3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Parallelized PrintObject::bridge_over_infill()

Browse Source
This commit is contained in:
Vojtech Bubnik 2022-08-22 15:41:36 +02:00
parent 7949ea9544
commit 14e0cd0e96
3 changed files with 56 additions and 46 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

96
src/libslic3r/PrintObject.cpp
View File

@ -1441,56 +1441,64 @@ void PrintObject::discover_vertical_shells()
// PROFILE_OUTPUT(debug_out_path("discover_vertical_shells-profile.txt").c_str());
}
/* This method applies bridge flow to the first internal solid layer above
sparse infill */
// This method applies bridge flow to the first internal solid layer above sparse infill.
void PrintObject::bridge_over_infill()
{
BOOST_LOG_TRIVIAL(info) << "Bridge over infill..." << log_memory_info();
for (size_t region_id = 0; region_id < this->num_printing_regions(); ++ region_id) {
const PrintRegion &region = this->printing_region(region_id);
// skip bridging in case there are no voids
if (region.config().fill_density.value == 100)
continue;
std::vector<int> sparse_infill_regions;
for (size_t region_id = 0; region_id < this->num_printing_regions(); ++ region_id)
if (const PrintRegion &region = this->printing_region(region_id); region.config().fill_density.value < 100)
sparse_infill_regions.emplace_back(region_id);
if (this->layer_count() < 2 || sparse_infill_regions.empty())
return;
for (LayerPtrs::iterator layer_it = m_layers.begin(); layer_it != m_layers.end(); ++ layer_it) {
// skip first layer
if (layer_it == m_layers.begin())
continue;
Layer *layer = *layer_it;
// Collect sum of all internal (sparse infill) regions, because
// 1) layerm->fill_surfaces.will be modified in parallel.
// 2) the parallel loop works on a sum of surfaces over regions anyways, thus collecting the sparse infill surfaces
// up front is an optimization.
std::vector<Polygons> internals;
internals.reserve(this->layer_count());
for (Layer *layer : m_layers) {
Polygons sum;
for (const LayerRegion *layerm : layer->m_regions)
layerm->fill_surfaces.filter_by_type(stInternal, &sum);
internals.emplace_back(std::move(sum));
}
// Process all regions and layers in parallel.
tbb::parallel_for(tbb::blocked_range<size_t>(0, sparse_infill_regions.size() * (this->layer_count() - 1), sparse_infill_regions.size()),
[this, &sparse_infill_regions, &internals]
(const tbb::blocked_range<size_t> &range) {
for (size_t task_id = range.begin(); task_id != range.end(); ++ task_id) {
const size_t layer_id = (task_id / sparse_infill_regions.size()) + 1;
const size_t region_id = sparse_infill_regions[task_id % sparse_infill_regions.size()];
Layer *layer = this->get_layer(layer_id);
LayerRegion *layerm = layer->m_regions[region_id];
Flow bridge_flow = layerm->bridging_flow(frSolidInfill);
// extract the stInternalSolid surfaces that might be transformed into bridges
Polygons internal_solid;
layerm->fill_surfaces.filter_by_type(stInternalSolid, &internal_solid);
// Extract the stInternalSolid surfaces that might be transformed into bridges.
ExPolygons internal_solid;
layerm->fill_surfaces.remove_type(stInternalSolid, &internal_solid);
if (internal_solid.empty())
// No internal solid -> no new bridges for this layer region.
continue;
// check whether the lower area is deep enough for absorbing the extra flow
// (for obvious physical reasons but also for preventing the bridge extrudates
// from overflowing in 3D preview)
ExPolygons to_bridge;
{
Polygons to_bridge_pp = internal_solid;
// iterate through lower layers spanned by bridge_flow
Polygons to_bridge_pp = to_polygons(internal_solid);
// Iterate through lower layers spanned by bridge_flow.
double bottom_z = layer->print_z - bridge_flow.height() - EPSILON;
for (int i = int(layer_it - m_layers.begin()) - 1; i >= 0; --i) {
const Layer* lower_layer = m_layers[i];
// stop iterating if layer is lower than bottom_z
if (lower_layer->print_z < bottom_z) break;
// iterate through regions and collect internal surfaces
Polygons lower_internal;
for (LayerRegion *lower_layerm : lower_layer->m_regions)
lower_layerm->fill_surfaces.filter_by_type(stInternal, &lower_internal);
// intersect such lower internal surfaces with the candidate solid surfaces
to_bridge_pp = intersection(to_bridge_pp, lower_internal);
for (auto i = int(layer_id) - 1; i >= 0; -- i) {
// Stop iterating if layer is lower than bottom_z.
if (m_layers[i]->print_z < bottom_z)
break;
// Intersect lower sparse infills with the candidate solid surfaces.
to_bridge_pp = intersection(to_bridge_pp, internals[i]);
}
// there's no point in bridging too thin/short regions
//FIXME Vojtech: The offset2 function is not a geometric offset,
// therefore it may create 1) gaps, and 2) sharp corners, which are outside the original contour.
@ -1500,12 +1508,16 @@ void PrintObject::bridge_over_infill()
to_bridge_pp = opening(to_bridge_pp, min_width);
}
if (to_bridge_pp.empty()) continue;
if (to_bridge_pp.empty()) {
// Restore internal_solid surfaces.
for (ExPolygon &ex : internal_solid)
layerm->fill_surfaces.surfaces.push_back(Surface(stInternalSolid, std::move(ex)));
continue;
}
// convert into ExPolygons
to_bridge = union_ex(to_bridge_pp);
}
#ifdef SLIC3R_DEBUG
printf("Bridging %zu internal areas at layer %zu\n", to_bridge.size(), layer->id());
#endif
@ -1514,11 +1526,10 @@ void PrintObject::bridge_over_infill()
ExPolygons not_to_bridge = diff_ex(internal_solid, to_bridge, ApplySafetyOffset::Yes);
to_bridge = intersection_ex(to_bridge, internal_solid, ApplySafetyOffset::Yes);
// build the new collection of fill_surfaces
layerm->fill_surfaces.remove_type(stInternalSolid);
for (ExPolygon &ex : to_bridge)
layerm->fill_surfaces.surfaces.push_back(Surface(stInternalBridge, ex));
layerm->fill_surfaces.surfaces.push_back(Surface(stInternalBridge, std::move(ex)));
for (ExPolygon &ex : not_to_bridge)
layerm->fill_surfaces.surfaces.push_back(Surface(stInternalSolid, ex));
layerm->fill_surfaces.surfaces.push_back(Surface(stInternalSolid, std::move(ex)));
/*
# exclude infill from the layers below if needed
# see discussion at https://github.com/alexrj/Slic3r/issues/240
@ -1552,14 +1563,13 @@ void PrintObject::bridge_over_infill()
}
}
*/
#ifdef SLIC3R_DEBUG_SLICE_PROCESSING
layerm->export_region_slices_to_svg_debug("7_bridge_over_infill");
layerm->export_region_fill_surfaces_to_svg_debug("7_bridge_over_infill");
#endif /* SLIC3R_DEBUG_SLICE_PROCESSING */
m_print->throw_if_canceled();
}
}
});
}
static void clamp_exturder_to_default(ConfigOptionInt &opt, size_t num_extruders)

