More refactoring to GCode.pm: make writer() public and fix usage of Slic3r::GCode without a Slic3r::Layer object
This commit is contained in:
Alessandro Ranellucci
parent
a38ec14cb1
commit
268de5c8e5
@ -15,13 +15,12 @@ use Slic3r::Surface ':types';
|
||||
has 'origin' => (is => 'rw', default => sub { Slic3r::Pointf->new });
|
||||
|
||||
has 'config' => (is => 'ro', default => sub { Slic3r::Config::Full->new });
|
||||
has '_writer' => (is => 'ro', default => sub { Slic3r::GCode::Writer->new },
|
||||
handles => [qw(set_fan set_temperature set_bed_temperature
|
||||
extruders reset_e multiple_extruders extruder)]);
|
||||
has 'writer' => (is => 'ro', default => sub { Slic3r::GCode::Writer->new });
|
||||
has 'placeholder_parser' => (is => 'rw', default => sub { Slic3r::GCode::PlaceholderParser->new });
|
||||
has 'ooze_prevention' => (is => 'rw');
|
||||
has 'enable_loop_clipping' => (is => 'rw', default => sub {1});
|
||||
has 'enable_wipe' => (is => 'rw', default => sub {0}); # at least one extruder has wipe enabled
|
||||
has 'enable_cooling_markers' => (is =>'rw', default => sub {0});
|
||||
has 'layer_count' => (is => 'ro');
|
||||
has '_layer_index' => (is => 'rw', default => sub {-1}); # just a counter
|
||||
has 'layer' => (is => 'rw');
|
||||
@ -32,6 +31,7 @@ has '_external_mp' => (is => 'rw');
|
||||
has '_layer_mp' => (is => 'rw');
|
||||
has 'new_object' => (is => 'rw', default => sub {0}); # this flag triggers the use of the external configuration space for avoid_crossing_perimeters for the next travel move
|
||||
has 'straight_once' => (is => 'rw', default => sub {1}); # this flag disables avoid_crossing_perimeters just for the next travel move
|
||||
has 'first_layer' => (is => 'rw', default => sub {0}); # this flag triggers first layer speeds
|
||||
has 'elapsed_time' => (is => 'rw', default => sub {0} ); # seconds
|
||||
has 'last_pos' => (is => 'rw', default => sub { Slic3r::Point->new(0,0) } );
|
||||
has '_wipe_path' => (is => 'rw');
|
||||
@ -39,14 +39,14 @@ has '_wipe_path' => (is => 'rw');
|
||||
sub apply_print_config {
|
||||
my ($self, $print_config) = @_;
|
||||
|
||||
$self->_writer->apply_print_config($print_config);
|
||||
$self->writer->apply_print_config($print_config);
|
||||
$self->config->apply_print_config($print_config);
|
||||
}
|
||||
|
||||
sub set_extruders {
|
||||
my ($self, $extruder_ids) = @_;
|
||||
|
||||
$self->_writer->set_extruders($extruder_ids);
|
||||
$self->writer->set_extruders($extruder_ids);
|
||||
|
||||
# enable wipe path generation if any extruder has wipe enabled
|
||||
$self->enable_wipe(defined first { $self->config->get_at('wipe', $_) } @$extruder_ids);
|
||||
@ -76,6 +76,7 @@ sub change_layer {
|
||||
|
||||
$self->layer($layer);
|
||||
$self->_layer_index($self->_layer_index + 1);
|
||||
$self->first_layer($layer->id == 0);
|
||||
|
||||
# avoid computing islands and overhangs if they're not needed
|
||||
$self->_layer_islands($layer->islands);
|
||||
@ -89,14 +90,14 @@ sub change_layer {
|
||||
my $gcode = "";
|
||||
if (defined $self->layer_count) {
|
||||
# TODO: cap this to 99% and add an explicit M73 P100 in the end G-code
|
||||
$gcode .= $self->_writer->update_progress(int(99 * ($self->_layer_index / ($self->layer_count - 1))));
|
||||
$gcode .= $self->writer->update_progress(int(99 * ($self->_layer_index / ($self->layer_count - 1))));
|
||||
}
|
||||
|
||||
my $z = $layer->print_z + $self->config->z_offset; # in unscaled coordinates
|
||||
