diff --git a/resources/localization/PrusaSlicer.pot b/resources/localization/PrusaSlicer.pot
new file mode 100644
index 000000000..e453150b8
--- /dev/null
+++ b/resources/localization/PrusaSlicer.pot
@@ -0,0 +1,7657 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
+msgid ""
+msgstr ""
+"Project-Id-Version: PACKAGE VERSION\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2019-05-13 15:02+0200\n"
+"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: src/slic3r/GUI/AboutDialog.cpp:35
+#, possible-c-format
+msgid "About %s"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:67 src/slic3r/GUI/MainFrame.cpp:59
+msgid "Version"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:92
+msgid "Copyright"
+msgstr ""
+
+#. TRN "Slic3r _is licensed under the_ License"
+#: src/slic3r/GUI/AboutDialog.cpp:94
+msgid "is licensed under the"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:95
+msgid "GNU Affero General Public License, version 3"
+msgstr ""
+
+#: src/slic3r/GUI/AboutDialog.cpp:96
+msgid ""
+"Contributions by Henrik Brix Andersen, Nicolas Dandrimont, Mark Hindess, "
+"Petr Ledvina, Joseph Lenox, Y. Sapir, Mike Sheldrake, Vojtech Bubnik and "
+"numerous others."
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:84
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:400
+msgid "Copying of the temporary G-code to the output G-code failed"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:85
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:398
+msgid "Running post-processing scripts"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:87
+msgid "G-code file exported to %1%"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:91
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:109
+msgid "Slicing complete"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:105
+msgid "Masked SLA file exported to %1%"
+msgstr ""
+
+#: src/slic3r/GUI/BackgroundSlicingProcess.cpp:409
+msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:60
+msgid "Shape"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:68
+msgid "Rectangular"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:72
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:232 src/slic3r/GUI/Plater.cpp:137
+#: src/slic3r/GUI/Tab.cpp:2263
+msgid "Size"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:73
+msgid "Size in X and Y of the rectangular plate."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:79
+msgid "Origin"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:80
+msgid ""
+"Distance of the 0,0 G-code coordinate from the front left corner of the "
+"rectangle."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:84
+msgid "Circular"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:87 src/slic3r/GUI/ConfigWizard.cpp:118
+#: src/slic3r/GUI/ConfigWizard.cpp:565 src/slic3r/GUI/ConfigWizard.cpp:579
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:229
+#: src/slic3r/GUI/WipeTowerDialog.cpp:84 src/libslic3r/PrintConfig.cpp:60
+#: src/libslic3r/PrintConfig.cpp:67 src/libslic3r/PrintConfig.cpp:76
+#: src/libslic3r/PrintConfig.cpp:211 src/libslic3r/PrintConfig.cpp:286
+#: src/libslic3r/PrintConfig.cpp:294 src/libslic3r/PrintConfig.cpp:344
+#: src/libslic3r/PrintConfig.cpp:354 src/libslic3r/PrintConfig.cpp:474
+#: src/libslic3r/PrintConfig.cpp:485 src/libslic3r/PrintConfig.cpp:503
+#: src/libslic3r/PrintConfig.cpp:681 src/libslic3r/PrintConfig.cpp:1191
+#: src/libslic3r/PrintConfig.cpp:1252 src/libslic3r/PrintConfig.cpp:1270
+#: src/libslic3r/PrintConfig.cpp:1288 src/libslic3r/PrintConfig.cpp:1340
+#: src/libslic3r/PrintConfig.cpp:1350 src/libslic3r/PrintConfig.cpp:1471
+#: src/libslic3r/PrintConfig.cpp:1479 src/libslic3r/PrintConfig.cpp:1520
+#: src/libslic3r/PrintConfig.cpp:1528 src/libslic3r/PrintConfig.cpp:1538
+#: src/libslic3r/PrintConfig.cpp:1546 src/libslic3r/PrintConfig.cpp:1554
+#: src/libslic3r/PrintConfig.cpp:1637 src/libslic3r/PrintConfig.cpp:1853
+#: src/libslic3r/PrintConfig.cpp:1923 src/libslic3r/PrintConfig.cpp:1957
+#: src/libslic3r/PrintConfig.cpp:2150 src/libslic3r/PrintConfig.cpp:2157
+#: src/libslic3r/PrintConfig.cpp:2164 src/libslic3r/PrintConfig.cpp:2194
+#: src/libslic3r/PrintConfig.cpp:2204 src/libslic3r/PrintConfig.cpp:2214
+#: src/libslic3r/PrintConfig.cpp:2322 src/libslic3r/PrintConfig.cpp:2397
+#: src/libslic3r/PrintConfig.cpp:2406 src/libslic3r/PrintConfig.cpp:2415
+#: src/libslic3r/PrintConfig.cpp:2425 src/libslic3r/PrintConfig.cpp:2469
+#: src/libslic3r/PrintConfig.cpp:2479 src/libslic3r/PrintConfig.cpp:2498
+#: src/libslic3r/PrintConfig.cpp:2508 src/libslic3r/PrintConfig.cpp:2517
+#: src/libslic3r/PrintConfig.cpp:2535 src/libslic3r/PrintConfig.cpp:2550
+#: src/libslic3r/PrintConfig.cpp:2564 src/libslic3r/PrintConfig.cpp:2577
+#: src/libslic3r/PrintConfig.cpp:2587
+msgid "mm"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:88 src/libslic3r/PrintConfig.cpp:678
+msgid "Diameter"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:89
+msgid ""
+"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
+"center."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:93 src/slic3r/GUI/GUI_Preview.cpp:239
+#: src/libslic3r/GCode/PreviewData.cpp:175
+msgid "Custom"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:97
+msgid "Load shape from STL..."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:143
+msgid "Settings"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:316
+msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/GUI_ObjectList.cpp:1438
+msgid "Error!"
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:342
+msgid "The selected file contains no geometry."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.cpp:346
+msgid ""
+"The selected file contains several disjoint areas. This is not supported."
+msgstr ""
+
+#: src/slic3r/GUI/BedShapeDialog.hpp:45 src/slic3r/GUI/ConfigWizard.cpp:530
+msgid "Bed Shape"
+msgstr ""
+
+#: src/slic3r/GUI/BonjourDialog.cpp:55
+msgid "Network lookup"
+msgstr ""
+
+#: src/slic3r/GUI/BonjourDialog.cpp:72
+msgid "Address"
+msgstr ""
+
+#: src/slic3r/GUI/BonjourDialog.cpp:73
+msgid "Hostname"
+msgstr ""
+
+#: src/slic3r/GUI/BonjourDialog.cpp:74
+msgid "Service name"
+msgstr ""
+
+#: src/slic3r/GUI/BonjourDialog.cpp:76
+msgid "OctoPrint version"
+msgstr ""
+
+#: src/slic3r/GUI/BonjourDialog.cpp:218
+msgid "Searching for devices"
+msgstr ""
+
+#: src/slic3r/GUI/BonjourDialog.cpp:225
+msgid "Finished"
+msgstr ""
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:16
+msgid "Buttons And Text Colors Description"
+msgstr ""
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:36
+msgid "Value is the same as the system value"
+msgstr ""
+
+#: src/slic3r/GUI/ButtonsDescription.cpp:53
+msgid ""
+"Value was changed and is not equal to the system value or the last saved "
+"preset"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:18
+msgid "Upgrade"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:20
+msgid "Downgrade"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:22
+msgid "Before roll back"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:24
+msgid "User"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:27
+msgid "Unknown"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:39
+msgid "Active"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:45
+msgid "slic3r version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:46 src/slic3r/GUI/Preset.cpp:1274
+msgid "print"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:47
+msgid "filaments"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:48 src/slic3r/GUI/Preset.cpp:1278
+msgid "printer"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52 src/slic3r/GUI/Tab.cpp:932
+msgid "vendor"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:52
+msgid "version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:53
+msgid "min slic3r version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55
+msgid "max slic3r version"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
+msgid "model"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:58
+msgid "variants"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:70
+#, possible-c-format
+msgid "Incompatible with this %s"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:73
+msgid "Activate"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:99
+msgid "Configuration Snapshots"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:118
+msgid "nozzle"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:122
+msgid "Alternate nozzles:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:188
+msgid "All standard"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:189 src/slic3r/GUI/Tab.cpp:3007
+msgid "All"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:190 src/slic3r/GUI/Plater.cpp:433
+#: src/libslic3r/GCode/PreviewData.cpp:162
+msgid "None"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:296
+#, possible-c-format
+msgid "Welcome to the %s Configuration Assistant"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:298
+#, possible-c-format
+msgid "Welcome to the %s Configuration Wizard"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:300
+msgid "Welcome"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:304 src/slic3r/GUI/GUI_App.cpp:707
+#, possible-c-format
+msgid "Run %s"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:306
+#, possible-c-format
+msgid ""
+"Hello, welcome to %s! This %s helps you with the initial configuration; just "
+"a few settings and you will be ready to print."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:311
+msgid ""
+"Remove user profiles - install from scratch (a snapshot will be taken "
+"beforehand)"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:342
+#, possible-c-format
+msgid "%s Family"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:379
+msgid "Custom Printer Setup"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:379
+msgid "Custom Printer"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:381
+msgid "Define a custom printer profile"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:383
+msgid "Custom profile name:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:407
+msgid "Automatic updates"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:407
+msgid "Updates"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:415 src/slic3r/GUI/Preferences.cpp:61
+msgid "Check for application updates"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:419
+#, possible-c-format
+msgid ""
+"If enabled, %s checks for new application versions online. When a new "
+"version becomes available, a notification is displayed at the next "
+"application startup (never during program usage). This is only a "
+"notification mechanisms, no automatic installation is done."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:425 src/slic3r/GUI/Preferences.cpp:69
+msgid "Update built-in Presets automatically"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:429
+#, possible-c-format
+msgid ""
+"If enabled, %s downloads updates of built-in system presets in the "
+"background.These updates are downloaded into a separate temporary location."
+"When a new preset version becomes available it is offered at application "
+"startup."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:432
+msgid ""
+"Updates are never applied without user's consent and never overwrite user's "
+"customized settings."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:437
+msgid ""
+"Additionally a backup snapshot of the whole configuration is created before "
+"an update is applied."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:444
+msgid "Other Vendors"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:446
+#, possible-c-format
+msgid "Pick another vendor supported by %s:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:492
+msgid "Firmware Type"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:492 src/slic3r/GUI/Tab.cpp:1926
+msgid "Firmware"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:496
+msgid "Choose the type of firmware used by your printer."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:530
+msgid "Bed Shape and Size"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:533
+msgid "Set the shape of your printer's bed."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:547
+msgid "Filament and Nozzle Diameters"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:547
+msgid "Print Diameters"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:561
+msgid "Enter the diameter of your printer's hot end nozzle."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:564
+msgid "Nozzle Diameter:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:574
+msgid "Enter the diameter of your filament."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:575
+msgid ""
+"Good precision is required, so use a caliper and do multiple measurements "
+"along the filament, then compute the average."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:578
+msgid "Filament Diameter:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:596
+msgid "Extruder and Bed Temperatures"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:596
+msgid "Temperatures"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:612
+msgid "Enter the temperature needed for extruding your filament."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:613
+msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:616
+msgid "Extrusion Temperature:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:617 src/slic3r/GUI/ConfigWizard.cpp:631
+msgid "°C"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:626
+msgid ""
+"Enter the bed temperature needed for getting your filament to stick to your "
+"heated bed."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:627
+msgid ""
+"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
+"no heated bed."
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:630
+msgid "Bed Temperature:"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1093
+msgid "Select all standard printers"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1096
+msgid "< &Back"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1097
+msgid "&Next >"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1098
+msgid "&Finish"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1099 src/slic3r/GUI/FirmwareDialog.cpp:147
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:37
+#: src/slic3r/GUI/ProgressStatusBar.cpp:28
+msgid "Cancel"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1113
+msgid "Prusa FFF Technology Printers"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1116
+msgid "Prusa MSLA Technology Printers"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1185
+msgid "Configuration Assistant"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1186
+msgid "Configuration &Assistant"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1188
+msgid "Configuration Wizard"
+msgstr ""
+
+#: src/slic3r/GUI/ConfigWizard.cpp:1189
+msgid "Configuration &Wizard"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:117
+msgid "default value"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:120
+msgid "parameter name"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:148
+#, possible-c-format
+msgid "%s doesn't support percentage"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:162 src/slic3r/GUI/Field.cpp:185
+msgid "Invalid numeric input."
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:167
+msgid "Input value is out of range"
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:193
+#, possible-c-format
+msgid ""
+"Do you mean %d%% instead of %d %s?\n"
+"Select YES if you want to change this value to %d%%, \n"
+"or NO if you are sure that %d %s is a correct value."
+msgstr ""
+
+#: src/slic3r/GUI/Field.cpp:196
+msgid "Parameter validation"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:146
+msgid "Flash!"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:148
+msgid "Flashing in progress. Please do not disconnect the printer!"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:192
+msgid "Flashing failed"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:273
+msgid "Flashing succeeded!"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:274
+msgid "Flashing failed. Please see the avrdude log below."
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:275
+msgid "Flashing cancelled."
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:313
+#, possible-c-format
+msgid ""
+"This firmware hex file does not match the printer model.\n"
+"The hex file is intended for: %s\n"
+"Printer reported: %s\n"
+"\n"
+"Do you want to continue and flash this hex file anyway?\n"
+"Please only continue if you are sure this is the right thing to do."
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:400 src/slic3r/GUI/FirmwareDialog.cpp:436
+#, possible-c-format
+msgid ""
+"Multiple %s devices found. Please only connect one at a time for flashing."
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:417
+#, possible-c-format
+msgid ""
+"The %s device was not found.\n"
+"If the device is connected, please press the Reset button next to the USB "
+"connector ..."
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:530
+#, possible-c-format
+msgid "The %s device could not have been found"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:608
+#, possible-c-format
+msgid "Error accessing port at %s: %s"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:610
+#, possible-c-format
+msgid "Error: %s"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:740
+msgid "Firmware flasher"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:765
+msgid "Firmware image:"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:768 src/slic3r/GUI/Tab.cpp:1687
+#: src/slic3r/GUI/Tab.cpp:1743
+msgid "Browse"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:770
+msgid "Serial port:"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:772
+msgid "Autodetected"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:773
+msgid "Rescan"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:780
+msgid "Progress:"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:783
+msgid "Status:"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:784
+msgid "Ready"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:804
+msgid "Advanced: Output log"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:815
+#: src/slic3r/GUI/PrintHostDialogs.cpp:160
+msgid "Close"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:863
+msgid ""
+"Are you sure you want to cancel firmware flashing?\n"
+"This could leave your printer in an unusable state!"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:864
+msgid "Confirmation"
+msgstr ""
+
+#: src/slic3r/GUI/FirmwareDialog.cpp:867
+msgid "Cancelling..."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:720
+msgid "An object outside the print area was detected"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:721
+msgid "A toolpath outside the print area was detected"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:722
+msgid "SLA supports outside the print area were detected"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:723
+msgid "Some objects are not visible when editing supports"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:725
+msgid ""
+"An object outside the print area was detected\n"
+"Resolve the current problem to continue slicing"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1694
+msgid "Last frame"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:1698
+msgid "ms"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3434
+msgid "Add..."
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3444 src/slic3r/GUI/GUI_ObjectList.cpp:1267
+#: src/slic3r/GUI/Plater.cpp:2933 src/slic3r/GUI/Plater.cpp:2951
+#: src/slic3r/GUI/Tab.cpp:2957
+msgid "Delete"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3455 src/slic3r/GUI/Plater.cpp:3341
+msgid "Delete all"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3466 src/slic3r/GUI/KBShortcutsDialog.cpp:135
+msgid "Arrange"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3480
+msgid "Copy"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3491
+msgid "Paste"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3505
+msgid "Add instance"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3517
+msgid "Remove instance"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3532
+msgid "Split to objects"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3544 src/slic3r/GUI/GUI_ObjectList.cpp:1122
+msgid "Split to parts"
+msgstr ""
+
+#: src/slic3r/GUI/GLCanvas3D.cpp:3559
+msgid "Layers editing"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:35
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:195
+msgid "Rotate lower part upwards"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:36
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:198
+msgid "Perform cut"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:43
+msgid "Cut object:"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:88
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:188 src/libslic3r/PrintConfig.cpp:3039
+msgid "Cut"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:193
+msgid "Keep upper part"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:194
+msgid "Keep lower part"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:32
+msgid "Place on face"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:51
+msgid "Move"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
+msgid "Position (mm)"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:177
+msgid "Displacement (mm)"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:458
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:324
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:342
+#: src/libslic3r/PrintConfig.cpp:3088
+msgid "Rotate"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:491
+msgid "Rotation (deg)"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:51
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:231
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:325
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:343
+#: src/libslic3r/PrintConfig.cpp:3103
+msgid "Scale"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:276
+msgid "Scale (%)"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:840
+msgid "Head diameter"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:853
+msgid "Lock supports under new islands"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:857
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1239
+msgid "Remove selected points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:861
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:914
+msgid "Remove all points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:866
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1242
+msgid "Apply changes"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:871
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1243
+msgid "Discard changes"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:879
+msgid "Minimal points distance"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:890
+#: src/libslic3r/PrintConfig.cpp:2524
+msgid "Support points density"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:904
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1245
+msgid "Auto-generate points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:910
+msgid "Manual editing"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:928
+msgid "Clipping of view"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:930
+msgid "Reset direction"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:997
+msgid "SLA Support Points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1024
+msgid "Do you want to save your manually edited support points?"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1025
+msgid "Save changes?"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1168
+msgid ""
+"Autogeneration will erase all manually edited points.\n"
+"\n"
+"Are you sure you want to do it?\n"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1170 src/slic3r/GUI/GUI.cpp:283
+#: src/slic3r/GUI/WipeTowerDialog.cpp:44 src/slic3r/GUI/WipeTowerDialog.cpp:328
+msgid "Warning"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1202
+msgid "SLA gizmo keyboard shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213
+msgid "Note: some shortcuts work in (non)editing mode only."
