diff --git a/Build.PL b/Build.PL
index 31ec9cf82..e006d11eb 100644
--- a/Build.PL
+++ b/Build.PL
@@ -40,10 +40,7 @@ if ($gui) {
     Socket                          2.016
     );
     %recommends = qw(
-    Growl::GNTP                     0.15
     Wx::GLCanvas                    0
-    LWP::UserAgent                  0
-    Net::Bonjour                    0
     );
     if ($^O eq 'MSWin32') {
         $recommends{"Win32::TieRegistry"} = 0;
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 2b860068b..cb3d6dfd6 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -52,18 +52,21 @@ endif()
 
 add_subdirectory(xs)
 
+get_filename_component(PERL_BIN_PATH "${PERL_EXECUTABLE}" DIRECTORY)
 if (MSVC)
 	# By default the startup project in MSVC is the 'ALL_BUILD' cmake-created project,
 	# but we want 'slic3r' as the startup one because debugging run command is associated with it.
 	# (Unfortunatelly it cannot be associated with ALL_BUILD using CMake.)
 	# Note: For some reason this needs to be set in the top-level CMakeLists.txt
 	set_property(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY VS_STARTUP_PROJECT XS)
+	set(PERL_PROVE "${PERL_BIN_PATH}/prove.bat")
+else ()
+	set(PERL_PROVE "${PERL_BIN_PATH}/prove")
 endif ()
 
 enable_testing ()
-get_filename_component(PERL_BIN_PATH "${PERL_EXECUTABLE}" DIRECTORY)
-add_test (NAME xs COMMAND "${PERL_EXECUTABLE}" ${PERL_BIN_PATH}/prove -I ${PROJECT_SOURCE_DIR}/local-lib/lib/perl5 WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}/xs)
-add_test (NAME integration COMMAND "${PERL_EXECUTABLE}" ${PERL_BIN_PATH}/prove WORKING_DIRECTORY ${PROJECT_SOURCE_DIR})
+add_test (NAME xs COMMAND "${PERL_EXECUTABLE}" ${PERL_PROVE} -I ${PROJECT_SOURCE_DIR}/local-lib/lib/perl5 WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}/xs)
+add_test (NAME integration COMMAND "${PERL_EXECUTABLE}" ${PERL_PROVE} WORKING_DIRECTORY ${PROJECT_SOURCE_DIR})
 
 install(PROGRAMS slic3r.pl DESTINATION bin RENAME slic3r-prusa3d)
 
diff --git a/doc/deps-build/unix-static/Makefile b/doc/deps-build/unix-static/Makefile
index 71e46320b..21740bc53 100644
--- a/doc/deps-build/unix-static/Makefile
+++ b/doc/deps-build/unix-static/Makefile
@@ -67,13 +67,17 @@ $(TBB).tar.gz:
 	curl -L -o $@ https://github.com/wjakob/tbb/archive/$(TBB_SHA).tar.gz
 
 
+# Note: libcurl build system seems to be a bit wonky about finding openssl (cf. #2378).
+# It seems that currently the only working option is to set a prefix in the openssl build
+# and use the `--with-ssl=...` option in libcurl.
+# Additionally, pkg-config needs to be installed and openssl libs need to NOT be installed on the build system.
 
 libopenssl: $(OPENSSL).tar.gz
 	tar -zxvf $(OPENSSL).tar.gz
-	cd $(OPENSSL) && ./config --openssldir=/etc/ssl shared no-ssl3-method no-dynamic-engine '-Wa,--noexecstack'
-	make -C $(OPENSSL) depend
-	make -C $(OPENSSL) -j$(NPROC)
-	make -C $(OPENSSL) install DESTDIR=$(DESTDIR)
+	cd $(OPENSSL) && ./config --prefix=$(DESTDIR)/usr/local no-shared no-ssl3-method no-dynamic-engine '-Wa,--noexecstack'
+	$(MAKE) -C $(OPENSSL) depend
+	$(MAKE) -C $(OPENSSL) -j$(NPROC)
+	$(MAKE) -C $(OPENSSL) install_sw
 
 $(OPENSSL).tar.gz:
 	curl -L -o $@ 'https://github.com/openssl/openssl/archive/OpenSSL_1_1_0g.tar.gz'
@@ -82,10 +86,9 @@ $(OPENSSL).tar.gz:
 
 libcurl: libopenssl $(CURL).tar.gz
 	tar -zxvf $(CURL).tar.gz
-#	Note: It seems setting custom openssl path doesn't work when pkg-config and system openssl devel libs are installed
 	cd $(CURL) && ./configure \
 		--enable-static \
-		--enable-shared \
+		--disable-shared \
 		--with-ssl=$(DESTDIR)/usr/local \
 		--with-pic \
 		--enable-ipv6 \
diff --git a/lib/Slic3r/GUI.pm b/lib/Slic3r/GUI.pm
index 7a3b30a6b..5ade026af 100644
--- a/lib/Slic3r/GUI.pm
+++ b/lib/Slic3r/GUI.pm
@@ -15,7 +15,6 @@ use Slic3r::GUI::Controller;
 use Slic3r::GUI::Controller::ManualControlDialog;
 use Slic3r::GUI::Controller::PrinterPanel;
 use Slic3r::GUI::MainFrame;
-use Slic3r::GUI::Notifier;
 use Slic3r::GUI::Plater;
 use Slic3r::GUI::Plater::2D;
 use Slic3r::GUI::Plater::2DToolpaths;
@@ -34,7 +33,6 @@ use Slic3r::GUI::SystemInfo;
 use Wx::Locale gettext => 'L';
 
 our $have_OpenGL = eval "use Slic3r::GUI::3DScene; 1";
-our $have_LWP    = eval "use LWP::UserAgent; 1";
 
 use Wx 0.9901 qw(:bitmap :dialog :icon :id :misc :systemsettings :toplevelwindow :filedialog :font);
 use Wx::Event qw(EVT_IDLE EVT_COMMAND EVT_MENU);
@@ -88,7 +86,6 @@ sub OnInit {
     Slic3r::set_data_dir($datadir || Wx::StandardPaths::Get->GetUserDataDir);
     Slic3r::GUI::set_wxapp($self);
 
-    $self->{notifier} = Slic3r::GUI::Notifier->new;
     $self->{app_config} = Slic3r::GUI::AppConfig->new;
     $self->{preset_bundle} = Slic3r::GUI::PresetBundle->new;
 
@@ -117,6 +114,8 @@ sub OnInit {
     }
     eval { $self->{preset_bundle}->load_selections($self->{app_config}) };
     $run_wizard = 1 if $self->{preset_bundle}->has_defauls_only;
+
+    Slic3r::GUI::set_preset_bundle($self->{preset_bundle});
     
     # application frame
     Wx::Image::FindHandlerType(wxBITMAP_TYPE_PNG) || Wx::Image::AddHandler(Wx::PNGHandler->new);
@@ -270,7 +269,9 @@ sub notify {
     $frame->RequestUserAttention(&Wx::wxMAC ? wxUSER_ATTENTION_ERROR : wxUSER_ATTENTION_INFO)
         unless ($frame->IsActive);
 
-    $self->{notifier}->notify($message);
+    # There used to be notifier using a Growl application for OSX, but Growl is dead.
+    # The notifier also supported the Linux X D-bus notifications, but that support was broken.
+    #TODO use wxNotificationMessage?
 }
 
 # Called after the Preferences dialog is closed and the program settings are saved.
diff --git a/lib/Slic3r/GUI/3DScene.pm b/lib/Slic3r/GUI/3DScene.pm
index f9e9e668d..75a154281 100644
--- a/lib/Slic3r/GUI/3DScene.pm
+++ b/lib/Slic3r/GUI/3DScene.pm
@@ -68,6 +68,7 @@ __PACKAGE__->mk_accessors( qw(_quat _dirty init
                               _zoom
                               
                               _legend_enabled
+                              _warning_enabled
                               _apply_zoom_to_volumes_filter
                                                             
                               ) );
@@ -142,6 +143,7 @@ sub new {
     $self->_sphi(45);
     $self->_zoom(1);
     $self->_legend_enabled(0);
+    $self->_warning_enabled(0);
     $self->use_plain_shader(0);
     $self->_apply_zoom_to_volumes_filter(0);
 
@@ -217,7 +219,12 @@ sub new {
 
 sub set_legend_enabled {
     my ($self, $value) = @_;
-   $self->_legend_enabled($value);
+    $self->_legend_enabled($value);
+}
+
+sub set_warning_enabled {
+    my ($self, $value) = @_;
+    $self->_warning_enabled($value);
 }
 
 sub Destroy {
@@ -400,6 +407,10 @@ sub mouse_event {
             $self->Refresh;
             $self->Update;
         } else {
+            # The mouse_to_3d gets the Z coordinate from the Z buffer at the screen coordinate $pos->x,y,
+            # an converts the screen space coordinate to unscaled object space.
+            my $pos3d = ($volume_idx == -1) ? undef : $self->mouse_to_3d(@$pos);
+
             # Select volume in this 3D canvas.
             # Don't deselect a volume if layer editing is enabled. We want the object to stay selected
             # during the scene manipulation.
@@ -427,9 +438,6 @@ sub mouse_event {
             
             if ($volume_idx != -1) {
                 if ($e->LeftDown && $self->enable_moving) {
-                    # The mouse_to_3d gets the Z coordinate from the Z buffer at the screen coordinate $pos->x,y,
-                    # an converts the screen space coordinate to unscaled object space.
-                    my $pos3d = $self->mouse_to_3d(@$pos);
                     # Only accept the initial position, if it is inside the volume bounding box.
                     my $volume_bbox = $self->volumes->[$volume_idx]->transformed_bounding_box;
                     $volume_bbox->offset(1.);
@@ -948,6 +956,9 @@ sub mulquats {
 sub mouse_to_3d {
     my ($self, $x, $y, $z) = @_;
 
+    return unless $self->GetContext;
+    $self->SetCurrent($self->GetContext);
+
     my @viewport    = glGetIntegerv_p(GL_VIEWPORT);             # 4 items
     my @mview       = glGetDoublev_p(GL_MODELVIEW_MATRIX);      # 16 items
     my @proj        = glGetDoublev_p(GL_PROJECTION_MATRIX);     # 16 items
@@ -1296,11 +1307,16 @@ sub Render {
     }
     
     glEnable(GL_LIGHTING);
-    
+        
     # draw objects
     if (! $self->use_plain_shader) {
         $self->draw_volumes;
     } elsif ($self->UseVBOs) {
+        if ($self->enable_picking) {
+            $self->mark_volumes_for_layer_height;
+            $self->volumes->set_print_box($self->bed_bounding_box->x_min, $self->bed_bounding_box->y_min, 0.0, $self->bed_bounding_box->x_max, $self->bed_bounding_box->y_max, $self->{config}->get('max_print_height'));
+            $self->volumes->update_outside_state($self->{config}, 0);
+        }
         $self->{plain_shader}->enable if $self->{plain_shader};
         $self->volumes->render_VBOs;
         $self->{plain_shader}->disable;
@@ -1327,6 +1343,9 @@ sub Render {
         glDisable(GL_BLEND);
     }
 
+    # draw warning message
+    $self->draw_warning;
+    
     # draw gcode preview legend
     $self->draw_legend;
     
@@ -1345,36 +1364,10 @@ sub draw_volumes {
     glEnableClientState(GL_VERTEX_ARRAY);
     glEnableClientState(GL_NORMAL_ARRAY);
     
-    my $z_cursor_relative = $self->_variable_layer_thickness_bar_mouse_cursor_z_relative;
     foreach my $volume_idx (0..$#{$self->volumes}) {
         my $volume = $self->volumes->[$volume_idx];
 
-        my $shader_active = 0;
-        my $object_id = int($volume->select_group_id / 1000000);
-        if ($self->layer_editing_enabled && ! $fakecolor && $volume->selected && $self->{layer_height_edit_shader} && 
-            $volume->has_layer_height_texture && $object_id < $self->{print}->object_count) {
-            # Update the height texture if the ModelObject::layer_height_texture is invalid.
-            $volume->generate_layer_height_texture($self->{print}->get_object($object_id), 0);
-            $self->{layer_height_edit_shader}->enable;
-            $self->{layer_height_edit_shader}->set_uniform('z_to_texture_row',            $volume->layer_height_texture_z_to_row_id);
-            $self->{layer_height_edit_shader}->set_uniform('z_texture_row_to_normalized', 1. / $volume->layer_height_texture_height);
-            $self->{layer_height_edit_shader}->set_uniform('z_cursor',                    $volume->bounding_box->z_max * $z_cursor_relative);
-            $self->{layer_height_edit_shader}->set_uniform('z_cursor_band_width',         $self->{layer_height_edit_band_width});
-            glBindTexture(GL_TEXTURE_2D, $self->{layer_preview_z_texture_id});
-#            glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_LEVEL, 0);
-#            glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAX_LEVEL, 1);
-            glTexImage2D_c(GL_TEXTURE_2D, 0, GL_RGBA8, $volume->layer_height_texture_width, $volume->layer_height_texture_height, 
-                0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
-            glTexImage2D_c(GL_TEXTURE_2D, 1, GL_RGBA8, $volume->layer_height_texture_width / 2, $volume->layer_height_texture_height / 2,
-                0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
-#                glPixelStorei(GL_UNPACK_ALIGNMENT, 1);
-#                glPixelStorei(GL_UNPACK_ROW_LENGTH, $self->{layer_preview_z_texture_width});
-            glTexSubImage2D_c(GL_TEXTURE_2D, 0, 0, 0, $volume->layer_height_texture_width, $volume->layer_height_texture_height,
-                GL_RGBA, GL_UNSIGNED_BYTE, $volume->layer_height_texture_data_ptr_level0);
-            glTexSubImage2D_c(GL_TEXTURE_2D, 1, 0, 0, $volume->layer_height_texture_width / 2, $volume->layer_height_texture_height / 2,
-                GL_RGBA, GL_UNSIGNED_BYTE, $volume->layer_height_texture_data_ptr_level1);
-            $shader_active = 1;
-        } elsif ($fakecolor) {
+        if ($fakecolor) {
             # Object picking mode. Render the object with a color encoding the object index.
             my $r = ($volume_idx & 0x000000FF) >>  0;
             my $g = ($volume_idx & 0x0000FF00) >>  8;
@@ -1389,11 +1382,6 @@ sub draw_volumes {
         }
 
         $volume->render;
-
-        if ($shader_active) {
-            glBindTexture(GL_TEXTURE_2D, 0);
-            $self->{layer_height_edit_shader}->disable;
-        }
     }
     glDisableClientState(GL_NORMAL_ARRAY);
     glDisable(GL_BLEND);
@@ -1408,6 +1396,22 @@ sub draw_volumes {
     glDisableClientState(GL_VERTEX_ARRAY);
 }
 
+sub mark_volumes_for_layer_height {
+    my ($self) = @_;
+    
+    foreach my $volume_idx (0..$#{$self->volumes}) {
+        my $volume = $self->volumes->[$volume_idx];
+        my $object_id = int($volume->select_group_id / 1000000);
+        if ($self->layer_editing_enabled && $volume->selected && $self->{layer_height_edit_shader} && 
+            $volume->has_layer_height_texture && $object_id < $self->{print}->object_count) {
+            $volume->set_layer_height_texture_data($self->{layer_preview_z_texture_id}, $self->{layer_height_edit_shader}->shader_program_id,
+                $self->{print}->get_object($object_id), $self->_variable_layer_thickness_bar_mouse_cursor_z_relative, $self->{layer_height_edit_band_width});
+        } else {
+            $volume->reset_layer_height_texture_data();
+        }
+    }
+}
+
 sub _load_image_set_texture {
     my ($self, $file_name) = @_;
     # Load a PNG with an alpha channel.
@@ -1599,31 +1603,65 @@ sub draw_active_object_annotations {
 sub draw_legend {
     my ($self) = @_;
  
-    if ($self->_legend_enabled)
-    {
-        # If the legend texture has not been loaded into the GPU, do it now.
-        my $tex_id = Slic3r::GUI::_3DScene::finalize_legend_texture;
-        if ($tex_id > 0)
-        {
-            my $tex_w = Slic3r::GUI::_3DScene::get_legend_texture_width;
-            my $tex_h = Slic3r::GUI::_3DScene::get_legend_texture_height;
-            if (($tex_w > 0) && ($tex_h > 0))
-            {
-                glDisable(GL_DEPTH_TEST);
-                glPushMatrix();
-                glLoadIdentity();
-        
-                my ($cw, $ch) = $self->GetSizeWH;
-                
-                my $l = (-0.5 * $cw) / $self->_zoom;
-                my $t = (0.5 * $ch) / $self->_zoom;
-                my $r = $l + $tex_w / $self->_zoom;
-                my $b = $t - $tex_h / $self->_zoom;
-                $self->_render_texture($tex_id, $l, $r, $b, $t);
+    if (!$self->_legend_enabled) {
+        return;
+    }
 
-                glPopMatrix();
-                glEnable(GL_DEPTH_TEST);
-            }
+    # If the legend texture has not been loaded into the GPU, do it now.
+    my $tex_id = Slic3r::GUI::_3DScene::finalize_legend_texture;
+    if ($tex_id > 0)
+    {
+        my $tex_w = Slic3r::GUI::_3DScene::get_legend_texture_width;
+        my $tex_h = Slic3r::GUI::_3DScene::get_legend_texture_height;
+        if (($tex_w > 0) && ($tex_h > 0))
+        {
+            glDisable(GL_DEPTH_TEST);
+            glPushMatrix();
+            glLoadIdentity();
+
+            my ($cw, $ch) = $self->GetSizeWH;
+
+            my $l = (-0.5 * $cw) / $self->_zoom;
+            my $t = (0.5 * $ch) / $self->_zoom;
+            my $r = $l + $tex_w / $self->_zoom;
+            my $b = $t - $tex_h / $self->_zoom;
+            $self->_render_texture($tex_id, $l, $r, $b, $t);
+
+            glPopMatrix();
+            glEnable(GL_DEPTH_TEST);
+        }
+    }
+}
+
+sub draw_warning {
+    my ($self) = @_;
+ 
+    if (!$self->_warning_enabled) {
+        return;
+    }
+
+    # If the warning texture has not been loaded into the GPU, do it now.
+    my $tex_id = Slic3r::GUI::_3DScene::finalize_warning_texture;
+    if ($tex_id > 0)
+    {
+        my $tex_w = Slic3r::GUI::_3DScene::get_warning_texture_width;
+        my $tex_h = Slic3r::GUI::_3DScene::get_warning_texture_height;
+        if (($tex_w > 0) && ($tex_h > 0))
+        {
+            glDisable(GL_DEPTH_TEST);
+            glPushMatrix();
+            glLoadIdentity();
+        
+            my ($cw, $ch) = $self->GetSizeWH;
+                
+            my $l = (-0.5 * $tex_w) / $self->_zoom;
+            my $t = (-0.5 * $ch + $tex_h) / $self->_zoom;
+            my $r = $l + $tex_w / $self->_zoom;
+            my $b = $t - $tex_h / $self->_zoom;
+            $self->_render_texture($tex_id, $l, $r, $b, $t);
+
+            glPopMatrix();
+            glEnable(GL_DEPTH_TEST);
         }
     }
 }
@@ -1692,57 +1730,77 @@ sub _vertex_shader_Gouraud {
     return <<'VERTEX';
 #version 110
 
-#define INTENSITY_CORRECTION 0.7
+#define INTENSITY_CORRECTION 0.6
 
-#define LIGHT_TOP_DIR        -0.6/1.31, 0.6/1.31, 1./1.31
+// normalized values for (-0.6/1.31, 0.6/1.31, 1./1.31)
+const vec3 LIGHT_TOP_DIR = vec3(-0.4574957, 0.4574957, 0.7624929);
 #define LIGHT_TOP_DIFFUSE    (0.8 * INTENSITY_CORRECTION)
-#define LIGHT_TOP_SPECULAR   (0.5 * INTENSITY_CORRECTION)
-#define LIGHT_TOP_SHININESS  50.
+#define LIGHT_TOP_SPECULAR   (0.25 * INTENSITY_CORRECTION)
+#define LIGHT_TOP_SHININESS  200.0
 
-#define LIGHT_FRONT_DIR      1./1.43, 0.2/1.43, 1./1.43
+// normalized values for (1./1.43, 0.2/1.43, 1./1.43)
+const vec3 LIGHT_FRONT_DIR = vec3(0.6985074, 0.1397015, 0.6985074);
 #define LIGHT_FRONT_DIFFUSE  (0.3 * INTENSITY_CORRECTION)
-#define LIGHT_FRONT_SPECULAR (0.0 * INTENSITY_CORRECTION)
-#define LIGHT_FRONT_SHININESS 50.
+//#define LIGHT_FRONT_SPECULAR (0.0 * INTENSITY_CORRECTION)
+//#define LIGHT_FRONT_SHININESS 5.0
 
 #define INTENSITY_AMBIENT    0.3
 
-varying float intensity_specular;
-varying float intensity_tainted;
+const vec3 ZERO = vec3(0.0, 0.0, 0.0);
+
+struct PrintBoxDetection
+{
+    vec3 min;
+    vec3 max;
+    // xyz contains the offset, if w == 1.0 detection needs to be performed
+    vec4 volume_origin;
+};
+
+uniform PrintBoxDetection print_box;
+
+// x = tainted, y = specular;
+varying vec2 intensity;
+
+varying vec3 delta_box_min;
+varying vec3 delta_box_max;
 
 void main()
 {
-    vec3 eye, normal, lightDir, viewVector, halfVector;
-    float NdotL, NdotHV;
+    vec3 eye = -normalize((gl_ModelViewMatrix * gl_Vertex).xyz);
 
-    eye = vec3(0., 0., 1.);
-
-    // First transform the normal into eye space and normalize the result.
-    normal = normalize(gl_NormalMatrix * gl_Normal);
+    // First transform the normal into camera space and normalize the result.
+    vec3 normal = normalize(gl_NormalMatrix * gl_Normal);
     
     // Now normalize the light's direction. Note that according to the OpenGL specification, the light is stored in eye space. 
     // Also since we're talking about a directional light, the position field is actually direction.
-    lightDir = vec3(LIGHT_TOP_DIR);
-    halfVector = normalize(lightDir + eye);
+    vec3 halfVector = normalize(LIGHT_TOP_DIR + eye);
     
     // Compute the cos of the angle between the normal and lights direction. The light is directional so the direction is constant for every vertex.
     // Since these two are normalized the cosine is the dot product. We also need to clamp the result to the [0,1] range.
-    NdotL = max(dot(normal, lightDir), 0.0);
+    float NdotL = max(dot(normal, LIGHT_TOP_DIR), 0.0);
 
-    intensity_tainted = INTENSITY_AMBIENT + NdotL * LIGHT_TOP_DIFFUSE;
-    intensity_specular = 0.;
+    intensity.x = INTENSITY_AMBIENT + NdotL * LIGHT_TOP_DIFFUSE;
+    intensity.y = 0.0;
 
     if (NdotL > 0.0)
-        intensity_specular = LIGHT_TOP_SPECULAR * pow(max(dot(normal, halfVector), 0.0), LIGHT_TOP_SHININESS);
+        intensity.y += LIGHT_TOP_SPECULAR * pow(max(dot(normal, halfVector), 0.0), LIGHT_TOP_SHININESS);
 
-    // Perform the same lighting calculation for the 2nd light source.
-    lightDir = vec3(LIGHT_FRONT_DIR);
-//    halfVector = normalize(lightDir + eye);
-    NdotL = max(dot(normal, lightDir), 0.0);
-    intensity_tainted += NdotL * LIGHT_FRONT_DIFFUSE;
+    // Perform the same lighting calculation for the 2nd light source (no specular applied).
+    NdotL = max(dot(normal, LIGHT_FRONT_DIR), 0.0);
+    intensity.x += NdotL * LIGHT_FRONT_DIFFUSE;
 
-    // compute the specular term if NdotL is larger than zero
-//    if (NdotL > 0.0)
-//        intensity_specular += LIGHT_FRONT_SPECULAR * pow(max(dot(normal, halfVector), 0.0), LIGHT_FRONT_SHININESS);
+    // compute deltas for out of print volume detection (world coordinates)
+    if (print_box.volume_origin.w == 1.0)
+    {
+        vec3 v = gl_Vertex.xyz + print_box.volume_origin.xyz;
+        delta_box_min = v - print_box.min;
+        delta_box_max = v - print_box.max;
+    }
+    else
+    {
+        delta_box_min = ZERO;
+        delta_box_max = ZERO;
+    }    
 
     gl_Position = ftransform();
 } 
@@ -1754,16 +1812,25 @@ sub _fragment_shader_Gouraud {
     return <<'FRAGMENT';
 #version 110
 
-varying float intensity_specular;
-varying float intensity_tainted;
+const vec3 ZERO = vec3(0.0, 0.0, 0.0);
+
+// x = tainted, y = specular;
+varying vec2 intensity;
+
+varying vec3 delta_box_min;
+varying vec3 delta_box_max;
 
 uniform vec4 uniform_color;
 
 void main()
 {
-    gl_FragColor = 
-        vec4(intensity_specular, intensity_specular, intensity_specular, 0.) + uniform_color * intensity_tainted;
-    gl_FragColor.a = uniform_color.a;
+    gl_FragColor = vec4(intensity.y, intensity.y, intensity.y, 0.0) + uniform_color * intensity.x;
+
+    // if the fragment is outside the print volume darken it and set it as transparent
+    if (any(lessThan(delta_box_min, ZERO)) || any(greaterThan(delta_box_max, ZERO)))
+        gl_FragColor = vec4(mix(gl_FragColor.xyz, ZERO, 0.5), 0.5 * uniform_color.a);
+    else
+        gl_FragColor.a = uniform_color.a;
 }
 
 FRAGMENT
@@ -1828,6 +1895,7 @@ void main() {
         // compute the specular term into spec
 //        intensity_specular += LIGHT_FRONT_SPECULAR * pow(max(dot(h,normal), 0.0), LIGHT_FRONT_SHININESS);
     }
+    
     gl_FragColor = max(
         vec4(intensity_specular, intensity_specular, intensity_specular, 0.) + uniform_color * intensity_tainted, 
         INTENSITY_AMBIENT * uniform_color);
@@ -1840,61 +1908,55 @@ sub _vertex_shader_variable_layer_height {
     return <<'VERTEX';
 #version 110
 
-#define LIGHT_TOP_DIR        0., 1., 0.
-#define LIGHT_TOP_DIFFUSE    0.2
-#define LIGHT_TOP_SPECULAR   0.3
-#define LIGHT_TOP_SHININESS  50.
+#define INTENSITY_CORRECTION 0.6
 
-#define LIGHT_FRONT_DIR      0., 0., 1.
-#define LIGHT_FRONT_DIFFUSE  0.5
-#define LIGHT_FRONT_SPECULAR 0.3
-#define LIGHT_FRONT_SHININESS 50.
+const vec3 LIGHT_TOP_DIR = vec3(-0.4574957, 0.4574957, 0.7624929);
+#define LIGHT_TOP_DIFFUSE    (0.8 * INTENSITY_CORRECTION)
+#define LIGHT_TOP_SPECULAR   (0.25 * INTENSITY_CORRECTION)
+#define LIGHT_TOP_SHININESS  200.0
 
-#define INTENSITY_AMBIENT    0.1
+const vec3 LIGHT_FRONT_DIR = vec3(0.6985074, 0.1397015, 0.6985074);
+#define LIGHT_FRONT_DIFFUSE  (0.3 * INTENSITY_CORRECTION)
+//#define LIGHT_FRONT_SPECULAR (0.0 * INTENSITY_CORRECTION)
+//#define LIGHT_FRONT_SHININESS 5.0
+
+#define INTENSITY_AMBIENT    0.3
 
 uniform float z_to_texture_row;
-varying float intensity_specular;
-varying float intensity_tainted;
+
+// x = tainted, y = specular;
+varying vec2 intensity;
+
 varying float object_z;
 
 void main()
 {
-    vec3 eye, normal, lightDir, viewVector, halfVector;
-    float NdotL, NdotHV;
+    vec3 eye = -normalize((gl_ModelViewMatrix * gl_Vertex).xyz);
 
-//    eye = gl_ModelViewMatrixInverse[3].xyz;
-    eye = vec3(0., 0., 1.);
-
-    // First transform the normal into eye space and normalize the result.
-    normal = normalize(gl_NormalMatrix * gl_Normal);
+    // First transform the normal into camera space and normalize the result.
+    vec3 normal = normalize(gl_NormalMatrix * gl_Normal);
     
