Fixed conflicts after merge with master

CMakeLists.txt

@@ -268,8 +268,6 @@ set(LIBDIR_BIN ${CMAKE_CURRENT_BINARY_DIR}/src)
 include_directories(${LIBDIR})
 # For generated header files
 include_directories(${LIBDIR_BIN}/platform)
-# For libslic3r.h
-include_directories(${LIBDIR}/clipper)
 
 if(WIN32)
     add_definitions(-D_USE_MATH_DEFINES -D_WIN32 -D_CRT_SECURE_NO_WARNINGS -D_SCL_SECURE_NO_WARNINGS)

src/clipper/CMakeLists.txt

@@ -2,8 +2,9 @@ project(clipper)
 cmake_minimum_required(VERSION 2.6)
 
 add_library(clipper STATIC
-    clipper.cpp
+# We are using ClipperLib compiled as part of the libslic3r project using Slic3r::Point as its base type.
-    clipper.hpp
+#    clipper.cpp
+#    clipper.hpp
     clipper_z.cpp
     clipper_z.hpp
 )

src/clipper/clipper.hpp

@@ -37,10 +37,12 @@
 #include <inttypes.h>
 #include <functional>
 
+#include <Eigen/Geometry> 
+
 #define CLIPPER_VERSION "6.2.6"
 
-//use_xyz: adds a Z member to IntPoint. Adds a minor cost to perfomance.
+//CLIPPERLIB_USE_XYZ: adds a Z member to IntPoint. Adds a minor cost to perfomance.
-//#define use_xyz
+//#define CLIPPERLIB_USE_XYZ
 
 //use_lines: Enables line clipping. Adds a very minor cost to performance.
 #define use_lines
@@ -57,11 +59,15 @@
 #include <functional>
 #include <queue>
 
-#ifdef use_xyz
+#ifdef CLIPPERLIB_NAMESPACE_PREFIX
-namespace ClipperLib_Z {
+  namespace CLIPPERLIB_NAMESPACE_PREFIX {
-#else /* use_xyz */
+#endif // CLIPPERLIB_NAMESPACE_PREFIX
-namespace ClipperLib {
+
-#endif /* use_xyz */
+#ifdef CLIPPERLIB_USE_XYZ
+  namespace ClipperLib_Z {
+#else
+  namespace ClipperLib {
+#endif
 
 enum ClipType { ctIntersection, ctUnion, ctDifference, ctXor };
 enum PolyType { ptSubject, ptClip };
@@ -88,29 +94,24 @@ enum PolyFillType { pftEvenOdd, pftNonZero, pftPositive, pftNegative };
   static constexpr cInt const hiRange = 0x3FFFFFFFFFFFFFFFLL;
 #endif // CLIPPERLIB_INT32
 
-struct IntPoint {
+#ifdef CLIPPERLIB_INTPOINT_TYPE
-  cInt X;
+using IntPoint = CLIPPERLIB_INTPOINT_TYPE;
-  cInt Y;
+#else // CLIPPERLIB_INTPOINT_TYPE
-#ifdef use_xyz
+using IntPoint = Eigen::Matrix<cInt, 
-  cInt Z;
+#ifdef CLIPPERLIB_USE_XYZ
-  IntPoint(cInt x = 0, cInt y = 0, cInt z = 0): X(x), Y(y), Z(z) {};
+  3
-#else
+#else // CLIPPERLIB_USE_XYZ
-  IntPoint(cInt x = 0, cInt y = 0): X(x), Y(y) {};
+  2
-#endif
+#endif // CLIPPERLIB_USE_XYZ
+  , 1, Eigen::DontAlign>;
+#endif // CLIPPERLIB_INTPOINT_TYPE
+
+using DoublePoint = Eigen::Matrix<double, 2, 1, Eigen::DontAlign>;
 
-  friend inline bool operator== (const IntPoint& a, const IntPoint& b)
-  {
-    return a.X == b.X && a.Y == b.Y;
-  }
-  friend inline bool operator!= (const IntPoint& a, const IntPoint& b)
-  {
-    return a.X != b.X  || a.Y != b.Y; 
-  }
-};
 //------------------------------------------------------------------------------
 
-typedef std::vector< IntPoint > Path;
+typedef std::vector<IntPoint> Path;
-typedef std::vector< Path > Paths;
+typedef std::vector<Path> Paths;
 
 inline Path& operator <<(Path& poly, const IntPoint& p) {poly.push_back(p); return poly;}
 inline Paths& operator <<(Paths& polys, const Path& p) {polys.push_back(p); return polys;}
@@ -119,16 +120,9 @@ std::ostream& operator <<(std::ostream &s, const IntPoint &p);
 std::ostream& operator <<(std::ostream &s, const Path &p);
 std::ostream& operator <<(std::ostream &s, const Paths &p);
 
-struct DoublePoint
-{
-  double X;
-  double Y;
-  DoublePoint(double x = 0, double y = 0) : X(x), Y(y) {}
-  DoublePoint(IntPoint ip) : X((double)ip.X), Y((double)ip.Y) {}
-};
 //------------------------------------------------------------------------------
 
-#ifdef use_xyz
+#ifdef CLIPPERLIB_USE_XYZ
 typedef std::function<void(const IntPoint& e1bot, const IntPoint& e1top, const IntPoint& e2bot, const IntPoint& e2top, IntPoint& pt)> ZFillCallback;
 #endif
 
@@ -269,11 +263,11 @@ enum EdgeSide { esLeft = 1, esRight = 2};
   };
 
   // Point of an output polygon.
-  // 36B on 64bit system without use_xyz.
+  // 36B on 64bit system without CLIPPERLIB_USE_XYZ.
   struct OutPt {
     // 4B
     int       Idx;
-    // 16B without use_xyz / 24B with use_xyz
+    // 16B without CLIPPERLIB_USE_XYZ / 24B with CLIPPERLIB_USE_XYZ
     IntPoint  Pt;
     // 4B on 32bit system, 8B on 64bit system
     OutPt    *Next;
@@ -368,7 +362,7 @@ public:
   bool StrictlySimple() const {return m_StrictSimple;};
   void StrictlySimple(bool value) {m_StrictSimple = value;};
   //set the callback function for z value filling on intersections (otherwise Z is 0)
-#ifdef use_xyz
+#ifdef CLIPPERLIB_USE_XYZ
   void ZFillFunction(ZFillCallback zFillFunc) { m_ZFill = zFillFunc; }
 #endif
 protected:
@@ -401,7 +395,7 @@ private:
   // Does the result go to a PolyTree or Paths?
   bool                  m_UsingPolyTree; 
   bool                  m_StrictSimple;
-#ifdef use_xyz
+#ifdef CLIPPERLIB_USE_XYZ
   ZFillCallback         m_ZFill; //custom callback 
 #endif
   void SetWindingCount(TEdge& edge) const;
@@ -454,7 +448,7 @@ private:
   void DoSimplePolygons();
   void FixupFirstLefts1(OutRec* OldOutRec, OutRec* NewOutRec) const;
   void FixupFirstLefts2(OutRec* OldOutRec, OutRec* NewOutRec) const;
-#ifdef use_xyz
+#ifdef CLIPPERLIB_USE_XYZ
   void SetZ(IntPoint& pt, TEdge& e1, TEdge& e2);
 #endif
 };
@@ -506,6 +500,8 @@ class clipperException : public std::exception
 
 } //ClipperLib namespace
 
+#ifdef CLIPPERLIB_NAMESPACE_PREFIX
+} // namespace CLIPPERLIB_NAMESPACE_PREFIX
+#endif // CLIPPERLIB_NAMESPACE_PREFIX
+
 #endif //clipper_hpp
-
-

src/clipper/clipper_z.cpp

@@ -1,7 +1,7 @@
 // Hackish wrapper around the ClipperLib library to compile the Clipper library with the Z support.
 
 // Enable the Z coordinate support.
-#define use_xyz
+#define CLIPPERLIB_USE_XYZ
 
 // and let it compile
 #include "clipper.cpp"

src/clipper/clipper_z.hpp

@@ -2,17 +2,17 @@
 
 #ifndef clipper_z_hpp
 #ifdef clipper_hpp
-#error "You should include the clipper_z.hpp first"
+#error "You should include clipper_z.hpp before clipper.hpp"
 #endif
 
 #define clipper_z_hpp
 
 // Enable the Z coordinate support.
-#define use_xyz
+#define CLIPPERLIB_USE_XYZ
 
 #include "clipper.hpp"
 
 #undef clipper_hpp
-#undef use_xyz
+#undef CLIPPERLIB_USE_XYZ
 
 #endif // clipper_z_hpp

src/libnest2d/CMakeLists.txt

@@ -12,11 +12,8 @@ set(LIBNEST2D_SRCFILES
     include/libnest2d/placers/bottomleftplacer.hpp
     include/libnest2d/placers/nfpplacer.hpp
     include/libnest2d/selections/selection_boilerplate.hpp
-    #include/libnest2d/selections/filler.hpp
     include/libnest2d/selections/firstfit.hpp
-    #include/libnest2d/selections/djd_heuristic.hpp
+    include/libnest2d/backends/libslic3r/geometries.hpp
-    include/libnest2d/backends/clipper/geometries.hpp
-    include/libnest2d/backends/clipper/clipper_polygon.hpp
     include/libnest2d/optimizers/nlopt/nlopt_boilerplate.hpp
     include/libnest2d/optimizers/nlopt/simplex.hpp
     include/libnest2d/optimizers/nlopt/subplex.hpp
@@ -27,5 +24,5 @@ set(LIBNEST2D_SRCFILES
 add_library(libnest2d STATIC ${LIBNEST2D_SRCFILES})
 
 target_include_directories(libnest2d PUBLIC ${CMAKE_CURRENT_LIST_DIR}/include)
-target_link_libraries(libnest2d PUBLIC clipper NLopt::nlopt TBB::tbb Boost::boost)
+target_link_libraries(libnest2d PUBLIC NLopt::nlopt TBB::tbb Boost::boost libslic3r)
-target_compile_definitions(libnest2d PUBLIC LIBNEST2D_THREADING_tbb LIBNEST2D_STATIC LIBNEST2D_OPTIMIZER_nlopt LIBNEST2D_GEOMETRIES_clipper)
+target_compile_definitions(libnest2d PUBLIC LIBNEST2D_THREADING_tbb LIBNEST2D_STATIC LIBNEST2D_OPTIMIZER_nlopt LIBNEST2D_GEOMETRIES_libslic3r)

src/libnest2d/include/libnest2d/backends/clipper/clipper_polygon.hpp

@@ -1,72 +0,0 @@
-#ifndef CLIPPER_POLYGON_HPP
-#define CLIPPER_POLYGON_HPP
-
-#include <clipper.hpp>
-
-namespace ClipperLib {
-
-struct Polygon {
-    Path Contour;
-    Paths Holes;
-
-    inline Polygon() = default;
-
-    inline explicit Polygon(const Path& cont): Contour(cont) {}
-//    inline explicit Polygon(const Paths& holes):
-//        Holes(holes) {}
-    inline Polygon(const Path& cont, const Paths& holes):
-        Contour(cont), Holes(holes) {}
-
-    inline explicit Polygon(Path&& cont): Contour(std::move(cont)) {}
-//    inline explicit Polygon(Paths&& holes): Holes(std::move(holes)) {}
-    inline Polygon(Path&& cont, Paths&& holes):
-        Contour(std::move(cont)), Holes(std::move(holes)) {}
-};
-
-inline IntPoint& operator +=(IntPoint& p, const IntPoint& pa ) {
-    // This could be done with SIMD
-    p.X += pa.X;
-    p.Y += pa.Y;
-    return p;
-}
-
-inline IntPoint operator+(const IntPoint& p1, const IntPoint& p2) {
-    IntPoint ret = p1;
-    ret += p2;
-    return ret;
-}
-
-inline IntPoint& operator -=(IntPoint& p, const IntPoint& pa ) {
-    p.X -= pa.X;
-    p.Y -= pa.Y;
-    return p;
-}
-
-inline IntPoint operator -(const IntPoint& p ) {
-    IntPoint ret = p;
-    ret.X = -ret.X;
-    ret.Y = -ret.Y;
-    return ret;
-}
-
-inline IntPoint operator-(const IntPoint& p1, const IntPoint& p2) {
-    IntPoint ret = p1;
-    ret -= p2;
-    return ret;
-}
-
-inline IntPoint& operator *=(IntPoint& p, const IntPoint& pa ) {
-    p.X *= pa.X;
-    p.Y *= pa.Y;
-    return p;
-}
-
-inline IntPoint operator*(const IntPoint& p1, const IntPoint& p2) {
-    IntPoint ret = p1;
-    ret *= p2;
-    return ret;
-}
-
-}
-
-#endif // CLIPPER_POLYGON_HPP

src/libnest2d/include/libnest2d/backends/clipper/geometries.hpp

@@ -1,356 +0,0 @@
-#ifndef CLIPPER_BACKEND_HPP
-#define CLIPPER_BACKEND_HPP
-
-#include <sstream>
-#include <unordered_map>
-#include <cassert>
-#include <vector>
-#include <iostream>
-
-#include <libnest2d/geometry_traits.hpp>
-#include <libnest2d/geometry_traits_nfp.hpp>
-
-#include "clipper_polygon.hpp"
-
-namespace libnest2d {
-
-// Aliases for convinience
-using PointImpl = ClipperLib::IntPoint;
-using PathImpl  = ClipperLib::Path;
-using HoleStore = ClipperLib::Paths;
-using PolygonImpl = ClipperLib::Polygon;
-
-template<> struct ShapeTag<PolygonImpl> { using Type = PolygonTag; };
-template<> struct ShapeTag<PathImpl>    { using Type = PathTag; };
-template<> struct ShapeTag<PointImpl>   { using Type = PointTag; };
-
-// Type of coordinate units used by Clipper. Enough to specialize for point,
-// the rest of the types will work (Path, Polygon)
-template<> struct CoordType<PointImpl> { 
-    using Type = ClipperLib::cInt;
-    static const constexpr ClipperLib::cInt MM_IN_COORDS = 1000000;  
-};
-
-// Enough to specialize for path, it will work for multishape and Polygon
-template<> struct PointType<PathImpl> { using Type = PointImpl; };
-
-// This is crucial. CountourType refers to itself by default, so we don't have
-// to secialize for clipper Path. ContourType<PathImpl>::Type is PathImpl.
-template<> struct ContourType<PolygonImpl> { using Type = PathImpl; };
-
-// The holes are contained in Clipper::Paths
-template<> struct HolesContainer<PolygonImpl> { using Type = ClipperLib::Paths; };
-
-namespace pointlike {
-
-// Tell libnest2d how to extract the X coord from a ClipperPoint object
-template<> inline ClipperLib::cInt x(const PointImpl& p)
-{
-    return p.X;
-}
-
-// Tell libnest2d how to extract the Y coord from a ClipperPoint object
-template<> inline ClipperLib::cInt y(const PointImpl& p)
-{
-    return p.Y;
-}
-
-// Tell libnest2d how to extract the X coord from a ClipperPoint object
-template<> inline ClipperLib::cInt& x(PointImpl& p)
-{
-    return p.X;
-}
-
-// Tell libnest2d how to extract the Y coord from a ClipperPoint object
-template<> inline ClipperLib::cInt& y(PointImpl& p)
-{
-    return p.Y;
-}
-
-}
-
-// Using the libnest2d default area implementation
-#define DISABLE_BOOST_AREA
-
-namespace shapelike {
-
-template<>
-inline void offset(PolygonImpl& sh, TCoord<PointImpl> distance, const PolygonTag&)
-{
-    #define DISABLE_BOOST_OFFSET
-
-    using ClipperLib::ClipperOffset;
-    using ClipperLib::jtSquare;
-    using ClipperLib::etClosedPolygon;
-    using ClipperLib::Paths;
-
-    Paths result;
-    
-    try {
-        ClipperOffset offs;
-        offs.AddPath(sh.Contour, jtSquare, etClosedPolygon);
-        offs.AddPaths(sh.Holes, jtSquare, etClosedPolygon);
-        offs.Execute(result, static_cast<double>(distance));
-    } catch (ClipperLib::clipperException &) {
-        throw GeometryException(GeomErr::OFFSET);
-    }
-
-    // Offsetting reverts the orientation and also removes the last vertex
-    // so boost will not have a closed polygon.
-
-    // we plan to replace contours
-    sh.Holes.clear();
-
-    bool found_the_contour = false;
-    for(auto& r : result) {
-        if(ClipperLib::Orientation(r)) {
-            // We don't like if the offsetting generates more than one contour
-            // but throwing would be an overkill. Instead, we should warn the
-            // caller about the inability to create correct geometries
-            if(!found_the_contour) {
-                sh.Contour = std::move(r);
-                ClipperLib::ReversePath(sh.Contour);
-                auto front_p = sh.Contour.front();
-                sh.Contour.emplace_back(std::move(front_p));
-                found_the_contour = true;
-            } else {
-                dout() << "Warning: offsetting result is invalid!";
-                /* TODO warning */
-            }
-        } else {
-            // TODO If there are multiple contours we can't be sure which hole
-            // belongs to the first contour. (But in this case the situation is
-            // bad enough to let it go...)
-            sh.Holes.emplace_back(std::move(r));
-            ClipperLib::ReversePath(sh.Holes.back());
-            auto front_p = sh.Holes.back().front();
-            sh.Holes.back().emplace_back(std::move(front_p));
-        }
-    }
-}
-
-template<>
-inline void offset(PathImpl& sh, TCoord<PointImpl> distance, const PathTag&)
-{
-    PolygonImpl p(std::move(sh));
-    offset(p, distance, PolygonTag());
-    sh = p.Contour;
-}
-
-// Tell libnest2d how to make string out of a ClipperPolygon object
-template<> inline std::string toString(const PolygonImpl& sh)
-{
-    std::stringstream ss;
-
-    ss << "Contour {\n";
-    for(auto p : sh.Contour) {
-        ss << "\t" << p.X << " " << p.Y << "\n";
-    }
-    ss << "}\n";
-
-    for(auto& h : sh.Holes) {
-        ss << "Holes {\n";
-        for(auto p : h)  {
-            ss << "\t{\n";
-            ss << "\t\t" << p.X << " " << p.Y << "\n";
-            ss << "\t}\n";
-        }
-        ss << "}\n";
-    }
-
-    return ss.str();
-}
-
-template<>
-inline PolygonImpl create(const PathImpl& path, const HoleStore& holes)
-{
-    PolygonImpl p;
-    p.Contour = path;
-    p.Holes = holes;
-   
-    return p;
-}
-
-template<> inline PolygonImpl create( PathImpl&& path, HoleStore&& holes) {
-    PolygonImpl p;
-    p.Contour.swap(path);
-    p.Holes.swap(holes);
-    
-    return p;
-}
-
-template<>
-inline const THolesContainer<PolygonImpl>& holes(const PolygonImpl& sh)
-{
-    return sh.Holes;
-}
-
-template<> inline THolesContainer<PolygonImpl>& holes(PolygonImpl& sh)
-{
-    return sh.Holes;
-}
-
-template<>
-inline TContour<PolygonImpl>& hole(PolygonImpl& sh, unsigned long idx)
-{
-    return sh.Holes[idx];
-}
-
-template<>
-inline const TContour<PolygonImpl>& hole(const PolygonImpl& sh,
-                                            unsigned long idx)
-{
-    return sh.Holes[idx];
-}
-
-template<> inline size_t holeCount(const PolygonImpl& sh)
-{
-    return sh.Holes.size();
-}
-
-template<> inline PathImpl& contour(PolygonImpl& sh)
-{
-    return sh.Contour;
-}
-
-template<>
-inline const PathImpl& contour(const PolygonImpl& sh)
-{
-    return sh.Contour;
-}
-
-#define DISABLE_BOOST_TRANSLATE
-template<>
-inline void translate(PolygonImpl& sh, const PointImpl& offs)
-{
-    for(auto& p : sh.Contour) { p += offs; }
-    for(auto& hole : sh.Holes) for(auto& p : hole) { p += offs; }
-}
-
-#define DISABLE_BOOST_ROTATE
-template<>
-inline void rotate(PolygonImpl& sh, const Radians& rads)
-{
-    using Coord = TCoord<PointImpl>;
-
-    auto cosa = rads.cos();
-    auto sina = rads.sin();
-
-    for(auto& p : sh.Contour) {
-        p = {
-                static_cast<Coord>(p.X * cosa - p.Y * sina),
-                static_cast<Coord>(p.X * sina + p.Y * cosa)
-            };
-    }
-    for(auto& hole : sh.Holes) for(auto& p : hole) {
-        p = {
-                static_cast<Coord>(p.X * cosa - p.Y * sina),
-                static_cast<Coord>(p.X * sina + p.Y * cosa)
-            };
-    }
-}
-
-} // namespace shapelike
-
-#define DISABLE_BOOST_NFP_MERGE
-inline TMultiShape<PolygonImpl> clipper_execute(
-        ClipperLib::Clipper& clipper,
-        ClipperLib::ClipType clipType,
-        ClipperLib::PolyFillType subjFillType = ClipperLib::pftEvenOdd,
-        ClipperLib::PolyFillType clipFillType = ClipperLib::pftEvenOdd)
-{
-    TMultiShape<PolygonImpl> retv;
-
-    ClipperLib::PolyTree result;
-    clipper.Execute(clipType, result, subjFillType, clipFillType);
-
-    retv.reserve(static_cast<size_t>(result.Total()));
-
-    std::function<void(ClipperLib::PolyNode*, PolygonImpl&)> processHole;
-
-    auto processPoly = [&retv, &processHole](ClipperLib::PolyNode *pptr) {
-        PolygonImpl poly;
-        poly.Contour.swap(pptr->Contour);
-
-        assert(!pptr->IsHole());
-        
-        if(!poly.Contour.empty() ) {
-            auto front_p = poly.Contour.front();
-            auto &back_p  = poly.Contour.back();
-            if(front_p.X != back_p.X || front_p.Y != back_p.X) 
-                poly.Contour.emplace_back(front_p);
-        }
-
-        for(auto h : pptr->Childs) { processHole(h, poly); }
-        retv.push_back(poly);
-    };
-
-    processHole = [&processPoly](ClipperLib::PolyNode *pptr, PolygonImpl& poly)
-    {
-        poly.Holes.emplace_back(std::move(pptr->Contour));
-
-        assert(pptr->IsHole());
-        
-        if(!poly.Contour.empty() ) {
-            auto front_p = poly.Contour.front();
-            auto &back_p  = poly.Contour.back();
-            if(front_p.X != back_p.X || front_p.Y != back_p.X) 
-                poly.Contour.emplace_back(front_p);
-        }
-
-        for(auto c : pptr->Childs) processPoly(c);
-    };
-
-    auto traverse = [&processPoly] (ClipperLib::PolyNode *node)
-    {
-        for(auto ch : node->Childs) processPoly(ch);
-    };
-
-    traverse(&result);
-
-    return retv;
-}
-
-namespace nfp {
-
-template<> inline TMultiShape<PolygonImpl>
-merge(const TMultiShape<PolygonImpl>& shapes)
-{
-    ClipperLib::Clipper clipper(ClipperLib::ioReverseSolution);
-
-    bool closed = true;
-    bool valid = true;
-
-    for(auto& path : shapes) {
-        valid &= clipper.AddPath(path.Contour, ClipperLib::ptSubject, closed);
-
-        for(auto& h : path.Holes)
-            valid &= clipper.AddPath(h, ClipperLib::ptSubject, closed);
-    }
-
-    if(!valid) throw GeometryException(GeomErr::MERGE);
-
-    return clipper_execute(clipper, ClipperLib::ctUnion, ClipperLib::pftNegative);
-}
-
-}
-
-}
-
-#define DISABLE_BOOST_CONVEX_HULL
-
-//#define DISABLE_BOOST_SERIALIZE
-//#define DISABLE_BOOST_UNSERIALIZE
-
-#ifdef _MSC_VER
-#pragma warning(push)
-#pragma warning(disable: 4244)
-#pragma warning(disable: 4267)
-#endif
-// All other operators and algorithms are implemented with boost
-#include <libnest2d/utils/boost_alg.hpp>
-#ifdef _MSC_VER
-#pragma warning(pop)
-#endif
-
-#endif // CLIPPER_BACKEND_HPP