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235
+msgid "Left click"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1231
+msgid "Add point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
+msgid "Right click"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1232
+msgid "Remove point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
+msgid "Drag"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1233
+msgid "Move point"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1234
+msgid "Add point to selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1235
+msgid "Remove point from selection"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1236
+msgid "Select by rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1237
+msgid "Deselect by rectangle"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1238
+msgid "Select all points"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240
+msgid "Mouse wheel"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1240
+msgid "Move clipping plane"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1241
+msgid "Reset clipping plane"
+msgstr ""
+
+#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1244
+msgid "Switch to editing mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI.cpp:142 src/slic3r/GUI/Tab.cpp:2816
+msgid "It's impossible to print multi-part object(s) with SLA technology."
+msgstr ""
+
+#: src/slic3r/GUI/GUI.cpp:143
+msgid "Please check and fix your object list."
+msgstr ""
+
+#: src/slic3r/GUI/GUI.cpp:144 src/slic3r/GUI/Tab.cpp:2818
+msgid "Attention!"
+msgstr ""
+
+#: src/slic3r/GUI/GUI.cpp:277
+msgid "Notice"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:393
+msgid "Changing of an application language"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:401 src/slic3r/GUI/GUI_App.cpp:410
+msgid "Recreating"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:414
+msgid "Loading of current presets"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:422
+msgid "Loading of a mode view"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:504
+msgid "Choose one file (3MF):"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:516
+msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:558
+msgid "Select the language"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:559
+msgid "Language"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:710
+msgid "&Configuration Snapshots"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:710
+msgid "Inspect / activate configuration snapshots"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:711
+msgid "Take Configuration &Snapshot"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:711
+msgid "Capture a configuration snapshot"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:714
+msgid "&Preferences"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:720
+msgid "Application preferences"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:723 src/slic3r/GUI/wxExtensions.cpp:2509
+msgid "Simple"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:723
+msgid "Simple View Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:724 src/slic3r/GUI/GUI_ObjectList.cpp:85
+#: src/slic3r/GUI/GUI_ObjectList.cpp:539 src/slic3r/GUI/Tab.cpp:1030
+#: src/slic3r/GUI/Tab.cpp:1045 src/slic3r/GUI/Tab.cpp:1143
+#: src/slic3r/GUI/Tab.cpp:1146 src/slic3r/GUI/Tab.cpp:1520
+#: src/slic3r/GUI/Tab.cpp:1946 src/slic3r/GUI/Tab.cpp:3461
+#: src/slic3r/GUI/wxExtensions.cpp:2510 src/libslic3r/PrintConfig.cpp:73
+#: src/libslic3r/PrintConfig.cpp:188 src/libslic3r/PrintConfig.cpp:351
+#: src/libslic3r/PrintConfig.cpp:989 src/libslic3r/PrintConfig.cpp:2200
+msgid "Advanced"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:724
+msgid "Advanced View Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:725 src/slic3r/GUI/wxExtensions.cpp:2511
+msgid "Expert"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:725
+msgid "Expert View Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:730
+msgid "Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:730
+#, possible-c-format
+msgid "%s View Mode"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:732
+msgid "Change Application &Language"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:734
+msgid "Flash printer &firmware"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:734
+msgid "Upload a firmware image into an Arduino based printer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:746
+msgid "Taking configuration snapshot"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:746
+msgid "Snapshot name"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:789
+msgid ""
+"Switching the language will trigger application restart.\n"
+"You will lose content of the plater."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:791
+msgid "Do you want to proceed?"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:792
+msgid "Language selection"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:811
+msgid "&Configuration"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:831
+msgid "The presets on the following tabs were modified"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:831 src/slic3r/GUI/Tab.cpp:2804
+msgid "Discard changes and continue anyway?"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_App.cpp:832
+msgid "Unsaved Presets"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:28 src/slic3r/GUI/GUI_ObjectList.cpp:77
+#: src/slic3r/GUI/GUI_ObjectList.cpp:531 src/libslic3r/PrintConfig.cpp:57
+#: src/libslic3r/PrintConfig.cpp:151 src/libslic3r/PrintConfig.cpp:382
+#: src/libslic3r/PrintConfig.cpp:439 src/libslic3r/PrintConfig.cpp:447
+#: src/libslic3r/PrintConfig.cpp:843 src/libslic3r/PrintConfig.cpp:1027
+#: src/libslic3r/PrintConfig.cpp:1330 src/libslic3r/PrintConfig.cpp:1396
+#: src/libslic3r/PrintConfig.cpp:1577 src/libslic3r/PrintConfig.cpp:2012
+#: src/libslic3r/PrintConfig.cpp:2069
+msgid "Layers and Perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:29 src/slic3r/GUI/GUI_ObjectList.cpp:78
+#: src/slic3r/GUI/GUI_ObjectList.cpp:532 src/slic3r/GUI/Plater.cpp:447
+#: src/slic3r/GUI/Tab.cpp:1034 src/slic3r/GUI/Tab.cpp:1035
+#: src/slic3r/GUI/Tab.cpp:1364 src/libslic3r/PrintConfig.cpp:168
+#: src/libslic3r/PrintConfig.cpp:390 src/libslic3r/PrintConfig.cpp:730
+#: src/libslic3r/PrintConfig.cpp:744 src/libslic3r/PrintConfig.cpp:781
+#: src/libslic3r/PrintConfig.cpp:934 src/libslic3r/PrintConfig.cpp:944
+#: src/libslic3r/PrintConfig.cpp:962 src/libslic3r/PrintConfig.cpp:980
+#: src/libslic3r/PrintConfig.cpp:999 src/libslic3r/PrintConfig.cpp:1684
+#: src/libslic3r/PrintConfig.cpp:1701
+msgid "Infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:30 src/slic3r/GUI/GUI_ObjectList.cpp:79
+#: src/slic3r/GUI/GUI_ObjectList.cpp:533 src/slic3r/GUI/GUI_Preview.cpp:236
+#: src/slic3r/GUI/Tab.cpp:1063 src/slic3r/GUI/Tab.cpp:1064
+#: src/libslic3r/PrintConfig.cpp:335 src/libslic3r/PrintConfig.cpp:1457
+#: src/libslic3r/PrintConfig.cpp:1805 src/libslic3r/PrintConfig.cpp:1811
+#: src/libslic3r/PrintConfig.cpp:1819 src/libslic3r/PrintConfig.cpp:1831
+#: src/libslic3r/PrintConfig.cpp:1841 src/libslic3r/PrintConfig.cpp:1849
+#: src/libslic3r/PrintConfig.cpp:1864 src/libslic3r/PrintConfig.cpp:1885
+#: src/libslic3r/PrintConfig.cpp:1896 src/libslic3r/PrintConfig.cpp:1912
+#: src/libslic3r/PrintConfig.cpp:1921 src/libslic3r/PrintConfig.cpp:1930
+#: src/libslic3r/PrintConfig.cpp:1941 src/libslic3r/PrintConfig.cpp:1955
+#: src/libslic3r/PrintConfig.cpp:1963 src/libslic3r/PrintConfig.cpp:1964
+#: src/libslic3r/PrintConfig.cpp:1973 src/libslic3r/PrintConfig.cpp:1981
+#: src/libslic3r/PrintConfig.cpp:1995 src/libslic3r/GCode/PreviewData.cpp:172
+msgid "Support material"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:33 src/slic3r/GUI/GUI_ObjectList.cpp:81
+#: src/slic3r/GUI/GUI_ObjectList.cpp:535 src/slic3r/GUI/Tab.cpp:1123
+#: src/slic3r/GUI/Tab.cpp:1850 src/libslic3r/PrintConfig.cpp:457
+#: src/libslic3r/PrintConfig.cpp:955 src/libslic3r/PrintConfig.cpp:1365
+#: src/libslic3r/PrintConfig.cpp:1693 src/libslic3r/PrintConfig.cpp:1877
+#: src/libslic3r/PrintConfig.cpp:1903 src/libslic3r/PrintConfig.cpp:2176
+#: src/libslic3r/PrintConfig.cpp:2184
+msgid "Extruders"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:39
+msgid "Pad and Support"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:45
+msgid "Add part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:46
+msgid "Add modifier"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:47
+msgid "Add support enforcer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:48
+msgid "Add support blocker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:80 src/slic3r/GUI/GUI_ObjectList.cpp:534
+#: src/slic3r/GUI/GUI_Preview.cpp:215 src/slic3r/GUI/Tab.cpp:1088
+#: src/libslic3r/PrintConfig.cpp:200 src/libslic3r/PrintConfig.cpp:427
+#: src/libslic3r/PrintConfig.cpp:872 src/libslic3r/PrintConfig.cpp:1000
+#: src/libslic3r/PrintConfig.cpp:1386 src/libslic3r/PrintConfig.cpp:1623
+#: src/libslic3r/PrintConfig.cpp:1672 src/libslic3r/PrintConfig.cpp:1723
+#: src/libslic3r/PrintConfig.cpp:2054
+msgid "Speed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:82 src/slic3r/GUI/GUI_ObjectList.cpp:536
+#: src/libslic3r/PrintConfig.cpp:417 src/libslic3r/PrintConfig.cpp:524
+#: src/libslic3r/PrintConfig.cpp:831 src/libslic3r/PrintConfig.cpp:963
+#: src/libslic3r/PrintConfig.cpp:1374 src/libslic3r/PrintConfig.cpp:1713
+#: src/libslic3r/PrintConfig.cpp:1886 src/libslic3r/PrintConfig.cpp:2043
+msgid "Extrusion Width"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:87 src/slic3r/GUI/GUI_ObjectList.cpp:541
+#: src/slic3r/GUI/Plater.cpp:429 src/slic3r/GUI/Tab.cpp:3423
+#: src/slic3r/GUI/Tab.cpp:3424 src/libslic3r/PrintConfig.cpp:2388
+#: src/libslic3r/PrintConfig.cpp:2395 src/libslic3r/PrintConfig.cpp:2404
+#: src/libslic3r/PrintConfig.cpp:2413 src/libslic3r/PrintConfig.cpp:2423
+#: src/libslic3r/PrintConfig.cpp:2449 src/libslic3r/PrintConfig.cpp:2456
+#: src/libslic3r/PrintConfig.cpp:2467 src/libslic3r/PrintConfig.cpp:2477
+#: src/libslic3r/PrintConfig.cpp:2486 src/libslic3r/PrintConfig.cpp:2496
+#: src/libslic3r/PrintConfig.cpp:2505 src/libslic3r/PrintConfig.cpp:2515
+#: src/libslic3r/PrintConfig.cpp:2525 src/libslic3r/PrintConfig.cpp:2533
+msgid "Supports"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:88 src/slic3r/GUI/GUI_ObjectList.cpp:542
+#: src/slic3r/GUI/Tab.cpp:3451 src/slic3r/GUI/Tab.cpp:3452
+#: src/libslic3r/PrintConfig.cpp:2541 src/libslic3r/PrintConfig.cpp:2548
+#: src/libslic3r/PrintConfig.cpp:2562 src/libslic3r/PrintConfig.cpp:2572
+#: src/libslic3r/PrintConfig.cpp:2585 src/libslic3r/PrintConfig.cpp:2594
+msgid "Pad"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:203
+msgid "Name"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:257
+#, possible-c-format
+msgid "Auto-repaired (%d errors):\n"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:264
+msgid "degenerate facets"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:265
+msgid "edges fixed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:266
+msgid "facets removed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:267
+msgid "facets added"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:268
+msgid "facets reversed"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:269
+msgid "backwards edges"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:277
+msgid "Right button click the icon to fix STL through Netfabb"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:306
+msgid "Right button click the icon to change the object settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:357 src/slic3r/GUI/GUI_ObjectList.cpp:378
+#: src/slic3r/GUI/GUI_ObjectList.cpp:390 src/slic3r/GUI/GUI_ObjectList.cpp:2846
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2856
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2888 src/slic3r/GUI/wxExtensions.cpp:499
+#: src/slic3r/GUI/wxExtensions.cpp:524
+msgid "default"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:362 src/slic3r/GUI/Tab.cpp:1484
+#: src/libslic3r/PrintConfig.cpp:456
+msgid "Extruder"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:876 src/slic3r/GUI/GUI_ObjectList.cpp:1151
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1157
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1384
+#, possible-c-format
+msgid "Quick Add Settings (%s)"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:939
+msgid "Select showing settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1072
+msgid "Load"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1102
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1105
+msgid "Box"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
+msgid "Cylinder"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
+msgid "Sphere"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1077
+msgid "Slab"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1130
+msgid "Add settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1197
+msgid "Change type"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1204
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1338
+msgid "Set as a Separated Object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1210
+msgid "Rename"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1220
+msgid "Fix through the Netfabb"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1229 src/slic3r/GUI/Plater.cpp:2969
+msgid "Export as STL"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1236
+msgid "Change extruder"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1255 src/libslic3r/PrintConfig.cpp:300
+msgid "Default"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1261
+msgid "Select new extruder for the object/part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1338
+msgid "Set as a Separated Objects"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1551
+msgid "Generic"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1694
+msgid "You can't delete the last solid part from object."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1711
+msgid "You can't delete the last intance from object."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1737 src/slic3r/GUI/Plater.cpp:2306
+msgid ""
+"The selected object couldn't be split because it contains only one part."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1846
+msgid "Group manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1858
+msgid "Object manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1868
+msgid "Object Settings to modify"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1872
+msgid "Part Settings to modify"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1881
+msgid "Part manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:1887
+msgid "Instance manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2412
+msgid "Object or Instance"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2412
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2543
+msgid "Part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2414
+msgid "Unsupported selection"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2415
+#, possible-c-format
+msgid "You started your selection with %s Item."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2416
+#, possible-c-format
+msgid "In this mode you can select only other %s Items%s"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2419
+msgid "of a current Object"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2424
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2497 src/slic3r/GUI/Plater.cpp:118
+msgid "Info"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2538
+msgid "You can't change a type of the last solid part of the object."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2543
+msgid "Modifier"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2543
+msgid "Support Enforcer"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2543
+msgid "Support Blocker"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2545
+msgid "Type:"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2545
+msgid "Select type of part"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2709
+msgid "Enter new name"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2709
+msgid "Renaming"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2725
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2819 src/slic3r/GUI/Tab.cpp:3304
+#: src/slic3r/GUI/Tab.cpp:3308
+msgid "The supplied name is not valid;"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2726
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2820 src/slic3r/GUI/Tab.cpp:3305
+msgid "the following characters are not allowed:"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2836
+msgid "Set extruder for selected items"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2837
+msgid "Select extruder number for selected objects and/or parts"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2850
+msgid "Select extruder number:"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectList.cpp:2851
+msgid "This extruder will be set for selected items"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:40
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:83
+msgid "World coordinates"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:41
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:84
+msgid "Local coordinates"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:60
+msgid "Select coordinate space, in which the transformation will be performed."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:102
+msgid "Object Manipulation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:153
+msgid "Object name"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:229
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:282
+msgid "Position"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:230
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:283
+msgid "Rotation"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:284
+msgid "Scale factors"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
+msgid "Translate"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:640
+msgid ""
+"The currently manipulated object is tilted (rotation angles are not "
+"multiples of 90°).\n"
+"Non-uniform scaling of tilted objects is only possible in the World "
+"coordinate system,\n"
+"once the rotation is embedded into the object coordinates."
