Sync with PrusaSlicer-settings.

resources/profiles/PrusaResearch.idx

@@ -1,4 +1,5 @@
 min_slic3r_version = 2.4.0-rc
+1.4.2 Added SLA material profiles.
 1.4.1 Updated firmware version.
 1.4.0 Updated for the PrusaSlicer 2.4.0-rc release. Updated SLA material colors.
 min_slic3r_version = 2.4.0-beta2

resources/profiles/PrusaResearch.ini

@@ -5,7 +5,7 @@
 name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.4.1
+config_version = 1.4.2
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
 changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@@ -4875,6 +4875,30 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #F9DB4C
 
+[sla_material:Prusament Resin Tough Transparent Green @0.025]
+inherits = *common 0.025*
+exposure_time = 5
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #1DAf5E
+
+[sla_material:Prusament Resin Tough Transparent Red @0.025]
+inherits = *common 0.025*
+exposure_time = 6
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #D21B31
+
+[sla_material:Prusament Resin Tough Transparent Amber @0.025]
+inherits = *common 0.025*
+exposure_time = 5
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #FCB30E
+
 ## Prusa 0.025
   
 [sla_material:Prusa Orange Tough @0.025]
@@ -5052,6 +5076,14 @@ material_type = Casting
 material_vendor = Made for Prusa
 material_colour = #FFFF6F
 
+[sla_material:Ameralabs TGM-7 LED @0.025]
+inherits = *common 0.025*
+exposure_time = 4
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Ameralabs
+material_colour = #C0C0C0
+
 [sla_material:Siraya Tech Simple Clear @0.025]
 inherits = *common 0.025*
 exposure_time = 8
@@ -5190,6 +5222,14 @@ material_type = Tough
 material_vendor = Asiga
 material_colour = #C0C0C0
 
+[sla_material:Ameralabs TGM-7 LED @0.05]
+inherits = *common 0.05*
+exposure_time = 7
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Ameralabs
+material_colour = #C0C0C0
+
 [sla_material:Ameralabs AMD 3 LED @0.05]
 inherits = *common 0.05*
 exposure_time = 5
@@ -5728,6 +5768,30 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #F9DB4C
 
+[sla_material:Prusament Resin Tough Transparent Green @0.05]
+inherits = *common 0.05*
+exposure_time = 6
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #1DAf5E
+
+[sla_material:Prusament Resin Tough Transparent Red @0.05]
+inherits = *common 0.05*
+exposure_time = 8
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #D21B31
+
+[sla_material:Prusament Resin Tough Transparent Amber @0.05]
+inherits = *common 0.05*
+exposure_time = 6
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #FCB30E
+
 ## Prusa 0.05
 
 [sla_material:Prusa Beige Tough @0.05]
@@ -6018,6 +6082,14 @@ material_type = Tough
 material_vendor = BlueCast
 material_colour = #FFEEE6
 
+[sla_material:Ameralabs TGM-7 LED @0.1]
+inherits = *common 0.1*
+exposure_time = 10
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = Ameralabs
+material_colour = #C0C0C0
+
 ## Prusa Polymers 0.1
 
 [sla_material:Prusament Resin Tough Prusa Orange @0.1]
@@ -6084,6 +6156,30 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #F9DB4C
 
+[sla_material:Prusament Resin Tough Transparent Green @0.1]
+inherits = *common 0.1*
+exposure_time = 13
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #1DAf5E
+
+[sla_material:Prusament Resin Tough Transparent Red @0.1]
+inherits = *common 0.1*
+exposure_time = 13
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #D21B31
+
+[sla_material:Prusament Resin Tough Transparent Amber @0.1]
+inherits = *common 0.1*
+exposure_time = 13
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #FCB30E
+
 ## Prusa 0.1
 
 [sla_material:Prusa Orange Tough @0.1]
@@ -6244,6 +6340,30 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #F9DB4C
 
+[sla_material:Prusament Resin Tough Transparent Green @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #1DAf5E
+
+[sla_material:Prusament Resin Tough Transparent Red @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #D21B31
+
+[sla_material:Prusament Resin Tough Transparent Amber @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #FCB30E
+
 ## Made for Prusa 0.025
 
 [sla_material:Prusa Orange Tough @0.025 SL1S]
@@ -6366,6 +6486,15 @@ material_type = Casting
 material_vendor = Made for Prusa
 material_colour = #00B900
 
+[sla_material:Ameralabs TGM-7 LED @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Ameralabs
+material_colour = #C0C0C0
+material_print_speed = slow
+
 [sla_material:PrimaCreator Tough Light Grey @0.025 SL1S]
 inherits = *0.025_sl1s*
 exposure_time = 1.8
@@ -6413,6 +6542,7 @@ initial_exposure_time = 15
 material_type = Dental
 material_vendor = DruckWege
 material_colour = #FFEEE6
+material_print_speed = slow
 