if ($self->config->get_at('retract_layer_change', $self->_writer->extruder->id) && $self->_writer->will_move_z($z)) {
|
||||
if ($self->config->get_at('retract_layer_change', $self->writer->extruder->id) && $self->writer->will_move_z($z)) {
|
||||
$gcode .= $self->retract;
|
||||
}
|
||||
$gcode .= $self->_writer->travel_to_z($z, 'move to next layer (' . $self->layer->id . ')');
|
||||
$gcode .= $self->writer->travel_to_z($z, 'move to next layer (' . $self->layer->id . ')');
|
||||
return $gcode;
|
||||
}
|
||||
|
||||
@ -126,7 +127,7 @@ sub extrude_loop {
|
||||
} elsif ($self->config->seam_position eq 'nearest' || $self->config->seam_position eq 'aligned') {
|
||||
# simplify polygon in order to skip false positives in concave/convex detection
|
||||
my $polygon = $loop->polygon;
|
||||
my @simplified = @{$polygon->simplify(scale $self->config->get_at('nozzle_diameter', $self->_writer->extruder->id)/2)};
|
||||
my @simplified = @{$polygon->simplify(scale $self->config->get_at('nozzle_diameter', $self->writer->extruder->id)/2)};
|
||||
|
||||
# concave vertices have priority
|
||||
my @candidates = map @{$_->concave_points(PI*4/3)}, @simplified;
|
||||
@ -135,7 +136,7 @@ sub extrude_loop {
|
||||
@candidates = map @{$_->convex_points(PI*2/3)}, @simplified if !@candidates;
|
||||
|
||||
# retrieve the last start position for this object
|
||||
my $obj_ptr;
|
||||
my $obj_ptr = 0;
|
||||
if (defined $self->layer) {
|
||||
$obj_ptr = $self->layer->object->ptr;
|
||||
if (defined $self->_seam_position->{$self->layer->object}) {
|
||||
@ -172,7 +173,7 @@ sub extrude_loop {
|
||||
# if polyline was shorter than the clipping distance we'd get a null polyline, so
|
||||
# we discard it in that case
|
||||
my $clip_length = $self->enable_loop_clipping
|
||||
? scale($self->config->get_at('nozzle_diameter', $self->_writer->extruder->id)) * &Slic3r::LOOP_CLIPPING_LENGTH_OVER_NOZZLE_DIAMETER
|
||||
? scale($self->config->get_at('nozzle_diameter', $self->writer->extruder->id)) * &Slic3r::LOOP_CLIPPING_LENGTH_OVER_NOZZLE_DIAMETER
|
||||
: 0;
|
||||
|
||||
# get paths
|
||||
@ -189,7 +190,7 @@ sub extrude_loop {
|
||||
my $gcode = join '', map $self->_extrude_path($_, $description, $speed), @paths;
|
||||
|
||||
# reset acceleration
|
||||
$gcode .= $self->_writer->set_acceleration($self->config->default_acceleration);
|
||||
$gcode .= $self->writer->set_acceleration($self->config->default_acceleration);
|
||||
|
||||
$self->_wipe_path($paths[-1]->polyline->clone) if $self->enable_wipe; # TODO: don't limit wipe to last path
|
||||
|
||||
@ -206,7 +207,7 @@ sub extrude_loop {
|
||||
# we make sure we don't exceed the segment length because we don't know
|
||||
# the rotation of the second segment so we might cross the object boundary
|
||||
my $first_segment = Slic3r::Line->new(@$last_path_polyline[0,1]);
|
||||
my $distance = min(scale($self->config->get_at('nozzle_diameter', $self->_writer->extruder->id)), $first_segment->length);
|
||||
my $distance = min(scale($self->config->get_at('nozzle_diameter', $self->writer->extruder->id)), $first_segment->length);
|
||||
my $point = $first_segment->point_at($distance);
|
||||
$point->rotate($angle, $last_path_polyline->first_point);
|
||||
|
||||
@ -223,7 +224,7 @@ sub extrude_path {
|
||||
my $gcode = $self->_extrude_path($path, $description, $speed);
|
||||
|
||||
# reset acceleration
|
||||
$gcode .= $self->_writer->set_acceleration($self->config->default_acceleration);
|
||||
$gcode .= $self->writer->set_acceleration($self->config->default_acceleration);