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:643
+msgid ""
+"This operation is irreversible.\n"
+"Do you want to proceed?"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:58
+msgid "Additional Settings"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_ObjectSettings.cpp:83
+msgid "Remove parameter"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:209
+msgid "View"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:212 src/slic3r/GUI/GUI_Preview.cpp:537
+#: src/libslic3r/GCode/PreviewData.cpp:394
+msgid "Feature type"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:213 src/libslic3r/PrintConfig.cpp:469
+msgid "Height"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:214 src/libslic3r/PrintConfig.cpp:2162
+msgid "Width"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:216
+msgid "Volumetric flow rate"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:217 src/slic3r/GUI/GUI_Preview.cpp:315
+#: src/slic3r/GUI/GUI_Preview.cpp:481 src/slic3r/GUI/GUI_Preview.cpp:537
+#: src/slic3r/GUI/GUI_Preview.cpp:713 src/libslic3r/GCode/PreviewData.cpp:404
+msgid "Tool"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:218 src/slic3r/GUI/GUI_Preview.cpp:535
+#: src/libslic3r/GCode/PreviewData.cpp:406
+msgid "Color Print"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:221
+msgid "Show"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:224 src/slic3r/GUI/GUI_Preview.cpp:225
+msgid "Feature types"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:227 src/libslic3r/GCode/PreviewData.cpp:163
+msgid "Perimeter"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:228 src/libslic3r/GCode/PreviewData.cpp:164
+msgid "External perimeter"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:229 src/libslic3r/GCode/PreviewData.cpp:165
+msgid "Overhang perimeter"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:230 src/libslic3r/GCode/PreviewData.cpp:166
+msgid "Internal infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:231 src/libslic3r/PrintConfig.cpp:1712
+#: src/libslic3r/PrintConfig.cpp:1722 src/libslic3r/GCode/PreviewData.cpp:167
+msgid "Solid infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:232 src/libslic3r/PrintConfig.cpp:2042
+#: src/libslic3r/PrintConfig.cpp:2053 src/libslic3r/GCode/PreviewData.cpp:168
+msgid "Top solid infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:233 src/libslic3r/GCode/PreviewData.cpp:169
+msgid "Bridge infill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:234 src/libslic3r/PrintConfig.cpp:871
+#: src/libslic3r/GCode/PreviewData.cpp:170
+msgid "Gap fill"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:235 src/slic3r/GUI/Tab.cpp:1054
+#: src/libslic3r/GCode/PreviewData.cpp:171
+msgid "Skirt"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:237 src/libslic3r/PrintConfig.cpp:1929
+#: src/libslic3r/GCode/PreviewData.cpp:173
+msgid "Support material interface"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:238 src/slic3r/GUI/Tab.cpp:1134
+#: src/libslic3r/GCode/PreviewData.cpp:174
+msgid "Wipe tower"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:243 src/libslic3r/PrintConfig.cpp:2076
+msgid "Travel"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:244
+msgid "Retractions"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:245
+msgid "Unretractions"
+msgstr ""
+
+#: src/slic3r/GUI/GUI_Preview.cpp:246
+msgid "Shells"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:13 src/slic3r/GUI/MainFrame.cpp:571
+msgid "Keyboard Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
+msgid "Open project STL/OBJ/AMF/3MF with config, delete bed"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
+msgid "Import STL/OBJ/AMF/3MF without config, keep bed"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:107
+msgid "Load Config from .ini/amf/3mf/gcode"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:108 src/slic3r/GUI/Plater.cpp:740
+#: src/slic3r/GUI/Plater.cpp:3864 src/libslic3r/PrintConfig.cpp:2990
+msgid "Export G-code"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
+msgid "Save project (3MF)"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:110
+msgid "Load Config from .ini/amf/3mf/gcode and merge"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:111
+msgid "(Re)slice"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
+msgid "Select Plater Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:116
+msgid "Select Print Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:117
+msgid "Select Filament Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:118
+msgid "Select Printer Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:119
+msgid "Switch to 3D"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:120
+msgid "Switch to Preview"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:121 src/slic3r/GUI/Preferences.cpp:10
+msgid "Preferences"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:122
+#: src/slic3r/GUI/PrintHostDialogs.cpp:135
+msgid "Print host upload queue"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:123
+msgid "Camera view"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:124
+msgid "Add Instance of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:125
+msgid "Remove Instance of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:126
+msgid "Show keyboard shortcuts list"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
+msgid "Press to select multiple object or move multiple object with mouse"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
+msgid "Main Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
+msgid "Select All objects"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
+msgid "Delete selected"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
+msgid "Delete All"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
+msgid "Copy to clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:140
+msgid "Paste from clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
+msgid "Gizmo move"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:142
+msgid "Gizmo scale"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:143
+msgid "Gizmo rotate"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
+msgid "Gizmo cut"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:145
+msgid "Gizmo Place face on bed"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
+msgid "Gizmo SLA support points"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
+#, possible-c-format
+msgid ""
+"Press to snap by 5% in Gizmo scale\n"
+"or by 1mm in Gizmo move"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:148
+msgid ""
+"Press to scale or rotate selected objects\n"
+"around their own center"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:149
+msgid "Zoom to Bed"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:150
+msgid "Zoom to all objects in scene, if none selected"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:151
+msgid "Zoom to selected object"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:152
+msgid "Zoom in"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:153
+msgid "Zoom out"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:154
+msgid "Unselect gizmo, keep object selection"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:156
+msgid "Plater Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
+msgid "Arrow Up"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:171
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:173
+msgid "Upper Layer"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
+msgid "Arrow Down"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:172
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:174
+msgid "Lower Layer"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:176
+msgid "Preview Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:182
+msgid "Move current slider thumb Up"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:183
+msgid "Move current slider thumb Down"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
+msgid "Arrow Left"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:184
+msgid "Set upper thumb to current slider thumb"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
+msgid "Arrow Right"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:185
+msgid "Set lower thumb to current slider thumb"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:186
+msgid "Add color change marker for current layer"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:187
+msgid "Delete color change marker for current layer"
+msgstr ""
+
+#: src/slic3r/GUI/KBShortcutsDialog.cpp:189
+msgid "Layers Slider Shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:36
+msgid "based on Slic3r"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:61
+msgid ""
+" - Remember to check for updates at http://github.com/prusa3d/PrusaSlicer/"
+"releases"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:163
+msgid "Plater"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:344
+msgid "&Open Project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:344
+msgid "Open a project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:346
+msgid "&Save Project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:346
+msgid "Save current project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:348
+msgid "Save Project &as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:348
+msgid "Save current project file as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:354
+msgid "Import STL/OBJ/AM&F/3MF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:354
+msgid "Load a model"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:357
+msgid "Import &Config"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:357
+msgid "Load exported configuration file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:359
+msgid "Import Config from &project"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:359
+msgid "Load configuration from project file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:362
+msgid "Import Config &Bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:362
+msgid "Load presets from a bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:364
+msgid "&Import"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:367 src/slic3r/GUI/MainFrame.cpp:607
+msgid "Export &G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:367
+msgid "Export current plate as G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:371
+msgid "Export plate as &STL"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:371
+msgid "Export current plate as STL"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:373
+msgid "Export plate as STL including supports"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:373
+msgid "Export current plate as STL including supports"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:375
+msgid "Export plate as &AMF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:375
+msgid "Export current plate as AMF"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:378
+msgid "Export &Config"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:378
+msgid "Export current configuration to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:380
+msgid "Export Config &Bundle"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:380
+msgid "Export all presets to file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:382
+msgid "&Export"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:388
+msgid "Quick Slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:388
+msgid "Slice a file into a G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:394
+msgid "Quick Slice and Save As"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:394
+msgid "Slice a file into a G-code, save as"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:400
+msgid "Repeat Last Quick Slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:400
+msgid "Repeat last quick slice"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:408
+msgid "(Re)Slice &Now"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:408
+msgid "Start new slicing process"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:411
+msgid "&Repair STL file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:411
+msgid "Automatically repair an STL file"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:414
+msgid "&Quit"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:414
+#, possible-c-format
+msgid "Quit %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:449
+msgid "&Select all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:449
+msgid "Selects all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:452
+msgid "&Delete selected"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:452
+msgid "Deletes the current selection"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:454
+msgid "Delete &all"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:454
+msgid "Deletes all objects"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:459
+msgid "&Copy"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:459
+msgid "Copy selection to clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:461
+msgid "&Paste"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:461
+msgid "Paste clipboard"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:476
+msgid "&Plater Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:476
+msgid "Show the plater"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:483
+msgid "P&rint Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:483
+msgid "Show the print settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:485 src/slic3r/GUI/MainFrame.cpp:609
+msgid "&Filament Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:485
+msgid "Show the filament settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:488
+msgid "Print&er Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:488
+msgid "Show the printer settings"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:492
+msgid "3&D"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:492
+msgid "Show the 3D editing view"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:494
+msgid "Pre&view"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:494
+msgid "Show the 3D slices preview"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:515
+msgid "Print &Host Upload Queue"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:515
+msgid "Display the Print Host Upload Queue window"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:524
+msgid "Iso"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:524
+msgid "Iso View"
+msgstr ""
+
+#. TRN To be shown in the main menu View->Top
+#: src/slic3r/GUI/MainFrame.cpp:527
+msgid "Top"
+msgstr ""
+
+#. TRN To be shown in Print Settings "Top solid layers"
+#: src/libslic3r/PrintConfig.cpp:2068
+msgctxt "Layers"
+msgid "Top"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:527
+msgid "Top View"
+msgstr ""
+
+#. TRN To be shown in the main menu View->Bottom
+#: src/slic3r/GUI/MainFrame.cpp:529
+msgid "Bottom"
+msgstr ""
+
+#. TRN To be shown in Print Settings "Bottom solid layers"
+#: src/libslic3r/PrintConfig.cpp:150
+msgctxt "Layers"
+msgid "Bottom"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:529
+msgid "Bottom View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:530
+msgid "Front"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:530
+msgid "Front View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:531 src/libslic3r/PrintConfig.cpp:1587
+msgid "Rear"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:531
+msgid "Rear View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:532
+msgid "Left"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:532
+msgid "Left View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:533
+msgid "Right"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:533
+msgid "Right View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:547
+msgid "Prusa 3D &Drivers"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:547
+msgid "Open the Prusa3D drivers download page in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:549
+msgid "Software &Releases"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:549
+msgid "Open the software releases page in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:555
+#, possible-c-format
+msgid "%s &Website"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:556
+#, possible-c-format
+msgid "Open the %s website in your browser"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:562
+msgid "System &Info"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:562
+msgid "Show system information"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:564
+msgid "Show &Configuration Folder"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:564
+msgid "Show user configuration folder (datadir)"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:566
+msgid "Report an I&ssue"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:566
+#, possible-c-format
+msgid "Report an issue on %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:568
+#, possible-c-format
+msgid "&About %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:568
+msgid "Show about dialog"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:571
+msgid "Show the list of the keyboard shortcuts"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:579
+msgid "&File"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:580
+msgid "&Edit"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:581
+msgid "&Window"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:582
+msgid "&View"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:585
+msgid "&Help"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:607 src/slic3r/GUI/Plater.cpp:3864
+msgid "Export"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:609
+msgid "Mate&rial Settings Tab"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:630
+msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:644
+msgid "No previously sliced file."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:645 src/slic3r/GUI/PrintHostDialogs.cpp:230
+msgid "Error"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:650
+msgid "Previously sliced file ("
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:650
+msgid ") not found."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:651
+msgid "File Not Found"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:686
+#, possible-c-format
+msgid "Save %s file as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:686
+msgid "SVG"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:686
+msgid "G-code"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:701
+msgid "Save zip file as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:713 src/slic3r/GUI/Plater.cpp:2439
+#: src/slic3r/GUI/Plater.cpp:3658 src/slic3r/GUI/Tab.cpp:1163
+#: src/slic3r/GUI/Tab.cpp:3462
+msgid "Slicing"
+msgstr ""
+
+#. TRN "Processing input_file_basename"
+#: src/slic3r/GUI/MainFrame.cpp:715
+#, possible-c-format
+msgid "Processing %s"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:738
+msgid " was successfully sliced."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:740
+msgid "Slicing Done!"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:755
+msgid "Select the STL file to repair:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:768
+msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:783
+msgid "Your file was repaired."
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:783 src/libslic3r/PrintConfig.cpp:3084
+msgid "Repair"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:797
+msgid "Save configuration as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:817 src/slic3r/GUI/MainFrame.cpp:881
+msgid "Select configuration to load:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:854
+msgid "Save presets bundle as:"
+msgstr ""
+
+#: src/slic3r/GUI/MainFrame.cpp:905
+#, possible-c-format
+msgid "%d presets successfully imported."
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:73
+#, possible-c-format
+msgid "%s error"
+msgstr ""
+
+#: src/slic3r/GUI/MsgDialog.cpp:74
+#, possible-c-format
+msgid "%s has encountered an error"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:138
+msgid "Volume"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:139
+msgid "Facets"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:140
+msgid "Materials"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:143
+msgid "Manifold"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:193
+msgid "Sliced Info"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:212 src/slic3r/GUI/Plater.cpp:1048
+msgid "Used Filament (m)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:213
+msgid "Used Filament (mm³)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:214
+msgid "Used Filament (g)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:215
+msgid "Used Material (unit)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:216 src/slic3r/GUI/Plater.cpp:1063
+#: src/libslic3r/PrintConfig.cpp:718
+msgid "Cost"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:217 src/slic3r/GUI/Plater.cpp:1035
+#: src/slic3r/GUI/Plater.cpp:1077
+msgid "Estimated printing time"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:218
+msgid "Number of tool changes"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:292
+msgid "Click to edit preset"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:432
+msgid "Select what kind of support do you need"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:434 src/libslic3r/PrintConfig.cpp:1840
+#: src/libslic3r/PrintConfig.cpp:2448
+msgid "Support on build plate only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:435 src/slic3r/GUI/Plater.cpp:528
+msgid "For support enforcers only"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:436
+msgid "Everywhere"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:454 src/slic3r/GUI/Tab.cpp:1060
+msgid "Brim"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:456
+msgid ""
+"This flag enables the brim that will be printed around each object on the "
+"first layer."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:464
+msgid "Purging volumes"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:688
+msgid "Print settings"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:689 src/slic3r/GUI/Tab.cpp:1475
+#: src/slic3r/GUI/Tab.cpp:1476
+msgid "Filament"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:690
+msgid "SLA print settings"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:691 src/slic3r/GUI/Preset.cpp:1277
+msgid "SLA material"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:692
+msgid "Printer"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:738 src/slic3r/GUI/Plater.cpp:3865
+msgid "Send to printer"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:741 src/slic3r/GUI/Plater.cpp:2439
+#: src/slic3r/GUI/Plater.cpp:3661
+msgid "Slice now"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:880
+msgid "Hold Shift to Slice & Export G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:981
+#, possible-c-format
+msgid "%d (%d shells)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:986
+#, possible-c-format
+msgid "Auto-repaired (%d errors)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:989
+#, possible-c-format
+msgid ""
+"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
+"facets reversed, %d backwards edges"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:999
+msgid "Yes"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1022
+msgid "Used Material (ml)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1025
+msgid "object(s)"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1025
+msgid "supports and pad"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1050 src/slic3r/GUI/Plater.cpp:1065
+msgid "objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1050 src/slic3r/GUI/Plater.cpp:1065
+msgid "wipe tower"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1080
+msgid "normal mode"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1084
+msgid "stealth mode"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1604
+msgid "Loading"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1614
+#, possible-c-format
+msgid "Processing input file %s\n"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1672
+msgid ""
+"This file contains several objects positioned at multiple heights. Instead "
+"of considering them as multiple objects, should I consider\n"
+"this file as a single object having multiple parts?\n"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1675 src/slic3r/GUI/Plater.cpp:1783
+msgid "Multi-part object detected"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1726
+msgid ""
+"This file cannot be loaded in a simple mode. Do you want to switch to an "
+"advanced mode?\n"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1727
+msgid "Detected advanced data"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1760
+#, possible-c-format
+msgid ""
+"You can't to add the object(s) from %s because of one or some of them "
+"is(are) multi-part"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1780
+msgid ""
+"Multiple objects were loaded for a multi-material printer.\n"
+"Instead of considering them as multiple objects, should I consider\n"
+"these files to represent a single object having multiple parts?\n"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1796
+msgid "Loaded"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1894
+msgid ""
+"Your object appears to be too large, so it was automatically scaled down to "
+"fit your print bed."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1895
+msgid "Object too large?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1945
+msgid "Export STL file:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1952
+msgid "Export AMF file:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:1958
+msgid "Save file as:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2123
+msgid "Arranging canceled"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2126
+msgid "Arranging"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2163
+msgid "Could not arrange model objects! Some geometries may be invalid."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2170
+msgid "Arranging done."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2211
+msgid "Orientation search canceled"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2216
+msgid "Searching for optimal orientation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2278
+msgid "Orientation found."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2298
+msgid ""
+"The selected object can't be split because it contains more than one volume/"
+"material."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2424
+msgid "Invalid data"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2433
+msgid "Ready to slice"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2471 src/slic3r/GUI/PrintHostDialogs.cpp:231
+msgid "Cancelling"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2488
+msgid "Another export job is currently running."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2749
+msgid "Export failed"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2754 src/slic3r/GUI/PrintHostDialogs.cpp:232
+msgid "Cancelled"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2840 src/slic3r/GUI/Plater.cpp:2852
+#: src/slic3r/GUI/Plater.cpp:2939
+msgid "Increase copies"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2933 src/slic3r/GUI/Plater.cpp:2951
+msgid "Remove the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2939
+msgid "Place one more copy of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2941
+msgid "Decrease copies"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2941
+msgid "Remove one copy of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2943
+msgid "Set number of copies"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2943
+msgid "Change the number of copies of the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2966
+msgid "Reload from Disk"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2966
+msgid "Reload the selected file from Disk"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2969
+msgid "Export the selected object as STL file"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2981
+msgid "Along X axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2981
+msgid "Mirror the selected object along the X axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2983
+msgid "Along Y axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2983
+msgid "Mirror the selected object along the Y axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2985
+msgid "Along Z axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2985
+msgid "Mirror the selected object along the Z axis"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2988
+msgid "Mirror"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:2988
+msgid "Mirror the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3008
+msgid "To objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3008 src/slic3r/GUI/Plater.cpp:3030
+msgid "Split the selected object into individual objects"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3010
+msgid "To parts"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3010 src/slic3r/GUI/Plater.cpp:3050
+msgid "Split the selected object into individual sub-parts"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3013 src/slic3r/GUI/Plater.cpp:3030
+#: src/slic3r/GUI/Plater.cpp:3050 src/libslic3r/PrintConfig.cpp:3108
+msgid "Split"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3013
+msgid "Split the selected object"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3036
+msgid "Optimize orientation"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3036
+msgid "Optimize the rotation of the object for better print results."