 [sla_material:DruckWege Type D Standard White @0.025 SL1S]
 inherits = *0.025_sl1s*
@@ -6421,6 +6551,7 @@ initial_exposure_time = 15
 material_type = Tough
 material_vendor = DruckWege
 material_colour = #FFFFFF
+material_print_speed = slow
 
 [sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.025 SL1S]
 inherits = *0.025_sl1s*
@@ -6429,6 +6560,7 @@ initial_exposure_time = 15
 material_type = Tough
 material_vendor = DruckWege
 material_colour = #F8F8F8
+material_print_speed = slow
 
 [sla_material:3DM-ABS Orange @0.025 SL1S]
 inherits = *0.025_sl1s*
@@ -6530,6 +6662,30 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #F9DB4C
 
+[sla_material:Prusament Resin Tough Transparent Green @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #1DAf5E
+
+[sla_material:Prusament Resin Tough Transparent Red @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #D21B31
+
+[sla_material:Prusament Resin Tough Transparent Amber @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #FCB30E
+
 ## Made for Prusa 0.05
 
 [sla_material:Prusa Orange Tough @0.05 SL1S]
@@ -6652,6 +6808,15 @@ material_type = Casting
 material_vendor = Made for Prusa
 material_colour = #00B900
 
+[sla_material:Ameralabs TGM-7 LED @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Ameralabs
+material_colour = #C0C0C0
+material_print_speed = slow
+
 [sla_material:PrimaCreator Tough Light Grey @0.05 SL1S]
 inherits = *0.05_sl1s*
 exposure_time = 2.4
@@ -6699,6 +6864,7 @@ initial_exposure_time = 15
 material_type = Dental
 material_vendor = DruckWege
 material_colour = #FFEEE6
+material_print_speed = slow
 
 [sla_material:DruckWege Type D Standard White @0.05 SL1S]
 inherits = *0.05_sl1s*
@@ -6707,6 +6873,7 @@ initial_exposure_time = 15
 material_type = Tough
 material_vendor = DruckWege
 material_colour = #FFFFFF
+material_print_speed = slow
 
 [sla_material:DruckWege Type D Standard Pigmentfrei Clear @0.05 SL1S]
 inherits = *0.05_sl1s*
@@ -6715,6 +6882,7 @@ initial_exposure_time = 15
 material_type = Tough
 material_vendor = DruckWege
 material_colour = #F8F8F8
+material_print_speed = slow
 
 [sla_material:3DM-ABS Orange @0.05 SL1S]
 inherits = *0.05_sl1s*
@@ -6816,6 +6984,30 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #F9DB4C
 
+[sla_material:Prusament Resin Tough Transparent Green @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #1DAf5E
+
+[sla_material:Prusament Resin Tough Transparent Red @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #D21B31
+
+[sla_material:Prusament Resin Tough Transparent Amber @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #FCB30E
+
 ## Made for Prusa 0.1
 
 [sla_material:Prusa Orange Tough @0.1 SL1S]
@@ -6938,6 +7130,15 @@ material_type = Casting
 material_vendor = Made for Prusa
 material_colour = #00B900
 
+[sla_material:Ameralabs TGM-7 LED @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Ameralabs
+material_colour = #C0C0C0
+material_print_speed = slow
+
 [sla_material:PrimaCreator Tough Light Grey @0.1 SL1S]
 inherits = *0.1_sl1s*
 exposure_time = 3
@@ -6985,6 +7186,7 @@ initial_exposure_time = 15
 material_type = Dental
 material_vendor = DruckWege
 material_colour = #FFEEE6
+material_print_speed = slow
 
 [sla_material:3DM-ABS Orange @0.1 SL1S]
 inherits = *0.1_sl1s*
@@ -7695,7 +7897,7 @@ retract_lift_below = 179
 retract_layer_change = 1
 silent_mode = 0
 remaining_times = 1
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow
 end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
 extruder_colour = 
@@ -7712,7 +7914,7 @@ default_print_profile = 0.10mm DETAIL @0.25 nozzle MINI
 retract_length = 3
 retract_lift = 0.15
 retract_before_travel = 1
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F600\nG1 X40 E10 F400\nG92 E0\n\nM221 S95 ; set flow
+start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F600\nG1 X40 E10 F400\nG92 E0\n\nM221 S95 ; set flow
 
 [printer:Original Prusa MINI & MINI+ 0.6 nozzle]
 inherits = Original Prusa MINI & MINI+