|
||||
|
||||
return $gcode;
|
||||
}
|
||||
@ -247,7 +248,7 @@ sub _extrude_path {
|
||||
# adjust acceleration
|
||||
{
|
||||
my $acceleration;
|
||||
if ($self->config->first_layer_acceleration && $self->layer->id == 0) {
|
||||
if ($self->config->first_layer_acceleration && $self->first_layer) {
|
||||
$acceleration = $self->config->first_layer_acceleration;
|
||||
} elsif ($self->config->perimeter_acceleration && $path->is_perimeter) {
|
||||
$acceleration = $self->config->perimeter_acceleration;
|
||||
@ -258,12 +259,12 @@ sub _extrude_path {
|
||||
} else {
|
||||
$acceleration = $self->config->default_acceleration;
|
||||
}
|
||||
$gcode .= $self->_writer->set_acceleration($acceleration);
|
||||
$gcode .= $self->writer->set_acceleration($acceleration);
|
||||
}
|
||||
|
||||
# calculate extrusion length per distance unit
|
||||
my $e_per_mm = $self->_writer->extruder->e_per_mm3 * $path->mm3_per_mm;
|
||||
$e_per_mm = 0 if !$self->_writer->_extrusion_axis;
|
||||
my $e_per_mm = $self->writer->extruder->e_per_mm3 * $path->mm3_per_mm;
|
||||
$e_per_mm = 0 if !$self->writer->_extrusion_axis;
|
||||
|
||||
# set speed
|
||||
my $F;
|
||||
@ -287,19 +288,19 @@ sub _extrude_path {
|
||||
}
|
||||
$F *= 60; # convert mm/sec to mm/min
|
||||
|
||||
if ($self->layer->id == 0) {
|
||||
if ($self->first_layer) {
|
||||
$F = $self->config->get_abs_value_over('first_layer_speed', $F/60) * 60;
|
||||
}
|
||||
|
||||
# extrude arc or line
|
||||
$gcode .= ";_BRIDGE_FAN_START\n" if $path->is_bridge;
|
||||
$gcode .= ";_BRIDGE_FAN_START\n" if $path->is_bridge && $self->enable_cooling_markers;
|
||||
my $path_length = unscale $path->length;
|
||||
{
|
||||
my $extruder_offset = $self->config->get_at('extruder_offset', $self->_writer->extruder->id);
|
||||
$gcode .= $path->gcode($self->_writer->extruder, $e_per_mm, $F,
|
||||
my $extruder_offset = $self->config->get_at('extruder_offset', $self->writer->extruder->id);
|
||||
$gcode .= $path->gcode($self->writer->extruder, $e_per_mm, $F,
|
||||
$self->origin->x - $extruder_offset->x,
|
||||
$self->origin->y - $extruder_offset->y, #-
|
||||
$self->_writer->_extrusion_axis,
|
||||
$self->writer->_extrusion_axis,
|
||||
$self->config->gcode_comments ? " ; $description" : "");
|
||||
|
||||
if ($self->enable_wipe) {
|
||||
@ -307,7 +308,7 @@ sub _extrude_path {
|
||||
$self->_wipe_path->reverse;
|
||||
}
|
||||
}
|
||||
$gcode .= ";_BRIDGE_FAN_END\n" if $path->is_bridge;
|
||||
$gcode .= ";_BRIDGE_FAN_END\n" if $path->is_bridge && $self->enable_cooling_markers;
|
||||
$self->last_pos($path->last_point);
|
||||
|
||||
if ($self->config->cooling) {
|
||||
@ -335,7 +336,7 @@ sub travel_to {
|
||||
# upper layer (so that ooze will not be visible)
|
||||
# - the path that will be extruded after this travel move is a support material
|
||||
# extrusion and the travel move is contained in a single support material island
|
||||
if ($travel->length < scale $self->config->get_at('retract_before_travel', $self->_writer->extruder->id)
|
||||
if ($travel->length < scale $self->config->get_at('retract_before_travel', $self->writer->extruder->id)
|
||||
|| ($self->config->only_retract_when_crossing_perimeters
|
||||
&& $self->config->fill_density > 0
|
||||
&& (first { $_->contains_line($travel) } @{$self->_upper_layer_islands})
|
||||
@ -343,7 +344,7 @@ sub travel_to {
|
||||
|| (defined $role && $role == EXTR_ROLE_SUPPORTMATERIAL && (first { $_->contains_line($travel) } @{$self->layer->support_islands}))