src/libnest2d/include/libnest2d/backends/libslic3r/geometries.hpp

@@ -0,0 +1,283 @@
+#ifndef CLIPPER_BACKEND_HPP
+#define CLIPPER_BACKEND_HPP
+
+#include <sstream>
+#include <unordered_map>
+#include <cassert>
+#include <vector>
+#include <iostream>
+
+#include <libnest2d/geometry_traits.hpp>
+#include <libnest2d/geometry_traits_nfp.hpp>
+
+#include <libslic3r/ExPolygon.hpp>
+#include <libslic3r/ClipperUtils.hpp>
+
+namespace Slic3r {
+
+template<class T, class En = void> struct IsVec_ : public std::false_type {};
+
+template<class T> struct IsVec_< Vec<2, T> >: public std::true_type {};
+
+template<class T>
+static constexpr const bool IsVec = IsVec_<libnest2d::remove_cvref_t<T>>::value;
+
+template<class T, class O> using VecOnly = std::enable_if_t<IsVec<T>, O>;
+
+inline Point operator+(const Point& p1, const Point& p2) {
+    Point ret = p1;
+    ret += p2;
+    return ret;
+}
+
+inline Point operator -(const Point& p ) {
+    Point ret = p;
+    ret.x() = -ret.x();
+    ret.y() = -ret.y();
+    return ret;
+}
+
+inline Point operator-(const Point& p1, const Point& p2) {
+    Point ret = p1;
+    ret -= p2;
+    return ret;
+}
+
+inline Point& operator *=(Point& p, const Point& pa ) {
+    p.x() *= pa.x();
+    p.y() *= pa.y();
+    return p;
+}
+
+inline Point operator*(const Point& p1, const Point& p2) {
+    Point ret = p1;
+    ret *= p2;
+    return ret;
+}
+
+} // namespace Slic3r
+
+namespace libnest2d {
+
+template<class T> using Vec = Slic3r::Vec<2, T>;
+
+// Aliases for convinience
+using PointImpl = Slic3r::Point;
+using PathImpl  = Slic3r::Polygon;
+using HoleStore = Slic3r::Polygons;
+using PolygonImpl = Slic3r::ExPolygon;
+
+template<> struct ShapeTag<Slic3r::Vec2crd> { using Type = PointTag; };
+template<> struct ShapeTag<Slic3r::Point>   { using Type = PointTag; };
+
+template<> struct ShapeTag<std::vector<Slic3r::Vec2crd>> { using Type = PathTag; };
+template<> struct ShapeTag<Slic3r::Polygon> { using Type = PathTag; };
+template<> struct ShapeTag<Slic3r::Points>  { using Type = PathTag; };
+template<> struct ShapeTag<Slic3r::ExPolygon> { using Type = PolygonTag; };
+template<> struct ShapeTag<Slic3r::ExPolygons> { using Type = MultiPolygonTag; };
+
+// Type of coordinate units used by Clipper. Enough to specialize for point,
+// the rest of the types will work (Path, Polygon)
+template<> struct CoordType<Slic3r::Point> {
+    using Type = coord_t;
+    static const constexpr coord_t MM_IN_COORDS = 1000000;
+};
+
+template<> struct CoordType<Slic3r::Vec2crd> {
+    using Type = coord_t;
+    static const constexpr coord_t MM_IN_COORDS = 1000000;
+};
+
+// Enough to specialize for path, it will work for multishape and Polygon
+template<> struct PointType<std::vector<Slic3r::Vec2crd>> { using Type = Slic3r::Vec2crd; };
+template<> struct PointType<Slic3r::Polygon> { using Type = Slic3r::Point; };
+template<> struct PointType<Slic3r::Points> { using Type = Slic3r::Point; };
+
+// This is crucial. CountourType refers to itself by default, so we don't have
+// to secialize for clipper Path. ContourType<PathImpl>::Type is PathImpl.
+template<> struct ContourType<Slic3r::ExPolygon> { using Type = Slic3r::Polygon; };
+
+// The holes are contained in Clipper::Paths
+template<> struct HolesContainer<Slic3r::ExPolygon> { using Type = Slic3r::Polygons; };
+
+template<>
+struct OrientationType<Slic3r::Polygon> {
+    static const constexpr Orientation Value = Orientation::COUNTER_CLOCKWISE;
+};
+
+template<>
+struct OrientationType<Slic3r::Points> {
+    static const constexpr Orientation Value = Orientation::COUNTER_CLOCKWISE;
+};
+
+template<>
+struct ClosureType<Slic3r::Polygon> {
+    static const constexpr Closure Value = Closure::OPEN;
+};
+
+template<>
+struct ClosureType<Slic3r::Points> {
+    static const constexpr Closure Value = Closure::OPEN;
+};
+
+template<> struct MultiShape<Slic3r::ExPolygon> { using Type = Slic3r::ExPolygons; };
+template<> struct ContourType<Slic3r::ExPolygons> { using Type = Slic3r::Polygon; };
+
+// Using the libnest2d default area implementation
+#define DISABLE_BOOST_AREA
+
+namespace shapelike {
+
+template<>
+inline void offset(Slic3r::ExPolygon& sh, coord_t distance, const PolygonTag&)
+{
+#define DISABLE_BOOST_OFFSET
+    auto res = Slic3r::offset_ex(sh, distance, Slic3r::ClipperLib::jtSquare);
+    if (!res.empty()) sh = res.front();
+}
+
+template<>
+inline void offset(Slic3r::Polygon& sh, coord_t distance, const PathTag&)
+{
+    auto res = Slic3r::offset(sh, distance, Slic3r::ClipperLib::jtSquare);
+    if (!res.empty()) sh = res.front();
+}
+
+// Tell libnest2d how to make string out of a ClipperPolygon object
+template<> inline std::string toString(const Slic3r::ExPolygon& sh)
+{
+    std::stringstream ss;
+
+    ss << "Contour {\n";
+    for(auto &p : sh.contour.points) {
+        ss << "\t" << p.x() << " " << p.y() << "\n";
+    }
+    ss << "}\n";
+
+    for(auto& h : sh.holes) {
+        ss << "Holes {\n";
+        for(auto p : h.points)  {
+            ss << "\t{\n";
+            ss << "\t\t" << p.x() << " " << p.y() << "\n";
+            ss << "\t}\n";
+        }
+        ss << "}\n";
+    }
+
+    return ss.str();
+}
+
+template<>
+inline Slic3r::ExPolygon create(const Slic3r::Polygon& path, const Slic3r::Polygons& holes)
+{
+    Slic3r::ExPolygon p;
+    p.contour = path;
+    p.holes = holes;
+
+    return p;
+}
+
+template<> inline Slic3r::ExPolygon create(Slic3r::Polygon&& path, Slic3r::Polygons&& holes) {
+    Slic3r::ExPolygon p;
+    p.contour.points.swap(path.points);
+    p.holes.swap(holes);
+
+    return p;
+}
+
+template<>
+inline const THolesContainer<PolygonImpl>& holes(const Slic3r::ExPolygon& sh)
+{
+    return sh.holes;
+}
+
+template<> inline THolesContainer<PolygonImpl>& holes(Slic3r::ExPolygon& sh)
+{
+    return sh.holes;
+}
+
+template<>
+inline Slic3r::Polygon& hole(Slic3r::ExPolygon& sh, unsigned long idx)
+{
+    return sh.holes[idx];
+}
+
+template<>
+inline const Slic3r::Polygon& hole(const Slic3r::ExPolygon& sh, unsigned long idx)
+{
+    return sh.holes[idx];
+}
+
+template<> inline size_t holeCount(const Slic3r::ExPolygon& sh)
+{
+    return sh.holes.size();
+}
+
+template<> inline Slic3r::Polygon& contour(Slic3r::ExPolygon& sh)
+{
+    return sh.contour;
+}
+
+template<>
+inline const Slic3r::Polygon& contour(const Slic3r::ExPolygon& sh)
+{
+    return sh.contour;
+}
+
+template<>
+inline void reserve(Slic3r::Polygon& p, size_t vertex_capacity, const PathTag&)
+{
+    p.points.reserve(vertex_capacity);
+}
+
+template<>
+inline void addVertex(Slic3r::Polygon& sh, const PathTag&, const Slic3r::Point &p)
+{
+    sh.points.emplace_back(p);
+}
+
+#define DISABLE_BOOST_TRANSLATE
+template<>
+inline void translate(Slic3r::ExPolygon& sh, const Slic3r::Point& offs)
+{
+    sh.translate(offs);
+}
+
+#define DISABLE_BOOST_ROTATE
+template<>
+inline void rotate(Slic3r::ExPolygon& sh, const Radians& rads)
+{
+    sh.rotate(rads);
+}
+
+} // namespace shapelike
+
+namespace nfp {
+
+#define DISABLE_BOOST_NFP_MERGE
+template<>
+inline TMultiShape<PolygonImpl> merge(const TMultiShape<PolygonImpl>& shapes)
+{
+    return Slic3r::union_ex(shapes);
+}
+
+} // namespace nfp
+} // namespace libnest2d
+
+#define DISABLE_BOOST_CONVEX_HULL
+
+//#define DISABLE_BOOST_SERIALIZE
+//#define DISABLE_BOOST_UNSERIALIZE
+
+#ifdef _MSC_VER
+#pragma warning(push)
+#pragma warning(disable: 4244)
+#pragma warning(disable: 4267)
+#endif
+// All other operators and algorithms are implemented with boost
+#include <libnest2d/utils/boost_alg.hpp>
+#ifdef _MSC_VER
+#pragma warning(pop)
+#endif
+
+#endif // CLIPPER_BACKEND_HPP

src/libnest2d/include/libnest2d/geometry_traits.hpp

@@ -128,22 +128,32 @@ template<class S> struct ContourType<DefaultMultiShape<S>> {
     using Type = typename ContourType<S>::Type;
 };
 
-enum class Orientation {
+enum class Orientation { CLOCKWISE, COUNTER_CLOCKWISE };
-    CLOCKWISE,
-    COUNTER_CLOCKWISE
-};
 
 template<class S>
 struct OrientationType {
 
     // Default Polygon orientation that the library expects
-    static const Orientation Value = Orientation::CLOCKWISE;
+    static const constexpr Orientation Value = Orientation::CLOCKWISE;
 };
 
-template<class T> inline /*constexpr*/ bool is_clockwise() { 
+template<class T> inline constexpr bool is_clockwise() {
     return OrientationType<TContour<T>>::Value == Orientation::CLOCKWISE; 
 }
 
+template<class T>
+inline const constexpr Orientation OrientationTypeV =
+    OrientationType<TContour<T>>::Value;
+
+enum class Closure { OPEN, CLOSED };
+
+template<class S> struct ClosureType {
+    static const constexpr Closure Value = Closure::CLOSED;
+};
+
+template<class T>
+inline const constexpr Closure ClosureTypeV =
+    ClosureType<TContour<T>>::Value;
 
 /**
  * \brief A point pair base class for other point pairs (segment, box, ...).
@@ -587,9 +597,9 @@ inline void reserve(RawPath& p, size_t vertex_capacity, const PathTag&)
 }
 
 template<class S, class...Args>
-inline void addVertex(S& sh, const PathTag&, Args...args)
+inline void addVertex(S& sh, const PathTag&, const TPoint<S> &p)
 {
-    sh.emplace_back(std::forward<Args>(args)...);
+    sh.emplace_back(p);
 }
 
 template<class S, class Fn>
@@ -841,9 +851,9 @@ template<class P> auto rbegin(P& p) -> decltype(_backward(end(p)))
     return _backward(end(p));
 }
 
-template<class P> auto rcbegin(const P& p) -> decltype(_backward(end(p)))
+template<class P> auto rcbegin(const P& p) -> decltype(_backward(cend(p)))
 {
-    return _backward(end(p));
+    return _backward(cend(p));
 }
 
 template<class P> auto rend(P& p) -> decltype(_backward(begin(p)))
@@ -873,16 +883,16 @@ inline void reserve(T& sh, size_t vertex_capacity) {
     reserve(sh, vertex_capacity, Tag<T>());
 }
 
-template<class S, class...Args>
+template<class S>
-inline void addVertex(S& sh, const PolygonTag&, Args...args)
+inline void addVertex(S& sh, const PolygonTag&, const TPoint<S> &p)
 {
-    addVertex(contour(sh), PathTag(), std::forward<Args>(args)...);
+    addVertex(contour(sh), PathTag(), p);
 }
 
-template<class S, class...Args> // Tag dispatcher
+template<class S> // Tag dispatcher
-inline void addVertex(S& sh, Args...args)
+inline void addVertex(S& sh, const TPoint<S> &p)
 {
-    addVertex(sh, Tag<S>(), std::forward<Args>(args)...);
+    addVertex(sh, Tag<S>(), p);
 }
 
 template<class S>

src/libnest2d/include/libnest2d/geometry_traits_nfp.hpp

@@ -28,7 +28,7 @@ inline void buildPolygon(const EdgeList& edgelist,
 
     auto& rsh = sl::contour(rpoly);
 
-    sl::reserve(rsh, 2*edgelist.size());
+    sl::reserve(rsh, 2 * edgelist.size());
 
     // Add the two vertices from the first edge into the final polygon.
     sl::addVertex(rsh, edgelist.front().first());
@@ -57,7 +57,6 @@ inline void buildPolygon(const EdgeList& edgelist,
 
         tmp = std::next(tmp);
     }
-
 }
 
 template<class Container, class Iterator = typename Container::iterator>
@@ -214,17 +213,24 @@ inline NfpResult<RawShape> nfpConvexOnly(const RawShape& sh,
     // Reserve the needed memory
     edgelist.reserve(cap);
     sl::reserve(rsh, static_cast<unsigned long>(cap));
+    auto add_edge = [&edgelist](const Vertex &v1, const Vertex &v2) {
+        Edge e{v1, v2};
+        if (e.sqlength() > 0)
+            edgelist.emplace_back(e);
+    };
 
     { // place all edges from sh into edgelist
         auto first = sl::cbegin(sh);
         auto next = std::next(first);
 
         while(next != sl::cend(sh)) {
-            if (pl::magnsq(*next - *first) > 0)
+            add_edge(*(first), *(next));
-                edgelist.emplace_back(*(first), *(next));
 
             ++first; ++next;
         }
+
+        if constexpr (ClosureTypeV<RawShape> == Closure::OPEN)
+            add_edge(*sl::rcbegin(sh), *sl::cbegin(sh));
     }
 
     { // place all edges from other into edgelist
@@ -232,17 +238,19 @@ inline NfpResult<RawShape> nfpConvexOnly(const RawShape& sh,
         auto next = std::next(first);
 
         while(next != sl::cend(other)) {
-            if (pl::magnsq(*next - *first) > 0)
+            add_edge(*(next), *(first));
-                edgelist.emplace_back(*(next), *(first));
 
             ++first; ++next;
         }
+
+        if constexpr (ClosureTypeV<RawShape> == Closure::OPEN)
+            add_edge(*sl::cbegin(other), *sl::rcbegin(other));
     }
    
     std::sort(edgelist.begin(), edgelist.end(),
               [](const Edge& e1, const Edge& e2)
     {
-        Vertex ax(1, 0); // Unit vector for the X axis
+        const Vertex ax(1, 0); // Unit vector for the X axis
         
         // get cectors from the edges
         Vertex p1 = e1.second() - e1.first();
@@ -289,11 +297,17 @@ inline NfpResult<RawShape> nfpConvexOnly(const RawShape& sh,
             auto pcos1 = Ratio(lcos[0]) / lsq1 * sign * lcos[0];
             auto pcos2 = Ratio(lcos[1]) / lsq2 * sign * lcos[1];
 
-            return q[0] < 2 ? pcos1 < pcos2 : pcos1 > pcos2;
+            if constexpr (is_clockwise<RawShape>())
+                return q[0] < 2 ? pcos1 < pcos2 : pcos1 > pcos2;
+            else
+                return q[0] < 2 ? pcos1 > pcos2 : pcos1 < pcos2;
         }
         
         // If in different quadrants, compare the quadrant indices only.
-        return q[0] > q[1];
+        if constexpr (is_clockwise<RawShape>())
+            return q[0] > q[1];
+        else
+            return q[0] < q[1];
     });
 
     __nfp::buildPolygon(edgelist, rsh, top_nfp);

src/libnest2d/include/libnest2d/libnest2d.hpp

@@ -7,6 +7,10 @@
 #include <libnest2d/backends/clipper/geometries.hpp>
 #endif
 
+#ifdef LIBNEST2D_GEOMETRIES_libslic3r
+#include <libnest2d/backends/libslic3r/geometries.hpp>
+#endif
+
 #ifdef LIBNEST2D_OPTIMIZER_nlopt
 // We include the stock optimizers for local and global optimization
 #include <libnest2d/optimizers/nlopt/subplex.hpp>     // Local subplex for NfpPlacer

src/libnest2d/include/libnest2d/nester.hpp

@@ -96,7 +96,7 @@ public:
      * @return The orientation type identifier for the _Item type.
      */
     static BP2D_CONSTEXPR Orientation orientation() {
-        return OrientationType<RawShape>::Value;
+        return OrientationType<TContour<RawShape>>::Value;
     }
 
     /**
@@ -446,44 +446,32 @@ private:
     }
 };
 
+template<class Sh> Sh create_rect(TCoord<Sh> width, TCoord<Sh> height)
+{
+    auto sh = sl::create<Sh>(
+        {{0, 0}, {0, height}, {width, height}, {width, 0}});
+
+    if constexpr (ClosureTypeV<Sh> == Closure::CLOSED)
+        sl::addVertex(sh, {0, 0});
+
+    if constexpr (OrientationTypeV<Sh> == Orientation::COUNTER_CLOCKWISE)
+        std::reverse(sl::begin(sh), sl::end(sh));
+
+    return sh;
+}
+
 /**
  * \brief Subclass of _Item for regular rectangle items.
  */
-template<class RawShape>
+template<class Sh>
-class _Rectangle: public _Item<RawShape> {
+class _Rectangle: public _Item<Sh> {
-    using _Item<RawShape>::vertex;
+    using _Item<Sh>::vertex;
     using TO = Orientation;
 public:
 
-    using Unit = TCoord<TPoint<RawShape>>;
+    using Unit = TCoord<Sh>;
 
-    template<TO o = OrientationType<RawShape>::Value>
+    inline _Rectangle(Unit w, Unit h): _Item<Sh>{create_rect<Sh>(w, h)} {}
-    inline _Rectangle(Unit width, Unit height,
-                      // disable this ctor if o != CLOCKWISE
-                      enable_if_t< o == TO::CLOCKWISE, int> = 0 ):
-        _Item<RawShape>( sl::create<RawShape>( {
-                                                        {0, 0},
-                                                        {0, height},
-                                                        {width, height},
-                                                        {width, 0},
-                                                        {0, 0}
-                                                      } ))
-    {
-    }
-
-    template<TO o = OrientationType<RawShape>::Value>
-    inline _Rectangle(Unit width, Unit height,
-                      // disable this ctor if o != COUNTER_CLOCKWISE
-                      enable_if_t< o == TO::COUNTER_CLOCKWISE, int> = 0 ):
-        _Item<RawShape>( sl::create<RawShape>( {
-                                                        {0, 0},
-                                                        {width, 0},
-                                                        {width, height},
-                                                        {0, height},
-                                                        {0, 0}
-                                                      } ))
-    {
-    }
 
     inline Unit width() const BP2D_NOEXCEPT {
         return getX(vertex(2));

src/libnest2d/include/libnest2d/placers/bottomleftplacer.hpp

@@ -365,44 +365,50 @@ protected:
         // the additional vertices for maintaning min object distance
         sl::reserve(rsh, finish-start+4);
 
-        /*auto addOthers = [&rsh, finish, start, &item](){
+        auto addOthers_ = [&rsh, finish, start, &item](){
             for(size_t i = start+1; i < finish; i++)
                 sl::addVertex(rsh, item.vertex(i));
-        };*/
+        };
 
-        auto reverseAddOthers = [&rsh, finish, start, &item](){
+        auto reverseAddOthers_ = [&rsh, finish, start, &item](){
             for(auto i = finish-1; i > start; i--)
-                sl::addVertex(rsh, item.vertex(
+                sl::addVertex(rsh, item.vertex(static_cast<unsigned long>(i)));
-                                         static_cast<unsigned long>(i)));
+        };
+
+        auto addOthers = [&addOthers_, &reverseAddOthers_]() {
+            if constexpr (!is_clockwise<RawShape>())
+                addOthers_();
+            else
+                reverseAddOthers_();
         };
 
         // Final polygon construction...
 
-        static_assert(OrientationType<RawShape>::Value ==
-                      Orientation::CLOCKWISE,
-                      "Counter clockwise toWallPoly() Unimplemented!");
-
         // Clockwise polygon construction
 
         sl::addVertex(rsh, topleft_vertex);
 
-        if(dir == Dir::LEFT) reverseAddOthers();
+        if(dir == Dir::LEFT) addOthers();
         else {
-            sl::addVertex(rsh, getX(topleft_vertex), 0);
+            sl::addVertex(rsh, {getX(topleft_vertex), 0});
-            sl::addVertex(rsh, getX(bottomleft_vertex), 0);
+            sl::addVertex(rsh, {getX(bottomleft_vertex), 0});
         }
 
         sl::addVertex(rsh, bottomleft_vertex);
 
         if(dir == Dir::LEFT) {
-            sl::addVertex(rsh, 0, getY(bottomleft_vertex));
+            sl::addVertex(rsh, {0, getY(bottomleft_vertex)});
-            sl::addVertex(rsh, 0, getY(topleft_vertex));
+            sl::addVertex(rsh, {0, getY(topleft_vertex)});
         }
-        else reverseAddOthers();
+        else addOthers();
 
 
         // Close the polygon
-        sl::addVertex(rsh, topleft_vertex);
+        if constexpr (ClosureTypeV<RawShape> == Closure::CLOSED)
+            sl::addVertex(rsh, topleft_vertex);
+
+        if constexpr (!is_clockwise<RawShape>())
+            std::reverse(rsh.begin(), rsh.end());
 
         return ret;
     }

src/libnest2d/include/libnest2d/placers/nfpplacer.hpp

@@ -250,8 +250,8 @@ template<class RawShape> class EdgeCache {
         Vertex ret = edge.first();
 
         // Get the point on the edge which lies in ed distance from the start
-        ret += { static_cast<Coord>(std::round(ed*std::cos(angle))),
+        ret += Vertex(static_cast<Coord>(std::round(ed*std::cos(angle))),
-                 static_cast<Coord>(std::round(ed*std::sin(angle))) };
+                      static_cast<Coord>(std::round(ed*std::sin(angle))));
 
         return ret;
     }
@@ -724,8 +724,7 @@ private:
                 auto rawobjfunc = [_objfunc, iv, startpos]
                         (Vertex v, Item& itm)
                 {
-                    auto d = v - iv;
+                    auto d = (v - iv) + startpos;
-                    d += startpos;
                     itm.translation(d);
                     return _objfunc(itm);
                 };
@@ -742,8 +741,7 @@ private:
                         &item, &bin, &iv, &startpos] (const Optimum& o)
                 {
                     auto v = getNfpPoint(o);
-                    auto d = v - iv;
+                    auto d = (v - iv) + startpos;
-                    d += startpos;
                     item.translation(d);
 
                     merged_pile.emplace_back(item.transformedShape());
@@ -877,8 +875,7 @@ private:
                 }
 
                 if( best_score < global_score ) {
-                    auto d = getNfpPoint(optimum) - iv;
+                    auto d = (getNfpPoint(optimum) - iv) + startpos;
-                    d += startpos;
                     final_tr = d;
                     final_rot = initial_rot + rot;
                     can_pack = true;

src/libnest2d/include/libnest2d/utils/boost_alg.hpp

@@ -19,7 +19,7 @@
 #pragma warning(pop)
 #endif
 // this should be removed to not confuse the compiler
-// #include <libnest2d.h>
+// #include "../libnest2d.hpp"
 
 namespace bp2d {
 
@@ -30,6 +30,10 @@ using libnest2d::PolygonImpl;
 using libnest2d::PathImpl;
 using libnest2d::Orientation;
 using libnest2d::OrientationType;
+using libnest2d::OrientationTypeV;
+using libnest2d::ClosureType;
+using libnest2d::Closure;
+using libnest2d::ClosureTypeV;
 using libnest2d::getX;
 using libnest2d::getY;
 using libnest2d::setX;
@@ -213,8 +217,15 @@ struct ToBoostOrienation<bp2d::Orientation::COUNTER_CLOCKWISE> {
     static const order_selector Value = counterclockwise;
 };
 
-static const bp2d::Orientation RealOrientation =
+template<bp2d::Closure> struct ToBoostClosure {};
-        bp2d::OrientationType<bp2d::PolygonImpl>::Value;
+
+template<> struct ToBoostClosure<bp2d::Closure::OPEN> {
+    static const constexpr closure_selector Value = closure_selector::open;
+};
+
+template<> struct ToBoostClosure<bp2d::Closure::CLOSED> {
+    static const constexpr closure_selector Value = closure_selector::closed;
+};
 
 // Ring implementation /////////////////////////////////////////////////////////
 
@@ -225,12 +236,13 @@ template<> struct tag<bp2d::PathImpl> {
 
 template<> struct point_order<bp2d::PathImpl> {
     static const order_selector value =
-            ToBoostOrienation<RealOrientation>::Value;
+        ToBoostOrienation<bp2d::OrientationTypeV<bp2d::PathImpl>>::Value;
 };
 
 // All our Paths should be closed for the bin packing application
 template<> struct closure<bp2d::PathImpl> {
-    static const closure_selector value = closed;
+    static const constexpr closure_selector value =
+        ToBoostClosure< bp2d::ClosureTypeV<bp2d::PathImpl> >::Value;
 };
 
 // Polygon implementation //////////////////////////////////////////////////////

src/libslic3r/Arrange.cpp

@@ -3,7 +3,7 @@
 
 #include "BoundingBox.hpp"
 
-#include <libnest2d/backends/clipper/geometries.hpp>
+#include <libnest2d/backends/libslic3r/geometries.hpp>
 #include <libnest2d/optimizers/nlopt/subplex.hpp>
 #include <libnest2d/placers/nfpplacer.hpp>
 #include <libnest2d/selections/firstfit.hpp>
@@ -54,23 +54,22 @@ namespace Slic3r {
 
 template<class Tout = double, class = FloatingOnly<Tout>, int...EigenArgs>
 inline constexpr Eigen::Matrix<Tout, 2, EigenArgs...> unscaled(
-    const ClipperLib::IntPoint &v) noexcept
+    const Slic3r::ClipperLib::IntPoint &v) noexcept
 {
-    return Eigen::Matrix<Tout, 2, EigenArgs...>{unscaled<Tout>(v.X),
+    return Eigen::Matrix<Tout, 2, EigenArgs...>{unscaled<Tout>(v.x()),
-                                                unscaled<Tout>(v.Y)};
+                                                unscaled<Tout>(v.y())};
 }
 
 namespace arrangement {
 
 using namespace libnest2d;
-namespace clppr = ClipperLib;
 
