diff --git a/resources/profiles/TriLAB.idx b/resources/profiles/TriLAB.idx index b64aab27b..3e2a7c824 100644 --- a/resources/profiles/TriLAB.idx +++ b/resources/profiles/TriLAB.idx @@ -1,3 +1,11 @@ +min_slic3r_version = 2.5.2-alpha0 +1.0.4 Added new printer AzteQ Dynamic, Added AzteQ Dynamic material profiles for Prusament ASA, Prusa EasyABS, Prusament PLA, Prusament PETG, Smartfil PLA, Prusament PETG Carbon Fiber, Added AzteQ Industrial material profiles for Prusa EasyABS, Filament PM PAJet 160, Prusament PLA, Prusament PETG, Prusament PA11 Carbon Fiber, Smartfil PLA, Prusament PETG Carbon Fiber, Added DeltiQ 2 material profiles for Prusament PA11 Carbon Fiber, Prusament PC Blend Carbon Fiber, Prusament PETG, Fiberlogy Nylon PA12+CF15, Fiberlogy Nylon PA12+GF15, Prusament PVB, Prusament PC Blend Carbon Fiber 0.6 nozzle, Fiberlogy Nylon PA12+CF15 0.6 nozzle, Fiberlogy Nylon PA12+GF15 0.6 nozzle, Added FlexPrint 2 material profiles for Fiberlogy PP, NinjaTek TPU 75D, Changing the names of materials, Some minor print styles improvements +min_slic3r_version = 2.5.0-alpha0 +1.0.3 Added DeltiQ 2 materials PETG (Prusa Polymers), PA11 Carbon Fiber (Prusa Polymers), PC Blend Carbon Fiber (Prusa Polymers), Improved DeltiQ 2 material PLA Prusament, Improved output filename template(added filament used weight, fixed timestamp, fixed invalid printhead code) +1.0.2 Added home to start gcode before heating bed, added DeltiQ 2 material PLA Prusament, fixed gcode for pause print, improved output filename template(added printhead code, added filament used length, truncated timestamp) +min_slic3r_version = 2.4.1-rc1 +1.0.1 Fix missing AzteQ Industrial ABS material for 0.6, 0.8 nozzle, enabled elefant foot compensation +1.0.0 Added AzteQ Industrial profiles for 0.8 nozzle, updated spool weight and filament cost, some minor setting improvements min_slic3r_version = 2.3.2-alpha0 0.0.9 Added AzteQ Industrial materials PC/ABS (Fillamentum), PC-Max (Polymaker), Nylon FX256 (Fillamentum), Added DeltiQ 2 materials Nylon PA12 (Fiberlogy), Nylon CF15 Carbon (Fillamentum), PEBA 90A - FlexFill (Fillamentum), MoldLay (Wax-Alike), disabled retract only when crossing perimeters, some minor setting improvements 0.0.8 Added new AzteQ Industrial printer, added DeltiQ 2 profiles for 0.6mm nozzle, added material ASA 275 (Spectrum), some minor setting improvements diff --git a/resources/profiles/TriLAB.ini b/resources/profiles/TriLAB.ini index 8a68b8219..05c734f8e 100644 --- a/resources/profiles/TriLAB.ini +++ b/resources/profiles/TriLAB.ini @@ -6,7 +6,7 @@ name = TriLAB # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 0.0.9 +config_version = 1.0.4 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/ # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% @@ -17,12 +17,21 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus [printer_model:AQI] name = AzteQ Industrial -variants = 0.4; 0.6 +variants = 0.4; 0.6; 0.8 technology = FFF family = AzteQ bed_model = aq_bed.stl bed_texture = aq_bed_texture.svg -default_materials = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum);AzteQ Industrial (Door Opened) - PLA - Generic;AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum);AzteQ Industrial - ABS - ExtraFill (Fillamentum);AzteQ Industrial - ABS - Generic;AzteQ Industrial - ASA - ExtraFill (Fillamentum);AzteQ Industrial - ASA - Generic;AzteQ Industrial - ASA - Prusament (Prusa);AzteQ Industrial - PA - Nylon PA12 (Fiberlogy);AzteQ Industrial - PC Blend - Prusament (Prusa);AzteQ Industrial - PC - PolyMax (Polymaker);AzteQ Industrial - PC - PolyMax (Polymaker) @0.6 nozzle;AzteQ Industrial - PC/ABS - (Fillamentum);AzteQ Industrial - PC/ABS - (Fillamentum) @0.6 nozzle;AzteQ Industrial - PA - Nylon FX256 (Fillamentum);AzteQ Industrial - PA - Nylon FX256 (Fillamentum) @0.6 nozzle +default_materials = Fillamentum PLA (Door Opened) @AQI;Generic PLA (Door Opened) @AQI;Fillamentum PLA (PLA Printhead) @AQI;Fillamentum ABS @AQI;Generic ABS @AQI;Fillamentum ASA @AQI;Generic ASA @AQI;Prusament ASA @AQI;Fiberlogy Nylon PA12 @AQI;Prusament PC Blend @AQI;Polymaker PC @AQI;Polymaker PC @AQI 0.6 nozzle;Fillamentum PC/ABS @AQI;Fillamentum PC/ABS @AQI 0.6 nozzle;Fillamentum Nylon FX256 @AQI;Fillamentum Nylon FX256 @AQI 0.6 nozzle;Generic ABS @AQI 0.8 nozzle;Fillamentum ABS @AQI 0.8 nozzle;Fillamentum ASA @AQI 0.8 nozzle;Prusament ASA @AQI 0.8 nozzle;Prusament PC Blend @AQI 0.8 nozzle;Prusa EasyABS @AQI;Filament PM PAJet 160 @AQI;Prusament PLA (Door Opened) @AQI;Prusament PETG @AQI;Prusament PA11 Carbon Fiber @AQI;Smartfil PLA (Door Opened) @AQI;Prusament PETG Carbon Fiber @AQI + +[printer_model:AQD] +name = AzteQ Dynamic +variants = 0.4 +technology = FFF +family = AzteQ +bed_model = aq_bed.stl +bed_texture = aq_bed_texture.svg +default_materials = Prusament ASA @AQD; Prusa EasyABS @AQD;Prusament PLA (Door Opened) @AQD;Prusament PETG @AQD;Smartfil PLA (Door Opened) @AQD;Prusament PETG Carbon Fiber @AQD [printer_model:DQ2] name = DeltiQ 2 @@ -31,7 +40,7 @@ technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ - PLA - Generic;DeltiQ - PLA - ExtraFill (Fillamentum);DeltiQ - PETG - Generic;DeltiQ - PETG (Devil Design);DeltiQ - ABS - Generic;DeltiQ - ABS - ExtraFill (Fillamentum);DeltiQ - ASA - ExtraFill (Fillamentum);DeltiQ - ASA - ASA 275 (Spectrum);DeltiQ - CPE - HG100 (Fillamentum);DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle;DeltiQ - PETG (Devil Design) @0.25 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - PETG (Devil Design) @0.6 nozzle;DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle;DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle;DeltiQ - PETG (Devil Design) @0.8 nozzle;DeltiQ - PA - Nylon PA12 (Fiberlogy);DeltiQ - PA - Nylon CF15 Carbon (Fillamentum);DeltiQ - MoldLay (Wax-Alike) +default_materials = Generic PLA @DQ2;Prusament PLA @DQ2;Fillamentum PLA @DQ2;Generic PETG @DQ2;Devil Design PETG @DQ2;Generic ABS @DQ2;Fillamentum ABS @DQ2;Fillamentum ASA @DQ2;Spectrum ASA @DQ2;Fillamentum CPE HG100 @DQ2;Fillamentum PLA @DQ2 0.25 nozzle;Devil Design PETG @DQ2 0.25 nozzle;Prusament PLA @DQ2 0.6 nozzle;Fillamentum PLA @DQ2 0.6 nozzle;Devil Design PETG @DQ2 0.6 nozzle;Fillamentum ABS @DQ2 0.6 nozzle;Fillamentum ASA @DQ2 0.6 nozzle;Spectrum ASA @DQ2 0.6 nozzle;Fillamentum CPE HG100 @DQ2 0.6 nozzle;Prusament PLA @DQ2 0.8 nozzle;Fillamentum PLA @DQ2 0.8 nozzle;Devil Design PETG @DQ2 0.8 nozzle;Fiberlogy Nylon PA12 @DQ2;Fillamentum Nylon CF15 @DQ2;Wax-Alike MoldLay @DQ2;Prusament PA11 Carbon Fiber @DQ2;Prusament PC Blend Carbon Fiber @DQ2;Prusament PETG @DQ2;Fiberlogy Nylon PA12+CF15 @DQ2;Fiberlogy Nylon PA12+GF15 @DQ2;Prusament PVB @DQ2;Prusament PC Blend Carbon Fiber @DQ2 0.6 nozzle;Fiberlogy Nylon PA12+CF15 @DQ2 0.6 nozzle;Fiberlogy Nylon PA12+GF15 @DQ2 0.6 nozzle [printer_model:DQ2P] name = DeltiQ 2 Plus @@ -40,7 +49,7 @@ technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ - PLA - Generic;DeltiQ - PLA - ExtraFill (Fillamentum);DeltiQ - PETG - Generic;DeltiQ - PETG (Devil Design);DeltiQ - ABS - Generic;DeltiQ - ABS - ExtraFill (Fillamentum);DeltiQ - ASA - ExtraFill (Fillamentum);DeltiQ - ASA - ASA 275 (Spectrum);DeltiQ - CPE - HG100 (Fillamentum);DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle;DeltiQ - PETG (Devil Design) @0.25 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - PETG (Devil Design) @0.6 nozzle;DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle;DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle;DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle;DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle;DeltiQ - PETG (Devil Design) @0.8 nozzle;DeltiQ - PA - Nylon PA12 (Fiberlogy);DeltiQ - PA - Nylon CF15 Carbon (Fillamentum);DeltiQ - MoldLay (Wax-Alike) +default_materials = Generic PLA @DQ2;Prusament PLA @DQ2; Fillamentum PLA @DQ2;Generic PETG @DQ2;Devil Design PETG @DQ2;Generic ABS @DQ2;Fillamentum ABS @DQ2;Fillamentum ASA @DQ2;Spectrum ASA @DQ2;Fillamentum CPE HG100 @DQ2;Fillamentum PLA @DQ2 0.25 nozzle;Devil Design PETG @DQ2 0.25 nozzle;Prusament PLA @DQ2 0.6 nozzle;Fillamentum PLA @DQ2 0.6 nozzle;Devil Design PETG @DQ2 0.6 nozzle;Fillamentum ABS @DQ2 0.6 nozzle;Fillamentum ASA @DQ2 0.6 nozzle;Spectrum ASA @DQ2 0.6 nozzle;Fillamentum CPE HG100 @DQ2 0.6 nozzle;Prusament PLA @DQ2 0.8 nozzle;Fillamentum PLA @DQ2 0.8 nozzle;Devil Design PETG @DQ2 0.8 nozzle;Fiberlogy Nylon PA12 @DQ2;Fillamentum Nylon CF15 @DQ2;Wax-Alike MoldLay @DQ2;Prusament PA11 Carbon Fiber @DQ2;Prusament PC Blend Carbon Fiber @DQ2;Prusament PETG @DQ2;Fiberlogy Nylon PA12+CF15 @DQ2;Fiberlogy Nylon PA12+GF15 @DQ2;Prusament PVB @DQ2;Prusament PC Blend Carbon Fiber @DQ2 0.6 nozzle;Fiberlogy Nylon PA12+CF15 @DQ2 0.6 nozzle;Fiberlogy Nylon PA12+GF15 @DQ2 0.6 nozzle [printer_model:DQ2+FP2] name = DeltiQ 2 + FlexPrint 2 @@ -49,7 +58,7 @@ technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ FP2 - PLA - Generic;DeltiQ FP2 - PLA - ExtraFill (Fillamentum);DeltiQ FP2 - PETG - Generic;DeltiQ FP2 - PETG (Devil Design);DeltiQ FP2 - ABS - Generic;DeltiQ FP2 - ABS - ExtraFill (Fillamentum);DeltiQ FP2 - ASA - ExtraFill (Fillamentum);DeltiQ FP2 - CPE - HG100 (Fillamentum);DeltiQ FP2 - FLEX - Generic;DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 93A (SMARTFIL);DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum) +default_materials = Generic PLA @DQ2FP2;Prusament PLA @DQ2FP2;Fillamentum PLA @DQ2FP2;Generic PETG @DQ2FP2;Devil Design PETG @DQ2FP2;Generic ABS @DQ2FP2;Fillamentum ABS @DQ2FP2;Fillamentum ASA @DQ2FP2;Fillamentum CPE HG100;Generic FLEX @DQ2FP2;Fillamentum TPU 92A @DQ2FP2;Fillamentum TPU 98A @DQ2FP2;Smartfil TPU 93A @DQ2FP2;Fillamentum PEBA 90A @DQ2FP2;Fiberlogy PP @DQ2FP2;NinjaTek TPU 75D @DQ2FP2 [printer_model:DQ2P+FP2] name = DeltiQ 2 Plus + FlexPrint 2 @@ -58,7 +67,7 @@ technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ FP2 - PLA - Generic;DeltiQ FP2 - PLA - ExtraFill (Fillamentum);DeltiQ FP2 - PETG - Generic;DeltiQ FP2 - PETG (Devil Design);DeltiQ FP2 - ABS - Generic;DeltiQ FP2 - ABS - ExtraFill (Fillamentum);DeltiQ FP2 - ASA - ExtraFill (Fillamentum);DeltiQ FP2 - CPE - HG100 (Fillamentum);DeltiQ FP2 - FLEX - Generic;DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum);DeltiQ FP2 - TPU 93A (SMARTFIL);DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum) +default_materials = Generic PLA @DQ2FP2;Prusament PLA @DQ2FP2;Fillamentum PLA @DQ2FP2;Generic PETG @DQ2FP2;Devil Design PETG @DQ2FP2;Generic ABS @DQ2FP2;Fillamentum ABS @DQ2FP2;Fillamentum ASA @DQ2FP2;Fillamentum CPE HG100 @DQ2FP2;Generic FLEX @DQ2FP2;Fillamentum TPU 92A @DQ2FP2;Fillamentum TPU 98A @DQ2FP2;Smartfil TPU 93A @DQ2FP2;Fillamentum