|
||||
) {
|
||||
# Just perform a straight travel move without any retraction.
|
||||
$gcode .= $self->_writer->travel_to_xy($self->point_to_gcode($point), $comment);
|
||||
$gcode .= $self->writer->travel_to_xy($self->point_to_gcode($point), $comment);
|
||||
} elsif ($self->config->avoid_crossing_perimeters && !$self->straight_once) {
|
||||
# If avoid_crossing_perimeters is enabled and the straight_once flag is not set
|
||||
# we need to plan a multi-segment travel move inside the configuration space.
|
||||
@ -367,7 +368,7 @@ sub travel_to {
|
||||
# If avoid_crossing_perimeters is disabled or the straight_once flag is set,
|
||||
# perform a straight move with a retraction.
|
||||
$gcode .= $self->retract;
|
||||
$gcode .= $self->_writer->travel_to_xy($self->point_to_gcode($point), $comment);
|
||||
$gcode .= $self->writer->travel_to_xy($self->point_to_gcode($point), $comment);
|
||||
}
|
||||
|
||||
# Re-allow avoid_crossing_perimeters for the next travel moves
|
||||
@ -401,7 +402,7 @@ sub _plan {
|
||||
# append the actual path and return
|
||||
# use G1 because we rely on paths being straight (G0 may make round paths)
|
||||
$gcode .= join '',
|
||||
map $self->_writer->travel_to_xy($self->point_to_gcode($_->b), $comment),
|
||||
map $self->writer->travel_to_xy($self->point_to_gcode($_->b), $comment),
|
||||
@travel;
|
||||
return $gcode;
|
||||
}
|
||||
@ -409,25 +410,25 @@ sub _plan {
|
||||
sub retract {
|
||||
my ($self, $toolchange) = @_;
|
||||
|
||||
return "" if !defined $self->_writer->extruder;
|
||||
return "" if !defined $self->writer->extruder;
|
||||
|
||||
my $gcode = "";
|
||||
|
||||
# wipe (if it's enabled for this extruder and we have a stored wipe path)
|
||||
if ($self->config->get_at('wipe', $self->_writer->extruder->id) && $self->_wipe_path) {
|
||||
if ($self->config->get_at('wipe', $self->writer->extruder->id) && $self->_wipe_path) {
|
||||
# Reduce feedrate a bit; travel speed is often too high to move on existing material.
|
||||
# Too fast = ripping of existing material; too slow = short wipe path, thus more blob.
|
||||
my $wipe_speed = $self->_writer->config->travel_speed * 0.8;
|
||||
my $wipe_speed = $self->writer->config->travel_speed * 0.8;
|
||||
|
||||
# get the retraction length
|
||||
my $length = $toolchange
|
||||
? $self->_writer->extruder->retract_length
|
||||
: $self->_writer->extruder->retract_length_toolchange;
|
||||
? $self->writer->extruder->retract_length
|
||||
: $self->writer->extruder->retract_length_toolchange;
|
||||
|
||||
# Calculate how long we need to travel in order to consume the required
|
||||
# amount of retraction. In other words, how far do we move in XY at $wipe_speed
|
||||
# for the time needed to consume retract_length at retract_speed?
|
||||
my $wipe_dist = scale($length / $self->_writer->extruder->retract_speed * $wipe_speed);
|
||||
my $wipe_dist = scale($length / $self->writer->extruder->retract_speed * $wipe_speed);