     // Now normalize the light's direction. Note that according to the OpenGL specification, the light is stored in eye space. 
     // Also since we're talking about a directional light, the position field is actually direction.
-    lightDir = vec3(LIGHT_TOP_DIR);
-    halfVector = normalize(lightDir + eye);
+    vec3 halfVector = normalize(LIGHT_TOP_DIR + eye);
     
     // Compute the cos of the angle between the normal and lights direction. The light is directional so the direction is constant for every vertex.
     // Since these two are normalized the cosine is the dot product. We also need to clamp the result to the [0,1] range.
-    NdotL = max(dot(normal, lightDir), 0.0);
+    float NdotL = max(dot(normal, LIGHT_TOP_DIR), 0.0);
 
-    intensity_tainted = INTENSITY_AMBIENT + NdotL * LIGHT_TOP_DIFFUSE;
-    intensity_specular = 0.;
+    intensity.x = INTENSITY_AMBIENT + NdotL * LIGHT_TOP_DIFFUSE;
+    intensity.y = 0.0;
 
-//    if (NdotL > 0.0)
-//        intensity_specular = LIGHT_TOP_SPECULAR * pow(max(dot(normal, halfVector), 0.0), LIGHT_TOP_SHININESS);
-
-    // Perform the same lighting calculation for the 2nd light source.
-    lightDir = vec3(LIGHT_FRONT_DIR);
-    halfVector = normalize(lightDir + eye);
-    NdotL = max(dot(normal, lightDir), 0.0);
-    intensity_tainted += NdotL * LIGHT_FRONT_DIFFUSE;
-    
-    // compute the specular term if NdotL is larger than zero
     if (NdotL > 0.0)
-        intensity_specular += LIGHT_FRONT_SPECULAR * pow(max(dot(normal, halfVector), 0.0), LIGHT_FRONT_SHININESS);
+        intensity.y += LIGHT_TOP_SPECULAR * pow(max(dot(normal, halfVector), 0.0), LIGHT_TOP_SHININESS);
 
+    // Perform the same lighting calculation for the 2nd light source (no specular)
+    NdotL = max(dot(normal, LIGHT_FRONT_DIR), 0.0);
+    
+    intensity.x += NdotL * LIGHT_FRONT_DIFFUSE;
+    
     // Scaled to widths of the Z texture.
-    object_z = gl_Vertex.z / gl_Vertex.w;
+    object_z = gl_Vertex.z;
 
     gl_Position = ftransform();
 } 
@@ -1913,13 +1975,14 @@ uniform sampler2D z_texture;
 // Scaling from the Z texture rows coordinate to the normalized texture row coordinate.
 uniform float z_to_texture_row;
 uniform float z_texture_row_to_normalized;
-
-varying float intensity_specular;
-varying float intensity_tainted;
-varying float object_z;
 uniform float z_cursor;
 uniform float z_cursor_band_width;
 
+// x = tainted, y = specular;
+varying vec2 intensity;
+
+varying float object_z;
+
 void main()
 {
     float object_z_row = z_to_texture_row * object_z;
@@ -1938,15 +2001,12 @@ void main()
     float lod           = clamp(0.5 * log2(max(dx_vtc*dx_vtc, dy_vtc*dy_vtc)), 0., 1.);
     // Sample the Z texture. Texture coordinates are normalized to <0, 1>.
     vec4 color       =
-        (1. - lod) * texture2D(z_texture, vec2(z_texture_col, z_texture_row_to_normalized * (z_texture_row + 0.5    )), -10000.) +
-        lod        * texture2D(z_texture, vec2(z_texture_col, z_texture_row_to_normalized * (z_texture_row * 2. + 1.)),  10000.);
+        mix(texture2D(z_texture, vec2(z_texture_col, z_texture_row_to_normalized * (z_texture_row + 0.5    )), -10000.),
+            texture2D(z_texture, vec2(z_texture_col, z_texture_row_to_normalized * (z_texture_row * 2. + 1.)),  10000.), lod);
+            
     // Mix the final color.
     gl_FragColor = 
-        vec4(intensity_specular, intensity_specular, intensity_specular, 1.) + 
-        (1. - z_blend) * intensity_tainted * color + 
-        z_blend * vec4(1., 1., 0., 0.);
-    // and reset the transparency.
-    gl_FragColor.a = 1.;
+        vec4(intensity.y, intensity.y, intensity.y, 1.0) +  intensity.x * mix(color, vec4(1.0, 1.0, 0.0, 1.0), z_blend);
 }
 
 FRAGMENT
diff --git a/lib/Slic3r/GUI/MainFrame.pm b/lib/Slic3r/GUI/MainFrame.pm
index 442d0abc9..4868ed7e2 100644
--- a/lib/Slic3r/GUI/MainFrame.pm
+++ b/lib/Slic3r/GUI/MainFrame.pm
@@ -25,10 +25,6 @@ our $last_config;
 our $VALUE_CHANGE_EVENT    = Wx::NewEventType;
 # 2) To inform about a preset selection change or a "modified" status change.
 our $PRESETS_CHANGED_EVENT = Wx::NewEventType;
-# 3) To inform about a click on Browse button
-our $BUTTON_BROWSE_EVENT   = Wx::NewEventType;
-# 4) To inform about a click on Test button
-our $BUTTON_TEST_EVENT     = Wx::NewEventType;
 
 sub new {
     my ($class, %params) = @_;
@@ -169,59 +165,7 @@ sub _init_tabpanel {
             }
         }
     });
-    # The following event is emited by the C++ Tab implementation ,
-    # when the Browse button was clicked
-    EVT_COMMAND($self, -1, $BUTTON_BROWSE_EVENT, sub {
-        my ($self, $event) = @_;
-        my $msg = $event->GetString;
-
-        # look for devices
-        my $entries;
-        {
-            my $res = Net::Bonjour->new('http');
-            $res->discover;
-            $entries = [ $res->entries ];
-        }
-        if (@{$entries}) {
-            my $dlg = Slic3r::GUI::BonjourBrowser->new($self, $entries);
-            my $tab = Slic3r::GUI::get_preset_tab("printer");
-            $tab->load_key_value('octoprint_host', $dlg->GetValue . ":" . $dlg->GetPort)
-                if $dlg->ShowModal == wxID_OK;
-        } else {
-            Wx::MessageDialog->new($self, L('No Bonjour device found'), L('Device Browser'), wxOK | wxICON_INFORMATION)->ShowModal;
-        }
-    });
-    # The following event is emited by the C++ Tab implementation ,
-    # when the Test button was clicked
-    EVT_COMMAND($self, -1, $BUTTON_TEST_EVENT, sub {
-        my ($self, $event) = @_;
-        my $msg = $event->GetString;
-
-        my $ua = LWP::UserAgent->new;
-        $ua->timeout(10);
-
-        my $config = Slic3r::GUI::get_preset_tab("printer")->get_config;
-        my $res = $ua->get(
-            "http://" . $config->octoprint_host . "/api/version",
-            'X-Api-Key' => $config->octoprint_apikey,
-        );
-        if ($res->is_success) {
-            Slic3r::GUI::show_info($self, L("Connection to OctoPrint works correctly."), _L("Success!"));
-        } else {
-            Slic3r::GUI::show_error($self,
-                L("I wasn't able to connect to OctoPrint (") . $res->status_line . 
-                L("). Check hostname and OctoPrint version (at least 1.1.0 is required)."));
-        }
-    });
-    # A variable to inform C++ Tab implementation about disabling of Browse button
-    $self->{is_disabled_button_browse} = (!eval "use Net::Bonjour; 1") ? 1 : 0 ;
-    # A variable to inform C++ Tab implementation about user_agent
-    $self->{is_user_agent} = (eval "use LWP::UserAgent; 1") ? 1 : 0 ;    
-    Slic3r::GUI::create_preset_tabs(wxTheApp->{preset_bundle}, $self->{no_controller},
-                                    $self->{is_disabled_button_browse},
-                                    $self->{is_user_agent},
-                                    $VALUE_CHANGE_EVENT, $PRESETS_CHANGED_EVENT,
-                                    $BUTTON_BROWSE_EVENT, $BUTTON_TEST_EVENT);
+    Slic3r::GUI::create_preset_tabs($self->{no_controller}, $VALUE_CHANGE_EVENT, $PRESETS_CHANGED_EVENT);
     $self->{options_tabs} = {};
     for my $tab_name (qw(print filament printer)) {
         $self->{options_tabs}{$tab_name} = Slic3r::GUI::get_preset_tab("$tab_name");
diff --git a/lib/Slic3r/GUI/Notifier.pm b/lib/Slic3r/GUI/Notifier.pm
deleted file mode 100644
index 54afffae0..000000000
--- a/lib/Slic3r/GUI/Notifier.pm
+++ /dev/null
@@ -1,46 +0,0 @@
-# Notify about the end of slicing.
-# The notifications are sent out using the Growl protocol if installed, and using DBus XWindow protocol.
-
-package Slic3r::GUI::Notifier;
-use Moo;
-
-has 'growler' => (is => 'rw');
-
-my $icon = Slic3r::var("Slic3r.png");
-
-sub BUILD {
-    my ($self) = @_;
-    
-    if (eval 'use Growl::GNTP; 1') {
-        # register with growl
-        eval {
-            $self->growler(Growl::GNTP->new(AppName => 'Slic3r', AppIcon => $icon));
-            $self->growler->register([{Name => 'SKEIN_DONE', DisplayName => 'Slicing Done'}]);
-        };
-        # if register() fails (for example because of a timeout), disable growler at all
-        $self->growler(undef) if $@;
-    }
-}
-
-sub notify {
-    my ($self, $message) = @_;
-    my $title = 'Slicing Done!';
-
-    eval {
-        $self->growler->notify(Event => 'SKEIN_DONE', Title => $title, Message => $message)
-            if $self->growler;
-    };
-    # Net::DBus is broken in multithreaded environment
-    if (0 && eval 'use Net::DBus; 1') {
-        eval {
-            my $session = Net::DBus->session;
-            my $serv = $session->get_service('org.freedesktop.Notifications');
-            my $notifier = $serv->get_object('/org/freedesktop/Notifications',
-                                             'org.freedesktop.Notifications');
-            $notifier->Notify('Slic3r', 0, $icon, $title, $message, [], {}, -1);
-            undef $Net::DBus::bus_session;
-        };
-    }
-}
-
-1;
diff --git a/lib/Slic3r/GUI/Plater.pm b/lib/Slic3r/GUI/Plater.pm
index 09f8adfb5..08212c165 100644
--- a/lib/Slic3r/GUI/Plater.pm
+++ b/lib/Slic3r/GUI/Plater.pm
@@ -8,7 +8,6 @@ use utf8;
 use File::Basename qw(basename dirname);
 use List::Util qw(sum first max);
 use Slic3r::Geometry qw(X Y Z scale unscale deg2rad rad2deg);
-use LWP::UserAgent;
 use threads::shared qw(shared_clone);
 use Wx qw(:button :colour :cursor :dialog :filedialog :keycode :icon :font :id :listctrl :misc 
     :panel :sizer :toolbar :window wxTheApp :notebook :combobox wxNullBitmap);
@@ -53,8 +52,9 @@ sub new {
     $self->{config} = Slic3r::Config::new_from_defaults_keys([qw(
         bed_shape complete_objects extruder_clearance_radius skirts skirt_distance brim_width variable_layer_height
         serial_port serial_speed octoprint_host octoprint_apikey octoprint_cafile
-        nozzle_diameter single_extruder_multi_material 
-        wipe_tower wipe_tower_x wipe_tower_y wipe_tower_width wipe_tower_per_color_wipe wipe_tower_rotation_angle extruder_colour filament_colour
+        nozzle_diameter single_extruder_multi_material wipe_tower wipe_tower_x wipe_tower_y wipe_tower_width
+	wipe_tower_per_color_wipe wipe_tower_rotation_angle extruder_colour filament_colour
+        max_print_height
     )]);
     # C++ Slic3r::Model with Perl extensions in Slic3r/Model.pm
     $self->{model} = Slic3r::Model->new;
@@ -113,6 +113,7 @@ sub new {
         $self->{canvas3D}->set_on_decrease_objects(sub { $self->decrease() });
         $self->{canvas3D}->set_on_remove_object(sub { $self->remove() });
         $self->{canvas3D}->set_on_instances_moved($on_instances_moved);
+        $self->{canvas3D}->use_plain_shader(1);
         $self->{canvas3D}->set_on_wipe_tower_moved(sub {
             my ($new_pos_3f) = @_;
             my $cfg = Slic3r::Config->new;
@@ -389,9 +390,12 @@ sub new {
                     });
                 });
                 $presets->Add($text, 0, wxALIGN_RIGHT | wxALIGN_CENTER_VERTICAL | wxRIGHT, 4);
-                $presets->Add($choice, 1, wxALIGN_CENTER_VERTICAL | wxEXPAND | wxBOTTOM, 0);
+                $presets->Add($choice, 1, wxALIGN_CENTER_VERTICAL | wxEXPAND | wxBOTTOM, 1);
             }
         }
+
+        my $frequently_changed_parameters_sizer = Wx::BoxSizer->new(wxHORIZONTAL);
+        Slic3r::GUI::add_frequently_changed_parameters($self, $frequently_changed_parameters_sizer, $presets);
         
         my $object_info_sizer;
         {
@@ -473,14 +477,15 @@ sub new {
         
         my $right_sizer = Wx::BoxSizer->new(wxVERTICAL);
         $right_sizer->Add($presets, 0, wxEXPAND | wxTOP, 10) if defined $presets;
+        $right_sizer->Add($frequently_changed_parameters_sizer, 0, wxEXPAND | wxTOP, 10) if defined $frequently_changed_parameters_sizer;
         $right_sizer->Add($buttons_sizer, 0, wxEXPAND | wxBOTTOM, 5);
         $right_sizer->Add($self->{list}, 1, wxEXPAND, 5);
         $right_sizer->Add($object_info_sizer, 0, wxEXPAND, 0);
         $right_sizer->Add($print_info_sizer, 0, wxEXPAND, 0);
         # Callback for showing / hiding the print info box.
         $self->{"print_info_box_show"} = sub {
-            if ($right_sizer->IsShown(4) != $_[0]) { 
-                $right_sizer->Show(4, $_[0]); 
+            if ($right_sizer->IsShown(5) != $_[0]) { 
+                $right_sizer->Show(5, $_[0]); 
                 $self->Layout
             }
         };
@@ -1737,6 +1742,8 @@ sub on_config_change {
             $update_scheduled = 1;
             my $extruder_colors = $config->get('extruder_colour');
             $self->{preview3D}->set_number_extruders(scalar(@{$extruder_colors}));
+        } elsif ($opt_key eq 'max_print_height') {
+            $update_scheduled = 1;
         }
     }
 
@@ -1934,6 +1941,7 @@ sub selection_changed {
                     $self->{object_info_manifold_warning_icon}->SetToolTipString($message);
                 } else {
                     $self->{object_info_manifold}->SetLabel(L("Yes"));
+                    $self->{object_info_manifold_warning_icon}->Hide;
                 }
             } else {
                 $self->{object_info_facets}->SetLabel($object->facets);
diff --git a/lib/Slic3r/GUI/Plater/3D.pm b/lib/Slic3r/GUI/Plater/3D.pm
index a97aa0776..bd823c730 100644
--- a/lib/Slic3r/GUI/Plater/3D.pm
+++ b/lib/Slic3r/GUI/Plater/3D.pm
@@ -8,6 +8,8 @@ use Wx qw(:misc :pen :brush :sizer :font :cursor :keycode wxTAB_TRAVERSAL);
 use Wx::Event qw(EVT_KEY_DOWN EVT_CHAR);
 use base qw(Slic3r::GUI::3DScene Class::Accessor);
 
+use Wx::Locale gettext => 'L';
+
 __PACKAGE__->mk_accessors(qw(
     on_arrange on_rotate_object_left on_rotate_object_right on_scale_object_uniformly
     on_remove_object on_increase_objects on_decrease_objects));
@@ -208,6 +210,19 @@ sub reload_scene {
                 $self->{model}->bounding_box->z_max, $self->{config}->wipe_tower_rotation_angle, $self->UseVBOs);
         }
     }
+    
+    # checks for geometry outside the print volume to render it accordingly
+    if (scalar @{$self->volumes} > 0)
+    {
+        if (!$self->{model}->fits_print_volume($self->{config})) {
+            $self->set_warning_enabled(1);
+            Slic3r::GUI::_3DScene::generate_warning_texture(L("Detected object outside print volume"));
+        } else {
+            $self->set_warning_enabled(0);
+            $self->volumes->update_outside_state($self->{config}, 1);
+            Slic3r::GUI::_3DScene::reset_warning_texture();
+        }
+    }
 }
 
 sub update_bed_size {
diff --git a/lib/Slic3r/GUI/Plater/3DPreview.pm b/lib/Slic3r/GUI/Plater/3DPreview.pm
index d86615218..8f3fa49f5 100644
--- a/lib/Slic3r/GUI/Plater/3DPreview.pm
+++ b/lib/Slic3r/GUI/Plater/3DPreview.pm
@@ -253,19 +253,19 @@ sub new {
     
     # sets colors for gcode preview extrusion roles
     my @extrusion_roles_colors = (
-                                    'Perimeter'                  => 'FFA500',
-                                    'External perimeter'         => 'FFFF66',
+                                    'Perimeter'                  => 'FFFF66',
+                                    'External perimeter'         => 'FFA500',
                                     'Overhang perimeter'         => '0000FF',
-                                    'Internal infill'            => 'FF0000',
-                                    'Solid infill'               => 'CD00CD',
-                                    'Top solid infill'           => 'FF3333',
+                                    'Internal infill'            => 'B1302A',
+                                    'Solid infill'               => 'D732D7',
+                                    'Top solid infill'           => 'FF1A1A',
                                     'Bridge infill'              => '9999FF',
                                     'Gap fill'                   => 'FFFFFF',
-                                    'Skirt'                      => '7F0000',
+                                    'Skirt'                      => '845321',
                                     'Support material'           => '00FF00',
                                     'Support material interface' => '008000',
                                     'Wipe tower'                 => 'B3E3AB',
-                                    'Custom'                     => 'FFFF00',
+                                    'Custom'                     => '28CC94',
                                  );
     $self->gcode_preview_data->set_extrusion_paths_colors(\@extrusion_roles_colors);
     
diff --git a/lib/Slic3r/Test.pm b/lib/Slic3r/Test.pm
index 53d6d1024..6471ae123 100644
--- a/lib/Slic3r/Test.pm
+++ b/lib/Slic3r/Test.pm
@@ -7,7 +7,6 @@ require Exporter;
 our @ISA = qw(Exporter);
 our @EXPORT_OK = qw(_eq);
 
-use IO::Scalar;
 use List::Util qw(first);
 use Slic3r::Geometry qw(epsilon X Y Z);
 
