3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

improve description

Browse Source
This commit is contained in:
Pavel Mikus 2023-02-22 15:30:52 +01:00 committed by Pavel Mikuš
parent 59faa86915
commit 278f633a3d
1 changed files with 11 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
src/libslic3r/PrintConfig.cpp
View File

@ -534,19 +534,19 @@ void PrintConfigDef::init_fff_params()
def = this->add("enable_dynamic_overhang_speeds", coBool);
def->label = L("Enable dynamic overhang speeds");
def->category = L("Speed");
def->tooltip = L("This setting enables dynamic speed control on overhangs."
"Overhang size is expressed as a percentage of overlap of the extrusion with the previous layer - "
"100% represents full overlap - no overhang is present, while 0% represents full overhang (floating extrusion, bridge). "
"You can set speed for each overhang size listed below. Speeds for overhang levels in between are "
"calculated via linear interpolation. If set as percentage, the speed is calculated over the external perimeter speed."
);
def->tooltip = L("This setting enables dynamic speed control on overhangs.");
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
auto overhang_speed_setting_description = L("Overhang size is expressed as a percentage of overlap of the extrusion with the previous layer: "
"100% would be full overlap (no overhang), while 0% represents full overhang (floating extrusion, bridge). "
"Speeds for overhang sizes in between are calculated via linear interpolation. "
"If set as percentage, the speed is calculated over the external perimeter speed.");
def = this->add("overhang_speed_0", coFloatOrPercent);
def->label = L("speed for 0\% overlap (bridge)");
def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->tooltip = overhang_speed_setting_description;
def->sidetext = L("mm/s or %");
def->min = 0;
def->mode = comAdvanced;
@ -555,7 +555,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("overhang_speed_1", coFloatOrPercent);
def->label = L("speed for 20\% overlap");
def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->tooltip = overhang_speed_setting_description;
def->sidetext = L("mm/s or %");
def->min = 0;
def->mode = comAdvanced;
@ -564,7 +564,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("overhang_speed_2", coFloatOrPercent);
def->label = L("speed for 40\% overlap");
def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->tooltip = overhang_speed_setting_description;
def->sidetext = L("mm/s or %");
def->min = 0;
def->mode = comAdvanced;
@ -573,7 +573,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("overhang_speed_3", coFloatOrPercent);
def->label = L("speed for 60\% overlap");
def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->tooltip = overhang_speed_setting_description;
def->sidetext = L("mm/s or %");
def->min = 0;
def->mode = comAdvanced;
@ -582,7 +582,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("overhang_speed_4", coFloatOrPercent);
def->label = L("speed for 80\% overlap");
def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->tooltip = overhang_speed_setting_description;
def->sidetext = L("mm/s or %");
def->min = 0;
def->mode = comAdvanced;