|
||||
|
||||
# Take the stored wipe path and replace first point with the current actual position
|
||||
# (they might be different, for example, in case of loop clipping).
|
||||
@ -445,25 +446,25 @@ sub retract {
|
||||
# Reduce retraction length a bit to avoid effective retraction speed to be greater than the configured one
|
||||
# due to rounding (TODO: test and/or better math for this)
|
||||
my $dE = $length * ($segment_length / $wipe_dist) * 0.95;
|
||||
$gcode .= $self->_writer->set_speed($wipe_speed*60);
|
||||
$gcode .= $self->_writer->extrude_to_xy(
|
||||
$gcode .= $self->writer->set_speed($wipe_speed*60);
|
||||
$gcode .= $self->writer->extrude_to_xy(
|
||||
$self->point_to_gcode($line->b),
|
||||
-$dE,
|
||||
'retract;_WIPE',
|
||||
'retract' . ($self->enable_cooling_markers ? ';_WIPE' : ''),
|
||||
);
|
||||
$retracted += $dE;
|
||||
}
|
||||
$self->_writer->extruder->set_retracted($self->_writer->extruder->retracted + $retracted);
|
||||
$self->writer->extruder->set_retracted($self->writer->extruder->retracted + $retracted);
|
||||
}
|
||||
|
||||
# The parent class will decide whether we need to perform an actual retraction
|
||||
# (the extruder might be already retracted fully or partially). We call these
|
||||
# methods even if we performed wipe, since this will ensure the entire retraction
|
||||
# length is honored in case wipe path was too short.p
|
||||
$gcode .= $toolchange ? $self->_writer->retract_for_toolchange : $self->_writer->retract;
|
||||
$gcode .= $toolchange ? $self->writer->retract_for_toolchange : $self->writer->retract;
|
||||
|
||||
$gcode .= $self->_writer->reset_e;
|
||||
$gcode .= $self->_writer->lift;
|
||||
$gcode .= $self->writer->reset_e;
|
||||
$gcode .= $self->writer->lift;
|
||||
|
||||
return $gcode;
|
||||
}
|
||||
@ -472,8 +473,8 @@ sub unretract {
|
||||
my ($self) = @_;
|
||||
|
||||
my $gcode = "";
|
||||
$gcode .= $self->_writer->unlift;
|
||||
$gcode .= $self->_writer->unretract('compensate retraction');
|
||||
$gcode .= $self->writer->unlift;
|
||||
$gcode .= $self->writer->unretract('compensate retraction');
|
||||
return $gcode;
|
||||
}
|
||||
|
||||
@ -481,7 +482,7 @@ sub unretract {
|
||||
sub point_to_gcode {
|
||||
my ($self, $point) = @_;
|
||||
|
||||
my $extruder_offset = $self->config->get_at('extruder_offset', $self->_writer->extruder->id);
|
||||
my $extruder_offset = $self->config->get_at('extruder_offset', $self->writer->extruder->id);
|
||||
return Slic3r::Pointf->new(
|
||||
($point->x * &Slic3r::SCALING_FACTOR) + $self->origin->x - $extruder_offset->x,
|
||||
($point->y * &Slic3r::SCALING_FACTOR) + $self->origin->y - $extruder_offset->y, #**
|
||||
@ -491,20 +492,20 @@ sub point_to_gcode {
|
||||
sub set_extruder {
|
||||
my ($self, $extruder_id) = @_;
|
||||
|
||||
return "" if !$self->_writer->need_toolchange($extruder_id);
|
||||
return "" if !$self->writer->need_toolchange($extruder_id);
|
||||
|
||||
# if we are running a single-extruder setup, just set the extruder and return nothing
|
||||
if (!$self->_writer->multiple_extruders) {
|
||||
return $self->_writer->toolchange($extruder_id);
|
||||
if (!$self->writer->multiple_extruders) {
|
||||
return $self->writer->toolchange($extruder_id);
|
||||
}
|
||||
|
||||
# prepend retraction on the current extruder
|
||||
my $gcode = $self->retract(1);
|
||||
|
||||
# append custom toolchange G-code
|
||||
if (defined $self->_writer->extruder && $self->config->toolchange_gcode) {
|
||||
if (defined $self->writer->extruder && $self->config->toolchange_gcode) {
|
||||
$gcode .= sprintf "%s\n", $self->placeholder_parser->process($self->config->toolchange_gcode, {
|
||||
previous_extruder => $self->_writer->extruder->id,
|
||||