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3099
+msgid "3D editor view"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3110 src/slic3r/GUI/Tab.cpp:2294
+msgid "Preview"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3341
+msgid "All objects will be removed, continue ?"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3476
+msgid "Save G-code file as:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3476
+msgid "Save SL1 file as:"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3588
+#, possible-c-format
+msgid "STL file exported to %s"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3604
+#, possible-c-format
+msgid "AMF file exported to %s"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3607
+#, possible-c-format
+msgid "Error exporting AMF file %s"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3633
+#, possible-c-format
+msgid "3MF file exported to %s"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3636
+#, possible-c-format
+msgid "Error exporting 3MF file %s"
+msgstr ""
+
+#: src/slic3r/GUI/Plater.cpp:3865
+msgid "Send G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:19 src/slic3r/GUI/Tab.cpp:1818
+#: src/slic3r/GUI/Tab.cpp:2019
+msgid "General"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:36
+msgid "Remember output directory"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:38
+msgid ""
+"If this is enabled, Slic3r will prompt the last output directory instead of "
+"the one containing the input files."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:44
+msgid "Auto-center parts"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:46
+msgid ""
+"If this is enabled, Slic3r will auto-center objects around the print bed "
+"center."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:52
+msgid "Background processing"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:54
+msgid ""
+"If this is enabled, Slic3r will pre-process objects as soon as they're "
+"loaded in order to save time when exporting G-code."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:63
+msgid ""
+"If enabled, PrusaSlicer will check for the new versions of itself online. "
+"When a new version becomes available a notification is displayed at the next "
+"application startup (never during program usage). This is only a "
+"notification mechanisms, no automatic installation is done."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:71
+msgid ""
+"If enabled, Slic3r downloads updates of built-in system presets in the "
+"background. These updates are downloaded into a separate temporary location. "
+"When a new preset version becomes available it is offered at application "
+"startup."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:76
+msgid "Suppress \" - default - \" presets"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:78
+msgid ""
+"Suppress \" - default - \" presets in the Print / Filament / Printer "
+"selections once there are any other valid presets available."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:84
+msgid "Show incompatible print and filament presets"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:86
+msgid ""
+"When checked, the print and filament presets are shown in the preset editor "
+"even if they are marked as incompatible with the active printer"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:93
+msgid "Use legacy OpenGL 1.1 rendering"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:95
+msgid ""
+"If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
+"try to check this checkbox. This will disable the layer height editing and "
+"anti aliasing, so it is likely better to upgrade your graphics driver."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:103
+msgid "Use Retina resolution for the 3D scene"
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:105
+msgid ""
+"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
+"experiencing 3D performance problems, disabling this option may help."
+msgstr ""
+
+#: src/slic3r/GUI/Preferences.cpp:130
+#, possible-c-format
+msgid "You need to restart %s to make the changes effective."
+msgstr ""
+
+#: src/slic3r/GUI/Preset.cpp:207
+msgid "modified"
+msgstr ""
+
+#: src/slic3r/GUI/Preset.cpp:930 src/slic3r/GUI/Preset.cpp:970
+#: src/slic3r/GUI/Preset.cpp:1035 src/slic3r/GUI/Preset.cpp:1067
+#: src/slic3r/GUI/PresetBundle.cpp:1488 src/slic3r/GUI/PresetBundle.cpp:1553
+msgid "System presets"
+msgstr ""
+
+#: src/slic3r/GUI/Preset.cpp:974 src/slic3r/GUI/Preset.cpp:1071
+#: src/slic3r/GUI/PresetBundle.cpp:1558
+msgid "User presets"
+msgstr ""
+
+#: src/slic3r/GUI/Preset.cpp:1003 src/slic3r/GUI/Tab.cpp:240
+msgid "Add a new printer"
+msgstr ""
+
+#: src/slic3r/GUI/Preset.cpp:1275
+msgid "filament"
+msgstr ""
+
+#: src/slic3r/GUI/Preset.cpp:1276
+msgid "SLA print"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:28
+msgid ""
+"If estimated layer time is below ~%1%s, fan will run at %2%%% and print "
+"speed will be reduced so that no less than %3%s are spent on that layer "
+"(however, speed will never be reduced below %4%mm/s)."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:35
+msgid ""
+"\n"
+"If estimated layer time is greater, but still below ~%1%s, fan will run at a "
+"proportionally decreasing speed between %2%%% and %3%%%."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:39
+msgid ""
+"\n"
+"During the other layers, fan"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:41
+msgid "Fan"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:47
+msgid "will always run at %1%%%"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:50
+msgid "except for the first %1% layers."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:52
+msgid "except for the first layer."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:54
+msgid "will be turned off."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:155
+msgid "external perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:164
+msgid "perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:173
+msgid "infill"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:183
+msgid "solid infill"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:191
+msgid "top solid infill"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:202
+msgid "support"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:212
+msgid "support interface"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:218
+msgid "First layer volumetric"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:218
+msgid "Bridging volumetric"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:218
+msgid "Volumetric"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:219
+msgid "flow rate is maximized"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:222
+msgid "by the print profile maximum"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:223
+msgid "when printing"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:224
+msgid "with a volumetric rate"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:228
+#, possible-c-format
+msgid "%3.2f mm³/s at filament speed %3.2f mm/s."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:246
+msgid ""
+"Recommended object thin wall thickness: Not available due to invalid layer "
+"height."
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:262
+#, possible-c-format
+msgid "Recommended object thin wall thickness for layer height %.2f and"
+msgstr ""
+
+#: src/slic3r/GUI/PresetHints.cpp:268
+#, possible-c-format
+msgid "%d lines: %.2f mm"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:33
+msgid "Send G-Code to printer host"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:33
+msgid "Upload to Printer Host with the following filename:"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:35
+msgid "Start printing after upload"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:42
+msgid "Use forward slashes ( / ) as a directory separator if needed."
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:148
+msgid "ID"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:149
+msgid "Progress"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:150
+msgid "Status"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:151
+msgid "Host"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:152
+msgid "Filename"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:153
+msgid "Error Message"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:156
+msgid "Cancel selected"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:158
+msgid "Show error message"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:197
+#: src/slic3r/GUI/PrintHostDialogs.cpp:228
+msgid "Enqueued"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:229
+msgid "Uploading"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:233
+msgid "Completed"
+msgstr ""
+
+#: src/slic3r/GUI/PrintHostDialogs.cpp:271
+msgid "Error uploading to print host:"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:23
+msgid "NO RAMMING AT ALL"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:76
+msgid "Time"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:76 src/slic3r/GUI/WipeTowerDialog.cpp:82
+#: src/libslic3r/PrintConfig.cpp:613 src/libslic3r/PrintConfig.cpp:657
+#: src/libslic3r/PrintConfig.cpp:672 src/libslic3r/PrintConfig.cpp:2268
+#: src/libslic3r/PrintConfig.cpp:2277 src/libslic3r/PrintConfig.cpp:2337
+#: src/libslic3r/PrintConfig.cpp:2344
+msgid "s"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:81
+msgid "Volumetric speed"
+msgstr ""
+
+#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:570
+#: src/libslic3r/PrintConfig.cpp:1210
+msgid "mm³/s"
+msgstr ""
+
+#: src/slic3r/GUI/SysInfoDialog.cpp:44
+msgid "System Information"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:52 src/libslic3r/PrintConfig.cpp:230
+msgid "Compatible printers"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:53
+msgid "Select the printers this profile is compatible with."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:58 src/libslic3r/PrintConfig.cpp:245
+msgid "Compatible print profiles"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:59
+msgid "Select the print profiles this profile is compatible with."
+msgstr ""
+
+#. TRN "Save current Settings"
+#: src/slic3r/GUI/Tab.cpp:133
+#, possible-c-format
+msgid "Save current %s"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:134
+msgid "Delete this preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:139
+msgid ""
+"Hover the cursor over buttons to find more information \n"
+"or click this button."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:918
+msgid "It's a default preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:919
+msgid "It's a system preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:920
+#, possible-c-format
+msgid "Current preset is inherited from %s"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:921
+msgid "default preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:925
+msgid "It can't be deleted or modified."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:926
+msgid ""
+"Any modifications should be saved as a new preset inherited from this one."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:927
+msgid "To do that please specify a new name for the preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:931
+msgid "Additional information:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:937
+msgid "printer model"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:945
+msgid "default print profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:948
+msgid "default filament profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:962
+msgid "default SLA material profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:966
+msgid "default SLA print profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1001 src/slic3r/GUI/Tab.cpp:3417
+msgid "Layers and perimeters"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1002 src/libslic3r/PrintConfig.cpp:56
+msgid "Layer height"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1006
+msgid "Vertical shells"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1017
+msgid "Horizontal shells"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1018 src/libslic3r/PrintConfig.cpp:1735
+msgid "Solid layers"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1023
+msgid "Quality (slower slicing)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1041
+msgid "Reducing printing time"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1053
+msgid "Skirt and brim"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1070
+msgid "Raft"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1074
+msgid "Options for support material and raft"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1089
+msgid "Speed for print moves"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1101
+msgid "Speed for non-print moves"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1104
+msgid "Modifiers"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1107
+msgid "Acceleration control (advanced)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1114
+msgid "Autospeed (advanced)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1122
+msgid "Multiple Extruders"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1130
+msgid "Ooze prevention"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1147
+msgid "Extrusion width"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1157
+msgid "Overlap"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1160
+msgid "Flow"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1169
+msgid "Other"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1172 src/slic3r/GUI/Tab.cpp:3465
+msgid "Output options"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1173
+msgid "Sequential printing"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1175
+msgid "Extruder clearance (mm)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1184 src/slic3r/GUI/Tab.cpp:3466
+msgid "Output file"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1191 src/libslic3r/PrintConfig.cpp:1408
+msgid "Post-processing scripts"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1197 src/slic3r/GUI/Tab.cpp:1198
+#: src/slic3r/GUI/Tab.cpp:1581 src/slic3r/GUI/Tab.cpp:1582
+#: src/slic3r/GUI/Tab.cpp:1991 src/slic3r/GUI/Tab.cpp:1992
+#: src/slic3r/GUI/Tab.cpp:2085 src/slic3r/GUI/Tab.cpp:2086
+#: src/slic3r/GUI/Tab.cpp:3354 src/slic3r/GUI/Tab.cpp:3355
+msgid "Notes"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1204 src/slic3r/GUI/Tab.cpp:1589
+#: src/slic3r/GUI/Tab.cpp:1998 src/slic3r/GUI/Tab.cpp:2092
+#: src/slic3r/GUI/Tab.cpp:3362 src/slic3r/GUI/Tab.cpp:3471
+msgid "Dependencies"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1205 src/slic3r/GUI/Tab.cpp:1590
+#: src/slic3r/GUI/Tab.cpp:1999 src/slic3r/GUI/Tab.cpp:2093
+#: src/slic3r/GUI/Tab.cpp:3363 src/slic3r/GUI/Tab.cpp:3472
+msgid "Profile dependencies"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1251
+#, possible-c-format
+msgid ""
+"The Spiral Vase mode requires:\n"
+"- one perimeter\n"
+"- no top solid layers\n"
+"- 0% fill density\n"
+"- no support material\n"
+"- no ensure_vertical_shell_thickness\n"
+"\n"
+"Shall I adjust those settings in order to enable Spiral Vase?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1258
+msgid "Spiral Vase"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1281
+msgid ""
+"The Wipe Tower currently supports the non-soluble supports only\n"
+"if they are printed with the current extruder without triggering a tool "
+"change.\n"
+"(both support_material_extruder and support_material_interface_extruder need "
+"to be set to 0).\n"
+"\n"
+"Shall I adjust those settings in order to enable the Wipe Tower?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1285 src/slic3r/GUI/Tab.cpp:1302
+msgid "Wipe Tower"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1299
+msgid ""
+"For the Wipe Tower to work with the soluble supports, the support layers\n"
+"need to be synchronized with the object layers.\n"
+"\n"
+"Shall I synchronize support layers in order to enable the Wipe Tower?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1317
+msgid ""
+"Supports work better, if the following feature is enabled:\n"
+"- Detect bridging perimeters\n"
+"\n"
+"Shall I adjust those settings for supports?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1320
+msgid "Support Generator"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1362
+msgid ""
+"The %1% infill pattern is not supposed to work at 100%% density.\n"
+"\n"
+"Shall I switch to rectilinear fill pattern?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1483 src/libslic3r/PrintConfig.cpp:2005
+msgid "Temperature"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1489
+msgid "Bed"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1494
+msgid "Cooling"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1495 src/libslic3r/PrintConfig.cpp:1311
+#: src/libslic3r/PrintConfig.cpp:2124
+msgid "Enable"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1506
+msgid "Fan settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1507
+msgid "Fan speed"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1515
+msgid "Cooling thresholds"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1521
+msgid "Filament properties"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1525
+msgid "Print speed override"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1535
+msgid "Toolchange parameters with single extruder MM printers"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1550
+msgid "Ramming settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1568 src/slic3r/GUI/Tab.cpp:1954
+msgid "Custom G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1569 src/slic3r/GUI/Tab.cpp:1955
+#: src/libslic3r/PrintConfig.cpp:1761 src/libslic3r/PrintConfig.cpp:1776
+msgid "Start G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1575 src/slic3r/GUI/Tab.cpp:1961
+#: src/libslic3r/PrintConfig.cpp:360 src/libslic3r/PrintConfig.cpp:370
+msgid "End G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1706 src/slic3r/GUI/Tab.cpp:1894
+msgid "Test"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1716
+msgid "Could not get a valid Printer Host reference"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1722 src/slic3r/GUI/Tab.cpp:1907
+msgid "Success!"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1737
+msgid ""
+"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
+"signed certificate."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1750
+msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1751
+msgid "Open CA certificate file"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1779
+#, possible-c-format
+msgid ""
+"HTTPS CA File:\n"
+"    \tOn this system, %s uses HTTPS certificates from the system Certificate "
+"Store or Keychain.\n"
+"    \tTo use a custom CA file, please import your CA file into Certificate "
+"Store / Keychain."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1819 src/slic3r/GUI/Tab.cpp:2020
+msgid "Size and coordinates"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1824 src/slic3r/GUI/Tab.cpp:2025
+#: src/slic3r/GUI/Tab.cpp:3009
+msgid "Set"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1846
+msgid "Capabilities"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1851
+msgid "Number of extruders of the printer."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1879
+msgid "USB/Serial connection"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1880 src/libslic3r/PrintConfig.cpp:1616
+msgid "Serial port"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1885
+msgid "Rescan serial ports"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1907
+msgid "Connection to printer works correctly."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1910
+msgid "Connection failed."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1923 src/slic3r/GUI/Tab.cpp:2080
+msgid "Print Host upload"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1967 src/libslic3r/PrintConfig.cpp:129
+msgid "Before layer change G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1973 src/libslic3r/PrintConfig.cpp:1032
+msgid "After layer change G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1979 src/libslic3r/PrintConfig.cpp:2031
+msgid "Tool change G-code"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:1985
+msgid "Between objects G-code (for sequential printing)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2047
+msgid "Display"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2058
+msgid "Tilt"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2059
+msgid "Tilt time"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2065 src/slic3r/GUI/Tab.cpp:3336
+msgid "Corrections"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2142 src/slic3r/GUI/Tab.cpp:2215
+#: src/libslic3r/PrintConfig.cpp:1082 src/libslic3r/PrintConfig.cpp:1100
+#: src/libslic3r/PrintConfig.cpp:1118 src/libslic3r/PrintConfig.cpp:1135
+#: src/libslic3r/PrintConfig.cpp:1146 src/libslic3r/PrintConfig.cpp:1157
+#: src/libslic3r/PrintConfig.cpp:1168
+msgid "Machine limits"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2156
+msgid "Values in this column are for Normal mode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2157
+msgid "Normal"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2162
+msgid "Values in this column are for Stealth mode"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2163
+msgid "Stealth"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2171
+msgid "Maximum feedrates"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2176
+msgid "Maximum accelerations"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2183
+msgid "Jerk limits"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2188
+msgid "Minimum feedrates"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2237 src/slic3r/GUI/Tab.cpp:2245
+msgid "Single extruder MM setup"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2246
+msgid "Single extruder multimaterial parameters"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2259 src/libslic3r/GCode/PreviewData.cpp:475
+#, possible-c-format
+msgid "Extruder %d"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2266
+msgid "Layer height limits"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2271
+msgid "Position (for multi-extruder printers)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2274
+msgid "Retraction"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2277
+msgid "Only lift Z"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2290
+msgid ""
+"Retraction when tool is disabled (advanced settings for multi-extruder "
+"setups)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2449
+msgid ""
+"The Wipe option is not available when using the Firmware Retraction mode.\n"
+"\n"
+"Shall I disable it in order to enable Firmware Retraction?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2451
+msgid "Firmware Retraction"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2777
+#, possible-c-format
+msgid "Default preset (%s)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2778
+#, possible-c-format
+msgid "Preset (%s)"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2795
+msgid "has the following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2798
+msgid "is not compatible with printer"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2799
+msgid "is not compatible with print profile"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2801
+msgid "and it has the following unsaved changes:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2805
+msgid "Unsaved Changes"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2817
+msgid "Please check your object list before preset changing."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2896
+msgid "%1% - Copy"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2919
+msgid "The supplied name is empty. It can't be saved."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2924
+msgid "Cannot overwrite a system profile."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2928
+msgid "Cannot overwrite an external profile."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2954
+msgid "remove"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2954
+msgid "delete"
+msgstr ""
+
+#. TRN  remove/delete
+#: src/slic3r/GUI/Tab.cpp:2956
+msgid "Are you sure you want to %1% the selected preset?"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:2957
+msgid "Remove"
+msgstr ""
+
+#. TRN  Remove/Delete
+#: src/slic3r/GUI/Tab.cpp:2959
+msgid "%1% Preset"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3085
+msgid "LOCKED LOCK"
+msgstr ""
+
+#. TRN Description for "LOCKED LOCK"
+#: src/slic3r/GUI/Tab.cpp:3087
+msgid ""
+"indicates that the settings are the same as the system values for the "
+"current option group"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3089
+msgid "UNLOCKED LOCK"
+msgstr ""
+
+#. TRN Description for "UNLOCKED LOCK"
+#: src/slic3r/GUI/Tab.cpp:3091
+msgid ""
+"indicates that some settings were changed and are not equal to the system "
+"values for the current option group.\n"
+"Click the UNLOCKED LOCK icon to reset all settings for current option group "
+"to the system values."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3096
+msgid "WHITE BULLET"
+msgstr ""
+
+#. TRN Description for "WHITE BULLET"
+#: src/slic3r/GUI/Tab.cpp:3098
+msgid ""
+"for the left button: \tindicates a non-system preset,\n"
+"for the right button: \tindicates that the settings hasn't been modified."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3101
+msgid "BACK ARROW"
+msgstr ""
+
+#. TRN Description for "BACK ARROW"
+#: src/slic3r/GUI/Tab.cpp:3103
+msgid ""
+"indicates that the settings were changed and are not equal to the last saved "
+"preset for the current option group.\n"
+"Click the BACK ARROW icon to reset all settings for the current option group "
+"to the last saved preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3128
+msgid ""
+"LOCKED LOCK icon indicates that the settings are the same as the system "
+"values for the current option group"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3130
+msgid ""
+"UNLOCKED LOCK icon indicates that some settings were changed and are not "
+"equal to the system values for the current option group.\n"
+"Click to reset all settings for current option group to the system values."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3133
+msgid "WHITE BULLET icon indicates a non system preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3136
+msgid ""
+"WHITE BULLET icon indicates that the settings are the same as in the last "
+"saved preset for the current option group."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3138
+msgid ""
+"BACK ARROW icon indicates that the settings were changed and are not equal "
+"to the last saved preset for the current option group.\n"
+"Click to reset all settings for the current option group to the last saved "
+"preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3144
+msgid ""
+"LOCKED LOCK icon indicates that the value is the same as the system value."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3145
+msgid ""
+"UNLOCKED LOCK icon indicates that the value was changed and is not equal to "
+"the system value.\n"
+"Click to reset current value to the system value."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3151
+msgid ""
+"WHITE BULLET icon indicates that the value is the same as in the last saved "
+"preset."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3152
+msgid ""
+"BACK ARROW icon indicates that the value was changed and is not equal to the "
+"last saved preset.\n"
+"Click to reset current value to the last saved preset."