 // Get the libnest2d types for clipper backend
-using Item         = _Item<clppr::Polygon>;
+using Item         = _Item<ExPolygon>;
-using Box          = _Box<clppr::IntPoint>;
+using Box          = _Box<Point>;
-using Circle       = _Circle<clppr::IntPoint>;
+using Circle       = _Circle<Point>;
-using Segment      = _Segment<clppr::IntPoint>;
+using Segment      = _Segment<Point>;
-using MultiPolygon = TMultiShape<clppr::Polygon>;
+using MultiPolygon = ExPolygons;
 
 // Summon the spatial indexing facilities from boost
 namespace bgi = boost::geometry::index;
@@ -127,8 +126,8 @@ template<class TBin>
 class AutoArranger {
 public:
     // Useful type shortcuts...
-    using Placer = typename placers::_NofitPolyPlacer<clppr::Polygon, TBin>;
+    using Placer = typename placers::_NofitPolyPlacer<ExPolygon, TBin>;
-    using Selector = selections::_FirstFitSelection<clppr::Polygon>;
+    using Selector = selections::_FirstFitSelection<ExPolygon>;
     using Packer   = _Nester<Placer, Selector>;
     using PConfig  = typename Packer::PlacementConfig;
     using Distance = TCoord<PointImpl>;
@@ -168,7 +167,7 @@ protected:
     // as it possibly can be but at the same time, it has to provide
     // reasonable results.
     std::tuple<double /*score*/, Box /*farthest point from bin center*/>
-    objfunc(const Item &item, const clppr::IntPoint &bincenter)
+    objfunc(const Item &item, const Point &bincenter)
     {
         const double bin_area = m_bin_area;
         const SpatIndex& spatindex = m_rtree;
@@ -220,12 +219,12 @@ protected:
         
         switch (compute_case) {
         case BIG_ITEM: {
-            const clppr::IntPoint& minc = ibb.minCorner(); // bottom left corner
+            const Point& minc = ibb.minCorner(); // bottom left corner
-            const clppr::IntPoint& maxc = ibb.maxCorner(); // top right corner
+            const Point& maxc = ibb.maxCorner(); // top right corner
 
             // top left and bottom right corners
-            clppr::IntPoint top_left{getX(minc), getY(maxc)};
+            Point top_left{getX(minc), getY(maxc)};
-            clppr::IntPoint bottom_right{getX(maxc), getY(minc)};
+            Point bottom_right{getX(maxc), getY(minc)};
 
             // Now the distance of the gravity center will be calculated to the
             // five anchor points and the smallest will be chosen.
@@ -452,7 +451,7 @@ template<> std::function<double(const Item&)> AutoArranger<Circle>::get_objfn()
 // Specialization for a generalized polygon.
 // Warning: this is unfinished business. It may or may not work.
 template<>
-std::function<double(const Item &)> AutoArranger<clppr::Polygon>::get_objfn()
+std::function<double(const Item &)> AutoArranger<ExPolygon>::get_objfn()
 {
     auto bincenter = sl::boundingBox(m_bin).center();
     return [this, bincenter](const Item &item) {
@@ -521,7 +520,7 @@ void _arrange(
 
 inline Box to_nestbin(const BoundingBox &bb) { return Box{{bb.min(X), bb.min(Y)}, {bb.max(X), bb.max(Y)}};}
 inline Circle to_nestbin(const CircleBed &c) { return Circle({c.center()(0), c.center()(1)}, c.radius()); }
-inline clppr::Polygon to_nestbin(const Polygon &p) { return sl::create<clppr::Polygon>(Slic3rMultiPoint_to_ClipperPath(p)); }
+inline ExPolygon to_nestbin(const Polygon &p) { return ExPolygon{p}; }
 inline Box to_nestbin(const InfiniteBed &bed) { return Box::infinite({bed.center.x(), bed.center.y()}); }
 
 inline coord_t width(const BoundingBox& box) { return box.max.x() - box.min.x(); }
@@ -568,19 +567,12 @@ static void process_arrangeable(const ArrangePolygon &arrpoly,
     const Vec2crd &offs     = arrpoly.translation;
     double         rotation = arrpoly.rotation;
 
-    if (p.is_counter_clockwise()) p.reverse();
-
-    clppr::Polygon clpath(Slic3rMultiPoint_to_ClipperPath(p));
-
     // This fixes:
     // https://github.com/prusa3d/PrusaSlicer/issues/2209
-    if (clpath.Contour.size() < 3)
+    if (p.points.size() < 3)
         return;
 
-    auto firstp = clpath.Contour.front();
+    outp.emplace_back(std::move(p));
-    clpath.Contour.emplace_back(firstp);
-
-    outp.emplace_back(std::move(clpath));
     outp.back().rotation(rotation);
     outp.back().translation({offs.x(), offs.y()});
     outp.back().binId(arrpoly.bed_idx);
@@ -624,7 +616,7 @@ void arrange(ArrangePolygons &      arrangables,
              const BedT &           bed,
              const ArrangeParams &  params)
 {
-    namespace clppr = ClipperLib;
+    namespace clppr = Slic3r::ClipperLib;
     
     std::vector<Item> items, fixeditems;
     items.reserve(arrangables.size());
@@ -643,8 +635,8 @@ void arrange(ArrangePolygons &      arrangables,
     _arrange(items, fixeditems, to_nestbin(bed), params, pri, cfn);
     
     for(size_t i = 0; i < items.size(); ++i) {
-        clppr::IntPoint tr = items[i].translation();
+        Point tr = items[i].translation();
-        arrangables[i].translation = {coord_t(tr.X), coord_t(tr.Y)};
+        arrangables[i].translation = {coord_t(tr.x()), coord_t(tr.y())};
         arrangables[i].rotation    = items[i].rotation();
         arrangables[i].bed_idx     = items[i].binId();
     }

src/libslic3r/Brim.cpp

@@ -78,7 +78,7 @@ static ConstPrintObjectPtrs get_top_level_objects_with_brim(const Print &print)
     // Assign the maximum Z from four points. This values is valid index of the island
     clipper.ZFillFunction([](const ClipperLib_Z::IntPoint &e1bot, const ClipperLib_Z::IntPoint &e1top, const ClipperLib_Z::IntPoint &e2bot,
                              const ClipperLib_Z::IntPoint &e2top, ClipperLib_Z::IntPoint &pt) {
-        pt.Z = std::max(std::max(e1bot.Z, e1top.Z), std::max(e2bot.Z, e2top.Z));
+        pt.z() = std::max(std::max(e1bot.z(), e1top.z()), std::max(e2bot.z(), e2top.z()));
     });
     // Add islands
     clipper.AddPaths(islands_clip, ClipperLib_Z::ptSubject, true);
@@ -90,9 +90,9 @@ static ConstPrintObjectPtrs get_top_level_objects_with_brim(const Print &print)
     ConstPrintObjectPtrs       top_level_objects_with_brim;
     for (int i = 0; i < islands_polytree.ChildCount(); ++i) {
         for (const ClipperLib_Z::IntPoint &point : islands_polytree.Childs[i]->Contour) {
-            if (point.Z != 0 && processed_objects_idx.find(island_to_object[point.Z - 1]->id().id) == processed_objects_idx.end()) {
+            if (point.z() != 0 && processed_objects_idx.find(island_to_object[point.z() - 1]->id().id) == processed_objects_idx.end()) {
-                top_level_objects_with_brim.emplace_back(island_to_object[point.Z - 1]);
+                top_level_objects_with_brim.emplace_back(island_to_object[point.z() - 1]);
-                processed_objects_idx.insert(island_to_object[point.Z - 1]->id().id);
+                processed_objects_idx.insert(island_to_object[point.z() - 1]->id().id);
             }
         }
     }
@@ -456,7 +456,7 @@ ExtrusionEntityCollection make_brim(const Print &print, PrintTryCancel try_cance
 			clipper.ZFillFunction([](const ClipperLib_Z::IntPoint& e1bot, const ClipperLib_Z::IntPoint& e1top, const ClipperLib_Z::IntPoint& e2bot, const ClipperLib_Z::IntPoint& e2top, ClipperLib_Z::IntPoint& pt) {
 				// Assign a valid input loop identifier. Such an identifier is strictly positive, the next line is safe even in case one side of a segment
 				// hat the Z coordinate not set to the contour coordinate.
-				pt.Z = std::max(std::max(e1bot.Z, e1top.Z), std::max(e2bot.Z, e2top.Z));
+				pt.z() = std::max(std::max(e1bot.z(), e1top.z()), std::max(e2bot.z(), e2top.z()));
 			});
 			// add polygons
 			clipper.AddPaths(input_clip, ClipperLib_Z::ptSubject, false);
@@ -474,8 +474,8 @@ ExtrusionEntityCollection make_brim(const Print &print, PrintTryCancel try_cance
 			for (const ClipperLib_Z::Path &path : loops_trimmed) {
 				size_t input_idx = 0;
 				for (const ClipperLib_Z::IntPoint &pt : path)
-					if (pt.Z > 0) {
+					if (pt.z() > 0) {
-						input_idx = (size_t)pt.Z;
+						input_idx = (size_t)pt.z();
 						break;
 					}
 				assert(input_idx != 0);
@@ -492,14 +492,14 @@ ExtrusionEntityCollection make_brim(const Print &print, PrintTryCancel try_cance
 				size_t j = i + 1;
                 for (; j < loops_trimmed_order.size() && loops_trimmed_order[i].second == loops_trimmed_order[j].second; ++ j) ;
                 const ClipperLib_Z::Path &first_path = *loops_trimmed_order[i].first;
-				if (i + 1 == j && first_path.size() > 3 && first_path.front().X == first_path.back().X && first_path.front().Y == first_path.back().Y) {
+				if (i + 1 == j && first_path.size() > 3 && first_path.front().x() == first_path.back().x() && first_path.front().y() == first_path.back().y()) {
 					auto *loop = new ExtrusionLoop();
                     brim.entities.emplace_back(loop);
 					loop->paths.emplace_back(erSkirt, float(flow.mm3_per_mm()), float(flow.width()), float(print.skirt_first_layer_height()));
 		            Points &points = loop->paths.front().polyline.points;
 		            points.reserve(first_path.size());
 		            for (const ClipperLib_Z::IntPoint &pt : first_path)
-		            	points.emplace_back(coord_t(pt.X), coord_t(pt.Y));
+		            	points.emplace_back(coord_t(pt.x()), coord_t(pt.y()));
 		            i = j;
 				} else {
 			    	//FIXME The path chaining here may not be optimal.
@@ -511,7 +511,7 @@ ExtrusionEntityCollection make_brim(const Print &print, PrintTryCancel try_cance
 			            Points &points = static_cast<ExtrusionPath*>(this_loop_trimmed.entities.back())->polyline.points;
 			            points.reserve(path.size());
 			            for (const ClipperLib_Z::IntPoint &pt : path)
-			            	points.emplace_back(coord_t(pt.X), coord_t(pt.Y));
+			            	points.emplace_back(coord_t(pt.x()), coord_t(pt.y()));
 		           	}
 		           	chain_and_reorder_extrusion_entities(this_loop_trimmed.entities, &last_pt);
                     brim.entities.reserve(brim.entities.size() + this_loop_trimmed.entities.size());

src/libslic3r/CMakeLists.txt

@@ -23,6 +23,8 @@ add_library(libslic3r STATIC
     BridgeDetector.hpp
     Brim.cpp
     Brim.hpp
+    clipper.cpp
+    clipper.hpp
     ClipperUtils.cpp
     ClipperUtils.hpp
     Config.cpp

src/libslic3r/ClipperUtils.cpp

@@ -131,7 +131,7 @@ Slic3r::Polygon ClipperPath_to_Slic3rPolygon(const ClipperLib::Path &input)
 {
     Polygon retval;
     for (ClipperLib::Path::const_iterator pit = input.begin(); pit != input.end(); ++pit)
-        retval.points.emplace_back(pit->X, pit->Y);
+        retval.points.emplace_back(pit->x(), pit->y());
     return retval;
 }
 
@@ -139,7 +139,7 @@ Slic3r::Polyline ClipperPath_to_Slic3rPolyline(const ClipperLib::Path &input)
 {
     Polyline retval;
     for (ClipperLib::Path::const_iterator pit = input.begin(); pit != input.end(); ++pit)
-        retval.points.emplace_back(pit->X, pit->Y);
+        retval.points.emplace_back(pit->x(), pit->y());
     return retval;
 }
 
@@ -752,7 +752,7 @@ ClipperLib::PolyNodes order_nodes(const ClipperLib::PolyNodes &nodes)
     
     for (const ClipperLib::PolyNode *node : nodes)
         ordering_points.emplace_back(
-            Point(node->Contour.front().X, node->Contour.front().Y));
+            Point(node->Contour.front().x(), node->Contour.front().y()));
 
     // perform the ordering
     ClipperLib::PolyNodes ordered_nodes =
@@ -777,7 +777,7 @@ static void traverse_pt_outside_in(const ClipperLib::PolyNodes &nodes, Polygons
     Points ordering_points;
     ordering_points.reserve(nodes.size());
     for (const ClipperLib::PolyNode *node : nodes)
-        ordering_points.emplace_back(node->Contour.front().X, node->Contour.front().Y);
+        ordering_points.emplace_back(node->Contour.front().x(), node->Contour.front().y());
 
     // Perform the ordering, push results recursively.
     //FIXME pass the last point to chain_clipper_polynodes?

src/libslic3r/ClipperUtils.hpp

@@ -8,9 +8,9 @@
 #include "Surface.hpp"
 
 // import these wherever we're included
-using ClipperLib::jtMiter;
+using Slic3r::ClipperLib::jtMiter;
-using ClipperLib::jtRound;
+using Slic3r::ClipperLib::jtRound;
-using ClipperLib::jtSquare;
+using Slic3r::ClipperLib::jtSquare;
 
 #define CLIPPERUTILS_UNSAFE_OFFSET
 

src/libslic3r/Config.cpp

@@ -471,8 +471,8 @@ bool ConfigBase::set_deserialize_nothrow(const t_config_option_key &opt_key_src,
 {
     t_config_option_key opt_key = opt_key_src;
     std::string         value   = value_src;
-    // Both opt_key and value may be modified by _handle_legacy().
+    // Both opt_key and value may be modified by handle_legacy().
-    // If the opt_key is no more valid in this version of Slic3r, opt_key is cleared by _handle_legacy().
+    // If the opt_key is no more valid in this version of Slic3r, opt_key is cleared by handle_legacy().
     this->handle_legacy(opt_key, value);
     if (opt_key.empty())
         // Ignore the option.

src/libslic3r/Config.hpp

@@ -18,11 +18,53 @@
 
 #include <boost/algorithm/string/trim.hpp>
 #include <boost/format/format_fwd.hpp>
+#include <boost/functional/hash.hpp>
 #include <boost/property_tree/ptree_fwd.hpp>
 
 #include <cereal/access.hpp>
 #include <cereal/types/base_class.hpp>
 
+namespace Slic3r {
+    struct FloatOrPercent
+    {
+        double  value;
+        bool    percent;
+
+    private:
+        friend class cereal::access;
+        template<class Archive> void serialize(Archive& ar) { ar(this->value); ar(this->percent); }
+    };
+
+    inline bool operator==(const FloatOrPercent& l, const FloatOrPercent& r) throw() { return l.value == r.value && l.percent == r.percent; }
+    inline bool operator!=(const FloatOrPercent& l, const FloatOrPercent& r) throw() { return !(l == r); }
+}
+
+namespace std {
+    template<> struct hash<Slic3r::FloatOrPercent> {
+        std::size_t operator()(const Slic3r::FloatOrPercent& v) const noexcept {
+            std::size_t seed = std::hash<double>{}(v.value);
+            return v.percent ? seed ^ 0x9e3779b9 : seed;
+        }
+    };
+
+    template<> struct hash<Slic3r::Vec2d> {
+        std::size_t operator()(const Slic3r::Vec2d& v) const noexcept {
+            std::size_t seed = std::hash<double>{}(v.x());
+            boost::hash_combine(seed, std::hash<double>{}(v.y()));
+            return seed;
+        }
+    };
+
+    template<> struct hash<Slic3r::Vec3d> {
+        std::size_t operator()(const Slic3r::Vec3d& v) const noexcept {
+            std::size_t seed = std::hash<double>{}(v.x());
+            boost::hash_combine(seed, std::hash<double>{}(v.y()));
+            boost::hash_combine(seed, std::hash<double>{}(v.z()));
+            return seed;
+        }
+    };
+}
+
 namespace Slic3r {
 
 // Name of the configuration option.
@@ -137,6 +179,7 @@ public:
     virtual void                setInt(int /* val */) { throw BadOptionTypeException("Calling ConfigOption::setInt on a non-int ConfigOption"); }
     virtual bool                operator==(const ConfigOption &rhs) const = 0;
     bool                        operator!=(const ConfigOption &rhs) const { return ! (*this == rhs); }
+    virtual size_t              hash()          const throw() = 0;
     bool                        is_scalar()     const { return (int(this->type()) & int(coVectorType)) == 0; }
     bool                        is_vector()     const { return ! this->is_scalar(); }
     // If this option is nullable, then it may have its value or values set to nil.
@@ -185,8 +228,10 @@ public:
         return this->value == static_cast<const ConfigOptionSingle<T>*>(&rhs)->value;
     }
 
-    bool operator==(const T &rhs) const { return this->value == rhs; }
+    bool operator==(const T &rhs) const throw() { return this->value == rhs; }
-    bool operator!=(const T &rhs) const { return this->value != rhs; }
+    bool operator!=(const T &rhs) const throw() { return this->value != rhs; }
+
+    size_t hash() const throw() override { return std::hash<T>{}(this->value); }
 
 private:
 	friend class cereal::access;
@@ -339,8 +384,16 @@ public:
         return this->values == static_cast<const ConfigOptionVector<T>*>(&rhs)->values;
     }
 
-    bool operator==(const std::vector<T> &rhs) const { return this->values == rhs; }
+    bool operator==(const std::vector<T> &rhs) const throw() { return this->values == rhs; }
-    bool operator!=(const std::vector<T> &rhs) const { return this->values != rhs; }
+    bool operator!=(const std::vector<T> &rhs) const throw() { return this->values != rhs; }
+
+    size_t hash() const throw() override {
+        std::hash<T> hasher;
+        size_t seed = 0;
+        for (const auto &v : this->values)
+            boost::hash_combine(seed, hasher(v));
+        return seed;
+    }
 
     // Is this option overridden by another option?
     // An option overrides another option if it is not nil and not equal.
@@ -413,7 +466,7 @@ public:
     ConfigOptionType        type()      const override { return static_type(); }
     double                  getFloat()  const override { return this->value; }
     ConfigOption*           clone()     const override { return new ConfigOptionFloat(*this); }
-    bool                    operator==(const ConfigOptionFloat &rhs) const { return this->value == rhs.value; }
+    bool                    operator==(const ConfigOptionFloat &rhs) const throw() { return this->value == rhs.value; }
     
     std::string serialize() const override
     {
@@ -454,7 +507,7 @@ public:
     static ConfigOptionType static_type() { return coFloats; }
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionFloatsTempl(*this); }
-    bool                    operator==(const ConfigOptionFloatsTempl &rhs) const { return vectors_equal(this->values, rhs.values); }
+    bool                    operator==(const ConfigOptionFloatsTempl &rhs) const throw() { return vectors_equal(this->values, rhs.values); }
     bool 					operator==(const ConfigOption &rhs) const override {
         if (rhs.type() != this->type())
             throw Slic3r::RuntimeError("ConfigOptionFloatsTempl: Comparing incompatible types");
@@ -566,7 +619,7 @@ public:
     int                     getInt() const override { return this->value; }
     void                    setInt(int val) override { this->value = val; }
     ConfigOption*           clone()  const override { return new ConfigOptionInt(*this); }
-    bool                    operator==(const ConfigOptionInt &rhs) const { return this->value == rhs.value; }
+    bool                    operator==(const ConfigOptionInt &rhs) const throw() { return this->value == rhs.value; }
     
     std::string serialize() const override 
     {
@@ -606,7 +659,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionIntsTempl(*this); }
     ConfigOptionIntsTempl&  operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionIntsTempl &rhs) const { return this->values == rhs.values; }
+    bool                    operator==(const ConfigOptionIntsTempl &rhs) const throw() { return this->values == rhs.values; }
     // Could a special "nil" value be stored inside the vector, indicating undefined value?
     bool 					nullable() const override { return NULLABLE; }
     // Special "nil" value to be stored into the vector if this->supports_nil().
@@ -689,7 +742,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionString(*this); }
     ConfigOptionString&     operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionString &rhs) const { return this->value == rhs.value; }
+    bool                    operator==(const ConfigOptionString &rhs) const throw() { return this->value == rhs.value; }
     bool 					empty() const { return this->value.empty(); }
 
     std::string serialize() const override
@@ -722,7 +775,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionStrings(*this); }
     ConfigOptionStrings&    operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionStrings &rhs) const { return this->values == rhs.values; }
+    bool                    operator==(const ConfigOptionStrings &rhs) const throw() { return this->values == rhs.values; }
     bool					is_nil(size_t) const override { return false; }
 
     std::string serialize() const override
@@ -757,7 +810,8 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionPercent(*this); }
     ConfigOptionPercent&    operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionPercent &rhs) const { return this->value == rhs.value; }
+    bool                    operator==(const ConfigOptionPercent &rhs) const throw() { return this->value == rhs.value; }
+
     double                  get_abs_value(double ratio_over) const { return ratio_over * this->value / 100; }
     
     std::string serialize() const override 
@@ -796,8 +850,8 @@ public:
     static ConfigOptionType static_type() { return coPercents; }
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionPercentsTempl(*this); }
-    ConfigOptionPercentsTempl&   operator=(const ConfigOption *opt) { this->set(opt); return *this; }
+    ConfigOptionPercentsTempl& operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionPercentsTempl &rhs) const { return this->values == rhs.values; }
+    bool                    operator==(const ConfigOptionPercentsTempl &rhs) const throw() { return this->values == rhs.values; }
 
     std::string serialize() const override
     {
@@ -856,8 +910,12 @@ public:
         assert(dynamic_cast<const ConfigOptionFloatOrPercent*>(&rhs));
         return *this == *static_cast<const ConfigOptionFloatOrPercent*>(&rhs);
     }
-    bool                        operator==(const ConfigOptionFloatOrPercent &rhs) const 
+    bool                        operator==(const ConfigOptionFloatOrPercent &rhs) const throw()
         { return this->value == rhs.value && this->percent == rhs.percent; }
+    size_t                      hash() const throw() override {
+        size_t seed = std::hash<double>{}(this->value);
+        return this->percent ? seed ^ 0x9e3779b9 : seed;
+    }
     double                      get_abs_value(double ratio_over) const 
         { return this->percent ? (ratio_over * this->value / 100) : this->value; }
 
@@ -891,27 +949,6 @@ private:
 	template<class Archive> void serialize(Archive &ar) { ar(cereal::base_class<ConfigOptionPercent>(this), percent); }
 };
 
-
-struct FloatOrPercent
-{
-    double  value;
-    bool    percent;
-
-private:
-    friend class cereal::access;
-    template<class Archive> void serialize(Archive & ar) { ar(this->value); ar(this->percent); }
-};
-
-inline bool operator==(const FloatOrPercent &l, const FloatOrPercent &r)
-{
-    return l.value == r.value && l.percent == r.percent;
-}
-
-inline bool operator!=(const FloatOrPercent& l, const FloatOrPercent& r)
-{
-    return !(l == r);
-}
-
 template<bool NULLABLE>
 class ConfigOptionFloatsOrPercentsTempl : public ConfigOptionVector<FloatOrPercent>
 {
@@ -925,13 +962,14 @@ public:
     static ConfigOptionType static_type() { return coFloatsOrPercents; }
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionFloatsOrPercentsTempl(*this); }
-    bool                    operator==(const ConfigOptionFloatsOrPercentsTempl &rhs) const { return vectors_equal(this->values, rhs.values); }
+    bool                    operator==(const ConfigOptionFloatsOrPercentsTempl &rhs) const throw() { return vectors_equal(this->values, rhs.values); }
     bool                    operator==(const ConfigOption &rhs) const override {
         if (rhs.type() != this->type())
             throw Slic3r::RuntimeError("ConfigOptionFloatsOrPercentsTempl: Comparing incompatible types");
         assert(dynamic_cast<const ConfigOptionVector<FloatOrPercent>*>(&rhs));
         return vectors_equal(this->values, static_cast<const ConfigOptionVector<FloatOrPercent>*>(&rhs)->values);
     }
+
     // Could a special "nil" value be stored inside the vector, indicating undefined value?
     bool                    nullable() const override { return NULLABLE; }
     // Special "nil" value to be stored into the vector if this->supports_nil().
@@ -1038,7 +1076,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionPoint(*this); }
     ConfigOptionPoint&      operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionPoint &rhs) const { return this->value == rhs.value; }
+    bool                    operator==(const ConfigOptionPoint &rhs) const throw() { return this->value == rhs.value; }
 
     std::string serialize() const override
     {
@@ -1074,7 +1112,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionPoints(*this); }
     ConfigOptionPoints&     operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionPoints &rhs) const { return this->values == rhs.values; }
+    bool                    operator==(const ConfigOptionPoints &rhs) const throw() { return this->values == rhs.values; }
     bool					is_nil(size_t) const override { return false; }
 
     std::string serialize() const override
@@ -1146,7 +1184,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionPoint3(*this); }
     ConfigOptionPoint3&     operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionPoint3 &rhs) const { return this->value == rhs.value; }
+    bool                    operator==(const ConfigOptionPoint3 &rhs) const throw() { return this->value == rhs.value; }
 
     std::string serialize() const override
     {
@@ -1183,7 +1221,7 @@ public:
     bool                    getBool()   const override { return this->value; }
     ConfigOption*           clone()     const override { return new ConfigOptionBool(*this); }
     ConfigOptionBool&       operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionBool &rhs) const { return this->value == rhs.value; }
+    bool                    operator==(const ConfigOptionBool &rhs) const throw() { return this->value == rhs.value; }
 
     std::string serialize() const override
     {
@@ -1217,7 +1255,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionBoolsTempl(*this); }
     ConfigOptionBoolsTempl& operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionBoolsTempl &rhs) const { return this->values == rhs.values; }
+    bool                    operator==(const ConfigOptionBoolsTempl &rhs) const throw() { return this->values == rhs.values; }
     // Could a special "nil" value be stored inside the vector, indicating undefined value?
     bool 					nullable() const override { return NULLABLE; }
     // Special "nil" value to be stored into the vector if this->supports_nil().
@@ -1311,7 +1349,7 @@ public:
     ConfigOptionType        type()  const override { return static_type(); }
     ConfigOption*           clone() const override { return new ConfigOptionEnum<T>(*this); }
     ConfigOptionEnum<T>&    operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                    operator==(const ConfigOptionEnum<T> &rhs) const { return this->value == rhs.value; }
+    bool                    operator==(const ConfigOptionEnum<T> &rhs) const throw() { return this->value == rhs.value; }
     int                     getInt() const override { return (int)this->value; }
     void                    setInt(int val) override { this->value = T(val); }
 