previous_extruder => $self->writer->extruder->id,
|
||||
next_extruder => $extruder_id,
|
||||
});
|
||||
}
|
||||
@ -512,10 +513,10 @@ sub set_extruder {
|
||||
# if ooze prevention is enabled, park current extruder in the nearest
|
||||
# standby point and set it to the standby temperature
|
||||
$gcode .= $self->ooze_prevention->pre_toolchange($self)
|
||||
if $self->ooze_prevention && defined $self->_writer->extruder;
|
||||
if $self->ooze_prevention && defined $self->writer->extruder;
|
||||
|
||||
# append the toolchange command
|
||||
$gcode .= $self->_writer->toolchange($extruder_id);
|
||||
$gcode .= $self->writer->toolchange($extruder_id);
|
||||
|
||||
# set the new extruder to the operating temperature
|
||||
$gcode .= $self->ooze_prevention->post_toolchange($self)
|
||||
|
||||
@ -63,14 +63,14 @@ sub flush {
|
||||
}
|
||||
}
|
||||
$fan_speed = 0 if $self->layer_id < $self->config->disable_fan_first_layers;
|
||||
$gcode = $self->gcodegen->set_fan($fan_speed) . $gcode;
|
||||
$gcode = $self->gcodegen->writer->set_fan($fan_speed) . $gcode;
|
||||
|
||||
# bridge fan speed
|
||||
if (!$self->config->cooling || $self->config->bridge_fan_speed == 0 || $self->layer_id < $self->config->disable_fan_first_layers) {
|
||||
$gcode =~ s/^;_BRIDGE_FAN_(?:START|END)\n//gm;
|
||||
} else {
|
||||
$gcode =~ s/^;_BRIDGE_FAN_START\n/ $self->gcodegen->set_fan($self->config->bridge_fan_speed, 1) /gmex;
|
||||
$gcode =~ s/^;_BRIDGE_FAN_END\n/ $self->gcodegen->set_fan($fan_speed, 1) /gmex;
|
||||
$gcode =~ s/^;_BRIDGE_FAN_START\n/ $self->gcodegen->writer->set_fan($self->config->bridge_fan_speed, 1) /gmex;
|
||||
$gcode =~ s/^;_BRIDGE_FAN_END\n/ $self->gcodegen->writer->set_fan($fan_speed, 1) /gmex;
|
||||
}
|
||||
$gcode =~ s/;_WIPE//g;
|
||||
|
||||
|
||||
@ -5,7 +5,7 @@ use List::Util qw(first);
|
||||
use Slic3r::Geometry qw(X Y unscale);
|
||||
|
||||
has 'print' => (is => 'ro', required => 1, handles => [qw(config)]);
|
||||
has 'gcodegen' => (is => 'ro', required => 1, handles => [qw(extruders)]);
|
||||
has 'gcodegen' => (is => 'ro', required => 1);
|
||||
has 'origin' => (is => 'ro', default => sub { Slic3r::Pointf->new(0,0) });
|
||||
|
||||
has 'spiralvase' => (is => 'lazy');
|
||||
@ -63,12 +63,12 @@ sub process_layer {
|
||||
$self->gcodegen->enable_loop_clipping(!defined $self->spiralvase || !$self->spiralvase->enable);
|
||||
|
||||
if (!$self->second_layer_things_done && $layer->id == 1) {
|
||||
for my $extruder (@{$self->extruders}) {
|
||||
for my $extruder (@{$self->gcodegen->writer->extruders}) {
|
||||
my $temperature = $self->config->get_at('temperature', $extruder->id);
|
||||
$gcode .= $self->gcodegen->set_temperature($temperature, 0, $extruder->id)
|
||||
$gcode .= $self->gcodegen->writer->set_temperature($temperature, 0, $extruder->id)
|
||||
if $temperature && $temperature != $self->config->get_at('first_layer_temperature', $extruder->id);
|
||||
}
|
||||
$gcode .= $self->gcodegen->set_bed_temperature($self->print->config->bed_temperature)
|
||||
$gcode .= $self->gcodegen->writer->set_bed_temperature($self->print->config->bed_temperature)
|
||||
if $self->print->config->bed_temperature && $self->print->config->bed_temperature != $self->print->config->first_layer_bed_temperature;
|
||||
$self->second_layer_things_done(1);
|
||||
}
|
||||
@ -83,7 +83,7 @@ sub process_layer {
|
||||
if (((values %{$self->skirt_done}) < $self->print->config->skirt_height || $self->print->config->skirt_height == -1)
|
||||
&& !$self->skirt_done->{$layer->print_z}) {
|
||||
$self->gcodegen->set_origin($self->origin);
|
||||
my @extruder_ids = map { $_->id } @{$self->extruders};
|
||||
my @extruder_ids = map { $_->id } @{$self->gcodegen->writer->extruders};
|
||||
$gcode .= $self->gcodegen->set_extruder($extruder_ids[0]);
