diff --git a/resources/profiles/PrusaResearch.idx b/resources/profiles/PrusaResearch.idx index 8c14026ce..dc3c79cd5 100644 --- a/resources/profiles/PrusaResearch.idx +++ b/resources/profiles/PrusaResearch.idx @@ -1,159 +1,161 @@ -min_slic3r_version = 2.3.0-rc1 -1.2.4 Updated cost/density values in filament settings. Various changes in print settings. -1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles. -1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. -1.2.1 Updated FW version for MK2.5 family printers. -1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version. -min_slic3r_version = 2.3.0-beta2 -1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values. -min_slic3r_version = 2.3.0-beta0 -1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights. -min_slic3r_version = 2.3.0-alpha4 -1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles. -1.2.0-alpha0 Added filament spool weights -min_slic3r_version = 2.2.0-alpha3 -1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles. -1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. -1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles. -1.1.10 Updated firmware version. -1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials. -1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles. -1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles. -1.1.6 Updated firmware version for MK2.5/S and MK3/S. -1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend -1.1.4 Added Prusament PC Blend filament profile. -1.1.3 Added SLA material and filament profile -1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET. -1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS. -1.1.1-beta Updated for PrusaSlicer 2.2.0-beta -1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc -1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer. -# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer, -# so they will see the print bed. -max_slic3r_version = 2.2.0-alpha2 -min_slic3r_version = 2.2.0-alpha0 -1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles. -1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0 -min_slic3r_version = 2.1.1-beta0 -1.0.11 Updated firmware version. -1.0.10 Updated firmware version for MK2.5/S and MK3/S. -1.0.9 Updated firmware version for MK2.5/S and MK3/S. -1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog. -1.0.7 Updated layer height limits for MINI -1.0.6 Added Prusa MINI profiles -min_slic3r_version = 2.1.0-alpha0 -1.0.5 Added SLA materials -1.0.4 Updated firmware version and 0.25mm nozzle profiles -1.0.3 Added filament profiles -1.0.2 Added SLA materials -1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers. -1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports. -1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament. -1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times -1.0.0-alpha2 Printer model and nozzle diameter check -1.0.0-alpha1 Added Prusament ASA profile -1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX -min_slic3r_version = 1.42.0-alpha6 -0.8.10 Updated firmware version. -0.8.9 Updated firmware version for MK2.5/S and MK3/S. -0.8.8 Updated firmware version for MK2.5/S and MK3/S. -0.8.7 Updated firmware version -0.8.6 Updated firmware version for MK2.5/S and MK3/S -0.8.5 Updated SL1 printer and material settings -0.8.4 Added Prusament ASA profile -0.8.3 FW version and SL1 materials update -0.8.2 FFF and SL1 settings update -0.8.1 Output settings and SLA materials update -0.8.0 Updated for the PrusaSlicer 2.0.0 final release -0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S -0.8.0-rc1 Updated SLA profiles -0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release -0.8.0-beta4 Updated SLA profiles -0.8.0-beta3 Updated SLA profiles -0.8.0-beta2 Updated SLA profiles -0.8.0-beta1 Updated SLA profiles -0.8.0-beta Updated SLA profiles -0.8.0-alpha9 Updated SLA and FFF profiles -0.8.0-alpha8 Updated SLA profiles -0.8.0-alpha7 Updated SLA profiles -0.8.0-alpha6 Updated SLA profiles -min_slic3r_version = 1.42.0-alpha -0.8.0-alpha Updated SLA profiles -0.4.0-alpha4 Updated SLA profiles -0.4.0-alpha3 Update of SLA profiles -0.4.0-alpha2 First SLA profiles -min_slic3r_version = 1.41.3-alpha -0.4.12 Updated firmware version for MK2.5/S and MK3/S. -0.4.11 Updated firmware version for MK2.5/S and MK3/S. -0.4.10 Updated firmware version -0.4.9 Updated firmware version for MK2.5/S and MK3/S -0.4.8 MK2.5/3/S FW update -0.4.7 MK2/S/MMU FW update -0.4.6 Updated firmware versions for MK2.5/S and MK3/S -0.4.5 Enabled remaining time support for MK2/S/MMU1 -0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt -0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt -0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt -0.4.1 New MK2.5S and MK3S FW versions -0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt -min_slic3r_version = 1.41.1 -0.3.11 Updated firmware version for MK2.5/S and MK3/S. -0.3.10 Updated firmware version -0.3.9 Updated firmware version for MK2.5/S and MK3/S -0.3.8 MK2.5/3/S FW update -0.3.7 MK2/S/MMU FW update -0.3.6 Updated firmware versions for MK2.5 and MK3 -0.3.5 New MK2.5 and MK3 FW versions -0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt -0.3.3 Prusament PETG released -0.3.2 New MK2.5 and MK3 FW versions -0.3.1 New MK2.5 and MK3 FW versions -0.3.0 New MK2.5 and MK3 FW version -min_slic3r_version = 1.41.0-alpha -0.2.9 New MK2.5 and MK3 FW versions -0.2.8 New MK2.5 and MK3 FW version -min_slic3r_version = 1.41.1 -0.2.7 New MK2.5 and MK3 FW version -0.2.6 Added MMU2 MK2.5 settings -min_slic3r_version = 1.41.0-alpha -0.2.5 Prusament is out - added prusament settings -0.2.4 Added soluble support profiles for MMU2 -0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit -0.2.2 Edited MMU2 Single mode purge line -0.2.1 Added PET and BVOH settings for MMU2 -0.2.0-beta5 Fixed MMU1 ramming parameters -0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower -0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2 -0.2.0-beta2 Edited first layer speed and wipe tower position -0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles -0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets. -0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references -0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version -0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2 -0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers. -0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost -0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material -0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0 -0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters -min_slic3r_version = 1.40.0 -0.1.18 Updated firmware version -0.1.17 Updated firmware version for MK2.5/S and MK3/S -0.1.16 MK2.5/3/S FW update -0.1.15 MK2/S/MMU FW update -0.1.14 Updated firmware versions for MK2.5 and MK3 -0.1.13 New MK2.5 and MK3 FW versions -0.1.12 New MK2.5 and MK3 FW versions -0.1.11 fw version changed to 3.3.1 -0.1.10 MK3 jerk and acceleration update -0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles -0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes -0.1.7 Fixed errors in 0.25mm and 0.6mm profiles -0.1.6 Split the MK2.5 profile from the MK2S -min_slic3r_version = 1.40.0-beta -0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles -0.1.4 edited fw version, added z-raise after print -min_slic3r_version = 1.40.0-alpha -0.1.3 Fixed an incorrect position of the max_print_height parameter -0.1.2 Wipe tower changes -0.1.1 Minor print speed adjustments -0.1.0 Initial +min_slic3r_version = 2.4.0-alpha0 +1.3.0-alpha0 Disabled thick bridges, updated support settings. +min_slic3r_version = 2.3.0-rc1 +1.2.4 Updated cost/density values in filament settings. Various changes in print settings. +1.2.3 Updated firmware version. Updated end g-code in MMU2 printer profiles. +1.2.2 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. +1.2.1 Updated FW version for MK2.5 family printers. +1.2.0 Added full_fan_speed_layer value for PETG. Increased support interface spacing for 0.6mm nozzle profiles. Updated firmware version. +min_slic3r_version = 2.3.0-beta2 +1.2.0-beta1 Updated end g-code. Added full_fan_speed_layer values. +min_slic3r_version = 2.3.0-beta0 +1.2.0-beta0 Adjusted infill anchor limits. Added filament spool weights. +min_slic3r_version = 2.3.0-alpha4 +1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles. +1.2.0-alpha0 Added filament spool weights +min_slic3r_version = 2.2.0-alpha3 +1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles. +1.1.12 Added Prusament PVB filament profile. Added 0.8mm nozzle profiles. +1.1.11 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles. +1.1.10 Updated firmware version. +1.1.9 Updated K values in filament profiles (linear advance). Added new filament profiles and SLA materials. +1.1.8 Updated start/end g-code scripts for MK3 family printer profiles (reduced extruder motor current for some print profiles). Added new filament and SLA material profiles. +1.1.7 Updated end g-code for MMU2 Single printer profiles. Added/updated filament and SLA material profiles. +1.1.6 Updated firmware version for MK2.5/S and MK3/S. +1.1.5 Updated MMU1 specific retraction settings for Prusament PC Blend +1.1.4 Added Prusament PC Blend filament profile. +1.1.3 Added SLA material and filament profile +1.1.2 Added renamed_from fields for PETG filaments to indicate that they were renamed from PET. +1.1.1 Added Verbatim and Fiberlogy PETG filament profiles. Updated auto cooling settings for ABS. +1.1.1-beta Updated for PrusaSlicer 2.2.0-beta +1.1.1-alpha4 Extended list of default filaments to be installed, top/bottom_solid_min_thickness defined, infill_acceleration changed etc +1.1.1-alpha3 Print bed textures are now configurable from the Preset Bundle. Requires PrusaSlicer 2.2.0-alpha3 and newer. +# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 1.1.1-alpha3 and newer, +# so they will see the print bed. +max_slic3r_version = 2.2.0-alpha2 +min_slic3r_version = 2.2.0-alpha0 +1.1.1-alpha2 Bumped up config version, so our in house customer will get updated profiles. +1.1.0 Filament aliases, Creality profiles and other goodies for PrusaSlicer 2.2.0-alpha0 +min_slic3r_version = 2.1.1-beta0 +1.0.11 Updated firmware version. +1.0.10 Updated firmware version for MK2.5/S and MK3/S. +1.0.9 Updated firmware version for MK2.5/S and MK3/S. +1.0.8 Various changes in FFF profiles, new filaments/materials added. See changelog. +1.0.7 Updated layer height limits for MINI +1.0.6 Added Prusa MINI profiles +min_slic3r_version = 2.1.0-alpha0 +1.0.5 Added SLA materials +1.0.4 Updated firmware version and 0.25mm nozzle profiles +1.0.3 Added filament profiles +1.0.2 Added SLA materials +1.0.1 Updated MK3 firmware version check to 3.8.0, new soluble support profiles for 0.6mm nozzle diameter MMU2S printers. +1.0.0 Updated end G-code for the MMU2 profiles to lift the extruder at the end of print. Wipe tower bridging distance was made smaller for soluble supports. +1.0.0-beta1 Updated color for the ASA filaments to differ from the other filaments. Single extruder printers now have no extruder color assigned, obects and toolpaths will be colored with the color of the active filament. +1.0.0-beta0 Printer model checks in start G-codes, ASA filament profiles, limits on min / max SL1 exposition times +1.0.0-alpha2 Printer model and nozzle diameter check +1.0.0-alpha1 Added Prusament ASA profile +1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX +min_slic3r_version = 1.42.0-alpha6 +0.8.10 Updated firmware version. +0.8.9 Updated firmware version for MK2.5/S and MK3/S. +0.8.8 Updated firmware version for MK2.5/S and MK3/S. +0.8.7 Updated firmware version +0.8.6 Updated firmware version for MK2.5/S and MK3/S +0.8.5 Updated SL1 printer and material settings +0.8.4 Added Prusament ASA profile +0.8.3 FW version and SL1 materials update +0.8.2 FFF and SL1 settings update +0.8.1 Output settings and SLA materials update +0.8.0 Updated for the PrusaSlicer 2.0.0 final release +0.8.0-rc2 Updated firmware versions for MK2.5/S and MK3/S +0.8.0-rc1 Updated SLA profiles +0.8.0-rc Updated for the PrusaSlicer 2.0.0-rc release +0.8.0-beta4 Updated SLA profiles +0.8.0-beta3 Updated SLA profiles +0.8.0-beta2 Updated SLA profiles +0.8.0-beta1 Updated SLA profiles +0.8.0-beta Updated SLA profiles +0.8.0-alpha9 Updated SLA and FFF profiles +0.8.0-alpha8 Updated SLA profiles +0.8.0-alpha7 Updated SLA profiles +0.8.0-alpha6 Updated SLA profiles +min_slic3r_version = 1.42.0-alpha +0.8.0-alpha Updated SLA profiles +0.4.0-alpha4 Updated SLA profiles +0.4.0-alpha3 Update of SLA profiles +0.4.0-alpha2 First SLA profiles +min_slic3r_version = 1.41.3-alpha +0.4.12 Updated firmware version for MK2.5/S and MK3/S. +0.4.11 Updated firmware version for MK2.5/S and MK3/S. +0.4.10 Updated firmware version +0.4.9 Updated firmware version for MK2.5/S and MK3/S +0.4.8 MK2.5/3/S FW update +0.4.7 MK2/S/MMU FW update +0.4.6 Updated firmware versions for MK2.5/S and MK3/S +0.4.5 Enabled remaining time support for MK2/S/MMU1 +0.4.