+msgstr ""
+
+#. TRN Preset
+#: src/slic3r/GUI/Tab.cpp:3265
+#, possible-c-format
+msgid "Save %s as:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3309
+msgid "the following postfix are not allowed:"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3313
+msgid "The supplied name is not available."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3326
+msgid "Material"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3328 src/slic3r/GUI/Tab.cpp:3419
+msgid "Layers"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3332
+msgid "Exposure"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3427
+msgid "Support head"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3432
+msgid "Support pillar"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3442
+msgid "Connection of the support sticks and junctions"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3447
+msgid "Automatic generation"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3509
+msgid "Head penetration should not be greater than the head width."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3510
+msgid "Invalid Head penetration"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3522
+msgid "Pinhead diameter should be smaller than the pillar diameter."
+msgstr ""
+
+#: src/slic3r/GUI/Tab.cpp:3523
+msgid "Invalid pinhead diameter"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:318 src/slic3r/GUI/Tab.hpp:411
+msgid "Print Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:337
+msgid "Filament Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:372
+msgid "Printer Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:396
+msgid "Material Settings"
+msgstr ""
+
+#: src/slic3r/GUI/Tab.hpp:423
+msgid "Save preset"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:30
+msgid "Update available"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:30
+#, possible-c-format
+msgid "New version of %s is available"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:37
+msgid "To download, follow the link below."
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:45
+msgid "Current version:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:47
+msgid "New version:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:55
+msgid "Don't notify about new releases any more"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:73 src/slic3r/GUI/UpdateDialogs.cpp:168
+msgid "Configuration update"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:73
+msgid "Configuration update is available"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:76
+msgid ""
+"Would you like to install it?\n"
+"\n"
+"Note that a full configuration snapshot will be created first. It can then "
+"be restored at any time should there be a problem with the new version.\n"
+"\n"
+"Updated configuration bundles:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:112
+#, possible-c-format
+msgid "%s incompatibility"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:113
+#, possible-c-format
+msgid "%s configuration is incompatible"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:118
+#, possible-c-format
+msgid ""
+"This version of %s is not compatible with currently installed configuration "
+"bundles.\n"
+"This probably happened as a result of running an older %s after using a "
+"newer one.\n"
+"\n"
+"You may either exit %s and try again with a newer version, or you may re-run "
+"the initial configuration. Doing so will create a backup snapshot of the "
+"existing configuration before installing files compatible with this %s.\n"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:127
+#, possible-c-format
+msgid "This %s version: %s"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:132
+msgid "Incompatible bundles:"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:148
+#, possible-c-format
+msgid "Exit %s"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:151
+msgid "Re-configure"
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:172
+#, possible-c-format
+msgid ""
+"%s now uses an updated configuration structure.\n"
+"\n"
+"So called 'System presets' have been introduced, which hold the built-in "
+"default settings for various printers. These System presets cannot be "
+"modified, instead, users now may create their own presets inheriting "
+"settings from one of the System presets.\n"
+"An inheriting preset may either inherit a particular value from its parent "
+"or override it with a customized value.\n"
+"\n"
+"Please proceed with the %s that follows to set up the new presets and to "
+"choose whether to enable automatic preset updates."
+msgstr ""
+
+#: src/slic3r/GUI/UpdateDialogs.cpp:188
+msgid "For more information please visit our wiki page:"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:14
+msgid "Ramming customization"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:40
+msgid ""
+"Ramming denotes the rapid extrusion just before a tool change in a single-"
+"extruder MM printer. Its purpose is to properly shape the end of the "
+"unloaded filament so it does not prevent insertion of the new filament and "
+"can itself be reinserted later. This phase is important and different "
+"materials can require different extrusion speeds to get the good shape. For "
+"this reason, the extrusion rates during ramming are adjustable.\n"
+"\n"
+"This is an expert-level setting, incorrect adjustment will likely lead to "
+"jams, extruder wheel grinding into filament etc."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:82
+msgid "Total ramming time"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:84
+msgid "Total rammed volume"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:88
+msgid "Ramming line width"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:90
+msgid "Ramming line spacing"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:141
+msgid "Wipe tower - Purging volume adjustment"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:225
+msgid ""
+"Here you can adjust required purging volume (mm³) for any given pair of "
+"tools."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:226
+msgid "Extruder changed to"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:234
+msgid "unloaded"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:235
+msgid "loaded"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:240
+msgid "Tool #"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:247
+msgid ""
+"Total purging volume is calculated by summing two values below, depending on "
+"which tools are loaded/unloaded."
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:248
+msgid "Volume to purge (mm³) when the filament is being"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:262
+msgid "From"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:327
+msgid ""
+"Switching to simple settings will discard changes done in the advanced "
+"mode!\n"
+"\n"
+"Do you want to proceed?"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:339
+msgid "Show simplified settings"
+msgstr ""
+
+#: src/slic3r/GUI/WipeTowerDialog.cpp:339
+msgid "Show advanced settings"
+msgstr ""
+
+#: src/slic3r/GUI/wxExtensions.cpp:400
+msgid "Instances"
+msgstr ""
+
+#: src/slic3r/GUI/wxExtensions.cpp:407 src/slic3r/GUI/wxExtensions.cpp:474
+#, possible-c-format
+msgid "Instance %d"
+msgstr ""
+
+#: src/slic3r/GUI/wxExtensions.cpp:2462
+#, possible-c-format
+msgid "Switch to the %s mode"
+msgstr ""
+
+#: src/slic3r/GUI/wxExtensions.cpp:2463
+#, possible-c-format
+msgid "Current mode is %s"
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:51
+msgid "Connection to Duet works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:56
+msgid "Could not connect to Duet"
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:84 src/slic3r/Utils/Duet.cpp:154
+msgid "Unknown error occured"
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:148
+msgid "Wrong password"
+msgstr ""
+
+#: src/slic3r/Utils/Duet.cpp:151
+msgid "Could not get resources to create a new connection"
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:69
+#, possible-c-format
+msgid "Mismatched type of print host: %s"
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:84
+msgid "Connection to OctoPrint works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:90
+msgid "Could not connect to OctoPrint"
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:90
+msgid "Note: OctoPrint version at least 1.1.0 is required."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:195
+msgid "Connection to Prusa SL1 works correctly."
+msgstr ""
+
+#: src/slic3r/Utils/OctoPrint.cpp:200
+msgid "Could not connect to Prusa SLA"
+msgstr ""
+
+#: src/slic3r/Utils/PresetUpdater.cpp:583
+#, possible-c-format
+msgid "requires min. %s and max. %s"
+msgstr ""
+
+#: src/slic3r/Utils/PresetUpdater.cpp:588
+#, possible-c-format
+msgid "requires min. %s"
+msgstr ""
+
+#: src/slic3r/Utils/PresetUpdater.cpp:590
+#, possible-c-format
+msgid "requires max. %s"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:219
+#: src/slic3r/Utils/FixModelByWin10.cpp:359
+msgid "Exporting source model"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:235
+msgid "Failed loading the input model."
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:242
+msgid "Repairing model by the Netfabb service"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:248
+msgid "Mesh repair failed."
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:251
+#: src/slic3r/Utils/FixModelByWin10.cpp:378
+msgid "Loading repaired model"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:263
+#: src/slic3r/Utils/FixModelByWin10.cpp:270
+#: src/slic3r/Utils/FixModelByWin10.cpp:302
+msgid "Saving mesh into the 3MF container failed."
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:340
+msgid "Model fixing"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:341
+msgid "Exporting model..."
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:368
+msgid "Export of a temporary 3mf file failed"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:383
+msgid "Import of the repaired 3mf file failed"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:385
+msgid "Repaired 3MF file does not contain any object"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:387
+msgid "Repaired 3MF file contains more than one object"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:389
+msgid "Repaired 3MF file does not contain any volume"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:391
+msgid "Repaired 3MF file contains more than one volume"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:400
+msgid "Model repair finished"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:406
+msgid "Model repair canceled"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:423
+msgid "Model repaired successfully"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:423
+#: src/slic3r/Utils/FixModelByWin10.cpp:426
+msgid "Model Repair by the Netfabb service"
+msgstr ""
+
+#: src/slic3r/Utils/FixModelByWin10.cpp:426
+msgid "Model repair failed: \n"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:35
+msgid "undefined error"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:37
+msgid "too many files"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:39
+msgid "file too large"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:41
+msgid "unsupported method"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:43
+msgid "unsupported encryption"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:45
+msgid "unsupported feature"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:47
+msgid "failed finding central directory"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:49
+msgid "not a ZIP archive"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:51
+msgid "invalid header or archive is corrupted"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:53
+msgid "unsupported multidisk archive"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:55
+msgid "decompression failed or archive is corrupted"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:57
+msgid "compression failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:59
+msgid "unexpected decompressed size"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:61
+msgid "CRC-32 check failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:63
+msgid "unsupported central directory size"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:65
+msgid "allocation failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:67
+msgid "file open failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:69
+msgid "file create failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:71
+msgid "file write failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:73
+msgid "file read failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:75
+msgid "file close failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:77
+msgid "file seek failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:79
+msgid "file stat failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:81
+msgid "invalid parameter"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:83
+msgid "invalid filename"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:85
+msgid "buffer too small"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:87
+msgid "internal error"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:89
+msgid "file not found"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:91
+msgid "archive is too large"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:93
+msgid "validation failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:95
+msgid "write calledback failed"
+msgstr ""
+
+#: src/libslic3r/Zipper.cpp:105
+msgid "Error with zip archive"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1135
+msgid "All objects are outside of the print volume."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1162
+msgid "Some objects are too close; your extruder will collide with them."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1177
+msgid ""
+"Some objects are too tall and cannot be printed without extruder collisions."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1187
+msgid "The Spiral Vase option can only be used when printing a single object."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1189
+msgid ""
+"The Spiral Vase option can only be used when printing single material "
+"objects."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1195
+msgid ""
+"All extruders must have the same diameter for single extruder multimaterial "
+"printer."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1200
+msgid ""
+"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
+"and Repetier G-code flavors."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1202
+msgid ""
+"The Wipe Tower is currently only supported with the relative extruder "
+"addressing (use_relative_e_distances=1)."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1223
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they have equal "
+"layer heights"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1225
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"over an equal number of raft layers"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1227
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are printed "
+"with the same support_material_contact_distance"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1229
+msgid ""
+"The Wipe Tower is only supported for multiple objects if they are sliced "
+"equally."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1258
+msgid ""
+"The Wipe tower is only supported if all objects have the same layer height "
+"profile"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1268
+msgid "The supplied settings will cause an empty print."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1285
+msgid ""
+"One or more object were assigned an extruder that the printer does not have."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1294
+msgid ""
+"Printing with multiple extruders of differing nozzle diameters. If support "
+"is to be printed with the current extruder (support_material_extruder == 0 "
+"or support_material_interface_extruder == 0), all nozzles have to be of the "
+"same diameter."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1302
+msgid ""
+"For the Wipe Tower to work with the soluble supports, the support layers "
+"need to be synchronized with the object layers."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1306
+msgid ""
+"The Wipe Tower currently supports the non-soluble supports only if they are "
+"printed with the current extruder without triggering a tool change. (both "
+"support_material_extruder and support_material_interface_extruder need to be "
+"set to 0)."
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1313
+msgid "first_layer_height"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1328
+msgid "First layer height can't be greater than nozzle diameter"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1332
+msgid "Layer height can't be greater than nozzle diameter"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1476
+msgid "Infilling layers"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1484
+msgid "Generating skirt"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1492
+msgid "Generating brim"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1520
+msgid "Exporting G-code"
+msgstr ""
+
+#: src/libslic3r/Print.cpp:1524
+msgid "Generating G-code"
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:57
+msgid "Slicing model"
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:58 src/libslic3r/SLAPrint.cpp:819
+msgid "Generating support points"
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:59
+msgid "Generating support tree"
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:60
+msgid "Generating pad"
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:61
+msgid "Slicing supports"
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:78
+msgid "Merging slices and calculating statistics"
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:79
+msgid "Rasterizing layers"
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:622
+msgid ""
+"Cannot proceed without support points! Add support points or disable support "
+"generation."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:634
+msgid "Elevation is too low for object."
+msgstr ""
+
+#. TRN To be shown at the status bar on SLA slicing error.
+#: src/libslic3r/SLAPrint.cpp:719
+msgid "Slicing had to be stopped due to an internal error."