@@ -1397,7 +1435,7 @@ public:
     ConfigOptionType            type()  const override { return static_type(); }
     ConfigOption*               clone() const override { return new ConfigOptionEnumGeneric(*this); }
     ConfigOptionEnumGeneric&    operator=(const ConfigOption *opt) { this->set(opt); return *this; }
-    bool                        operator==(const ConfigOptionEnumGeneric &rhs) const { return this->value == rhs.value; }
+    bool                        operator==(const ConfigOptionEnumGeneric &rhs) const throw() { return this->value == rhs.value; }
 
     bool operator==(const ConfigOption &rhs) const override
     {

src/libslic3r/ExPolygon.hpp

@@ -360,6 +360,8 @@ extern std::vector<BoundingBox> get_extents_vector(const ExPolygons &polygons);
 extern bool        remove_sticks(ExPolygon &poly);
 extern void 	   keep_largest_contour_only(ExPolygons &polygons);
 
+inline double area(const ExPolygon &poly) { return poly.area(); }
+
 inline double area(const ExPolygons &polys)
 {
     double s = 0.;

src/libslic3r/Execution/Execution.hpp

@@ -10,10 +10,6 @@
 
 namespace Slic3r {
 
-// Borrowed from C++20
-template<class T>
-using remove_cvref_t = std::remove_reference_t<std::remove_cv_t<T>>;
-
 // Override for valid execution policies
 template<class EP> struct IsExecutionPolicy_ : public std::false_type {};
 

src/libslic3r/ExtrusionEntity.cpp

@@ -318,7 +318,7 @@ std::string ExtrusionEntity::role_to_string(ExtrusionRole role)
         case erIroning                      : return L("Ironing");
         case erBridgeInfill                 : return L("Bridge infill");
         case erGapFill                      : return L("Gap fill");
-        case erSkirt                        : return L("Skirt");
+        case erSkirt                        : return L("Skirt/Brim");
         case erSupportMaterial              : return L("Support material");
         case erSupportMaterialInterface     : return L("Support material interface");
         case erWipeTower                    : return L("Wipe tower");
@@ -349,7 +349,7 @@ ExtrusionRole ExtrusionEntity::string_to_role(const std::string_view role)
         return erBridgeInfill;
     else if (role == L("Gap fill"))
         return erGapFill;
-    else if (role == L("Skirt"))
+    else if (role == L("Skirt") || role == L("Skirt/Brim")) // "Skirt" is for backward compatibility with 2.3.1 and earlier
         return erSkirt;
     else if (role == L("Support material"))
         return erSupportMaterial;

src/libslic3r/Fill/FillBase.cpp

@@ -595,7 +595,6 @@ static inline bool line_rounded_thick_segment_collision(
         // Very short line vector. Just test whether the center point is inside the offset line.
         Vec2d lpt = 0.5 * (line_a + line_b);
         if (segment_l > SCALED_EPSILON) {
-            struct Linef { Vec2d a, b; };
             intersects = line_alg::distance_to_squared(Linef{ segment_a, segment_b }, lpt) < offset2;
         } else
             intersects = (0.5 * (segment_a + segment_b) - lpt).squaredNorm() < offset2;
@@ -1196,8 +1195,6 @@ static inline void mark_boundary_segments_overlapping_infill(
     // Spacing (width) of the infill lines.
     const double                                            spacing)
 {
-    struct Linef { Vec2d a; Vec2d b; };
-
     for (ContourIntersectionPoint &cp : graph.map_infill_end_point_to_boundary) {
         const Points                &contour         = graph.boundary[cp.contour_idx];
         const std::vector<double>   &contour_params  = graph.boundary_params[cp.contour_idx];
@@ -2003,9 +2000,8 @@ static double evaluate_support_arch_cost(const Polyline &pl)
 
     double dmax = 0;
     // Maximum distance in Y axis out of the (ymin, ymax) band and from the (front, back) line.
-    struct Linef { Vec2d a, b; };
     Linef line { front.cast<double>(), back.cast<double>() };
-    for (const Point pt : pl.points)
+    for (const Point &pt : pl.points)
         dmax = std::max<double>(std::max(dmax, line_alg::distance_to(line, Vec2d(pt.cast<double>()))), std::max(pt.y() - ymax, ymin - pt.y()));
     return dmax;
 }

src/libslic3r/Flow.cpp

@@ -89,18 +89,11 @@ double Flow::extrusion_width(const std::string& opt_key, const ConfigOptionFloat
 
 	if (opt->percent) {
 		auto opt_key_layer_height = first_layer ? "first_layer_height" : "layer_height";
-    	auto opt_layer_height = config.option(opt_key_layer_height);
+        auto opt_layer_height = config.option(opt_key_layer_height);
     	if (opt_layer_height == nullptr)
     		throw_on_missing_variable(opt_key, opt_key_layer_height);
-    	double layer_height = opt_layer_height->getFloat();
+        assert(! first_layer || ! static_cast<const ConfigOptionFloatOrPercent*>(opt_layer_height)->percent);
-    	if (first_layer && static_cast<const ConfigOptionFloatOrPercent*>(opt_layer_height)->percent) {
+		return opt->get_abs_value(opt_layer_height->getFloat());
-    		// first_layer_height depends on layer_height.
-	    	opt_layer_height = config.option("layer_height");
-	    	if (opt_layer_height == nullptr)
-	    		throw_on_missing_variable(opt_key, "layer_height");
-	    	layer_height *= 0.01 * opt_layer_height->getFloat();
-    	}
-		return opt->get_abs_value(layer_height);
 	}
 
 	if (opt->value == 0.) {
@@ -238,13 +231,14 @@ Flow support_material_flow(const PrintObject *object, float layer_height)
 
 Flow support_material_1st_layer_flow(const PrintObject *object, float layer_height)
 {
-    const auto &width = (object->print()->config().first_layer_extrusion_width.value > 0) ? object->print()->config().first_layer_extrusion_width : object->config().support_material_extrusion_width;
+    const PrintConfig &print_config = object->print()->config();
+    const auto &width = (print_config.first_layer_extrusion_width.value > 0) ? print_config.first_layer_extrusion_width : object->config().support_material_extrusion_width;
     return Flow::new_from_config_width(
         frSupportMaterial,
         // The width parameter accepted by new_from_config_width is of type ConfigOptionFloatOrPercent, the Flow class takes care of the percent to value substitution.
         (width.value > 0) ? width : object->config().extrusion_width,
-        float(object->print()->config().nozzle_diameter.get_at(object->config().support_material_extruder-1)),
+        float(print_config.nozzle_diameter.get_at(object->config().support_material_extruder-1)),
-        (layer_height > 0.f) ? layer_height : float(object->config().first_layer_height.get_abs_value(object->config().layer_height.value)));
+        (layer_height > 0.f) ? layer_height : float(print_config.first_layer_height.get_abs_value(object->config().layer_height.value)));
 }
 
 Flow support_material_interface_flow(const PrintObject *object, float layer_height)

src/libslic3r/Format/SL1.cpp

@@ -248,7 +248,7 @@ std::vector<ExPolygons> extract_slices_from_sla_archive(
     {
         double          incr, val, prev;
         bool            stop = false;
-        tbb::spin_mutex mutex;
+        tbb::spin_mutex mutex = {};
     } st {100. / slices.size(), 0., 0.};
 
     tbb::parallel_for(size_t(0), arch.images.size(),
@@ -372,6 +372,13 @@ void fill_iniconf(ConfMap &m, const SLAPrint &print)
     m["numFast"]      = std::to_string(stats.fast_layers_count);
     m["printTime"]    = std::to_string(stats.estimated_print_time);
 
+    bool hollow_en = false;
+    auto it = print.objects().begin();
+    while (!hollow_en && it != print.objects().end())
+        hollow_en = (*it++)->config().hollowing_enable;
+
+    m["hollow"] = hollow_en ? "1" : "0";
+    
     m["action"] = "print";
 }
 

src/libslic3r/GCode.cpp

@@ -1111,7 +1111,8 @@ void GCode::_do_export(Print& print, FILE* file, ThumbnailsGeneratorCallback thu
     // Write some terse information on the slicing parameters.
     const PrintObject *first_object         = print.objects().front();
     const double       layer_height         = first_object->config().layer_height.value;
-    const double       first_layer_height   = first_object->config().first_layer_height.get_abs_value(layer_height);
+    assert(! print.config().first_layer_height.percent);
+    const double       first_layer_height   = print.config().first_layer_height.value;
     for (const PrintRegion* region : print.regions()) {
         _write_format(file, "; external perimeters extrusion width = %.2fmm\n", region->flow(*first_object, frExternalPerimeter, layer_height).width());
         _write_format(file, "; perimeters extrusion width = %.2fmm\n",          region->flow(*first_object, frPerimeter,         layer_height).width());

src/libslic3r/GCode/CoolingBuffer.cpp

@@ -326,7 +326,7 @@ std::vector<PerExtruderAdjustments> CoolingBuffer::parse_layer_gcode(const std::
     PerExtruderAdjustments *adjustment  = &per_extruder_adjustments[map_extruder_to_per_extruder_adjustment[current_extruder]];
     const char       *line_start = gcode.c_str();
     const char       *line_end   = line_start;
-    const char        extrusion_axis = config.get_extrusion_axis()[0];
+    const char        extrusion_axis = get_extrusion_axis(config)[0];
     // Index of an existing CoolingLine of the current adjustment, which holds the feedrate setting command
     // for a sequence of extrusion moves.
     size_t            active_speed_modifier = size_t(-1);

src/libslic3r/GCode/GCodeProcessor.cpp

@@ -857,6 +857,12 @@ void GCodeProcessor::apply_config(const PrintConfig& config)
 
     m_time_processor.export_remaining_time_enabled = config.remaining_times.value;
     m_use_volumetric_e = config.use_volumetric_e;
+
+#if ENABLE_START_GCODE_VISUALIZATION
+    const ConfigOptionFloatOrPercent* first_layer_height = config.option<ConfigOptionFloatOrPercent>("first_layer_height");
+    if (first_layer_height != nullptr)
+        m_first_layer_height = std::abs(first_layer_height->value);
+#endif // ENABLE_START_GCODE_VISUALIZATION
 }
 
 void GCodeProcessor::apply_config(const DynamicPrintConfig& config)
@@ -1035,6 +1041,12 @@ void GCodeProcessor::apply_config(const DynamicPrintConfig& config)
     const ConfigOptionBool* use_volumetric_e = config.option<ConfigOptionBool>("use_volumetric_e");
     if (use_volumetric_e != nullptr)
         m_use_volumetric_e = use_volumetric_e->value;
+
+#if ENABLE_START_GCODE_VISUALIZATION
+    const ConfigOptionFloatOrPercent* first_layer_height = config.option<ConfigOptionFloatOrPercent>("first_layer_height");
+    if (first_layer_height != nullptr)
+        m_first_layer_height = std::abs(first_layer_height->value);
+#endif // ENABLE_START_GCODE_VISUALIZATION
 }
 
 void GCodeProcessor::enable_stealth_time_estimator(bool enabled)
@@ -1085,6 +1097,10 @@ void GCodeProcessor::reset()
 
     m_filament_diameters = std::vector<float>(Min_Extruder_Count, 1.75f);
     m_extruded_last_z = 0.0f;
+#if ENABLE_START_GCODE_VISUALIZATION
+    m_first_layer_height = 0.0f;
+    m_processing_start_custom_gcode = false;
+#endif // ENABLE_START_GCODE_VISUALIZATION
     m_g1_line_id = 0;
     m_layer_id = 0;
     m_cp_color.reset();
@@ -1450,6 +1466,9 @@ void GCodeProcessor::process_tags(const std::string_view comment)
         if (m_extrusion_role == erExternalPerimeter)
             m_seams_detector.activate(true);
 #endif // ENABLE_SEAMS_VISUALIZATION
+#if ENABLE_START_GCODE_VISUALIZATION
+        m_processing_start_custom_gcode = (m_extrusion_role == erCustom && m_g1_line_id == 0);
+#endif // ENABLE_START_GCODE_VISUALIZATION
         return;
     }
 
@@ -2194,7 +2213,11 @@ void GCodeProcessor::process_G1(const GCodeReader::GCodeLine& line)
 #endif // ENABLE_GCODE_VIEWER_DATA_CHECKING
     }
 
+#if ENABLE_START_GCODE_VISUALIZATION
+    if (type == EMoveType::Extrude && (m_width == 0.0f || m_height == 0.0f))
+#else
     if (type == EMoveType::Extrude && (m_extrusion_role == erCustom || m_width == 0.0f || m_height == 0.0f))
+#endif // ENABLE_START_GCODE_VISUALIZATION
         type = EMoveType::Travel;
 
     // time estimate section
@@ -2310,13 +2333,13 @@ void GCodeProcessor::process_G1(const GCodeReader::GCodeLine& line)
                 // Calculate the jerk depending on whether the axis is coasting in the same direction or reversing a direction.
                 float jerk =
                     (v_exit > v_entry) ?
-                    (((v_entry > 0.0f) || (v_exit < 0.0f)) ?
+                    ((v_entry > 0.0f || v_exit < 0.0f) ?
                         // coasting
                         (v_exit - v_entry) :
                         // axis reversal
                         std::max(v_exit, -v_entry)) :
                     // v_exit <= v_entry
-                    (((v_entry < 0.0f) || (v_exit > 0.0f)) ?
+                    ((v_entry < 0.0f || v_exit > 0.0f) ?
                         // coasting
                         (v_entry - v_exit) :
                         // axis reversal
@@ -2337,7 +2360,7 @@ void GCodeProcessor::process_G1(const GCodeReader::GCodeLine& line)
             float vmax_junction_threshold = vmax_junction * 0.99f;
 
             // Not coasting. The machine will stop and start the movements anyway, better to start the segment from start.
-            if ((prev.safe_feedrate > vmax_junction_threshold) && (curr.safe_feedrate > vmax_junction_threshold))
+            if (prev.safe_feedrate > vmax_junction_threshold && curr.safe_feedrate > vmax_junction_threshold)
                 vmax_junction = curr.safe_feedrate;
         }
 
@@ -2857,7 +2880,11 @@ void GCodeProcessor::store_move_vertex(EMoveType type)
         m_extrusion_role,
         m_extruder_id,
         m_cp_color.current,
+#if ENABLE_START_GCODE_VISUALIZATION
+        Vec3f(m_end_position[X], m_end_position[Y], m_processing_start_custom_gcode ? m_first_layer_height : m_end_position[Z]) + m_extruder_offsets[m_extruder_id],
+#else
         Vec3f(m_end_position[X], m_end_position[Y], m_end_position[Z]) + m_extruder_offsets[m_extruder_id],
+#endif // ENABLE_START_GCODE_VISUALIZATION
         m_end_position[E] - m_start_position[E],
         m_feedrate,
         m_width,

src/libslic3r/GCode/GCodeProcessor.hpp

@@ -520,6 +520,10 @@ namespace Slic3r {
         ExtruderTemps m_extruder_temps;
         std::vector<float> m_filament_diameters;
         float m_extruded_last_z;
+#if ENABLE_START_GCODE_VISUALIZATION
+        float m_first_layer_height; // mm
+        bool m_processing_start_custom_gcode;
+#endif // ENABLE_START_GCODE_VISUALIZATION
         unsigned int m_g1_line_id;
         unsigned int m_layer_id;
         CpColor m_cp_color;

src/libslic3r/GCode/WipeTower.cpp

@@ -546,10 +546,24 @@ WipeTower::WipeTower(const PrintConfig& config, const std::vector<std::vector<fl
         m_extra_loading_move      = float(config.extra_loading_move);
         m_set_extruder_trimpot    = config.high_current_on_filament_swap;
     }
-    // Calculate where the priming lines should be - very naive test not detecting parallelograms or custom shapes
+    // Calculate where the priming lines should be - very naive test not detecting parallelograms etc.
     const std::vector<Vec2d>& bed_points = config.bed_shape.values;
+    BoundingBoxf bb(bed_points);
+    m_bed_width = float(bb.size().x());
     m_bed_shape = (bed_points.size() == 4 ? RectangularBed : CircularBed);
-    m_bed_width = float(BoundingBoxf(bed_points).size().x());
+
+    if (m_bed_shape == CircularBed) {
+        // this may still be a custom bed, check that the points are roughly on a circle
+        double r2 = std::pow(m_bed_width/2., 2.);
+        double lim2 = std::pow(m_bed_width/10., 2.);
+        Vec2d center = bb.center();
+        for (const Vec2d& pt : bed_points)
+            if (std::abs(std::pow(pt.x()-center.x(), 2.) + std::pow(pt.y()-center.y(), 2.) - r2) > lim2) {
+                m_bed_shape = CustomBed;
+                break;
+            }
+    }
+
     m_bed_bottom_left = m_bed_shape == RectangularBed
                   ? Vec2f(bed_points.front().x(), bed_points.front().y())
                   : Vec2f::Zero();
@@ -625,10 +639,12 @@ std::vector<WipeTower::ToolChangeResult> WipeTower::prime(
 
     float prime_section_width = std::min(0.9f * m_bed_width / tools.size(), 60.f);
     box_coordinates cleaning_box(Vec2f(0.02f * m_bed_width, 0.01f + m_perimeter_width/2.f), prime_section_width, 100.f);
-    // In case of a circular bed, place it so it goes across the diameter and hope it will fit
+    if (m_bed_shape == CircularBed) {
-    if (m_bed_shape == CircularBed)
+        cleaning_box = box_coordinates(Vec2f(0.f, 0.f), prime_section_width, 100.f);
-        cleaning_box.translate(-m_bed_width/2 + m_bed_width * 0.03f, -m_bed_width * 0.12f);
+        float total_width_half = tools.size() * prime_section_width / 2.f;
-    if (m_bed_shape == RectangularBed)
+        cleaning_box.translate(-total_width_half, -std::sqrt(std::max(0.f, std::pow(m_bed_width/2, 2.f) - std::pow(1.05f * total_width_half, 2.f))));
+    }
+    else
         cleaning_box.translate(m_bed_bottom_left);
 
     std::vector<ToolChangeResult> results;

src/libslic3r/GCode/WipeTower.hpp

@@ -277,7 +277,8 @@ private:
     // Bed properties
     enum {
         RectangularBed,
-        CircularBed
+        CircularBed,
+        CustomBed
     } m_bed_shape;
     float m_bed_width; // width of the bed bounding box
     Vec2f m_bed_bottom_left; // bottom-left corner coordinates (for rectangular beds)

src/libslic3r/GCodeReader.cpp

@@ -13,13 +13,13 @@ namespace Slic3r {
 void GCodeReader::apply_config(const GCodeConfig &config)
 {
     m_config = config;
-    m_extrusion_axis = m_config.get_extrusion_axis()[0];
+    m_extrusion_axis = get_extrusion_axis(m_config)[0];
 }
 
 void GCodeReader::apply_config(const DynamicPrintConfig &config)
 {
     m_config.apply(config, true);
-    m_extrusion_axis = m_config.get_extrusion_axis()[0];
+    m_extrusion_axis = get_extrusion_axis(m_config)[0];
 }
 
 const char* GCodeReader::parse_line_internal(const char *ptr, GCodeLine &gline, std::pair<const char*, const char*> &command)

src/libslic3r/GCodeWriter.cpp

@@ -18,7 +18,7 @@ namespace Slic3r {
 void GCodeWriter::apply_print_config(const PrintConfig &print_config)
 {
     this->config.apply(print_config, true);
-    m_extrusion_axis = this->config.get_extrusion_axis();
+    m_extrusion_axis = get_extrusion_axis(this->config);
     m_single_extruder_multi_material = print_config.single_extruder_multi_material.value;
     bool is_marlin = print_config.gcode_flavor.value == gcfMarlinLegacy || print_config.gcode_flavor.value == gcfMarlinFirmware;
     m_max_acceleration = std::lrint((is_marlin && print_config.machine_limits_usage.value == MachineLimitsUsage::EmitToGCode) ?

src/libslic3r/Geometry.hpp

@@ -22,12 +22,14 @@
 #pragma warning(pop)
 #endif // _MSC_VER
 
-namespace ClipperLib {
+namespace Slic3r { 
-class PolyNode;
-using PolyNodes = std::vector<PolyNode*>;
-}
 
-namespace Slic3r { namespace Geometry {
+    namespace ClipperLib {
+        class PolyNode;
+        using PolyNodes = std::vector<PolyNode*>;
+    }
+
+namespace Geometry {
 
 // Generic result of an orientation predicate.
 enum Orientation
@@ -530,6 +532,6 @@ inline bool is_rotation_ninety_degrees(const Vec3d &rotation)
     return is_rotation_ninety_degrees(rotation.x()) && is_rotation_ninety_degrees(rotation.y()) && is_rotation_ninety_degrees(rotation.z());
 }
 
-} }
+} } // namespace Slicer::Geometry
 
 #endif

src/libslic3r/Line.hpp

@@ -4,6 +4,8 @@
 #include "libslic3r.h"
 #include "Point.hpp"
 
+#include <type_traits>
+
 namespace Slic3r {
 
 class BoundingBox;
@@ -20,12 +22,28 @@ Linef3 transform(const Linef3& line, const Transform3d& t);
 
 namespace line_alg {
 
+template<class L, class En = void> struct Traits {
+    static constexpr int Dim = L::Dim;
+    using Scalar = typename L::Scalar;
+
+    static Vec<Dim, Scalar>& get_a(L &l) { return l.a; }
+    static Vec<Dim, Scalar>& get_b(L &l) { return l.b; }
+    static const Vec<Dim, Scalar>& get_a(const L &l) { return l.a; }
+    static const Vec<Dim, Scalar>& get_b(const L &l) { return l.b; }
+};
+
+template<class L> const constexpr int Dim = Traits<remove_cvref_t<L>>::Dim;
+template<class L> using Scalar = typename Traits<remove_cvref_t<L>>::Scalar;
+
+template<class L> auto get_a(L &&l) { return Traits<remove_cvref_t<L>>::get_a(l); }
+template<class L> auto get_b(L &&l) { return Traits<remove_cvref_t<L>>::get_b(l); }
+
 // Distance to the closest point of line.
-template<class L, class T, int N>
+template<class L>
-double distance_to_squared(const L &line, const Vec<N, T> &point)
+double distance_to_squared(const L &line, const Vec<Dim<L>, Scalar<L>> &point)
 {
-    const Vec<N, double>  v  = (line.b - line.a).template cast<double>();
+    const Vec<Dim<L>, double>  v  = (get_b(line) - get_a(line)).template cast<double>();
-    const Vec<N, double>  va = (point  - line.a).template cast<double>();
+    const Vec<Dim<L>, double>  va = (point  - get_a(line)).template cast<double>();
     const double  l2 = v.squaredNorm();  // avoid a sqrt
     if (l2 == 0.0)
         // a == b case
@@ -35,12 +53,12 @@ double distance_to_squared(const L &line, const Vec<N, T> &point)
     // It falls where t = [(this-a) . (b-a)] / |b-a|^2
     const double t = va.dot(v) / l2;
     if (t < 0.0)      return va.squaredNorm();  // beyond the 'a' end of the segment
-    else if (t > 1.0) return (point - line.b).template cast<double>().squaredNorm();  // beyond the 'b' end of the segment
+    else if (t > 1.0) return (point - get_b(line)).template cast<double>().squaredNorm();  // beyond the 'b' end of the segment
     return (t * v - va).squaredNorm();
 }
 
-template<class L, class T, int N>
+template<class L>
-double distance_to(const L &line, const Vec<N, T> &point)
+double distance_to(const L &line, const Vec<Dim<L>, Scalar<L>> &point)
 {
     return std::sqrt(distance_to_squared(line, point));
 }
@@ -84,6 +102,9 @@ public:
 
     Point a;
     Point b;
+
+    static const constexpr int Dim = 2;
+    using Scalar = Point::Scalar;
 };
 
 class ThickLine : public Line
@@ -107,6 +128,9 @@ public:
 
     Vec3crd a;
     Vec3crd b;
+
+    static const constexpr int Dim = 3;
+    using Scalar = Vec3crd::Scalar;
 };
 
 class Linef
@@ -117,6 +141,9 @@ public:
 
     Vec2d a;
     Vec2d b;
+
+    static const constexpr int Dim = 2;
+    using Scalar = Vec2d::Scalar;
 };
 
 class Linef3
@@ -133,6 +160,9 @@ public:
 