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt +0.4.3 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt +0.4.2 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt +0.4.1 New MK2.5S and MK3S FW versions +0.4.0 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt +min_slic3r_version = 1.41.1 +0.3.11 Updated firmware version for MK2.5/S and MK3/S. +0.3.10 Updated firmware version +0.3.9 Updated firmware version for MK2.5/S and MK3/S +0.3.8 MK2.5/3/S FW update +0.3.7 MK2/S/MMU FW update +0.3.6 Updated firmware versions for MK2.5 and MK3 +0.3.5 New MK2.5 and MK3 FW versions +0.3.4 Changelog: https://github.com/prusa3d/Slic3r-settings/blob/master/live/PrusaResearch/changelog.txt +0.3.3 Prusament PETG released +0.3.2 New MK2.5 and MK3 FW versions +0.3.1 New MK2.5 and MK3 FW versions +0.3.0 New MK2.5 and MK3 FW version +min_slic3r_version = 1.41.0-alpha +0.2.9 New MK2.5 and MK3 FW versions +0.2.8 New MK2.5 and MK3 FW version +min_slic3r_version = 1.41.1 +0.2.7 New MK2.5 and MK3 FW version +0.2.6 Added MMU2 MK2.5 settings +min_slic3r_version = 1.41.0-alpha +0.2.5 Prusament is out - added prusament settings +0.2.4 Added soluble support profiles for MMU2 +0.2.3 Added materials for MMU2 single mode, edited MK3 xy stealth feedrate limit +0.2.2 Edited MMU2 Single mode purge line +0.2.1 Added PET and BVOH settings for MMU2 +0.2.0-beta5 Fixed MMU1 ramming parameters +0.2.0-beta4 Added filament loading speed at start, increased minimal purge on wipe tower +0.2.0-beta3 Edited ramming parameters and filament cooling moves for MMU2 +0.2.0-beta2 Edited first layer speed and wipe tower position +0.2.0-beta Removed limit on the MK3MMU2 height, added legacy M204 S T format to the MK2 profiles +0.2.0-alpha8 Added filament_load/unload_time for the PLA/ABS MMU2 filament presets. +0.2.0-alpha7 Vojtech's fix the incorrect *MK3* references +0.2.0-alpha6 Jindra's way to fix the 0.2.0-alpha5 version +0.2.0-alpha5 Bumped up firmware versions for MK2.5/MK3 to 3.3.1, disabled priming areas for MK3MMU2 +0.2.0-alpha4 Extended the custom start/end G-codes of the MMU2.0 printers for no priming towers. +0.2.0-alpha3 Adjusted machine limits for time estimates, added filament density and cost +0.2.0-alpha2 Renamed the key MK3SMMU to MK3MMU2, added a generic PLA MMU2 material +0.2.0-alpha1 added initial profiles for the i3 MK3 Multi Material Upgrade 2.0 +0.2.0-alpha moved machine limits from the start G-code to the new print profile parameters +min_slic3r_version = 1.40.0 +0.1.18 Updated firmware version +0.1.17 Updated firmware version for MK2.5/S and MK3/S +0.1.16 MK2.5/3/S FW update +0.1.15 MK2/S/MMU FW update +0.1.14 Updated firmware versions for MK2.5 and MK3 +0.1.13 New MK2.5 and MK3 FW versions +0.1.12 New MK2.5 and MK3 FW versions +0.1.11 fw version changed to 3.3.1 +0.1.10 MK3 jerk and acceleration update +0.1.9 edited support extrusion width for 0.25 and 0.6 nozzles +0.1.8 extrusion width for 0,25, 0.6 and variable layer height fixes +0.1.7 Fixed errors in 0.25mm and 0.6mm profiles +0.1.6 Split the MK2.5 profile from the MK2S +min_slic3r_version = 1.40.0-beta +0.1.5 fixed printer_variant fields for the i3 MK3 0.25 and 0.6mm nozzles +0.1.4 edited fw version, added z-raise after print +min_slic3r_version = 1.40.0-alpha +0.1.3 Fixed an incorrect position of the max_print_height parameter +0.1.2 Wipe tower changes +0.1.1 Minor print speed adjustments +0.1.0 Initial diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini index 796d57822..16737d156 100644 --- a/resources/profiles/PrusaResearch.ini +++ b/resources/profiles/PrusaResearch.ini @@ -5,18 +5,15 @@ name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 1.2.4 +config_version = 1.3.0-alpha0 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/ changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% # The printer models will be shown by the Configuration Wizard in this order, # also the first model installed & the first nozzle installed will be activated after install. -#TODO: One day we may differentiate variants of the nozzles / hot ends, -#for example by the melt zone size, or whether the nozzle is hardened. # Printer model name will be shown by the installation wizard. - [printer_model:MINI] name = Original Prusa MINI && MINI+ variants = 0.4; 0.25; 0.6; 0.8 @@ -128,20 +125,21 @@ default_materials = Prusa Orange Tough @0.05 # All presets starting with asterisk, for example *common*, are intermediate and they will # not make it into the user interface. -# Common print preset, mostly derived from MK2 single material with a 0.4mm nozzle. -# All other print presets will derive from the *common* print preset. +# Common print presets + [print:*common*] avoid_crossing_perimeters = 0 +thick_bridges = 0 bridge_acceleration = 1000 bridge_angle = 0 -bridge_flow_ratio = 0.8 -bridge_speed = 20 +bridge_flow_ratio = 1 +bridge_speed = 25 brim_width = 0 clip_multipart_objects = 1 compatible_printers = complete_objects = 0 default_acceleration = 1000 -dont_support_bridges = 1 +dont_support_bridges = 0 elefant_foot_compensation = 0.2 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear @@ -154,7 +152,7 @@ extrusion_width = 0.45 fill_angle = 45 fill_density = 20% fill_pattern = cubic -first_layer_acceleration = 1000 +first_layer_acceleration = 800 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 20 @@ -183,6 +181,7 @@ perimeter_extrusion_width = 0.45 post_process = print_settings_id = raft_layers = 0 +raft_first_layer_density = 90% resolution = 0 seam_position = nearest single_extruder_multi_material_priming = 1 @@ -203,7 +202,7 @@ support_material_interface_extruder = 0 support_material_angle = 0 support_material_buildplate_only = 0 support_material_enforce_layers = 0 -support_material_contact_distance = 0.1 +support_material_contact_distance = 0.2 support_material_interface_contact_loops = 0 support_material_interface_layers = 2 support_material_interface_spacing = 0.2 @@ -212,9 +211,10 @@ support_material_pattern = rectilinear support_material_spacing = 2 support_material_speed = 50 support_material_synchronize_layers = 0 -support_material_threshold = 55 +support_material_threshold = 50 support_material_with_sheath = 0 -support_material_xy_spacing = 50% +support_material_xy_spacing = 60% +support_material_bottom_interface_layers = 0 thin_walls = 0 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 40 @@ -240,20 +240,15 @@ wipe_tower_x = 170 wipe_tower_y = 125 [print:*MK306*] +inherits = *MK3* fill_pattern = gyroid fill_density = 15% -single_extruder_multi_material_priming = 0 -travel_speed = 180 -wipe_tower_x = 170 -wipe_tower_y = 125 - -## MINI [print:*MINI*] fill_pattern = grid travel_speed = 150 wipe_tower = 0 -default_acceleration = 1250 +default_acceleration = 1000 first_layer_acceleration = 800 infill_acceleration = 1000 bridge_acceleration = 1000 @@ -262,7 +257,6 @@ max_print_speed = 150 extruder_clearance_height = 20 extruder_clearance_radius = 35 -# Print parameters common to a 0.25mm diameter nozzle. [print:*0.25nozzle*] elefant_foot_compensation = 0 external_perimeter_extrusion_width = 0.25 @@ -277,7 +271,11 @@ support_material_interface_layers = 0 support_material_interface_spacing = 0.15 support_material_spacing = 1 support_material_xy_spacing = 150% +support_material_contact_distance = 0.1 output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode +thick_bridges = 0 +bridge_flow_ratio = 1 +bridge_speed = 20 [print:*0.25nozzleMK3*] inherits = *0.25nozzle* @@ -288,7 +286,6 @@ infill_speed = 45 solid_infill_speed = 45 top_solid_infill_speed = 30 support_material_speed = 40 -bridge_speed = 20 gap_fill_speed = 30 perimeter_acceleration = 500 infill_acceleration = 1000 @@ -307,7 +304,6 @@ solid_infill_speed = 40 infill_acceleration = 800 first_layer_acceleration = 500 -# Print parameters common to a 0.6mm diameter nozzle. [print:*0.6nozzle*] external_perimeter_extrusion_width = 0.61 extrusion_width = 0.67 @@ -324,6 +320,31 @@ output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_heig infill_anchor_max = 15 top_solid_min_thickness = 0.9 bottom_solid_min_thickness = 0.6 +thick_bridges = 1 +bridge_flow_ratio = 0.95 +bridge_speed = 25 + +[print:*0.6nozzleMK3*] +inherits = *0.6nozzle* +external_perimeter_extrusion_width = 0.65 +extrusion_width = 0.65 +infill_extrusion_width = 0.65 +thick_bridges = 0 + +[print:*0.6nozzleMINI*] +inherits = *0.6nozzleMK3* +infill_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 +fill_pattern = gyroid +fill_density = 15% +travel_speed = 150 +perimeter_acceleration = 800 +infill_acceleration = 1000 +bridge_acceleration = 1000 +first_layer_acceleration = 800 +default_acceleration = 1250 +support_material_speed = 40 +support_material_interface_speed = 100% [print:*0.8nozzle*] external_perimeter_extrusion_width = 0.9 @@ -356,34 +377,12 @@ bridge_flow_ratio = 0.9 perimeter_acceleration = 800 infill_acceleration = 1000 bridge_acceleration = 1000 -first_layer_acceleration = 1000 +first_layer_acceleration = 800 default_acceleration = 1000 top_solid_min_thickness = 1.2 bottom_solid_min_thickness = 0.8 single_extruder_multi_material_priming = 0 - -[print:*0.6nozzleMK3*] -inherits = *0.6nozzle* -external_perimeter_extrusion_width = 0.65 -extrusion_width = 0.65 -infill_extrusion_width = 0.65 -bridge_flow_ratio = 0.95 -bridge_speed = 25 - -[print:*0.6nozzleMINI*] -inherits = *0.6nozzleMK3* -infill_extrusion_width = 0.68 -solid_infill_extrusion_width = 0.68 -fill_pattern = gyroid -fill_density = 15% -travel_speed = 150 -perimeter_acceleration = 800 -infill_acceleration = 1000 -bridge_acceleration = 1000 -first_layer_acceleration = 1000 -default_acceleration = 1250 -support_material_speed = 40 -support_material_interface_speed = 100% +thick_bridges = 1 [print:*soluble_support*] overhangs = 1 @@ -399,29 +398,29 @@ support_material_threshold = 80 support_material_with_sheath = 1 wipe_tower_bridging = 6 support_material_interface_speed = 80% - -# XXXXXXXXXXXXXXXXXXXX -# XXX--- 0.05mm ---XXX -# XXXXXXXXXXXXXXXXXXXX +support_material_bottom_interface_layers = -1 +thick_bridges = 1 [print:*0.05mm*] inherits = *common* +layer_height = 0.05 bottom_solid_layers = 10 bridge_acceleration = 300 -bridge_flow_ratio = 0.7 +bridge_flow_ratio = 1.15 +bridge_speed = 15 default_acceleration = 1000 external_perimeter_speed = 20 fill_density = 20% -first_layer_acceleration = 500 +first_layer_acceleration = 800 gap_fill_speed = 20 infill_acceleration = 800 infill_speed = 30 max_print_speed = 80 small_perimeter_speed = 20 solid_infill_speed = 30 -support_material_extrusion_width = 0.3 +support_material_extrusion_width = 0.33 support_material_spacing = 1.5 -layer_height = 0.05 +support_material_contact_distance = 0.15 perimeter_acceleration = 300 perimeter_speed = 30 perimeters = 3 @@ -429,151 +428,28 @@ support_material_speed = 30 top_solid_infill_speed = 20 top_solid_layers = 15 -[print:0.05mm ULTRADETAIL] -inherits = *0.05mm* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 -infill_extrusion_width = 0.5 - -# MK3 # -[print:0.05mm ULTRADETAIL @MK3] -inherits = *0.05mm*; *MK3* -fill_pattern = gyroid -fill_density = 15% -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material -top_infill_extrusion_width = 0.4 - -# MK2 # -[print:0.05mm ULTRADETAIL @0.25 nozzle] -inherits = *0.05mm*; *0.25nozzle* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 -fill_density = 20% -infill_speed = 20 -max_print_speed = 100 -perimeter_speed = 20 -small_perimeter_speed = 15 -solid_infill_speed = 20 -support_material_speed = 20 - -# MK3 # -[print:0.05mm ULTRADETAIL @0.25 nozzle MK3] -inherits = *0.05mm*; *0.25nozzle*; *MK3* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 -fill_pattern = grid -fill_density = 20% - -# XXXXXXXXXXXXXXXXXXXX -# XXX--- 0.07mm ---XXX -# XXXXXXXXXXXXXXXXXXXX - [print:*0.07mm*] -inherits = *common* -bottom_solid_layers = 8 -bridge_acceleration = 300 -bridge_flow_ratio = 0.7 -bridge_speed = 20 -default_acceleration = 1000 -external_perimeter_speed = 20 -fill_density = 15% -first_layer_acceleration = 500 -gap_fill_speed = 20 -infill_acceleration = 800 -infill_speed = 40 -max_print_speed = 80 -small_perimeter_speed = 20 -solid_infill_speed = 40 -support_material_extrusion_width = 0.3 -support_material_spacing = 1.5 +inherits = *0.05mm* layer_height = 0.07 -perimeter_acceleration = 300 -perimeter_speed = 30 -perimeters = 3 +bottom_solid_layers = 8 +bridge_flow_ratio = 1 +fill_density = 15% +infill_speed = 40 +solid_infill_speed = 40 support_material_speed = 40 top_solid_infill_speed = 30 top_solid_layers = 11 -# MK3 # -[print:0.07mm ULTRADETAIL @MK3] -inherits = *0.07mm*; *MK3* -fill_pattern = gyroid -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material -top_infill_extrusion_width = 0.4 - -[print:0.07mm ULTRADETAIL @0.25 nozzle MK3] -inherits = *0.07mm*; *0.25nozzle*; *MK3* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 -infill_speed = 30 -solid_infill_speed = 30 -support_material_speed = 30 -top_solid_infill_speed = 20 -fill_pattern = grid -fill_density = 20% - -# XXXXXXXXXXXXXXXXXXXX -# XXX--- 0.10mm ---XXX -# XXXXXXXXXXXXXXXXXXXX - -# MK2 # [print:*0.10mm*] inherits = *common* bottom_solid_layers = 7 -bridge_flow_ratio = 0.7 +bridge_flow_ratio = 1 +bridge_speed = 20 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 layer_height = 0.1 perimeter_acceleration = 800 top_solid_layers = 9 - -# MK2 # -[print:0.10mm DETAIL] -inherits = *0.10mm* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 -external_perimeter_speed = 40 -infill_acceleration = 2000 -infill_speed = 60 -perimeter_speed = 50 -solid_infill_speed = 50 -perimeters = 3 - -# MK3 # -[print:0.10mm DETAIL @MK3] -inherits = *0.10mm*; *MK3* -bridge_speed = 30 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 -external_perimeter_speed = 25 -infill_acceleration = 1000 -infill_speed = 80 -max_print_speed = 200 -perimeter_speed = 45 -solid_infill_speed = 80 -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 40 -fill_pattern = gyroid -fill_density = 15% -perimeters = 3 - -# MK2 # -[print:0.10mm DETAIL @0.25 nozzle] -inherits = *0.10mm*; *0.25nozzle* -bridge_acceleration = 600 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 -external_perimeter_speed = 20 -infill_acceleration = 1000 -infill_speed = 40 -perimeter_acceleration = 600 -perimeter_speed = 25 -small_perimeter_speed = 15 -solid_infill_speed = 40 -top_solid_infill_speed = 30 - -# MK3 # -[print:0.10mm DETAIL @0.25 nozzle MK3] -inherits = *0.10mm*; *0.25nozzleMK3*; *MK3* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 -fill_pattern = grid -fill_density = 20% - -# XXXXXXXXXXXXXXXXXXXX -# XXX--- 0.15mm ---XXX -# XXXXXXXXXXXXXXXXXXXX +support_material_contact_distance = 0.17 [print:*0.15mm*] inherits = *common* @@ -587,138 +463,8 @@ perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 7 - -# MK2 # -[print:0.15mm 100mms Linear Advance] -inherits = *0.15mm* -bridge_flow_ratio = 0.95 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 -external_perimeter_speed = 50 -infill_speed = 100 -max_print_speed = 150 -perimeter_speed = 60 -small_perimeter_speed = 30 -solid_infill_speed = 100 -support_material_speed = 60 -top_solid_infill_speed = 70 - -# MK2 # -[print:0.15mm OPTIMAL] -inherits = *0.15mm* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 -top_infill_extrusion_width = 0.45 - -# MK2 # -[print:0.15mm OPTIMAL @0.25 nozzle] -inherits = *0.15mm*; *0.25nozzle* -bridge_acceleration = 600 -bridge_flow_ratio = 0.7 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 -external_perimeter_speed = 20 -infill_acceleration = 1000 -infill_speed = 40 -perimeter_acceleration = 600 -perimeter_speed = 25 -small_perimeter_speed = 15 -solid_infill_speed = 40 -top_solid_infill_speed = 30 - -# MK2 # -[print:0.15mm OPTIMAL @0.6 nozzle] -inherits = *0.15mm*; *0.6nozzle* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 - -# MK3 # -[print:0.15mm QUALITY @MK3] -inherits = *0.15mm*; *MK3* -bridge_speed = 30 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 -external_perimeter_speed = 25 -infill_acceleration = 1000 -infill_speed = 80 -max_print_speed = 200 -perimeter_speed = 45 -solid_infill_speed = 80 -top_solid_infill_speed = 40 -fill_pattern = gyroid -fill_density = 15% - -[print:0.15mm SPEED @MK3] -inherits = *0.15mm*; *MK3* -bridge_speed = 30 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 -external_perimeter_speed = 35 -infill_acceleration = 1000 -infill_speed = 200 -max_print_speed = 200 -perimeter_speed = 60 -solid_infill_speed = 200 -top_solid_infill_speed = 50 - -# MK3 MMU # -[print:0.15mm SOLUBLE FULL @MK3] -inherits = 0.15mm SPEED @MK3; *soluble_support* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 -notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder -support_material_extruder = 5 -support_material_interface_extruder = 5 -perimeter_speed = 40 -solid_infill_speed = 40 -infill_speed = 80 -top_infill_extrusion_width = 0.45 -top_solid_infill_speed = 30 -support_material_speed = 45 - -# MK3 MMU # -[print:0.15mm SOLUBLE INTERFACE @MK3] -inherits = 0.15mm SOLUBLE FULL @MK3 -notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder -support_material_extruder = 0 -support_material_interface_layers = 3 -support_material_with_sheath = 0 - -# MK2 MMU # -[print:0.15mm OPTIMAL SOLUBLE FULL] -inherits = *0.15mm*; *soluble_support* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 -external_perimeter_speed = 25 -notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder -perimeter_speed = 40 -solid_infill_speed = 40 -top_infill_extrusion_width = 0.45 -top_solid_infill_speed = 30 - -# MK2 MMU # -[print:0.15mm OPTIMAL SOLUBLE INTERFACE] -inherits = 0.15mm OPTIMAL SOLUBLE FULL -notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder -support_material_extruder = 0 -support_material_interface_layers = 3 -support_material_with_sheath = 0 -support_material_xy_spacing = 80% - -# MK3 # -[print:0.15mm QUALITY @0.25 nozzle MK3] -inherits = *0.15mm*; *0.25nozzleMK3*; *MK3* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 -fill_pattern = grid -fill_density = 20% - -# MK3 # -[print:0.15mm DETAIL @0.6 nozzle MK3] -inherits = *0.15mm*; *0.6nozzleMK3*; *MK306* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 -external_perimeter_speed = 35 -infill_acceleration = 1000 -infill_speed = 70 -max_print_speed = 100 -perimeter_speed = 45 -solid_infill_speed = 70 -top_solid_infill_speed = 45 - -# XXXXXXXXXXXXXXXXXXXX -# XXX--- 0.20mm ---XXX -# XXXXXXXXXXXXXXXXXXXX +bridge_flow_ratio = 1 +bridge_speed = 25 [print:*0.20mm*] inherits = *common* @@ -734,114 +480,6 @@ solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 5 -# MK2 # -[print:0.20mm 100mms Linear Advance] -inherits = *0.20mm* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 -external_perimeter_speed = 50 -infill_speed = 100 -max_print_speed = 150 -perimeter_speed = 60 -small_perimeter_speed = 30 -solid_infill_speed = 100 -support_material_speed = 60 -top_solid_infill_speed = 70 - -# MK3 # -[print:0.20mm QUALITY @MK3] -inherits = *0.20mm*; *MK3* -bridge_speed = 30 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 -external_perimeter_speed = 25 -infill_acceleration = 1000 -infill_speed = 80 -max_print_speed = 200 -perimeter_speed = 45 -solid_infill_speed = 80 -top_solid_infill_speed = 40 -fill_pattern = gyroid -fill_density = 15% - -[print:0.20mm SPEED @MK3] -inherits = *0.20mm*; *MK3* -bridge_speed = 30 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 -external_perimeter_speed = 35 -infill_acceleration = 1000 -infill_speed = 200 -max_print_speed = 200 -perimeter_speed = 60 -solid_infill_speed = 200 -top_solid_infill_speed = 50 - -# MK3 MMU # -[print:0.20mm SOLUBLE FULL @MK3] -inherits = 0.20mm SPEED @MK3; *soluble_support* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 -notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder -support_material_extruder = 5 -support_material_interface_extruder = 5 -perimeter_speed = 40 -solid_infill_speed = 40 -infill_speed = 80 -top_infill_extrusion_width = 0.45 -top_solid_infill_speed = 30 -support_material_speed = 45 - -# MK3 MMU # -[print:0.20mm SOLUBLE INTERFACE @MK3] -inherits = 0.20mm SOLUBLE FULL @MK3 -notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder -support_material_extruder = 0 -support_material_interface_layers = 3 -support_material_with_sheath = 0 - -# MK2 # -[print:0.20mm NORMAL] -inherits = *0.20mm* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 - -# MK2 # -[print:0.20mm NORMAL @0.6 nozzle] -inherits = *0.20mm*; *0.6nozzle* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 - -# MK2 MMU # -[print:0.20mm NORMAL SOLUBLE FULL] -inherits = *0.20mm*; *soluble_support* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 -external_perimeter_speed = 30 -notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder -perimeter_speed = 40 -solid_infill_speed = 40 -top_solid_infill_speed = 30 - -# MK2 MMU # -[print:0.20mm NORMAL SOLUBLE INTERFACE] -inherits = 0.20mm NORMAL SOLUBLE FULL -notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder -support_material_extruder = 0 -support_material_interface_layers = 3 -support_material_with_sheath = 0 -support_material_xy_spacing = 80% - -# MK3 # -[print:0.20mm DETAIL @0.6 nozzle MK3] -inherits = *0.20mm*; *0.6nozzleMK3*; *MK306* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 -external_perimeter_speed = 35 -infill_acceleration = 1000 -infill_speed = 70 -max_print_speed = 100 -perimeter_speed = 45 -solid_infill_speed = 70 -top_solid_infill_speed = 45 - - -# XXXXXXXXXXXXXXXXXXXX -# XXX--- 0.25mm ---XXX -# XXXXXXXXXXXXXXXXXXXX - [print:*0.25mm*] inherits = *common* bottom_solid_layers = 4 @@ -852,10 +490,6 @@ layer_height = 0.25 perimeter_speed = 50 top_solid_layers = 4 -# XXXXXXXXXXXXXXXXXXXX -# XXX--- 0.30mm ---XXX -# XXXXXXXXXXXXXXXXXXXX - [print:*0.30mm*] inherits = *common* bottom_solid_layers = 4 @@ -869,65 +503,7 @@ perimeter_speed = 50 solid_infill_speed = 50 top_infill_extrusion_width = 0.4 top_solid_layers = 4 - -[print:0.30mm QUALITY @0.6 nozzle MK3] -inherits = *0.30mm*; *0.6nozzleMK3*; *MK306* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 -external_perimeter_speed = 35 -infill_acceleration = 1000 -infill_speed = 70 -max_print_speed = 100 -perimeter_speed = 45 -solid_infill_speed = 70 -top_solid_infill_speed = 45 - -[print:0.30mm SOLUBLE FULL @0.6 nozzle MK3] -inherits = 0.30mm QUALITY @0.6 nozzle MK3; *soluble_support* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 -notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder -support_material_extruder = 5 -support_material_interface_extruder = 5 -support_material_speed = 40 -perimeter_speed = 40 -solid_infill_speed = 40 -top_infill_extrusion_width = 0.6 -support_material_extrusion_width = 0.6 -top_solid_infill_speed = 30 -support_material_xy_spacing = 80% - -[print:0.30mm SOLUBLE INTERFACE @0.6 nozzle MK3] -inherits = 0.30mm SOLUBLE FULL @0.6 nozzle MK3 -notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder -support_material_extruder = 0 -support_material_interface_layers = 3 -support_material_with_sheath = 0 - -[print:0.30mm DRAFT @MK3] -inherits = *0.30mm*; *MK3* -bottom_solid_layers = 3 -bridge_speed = 30 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 -external_perimeter_speed = 35 -infill_acceleration = 1000 -infill_speed = 85 -max_print_speed = 200 -perimeter_speed = 50 -small_perimeter_speed = 30 -solid_infill_speed = 80 -top_solid_infill_speed = 40 -support_material_speed = 45 -external_perimeter_extrusion_width = 0.6 -extrusion_width = 0.5 -first_layer_extrusion_width = 0.42 -infill_extrusion_width = 0.5 -perimeter_extrusion_width = 0.5 -solid_infill_extrusion_width = 0.5 -top_infill_extrusion_width = 0.45 -support_material_extrusion_width = 0.38 - -# XXXXXXXXXXXXXXXXXXXX -# XXX--- 0.35mm ---XXX -# XXXXXXXXXXXXXXXXXXXX +support_material_contact_distance = 0.3 [print:*0.35mm*] inherits = *common* @@ -946,65 +522,6 @@ solid_infill_speed = 60 top_solid_infill_speed = 50 top_solid_layers = 4 -# MK2 # -[print:0.35mm FAST] -inherits = *0.35mm* -bridge_flow_ratio = 0.95 -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 -first_layer_extrusion_width = 0.42 -perimeter_extrusion_width = 0.43 -solid_infill_extrusion_width = 0.7 -top_infill_extrusion_width = 0.43 -support_material_extrusion_width = 0.37 - -# MK2 # -[print:0.35mm FAST @0.6 nozzle] -inherits = *0.35mm*; *0.6nozzle* -# alias = 0.35mm FAST -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 - -# MK2 