diff --git a/resources/icons/action_undo.png b/resources/icons/action_undo.png
new file mode 100644
index 000000000..866ae9773
Binary files /dev/null and b/resources/icons/action_undo.png differ
diff --git a/resources/icons/arrow_undo.png b/resources/icons/arrow_undo.png
new file mode 100644
index 000000000..6972c5e59
Binary files /dev/null and b/resources/icons/arrow_undo.png differ
diff --git a/resources/localization/Slic3rPE.pot b/resources/localization/Slic3rPE.pot
index b70c92257..0282e7aae 100644
--- a/resources/localization/Slic3rPE.pot
+++ b/resources/localization/Slic3rPE.pot
@@ -1,419 +1,389 @@
+# SOME DESCRIPTIVE TITLE.
+# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
+# This file is distributed under the same license as the PACKAGE package.
+# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
+#
+#, fuzzy
 msgid ""
 msgstr ""
-"Project-Id-Version: Slic3rPE\n"
+"Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2018-02-28 13:53+0100\n"
+"POT-Creation-Date: 2018-03-14 15:32+0100\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:39
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:39
 msgid "Shape"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:46
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:46
 msgid "Rectangular"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:50
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1191
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:408
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:50 xs/src/slic3r/GUI/Tab.cpp:1270
+#: lib/Slic3r/GUI/Plater.pm:411
 msgid "Size"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:51
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:51
 msgid "Size in X and Y of the rectangular plate."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:57
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:57
 msgid "Origin"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:58
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:58
 msgid ""
 "Distance of the 0,0 G-code coordinate from the front left corner of the "
 "rectangle."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:62
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:62
 msgid "Circular"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:65
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:129
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:200
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:211
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:325
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:336
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:355
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:434
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:781
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:801
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:860
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:878
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:896
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1044
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1052
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1094
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1103
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1113
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1121
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1129
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1215
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1421
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1491
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1527
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1704
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1711
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1718
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1727
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1737
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1747
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:65 xs/src/libslic3r/PrintConfig.cpp:129
+#: xs/src/libslic3r/PrintConfig.cpp:200 xs/src/libslic3r/PrintConfig.cpp:211
+#: xs/src/libslic3r/PrintConfig.cpp:325 xs/src/libslic3r/PrintConfig.cpp:336
+#: xs/src/libslic3r/PrintConfig.cpp:355 xs/src/libslic3r/PrintConfig.cpp:434
+#: xs/src/libslic3r/PrintConfig.cpp:781 xs/src/libslic3r/PrintConfig.cpp:801
+#: xs/src/libslic3r/PrintConfig.cpp:860 xs/src/libslic3r/PrintConfig.cpp:878
+#: xs/src/libslic3r/PrintConfig.cpp:896 xs/src/libslic3r/PrintConfig.cpp:1051
+#: xs/src/libslic3r/PrintConfig.cpp:1059 xs/src/libslic3r/PrintConfig.cpp:1101
+#: xs/src/libslic3r/PrintConfig.cpp:1110 xs/src/libslic3r/PrintConfig.cpp:1120
+#: xs/src/libslic3r/PrintConfig.cpp:1128 xs/src/libslic3r/PrintConfig.cpp:1136
+#: xs/src/libslic3r/PrintConfig.cpp:1222 xs/src/libslic3r/PrintConfig.cpp:1428
+#: xs/src/libslic3r/PrintConfig.cpp:1498 xs/src/libslic3r/PrintConfig.cpp:1534
+#: xs/src/libslic3r/PrintConfig.cpp:1711 xs/src/libslic3r/PrintConfig.cpp:1718
+#: xs/src/libslic3r/PrintConfig.cpp:1725 xs/src/libslic3r/PrintConfig.cpp:1734
+#: xs/src/libslic3r/PrintConfig.cpp:1744 xs/src/libslic3r/PrintConfig.cpp:1754
 msgid "mm"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:66
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:431
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:66 xs/src/libslic3r/PrintConfig.cpp:431
 msgid "Diameter"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:67
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:67
 msgid ""
 "Diameter of the print bed. It is assumed that origin (0,0) is located in the "
 "center."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:71
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:150
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:92
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:71
+#: xs/src/libslic3r/GCode/PreviewData.cpp:150
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:92
 msgid "Custom"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:75
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:75
 msgid "Load shape from STL..."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:120
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:120
 msgid "Settings"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:298
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:298
 msgid "Choose a file to import bed shape from (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:315
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:315
 msgid "Error! "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:324
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:324
 msgid "The selected file contains no geometry."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.cpp:328
+#: xs/src/slic3r/GUI/BedShapeDialog.cpp:328
 msgid ""
 "The selected file contains several disjoint areas. This is not supported."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\BedShapeDialog.hpp:42
+#: xs/src/slic3r/GUI/BedShapeDialog.hpp:42
 msgid "Bed Shape"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:224
+#: xs/src/slic3r/GUI/GUI.cpp:234
 msgid "Array of language names and identifiers should have the same size."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:235
+#: xs/src/slic3r/GUI/GUI.cpp:245
 msgid "Select the language"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:235
+#: xs/src/slic3r/GUI/GUI.cpp:245
 msgid "Language"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:300
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:170
+#: xs/src/slic3r/GUI/GUI.cpp:312 xs/src/libslic3r/PrintConfig.cpp:170
 msgid "Default"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:325
+#: xs/src/slic3r/GUI/GUI.cpp:337
 msgid "Change Application Language"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:332
+#: xs/src/slic3r/GUI/GUI.cpp:344
 msgid "Application will be restarted"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:332
+#: xs/src/slic3r/GUI/GUI.cpp:344
 msgid "Attention!"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:339
+#: xs/src/slic3r/GUI/GUI.cpp:351
 msgid "&Localization"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:488
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:470
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1300
+#: xs/src/slic3r/GUI/GUI.cpp:494 lib/Slic3r/GUI/MainFrame.pm:465
+#: lib/Slic3r/GUI/Plater.pm:1304
 msgid "Error"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:493
+#: xs/src/slic3r/GUI/GUI.cpp:499
 msgid "Notice"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:498
+#: xs/src/slic3r/GUI/GUI.cpp:504
 msgid "GLUquadricObjPtr | Attempt to free unreferenced scalar"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\GUI.cpp:500
+#: xs/src/slic3r/GUI/GUI.cpp:506
 msgid "Warning"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:50
-msgid "Save current "
+#: xs/src/slic3r/GUI/GUI.cpp:655
+msgid "Support"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:51
-msgid "Delete this preset"
+#: xs/src/slic3r/GUI/GUI.cpp:658
+msgid "Select what kind of support do you need"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:313
-msgid "Layers and perimeters"
+#: xs/src/slic3r/GUI/GUI.cpp:659 xs/src/libslic3r/GCode/PreviewData.cpp:137
+msgid "None"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:314
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:777
-msgid "Layer height"
+#: xs/src/slic3r/GUI/GUI.cpp:660 xs/src/libslic3r/PrintConfig.cpp:1415
+msgid "Support on build plate only"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:318
-msgid "Vertical shells"
+#: xs/src/slic3r/GUI/GUI.cpp:661
+msgid "Everywhere"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:329
-msgid "Horizontal shells"
-msgstr ""
-
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:330
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1314
-msgid "Solid layers"
-msgstr ""
-
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:335
-msgid "Quality (slower slicing)"
-msgstr ""
-
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:342
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:356
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:449
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:452
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:831
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1113
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:107
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:208
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:736
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1733
-msgid "Advanced"
-msgstr ""
-
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:346
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:347
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:664
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:87
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:247
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:488
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:502
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:540
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:681
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:691
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:709
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:727
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:746
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1263
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1280
-msgid "Infill"
-msgstr ""
-
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:352
-msgid "Reducing printing time"
-msgstr ""
-
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:364
-msgid "Skirt and brim"
-msgstr ""
-
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:365
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:146
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:88
-msgid "Skirt"
-msgstr ""
-
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:371
+#: xs/src/slic3r/GUI/GUI.cpp:673 xs/src/slic3r/GUI/Tab.cpp:441
 msgid "Brim"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:374
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:375
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:191
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1030
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1380
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1387
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1399
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1409
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1417
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1432
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1453
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1464
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1480
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1489
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1498
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1509
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1525
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1533
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1534
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1543
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1551
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1565
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:147
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:89
+#: xs/src/slic3r/GUI/GUI.cpp:675
+msgid ""
+"This flag enables the brim that will be printed around each object on the "
+"first layer."
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:57
+msgid "Save current "
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:58
+msgid "Delete this preset"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:383
+msgid "Layers and perimeters"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:384 xs/src/libslic3r/PrintConfig.cpp:777
+msgid "Layer height"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:388
+msgid "Vertical shells"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:399
+msgid "Horizontal shells"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:400 xs/src/libslic3r/PrintConfig.cpp:1321
+msgid "Solid layers"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:405
+msgid "Quality (slower slicing)"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:412 xs/src/slic3r/GUI/Tab.cpp:426
+#: xs/src/slic3r/GUI/Tab.cpp:519 xs/src/slic3r/GUI/Tab.cpp:522
+#: xs/src/slic3r/GUI/Tab.cpp:905 xs/src/slic3r/GUI/Tab.cpp:1191
+#: xs/src/libslic3r/PrintConfig.cpp:107 xs/src/libslic3r/PrintConfig.cpp:208
+#: xs/src/libslic3r/PrintConfig.cpp:736 xs/src/libslic3r/PrintConfig.cpp:1740
+msgid "Advanced"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:416 xs/src/slic3r/GUI/Tab.cpp:417
+#: xs/src/slic3r/GUI/Tab.cpp:735 xs/src/libslic3r/PrintConfig.cpp:87
+#: xs/src/libslic3r/PrintConfig.cpp:247 xs/src/libslic3r/PrintConfig.cpp:488
+#: xs/src/libslic3r/PrintConfig.cpp:502 xs/src/libslic3r/PrintConfig.cpp:540
+#: xs/src/libslic3r/PrintConfig.cpp:681 xs/src/libslic3r/PrintConfig.cpp:691
+#: xs/src/libslic3r/PrintConfig.cpp:709 xs/src/libslic3r/PrintConfig.cpp:727
+#: xs/src/libslic3r/PrintConfig.cpp:746 xs/src/libslic3r/PrintConfig.cpp:1270
+#: xs/src/libslic3r/PrintConfig.cpp:1287
+msgid "Infill"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:422
+msgid "Reducing printing time"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:434
+msgid "Skirt and brim"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:435 xs/src/libslic3r/GCode/PreviewData.cpp:146
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:88
+msgid "Skirt"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:444 xs/src/slic3r/GUI/Tab.cpp:445
+#: xs/src/libslic3r/PrintConfig.cpp:191 xs/src/libslic3r/PrintConfig.cpp:1037
+#: xs/src/libslic3r/PrintConfig.cpp:1387 xs/src/libslic3r/PrintConfig.cpp:1394
+#: xs/src/libslic3r/PrintConfig.cpp:1406 xs/src/libslic3r/PrintConfig.cpp:1416
+#: xs/src/libslic3r/PrintConfig.cpp:1424 xs/src/libslic3r/PrintConfig.cpp:1439
+#: xs/src/libslic3r/PrintConfig.cpp:1460 xs/src/libslic3r/PrintConfig.cpp:1471
+#: xs/src/libslic3r/PrintConfig.cpp:1487 xs/src/libslic3r/PrintConfig.cpp:1496
+#: xs/src/libslic3r/PrintConfig.cpp:1505 xs/src/libslic3r/PrintConfig.cpp:1516
+#: xs/src/libslic3r/PrintConfig.cpp:1532 xs/src/libslic3r/PrintConfig.cpp:1540
+#: xs/src/libslic3r/PrintConfig.cpp:1541 xs/src/libslic3r/PrintConfig.cpp:1550
+#: xs/src/libslic3r/PrintConfig.cpp:1558 xs/src/libslic3r/PrintConfig.cpp:1572
+#: xs/src/libslic3r/GCode/PreviewData.cpp:147
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:89
 msgid "Support material"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:380
+#: xs/src/slic3r/GUI/Tab.cpp:450
 msgid "Raft"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:384
+#: xs/src/slic3r/GUI/Tab.cpp:454
 msgid "Options for support material and raft"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:398
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:118
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:278
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:635
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:747
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:979
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1201
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1251
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1302
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1625
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:71
+#: xs/src/slic3r/GUI/Tab.cpp:468 xs/src/libslic3r/PrintConfig.cpp:118
+#: xs/src/libslic3r/PrintConfig.cpp:278 xs/src/libslic3r/PrintConfig.cpp:635
+#: xs/src/libslic3r/PrintConfig.cpp:747 xs/src/libslic3r/PrintConfig.cpp:986
+#: xs/src/libslic3r/PrintConfig.cpp:1208 xs/src/libslic3r/PrintConfig.cpp:1258
+#: xs/src/libslic3r/PrintConfig.cpp:1309 xs/src/libslic3r/PrintConfig.cpp:1632
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:71
 msgid "Speed"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:399
+#: xs/src/slic3r/GUI/Tab.cpp:469
 msgid "Speed for print moves"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:411
+#: xs/src/slic3r/GUI/Tab.cpp:481
 msgid "Speed for non-print moves"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:414
+#: xs/src/slic3r/GUI/Tab.cpp:484
 msgid "Modifiers"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:417
+#: xs/src/slic3r/GUI/Tab.cpp:487
 msgid "Acceleration control (advanced)"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:424
+#: xs/src/slic3r/GUI/Tab.cpp:494
 msgid "Autospeed (advanced)"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:430
+#: xs/src/slic3r/GUI/Tab.cpp:500
 msgid "Multiple Extruders"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:431
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:966
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:308
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:702
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:958
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1272
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1445
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1471
+#: xs/src/slic3r/GUI/Tab.cpp:501 xs/src/slic3r/GUI/Tab.cpp:1040
+#: xs/src/libslic3r/PrintConfig.cpp:308 xs/src/libslic3r/PrintConfig.cpp:702
+#: xs/src/libslic3r/PrintConfig.cpp:965 xs/src/libslic3r/PrintConfig.cpp:1279
+#: xs/src/libslic3r/PrintConfig.cpp:1452 xs/src/libslic3r/PrintConfig.cpp:1478
 msgid "Extruders"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:438
+#: xs/src/slic3r/GUI/Tab.cpp:508
 msgid "Ooze prevention"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:442
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:149
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:91
+#: xs/src/slic3r/GUI/Tab.cpp:512 xs/src/libslic3r/GCode/PreviewData.cpp:149
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:91
 msgid "Wipe tower"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:453
+#: xs/src/slic3r/GUI/Tab.cpp:523
 msgid "Extrusion width"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:463
+#: xs/src/slic3r/GUI/Tab.cpp:533
 msgid "Overlap"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:466
+#: xs/src/slic3r/GUI/Tab.cpp:536
 msgid "Flow"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:469
+#: xs/src/slic3r/GUI/Tab.cpp:539
 msgid "Other"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:476
+#: xs/src/slic3r/GUI/Tab.cpp:546
 msgid "Output options"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:477
+#: xs/src/slic3r/GUI/Tab.cpp:547
 msgid "Sequential printing"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:479
+#: xs/src/slic3r/GUI/Tab.cpp:549
 msgid "Extruder clearance (mm)"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:488
+#: xs/src/slic3r/GUI/Tab.cpp:558
 msgid "Output file"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:494
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1001
+#: xs/src/slic3r/GUI/Tab.cpp:564 xs/src/libslic3r/PrintConfig.cpp:1008
 msgid "Post-processing scripts"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:500
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:501
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:859
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:860
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1156
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1157
+#: xs/src/slic3r/GUI/Tab.cpp:570 xs/src/slic3r/GUI/Tab.cpp:571
+#: xs/src/slic3r/GUI/Tab.cpp:933 xs/src/slic3r/GUI/Tab.cpp:934
+#: xs/src/slic3r/GUI/Tab.cpp:1234 xs/src/slic3r/GUI/Tab.cpp:1235
 msgid "Notes"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:507
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:867
+#: xs/src/slic3r/GUI/Tab.cpp:577 xs/src/slic3r/GUI/Tab.cpp:941
 msgid "Dependencies"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:508
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:868
+#: xs/src/slic3r/GUI/Tab.cpp:578 xs/src/slic3r/GUI/Tab.cpp:942
 msgid "Profile dependencies"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:509
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:869
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1668
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:143
+#: xs/src/slic3r/GUI/Tab.cpp:579 xs/src/slic3r/GUI/Tab.cpp:943
+#: xs/src/slic3r/GUI/Tab.cpp:1746 xs/src/libslic3r/PrintConfig.cpp:143
 msgid "Compatible printers"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:533
-#, no-c-format
+#: xs/src/slic3r/GUI/Tab.cpp:603
+#, possible-c-format
 msgid ""
 "The Spiral Vase mode requires:\n"
 "- one perimeter\n"
@@ -425,11 +395,11 @@ msgid ""
 "Shall I adjust those settings in order to enable Spiral Vase?"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:540
+#: xs/src/slic3r/GUI/Tab.cpp:610
 msgid "Spiral Vase"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:560
+#: xs/src/slic3r/GUI/Tab.cpp:630
 msgid ""
 "The Wipe Tower currently supports only:\n"
 "- first layer height 0.2mm\n"
@@ -438,13 +408,12 @@ msgid ""
 "Shall I adjust those settings in order to enable the Wipe Tower?"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:564
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:585
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:602
+#: xs/src/slic3r/GUI/Tab.cpp:634 xs/src/slic3r/GUI/Tab.cpp:656
+#: xs/src/slic3r/GUI/Tab.cpp:673
 msgid "Wipe Tower"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:581
+#: xs/src/slic3r/GUI/Tab.cpp:652
 msgid ""
 "The Wipe Tower currently supports the non-soluble supports only\n"
 "if they are printed with the current extruder without triggering a tool "
@@ -455,7 +424,7 @@ msgid ""
 "Shall I adjust those settings in order to enable the Wipe Tower?"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:599
+#: xs/src/slic3r/GUI/Tab.cpp:670
 msgid ""
 "For the Wipe Tower to work with the soluble supports, the support layers\n"
 "need to be synchronized with the object layers.\n"
@@ -463,7 +432,7 @@ msgid ""
 "Shall I synchronize support layers in order to enable the Wipe Tower?"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:617
+#: xs/src/slic3r/GUI/Tab.cpp:688
 msgid ""
 "Supports work better, if the following feature is enabled:\n"
 "- Detect bridging perimeters\n"
@@ -471,351 +440,356 @@ msgid ""
 "Shall I adjust those settings for supports?"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:620
+#: xs/src/slic3r/GUI/Tab.cpp:691
 msgid "Support Generator"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:662
+#: xs/src/slic3r/GUI/Tab.cpp:733
 msgid "The "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:662
-#, no-c-format
+#: xs/src/slic3r/GUI/Tab.cpp:733
+#, possible-c-format
 msgid ""
 " infill pattern is not supposed to work at 100% density.\n"
 "\n"
 "Shall I switch to rectilinear fill pattern?"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:786
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:787
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:368
+#: xs/src/slic3r/GUI/Tab.cpp:860 xs/src/slic3r/GUI/Tab.cpp:861
+#: lib/Slic3r/GUI/Plater.pm:368
 msgid "Filament"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:794
+#: xs/src/slic3r/GUI/Tab.cpp:868
 msgid "Temperature "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:795
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1234
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:307
+#: xs/src/slic3r/GUI/Tab.cpp:869 xs/src/slic3r/GUI/Tab.cpp:1313
+#: xs/src/libslic3r/PrintConfig.cpp:307
 msgid "Extruder"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:800
+#: xs/src/slic3r/GUI/Tab.cpp:874
 msgid "Bed"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:805
+#: xs/src/slic3r/GUI/Tab.cpp:879
 msgid "Cooling"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:806
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:922
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1695
+#: xs/src/slic3r/GUI/Tab.cpp:880 xs/src/libslic3r/PrintConfig.cpp:929
+#: xs/src/libslic3r/PrintConfig.cpp:1702
 msgid "Enable"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:817
+#: xs/src/slic3r/GUI/Tab.cpp:891
 msgid "Fan settings"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:818
+#: xs/src/slic3r/GUI/Tab.cpp:892
 msgid "Fan speed"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:826
+#: xs/src/slic3r/GUI/Tab.cpp:900
 msgid "Cooling thresholds"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:832
+#: xs/src/slic3r/GUI/Tab.cpp:906
 msgid "Filament properties"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:836
+#: xs/src/slic3r/GUI/Tab.cpp:910
 msgid "Print speed override"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:846
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1119
+#: xs/src/slic3r/GUI/Tab.cpp:920 xs/src/slic3r/GUI/Tab.cpp:1197
 msgid "Custom G-code"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:847
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1120
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1342
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1357
+#: xs/src/slic3r/GUI/Tab.cpp:921 xs/src/slic3r/GUI/Tab.cpp:1198
+#: xs/src/libslic3r/PrintConfig.cpp:1349 xs/src/libslic3r/PrintConfig.cpp:1364
 msgid "Start G-code"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:853
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1126
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:217
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:227
+#: xs/src/slic3r/GUI/Tab.cpp:927 xs/src/slic3r/GUI/Tab.cpp:1204
+#: xs/src/libslic3r/PrintConfig.cpp:217 xs/src/libslic3r/PrintConfig.cpp:227
 msgid "End G-code"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:937
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:11
+#: xs/src/slic3r/GUI/Tab.cpp:1011 xs/src/slic3r/GUI/Preferences.cpp:11
 msgid "General"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:938
+#: xs/src/slic3r/GUI/Tab.cpp:1012
 msgid "Size and coordinates"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:940
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:34
+#: xs/src/slic3r/GUI/Tab.cpp:1014 xs/src/libslic3r/PrintConfig.cpp:34
 msgid "Bed shape"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:942
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1637
+#: xs/src/slic3r/GUI/Tab.cpp:1016 xs/src/slic3r/GUI/Tab.cpp:1715
 msgid " Set "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:962
+#: xs/src/slic3r/GUI/Tab.cpp:1036
 msgid "Capabilities"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:967
+#: xs/src/slic3r/GUI/Tab.cpp:1041
 msgid "Number of extruders of the printer."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:989
+#: xs/src/slic3r/GUI/Tab.cpp:1063
 msgid "USB/Serial connection"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:990
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1193
+#: xs/src/slic3r/GUI/Tab.cpp:1064 xs/src/libslic3r/PrintConfig.cpp:1200
 msgid "Serial port"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:995
+#: xs/src/slic3r/GUI/Tab.cpp:1069
 msgid "Rescan serial ports"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1004
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1072
+#: xs/src/slic3r/GUI/Tab.cpp:1078 xs/src/slic3r/GUI/Tab.cpp:1125
 msgid "Test"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1017
+#: xs/src/slic3r/GUI/Tab.cpp:1091
 msgid "Connection to printer works correctly."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1017
+#: xs/src/slic3r/GUI/Tab.cpp:1091 xs/src/slic3r/GUI/Tab.cpp:1135
 msgid "Success!"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1020
+#: xs/src/slic3r/GUI/Tab.cpp:1094
 msgid "Connection failed."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1032
+#: xs/src/slic3r/GUI/Tab.cpp:1106
 msgid "OctoPrint upload"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1035
+#: xs/src/slic3r/GUI/Tab.cpp:1109 xs/src/slic3r/GUI/Tab.cpp:1156
 msgid " Browse "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1110
+#: xs/src/slic3r/GUI/Tab.cpp:1135 lib/Slic3r/GUI/MainFrame.pm:209
+msgid "Connection to OctoPrint works correctly."
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:1138
+msgid "Could not connect to OctoPrint"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:1138
+msgid "Note: OctoPrint version at least 1.1.0 is required."
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:1162
+msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:1163
+msgid "Open CA certificate file"
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:1177
+msgid ""
+"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
+"signed certificate."
+msgstr ""
+
+#: xs/src/slic3r/GUI/Tab.cpp:1188
 msgid "Firmware"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1132
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:48
+#: xs/src/slic3r/GUI/Tab.cpp:1210 xs/src/libslic3r/PrintConfig.cpp:48
 msgid "Before layer change G-code"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1138
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:766
+#: xs/src/slic3r/GUI/Tab.cpp:1216 xs/src/libslic3r/PrintConfig.cpp:766
 msgid "After layer change G-code"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1144
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1602
+#: xs/src/slic3r/GUI/Tab.cpp:1222 xs/src/libslic3r/PrintConfig.cpp:1609
 msgid "Tool change G-code"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1150
+#: xs/src/slic3r/GUI/Tab.cpp:1228
 msgid "Between objects G-code (for sequential printing)"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1187
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:400
+#: xs/src/slic3r/GUI/Tab.cpp:1266 xs/src/libslic3r/GCode/PreviewData.cpp:400
 #, possible-c-format
 msgid "Extruder %d"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1194
+#: xs/src/slic3r/GUI/Tab.cpp:1273
 msgid "Layer height limits"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1199
+#: xs/src/slic3r/GUI/Tab.cpp:1278
 msgid "Position (for multi-extruder printers)"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1202
+#: xs/src/slic3r/GUI/Tab.cpp:1281
 msgid "Retraction"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1205
+#: xs/src/slic3r/GUI/Tab.cpp:1284
 msgid "Only lift Z"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1218
+#: xs/src/slic3r/GUI/Tab.cpp:1297
 msgid ""
 "Retraction when tool is disabled (advanced settings for multi-extruder "
 "setups)"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1222
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:150
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2125
+#: xs/src/slic3r/GUI/Tab.cpp:1301 lib/Slic3r/GUI/Plater.pm:150
+#: lib/Slic3r/GUI/Plater.pm:2095
 msgid "Preview"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1312
+#: xs/src/slic3r/GUI/Tab.cpp:1386
 msgid ""
 "The Wipe option is not available when using the Firmware Retraction mode.\n"
 "\n"
 "Shall I disable it in order to enable Firmware Retraction?"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1314
+#: xs/src/slic3r/GUI/Tab.cpp:1388
 msgid "Firmware Retraction"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1469
+#: xs/src/slic3r/GUI/Tab.cpp:1547
 msgid "Default "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1469
+#: xs/src/slic3r/GUI/Tab.cpp:1547
 msgid " preset"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1470
+#: xs/src/slic3r/GUI/Tab.cpp:1548
 msgid " preset\n"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1488
+#: xs/src/slic3r/GUI/Tab.cpp:1566
 msgid ""
 "\n"
 "\n"
 "is not compatible with printer\n"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1488
+#: xs/src/slic3r/GUI/Tab.cpp:1566
 msgid ""
 "\n"
 "\n"
 "and it has the following unsaved changes:"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1489
+#: xs/src/slic3r/GUI/Tab.cpp:1567
 msgid ""
 "\n"
 "\n"
 "has the following unsaved changes:"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1491
+#: xs/src/slic3r/GUI/Tab.cpp:1569
 msgid ""
 "\n"
 "\n"
 "Discard changes and continue anyway?"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1492
+#: xs/src/slic3r/GUI/Tab.cpp:1570
 msgid "Unsaved Changes"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1560
+#: xs/src/slic3r/GUI/Tab.cpp:1638
 msgid "The supplied name is empty. It can't be saved."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1580
+#: xs/src/slic3r/GUI/Tab.cpp:1658
 msgid "remove"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1580
+#: xs/src/slic3r/GUI/Tab.cpp:1658
 msgid "delete"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1581
+#: xs/src/slic3r/GUI/Tab.cpp:1659
 msgid "Are you sure you want to "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1581
+#: xs/src/slic3r/GUI/Tab.cpp:1659
 msgid " the selected preset?"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1582
+#: xs/src/slic3r/GUI/Tab.cpp:1660
 msgid "Remove"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1582
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:178
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:196
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2021
+#: xs/src/slic3r/GUI/Tab.cpp:1660 lib/Slic3r/GUI/Plater.pm:178
+#: lib/Slic3r/GUI/Plater.pm:196 lib/Slic3r/GUI/Plater.pm:1991
 msgid "Delete"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1583
+#: xs/src/slic3r/GUI/Tab.cpp:1661
 msgid " Preset"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1636
+#: xs/src/slic3r/GUI/Tab.cpp:1714
 msgid "All"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1667
+#: xs/src/slic3r/GUI/Tab.cpp:1745
 msgid "Select the printers this profile is compatible with."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1751
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:514
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1645
+#: xs/src/slic3r/GUI/Tab.cpp:1834 lib/Slic3r/GUI/MainFrame.pm:509
+#: lib/Slic3r/GUI/Plater.pm:1615
 msgid "Save "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1751
+#: xs/src/slic3r/GUI/Tab.cpp:1834
 msgid " as:"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1785
+#: xs/src/slic3r/GUI/Tab.cpp:1868
 msgid ""
 "The supplied name is not valid; the following characters are not allowed:"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.cpp:1788
+#: xs/src/slic3r/GUI/Tab.cpp:1871
 msgid "The supplied name is not available."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:182
+#: xs/src/slic3r/GUI/Tab.hpp:185
 msgid "Print Settings"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:202
+#: xs/src/slic3r/GUI/Tab.hpp:205
 msgid "Filament Settings"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:228
+#: xs/src/slic3r/GUI/Tab.hpp:226
 msgid "Printer Settings"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Tab.hpp:248
+#: xs/src/slic3r/GUI/Tab.hpp:240
 msgid "Save preset"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Field.cpp:42
+#: xs/src/slic3r/GUI/Field.cpp:59
 msgid "default"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:26
+#: xs/src/slic3r/GUI/PresetHints.cpp:27
 #, possible-c-format
 msgid ""
 "If estimated layer time is below ~%ds, fan will run at %d%% and print speed "
@@ -823,7 +797,7 @@ msgid ""
 "speed will never be reduced below %dmm/s)."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:30
+#: xs/src/slic3r/GUI/PresetHints.cpp:31
 #, possible-c-format
 msgid ""
 "\n"
@@ -831,330 +805,355 @@ msgid ""
 "proportionally decreasing speed between %d%% and %d%%."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:34
+#: xs/src/slic3r/GUI/PresetHints.cpp:35
 msgid ""
 "\n"
 "During the other layers, fan "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:36
+#: xs/src/slic3r/GUI/PresetHints.cpp:37
 msgid "Fan "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:41
+#: xs/src/slic3r/GUI/PresetHints.cpp:42
 #, possible-c-format
 msgid "will always run at %d%% "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:44
+#: xs/src/slic3r/GUI/PresetHints.cpp:45
 #, possible-c-format
 msgid "except for the first %d layers"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:48
+#: xs/src/slic3r/GUI/PresetHints.cpp:49
 msgid "except for the first layer"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:50
+#: xs/src/slic3r/GUI/PresetHints.cpp:51
 msgid "will be turned off."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:151
+#: xs/src/slic3r/GUI/PresetHints.cpp:152
 msgid "external perimeters"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:160
+#: xs/src/slic3r/GUI/PresetHints.cpp:161
 msgid "perimeters"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:169
+#: xs/src/slic3r/GUI/PresetHints.cpp:170
 msgid "infill"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:179
+#: xs/src/slic3r/GUI/PresetHints.cpp:180
 msgid "solid infill"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:187
+#: xs/src/slic3r/GUI/PresetHints.cpp:188
 msgid "top solid infill"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:198
+#: xs/src/slic3r/GUI/PresetHints.cpp:199
 msgid "support"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:208
+#: xs/src/slic3r/GUI/PresetHints.cpp:209
 msgid "support interface"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:214
+#: xs/src/slic3r/GUI/PresetHints.cpp:215
 msgid "First layer volumetric"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:214
+#: xs/src/slic3r/GUI/PresetHints.cpp:215
 msgid "Bridging volumetric"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:214
+#: xs/src/slic3r/GUI/PresetHints.cpp:215
 msgid "Volumetric"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:215
+#: xs/src/slic3r/GUI/PresetHints.cpp:216
 msgid " flow rate is maximized "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:218
+#: xs/src/slic3r/GUI/PresetHints.cpp:219
 msgid "by the print profile maximum"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:219
+#: xs/src/slic3r/GUI/PresetHints.cpp:220
 msgid "when printing "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:220
+#: xs/src/slic3r/GUI/PresetHints.cpp:221
 msgid " with a volumetric rate "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:224
+#: xs/src/slic3r/GUI/PresetHints.cpp:225
 #, possible-c-format
 msgid "%3.2f mm³/s"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:226
+#: xs/src/slic3r/GUI/PresetHints.cpp:227
 #, possible-c-format
 msgid " at filament speed %3.2f mm/s."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:245
+#: xs/src/slic3r/GUI/PresetHints.cpp:246
 msgid ""
 "Recommended object thin wall thickness: Not available due to invalid layer "
 "height."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:262
+#: xs/src/slic3r/GUI/PresetHints.cpp:263
 #, possible-c-format
 msgid "Recommended object thin wall thickness for layer height %.2f and "
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\PresetHints.cpp:269
+#: xs/src/slic3r/GUI/PresetHints.cpp:270
 #, possible-c-format
 msgid "%d lines: %.2lf mm"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.hpp:17
+#: xs/src/slic3r/GUI/Preferences.hpp:17
 msgid "Preferences"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:27
+#: xs/src/slic3r/GUI/Preferences.cpp:27
 msgid "Remember output directory"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:29
+#: xs/src/slic3r/GUI/Preferences.cpp:29
 msgid ""
 "If this is enabled, Slic3r will prompt the last output directory instead of "
 "the one containing the input files."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:35
+#: xs/src/slic3r/GUI/Preferences.cpp:35
 msgid "Auto-center parts"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:37
+#: xs/src/slic3r/GUI/Preferences.cpp:37
 msgid ""
 "If this is enabled, Slic3r will auto-center objects around the print bed "
 "center."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:43
+#: xs/src/slic3r/GUI/Preferences.cpp:43
 msgid "Background processing"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:45
+#: xs/src/slic3r/GUI/Preferences.cpp:45
 msgid ""
 "If this is enabled, Slic3r will pre-process objects as soon as they're "
 "loaded in order to save time when exporting G-code."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:51
+#: xs/src/slic3r/GUI/Preferences.cpp:51
 msgid "Disable USB/serial connection"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:53
+#: xs/src/slic3r/GUI/Preferences.cpp:53
 msgid ""
 "Disable communication with the printer over a serial / USB cable. This "
 "simplifies the user interface in case the printer is never attached to the "
 "computer."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:59
+#: xs/src/slic3r/GUI/Preferences.cpp:59
 msgid "Suppress \" - default - \" presets"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:61
+#: xs/src/slic3r/GUI/Preferences.cpp:61
 msgid ""
 "Suppress \" - default - \" presets in the Print / Filament / Printer "
 "selections once there are any other valid presets available."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:67
+#: xs/src/slic3r/GUI/Preferences.cpp:67
 msgid "Show incompatible print and filament presets"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:69
+#: xs/src/slic3r/GUI/Preferences.cpp:69
 msgid ""
 "When checked, the print and filament presets are shown in the preset editor "
 "even if they are marked as incompatible with the active printer"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:75
+#: xs/src/slic3r/GUI/Preferences.cpp:75
 msgid "Use legacy OpenGL 1.1 rendering"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:77
+#: xs/src/slic3r/GUI/Preferences.cpp:77
 msgid ""
 "If you have rendering issues caused by a buggy OpenGL 2.0 driver, you may "
 "try to check this checkbox. This will disable the layer height editing and "
 "anti aliasing, so it is likely better to upgrade your graphics driver."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\slic3r\GUI\Preferences.cpp:101
+#: xs/src/slic3r/GUI/Preferences.cpp:101
 msgid "You need to restart Slic3r to make the changes effective."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:26
+#: xs/src/slic3r/GUI/BonjourDialog.cpp:53
+msgid "Network lookup"
+msgstr ""
+
+#: xs/src/slic3r/GUI/BonjourDialog.cpp:66
+msgid "Address"
+msgstr ""
+
+#: xs/src/slic3r/GUI/BonjourDialog.cpp:67
+msgid "Hostname"
+msgstr ""
+
+#: xs/src/slic3r/GUI/BonjourDialog.cpp:68
+msgid "Service name"
+msgstr ""
+
+#: xs/src/slic3r/GUI/BonjourDialog.cpp:69
+msgid "OctoPrint version"
+msgstr ""
+
+#: xs/src/slic3r/GUI/BonjourDialog.cpp:187
+msgid "Searching for devices"
+msgstr ""
+
+#: xs/src/slic3r/GUI/BonjourDialog.cpp:194
+msgid "Finished."
+msgstr ""
+
+#: xs/src/slic3r/Utils/OctoPrint.cpp:53
+msgid "G-code file successfully uploaded to the OctoPrint server"
+msgstr ""
+
+#: xs/src/slic3r/Utils/OctoPrint.cpp:67
+msgid "Error while uploading to the OctoPrint server"
+msgstr ""
+
+#: xs/src/slic3r/Utils/OctoPrint.cpp:102
+msgid "Invalid API key"
+msgstr ""
+
+#: xs/src/libslic3r/PrintConfig.cpp:26
 msgid "Avoid crossing perimeters"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:27
+#: xs/src/libslic3r/PrintConfig.cpp:27
 msgid ""
 "Optimize travel moves in order to minimize the crossing of perimeters. This "
 "is mostly useful with Bowden extruders which suffer from oozing. This "
 "feature slows down both the print and the G-code generation."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:38
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1572
+#: xs/src/libslic3r/PrintConfig.cpp:38 xs/src/libslic3r/PrintConfig.cpp:1579
 msgid "Other layers"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:39
+#: xs/src/libslic3r/PrintConfig.cpp:39
 msgid ""
 "Bed temperature for layers after the first one. Set this to zero to disable "
 "bed temperature control commands in the output."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:42
+#: xs/src/libslic3r/PrintConfig.cpp:42
 msgid "Bed temperature"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:49
+#: xs/src/libslic3r/PrintConfig.cpp:49
 msgid ""
 "This custom code is inserted at every layer change, right before the Z move. "
 "Note that you can use placeholder variables for all Slic3r settings as well "
 "as [layer_num] and [layer_z]."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:59
+#: xs/src/libslic3r/PrintConfig.cpp:59
 msgid "Between objects G-code"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:60
+#: xs/src/libslic3r/PrintConfig.cpp:60
 msgid ""
 "This code is inserted between objects when using sequential printing. By "
 "default extruder and bed temperature are reset using non-wait command; "
 "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
 "will not add temperature commands. Note that you can use placeholder "
-"variables for all Slic3r settings, so you can put a \"M109 S"
-"[first_layer_temperature]\" command wherever you want."
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:68
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:370
+#: xs/src/libslic3r/PrintConfig.cpp:68 lib/Slic3r/GUI/MainFrame.pm:364
 msgid "Bottom"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:69
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:239
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:290
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:298
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:604
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:762
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:778
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:941
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:989
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1152
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1583
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1639
+#: xs/src/libslic3r/PrintConfig.cpp:69 xs/src/libslic3r/PrintConfig.cpp:239
+#: xs/src/libslic3r/PrintConfig.cpp:290 xs/src/libslic3r/PrintConfig.cpp:298
+#: xs/src/libslic3r/PrintConfig.cpp:604 xs/src/libslic3r/PrintConfig.cpp:762
+#: xs/src/libslic3r/PrintConfig.cpp:778 xs/src/libslic3r/PrintConfig.cpp:948
+#: xs/src/libslic3r/PrintConfig.cpp:996 xs/src/libslic3r/PrintConfig.cpp:1159
+#: xs/src/libslic3r/PrintConfig.cpp:1590 xs/src/libslic3r/PrintConfig.cpp:1646
 msgid "Layers and Perimeters"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:70
+#: xs/src/libslic3r/PrintConfig.cpp:70
 msgid "Number of solid layers to generate on bottom surfaces."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:72
+#: xs/src/libslic3r/PrintConfig.cpp:72
 msgid "Bottom solid layers"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:77
+#: xs/src/libslic3r/PrintConfig.cpp:77
 msgid "Bridge"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:78
+#: xs/src/libslic3r/PrintConfig.cpp:78
 msgid ""
 "This is the acceleration your printer will use for bridges. Set zero to "
 "disable acceleration control for bridges."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:80
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:174
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:576
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:684
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:952
+#: xs/src/libslic3r/PrintConfig.cpp:80 xs/src/libslic3r/PrintConfig.cpp:174
+#: xs/src/libslic3r/PrintConfig.cpp:576 xs/src/libslic3r/PrintConfig.cpp:684
+#: xs/src/libslic3r/PrintConfig.cpp:959
 msgid "mm/s²"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:86
+#: xs/src/libslic3r/PrintConfig.cpp:86
 msgid "Bridging angle"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:88
+#: xs/src/libslic3r/PrintConfig.cpp:88
 msgid ""
 "Bridging angle override. If left to zero, the bridging angle will be "
 "calculated automatically. Otherwise the provided angle will be used for all "
 "bridges. Use 180° for zero angle."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:91
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:492
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1170
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1181
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1401
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1557
+#: xs/src/libslic3r/PrintConfig.cpp:91 xs/src/libslic3r/PrintConfig.cpp:492
+#: xs/src/libslic3r/PrintConfig.cpp:1177 xs/src/libslic3r/PrintConfig.cpp:1188
+#: xs/src/libslic3r/PrintConfig.cpp:1408 xs/src/libslic3r/PrintConfig.cpp:1564
 msgid "°"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:97
+#: xs/src/libslic3r/PrintConfig.cpp:97
 msgid "Bridges fan speed"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:98
+#: xs/src/libslic3r/PrintConfig.cpp:98
 msgid "This fan speed is enforced during all bridges and overhangs."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:99
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:504
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:789
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:850
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1060
+#: xs/src/libslic3r/PrintConfig.cpp:99 xs/src/libslic3r/PrintConfig.cpp:504
+#: xs/src/libslic3r/PrintConfig.cpp:789 xs/src/libslic3r/PrintConfig.cpp:850
+#: xs/src/libslic3r/PrintConfig.cpp:1067
 msgid "%"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:106
+#: xs/src/libslic3r/PrintConfig.cpp:106
 msgid "Bridge flow ratio"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:108
+#: xs/src/libslic3r/PrintConfig.cpp:108
 msgid ""
 "This factor affects the amount of plastic for bridging. You can decrease it "
 "slightly to pull the extrudates and prevent sagging, although default "
@@ -1162,64 +1161,59 @@ msgid ""
 "before tweaking this."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:117
+#: xs/src/libslic3r/PrintConfig.cpp:117
 msgid "Bridges"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:119
+#: xs/src/libslic3r/PrintConfig.cpp:119
 msgid "Speed for printing bridges."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:120
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:638
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:749
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:811
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:868
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:981
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1137
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1146
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1536
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1649
+#: xs/src/libslic3r/PrintConfig.cpp:120 xs/src/libslic3r/PrintConfig.cpp:638
+#: xs/src/libslic3r/PrintConfig.cpp:749 xs/src/libslic3r/PrintConfig.cpp:811
+#: xs/src/libslic3r/PrintConfig.cpp:868 xs/src/libslic3r/PrintConfig.cpp:988
+#: xs/src/libslic3r/PrintConfig.cpp:1144 xs/src/libslic3r/PrintConfig.cpp:1153
+#: xs/src/libslic3r/PrintConfig.cpp:1543 xs/src/libslic3r/PrintConfig.cpp:1656
 msgid "mm/s"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:127
+#: xs/src/libslic3r/PrintConfig.cpp:127
 msgid "Brim width"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:128
+#: xs/src/libslic3r/PrintConfig.cpp:128
 msgid ""
 "Horizontal width of the brim that will be printed around each object on the "
 "first layer."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:135
+#: xs/src/libslic3r/PrintConfig.cpp:135
 msgid "Clip multi-part objects"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:136
+#: xs/src/libslic3r/PrintConfig.cpp:136
 msgid ""
 "When printing multi-material objects, this settings will make slic3r to clip "
 "the overlapping object parts one by the other (2nd part will be clipped by "
 "the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:147
+#: xs/src/libslic3r/PrintConfig.cpp:147
 msgid "Compatible printers condition"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:148
+#: xs/src/libslic3r/PrintConfig.cpp:148
 msgid ""
 "A boolean expression using the configuration values of an active printer "
 "profile. If this expression evaluates to true, this profile is considered "
 "compatible with the active printer profile."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:154
+#: xs/src/libslic3r/PrintConfig.cpp:154
 msgid "Complete individual objects"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:155
+#: xs/src/libslic3r/PrintConfig.cpp:155
 msgid ""
 "When printing multiple objects or copies, this feature will complete each "
 "object before moving onto next one (and starting it from its bottom layer). "
@@ -1227,78 +1221,75 @@ msgid ""
 "warn and prevent you from extruder collisions, but beware."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:163
+#: xs/src/libslic3r/PrintConfig.cpp:163
 msgid "Enable auto cooling"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:164
+#: xs/src/libslic3r/PrintConfig.cpp:164
 msgid ""
 "This flag enables the automatic cooling logic that adjusts print speed and "
 "fan speed according to layer printing time."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:171
+#: xs/src/libslic3r/PrintConfig.cpp:171
 msgid ""
 "This is the acceleration your printer will be reset to after the role-"
 "specific acceleration values are used (perimeter/infill). Set zero to "
 "prevent resetting acceleration at all."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:180
+#: xs/src/libslic3r/PrintConfig.cpp:180
 msgid "Disable fan for the first"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:181
+#: xs/src/libslic3r/PrintConfig.cpp:181
 msgid ""
 "You can set this to a positive value to disable fan at all during the first "
 "layers, so that it does not make adhesion worse."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:183
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:694
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1033
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1224
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1285
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1437
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1482
+#: xs/src/libslic3r/PrintConfig.cpp:183 xs/src/libslic3r/PrintConfig.cpp:694
+#: xs/src/libslic3r/PrintConfig.cpp:1040 xs/src/libslic3r/PrintConfig.cpp:1231
+#: xs/src/libslic3r/PrintConfig.cpp:1292 xs/src/libslic3r/PrintConfig.cpp:1444
+#: xs/src/libslic3r/PrintConfig.cpp:1489
 msgid "layers"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:190
+#: xs/src/libslic3r/PrintConfig.cpp:190
 msgid "Don't support bridges"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:192
+#: xs/src/libslic3r/PrintConfig.cpp:192
 msgid ""
 "Experimental option for preventing support material from being generated "
 "under bridged areas."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:198
+#: xs/src/libslic3r/PrintConfig.cpp:198
 msgid "Distance between copies"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:199
+#: xs/src/libslic3r/PrintConfig.cpp:199
 msgid "Distance used for the auto-arrange feature of the plater."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:207
+#: xs/src/libslic3r/PrintConfig.cpp:207
 msgid "Elephant foot compensation"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:209
+#: xs/src/libslic3r/PrintConfig.cpp:209
 msgid ""
 "The first layer will be shrunk in the XY plane by the configured value to "
 "compensate for the 1st layer squish aka an Elephant Foot effect."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:218
+#: xs/src/libslic3r/PrintConfig.cpp:218
 msgid ""
 "This end procedure is inserted at the end of the output file. Note that you "
 "can use placeholder variables for all Slic3r settings."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:228
+#: xs/src/libslic3r/PrintConfig.cpp:228
 msgid ""
 "This end procedure is inserted at the end of the output file, before the "
 "printer end gcode. Note that you can use placeholder variables for all "
@@ -1306,43 +1297,38 @@ msgid ""
 "extruder order."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:238
+#: xs/src/libslic3r/PrintConfig.cpp:238
 msgid "Ensure vertical shell thickness"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:240
+#: xs/src/libslic3r/PrintConfig.cpp:240
 msgid ""
 "Add solid infill near sloping surfaces to guarantee the vertical shell "
 "thickness (top+bottom solid layers)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:246
+#: xs/src/libslic3r/PrintConfig.cpp:246
 msgid "Top/bottom fill pattern"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:248
+#: xs/src/libslic3r/PrintConfig.cpp:248
 msgid ""
 "Fill pattern for top/bottom infill. This only affects the external visible "
 "layer, and not its adjacent solid shells."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:267
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:277
+#: xs/src/libslic3r/PrintConfig.cpp:267 xs/src/libslic3r/PrintConfig.cpp:277
 msgid "External perimeters"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:268
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:377
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:592
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:710
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:967
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1292
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1454
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1614
+#: xs/src/libslic3r/PrintConfig.cpp:268 xs/src/libslic3r/PrintConfig.cpp:377
+#: xs/src/libslic3r/PrintConfig.cpp:592 xs/src/libslic3r/PrintConfig.cpp:710
+#: xs/src/libslic3r/PrintConfig.cpp:974 xs/src/libslic3r/PrintConfig.cpp:1299
+#: xs/src/libslic3r/PrintConfig.cpp:1461 xs/src/libslic3r/PrintConfig.cpp:1621
 msgid "Extrusion Width"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:269
+#: xs/src/libslic3r/PrintConfig.cpp:269
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for external "
 "perimeters. If left zero, default extrusion width will be used if set, "
@@ -1350,67 +1336,60 @@ msgid ""
 "(for example 200%), it will be computed over layer height."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:272
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:597
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:715
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:972
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1296
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1458
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1619
+#: xs/src/libslic3r/PrintConfig.cpp:272 xs/src/libslic3r/PrintConfig.cpp:597
+#: xs/src/libslic3r/PrintConfig.cpp:715 xs/src/libslic3r/PrintConfig.cpp:979
+#: xs/src/libslic3r/PrintConfig.cpp:1303 xs/src/libslic3r/PrintConfig.cpp:1465
+#: xs/src/libslic3r/PrintConfig.cpp:1626
 msgid "mm or % (leave 0 for default)"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:279
+#: xs/src/libslic3r/PrintConfig.cpp:279
 msgid ""
 "This separate setting will affect the speed of external perimeters (the "
 "visible ones). If expressed as percentage (for example: 80%) it will be "
 "calculated on the perimeters speed setting above. Set to zero for auto."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:282
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:619
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1255
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1306
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1501
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1631
+#: xs/src/libslic3r/PrintConfig.cpp:282 xs/src/libslic3r/PrintConfig.cpp:619
+#: xs/src/libslic3r/PrintConfig.cpp:1262 xs/src/libslic3r/PrintConfig.cpp:1313
+#: xs/src/libslic3r/PrintConfig.cpp:1508 xs/src/libslic3r/PrintConfig.cpp:1638
 msgid "mm/s or %"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:289
+#: xs/src/libslic3r/PrintConfig.cpp:289
 msgid "External perimeters first"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:291
+#: xs/src/libslic3r/PrintConfig.cpp:291
 msgid ""
 "Print contour perimeters from the outermost one to the innermost one instead "
 "of the default inverse order."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:297
+#: xs/src/libslic3r/PrintConfig.cpp:297
 msgid "Extra perimeters if needed"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:299
-#, no-c-format
+#: xs/src/libslic3r/PrintConfig.cpp:299
+#, possible-c-format
 msgid ""
 "Add more perimeters when needed for avoiding gaps in sloping walls. Slic3r "
 "keeps adding perimeters, until more than 70% of the loop immediately above "
 "is supported."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:309
+#: xs/src/libslic3r/PrintConfig.cpp:309
 msgid ""
 "The extruder to use (unless more specific extruder settings are specified). "
 "This value overrides perimeter and infill extruders, but not the support "
 "extruders."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:320
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:69
+#: xs/src/libslic3r/PrintConfig.cpp:320 lib/Slic3r/GUI/Plater/3DPreview.pm:69
 msgid "Height"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:321
+#: xs/src/libslic3r/PrintConfig.cpp:321
 msgid ""
 "Set this to the vertical distance between your nozzle tip and (usually) the "
 "X carriage rods. In other words, this is the height of the clearance "
@@ -1418,31 +1397,30 @@ msgid ""
 "extruder can peek before colliding with other printed objects."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:331
+#: xs/src/libslic3r/PrintConfig.cpp:331
 msgid "Radius"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:332
+#: xs/src/libslic3r/PrintConfig.cpp:332
 msgid ""
 "Set this to the clearance radius around your extruder. If the extruder is "
 "not centered, choose the largest value for safety. This setting is used to "
 "check for collisions and to display the graphical preview in the plater."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:342
+#: xs/src/libslic3r/PrintConfig.cpp:342
 msgid "Extruder Color"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:343
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:406
+#: xs/src/libslic3r/PrintConfig.cpp:343 xs/src/libslic3r/PrintConfig.cpp:406
 msgid "This is only used in the Slic3r interface as a visual help."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:350
+#: xs/src/libslic3r/PrintConfig.cpp:350
 msgid "Extruder offset"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:351
+#: xs/src/libslic3r/PrintConfig.cpp:351
 msgid ""
 "If your firmware doesn't handle the extruder displacement you need the G-"
 "code to take it into account. This option lets you specify the displacement "
@@ -1450,21 +1428,21 @@ msgid ""
 "coordinates (they will be subtracted from the XY coordinate)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:360
+#: xs/src/libslic3r/PrintConfig.cpp:360
 msgid "Extrusion axis"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:361
+#: xs/src/libslic3r/PrintConfig.cpp:361
 msgid ""
 "Use this option to set the axis letter associated to your printer's extruder "
 "(usually E but some printers use A)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:367
+#: xs/src/libslic3r/PrintConfig.cpp:367
 msgid "Extrusion multiplier"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:368
+#: xs/src/libslic3r/PrintConfig.cpp:368
 msgid ""
 "This factor changes the amount of flow proportionally. You may need to tweak "
 "this setting to get nice surface finish and correct single wall widths. "
@@ -1472,11 +1450,11 @@ msgid ""
 "more, check filament diameter and your firmware E steps."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:376
+#: xs/src/libslic3r/PrintConfig.cpp:376
 msgid "Default extrusion width"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:378
+#: xs/src/libslic3r/PrintConfig.cpp:378
 msgid ""
 "Set this to a non-zero value to allow a manual extrusion width. If left to "
 "zero, Slic3r derives extrusion widths from the nozzle diameter (see the "
@@ -1485,77 +1463,74 @@ msgid ""
 "height."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:382
+#: xs/src/libslic3r/PrintConfig.cpp:382
 msgid "mm or % (leave 0 for auto)"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:387
+#: xs/src/libslic3r/PrintConfig.cpp:387
 msgid "Keep fan always on"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:388
+#: xs/src/libslic3r/PrintConfig.cpp:388
 msgid ""
 "If this is enabled, fan will never be disabled and will be kept running at "
 "least at its minimum speed. Useful for PLA, harmful for ABS."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:394
+#: xs/src/libslic3r/PrintConfig.cpp:394
 msgid "Enable fan if layer print time is below"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:395
+#: xs/src/libslic3r/PrintConfig.cpp:395
 msgid ""
 "If layer print time is estimated below this number of seconds, fan will be "
 "enabled and its speed will be calculated by interpolating the minimum and "
 "maximum speeds."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:397
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1242
+#: xs/src/libslic3r/PrintConfig.cpp:397 xs/src/libslic3r/PrintConfig.cpp:1249
 msgid "approximate seconds"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:405
+#: xs/src/libslic3r/PrintConfig.cpp:405
 msgid "Color"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:412
+#: xs/src/libslic3r/PrintConfig.cpp:412
 msgid "Filament notes"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:413
+#: xs/src/libslic3r/PrintConfig.cpp:413
 msgid "You can put your notes regarding the filament here."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:421
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:817
+#: xs/src/libslic3r/PrintConfig.cpp:421 xs/src/libslic3r/PrintConfig.cpp:817
 msgid "Max volumetric speed"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:422
+#: xs/src/libslic3r/PrintConfig.cpp:422
 msgid ""
 "Maximum volumetric speed allowed for this filament. Limits the maximum "
 "volumetric speed of a print to the minimum of print and filament volumetric "
 "speed. Set to zero for no limit."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:425
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:820
+#: xs/src/libslic3r/PrintConfig.cpp:425 xs/src/libslic3r/PrintConfig.cpp:820
 msgid "mm³/s"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:432
+#: xs/src/libslic3r/PrintConfig.cpp:432
 msgid ""
 "Enter your filament diameter here. Good precision is required, so use a "
 "caliper and do multiple measurements along the filament, then compute the "
 "average."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:440
+#: xs/src/libslic3r/PrintConfig.cpp:440
 msgid "Density"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:441
+#: xs/src/libslic3r/PrintConfig.cpp:441
 msgid ""
 "Enter your filament density here. This is only for statistical information. "
 "A decent way is to weigh a known length of filament and compute the ratio of "
@@ -1563,16 +1538,15 @@ msgid ""
 "displacement."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:444
+#: xs/src/libslic3r/PrintConfig.cpp:444
 msgid "g/cm³"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:450
+#: xs/src/libslic3r/PrintConfig.cpp:450
 msgid "Filament type"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:451
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1002
+#: xs/src/libslic3r/PrintConfig.cpp:451 xs/src/libslic3r/PrintConfig.cpp:1009
 msgid ""
 "If you want to process the output G-code through custom scripts, just list "
 "their absolute paths here. Separate multiple scripts with a semicolon. "
@@ -1581,77 +1555,73 @@ msgid ""
 "environment variables."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:470
+#: xs/src/libslic3r/PrintConfig.cpp:470
 msgid "Soluble material"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:471
+#: xs/src/libslic3r/PrintConfig.cpp:471
 msgid "Soluble material is most likely used for a soluble support."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:476
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:450
+#: xs/src/libslic3r/PrintConfig.cpp:476 lib/Slic3r/GUI/Plater.pm:453
 msgid "Cost"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:477
+#: xs/src/libslic3r/PrintConfig.cpp:477
 msgid ""
 "Enter your filament cost per kg here. This is only for statistical "
 "information."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:478
+#: xs/src/libslic3r/PrintConfig.cpp:478
 msgid "money/kg"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:487
+#: xs/src/libslic3r/PrintConfig.cpp:487
 msgid "Fill angle"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:489
+#: xs/src/libslic3r/PrintConfig.cpp:489
 msgid ""
 "Default base angle for infill orientation. Cross-hatching will be applied to "
 "this. Bridges will be infilled using the best direction Slic3r can detect, "
 "so this setting does not affect them."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:501
+#: xs/src/libslic3r/PrintConfig.cpp:501
 msgid "Fill density"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:503
-#, no-c-format
+#: xs/src/libslic3r/PrintConfig.cpp:503
 msgid "Density of internal infill, expressed in the range 0% - 100%."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:539
+#: xs/src/libslic3r/PrintConfig.cpp:539
 msgid "Fill pattern"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:541
+#: xs/src/libslic3r/PrintConfig.cpp:541
 msgid "Fill pattern for general low-density infill."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:573
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:582
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:591
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:625
+#: xs/src/libslic3r/PrintConfig.cpp:573 xs/src/libslic3r/PrintConfig.cpp:582
+#: xs/src/libslic3r/PrintConfig.cpp:591 xs/src/libslic3r/PrintConfig.cpp:625
 msgid "First layer"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:574
+#: xs/src/libslic3r/PrintConfig.cpp:574
 msgid ""
 "This is the acceleration your printer will use for first layer. Set zero to "
 "disable acceleration control for first layer."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:583
+#: xs/src/libslic3r/PrintConfig.cpp:583
 msgid ""
 "Heated build plate temperature for the first layer. Set this to zero to "
 "disable bed temperature control commands in the output."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:593
+#: xs/src/libslic3r/PrintConfig.cpp:593
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for first "
 "layer. You can use this to force fatter extrudates for better adhesion. If "
@@ -1659,11 +1629,11 @@ msgid ""
 "layer height. If set to zero, it will use the default extrusion width."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:603
+#: xs/src/libslic3r/PrintConfig.cpp:603
 msgid "First layer height"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:605
+#: xs/src/libslic3r/PrintConfig.cpp:605
 msgid ""
 "When printing with very low layer heights, you might still want to print a "
 "thicker bottom layer to improve adhesion and tolerance for non perfect build "
@@ -1671,59 +1641,58 @@ msgid ""
 "example: 150%) over the default layer height."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:609
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:740
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1390
+#: xs/src/libslic3r/PrintConfig.cpp:609 xs/src/libslic3r/PrintConfig.cpp:740
+#: xs/src/libslic3r/PrintConfig.cpp:1397
 msgid "mm or %"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:615
+#: xs/src/libslic3r/PrintConfig.cpp:615
 msgid "First layer speed"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:616
+#: xs/src/libslic3r/PrintConfig.cpp:616
 msgid ""
 "If expressed as absolute value in mm/s, this speed will be applied to all "
 "the print moves of the first layer, regardless of their type. If expressed "
 "as a percentage (for example: 40%) it will scale the default speeds."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:626
+#: xs/src/libslic3r/PrintConfig.cpp:626
 msgid ""
 "Extruder temperature for first layer. If you want to control temperature "
 "manually during print, set this to zero to disable temperature control "
 "commands in the output file."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:634
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:145
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:87
+#: xs/src/libslic3r/PrintConfig.cpp:634
+#: xs/src/libslic3r/GCode/PreviewData.cpp:145
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:87
 msgid "Gap fill"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:636
+#: xs/src/libslic3r/PrintConfig.cpp:636
 msgid ""
 "Speed for filling small gaps using short zigzag moves. Keep this reasonably "
 "low to avoid too much shaking and resonance issues. Set zero to disable gaps "
 "filling."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:644
+#: xs/src/libslic3r/PrintConfig.cpp:644
 msgid "Verbose G-code"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:645
+#: xs/src/libslic3r/PrintConfig.cpp:645
 msgid ""
 "Enable this to get a commented G-code file, with each line explained by a "
 "descriptive text. If you print from SD card, the additional weight of the "
 "file could make your firmware slow down."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:652
+#: xs/src/libslic3r/PrintConfig.cpp:652
 msgid "G-code flavor"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:653
+#: xs/src/libslic3r/PrintConfig.cpp:653
 msgid ""
 "Some G/M-code commands, including temperature control and others, are not "
 "universal. Set this option to your printer's firmware to get a compatible "
@@ -1731,35 +1700,35 @@ msgid ""
 "extrusion value at all."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:682
+#: xs/src/libslic3r/PrintConfig.cpp:682
 msgid ""
 "This is the acceleration your printer will use for infill. Set zero to "
 "disable acceleration control for infill."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:690
+#: xs/src/libslic3r/PrintConfig.cpp:690
 msgid "Combine infill every"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:692
+#: xs/src/libslic3r/PrintConfig.cpp:692
 msgid ""
 "This feature allows to combine infill and speed up your print by extruding "
 "thicker infill layers while preserving thin perimeters, thus accuracy."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:696
+#: xs/src/libslic3r/PrintConfig.cpp:696
 msgid "Combine infill every n layers"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:701
+#: xs/src/libslic3r/PrintConfig.cpp:701
 msgid "Infill extruder"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:703
+#: xs/src/libslic3r/PrintConfig.cpp:703
 msgid "The extruder to use when printing infill."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:711
+#: xs/src/libslic3r/PrintConfig.cpp:711
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill. If "
 "left zero, default extrusion width will be used if set, otherwise 1.125 x "
@@ -1768,32 +1737,32 @@ msgid ""
 "example 90%) it will be computed over layer height."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:720
+#: xs/src/libslic3r/PrintConfig.cpp:720
 msgid "Infill before perimeters"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:721
+#: xs/src/libslic3r/PrintConfig.cpp:721
 msgid ""
 "This option will switch the print order of perimeters and infill, making the "
 "latter first."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:726
+#: xs/src/libslic3r/PrintConfig.cpp:726
 msgid "Only infill where needed"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:728
+#: xs/src/libslic3r/PrintConfig.cpp:728
 msgid ""
 "This option will limit infill to the areas actually needed for supporting "
 "ceilings (it will act as internal support material). If enabled, slows down "
 "the G-code generation due to the multiple checks involved."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:735
+#: xs/src/libslic3r/PrintConfig.cpp:735
 msgid "Infill/perimeters overlap"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:737
+#: xs/src/libslic3r/PrintConfig.cpp:737
 msgid ""
 "This setting applies an additional overlap between infill and perimeters for "
 "better bonding. Theoretically this shouldn't be needed, but backlash might "
@@ -1801,22 +1770,22 @@ msgid ""
 "perimeter extrusion width."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:748
+#: xs/src/libslic3r/PrintConfig.cpp:748
 msgid "Speed for printing the internal fill. Set to zero for auto."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:757
+#: xs/src/libslic3r/PrintConfig.cpp:757
 msgid "Interface shells"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:758
+#: xs/src/libslic3r/PrintConfig.cpp:758
 msgid ""
 "Force the generation of solid shells between adjacent materials/volumes. "
 "Useful for multi-extruder prints with translucent materials or manual "
 "soluble support material."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:767
+#: xs/src/libslic3r/PrintConfig.cpp:767
 msgid ""
 "This custom code is inserted at every layer change, right after the Z move "
 "and before the extruder moves to the first layer point. Note that you can "
@@ -1824,23 +1793,22 @@ msgid ""
 "[layer_z]."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:779
+#: xs/src/libslic3r/PrintConfig.cpp:779
 msgid ""
 "This setting controls the height (and thus the total number) of the slices/"
 "layers. Thinner layers give better accuracy but take more time to print."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:787
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:796
+#: xs/src/libslic3r/PrintConfig.cpp:787 xs/src/libslic3r/PrintConfig.cpp:796
 msgid "Max"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:788
+#: xs/src/libslic3r/PrintConfig.cpp:788
 msgid "This setting represents the maximum speed of your fan."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:797
-#, no-c-format
+#: xs/src/libslic3r/PrintConfig.cpp:797
+#, possible-c-format
 msgid ""
 "This is the highest printable layer height for this extruder, used to cap "
 "the variable layer height and support layer height. Maximum recommended "
@@ -1848,29 +1816,28 @@ msgid ""
 "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:807
+#: xs/src/libslic3r/PrintConfig.cpp:807
 msgid "Max print speed"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:808
+#: xs/src/libslic3r/PrintConfig.cpp:808
 msgid ""
 "When setting other speed settings to 0 Slic3r will autocalculate the optimal "
 "speed in order to keep constant extruder pressure. This experimental setting "
 "is used to set the highest print speed you want to allow."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:818
+#: xs/src/libslic3r/PrintConfig.cpp:818
 msgid ""
 "This experimental setting is used to set the maximum volumetric speed your "
 "extruder supports."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:826
+#: xs/src/libslic3r/PrintConfig.cpp:826
 msgid "Max volumetric slope positive"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:827
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:838
+#: xs/src/libslic3r/PrintConfig.cpp:827 xs/src/libslic3r/PrintConfig.cpp:838
 msgid ""
 "This experimental setting is used to limit the speed of change in extrusion "
 "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
@@ -1878,111 +1845,109 @@ msgid ""
 "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:831
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:842
+#: xs/src/libslic3r/PrintConfig.cpp:831 xs/src/libslic3r/PrintConfig.cpp:842
 msgid "mm³/s²"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:837
+#: xs/src/libslic3r/PrintConfig.cpp:837
 msgid "Max volumetric slope negative"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:848
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:857
+#: xs/src/libslic3r/PrintConfig.cpp:848 xs/src/libslic3r/PrintConfig.cpp:857
 msgid "Min"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:849
+#: xs/src/libslic3r/PrintConfig.cpp:849
 msgid "This setting represents the minimum PWM your fan needs to work."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:858
+#: xs/src/libslic3r/PrintConfig.cpp:858
 msgid ""
 "This is the lowest printable layer height for this extruder and limits the "
 "resolution for variable layer height. Typical values are between 0.05 mm and "
 "0.1 mm."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:866
+#: xs/src/libslic3r/PrintConfig.cpp:866
 msgid "Min print speed"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:867
+#: xs/src/libslic3r/PrintConfig.cpp:867
 msgid "Slic3r will not scale speed down below this speed."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:874
+#: xs/src/libslic3r/PrintConfig.cpp:874
 msgid "Minimum extrusion length"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:875
+#: xs/src/libslic3r/PrintConfig.cpp:875
 msgid ""
 "Generate no less than the number of skirt loops required to consume the "
 "specified amount of filament on the bottom layer. For multi-extruder "
 "machines, this minimum applies to each extruder."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:884
+#: xs/src/libslic3r/PrintConfig.cpp:884
 msgid "Configuration notes"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:885
+#: xs/src/libslic3r/PrintConfig.cpp:885
 msgid ""
 "You can put here your personal notes. This text will be added to the G-code "
 "header comments."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:894
+#: xs/src/libslic3r/PrintConfig.cpp:894
 msgid "Nozzle diameter"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:895
+#: xs/src/libslic3r/PrintConfig.cpp:895
 msgid ""
 "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:901
+#: xs/src/libslic3r/PrintConfig.cpp:901
 msgid "API Key"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:902
+#: xs/src/libslic3r/PrintConfig.cpp:902
 msgid ""
 "Slic3r can upload G-code files to OctoPrint. This field should contain the "
 "API Key required for authentication."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:908
-msgid "Host or IP"
+#: xs/src/libslic3r/PrintConfig.cpp:915
+msgid "Hostname, IP or URL"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:909
+#: xs/src/libslic3r/PrintConfig.cpp:916
 msgid ""
 "Slic3r can upload G-code files to OctoPrint. This field should contain the "
-"hostname or IP address of the OctoPrint instance."
+"hostname, IP address or URL of the OctoPrint instance."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:915
+#: xs/src/libslic3r/PrintConfig.cpp:922
 msgid "Only retract when crossing perimeters"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:916
+#: xs/src/libslic3r/PrintConfig.cpp:923
 msgid ""
 "Disables retraction when the travel path does not exceed the upper layer's "
 "perimeters (and thus any ooze will be probably invisible)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:923
+#: xs/src/libslic3r/PrintConfig.cpp:930
 msgid ""
 "This option will drop the temperature of the inactive extruders to prevent "
 "oozing. It will enable a tall skirt automatically and move extruders outside "
 "such skirt when changing temperatures."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:930
+#: xs/src/libslic3r/PrintConfig.cpp:937
 msgid "Output filename format"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:931
+#: xs/src/libslic3r/PrintConfig.cpp:938
 msgid ""
 "You can use all configuration options as variables inside this template. For "
 "example: [layer_height], [fill_density] etc. You can also use [timestamp], "
@@ -1990,40 +1955,38 @@ msgid ""
 "[input_filename], [input_filename_base]."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:940
+#: xs/src/libslic3r/PrintConfig.cpp:947
 msgid "Detect bridging perimeters"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:942
+#: xs/src/libslic3r/PrintConfig.cpp:949
 msgid ""
 "Experimental option to adjust flow for overhangs (bridge flow will be used), "
 "to apply bridge speed to them and enable fan."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:948
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:966
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:978
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:988
+#: xs/src/libslic3r/PrintConfig.cpp:955 xs/src/libslic3r/PrintConfig.cpp:973
+#: xs/src/libslic3r/PrintConfig.cpp:985 xs/src/libslic3r/PrintConfig.cpp:995
 msgid "Perimeters"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:949
+#: xs/src/libslic3r/PrintConfig.cpp:956
 msgid ""
 "This is the acceleration your printer will use for perimeters. A high value "
 "like 9000 usually gives good results if your hardware is up to the job. Set "
 "zero to disable acceleration control for perimeters."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:957
+#: xs/src/libslic3r/PrintConfig.cpp:964
 msgid "Perimeter extruder"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:959
+#: xs/src/libslic3r/PrintConfig.cpp:966
 msgid ""
 "The extruder to use when printing perimeters and brim. First extruder is 1."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:968
+#: xs/src/libslic3r/PrintConfig.cpp:975
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for perimeters. "
 "You may want to use thinner extrudates to get more accurate surfaces. If "
@@ -2032,12 +1995,12 @@ msgid ""
 "it will be computed over layer height."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:980
+#: xs/src/libslic3r/PrintConfig.cpp:987
 msgid ""
 "Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:990
+#: xs/src/libslic3r/PrintConfig.cpp:997
 msgid ""
 "This option sets the number of perimeters to generate for each layer. Note "
 "that Slic3r may increase this number automatically when it detects sloping "
@@ -2045,33 +2008,33 @@ msgid ""
 "Perimeters option is enabled."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:994
+#: xs/src/libslic3r/PrintConfig.cpp:1001
 msgid "(minimum)"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1014
+#: xs/src/libslic3r/PrintConfig.cpp:1021
 msgid "Printer notes"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1015
+#: xs/src/libslic3r/PrintConfig.cpp:1022
 msgid "You can put your notes regarding the printer here."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1029
+#: xs/src/libslic3r/PrintConfig.cpp:1036
 msgid "Raft layers"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1031
+#: xs/src/libslic3r/PrintConfig.cpp:1038
 msgid ""
 "The object will be raised by this number of layers, and support material "
 "will be generated under it."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1039
+#: xs/src/libslic3r/PrintConfig.cpp:1046
 msgid "Resolution"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1040
+#: xs/src/libslic3r/PrintConfig.cpp:1047
 msgid ""
 "Minimum detail resolution, used to simplify the input file for speeding up "
 "the slicing job and reducing memory usage. High-resolution models often "
@@ -2079,271 +2042,266 @@ msgid ""
 "simplification and use full resolution from input."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1050
+#: xs/src/libslic3r/PrintConfig.cpp:1057
 msgid "Minimum travel after retraction"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1051
+#: xs/src/libslic3r/PrintConfig.cpp:1058
 msgid ""
 "Retraction is not triggered when travel moves are shorter than this length."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1057
+#: xs/src/libslic3r/PrintConfig.cpp:1064
 msgid "Retract amount before wipe"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1058
+#: xs/src/libslic3r/PrintConfig.cpp:1065
 msgid ""
 "With bowden extruders, it may be wise to do some amount of quick retract "
 "before doing the wipe movement."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1065
+#: xs/src/libslic3r/PrintConfig.cpp:1072
 msgid "Retract on layer change"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1066
+#: xs/src/libslic3r/PrintConfig.cpp:1073
 msgid "This flag enforces a retraction whenever a Z move is done."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1071
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1080
+#: xs/src/libslic3r/PrintConfig.cpp:1078 xs/src/libslic3r/PrintConfig.cpp:1087
 msgid "Length"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1072
+#: xs/src/libslic3r/PrintConfig.cpp:1079
 msgid "Retraction Length"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1073
+#: xs/src/libslic3r/PrintConfig.cpp:1080
 msgid ""
 "When retraction is triggered, filament is pulled back by the specified "
 "amount (the length is measured on raw filament, before it enters the "
 "extruder)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1075
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1085
+#: xs/src/libslic3r/PrintConfig.cpp:1082 xs/src/libslic3r/PrintConfig.cpp:1092
 msgid "mm (zero to disable)"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1081
+#: xs/src/libslic3r/PrintConfig.cpp:1088
 msgid "Retraction Length (Toolchange)"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1082
+#: xs/src/libslic3r/PrintConfig.cpp:1089
 msgid ""
 "When retraction is triggered before changing tool, filament is pulled back "
 "by the specified amount (the length is measured on raw filament, before it "
 "enters the extruder)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1090
+#: xs/src/libslic3r/PrintConfig.cpp:1097
 msgid "Lift Z"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1091
+#: xs/src/libslic3r/PrintConfig.cpp:1098
 msgid ""
 "If you set this to a positive value, Z is quickly raised every time a "
 "retraction is triggered. When using multiple extruders, only the setting for "
 "the first extruder will be considered."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1099
+#: xs/src/libslic3r/PrintConfig.cpp:1106
 msgid "Above Z"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1100
+#: xs/src/libslic3r/PrintConfig.cpp:1107
 msgid "Only lift Z above"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1101
+#: xs/src/libslic3r/PrintConfig.cpp:1108
 msgid ""
 "If you set this to a positive value, Z lift will only take place above the "
 "specified absolute Z. You can tune this setting for skipping lift on the "
 "first layers."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1108
+#: xs/src/libslic3r/PrintConfig.cpp:1115
 msgid "Below Z"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1109
+#: xs/src/libslic3r/PrintConfig.cpp:1116
 msgid "Only lift Z below"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1110
+#: xs/src/libslic3r/PrintConfig.cpp:1117
 msgid ""
 "If you set this to a positive value, Z lift will only take place below the "
 "specified absolute Z. You can tune this setting for limiting lift to the "
 "first layers."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1118
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1126
+#: xs/src/libslic3r/PrintConfig.cpp:1125 xs/src/libslic3r/PrintConfig.cpp:1133
 msgid "Extra length on restart"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1119
+#: xs/src/libslic3r/PrintConfig.cpp:1126
 msgid ""
 "When the retraction is compensated after the travel move, the extruder will "
 "push this additional amount of filament. This setting is rarely needed."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1127
+#: xs/src/libslic3r/PrintConfig.cpp:1134
 msgid ""
 "When the retraction is compensated after changing tool, the extruder will "
 "push this additional amount of filament."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1134
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1135
+#: xs/src/libslic3r/PrintConfig.cpp:1141 xs/src/libslic3r/PrintConfig.cpp:1142
 msgid "Retraction Speed"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1136
+#: xs/src/libslic3r/PrintConfig.cpp:1143
 msgid "The speed for retractions (it only applies to the extruder motor)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1142
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1143
+#: xs/src/libslic3r/PrintConfig.cpp:1149 xs/src/libslic3r/PrintConfig.cpp:1150
 msgid "Deretraction Speed"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1144
+#: xs/src/libslic3r/PrintConfig.cpp:1151
 msgid ""
 "The speed for loading of a filament into extruder after retraction (it only "
 "applies to the extruder motor). If left to zero, the retraction speed is "
 "used."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1151
+#: xs/src/libslic3r/PrintConfig.cpp:1158
 msgid "Seam position"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1153
+#: xs/src/libslic3r/PrintConfig.cpp:1160
 msgid "Position of perimeters starting points."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1169
+#: xs/src/libslic3r/PrintConfig.cpp:1176
 msgid "Direction"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1171
+#: xs/src/libslic3r/PrintConfig.cpp:1178
 msgid "Preferred direction of the seam"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1172
+#: xs/src/libslic3r/PrintConfig.cpp:1179
 msgid "Seam preferred direction"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1180
+#: xs/src/libslic3r/PrintConfig.cpp:1187
 msgid "Jitter"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1182
+#: xs/src/libslic3r/PrintConfig.cpp:1189
 msgid "Seam preferred direction jitter"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1183
+#: xs/src/libslic3r/PrintConfig.cpp:1190
 msgid "Preferred direction of the seam - jitter"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1194
+#: xs/src/libslic3r/PrintConfig.cpp:1201
 msgid "USB/serial port for printer connection."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1202
+#: xs/src/libslic3r/PrintConfig.cpp:1209
 msgid "Serial port speed"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1203
+#: xs/src/libslic3r/PrintConfig.cpp:1210
 msgid "Speed (baud) of USB/serial port for printer connection."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1212
+#: xs/src/libslic3r/PrintConfig.cpp:1219
 msgid "Distance from object"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1213
+#: xs/src/libslic3r/PrintConfig.cpp:1220
 msgid ""
 "Distance between skirt and object(s). Set this to zero to attach the skirt "
 "to the object(s) and get a brim for better adhesion."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1221
+#: xs/src/libslic3r/PrintConfig.cpp:1228
 msgid "Skirt height"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1222
+#: xs/src/libslic3r/PrintConfig.cpp:1229
 msgid ""
 "Height of skirt expressed in layers. Set this to a tall value to use skirt "
 "as a shield against drafts."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1229
+#: xs/src/libslic3r/PrintConfig.cpp:1236
 msgid "Loops (minimum)"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1230
+#: xs/src/libslic3r/PrintConfig.cpp:1237
 msgid "Skirt Loops"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1231
+#: xs/src/libslic3r/PrintConfig.cpp:1238
 msgid ""
 "Number of loops for the skirt. If the Minimum Extrusion Length option is "
 "set, the number of loops might be greater than the one configured here. Set "
 "this to zero to disable skirt completely."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1239
+#: xs/src/libslic3r/PrintConfig.cpp:1246
 msgid "Slow down if layer print time is below"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1240
+#: xs/src/libslic3r/PrintConfig.cpp:1247
 msgid ""
 "If layer print time is estimated below this number of seconds, print moves "
 "speed will be scaled down to extend duration to this value."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1250
+#: xs/src/libslic3r/PrintConfig.cpp:1257
 msgid "Small perimeters"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1252
+#: xs/src/libslic3r/PrintConfig.cpp:1259
 msgid ""
 "This separate setting will affect the speed of perimeters having radius <= "
 "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
 "be calculated on the perimeters speed setting above. Set to zero for auto."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1262
+#: xs/src/libslic3r/PrintConfig.cpp:1269
 msgid "Solid infill threshold area"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1264
+#: xs/src/libslic3r/PrintConfig.cpp:1271
 msgid ""
 "Force solid infill for regions having a smaller area than the specified "
 "threshold."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1265
+#: xs/src/libslic3r/PrintConfig.cpp:1272
 msgid "mm²"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1271
+#: xs/src/libslic3r/PrintConfig.cpp:1278
 msgid "Solid infill extruder"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1273
+#: xs/src/libslic3r/PrintConfig.cpp:1280
 msgid "The extruder to use when printing solid infill."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1279
+#: xs/src/libslic3r/PrintConfig.cpp:1286
 msgid "Solid infill every"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1281
+#: xs/src/libslic3r/PrintConfig.cpp:1288
 msgid ""
 "This feature allows to force a solid layer every given number of layers. "
 "Zero to disable. You can set this to any value (for example 9999); Slic3r "
@@ -2351,14 +2309,13 @@ msgid ""
 "according to nozzle diameter and layer height."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1291
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1301
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:142
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:84
+#: xs/src/libslic3r/PrintConfig.cpp:1298 xs/src/libslic3r/PrintConfig.cpp:1308
+#: xs/src/libslic3r/GCode/PreviewData.cpp:142
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:84
 msgid "Solid infill"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1293
+#: xs/src/libslic3r/PrintConfig.cpp:1300
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "solid surfaces. If left zero, default extrusion width will be used if set, "
@@ -2366,22 +2323,22 @@ msgid ""
 "(for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1303
+#: xs/src/libslic3r/PrintConfig.cpp:1310
 msgid ""
 "Speed for printing solid regions (top/bottom/internal horizontal shells). "
 "This can be expressed as a percentage (for example: 80%) over the default "
 "infill speed above. Set to zero for auto."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1315
+#: xs/src/libslic3r/PrintConfig.cpp:1322
 msgid "Number of solid layers to generate on top and bottom surfaces."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1322
+#: xs/src/libslic3r/PrintConfig.cpp:1329
 msgid "Spiral vase"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1323
+#: xs/src/libslic3r/PrintConfig.cpp:1330
 msgid ""
 "This feature will raise Z gradually while printing a single-walled object in "
 "order to remove any visible seam. This option requires a single perimeter, "
@@ -2390,18 +2347,18 @@ msgid ""
 "when printing more than an object."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1332
+#: xs/src/libslic3r/PrintConfig.cpp:1339
 msgid "Temperature variation"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1333
+#: xs/src/libslic3r/PrintConfig.cpp:1340
 msgid ""
 "Temperature difference to be applied when an extruder is not active. Enables "
 "a full-height \"sacrificial\" skirt on which the nozzles are periodically "
 "wiped."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1343
+#: xs/src/libslic3r/PrintConfig.cpp:1350
 msgid ""
 "This start procedure is inserted at the beginning, after bed has reached the "
 "target temperature and extruder just started heating, and before extruder "
@@ -2412,80 +2369,76 @@ msgid ""
 "\"M109 S[first_layer_temperature]\" command wherever you want."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1358
+#: xs/src/libslic3r/PrintConfig.cpp:1365
 msgid ""
 "This start procedure is inserted at the beginning, after any printer start "
 "gcode. This is used to override settings for a specific filament. If Slic3r "
 "detects M104, M109, M140 or M190 in your custom codes, such commands will "
 "not be prepended automatically so you're free to customize the order of "
 "heating commands and other custom actions. Note that you can use placeholder "
-"variables for all Slic3r settings, so you can put a \"M109 S"
-"[first_layer_temperature]\" command wherever you want. If you have multiple "
+"variables for all Slic3r settings, so you can put a \"M109 "
+"S[first_layer_temperature]\" command wherever you want. If you have multiple "
 "extruders, the gcode is processed in extruder order."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1373
+#: xs/src/libslic3r/PrintConfig.cpp:1380
 msgid "Single Extruder Multi Material"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1374
+#: xs/src/libslic3r/PrintConfig.cpp:1381
 msgid "The printer multiplexes filaments into a single hot end."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1379
+#: xs/src/libslic3r/PrintConfig.cpp:1386
 msgid "Generate support material"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1381
+#: xs/src/libslic3r/PrintConfig.cpp:1388
 msgid "Enable support material generation."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1386
+#: xs/src/libslic3r/PrintConfig.cpp:1393
 msgid "XY separation between an object and its support"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1388
+#: xs/src/libslic3r/PrintConfig.cpp:1395
 msgid ""
 "XY separation between an object and its support. If expressed as percentage "
 "(for example 50%), it will be calculated over external perimeter width."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1398
+#: xs/src/libslic3r/PrintConfig.cpp:1405
 msgid "Pattern angle"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1400
+#: xs/src/libslic3r/PrintConfig.cpp:1407
 msgid ""
 "Use this setting to rotate the support material pattern on the horizontal "
 "plane."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1408
-msgid "Support on build plate only"
-msgstr ""
-
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1410
+#: xs/src/libslic3r/PrintConfig.cpp:1417
 msgid ""
 "Only create support if it lies on a build plate. Don't create support on a "
 "print."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1416
+#: xs/src/libslic3r/PrintConfig.cpp:1423
 msgid "Contact Z distance"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1418
+#: xs/src/libslic3r/PrintConfig.cpp:1425
 msgid ""
 "The vertical distance between object and support material interface. Setting "
 "this to 0 will also prevent Slic3r from using bridge flow and speed for the "
 "first object layer."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1431
+#: xs/src/libslic3r/PrintConfig.cpp:1438
 msgid "Enforce support for the first"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1433
+#: xs/src/libslic3r/PrintConfig.cpp:1440
 msgid ""
 "Generate support material for the specified number of layers counting from "
 "bottom, regardless of whether normal support material is enabled or not and "
@@ -2493,21 +2446,21 @@ msgid ""
 "of objects having a very thin or poor footprint on the build plate."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1439
+#: xs/src/libslic3r/PrintConfig.cpp:1446
 msgid "Enforce support for the first n layers"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1444
+#: xs/src/libslic3r/PrintConfig.cpp:1451
 msgid "Support material/raft/skirt extruder"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1446
+#: xs/src/libslic3r/PrintConfig.cpp:1453
 msgid ""
 "The extruder to use when printing support material, raft and skirt (1+, 0 to "
 "use the current extruder to minimize tool changes)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1455
+#: xs/src/libslic3r/PrintConfig.cpp:1462
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for support "
 "material. If left zero, default extrusion width will be used if set, "
@@ -2515,91 +2468,91 @@ msgid ""
 "example 90%) it will be computed over layer height."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1463
+#: xs/src/libslic3r/PrintConfig.cpp:1470
 msgid "Interface loops"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1465
+#: xs/src/libslic3r/PrintConfig.cpp:1472
 msgid ""
 "Cover the top contact layer of the supports with loops. Disabled by default."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1470
+#: xs/src/libslic3r/PrintConfig.cpp:1477
 msgid "Support material/raft interface extruder"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1472
+#: xs/src/libslic3r/PrintConfig.cpp:1479
 msgid ""
 "The extruder to use when printing support material interface (1+, 0 to use "
 "the current extruder to minimize tool changes). This affects raft too."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1479
+#: xs/src/libslic3r/PrintConfig.cpp:1486
 msgid "Interface layers"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1481
+#: xs/src/libslic3r/PrintConfig.cpp:1488
 msgid ""
 "Number of interface layers to insert between the object(s) and support "
 "material."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1488
+#: xs/src/libslic3r/PrintConfig.cpp:1495
 msgid "Interface pattern spacing"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1490
+#: xs/src/libslic3r/PrintConfig.cpp:1497
 msgid "Spacing between interface lines. Set zero to get a solid interface."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1497
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:148
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:90
+#: xs/src/libslic3r/PrintConfig.cpp:1504
+#: xs/src/libslic3r/GCode/PreviewData.cpp:148
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:90
 msgid "Support material interface"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1499
+#: xs/src/libslic3r/PrintConfig.cpp:1506
 msgid ""
 "Speed for printing support material interface layers. If expressed as "
 "percentage (for example 50%) it will be calculated over support material "
 "speed."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1508
+#: xs/src/libslic3r/PrintConfig.cpp:1515
 msgid "Pattern"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1510
+#: xs/src/libslic3r/PrintConfig.cpp:1517
 msgid "Pattern used to generate support material."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1524
+#: xs/src/libslic3r/PrintConfig.cpp:1531
 msgid "Pattern spacing"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1526
+#: xs/src/libslic3r/PrintConfig.cpp:1533
 msgid "Spacing between support material lines."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1535
+#: xs/src/libslic3r/PrintConfig.cpp:1542
 msgid "Speed for printing support material."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1542
+#: xs/src/libslic3r/PrintConfig.cpp:1549
 msgid "Synchronize with object layers"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1544
+#: xs/src/libslic3r/PrintConfig.cpp:1551
 msgid ""
 "Synchronize support layers with the object print layers. This is useful with "
 "multi-material printers, where the extruder switch is expensive."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1550
+#: xs/src/libslic3r/PrintConfig.cpp:1557
 msgid "Overhang threshold"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1552
+#: xs/src/libslic3r/PrintConfig.cpp:1559
 msgid ""
 "Support material will not be generated for overhangs whose slope angle (90° "
 "= vertical) is above the given threshold. In other words, this value "
@@ -2608,61 +2561,60 @@ msgid ""
 "detection (recommended)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1564
+#: xs/src/libslic3r/PrintConfig.cpp:1571
 msgid "With sheath around the support"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1566
+#: xs/src/libslic3r/PrintConfig.cpp:1573
 msgid ""
 "Add a sheath (a single perimeter line) around the base support. This makes "
 "the support more reliable, but also more difficult to remove."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1573
+#: xs/src/libslic3r/PrintConfig.cpp:1580
 msgid ""
 "Extruder temperature for layers after the first one. Set this to zero to "
 "disable temperature control commands in the output."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1576
+#: xs/src/libslic3r/PrintConfig.cpp:1583
 msgid "Temperature"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1582
+#: xs/src/libslic3r/PrintConfig.cpp:1589
 msgid "Detect thin walls"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1584
+#: xs/src/libslic3r/PrintConfig.cpp:1591
 msgid ""
 "Detect single-width walls (parts where two extrusions don't fit and we need "
 "to collapse them into a single trace)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1590
+#: xs/src/libslic3r/PrintConfig.cpp:1597
 msgid "Threads"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1591
+#: xs/src/libslic3r/PrintConfig.cpp:1598
 msgid ""
 "Threads are used to parallelize long-running tasks. Optimal threads number "
 "is slightly above the number of available cores/processors."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1603
+#: xs/src/libslic3r/PrintConfig.cpp:1610
 msgid ""
 "This custom code is inserted right before every extruder change. Note that "
 "you can use placeholder variables for all Slic3r settings as well as "
 "[previous_extruder] and [next_extruder]."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1613
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1624
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:143
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:85
+#: xs/src/libslic3r/PrintConfig.cpp:1620 xs/src/libslic3r/PrintConfig.cpp:1631
+#: xs/src/libslic3r/GCode/PreviewData.cpp:143
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:85
 msgid "Top solid infill"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1615
+#: xs/src/libslic3r/PrintConfig.cpp:1622
 msgid ""
 "Set this to a non-zero value to set a manual extrusion width for infill for "
 "top surfaces. You may want to use thinner extrudates to fill all narrow "
@@ -2671,7 +2623,7 @@ msgid ""
 "percentage (for example 90%) it will be computed over layer height."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1626
+#: xs/src/libslic3r/PrintConfig.cpp:1633
 msgid ""
 "Speed for printing top solid layers (it only applies to the uppermost "
 "external layers and not to their internal solid layers). You may want to "
@@ -2680,53 +2632,51 @@ msgid ""
 "for auto."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1638
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:369
+#: xs/src/libslic3r/PrintConfig.cpp:1645 lib/Slic3r/GUI/MainFrame.pm:363
 msgid "Top"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1640
+#: xs/src/libslic3r/PrintConfig.cpp:1647
 msgid "Number of solid layers to generate on top surfaces."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1642
+#: xs/src/libslic3r/PrintConfig.cpp:1649
 msgid "Top solid layers"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1647
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:95
+#: xs/src/libslic3r/PrintConfig.cpp:1654 lib/Slic3r/GUI/Plater/3DPreview.pm:95
 msgid "Travel"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1648
+#: xs/src/libslic3r/PrintConfig.cpp:1655
 msgid "Speed for travel moves (jumps between distant extrusion points)."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1656
+#: xs/src/libslic3r/PrintConfig.cpp:1663
 msgid "Use firmware retraction"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1657
+#: xs/src/libslic3r/PrintConfig.cpp:1664
 msgid ""
 "This experimental setting uses G10 and G11 commands to have the firmware "
 "handle the retraction. This is only supported in recent Marlin."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1663
+#: xs/src/libslic3r/PrintConfig.cpp:1670
 msgid "Use relative E distances"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1664
+#: xs/src/libslic3r/PrintConfig.cpp:1671
 msgid ""
 "If your firmware requires relative E values, check this, otherwise leave it "
 "unchecked. Most firmwares use absolute values."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1670
+#: xs/src/libslic3r/PrintConfig.cpp:1677
 msgid "Use volumetric E"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1671
+#: xs/src/libslic3r/PrintConfig.cpp:1678
 msgid ""
 "This experimental setting uses outputs the E values in cubic millimeters "
 "instead of linear millimeters. If your firmware doesn't already know "
@@ -2736,84 +2686,83 @@ msgid ""
 "only supported in recent Marlin."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1681
+#: xs/src/libslic3r/PrintConfig.cpp:1688
 msgid "Enable variable layer height feature"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1682
+#: xs/src/libslic3r/PrintConfig.cpp:1689
 msgid ""
 "Some printers or printer setups may have difficulties printing with a "
 "variable layer height. Enabled by default."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1688
+#: xs/src/libslic3r/PrintConfig.cpp:1695
 msgid "Wipe while retracting"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1689
+#: xs/src/libslic3r/PrintConfig.cpp:1696
 msgid ""
 "This flag will move the nozzle while retracting to minimize the possible "
 "blob on leaky extruders."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1696
+#: xs/src/libslic3r/PrintConfig.cpp:1703
 msgid ""
 "Multi material printers may need to prime or purge extruders on tool "
 "changes. Extrude the excess material into the wipe tower."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1702
+#: xs/src/libslic3r/PrintConfig.cpp:1709
 msgid "Position X"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1703
+#: xs/src/libslic3r/PrintConfig.cpp:1710
 msgid "X coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1709
+#: xs/src/libslic3r/PrintConfig.cpp:1716
 msgid "Position Y"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1710
+#: xs/src/libslic3r/PrintConfig.cpp:1717
 msgid "Y coordinate of the left front corner of a wipe tower"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1716
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:70
+#: xs/src/libslic3r/PrintConfig.cpp:1723 lib/Slic3r/GUI/Plater/3DPreview.pm:70
 msgid "Width"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1717
+#: xs/src/libslic3r/PrintConfig.cpp:1724
 msgid "Width of a wipe tower"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1723
+#: xs/src/libslic3r/PrintConfig.cpp:1730
 msgid "Per color change depth"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1724
+#: xs/src/libslic3r/PrintConfig.cpp:1731
 msgid ""
 "Depth of a wipe color per color change. For N colors, there will be maximum "
 "(N-1) tool switches performed, therefore the total depth of the wipe tower "
 "will be (N-1) times this value."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1732
+#: xs/src/libslic3r/PrintConfig.cpp:1739
 msgid "XY Size Compensation"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1734
+#: xs/src/libslic3r/PrintConfig.cpp:1741
 msgid ""
 "The object will be grown/shrunk in the XY plane by the configured value "
 "(negative = inwards, positive = outwards). This might be useful for fine-"
 "tuning hole sizes."
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1742
+#: xs/src/libslic3r/PrintConfig.cpp:1749
 msgid "Z offset"
 msgstr ""
 