PEBA 90A @DQ2FP2;Fiberlogy PP @DQ2FP2;NinjaTek TPU 75D @DQ2FP2 [printer_model:DQ2+FP] name = DeltiQ 2 + FlexPrint @@ -67,7 +76,7 @@ technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ FP - PLA - Generic;DeltiQ FP - PLA - ExtraFill (Fillamentum);DeltiQ FP - PETG - Generic;DeltiQ FP - PETG (Devil Design);DeltiQ FP - ABS - Generic;DeltiQ FP - ABS - ExtraFill (Fillamentum);DeltiQ FP - ASA - ExtraFill (Fillamentum);DeltiQ FP - CPE - HG100 (Fillamentum);DeltiQ FP - FLEX - Generic +default_materials = Generic PLA @DQ2FP;Prusament PLA @DQ2FP;Fillamentum PLA @DQ2FP;Generic PETG @DQ2FP;Devil Design PETG @DQ2FP;Generic ABS @DQ2FP;Fillamentum ABS @DQ2FP;Fillamentum ASA @DQ2FP;Fillamentum CPE HG100 @DQ2FP;Generic FLEX @DQ2FP [printer_model:DQ2P+FP] name = DeltiQ 2 Plus + FlexPrint @@ -76,32 +85,33 @@ technology = FFF family = DeltiQ 2 bed_model = dq2_bed.stl bed_texture = dq2_bed_texture.svg -default_materials = DeltiQ FP - PLA - Generic;DeltiQ FP - PLA - ExtraFill (Fillamentum);DeltiQ FP - PETG - Generic;DeltiQ FP - PETG (Devil Design);DeltiQ FP - ABS - Generic;DeltiQ FP - ABS - ExtraFill (Fillamentum);DeltiQ FP - ASA - ExtraFill (Fillamentum);DeltiQ FP - CPE - HG100 (Fillamentum);DeltiQ FP - FLEX - Generic +default_materials = Generic PLA @DQ2FP;Prusament PLA @DQ2FP;Fillamentum PLA @DQ2FP;Generic PETG @DQ2FP;Devil Design PETG @DQ2FP;Generic ABS @DQ2FP;Fillamentum ABS @DQ2FP;Fillamentum ASA @DQ2FP;Fillamentum CPE HG100 @DQ2FP;Generic FLEX @DQ2FP [printer_model:DQM] name = DeltiQ M variants = 0.4 technology = FFF family = DeltiQ -default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE +default_materials = PLA @DQ;ASA @DQ;PET @DQ;ABS @DQ;CPE @DQ [printer_model:DQL] name = DeltiQ L variants = 0.4 technology = FFF family = DeltiQ -default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE +default_materials = PLA @DQ;ASA @DQ;PET @DQ;ABS @DQ;CPE @DQ [printer_model:DQXL] name = DeltiQ XL variants = 0.4 technology = FFF family = DeltiQ -default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE +default_materials = PLA @DQ;ASA @DQ;PET @DQ;ABS @DQ;CPE @DQ # DeltiQ print styles # -[print:DeltiQ 0.20mm Normal] +[print:0.20mm Normal @DQ] +renamed_from = "DeltiQ 0.20mm Normal" avoid_crossing_perimeters = 0 bottom_fill_pattern = monotonic bottom_solid_layers = 4 @@ -118,7 +128,7 @@ complete_objects = 0 default_acceleration = 2000 dont_support_bridges = 0 draft_shield = 0 -elefant_foot_compensation = 0.0 +elefant_foot_compensation = 0.1 ensure_vertical_shell_thickness = 0 external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 30 @@ -158,7 +168,7 @@ min_skirt_length = 4 notes = only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 -output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}_{timestamp}.gcode +output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{filament_notes[0]}_{print_time}_{round(total_weight)}g_{year}{zdigits(month, 2)}{zdigits(day, 2)}-{zdigits(hour, 2)}{zdigits(minute, 2)}.gcode overhangs = 1 perimeter_acceleration = 1500 perimeter_extruder = 1 @@ -169,14 +179,14 @@ post_process = print_settings_id = raft_layers = 0 resolution = 0 -seam_position = nearest +seam_position = aligned single_extruder_multi_material_priming = 0 skirt_distance = 3 skirt_height = 2 skirts = 1 slice_closing_radius = 0.049 small_perimeter_speed = 20 -solid_infill_below_area = 70 +solid_infill_below_area = 20 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 @@ -219,9 +229,13 @@ wipe_tower_width = 60 wipe_tower_x = 180 wipe_tower_y = 140 xy_size_compensation = 0 +max_volumetric_extrusion_rate_slope_negative = 1.3 +thick_bridges = 0 -[print:DeltiQ 0.10mm Detail] -inherits = DeltiQ 0.20mm Normal + +[print:0.10mm Detail @DQ] +renamed_from = "DeltiQ 0.10mm Detail" +inherits = 0.20mm Normal @DQ bottom_solid_layers = 7 bottom_solid_min_thickness = 0.7 bridge_flow_ratio = 0.7 @@ -235,8 +249,9 @@ top_infill_extrusion_width = 0.4 fill_pattern = grid fill_density = 20% -[print:DeltiQ 0.15mm Normal] -inherits = DeltiQ 0.20mm Normal +[print:0.15mm Normal @DQ] +renamed_from = "DeltiQ 0.15mm Normal" +inherits = 0.20mm Normal @DQ bottom_solid_layers = 5 bottom_solid_min_thickness = 0.7 bridge_flow_ratio = 0.7 @@ -249,8 +264,9 @@ top_solid_min_thickness = 0.7 fill_pattern = grid fill_density = 20% -[print:DeltiQ 0.20mm Vase] -inherits = DeltiQ 0.20mm Normal +[print:0.20mm Vase @DQ] +renamed_from = "DeltiQ 0.20mm Vase" +inherits = 0.20mm Normal @DQ perimeters = 1 top_solid_layers = 0 fill_density = 0 @@ -259,8 +275,9 @@ spiral_vase = 1 ensure_vertical_shell_thickness = 1 thin_walls = 0 -[print:DeltiQ 0.20mm FLEX] -inherits = DeltiQ 0.20mm Normal +[print:0.20mm FLEX @DQ] +renamed_from = "DeltiQ 0.20mm FLEX" +inherits = 0.20mm Normal @DQ avoid_crossing_perimeters = 0 bridge_flow_ratio = 0.80 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT.*/ and nozzle_diameter[0]==0.4 @@ -291,8 +308,9 @@ travel_speed = 200 max_print_speed = 40 complete_objects = 1 -[print:DeltiQ 0.07mm Quality @0.25 nozzle] -inherits = DeltiQ 0.20mm Normal +[print:0.07mm Quality @DQ2 0.25 nozzle] +renamed_from = "DeltiQ 0.07mm Quality @0.25 nozzle" +inherits = 0.20mm Normal @DQ bottom_solid_layers = 6 bottom_solid_min_thickness = 0.5 bridge_speed = 60 @@ -317,13 +335,15 @@ top_solid_layers = 6 top_solid_min_thickness = 0.5 thin_walls = 1 -[print:DeltiQ 0.20mm Normal @0.25 nozzle] -inherits = DeltiQ 0.07mm Quality @0.25 nozzle +[print:0.20mm Normal @DQ2 0.25 nozzle] +renamed_from = "DeltiQ 0.20mm Normal @0.25 nozzle" +inherits = 0.07mm Quality @DQ2 0.25 nozzle first_layer_height = 0.2 layer_height = 0.2 -[print:DeltiQ 0.30mm Normal @0.6 nozzle] -inherits = DeltiQ 0.20mm Normal +[print:0.30mm Normal @DQ2 0.6 nozzle] +renamed_from = "DeltiQ 0.30mm Normal @0.6 nozzle" +inherits = 0.20mm Normal @DQ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.6 external_perimeter_extrusion_width = 0.68 extrusion_width = 0.65 @@ -338,25 +358,29 @@ support_material_extrusion_width = 0.55 support_material_interface_spacing = 0.6 support_material_xy_spacing = 0.9 top_infill_extrusion_width = 0.6 +elefant_foot_compensation = 0.2 -[print:DeltiQ 0.30mm Strong @0.6 nozzle] -inherits = DeltiQ 0.30mm Normal @0.6 nozzle +[print:0.30mm Strong @DQ2 0.6 nozzle] +renamed_from = "DeltiQ 0.30mm Strong @0.6 nozzle" +inherits = 0.30mm Normal @DQ2 0.6 nozzle fill_density = 50% perimeters = 3 -[print:DeltiQ 0.35mm Fast @0.6 nozzle] -inherits = DeltiQ 0.30mm Normal @0.6 nozzle +[print:0.35mm Fast @DQ2 0.6 nozzle] +renamed_from = "DeltiQ 0.35mm Fast @0.6 nozzle" +inherits = 0.30mm Normal @DQ2 0.6 nozzle fill_density = 10% layer_height = 0.35 -[print:DeltiQ 0.40mm Normal @0.8 nozzle] -inherits = DeltiQ 0.20mm Normal +[print:0.40mm Normal @DQ2 0.8 nozzle] +renamed_from = "DeltiQ 0.40mm Normal @0.8 nozzle" +inherits = 0.20mm Normal @DQ bottom_solid_layers = 3 bottom_solid_min_thickness = 1.2 bridge_flow_ratio = 0.90 bridge_speed = 20 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.8 -elefant_foot_compensation = 0.0 +elefant_foot_compensation = 0.2 external_perimeter_extrusion_width = 0.80 external_perimeter_speed = 30 extrusion_width = 0.80 @@ -384,8 +408,9 @@ top_solid_infill_speed = 40 top_solid_layers = 4 top_solid_min_thickness = 1.2 -[print:DeltiQ 0.40mm Vase @0.8 nozzle] -inherits = DeltiQ 0.40mm Normal @0.8 nozzle +[print:0.40mm Vase @DQ2 0.8 nozzle] +renamed_from = "DeltiQ 0.40mm Vase @0.8 nozzle" +inherits = 0.40mm Normal @DQ2 0.8 nozzle bottom_solid_layers = 4 perimeters = 1 top_solid_layers = 0 @@ -397,154 +422,45 @@ thin_walls = 0 # AzteQ print styles # -[print:AzteQ Industrial 0.20mm Normal] -avoid_crossing_perimeters = 0 -avoid_crossing_perimeters_max_detour = 0 -bottom_fill_pattern = monotonic -bottom_solid_layers = 4 -bottom_solid_min_thickness = 0.7 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 30 -brim_width = 0 -clip_multipart_objects = 1 +[print:0.20mm Normal @AQ] +renamed_from = "AzteQ Industrial 0.20mm Normal" +inherits = 0.20mm Normal @DQ compatible_printers = -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4 -complete_objects = 0 -default_acceleration = 2000 -dont_support_bridges = 0 -draft_shield = 0 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 0 -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 30 -external_perimeters_first = 0 -extra_perimeters = 0 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and ( printer_notes=~/.*PRINTER_MODEL_AQI.*/ or printer_notes=~/.*PRINTER_MODEL_AQD.*/ ) and nozzle_diameter[0]==0.4 extruder_clearance_height = 65 extruder_clearance_radius = 65 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = grid -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 20 -gap_fill_speed = 40 -gcode_comments = 0 -gcode_label_objects = 0 -infill_acceleration = 2000 -infill_anchor = 600% -infill_anchor_max = 50 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -inherits = -interface_shells = 0 -ironing = 0 -ironing_flowrate = 15% -ironing_spacing = 0.1 -ironing_speed = 15 -ironing_type = top -layer_height = 0.2 -max_print_speed = 60 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{layer_height}mm_{print_time}_{timestamp}.gcode -overhangs = 1 -perimeter_acceleration = 1500 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 45 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -single_extruder_multi_material_priming = 0 -skirt_distance = 10 -skirt_height = 2 -skirts = 1 -slice_closing_radius = 0.049 -small_perimeter_speed = 20 -solid_infill_below_area = 70 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 60 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 30 -support_material_auto = 1 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.1 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 4 -support_material_interface_spacing = 0.4 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 40 -support_material_with_sheath = 0 -support_material_xy_spacing = 0.6 -thin_walls = 0 -threads = 12 -top_fill_pattern = monotonic -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 40 -top_solid_layers = 5 -top_solid_min_thickness = 0.7 travel_speed = 200 -wipe_tower = 0 -wipe_tower_bridging = 10 -wipe_tower_no_sparse_layers = 0 -wipe_tower_rotation_angle = 0 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 -[print:AzteQ Industrial 0.15mm Detail] -inherits = AzteQ Industrial 0.20mm Normal +[print:0.15mm Detail @AQ] +renamed_from = "AzteQ Industrial 0.15mm Detail" +inherits = 0.20mm Normal @AQ layer_height = 0.15 -[print:AzteQ Industrial 0.20mm Strong] -inherits = AzteQ Industrial 0.20mm Normal +[print:0.20mm Strong @AQ] +renamed_from = "AzteQ Industrial 0.20mm Strong" +inherits = 0.20mm Normal @AQ fill_density = 50% perimeters = 3 -[print:AzteQ Industrial 0.20mm Vase] -inherits = AzteQ Industrial 0.20mm Normal +[print:0.20mm Vase @AQ] +renamed_from = "AzteQ Industrial 0.20mm Vase" +inherits = 0.20mm Normal @AQ ensure_vertical_shell_thickness = 1 fill_density = 0% perimeters = 1 spiral_vase = 1 top_solid_layers = 0 -[print:AzteQ Industrial 0.25mm Fast] -inherits = AzteQ Industrial 0.20mm Normal +[print:0.25mm Fast @AQ] +renamed_from = "AzteQ Industrial 0.25mm Fast" +inherits = 0.20mm Normal @AQ fill_density = 10% layer_height = 0.25 -[print:AzteQ Industrial 0.30mm Normal @0.6 nozzle] -inherits = AzteQ Industrial 0.20mm Normal -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +[print:0.30mm Normal @AQ 0.6 nozzle] +renamed_from = "AzteQ Industrial 0.30mm Normal @0.6 nozzle" +inherits = 0.20mm Normal @AQ +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and ( printer_notes=~/.