MMU # -[print:0.35mm FAST sol full @0.6 nozzle] -inherits = *0.35mm*; *0.6nozzle*; *soluble_support* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 -external_perimeter_extrusion_width = 0.6 -external_perimeter_speed = 30 -notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder -perimeter_speed = 40 -support_material_speed = 40 -support_material_interface_layers = 2 -support_material_xy_spacing = 120% -top_infill_extrusion_width = 0.6 -support_material_extrusion_width = 0.6 - -# MK2 MMU # -[print:0.35mm FAST sol int @0.6 nozzle] -inherits = 0.35mm FAST sol full @0.6 nozzle -support_material_extruder = 0 -support_material_interface_layers = 3 -support_material_with_sheath = 0 -support_material_xy_spacing = 150% - -# MK3 # -[print:0.35mm SPEED @0.6 nozzle MK3] -inherits = *0.35mm*; *0.6nozzleMK3*; *MK306* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 -external_perimeter_speed = 35 -infill_acceleration = 1000 -infill_speed = 70 -max_print_speed = 100 -perimeter_speed = 45 -solid_infill_speed = 70 -top_solid_infill_speed = 45 -external_perimeter_extrusion_width = 0.68 -perimeter_extrusion_width = 0.68 -infill_extrusion_width = 0.68 -solid_infill_extrusion_width = 0.68 - -# XXXXXXXXXXXXXXXXXXXX -# XXX--- 0.40mm ---XXX -# XXXXXXXXXXXXXXXXXXXX - [print:*0.40mm*] inherits = *common* bottom_solid_layers = 3 @@ -1022,71 +539,236 @@ solid_infill_speed = 60 top_solid_infill_speed = 40 top_solid_layers = 4 -# MK3 # -[print:0.40mm DRAFT @0.6 nozzle MK3] -inherits = *0.40mm*; *0.6nozzleMK3*; *MK306* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 -external_perimeter_speed = 35 -infill_acceleration = 1000 -infill_speed = 70 +## MK2 family ## + +## MK2 - 0.4mm nozzle +[print:0.05mm ULTRADETAIL] +inherits = *0.05mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 +infill_extrusion_width = 0.5 + +[print:0.10mm DETAIL] +inherits = *0.10mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 +external_perimeter_speed = 40 +infill_acceleration = 2000 +infill_speed = 60 +perimeter_speed = 50 +solid_infill_speed = 50 +perimeters = 3 +bridge_acceleration = 800 + +[print:0.15mm 100mms Linear Advance] +inherits = *0.15mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 50 +infill_speed = 100 +max_print_speed = 150 +perimeter_speed = 60 +small_perimeter_speed = 30 +solid_infill_speed = 100 +support_material_speed = 60 +top_solid_infill_speed = 70 + +[print:0.15mm OPTIMAL] +inherits = *0.15mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 +top_infill_extrusion_width = 0.45 + +[print:0.20mm 100mms Linear Advance] +inherits = *0.20mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 50 +infill_speed = 100 +max_print_speed = 150 +perimeter_speed = 60 +small_perimeter_speed = 30 +solid_infill_speed = 100 +support_material_speed = 60 +top_solid_infill_speed = 70 + +[print:0.20mm NORMAL] +inherits = *0.20mm* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 + +[print:0.35mm FAST] +inherits = *0.35mm* +bridge_flow_ratio = 0.95 +bridge_speed = 30 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 +first_layer_extrusion_width = 0.42 +perimeter_extrusion_width = 0.43 +solid_infill_extrusion_width = 0.7 +top_infill_extrusion_width = 0.45 +support_material_extrusion_width = 0.37 +support_material_contact_distance = 0.1 +top_solid_infill_speed = 40 +thick_bridges = 1 + +## MMU1 specific +[print:0.15mm OPTIMAL SOLUBLE FULL] +inherits = *0.15mm*; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +external_perimeter_speed = 25 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +perimeter_speed = 40 +solid_infill_speed = 40 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 30 +bridge_flow_ratio = 0.8 +bridge_speed = 30 + +[print:0.15mm OPTIMAL SOLUBLE INTERFACE] +inherits = 0.15mm OPTIMAL SOLUBLE FULL +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% + +[print:0.20mm NORMAL SOLUBLE FULL] +inherits = *0.20mm*; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2[^\.].*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +external_perimeter_speed = 30 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +perimeter_speed = 40 +solid_infill_speed = 40 +top_solid_infill_speed = 30 +bridge_flow_ratio = 0.95 +bridge_speed = 30 + +[print:0.20mm NORMAL SOLUBLE INTERFACE] +inherits = 0.20mm NORMAL SOLUBLE FULL +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 +support_material_xy_spacing = 80% + +## MK2 - 0.25mm nozzle + +[print:0.05mm ULTRADETAIL @0.25 nozzle] +inherits = *0.05mm*; *0.25nozzle* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 +fill_density = 20% +infill_speed = 20 max_print_speed = 100 -perimeter_speed = 45 -solid_infill_speed = 70 -top_solid_infill_speed = 45 -external_perimeter_extrusion_width = 0.68 -perimeter_extrusion_width = 0.68 -infill_extrusion_width = 0.68 -solid_infill_extrusion_width = 0.68 +perimeter_speed = 20 +small_perimeter_speed = 15 +solid_infill_speed = 20 +support_material_speed = 20 +support_material_contact_distance = 0.07 -# XXXXXXXXXXXXXXXXXXXXXX -# XXX----- MK2.5 ----XXX -# XXXXXXXXXXXXXXXXXXXXXX +[print:0.10mm DETAIL @0.25 nozzle] +inherits = *0.10mm*; *0.25nozzle* +bridge_acceleration = 600 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 +external_perimeter_speed = 20 +infill_acceleration = 1000 +infill_speed = 40 +perimeter_acceleration = 600 +perimeter_speed = 25 +small_perimeter_speed = 15 +solid_infill_speed = 40 +top_solid_infill_speed = 30 +support_material_contact_distance = 0.07 -# MK2.5 # -[print:0.15mm 100mms Linear Advance @MK2.5] -inherits = 0.15mm 100mms Linear Advance -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 -single_extruder_multi_material_priming = 0 +[print:0.15mm OPTIMAL @0.25 nozzle] +inherits = *0.15mm*; *0.25nozzle* +bridge_acceleration = 600 +bridge_flow_ratio = 0.8 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 +external_perimeter_speed = 20 +infill_acceleration = 1000 +infill_speed = 40 +perimeter_acceleration = 600 +perimeter_speed = 25 +small_perimeter_speed = 15 +solid_infill_speed = 40 +top_solid_infill_speed = 30 +support_material_contact_distance = 0.08 -# MK2.5 # -[print:0.15mm OPTIMAL @MK2.5] -inherits = 0.15mm OPTIMAL -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 -single_extruder_multi_material_priming = 0 +## MK2 - 0.6mm nozzle + +[print:0.15mm OPTIMAL @0.6 nozzle] +inherits = *0.15mm*; *0.6nozzle* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 + +[print:0.20mm NORMAL @0.6 nozzle] +inherits = *0.20mm*; *0.6nozzle* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 + +[print:0.35mm FAST @0.6 nozzle] +inherits = *0.35mm*; *0.6nozzle* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 + +## MMU1 specific +[print:0.35mm FAST sol full @0.6 nozzle] +inherits = *0.35mm*; *0.6nozzle*; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 30 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +perimeter_speed = 40 +support_material_speed = 40 +support_material_interface_layers = 2 +support_material_xy_spacing = 120% +top_infill_extrusion_width = 0.6 +support_material_extrusion_width = 0.6 + +[print:0.35mm FAST sol int @0.6 nozzle] +inherits = 0.35mm FAST sol full @0.6 nozzle +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 +support_material_xy_spacing = 150% + +## MK2.5 -# MK2.5 MMU2 # [print:0.10mm DETAIL @MK2.5] inherits = 0.10mm DETAIL compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 -# MK2.5 MMU2 # +[print:0.15mm 100mms Linear Advance @MK2.5] +inherits = 0.15mm 100mms Linear Advance +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 +single_extruder_multi_material_priming = 0 + +[print:0.15mm OPTIMAL @MK2.5] +inherits = 0.15mm OPTIMAL +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 +single_extruder_multi_material_priming = 0 + +[print:0.20mm 100mms Linear Advance @MK2.5] +inherits = 0.20mm 100mms Linear Advance +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 +single_extruder_multi_material_priming = 0 + +[print:0.20mm NORMAL @MK2.5] +inherits = 0.20mm NORMAL +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 +single_extruder_multi_material_priming = 0 + +[print:0.35mm FAST @MK2.5] +inherits = 0.35mm FAST +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 +single_extruder_multi_material_priming = 0 + +## MK2.5 - MMU2 specific + [print:0.15mm OPTIMAL SOLUBLE FULL @MK2.5] inherits = 0.15mm OPTIMAL SOLUBLE FULL support_material_extruder = 5 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 -# MK2.5 MMU2 # [print:0.15mm OPTIMAL SOLUBLE INTERFACE @MK2.5] inherits = 0.15mm OPTIMAL SOLUBLE INTERFACE support_material_extruder = 0 support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 -# MK2.5 # -[print:0.20mm 100mms Linear Advance @MK2.5] -inherits = 0.20mm 100mms Linear Advance -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 -single_extruder_multi_material_priming = 0 - -# MK2.5 # -[print:0.20mm NORMAL @MK2.5] -inherits = 0.20mm NORMAL -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 -single_extruder_multi_material_priming = 0 - -# MK2.5 MMU2 # [print:0.20mm NORMAL SOLUBLE FULL @MK2.5] inherits = 0.20mm NORMAL SOLUBLE FULL support_material_extruder = 5 @@ -1094,7 +776,6 @@ support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 -# MK2.5 MMU2 # [print:0.20mm NORMAL SOLUBLE INTERFACE @MK2.5] inherits = 0.20mm NORMAL SOLUBLE INTERFACE support_material_extruder = 0 @@ -1102,14 +783,7 @@ support_material_interface_extruder = 5 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 single_extruder_multi_material_priming = 0 -# MK2.5 # -[print:0.35mm FAST @MK2.5] -inherits = 0.35mm FAST -# alias = 0.35mm FAST -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.5.*/ and nozzle_diameter[0]==0.4 -single_extruder_multi_material_priming = 0 - -# MK2.5 MMU2 0.6 nozzle # +# MK2.5 MMU2 0.6 nozzle [print:0.35mm SOLUBLE FULL @0.6 nozzle MK2.5] inherits = *0.35mm*; *0.6nozzle*; *soluble_support* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and printer_model!="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1 @@ -1132,12 +806,296 @@ support_material_interface_layers = 3 support_material_with_sheath = 0 support_material_xy_spacing = 80% -## 0.8mm nozzle print profiles +## MK3 family ## + +## MK3 - 0.4mm nozzle + +[print:0.05mm ULTRADETAIL @MK3] +inherits = *0.05mm*; *MK3* +fill_pattern = gyroid +fill_density = 15% +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material +top_infill_extrusion_width = 0.4 + +[print:0.07mm ULTRADETAIL @MK3] +inherits = *0.07mm*; *MK3* +fill_pattern = gyroid +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and ! single_extruder_multi_material +top_infill_extrusion_width = 0.4 + +[print:0.10mm DETAIL @MK3] +inherits = *0.10mm*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 25 +infill_acceleration = 1000 +bridge_acceleration = 800 +infill_speed = 80 +max_print_speed = 200 +perimeter_speed = 45 +solid_infill_speed = 80 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 40 +fill_pattern = gyroid +fill_density = 15% +perimeters = 3 + +[print:0.15mm QUALITY @MK3] +inherits = *0.15mm*; *MK3* +bridge_speed = 25 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 25 +infill_acceleration = 1000 +infill_speed = 80 +max_print_speed = 200 +perimeter_speed = 45 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +fill_pattern = gyroid +fill_density = 15% + +[print:0.15mm SPEED @MK3] +inherits = *0.15mm*; *MK3* +bridge_speed = 25 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 200 +max_print_speed = 200 +perimeter_speed = 60 +solid_infill_speed = 200 +top_solid_infill_speed = 50 + +[print:0.20mm QUALITY @MK3] +inherits = *0.20mm*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 25 +infill_acceleration = 1000 +infill_speed = 80 +max_print_speed = 200 +perimeter_speed = 45 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +fill_pattern = gyroid +fill_density = 15% + +[print:0.20mm SPEED @MK3] +inherits = *0.20mm*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 200 +max_print_speed = 200 +perimeter_speed = 60 +solid_infill_speed = 200 +top_solid_infill_speed = 50 + +[print:0.30mm DRAFT @MK3] +inherits = *0.30mm*; *MK3* +bottom_solid_layers = 3 +bridge_speed = 25 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 85 +max_print_speed = 200 +perimeter_speed = 50 +small_perimeter_speed = 30 +solid_infill_speed = 80 +top_solid_infill_speed = 40 +support_material_speed = 45 +external_perimeter_extrusion_width = 0.6 +extrusion_width = 0.5 +first_layer_extrusion_width = 0.42 +infill_extrusion_width = 0.5 +perimeter_extrusion_width = 0.5 +solid_infill_extrusion_width = 0.5 +top_infill_extrusion_width = 0.45 +support_material_extrusion_width = 0.38 +support_material_contact_distance = 0.2 + +## MK3 - MMU2 specific +[print:0.15mm SOLUBLE FULL @MK3] +inherits = 0.15mm SPEED @MK3; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +support_material_extruder = 5 +support_material_interface_extruder = 5 +perimeter_speed = 40 +solid_infill_speed = 40 +infill_speed = 80 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 30 +support_material_speed = 45 +bridge_flow_ratio = 0.8 +bridge_speed = 30 + +[print:0.15mm SOLUBLE INTERFACE @MK3] +inherits = 0.15mm SOLUBLE FULL @MK3 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 + +[print:0.20mm SOLUBLE FULL @MK3] +inherits = 0.20mm SPEED @MK3; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +support_material_extruder = 5 +support_material_interface_extruder = 5 +perimeter_speed = 40 +solid_infill_speed = 40 +infill_speed = 80 +top_infill_extrusion_width = 0.45 +top_solid_infill_speed = 30 +support_material_speed = 45 +bridge_flow_ratio = 0.95 +bridge_speed = 30 + +[print:0.20mm SOLUBLE INTERFACE @MK3] +inherits = 0.20mm SOLUBLE FULL @MK3 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 + +## MK3 - 0.25mm nozzle + +[print:0.05mm ULTRADETAIL @0.25 nozzle MK3] +inherits = *0.05mm*; *0.25nozzle*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 +fill_pattern = grid +fill_density = 20% +support_material_contact_distance = 0.07 + +[print:0.07mm ULTRADETAIL @0.25 nozzle MK3] +inherits = *0.07mm*; *0.25nozzle*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 +infill_speed = 30 +solid_infill_speed = 30 +support_material_speed = 30 +top_solid_infill_speed = 20 +fill_pattern = grid +fill_density = 20% +support_material_contact_distance = 0.07 + +[print:0.10mm DETAIL @0.25 nozzle MK3] +inherits = *0.10mm*; *0.25nozzleMK3*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 +fill_pattern = grid +fill_density = 20% +support_material_contact_distance = 0.07 + +[print:0.15mm QUALITY @0.25 nozzle MK3] +inherits = *0.15mm*; *0.25nozzleMK3*; *MK3* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 +fill_pattern = grid +fill_density = 20% +support_material_contact_distance = 0.08 + +## MK3 - 0.6mm nozzle + +[print:0.15mm DETAIL @0.6 nozzle MK3] +inherits = *0.15mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +support_material_contact_distance = 0.22 +bridge_flow_ratio = 1 + +[print:0.20mm DETAIL @0.6 nozzle MK3] +inherits = *0.20mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +support_material_contact_distance = 0.22 +bridge_flow_ratio = 1 + +[print:0.30mm QUALITY @0.6 nozzle MK3] +inherits = *0.30mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +support_material_contact_distance = 0.25 +bridge_flow_ratio = 1 + +[print:0.35mm SPEED @0.6 nozzle MK3] +inherits = *0.35mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 +infill_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 +support_material_contact_distance = 0.25 +bridge_flow_ratio = 0.95 + +[print:0.40mm DRAFT @0.6 nozzle MK3] +inherits = *0.40mm*; *0.6nozzleMK3*; *MK306* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 +external_perimeter_speed = 35 +infill_acceleration = 1000 +infill_speed = 70 +max_print_speed = 100 +perimeter_speed = 45 +solid_infill_speed = 70 +top_solid_infill_speed = 45 +external_perimeter_extrusion_width = 0.68 +perimeter_extrusion_width = 0.68 +infill_extrusion_width = 0.68 +solid_infill_extrusion_width = 0.68 +support_material_contact_distance = 0.25 +bridge_flow_ratio = 0.95 + +## MK3 - MMU2 specific + +[print:0.30mm SOLUBLE FULL @0.6 nozzle MK3] +inherits = 0.30mm QUALITY @0.6 nozzle MK3; *soluble_support* +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +support_material_extruder = 5 +support_material_interface_extruder = 5 +support_material_speed = 40 +perimeter_speed = 40 +solid_infill_speed = 40 +top_infill_extrusion_width = 0.6 +support_material_extrusion_width = 0.6 +top_solid_infill_speed = 30 +support_material_xy_spacing = 80% + +[print:0.30mm SOLUBLE INTERFACE @0.6 nozzle MK3] +inherits = 0.30mm SOLUBLE FULL @0.6 nozzle MK3 +notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder +support_material_extruder = 0 +support_material_interface_layers = 3 +support_material_with_sheath = 0 + +## 0.8mm nozzle - MK2.5 and MK3 +## Only for MMU2 Single mode at the moment [print:0.30mm DETAIL @0.8 nozzle] inherits = *common*; *0.8nozzle* layer_height = 0.30 -## Only for MMU2 Single mode at the moment compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 perimeter_speed = 35 external_perimeter_speed = 25 @@ -1151,7 +1109,6 @@ support_material_speed = 40 [print:0.40mm QUALITY @0.8 nozzle] inherits = *common*; *0.8nozzle* layer_height = 0.4 -## Only for MMU2 Single mode at the moment compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 perimeter_speed = 35 external_perimeter_speed = 25 @@ -1165,7 +1122,6 @@ support_material_speed = 40 [print:0.55mm DRAFT @0.8 nozzle] inherits = *common*; *0.8nozzle* layer_height = 0.55 -## Only for MMU2 Single mode at the moment compatible_printers_condition = printer_model=~/(MK3|MK2.5).*/ and nozzle_diameter[0]==0.8 and num_extruders==1 perimeter_speed = 30 external_perimeter_speed = 25 @@ -1179,9 +1135,9 @@ top_solid_infill_speed = 30 external_perimeter_extrusion_width = 1 perimeter_extrusion_width = 1 -## MINI print profiles +## MINI ## -# 0.4mm nozzle +# MINI - 0.4mm nozzle [print:0.05mm ULTRADETAIL @MINI] inherits = *0.05mm*; *MINI* @@ -1194,6 +1150,8 @@ perimeter_extrusion_width = 0.4 external_perimeter_extrusion_width = 0.4 support_material_xy_spacing = 60% support_material_speed = 30 +support_material_extrusion_width = 0.35 +bridge_acceleration = 300 [print:0.07mm ULTRADETAIL @MINI] inherits = *0.07mm*; *MINI* @@ -1205,10 +1163,13 @@ small_perimeter_speed = 15 perimeter_extrusion_width = 0.4 external_perimeter_extrusion_width = 0.4 support_material_xy_spacing = 60% +support_material_extrusion_width = 0.35 +bridge_acceleration = 300 [print:0.10mm DETAIL @MINI] inherits = *0.10mm*; *MINI* -bridge_speed = 30 +bridge_speed = 20 +bridge_acceleration = 700 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 external_perimeter_speed = 30 @@ -1219,12 +1180,10 @@ top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% perimeters = 3 -bridge_acceleration = 1000 support_material_xy_spacing = 60% [print:0.15mm QUALITY @MINI] inherits = *0.15mm*; *MINI* -bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 external_perimeter_speed = 30 @@ -1233,24 +1192,20 @@ solid_infill_speed = 80 top_solid_infill_speed = 40 fill_pattern = gyroid fill_density = 15% -bridge_flow_ratio = 0.85 support_material_xy_spacing = 60% [print:0.15mm SPEED @MINI] inherits = *0.15mm*; *MINI* -bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 50 external_perimeter_speed = 40 infill_speed = 140 solid_infill_speed = 140 top_solid_infill_speed = 40 -bridge_flow_ratio = 0.85 support_material_xy_spacing = 60% [print:0.20mm QUALITY @MINI] inherits = *0.20mm*; *MINI* -bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 40 external_perimeter_speed = 30 @@ -1263,7 +1218,6 @@ support_material_xy_spacing = 60% [print:0.20mm SPEED @MINI] inherits = *0.20mm*; *MINI* -bridge_speed = 30 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 perimeter_speed = 50 external_perimeter_speed = 40 @@ -1275,7 +1229,8 @@ support_material_xy_spacing = 60% [print:0.25mm DRAFT @MINI] inherits = *0.25mm*; *MINI* -bridge_speed = 30 +bridge_speed = 25 +bridge_flow_ratio = 0.95 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4 external_perimeter_speed = 40 infill_speed = 110 @@ -1288,8 +1243,9 @@ infill_extrusion_width = 0.45 solid_infill_extrusion_width = 0.45 top_infill_extrusion_width = 0.4 support_material_xy_spacing = 60% +support_material_contact_distance = 0.2 -# 0.25mm nozzle +# MINI - 0.25mm nozzle [print:0.05mm ULTRADETAIL @0.25 nozzle MINI] inherits = *0.05mm*; *0.25nozzle*; *MINI* @@ -1297,6 +1253,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and fill_pattern = grid fill_density = 20% support_material_speed = 30 +support_material_contact_distance = 0.07 [print:0.07mm ULTRADETAIL @0.25 nozzle MINI] inherits = *0.07mm*; *0.25nozzle*; *MINI* @@ -1307,20 +1264,23 @@ support_material_speed = 30 top_solid_infill_speed = 20 fill_pattern = grid fill_density = 20% +support_material_contact_distance = 0.07 [print:0.10mm DETAIL @0.25 nozzle MINI] inherits = *0.10mm*; *0.25nozzleMINI*; *MINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% +support_material_contact_distance = 0.07 [print:0.15mm QUALITY @0.25 nozzle MINI] inherits = *0.15mm*; *0.25nozzleMINI*; *MINI* compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.25 fill_pattern = grid fill_density = 20% +support_material_contact_distance = 0.08 -# 0.6mm nozzle MINI +# MINI - 0.6mm nozzle [print:0.15mm DETAIL @0.6 nozzle MINI] inherits = *0.15mm*; *0.6nozzleMINI* @@ -1333,6 +1293,8 @@ solid_infill_speed = 70 top_solid_infill_speed = 45 infill_extrusion_width = 0.65 solid_infill_extrusion_width = 0.65 +support_material_contact_distance = 0.22 +bridge_flow_ratio = 1 [print:0.20mm DETAIL @0.6 nozzle MINI] inherits = *0.20mm*; *0.6nozzleMINI* @@ -1345,6 +1307,8 @@ solid_infill_speed = 70 top_solid_infill_speed = 45 infill_extrusion_width = 0.65 solid_infill_extrusion_width = 0.65 +support_material_contact_distance = 0.22 +bridge_flow_ratio = 1 [print:0.30mm QUALITY @0.6 nozzle MINI] inherits = *0.30mm*; *0.6nozzleMINI* @@ -1357,6 +1321,8 @@ solid_infill_speed = 65 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 +support_material_contact_distance = 0.25 +bridge_flow_ratio = 1 [print:0.35mm SPEED @0.6 nozzle MINI] inherits = *0.35mm*; *0.6nozzleMINI* @@ -1369,6 +1335,8 @@ solid_infill_speed = 60 top_solid_infill_speed = 45 external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 +support_material_contact_distance = 0.25 +bridge_flow_ratio = 0.95 [print:0.40mm DRAFT @0.6 nozzle MINI] inherits = *0.40mm*; *0.6nozzleMINI* @@ -1383,8 +1351,10 @@ external_perimeter_extrusion_width = 0.68 perimeter_extrusion_width = 0.68 infill_extrusion_width = 0.68 solid_infill_extrusion_width = 0.68 +support_material_contact_distance = 0.25 +bridge_flow_ratio = 0.95 -# 0.8mm nozzle MINI +# MINI - 0.8mm nozzle [print:0.30mm DETAIL @0.8 nozzle MINI] inherits = 0.30mm DETAIL @0.8 nozzle @@ -1490,7 +1460,7 @@ max_fan_speed = 50 min_fan_speed = 30 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" temperature = 240 -filament_retract_length = 1.4 +filament_retract_length = 1 filament_retract_lift = 0.2 compatible_printers_condition = printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) @@ -1500,14 +1470,14 @@ compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2S filament_max_volumetric_speed = 15 [filament:*PETMMU1*] -inherits = *PET* +; inherits = *PET* filament_retract_length = nil filament_retract_speed = nil filament_retract_lift = 0.2 compatible_printers_condition = printer_model=="MK2SMM" [filament:*PETMINI*] -inherits = *PET* +; inherits = *PET* filament_retract_length = nil filament_retract_speed = 40 filament_deretract_speed = 25 @@ -1518,7 +1488,7 @@ compatible_printers_condition = printer_model=="MINI" start_filament_gcode = "M900 K{if nozzle_diameter[0]==0.6}0.12{elsif nozzle_diameter[0]==0.8}0.06{else}0.2{endif} ; Filament gcode" [filament:*PETMINI06*] -inherits = *PET* +; inherits = *PET* filament_retract_length = nil filament_retract_speed = 40 filament_deretract_speed = 25 @@ -1529,7 +1499,7 @@ start_filament_gcode = "M900 K0.12 ; Filament gcode" filament_max_volumetric_speed = 13 [filament:*ABSMINI*] -inherits = *ABS* +; inherits = *ABS* bed_temperature = 100 filament_retract_length = 2.7 filament_retract_speed = nil @@ -1861,8 +1831,8 @@ min_fan_speed = 20 max_fan_speed = 20 min_print_speed = 15 slowdown_below_layer_time = 15 -first_layer_temperature = 265 -temperature = 265 +first_layer_temperature = 260 +temperature = 260 filament_type = ASA [filament:Prusament ASA] @@ -2015,9 +1985,10 @@ filament_cost = 27.82 filament_density = 1.04 filament_spool_weight = 245 -[filament:Plasty Mladec ABS] +[filament:Filament PM ABS] inherits = *ABSC* -filament_vendor = Plasty Mladec +renamed_from = "Plasty Mladec ABS" +filament_vendor = Filament PM filament_cost = 27.82 filament_density = 1.08 filament_spool_weight = 230 @@ -2038,9 +2009,21 @@ filament_cost = 27.82 filament_density = 1.27 compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MK2SMM" and printer_model!