-#: C:\src\Slic3r\xs\src\libslic3r\PrintConfig.cpp:1743
+#: xs/src/libslic3r/PrintConfig.cpp:1750
 msgid ""
 "This value will be added (or subtracted) from all the Z coordinates in the "
 "output G-code. It is used to compensate for bad Z endstop position: for "
@@ -2821,1063 +2770,1015 @@ msgid ""
 "print bed, set this to -0.3 (or fix your endstop)."
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:137
-msgid "None"
-msgstr ""
-
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:138
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:80
+#: xs/src/libslic3r/GCode/PreviewData.cpp:138
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:80
 msgid "Perimeter"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:139
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:81
+#: xs/src/libslic3r/GCode/PreviewData.cpp:139
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:81
 msgid "External perimeter"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:140
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:82
+#: xs/src/libslic3r/GCode/PreviewData.cpp:140
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:82
 msgid "Overhang perimeter"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:141
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:83
+#: xs/src/libslic3r/GCode/PreviewData.cpp:141
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:83
 msgid "Internal infill"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:144
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:86
+#: xs/src/libslic3r/GCode/PreviewData.cpp:144
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:86
 msgid "Bridge infill"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:151
+#: xs/src/libslic3r/GCode/PreviewData.cpp:151
 msgid "Mixed"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:330
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:68
+#: xs/src/libslic3r/GCode/PreviewData.cpp:330
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:68
 msgid "Feature type"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:332
+#: xs/src/libslic3r/GCode/PreviewData.cpp:332
 msgid "Height (mm)"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:334
+#: xs/src/libslic3r/GCode/PreviewData.cpp:334
 msgid "Width (mm)"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:336
+#: xs/src/libslic3r/GCode/PreviewData.cpp:336
 msgid "Speed (mm/s)"
 msgstr ""
 
