diff --git a/t/bridges.t b/t/bridges.t
index d0d8e6d7e..424ed0b73 100644
--- a/t/bridges.t
+++ b/t/bridges.t
@@ -1,4 +1,4 @@
-use Test::More tests => 4;
+use Test::More tests => 8;
 use strict;
 use warnings;
 
@@ -12,6 +12,64 @@ use Slic3r;
 use Slic3r::Geometry qw(scale epsilon rad2deg PI);
 use Slic3r::Test;
 
+my $full_test = sub {
+    my ($bd) = @_;
+    {
+        my $test = sub {
+            my ($bridge_size, $expected_angle) = @_;
+        
+            my ($x, $y) = @$bridge_size;
+            my $lower = Slic3r::ExPolygon->new(
+                Slic3r::Polygon->new_scale([-2,-2], [$x+2,-2], [$x+2,$y+2], [-2,$y+2]),
+                Slic3r::Polygon->new_scale([0,0], [0,$y], [$x,$y], [$x,0]),
+            );
+            $lower->translate(scale 20, scale 20); # avoid negative coordinates for easier SVG preview
+            my $bridge = $lower->[1]->clone;
+            $bridge->reverse;
+            $bridge = Slic3r::ExPolygon->new($bridge);
+            $bd->lower_slices([$lower]);
+        
+            ok check_angle($bd, $bridge, $expected_angle), 'correct bridge angle for O-shaped overhang';
+        };
+    
+        $test->([20,10], 90);
+        $test->([10,20],  0);
+    }
+
+    {
+        my $bridge = Slic3r::ExPolygon->new(
+            Slic3r::Polygon->new_scale([0,0], [20,0], [20,10], [0,10]),
+        );
+        my $lower = [
+            Slic3r::ExPolygon->new(
+                Slic3r::Polygon->new_scale([-2,0], [0,0], [0,10], [-2,10]),
+            ),
+        ];
+        $_->translate(scale 20, scale 20) for $bridge, @$lower; # avoid negative coordinates for easier SVG preview
+    
+        $lower->[1] = $lower->[0]->clone;
+        $lower->[1]->translate(scale 22, 0);
+    
+        $bd->lower_slices($lower);
+        ok check_angle($bd, $bridge, 0), 'correct bridge angle for two-sided bridge';
+    }
+
+    {
+        my $bridge = Slic3r::ExPolygon->new(
+            Slic3r::Polygon->new_scale([0,0], [20,0], [10,10], [0,10]),
+        );
+        my $lower = [
+            Slic3r::ExPolygon->new(
+                Slic3r::Polygon->new_scale([0,0], [0,10], [10,10], [10,12], [-2,12], [-2,-2], [22,-2], [22,0]),
+            ),
+        ];
+        $_->translate(scale 20, scale 20) for $bridge, @$lower; # avoid negative coordinates for easier SVG preview
+    
+        $bd->lower_slices($lower);
+        ok check_angle($bd, $bridge, 135), 'correct bridge angle for C-shaped overhang';
+    }
+};
+
 my $flow = Slic3r::Flow->new(width => 0.5, spacing => 0.45, nozzle_diameter => 0.5);
 my $bd = Slic3r::Layer::BridgeDetector->new(
     lower_slices    => [],
@@ -19,63 +77,17 @@ my $bd = Slic3r::Layer::BridgeDetector->new(
     infill_flow     => $flow,
 );
 
-{
-    my $test = sub {
-        my ($bridge_size, $expected_angle) = @_;
-        
-        my ($x, $y) = @$bridge_size;
-        my $lower = Slic3r::ExPolygon->new(
-            Slic3r::Polygon->new_scale([-2,-2], [$x+2,-2], [$x+2,$y+2], [-2,$y+2]),
-            Slic3r::Polygon->new_scale([0,0], [0,$y], [$x,$y], [$x,0]),
-        );
-        $lower->translate(scale 20, scale 20); # avoid negative coordinates for easier SVG preview
-        my $bridge = $lower->[1]->clone;
-        $bridge->reverse;
-        $bridge = Slic3r::ExPolygon->new($bridge);
-        $bd->lower_slices([$lower]);
-        
-        ok check_angle($bd->detect_angle($bridge), $expected_angle), 'correct bridge angle for O-shaped overhang';
-    };
-    
-    $test->([20,10], 90);
-    $test->([10,20],  0);
-}
+$full_test->($bd);
 
-{
-    my $bridge = Slic3r::ExPolygon->new(
-        Slic3r::Polygon->new_scale([0,0], [20,0], [20,10], [0,10]),
-    );
-    my $lower = [
-        Slic3r::ExPolygon->new(
-            Slic3r::Polygon->new_scale([-2,0], [0,0], [0,10], [-2,10]),
-        ),
-    ];
-    $_->translate(scale 20, scale 20) for $bridge, @$lower; # avoid negative coordinates for easier SVG preview
-    
-    $lower->[1] = $lower->[0]->clone;
-    $lower->[1]->translate(scale 22, 0);
-    
-    $bd->lower_slices($lower);
-    ok check_angle($bd->detect_angle($bridge), 0), 'correct bridge angle for two-sided bridge';
-}
+# infill flow larger than perimeter flow
+$bd->infill_flow(Slic3r::Flow->new(width => 0.9, spacing => 0.85, nozzle_diameter => 0.5));
+$full_test->($bd);
 
-{
-    my $bridge = Slic3r::ExPolygon->new(
-        Slic3r::Polygon->new_scale([0,0], [20,0], [10,10], [0,10]),
-    );
-    my $lower = [
-        Slic3r::ExPolygon->new(
-            Slic3r::Polygon->new_scale([0,0], [0,10], [10,10], [10,12], [-2,12], [-2,-2], [22,-2], [22,0]),
-        ),
-    ];
-    $_->translate(scale 20, scale 20) for $bridge, @$lower; # avoid negative coordinates for easier SVG preview
-    
-    $bd->lower_slices($lower);
-    ok check_angle($bd->detect_angle($bridge), 135), 'correct bridge angle for C-shaped overhang';
-}
 
 sub check_angle {
-    my ($result, $expected) = @_;
+    my ($bd, $bridge, $expected) = @_;
+    
+    my $result = $bd->detect_angle($bridge);
     
     # our epsilon is equal to the steps used by the bridge detection algorithm
     ###use XXX; YYY [ rad2deg($result), $expected ];