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:867 src/libslic3r/SLAPrint.cpp:877
+#: src/libslic3r/SLAPrint.cpp:925
+msgid "Visualizing supports"
+msgstr ""
+
+#: src/libslic3r/SLAPrint.cpp:1463
+msgid "Slicing done"
+msgstr ""
+
+#: src/libslic3r/PrintBase.cpp:65
+msgid "Failed processing of the output_filename_format template."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:43 src/libslic3r/PrintConfig.cpp:44
+msgid "Printer technology"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:51
+msgid "Bed shape"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:58
+msgid ""
+"This setting controls the height (and thus the total number) of the slices/"
+"layers. Thinner layers give better accuracy but take more time to print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:65
+msgid "Max print height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:66
+msgid ""
+"Set this to the maximum height that can be reached by your extruder while "
+"printing."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:72
+msgid "Slice gap closing radius"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:74
+msgid ""
+"Cracks smaller than 2x gap closing radius are being filled during the "
+"triangle mesh slicing. The gap closing operation may reduce the final print "
+"resolution, therefore it is advisable to keep the value reasonably low."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:82
+msgid "Hostname, IP or URL"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:83
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the hostname, IP address or URL of the printer host instance."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:89
+msgid "API Key / Password"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:90
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field should contain "
+"the API Key or the password required for authentication."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:96
+msgid "HTTPS CA File"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:97
+msgid ""
+"Custom CA certificate file can be specified for HTTPS OctoPrint connections, "
+"in crt/pem format. If left blank, the default OS CA certificate repository "
+"is used."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:112
+msgid "Avoid crossing perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:113
+msgid ""
+"Optimize travel moves in order to minimize the crossing of perimeters. This "
+"is mostly useful with Bowden extruders which suffer from oozing. This "
+"feature slows down both the print and the G-code generation."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:120 src/libslic3r/PrintConfig.cpp:2002
+msgid "Other layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:121
+msgid ""
+"Bed temperature for layers after the first one. Set this to zero to disable "
+"bed temperature control commands in the output."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:123
+msgid "Bed temperature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:130
+msgid ""
+"This custom code is inserted at every layer change, right before the Z move. "
+"Note that you can use placeholder variables for all Slic3r settings as well "
+"as [layer_num] and [layer_z]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:140
+msgid "Between objects G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:141
+msgid ""
+"This code is inserted between objects when using sequential printing. By "
+"default extruder and bed temperature are reset using non-wait command; "
+"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
+"will not add temperature commands. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:152
+msgid "Number of solid layers to generate on bottom surfaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:153
+msgid "Bottom solid layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:158
+msgid "Bridge"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:159
+msgid ""
+"This is the acceleration your printer will use for bridges. Set zero to "
+"disable acceleration control for bridges."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:161 src/libslic3r/PrintConfig.cpp:304
+#: src/libslic3r/PrintConfig.cpp:816 src/libslic3r/PrintConfig.cpp:937
+#: src/libslic3r/PrintConfig.cpp:1106 src/libslic3r/PrintConfig.cpp:1159
+#: src/libslic3r/PrintConfig.cpp:1170 src/libslic3r/PrintConfig.cpp:1359
+msgid "mm/s²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:167
+msgid "Bridging angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:169
+msgid ""
+"Bridging angle override. If left to zero, the bridging angle will be "
+"calculated automatically. Otherwise the provided angle will be used for all "
+"bridges. Use 180° for zero angle."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:172 src/libslic3r/PrintConfig.cpp:734
+#: src/libslic3r/PrintConfig.cpp:1595 src/libslic3r/PrintConfig.cpp:1605
+#: src/libslic3r/PrintConfig.cpp:1833 src/libslic3r/PrintConfig.cpp:1987
+#: src/libslic3r/PrintConfig.cpp:2171 src/libslic3r/PrintConfig.cpp:2488
+#: src/libslic3r/PrintConfig.cpp:2597
+msgid "°"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:178
+msgid "Bridges fan speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:179
+msgid "This fan speed is enforced during all bridges and overhangs."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:180 src/libslic3r/PrintConfig.cpp:746
+#: src/libslic3r/PrintConfig.cpp:1179 src/libslic3r/PrintConfig.cpp:1242
+#: src/libslic3r/PrintConfig.cpp:1487 src/libslic3r/PrintConfig.cpp:2285
+#: src/libslic3r/PrintConfig.cpp:2527
+msgid "%"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:187
+msgid "Bridge flow ratio"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:189
+msgid ""
+"This factor affects the amount of plastic for bridging. You can decrease it "
+"slightly to pull the extrudates and prevent sagging, although default "
+"settings are usually good and you should experiment with cooling (use a fan) "
+"before tweaking this."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:199
+msgid "Bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:201
+msgid "Speed for printing bridges."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:202 src/libslic3r/PrintConfig.cpp:578
+#: src/libslic3r/PrintConfig.cpp:586 src/libslic3r/PrintConfig.cpp:595
+#: src/libslic3r/PrintConfig.cpp:603 src/libslic3r/PrintConfig.cpp:630
+#: src/libslic3r/PrintConfig.cpp:649 src/libslic3r/PrintConfig.cpp:875
+#: src/libslic3r/PrintConfig.cpp:1002 src/libslic3r/PrintConfig.cpp:1088
+#: src/libslic3r/PrintConfig.cpp:1124 src/libslic3r/PrintConfig.cpp:1137
+#: src/libslic3r/PrintConfig.cpp:1148 src/libslic3r/PrintConfig.cpp:1201
+#: src/libslic3r/PrintConfig.cpp:1260 src/libslic3r/PrintConfig.cpp:1388
+#: src/libslic3r/PrintConfig.cpp:1562 src/libslic3r/PrintConfig.cpp:1571
+#: src/libslic3r/PrintConfig.cpp:1966 src/libslic3r/PrintConfig.cpp:2078
+msgid "mm/s"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:209
+msgid "Brim width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:210
+msgid ""
+"Horizontal width of the brim that will be printed around each object on the "
+"first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:217
+msgid "Clip multi-part objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:218
+msgid ""
+"When printing multi-material objects, this settings will make Slic3r to clip "
+"the overlapping object parts one by the other (2nd part will be clipped by "
+"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:225
+msgid "Colorprint height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:226
+msgid "Heights at which a filament change is to occur."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:236
+msgid "Compatible printers condition"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:237
+msgid ""
+"A boolean expression using the configuration values of an active printer "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active printer profile."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:251
+msgid "Compatible print profiles condition"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:252
+msgid ""
+"A boolean expression using the configuration values of an active print "
+"profile. If this expression evaluates to true, this profile is considered "
+"compatible with the active print profile."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:269
+msgid "Complete individual objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:270
+msgid ""
+"When printing multiple objects or copies, this feature will complete each "
+"object before moving onto next one (and starting it from its bottom layer). "
+"This feature is useful to avoid the risk of ruined prints. Slic3r should "
+"warn and prevent you from extruder collisions, but beware."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:278
+msgid "Enable auto cooling"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:279
+msgid ""
+"This flag enables the automatic cooling logic that adjusts print speed and "
+"fan speed according to layer printing time."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:284
+msgid "Cooling tube position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:285
+msgid "Distance of the center-point of the cooling tube from the extruder tip."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:292
+msgid "Cooling tube length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:293
+msgid "Length of the cooling tube to limit space for cooling moves inside it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:301
+msgid ""
+"This is the acceleration your printer will be reset to after the role-"
+"specific acceleration values are used (perimeter/infill). Set zero to "
+"prevent resetting acceleration at all."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:310
+msgid "Default filament profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:311
+msgid ""
+"Default filament profile associated with the current printer profile. On "
+"selection of the current printer profile, this filament profile will be "
+"activated."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:317
+msgid "Default print profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:318 src/libslic3r/PrintConfig.cpp:2366
+#: src/libslic3r/PrintConfig.cpp:2377
+msgid ""
+"Default print profile associated with the current printer profile. On "
+"selection of the current printer profile, this print profile will be "
+"activated."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:324
+msgid "Disable fan for the first"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:325
+msgid ""
+"You can set this to a positive value to disable fan at all during the first "
+"layers, so that it does not make adhesion worse."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:327 src/libslic3r/PrintConfig.cpp:947
+#: src/libslic3r/PrintConfig.cpp:1460 src/libslic3r/PrintConfig.cpp:1645
+#: src/libslic3r/PrintConfig.cpp:1706 src/libslic3r/PrintConfig.cpp:1869
+#: src/libslic3r/PrintConfig.cpp:1914
+msgid "layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:334
+msgid "Don't support bridges"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:336
+msgid ""
+"Experimental option for preventing support material from being generated "
+"under bridged areas."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:342
+msgid "Distance between copies"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:343
+msgid "Distance used for the auto-arrange feature of the plater."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:350
+msgid "Elephant foot compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:352
+msgid ""
+"The first layer will be shrunk in the XY plane by the configured value to "
+"compensate for the 1st layer squish aka an Elephant Foot effect."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:361
+msgid ""
+"This end procedure is inserted at the end of the output file. Note that you "
+"can use placeholder variables for all Slic3r settings."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:371
+msgid ""
+"This end procedure is inserted at the end of the output file, before the "
+"printer end gcode. Note that you can use placeholder variables for all "
+"Slic3r settings. If you have multiple extruders, the gcode is processed in "
+"extruder order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:381
+msgid "Ensure vertical shell thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:383
+msgid ""
+"Add solid infill near sloping surfaces to guarantee the vertical shell "
+"thickness (top+bottom solid layers)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:389
+msgid "Top fill pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:391
+msgid ""
+"Fill pattern for top infill. This only affects the top visible layer, and "
+"not its adjacent solid shells."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:399 src/libslic3r/PrintConfig.cpp:797
+#: src/libslic3r/PrintConfig.cpp:1947
+msgid "Rectilinear"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:400 src/libslic3r/PrintConfig.cpp:803
+msgid "Concentric"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:401 src/libslic3r/PrintConfig.cpp:807
+msgid "Hilbert Curve"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:402 src/libslic3r/PrintConfig.cpp:808
+msgid "Archimedean Chords"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:403 src/libslic3r/PrintConfig.cpp:809
+msgid "Octagram Spiral"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:410
+msgid "Bottom fill pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:411
+msgid ""
+"Fill pattern for bottom infill. This only affects the bottom external "
+"visible layer, and not its adjacent solid shells."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:416 src/libslic3r/PrintConfig.cpp:426
+msgid "External perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:418
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for external "
+"perimeters. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 200%), it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:421 src/libslic3r/PrintConfig.cpp:836
+#: src/libslic3r/PrintConfig.cpp:968 src/libslic3r/PrintConfig.cpp:1379
+#: src/libslic3r/PrintConfig.cpp:1717 src/libslic3r/PrintConfig.cpp:1890
+#: src/libslic3r/PrintConfig.cpp:2048
+msgid "mm or % (leave 0 for default)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:428
+msgid ""
+"This separate setting will affect the speed of external perimeters (the "
+"visible ones). If expressed as percentage (for example: 80%) it will be "
+"calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:431 src/libslic3r/PrintConfig.cpp:857
+#: src/libslic3r/PrintConfig.cpp:1676 src/libslic3r/PrintConfig.cpp:1727
+#: src/libslic3r/PrintConfig.cpp:1933 src/libslic3r/PrintConfig.cpp:2060
+msgid "mm/s or %"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:438
+msgid "External perimeters first"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:440
+msgid ""
+"Print contour perimeters from the outermost one to the innermost one instead "
+"of the default inverse order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:446
+msgid "Extra perimeters if needed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:448
+#, possible-c-format
+msgid ""
+"Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
+"keeps adding perimeters, until more than 70% of the loop immediately above "
+"is supported."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:458
+msgid ""
+"The extruder to use (unless more specific extruder settings are specified). "
+"This value overrides perimeter and infill extruders, but not the support "
+"extruders."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:470
+msgid ""
+"Set this to the vertical distance between your nozzle tip and (usually) the "
+"X carriage rods. In other words, this is the height of the clearance "
+"cylinder around your extruder, and it represents the maximum depth the "
+"extruder can peek before colliding with other printed objects."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:480
+msgid "Radius"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:481
+msgid ""
+"Set this to the clearance radius around your extruder. If the extruder is "
+"not centered, choose the largest value for safety. This setting is used to "
+"check for collisions and to display the graphical preview in the plater."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:491
+msgid "Extruder Color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:492 src/libslic3r/PrintConfig.cpp:552
+msgid "This is only used in the Slic3r interface as a visual help."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:498
+msgid "Extruder offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:499
+msgid ""
+"If your firmware doesn't handle the extruder displacement you need the G-"
+"code to take it into account. This option lets you specify the displacement "
+"of each extruder with respect to the first one. It expects positive "
+"coordinates (they will be subtracted from the XY coordinate)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:508
+msgid "Extrusion axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:509
+msgid ""
+"Use this option to set the axis letter associated to your printer's extruder "
+"(usually E but some printers use A)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:514
+msgid "Extrusion multiplier"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:515
+msgid ""
+"This factor changes the amount of flow proportionally. You may need to tweak "
+"this setting to get nice surface finish and correct single wall widths. "
+"Usual values are between 0.9 and 1.1. If you think you need to change this "
+"more, check filament diameter and your firmware E steps."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:523
+msgid "Default extrusion width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:525
+msgid ""
+"Set this to a non-zero value to allow a manual extrusion width. If left to "
+"zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
+"tooltips for perimeter extrusion width, infill extrusion width etc). If "
+"expressed as percentage (for example: 230%), it will be computed over layer "
+"height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:529
+msgid "mm or % (leave 0 for auto)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:534
+msgid "Keep fan always on"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:535
+msgid ""
+"If this is enabled, fan will never be disabled and will be kept running at "
+"least at its minimum speed. Useful for PLA, harmful for ABS."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:540
+msgid "Enable fan if layer print time is below"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:541
+msgid ""
+"If layer print time is estimated below this number of seconds, fan will be "
+"enabled and its speed will be calculated by interpolating the minimum and "
+"maximum speeds."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:543 src/libslic3r/PrintConfig.cpp:1663
+msgid "approximate seconds"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:551
+msgid "Color"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:557
+msgid "Filament notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:558
+msgid "You can put your notes regarding the filament here."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:566 src/libslic3r/PrintConfig.cpp:1207
+msgid "Max volumetric speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:567
+msgid ""
+"Maximum volumetric speed allowed for this filament. Limits the maximum "
+"volumetric speed of a print to the minimum of print and filament volumetric "
+"speed. Set to zero for no limit."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:576
+msgid "Loading speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:577
+msgid "Speed used for loading the filament on the wipe tower."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:584
+msgid "Loading speed at the start"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:585
+msgid "Speed used at the very beginning of loading phase."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:592
+msgid "Unloading speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:593
+msgid ""
+"Speed used for unloading the filament on the wipe tower (does not affect  "
+"initial part of unloading just after ramming)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:601
+msgid "Unloading speed at the start"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:602
+msgid ""
+"Speed used for unloading the tip of the filament immediately after ramming."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:609
+msgid "Delay after unloading"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:610
+msgid ""
+"Time to wait after the filament is unloaded. May help to get reliable "
+"toolchanges with flexible materials that may need more time to shrink to "
+"original dimensions."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:619
+msgid "Number of cooling moves"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:620
+msgid ""
+"Filament is cooled by being moved back and forth in the cooling tubes. "
+"Specify desired number of these moves."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:628
+msgid "Speed of the first cooling move"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:629
+msgid "Cooling moves are gradually accelerating beginning at this speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:636
+msgid "Minimal purge on wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:637
+msgid ""
+"After a tool change, the exact position of the newly loaded filament inside "
+"the nozzle may not be known, and the filament pressure is likely not yet "
+"stable. Before purging the print head into an infill or a sacrificial "
+"object, Slic3r will always prime this amount of material into the wipe tower "
+"to produce successive infill or sacrificial object extrusions reliably."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:641
+msgid "mm³"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:647
+msgid "Speed of the last cooling move"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:648
+msgid "Cooling moves are gradually accelerating towards this speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:655
+msgid "Filament load time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:656
+msgid ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:663
+msgid "Ramming parameters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:664
+msgid ""
+"This string is edited by RammingDialog and contains ramming specific "
+"parameters."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:670
+msgid "Filament unload time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:671
+msgid ""
+"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
+"filament during a tool change (when executing the T code). This time is "
+"added to the total print time by the G-code time estimator."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:679
+msgid ""
+"Enter your filament diameter here. Good precision is required, so use a "
+"caliper and do multiple measurements along the filament, then compute the "
+"average."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:686
+msgid "Density"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:687
+msgid ""
+"Enter your filament density here. This is only for statistical information. "
+"A decent way is to weigh a known length of filament and compute the ratio of "
+"the length to volume. Better is to calculate the volume directly through "
+"displacement."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:690
+msgid "g/cm³"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:695
+msgid "Filament type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:696
+msgid "The filament material type for use in custom G-codes."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:712
+msgid "Soluble material"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:713
+msgid "Soluble material is most likely used for a soluble support."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:719
+msgid ""
+"Enter your filament cost per kg here. This is only for statistical "
+"information."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:720
+msgid "money/kg"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:729
+msgid "Fill angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:731
+msgid ""
+"Default base angle for infill orientation. Cross-hatching will be applied to "
+"this. Bridges will be infilled using the best direction Slic3r can detect, "
+"so this setting does not affect them."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:743
+msgid "Fill density"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:745
+msgid "Density of internal infill, expressed in the range 0% - 100%."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:780
+msgid "Fill pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:782
+msgid "Fill pattern for general low-density infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:798
+msgid "Grid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:799
+msgid "Triangles"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:800
+msgid "Stars"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:801
+msgid "Cubic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:802
+msgid "Line"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:804 src/libslic3r/PrintConfig.cpp:1949
+msgid "Honeycomb"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:805
+msgid "3D Honeycomb"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:806
+msgid "Gyroid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:813 src/libslic3r/PrintConfig.cpp:822
+#: src/libslic3r/PrintConfig.cpp:830 src/libslic3r/PrintConfig.cpp:863
+msgid "First layer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:814
+msgid ""
+"This is the acceleration your printer will use for first layer. Set zero to "
+"disable acceleration control for first layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:823
+msgid ""
+"Heated build plate temperature for the first layer. Set this to zero to "
+"disable bed temperature control commands in the output."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:832
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for first "
+"layer. You can use this to force fatter extrudates for better adhesion. If "
+"expressed as percentage (for example 120%) it will be computed over first "
+"layer height. If set to zero, it will use the default extrusion width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:842
+msgid "First layer height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:844
+msgid ""
+"When printing with very low layer heights, you might still want to print a "
+"thicker bottom layer to improve adhesion and tolerance for non perfect build "
+"plates. This can be expressed as an absolute value or as a percentage (for "
+"example: 150%) over the default layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:848 src/libslic3r/PrintConfig.cpp:993
+#: src/libslic3r/PrintConfig.cpp:1822
+msgid "mm or %"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:853
+msgid "First layer speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:854
+msgid ""
+"If expressed as absolute value in mm/s, this speed will be applied to all "
+"the print moves of the first layer, regardless of their type. If expressed "
+"as a percentage (for example: 40%) it will scale the default speeds."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:864
+msgid ""
+"Extruder temperature for first layer. If you want to control temperature "
+"manually during print, set this to zero to disable temperature control "
+"commands in the output file."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:873
+msgid ""
+"Speed for filling small gaps using short zigzag moves. Keep this reasonably "
+"low to avoid too much shaking and resonance issues. Set zero to disable gaps "
+"filling."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:881
+msgid "Verbose G-code"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:882
+msgid ""
+"Enable this to get a commented G-code file, with each line explained by a "
+"descriptive text. If you print from SD card, the additional weight of the "
+"file could make your firmware slow down."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:889
+msgid "G-code flavor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:890
+msgid ""
+"Some G/M-code commands, including temperature control and others, are not "
+"universal. Set this option to your printer's firmware to get a compatible "
+"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