="MINI" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material) -[filament:Plasty Mladec PETG] +[filament:Extrudr PETG] inherits = *PET* -filament_vendor = Plasty Mladec +filament_vendor = Extrudr +filament_cost = 35.45 +filament_density = 1.29 +temperature = 220 +bed_temperature = 70 +first_layer_temperature = 220 +first_layer_bed_temperature = 70 +slowdown_below_layer_time = 20 + +[filament:Filament PM PETG] +inherits = *PET* +renamed_from = "Plasty Mladec PETG" +filament_vendor = Filament PM filament_cost = 27.82 filament_density = 1.27 filament_spool_weight = 230 @@ -2301,9 +2284,10 @@ filament_vendor = Made for Prusa filament_cost = 27.82 filament_spool_weight = 230 -[filament:Plasty Mladec ABS @MMU2] +[filament:Filament PM ABS @MMU2] inherits = *ABS MMU2* -filament_vendor = Plasty Mladec +renamed_from = "Plasty Mladec ABS @MMU2" +filament_vendor = Filament PM filament_density = 1.08 filament_cost = 27.82 filament_spool_weight = 230 @@ -2402,9 +2386,10 @@ filament_density = 1.27 filament_spool_weight = 201 filament_type = PETG -[filament:Plasty Mladec PETG @0.6 nozzle] +[filament:Filament PM PETG @0.6 nozzle] inherits = *PET06* -filament_vendor = Plasty Mladec +renamed_from = "Plasty Mladec PETG @0.6 nozzle" +filament_vendor = Filament PM first_layer_temperature = 230 temperature = 240 filament_cost = 27.82 @@ -2458,7 +2443,7 @@ filament_unload_time = 12 filament_unloading_speed = 20 filament_unloading_speed_start = 120 filament_loading_speed_start = 19 -filament_retract_length = 1.4 +filament_retract_length = 1 filament_retract_lift = 0.2 [filament:*PET MMU2 06*] @@ -2471,9 +2456,10 @@ inherits = *PET MMU2* renamed_from = "Generic PET MMU2"; "Generic PETG MMU2" filament_vendor = Generic -[filament:Plasty Mladec PETG @MMU2] +[filament:Filament PM PETG @MMU2] inherits = *PET MMU2* -filament_vendor = Plasty Mladec +renamed_from = "Plasty Mladec PETG @MMU2" +filament_vendor = Filament PM filament_spool_weight = 230 [filament:Prusa PETG @MMU2] @@ -2510,10 +2496,11 @@ filament_cost = 36.29 filament_density = 1.27 filament_spool_weight = 201 -[filament:Plasty Mladec PETG @MMU2 0.6 nozzle] +[filament:Filament PM PETG @MMU2 0.6 nozzle] inherits = *PET MMU2 06* +renamed_from = "Plasty Mladec PETG @MMU2 0.6 nozzle" filament_type = PETG -filament_vendor = Plasty Mladec +filament_vendor = Filament PM filament_spool_weight = 230 [filament:Prusa PLA] @@ -2530,9 +2517,10 @@ filament_vendor = Fiberlogy filament_cost = 25.4 filament_density = 1.24 -[filament:Plasty Mladec PLA] +[filament:Filament PM PLA] inherits = *PLA* -filament_vendor = Plasty Mladec +renamed_from = "Plasty Mladec PLA" +filament_vendor = Filament PM filament_cost = 27.82 filament_density = 1.24 filament_spool_weight = 230 @@ -2576,6 +2564,26 @@ filament_vendor = EUMAKERS filament_cost = 25.4 filament_density = 1.24 +[filament:Extrudr PLA NX1] +inherits = *PLA* +filament_vendor = Extrudr +filament_cost = 22.76 +filament_density = 1.24 +temperature = 205 +bed_temperature = 60 +first_layer_temperature = 205 +first_layer_bed_temperature = 60 +full_fan_speed_layer = 3 +max_fan_speed = 90 +min_fan_speed = 30 +slowdown_below_layer_time = 20 + +[filament:Extrudr PLA NX2] +inherits = Extrudr PLA NX1 +filament_vendor = Extrudr +filament_cost = 23.63 +filament_density = 1.3 + [filament:Floreon3D PLA] inherits = *PLA* filament_vendor = Floreon3D @@ -2930,204 +2938,75 @@ temperature = 220 ## Filaments MMU1 [filament:ColorFabb HT @MMU1] -inherits = *PETMMU1* -filament_vendor = ColorFabb -bed_temperature = 110 -bridge_fan_speed = 30 -cooling = 1 -disable_fan_first_layers = 3 -fan_always_on = 0 -fan_below_layer_time = 10 -filament_cost = 58.66 -filament_density = 1.18 -filament_spool_weight = 236 -first_layer_bed_temperature = 105 -first_layer_temperature = 270 -max_fan_speed = 20 -min_fan_speed = 10 +inherits = ColorFabb HT; *PETMMU1* start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" -temperature = 270 [filament:ColorFabb XT @MMU1] -inherits = *PETMMU1* -filament_vendor = ColorFabb -filament_type = PETG -filament_cost = 62.90 -filament_density = 1.27 -filament_spool_weight = 236 -first_layer_bed_temperature = 90 -first_layer_temperature = 260 -temperature = 270 +inherits = ColorFabb XT; *PETMMU1* [filament:ColorFabb XT-CF20 @MMU1] -inherits = *PETMMU1* -filament_vendor = ColorFabb -compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM" -extrusion_multiplier = 1.05 -filament_cost = 80.65 -filament_density = 1.35 -filament_spool_weight = 236 -filament_colour = #804040 -filament_max_volumetric_speed = 2 -first_layer_bed_temperature = 90 -first_layer_temperature = 260 +inherits = ColorFabb XT-CF20; *PETMMU1* start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" -temperature = 260 [filament:ColorFabb nGen @MMU1] -inherits = *PETMMU1* -filament_vendor = ColorFabb -filament_cost = 21.2 -filament_density = 1.2 -filament_spool_weight = 236 -bridge_fan_speed = 40 -fan_always_on = 0 -fan_below_layer_time = 10 -filament_type = NGEN -first_layer_temperature = 240 -max_fan_speed = 35 -min_fan_speed = 20 +inherits = ColorFabb nGen; *PETMMU1* [filament:E3D Edge @MMU1] -inherits = *PETMMU1* -filament_vendor = E3D -filament_cost = 56.9 -filament_density = 1.26 -filament_type = EDGE +inherits = E3D Edge; *PETMMU1* [filament:Fillamentum CPE @MMU1] -inherits = *PETMMU1* -filament_vendor = Fillamentum -filament_cost = 56.45 -filament_density = 1.25 -filament_spool_weight = 230 -filament_type = CPE -first_layer_bed_temperature = 90 -first_layer_temperature = 275 -max_fan_speed = 50 -min_fan_speed = 50 -disable_fan_first_layers = 3 -full_fan_speed_layer = 5 -temperature = 275 +inherits = Fillamentum CPE; *PETMMU1* [filament:Generic PETG @MMU1] -inherits = *PETMMU1* +inherits = Generic PETG; *PETMMU1* renamed_from = "Generic PET MMU1"; "Generic PETG MMU1" -filament_vendor = Generic -filament_cost = 27.82 -filament_density = 1.27 [filament:Devil Design PETG @MMU1] -inherits = *PETMMU1* -filament_vendor = Devil Design -filament_cost = 20.99 -filament_density = 1.23 -filament_spool_weight = 250 -first_layer_temperature = 230 -first_layer_bed_temperature = 85 -temperature = 230 -bed_temperature = 90 +inherits = Devil Design PETG; *PETMMU1* -[filament:Plasty Mladec PETG @MMU1] -inherits = *PETMMU1* -filament_vendor = Plasty Mladec -filament_cost = 27.82 -filament_density = 1.27 -filament_spool_weight = 230 +[filament:Filament PM PETG @MMU1] +inherits = Filament PM PETG; *PETMMU1* +renamed_from = "Plasty Mladec PETG @MMU1" [filament:Verbatim PETG @MMU1] -inherits = *PETMMU1* -filament_vendor = Verbatim -filament_cost = 27.90 -filament_density = 1.27 -filament_spool_weight = 235 +inherits = Verbatim PETG; *PETMMU1* [filament:Fiberlogy PETG @MMU1] -inherits = *PETMMU1* -filament_vendor = Fiberlogy -filament_cost = 21.50 -filament_density = 1.27 +inherits = Fiberlogy PETG; *PETMMU1* [filament:Prusa PETG @MMU1] -inherits = *PETMMU1* +inherits = Prusa PETG; *PETMMU1* renamed_from = "Prusa PET MMU1"; "Prusa PETG MMU1" -filament_vendor = Made for Prusa -filament_cost = 27.82 -filament_density = 1.27 -filament_spool_weight = 230 [filament:Prusament PETG @MMU1] -inherits = *PETMMU1* -filament_vendor = Prusa Polymers -first_layer_temperature = 240 -temperature = 250 -filament_cost = 36.29 -filament_density = 1.27 -filament_spool_weight = 201 -filament_type = PETG +inherits = Prusament PETG; *PETMMU1* + +[filament:Extrudr PETG @MMU1] +inherits = Extrudr PETG; *PETMMU1* +filament_vendor = Extrudr [filament:Taulman T-Glase @MMU1] -inherits = *PETMMU1* -filament_vendor = Taulman -filament_cost = 40 -filament_density = 1.27 -bridge_fan_speed = 40 -cooling = 0 -fan_always_on = 0 -first_layer_bed_temperature = 90 -first_layer_temperature = 240 -max_fan_speed = 5 -min_fan_speed = 0 +inherits = Taulman T-Glase; *PETMMU1* start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" [filament:Fiberthree F3 PA Pure Pro @MMU1] -inherits = *common* -filament_vendor = Fiberthree -filament_cost = 200.84 -filament_density = 1.2 -bed_temperature = 70 -first_layer_bed_temperature = 75 -first_layer_temperature = 270 -temperature = 270 -bridge_fan_speed = 30 -cooling = 1 -disable_fan_first_layers = 3 -fan_always_on = 1 -fan_below_layer_time = 20 -min_print_speed = 15 -slowdown_below_layer_time = 10 -filament_colour = #DEE0E6 +inherits = Fiberthree F3 PA Pure Pro filament_max_volumetric_speed = 4 -filament_soluble = 0 -filament_type = NYLON -max_fan_speed = 20 -min_fan_speed = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +filament_retract_length = nil +filament_retract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = nil +filament_wipe = nil compatible_printers_condition = printer_model=="MK2SMM" [filament:Fiberthree F3 PA-CF Pro @MMU1] -inherits = *common* -filament_vendor = Fiberthree -filament_cost = 208.1 -filament_density = 1.25 -bed_temperature = 70 -first_layer_bed_temperature = 75 -first_layer_temperature = 275 -temperature = 275 -bridge_fan_speed = 30 -cooling = 1 -disable_fan_first_layers = 3 -fan_always_on = 0 -fan_below_layer_time = 20 -min_print_speed = 15 -slowdown_below_layer_time = 10 -filament_colour = #DEE0E6 +inherits = Fiberthree F3 PA-CF Pro filament_max_volumetric_speed = 4 -filament_soluble = 0 -filament_type = NYLON -max_fan_speed = 0 -min_fan_speed = 0 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +filament_retract_length = nil +filament_retract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = nil +filament_wipe = nil compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MK2SMM" [filament:Fiberthree F3 PA-GF Pro @MMU1] @@ -3166,108 +3045,47 @@ compatible_printers_condition = printer_model=="MK2SMM" [filament:Generic PETG @MINI] inherits = Generic PETG; *PETMINI* renamed_from = "Generic PET MINI"; "Generic PETG MINI" -filament_vendor = Generic -filament_cost = 27.82 -filament_density = 1.27 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 [filament:Devil Design PETG @MINI] -inherits = Generic PETG; *PETMINI* -filament_vendor = Devil Design -filament_cost = 20.99 -filament_density = 1.23 -filament_spool_weight = 250 -first_layer_temperature = 230 -first_layer_bed_temperature = 85 -temperature = 230 -bed_temperature = 90 +inherits = Devil Design PETG; *PETMINI* compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 -[filament:Plasty Mladec PETG @MINI] -inherits = Generic PETG; *PETMINI* -filament_vendor = Plasty Mladec -filament_cost = 27.82 -filament_density = 1.27 -filament_spool_weight = 230 +[filament:Filament PM PETG @MINI] +inherits = Filament PM PETG; *PETMINI* +renamed_from = "Plasty Mladec PETG @MINI" compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Verbatim PETG @MINI] -inherits = Generic PETG; *PETMINI* -filament_vendor = Verbatim -filament_cost = 27.90 -filament_density = 1.27 -filament_spool_weight = 235 +inherits = Verbatim PETG; *PETMINI* compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Fiberlogy PETG @MINI] -inherits = Generic PETG; *PETMINI* -filament_vendor = Fiberlogy -filament_cost = 21.50 -filament_density = 1.27 +inherits = Fiberlogy PETG; *PETMINI* compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.6 [filament:Generic ABS @MINI] inherits = Generic ABS; *ABSMINI* -filament_vendor = Generic -filament_cost = 27.82 -filament_density = 1.08 -fan_always_on = 0 -cooling = 1 -min_fan_speed = 15 -max_fan_speed = 15 -disable_fan_first_layers = 4 -fan_below_layer_time = 30 -bridge_fan_speed = 25 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 [filament:Fiberthree F3 PA Pure Pro @MINI] -inherits = *common* -filament_vendor = Fiberthree -filament_cost = 200.84 -filament_density = 1.2 -bed_temperature = 70 -first_layer_bed_temperature = 75 -first_layer_temperature = 270 -temperature = 270 -bridge_fan_speed = 30 -cooling = 1 -disable_fan_first_layers = 3 -fan_always_on = 1 -fan_below_layer_time = 20 -min_print_speed = 15 -slowdown_below_layer_time = 10 -filament_colour = #DEE0E6 +inherits = Fiberthree F3 PA Pure Pro filament_max_volumetric_speed = 4 -filament_soluble = 0 -filament_type = NYLON -max_fan_speed = 20 -min_fan_speed = 20 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +filament_retract_length = nil +filament_retract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = nil +filament_wipe = nil compatible_printers_condition = printer_model=="MINI" [filament:Fiberthree F3 PA-CF Pro @MINI] -inherits = *common* -filament_vendor = Fiberthree -filament_cost = 208.1 -filament_density = 1.25 -bed_temperature = 70 -first_layer_bed_temperature = 75 -first_layer_temperature = 275 -temperature = 275 -bridge_fan_speed = 30 -cooling = 1 -disable_fan_first_layers = 3 -fan_always_on = 0 -fan_below_layer_time = 20 -min_print_speed = 15 -slowdown_below_layer_time = 10 -filament_colour = #DEE0E6 +inherits = Fiberthree F3 PA-CF Pro filament_max_volumetric_speed = 4 -filament_soluble = 0 -filament_type = NYLON -max_fan_speed = 0 -min_fan_speed = 0 -start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" +filament_retract_length = nil +filament_retract_speed = nil +filament_retract_lift = nil +filament_retract_before_travel = nil +filament_wipe = nil compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:Fiberthree F3 PA-GF Pro @MINI] @@ -3280,14 +3098,8 @@ max_fan_speed = 15 min_fan_speed = 15 [filament:Kimya ABS Carbon @MINI] -inherits = *ABSMINI* -filament_vendor = Kimya -filament_cost = 140.4 -filament_density = 1.032 -filament_colour = #804040 +inherits = Kimya ABS Carbon; *ABSMINI* filament_max_volumetric_speed = 6 -first_layer_temperature = 260 -temperature = 260 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:Kimya ABS Kevlar @MINI] @@ -3296,146 +3108,57 @@ filament_vendor = Kimya filament_density = 1.037 [filament:Esun ABS @MINI] -inherits = Generic ABS; *ABSMINI* -filament_vendor = Esun -filament_cost = 27.82 -filament_density = 1.01 -filament_spool_weight = 265 -fan_always_on = 0 -cooling = 1 -min_fan_speed = 15 -max_fan_speed = 15 -disable_fan_first_layers = 4 -fan_below_layer_time = 30 -bridge_fan_speed = 25 +inherits = Esun ABS; *ABSMINI* [filament:Hatchbox ABS @MINI] -inherits = Generic ABS; *ABSMINI* -filament_vendor = Hatchbox -filament_cost = 27.82 -filament_density = 1.08 -filament_spool_weight = 245 -fan_always_on = 0 -cooling = 1 -min_fan_speed = 15 -max_fan_speed = 15 -disable_fan_first_layers = 4 -fan_below_layer_time = 30 -bridge_fan_speed = 25 +inherits = Hatchbox ABS; *ABSMINI* -[filament:Plasty Mladec ABS @MINI] -inherits = Generic ABS; *ABSMINI* -filament_vendor = Plasty Mladec -filament_cost = 27.82 -filament_density = 1.08 -filament_spool_weight = 230 -fan_always_on = 0 -cooling = 1 -min_fan_speed = 15 -max_fan_speed = 15 -disable_fan_first_layers = 4 -fan_below_layer_time = 30 -bridge_fan_speed = 25 +[filament:Filament PM ABS @MINI] +inherits = Filament PM ABS; *ABSMINI* +renamed_from = "Plasty Mladec ABS @MINI" [filament:Verbatim ABS @MINI] -inherits = Generic ABS; *ABSMINI* -filament_vendor = Verbatim -filament_cost = 25.87 -filament_density = 1.05 -filament_spool_weight = 235 -fan_always_on = 0 -cooling = 1 -min_fan_speed = 15 -max_fan_speed = 15 -disable_fan_first_layers = 4 -fan_below_layer_time = 30 -bridge_fan_speed = 25 +inherits = Verbatim ABS; *ABSMINI* [filament:Prusament PETG @MINI] inherits = Prusament PETG; *PETMINI* -filament_vendor = Prusa Polymers -first_layer_temperature = 240 -temperature = 250 -filament_density = 1.27 -filament_spool_weight = 201 -filament_cost = 36.29 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 +[filament:Extrudr PETG @MINI] +inherits = Extrudr PETG; *PETMINI* +filament_vendor = Extrudr + [filament:Kimya PETG Carbon @MINI] -inherits = *PETMINI* -filament_vendor = Kimya -extrusion_multiplier = 1.05 -filament_cost = 150.02 -filament_density = 1.317 -filament_colour = #804040 +inherits = Kimya PETG Carbon; *PETMINI* filament_max_volumetric_speed = 6 -first_layer_bed_temperature = 85 -first_layer_temperature = 240 -temperature = 240 filament_retract_length = nil filament_retract_lift = 0.3 compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" [filament:Prusament PETG @0.6 nozzle MINI] inherits = Prusament PETG; *PETMINI06* -first_layer_temperature = 240 -temperature = 250 -filament_density = 1.27 -filament_spool_weight = 201 -filament_cost = 36.29 [filament:Generic PETG @0.6 nozzle MINI] inherits = Generic PETG; *PETMINI06* renamed_from = "Generic PET 0.6 nozzle MINI"; "Generic PETG 0.6 nozzle MINI" -filament_cost = 27.82 -filament_density = 1.27 [filament:Devil Design PETG @0.6 nozzle MINI] -inherits = Generic PETG; *PETMINI06* -filament_vendor = Devil Design -first_layer_temperature = 230 -first_layer_bed_temperature = 85 -temperature = 230 -bed_temperature = 90 -filament_cost = 20.99 -filament_density = 1.23 -filament_spool_weight = 250 +inherits = Devil Design PETG; *PETMINI06* -[filament:Plasty Mladec PETG @0.6 nozzle MINI] -inherits = Generic PETG; *PETMINI06* -filament_vendor = Plasty Mladec -filament_cost = 27.82 -filament_density = 1.27 -filament_spool_weight = 230 +[filament:Filament PM PETG @0.6 nozzle MINI] +inherits = Filament PM PETG; *PETMINI06* +renamed_from = "Plasty Mladec PETG @0.6 nozzle MINI" [filament:Verbatim PETG @0.6 nozzle MINI] -inherits = Generic PETG; *PETMINI06* -filament_vendor = Verbatim -filament_spool_weight = 235 +inherits = Verbatim PETG; *PETMINI06* [filament:Fiberlogy PETG @0.6 nozzle MINI] -inherits = Generic PETG; *PETMINI06* -filament_vendor = Fiberlogy +inherits = Fiberlogy PETG; *PETMINI06* [filament:Prusament ASA @MINI] inherits = Prusament ASA; *ABSMINI* -first_layer_temperature = 260 first_layer_bed_temperature = 100 -temperature = 260 bed_temperature = 100 -fan_always_on = 1 -cooling = 1 -min_fan_speed = 20 -max_fan_speed = 20 -bridge_fan_speed = 30 -min_print_speed = 15 -slowdown_below_layer_time = 15 -disable_fan_first_layers = 4 -filament_type = ASA -filament_colour = #FFF2EC -filament_cost = 42.69 -filament_density = 1.07 -filament_spool_weight = 201 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 [filament:Fillamentum Flexfill 98A @MINI] @@ -3541,89 +3264,43 @@ inherits = Fillamentum CPE; *PETMINI* first_layer_temperature = 265 first_layer_bed_temperature = 90 temperature = 265 -filament_type = CPE -filament_cost = 56.45 -filament_density = 1.25 -filament_spool_weight = 230 disable_fan_first_layers = 3 full_fan_speed_layer = 5 [filament:ColorFabb nGen @MINI] inherits = ColorFabb nGen; *PETMINI* -filament_cost = 52.46 -filament_density = 1.2 -filament_spool_weight = 236 [filament:E3D PC-ABS @MINI] inherits = E3D PC-ABS; *ABSMINI* -filament_density = 1.05 -filament_cost = 28.80 +filament_retract_length = nil +filament_retract_before_travel = nil +filament_wipe = nil [filament:Fillamentum ABS @MINI] inherits = Fillamentum ABS; *ABSMINI* -filament_cost = 32.4 -filament_density = 1.04 -filament_spool_weight = 230 -fan_always_on = 0 -cooling = 1 -min_fan_speed = 15 -max_fan_speed = 15 -disable_fan_first_layers = 4 -fan_below_layer_time = 30 -bridge_fan_speed = 25 [filament:Fillamentum ASA @MINI] inherits = Fillamentum ASA; *ABSMINI* -first_layer_temperature = 255 first_layer_bed_temperature = 100 -temperature = 255 bed_temperature = 100 -fan_always_on = 1 -cooling = 1 -min_fan_speed = 20 -max_fan_speed = 20 -min_print_speed = 15 -slowdown_below_layer_time = 15 -disable_fan_first_layers = 4 -filament_type = ASA -filament_colour = #FFF2EC -filament_cost = 38.7 -filament_density = 1.07 -filament_spool_weight = 230 [filament:Polymaker PC-Max @MINI] inherits = Polymaker PC-Max; *ABSMINI* -filament_type = PC filament_max_volumetric_speed = 7 bed_temperature = 100 -filament_colour = #FFF2EC first_layer_bed_temperature = 100 first_layer_temperature = 270 temperature = 270 -bridge_fan_speed = 0 -filament_cost = 77.3 -filament_density = 1.20 +filament_retract_length = nil +filament_retract_before_travel = nil +filament_wipe = nil [filament:Prusament PC Blend @MINI] -inherits = *ABSMINI* -filament_vendor = Prusa Polymers -filament_cost = 60.49 -filament_density = 1.22 -filament_spool_weight = 201 -fan_always_on = 0 +inherits = Prusament PC Blend; *ABSMINI* first_layer_temperature = 275 first_layer_bed_temperature = 100 temperature = 275 bed_temperature = 100 -cooling = 1 -min_fan_speed = 20 -max_fan_speed = 20 -bridge_fan_speed = 30 -min_print_speed = 15 -disable_fan_first_layers = 4 -fan_below_layer_time = 30 -filament_type = PC -filament_colour = #DEE0E6 filament_max_volumetric_speed = 7 filament_retract_length = nil filament_retract_speed = nil @@ -3634,117 +3311,43 @@ filament_wipe = nil compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 [filament:Prusa ABS @MINI] -inherits = *ABSMINI* -filament_vendor = Made for Prusa -filament_cost = 27.82 -filament_density = 1.08 -filament_spool_weight = 230 -fan_always_on = 0 -cooling = 1 -min_fan_speed = 15 -max_fan_speed = 15 -disable_fan_first_layers = 4 -fan_below_layer_time = 30 -bridge_fan_speed = 25 +inherits = Prusa ABS; *ABSMINI* compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 [filament:Generic HIPS @MINI] -inherits = *ABSMINI* -filament_vendor = Generic -filament_cost = 27.3 -filament_density = 1.04 -bridge_fan_speed = 50 -cooling = 1 -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 10 -filament_colour = #FFFFD7 -filament_soluble = 1 -filament_type = HIPS -first_layer_temperature = 230 -max_fan_speed = 20 -min_fan_speed = 20 -temperature = 230 +inherits = Generic HIPS; *ABSMINI* [filament:ColorFabb HT @MINI] -inherits = *PETMINI* -filament_vendor = ColorFabb +inherits = ColorFabb HT; *PETMINI* bed_temperature = 100 -bridge_fan_speed = 30 -cooling = 1 -disable_fan_first_layers = 3 -fan_always_on = 0 -fan_below_layer_time = 10 -filament_cost = 58.66 -filament_density = 1.18 -filament_spool_weight = 236 first_layer_bed_temperature = 100 -first_layer_temperature = 270 -max_fan_speed = 20 -min_fan_speed = 10 -temperature = 270 +min_fan_speed = 15 [filament:ColorFabb XT @MINI] -inherits = *PETMINI* -filament_vendor = ColorFabb -filament_type = PETG -filament_cost = 62.90 -filament_density = 1.27 -filament_spool_weight = 236 +inherits = ColorFabb XT; *PETMINI* first_layer_bed_temperature = 90 -first_layer_temperature = 260 -temperature = 270 [filament:ColorFabb XT-CF20 @MINI] -inherits = *PETMINI* -filament_vendor = ColorFabb +inherits = ColorFabb XT-CF20; *PETMINI* compatible_printers_condition = nozzle_diameter[0]>=0.4 and printer_model=="MINI" -extrusion_multiplier = 1.05 -filament_cost = 80.65 -filament_density = 1.35 -filament_spool_weight = 236 -filament_colour = #804040 -filament_max_volumetric_speed = 2 first_layer_bed_temperature = 90 first_layer_temperature = 260 temperature = 260 [filament:Taulman T-Glase @MINI] -inherits = *PETMINI* -filament_vendor = Taulman -filament_cost = 40 -filament_density = 1.27 -bridge_fan_speed = 40 -cooling = 0 -fan_always_on = 0 -first_layer_bed_temperature = 90 -first_layer_temperature = 240 -max_fan_speed = 5 -min_fan_speed = 0 +inherits = Taulman T-Glase; *PETMINI* [filament:E3D Edge @MINI] -inherits = *PETMINI* -filament_vendor = E3D -filament_cost = 56.9 -filament_density = 1.26 -filament_type = EDGE +inherits = E3D Edge; *PETMINI* [filament:Prusa PETG @MINI] -inherits = *PETMINI* +inherits = Prusa PETG; *PETMINI* renamed_from = "Prusa PET MINI"; "Prusa PETG MINI" -filament_vendor = Made for Prusa -filament_cost = 27.82 -filament_density = 1.27 -filament_spool_weight = 230 compatible_printers_condition = printer_model=="MINI" and nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 [filament:Prusa PETG @0.6 nozzle MINI] -inherits = *PETMINI06* +inherits = Prusa PETG; *PETMINI06* renamed_from = "Prusa PET 0.6 nozzle MINI"; "Prusa PETG 0.6 nozzle MINI" -filament_vendor = Made for Prusa -filament_cost = 27.82 -filament_density = 1.27 -filament_spool_weight = 230 ## Filaments 0.8 nozzle @@ -5321,7 +4924,7 @@ retract_speed = 35 serial_port = serial_speed = 250000 single_extruder_multi_material = 0 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-2 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 @@ -5356,19 +4959,19 @@ printer_model = MK2SMM [printer:*mm-single*] inherits = *multimaterial* -end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n\n +end_gcode = G1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n\n printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100\nM92 E140\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\nG92 E0 default_print_profile = 0.15mm OPTIMAL [printer:*mm-multi*] inherits = *multimaterial* high_current_on_filament_swap = 1 -end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors +end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\n{endif}\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259 nozzle_diameter = 0.4,0.4,0.4,0.4 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\n{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_single_extruder_multi_material_priming}\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\n{endif}\nG92 E0 default_print_profile = 0.15mm OPTIMAL # XXXXXXXXXXXXXXXXX @@ -5438,21 +5041,21 @@ inherits = Original