diff --git a/src/PrusaSlicer.cpp b/src/PrusaSlicer.cpp
index 9874a9d4d..7972d49b7 100644
--- a/src/PrusaSlicer.cpp
+++ b/src/PrusaSlicer.cpp
@@ -140,37 +140,57 @@ int CLI::run(int argc, char **argv)
m_print_config.apply(config);
}
- // Read input file(s) if any.
- for (const std::string &file : m_input_files) {
- if (! boost::filesystem::exists(file)) {
- boost::nowide::cerr << "No such file: " << file << std::endl;
- exit(1);
+#if ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
+ // are we starting as gcodeviewer ?
+ for (auto it = m_actions.begin(); it != m_actions.end(); ++it) {
+ if (*it == "gcodeviewer") {
+ start_gui = true;
+ start_as_gcodeviewer = true;
+ m_actions.erase(it);
+ break;
}
- Model model;
- try {
- // When loading an AMF or 3MF, config is imported as well, including the printer technology.
- DynamicPrintConfig config;
- model = Model::read_from_file(file, &config, true);
- PrinterTechnology other_printer_technology = Slic3r::printer_technology(config);
- if (printer_technology == ptUnknown) {
- printer_technology = other_printer_technology;
- } else if (printer_technology != other_printer_technology && other_printer_technology != ptUnknown) {
- boost::nowide::cerr << "Mixing configurations for FFF and SLA technologies" << std::endl;
+ }
+#endif // ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
+
+ // Read input file(s) if any.
+#if ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
+ if (!start_as_gcodeviewer) {
+#endif // ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
+ for (const std::string& file : m_input_files) {
+ if (!boost::filesystem::exists(file)) {
+ boost::nowide::cerr << "No such file: " << file << std::endl;
+ exit(1);
+ }
+ Model model;
+ try {
+ // When loading an AMF or 3MF, config is imported as well, including the printer technology.
+ DynamicPrintConfig config;
+ model = Model::read_from_file(file, &config, true);
+ PrinterTechnology other_printer_technology = Slic3r::printer_technology(config);
+ if (printer_technology == ptUnknown) {
+ printer_technology = other_printer_technology;
+ }
+ else if (printer_technology != other_printer_technology && other_printer_technology != ptUnknown) {
+ boost::nowide::cerr << "Mixing configurations for FFF and SLA technologies" << std::endl;
+ return 1;
+ }
+ // config is applied to m_print_config before the current m_config values.
+ config += std::move(m_print_config);
+ m_print_config = std::move(config);
+ }
+ catch (std::exception& e) {
+ boost::nowide::cerr << file << ": " << e.what() << std::endl;
return 1;
}
- // config is applied to m_print_config before the current m_config values.
- config += std::move(m_print_config);
- m_print_config = std::move(config);
- } catch (std::exception &e) {
- boost::nowide::cerr << file << ": " << e.what() << std::endl;
- return 1;
+ if (model.objects.empty()) {
+ boost::nowide::cerr << "Error: file is empty: " << file << std::endl;
+ continue;
+ }
+ m_models.push_back(model);
}
- if (model.objects.empty()) {
- boost::nowide::cerr << "Error: file is empty: " << file << std::endl;
- continue;
- }
- m_models.push_back(model);
+#if ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
}
+#endif // ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
// Apply command line options to a more specific DynamicPrintConfig which provides normalize()
// (command line options override --load files)
@@ -529,9 +549,11 @@ int CLI::run(int argc, char **argv)
<< " (" << print.total_extruded_volume()/1000 << "cm3)" << std::endl;
*/
}
+#if !ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
} else if (opt_key == "gcodeviewer") {
- start_gui = true;
+ start_gui = true;
start_as_gcodeviewer = true;
+#endif // !ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
} else {
boost::nowide::cerr << "error: option not supported yet: " << opt_key << std::endl;
return 1;
@@ -555,28 +577,43 @@ int CLI::run(int argc, char **argv)
// gui->autosave = m_config.opt_string("autosave");
GUI::GUI_App::SetInstance(gui);
+#if ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
+ gui->CallAfter([gui, this, &load_configs, start_as_gcodeviewer] {
+#else
gui->CallAfter([gui, this, &load_configs] {
+#endif // ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
+
if (!gui->initialized()) {
return;
}
+
+#if ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
+ if (start_as_gcodeviewer) {
+ if (!m_input_files.empty())
+ gui->plater()->load_gcode(wxString::FromUTF8(m_input_files[0]));
+ } else {
+#endif // ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
#if 0
- // Load the cummulative config over the currently active profiles.