+"extrusion value at all."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:913
+msgid "No extrusion"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:918
+msgid "Label objects"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:919
+msgid ""
+"Enable this to add comments into the G-Code labeling print moves with what "
+"object they belong to, which is useful for the Octoprint CancelObject "
+"plugin. This settings is NOT compatible with Single Extruder Multi Material "
+"setup and Wipe into Object / Wipe into Infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:926
+msgid "High extruder current on filament swap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:927
+msgid ""
+"It may be beneficial to increase the extruder motor current during the "
+"filament exchange sequence to allow for rapid ramming feed rates and to "
+"overcome resistance when loading a filament with an ugly shaped tip."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:935
+msgid ""
+"This is the acceleration your printer will use for infill. Set zero to "
+"disable acceleration control for infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:943
+msgid "Combine infill every"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:945
+msgid ""
+"This feature allows to combine infill and speed up your print by extruding "
+"thicker infill layers while preserving thin perimeters, thus accuracy."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:948
+msgid "Combine infill every n layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:954
+msgid "Infill extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:956
+msgid "The extruder to use when printing infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:964
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. You may want to use fatter extrudates to speed "
+"up the infill and make your parts stronger. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:973
+msgid "Infill before perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:974
+msgid ""
+"This option will switch the print order of perimeters and infill, making the "
+"latter first."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:979
+msgid "Only infill where needed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:981
+msgid ""
+"This option will limit infill to the areas actually needed for supporting "
+"ceilings (it will act as internal support material). If enabled, slows down "
+"the G-code generation due to the multiple checks involved."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:988
+msgid "Infill/perimeters overlap"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:990
+msgid ""
+"This setting applies an additional overlap between infill and perimeters for "
+"better bonding. Theoretically this shouldn't be needed, but backlash might "
+"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
+"perimeter extrusion width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1001
+msgid "Speed for printing the internal fill. Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1009
+msgid "Inherits profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1010
+msgid "Name of the profile, from which this profile inherits."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1023
+msgid "Interface shells"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1024
+msgid ""
+"Force the generation of solid shells between adjacent materials/volumes. "
+"Useful for multi-extruder prints with translucent materials or manual "
+"soluble support material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1033
+msgid ""
+"This custom code is inserted at every layer change, right after the Z move "
+"and before the extruder moves to the first layer point. Note that you can "
+"use placeholder variables for all Slic3r settings as well as [layer_num] and "
+"[layer_z]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1044
+msgid "Supports remaining times"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1045
+msgid ""
+"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
+"intervals into the G-code to let the firmware show accurate remaining time. "
+"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
+"firmware supports M73 Qxx Sxx for the silent mode."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1053
+msgid "Supports stealth mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1054
+msgid "The firmware supports stealth mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1078
+msgid "Maximum feedrate X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1079
+msgid "Maximum feedrate Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1080
+msgid "Maximum feedrate Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1081
+msgid "Maximum feedrate E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1084
+msgid "Maximum feedrate of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1085
+msgid "Maximum feedrate of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1086
+msgid "Maximum feedrate of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1087
+msgid "Maximum feedrate of the E axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1096
+msgid "Maximum acceleration X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1097
+msgid "Maximum acceleration Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1098
+msgid "Maximum acceleration Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1099
+msgid "Maximum acceleration E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1102
+msgid "Maximum acceleration of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1103
+msgid "Maximum acceleration of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1104
+msgid "Maximum acceleration of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1105
+msgid "Maximum acceleration of the E axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1114
+msgid "Maximum jerk X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1115
+msgid "Maximum jerk Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1116
+msgid "Maximum jerk Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1117
+msgid "Maximum jerk E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1120
+msgid "Maximum jerk of the X axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1121
+msgid "Maximum jerk of the Y axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1122
+msgid "Maximum jerk of the Z axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1123
+msgid "Maximum jerk of the E axis"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1134
+msgid "Minimum feedrate when extruding"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1136
+msgid "Minimum feedrate when extruding (M205 S)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1145
+msgid "Minimum travel feedrate"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1147
+msgid "Minimum travel feedrate (M205 T)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1156
+msgid "Maximum acceleration when extruding"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1158
+msgid "Maximum acceleration when extruding (M204 S)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1167
+msgid "Maximum acceleration when retracting"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1169
+msgid "Maximum acceleration when retracting (M204 T)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1177 src/libslic3r/PrintConfig.cpp:1186
+msgid "Max"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1178
+msgid "This setting represents the maximum speed of your fan."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1187
+#, possible-c-format
+msgid ""
+"This is the highest printable layer height for this extruder, used to cap "
+"the variable layer height and support layer height. Maximum recommended "
+"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
+"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1197
+msgid "Max print speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1198
+msgid ""
+"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
+"speed in order to keep constant extruder pressure. This experimental setting "
+"is used to set the highest print speed you want to allow."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1208
+msgid ""
+"This experimental setting is used to set the maximum volumetric speed your "
+"extruder supports."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1217
+msgid "Max volumetric slope positive"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1218 src/libslic3r/PrintConfig.cpp:1229
+msgid ""
+"This experimental setting is used to limit the speed of change in extrusion "
+"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
+"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
+"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1222 src/libslic3r/PrintConfig.cpp:1233
+msgid "mm³/s²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1228
+msgid "Max volumetric slope negative"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1240 src/libslic3r/PrintConfig.cpp:1249
+msgid "Min"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1241
+msgid "This setting represents the minimum PWM your fan needs to work."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1250
+msgid ""
+"This is the lowest printable layer height for this extruder and limits the "
+"resolution for variable layer height. Typical values are between 0.05 mm and "
+"0.1 mm."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1258
+msgid "Min print speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1259
+msgid "Slic3r will not scale speed down below this speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1266
+msgid "Minimal filament extrusion length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1267
+msgid ""
+"Generate no less than the number of skirt loops required to consume the "
+"specified amount of filament on the bottom layer. For multi-extruder "
+"machines, this minimum applies to each extruder."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1276
+msgid "Configuration notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1277
+msgid ""
+"You can put here your personal notes. This text will be added to the G-code "
+"header comments."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1286
+msgid "Nozzle diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1287
+msgid ""
+"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1292
+msgid "Host Type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1293
+msgid ""
+"Slic3r can upload G-code files to a printer host. This field must contain "
+"the kind of the host."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1304
+msgid "Only retract when crossing perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1305
+msgid ""
+"Disables retraction when the travel path does not exceed the upper layer's "
+"perimeters (and thus any ooze will be probably invisible)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1312
+msgid ""
+"This option will drop the temperature of the inactive extruders to prevent "
+"oozing. It will enable a tall skirt automatically and move extruders outside "
+"such skirt when changing temperatures."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1319
+msgid "Output filename format"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1320
+msgid ""
+"You can use all configuration options as variables inside this template. For "
+"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
+"[year], [month], [day], [hour], [minute], [second], [version], "
+"[input_filename], [input_filename_base]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1329
+msgid "Detect bridging perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1331
+msgid ""
+"Experimental option to adjust flow for overhangs (bridge flow will be used), "
+"to apply bridge speed to them and enable fan."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1337
+msgid "Filament parking position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1338
+msgid ""
+"Distance of the extruder tip from the position where the filament is parked "
+"when unloaded. This should match the value in printer firmware."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1346
+msgid "Extra loading distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1347
+msgid ""
+"When set to zero, the distance the filament is moved from parking position "
+"during load is exactly the same as it was moved back during unload. When "
+"positive, it is loaded further,  if negative, the loading move is shorter "
+"than unloading."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1355 src/libslic3r/PrintConfig.cpp:1373
+#: src/libslic3r/PrintConfig.cpp:1385 src/libslic3r/PrintConfig.cpp:1395
+msgid "Perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1356
+msgid ""
+"This is the acceleration your printer will use for perimeters. A high value "
+"like 9000 usually gives good results if your hardware is up to the job. Set "
+"zero to disable acceleration control for perimeters."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1364
+msgid "Perimeter extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1366
+msgid ""
+"The extruder to use when printing perimeters and brim. First extruder is 1."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1375
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for perimeters. "
+"You may want to use thinner extrudates to get more accurate surfaces. If "
+"left zero, default extrusion width will be used if set, otherwise 1.125 x "
+"nozzle diameter will be used. If expressed as percentage (for example 200%) "
+"it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1387
+msgid ""
+"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1397
+msgid ""
+"This option sets the number of perimeters to generate for each layer. Note "
+"that Slic3r may increase this number automatically when it detects sloping "
+"surfaces which benefit from a higher number of perimeters if the Extra "
+"Perimeters option is enabled."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1401
+msgid "(minimum)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1409
+msgid ""
+"If you want to process the output G-code through custom scripts, just list "
+"their absolute paths here. Separate multiple scripts with a semicolon. "
+"Scripts will be passed the absolute path to the G-code file as the first "
+"argument, and they can access the Slic3r config settings by reading "
+"environment variables."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1421
+msgid "Printer type"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1422
+msgid "Type of the printer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1427
+msgid "Printer notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1428
+msgid "You can put your notes regarding the printer here."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1436
+msgid "Printer vendor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1437
+msgid "Name of the printer vendor."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1442
+msgid "Printer variant"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1443
+msgid ""
+"Name of the printer variant. For example, the printer variants may be "
+"differentiated by a nozzle diameter."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1456
+msgid "Raft layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1458
+msgid ""
+"The object will be raised by this number of layers, and support material "
+"will be generated under it."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1466
+msgid "Resolution"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1467
+msgid ""
+"Minimum detail resolution, used to simplify the input file for speeding up "
+"the slicing job and reducing memory usage. High-resolution models often "
+"carry more detail than printers can render. Set to zero to disable any "
+"simplification and use full resolution from input."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1477
+msgid "Minimum travel after retraction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1478
+msgid ""
+"Retraction is not triggered when travel moves are shorter than this length."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1484
+msgid "Retract amount before wipe"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1485
+msgid ""
+"With bowden extruders, it may be wise to do some amount of quick retract "
+"before doing the wipe movement."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1492
+msgid "Retract on layer change"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1493
+msgid "This flag enforces a retraction whenever a Z move is done."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1498 src/libslic3r/PrintConfig.cpp:1506
+msgid "Length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1499
+msgid "Retraction Length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1500
+msgid ""
+"When retraction is triggered, filament is pulled back by the specified "
+"amount (the length is measured on raw filament, before it enters the "
+"extruder)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1502 src/libslic3r/PrintConfig.cpp:1511
+msgid "mm (zero to disable)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1507
+msgid "Retraction Length (Toolchange)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1508
+msgid ""
+"When retraction is triggered before changing tool, filament is pulled back "
+"by the specified amount (the length is measured on raw filament, before it "
+"enters the extruder)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1516
+msgid "Lift Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1517
+msgid ""
+"If you set this to a positive value, Z is quickly raised every time a "
+"retraction is triggered. When using multiple extruders, only the setting for "
+"the first extruder will be considered."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1524
+msgid "Above Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1525
+msgid "Only lift Z above"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1526
+msgid ""
+"If you set this to a positive value, Z lift will only take place above the "
+"specified absolute Z. You can tune this setting for skipping lift on the "
+"first layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1533
+msgid "Below Z"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1534
+msgid "Only lift Z below"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1535
+msgid ""
+"If you set this to a positive value, Z lift will only take place below the "
+"specified absolute Z. You can tune this setting for limiting lift to the "
+"first layers."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1543 src/libslic3r/PrintConfig.cpp:1551
+msgid "Extra length on restart"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1544
+msgid ""
+"When the retraction is compensated after the travel move, the extruder will "
+"push this additional amount of filament. This setting is rarely needed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1552
+msgid ""
+"When the retraction is compensated after changing tool, the extruder will "
+"push this additional amount of filament."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1559 src/libslic3r/PrintConfig.cpp:1560
+msgid "Retraction Speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1561
+msgid "The speed for retractions (it only applies to the extruder motor)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1567 src/libslic3r/PrintConfig.cpp:1568
+msgid "Deretraction Speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1569
+msgid ""
+"The speed for loading of a filament into extruder after retraction (it only "
+"applies to the extruder motor). If left to zero, the retraction speed is "
+"used."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1576
+msgid "Seam position"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1578
+msgid "Position of perimeters starting points."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1584
+msgid "Random"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1585
+msgid "Nearest"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1586
+msgid "Aligned"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1594
+msgid "Direction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1596
+msgid "Preferred direction of the seam"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1597
+msgid "Seam preferred direction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1604
+msgid "Jitter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1606
+msgid "Seam preferred direction jitter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1607
+msgid "Preferred direction of the seam - jitter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1617
+msgid "USB/serial port for printer connection."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1624
+msgid "Serial port speed"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1625
+msgid "Speed (baud) of USB/serial port for printer connection."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1634
+msgid "Distance from object"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1635
+msgid ""
+"Distance between skirt and object(s). Set this to zero to attach the skirt "
+"to the object(s) and get a brim for better adhesion."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1642
+msgid "Skirt height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1643
+msgid ""
+"Height of skirt expressed in layers. Set this to a tall value to use skirt "
+"as a shield against drafts."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1650
+msgid "Loops (minimum)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1651
+msgid "Skirt Loops"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1652
+msgid ""
+"Number of loops for the skirt. If the Minimum Extrusion Length option is "
+"set, the number of loops might be greater than the one configured here. Set "
+"this to zero to disable skirt completely."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1660
+msgid "Slow down if layer print time is below"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1661
+msgid ""
+"If layer print time is estimated below this number of seconds, print moves "
+"speed will be scaled down to extend duration to this value."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1671
+msgid "Small perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1673
+msgid ""
+"This separate setting will affect the speed of perimeters having radius <= "
+"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
+"be calculated on the perimeters speed setting above. Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1683
+msgid "Solid infill threshold area"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1685
+msgid ""
+"Force solid infill for regions having a smaller area than the specified "
+"threshold."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1686
+msgid "mm²"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1692
+msgid "Solid infill extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1694
+msgid "The extruder to use when printing solid infill."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1700
+msgid "Solid infill every"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1702
+msgid ""
+"This feature allows to force a solid layer every given number of layers. "
+"Zero to disable. You can set this to any value (for example 9999); Slic3r "
+"will automatically choose the maximum possible number of layers to combine "
+"according to nozzle diameter and layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1714
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"solid surfaces. If left zero, default extrusion width will be used if set, "
+"otherwise 1.125 x nozzle diameter will be used. If expressed as percentage "
+"(for example 90%) it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1724
+msgid ""
+"Speed for printing solid regions (top/bottom/internal horizontal shells). "
+"This can be expressed as a percentage (for example: 80%) over the default "
+"infill speed above. Set to zero for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1736
+msgid "Number of solid layers to generate on top and bottom surfaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1742
+msgid "Spiral vase"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1743
+msgid ""
+"This feature will raise Z gradually while printing a single-walled object in "
+"order to remove any visible seam. This option requires a single perimeter, "
+"no infill, no top solid layers and no support material. You can still set "
+"any number of bottom solid layers as well as skirt/brim loops. It won't work "
+"when printing more than an object."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1751
+msgid "Temperature variation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1752
+msgid ""
+"Temperature difference to be applied when an extruder is not active. Enables "
+"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
+"wiped."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1762
+msgid ""
+"This start procedure is inserted at the beginning, after bed has reached the "
+"target temperature and extruder just started heating, and before extruder "
+"has finished heating. If Slic3r detects M104 or M190 in your custom codes, "
+"such commands will not be prepended automatically so you're free to "
+"customize the order of heating commands and other custom actions. Note that "
+"you can use placeholder variables for all Slic3r settings, so you can put a "
+"\"M109 S[first_layer_temperature]\" command wherever you want."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1777
+msgid ""
+"This start procedure is inserted at the beginning, after any printer start "
+"gcode. This is used to override settings for a specific filament. If Slic3r "
+"detects M104, M109, M140 or M190 in your custom codes, such commands will "
+"not be prepended automatically so you're free to customize the order of "
+"heating commands and other custom actions. Note that you can use placeholder "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want. If you have multiple "
+"extruders, the gcode is processed in extruder order."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1792
+msgid "Single Extruder Multi Material"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1793
+msgid "The printer multiplexes filaments into a single hot end."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1798
+msgid "Prime all printing extruders"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1799
+msgid ""
+"If enabled, all printing extruders will be primed at the front edge of the "
+"print bed at the start of the print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1804
+msgid "Generate support material"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1806
+msgid "Enable support material generation."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1810
+msgid "Auto generated supports"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1812
+msgid ""
+"If checked, supports will be generated automatically based on the overhang "
+"threshold value. If unchecked, supports will be generated inside the "
+"\"Support Enforcer\" volumes only."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1818
+msgid "XY separation between an object and its support"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1820
+msgid ""
+"XY separation between an object and its support. If expressed as percentage "
+"(for example 50%), it will be calculated over external perimeter width."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1830
+msgid "Pattern angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1832
+msgid ""
+"Use this setting to rotate the support material pattern on the horizontal "
+"plane."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1842 src/libslic3r/PrintConfig.cpp:2450
+msgid ""
+"Only create support if it lies on a build plate. Don't create support on a "
+"print."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1848
+msgid "Contact Z distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1850
+msgid ""
+"The vertical distance between object and support material interface. Setting "
+"this to 0 will also prevent Slic3r from using bridge flow and speed for the "
+"first object layer."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1857
+msgid "0 (soluble)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1858
+msgid "0.2 (detachable)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1863
+msgid "Enforce support for the first"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1865
+msgid ""