|
||||
# skip skirt if we have a large brim
|
||||
if ($layer->id < $self->print->config->skirt_height || $self->print->config->skirt_height == -1) {
|
||||
@ -136,8 +136,8 @@ sub process_layer {
|
||||
|
||||
# tweak region ordering to save toolchanges
|
||||
my @region_ids = 0 .. ($self->print->region_count-1);
|
||||
if ($self->gcodegen->multiple_extruders) {
|
||||
my $last_extruder_id = $self->gcodegen->extruder->id;
|
||||
if ($self->gcodegen->writer->multiple_extruders) {
|
||||
my $last_extruder_id = $self->gcodegen->writer->extruder->id;
|
||||
my $best_region_id = first { $self->print->regions->[$_]->config->perimeter_extruder-1 == $last_extruder_id } @region_ids;
|
||||
@region_ids = ($best_region_id, grep $_ != $best_region_id, @region_ids) if $best_region_id;
|
||||
}
|
||||
@ -176,7 +176,7 @@ sub process_layer {
|
||||
# give priority to infill if we were already using its extruder and it wouldn't
|
||||
# be good for perimeters
|
||||
if ($self->print->config->infill_first
|
||||
|| ($self->gcodegen->multiple_extruders && $region->config->infill_extruder-1 == $self->gcodegen->extruder->id && $region->config->infill_extruder != $region->config->perimeter_extruder)) {
|
||||
|| ($self->gcodegen->writer->multiple_extruders && $region->config->infill_extruder-1 == $self->gcodegen->writer->extruder->id && $region->config->infill_extruder != $region->config->perimeter_extruder)) {
|
||||
$gcode .= $self->_extrude_infill($infill_by_island[$i], $region);
|
||||
$gcode .= $self->_extrude_perimeters($perimeters_by_island[$i], $region);
|
||||
} else {
|
||||
|
||||
@ -21,10 +21,10 @@ sub pre_toolchange {
|
||||
|
||||
if ($gcodegen->config->standby_temperature_delta != 0) {
|
||||
my $temp = defined $gcodegen->layer && $gcodegen->layer->id == 0
|
||||
? $gcodegen->config->get_at('first_layer_temperature', $gcodegen->extruder->id)
|
||||
: $gcodegen->config->get_at('temperature', $gcodegen->extruder->id);
|
||||
? $gcodegen->config->get_at('first_layer_temperature', $gcodegen->writer->extruder->id)
|
||||
: $gcodegen->config->get_at('temperature', $gcodegen->writer->extruder->id);
|
||||
# we assume that heating is always slower than cooling, so no need to block
|
||||
$gcode .= $gcodegen->set_temperature($temp + $gcodegen->config->standby_temperature_delta, 0);
|
||||
$gcode .= $gcodegen->writer->set_temperature($temp + $gcodegen->config->standby_temperature_delta, 0);
|
||||
}
|
||||
|
||||
return $gcode;
|
||||
@ -37,9 +37,9 @@ sub post_toolchange {
|
||||
|
||||
if ($gcodegen->config->standby_temperature_delta != 0) {
|
||||
my $temp = defined $gcodegen->layer && $gcodegen->layer->id == 0
|
||||
? $gcodegen->config->get_at('first_layer_temperature', $gcodegen->extruder->id)
|
||||
: $gcodegen->config->get_at('temperature', $gcodegen->extruder->id);
|
||||
$gcode .= $gcodegen->set_temperature($temp, 1);
|
||||
? $gcodegen->config->get_at('first_layer_temperature', $gcodegen->writer->extruder->id)
|
||||
: $gcodegen->config->get_at('temperature', $gcodegen->writer->extruder->id);
|
||||
$gcode .= $gcodegen->writer->set_temperature($temp, 1);
|
||||
}
|
||||
|
||||
return $gcode;
|
||||
|
||||
@ -41,6 +41,26 @@ sub set_extruders {
|
||||
$self->multiple_extruders(max(@$extruder_ids) > 0);
|
||||
}
|
||||
|
||||
sub preamble {
|
||||
my ($self) = @_;
|
||||
|
||||
my $gcode = "";
|
||||
|
||||
if ($self->config->gcode_flavor ne 'makerware') {
|
||||
$gcode .= "G21 ; set units to millimeters\n";
|
||||
$gcode .= "G90 ; use absolute coordinates\n";
|
||||
}
|
||||
if ($self->config->gcode_flavor =~ /^(?:reprap|teacup)$/) {
|
||||
if ($self->config->use_relative_e_distances) {
|
||||
$gcode .= "M83 ; use relative distances for extrusion\n";
|