-#: c:\src\Slic3r\xs\src\libslic3r\GCode\PreviewData.cpp:338
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:72
+#: xs/src/libslic3r/GCode/PreviewData.cpp:338
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:72
 msgid "Tool"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI.pm:286
-msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
-msgstr ""
-
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:66
+#: lib/Slic3r/GUI/MainFrame.pm:66
 msgid "Version "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:66
+#: lib/Slic3r/GUI/MainFrame.pm:66
 msgid ""
 " - Remember to check for updates at http://github.com/prusa3d/slic3r/releases"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:118
+#: lib/Slic3r/GUI/MainFrame.pm:118
 msgid "Plater"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:120
+#: lib/Slic3r/GUI/MainFrame.pm:120
 msgid "Controller"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:192
+#: lib/Slic3r/GUI/MainFrame.pm:191
 msgid "No Bonjour device found"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:192
+#: lib/Slic3r/GUI/MainFrame.pm:191
 msgid "Device Browser"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:211
-msgid "Connection to OctoPrint works correctly."
-msgstr ""
-
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:214
+#: lib/Slic3r/GUI/MainFrame.pm:212
 msgid "I wasn't able to connect to OctoPrint ("
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:215
+#: lib/Slic3r/GUI/MainFrame.pm:213
 msgid "). Check hostname and OctoPrint version (at least 1.1.0 is required)."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:251
+#: lib/Slic3r/GUI/MainFrame.pm:245
 msgid "Open STL/OBJ/AMFâ€Ĥ\tCtrl+O"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:251
+#: lib/Slic3r/GUI/MainFrame.pm:245
 msgid "Open a model"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:254
+#: lib/Slic3r/GUI/MainFrame.pm:248
 msgid "&Load Configâ€Ĥ\tCtrl+L"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:254
+#: lib/Slic3r/GUI/MainFrame.pm:248
 msgid "Load exported configuration file"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:257
+#: lib/Slic3r/GUI/MainFrame.pm:251
 msgid "&Export Configâ€Ĥ\tCtrl+E"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:257
+#: lib/Slic3r/GUI/MainFrame.pm:251
 msgid "Export current configuration to file"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:260
+#: lib/Slic3r/GUI/MainFrame.pm:254
 msgid "&Load Config Bundleâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:260
+#: lib/Slic3r/GUI/MainFrame.pm:254
 msgid "Load presets from a bundle"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:263
+#: lib/Slic3r/GUI/MainFrame.pm:257
 msgid "&Export Config Bundleâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:263
+#: lib/Slic3r/GUI/MainFrame.pm:257
 msgid "Export all presets to file"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:268
+#: lib/Slic3r/GUI/MainFrame.pm:262
 msgid "Q&uick Sliceâ€Ĥ\tCtrl+U"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:268
+#: lib/Slic3r/GUI/MainFrame.pm:262
 msgid "Slice a file into a G-code"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:274
+#: lib/Slic3r/GUI/MainFrame.pm:268
 msgid "Quick Slice and Save &Asâ€Ĥ\tCtrl+Alt+U"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:274
+#: lib/Slic3r/GUI/MainFrame.pm:268
 msgid "Slice a file into a G-code, save as"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:280
+#: lib/Slic3r/GUI/MainFrame.pm:274
 msgid "&Repeat Last Quick Slice\tCtrl+Shift+U"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:280
+#: lib/Slic3r/GUI/MainFrame.pm:274
 msgid "Repeat last quick slice"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:287
+#: lib/Slic3r/GUI/MainFrame.pm:281
 msgid "Slice to SV&Gâ€Ĥ\tCtrl+G"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:287
+#: lib/Slic3r/GUI/MainFrame.pm:281
 msgid "Slice file to a multi-layer SVG"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:291
+#: lib/Slic3r/GUI/MainFrame.pm:285
 msgid "(&Re)Slice Now\tCtrl+S"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:291
+#: lib/Slic3r/GUI/MainFrame.pm:285
 msgid "Start new slicing process"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:294
+#: lib/Slic3r/GUI/MainFrame.pm:288
 msgid "Repair STL fileâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:294
+#: lib/Slic3r/GUI/MainFrame.pm:288
 msgid "Automatically repair an STL file"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:299
+#: lib/Slic3r/GUI/MainFrame.pm:293
 msgid "Preferencesâ€Ĥ\tCtrl+,"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:299
+#: lib/Slic3r/GUI/MainFrame.pm:293
 msgid "Application preferences"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:304
+#: lib/Slic3r/GUI/MainFrame.pm:298
 msgid "&Quit"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:304
+#: lib/Slic3r/GUI/MainFrame.pm:298
 msgid "Quit Slic3r"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:314
+#: lib/Slic3r/GUI/MainFrame.pm:308
 msgid "Export G-code..."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:314
+#: lib/Slic3r/GUI/MainFrame.pm:308
 msgid "Export current plate as G-code"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:317
+#: lib/Slic3r/GUI/MainFrame.pm:311
 msgid "Export plate as STL..."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:317
+#: lib/Slic3r/GUI/MainFrame.pm:311
 msgid "Export current plate as STL"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:320
+#: lib/Slic3r/GUI/MainFrame.pm:314
 msgid "Export plate as AMF..."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:320
+#: lib/Slic3r/GUI/MainFrame.pm:314
 msgid "Export current plate as AMF"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:323
+#: lib/Slic3r/GUI/MainFrame.pm:317
 msgid "Export plate as 3MF..."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:323
+#: lib/Slic3r/GUI/MainFrame.pm:317
 msgid "Export current plate as 3MF"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:336
+#: lib/Slic3r/GUI/MainFrame.pm:330
 msgid "Select &Plater Tab\tCtrl+1"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:336
+#: lib/Slic3r/GUI/MainFrame.pm:330
 msgid "Show the plater"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:342
+#: lib/Slic3r/GUI/MainFrame.pm:336
 msgid "Select &Controller Tab\tCtrl+T"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:342
+#: lib/Slic3r/GUI/MainFrame.pm:336
 msgid "Show the printer controller"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:350
+#: lib/Slic3r/GUI/MainFrame.pm:344
 msgid "Select P&rint Settings Tab\tCtrl+2"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:350
+#: lib/Slic3r/GUI/MainFrame.pm:344
 msgid "Show the print settings"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:353
+#: lib/Slic3r/GUI/MainFrame.pm:347
 msgid "Select &Filament Settings Tab\tCtrl+3"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:353
+#: lib/Slic3r/GUI/MainFrame.pm:347
 msgid "Show the filament settings"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:356
+#: lib/Slic3r/GUI/MainFrame.pm:350
 msgid "Select Print&er Settings Tab\tCtrl+4"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:356
+#: lib/Slic3r/GUI/MainFrame.pm:350
 msgid "Show the printer settings"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:368
+#: lib/Slic3r/GUI/MainFrame.pm:362
 msgid "Iso"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:368
+#: lib/Slic3r/GUI/MainFrame.pm:362
 msgid "Iso View"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:369
+#: lib/Slic3r/GUI/MainFrame.pm:363
 msgid "Top View"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:370
+#: lib/Slic3r/GUI/MainFrame.pm:364
 msgid "Bottom View"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:371
+#: lib/Slic3r/GUI/MainFrame.pm:365
 msgid "Front"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:371
+#: lib/Slic3r/GUI/MainFrame.pm:365
 msgid "Front View"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:372
+#: lib/Slic3r/GUI/MainFrame.pm:366
 msgid "Rear"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:372
+#: lib/Slic3r/GUI/MainFrame.pm:366
 msgid "Rear View"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:373
+#: lib/Slic3r/GUI/MainFrame.pm:367
 msgid "Left"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:373
+#: lib/Slic3r/GUI/MainFrame.pm:367
 msgid "Left View"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:374
+#: lib/Slic3r/GUI/MainFrame.pm:368
 msgid "Right"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:374
+#: lib/Slic3r/GUI/MainFrame.pm:368
 msgid "Right View"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:380
+#: lib/Slic3r/GUI/MainFrame.pm:374
 msgid "&Configuration "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:380
+#: lib/Slic3r/GUI/MainFrame.pm:374
 msgid "Run Configuration "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:385
+#: lib/Slic3r/GUI/MainFrame.pm:379
 msgid "Prusa 3D Drivers"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:385
+#: lib/Slic3r/GUI/MainFrame.pm:379
 msgid "Open the Prusa3D drivers download page in your browser"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:388
+#: lib/Slic3r/GUI/MainFrame.pm:382
 msgid "Prusa Edition Releases"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:388
+#: lib/Slic3r/GUI/MainFrame.pm:382
 msgid "Open the Prusa Edition releases page in your browser"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:395
+#: lib/Slic3r/GUI/MainFrame.pm:389
 msgid "Slic3r &Website"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:395
+#: lib/Slic3r/GUI/MainFrame.pm:389
 msgid "Open the Slic3r website in your browser"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:398
+#: lib/Slic3r/GUI/MainFrame.pm:392
 msgid "Slic3r &Manual"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:398
+#: lib/Slic3r/GUI/MainFrame.pm:392
 msgid "Open the Slic3r manual in your browser"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:402
+#: lib/Slic3r/GUI/MainFrame.pm:396
 msgid "System Info"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:402
+#: lib/Slic3r/GUI/MainFrame.pm:396
 msgid "Show system information"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:405
+#: lib/Slic3r/GUI/MainFrame.pm:399
 msgid "Report an Issue"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:405
+#: lib/Slic3r/GUI/MainFrame.pm:399
 msgid "Report an issue on the Slic3r Prusa Edition"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:408
+#: lib/Slic3r/GUI/MainFrame.pm:402
 msgid "&About Slic3r"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:408
+#: lib/Slic3r/GUI/MainFrame.pm:402
 msgid "Show about dialog"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:418
+#: lib/Slic3r/GUI/MainFrame.pm:412
 msgid "&File"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:419
+#: lib/Slic3r/GUI/MainFrame.pm:413
 msgid "&Plater"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:420
+#: lib/Slic3r/GUI/MainFrame.pm:414
 msgid "&Object"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:421
+#: lib/Slic3r/GUI/MainFrame.pm:415
 msgid "&Window"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:422
+#: lib/Slic3r/GUI/MainFrame.pm:416
 msgid "&View"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:426
+#: lib/Slic3r/GUI/MainFrame.pm:420
 msgid "&Help"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:457
+#: lib/Slic3r/GUI/MainFrame.pm:452
 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:469
+#: lib/Slic3r/GUI/MainFrame.pm:464
 msgid "No previously sliced file."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:474
+#: lib/Slic3r/GUI/MainFrame.pm:469
 msgid "Previously sliced file ("
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:474
+#: lib/Slic3r/GUI/MainFrame.pm:469
 msgid ") not found."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:475
+#: lib/Slic3r/GUI/MainFrame.pm:470
 msgid "File Not Found"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:514
+#: lib/Slic3r/GUI/MainFrame.pm:509
 msgid "SVG"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:514
+#: lib/Slic3r/GUI/MainFrame.pm:509
 msgid "G-code"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:514
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1645
+#: lib/Slic3r/GUI/MainFrame.pm:509 lib/Slic3r/GUI/Plater.pm:1615
 msgid " file as:"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:528
+#: lib/Slic3r/GUI/MainFrame.pm:523
 msgid "Slicingâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:528
+#: lib/Slic3r/GUI/MainFrame.pm:523
 msgid "Processing "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:548
+#: lib/Slic3r/GUI/MainFrame.pm:543
 msgid " was successfully sliced."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:550
+#: lib/Slic3r/GUI/MainFrame.pm:545
 msgid "Slicing Done!"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:566
+#: lib/Slic3r/GUI/MainFrame.pm:561
 msgid "Select the STL file to repair:"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:580
+#: lib/Slic3r/GUI/MainFrame.pm:575
 msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:594
+#: lib/Slic3r/GUI/MainFrame.pm:589
 msgid "Your file was repaired."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:594
+#: lib/Slic3r/GUI/MainFrame.pm:589
 msgid "Repair"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:605
+#: lib/Slic3r/GUI/MainFrame.pm:600
 msgid "Save configuration as:"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:623
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:667
+#: lib/Slic3r/GUI/MainFrame.pm:618 lib/Slic3r/GUI/MainFrame.pm:662
 msgid "Select configuration to load:"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:646
+#: lib/Slic3r/GUI/MainFrame.pm:641
 msgid "Save presets bundle as:"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:687
+#: lib/Slic3r/GUI/MainFrame.pm:682
 #, possible-perl-format
 msgid "%d presets successfully imported."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:749
+#: lib/Slic3r/GUI/MainFrame.pm:744
 msgid "You have unsaved changes "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:749
+#: lib/Slic3r/GUI/MainFrame.pm:744
 msgid ". Discard changes and continue anyway?"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\MainFrame.pm:750
+#: lib/Slic3r/GUI/MainFrame.pm:745
 msgid "Unsaved Presets"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:104
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2124
+#: lib/Slic3r/GUI/Plater.pm:104 lib/Slic3r/GUI/Plater.pm:2094
 msgid "3D"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:138
+#: lib/Slic3r/GUI/Plater.pm:138
 msgid "2D"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:157
+#: lib/Slic3r/GUI/Plater.pm:157
 msgid "Layers"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:177
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:195
+#: lib/Slic3r/GUI/Plater.pm:177 lib/Slic3r/GUI/Plater.pm:195
 msgid "Addâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:179
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:197
+#: lib/Slic3r/GUI/Plater.pm:179 lib/Slic3r/GUI/Plater.pm:197
 msgid "Delete All"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:180
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:198
+#: lib/Slic3r/GUI/Plater.pm:180 lib/Slic3r/GUI/Plater.pm:198
 msgid "Arrange"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:182
+#: lib/Slic3r/GUI/Plater.pm:182
 msgid "More"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:183
+#: lib/Slic3r/GUI/Plater.pm:183
 msgid "Fewer"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:185
+#: lib/Slic3r/GUI/Plater.pm:185
 msgid "45° ccw"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:186
+#: lib/Slic3r/GUI/Plater.pm:186
 msgid "45° cw"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:187
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:203
+#: lib/Slic3r/GUI/Plater.pm:187 lib/Slic3r/GUI/Plater.pm:203
 msgid "Scaleâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:188
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:204
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2099
+#: lib/Slic3r/GUI/Plater.pm:188 lib/Slic3r/GUI/Plater.pm:204
+#: lib/Slic3r/GUI/Plater.pm:2069
 msgid "Split"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:189
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:205
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2102
+#: lib/Slic3r/GUI/Plater.pm:189 lib/Slic3r/GUI/Plater.pm:205
+#: lib/Slic3r/GUI/Plater.pm:2072
 msgid "Cutâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:191
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:206
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2106
+#: lib/Slic3r/GUI/Plater.pm:191 lib/Slic3r/GUI/Plater.pm:206
+#: lib/Slic3r/GUI/Plater.pm:2076
 msgid "Settingsâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:192
+#: lib/Slic3r/GUI/Plater.pm:192
 msgid "Layer Editing"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:207
+#: lib/Slic3r/GUI/Plater.pm:207
 msgid "Layer editing"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:220
+#: lib/Slic3r/GUI/Plater.pm:220
 msgid "Name"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:221
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:900
+#: lib/Slic3r/GUI/Plater.pm:221 lib/Slic3r/GUI/Plater.pm:904
 msgid "Copies"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:222
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1056
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1061
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2068
+#: lib/Slic3r/GUI/Plater.pm:222 lib/Slic3r/GUI/Plater.pm:1060
+#: lib/Slic3r/GUI/Plater.pm:1065 lib/Slic3r/GUI/Plater.pm:2038
 msgid "Scale"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:236
+#: lib/Slic3r/GUI/Plater.pm:236
 msgid "Export G-codeâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:237
+#: lib/Slic3r/GUI/Plater.pm:237
 msgid "Slice now"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:238
+#: lib/Slic3r/GUI/Plater.pm:238
 msgid "Printâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:239
+#: lib/Slic3r/GUI/Plater.pm:239
 msgid "Send to printer"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:240
+#: lib/Slic3r/GUI/Plater.pm:240
 msgid "Export STLâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:367
+#: lib/Slic3r/GUI/Plater.pm:367
 msgid "Print settings"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:369
+#: lib/Slic3r/GUI/Plater.pm:369
 msgid "Printer"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:398
+#: lib/Slic3r/GUI/Plater.pm:401
 msgid "Info"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:409
+#: lib/Slic3r/GUI/Plater.pm:412
 msgid "Volume"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:410
+#: lib/Slic3r/GUI/Plater.pm:413
 msgid "Facets"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:411
+#: lib/Slic3r/GUI/Plater.pm:414
 msgid "Materials"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:412
+#: lib/Slic3r/GUI/Plater.pm:415
 msgid "Manifold"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:438
+#: lib/Slic3r/GUI/Plater.pm:441
 msgid "Sliced Info"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:447
+#: lib/Slic3r/GUI/Plater.pm:450
 msgid "Used Filament (m)"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:448
+#: lib/Slic3r/GUI/Plater.pm:451
 msgid "Used Filament (mm³)"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:449
+#: lib/Slic3r/GUI/Plater.pm:452
 msgid "Used Filament (g)"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:451
+#: lib/Slic3r/GUI/Plater.pm:454
 msgid "Estimated printing time"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:629
+#: lib/Slic3r/GUI/Plater.pm:633
 msgid "Loadingâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:629
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:643
+#: lib/Slic3r/GUI/Plater.pm:633 lib/Slic3r/GUI/Plater.pm:647
 msgid "Processing input file\n"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:663
+#: lib/Slic3r/GUI/Plater.pm:667
 msgid ""
 "This file contains several objects positioned at multiple heights. Instead "
 "of considering them as multiple objects, should I consider\n"
 "this file as a single object having multiple parts?\n"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:666
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:683
+#: lib/Slic3r/GUI/Plater.pm:670 lib/Slic3r/GUI/Plater.pm:687
 msgid "Multi-part object detected"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:680
+#: lib/Slic3r/GUI/Plater.pm:684
 msgid ""
 "Multiple objects were loaded for a multi-material printer.\n"
 "Instead of considering them as multiple objects, should I consider\n"
 "these files to represent a single object having multiple parts?\n"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:692
+#: lib/Slic3r/GUI/Plater.pm:696
 msgid "Loaded "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:744
+#: lib/Slic3r/GUI/Plater.pm:748
 msgid ""
 "Your object appears to be too large, so it was automatically scaled down to "
 "fit your print bed."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:745
+#: lib/Slic3r/GUI/Plater.pm:749
 msgid "Object too large?"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:900
+#: lib/Slic3r/GUI/Plater.pm:904
 msgid "Enter the number of copies of the selected object:"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:927
+#: lib/Slic3r/GUI/Plater.pm:931
 msgid ""
 "\n"
 "Non-positive value."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:928
+#: lib/Slic3r/GUI/Plater.pm:932
 msgid ""
 "\n"
 "Not a numeric value."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:929
+#: lib/Slic3r/GUI/Plater.pm:933
 msgid "Slic3r Error"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:950
-msgid "Enter the rotation angle:"
-msgstr ""
-
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:950
-msgid "Rotate around "
-msgstr ""
-
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:950
-msgid "Invalid rotation angle entered"
-msgstr ""
-
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1030
+#: lib/Slic3r/GUI/Plater.pm:1034
 #, possible-perl-format
 msgid "Enter the new size for the selected object (print bed: %smm):"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1031
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1035
+#: lib/Slic3r/GUI/Plater.pm:1035 lib/Slic3r/GUI/Plater.pm:1039
 msgid "Scale along "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1031
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1035
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1056
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1061
+#: lib/Slic3r/GUI/Plater.pm:1035 lib/Slic3r/GUI/Plater.pm:1039
+#: lib/Slic3r/GUI/Plater.pm:1060 lib/Slic3r/GUI/Plater.pm:1065
 msgid "Invalid scaling value entered"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1035
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1061
-#, no-perl-format
+#: lib/Slic3r/GUI/Plater.pm:1039 lib/Slic3r/GUI/Plater.pm:1065
+#, possible-perl-format
 msgid "Enter the scale % for the selected object:"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1056
+#: lib/Slic3r/GUI/Plater.pm:1060
 msgid "Enter the new max size for the selected object:"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1112
+#: lib/Slic3r/GUI/Plater.pm:1116
 msgid ""
 "The selected object can't be split because it contains more than one volume/"
 "material."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1121
+#: lib/Slic3r/GUI/Plater.pm:1125
 msgid ""
 "The selected object couldn't be split because it contains only one part."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1286
+#: lib/Slic3r/GUI/Plater.pm:1290
 msgid "Slicing cancelled"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1300
+#: lib/Slic3r/GUI/Plater.pm:1304
 msgid "Another export job is currently running."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1445
+#: lib/Slic3r/GUI/Plater.pm:1335
+msgid "Save G-code file as:"
+msgstr ""
+
+#: lib/Slic3r/GUI/Plater.pm:1352
+msgid "Export cancelled"
+msgstr ""
+
+#: lib/Slic3r/GUI/Plater.pm:1449
 msgid "File added to print queue"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1448
+#: lib/Slic3r/GUI/Plater.pm:1452
 msgid "Sending G-code file to the OctoPrint server..."
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1451
+#: lib/Slic3r/GUI/Plater.pm:1455
 msgid "G-code file exported to "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1454
+#: lib/Slic3r/GUI/Plater.pm:1458
 msgid "Export failed"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1524
-msgid "G-code file successfully uploaded to the OctoPrint server"
-msgstr ""
-
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1526
-msgid "Error while uploading to the OctoPrint server: "
-msgstr ""
-
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1539
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1581
+#: lib/Slic3r/GUI/Plater.pm:1509 lib/Slic3r/GUI/Plater.pm:1551
 msgid "STL file exported to "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1592
+#: lib/Slic3r/GUI/Plater.pm:1562
 msgid "AMF file exported to "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1596
+#: lib/Slic3r/GUI/Plater.pm:1566
 msgid "Error exporting AMF file "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1608
+#: lib/Slic3r/GUI/Plater.pm:1578
 msgid "3MF file exported to "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1612
+#: lib/Slic3r/GUI/Plater.pm:1582
 msgid "Error exporting 3MF file "
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1958
+#: lib/Slic3r/GUI/Plater.pm:1818
+msgid ""
+"Please install the OpenGL modules to use this feature (see build "
+"instructions)."
+msgstr ""
+
+#: lib/Slic3r/GUI/Plater.pm:1928
 #, possible-perl-format
 msgid "%d (%d shells)"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1960
+#: lib/Slic3r/GUI/Plater.pm:1930
 #, possible-perl-format
 msgid "Auto-repaired (%d errors)"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1965
+#: lib/Slic3r/GUI/Plater.pm:1935
 #, possible-perl-format
 msgid ""
 "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
 "facets reversed, %d backwards edges"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:1970
+#: lib/Slic3r/GUI/Plater.pm:1940
 msgid "Yes"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2021
+#: lib/Slic3r/GUI/Plater.pm:1991
 msgid "Remove the selected object"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2024
+#: lib/Slic3r/GUI/Plater.pm:1994
 msgid "Increase copies"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2024
+#: lib/Slic3r/GUI/Plater.pm:1994
 msgid "Place one more copy of the selected object"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2027
+#: lib/Slic3r/GUI/Plater.pm:1997
 msgid "Decrease copies"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2027
+#: lib/Slic3r/GUI/Plater.pm:1997
 msgid "Remove one copy of the selected object"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2030
+#: lib/Slic3r/GUI/Plater.pm:2000
 msgid "Set number of copiesâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2030
+#: lib/Slic3r/GUI/Plater.pm:2000
 msgid "Change the number of copies of the selected object"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2034
+#: lib/Slic3r/GUI/Plater.pm:2004
 msgid "Rotate 45° clockwise"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2034
+#: lib/Slic3r/GUI/Plater.pm:2004
 msgid "Rotate the selected object by 45° clockwise"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2037
+#: lib/Slic3r/GUI/Plater.pm:2007
 msgid "Rotate 45° counter-clockwise"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2037
+#: lib/Slic3r/GUI/Plater.pm:2007
 msgid "Rotate the selected object by 45° counter-clockwise"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2042
+#: lib/Slic3r/GUI/Plater.pm:2012
 msgid "Rotate"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2042
+#: lib/Slic3r/GUI/Plater.pm:2012
 msgid "Rotate the selected object by an arbitrary angle"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2044
+#: lib/Slic3r/GUI/Plater.pm:2014
 msgid "Around X axisâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2044
+#: lib/Slic3r/GUI/Plater.pm:2014
 msgid "Rotate the selected object by an arbitrary angle around X axis"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2047
+#: lib/Slic3r/GUI/Plater.pm:2017
 msgid "Around Y axisâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2047
+#: lib/Slic3r/GUI/Plater.pm:2017
 msgid "Rotate the selected object by an arbitrary angle around Y axis"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2050
+#: lib/Slic3r/GUI/Plater.pm:2020
 msgid "Around Z axisâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2050
+#: lib/Slic3r/GUI/Plater.pm:2020
 msgid "Rotate the selected object by an arbitrary angle around Z axis"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2055
+#: lib/Slic3r/GUI/Plater.pm:2025
 msgid "Mirror"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2055
+#: lib/Slic3r/GUI/Plater.pm:2025
 msgid "Mirror the selected object"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2057
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2073
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2089
+#: lib/Slic3r/GUI/Plater.pm:2027 lib/Slic3r/GUI/Plater.pm:2043
+#: lib/Slic3r/GUI/Plater.pm:2059
 msgid "Along X axisâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2057
+#: lib/Slic3r/GUI/Plater.pm:2027
 msgid "Mirror the selected object along the X axis"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2060
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2076
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2092
+#: lib/Slic3r/GUI/Plater.pm:2030 lib/Slic3r/GUI/Plater.pm:2046
+#: lib/Slic3r/GUI/Plater.pm:2062
 msgid "Along Y axisâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2060
+#: lib/Slic3r/GUI/Plater.pm:2030
 msgid "Mirror the selected object along the Y axis"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2063
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2079
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2095
+#: lib/Slic3r/GUI/Plater.pm:2033 lib/Slic3r/GUI/Plater.pm:2049
+#: lib/Slic3r/GUI/Plater.pm:2065
 msgid "Along Z axisâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2063
+#: lib/Slic3r/GUI/Plater.pm:2033
 msgid "Mirror the selected object along the Z axis"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2068
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2084
+#: lib/Slic3r/GUI/Plater.pm:2038 lib/Slic3r/GUI/Plater.pm:2054
 msgid "Scale the selected object along a single axis"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2070
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2086
+#: lib/Slic3r/GUI/Plater.pm:2040 lib/Slic3r/GUI/Plater.pm:2056
 msgid "Uniformlyâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2070
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2086
+#: lib/Slic3r/GUI/Plater.pm:2040 lib/Slic3r/GUI/Plater.pm:2056
 msgid "Scale the selected object along the XYZ axes"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2073
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2089
+#: lib/Slic3r/GUI/Plater.pm:2043 lib/Slic3r/GUI/Plater.pm:2059
 msgid "Scale the selected object along the X axis"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2076
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2092
+#: lib/Slic3r/GUI/Plater.pm:2046 lib/Slic3r/GUI/Plater.pm:2062
 msgid "Scale the selected object along the Y axis"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2079
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2095
+#: lib/Slic3r/GUI/Plater.pm:2049 lib/Slic3r/GUI/Plater.pm:2065
 msgid "Scale the selected object along the Z axis"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2084
+#: lib/Slic3r/GUI/Plater.pm:2054
 msgid "Scale to size"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2099
+#: lib/Slic3r/GUI/Plater.pm:2069
 msgid "Split the selected object into individual parts"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2102
+#: lib/Slic3r/GUI/Plater.pm:2072
 msgid "Open the 3D cutting tool"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2106
+#: lib/Slic3r/GUI/Plater.pm:2076
 msgid "Open the object editor dialog"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2110
+#: lib/Slic3r/GUI/Plater.pm:2080
 msgid "Reload from Disk"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2110
+#: lib/Slic3r/GUI/Plater.pm:2080
 msgid "Reload the selected file from Disk"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2113
+#: lib/Slic3r/GUI/Plater.pm:2083
 msgid "Export object as STLâ€Ĥ"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater.pm:2113
+#: lib/Slic3r/GUI/Plater.pm:2083
 msgid "Export this single object as STL file"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\2D.pm:131
+#: lib/Slic3r/GUI/Plater/2D.pm:131
 msgid "What do you want to print today? ™"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\2D.pm:132
+#: lib/Slic3r/GUI/Plater/2D.pm:132
 msgid "Drag your objects here"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:63
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:63
 msgid "1 Layer"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:65
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:65
 msgid "View"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:75
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:75
 msgid "Show"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:78
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:79
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:78 lib/Slic3r/GUI/Plater/3DPreview.pm:79
 msgid "Feature types"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:96
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:96
 msgid "Retractions"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:97
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:97
 msgid "Unretractions"
 msgstr ""
 