*PRINTER_MODEL_AQI.*/ or printer_notes=~/.*PRINTER_MODEL_AQD.*/ ) and nozzle_diameter[0]==0.6 external_perimeter_extrusion_width = 0.68 extrusion_width = 0.65 first_layer_extrusion_width = 0.65 @@ -558,46 +474,223 @@ support_material_extrusion_width = 0.55 support_material_interface_spacing = 0.6 support_material_xy_spacing = 0.9 top_infill_extrusion_width = 0.6 +elefant_foot_compensation = 0.2 -[print:AzteQ Industrial 0.30mm Strong @0.6 nozzle] -inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle +[print:0.30mm Strong @AQ 0.6 nozzle] +renamed_from = "AzteQ Industrial 0.30mm Strong @0.6 nozzle" +inherits = 0.30mm Normal @AQ 0.6 nozzle fill_density = 50% perimeters = 3 -[print:AzteQ Industrial 0.35mm Fast @0.6 nozzle] -inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle +[print:0.35mm Fast @AQ 0.6 nozzle] +renamed_from = "AzteQ Industrial 0.35mm Fast @0.6 nozzle" +inherits = 0.30mm Normal @AQ 0.6 nozzle fill_density = 10% layer_height = 0.35 +[print:0.40mm Normal @AQ 0.8 nozzle] +renamed_from = "AzteQ Industrial 0.40mm Normal @0.8 nozzle" +inherits = 0.20mm Normal @AQ +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and ( printer_notes=~/.*PRINTER_MODEL_AQI.*/ or printer_notes=~/.*PRINTER_MODEL_AQD.*/ ) and nozzle_diameter[0]==0.8 +bottom_solid_layers = 4 +bottom_solid_min_thickness = 0.7 +bridge_flow_ratio = 0.95 +bridge_speed = 30 +dont_support_bridges = 0 +elefant_foot_compensation = 0.2 +ensure_vertical_shell_thickness = 0 +external_perimeter_extrusion_width = 0.8 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extrusion_width = 0.8 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_extrusion_width = 0.8 +first_layer_height = 0.4 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +gap_fill_enabled = 1 +gap_fill_speed = 40 +infill_extrusion_width = 0.8 +infill_first = 0 +infill_overlap = 25% +infill_speed = 60 +layer_height = 0.4 +max_print_speed = 60 +max_volumetric_speed = 0 +only_retract_when_crossing_perimeters = 1 +overhangs = 1 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.8 +perimeter_speed = 45 +perimeters = 2 +raft_contact_distance = 0.1 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +skirt_height = 2 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 20 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.8 +solid_infill_speed = 60 +support_material = 0 +support_material_angle = 30 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = -1 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.1 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.8 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 4 +support_material_interface_pattern = auto +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 40 +support_material_with_sheath = 0 +support_material_xy_spacing = 0.6 +thick_bridges = 1 +thin_walls = 0 +threads = 12 +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.8 +top_solid_infill_speed = 40 +top_solid_layers = 5 +top_solid_min_thickness = 0.7 +travel_speed = 200 +travel_speed_z = 0 + +[print:0.40mm Vase @AQ 0.8 nozzle] +renamed_from = "AzteQ Industrial 0.40mm Vase @0.8 nozzle" +inherits = 0.40mm Normal @AQ 0.8 nozzle +bottom_solid_layers = 4 +perimeters = 1 +top_solid_layers = 0 +fill_density = 0 +support_material = 0 +spiral_vase = 1 +ensure_vertical_shell_thickness = 1 +thin_walls = 0 + # DeltiQ filaments # -[filament:*DeltiQ common*] +[filament:*DQ2 0.4*] compatible_printers = compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.4 disable_fan_first_layers = 3 extrusion_multiplier = 1 -filament_colour = #FF0000 +filament_colour = #EC626F filament_diameter = 1.75 filament_minimal_purge_on_wipe_tower = 15 -filament_notes = "" filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" filament_settings_id = "" filament_soluble = 0 filament_toolchange_delay = 0 start_filament_gcode = "; FILAMENT_START_GCODE" end_filament_gcode = "; FILAMENT_END_GCODE" +filament_cost = 0 +filament_spool_weight = 250 filament_vendor = Generic +filament_notes = "LP-CU" + +[filament:*DQ2 0.4X*] +inherits = *DQ2 0.4* +filament_notes = "MV-DG" + +[filament:*DQ2 0.25*] +inherits = *DQ2 0.4* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25 +filament_notes = "JW" + +[filament:*DQ2 0.6*] +inherits = *DQ2 0.4* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 +filament_notes = "BN" +filament_max_volumetric_speed = 15 + +[filament:*DQ2 0.6X*] +inherits = *DQ2 0.6* +filament_notes = "SL" + +[filament:*DQ2 0.8*] +inherits = *DQ2 0.4* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 +filament_notes = "ZL" +filament_max_volumetric_speed = 15 + +[filament:*DQ2FP 0.4*] +inherits = *DQ2 0.4* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 + +[filament:*DQ2FP2 0.4*] +inherits = *DQ2FP 0.4* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 + +[filament:*AQI 0.4*] +inherits = *DQ2 0.4* +start_filament_gcode = "; FILAMENT_START_GCODE" +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4 +filament_notes = "CU" +filament_max_volumetric_speed = 15 + +[filament:*AQI 0.4X*] +inherits = *AQI 0.4* +filament_notes = "DG" + +[filament:*AQI 0.6*] +inherits = *AQI 0.4* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 +filament_notes = "BN" + +[filament:*AQI 0.6X*] +inherits = *AQI 0.6* +filament_notes = "SL" + +[filament:*AQI 0.8*] +inherits = *AQI 0.4* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.8 +filament_notes = "ZL" + +[filament:*AQD 0.4*] +inherits = *AQI 0.4* +start_filament_gcode = "; FILAMENT_START_GCODE" +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQD.*/ and nozzle_diameter[0]==0.4 + +[filament:*AQD 0.6*] +inherits = *AQD 0.4* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQD.*/ and nozzle_diameter[0]==0.6 +filament_notes = "BN" + +[filament:*AQD 0.8*] +inherits = *AQD 0.4* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQD.*/ and nozzle_diameter[0]==0.8 +filament_notes = "ZL" # DeltiQ PLA filaments # -[filament:DeltiQ - PLA - Generic] -inherits = *DeltiQ common* +[filament:Generic PLA @DQ2] +renamed_from = "DeltiQ - PLA - Generic" +inherits = *DQ2 0.4* bed_temperature = 55 bridge_fan_speed = 100 cooling = 1 fan_always_on = 1 fan_below_layer_time = 100 -filament_cost = 750 filament_density = 1.24 filament_max_volumetric_speed = 8 filament_retract_before_travel = 2 @@ -616,24 +709,59 @@ min_print_speed = 10 slowdown_below_layer_time = 4 temperature = 215 -[filament:DeltiQ - PLA - ExtraFill (Fillamentum)] -inherits = DeltiQ - PLA - Generic -filament_cost = 750 +[filament:Generic PLA @DQ2FP] +renamed_from = "DeltiQ FP - PLA - Generic" +inherits = Generic PLA @DQ2; *DQ2FP 0.4* +filament_retract_length = 0.7 +filament_retract_speed = 28 + +[filament:Prusament PLA @DQ2] +renamed_from = "DeltiQ - PLA - Prusament (Prusa Polymers)" +inherits = Generic PLA @DQ2 +bed_temperature = 50 +bridge_fan_speed = 100 +cooling = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_cost = 29.99 filament_density = 1.24 -filament_vendor = Fillamentum +filament_deretract_speed = nil +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 2 +filament_retract_before_wipe = 90% +filament_retract_layer_change = 1 +filament_retract_length = 4.2 +filament_retract_lift = 0.2 +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = 30 +filament_spool_weight = 201 +filament_vendor = Prusa Polymers +filament_wipe = 1 +first_layer_bed_temperature = 50 +first_layer_temperature = 220 +full_fan_speed_layer = 0 +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +slowdown_below_layer_time = 4 +temperature = 220 -[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle] -inherits = DeltiQ - PLA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25 +[filament:Prusament PLA @DQ2 0.6 nozzle] +renamed_from = "DeltiQ - PLA - Prusament (Prusa Polymers) @0.6 nozzle" +inherits = Prusament PLA @DQ2; *DQ2 0.6* +filament_max_volumetric_speed = 12 +extrusion_multiplier = 1.02 +first_layer_temperature = 230 +temperature = 230 +filament_retract_before_wipe = 100% +filament_retract_length = 3.8 -[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle] -inherits = DeltiQ - PLA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 - -[filament:DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle] -inherits = DeltiQ - PLA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 +[filament:Prusament PLA @DQ2 0.8 nozzle] +renamed_from = "DeltiQ - PLA - Prusament (Prusa Polymers) @0.8 nozzle" +inherits = Prusament PLA @DQ2; *DQ2 0.8* disable_fan_first_layers = 1 filament_max_volumetric_speed = 40 first_layer_temperature = 230 @@ -644,34 +772,158 @@ filament_retract_length = 4.1 filament_retract_speed = 45 filament_deretract_speed = 25 -[filament:DeltiQ FP - PLA - Generic] -inherits = DeltiQ - PLA - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 -filament_retract_length = 0.7 -filament_retract_speed = 28 +[filament:Prusament PLA (Door Opened) @AQI] +inherits = Prusament PLA @DQ2; *AQI 0.4* +first_layer_bed_temperature = 55 +bed_temperature = 55 +first_layer_temperature = 230 +temperature = 230 +filament_retract_before_wipe = 90% +filament_retract_length = 3.7 +filament_retract_speed = 29 +min_fan_speed = 100 +fan_below_layer_time = 20 +min_print_speed = 18 +slowdown_below_layer_time = 1 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Wait for chamber temperature" -[filament:DeltiQ FP - PLA - ExtraFill (Fillamentum)] -inherits = DeltiQ FP - PLA - Generic +[filament:Prusament PLA (Door Opened) @AQD] +inherits = Prusament PLA (Door Opened) @AQI; *AQD 0.4* -[filament:DeltiQ FP2 - PLA - Generic] -inherits = DeltiQ FP - PLA - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +[filament:Fillamentum PLA @DQ2] +renamed_from = "DeltiQ - PLA - ExtraFill (Fillamentum)" +inherits = Generic PLA @DQ2; *DQ2 0.4* +filament_cost = 24.27 +filament_spool_weight = 229 +filament_density = 1.24 +filament_vendor = Fillamentum + +[filament:Fillamentum PLA @DQ2 0.25 nozzle] +renamed_from = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle" +inherits = Fillamentum PLA @DQ2; *DQ2 0.25* + +[filament:Fillamentum PLA @DQ2 0.6 nozzle] +renamed_from = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle" +inherits = Fillamentum PLA @DQ2; *DQ2 0.6* +filament_max_volumetric_speed = 15 + +[filament:Fillamentum PLA @DQ2 0.8 nozzle] +renamed_from = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle" +inherits = Fillamentum PLA @DQ2; *DQ2 0.8* +disable_fan_first_layers = 1 +filament_max_volumetric_speed = 40 +first_layer_temperature = 230 +slowdown_below_layer_time = 8 +temperature = 230 +filament_retract_layer_change = 0 +filament_retract_length = 4.1 +filament_retract_speed = 45 +filament_deretract_speed = 25 + +[filament:Prusament PVB @DQ2] +inherits = Generic PLA @DQ2; *DQ2 0.4* +filament_type = PVB +filament_vendor = Prusa Polymers +filament_spool_weight = 201 +bed_temperature = 75 +first_layer_bed_temperature = 75 +first_layer_temperature = 215 +extrusion_multiplier = 0.95 +filament_retract_before_wipe = 0% +filament_retract_length = 4.1 +filament_wipe = 0 +min_print_speed = 15 +slowdown_below_layer_time = 2 +filament_cost = 41.3 + + +[filament:Fillamentum PLA @DQ2FP] +renamed_from = "DeltiQ FP - PLA - ExtraFill (Fillamentum)" +inherits = Generic PLA @DQ2; *DQ2FP 0.4* +filament_cost = 24.27 +filament_spool_weight = 229 +filament_density = 1.24 +filament_vendor = Fillamentum + +[filament:Generic PLA @DQ2FP2] +renamed_from = "DeltiQ FP2 - PLA - Generic" +inherits = Generic PLA @DQ2FP; *DQ2FP2 0.4* filament_retract_length = 1.2 filament_retract_speed = 28 -[filament:DeltiQ FP2 - PLA - ExtraFill (Fillamentum)] -inherits = DeltiQ FP2 - PLA - Generic +[filament:Prusament PLA @DQ2FP2] +renamed_from = "DeltiQ FP2 - PLA - Prusament (Prusa Polymers)" +inherits = Generic PLA @DQ2FP2; *DQ2FP2 0.4* +bed_temperature = 55 +bridge_fan_speed = 100 +cooling = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_cost = 550 +filament_density = 1.24 +filament_deretract_speed = nil +filament_max_volumetric_speed = 8 +filament_retract_before_travel = 2 +filament_retract_before_wipe = 90% +filament_retract_layer_change = 1 +filament_retract_length = 1.2 +filament_retract_lift = 0.2 +filament_retract_lift_above = nil +filament_retract_lift_below = nil +filament_retract_restart_extra = nil +filament_retract_speed = 28 +filament_spool_weight = 201 +filament_vendor = Prusa Polymers +filament_wipe = 1 +first_layer_bed_temperature = 55 +first_layer_temperature = 215 +full_fan_speed_layer = 0 +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 10 +slowdown_below_layer_time = 4 +temperature = 215 + +[filament:Fillamentum PLA @DQ2FP2] +renamed_from = "DeltiQ FP2 - PLA - ExtraFill (Fillamentum)" +inherits = Generic PLA @DQ2FP2; *DQ2FP2 0.4* +filament_cost = 24.27 +filament_spool_weight = 229 +filament_density = 1.24 +filament_vendor = Fillamentum + + +[filament:Fiberlogy PP @DQ2FP2] +inherits = Generic PLA @DQ2FP2; *DQ2FP2 0.4* +filament_type = PP +filament_vendor = Fiberlogy +filament_density = 1.04 +first_layer_bed_temperature = 0 +bed_temperature = 0 +first_layer_temperature = 230 +temperature = 230 +extrusion_multiplier = 0.91 +bridge_fan_speed = 75 +disable_fan_first_layers = 5 +max_fan_speed = 50 +min_fan_speed = 15 +fan_below_layer_time = 20 +min_print_speed = 15 +slowdown_below_layer_time = 2 +filament_retract_length = 0.8 +filament_cost = 54.36 # DeltiQ PETG filaments # -[filament:DeltiQ - PETG - Generic] -inherits = *DeltiQ common* +[filament:Generic PETG @DQ2] +renamed_from = "DeltiQ - PETG - Generic" +inherits = *DQ2 0.4* bed_temperature = 80 bridge_fan_speed = 50 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 480 filament_density = 1.27 filament_deretract_speed = 25 filament_max_volumetric_speed = 8 @@ -691,29 +943,37 @@ min_print_speed = 10 slowdown_below_layer_time = 5 temperature = 245 -[filament:DeltiQ - PETG (Devil Design)] -inherits = DeltiQ - PETG - Generic -filament_cost = 480 -filament_density = 1.27 +[filament:Devil Design PETG @DQ2] +renamed_from = "DeltiQ - PETG (Devil Design)" +inherits = Generic PETG @DQ2; *DQ2 0.6* filament_vendor = DevilDesign +filament_spool_weight = 247 +filament_density = 1.27 +filament_cost = 16.53 -[filament:DeltiQ - PETG (Devil Design) @0.25 nozzle] -inherits = DeltiQ - PETG (Devil Design) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.25 +[filament:Devil Design PETG @DQ2 0.25 nozzle] +renamed_from = "DeltiQ - PETG (Devil Design) @0.25 nozzle" +inherits = Devil Design PETG @DQ2; *DQ2 0.25* first_layer_temperature = 225 temperature = 220 max_fan_speed = 65 min_fan_speed = 40 bridge_fan_speed = 100 -[filament:DeltiQ - PETG (Devil Design) @0.6 nozzle] -inherits = DeltiQ - PETG (Devil Design) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 +[filament:Devil Design PETG @DQ2 0.6 nozzle] +renamed_from = "DeltiQ - PETG (Devil Design) @0.6 nozzle" +inherits = Devil Design PETG @DQ2; *DQ2 0.6* filament_max_volumetric_speed = 15 +bridge_fan_speed = 70 +min_fan_speed = 35 +extrusion_multiplier = 1.025 +first_layer_temperature = 255 +temperature = 255 +filament_wipe = 0 -[filament:DeltiQ - PETG (Devil Design) @0.8 nozzle] -inherits = DeltiQ - PETG (Devil Design) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.8 +[filament:Devil Design PETG @DQ2 0.8 nozzle] +renamed_from = "DeltiQ - PETG (Devil Design) @0.8 nozzle" +inherits = Devil Design PETG @DQ2; *DQ2 0.8* filament_max_volumetric_speed = 40 first_layer_temperature = 240 slowdown_below_layer_time = 8 @@ -725,35 +985,93 @@ filament_deretract_speed = 25 filament_retract_before_wipe = 80% filament_wipe = 1 -[filament:DeltiQ FP - PETG - Generic] -inherits = DeltiQ - PETG - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +[filament:Prusament PETG @DQ2] +inherits = Generic PETG @DQ2; *DQ2 0.4* +filament_vendor = Prusa Polymers +filament_spool_weight = 201 +filament_density = 1.27 +first_layer_temperature = 235 +temperature = 230 +filament_retract_length = 4.4 +filament_cost = 29.99 + +[filament:Prusament PETG @AQI] +inherits = Prusament PETG @DQ2; *AQI 0.4* +bridge_fan_speed = 100 +max_fan_speed = 80 +min_fan_speed = 15 +min_print_speed = 15 +slowdown_below_layer_time = 3 +first_layer_temperature = 250 +temperature = 250 +filament_retract_before_travel = 2.5 +filament_retract_before_wipe = 100% +filament_retract_length = 4 +filament_retract_speed = 30 + +[filament:Prusament PETG @AQD] +inherits = Prusament PETG @AQI; *AQD 0.4* + +[filament:Prusament PETG Carbon Fiber @AQI] +inherits = Prusament PETG @AQI; *AQI 0.4* +filament_vendor = Prusa Polymers +filament_type = PETGCF +filament_density = 1.27 +first_layer_temperature = 275 +temperature = 275 +bed_temperature = 85 +first_layer_bed_temperature = 85 +extrusion_multiplier = 0.95 +bridge_fan_speed = 90% +min_fan_speed = 55 +min_print_speed = 18 +slowdown_below_layer_time = 2 +filament_retract_before_wipe = 50% +filament_retract_length = 3.5 +filament_cost = 45.45 + +[filament:Prusament PETG Carbon Fiber @AQD] +inherits = Prusament PETG Carbon Fiber @AQI; *AQD 0.4* + +[filament:Generic PETG @DQ2FP] +renamed_from = "DeltiQ FP - PETG - Generic" +inherits = Generic PETG @DQ2; *DQ2FP 0.4* filament_retract_length = 0.7 filament_retract_speed = 25 -[filament:DeltiQ FP - PETG (Devil Design)] -inherits = DeltiQ FP - PETG - Generic +[filament:Devil Design PETG @DQ2FP] +renamed_from = "DeltiQ FP - PETG (Devil Design)" +inherits = Generic PETG @DQ2FP; *DQ2FP 0.4* +filament_cost = 16.53 +filament_spool_weight = 247 +filament_density = 1.27 +filament_vendor = DevilDesign -[filament:DeltiQ FP2 - PETG - Generic] -inherits = DeltiQ FP - PETG - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +[filament:Generic PETG @DQ2FP2] +renamed_from = "DeltiQ FP2 - PETG - Generic" +inherits = Generic PETG @DQ2FP; *DQ2FP 0.4* filament_retract_length = 1.4 filament_retract_speed = 35 filament_retract_before_wipe = 0% -[filament:DeltiQ FP2 - PETG (Devil Design)] -inherits = DeltiQ FP2 - PETG - Generic +[filament:Devil Design PETG @DQ2FP2] +renamed_from = "DeltiQ FP2 - PETG (Devil Design)" +inherits = Generic PETG @DQ2FP2; *DQ2FP2 0.4* +filament_cost = 16.53 +filament_spool_weight = 247 +filament_density = 1.27 +filament_vendor = DevilDesign # DeltiQ ABS filaments # -[filament:DeltiQ - ABS - Generic] -inherits = *DeltiQ common* +[filament:Generic ABS @DQ2] +renamed_from = "DeltiQ - ABS - Generic" +inherits = *DQ2 0.4* bed_temperature = 100 bridge_fan_speed = 25 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 639 filament_density = 1.04 filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 @@ -772,70 +1090,84 @@ min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 255 -[filament:DeltiQ - ABS - ExtraFill (Fillamentum)] -inherits = DeltiQ - ABS - Generic -filament_cost = 639 +[filament:Fillamentum ABS @DQ2] +renamed_from = "DeltiQ - ABS - ExtraFill (Fillamentum)" +inherits = Generic ABS @DQ2; *DQ2 0.4* +filament_cost = 24.27 +filament_spool_weight = 229 filament_density = 1.04 filament_vendor = Fillamentum -[filament:DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle] -inherits = DeltiQ - ABS - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Fillamentum ABS @DQ2 0.6 nozzle] +renamed_from = "DeltiQ - ABS - ExtraFill (Fillamentum) @0.6 nozzle" +inherits = Fillamentum ABS @DQ2; *DQ2 0.6* -[filament:DeltiQ FP - ABS - Generic] -inherits = DeltiQ - ABS - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +[filament:Generic ABS @DQ2FP] +renamed_from = "DeltiQ FP - ABS - Generic" +inherits = Generic ABS @DQ2; *DQ2FP 0.4* filament_retract_length = 0.7 filament_retract_speed = 25 -[filament:DeltiQ FP - ABS - ExtraFill (Fillamentum)] -inherits = DeltiQ FP - ABS - Generic +[filament:Fillamentum ABS @DQ2FP] +renamed_from = "DeltiQ FP - ABS - ExtraFill (Fillamentum)" +inherits = Generic ABS @DQ2FP; *DQ2FP 0.4* +filament_cost = 24.27 +filament_spool_weight = 229 +filament_density = 1.04 +filament_vendor = Fillamentum -[filament:DeltiQ FP2 - ABS - Generic] -inherits = DeltiQ FP - ABS - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +[filament:Generic ABS @DQ2FP2] +renamed_from = "DeltiQ FP2 - ABS - Generic" +inherits = Generic ABS @DQ2FP; *DQ2FP2 0.4* filament_retract_length = 0.8 filament_retract_speed = 25 -[filament:DeltiQ FP2 - ABS - ExtraFill (Fillamentum)] -inherits = DeltiQ FP2 - ABS - Generic +[filament:Fillamentum ABS @DQ2FP2] +renamed_from = "DeltiQ FP2 - ABS - ExtraFill (Fillamentum)" +inherits = Generic ABS @DQ2FP2; *DQ2FP2 