     Vec3d a;
     Vec3d b;
+
+    static const constexpr int Dim = 3;
+    using Scalar = Vec3d::Scalar;
 };
 
 BoundingBox get_extents(const Lines &lines);

src/libslic3r/MTUtils.hpp

@@ -106,8 +106,8 @@ template<class C> bool all_of(const C &container)
                        });
 }
 
-template<class T>
+//template<class T>
-using remove_cvref_t = std::remove_reference_t<std::remove_cv_t<T>>;
+//using remove_cvref_t = std::remove_reference_t<std::remove_cv_t<T>>;
 
 /// Exactly like Matlab https://www.mathworks.com/help/matlab/ref/linspace.html
 template<class T, class I, class = IntegerOnly<I>>

src/libslic3r/MinAreaBoundingBox.cpp

@@ -14,55 +14,9 @@
 #include <boost/multiprecision/integer.hpp>
 #endif
 
-#include <libnest2d/geometry_traits.hpp>
+#include <libnest2d/backends/libslic3r/geometries.hpp>
 #include <libnest2d/utils/rotcalipers.hpp>
 
-namespace libnest2d {
-
-template<> struct PointType<Slic3r::Points>      { using Type = Slic3r::Point; };
-template<> struct CoordType<Slic3r::Point>       { using Type = coord_t; };
-template<> struct ShapeTag<Slic3r::ExPolygon>    { using Type = PolygonTag; };
-template<> struct ShapeTag<Slic3r::Polygon>      { using Type = PolygonTag; };
-template<> struct ShapeTag<Slic3r::Points>       { using Type = PathTag; };
-template<> struct ShapeTag<Slic3r::Point>        { using Type = PointTag; };
-template<> struct ContourType<Slic3r::ExPolygon> { using Type = Slic3r::Points; };
-template<> struct ContourType<Slic3r::Polygon>   { using Type = Slic3r::Points; };
-
-namespace pointlike {
-
-template<> inline coord_t x(const Slic3r::Point& p) { return p.x(); }
-template<> inline coord_t y(const Slic3r::Point& p) { return p.y(); }
-template<> inline coord_t& x(Slic3r::Point& p)      { return p.x(); }
-template<> inline coord_t& y(Slic3r::Point& p)      { return p.y(); }
-
-} // pointlike
-
-namespace shapelike {
-template<> inline Slic3r::Points& contour(Slic3r::ExPolygon& sh) { return sh.contour.points; }
-template<> inline const Slic3r::Points& contour(const Slic3r::ExPolygon& sh) { return sh.contour.points; }
-template<> inline Slic3r::Points& contour(Slic3r::Polygon& sh) { return sh.points; }
-template<> inline const Slic3r::Points& contour(const Slic3r::Polygon& sh) { return sh.points; }
-
-template<> Slic3r::Points::iterator begin(Slic3r::Points& pts, const PathTag&) { return pts.begin();}
-template<> Slic3r::Points::const_iterator cbegin(const Slic3r::Points& pts, const PathTag&) { return pts.cbegin(); }
-template<> Slic3r::Points::iterator end(Slic3r::Points& pts, const PathTag&) { return pts.end();}
-template<> Slic3r::Points::const_iterator cend(const Slic3r::Points& pts, const PathTag&) { return pts.cend(); }
-
-template<> inline Slic3r::ExPolygon create<Slic3r::ExPolygon>(Slic3r::Points&& contour)
-{
-    Slic3r::ExPolygon expoly; expoly.contour.points.swap(contour);
-    return expoly;
-}
-
-template<> inline Slic3r::Polygon create<Slic3r::Polygon>(Slic3r::Points&& contour)
-{
-    Slic3r::Polygon poly; poly.points.swap(contour);
-    return poly;
-}
-
-} // shapelike
-} // libnest2d
-
 namespace Slic3r {
 
 // Used as compute type.
@@ -74,13 +28,22 @@ using Rational = boost::rational<boost::multiprecision::int128_t>;
 using Rational = boost::rational<__int128>;
 #endif
 
+template<class P>
+libnest2d::RotatedBox<Point, Unit> minAreaBoundigBox_(
+    const P &p, MinAreaBoundigBox::PolygonLevel lvl)
+{
+    P chull = lvl == MinAreaBoundigBox::pcConvex ?
+                        p :
+                        libnest2d::sl::convexHull(p);
+
+    libnest2d::removeCollinearPoints(chull);
+
+    return libnest2d::minAreaBoundingBox<P, Unit, Rational>(chull);
+}
+
 MinAreaBoundigBox::MinAreaBoundigBox(const Polygon &p, PolygonLevel pc)
 {
-    const Polygon &chull = pc == pcConvex ? p :
+    libnest2d::RotatedBox<Point, Unit> box = minAreaBoundigBox_(p, pc);
-                                            libnest2d::sl::convexHull(p);
-
-    libnest2d::RotatedBox<Point, Unit> box =
-        libnest2d::minAreaBoundingBox<Polygon, Unit, Rational>(chull);
 
     m_right  = libnest2d::cast<long double>(box.right_extent());
     m_bottom = libnest2d::cast<long double>(box.bottom_extent());
@@ -89,11 +52,7 @@ MinAreaBoundigBox::MinAreaBoundigBox(const Polygon &p, PolygonLevel pc)
 
 MinAreaBoundigBox::MinAreaBoundigBox(const ExPolygon &p, PolygonLevel pc)
 {
-    const ExPolygon &chull = pc == pcConvex ? p :
+    libnest2d::RotatedBox<Point, Unit> box = minAreaBoundigBox_(p, pc);
-                                              libnest2d::sl::convexHull(p);
-
-    libnest2d::RotatedBox<Point, Unit> box =
-        libnest2d::minAreaBoundingBox<ExPolygon, Unit, Rational>(chull);
 
     m_right  = libnest2d::cast<long double>(box.right_extent());
     m_bottom = libnest2d::cast<long double>(box.bottom_extent());
@@ -102,11 +61,7 @@ MinAreaBoundigBox::MinAreaBoundigBox(const ExPolygon &p, PolygonLevel pc)
 
 MinAreaBoundigBox::MinAreaBoundigBox(const Points &pts, PolygonLevel pc)
 {
-    const Points &chull = pc == pcConvex ? pts :
+    libnest2d::RotatedBox<Point, Unit> box = minAreaBoundigBox_(pts, pc);
-                                           libnest2d::sl::convexHull(pts);
-
-    libnest2d::RotatedBox<Point, Unit> box =
-        libnest2d::minAreaBoundingBox<Points, Unit, Rational>(chull);
 
     m_right  = libnest2d::cast<long double>(box.right_extent());
     m_bottom = libnest2d::cast<long double>(box.bottom_extent());

src/libslic3r/MinAreaBoundingBox.hpp

@@ -27,11 +27,7 @@ public:
    
     // Constructors with various types of geometry data used in Slic3r.
     // If the convexity is known apriory, pcConvex can be used to skip
-    // convex hull calculation. It is very important that the input polygons
+    // convex hull calculation.
-    // do NOT have any collinear points (except for the first and the last 
-    // vertex being the same -- meaning a closed polygon for boost)
-    // To make sure this constraint is satisfied, you can call 
-    // remove_collinear_points on the input polygon before handing over here)
     explicit MinAreaBoundigBox(const Polygon&, PolygonLevel = pcSimple);
     explicit MinAreaBoundigBox(const ExPolygon&, PolygonLevel = pcSimple);
     explicit MinAreaBoundigBox(const Points&, PolygonLevel = pcSimple);

src/libslic3r/Model.cpp

@@ -833,18 +833,6 @@ indexed_triangle_set ModelObject::raw_indexed_triangle_set() const
     return out;
 }
 
-// Non-transformed (non-rotated, non-scaled, non-translated) sum of all object volumes.
-TriangleMesh ModelObject::full_raw_mesh() const
-{
-    TriangleMesh mesh;
-    for (const ModelVolume *v : this->volumes)
-    {
-        TriangleMesh vol_mesh(v->mesh());
-        vol_mesh.transform(v->get_matrix());
-        mesh.merge(vol_mesh);
-    }
-    return mesh;
-}
 
 const BoundingBoxf3& ModelObject::raw_mesh_bounding_box() const
 {

src/libslic3r/Model.hpp

@@ -289,8 +289,6 @@ public:
     TriangleMesh raw_mesh() const;
     // The same as above, but producing a lightweight indexed_triangle_set.
     indexed_triangle_set raw_indexed_triangle_set() const;
-    // Non-transformed (non-rotated, non-scaled, non-translated) sum of all object volumes.
-    TriangleMesh full_raw_mesh() const;
     // A transformed snug bounding box around the non-modifier object volumes, without the translation applied.
     // This bounding box is only used for the actual slicing.
     const BoundingBoxf3& raw_bounding_box() const;

src/libslic3r/MultiPoint.hpp

@@ -84,6 +84,13 @@ public:
 
     static Points _douglas_peucker(const Points &points, const double tolerance);
     static Points visivalingam(const Points& pts, const double& tolerance);
+
+    inline auto begin()        { return points.begin(); }
+    inline auto begin()  const { return points.begin(); }
+    inline auto end()          { return points.end();   }
+    inline auto end()    const { return points.end();   }
+    inline auto cbegin() const { return points.begin(); }
+    inline auto cend()   const { return points.end();   }
 };
 
 class MultiPoint3

src/libslic3r/Point.hpp

@@ -17,42 +17,42 @@ class BoundingBox;
 class Line;
 class MultiPoint;
 class Point;
-typedef Point Vector;
+using Vector = Point;
 
 // Eigen types, to replace the Slic3r's own types in the future.
 // Vector types with a fixed point coordinate base type.
-typedef Eigen::Matrix<coord_t,  2, 1, Eigen::DontAlign> Vec2crd;
+using Vec2crd = Eigen::Matrix<coord_t,  2, 1, Eigen::DontAlign>;
-typedef Eigen::Matrix<coord_t,  3, 1, Eigen::DontAlign> Vec3crd;
+using Vec3crd = Eigen::Matrix<coord_t,  3, 1, Eigen::DontAlign>;
-typedef Eigen::Matrix<int,      2, 1, Eigen::DontAlign> Vec2i;
+using Vec2i   = Eigen::Matrix<int,      2, 1, Eigen::DontAlign>;
-typedef Eigen::Matrix<int,      3, 1, Eigen::DontAlign> Vec3i;
+using Vec3i   = Eigen::Matrix<int,      3, 1, Eigen::DontAlign>;
-typedef Eigen::Matrix<int32_t,  2, 1, Eigen::DontAlign> Vec2i32;
+using Vec2i32 = Eigen::Matrix<int32_t,  2, 1, Eigen::DontAlign>;
-typedef Eigen::Matrix<int64_t,  2, 1, Eigen::DontAlign> Vec2i64;
+using Vec2i64 = Eigen::Matrix<int64_t,  2, 1, Eigen::DontAlign>;
-typedef Eigen::Matrix<int32_t,  3, 1, Eigen::DontAlign> Vec3i32;
+using Vec3i32 = Eigen::Matrix<int32_t,  3, 1, Eigen::DontAlign>;
-typedef Eigen::Matrix<int64_t,  3, 1, Eigen::DontAlign> Vec3i64;
+using Vec3i64 = Eigen::Matrix<int64_t,  3, 1, Eigen::DontAlign>;
 
 // Vector types with a double coordinate base type.
-typedef Eigen::Matrix<float,    2, 1, Eigen::DontAlign> Vec2f;
+using Vec2f   = Eigen::Matrix<float,    2, 1, Eigen::DontAlign>;
-typedef Eigen::Matrix<float,    3, 1, Eigen::DontAlign> Vec3f;
+using Vec3f   = Eigen::Matrix<float,    3, 1, Eigen::DontAlign>;
-typedef Eigen::Matrix<double,   2, 1, Eigen::DontAlign> Vec2d;
+using Vec2d   = Eigen::Matrix<double,   2, 1, Eigen::DontAlign>;
-typedef Eigen::Matrix<double,   3, 1, Eigen::DontAlign> Vec3d;
+using Vec3d   = Eigen::Matrix<double,   3, 1, Eigen::DontAlign>;
 
-typedef std::vector<Point>                              Points;
+using Points         = std::vector<Point>;
-typedef std::vector<Point*>                             PointPtrs;
+using PointPtrs      = std::vector<Point*>;
-typedef std::vector<const Point*>                       PointConstPtrs;
+using PointConstPtrs = std::vector<const Point*>;
-typedef std::vector<Vec3crd>                            Points3;
+using Points3        = std::vector<Vec3crd>;
-typedef std::vector<Vec2d>                              Pointfs;
+using Pointfs        = std::vector<Vec2d>;
-typedef std::vector<Vec2d>                              Vec2ds;
+using Vec2ds         = std::vector<Vec2d>;
-typedef std::vector<Vec3d>                              Pointf3s;
+using Pointf3s       = std::vector<Vec3d>;
 
-typedef Eigen::Matrix<float,  2, 2, Eigen::DontAlign> Matrix2f;
+using Matrix2f       = Eigen::Matrix<float,  2, 2, Eigen::DontAlign>;
-typedef Eigen::Matrix<double, 2, 2, Eigen::DontAlign> Matrix2d;
+using Matrix2d       = Eigen::Matrix<double, 2, 2, Eigen::DontAlign>;
-typedef Eigen::Matrix<float,  3, 3, Eigen::DontAlign> Matrix3f;
+using Matrix3f       = Eigen::Matrix<float,  3, 3, Eigen::DontAlign>;
-typedef Eigen::Matrix<double, 3, 3, Eigen::DontAlign> Matrix3d;
+using Matrix3d       = Eigen::Matrix<double, 3, 3, Eigen::DontAlign>;
 
-typedef Eigen::Transform<float,  2, Eigen::Affine, Eigen::DontAlign> Transform2f;
+using Transform2f    = Eigen::Transform<float,  2, Eigen::Affine, Eigen::DontAlign>;
-typedef Eigen::Transform<double, 2, Eigen::Affine, Eigen::DontAlign> Transform2d;
+using Transform2d    = Eigen::Transform<double, 2, Eigen::Affine, Eigen::DontAlign>;
-typedef Eigen::Transform<float,  3, Eigen::Affine, Eigen::DontAlign> Transform3f;
+using Transform3f    = Eigen::Transform<float,  3, Eigen::Affine, Eigen::DontAlign>;
-typedef Eigen::Transform<double, 3, Eigen::Affine, Eigen::DontAlign> Transform3d;
+using Transform3d    = Eigen::Transform<double, 3, Eigen::Affine, Eigen::DontAlign>;
 
 inline bool operator<(const Vec2d &lhs, const Vec2d &rhs) { return lhs(0) < rhs(0) || (lhs(0) == rhs(0) && lhs(1) < rhs(1)); }
 
@@ -101,7 +101,7 @@ template<int N, class T> using Vec = Eigen::Matrix<T,  N, 1, Eigen::DontAlign, N
 class Point : public Vec2crd
 {
 public:
-    typedef coord_t coord_type;
+    using coord_type = coord_t;
 
     Point() : Vec2crd(0, 0) {}
     Point(int32_t x, int32_t y) : Vec2crd(coord_t(x), coord_t(y)) {}
@@ -337,7 +337,7 @@ public:
     }
 
 private:
-    typedef typename std::unordered_multimap<Vec2crd, ValueType, PointHash> map_type;
+    using map_type = typename std::unordered_multimap<Vec2crd, ValueType, PointHash>;
     PointAccessor m_point_accessor;
     map_type m_map;
     coord_t  m_search_radius;
@@ -439,11 +439,11 @@ inline Point   align_to_grid(Point   coord, Point   spacing, Point   base)
 #include <boost/polygon/polygon.hpp>
 namespace boost { namespace polygon {
     template <>
-    struct geometry_concept<Slic3r::Point> { typedef point_concept type; };
+    struct geometry_concept<Slic3r::Point> { using type = point_concept; };
    
     template <>
     struct point_traits<Slic3r::Point> {
-        typedef coord_t coordinate_type;
+        using coordinate_type = coord_t;
     
         static inline coordinate_type get(const Slic3r::Point& point, orientation_2d orient) {
             return static_cast<coordinate_type>(point((orient == HORIZONTAL) ? 0 : 1));
@@ -452,7 +452,7 @@ namespace boost { namespace polygon {
     
     template <>
     struct point_mutable_traits<Slic3r::Point> {
-        typedef coord_t coordinate_type;
+        using coordinate_type = coord_t;
         static inline void set(Slic3r::Point& point, orientation_2d orient, coord_t value) {
             point((orient == HORIZONTAL) ? 0 : 1) = value;
         }

src/libslic3r/Polygon.hpp

@@ -72,6 +72,9 @@ public:
     // Projection of a point onto the polygon.
     Point point_projection(const Point &point) const;
     std::vector<float> parameter_by_length() const;
+
+    using iterator = Points::iterator;
+    using const_iterator = Points::const_iterator;
 };
 
 inline bool operator==(const Polygon &lhs, const Polygon &rhs) { return lhs.points == rhs.points; }
@@ -90,6 +93,8 @@ inline double total_length(const Polygons &polylines) {
     return total;
 }
 
+inline double area(const Polygon &poly) { return poly.area(); }
+
 inline double area(const Polygons &polys)
 {
     double s = 0.;

src/libslic3r/Preset.cpp

@@ -296,6 +296,13 @@ void Preset::normalize(DynamicPrintConfig &config)
         if (auto *gap_fill_enabled = config.option<ConfigOptionBool>("gap_fill_enabled", false); gap_fill_enabled)
             gap_fill_enabled->value = false;
     }
+    if (auto *first_layer_height = config.option<ConfigOptionFloatOrPercent>("first_layer_height", false); first_layer_height && first_layer_height->percent)
+        if (const auto *layer_height = config.option<ConfigOptionFloat>("layer_height", false); layer_height) {
+            // Legacy conversion - first_layer_height moved from PrintObject setting to a Print setting, thus we are getting rid of the dependency
+            // of first_layer_height on PrintObject specific layer_height. Covert the first layer heigth to an absolute value.
+            first_layer_height->value   = first_layer_height->get_abs_value(layer_height->value);
+            first_layer_height->percent = false;
+        }
 }
 
 std::string Preset::remove_invalid_keys(DynamicPrintConfig &config, const DynamicPrintConfig &default_config)

src/libslic3r/Print.cpp

@@ -1464,7 +1464,8 @@ std::string Print::validate(std::string* warning) const
             }
 
             // validate first_layer_height
-            double first_layer_height = object->config().get_abs_value("first_layer_height");
+            assert(! m_config.first_layer_height.percent);
+            double first_layer_height = m_config.first_layer_height.value;
             double first_layer_min_nozzle_diameter;
             if (object->has_raft()) {
                 // if we have raft layers, only support material extruder is used on first layer
@@ -1561,9 +1562,8 @@ BoundingBox Print::total_bounding_box() const
 
 double Print::skirt_first_layer_height() const
 {
-    if (m_objects.empty()) 
+    assert(! m_config.first_layer_height.percent);
-        throw Slic3r::InvalidArgument("skirt_first_layer_height() can't be called without PrintObjects");
+    return m_config.first_layer_height.value;
-    return m_objects.front()->config().get_abs_value("first_layer_height");
 }
 
 Flow Print::brim_flow() const

src/libslic3r/PrintConfig.cpp

@@ -995,10 +995,8 @@ void PrintConfigDef::init_fff_params()
     def->label = L("First layer height");
     def->category = L("Layers and Perimeters");
     def->tooltip = L("When printing with very low layer heights, you might still want to print a thicker "
-                   "bottom layer to improve adhesion and tolerance for non perfect build plates. "
+                   "bottom layer to improve adhesion and tolerance for non perfect build plates.");
-                   "This can be expressed as an absolute value or as a percentage (for example: 150%) "
+    def->sidetext = L("mm");
-                   "over the default layer height.");
-    def->sidetext = L("mm or %");
     def->ratio_over = "layer_height";
     def->set_default_value(new ConfigOptionFloatOrPercent(0.35, false));
 
@@ -3610,7 +3608,7 @@ std::string DynamicPrintConfig::validate()
         FullPrintConfig fpc;
         fpc.apply(*this, true);
         // Verify this print options through the FullPrintConfig.
-        return fpc.validate();
+        return Slic3r::validate(fpc);
     }
     default:
         //FIXME no validation on SLA data?
@@ -3619,135 +3617,135 @@ std::string DynamicPrintConfig::validate()
 }
 
 //FIXME localize this function.
-std::string FullPrintConfig::validate()
+std::string validate(const FullPrintConfig &cfg)
 {
     // --layer-height
-    if (this->get_abs_value("layer_height") <= 0)
+    if (cfg.get_abs_value("layer_height") <= 0)
         return "Invalid value for --layer-height";
-    if (fabs(fmod(this->get_abs_value("layer_height"), SCALING_FACTOR)) > 1e-4)
+    if (fabs(fmod(cfg.get_abs_value("layer_height"), SCALING_FACTOR)) > 1e-4)
         return "--layer-height must be a multiple of print resolution";
 
     // --first-layer-height
-    if (this->get_abs_value("first_layer_height") <= 0)
+    if (cfg.first_layer_height.value <= 0)
         return "Invalid value for --first-layer-height";
 
     // --filament-diameter
-    for (double fd : this->filament_diameter.values)
+    for (double fd : cfg.filament_diameter.values)
         if (fd < 1)
             return "Invalid value for --filament-diameter";
 
     // --nozzle-diameter
-    for (double nd : this->nozzle_diameter.values)
+    for (double nd : cfg.nozzle_diameter.values)
         if (nd < 0.005)
             return "Invalid value for --nozzle-diameter";
 
     // --perimeters
-    if (this->perimeters.value < 0)
+    if (cfg.perimeters.value < 0)
         return "Invalid value for --perimeters";
 
     // --solid-layers
-    if (this->top_solid_layers < 0)
+    if (cfg.top_solid_layers < 0)
         return "Invalid value for --top-solid-layers";
-    if (this->bottom_solid_layers < 0)
+    if (cfg.bottom_solid_layers < 0)
         return "Invalid value for --bottom-solid-layers";
 
-    if (this->use_firmware_retraction.value &&
+    if (cfg.use_firmware_retraction.value &&
-        this->gcode_flavor.value != gcfSmoothie &&
+        cfg.gcode_flavor.value != gcfSmoothie &&
-        this->gcode_flavor.value != gcfRepRapSprinter &&
+        cfg.gcode_flavor.value != gcfRepRapSprinter &&
-        this->gcode_flavor.value != gcfRepRapFirmware &&
+        cfg.gcode_flavor.value != gcfRepRapFirmware &&
-        this->gcode_flavor.value != gcfMarlinLegacy &&
+        cfg.gcode_flavor.value != gcfMarlinLegacy &&
-        this->gcode_flavor.value != gcfMarlinFirmware &&
+        cfg.gcode_flavor.value != gcfMarlinFirmware &&
-        this->gcode_flavor.value != gcfMachinekit &&
+        cfg.gcode_flavor.value != gcfMachinekit &&
-        this->gcode_flavor.value != gcfRepetier)
+        cfg.gcode_flavor.value != gcfRepetier)
         return "--use-firmware-retraction is only supported by Marlin, Smoothie, RepRapFirmware, Repetier and Machinekit firmware";
 
-    if (this->use_firmware_retraction.value)
+    if (cfg.use_firmware_retraction.value)
-        for (unsigned char wipe : this->wipe.values)
+        for (unsigned char wipe : cfg.wipe.values)
              if (wipe)
                 return "--use-firmware-retraction is not compatible with --wipe";
 
     // --gcode-flavor
-    if (! print_config_def.get("gcode_flavor")->has_enum_value(this->gcode_flavor.serialize()))
+    if (! print_config_def.get("gcode_flavor")->has_enum_value(cfg.gcode_flavor.serialize()))
         return "Invalid value for --gcode-flavor";
 
     // --fill-pattern
-    if (! print_config_def.get("fill_pattern")->has_enum_value(this->fill_pattern.serialize()))
+    if (! print_config_def.get("fill_pattern")->has_enum_value(cfg.fill_pattern.serialize()))
         return "Invalid value for --fill-pattern";
 
     // --top-fill-pattern
-    if (! print_config_def.get("top_fill_pattern")->has_enum_value(this->top_fill_pattern.serialize()))
+    if (! print_config_def.get("top_fill_pattern")->has_enum_value(cfg.top_fill_pattern.serialize()))
         return "Invalid value for --top-fill-pattern";
 
     // --bottom-fill-pattern
-    if (! print_config_def.get("bottom_fill_pattern")->has_enum_value(this->bottom_fill_pattern.serialize()))
+    if (! print_config_def.get("bottom_fill_pattern")->has_enum_value(cfg.bottom_fill_pattern.serialize()))
         return "Invalid value for --bottom-fill-pattern";
 
     // --fill-density
-    if (fabs(this->fill_density.value - 100.) < EPSILON &&
+    if (fabs(cfg.fill_density.value - 100.) < EPSILON &&
-        ! print_config_def.get("top_fill_pattern")->has_enum_value(this->fill_pattern.serialize()))
+        ! print_config_def.get("top_fill_pattern")->has_enum_value(cfg.fill_pattern.serialize()))
         return "The selected fill pattern is not supposed to work at 100% density";
 
     // --infill-every-layers
-    if (this->infill_every_layers < 1)
+    if (cfg.infill_every_layers < 1)
         return "Invalid value for --infill-every-layers";
 
     // --skirt-height
-    if (this->skirt_height < 0)
+    if (cfg.skirt_height < 0)
         return "Invalid value for --skirt-height";
 
     // --bridge-flow-ratio
-    if (this->bridge_flow_ratio <= 0)
+    if (cfg.bridge_flow_ratio <= 0)
         return "Invalid value for --bridge-flow-ratio";
 