-#: c:\src\Slic3r\lib\Slic3r\GUI\Plater\3DPreview.pm:98
+#: lib/Slic3r/GUI/Plater/3DPreview.pm:98
 msgid "Shells"
 msgstr ""
diff --git a/resources/localization/list.txt b/resources/localization/list.txt
index 5a6965d6a..292549545 100644
--- a/resources/localization/list.txt
+++ b/resources/localization/list.txt
@@ -9,6 +9,8 @@ xs/src/slic3r/GUI/2DBed.cpp
 xs/src/slic3r/GUI/PresetHints.cpp
 xs/src/slic3r/GUI/Preferences.hpp
 xs/src/slic3r/GUI/Preferences.cpp
+xs/src/slic3r/GUI/BonjourDialog.cpp
+xs/src/slic3r/Utils/OctoPrint.cpp
 xs/src/libslic3r/PrintConfig.cpp
 xs/src/libslic3r/GCode/PreviewData.cpp
 lib/Slic3r/GUI.pm
diff --git a/resources/localization/uk/Slic3rPE_.mo b/resources/localization/uk/Slic3rPE_.mo
new file mode 100644
index 000000000..c980ae64d
Binary files /dev/null and b/resources/localization/uk/Slic3rPE_.mo differ
diff --git a/resources/profiles/Original Prusa i3 MK2 and MK2S.ini b/resources/profiles/Original Prusa i3 MK2 and MK2S.ini
deleted file mode 100644
index a186c3775..000000000
--- a/resources/profiles/Original Prusa i3 MK2 and MK2S.ini	
+++ /dev/null
@@ -1,3376 +0,0 @@
-# generated by Slic3r Prusa Edition 1.39.0 on 2018-01-06 at 15:10:57
-
-[print:0.05mm DETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 25%
-fill_pattern = cubic
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.5
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 30
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 30
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.3
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 30
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 180
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.05mm DETAIL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.28
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.3
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 20
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 20
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.18
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 20
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 200
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.05mm DETAIL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 25%
-fill_pattern = grid
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 30
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 30
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.3
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 30
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 180
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 40
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 600
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.25
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.25
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.25
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1600
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.25
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 600
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.25
-perimeter_speed = 25
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.25
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.18
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.25
-top_solid_infill_speed = 30
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm 100mms Linear Advance]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 100
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 30
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 70
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 40
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 600
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.25
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.25
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.25
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1600
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.25
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 600
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.25
-perimeter_speed = 25
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.25
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.2
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 35
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.25
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 40
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL SOLUBLE FULL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 25
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 1
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 25
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm 100mms Linear Advance]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 100
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 30
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 70
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm FAST MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 40
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL SOLUBLE FULL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 1
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 30
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL SOLUBLE INTERFACE]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 30
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.7
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.43
-perimeter_speed = 50
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.7
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.43
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 50
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST sol full 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.55
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.57
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST sol int 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.55
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.57
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[filament:ColorFabb Brass Bronze]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.3
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 210
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 210
-
-[filament:ColorFabb HT]
-bed_temperature = 105
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 105
-first_layer_temperature = 270
-max_fan_speed = 20
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 270
-
-[filament:ColorFabb PLA-PHA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:ColorFabb Woodfil]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 200
-
-[filament:ColorFabb XT]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 270
-
-[filament:ColorFabb XT-CF20]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 1
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 260
-
-[filament:ColorFabb nGen]
-bed_temperature = 85
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = NGEN
-first_layer_bed_temperature = 85
-first_layer_temperature = 240
-max_fan_speed = 35
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:ColorFabb nGen flex]
-bed_temperature = 85
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 5
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = FLEX
-first_layer_bed_temperature = 85
-first_layer_temperature = 260
-max_fan_speed = 35
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 260
-
-[filament:E3D Edge]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:E3D PC-ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 270
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 270
-
-[filament:Fillamentum ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 240
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 240
-
-[filament:Fillamentum ASA]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 265
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 265
-
-[filament:Fillamentum CPE HG100 HM100]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "CPE HG100 , CPE HM100"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 80
-min_fan_speed = 80
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 260
-
-[filament:Fillamentum Timberfil]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 190
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 190
-
-[filament:Generic ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 255
-
-[filament:Generic PET]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:Generic PLA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:Polymaker PC-Max]
-bed_temperature = 120
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 120
-first_layer_temperature = 270
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 270
-
-[filament:Primavalue PVA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 1
-filament_type = PVA
-first_layer_bed_temperature = 60
-first_layer_temperature = 195
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 195
-
-[filament:Prusa ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 255
-
-[filament:Prusa HIPS]
-bed_temperature = 100
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 0.9
-fan_always_on = 1
-fan_below_layer_time = 10
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 1
-filament_type = HIPS
-first_layer_bed_temperature = 100
-first_layer_temperature = 220
-max_fan_speed = 20
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 220
-
-[filament:Prusa PET]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:Prusa PLA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:SemiFlex or Flexfill 98A]
-bed_temperature = 50
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #00CA0A
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 2.5
-filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = FLEX
-first_layer_bed_temperature = 50
-first_layer_temperature = 220
-max_fan_speed = 90
-min_fan_speed = 70
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 230
-
-[filament:Taulman Bridge]
-bed_temperature = 50
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 5
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 250
-
-[filament:Taulman T-Glase]
-bed_temperature = 90
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 5
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 240
-
-[filament:Verbatim BVOH]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 1
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 210
-
-[filament:Verbatim PP]
-bed_temperature = 100
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 2
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 5
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 220
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 220
-
-[printer:Original Prusa i3 MK2]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 0
-end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
-extruder_colour = #FFFF00
-extruder_offset = 0x0
-gcode_flavor = marlin
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
-printer_settings_id = 
-retract_before_travel = 1
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 0.8
-retract_length_toolchange = 3
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 0
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 0.25 nozzle]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 0
-end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
-extruder_colour = #FFFF00
-extruder_offset = 0x0
-gcode_flavor = marlin
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.1
-min_layer_height = 0.05
-nozzle_diameter = 0.25
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
-printer_settings_id = 
-retract_before_travel = 1
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 1
-retract_length_toolchange = 3
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 50
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 0
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 0
-wipe = 1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 0.6 nozzle]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 0
-end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
-extruder_colour = #FFFF00
-extruder_offset = 0x0
-gcode_flavor = marlin
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.35
-min_layer_height = 0.1
-nozzle_diameter = 0.6
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
-printer_settings_id = 
-retract_before_travel = 1
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 0.8
-retract_length_toolchange = 3
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 0
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[presets]
-print = 0.15mm OPTIMAL
-printer = Original Prusa i3 MK2
-filament = Prusa PLA
diff --git a/resources/profiles/Original Prusa i3 MK2MM.ini b/resources/profiles/Original Prusa i3 MK2MM.ini
deleted file mode 100644
index 035d15515..000000000
--- a/resources/profiles/Original Prusa i3 MK2MM.ini	
+++ /dev/null
@@ -1,3419 +0,0 @@
-# generated by Slic3r Prusa Edition 1.39.0 on 2018-01-06 at 15:12:06
-
-[print:0.05mm DETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 25%
-fill_pattern = cubic
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.5
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 30
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 30
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.3
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 30
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 180
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.05mm DETAIL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.28
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.3
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 20
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 20
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.18
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 20
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 200
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.05mm DETAIL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 25%
-fill_pattern = grid
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 30
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 30
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.3
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 30
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 180
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 40
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 600
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.25
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.25
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.25
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1600
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.25
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 600
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.25
-perimeter_speed = 25
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.25
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.18
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.25
-top_solid_infill_speed = 30
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm 100mms Linear Advance]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 100
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 30
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 70
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 40
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 600
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.25
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.25
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.25
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1600
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.25
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 600
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.25
-perimeter_speed = 25
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.25
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.2
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 35
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.25
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 40
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL SOLUBLE FULL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 25
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 1
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 25
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm 100mms Linear Advance]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 100
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 30
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 70
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm FAST MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 3500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 200
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 250
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 200
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 250
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 40
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL SOLUBLE FULL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 1
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 30
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL SOLUBLE INTERFACE]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 30
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.7
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.43
-perimeter_speed = 50
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.7
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.43
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 50
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST sol full 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.55
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.57
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST sol int 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.55
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.57
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[filament:ColorFabb Brass Bronze]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.3
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 210
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 210
-
-[filament:ColorFabb HT]
-bed_temperature = 105
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 105
-first_layer_temperature = 270
-max_fan_speed = 20
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 270
-
-[filament:ColorFabb PLA-PHA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:ColorFabb Woodfil]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 200
-
-[filament:ColorFabb XT]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 270
-
-[filament:ColorFabb XT-CF20]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 1
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 260
-
-[filament:ColorFabb nGen]
-bed_temperature = 85
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = NGEN
-first_layer_bed_temperature = 85
-first_layer_temperature = 240
-max_fan_speed = 35
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:ColorFabb nGen flex]
-bed_temperature = 85
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 5
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = FLEX
-first_layer_bed_temperature = 85
-first_layer_temperature = 260
-max_fan_speed = 35
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 260
-
-[filament:E3D Edge]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:E3D PC-ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 270
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 270
-
-[filament:Fillamentum ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 240
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 240
-
-[filament:Fillamentum ASA]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 265
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 265
-
-[filament:Fillamentum CPE HG100 HM100]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "CPE HG100 , CPE HM100"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 80
-min_fan_speed = 80
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 260
-
-[filament:Fillamentum Timberfil]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 190
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 190
-
-[filament:Generic ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 255
-
-[filament:Generic PET]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:Generic PLA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:Polymaker PC-Max]
-bed_temperature = 120
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 120
-first_layer_temperature = 270
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 270
-
-[filament:Primavalue PVA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 1
-filament_type = PVA
-first_layer_bed_temperature = 60
-first_layer_temperature = 195
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 195
-
-[filament:Prusa ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 255
-
-[filament:Prusa HIPS]
-bed_temperature = 100
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 0.9
-fan_always_on = 1
-fan_below_layer_time = 10
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 1
-filament_type = HIPS
-first_layer_bed_temperature = 100
-first_layer_temperature = 220
-max_fan_speed = 20
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 220
-
-[filament:Prusa PET]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:Prusa PLA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:SemiFlex or Flexfill 98A]
-bed_temperature = 50
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #00CA0A
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 2.5
-filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = FLEX
-first_layer_bed_temperature = 50
-first_layer_temperature = 220
-max_fan_speed = 90
-min_fan_speed = 70
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 230
-
-[filament:Taulman Bridge]
-bed_temperature = 50
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 5
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 250
-
-[filament:Taulman T-Glase]
-bed_temperature = 90
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 5
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 240
-
-[filament:Verbatim BVOH]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 1
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 210
-
-[filament:Verbatim PP]
-bed_temperature = 100
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 2
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 5
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 220
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 220
-
-[printer:Original Prusa i3 MK2 MM Single Mode]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 50
-end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
-extruder_colour = #FFAA55
-extruder_offset = 0x0
-gcode_flavor = marlin
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-printer_settings_id = 
-retract_before_travel = 3
-retract_before_wipe = 60%
-retract_layer_change = 0
-retract_length = 4
-retract_length_toolchange = 6
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 80
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 1
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 MM Single Mode 0.6 nozzle]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 50
-end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
-extruder_colour = #FFAA55
-extruder_offset = 0x0
-gcode_flavor = marlin
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25
-min_layer_height = 0.07
-nozzle_diameter = 0.6
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-printer_settings_id = 
-retract_before_travel = 3
-retract_before_wipe = 60%
-retract_layer_change = 0
-retract_length = 4
-retract_length_toolchange = 6
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 199
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 80
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 1
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 MultiMaterial]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 50,50,50,50
-end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
-extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
-extruder_offset = 0x0,0x0,0x0,0x0
-gcode_flavor = marlin
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25,0.25,0.25,0.25
-min_layer_height = 0.07,0.07,0.07,0.07
-nozzle_diameter = 0.4,0.4,0.4,0.4
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-printer_settings_id = 
-retract_before_travel = 3,3,3,3
-retract_before_wipe = 60%,60%,60%,60%
-retract_layer_change = 0,0,0,0
-retract_length = 4,4,4,4
-retract_length_toolchange = 4,4,4,4
-retract_lift = 0.6,0.6,0.6,0.6
-retract_lift_above = 0,0,0,0
-retract_lift_below = 199,199,199,199
-retract_restart_extra = 0,0,0,0
-retract_restart_extra_toolchange = 0,0,0,0
-retract_speed = 80,80,80,80
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 1
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 0
-wipe = 1,1,1,1
-z_offset = 0
-
-[printer:Original Prusa i3 MK2 MultiMaterial 0.6 nozzle]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 50,50,50,50
-end_gcode = {if not has_wipe_tower}\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n
-extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
-extruder_offset = 0x0,0x0,0x0,0x0
-gcode_flavor = marlin
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25,0.25,0.25,0.25
-min_layer_height = 0.07,0.07,0.07,0.07
-nozzle_diameter = 0.6,0.6,0.6,0.6
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
-printer_settings_id = 
-retract_before_travel = 3,3,3,3
-retract_before_wipe = 60%,60%,60%,60%
-retract_layer_change = 0,0,0,0
-retract_length = 4,4,4,4
-retract_length_toolchange = 4,4,4,4
-retract_lift = 0.6,0.6,0.6,0.6
-retract_lift_above = 0,0,0,0
-retract_lift_below = 199,199,199,199
-retract_restart_extra = 0,0,0,0
-retract_restart_extra_toolchange = 0,0,0,0
-retract_speed = 80,80,80,80
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 1
-start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM201 X9000 Y9000 Z500 E10000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1500 T1500 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.2 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 0
-wipe = 1,1,1,1
-z_offset = 0
-
-[presets]
-print = 0.15mm OPTIMAL
-printer = Original Prusa i3 MK2 MultiMaterial
-filament = Prusa PLA
-filament_1 = Prusa PLA
-filament_2 = Prusa PLA
-filament_3 = Prusa PLA
diff --git a/resources/profiles/Original Prusa i3 MK3.ini b/resources/profiles/Original Prusa i3 MK3.ini
deleted file mode 100644
index b53006b0f..000000000
--- a/resources/profiles/Original Prusa i3 MK3.ini	
+++ /dev/null
@@ -1,3295 +0,0 @@
-# generated by Slic3r Prusa Edition 1.39.0 on 2018-02-02 at 10:48:46
-
-[print:0.05mm DETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 25%
-fill_pattern = cubic
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.5
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 30
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 30
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.3
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 30
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 180
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.05mm DETAIL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.28
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.3
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 20
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 20
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.18
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 20
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 200
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.05mm DETAIL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 10
-bridge_acceleration = 300
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 25%
-fill_pattern = grid
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 800
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 30
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 300
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 30
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.3
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 30
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 20
-top_solid_layers = 15
-travel_speed = 180
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 40
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 600
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.25
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.25
-fill_angle = 45
-fill_density = 15%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.25
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1600
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.25
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 600
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.25
-perimeter_speed = 25
-perimeters = 4
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.25
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.18
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.25
-top_solid_infill_speed = 30
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 170
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 170
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 170
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 9
-travel_speed = 170
-wipe_tower = 0
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm 100mms Linear Advance]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 100
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 30
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 70
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 40
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL 0.25 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 600
-bridge_angle = 0
-bridge_flow_ratio = 0.7
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.25
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.25
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.25
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1600
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.25
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 600
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.25
-perimeter_speed = 25
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.25
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.2
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0.15
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 35
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.25
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 40
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 170
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 170
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 170
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 7
-travel_speed = 170
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL SOLUBLE FULL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 25
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 1
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.15mm OPTIMAL SOLUBLE INTERFACE]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 25
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 30
-top_solid_layers = 7
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm 100mms Linear Advance]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 50
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 100
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 60
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 30
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 100
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 70
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm FAST MK3]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 1500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 170
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 170
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 45
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 170
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 50
-top_solid_layers = 5
-travel_speed = 170
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 50
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 0
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 40
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 50
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 40
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL SOLUBLE FULL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 1
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 30
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL SOLUBLE INTERFACE]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.1
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 30
-top_solid_layers = 5
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.7
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.43
-perimeter_speed = 50
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.7
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.43
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 7
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.35
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 45
-support_material_with_sheath = 0
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 50
-top_solid_layers = 9
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST sol full 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 4
-support_material_extrusion_width = 0.55
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 3
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 120%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.57
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.35mm FAST sol int 0.6 nozzle]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 1000
-bridge_angle = 0
-bridge_flow_ratio = 0.8
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.6
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.67
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.65
-first_layer_height = 0.2
-first_layer_speed = 30
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.75
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.35
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 3
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 0
-support_material_extrusion_width = 0.55
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 4
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 80
-support_material_with_sheath = 0
-support_material_xy_spacing = 150%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.57
-top_solid_infill_speed = 50
-top_solid_layers = 4
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 20
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[filament:ColorFabb Brass Bronze]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.3
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 210
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 210
-
-[filament:ColorFabb HT]
-bed_temperature = 105
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 105
-first_layer_temperature = 270
-max_fan_speed = 20
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 270
-
-[filament:ColorFabb PLA-PHA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:ColorFabb Woodfil]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 200
-
-[filament:ColorFabb XT]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 270
-
-[filament:ColorFabb XT-CF20]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 1
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 260
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 260
-
-[filament:ColorFabb nGen]
-bed_temperature = 85
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = NGEN
-first_layer_bed_temperature = 85
-first_layer_temperature = 240
-max_fan_speed = 35
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:ColorFabb nGen flex]
-bed_temperature = 85
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 5
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = FLEX
-first_layer_bed_temperature = 85
-first_layer_temperature = 260
-max_fan_speed = 35
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 260
-
-[filament:E3D Edge]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:E3D PC-ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 270
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 270
-
-[filament:Fillamentum ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 240
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 240
-
-[filament:Fillamentum ASA]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 265
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 265
-
-[filament:Fillamentum CPE HG100 HM100]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "CPE HG100 , CPE HM100"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 275
-max_fan_speed = 50
-min_fan_speed = 50
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 275
-
-[filament:Fillamentum Timberfil]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #804040
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 190
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 190
-
-[filament:Generic ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 255
-
-[filament:Generic PET]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:Generic PLA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:Polymaker PC-Max]
-bed_temperature = 120
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 120
-first_layer_temperature = 270
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 270
-
-[filament:Primavalue PVA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 1
-filament_type = PVA
-first_layer_bed_temperature = 60
-first_layer_temperature = 195
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 195
-
-[filament:Prusa ABS]
-bed_temperature = 100
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = ABS
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 255
-
-[filament:Prusa HIPS]
-bed_temperature = 100
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 0.9
-fan_always_on = 1
-fan_below_layer_time = 10
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 13
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 1
-filament_type = HIPS
-first_layer_bed_temperature = 100
-first_layer_temperature = 220
-max_fan_speed = 20
-min_fan_speed = 20
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 220
-
-[filament:Prusa PET]
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240
-
-[filament:Prusa PLA]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210
-
-[filament:SemiFlex or Flexfill 98A]
-bed_temperature = 50
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.2
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #00CA0A
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 1.5
-filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = FLEX
-first_layer_bed_temperature = 50
-first_layer_temperature = 240
-max_fan_speed = 90
-min_fan_speed = 70
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 240
-
-[filament:Taulman Bridge]
-bed_temperature = 50
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 5
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 250
-
-[filament:Taulman T-Glase]
-bed_temperature = 90
-bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PET
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 5
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 240
-
-[filament:Verbatim BVOH]
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 0
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
-filament_soluble = 1
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 210
-
-[filament:Verbatim PP]
-bed_temperature = 100
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-cooling = 1
-disable_fan_first_layers = 2
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 5
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 100
-first_layer_temperature = 220
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
-temperature = 220
-
-[printer:Original Prusa i3 MK3]
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-between_objects_gcode = 
-deretract_speed = 0
-end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
-extruder_colour = #FFFF00
-extruder_offset = 0x0
-gcode_flavor = marlin
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25
-min_layer_height = 0.07
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
-retract_before_travel = 1
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 0.8
-retract_length_toolchange = 3
-retract_lift = 0.6
-retract_lift_above = 0
-retract_lift_below = 209
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 35
-serial_port = 
-serial_speed = 250000
-single_extruder_multi_material = 0
-start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[presets]
-print = 0.15mm OPTIMAL MK3
-printer = Original Prusa i3 MK3
-filament = Prusa PLA
diff --git a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini b/resources/profiles/PrusaResearch.ini
similarity index 80%
rename from resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini
rename to resources/profiles/PrusaResearch.ini
index 3c3602edb..43d2ecbd1 100644
--- a/resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini	
+++ b/resources/profiles/PrusaResearch.ini
@@ -1,4 +1,28 @@
-# generated by Slic3r Prusa Edition 1.39.0.29-prusa3d-win64 on 2018-01-22 at 14:53:14
+# Print profiles for the Prusa Research printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Prusa Research
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the Slic3r configuration to be downgraded.
+config_version = 0.1
+# Where to get the updates from?
+config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch.ini
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+#TODO: One day we may differentiate variants of the nozzles / hot ends,
+#for example by the melt zone size, or whether the nozzle is hardened.
+[printer_model:MK3]
+variants = 0.4; 0.25; 0.6
+
+[printer_model:MK2S]
+variants = 0.4; 0.25; 0.6
+
+[printer_model:MK2SMM]
+# Printer model name will be shown by the installation wizard.
+name = MK2S Multi Material
+variants = 0.4; 0.6
 