0.4* +filament_cost = 24.27 +filament_spool_weight = 229 +filament_density = 1.04 +filament_vendor = Fillamentum + # DeltiQ ASA filaments # -[filament:DeltiQ - ASA - ExtraFill (Fillamentum)] -inherits = DeltiQ - ABS - Generic -filament_cost = 739 +[filament:Fillamentum ASA @DQ2] +renamed_from = "DeltiQ - ASA - ExtraFill (Fillamentum)" +inherits = Generic ABS @DQ2; *DQ2 0.4* +filament_cost = 29.53 +filament_spool_weight = 229 filament_density = 1.07 filament_type = ASA filament_vendor = Fillamentum first_layer_temperature = 265 temperature = 265 -[filament:DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle] -inherits = DeltiQ - ASA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Fillamentum ASA @DQ2 0.6 nozzle] +renamed_from = "DeltiQ - ASA - ExtraFill (Fillamentum) @0.6 nozzle" +inherits = Fillamentum ASA @DQ2; *DQ2 0.6* -[filament:DeltiQ FP - ASA - ExtraFill (Fillamentum)] -inherits = DeltiQ - ASA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +[filament:Fillamentum ASA @DQ2FP] +renamed_from = "DeltiQ FP - ASA - ExtraFill (Fillamentum)" +inherits = Fillamentum ASA @DQ2; *DQ2FP2 0.4* filament_retract_length = 0.7 filament_retract_speed = 25 -[filament:DeltiQ FP2 - ASA - ExtraFill (Fillamentum)] -inherits = DeltiQ FP - ASA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +[filament:Fillamentum ASA @DQ2FP2] +renamed_from = "DeltiQ FP2 - ASA - ExtraFill (Fillamentum)" +inherits = Fillamentum ASA @DQ2FP; *DQ2FP2 0.4* -[filament:DeltiQ - ASA - ASA 275 (Spectrum)] -inherits = *DeltiQ common* +[filament:Spectrum ASA @DQ2] +renamed_from = "DeltiQ - ASA - ASA 275 (Spectrum)" +inherits = *DQ2 0.4* bed_temperature = 55 bridge_fan_speed = 80 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Spectrum -filament_cost = 587 +filament_cost = 29.86 filament_density = 1.07 filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 @@ -854,22 +1186,23 @@ min_print_speed = 10 slowdown_below_layer_time = 15 temperature = 230 -[filament:DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle] -inherits = DeltiQ - ASA - ASA 275 (Spectrum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Spectrum ASA @DQ2 0.6 nozzle] +renamed_from = "DeltiQ - ASA - ASA 275 (Spectrum) @0.6 nozzle" +inherits = Spectrum ASA @DQ2; *DQ2 0.6* # DeltiQ CPE filaments # -[filament:DeltiQ - CPE - HG100 (Fillamentum)] -inherits = *DeltiQ common* +[filament:Fillamentum CPE HG100 @DQ2] +renamed_from = "DeltiQ - CPE - HG100 (Fillamentum)" +inherits = *DQ2 0.4* bed_temperature = 90 bridge_fan_speed = 50 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Fillamentum -filament_cost = 1003 +filament_cost = 39.07 +filament_spool_weight = 229 filament_density = 1.25 filament_deretract_speed = 25 filament_max_volumetric_speed = 8 @@ -889,32 +1222,32 @@ min_print_speed = 10 slowdown_below_layer_time = 5 temperature = 260 -[filament:DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle] -inherits = DeltiQ - CPE - HG100 (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Fillamentum CPE HG100 @DQ2 0.6 nozzle] +renamed_from = "DeltiQ - CPE - HG100 (Fillamentum) @0.6 nozzle" +inherits = Fillamentum CPE HG100 @DQ2; *DQ2 0.6* -[filament:DeltiQ FP - CPE - HG100 (Fillamentum)] -inherits = DeltiQ - CPE - HG100 (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +[filament:Fillamentum CPE HG100 @DQ2FP] +renamed_from = "DeltiQ FP - CPE - HG100 (Fillamentum)" +inherits = Fillamentum CPE HG100 @DQ2; *DQ2FP 0.4* filament_retract_length = 0.7 filament_retract_speed = 25 filament_deretract_speed = 0 filament_retract_before_wipe = 0% -[filament:DeltiQ FP2 - CPE - HG100 (Fillamentum)] -inherits = DeltiQ FP - CPE - HG100 (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +[filament:Fillamentum CPE HG100 @DQ2FP2] +renamed_from = "DeltiQ FP2 - CPE - HG100 (Fillamentum)" +inherits = Fillamentum CPE HG100 @DQ2FP; *DQ2FP2 0.4* filament_retract_length = 0.8 filament_retract_speed = 35 filament_deretract_speed = 0 filament_retract_before_wipe = 0% + # DeltiQ FLEX filaments # -[filament:DeltiQ FP - FLEX - Generic] -inherits = *DeltiQ common* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT1.*/ and nozzle_diameter[0]==0.4 +[filament:Generic FLEX @DQ2FP] +renamed_from = "DeltiQ FP - FLEX - Generic" +inherits = *DQ2FP2 0.4* bed_temperature = 50 bridge_fan_speed = 80 cooling = 1 @@ -922,8 +1255,6 @@ disable_fan_first_layers = 1 extrusion_multiplier = 1.07 fan_always_on = 1 fan_below_layer_time = 20 -filament_vendor = Generic -filament_cost = 1870 filament_density = 1.22 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 @@ -944,9 +1275,9 @@ min_print_speed = 5 slowdown_below_layer_time = 4 temperature = 240 -[filament:DeltiQ FP2 - FLEX - Generic] -inherits = DeltiQ FP - FLEX - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 +[filament:Generic FLEX @DQ2FP2] +renamed_from = "DeltiQ FP2 - FLEX - Generic" +inherits = Generic FLEX @DQ2FP; *DQ2FP2 0.4* bed_temperature = 50 bridge_fan_speed = 80 cooling = 1 @@ -954,8 +1285,6 @@ disable_fan_first_layers = 1 extrusion_multiplier = 1.07 fan_always_on = 1 fan_below_layer_time = 20 -filament_vendor = Fillamentum -filament_cost = 1870 filament_density = 1.22 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 @@ -976,8 +1305,29 @@ min_print_speed = 5 slowdown_below_layer_time = 4 temperature = 225 -[filament:DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum)] -inherits = DeltiQ FP2 - FLEX - Generic +[filament:NinjaTek TPU 75D @DQ2FP2] +inherits = Generic FLEX @DQ2FP2; *DQ2FP2 0.4* +filament_vendor = NinjaTek +filament_type = TPU75D +first_layer_bed_temperature = 55 +bed_temperature = 55 +first_layer_temperature = 240 +temperature = 240 +extrusion_multiplier = 0.9 +filament_density = 1.1 +bridge_fan_speed = 90 +max_fan_speed = 70 +min_fan_speed = 50 +min_print_speed = 15 +slowdown_below_layer_time = 2 +filament_max_volumetric_speed = 5 +filament_retract_before_wipe = 95% +filament_retract_length = 1.4 +filament_cost = 91.67 + +[filament:Fillamentum TPU 92A @DQ2FP2] +renamed_from = "DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum)" +inherits = Generic FLEX @DQ2FP2; *DQ2FP2 0.4* bed_temperature = 50 bridge_fan_speed = 80 cooling = 1 @@ -986,7 +1336,8 @@ extrusion_multiplier = 1.10 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Fillamentum -filament_cost = 1870 +filament_cost = 58.33 +filament_spool_weight = 229 filament_density = 1.22 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 @@ -1007,10 +1358,12 @@ min_print_speed = 5 slowdown_below_layer_time = 4 temperature = 230 -[filament:DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum)] -inherits = DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum) +[filament:Fillamentum TPU 98A @DQ2FP2] +renamed_from = "DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum)" +inherits = Fillamentum TPU 92A @DQ2FP2; *DQ2FP2 0.4* extrusion_multiplier = 1.10 -filament_cost = 1870 +filament_cost = 58.33 +filament_spool_weight = 229 filament_density = 1.23 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 @@ -1019,8 +1372,9 @@ filament_retract_length = 2.5 filament_retract_speed = 20 filament_type = TPU98A -[filament:DeltiQ FP2 - TPU 93A (SMARTFIL)] -inherits = DeltiQ FP2 - FLEX - Generic +[filament:Smartfil TPU 93A @DQ2FP2] +renamed_from = "DeltiQ FP2 - TPU 93A (SMARTFIL)" +inherits = Generic FLEX @DQ2FP2; *DQ2FP2 0.4* bed_temperature = 50 bridge_fan_speed = 80 cooling = 1 @@ -1029,7 +1383,8 @@ extrusion_multiplier = 1.00 fan_always_on = 1 fan_below_layer_time = 10 filament_vendor = Smartfil -filament_cost = 1209 +filament_cost = 38.21 +filament_spool_weight = 250 filament_density = 1.21 filament_deretract_speed = nil filament_max_volumetric_speed = 2.5 @@ -1050,10 +1405,12 @@ min_print_speed = 10 slowdown_below_layer_time = 4 temperature = 235 -[filament:DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum)] -inherits = DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum) +[filament:Fillamentum PEBA 90A @DQ2FP2] +renamed_from = "DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum)" +inherits = Fillamentum TPU 98A @DQ2FP2; *DQ2FP2 0.4* extrusion_multiplier = 1.1 -filament_cost = 3578 +filament_cost = 139.67 +filament_spool_weight = 229 filament_density = 1.00 filament_max_volumetric_speed = 2.9 filament_retract_length = 0.0 @@ -1067,26 +1424,93 @@ first_layer_temperature = 245 bed_temperature = 75 temperature = 245 -[filament:DeltiQ - PA - Nylon PA12 (Fiberlogy)] -inherits = DeltiQ - ABS - Generic +[filament:Fiberlogy Nylon PA12 @DQ2] +renamed_from = "DeltiQ - PA - Nylon PA12 (Fiberlogy)" +inherits = Generic ABS @DQ2; *DQ2 0.4* +filament_type = PA +filament_vendor = Fiberlogy bed_temperature = 100 -filament_cost = 1213 +filament_spool_weight = 230 filament_density = 1.02 filament_retract_length = 4.1 -filament_type = NYLON first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 30 min_fan_speed = 20 temperature = 255 +filament_cost = 45.11 -[filament:DeltiQ - PA - Nylon CF15 Carbon (Fillamentum)] -inherits = DeltiQ - ABS - Generic +[filament:Fiberlogy Nylon PA12+CF15 @DQ2] +inherits = Fiberlogy Nylon PA12 @DQ2; *DQ2 0.4X* +filament_type = PACF +bridge_fan_speed = 15 +min_fan_speed = 5 +fan_always_on = 0 +fan_below_layer_time = 11 +slowdown_below_layer_time = 10 +extrusion_multiplier = 0.97 +first_layer_temperature = 260 +temperature = 260 +filament_retract_length = 4.15 +filament_retract_lift = 0.25 +filament_cost = 133.82 + +[filament:Fiberlogy Nylon PA12+CF15 @DQ2 0.6 nozzle] +inherits = Fiberlogy Nylon PA12+CF15 @DQ2; *DQ2 0.6X* +bridge_fan_speed = 50 +max_fan_speed = 40 +min_fan_speed = 20 +fan_always_on = 1 +fan_below_layer_time = 12 +min_print_speed = 15 +slowdown_below_layer_time = 3 +extrusion_multiplier = 1.075 +first_layer_temperature = 270 +temperature = 270 +filament_retract_length = 4 +filament_retract_lift = 0.2 +filament_retract_before_wipe = 90% + +[filament:Fiberlogy Nylon PA12+GF15 @DQ2] +inherits = Fiberlogy Nylon PA12 @DQ2; *DQ2 0.4X* +filament_type = PAGF +bridge_fan_speed = 15 +min_fan_speed = 5 +fan_always_on = 0 +fan_below_layer_time = 11 +slowdown_below_layer_time = 10 +extrusion_multiplier = 0.97 +first_layer_temperature = 260 +temperature = 260 +filament_retract_length = 4.15 +filament_retract_lift = 0.25 +filament_cost = 113.82 + +[filament:Fiberlogy Nylon PA12+GF15 @DQ2 0.6 nozzle] +inherits = Fiberlogy Nylon PA12+GF15 @DQ2; *DQ2 0.6X* +bridge_fan_speed = 50 +max_fan_speed = 40 +min_fan_speed = 20 +fan_always_on = 1 +fan_below_layer_time = 12 +min_print_speed = 15 +slowdown_below_layer_time = 3 +extrusion_multiplier = 1.075 +first_layer_temperature = 270 +temperature = 270 +filament_retract_length = 4 +filament_retract_lift = 0.2 +filament_retract_before_wipe = 90% + +[filament:Fillamentum Nylon CF15 @DQ2] +renamed_from = "DeltiQ - PA - Nylon CF15 Carbon (Fillamentum)" +inherits = Generic ABS @DQ2; *DQ2 0.4X* +filament_type = PACF bed_temperature = 100 -filament_cost = 2287 +filament_cost = 88.17 filament_density = 1.08 +filament_spool_weight = 229 filament_retract_length = 2.0 -filament_type = NYLON first_layer_bed_temperature = 100 first_layer_temperature = 255 max_fan_speed = 50 @@ -1094,10 +1518,106 @@ min_fan_speed = 20 temperature = 255 extrusion_multiplier = 0.95 -[filament:DeltiQ - MoldLay (Wax-Alike)] -inherits = DeltiQ - PLA - Generic +[filament:Prusament PA11 Carbon Fiber @DQ2] +renamed_from = "DeltiQ - PA - PA11 Carbon Fiber (Prusa Polymers)" +inherits = Generic ABS @DQ2; *DQ2 0.4X* +filament_type = PACF +bridge_fan_speed = 50 +disable_fan_first_layers = 5 +max_fan_speed = 50 +min_fan_speed = 0 +fan_always_on = 0 +fan_below_layer_time = 10 +min_print_speed = 15 +slowdown_below_layer_time = 5 +extrusion_multiplier = 1.02 +filament_cost = 82.64 +filament_density = 1.08 +filament_spool_weight = 201 +first_layer_temperature = 275 +temperature = 275 +filament_max_volumetric_speed = 6 +filament_vendor = Prusa Polymers +filament_retract_length = 2.5 + +[filament:Prusament PA11 Carbon Fiber @AQI] +inherits = Prusament PA11 Carbon Fiber @DQ2; *AQI 0.4X* +bridge_fan_speed = 30 +disable_fan_first_layers = 3 +max_fan_speed = 25 +min_fan_speed = 5 +fan_always_on = 1 +slowdown_below_layer_time = 2 +extrusion_multiplier = 1.05 +first_layer_temperature = 265 +temperature = 265 +filament_max_volumetric_speed = 8 +filament_retract_before_wipe = 100% +filament_retract_length = 2.9 +filament_retract_speed = 30 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature" + +[filament:Filament PM PAJet 160 @AQI] +inherits = Generic ABS @AQI; *AQI 0.4X* +filament_type = PA +filament_vendor = Filament PM +bridge_fan_speed = 80 +max_fan_speed = 50 +min_fan_speed = 20 +min_print_speed = 15 +slowdown_below_layer_time = 2 +extrusion_multiplier = 0.9 +first_layer_temperature = 245 +temperature = 245 +filament_retract_before_wipe = 100% +filament_retract_length = 6 +filament_retract_speed = 30 +filament_wipe = 0 +filament_cost = 79.08 + +[filament:Prusament PC Blend Carbon Fiber @DQ2] +renamed_from = "DeltiQ - PC - PC Blend Carbon Fiber (Prusa Polymers)" +inherits = Generic ABS @DQ2; *DQ2 0.4X* +filament_type = PCCF +filament_vendor = Prusa Polymers +bridge_fan_speed = 30 +disable_fan_first_layers = 4 +max_fan_speed = 20 +min_fan_speed = 20 +fan_always_on = 0 +extrusion_multiplier = 1.04 +filament_density = 1.08 +filament_spool_weight = 201 +first_layer_temperature = 280 +temperature = 280 +filament_retract_length = 4.3 +filament_retract_speed = 30 +filament_cost = 49.58 + +[filament:Prusament PC Blend Carbon Fiber @DQ2 0.6 nozzle] +inherits = Prusament PC Blend Carbon Fiber @DQ2; *DQ2 0.6X* +bridge_fan_speed = 75 +disable_fan_first_layers = 3 +max_fan_speed = 65 +min_fan_speed = 10 +fan_always_on = 1 +fan_below_layer_time = 12 +min_print_speed = 15 +slowdown_below_layer_time = 4 +extrusion_multiplier = 1.075 +first_layer_temperature = 285 +temperature = 285 +filament_max_volumetric_speed = 12 +filament_retract_before_wipe = 90% +filament_retract_length = 4 +filament_retract_speed = 25 + +[filament:Wax-Alike MoldLay @DQ2] +renamed_from = "DeltiQ - MoldLay (Wax-Alike)" +inherits = Generic PLA @DQ2; *DQ2 0.4* bed_temperature = 50 -filament_cost = 1951 +filament_cost = 79.07 +filament_spool_weight = 230 filament_retract_length = 2.0 filament_type = PLA first_layer_bed_temperature = 50 @@ -1107,16 +1627,14 @@ min_fan_speed = 70 temperature = 175 filament_vendor = Wax-Alike -# AzteQ filaments # -[filament:*AzteQ common*] -inherits = *DeltiQ common* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.4 +# AzteQ filaments # # AzteQ Industrial filaments # -[filament:AzteQ Industrial (Door Opened) - PLA - Generic] -inherits = *AzteQ common* +[filament:Generic PLA (Door Opened) @AQI] +renamed_from = "AzteQ Industrial (Door Opened) - PLA - Generic" +inherits = *AQI 0.4* bed_temperature = 50 bridge_fan_speed = 100 cooling = 1 @@ -1124,7 +1642,6 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 750 filament_density = 1.24 filament_deretract_speed = nil filament_max_volumetric_speed = 8 @@ -1150,27 +1667,48 @@ max_fan_speed = 100 min_fan_speed = 90 min_print_speed = 10 slowdown_below_layer_time = 15 -start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Set and wait - chamber temperature" +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Wait for chamber temperature" temperature = 210 -[filament:AzteQ Industrial (Door Opened) - PLA - Generic @0.6 nozzle] -inherits = AzteQ Industrial (Door Opened) - PLA - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Smartfil PLA (Door Opened) @AQI] +inherits = Generic PLA (Door Opened) @AQI; *AQI 0.4* +filament_vendor = Smartfil +filament_type = PLA +bed_temperature = 55 +first_layer_bed_temperature = 55 +first_layer_temperature = 220 +temperature = 220 +extrusion_multiplier = 0.93 +filament_retract_before_travel = 2.5 +filament_retract_before_wipe = 90% +filament_retract_length = 3.9 +min_fan_speed = 100 +min_print_speed = 20 +slowdown_below_layer_time = 2 +filament_cost = 21.12 -[filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum)] -inherits = AzteQ Industrial (Door Opened) - PLA - Generic +[filament:Smartfil PLA (Door Opened) @AQD] +inherits = Smartfil PLA (Door Opened) @AQI; *AQD 0.4* + +[filament:Generic PLA (Door Opened) @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial (Door Opened) - PLA - Generic @0.6 nozzle" +inherits = Generic PLA (Door Opened) @AQI; *AQI 0.6* + +[filament:Fillamentum PLA (Door Opened) @AQI] +renamed_from = "AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum)" +inherits = Generic PLA (Door Opened) @AQI; *AQI 0.4* filament_vendor = Fillamentum -filament_cost = 750 +filament_cost = 24.27 filament_density = 1.24 +filament_spool_weight = 229 -[filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) @0.6 nozzle] -inherits = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Fillamentum PLA (Door Opened) @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) @0.6 nozzle" +inherits = Fillamentum PLA (Door Opened) @AQI; *AQI 0.6* -[filament:AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum)] -inherits = *AzteQ common* +[filament:Fillamentum PLA (PLA Printhead) @AQI] +renamed_from = "AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum)" +inherits = *AQI 0.4* bed_temperature = 50 bridge_fan_speed = 100 cooling = 1 @@ -1178,8 +1716,9 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 750 +filament_cost = 24.27 filament_density = 1.24 +filament_spool_weight = 229 filament_deretract_speed = nil filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 @@ -1192,7 +1731,6 @@ filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 -filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = PLA filament_vendor = Fillamentum @@ -1204,16 +1742,16 @@ max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 10 slowdown_below_layer_time = 5 -start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Set and wait - chamber temperature" +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Wait for chamber temperature" temperature = 215 -[filament:AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) @0.6 nozzle] -inherits = AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Fillamentum PLA (PLA Printhead) @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum) @0.6 nozzle" +inherits = Fillamentum PLA (PLA Printhead) @AQI; *AQI 0.6* -[filament:AzteQ Industrial - ABS - Generic] -inherits = *AzteQ common* +[filament:Generic ABS @AQI] +renamed_from = "AzteQ Industrial - ABS - Generic" +inherits = *AQI 0.4* bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 @@ -1221,7 +1759,6 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 639 filament_density = 1.04 filament_deretract_speed = nil filament_load_time = 0 @@ -1240,7 +1777,6 @@ filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_type = ABS -filament_vendor = Generic filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 255 @@ -1249,30 +1785,76 @@ max_fan_speed = 100 min_fan_speed = 80 min_print_speed = 10 slowdown_below_layer_time = 5 -start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature" temperature = 255 -[filament:AzteQ Industrial - ABS - Generic @0.6 nozzle] -inherits = AzteQ Industrial - ABS - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Generic ABS @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial - ABS - Generic @0.6 nozzle" +inherits = Generic ABS @AQI; *AQI 0.6* -[filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum)] -inherits = AzteQ Industrial - ABS - Generic +[filament:Generic ABS @AQI 0.8 nozzle] +renamed_from = "AzteQ Industrial - ABS - Generic @0.8 nozzle" +inherits = Generic ABS @AQI; *AQI 0.8* +first_layer_temperature = 255 +first_layer_bed_temperature = 100 +temperature = 255 +bed_temperature = 100 +max_fan_speed = 80 +min_fan_speed = 50 +filament_retract_length = 6.1 +filament_max_volumetric_speed = 0 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature" + +[filament:Fillamentum ABS @AQI] +renamed_from = "AzteQ Industrial - ABS - ExtraFill (Fillamentum)" +inherits = Generic ABS @AQI; *AQI 0.4* filament_vendor = Fillamentum -filament_cost = 639 +filament_cost = 24.27 filament_density = 1.04 +filament_spool_weight = 229 -[filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle] -inherits = AzteQ Industrial - ABS - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Fillamentum ABS @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle" +inherits = Fillamentum ABS @AQI; *AQI 0.6* -[filament:AzteQ Industrial - PC/ABS - (Fillamentum)] -inherits = AzteQ Industrial - ABS - Generic +[filament:Fillamentum ABS @AQI 0.8 nozzle] +renamed_from = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.8 nozzle" +inherits = Fillamentum ABS @AQI; *AQI 0.8* +extrusion_multiplier = 0.95 + +[filament:Prusa EasyABS @AQI] +inherits = Generic ABS @AQI; *AQI 0.4* +filament_type = ABST +bridge_fan_speed = 90 +max_fan_speed = 80 +min_fan_speed = 50 +fan_below_layer_time = 15 +slowdown_below_layer_time = 3 +extrusion_multiplier = 0.96 +filament_spool_weight = 230 +first_layer_temperature = 250 +temperature = 250 +filament_max_volumetric_speed = 10 +filament_retract_length = 4.7 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature" +filament_vendor = Prusa +filament_cost = 22.31 + +[filament:Prusa EasyABS @AQD] +inherits = Prusa EasyABS @AQI; *AQD 0.4* +min_fan_speed = 30 +min_print_speed = 15 +extrusion_multiplier = 0.925 +filament_retract_length = 4.2 +filament_retract_before_wipe = 80% + +[filament:Fillamentum PC/ABS @AQI] +renamed_from = "AzteQ Industrial - PC/ABS - (Fillamentum)" +inherits = Generic ABS @AQI; *AQI 0.4* filament_vendor = Fillamentum filament_type = PCABS -filament_cost = 1324 +filament_cost = 53.71 +filament_spool_weight = 229 filament_density = 1.07 bed_temperature = 100 filament_retract_length = 4.0 @@ -1280,19 +1862,19 @@ first_layer_bed_temperature = 100 first_layer_temperature = 265 max_fan_speed = 50 min_fan_speed = 50 -start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature" temperature = 265 -filament_notes = "S180 ; Probing temperature" -[filament:AzteQ Industrial - PC/ABS - (Fillamentum) @0.6 nozzle] -inherits = AzteQ Industrial - PC/ABS - (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Fillamentum PC/ABS @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial - PC/ABS - (Fillamentum) @0.6 nozzle" +inherits = Fillamentum PC/ABS @AQI; *AQI 0.6* -[filament:AzteQ Industrial - PC - PolyMax (Polymaker)] -inherits = AzteQ Industrial - ABS - Generic +[filament:Polymaker PC @AQI] +renamed_from = "AzteQ Industrial - PC - PolyMax (Polymaker)" +inherits = Generic ABS @AQI; *AQI 0.4* filament_vendor = Polymaker -filament_cost = 1290 +filament_spool_weight = 230 +filament_cost = 52.40 filament_density = 1.21 bed_temperature = 100 filament_retract_length = 4.0 @@ -1300,17 +1882,16 @@ first_layer_bed_temperature = 100 first_layer_temperature = 265 max_fan_speed = 50 min_fan_speed = 50 -start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature" temperature = 265 -filament_notes = "S180 ; Probing temperature" -[filament:AzteQ Industrial - PC - PolyMax (Polymaker) @0.6 nozzle] -inherits = AzteQ Industrial - PC - PolyMax (Polymaker) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Polymaker PC @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial - PC - PolyMax (Polymaker) @0.6 nozzle" +inherits = Polymaker PC @AQI; *AQI 0.6* -[filament:AzteQ Industrial - ASA - Generic] -inherits = *AzteQ common* +[filament:Generic ASA @AQI] +renamed_from = "AzteQ Industrial - ASA - Generic" +inherits = *AQI 0.4* bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 @@ -1318,7 +1899,6 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 739 filament_density = 1.07 filament_deretract_speed = nil filament_max_volumetric_speed = 8 @@ -1334,7 +1914,6 @@ filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_type = ASA -filament_vendor = Generic filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 265 @@ -1343,46 +1922,84 @@ max_fan_speed = 75 min_fan_speed = 50 min_print_speed = 10 slowdown_below_layer_time = 5 -start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature" +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature" temperature = 265 -[filament:AzteQ Industrial - ASA - Generic @0.6 nozzle] -inherits = AzteQ Industrial - ASA - Generic -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Generic ASA @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial - ASA - Generic @0.6 nozzle" +inherits = Generic ASA @AQI; *AQI 0.6* -[filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum)] -inherits = AzteQ Industrial - ASA - Generic +[filament:Fillamentum ASA @AQI] +renamed_from = "AzteQ Industrial - ASA - ExtraFill (Fillamentum)" +inherits = Generic ASA @AQI; *AQI 0.4* filament_vendor = Fillamentum first_layer_temperature = 255 temperature = 255 max_fan_speed = 80 min_fan_speed = 60 - -[filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.6 nozzle] -inherits = AzteQ Industrial - ASA - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 - -[filament:AzteQ Industrial - ASA - Prusament (Prusa)] -inherits = AzteQ Industrial - ASA - Generic -filament_cost = 680 +filament_spool_weight = 229 +filament_cost = 29.53 filament_density = 1.07 -filament_spool_weight = 0 -filament_vendor = Prusa + +[filament:Fillamentum ASA @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.6 nozzle" +inherits = Fillamentum ASA @AQI; *AQI 0.6* + +[filament:Fillamentum ASA @AQI 0.8 nozzle] +renamed_from = "AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.8 nozzle" +inherits = Fillamentum ASA @AQI; *AQI 0.8* +first_layer_bed_temperature = 100 +bed_temperature = 100 +first_layer_temperature = 250 +temperature = 250 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature" +max_fan_speed = 100 +min_fan_speed = 80 +filament_retract_length = 6.1 +filament_max_volumetric_speed = 0 + + +[filament:Prusament ASA @AQI] +renamed_from = "AzteQ Industrial - ASA - Prusament (Prusa Polymers)" +inherits = Generic ASA @AQI; *AQI 0.4* +filament_cost = 29.16 +filament_density = 1.07 +filament_spool_weight = 201 +filament_vendor = Prusa Polymers first_layer_temperature = 260 max_fan_speed = 70 min_fan_speed = 70 -start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature" +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature" temperature = 260 -[filament:AzteQ Industrial - ASA - Prusament (Prusa) @0.6 nozzle] -inherits = AzteQ Industrial - ASA - Prusament (Prusa) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Prusament ASA @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial - ASA - Prusament (Prusa Polymers) @0.6 nozzle" +inherits = Prusament ASA @AQI; *AQI 0.6* -[filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy)] -inherits = *AzteQ common* +[filament:Prusament ASA @AQI 0.8 nozzle] +renamed_from = "AzteQ Industrial - ASA - Prusament (Prusa Polymers) @0.8 nozzle" +inherits = Prusament ASA @AQI; *AQI 0.8* +first_layer_bed_temperature = 100 +bed_temperature = 100 +first_layer_temperature = 250 +temperature = 250 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature" +max_fan_speed = 80 +min_fan_speed = 50 +filament_retract_length = 4.1 +filament_max_volumetric_speed = 0 + +[filament:Prusament ASA @AQD] +inherits = Prusament ASA @AQI; *AQD 0.4* +extrusion_multiplier = 0.925 +first_layer_temperature = 250 +temperature = 250 +filament_retract_length = 2.7 +min_fan_speed = 20 + +[filament:Fiberlogy Nylon PA12 @AQI] +renamed_from = "AzteQ Industrial - PA - Nylon PA12 (Fiberlogy)" +inherits = *AQI 0.4* bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 @@ -1390,7 +2007,8 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 1212 +filament_cost = 45.11 +filament_spool_weight = 230 filament_density = 1.02 filament_deretract_speed = nil filament_max_volumetric_speed = 8 @@ -1404,9 +2022,8 @@ filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 -filament_spool_weight = 0 filament_toolchange_delay = 0 -filament_type = NYLON +filament_type = PA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 @@ -1419,16 +2036,16 @@ max_fan_speed = 75 min_fan_speed = 50 min_print_speed = 10 slowdown_below_layer_time = 5 -start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature" +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Wait for chamber temperature" temperature = 255 -[filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy) @0.6 nozzle] -inherits = AzteQ Industrial - PA - Nylon PA12 (Fiberlogy) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Fiberlogy Nylon PA12 @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial - PA - Nylon PA12 (Fiberlogy) @0.6 nozzle" +inherits = Fiberlogy Nylon PA12 @AQI; *AQI 0.6* -[filament:AzteQ Industrial - PA - Nylon FX256 (Fillamentum)] -inherits = *AzteQ common* +[filament:Fillamentum Nylon FX256 @AQI] +renamed_from = "AzteQ Industrial - PA - Nylon FX256 (Fillamentum)" +inherits = *AQI 0.4* bed_temperature = 100 bridge_fan_speed = 100 cooling = 1 @@ -1436,7 +2053,8 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 1565 +filament_cost = 57.32 +filament_spool_weight = 229 filament_density = 1.01 filament_deretract_speed = nil filament_max_volumetric_speed = 8 @@ -1450,9 +2068,8 @@ filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 -filament_spool_weight = 0 filament_toolchange_delay = 0 -filament_type = NYLON +filament_type = PA filament_unload_time = 0 filament_unloading_speed = 90 filament_unloading_speed_start = 100 @@ -1465,16 +2082,16 @@ max_fan_speed = 85 min_fan_speed = 50 min_print_speed = 10 slowdown_below_layer_time = 5 -start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S60 ; Set and wait - chamber temperature" +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S60 ; Wait for chamber temperature" temperature = 255 -[filament:AzteQ Industrial - PA - Nylon FX256 (Fillamentum) @0.6 nozzle] -inherits = AzteQ Industrial - PA - Nylon FX256 (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Fillamentum Nylon FX256 @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial - PA - Nylon FX256 (Fillamentum) @0.6 nozzle" +inherits = Fillamentum Nylon FX256 @AQI; *AQI 0.6* -[filament:AzteQ Industrial - PC Blend - Prusament (Prusa)] -inherits = *AzteQ common* +[filament:Prusament PC Blend @AQI] +renamed_from = "AzteQ Industrial - PC Blend - Prusament (Prusa Polymers)" +inherits = *AQI 0.4* bed_temperature = 100 bridge_fan_speed = 75 cooling = 1 @@ -1482,8 +2099,9 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 1156 +filament_cost = 61.98 filament_density = 1.22 +filament_spool_weight = 201 filament_deretract_speed = nil filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 @@ -1496,9 +2114,8 @@ filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 -filament_spool_weight = 0 filament_type = PC -filament_vendor = Prusa +filament_vendor = Prusa Polymers filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 270 @@ -1507,15 +2124,25 @@ max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 10 slowdown_below_layer_time = 5 -start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature" temperature = 270 -filament_notes = "S180 ; Probing temperature" -[filament:AzteQ Industrial - PC Blend - Prusament (Prusa) @0.6 nozzle] -inherits = AzteQ Industrial - PC Blend - Prusament (Prusa) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 +[filament:Prusament PC Blend @AQI 0.6 nozzle] +renamed_from = "AzteQ Industrial - PC Blend - Prusament (Prusa Polymers) @0.6 nozzle" +inherits = Prusament PC Blend @AQI; *AQI 0.6* +[filament:Prusament PC Blend @AQI 0.8 nozzle] +renamed_from = "AzteQ Industrial - PC Blend - Prusament (Prusa Polymers) @0.8 nozzle" +inherits = Prusament PC Blend @AQI; *AQI 0.8* +first_layer_bed_temperature = 100 +bed_temperature = 100 +first_layer_temperature = 275 +temperature = 275 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Wait for chamber temperature" +max_fan_speed = 60 +min_fan_speed = 60 +filament_retract_length = 7.1 +filament_max_volumetric_speed = 0 # DeltiQ Printer # @@ -1532,7 +2159,7 @@ default_print_profile = DeltiQ 0.20mm Normal deretract_speed = 0 end_gcode = ;END\nM104 S0 ; Turn extruder heater off\nM140 S0 ; Turn bed heater off\nG28 ; Home all axes\nM84 S5 ; Stop all axes and hold inidle for 5 seconds\nG90 ; Absolute positioning extra_loading_move = -2 -extruder_colour = #FF0000 +extruder_colour = #EC626F extruder_offset = 0x0 gcode_flavor = repetier layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n @@ -1599,13 +2226,33 @@ retract_speed = 35 [printer:*DeltiQ 2*] inherits = *DeltiQ* +default_filament_profile = "Prusament PLA @DQ2" +default_print_profile = 0.20mm Normal @DQ2 before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nG28 ; Home\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100 ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors gcode_flavor = reprapfirmware layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z] -pause_print_gcode = M0 -start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT0 ; Select Titan extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder +pause_print_gcode = M25 +start_gcode = ; START_GCODE\n\nT0 ; Select Titan extruder\nM220 S100 ; Set feedmultiply back to 100percent\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nG28 ; Home all axes\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2 +machine_limits_usage = time_estimate_only +machine_max_acceleration_e = 9000 +machine_max_acceleration_extruding = 1000 +machine_max_acceleration_retracting = 1000 +machine_max_acceleration_travel = 2000 +machine_max_acceleration_x = 2000 +machine_max_acceleration_y = 2000 +machine_max_acceleration_z = 2000 +machine_max_feedrate_e = 50 +machine_max_feedrate_x = 300 +machine_max_feedrate_y = 300 +machine_max_feedrate_z = 300 +machine_max_jerk_e = 20 +machine_max_jerk_x = 10 +machine_max_jerk_y = 10 +machine_max_jerk_z = 10 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 [printer:DeltiQ 2] inherits = *DeltiQ 2* @@ -1619,8 +2266,8 @@ printer_variant = 0.25 max_layer_height = 0.15 min_layer_height = 0.07 nozzle_diameter = 0.25 -default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle" -default_print_profile = DeltiQ 0.07mm Quality @0.25 nozzle +default_filament_profile = "Fillamentum PLA @DQ2 0.25 nozzle" +default_print_profile = 0.07mm Quality @DQ2 0.25 nozzle [printer:DeltiQ 2 - 0.6 nozzle] inherits = DeltiQ 2 @@ -1628,8 +2275,8 @@ printer_variant = 0.6 max_layer_height = 0.4 min_layer_height = 0.2 nozzle_diameter = 0.6 -default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle" -default_print_profile = DeltiQ 0.30mm Normal @0.6 nozzle +default_filament_profile = "Prusament PLA @DQ2 0.6 nozzle" +default_print_profile = 0.30mm Normal @DQ2 0.6 nozzle [printer:DeltiQ 2 - 0.8 nozzle] inherits = DeltiQ 2 @@ -1637,8 +2284,8 @@ printer_variant = 0.8 max_layer_height = 0.6 min_layer_height = 0.3 nozzle_diameter = 0.8 -default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle" -default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle +default_filament_profile = "Prusament PLA @DQ2 0.8 nozzle" +default_print_profile = 0.40mm Normal @DQ2 0.8 nozzle [printer:DeltiQ 2 Plus] inherits = *DeltiQ 2* @@ -1652,8 +2299,8 @@ printer_variant = 0.25 max_layer_height = 0.15 min_layer_height = 0.07 nozzle_diameter = 0.25 -default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.25 nozzle" -default_print_profile = DeltiQ 0.07mm Quality @0.25 nozzle +default_filament_profile = "Fillamentum PLA @DQ2 0.25 nozzle" +default_print_profile = 0.07mm Quality @DQ2 0.25 nozzle [printer:DeltiQ 2 Plus - 0.6 nozzle] inherits = DeltiQ 2 Plus @@ -1661,8 +2308,8 @@ printer_variant = 0.6 max_layer_height = 0.4 min_layer_height = 0.2 nozzle_diameter = 0.6 -default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.6 nozzle" -default_print_profile = DeltiQ 0.30mm Normal @0.6 nozzle +default_filament_profile = "Prusament PLA @DQ2 0.6 nozzle" +default_print_profile = 0.30mm Normal @DQ2 0.6 nozzle [printer:DeltiQ 2 Plus - 0.8 nozzle] inherits = DeltiQ 2 Plus @@ -1670,17 +2317,18 @@ printer_variant = 0.8 max_layer_height = 0.6 min_layer_height = 0.3 nozzle_diameter = 0.8 -default_filament_profile = "DeltiQ - PLA - ExtraFill (Fillamentum) @0.8 nozzle" -default_print_profile = DeltiQ 0.40mm Normal @0.8 nozzle +default_filament_profile = "Prusament PLA @DQ2 0.8 nozzle" +default_print_profile = 0.40mm Normal @DQ2 0.8 nozzle [printer:*DeltiQ 2 FlexPrint*] inherits = *DeltiQ 2* -start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder -default_print_profile = DeltiQ 0.20mm FLEX -default_filament_profile = "DeltiQ FP2 - FLEX - Generic" +start_gcode = ; START_GCODE\n\nM220 S100 ; Set feedmultiply back to 100percent\n\nT1 ; Select FlexPrint extruder\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nG28 ; Home all axes\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\n\nG29 ; Mesh bed probe\n\nG1009 ; Go ARC to purge end\n\nG92 E0 ; Zero extruder +default_print_profile = 0.20mm FLEX @DQ2FP +default_filament_profile = "Generic FLEX @DQ2FP" retract_length = 0.7 retract_speed = 25 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT1 +machine_max_jerk_e = 0.6 [printer:DeltiQ 2 + FlexPrint] inherits = *DeltiQ 2 FlexPrint* @@ -1696,7 +2344,7 @@ max_print_height = 500 [printer:*DeltiQ 2 FlexPrint 2*] inherits = *DeltiQ 2 FlexPrint* -default_filament_profile = "DeltiQ FP2 - FLEX - Generic" +default_filament_profile = "Generic FLEX @DQ2FP2" retract_length = 0.8 retract_speed = 25 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2+FP\nFLEXPRINT2 @@ -1713,7 +2361,7 @@ printer_model = DQ2P+FP2 printer_variant = 0.4 max_print_height = 500 -[printer:*AzteQ*] +[printer:*AQI*] inherits = *DeltiQ 2* max_print_height = 400 bed_shape = 149.429x13.0734,147.721x26.0472,144.889x38.8229,140.954x51.303,135.946x63.3927,129.904x75,122.873x86.0365,114.907x96.4181,106.066x106.066,96.4181x114.907,86.0365x122.873,75x129.904,63.3927x135.946,51.303x140.954,38.8229x144.889,26.0472x147.721,13.0734x149.429,9.18485e-15x150,-13.0734x149.429,-26.0472x147.721,-38.8229x144.889,-51.303x140.954,-63.3927x135.946,-75x129.904,-86.0365x122.873,-96.4181x114.907,-106.066x106.066,-114.907x96.4181,-122.873x86.0365,-129.904x75,-135.946x63.3927,-140.954x51.303,-144.889x38.8229,-147.721x26.0472,-149.429x13.0734,-150x1.83697e-14,-149.429x-13.0734,-147.721x-26.0472,-144.889x-38.8229,-140.954x-51.303,-135.946x-63.3927,-129.904x-75,-122.873x-86.0365,-114.907x-96.4181,-106.066x-106.066,-96.4181x-114.907,-86.0365x-122.873,-75x-129.904,-63.3927x-135.946,-51.303x-140.954,-38.8229x-144.889,-26.0472x-147.721,-13.0734x-149.429,-2.75546e-14x-150,13.0734x-149.429,26.0472x-147.721,38.8229x-144.889,51.303x-140.954,63.3927x-135.946,75x-129.904,86.0365x-122.873,96.4181x-114.907,106.066x-106.066,114.907x-96.4181,122.873x-86.0365,129.904x-75,135.946x-63.3927,140.954x-51.303,144.889x-38.8229,147.721x-26.0472,149.429x-13.0734,150x-3.67394e-14 @@ -1732,16 +2380,16 @@ retract_lift_below = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 30 -start_gcode = ; START_GCODE\nT0\nM220 S100 ; Set feedmultiply back to 100 percent\nG90 ; Absolute positioning for motion\nM83 ; Relative extruder\nM107 ; Layer fan off\n\nM140 S[first_layer_bed_temperature] ; Set and continue - bed temperature\nM104 S150 ; Set and continue - hotend probing temperature\n[start_filament_gcode]\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM109 [filament_notes] ; Set and wait for material specific hotend probing temperature\n\nG28 ; Home all axes\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nM104 S[first_layer_temperature] ; Set and continue - printing temperature\n\nG1009 ; Purge hotend\nG92 E0 ; Zero extruder +start_gcode = ; START_GCODE\nT0\nM220 S100 ; Set feedmultiply back to 100 percent\n\nG90 ; Absolute positioning for motion\nM83 ; Relative extruder\nM107 ; Layer fan off\n\nG28 ; Home all axes\n\nM140 S[first_layer_bed_temperature] ; Set bed temperature\nM104 S{if filament_type[0]=~/(ABS)?(ABST)?(PC)?(PCABS)?(PA)?(PACF)?(PAGF)?/}180{else}150{endif} ; Set hotend material specific probing temperature\n[start_filament_gcode]\nM190 ; Wait for bed temperature\nM109 ; Wait for hotend probing temperature\n\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nM104 S[first_layer_temperature] ; Set hotend printing temperature\n\nG1009 ; Purge hotend\nG92 E0 ; Zero extruder wipe = 1 [printer:AzteQ Industrial] -inherits = *AzteQ* +inherits = *AQI* printer_model = AQI printer_variant = 0.4 max_print_height = 400 -default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum)" -default_print_profile = AzteQ Industrial 0.30mm Normal +default_filament_profile = "Prusament ASA @AQI" +default_print_profile = 0.20mm Normal @AQ [printer:AzteQ Industrial - 0.6 nozzle] inherits = AzteQ Industrial @@ -1749,10 +2397,32 @@ printer_variant = 0.6 max_layer_height = 0.4 min_layer_height = 0.2 nozzle_diameter = 0.6 -default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle" -default_print_profile = AzteQ Industrial 0.30mm Normal @0.6 nozzle +default_filament_profile = "Prusament ASA @AQI 0.6 nozzle" +default_print_profile = 0.30mm Normal @AQ 0.6 nozzle + +[printer:AzteQ Industrial - 0.8 nozzle] +inherits = AzteQ Industrial +printer_variant = 0.8 +max_layer_height = 0.6 +min_layer_height = 0.2 +nozzle_diameter = 0.8 +default_filament_profile = "Prusament ASA @AQI 0.8 nozzle" +default_print_profile = 0.40mm Normal @AQ 0.8 nozzle + +[printer:*AQD*] +inherits = *AQI* +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_AQ\nPRINTER_MODEL_AQD +start_gcode = ; START_GCODE\nT0\nM220 S100 ; Set feedmultiply back to 100 percent\n\nG90 ; Absolute positioning for motion\nM83 ; Relative extruder\nM107 ; Layer fan off\n\nG28 ; Home all axes\n\nM140 S[first_layer_bed_temperature] ; Set bed temperature\nM104 S{if filament_type[0]=~/(ABS)?(ABST)?(PC)?(PCABS)?(PA)?(PACF)?(PAGF)?/}180{else}150{endif} ; Set hotend material specific probing temperature\n[start_filament_gcode]\nM190 ; Wait for bed temperature\nM109 ; Wait for hotend probing temperature\n\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nM104 S[first_layer_temperature] ; Set hotend printing temperature\n\nG1009 ; Purge hotend\nG92 E0 ; Zero extruder + +[printer:AzteQ Dynamic] +inherits = *AQD* +printer_model = AQD +printer_variant = 0.4 +max_print_height = 400 +default_filament_profile = "Prusament ASA @AQI" +default_print_profile = 0.20mm Normal @AQ [presets] -print = DeltiQ 0.20mm Normal +print = 0.20mm Normal @DQ2 printer = DeltiQ 2 -filament = DeltiQ - PLA - Generic \ No newline at end of file +filament = Prusament PLA @DQ2 \ No newline at end of file