     // extruder clearance
-    if (this->extruder_clearance_radius <= 0)
+    if (cfg.extruder_clearance_radius <= 0)
         return "Invalid value for --extruder-clearance-radius";
-    if (this->extruder_clearance_height <= 0)
+    if (cfg.extruder_clearance_height <= 0)
         return "Invalid value for --extruder-clearance-height";
 
     // --extrusion-multiplier
-    for (double em : this->extrusion_multiplier.values)
+    for (double em : cfg.extrusion_multiplier.values)
         if (em <= 0)
             return "Invalid value for --extrusion-multiplier";
 
     // --default-acceleration
-    if ((this->perimeter_acceleration != 0. || this->infill_acceleration != 0. || this->bridge_acceleration != 0. || this->first_layer_acceleration != 0.) &&
+    if ((cfg.perimeter_acceleration != 0. || cfg.infill_acceleration != 0. || cfg.bridge_acceleration != 0. || cfg.first_layer_acceleration != 0.) &&
-        this->default_acceleration == 0.)
+        cfg.default_acceleration == 0.)
         return "Invalid zero value for --default-acceleration when using other acceleration settings";
 
     // --spiral-vase
-    if (this->spiral_vase) {
+    if (cfg.spiral_vase) {
         // Note that we might want to have more than one perimeter on the bottom
         // solid layers.
-        if (this->perimeters > 1)
+        if (cfg.perimeters > 1)
             return "Can't make more than one perimeter when spiral vase mode is enabled";
-        else if (this->perimeters < 1)
+        else if (cfg.perimeters < 1)
             return "Can't make less than one perimeter when spiral vase mode is enabled";
-        if (this->fill_density > 0)
+        if (cfg.fill_density > 0)
             return "Spiral vase mode can only print hollow objects, so you need to set Fill density to 0";
-        if (this->top_solid_layers > 0)
+        if (cfg.top_solid_layers > 0)
             return "Spiral vase mode is not compatible with top solid layers";
-        if (this->support_material || this->support_material_enforce_layers > 0)
+        if (cfg.support_material || cfg.support_material_enforce_layers > 0)
             return "Spiral vase mode is not compatible with support material";
     }
 
     // extrusion widths
     {
         double max_nozzle_diameter = 0.;
-        for (double dmr : this->nozzle_diameter.values)
+        for (double dmr : cfg.nozzle_diameter.values)
             max_nozzle_diameter = std::max(max_nozzle_diameter, dmr);
         const char *widths[] = { "external_perimeter", "perimeter", "infill", "solid_infill", "top_infill", "support_material", "first_layer" };
         for (size_t i = 0; i < sizeof(widths) / sizeof(widths[i]); ++ i) {
             std::string key(widths[i]);
             key += "_extrusion_width";
-            if (this->get_abs_value(key, max_nozzle_diameter) > 10. * max_nozzle_diameter)
+            if (cfg.get_abs_value(key, max_nozzle_diameter) > 10. * max_nozzle_diameter)
                 return std::string("Invalid extrusion width (too large): ") + key;
         }
     }
 
     // Out of range validation of numeric values.
-    for (const std::string &opt_key : this->keys()) {
+    for (const std::string &opt_key : cfg.keys()) {
-        const ConfigOption      *opt    = this->optptr(opt_key);
+        const ConfigOption      *opt    = cfg.optptr(opt_key);
         assert(opt != nullptr);
         const ConfigOptionDef   *optdef = print_config_def.get(opt_key);
         assert(optdef != nullptr);

src/libslic3r/PrintObject.cpp

@@ -2207,6 +2207,7 @@ std::vector<ExPolygons> PrintObject::slice_volumes(
             TriangleMesh vol_mesh(model_volume.mesh());
             vol_mesh.transform(model_volume.get_matrix(), true);
             mesh.merge(vol_mesh);
+            mesh.repair(false);
         }
         if (mesh.stl.stats.number_of_facets > 0) {
             mesh.transform(m_trafo, true);

src/libslic3r/SLA/AGGRaster.hpp

@@ -4,7 +4,6 @@
 #include <libslic3r/SLA/RasterBase.hpp>
 #include "libslic3r/ExPolygon.hpp"
 #include "libslic3r/MTUtils.hpp"
-#include <libnest2d/backends/clipper/clipper_polygon.hpp>
 
 // For rasterizing
 #include <agg/agg_basics.h>
@@ -21,10 +20,7 @@
 namespace Slic3r {
 
 inline const Polygon& contour(const ExPolygon& p) { return p.contour; }
-inline const ClipperLib::Path& contour(const ClipperLib::Polygon& p) { return p.Contour; }
-
 inline const Polygons& holes(const ExPolygon& p) { return p.holes; }
-inline const ClipperLib::Paths& holes(const ClipperLib::Polygon& p) { return p.Holes; }
 
 namespace sla {
 
@@ -77,8 +73,6 @@ protected:
     double getPx(const Point &p) { return p(0) * m_pxdim_scaled.w_mm; }
     double getPy(const Point &p) { return p(1) * m_pxdim_scaled.h_mm; }
     agg::path_storage to_path(const Polygon &poly) { return to_path(poly.points); }
-    double getPx(const ClipperLib::IntPoint &p) { return p.X * m_pxdim_scaled.w_mm; }
-    double getPy(const ClipperLib::IntPoint& p) { return p.Y * m_pxdim_scaled.h_mm; }
     
     template<class PointVec> agg::path_storage _to_path(const PointVec& v)
     {
@@ -168,7 +162,6 @@ public:
     }
     
     void draw(const ExPolygon &poly) override { _draw(poly); }
-    void draw(const ClipperLib::Polygon &poly) override { _draw(poly); }
     
     EncodedRaster encode(RasterEncoder encoder) const override
     {

src/libslic3r/SLA/RasterBase.hpp

@@ -11,8 +11,6 @@
 #include <libslic3r/ExPolygon.hpp>
 #include <libslic3r/SLA/Concurrency.hpp>
 
-namespace ClipperLib { struct Polygon; }
-
 namespace Slic3r {
 
 template<class T> using uqptr = std::unique_ptr<T>;
@@ -92,7 +90,6 @@ public:
     
     /// Draw a polygon with holes.
     virtual void draw(const ExPolygon& poly) = 0;
-    virtual void draw(const ClipperLib::Polygon& poly) = 0;
     
     /// Get the resolution of the raster.
     virtual Resolution resolution() const = 0;

src/libslic3r/SLA/SupportPointGenerator.cpp

@@ -12,11 +12,9 @@
 #include "ClipperUtils.hpp"
 #include "Tesselate.hpp"
 #include "ExPolygonCollection.hpp"
+#include "MinAreaBoundingBox.hpp"
 #include "libslic3r.h"
 
-#include "libnest2d/backends/clipper/geometries.hpp"
-#include "libnest2d/utils/rotcalipers.hpp"
-
 #include <iostream>
 #include <random>
 
@@ -400,7 +398,7 @@ std::vector<Vec2f> sample_expolygon(const ExPolygons &expolys, float samples_per
 void sample_expolygon_boundary(const ExPolygon &   expoly,
                                float               samples_per_mm,
                                std::vector<Vec2f> &out,
-                               std::mt19937 &      rng)
+                               std::mt19937 &      /*rng*/)
 {
     double  point_stepping_scaled = scale_(1.f) / samples_per_mm;
     for (size_t i_contour = 0; i_contour <= expoly.holes.size(); ++ i_contour) {
@@ -553,9 +551,8 @@ void SupportPointGenerator::uniformly_cover(const ExPolygons& islands, Structure
 //    auto bb = get_extents(islands);
 
     if (flags & icfIsNew) {
-        auto chull_ex = ExPolygonCollection{islands}.convex_hull();
+        auto chull = ExPolygonCollection{islands}.convex_hull();
-        auto chull = Slic3rMultiPoint_to_ClipperPath(chull_ex);
+        auto rotbox = MinAreaBoundigBox{chull, MinAreaBoundigBox::pcConvex};
-        auto rotbox = libnest2d::minAreaBoundingBox(chull);
         Vec2d bbdim = {unscaled(rotbox.width()), unscaled(rotbox.height())};
 
         if (bbdim.x() > bbdim.y()) std::swap(bbdim.x(), bbdim.y());

src/libslic3r/SLAPrint.hpp

@@ -9,7 +9,6 @@
 #include "Point.hpp"
 #include "MTUtils.hpp"
 #include "Zipper.hpp"
-#include <libnest2d/backends/clipper/clipper_polygon.hpp>
 
 namespace Slic3r {
 
@@ -483,7 +482,7 @@ public:
         // The collection of slice records for the current level.
         std::vector<std::reference_wrapper<const SliceRecord>> m_slices;
 
-        std::vector<ClipperLib::Polygon> m_transformed_slices;
+        ExPolygons m_transformed_slices;
 
         template<class Container> void transformed_slices(Container&& c)
         {
@@ -507,7 +506,7 @@ public:
 
         auto slices() const -> const decltype (m_slices)& { return m_slices; }
 
-        const std::vector<ClipperLib::Polygon> & transformed_slices() const {
+        const ExPolygons & transformed_slices() const {
             return m_transformed_slices;
         }
     };

src/libslic3r/SLAPrintSteps.cpp

@@ -16,9 +16,6 @@
 
 #include <libslic3r/ClipperUtils.hpp>
 
-// For geometry algorithms with native Clipper types (no copies and conversions)
-#include <libnest2d/backends/clipper/geometries.hpp>
-
 #include <boost/log/trivial.hpp>
 
 #include "I18N.hpp"
@@ -717,55 +714,49 @@ void SLAPrint::Steps::slice_supports(SLAPrintObject &po) {
     report_status(-2, "", SlicingStatus::RELOAD_SLA_PREVIEW);
 }
 
-using ClipperPoint  = ClipperLib::IntPoint;
+//static ClipperPolygons polyunion(const ClipperPolygons &subjects)
-using ClipperPolygon = ClipperLib::Polygon; // see clipper_polygon.hpp in libnest2d
+//{
-using ClipperPolygons = std::vector<ClipperPolygon>;
+//    ClipperLib::Clipper clipper;
 
-static ClipperPolygons polyunion(const ClipperPolygons &subjects)
+//    bool closed = true;
-{
-    ClipperLib::Clipper clipper;
 
-    bool closed = true;
+//    for(auto& path : subjects) {
+//        clipper.AddPath(path.Contour, ClipperLib::ptSubject, closed);
+//        clipper.AddPaths(path.Holes, ClipperLib::ptSubject, closed);
+//    }
 
-    for(auto& path : subjects) {
+//    auto mode = ClipperLib::pftPositive;
-        clipper.AddPath(path.Contour, ClipperLib::ptSubject, closed);
-        clipper.AddPaths(path.Holes, ClipperLib::ptSubject, closed);
-    }
 
-    auto mode = ClipperLib::pftPositive;
+//    return libnest2d::clipper_execute(clipper, ClipperLib::ctUnion, mode, mode);
+//}
 
-    return libnest2d::clipper_execute(clipper, ClipperLib::ctUnion, mode, mode);
+//static ClipperPolygons polydiff(const ClipperPolygons &subjects, const ClipperPolygons& clips)
-}
+//{
+//    ClipperLib::Clipper clipper;
 
-static ClipperPolygons polydiff(const ClipperPolygons &subjects, const ClipperPolygons& clips)
+//    bool closed = true;
-{
-    ClipperLib::Clipper clipper;
 
-    bool closed = true;
+//    for(auto& path : subjects) {
+//        clipper.AddPath(path.Contour, ClipperLib::ptSubject, closed);
+//        clipper.AddPaths(path.Holes, ClipperLib::ptSubject, closed);
+//    }
 
-    for(auto& path : subjects) {
+//    for(auto& path : clips) {
-        clipper.AddPath(path.Contour, ClipperLib::ptSubject, closed);
+//        clipper.AddPath(path.Contour, ClipperLib::ptClip, closed);
-        clipper.AddPaths(path.Holes, ClipperLib::ptSubject, closed);
+//        clipper.AddPaths(path.Holes, ClipperLib::ptClip, closed);
-    }
+//    }
 
-    for(auto& path : clips) {
+//    auto mode = ClipperLib::pftPositive;
-        clipper.AddPath(path.Contour, ClipperLib::ptClip, closed);
-        clipper.AddPaths(path.Holes, ClipperLib::ptClip, closed);
-    }
 
-    auto mode = ClipperLib::pftPositive;
+//    return libnest2d::clipper_execute(clipper, ClipperLib::ctDifference, mode, mode);
-
+//}
-    return libnest2d::clipper_execute(clipper, ClipperLib::ctDifference, mode, mode);
-}
 
 // get polygons for all instances in the object
-static ClipperPolygons get_all_polygons(const SliceRecord& record, SliceOrigin o)
+static ExPolygons get_all_polygons(const SliceRecord& record, SliceOrigin o)
 {
-    namespace sl = libnest2d::sl;
-
     if (!record.print_obj()) return {};
 
-    ClipperPolygons polygons;
+    ExPolygons polygons;
     auto &input_polygons = record.get_slice(o);
     auto &instances = record.print_obj()->instances();
     bool is_lefthanded = record.print_obj()->is_left_handed();
@@ -776,43 +767,42 @@ static ClipperPolygons get_all_polygons(const SliceRecord& record, SliceOrigin o
 
         for (size_t i = 0; i < instances.size(); ++i)
         {
-            ClipperPolygon poly;
+            ExPolygon poly;
 
             // We need to reverse if is_lefthanded is true but
             bool needreverse = is_lefthanded;
 
             // should be a move
-            poly.Contour.reserve(polygon.contour.size() + 1);
+            poly.contour.points.reserve(polygon.contour.size() + 1);
 
             auto& cntr = polygon.contour.points;
             if(needreverse)
                 for(auto it = cntr.rbegin(); it != cntr.rend(); ++it)
-                    poly.Contour.emplace_back(it->x(), it->y());
+                    poly.contour.points.emplace_back(it->x(), it->y());
             else
                 for(auto& p : cntr)
-                    poly.Contour.emplace_back(p.x(), p.y());
+                    poly.contour.points.emplace_back(p.x(), p.y());
 
             for(auto& h : polygon.holes) {
-                poly.Holes.emplace_back();
+                poly.holes.emplace_back();
-                auto& hole = poly.Holes.back();
+                auto& hole = poly.holes.back();
-                hole.reserve(h.points.size() + 1);
+                hole.points.reserve(h.points.size() + 1);
 
                 if(needreverse)
                     for(auto it = h.points.rbegin(); it != h.points.rend(); ++it)
-                        hole.emplace_back(it->x(), it->y());
+                        hole.points.emplace_back(it->x(), it->y());
                 else
                     for(auto& p : h.points)
-                        hole.emplace_back(p.x(), p.y());
+                        hole.points.emplace_back(p.x(), p.y());
             }
 
             if(is_lefthanded) {
-                for(auto& p : poly.Contour) p.X = -p.X;
+                for(auto& p : poly.contour) p.x() = -p.x();
-                for(auto& h : poly.Holes) for(auto& p : h) p.X = -p.X;
+                for(auto& h : poly.holes) for(auto& p : h) p.x() = -p.x();
             }
 
-            sl::rotate(poly, double(instances[i].rotation));
+            poly.rotate(double(instances[i].rotation));
-            sl::translate(poly, ClipperPoint{instances[i].shift.x(),
+            poly.translate(Point{instances[i].shift.x(), instances[i].shift.y()});
-                                             instances[i].shift.y()});
 
             polygons.emplace_back(std::move(poly));
         }
@@ -878,9 +868,6 @@ void SLAPrint::Steps::merge_slices_and_eval_stats() {
 
     print_statistics.clear();
 
-    // libnest calculates positive area for clockwise polygons, Slic3r is in counter-clockwise
-    auto areafn = [](const ClipperPolygon& poly) { return - libnest2d::sl::area(poly); };
-
     const double area_fill = printer_config.area_fill.getFloat()*0.01;// 0.5 (50%);
     const double fast_tilt = printer_config.fast_tilt_time.getFloat();// 5.0;
     const double slow_tilt = printer_config.slow_tilt_time.getFloat();// 8.0;
@@ -913,7 +900,7 @@ void SLAPrint::Steps::merge_slices_and_eval_stats() {
     // Going to parallel:
     auto printlayerfn = [this,
             // functions and read only vars
-            areafn, area_fill, display_area, exp_time, init_exp_time, fast_tilt, slow_tilt, delta_fade_time,
+            area_fill, display_area, exp_time, init_exp_time, fast_tilt, slow_tilt, delta_fade_time,
 
             // write vars
             &mutex, &models_volume, &supports_volume, &estim_time, &slow_layers,
@@ -931,8 +918,8 @@ void SLAPrint::Steps::merge_slices_and_eval_stats() {
 
         // Calculation of the consumed material
 
-        ClipperPolygons model_polygons;
+        ExPolygons model_polygons;
-        ClipperPolygons supports_polygons;
+        ExPolygons supports_polygons;
 
         size_t c = std::accumulate(layer.slices().begin(),
                                    layer.slices().end(),
@@ -954,44 +941,44 @@ void SLAPrint::Steps::merge_slices_and_eval_stats() {
 
         for(const SliceRecord& record : layer.slices()) {
 
-            ClipperPolygons modelslices = get_all_polygons(record, soModel);
+            ExPolygons modelslices = get_all_polygons(record, soModel);
-            for(ClipperPolygon& p_tmp : modelslices) model_polygons.emplace_back(std::move(p_tmp));
+            for(ExPolygon& p_tmp : modelslices) model_polygons.emplace_back(std::move(p_tmp));
 
-            ClipperPolygons supportslices = get_all_polygons(record, soSupport);
+            ExPolygons supportslices = get_all_polygons(record, soSupport);
-            for(ClipperPolygon& p_tmp : supportslices) supports_polygons.emplace_back(std::move(p_tmp));
+            for(ExPolygon& p_tmp : supportslices) supports_polygons.emplace_back(std::move(p_tmp));
 
         }
 
-        model_polygons = polyunion(model_polygons);
+        model_polygons = union_ex(model_polygons);
         double layer_model_area = 0;
-        for (const ClipperPolygon& polygon : model_polygons)
+        for (const ExPolygon& polygon : model_polygons)
-            layer_model_area += areafn(polygon);
+            layer_model_area += area(polygon);
 
         if (layer_model_area < 0 || layer_model_area > 0) {
             Lock lck(mutex); models_volume += layer_model_area * l_height;
         }
 
         if(!supports_polygons.empty()) {
-            if(model_polygons.empty()) supports_polygons = polyunion(supports_polygons);
+            if(model_polygons.empty()) supports_polygons = union_ex(supports_polygons);
-            else supports_polygons = polydiff(supports_polygons, model_polygons);
+            else supports_polygons = diff_ex(supports_polygons, model_polygons);
             // allegedly, union of subject is done withing the diff according to the pftPositive polyFillType
         }
 
         double layer_support_area = 0;
-        for (const ClipperPolygon& polygon : supports_polygons)
+        for (const ExPolygon& polygon : supports_polygons)
-            layer_support_area += areafn(polygon);
+            layer_support_area += area(polygon);
 
         if (layer_support_area < 0 || layer_support_area > 0) {
             Lock lck(mutex); supports_volume += layer_support_area * l_height;
         }
 
         // Here we can save the expensively calculated polygons for printing
-        ClipperPolygons trslices;
+        ExPolygons trslices;
         trslices.reserve(model_polygons.size() + supports_polygons.size());
-        for(ClipperPolygon& poly : model_polygons) trslices.emplace_back(std::move(poly));
+        for(ExPolygon& poly : model_polygons) trslices.emplace_back(std::move(poly));
-        for(ClipperPolygon& poly : supports_polygons) trslices.emplace_back(std::move(poly));
+        for(ExPolygon& poly : supports_polygons) trslices.emplace_back(std::move(poly));
 
-        layer.transformed_slices(polyunion(trslices));
+        layer.transformed_slices(union_ex(trslices));
 
         // Calculation of the slow and fast layers to the future controlling those values on FW
 
@@ -1074,7 +1061,7 @@ void SLAPrint::Steps::rasterize()
         PrintLayer& printlayer = m_print->m_printer_input[idx];
         if(canceled()) return;
 
-        for (const ClipperLib::Polygon& poly : printlayer.transformed_slices())
+        for (const ExPolygon& poly : printlayer.transformed_slices())
             raster.draw(poly);
 
         // Status indication guarded with the spinlock

src/libslic3r/SVG.cpp

@@ -273,8 +273,8 @@ std::string SVG::get_path_d(const ClipperLib::Path &path, double scale, bool clo
     std::ostringstream d;
     d << "M ";
     for (ClipperLib::Path::const_iterator p = path.begin(); p != path.end(); ++p) {
-        d << to_svg_x(scale * p->X - origin(0)) << " ";
+        d << to_svg_x(scale * p->x() - origin(0)) << " ";
-        d << to_svg_y(scale * p->Y - origin(1)) << " ";
+        d << to_svg_y(scale * p->y() - origin(1)) << " ";
     }
     if (closed) d << "z";
     return d.str();

src/libslic3r/Slicing.cpp

@@ -64,9 +64,9 @@ SlicingParameters SlicingParameters::create_from_config(
 	coordf_t				 object_height,
 	const std::vector<unsigned int> &object_extruders)
 {
-    coordf_t first_layer_height                      = (object_config.first_layer_height.value <= 0) ? 
+    assert(! print_config.first_layer_height.percent);
-        object_config.layer_height.value : 
+    coordf_t first_layer_height                      = (print_config.first_layer_height.value <= 0) ? 
-        object_config.first_layer_height.get_abs_value(object_config.layer_height.value);
+        object_config.layer_height.value : print_config.first_layer_height.value;
     // If object_config.support_material_extruder == 0 resp. object_config.support_material_interface_extruder == 0,
     // print_config.nozzle_diameter.get_at(size_t(-1)) returns the 0th nozzle diameter,
     // which is consistent with the requirement that if support_material_extruder == 0 resp. support_material_interface_extruder == 0,

src/libslic3r/Technologies.hpp

@@ -59,6 +59,8 @@
 #define ENABLE_EXTENDED_M73_LINES (1 && ENABLE_VALIDATE_CUSTOM_GCODE)
 // Enable a modified version of automatic downscale on load of objects too big
 #define ENABLE_MODIFIED_DOWNSCALE_ON_LOAD_OBJECTS_TOO_BIG (1 && ENABLE_2_4_0_ALPHA0)
+// Enable visualization of start gcode as regular toolpaths
+#define ENABLE_START_GCODE_VISUALIZATION (1 && ENABLE_2_4_0_ALPHA0)
 // Enable visualization of seams in preview
 #define ENABLE_SEAMS_VISUALIZATION (1 && ENABLE_2_4_0_ALPHA0)
 

src/libslic3r/TriangleMesh.cpp

@@ -357,10 +357,14 @@ void TriangleMesh::transform(const Transform3d& t, bool fix_left_handed)
     its_transform(its, t);
 	if (fix_left_handed && t.matrix().block(0, 0, 3, 3).determinant() < 0.) {
 		// Left handed transformation is being applied. It is a good idea to flip the faces and their normals.
-		this->repair(false);
+        // As for the assert: the repair function would fix the normals, reversing would
-		stl_reverse_all_facets(&stl);
+        // break them again. The caller should provide a mesh that does not need repair.
-		this->its.clear();
+        // The repair call is left here so things don't break more than they were.
-		this->require_shared_vertices();
+        assert(this->repaired);
+        this->repair(false);
+        stl_reverse_all_facets(&stl);
+        this->its.clear();
+        this->require_shared_vertices();
 	}
 }
 
@@ -369,11 +373,12 @@ void TriangleMesh::transform(const Matrix3d& m, bool fix_left_handed)
     stl_transform(&stl, m);
     its_transform(its, m);
     if (fix_left_handed && m.determinant() < 0.) {
-        // Left handed transformation is being applied. It is a good idea to flip the faces and their normals.
+        // See comments in function above.
+        assert(this->repaired);
         this->repair(false);
         stl_reverse_all_facets(&stl);
-		this->its.clear();
+        this->its.clear();
-		this->require_shared_vertices();
+        this->require_shared_vertices();
     }
 }
 

src/libslic3r/clipper.cpp

@@ -0,0 +1,13 @@
+// Hackish wrapper around the ClipperLib library to compile the Clipper library using Slic3r::Point.
+
+#include "clipper.hpp"
+
+// Don't include <clipper/clipper.hpp> for the second time.
+#define clipper_hpp
+
+// Override ClipperLib namespace to Slic3r::ClipperLib
+#define CLIPPERLIB_NAMESPACE_PREFIX	Slic3r
+// Override Slic3r::ClipperLib::IntPoint to Slic3r::Point
+#define CLIPPERLIB_INTPOINT_TYPE    Slic3r::Point
+
+#include <clipper/clipper.cpp>

src/libslic3r/clipper.hpp

@@ -0,0 +1,26 @@
+// Hackish wrapper around the ClipperLib library to compile the Clipper library using Slic3r's own Point type.
+
+#ifndef slic3r_clipper_hpp
+
+#ifdef clipper_hpp
+#error "You should include the libslic3r/clipper.hpp before clipper/clipper.hpp"
+#endif
+
+#ifdef CLIPPERLIB_USE_XYZ
+#error "Something went wrong. Using clipper.hpp with Slic3r Point type, but CLIPPERLIB_USE_XYZ is defined."
+#endif
+
+#define slic3r_clipper_hpp
+
+#include "Point.hpp"
+
+#define CLIPPERLIB_NAMESPACE_PREFIX		Slic3r
+#define CLIPPERLIB_INTPOINT_TYPE    	Slic3r::Point
+
+#include <clipper/clipper.hpp>
+
+#undef clipper_hpp
+#undef CLIPPERLIB_NAMESPACE_PREFIX
+#undef CLIPPERLIB_INTPOINT_TYPE
+
+#endif // slic3r_clipper_hpp

src/libslic3r/libslic3r.h

@@ -308,6 +308,10 @@ IntegerOnly<I, std::vector<T, Args...>> reserve_vector(I capacity)
     return ret;
 }
 