||||
} else {
|
||||
$gcode .= "M82 ; use absolute distances for extrusion\n";
|
||||
}
|
||||
$gcode .= $self->reset_e(1);
|
||||
}
|
||||
return $gcode;
|
||||
}
|
||||
|
||||
sub set_temperature {
|
||||
my ($self, $temperature, $wait, $tool) = @_;
|
||||
|
||||
|
||||
@ -772,16 +772,16 @@ sub write_gcode {
|
||||
my $gcodegen = Slic3r::GCode->new(
|
||||
placeholder_parser => $self->placeholder_parser,
|
||||
layer_count => $layer_count,
|
||||
enable_cooling_markers => 1,
|
||||
);
|
||||
$gcodegen->apply_print_config($self->config);
|
||||
$gcodegen->set_extruders($self->extruders);
|
||||
|
||||
print $fh "G21 ; set units to millimeters\n" if $self->config->gcode_flavor ne 'makerware';
|
||||
print $fh $gcodegen->set_fan(0, 1) if $self->config->cooling && $self->config->disable_fan_first_layers;
|
||||
print $fh $gcodegen->writer->set_fan(0, 1) if $self->config->cooling && $self->config->disable_fan_first_layers;
|
||||
|
||||
# set bed temperature
|
||||
if ((my $temp = $self->config->first_layer_bed_temperature) && $self->config->start_gcode !~ /M(?:190|140)/i) {
|
||||
printf $fh $gcodegen->set_bed_temperature($temp, 1);
|
||||
printf $fh $gcodegen->writer->set_bed_temperature($temp, 1);
|
||||
}
|
||||
|
||||
# set extruder(s) temperature before and after start G-code
|
||||
@ -792,7 +792,7 @@ sub write_gcode {
|
||||
for my $t (@{$self->extruders}) {
|
||||
my $temp = $self->config->get_at('first_layer_temperature', $t);
|
||||
$temp += $self->config->standby_temperature_delta if $self->config->ooze_prevention;
|
||||
printf $fh $gcodegen->set_temperature($temp, $wait, $t) if $temp > 0;
|
||||
printf $fh $gcodegen->writer->set_temperature($temp, $wait, $t) if $temp > 0;
|
||||
}
|
||||
};
|
||||
$print_first_layer_temperature->(0);
|
||||
@ -800,15 +800,7 @@ sub write_gcode {
|
||||
$print_first_layer_temperature->(1);
|
||||
|
||||
# set other general things
|
||||
print $fh "G90 ; use absolute coordinates\n" if $self->config->gcode_flavor ne 'makerware';
|
||||
if ($self->config->gcode_flavor =~ /^(?:reprap|teacup)$/) {
|
||||
printf $fh $gcodegen->reset_e;
|
||||
if ($self->config->use_relative_e_distances) {
|
||||
print $fh "M83 ; use relative distances for extrusion\n";
|
||||
} else {
|
||||
print $fh "M82 ; use absolute distances for extrusion\n";
|
||||
}
|
||||
}
|
||||
print $fh $gcodegen->writer->preamble;
|
||||
|
||||
# initialize a motion planner for object-to-object travel moves
|
||||
if ($self->config->avoid_crossing_perimeters) {
|
||||
@ -893,7 +885,7 @@ sub write_gcode {
|
||||
# another one, set first layer temperatures. this happens before the Z move
|
||||
# is triggered, so machine has more time to reach such temperatures
|
||||
if ($layer->id == 0 && $finished_objects > 0) {
|
||||
printf $fh $gcodegen->set_bed_temperature($self->config->first_layer_bed_temperature),
|
||||
printf $fh $gcodegen->writer->set_bed_temperature($self->config->first_layer_bed_temperature),
|
||||
if $self->config->first_layer_bed_temperature;
|
||||
$print_first_layer_temperature->();
|
||||
}
|
||||
@ -944,12 +936,12 @@ sub write_gcode {
|
||||
|
||||
# write end commands to file
|
||||
print $fh $gcodegen->retract;
|
||||
print $fh $gcodegen->set_fan(0);
|
||||
print $fh $gcodegen->writer->set_fan(0);
|
||||
printf $fh "%s\n", $gcodegen->placeholder_parser->process($self->config->end_gcode);
|
||||
|
||||
$self->total_used_filament(0);
|
||||
$self->total_extruded_volume(0);
|
||||
foreach my $extruder (@{$gcodegen->extruders}) {
|
||||
foreach my $extruder (@{$gcodegen->writer->extruders}) {
|
||||
my $used_filament = $extruder->used_filament;
|
||||
my $extruded_volume = $extruder->extruded_volume;
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user