get_name(Preset::Type type);
+
+    bool enable_ok_btn() const;
+    void add_info_for_edit_ph_printer(wxBoxSizer *sizer);
+    void update_info_for_edit_ph_printer(const std::string &preset_name);
+    void layout();
+
+protected:
+    void on_dpi_changed(const wxRect& suggested_rect) override;
+    void on_sys_color_changed() override {}
+
+private:
+    void build(std::vector<Preset::Type> types, std::string suffix = "");
+    void update_physical_printers(const std::string& preset_name);
+    void accept();
+};
+
+} // namespace GUI
+} // namespace Slic3r
+
+#endif
diff --git a/src/slic3r/GUI/Tab.cpp b/src/slic3r/GUI/Tab.cpp
index 539d79852..70e739d93 100644
--- a/src/slic3r/GUI/Tab.cpp
+++ b/src/slic3r/GUI/Tab.cpp
@@ -37,6 +37,7 @@
 #include "format.hpp"
 #include "PhysicalPrinterDialog.hpp"
 #include "UnsavedChangesDialog.hpp"
+#include "SavePresetDialog.hpp"
 
 #ifdef WIN32
 	#include <commctrl.h>
diff --git a/src/slic3r/GUI/UnsavedChangesDialog.cpp b/src/slic3r/GUI/UnsavedChangesDialog.cpp
index bf1a1cfa7..02c61b416 100644
--- a/src/slic3r/GUI/UnsavedChangesDialog.cpp
+++ b/src/slic3r/GUI/UnsavedChangesDialog.cpp
@@ -14,7 +14,7 @@
 #include "Tab.hpp"
 #include "ExtraRenderers.hpp"
 #include "wxExtensions.hpp"
-#include "PresetComboBoxes.hpp"
+#include "SavePresetDialog.hpp"
 #include "MainFrame.hpp"
 
 //#define FTS_FUZZY_MATCH_IMPLEMENTATION