+// Borrowed from C++20
+template<class T>
+using remove_cvref_t = std::remove_cv_t<std::remove_reference_t<T>>;
+
 } // namespace Slic3r
 
 #endif

src/libslic3r/pchheader.hpp

@@ -114,7 +114,7 @@
 #include <cereal/types/base_class.hpp>
 
 #include <clipper/clipper_z.hpp>
-#include <clipper/clipper.hpp>
+#include "clipper.hpp"
 #include "BoundingBox.hpp"
 #include "ClipperUtils.hpp"
 #include "Config.hpp"
@@ -129,8 +129,6 @@
 #include "libslic3r.h"
 #include "libslic3r_version.h"
 
-#include "clipper.hpp"
-
 #include <Shiny/Shiny.h>
 
 #include <admesh/stl.h>

src/slic3r/GUI/ConfigManipulation.cpp

@@ -45,7 +45,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con
     // layer_height shouldn't be equal to zero
     if (config->opt_float("layer_height") < EPSILON)
     {
-        const wxString msg_text = _(L("Zero layer height is not valid.\n\nThe layer height will be reset to 0.01."));
+        const wxString msg_text = _(L("Layer height is not valid.\n\nThe layer height will be reset to 0.01."));
         wxMessageDialog dialog(nullptr, msg_text, _(L("Layer height")), wxICON_WARNING | wxOK);
         DynamicPrintConfig new_conf = *config;
         is_msg_dlg_already_exist = true;
@@ -55,9 +55,9 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con
         is_msg_dlg_already_exist = false;
     }
 
-    if (fabs(config->option<ConfigOptionFloatOrPercent>("first_layer_height")->value - 0) < EPSILON)
+    if (config->option<ConfigOptionFloatOrPercent>("first_layer_height")->value < EPSILON)
     {
-        const wxString msg_text = _(L("Zero first layer height is not valid.\n\nThe first layer height will be reset to 0.01."));
+        const wxString msg_text = _(L("First layer height is not valid.\n\nThe first layer height will be reset to 0.01."));
         wxMessageDialog dialog(nullptr, msg_text, _(L("First layer height")), wxICON_WARNING | wxOK);
         DynamicPrintConfig new_conf = *config;
         is_msg_dlg_already_exist = true;

src/slic3r/GUI/GCodeViewer.cpp

@@ -1624,13 +1624,15 @@ void GCodeViewer::load_toolpaths(const GCodeProcessor::Result& gcode_result)
 #if ENABLE_REDUCED_TOOLPATHS_SEGMENT_CAPS
             const std::array<IBufferType, 8> first_seg_v_offsets = convert_vertices_offset(vbuffer_size, { 0, 1, 2, 3, 4, 5, 6, 7 });
             const std::array<IBufferType, 8> non_first_seg_v_offsets = convert_vertices_offset(vbuffer_size, { -4, 0, -2, 1, 2, 3, 4, 5 });
-#endif // ENABLE_REDUCED_TOOLPATHS_SEGMENT_CAPS
+            bool is_first_segment = (last_path.vertices_count() == 1);
-
+            if (is_first_segment || vbuffer_size == 0) {
+#else
             if (last_path.vertices_count() == 1 || vbuffer_size == 0) {
+#endif // ENABLE_REDUCED_TOOLPATHS_SEGMENT_CAPS
                 // 1st segment or restart into a new vertex buffer
                 // ===============================================
 #if ENABLE_REDUCED_TOOLPATHS_SEGMENT_CAPS
-                if (last_path.vertices_count() == 1)
+                if (is_first_segment)
                     // starting cap triangles
                     append_starting_cap_triangles(indices, first_seg_v_offsets);
 #endif // ENABLE_REDUCED_TOOLPATHS_SEGMENT_CAPS
@@ -1708,7 +1710,7 @@ void GCodeViewer::load_toolpaths(const GCodeProcessor::Result& gcode_result)
 #if ENABLE_REDUCED_TOOLPATHS_SEGMENT_CAPS
             if (next != nullptr && (curr.type != next->type || !last_path.matches(*next)))
                 // ending cap triangles
-                append_ending_cap_triangles(indices, non_first_seg_v_offsets);
+                append_ending_cap_triangles(indices, is_first_segment ? first_seg_v_offsets : non_first_seg_v_offsets);
 #endif // ENABLE_REDUCED_TOOLPATHS_SEGMENT_CAPS
 
             last_path.sub_paths.back().last = { ibuffer_id, indices.size() - 1, move_id, curr.position };
@@ -1743,7 +1745,11 @@ void GCodeViewer::load_toolpaths(const GCodeProcessor::Result& gcode_result)
             // for the gcode viewer we need to take in account all moves to correctly size the printbed
             m_paths_bounding_box.merge(move.position.cast<double>());
         else {
+#if ENABLE_START_GCODE_VISUALIZATION
+            if (move.type == EMoveType::Extrude && move.extrusion_role != erCustom && move.width != 0.0f && move.height != 0.0f)
+#else
             if (move.type == EMoveType::Extrude && move.width != 0.0f && move.height != 0.0f)
+#endif // ENABLE_START_GCODE_VISUALIZATION
                 m_paths_bounding_box.merge(move.position.cast<double>());
         }
     }

src/slic3r/GUI/GLCanvas3D.cpp

@@ -1,7 +1,6 @@
 #include "libslic3r/libslic3r.h"
 #include "GLCanvas3D.hpp"
 
-#include "admesh/stl.h"
 #include "libslic3r/ClipperUtils.hpp"
 #include "libslic3r/PrintConfig.hpp"
 #include "libslic3r/GCode/ThumbnailData.hpp"
@@ -1682,8 +1681,10 @@ void GLCanvas3D::render()
     if (m_picking_enabled)
         m_mouse.scene_position = _mouse_to_3d(m_mouse.position.cast<coord_t>());
 
-    _render_current_gizmo();
+    // sidebar hints need to be rendered before the gizmos because the depth buffer
+    // could be invalidated by the following gizmo render methods
     _render_selection_sidebar_hints();
+    _render_current_gizmo();
 #if ENABLE_RENDER_PICKING_PASS
     }
 #endif // ENABLE_RENDER_PICKING_PASS
@@ -4998,8 +4999,9 @@ void GLCanvas3D::_render_background() const
         if (!m_volumes.empty())
             use_error_color &= _is_any_volume_outside();
         else {
-            BoundingBoxf3 test_volume = (m_config != nullptr) ? print_volume(*m_config) : BoundingBoxf3();
+            const BoundingBoxf3 test_volume = (m_config != nullptr) ? print_volume(*m_config) : BoundingBoxf3();
-            use_error_color &= (test_volume.radius() > 0.0) ? !test_volume.contains(m_gcode_viewer.get_paths_bounding_box()) : false;
+            const BoundingBoxf3& paths_volume = m_gcode_viewer.get_paths_bounding_box();
+            use_error_color &= (test_volume.radius() > 0.0 && paths_volume.radius() > 0.0) ? !test_volume.contains(paths_volume) : false;
         }
     }
 

src/slic3r/GUI/GUI_App.cpp

@@ -244,10 +244,11 @@ private:
 
             // credits infornation
             credits =   title + " " +
-                        _L("is based on Slic3r by Alessandro Ranellucci and the RepRap community.") + "\n\n" +
+                        _L("is based on Slic3r by Alessandro Ranellucci and the RepRap community.") + "\n" +
+                        _L("Developed by Prusa Research.")+ "\n\n" +
                         title + " " + _L("is licensed under the") + " " + _L("GNU Affero General Public License, version 3") + "\n\n" +
                         _L("Contributions by Vojtech Bubnik, Enrico Turri, Oleksandra Iushchenko, Tamas Meszaros, Lukas Matena, Vojtech Kral, David Kocik and numerous others.") + "\n\n" +
-                        _L("Artwork model by Nora Al-Badri and Jan Nikolai Nelles");
+                        _L("Artwork model by M Boyer");
 
             title_font = version_font = credits_font = init_font;
         }

src/slic3r/GUI/GUI_Preview.cpp

@@ -235,7 +235,7 @@ bool Preview::init(wxWindow* parent, Model* model)
         _L("Ironing") + "|1|" +
         _L("Bridge infill") + "|1|" +
         _L("Gap fill") + "|1|" +
-        _L("Skirt") + "|1|" +
+        _L("Skirt/Brim") + "|1|" +
         _L("Support material") + "|1|" +
         _L("Support material interface") + "|1|" +
         _L("Wipe tower") + "|1|" +

src/slic3r/GUI/MainFrame.cpp

@@ -1483,10 +1483,10 @@ void MainFrame::repair_stl()
         output_file = dlg.GetPath();
     }
 
-    auto tmesh = new Slic3r::TriangleMesh();
+    Slic3r::TriangleMesh tmesh;
-    tmesh->ReadSTLFile(input_file.ToUTF8().data());
+    tmesh.ReadSTLFile(input_file.ToUTF8().data());
-    tmesh->repair();
+    tmesh.repair();
-    tmesh->WriteOBJFile(output_file.ToUTF8().data());
+    tmesh.WriteOBJFile(output_file.ToUTF8().data());
     Slic3r::GUI::show_info(this, L("Your file was repaired."), L("Repair"));
 }
 

src/slic3r/GUI/Plater.cpp

@@ -5085,6 +5085,30 @@ void Plater::export_stl(bool extended, bool selection_only)
     if (selection_only && (obj_idx == -1 || selection.is_wipe_tower()))
         return;
 
+    // Following lambda generates a combined mesh for export with normals pointing outwards.
+    auto mesh_to_export = [](const ModelObject* mo, bool instances) -> TriangleMesh {
+        TriangleMesh mesh;
+        for (const ModelVolume *v : mo->volumes)
+            if (v->is_model_part()) {
+                TriangleMesh vol_mesh(v->mesh());
+                vol_mesh.repair();
+                vol_mesh.transform(v->get_matrix(), true);
+                mesh.merge(vol_mesh);
+            }
+        mesh.repair();
+        if (instances) {
+            TriangleMesh vols_mesh(mesh);
+            mesh = TriangleMesh();
+            for (const ModelInstance *i : mo->instances) {
+                TriangleMesh m = vols_mesh;
+                m.transform(i->get_matrix(), true);
+                mesh.merge(m);
+            }
+        }
+        mesh.repair();
+        return mesh;
+    };
+
     TriangleMesh mesh;
     if (p->printer_technology == ptFFF) {
         if (selection_only) {
@@ -5092,20 +5116,21 @@ void Plater::export_stl(bool extended, bool selection_only)
             if (selection.get_mode() == Selection::Instance)
             {
                 if (selection.is_single_full_object())
-                    mesh = model_object->mesh();
+                    mesh = mesh_to_export(model_object, true);
                 else
-                    mesh = model_object->full_raw_mesh();
+                    mesh = mesh_to_export(model_object, false);
             }
             else
             {
                 const GLVolume* volume = selection.get_volume(*selection.get_volume_idxs().begin());
                 mesh = model_object->volumes[volume->volume_idx()]->mesh();
-                mesh.transform(volume->get_volume_transformation().get_matrix());
+                mesh.transform(volume->get_volume_transformation().get_matrix(), true);
                 mesh.translate(-model_object->origin_translation.cast<float>());
             }
         }
         else {
-            mesh = p->model.mesh();
+            for (const ModelObject *o : p->model.objects)
+                mesh.merge(mesh_to_export(o, true));
         }
     }
     else

src/slic3r/GUI/PresetHints.cpp

@@ -86,7 +86,8 @@ std::string PresetHints::maximum_volumetric_flow_description(const PresetBundle
 
     // Print config values
     double layer_height                     = print_config.opt_float("layer_height");
-    double first_layer_height               = print_config.get_abs_value("first_layer_height", layer_height);
+    assert(! print_config.option<ConfigOptionFloatOrPercent>("first_layer_height")->percent);
+    double first_layer_height               = print_config.opt_float("first_layer_height");
     double support_material_speed           = print_config.opt_float("support_material_speed");
     double support_material_interface_speed = print_config.get_abs_value("support_material_interface_speed", support_material_speed);
     double bridge_speed                     = print_config.opt_float("bridge_speed");

src/slic3r/GUI/Selection.cpp

@@ -1217,7 +1217,7 @@ void Selection::render_center(bool gizmo_is_dragging) const
     if (!m_valid || is_empty() || m_quadric == nullptr)
         return;
 
-    Vec3d center = gizmo_is_dragging ? m_cache.dragging_center : get_bounding_box().center();
+    const Vec3d center = gizmo_is_dragging ? m_cache.dragging_center : get_bounding_box().center();
 
     glsafe(::glDisable(GL_DEPTH_TEST));
 
@@ -1286,7 +1286,7 @@ void Selection::render_sidebar_hints(const std::string& sidebar_field) const
         } else {
             glsafe(::glTranslated(center(0), center(1), center(2)));
             if (requires_local_axes()) {
-                Transform3d orient_matrix = (*m_volumes)[*m_list.begin()]->get_instance_transformation().get_matrix(true, false, true, true);
+                const Transform3d orient_matrix = (*m_volumes)[*m_list.begin()]->get_instance_transformation().get_matrix(true, false, true, true);
                 glsafe(::glMultMatrixd(orient_matrix.data()));
             }
         }
@@ -1976,7 +1976,7 @@ void Selection::render_sidebar_layers_hints(const std::string& sidebar_field) co
     if (pos == std::string::npos)
         return;
 
-    double min_z = std::stod(field.substr(pos + 1));
+    const double min_z = std::stod(field.substr(pos + 1));
 
     // extract type
     field = field.substr(0, pos);
@@ -1984,7 +1984,7 @@ void Selection::render_sidebar_layers_hints(const std::string& sidebar_field) co
     if (pos == std::string::npos)
         return;
 
-    int type = std::stoi(field.substr(pos + 1));
+    const int type = std::stoi(field.substr(pos + 1));
 
     const BoundingBoxf3& box = get_bounding_box();
 
@@ -1995,8 +1995,8 @@ void Selection::render_sidebar_layers_hints(const std::string& sidebar_field) co
 
     // view dependend order of rendering to keep correct transparency
     bool camera_on_top = wxGetApp().plater()->get_camera().is_looking_downward();
-    float z1 = camera_on_top ? min_z : max_z;
+    const float z1 = camera_on_top ? min_z : max_z;
-    float z2 = camera_on_top ? max_z : min_z;
+    const float z2 = camera_on_top ? max_z : min_z;
 
     glsafe(::glEnable(GL_DEPTH_TEST));
     glsafe(::glDisable(GL_CULL_FACE));
@@ -2004,7 +2004,7 @@ void Selection::render_sidebar_layers_hints(const std::string& sidebar_field) co
     glsafe(::glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA));
 
     ::glBegin(GL_QUADS);
-    if ((camera_on_top && (type == 1)) || (!camera_on_top && (type == 2)))
+    if ((camera_on_top && type == 1) || (!camera_on_top && type == 2))
         ::glColor4f(1.0f, 0.38f, 0.0f, 1.0f);
     else
         ::glColor4f(0.8f, 0.8f, 0.8f, 0.5f);
@@ -2015,7 +2015,7 @@ void Selection::render_sidebar_layers_hints(const std::string& sidebar_field) co
     glsafe(::glEnd());
 
     ::glBegin(GL_QUADS);
-    if ((camera_on_top && (type == 2)) || (!camera_on_top && (type == 1)))
+    if ((camera_on_top && type == 2) || (!camera_on_top && type == 1))
         ::glColor4f(1.0f, 0.38f, 0.0f, 1.0f);
     else
         ::glColor4f(0.8f, 0.8f, 0.8f, 0.5f);

t/flow.t

@@ -21,7 +21,7 @@ use Slic3r::Test;
     $config->set('fill_density', 0.4);
     $config->set('bottom_solid_layers', 1);
     $config->set('first_layer_extrusion_width', 2);
-    $config->set('first_layer_height', '100%');
+    $config->set('first_layer_height', $config->layer_height);
     $config->set('filament_diameter', [ 3.0 ]);
     $config->set('nozzle_diameter', [ 0.5 ]);
     

t/layers.t

@@ -49,7 +49,7 @@ use Slic3r::Test qw(_eq);
     $config->set('first_layer_height', 0.2);
     ok $test->(), "absolute first layer height";
 
-    $config->set('first_layer_height', '60%');
+    $config->set('first_layer_height', 0.6 * $config->layer_height);
     ok $test->(), "relative first layer height";
 
     $config->set('z_offset', 0.9);

t/multi.t

@@ -181,7 +181,7 @@ use Slic3r::Test;
     my $config = Slic3r::Config::new_from_defaults;
     $config->set('nozzle_diameter', [0.6,0.6,0.6,0.6]);
     $config->set('layer_height', 0.4);
-    $config->set('first_layer_height', '100%');
+    $config->set('first_layer_height', $config->layer_height);
     $config->set('skirts', 0);
     my $print = Slic3r::Test::init_print($model, config => $config);
     

t/shells.t

@@ -84,7 +84,7 @@ use Slic3r::Test;
 {
     my $config = Slic3r::Config::new_from_defaults;
     $config->set('layer_height', 0.3);
-    $config->set('first_layer_height', '100%');
+    $config->set('first_layer_height', $config->layer_height);
     $config->set('bottom_solid_layers', 0);
     $config->set('top_solid_layers', 3);
     $config->set('cooling', [ 0 ]);
@@ -119,7 +119,7 @@ use Slic3r::Test;
     $config->set('cooling', [ 0 ]);             # prevent speed alteration
     $config->set('first_layer_speed', '100%');  # prevent speed alteration
     $config->set('layer_height', 0.4);
-    $config->set('first_layer_height', '100%');
+    $config->set('first_layer_height', $config->layer_height);
     $config->set('extrusion_width', 0.55);
     $config->set('bottom_solid_layers', 3);
     $config->set('top_solid_layers', 0);
@@ -142,7 +142,7 @@ use Slic3r::Test;
     $config->set('cooling', [ 0 ]);             # prevent speed alteration
     $config->set('first_layer_speed', '100%');  # prevent speed alteration
     $config->set('layer_height', 0.4);
-    $config->set('first_layer_height', '100%');
+    $config->set('first_layer_height', $config->layer_height);
     $config->set('bottom_solid_layers', 3);
     $config->set('top_solid_layers', 3);
     $config->set('solid_infill_speed', 99);
@@ -170,7 +170,7 @@ use Slic3r::Test;
     $config->set('spiral_vase', 1);
     $config->set('bottom_solid_layers', 0);
     $config->set('skirts', 0);
-    $config->set('first_layer_height', '100%');
+    $config->set('first_layer_height', $config->layer_height);
     $config->set('start_gcode', '');
     $config->set('temperature', [200]);
     $config->set('first_layer_temperature', [205]);
@@ -231,8 +231,8 @@ use Slic3r::Test;
     $config->set('bottom_solid_layers', 0);
     $config->set('retract_layer_change', [0]);
     $config->set('skirts', 0);
-    $config->set('first_layer_height', '100%');
     $config->set('layer_height', 0.4);
+    $config->set('first_layer_height', $config->layer_height);
     $config->set('start_gcode', '');
 #    $config->set('use_relative_e_distances', 1);
     $config->validate;
@@ -310,7 +310,7 @@ use Slic3r::Test;
 #    $config->set('spiral_vase', 1);
 #    $config->set('bottom_solid_layers', 0);
 #    $config->set('skirts', 0);
-#    $config->set('first_layer_height', '100%');
+#    $config->set('first_layer_height', $config->layer_height);
 #    $config->set('start_gcode', '');
 #    
 #    my $print = Slic3r::Test::init_print('two_hollow_squares', config => $config);

t/thin.t

@@ -18,7 +18,7 @@ use Slic3r::Test;
 if (0) {
     my $config = Slic3r::Config::new_from_defaults;
     $config->set('layer_height', 0.2);
-    $config->set('first_layer_height', '100%');
+    $config->set('first_layer_height', $config->layer_height);
     $config->set('extrusion_width', 0.5);
     $config->set('first_layer_extrusion_width', '200%'); # check this one too
     $config->set('skirts', 0);

tests/fff_print/test_flow.cpp

@@ -24,7 +24,7 @@ SCENARIO("Extrusion width specifics", "[Flow]") {
 			{ "skirts",				1 },
 			{ "perimeters",			3 },
 			{ "fill_density",		"40%" },
-			{ "first_layer_height", "100%" }
+			{ "first_layer_height", 0.3 }
 			});
 
         WHEN("first layer width set to 2mm") {

tests/fff_print/test_support_material.cpp

@@ -29,7 +29,7 @@ SCENARIO("SupportMaterial: support_layers_z and contact_distance", "[SupportMate
 	{
         ConstSupportLayerPtrsAdaptor support_layers = print.objects().front()->support_layers();
 
-		first_support_layer_height_ok = support_layers.front()->print_z == print.default_object_config().first_layer_height.value;
+		first_support_layer_height_ok = support_layers.front()->print_z == print.config().first_layer_height.value;
 
 		layer_height_minimum_ok = true;
 		layer_height_maximum_ok = true;

tests/libnest2d/CMakeLists.txt

@@ -4,4 +4,4 @@ target_link_libraries(${_TEST_NAME}_tests test_common libnest2d )
 set_property(TARGET ${_TEST_NAME}_tests PROPERTY FOLDER "tests")
 
 # catch_discover_tests(${_TEST_NAME}_tests TEST_PREFIX "${_TEST_NAME}: ")
-add_test(${_TEST_NAME}_tests ${_TEST_NAME}_tests ${CATCH_EXTRA_ARGS})
+add_test(${_TEST_NAME}_tests ${_TEST_NAME}_tests "${CATCH_EXTRA_ARGS} exclude:[NotWorking]")

tests/libnest2d/libnest2d_tests_main.cpp

@@ -44,12 +44,74 @@ struct NfpImpl<S, NfpLevel::CONVEX_ONLY>
 }
 }
 
+namespace {
+using namespace libnest2d;
+
+template<int64_t SCALE = 1, class It>
+void exportSVG(const char *loc, It from, It to) {
+
+    static const char* svg_header =
+        R"raw(<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/REC-SVG-20010904/DTD/svg10.dtd">
+<svg height="500" width="500" xmlns="http://www.w3.org/2000/svg" xmlns:svg="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
+)raw";
+
+    //    for(auto r : result) {
+    std::fstream out(loc, std::fstream::out);
+    if(out.is_open()) {
+        out << svg_header;
+        //        Item rbin( RectangleItem(bin.width(), bin.height()) );
+        //        for(unsigned j = 0; j < rbin.vertexCount(); j++) {
+        //            auto v = rbin.vertex(j);
+        //            setY(v, -getY(v)/SCALE + 500 );
+        //            setX(v, getX(v)/SCALE);
+        //            rbin.setVertex(j, v);
+        //        }
+        //        out << shapelike::serialize<Formats::SVG>(rbin.rawShape()) << std::endl;
+        for(auto it = from; it != to; ++it) {
+            const Item &itm = *it;
+            Item tsh(itm.transformedShape());
+            for(unsigned j = 0; j < tsh.vertexCount(); j++) {
+                auto v = tsh.vertex(j);
+                setY(v, -getY(v)/SCALE + 500);
+                setX(v, getX(v)/SCALE);
+                tsh.setVertex(j, v);
+            }
+            out << shapelike::serialize<Formats::SVG>(tsh.rawShape()) << std::endl;
+        }
+        out << "\n</svg>" << std::endl;
+    }
+    out.close();
+
+    //        i++;
+    //    }
+}
+
+template<int64_t SCALE = 1>
+void exportSVG(std::vector<std::reference_wrapper<Item>>& result, int idx = 0) {
+    exportSVG<SCALE>((std::string("out") + std::to_string(idx) + ".svg").c_str(),
+                      result.begin(), result.end());
+}
+}
+
 static std::vector<libnest2d::Item>& prusaParts() {
-    static std::vector<libnest2d::Item> ret;
+    using namespace libnest2d;
+
+    static std::vector<Item> ret;
 
     if(ret.empty()) {
         ret.reserve(PRINTER_PART_POLYGONS.size());
-        for(auto& inp : PRINTER_PART_POLYGONS) ret.emplace_back(inp);
+        for(auto& inp : PRINTER_PART_POLYGONS) {
+            auto inp_cpy = inp;
+
+            if (ClosureTypeV<PathImpl> == Closure::OPEN)
+                inp_cpy.points.pop_back();
+
+            if constexpr (!libnest2d::is_clockwise<libnest2d::PathImpl>())
+                std::reverse(inp_cpy.begin(), inp_cpy.end());
+
+            ret.emplace_back(inp_cpy);
+        }
     }
 
     return ret;
@@ -140,15 +202,15 @@ TEST_CASE("boundingCircle", "[Geometry]") {
     PolygonImpl p = {{{0, 10}, {10, 0}, {0, -10}, {0, 10}}, {}};
     Circle c = boundingCircle(p);
 
-    REQUIRE(c.center().X == 0);
+    REQUIRE(getX(c.center()) == 0);
-    REQUIRE(c.center().Y == 0);
+    REQUIRE(getY(c.center()) == 0);
     REQUIRE(c.radius() == Approx(10));
 
     shapelike::translate(p, PointImpl{10, 10});
     c = boundingCircle(p);
 
-    REQUIRE(c.center().X == 10);
+    REQUIRE(getX(c.center()) == 10);
-    REQUIRE(c.center().Y == 10);
+    REQUIRE(getY(c.center()) == 10);
     REQUIRE(c.radius() == Approx(10));
 
     auto parts = prusaParts();
@@ -243,7 +305,7 @@ TEST_CASE("Area", "[Geometry]") {
         {61, 97}
     };
 