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
@@ -52,6 +76,7 @@ overhangs = 0
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
+perimeters = 2
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 post_process = 
@@ -76,10 +101,13 @@ support_material_interface_extruder = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
 support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
 support_material_interface_contact_loops = 0
 support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
+support_material_spacing = 2
 support_material_speed = 50
 support_material_synchronize_layers = 0
 support_material_threshold = 45
@@ -116,7 +144,7 @@ support_material_xy_spacing = 150%
 external_perimeter_extrusion_width = 0.61
 extrusion_width = 0.67
 first_layer_extrusion_width = 0.65
-infill_extrusion_width = 0.75
+infill_extrusion_width = 0.7
 perimeter_extrusion_width = 0.65
 solid_infill_extrusion_width = 0.65
 top_infill_extrusion_width = 0.6
@@ -133,7 +161,6 @@ support_material_interface_spacing = 0.1
 support_material_synchronize_layers = 1
 support_material_threshold = 80
 support_material_with_sheath = 1
-support_material_xy_spacing = 120%
 wipe_tower = 1
 
 [print:*0.05mm*]
@@ -143,7 +170,7 @@ bridge_acceleration = 300
 bridge_flow_ratio = 0.7
 default_acceleration = 500
 external_perimeter_speed = 20
-fill_density = 25%
+fill_density = 20%
 first_layer_acceleration = 500
 gap_fill_speed = 20
 infill_acceleration = 800
@@ -152,30 +179,28 @@ max_print_speed = 80
 small_perimeter_speed = 15
 solid_infill_speed = 30
 support_material_extrusion_width = 0.3
-support_material_interface_spacing = 0.2
 support_material_spacing = 1.5
 layer_height = 0.05
 perimeter_acceleration = 300
 perimeter_speed = 30
 perimeters = 3
-support_material_contact_distance = 0.15
 support_material_speed = 30
 top_solid_infill_speed = 20
 top_solid_layers = 15
 
-[print:0.05mm DETAIL]
+[print:0.05mm ULTRADETAIL]
 inherits = *0.05mm*
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
 infill_extrusion_width = 0.5
 
-[print:0.05mm DETAIL MK3]
+[print:0.05mm ULTRADETAIL MK3]
 inherits = *0.05mm*
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/  and nozzle_diameter[0]==0.4
 fill_pattern = grid
 top_infill_extrusion_width = 0.4
 
-[print:0.05mm DETAIL 0.25 nozzle]
-inherits = *0.05mm*; *0.25nozzle*
+[print:0.05mm ULTRADETAIL 0.25 nozzle]
+inherits = *0.05mm*
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
 external_perimeter_extrusion_width = 0
 extrusion_width = 0.28
@@ -186,13 +211,18 @@ infill_speed = 20
 max_print_speed = 100
 perimeter_extrusion_width = 0
 perimeter_speed = 20
-perimeters = 4
 small_perimeter_speed = 10
 solid_infill_extrusion_width = 0
 solid_infill_speed = 20
 support_material_speed = 20
 top_infill_extrusion_width = 0
 
+[print:0.05mm ULTRADETAIL 0.25 nozzle MK3]
+inherits = *0.05mm*; *0.25nozzle*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
+fill_pattern = grid
+top_infill_extrusion_width = 0.4
+
 [print:*0.10mm*]
 inherits = *common*
 bottom_solid_layers = 7
@@ -200,9 +230,6 @@ bridge_flow_ratio = 0.7
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
 layer_height = 0.1
 perimeter_acceleration = 800
-support_material_contact_distance = 0.15
-support_material_interface_spacing = 0.2
-support_material_spacing = 2
 top_solid_layers = 9
 
 [print:0.10mm DETAIL]
@@ -212,40 +239,63 @@ external_perimeter_speed = 40
 infill_acceleration = 2000
 infill_speed = 60
 perimeter_speed = 50
-perimeters = 3
 solid_infill_speed = 50
 