4
src/libslic3r/SurfaceCollection.cpp
View File

@ -121,12 +121,12 @@ void SurfaceCollection::remove_type(const SurfaceType type)
surfaces.erase(surfaces.begin() + j, surfaces.end());
}
void SurfaceCollection::remove_type(const SurfaceType type, Polygons *polygons)
void SurfaceCollection::remove_type(const SurfaceType type, ExPolygons *polygons)
{
size_t j = 0;
for (size_t i = 0; i < surfaces.size(); ++ i) {
if (Surface &surface = surfaces[i]; surface.surface_type == type) {
polygons_append(*polygons, to_polygons(std::move(surface.expolygon)));
polygons->emplace_back(std::move(surface.expolygon));
} else {
if (j < i)
std::swap(surfaces[i], surfaces[j]);

2
src/libslic3r/SurfaceCollection.hpp
View File

@ -33,7 +33,7 @@ public:
void remove_type(const SurfaceType type);
void remove_types(const SurfaceType *types, int ntypes);
void filter_by_type(SurfaceType type, Polygons *polygons) const;
void remove_type(const SurfaceType type, Polygons *polygons);
void remove_type(const SurfaceType type, ExPolygons *polygons);
void set_type(SurfaceType type) {
for (Surface &surface : this->surfaces)
surface.surface_type = type;