+"Generate support material for the specified number of layers counting from "
+"bottom, regardless of whether normal support material is enabled or not and "
+"regardless of any angle threshold. This is useful for getting more adhesion "
+"of objects having a very thin or poor footprint on the build plate."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1870
+msgid "Enforce support for the first n layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1876
+msgid "Support material/raft/skirt extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1878
+msgid ""
+"The extruder to use when printing support material, raft and skirt (1+, 0 to "
+"use the current extruder to minimize tool changes)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1887
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for support "
+"material. If left zero, default extrusion width will be used if set, "
+"otherwise nozzle diameter will be used. If expressed as percentage (for "
+"example 90%) it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1895
+msgid "Interface loops"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1897
+msgid ""
+"Cover the top contact layer of the supports with loops. Disabled by default."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1902
+msgid "Support material/raft interface extruder"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1904
+msgid ""
+"The extruder to use when printing support material interface (1+, 0 to use "
+"the current extruder to minimize tool changes). This affects raft too."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1911
+msgid "Interface layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1913
+msgid ""
+"Number of interface layers to insert between the object(s) and support "
+"material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1920
+msgid "Interface pattern spacing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1922
+msgid "Spacing between interface lines. Set zero to get a solid interface."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1931
+msgid ""
+"Speed for printing support material interface layers. If expressed as "
+"percentage (for example 50%) it will be calculated over support material "
+"speed."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1940
+msgid "Pattern"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1942
+msgid "Pattern used to generate support material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1948
+msgid "Rectilinear grid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1954
+msgid "Pattern spacing"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1956
+msgid "Spacing between support material lines."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1965
+msgid "Speed for printing support material."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1972
+msgid "Synchronize with object layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1974
+msgid ""
+"Synchronize support layers with the object print layers. This is useful with "
+"multi-material printers, where the extruder switch is expensive."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1980
+msgid "Overhang threshold"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1982
+msgid ""
+"Support material will not be generated for overhangs whose slope angle (90° "
+"= vertical) is above the given threshold. In other words, this value "
+"represent the most horizontal slope (measured from the horizontal plane) "
+"that you can print without support material. Set to zero for automatic "
+"detection (recommended)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1994
+msgid "With sheath around the support"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:1996
+msgid ""
+"Add a sheath (a single perimeter line) around the base support. This makes "
+"the support more reliable, but also more difficult to remove."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2003
+msgid ""
+"Extruder temperature for layers after the first one. Set this to zero to "
+"disable temperature control commands in the output."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2011
+msgid "Detect thin walls"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2013
+msgid ""
+"Detect single-width walls (parts where two extrusions don't fit and we need "
+"to collapse them into a single trace)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2019
+msgid "Threads"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2020
+msgid ""
+"Threads are used to parallelize long-running tasks. Optimal threads number "
+"is slightly above the number of available cores/processors."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2032
+msgid ""
+"This custom code is inserted right before every extruder change. Note that "
+"you can use placeholder variables for all Slic3r settings as well as "
+"[previous_extruder] and [next_extruder]."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2044
+msgid ""
+"Set this to a non-zero value to set a manual extrusion width for infill for "
+"top surfaces. You may want to use thinner extrudates to fill all narrow "
+"regions and get a smoother finish. If left zero, default extrusion width "
+"will be used if set, otherwise nozzle diameter will be used. If expressed as "
+"percentage (for example 90%) it will be computed over layer height."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2055
+msgid ""
+"Speed for printing top solid layers (it only applies to the uppermost "
+"external layers and not to their internal solid layers). You may want to "
+"slow down this to get a nicer surface finish. This can be expressed as a "
+"percentage (for example: 80%) over the solid infill speed above. Set to zero "
+"for auto."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2070
+msgid "Number of solid layers to generate on top surfaces."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2071
+msgid "Top solid layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2077
+msgid "Speed for travel moves (jumps between distant extrusion points)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2085
+msgid "Use firmware retraction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2086
+msgid ""
+"This experimental setting uses G10 and G11 commands to have the firmware "
+"handle the retraction. This is only supported in recent Marlin."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2092
+msgid "Use relative E distances"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2093
+msgid ""
+"If your firmware requires relative E values, check this, otherwise leave it "
+"unchecked. Most firmwares use absolute values."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2099
+msgid "Use volumetric E"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2100
+msgid ""
+"This experimental setting uses outputs the E values in cubic millimeters "
+"instead of linear millimeters. If your firmware doesn't already know "
+"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
+"T0' in your start G-code in order to turn volumetric mode on and use the "
+"filament diameter associated to the filament selected in Slic3r. This is "
+"only supported in recent Marlin."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2110
+msgid "Enable variable layer height feature"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2111
+msgid ""
+"Some printers or printer setups may have difficulties printing with a "
+"variable layer height. Enabled by default."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2117
+msgid "Wipe while retracting"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2118
+msgid ""
+"This flag will move the nozzle while retracting to minimize the possible "
+"blob on leaky extruders."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2125
+msgid ""
+"Multi material printers may need to prime or purge extruders on tool "
+"changes. Extrude the excess material into the wipe tower."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2131
+msgid "Purging volumes - load/unload volumes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2132
+msgid ""
+"This vector saves required volumes to change from/to each tool used on the "
+"wipe tower. These values are used to simplify creation of the full purging "
+"volumes below."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2138
+msgid "Purging volumes - matrix"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2139
+msgid ""
+"This matrix describes volumes (in cubic milimetres) required to purge the "
+"new filament on the wipe tower for any given pair of tools."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2148
+msgid "Position X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2149
+msgid "X coordinate of the left front corner of a wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2155
+msgid "Position Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2156
+msgid "Y coordinate of the left front corner of a wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2163
+msgid "Width of a wipe tower"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2169
+msgid "Wipe tower rotation angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2170
+msgid "Wipe tower rotation angle with respect to x-axis."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2177
+msgid "Wipe into this object's infill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2178
+msgid ""
+"Purging after toolchange will done inside this object's infills. This lowers "
+"the amount of waste but may result in longer print time  due to additional "
+"travel moves."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2185
+msgid "Wipe into this object"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2186
+msgid ""
+"Object will be used to purge the nozzle after a toolchange to save material "
+"that would otherwise end up in the wipe tower and decrease print time. "
+"Colours of the objects will be mixed as a result."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2192
+msgid "Maximal bridging distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2193
+msgid "Maximal distance between supports on sparse infill sections."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2199
+msgid "XY Size Compensation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2201
+msgid ""
+"The object will be grown/shrunk in the XY plane by the configured value "
+"(negative = inwards, positive = outwards). This might be useful for fine-"
+"tuning hole sizes."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2209
+msgid "Z offset"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2210
+msgid ""
+"This value will be added (or subtracted) from all the Z coordinates in the "
+"output G-code. It is used to compensate for bad Z endstop position: for "
+"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
+"print bed, set this to -0.3 (or fix your endstop)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2227
+msgid "Display width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2228
+msgid "Width of the display"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2233
+msgid "Display height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2234
+msgid "Height of the display"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2239
+msgid "Number of pixels in"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2241
+msgid "Number of pixels in X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2247
+msgid "Number of pixels in Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2252
+msgid "Display orientation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2253
+msgid ""
+"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
+"will flip the meaning of display width and height parameters and the output "
+"images will be rotated by 90 degrees."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2259
+msgid "Landscape"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2260
+msgid "Portrait"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2265
+msgid "Fast"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2266
+msgid "Fast tilt"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2267
+msgid "Time of the fast tilt"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2274
+msgid "Slow"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2275
+msgid "Slow tilt"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2276
+msgid "Time of the slow tilt"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2283
+msgid "Area fill"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2284
+msgid ""
+"The percentage of the bed area. \n"
+"If the print area exceeds the specified value, \n"
+"then a slow tilt will be used, otherwise - a fast tilt"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2291 src/libslic3r/PrintConfig.cpp:2292
+#: src/libslic3r/PrintConfig.cpp:2293
+msgid "Printer scaling correction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2299 src/libslic3r/PrintConfig.cpp:2300
+msgid "Printer absolute correction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2301
+msgid ""
+"Will inflate or deflate the sliced 2D polygons according to the sign of the "
+"correction."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2307 src/libslic3r/PrintConfig.cpp:2308
+msgid "Printer gamma correction"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2309
+msgid ""
+"This will apply a gamma correction to the rasterized 2D polygons. A gamma "
+"value of zero means thresholding with the threshold in the middle. This "
+"behaviour eliminates antialiasing without losing holes in polygons."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2320 src/libslic3r/PrintConfig.cpp:2321
+msgid "Initial layer height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2327
+msgid "Faded layers"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2328
+msgid ""
+"Number of the layers needed for the exposure time fade from initial exposure "
+"time to the exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2335 src/libslic3r/PrintConfig.cpp:2336
+msgid "Exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2342 src/libslic3r/PrintConfig.cpp:2343
+msgid "Initial exposure time"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2349 src/libslic3r/PrintConfig.cpp:2350
+msgid "Correction for expansion"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2356
+msgid "SLA print material notes"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2357
+msgid "You can put your notes regarding the SLA print material here."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2365 src/libslic3r/PrintConfig.cpp:2376
+msgid "Default SLA material profile"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2387
+msgid "Generate supports"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2389
+msgid "Generate supports for the models"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2394
+msgid "Support head front diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2396
+msgid "Diameter of the pointing side of the head"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2403
+msgid "Support head penetration"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2405
+msgid "How much the pinhead has to penetrate the model surface"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2412
+msgid "Support head width"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2414
+msgid "Width from the back sphere center to the front sphere center"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2422
+msgid "Support pillar diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2424
+msgid "Diameter in mm of the support pillars"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2432
+msgid "Support pillar connection mode"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2433
+msgid ""
+"Controls the bridge type between two neighboring pillars. Can be zig-zag, "
+"cross (double zig-zag) or dynamic which will automatically switch between "
+"the first two depending on the distance of the two pillars."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2441
+msgid "Zig-Zag"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2442
+msgid "Cross"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2443
+msgid "Dynamic"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2455
+msgid "Pillar widening factor"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2457
+msgid ""
+"Merging bridges or pillars into another pillars can increase the radius. "
+"Zero means no increase, one means full increase."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2466
+msgid "Support base diameter"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2468
+msgid "Diameter in mm of the pillar base"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2476
+msgid "Support base height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2478
+msgid "The height of the pillar base cone"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2485
+msgid "Critical angle"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2487
+msgid "The default angle for connecting support sticks and junctions."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2495
+msgid "Max bridge length"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2497
+msgid "The max length of a bridge"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2504
+msgid "Max pillar linking distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2506
+msgid ""
+"The max distance of two pillars to get linked with each other. A zero value "
+"will prohibit pillar cascading."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2514
+msgid "Object elevation"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2516
+msgid "How much the supports should lift up the supported object."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2526
+msgid "This is a relative measure of support points density."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2532
+msgid "Minimal distance of the support points"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2534
+msgid "No support points will be placed closer than this threshold."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2540
+msgid "Use pad"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2542
+msgid "Add a pad underneath the supported model"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2547
+msgid "Pad wall thickness"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2549
+msgid "The thickness of the pad and its optional cavity walls."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2557
+msgid "Pad wall height"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2558
+msgid ""
+"Defines the pad cavity depth. Set to zero to disable the cavity. Be careful "
+"when enabling this feature, as some resins may produce an extreme suction "
+"effect inside the cavity, which makes peeling the print off the vat foil "
+"difficult."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2571
+msgid "Max merge distance"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2573
+msgid ""
+"Some objects can get along with a few smaller pads instead of a single big "
+"one. This parameter defines how far the center of two smaller pads should "
+"be. If theyare closer, they will get merged into one pad."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2584
+msgid "Pad edge radius"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2593
+msgid "Pad wall slope"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2595
+msgid ""
+"The slope of the pad wall relative to the bed plane. 90 degrees means "
+"straight walls."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2957
+msgid "Export OBJ"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2958
+msgid "Export the model(s) as OBJ."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2969
+msgid "Export SLA"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2970
+msgid "Slice the model and export SLA printing layers as PNG."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2975
+msgid "Export 3MF"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2976
+msgid "Export the model(s) as 3MF."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2980
+msgid "Export AMF"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2981
+msgid "Export the model(s) as AMF."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2985
+msgid "Export STL"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2986
+msgid "Export the model(s) as STL."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2991
+msgid "Slice the model and export toolpaths as G-code."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2996
+msgid "Slice"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:2997
+msgid ""
+"Slice the model as FFF or SLA based on the printer_technology configuration "
+"value."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3002
+msgid "Help"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3003
+msgid "Show this help."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3008
+msgid "Help (FFF options)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3009
+msgid "Show the full list of print/G-code configuration options."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3013
+msgid "Help (SLA options)"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3014
+msgid "Show the full list of SLA print configuration options."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3018
+msgid "Output Model Info"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3019
+msgid "Write information about the model to the console."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3023
+msgid "Save config file"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3024
+msgid "Save configuration to the specified file."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3034
+msgid "Align XY"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3035
+msgid "Align the model to the given point."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3040
+msgid "Cut model at the given Z."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3061
+msgid "Center"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3062
+msgid "Center the print around the given center."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3066
+msgid "Don't arrange"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3067
+msgid ""
+"Do not rearrange the given models before merging and keep their original XY "
+"coordinates."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3070
+msgid "Duplicate"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3071
+msgid "Multiply copies by this factor."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3075
+msgid "Duplicate by grid"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3076
+msgid "Multiply copies by creating a grid."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3079
+msgid "Merge"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3080
+msgid ""
+"Arrange the supplied models in a plate and merge them in a single model in "
+"order to perform actions once."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3085
+msgid ""
+"Try to repair any non-manifold meshes (this option is implicitly added "
+"whenever we need to slice the model to perform the requested action)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3089
+msgid "Rotation angle around the Z axis in degrees."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3093
+msgid "Rotate around X"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3094
+msgid "Rotation angle around the X axis in degrees."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3098
+msgid "Rotate around Y"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3099
+msgid "Rotation angle around the Y axis in degrees."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3104
+msgid "Scaling factor or percentage."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3109
+msgid ""
+"Detect unconnected parts in the given model(s) and split them into separate "
+"objects."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3112
+msgid "Scale to Fit"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3113
+msgid "Scale to fit the given volume."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3122
+msgid "Ignore non-existent config files"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3123
+msgid "Do not fail if a file supplied to --load does not exist."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3126
+msgid "Load config file"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3127
+msgid ""
+"Load configuration from the specified file. It can be used more than once to "
+"load options from multiple files."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3130
+msgid "Output File"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3131
+msgid ""
+"The file where the output will be written (if not specified, it will be "
+"based on the input file)."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3141
+msgid "Data directory"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3142
+msgid ""
+"Load and store settings at the given directory. This is useful for "
+"maintaining different profiles or including configurations from a network "
+"storage."
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3145
+msgid "Logging level"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3146
+msgid ""
+"Messages with severity lower or eqal to the loglevel will be printed out. 0:"
+"trace, 1:debug, 2:info, 3:warning, 4:error, 5:fatal"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3151
+msgid "Render with a software renderer"
+msgstr ""
+
+#: src/libslic3r/PrintConfig.cpp:3152
+msgid ""
+"Render with a software renderer. The bundled MESA software renderer is "
+"loaded instead of the default OpenGL driver."
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:110
+msgid "Processing triangulated mesh"
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:141
+msgid "Generating perimeters"
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:251
+msgid "Preparing infill"
+msgstr ""
+
+#: src/libslic3r/PrintObject.cpp:391
+msgid "Generating support material"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:176
+msgid "Mixed"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:396
+msgid "Height (mm)"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:398
+msgid "Width (mm)"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:400
+msgid "Speed (mm/s)"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:402
+msgid "Volumetric flow rate (mm3/s)"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:491
+msgid "Default print color"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:495
+#, possible-c-format
+msgid "up to %.2f mm"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:499
+#, possible-c-format
+msgid "above %.2f mm"
+msgstr ""
+
+#: src/libslic3r/GCode/PreviewData.cpp:504
+#, possible-c-format
+msgid "%.2f - %.2f mm"
+msgstr ""
diff --git a/src/slic3r/GUI/GUI_ObjectList.cpp b/src/slic3r/GUI/GUI_ObjectList.cpp
index f59c8739d..880d511d7 100644
--- a/src/slic3r/GUI/GUI_ObjectList.cpp
+++ b/src/slic3r/GUI/GUI_ObjectList.cpp
@@ -1207,8 +1207,6 @@ wxMenuItem* ObjectList::append_menu_item_instance_to_object(wxMenu* menu)
 
 void ObjectList::append_menu_items_osx(wxMenu* menu)
 {
-    append_menu_item_delete(menu);
-    
     append_menu_item(menu, wxID_ANY, _(L("Rename")), "",
         [this](wxCommandEvent&) { rename_item(); }, "", menu);
     
@@ -1327,9 +1325,6 @@ void ObjectList::create_part_popupmenu(wxMenu *menu)
 
 void ObjectList::create_instance_popupmenu(wxMenu*menu)
 {
-#ifdef __WXOSX__  
-    append_menu_item_delete(menu);
-#endif // __WXOSX__
     m_menu_item_split_instances = append_menu_item_instance_to_object(menu);
 
     /* New behavior logic:
@@ -2545,9 +2540,9 @@ void ObjectList::change_part_type()
         }
     }
 
-    const wxString names[] = { "Part", "Modifier", "Support Enforcer", "Support Blocker" };
+    const wxString names[] = { _(L("Part")), _(L("Modifier")), _(L("Support Enforcer")), _(L("Support Blocker")) };
     
-    auto new_type = ModelVolumeType(wxGetSingleChoiceIndex("Type: ", _(L("Select type of part")), wxArrayString(4, names), int(type)));
+    auto new_type = ModelVolumeType(wxGetSingleChoiceIndex(_(L("Type:")), _(L("Select type of part")), wxArrayString(4, names), int(type)));
 
 	if (new_type == type || new_type == ModelVolumeType::INVALID)
         return;
@@ -2837,10 +2832,6 @@ void ObjectList::show_multi_selection_menu()
 
     wxMenu* menu = new wxMenu();
 
-#ifdef __WXOSX__
-    append_menu_item_delete(menu);
-#endif //__WXOSX__
-
     if (extruders_count() > 1)
         append_menu_item(menu, wxID_ANY, _(L("Set extruder for selected items")),
             _(L("Select extruder number for selected objects and/or parts")),