Prusa i3 MK2S printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 [printer:Original Prusa i3 MK2.5 0.25 nozzle] inherits = Original Prusa i3 MK2S 0.25 nozzle printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 [printer:Original Prusa i3 MK2.5 0.6 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 [printer:Original Prusa i3 MK2.5 0.8 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle @@ -5464,39 +5067,20 @@ min_layer_height = 0.2 retract_length = 1 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle [printer:Original Prusa i3 MK2.5 MMU2 Single] -inherits = Original Prusa i3 MK2.5; *mm2* +inherits = *25mm2* printer_model = MK2.5MMU2 single_extruder_multi_material = 0 max_print_height = 200 -remaining_times = 1 -silent_mode = 0 -retract_lift_below = 199 -machine_max_acceleration_e = 10000 -machine_max_acceleration_extruding = 2000 -machine_max_acceleration_retracting = 1500 -machine_max_acceleration_x = 9000 -machine_max_acceleration_y = 9000 -machine_max_acceleration_z = 500 -machine_max_feedrate_e = 120 -machine_max_feedrate_x = 500 -machine_max_feedrate_y = 500 -machine_max_feedrate_z = 12 -machine_max_jerk_e = 4.5 -machine_max_jerk_x = 10 -machine_max_jerk_y = 10 -machine_max_jerk_z = 0.2 -machine_min_extruding_rate = 0 -machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; load to nozzle\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n -end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; load to nozzle\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.20 F1000\nG1 X5 E4 F1000\nG92 E0\n +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors [printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle @@ -5511,87 +5095,43 @@ inherits = Original Prusa i3 MK2.5S MMU2S Single 0.25 nozzle printer_model = MK2.5MMU2 [printer:Original Prusa i3 MK2.5 MMU2] -inherits = Original Prusa i3 MK2.5; *mm2* +inherits = *25mm2* printer_model = MK2.5MMU2 max_print_height = 200 -remaining_times = 1 -silent_mode = 0 -retract_lift_below = 199 -machine_max_acceleration_e = 10000 -machine_max_acceleration_extruding = 2000 -machine_max_acceleration_retracting = 1500 -machine_max_acceleration_x = 9000 -machine_max_acceleration_y = 9000 -machine_max_acceleration_z = 500 -machine_max_feedrate_e = 120 -machine_max_feedrate_x = 500 -machine_max_feedrate_y = 500 -machine_max_feedrate_z = 12 -machine_max_jerk_e = 4.5 -machine_max_jerk_x = 10 -machine_max_jerk_y = 10 -machine_max_jerk_z = 0.2 -machine_min_extruding_rate = 0 -machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL @MK2.5 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n single_extruder_multi_material = 1 -# The 5x nozzle diameter defines the number of extruders. Other extruder parameters -# (for example the retract values) are duplicaed from the first value, so they do not need -# to be defined explicitely. nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n -end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n +end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S] inherits = Original Prusa i3 MK2.5 printer_model = MK2.5S -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.25 nozzle] inherits = Original Prusa i3 MK2.5 0.25 nozzle printer_model = MK2.5S -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.6 nozzle] inherits = Original Prusa i3 MK2.5 0.6 nozzle printer_model = MK2.5S -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 [printer:Original Prusa i3 MK2.5S 0.8 nozzle] inherits = Original Prusa i3 MK2.5 0.8 nozzle printer_model = MK2.5S [printer:Original Prusa i3 MK2.5S MMU2S Single] -inherits = Original Prusa i3 MK2.5; *mm2s* +inherits = *25mm2s* printer_model = MK2.5SMMU2S single_extruder_multi_material = 0 max_print_height = 200 -remaining_times = 1 -silent_mode = 0 -retract_lift_below = 199 -machine_max_acceleration_e = 10000 -machine_max_acceleration_extruding = 2000 -machine_max_acceleration_retracting = 1500 -machine_max_acceleration_x = 9000 -machine_max_acceleration_y = 9000 -machine_max_acceleration_z = 500 -machine_max_feedrate_e = 120 -machine_max_feedrate_x = 500 -machine_max_feedrate_y = 500 -machine_max_feedrate_z = 12 -machine_max_jerk_e = 4.5 -machine_max_jerk_x = 10 -machine_max_jerk_y = 10 -machine_max_jerk_z = 0.2 -machine_min_extruding_rate = 0 -machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n -end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors [printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single @@ -5601,7 +5141,7 @@ min_layer_height = 0.2 nozzle_diameter = 0.8 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle @@ -5623,41 +5163,19 @@ nozzle_diameter = 0.25 printer_variant = 0.25 retract_lift = 0.15 default_print_profile = 0.10mm DETAIL 0.25 nozzle -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n [printer:Original Prusa i3 MK2.5S MMU2S] -inherits = Original Prusa i3 MK2.5; *mm2s* +inherits = *25mm2s* printer_model = MK2.5SMMU2S max_print_height = 200 -remaining_times = 1 -silent_mode = 0 -retract_lift_below = 199 -machine_max_acceleration_e = 10000 -machine_max_acceleration_extruding = 2000 -machine_max_acceleration_retracting = 1500 -machine_max_acceleration_x = 9000 -machine_max_acceleration_y = 9000 -machine_max_acceleration_z = 500 -machine_max_feedrate_e = 120 -machine_max_feedrate_x = 500 -machine_max_feedrate_y = 500 -machine_max_feedrate_z = 12 -machine_max_jerk_e = 4.5 -machine_max_jerk_x = 10 -machine_max_jerk_y = 10 -machine_max_jerk_z = 0.2 -machine_min_extruding_rate = 0 -machine_min_travel_rate = 0 default_print_profile = 0.15mm OPTIMAL @MK2.5 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n single_extruder_multi_material = 1 -# The 5x nozzle diameter defines the number of extruders. Other extruder parameters -# (for example the retract values) are duplicaed from the first value, so they do not need -# to be defined explicitely. nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n -end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n +end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S @@ -5675,7 +5193,7 @@ min_layer_height = 0.15 printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle -## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment. +## 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment. ## [printer:Original Prusa i3 MK2.5S MMU2S 0.8 nozzle] ## inherits = Original Prusa i3 MK2.5S MMU2S @@ -5725,7 +5243,7 @@ remaining_times = 1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n retract_lift_below = 209 max_print_height = 210 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} printer_model = MK3 default_print_profile = 0.15mm QUALITY @MK3 @@ -5736,7 +5254,7 @@ max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E8 F700 ; intro line\nG1 X100 E12.5 F700 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3 0.6 nozzle] @@ -5745,7 +5263,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif} default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3 0.8 nozzle] @@ -5755,7 +5273,7 @@ max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S95 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle @@ -5763,13 +5281,11 @@ default_filament_profile = Prusament PLA @0.8 nozzle inherits = Original Prusa i3 MK3 renamed_from = "Original Prusa i3 MK3S" printer_model = MK3S -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} [printer:Original Prusa i3 MK3S & MK3S+ 0.25 nozzle] inherits = Original Prusa i3 MK3 0.25 nozzle renamed_from = "Original Prusa i3 MK3S 0.25 nozzle" printer_model = MK3S -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E8.0 F700.0 ; intro line\nG1 X100.0 E12.5 F700.0 ; intro line\nG92 E0.0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} [printer:Original Prusa i3 MK3S & MK3S+ 0.6 nozzle] inherits = Original Prusa i3 MK3 0.6 nozzle @@ -5804,12 +5320,32 @@ printer_model = MK3SMMU2S default_print_profile = 0.15mm QUALITY @MK3 default_filament_profile = Prusament PLA @MMU2 +[printer:*25mm2*] +inherits = Original Prusa i3 MK2.5 +single_extruder_multi_material = 1 +cooling_tube_length = 10 +cooling_tube_retraction = 30 +parking_pos_retraction = 85 +retract_length_toolchange = 3 +extra_loading_move = -13 +default_filament_profile = Prusament PLA @MMU2 + +[printer:*25mm2s*] +inherits = Original Prusa i3 MK2.5S +single_extruder_multi_material = 1 +cooling_tube_length = 20 +cooling_tube_retraction = 40 +parking_pos_retraction = 85 +retract_length_toolchange = 3 +extra_loading_move = -25 +default_filament_profile = Prusament PLA @MMU2 + [printer:Original Prusa i3 MK3 MMU2 Single] inherits = *mm2* single_extruder_multi_material = 0 default_filament_profile = Prusament PLA -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} -end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors [printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single @@ -5818,7 +5354,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2 Single 0.8 nozzle] @@ -5829,7 +5365,7 @@ max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle @@ -5841,27 +5377,24 @@ max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 E8.0 F1000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F1000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2] inherits = *mm2* -# The 5x nozzle diameter defines the number of extruders. Other extruder parameters -# (for example the retract values) are duplicaed from the first value, so they do not need -# to be defined explicitely. machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} -end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single] inherits = *mm2s* renamed_from = "Original Prusa i3 MK3S MMU2S Single" single_extruder_multi_material = 0 default_filament_profile = Prusament PLA -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} -end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle] inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single @@ -5871,7 +5404,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.8 nozzle] @@ -5882,7 +5415,7 @@ max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle @@ -5895,7 +5428,7 @@ max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nTc\n; purge line\nG1 X55.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F1400.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S] @@ -5904,8 +5437,8 @@ renamed_from = "Original Prusa i3 MK3S MMU2S" machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} -end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n ## 0.6mm nozzle MMU2/S printer profiles @@ -5916,7 +5449,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 [printer:Original Prusa i3 MK3 MMU2 0.6 nozzle] @@ -5925,7 +5458,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 ## 0.8mm nozzle MMU2/S printer profiles @@ -5938,7 +5471,7 @@ default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 ## max_layer_height = 0.6 ## min_layer_height = 0.2 ## printer_variant = 0.8 -## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM115 U3.9.3 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle ## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle] @@ -5963,10 +5496,11 @@ thumbnails = 16x16,220x124 bed_shape = 0x0,180x0,180x180,0x180 default_filament_profile = "Prusament PLA" default_print_profile = 0.15mm QUALITY @MINI -gcode_flavor = marlin +gcode_flavor = marlinfirmware machine_max_acceleration_e = 5000 machine_max_acceleration_extruding = 1250 machine_max_acceleration_retracting = 1250 +machine_max_acceleration_travel = 1250 machine_max_acceleration_x = 1250 machine_max_acceleration_y = 1250 machine_max_acceleration_z = 400 @@ -5996,7 +5530,7 @@ retract_lift_below = 179 retract_layer_change = 1 silent_mode = 0 remaining_times = 1 -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F900\nG1 X40.0 E10.0 F700\nG92 E0.0\n\nM221 S95 ; set flow +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)}{endif} F720 ; Move print head up\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} F720 ; Move print head further up\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n extruder_colour = @@ -6012,7 +5546,7 @@ default_print_profile = 0.10mm DETAIL @0.25 nozzle MINI retract_length = 3 retract_lift = 0.15 retract_before_travel = 1 -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0.0\nG1 Y-2.0 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110.0 E8.0 F600\nG1 X40.0 E10.0 F400\nG92 E0.0\n\nM221 S95 ; set flow +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F600\nG1 X40 E10 F400\nG92 E0\n\nM221 S95 ; set flow [printer:Original Prusa MINI & MINI+ 0.6 nozzle] inherits = Original Prusa MINI & MINI+