- //FIXME if multiple configs are loaded, only the last one will have an effect.
- // We need to decide what to do about loading of separate presets (just print preset, just filament preset etc).
- // As of now only the full configs are supported here.
- if (!m_print_config.empty())
- gui->mainframe->load_config(m_print_config);
+ // Load the cummulative config over the currently active profiles.
+ //FIXME if multiple configs are loaded, only the last one will have an effect.
+ // We need to decide what to do about loading of separate presets (just print preset, just filament preset etc).
+ // As of now only the full configs are supported here.
+ if (!m_print_config.empty())
+ gui->mainframe->load_config(m_print_config);
#endif
- if (! load_configs.empty())
- // Load the last config to give it a name at the UI. The name of the preset may be later
- // changed by loading an AMF or 3MF.
- //FIXME this is not strictly correct, as one may pass a print/filament/printer profile here instead of a full config.
- gui->mainframe->load_config_file(load_configs.back());
- // If loading a 3MF file, the config is loaded from the last one.
- if (! m_input_files.empty())
- gui->plater()->load_files(m_input_files, true, true);
- if (! m_extra_config.empty())
- gui->mainframe->load_config(m_extra_config);
+ if (!load_configs.empty())
+ // Load the last config to give it a name at the UI. The name of the preset may be later
+ // changed by loading an AMF or 3MF.
+ //FIXME this is not strictly correct, as one may pass a print/filament/printer profile here instead of a full config.
+ gui->mainframe->load_config_file(load_configs.back());
+ // If loading a 3MF file, the config is loaded from the last one.
+ if (!m_input_files.empty())
+ gui->plater()->load_files(m_input_files, true, true);
+ if (!m_extra_config.empty())
+ gui->mainframe->load_config(m_extra_config);
+#if ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
+ }
+#endif // ENABLE_GCODE_VIEWER_AS_STANDALONE_APPLICATION
});
int result = wxEntry(argc, argv);
return result;
diff --git a/src/libslic3r/GCodeReader.cpp b/src/libslic3r/GCodeReader.cpp
index ab77b0141..ee24d5bb7 100644
--- a/src/libslic3r/GCodeReader.cpp
+++ b/src/libslic3r/GCodeReader.cpp
@@ -1,6 +1,9 @@
#include "GCodeReader.hpp"
#include <boost/algorithm/string/classification.hpp>
#include <boost/algorithm/string/split.hpp>
+#if ENABLE_GCODE_VIEWER
+#include <boost/nowide/fstream.hpp>
+#endif // ENABLE_GCODE_VIEWER
#include <fstream>
#include <iostream>
#include <iomanip>
@@ -113,7 +116,11 @@ void GCodeReader::update_coordinates(GCodeLine &gline, std::pair<const char*, co
void GCodeReader::parse_file(const std::string &file, callback_t callback)
{
+#if ENABLE_GCODE_VIEWER
+ boost::nowide::ifstream f(file);
+#else
std::ifstream f(file);
+#endif // ENABLE_GCODE_VIEWER
std::string line;
#if ENABLE_GCODE_VIEWER
m_parsing_file = true;
diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp
index b313a50eb..aeac415f7 100644
--- a/src/slic3r/GUI/GUI_App.cpp
+++ b/src/slic3r/GUI/GUI_App.cpp
@@ -228,7 +228,6 @@ public:
memDC.SelectObject(wxNullBitmap);
SetBmp(bitmap);
}
- wxYield();
}
void SetBmp(wxBitmap& bmp)