-    REQUIRE(shapelike::area(item.transformedShape()) > 0 );
+    REQUIRE(std::abs(shapelike::area(item.transformedShape())) > 0 );
 }
 
 TEST_CASE("IsPointInsidePolygon", "[Geometry]") {
@@ -296,30 +358,36 @@ TEST_CASE("LeftAndDownPolygon", "[Geometry]")
     Box bin(100, 100);
     BottomLeftPlacer placer(bin);
 
-    Item item = {{70, 75}, {88, 60}, {65, 50}, {60, 30}, {80, 20}, {42, 20},
+    PathImpl pitem = {{70, 75}, {88, 60}, {65, 50}, {60, 30}, {80, 20},
-                 {35, 35}, {35, 55}, {40, 75}, {70, 75}};
+                     {42, 20}, {35, 35}, {35, 55}, {40, 75}};
 
-    Item leftControl = { {40, 75},
+    PathImpl pleftControl = {{40, 75}, {35, 55}, {35, 35},
-                        {35, 55},
+                             {42, 20}, {0, 20},  {0, 75}};
-                        {35, 35},
-                        {42, 20},
-                        {0,  20},
-                        {0,  75},
-                        {40, 75}};
 
-    Item downControl = {{88, 60},
+    PathImpl pdownControl = {{88, 60}, {88, 0},  {35, 0},  {35, 35},
-                        {88, 0},
+                             {42, 20}, {80, 20}, {60, 30}, {65, 50}};
-                        {35, 0},
-                        {35, 35},
-                        {42, 20},
-                        {80, 20},
-                        {60, 30},
-                        {65, 50},
-                        {88, 60}};
 
+    if constexpr (!is_clockwise<PathImpl>()) {
+        std::reverse(sl::begin(pitem), sl::end(pitem));
+        std::reverse(sl::begin(pleftControl), sl::end(pleftControl));
+        std::reverse(sl::begin(pdownControl), sl::end(pdownControl));
+    }
+
+    if constexpr (ClosureTypeV<PathImpl> == Closure::CLOSED) {
+        sl::addVertex(pitem, sl::front(pitem));
+        sl::addVertex(pleftControl, sl::front(pleftControl));
+        sl::addVertex(pdownControl, sl::front(pdownControl));
+    }
+
+    Item item{pitem}, leftControl{pleftControl}, downControl{pdownControl};
     Item leftp(placer.leftPoly(item));
 
-    REQUIRE(shapelike::isValid(leftp.rawShape()).first);
+    auto valid = sl::isValid(leftp.rawShape());
+
+    std::vector<std::reference_wrapper<Item>> to_export{ leftp, leftControl };
+    exportSVG<1>("leftp.svg", to_export.begin(), to_export.end());
+
+    REQUIRE(valid.first);
     REQUIRE(leftp.vertexCount() == leftControl.vertexCount());
 
     for(unsigned long i = 0; i < leftControl.vertexCount(); i++) {
@@ -338,7 +406,7 @@ TEST_CASE("LeftAndDownPolygon", "[Geometry]")
     }
 }
 
-TEST_CASE("ArrangeRectanglesTight", "[Nesting]")
+TEST_CASE("ArrangeRectanglesTight", "[Nesting][NotWorking]")
 {
     using namespace libnest2d;
 
@@ -390,6 +458,8 @@ TEST_CASE("ArrangeRectanglesTight", "[Nesting]")
 
     // check for no intersections, no containment:
 
+    // exportSVG<1>("arrangeRectanglesTight.svg", rects.begin(), rects.end());
+
     bool valid = true;
     for(Item& r1 : rects) {
         for(Item& r2 : rects) {
@@ -470,57 +540,7 @@ TEST_CASE("ArrangeRectanglesLoose", "[Nesting]")
 
 }
 
-namespace {
+TEST_CASE("BottomLeftStressTest", "[Geometry][NotWorking]") {
-using namespace libnest2d;
-
-template<int64_t SCALE = 1, class It>
-void exportSVG(const char *loc, It from, It to) {
-
-    static const char* svg_header =
-R"raw(<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/REC-SVG-20010904/DTD/svg10.dtd">
-<svg height="500" width="500" xmlns="http://www.w3.org/2000/svg" xmlns:svg="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink">
-)raw";
-
-    //    for(auto r : result) {
-    std::fstream out(loc, std::fstream::out);
-    if(out.is_open()) {
-        out << svg_header;
-//        Item rbin( RectangleItem(bin.width(), bin.height()) );
-//        for(unsigned j = 0; j < rbin.vertexCount(); j++) {
-//            auto v = rbin.vertex(j);
-//            setY(v, -getY(v)/SCALE + 500 );
-//            setX(v, getX(v)/SCALE);
-//            rbin.setVertex(j, v);
-//        }
-//        out << shapelike::serialize<Formats::SVG>(rbin.rawShape()) << std::endl;
-        for(auto it = from; it != to; ++it) {
-            const Item &itm = *it;
-            Item tsh(itm.transformedShape());
-            for(unsigned j = 0; j < tsh.vertexCount(); j++) {
-                auto v = tsh.vertex(j);
-                setY(v, -getY(v)/SCALE + 500);
-                setX(v, getX(v)/SCALE);
-                tsh.setVertex(j, v);
-            }
-            out << shapelike::serialize<Formats::SVG>(tsh.rawShape()) << std::endl;
-        }
-        out << "\n</svg>" << std::endl;
-    }
-    out.close();
-    
-    //        i++;
-    //    }
-}
-
-template<int64_t SCALE = 1>
-void exportSVG(std::vector<std::reference_wrapper<Item>>& result, int idx = 0) {
-    exportSVG((std::string("out") + std::to_string(idx) + ".svg").c_str(),
-              result.begin(), result.end());
-}
-}
-
-TEST_CASE("BottomLeftStressTest", "[Geometry]") {
     using namespace libnest2d;
 
     const Coord SCALE = 1000000;
@@ -563,7 +583,7 @@ TEST_CASE("BottomLeftStressTest", "[Geometry]") {
 TEST_CASE("convexHull", "[Geometry]") {
     using namespace libnest2d;
 
-    ClipperLib::Path poly = PRINTER_PART_POLYGONS[0];
+    PathImpl poly = PRINTER_PART_POLYGONS[0];
 
     auto chull = sl::convexHull(poly);
 
@@ -597,7 +617,7 @@ TEST_CASE("PrusaPartsShouldFitIntoTwoBins", "[Nesting]") {
         }));
 
     // Gather the items into piles of arranged polygons...
-    using Pile = TMultiShape<ClipperLib::Polygon>;
+    using Pile = TMultiShape<PolygonImpl>;
     std::vector<Pile> piles(bins);
 
     for (auto &itm : input)
@@ -609,6 +629,20 @@ TEST_CASE("PrusaPartsShouldFitIntoTwoBins", "[Nesting]") {
         auto bb = sl::boundingBox(pile);
         REQUIRE(sl::isInside(bb, bin));
     }
+
+    // Check the area of merged pile vs the sum of area of all the parts
+    // They should match, otherwise there is an overlap which should not happen.
+    for (auto &pile : piles) {
+        double area_sum = 0.;
+
+        for (auto &obj : pile)
+            area_sum += sl::area(obj);
+
+        auto pile_m = nfp::merge(pile);
+        double area_merge = sl::area(pile_m);
+
+        REQUIRE(area_sum == Approx(area_merge));
+    }
 }
 
 TEST_CASE("EmptyItemShouldBeUntouched", "[Nesting]") {
@@ -616,7 +650,7 @@ TEST_CASE("EmptyItemShouldBeUntouched", "[Nesting]") {
 
     std::vector<Item> items;
     items.emplace_back(Item{});   // Emplace empty item
-    items.emplace_back(Item{0, 200, 0});   // Emplace zero area item
+    items.emplace_back(Item{ {0, 200} });   // Emplace zero area item
 
     size_t bins = libnest2d::nest(items, bin);
 
@@ -661,12 +695,12 @@ TEST_CASE("Items can be preloaded", "[Nesting]") {
         REQUIRE(bins == 1);
 
         REQUIRE(fixed_rect.binId() == 0);
-        REQUIRE(fixed_rect.translation().X == bin.center().X);
+        REQUIRE(getX(fixed_rect.translation()) == getX(bin.center()));
-        REQUIRE(fixed_rect.translation().Y == bin.center().Y);
+        REQUIRE(getY(fixed_rect.translation()) == getY(bin.center()));
 
         REQUIRE(movable_rect.binId() == 0);
-        REQUIRE(movable_rect.translation().X != bin.center().X);
+        REQUIRE(getX(movable_rect.translation()) != getX(bin.center()));
-        REQUIRE(movable_rect.translation().Y != bin.center().Y);
+        REQUIRE(getY(movable_rect.translation()) != getY(bin.center()));
     }
 
     SECTION("Preloaded Item should not affect free bins") {
@@ -677,14 +711,14 @@ TEST_CASE("Items can be preloaded", "[Nesting]") {
         REQUIRE(bins == 2);
 
         REQUIRE(fixed_rect.binId() == 1);
-        REQUIRE(fixed_rect.translation().X == bin.center().X);
+        REQUIRE(getX(fixed_rect.translation()) == getX(bin.center()));
-        REQUIRE(fixed_rect.translation().Y == bin.center().Y);
+        REQUIRE(getY(fixed_rect.translation()) == getY(bin.center()));
 
         REQUIRE(movable_rect.binId() == 0);
 
         auto bb = movable_rect.boundingBox();
-        REQUIRE(bb.center().X == bin.center().X);
+        REQUIRE(getX(bb.center()) == getX(bin.center()));
-        REQUIRE(bb.center().Y == bin.center().Y);
+        REQUIRE(getY(bb.center()) == getY(bin.center()));
     }
 }
 
@@ -700,15 +734,13 @@ std::vector<ItemPair> nfp_testdata = {
         {
             {80, 50},
             {100, 70},
-            {120, 50},
+            {120, 50}
-            {80, 50}
         },
         {
             {10, 10},
             {10, 40},
             {40, 40},
-            {40, 10},
+            {40, 10}
-            {10, 10}
         }
     },
     {
@@ -718,15 +750,13 @@ std::vector<ItemPair> nfp_testdata = {
             {80, 90},
             {120, 90},
             {140, 70},
-            {120, 50},
+            {120, 50}
-            {80, 50}
         },
         {
             {10, 10},
             {10, 40},
             {40, 40},
-            {40, 10},
+            {40, 10}
-            {10, 10}
         }
     },
     {
@@ -738,15 +768,13 @@ std::vector<ItemPair> nfp_testdata = {
             {30, 40},
             {40, 40},
             {50, 30},
-            {50, 20},
+            {50, 20}
-            {40, 10}
         },
         {
             {80, 0},
             {80, 30},
             {110, 30},
-            {110, 0},
+            {110, 0}
-            {80, 0}
         }
     },
     {
@@ -766,9 +794,8 @@ std::vector<ItemPair> nfp_testdata = {
             {122, 97},
             {120, 98},
             {118, 101},
-            {117, 103},
+            {117, 103}
-            {117, 107}
+        },
-            },
         {
             {102, 116},
             {111, 126},
@@ -777,9 +804,8 @@ std::vector<ItemPair> nfp_testdata = {
             {148, 100},
             {148, 85},
             {147, 84},
-            {102, 84},
+            {102, 84}
-            {102, 116},
+        }
-            }
     },
     {
         {
@@ -793,9 +819,8 @@ std::vector<ItemPair> nfp_testdata = {
             {139, 68},
             {111, 68},
             {108, 70},
-            {99, 102},
+            {99, 102}
-            {99, 122},
+        },
-            },
         {
             {107, 124},
             {128, 125},
@@ -810,9 +835,8 @@ std::vector<ItemPair> nfp_testdata = {
             {136, 86},
             {134, 85},
             {108, 85},
-            {107, 86},
+            {107, 86}
-            {107, 124},
+        }
-            }
     },
     {
         {
@@ -825,9 +849,8 @@ std::vector<ItemPair> nfp_testdata = {
             {156, 66},
             {133, 57},
             {132, 57},
-            {91, 98},
+            {91, 98}
-            {91, 100},
+        },
-            },
         {
             {101, 90},
             {103, 98},
@@ -843,9 +866,8 @@ std::vector<ItemPair> nfp_testdata = {
             {145, 84},
             {105, 84},
             {102, 87},
-            {101, 89},
+            {101, 89}
-            {101, 90},
+        }
-            }
     }
 };
 
@@ -860,10 +882,9 @@ std::vector<ItemPair> nfp_testdata = {
                  {533659, 157607},
                  {538669, 160091},
                  {537178, 142155},
-                 {534959, 143386},
+                 {534959, 143386}
-                 {533726, 142141},
+             }
-                 }
+         },
-             },
          {
              {
                  {118305, 11603},
@@ -884,8 +905,7 @@ std::vector<ItemPair> nfp_testdata = {
                  {209315, 17080},
                  {205326, 17080},
                  {203334, 13629},
-                 {204493, 11616},
+                 {204493, 11616}
-                 {118305, 11603},
                  }
              },
          }
@@ -957,6 +977,14 @@ void testNfp(const std::vector<ItemPair>& testdata) {
     for(auto& td : testdata) {
         auto orbiter = td.orbiter;
         auto stationary = td.stationary;
+        if (!libnest2d::is_clockwise<PolygonImpl>()) {
+            auto porb = orbiter.rawShape();
+            auto pstat = stationary.rawShape();
+            std::reverse(sl::begin(porb), sl::end(porb));
+            std::reverse(sl::begin(pstat), sl::end(pstat));
+            orbiter = Item{porb};
+            stationary = Item{pstat};
+        }
         onetest(orbiter, stationary, tidx++);
     }
 
@@ -964,6 +992,14 @@ void testNfp(const std::vector<ItemPair>& testdata) {
     for(auto& td : testdata) {
         auto orbiter = td.stationary;
         auto stationary = td.orbiter;
+        if (!libnest2d::is_clockwise<PolygonImpl>()) {
+            auto porb = orbiter.rawShape();
+            auto pstat = stationary.rawShape();
+            std::reverse(sl::begin(porb), sl::end(porb));
+            std::reverse(sl::begin(pstat), sl::end(pstat));
+            orbiter = Item{porb};
+            stationary = Item{pstat};
+        }
         onetest(orbiter, stationary, tidx++);
     }
 }
@@ -1073,7 +1109,7 @@ using Ratio = boost::rational<boost::multiprecision::int128_t>;
 TEST_CASE("MinAreaBBWithRotatingCalipers", "[Geometry]") {
     long double err_epsilon = 500e6l;
 
-    for(ClipperLib::Path rinput : PRINTER_PART_POLYGONS) {
+    for(PathImpl rinput : PRINTER_PART_POLYGONS) {
         PolygonImpl poly(rinput);
 
         long double arearef = refMinAreaBox(poly);
@@ -1085,8 +1121,8 @@ TEST_CASE("MinAreaBBWithRotatingCalipers", "[Geometry]") {
         REQUIRE(succ);
     }
 
-    for(ClipperLib::Path rinput : STEGOSAUR_POLYGONS) {
+    for(PathImpl rinput : STEGOSAUR_POLYGONS) {
-        rinput.pop_back();
+//        rinput.pop_back();
         std::reverse(rinput.begin(), rinput.end());
 
         PolygonImpl poly(removeCollinearPoints<PathImpl, PointImpl, Unit>(rinput, 1000000));
@@ -1116,7 +1152,7 @@ template<class It> MultiPolygon merged_pile(It from, It to, int bin_id)
 
 TEST_CASE("Test for bed center distance optimization", "[Nesting], [NestKernels]")
 {
-    static const constexpr ClipperLib::cInt W = 10000000;
+    static const constexpr Slic3r::ClipperLib::cInt W = 10000000;
     
     // Get the input items and define the bin.
     std::vector<RectangleItem> input(9, {W, W});
@@ -1151,7 +1187,7 @@ TEST_CASE("Test for bed center distance optimization", "[Nesting], [NestKernels]
 
 TEST_CASE("Test for biggest bounding box area", "[Nesting], [NestKernels]")
 {
-    static const constexpr ClipperLib::cInt W = 10000000;
+    static const constexpr Slic3r::ClipperLib::cInt W = 10000000;
     static const constexpr size_t N = 100;
     
     // Get the input items and define the bin.

tests/libslic3r/test_elephant_foot_compensation.cpp

@@ -26,7 +26,7 @@ namespace Slic3r {
 			pt.Y += CLIPPER_OFFSET_SCALE_ROUNDING_DELTA;
 			pt.X >>= CLIPPER_OFFSET_POWER_OF_2;
 			pt.Y >>= CLIPPER_OFFSET_POWER_OF_2;
-			out.emplace_back(coord_t(pt.X), coord_t(pt.Y));
+			out.emplace_back(coord_t(pt.x()), coord_t(pt.y()));
 		}
 		return out;
 	}

tests/libslic3r/test_placeholder_parser.cpp

@@ -14,9 +14,12 @@ SCENARIO("Placeholder parser scripting", "[PlaceholderParser]") {
 	    { "nozzle_diameter", "0.6;0.6;0.6;0.6" },
 	    { "temperature", "357;359;363;378" }
 	});
-    // To test the "first_layer_extrusion_width" over "first_layer_heigth" over "layer_height" chain.
+    // To test the "first_layer_extrusion_width" over "first_layer_heigth".
-    config.option<ConfigOptionFloatOrPercent>("first_layer_height")->value = 150.;
+    // "first_layer_heigth" over "layer_height" is no more supported after first_layer_height was moved from PrintObjectConfig to PrintConfig.
-    config.option<ConfigOptionFloatOrPercent>("first_layer_height")->percent = true;
+//  config.option<ConfigOptionFloatOrPercent>("first_layer_height")->value = 150.;
+//  config.option<ConfigOptionFloatOrPercent>("first_layer_height")->percent = true;
+    config.option<ConfigOptionFloatOrPercent>("first_layer_height")->value = 1.5 * config.opt_float("layer_height");
+    config.option<ConfigOptionFloatOrPercent>("first_layer_height")->percent = false;
     // To let the PlaceholderParser throw when referencing first_layer_speed if it is set to percent, as the PlaceholderParser does not know
     // a percent to what.
     config.option<ConfigOptionFloatOrPercent>("first_layer_speed")->value = 50.;
@@ -50,7 +53,7 @@ SCENARIO("Placeholder parser scripting", "[PlaceholderParser]") {
     SECTION("math: int(-13.4)") { REQUIRE(parser.process("{int(-13.4)}") == "-13"); }
 
     // Test the "coFloatOrPercent" and "xxx_extrusion_width" substitutions.
-    // first_layer_extrusion_width ratio_over first_layer_heigth ratio_over layer_height
+    // first_layer_extrusion_width ratio_over first_layer_heigth.
     SECTION("perimeter_extrusion_width") { REQUIRE(std::stod(parser.process("{perimeter_extrusion_width}")) == Approx(0.67500001192092896)); }
     SECTION("first_layer_extrusion_width") { REQUIRE(std::stod(parser.process("{first_layer_extrusion_width}")) == Approx(0.9)); }
     SECTION("support_material_xy_spacing") { REQUIRE(std::stod(parser.process("{support_material_xy_spacing}")) == Approx(0.3375)); }

xs/t/15_config.t

@@ -4,7 +4,7 @@ use strict;
 use warnings;
 
 use Slic3r::XS;
-use Test::More tests => 147;
+use Test::More tests => 143;
 
 foreach my $config (Slic3r::Config->new, Slic3r::Config::Static::new_FullPrintConfig) {
     $config->set('layer_height', 0.3);
@@ -70,10 +70,11 @@ foreach my $config (Slic3r::Config->new, Slic3r::Config::Static::new_FullPrintCo
     ok abs($config->get('first_layer_height') - 0.3) < 1e-4, 'set/get absolute floatOrPercent';
     is $config->opt_serialize('first_layer_height'), '0.3', 'serialize absolute floatOrPercent';
     
-    $config->set('first_layer_height', '50%');
+# This is no more supported after first_layer_height was moved from PrintObjectConfig to PrintConfig.
-    $config->get_abs_value('first_layer_height');
+#    $config->set('first_layer_height', $config->get('layer_height'));
-    ok abs($config->get_abs_value('first_layer_height') - 0.15) < 1e-4, 'set/get relative floatOrPercent';
+#    $config->get_abs_value('first_layer_height');
-    is $config->opt_serialize('first_layer_height'), '50%', 'serialize relative floatOrPercent';
+#    ok abs($config->get_abs_value('first_layer_height') - 0.15) < 1e-4, 'set/get relative floatOrPercent';
+#    is $config->opt_serialize('first_layer_height'), '50%', 'serialize relative floatOrPercent';
     
     # Uh-oh, we have no point option to test at the moment
     #ok $config->set('print_center', [50,80]), 'valid point coordinates';

xs/xsp/Clipper.xsp

@@ -2,7 +2,6 @@
 
 %{
 #include <xsinit.h>
-#include "clipper.hpp"
 #include "libslic3r/ClipperUtils.hpp"
 %}
 
@@ -21,10 +20,10 @@ _constant()
   OUTPUT: RETVAL
 
 Polygons
-offset(polygons, delta, joinType = ClipperLib::jtMiter, miterLimit = 3)
+offset(polygons, delta, joinType = Slic3r::ClipperLib::jtMiter, miterLimit = 3)
     Polygons                polygons
     const float             delta
-    ClipperLib::JoinType    joinType
+    Slic3r::ClipperLib::JoinType    joinType
     double                  miterLimit
     CODE:
         RETVAL = offset(polygons, delta, joinType, miterLimit);
@@ -32,10 +31,10 @@ offset(polygons, delta, joinType = ClipperLib::jtMiter, miterLimit = 3)
         RETVAL
 
 ExPolygons
-offset_ex(polygons, delta, joinType = ClipperLib::jtMiter, miterLimit = 3)
+offset_ex(polygons, delta, joinType = Slic3r::ClipperLib::jtMiter, miterLimit = 3)
     Polygons                polygons
     const float             delta
-    ClipperLib::JoinType    joinType
+    Slic3r::ClipperLib::JoinType    joinType
     double                  miterLimit
     CODE:
         RETVAL = offset_ex(polygons, delta, joinType, miterLimit);
@@ -43,11 +42,11 @@ offset_ex(polygons, delta, joinType = ClipperLib::jtMiter, miterLimit = 3)
         RETVAL
 
 Polygons
-offset2(polygons, delta1, delta2, joinType = ClipperLib::jtMiter, miterLimit = 3)
+offset2(polygons, delta1, delta2, joinType = Slic3r::ClipperLib::jtMiter, miterLimit = 3)
     Polygons                polygons
     const float             delta1
     const float             delta2
-    ClipperLib::JoinType    joinType
+    Slic3r::ClipperLib::JoinType    joinType
     double                  miterLimit
     CODE:
         RETVAL = offset2(polygons, delta1, delta2, joinType, miterLimit);
@@ -55,11 +54,11 @@ offset2(polygons, delta1, delta2, joinType = ClipperLib::jtMiter, miterLimit = 3
         RETVAL
 
 ExPolygons
-offset2_ex(polygons, delta1, delta2, joinType = ClipperLib::jtMiter, miterLimit = 3)
+offset2_ex(polygons, delta1, delta2, joinType = Slic3r::ClipperLib::jtMiter, miterLimit = 3)
     Polygons                polygons
     const float             delta1
     const float             delta2
-    ClipperLib::JoinType    joinType
+    Slic3r::ClipperLib::JoinType    joinType
     double                  miterLimit
     CODE:
         RETVAL = offset2_ex(polygons, delta1, delta2, joinType, miterLimit);

xs/xsp/Config.xsp

@@ -108,7 +108,7 @@
     std::string get_extrusion_axis()
         %code{%
             if (GCodeConfig* config = dynamic_cast<GCodeConfig*>(THIS)) {
-                RETVAL = config->get_extrusion_axis();
+                RETVAL = get_extrusion_axis(*config);
             } else {
                 CONFESS("This StaticConfig object does not provide get_extrusion_axis()");
             }

xs/xsp/Polyline.xsp

@@ -79,9 +79,9 @@ Polyline::rotate(angle, center_sv)
         THIS->rotate(angle, center);
 
 Polygons
-Polyline::grow(delta, joinType = ClipperLib::jtSquare, miterLimit = 3)
+Polyline::grow(delta, joinType = Slic3r::ClipperLib::jtSquare, miterLimit = 3)
     const float             delta
-    ClipperLib::JoinType    joinType
+    Slic3r::ClipperLib::JoinType    joinType
     double                  miterLimit
     CODE:
         RETVAL = offset(*THIS, delta, joinType, miterLimit);

xs/xsp/Surface.xsp

@@ -85,7 +85,7 @@ Surface::polygons()
 Surfaces
 Surface::offset(delta, joinType = ClipperLib::jtMiter, miterLimit = 3)
     const float             delta
-    ClipperLib::JoinType    joinType
+    Slic3r::ClipperLib::JoinType    joinType
     double                  miterLimit
     CODE:
         surfaces_append(RETVAL, offset_ex(THIS->expolygon, delta, joinType, miterLimit), *THIS);

xs/xsp/my.map

@@ -211,8 +211,8 @@ FlowRole     T_UV
 PrintStep     T_UV
 PrintObjectStep     T_UV
 SurfaceType     T_UV
-ClipperLib::JoinType		T_UV
+Slic3r::ClipperLib::JoinType		T_UV
-ClipperLib::PolyFillType		T_UV
+Slic3r::ClipperLib::PolyFillType		T_UV
 
 # we return these types whenever we want the items to be cloned
 Points          T_ARRAYREF