 [print:0.10mm DETAIL MK3]
 inherits = *0.10mm*
-bridge_flow_ratio = 0.8
 bridge_speed = 30
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 external_perimeter_speed = 35
 fill_pattern = grid
 infill_acceleration = 1500
 infill_speed = 170
-max_print_speed = 170
+max_print_speed = 200
 perimeter_speed = 45
-perimeters = 2
 solid_infill_speed = 170
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 50
 
 [print:0.10mm DETAIL 0.25 nozzle]
-inherits = *0.10mm*; *0.25nozzle*
+inherits = *0.10mm*
 bridge_acceleration = 600
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
 external_perimeter_speed = 20
-fill_density = 15%
 infill_acceleration = 1600
 infill_speed = 40
 perimeter_acceleration = 600
 perimeter_speed = 25
-perimeters = 4
 small_perimeter_speed = 10
 solid_infill_speed = 40
 top_solid_infill_speed = 30
 
+[print:0.10mm DETAIL 0.25 nozzle MK3]
+inherits = *0.10mm*
+bridge_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 170
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 170
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+
+[print:0.10mm DETAIL 0.6 nozzle MK3]
+inherits = *0.10mm*
+bridge_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 170
+max_print_speed = 200
+perimeter_speed = 45
+solid_infill_speed = 170
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+
 [print:*0.15mm*]
 inherits = *common*
 bottom_solid_layers = 5
@@ -255,29 +305,22 @@ infill_speed = 60
 layer_height = 0.15
 perimeter_acceleration = 800
 perimeter_speed = 50
-perimeters = 3
 solid_infill_speed = 50
-support_material_contact_distance = 0.15
-support_material_interface_spacing = 0.2
-support_material_spacing = 2
 top_infill_extrusion_width = 0.4
 top_solid_layers = 7
 
 [print:0.15mm 100mms Linear Advance]
 inherits = *0.15mm*
-bottom_solid_layers = 4
 bridge_flow_ratio = 0.95
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
 external_perimeter_speed = 50
 infill_speed = 100
 max_print_speed = 150
 perimeter_speed = 60
-perimeters = 2
 small_perimeter_speed = 30
 solid_infill_speed = 100
 support_material_speed = 60
 top_solid_infill_speed = 70
-top_solid_layers = 5
 
 [print:0.15mm OPTIMAL]
 inherits = *0.15mm*
@@ -294,44 +337,38 @@ infill_acceleration = 1600
 infill_speed = 40
 perimeter_acceleration = 600
 perimeter_speed = 25
-perimeters = 2
 small_perimeter_speed = 10
 solid_infill_speed = 40
 support_material_extrusion_width = 0.2
-support_material_threshold = 35
 top_solid_infill_speed = 30
 
 [print:0.15mm OPTIMAL 0.6 nozzle]
 inherits = *0.15mm*; *0.6nozzle*
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-wipe_tower = 1
 
 [print:0.15mm OPTIMAL MK3]
 inherits = *0.15mm*
 bridge_speed = 30
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 external_perimeter_speed = 35
 fill_pattern = grid
 infill_acceleration = 1500
 infill_speed = 170
 max_print_speed = 170
 perimeter_speed = 45
-perimeters = 2
 solid_infill_speed = 170
 top_solid_infill_speed = 50
-wipe_tower = 1
 
 [print:0.15mm OPTIMAL SOLUBLE FULL]
 inherits = *0.15mm*; *soluble_support*
-bottom_solid_layers = 5
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
 external_perimeter_speed = 25
 notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
 perimeter_speed = 40
 solid_infill_speed = 40
-support_material_xy_spacing = 60%
 top_infill_extrusion_width = 0.45
 top_solid_infill_speed = 30
+wipe_tower = 1
 
 [print:0.15mm OPTIMAL SOLUBLE INTERFACE]
 inherits = 0.15mm OPTIMAL SOLUBLE FULL
@@ -339,8 +376,20 @@ notes = Set your solluble extruder in Multiple Extruders >  Support material/raf
 support_material_extruder = 0
 support_material_interface_layers = 3
 support_material_with_sheath = 0
-support_material_xy_spacing = 120%
+support_material_xy_spacing = 80%
 
+[print:0.15mm OPTIMAL 0.25 nozzle MK3]
+inherits = *0.15mm*
+bridge_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 170
+max_print_speed = 170
+perimeter_speed = 45
+solid_infill_speed = 170
+top_solid_infill_speed = 50
 [print:*0.20mm*]
 inherits = *common*
 bottom_solid_layers = 4
@@ -351,14 +400,22 @@ infill_speed = 60
 layer_height = 0.2
 perimeter_acceleration = 800
 perimeter_speed = 50
-perimeters = 2
 solid_infill_speed = 50
-support_material_contact_distance = 0.15
-support_material_interface_spacing = 0.2
-support_material_spacing = 2
 top_infill_extrusion_width = 0.4
 top_solid_layers = 5
-wipe_tower = 1
+
+[print:0.15mm OPTIMAL 0.6 nozzle MK3]
+inherits = *0.15mm*
+bridge_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 170
+max_print_speed = 170
+perimeter_speed = 45
+solid_infill_speed = 170
+top_solid_infill_speed = 50
 
 [print:0.20mm 100mms Linear Advance]
 inherits = *0.20mm*
@@ -375,8 +432,7 @@ top_solid_infill_speed = 70
 [print:0.20mm FAST MK3]
 inherits = *0.20mm*
 bridge_speed = 30
-bridge_flow_ratio = 0.8
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
 external_perimeter_speed = 35
 fill_pattern = grid
 infill_acceleration = 1500
@@ -392,9 +448,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 
 [print:0.20mm NORMAL 0.6 nozzle]
 inherits = *0.20mm*; *0.6nozzle*
-bridge_flow_ratio = 0.8
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-perimeters = 3
 
 [print:0.20mm NORMAL SOLUBLE FULL]
 inherits = *0.20mm*; *soluble_support*
@@ -411,6 +465,20 @@ notes = Set your solluble extruder in Multiple Extruders >  Support material/raf
 support_material_extruder = 0
 support_material_interface_layers = 3
 support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+
+[print:0.20mm FAST 0.6 nozzle MK3]
+inherits = *0.20mm*
+bridge_speed = 30
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6
+external_perimeter_speed = 35
+fill_pattern = grid
+infill_acceleration = 1500
+infill_speed = 170
+max_print_speed = 170
+perimeter_speed = 45
+solid_infill_speed = 170
+top_solid_infill_speed = 50
 
 [print:*0.35mm*]
 inherits = *common*
@@ -419,38 +487,28 @@ external_perimeter_extrusion_width = 0.6
 external_perimeter_speed = 40
 first_layer_extrusion_width = 0.75
 infill_acceleration = 2000
-infill_extrusion_width = 0.75
 infill_speed = 60
 layer_height = 0.35
 perimeter_acceleration = 800
 perimeter_extrusion_width = 0.65
 perimeter_speed = 50
-perimeters = 2
 solid_infill_extrusion_width = 0.65
 solid_infill_speed = 60
-support_material_contact_distance = 0.15
-support_material_interface_spacing = 0.2
-support_material_spacing = 2
 top_solid_infill_speed = 50
 top_solid_layers = 4
-wipe_tower = 1
 
 [print:0.35mm FAST]
 inherits = *0.35mm*
 bridge_flow_ratio = 0.95
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
 first_layer_extrusion_width = 0.42
-infill_extrusion_width = 0.7
 perimeter_extrusion_width = 0.43
 solid_infill_extrusion_width = 0.7
 top_infill_extrusion_width = 0.43
 
 [print:0.35mm FAST 0.6 nozzle]
 inherits = *0.35mm*; *0.6nozzle*
-bottom_solid_layers = 7
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
-perimeters = 3
-top_solid_layers = 9
 
 [print:0.35mm FAST sol full 0.6 nozzle]
 inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
@@ -461,14 +519,14 @@ notes = Set your solluble extruder in Multiple Extruders >  Support material/raf
 perimeter_speed = 40
 support_material_extrusion_width = 0.55
 support_material_interface_layers = 3
-support_material_interface_spacing = 0.2
-support_material_with_sheath = 0
+support_material_xy_spacing = 120%
 top_infill_extrusion_width = 0.57
 
 [print:0.35mm FAST sol int 0.6 nozzle]
 inherits = 0.35mm FAST sol full 0.6 nozzle
 support_material_extruder = 0
 support_material_interface_layers = 2
+support_material_with_sheath = 0
 support_material_xy_spacing = 150%
 
 [filament:*common*]
@@ -480,6 +538,7 @@ extrusion_multiplier = 1
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
+filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
 min_print_speed = 5
@@ -510,7 +569,7 @@ disable_fan_first_layers = 3
 fan_always_on = 1
 fan_below_layer_time = 20
 filament_colour = #FF8000
-filament_max_volumetric_speed = 10
+filament_max_volumetric_speed = 8
 filament_type = PET
 first_layer_bed_temperature = 85
 first_layer_temperature = 230
@@ -521,19 +580,19 @@ temperature = 240
 
 [filament:*ABS*]
 inherits = *common*
-bed_temperature = 100
+bed_temperature = 110
 bridge_fan_speed = 30
 cooling = 0
 disable_fan_first_layers = 3
 fan_always_on = 0
 fan_below_layer_time = 20
 filament_colour = #3A80CA
-filament_max_volumetric_speed = 13
+filament_max_volumetric_speed = 11
 filament_type = ABS
 first_layer_bed_temperature = 100
 first_layer_temperature = 255
 max_fan_speed = 30
-min_fan_speed = 10
+min_fan_speed = 20
 temperature = 255
 
 [filament:*FLEX*]
@@ -545,6 +604,7 @@ disable_fan_first_layers = 1
 extrusion_multiplier = 1.2
 fan_always_on = 0
 fan_below_layer_time = 100
+filament_colour = #00CA0A
 filament_max_volumetric_speed = 1.5
 filament_type = FLEX
 first_layer_bed_temperature = 50
@@ -557,43 +617,28 @@ temperature = 240
 [filament:ColorFabb Brass Bronze]
 inherits = *PLA*
 compatible_printers_condition = nozzle_diameter[0]>0.35
-extrusion_multiplier = 1.3
+extrusion_multiplier = 1.2
 filament_colour = #804040
 filament_max_volumetric_speed = 10
-min_print_speed = 5
 
 [filament:ColorFabb HT]
-bed_temperature = 105
+inherits = *PET*
+bed_temperature = 110
 bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = 
 cooling = 1
 disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 10
-filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
-filament_soluble = 0
-filament_type = PLA
 first_layer_bed_temperature = 105
 first_layer_temperature = 270
 max_fan_speed = 20
 min_fan_speed = 10
 min_print_speed = 5
-slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
 
 [filament:ColorFabb PLA-PHA]
 inherits = *PLA*
-filament_colour = #FF3232
 
 [filament:ColorFabb Woodfil]
 inherits = *PLA*
@@ -608,7 +653,6 @@ temperature = 200
 
 [filament:ColorFabb XT]
 inherits = *PET*
-filament_colour = #FF8000
 filament_type = PLA
 first_layer_bed_temperature = 90
 first_layer_temperature = 260
@@ -629,21 +673,19 @@ inherits = *PET*
 bridge_fan_speed = 40
 fan_always_on = 0
 fan_below_layer_time = 10
-filament_colour = #FF8000
 filament_type = NGEN
 first_layer_temperature = 240
 max_fan_speed = 35
 min_fan_speed = 20
 
 [filament:ColorFabb nGen flex]
-inherits = *flex*
+inherits = *FLEX*
 bed_temperature = 85
 bridge_fan_speed = 40
 cooling = 1
 disable_fan_first_layers = 3
 extrusion_multiplier = 1
 fan_below_layer_time = 10
-filament_colour = #FF8000
 filament_max_volumetric_speed = 5
 first_layer_bed_temperature = 85
 first_layer_temperature = 260
@@ -653,31 +695,26 @@ temperature = 260
 
 [filament:E3D Edge]
 inherits = *PET*
-filament_colour = #FF8000
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 
 [filament:E3D PC-ABS]
 inherits = *ABS*
-filament_colour = #3A80CA
 first_layer_temperature = 270
 temperature = 270
 
 [filament:Fillamentum ABS]
 inherits = *ABS*
-filament_colour = #3A80CA
 first_layer_temperature = 240
 temperature = 240
 
 [filament:Fillamentum ASA]
+inherits = *ABS*
 fan_always_on = 1
-filament_colour = #3A80CA
 first_layer_temperature = 265
 temperature = 265
 
 [filament:Fillamentum CPE HG100 HM100]
 inherits = *PET*
-disable_fan_first_layers = 1
-filament_colour = #FF8000
 filament_notes = "CPE HG100 , CPE HM100"
 first_layer_bed_temperature = 90
 first_layer_temperature = 275
@@ -709,9 +746,9 @@ filament_notes = "List of materials tested with standart PLA print settings for
 
 [filament:Polymaker PC-Max]
 inherits = *ABS*
-bed_temperature = 120
+bed_temperature = 115
 filament_colour = #3A80CA
-first_layer_bed_temperature = 120
+first_layer_bed_temperature = 100
 first_layer_temperature = 270
 temperature = 270
 
@@ -754,38 +791,28 @@ filament_notes = "List of manufacturers tested with standart PET print settings
 
 [filament:Prusa PLA]
 inherits = *PLA*
-filament_colour = #FF3232
 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
 
 [filament:SemiFlex or Flexfill 98A]
-inherits = *flex*
+inherits = *FLEX*
 
 [filament:Taulman Bridge]
-bed_temperature = 50
+inherits = *common*
+bed_temperature = 90
 bridge_fan_speed = 40
-compatible_printers = 
-compatible_printers_condition = 
 cooling = 0
 disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 20
 filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
 filament_max_volumetric_speed = 10
-filament_notes = ""
-filament_settings_id = 
 filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 90
+filament_type = PET
+first_layer_bed_temperature = 60
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
 min_print_speed = 5
-slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 250
 
@@ -794,7 +821,6 @@ inherits = *PET*
 bridge_fan_speed = 40
 cooling = 0
 fan_always_on = 0
-filament_colour = #FF8000
 first_layer_bed_temperature = 90
 first_layer_temperature = 240
 max_fan_speed = 5
@@ -802,23 +828,17 @@ min_fan_speed = 0
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 
 [filament:Verbatim BVOH]
+inherits = *common*
 bed_temperature = 60
 bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
 cooling = 0
 disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 100
 filament_colour = #FFFFD7
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
 filament_max_volumetric_speed = 10
 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_settings_id = 
 filament_soluble = 1
 filament_type = PLA
 first_layer_bed_temperature = 60
@@ -826,36 +846,27 @@ first_layer_temperature = 215
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
 
 [filament:Verbatim PP]
+inherits = *common*
 bed_temperature = 100
 bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
 cooling = 1
 disable_fan_first_layers = 2
-end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
 filament_colour = #DEE0E6
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
 filament_max_volumetric_speed = 5
 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
-filament_settings_id = 
-filament_soluble = 0
 filament_type = PLA
 first_layer_bed_temperature = 100
 first_layer_temperature = 220
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
 
@@ -880,7 +891,7 @@ retract_before_travel = 1
 retract_before_wipe = 0%
 retract_layer_change = 1
 retract_length = 0.8
-retract_length_toolchange = 3
+retract_length_toolchange = 4
 retract_lift = 0.6
 retract_lift_above = 0
 retract_lift_below = 199
@@ -898,6 +909,10 @@ use_volumetric_e = 0
 variable_layer_height = 1
 wipe = 1
 z_offset = 0
+#printer_model = MK2S
+#printer_variant = 0.4
+#default_print_profile = 0.15mm OPTIMAL
+#default_filament_profile = Prusa PLA
 
 [printer:*multimaterial*]
 inherits = *common*
@@ -906,7 +921,6 @@ retract_before_travel = 3
 retract_before_wipe = 60%
 retract_layer_change = 0
 retract_length = 4
-retract_length_toolchange = 4
 retract_lift = 0.6
 retract_lift_above = 0
 retract_lift_below = 199
@@ -914,6 +928,7 @@ retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 80
 single_extruder_multi_material = 1
+#printer_model = MK2SMM
 
 [printer:*mm-single*]
 inherits = *multimaterial*
@@ -941,12 +956,15 @@ nozzle_diameter = 0.25
 retract_length = 1
 retract_speed = 50
 variable_layer_height = 0
+#printer_variant = 0.25
+#default_print_profile = 0.10mm DETAIL 0.25 nozzle
 
 [printer:Original Prusa i3 MK2 0.6 nozzle]
 inherits = *common*
 max_layer_height = 0.35
 min_layer_height = 0.1
 nozzle_diameter = 0.6
+#printer_variant = 0.6
 
 [printer:Original Prusa i3 MK2 MM Single Mode]
 inherits = *mm-single*
@@ -954,6 +972,7 @@ inherits = *mm-single*
 [printer:Original Prusa i3 MK2 MM Single Mode 0.6 nozzle]
 inherits = *mm-single*
 nozzle_diameter = 0.6
+#printer_variant = 0.6
 
 [printer:Original Prusa i3 MK2 MultiMaterial]
 inherits = *mm-multi*
@@ -962,6 +981,7 @@ nozzle_diameter = 0.4,0.4,0.4,0.4
 [printer:Original Prusa i3 MK2 MultiMaterial 0.6 nozzle]
 inherits = *mm-multi*
 nozzle_diameter = 0.6,0.6,0.6,0.6
+#printer_variant = 0.6
 
 [printer:Original Prusa i3 MK3]
 inherits = *common*
@@ -969,6 +989,28 @@ end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
 retract_lift_below = 209
 start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
+#printer_model = MK3
+#default_print_profile = 0.15mm OPTIMAL MK3
+
+[printer:Original Prusa i3 MK3 0.25 nozzle]
+inherits = *common*
+nozzle_diameter = 0.25
+end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+retract_lift_below = 209
+start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
+#printer_model = MK3
+#default_print_profile = 0.10mm DETAIL MK3
+
+[printer:Original Prusa i3 MK3 0.6 nozzle]
+inherits = *common*
+nozzle_diameter = 0.6
+end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+retract_lift_below = 209
+start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
+#printer_model = MK3
+#default_print_profile = 0.15mm OPTIMAL MK3
 
 [presets]
 print = 0.15mm OPTIMAL MK3
diff --git a/slic3r.pl b/slic3r.pl
index a3cc3cfc2..d9bed0ab6 100755
--- a/slic3r.pl
+++ b/slic3r.pl
@@ -12,7 +12,7 @@ BEGIN {
 use File::Basename qw(basename);
 use Getopt::Long qw(:config no_auto_abbrev);
 use List::Util qw(first);
-use POSIX qw(setlocale LC_NUMERIC);
+#use POSIX qw(setlocale LC_NUMERIC);
 use Slic3r;
 use Slic3r::Geometry qw(deg2rad);
 use Time::HiRes qw(gettimeofday tv_interval);
@@ -112,7 +112,7 @@ if ((!@ARGV || $opt{gui}) && !$opt{no_gui} && !$opt{save} && eval "require Slic3
         $Slic3r::GUI::autosave      = $opt{autosave};
     }
     $gui = Slic3r::GUI->new;
-    setlocale(LC_NUMERIC, 'C');
+    #setlocale(LC_NUMERIC, 'C');
     $gui->{mainframe}->load_config_file($_) for @{$opt{load}};
     $gui->{mainframe}->load_config($cli_config);
     my @input_files = @ARGV;
diff --git a/t/svg.t b/t/svg.t
index 6092efe24..47d24ceb8 100644
--- a/t/svg.t
+++ b/t/svg.t
@@ -10,6 +10,7 @@ BEGIN {
 
 use Slic3r;
 use Slic3r::Test;
+use IO::Scalar;
 
 {
     my $print = Slic3r::Test::init_print('20mm_cube');
diff --git a/utils/gcode_sectioncut.pl b/utils/gcode_sectioncut.pl
index afc011ce8..e83f3fcda 100644
--- a/utils/gcode_sectioncut.pl
+++ b/utils/gcode_sectioncut.pl
@@ -11,7 +11,6 @@ BEGIN {
 }
 
 use Getopt::Long qw(:config no_auto_abbrev);
-use IO::All;
 use List::Util qw(max);
 use Slic3r;
 use Slic3r::Geometry qw(X Y);
diff --git a/xs/CMakeLists.txt b/xs/CMakeLists.txt
index 0d93ede61..0c4a04bbb 100644
--- a/xs/CMakeLists.txt
+++ b/xs/CMakeLists.txt
@@ -203,6 +203,8 @@ add_library(libslic3r_gui STATIC
     ${LIBDIR}/slic3r/GUI/WipeTowerDialog.hpp
     ${LIBDIR}/slic3r/GUI/RammingChart.cpp
     ${LIBDIR}/slic3r/GUI/RammingChart.hpp
+    ${LIBDIR}/slic3r/GUI/BonjourDialog.cpp
+    ${LIBDIR}/slic3r/GUI/BonjourDialog.hpp
     ${LIBDIR}/slic3r/Utils/Http.cpp
     ${LIBDIR}/slic3r/Utils/Http.hpp
     ${LIBDIR}/slic3r/Utils/OctoPrint.cpp
diff --git a/xs/src/libslic3r/BoundingBox.hpp b/xs/src/libslic3r/BoundingBox.hpp
index a7334308c..92a2bd451 100644
--- a/xs/src/libslic3r/BoundingBox.hpp
+++ b/xs/src/libslic3r/BoundingBox.hpp
@@ -94,6 +94,14 @@ public:
     void translate(const Pointf3 &pos) { this->translate(pos.x, pos.y, pos.z); }
     void offset(coordf_t delta);
     PointClass center() const;
+
+    bool contains(const PointClass &point) const {
+        return BoundingBoxBase<PointClass>::contains(point) && point.z >= this->min.z && point.z <= this->max.z;
+    }
+
+    bool contains(const BoundingBox3Base<PointClass>& other) const {
+        return contains(other.min) && contains(other.max);
+    }
 };
 
 class BoundingBox : public BoundingBoxBase<Point>
diff --git a/xs/src/libslic3r/Format/3mf.cpp b/xs/src/libslic3r/Format/3mf.cpp
index 029debf72..b34b8989e 100644
--- a/xs/src/libslic3r/Format/3mf.cpp
+++ b/xs/src/libslic3r/Format/3mf.cpp
@@ -21,7 +21,8 @@ const std::string MODEL_EXTENSION = ".model";
 const std::string MODEL_FILE = "3D/3dmodel.model"; // << this is the only format of the string which works with CURA
 const std::string CONTENT_TYPES_FILE = "[Content_Types].xml";
 const std::string RELATIONSHIPS_FILE = "_rels/.rels";
-const std::string CONFIG_FILE = "Metadata/Slic3r_PE.config";
+const std::string PRINT_CONFIG_FILE = "Metadata/Slic3r_PE.config";
+const std::string MODEL_CONFIG_FILE = "Metadata/Slic3r_PE_model.config";
 
 const char* MODEL_TAG = "model";
 const char* RESOURCES_TAG = "resources";
@@ -36,6 +37,10 @@ const char* COMPONENT_TAG = "component";
 const char* BUILD_TAG = "build";
 const char* ITEM_TAG = "item";
 
+const char* CONFIG_TAG = "config";
+const char* METADATA_TAG = "metadata";
+const char* VOLUME_TAG = "volume";
+
 const char* UNIT_ATTR = "unit";
 const char* NAME_ATTR = "name";
 const char* TYPE_ATTR = "type";
@@ -49,6 +54,17 @@ const char* V3_ATTR = "v3";
 const char* OBJECTID_ATTR = "objectid";
 const char* TRANSFORM_ATTR = "transform";
 
+const char* KEY_ATTR = "key";
+const char* VALUE_ATTR = "value";
+const char* FIRST_TRIANGLE_ID_ATTR = "firstid";
+const char* LAST_TRIANGLE_ID_ATTR = "lastid";
+
+const char* OBJECT_TYPE = "object";
+const char* VOLUME_TYPE = "volume";
+
+const char* NAME_KEY = "name";
+const char* MODIFIER_KEY = "modifier";
+
 const unsigned int VALID_OBJECT_TYPES_COUNT = 1;
 const char* VALID_OBJECT_TYPES[] =
 {
@@ -188,32 +204,63 @@ namespace Slic3r {
             int object_id;
             Matrix4x4 matrix;
 
-            explicit Component(int object_id);
-            Component(int object_id, const Matrix4x4& matrix);
+            explicit Component(int object_id)
+                : object_id(object_id)
+                , matrix(Matrix4x4::Identity())
+            {
+            }
+
+            Component(int object_id, const Matrix4x4& matrix)
+                : object_id(object_id)
+                , matrix(matrix)
+            {
+            }
         };
 
         typedef std::vector<Component> ComponentsList;
 
+        struct Geometry
+        {
+            std::vector<float> vertices;
+            std::vector<unsigned int> triangles;
+
+            bool empty()
+            {
+                return vertices.empty() || triangles.empty();
+            }
+
+            void reset()
+            {
+                vertices.clear();
+                triangles.clear();
+            }
+        };
+
         struct CurrentObject
         {
-            struct Geometry
-            {
-                std::vector<float> vertices;
-                std::vector<unsigned int> triangles;
-
-                bool empty();
-                void reset();
-            };
-
             int id;
             Geometry geometry;
             ModelObject* object;
-            TriangleMesh mesh;
             ComponentsList components;
 
-            CurrentObject();
+            CurrentObject()
+            {
+                reset();
+            }
 
-            void reset();
+            void reset()
+            {
+                id = -1;
+                geometry.reset();
+                object = nullptr;
+                components.clear();
+            }
+        };
+
+        struct CurrentConfig
+        {
+            int object_id;
+            int volume_id;
         };
 
         struct Instance
@@ -221,12 +268,53 @@ namespace Slic3r {
             ModelInstance* instance;
             Matrix4x4 matrix;
 
-            Instance(ModelInstance* instance, const Matrix4x4& matrix);
+            Instance(ModelInstance* instance, const Matrix4x4& matrix)
+                : instance(instance)
+                , matrix(matrix)
+            {
+            }
+        };
+
+        struct Metadata
+        {
+            std::string key;
+            std::string value;
+
+            Metadata(const std::string& key, const std::string& value)
+                : key(key)
+                , value(value)
+            {
+            }
+        };
+
+        typedef std::vector<Metadata> MetadataList;
+
+        struct ObjectMetadata
+        {
+            struct VolumeMetadata
+            {
+                unsigned int first_triangle_id;
+                unsigned int last_triangle_id;
+                MetadataList metadata;
+
+                VolumeMetadata(unsigned int first_triangle_id, unsigned int last_triangle_id)
+                    : first_triangle_id(first_triangle_id)
+                    , last_triangle_id(last_triangle_id)
+                {
+                }
+            };
+
+            typedef std::vector<VolumeMetadata> VolumeMetadataList;
+
+            MetadataList metadata;
+            VolumeMetadataList volumes;
         };
 
         typedef std::map<int, ModelObject*> IdToModelObjectMap;
         typedef std::map<int, ComponentsList> IdToAliasesMap;
         typedef std::vector<Instance> InstancesList;
+        typedef std::map<int, ObjectMetadata> IdToMetadataMap;
+        typedef std::map<int, Geometry> IdToGeometryMap;
 
         XML_Parser m_xml_parser;
         Model* m_model;
@@ -235,6 +323,9 @@ namespace Slic3r {
         IdToModelObjectMap m_objects;
         IdToAliasesMap m_objects_aliases;
         InstancesList m_instances;
+        IdToGeometryMap m_geometries;
+        CurrentConfig m_curr_config;
+        IdToMetadataMap m_objects_metadata;
 
     public:
         _3MF_Importer();
@@ -248,10 +339,16 @@ namespace Slic3r {
 
         bool _load_model_from_file(const std::string& filename, Model& model, PresetBundle& bundle);
         bool _extract_model_from_archive(mz_zip_archive& archive, const mz_zip_archive_file_stat& stat);
-        bool _extract_config_from_archive(mz_zip_archive& archive, const mz_zip_archive_file_stat& stat, PresetBundle& bundle, const std::string& archive_filename);
+        bool _extract_print_config_from_archive(mz_zip_archive& archive, const mz_zip_archive_file_stat& stat, PresetBundle& bundle, const std::string& archive_filename);
+        bool _extract_model_config_from_archive(mz_zip_archive& archive, const mz_zip_archive_file_stat& stat, Model& model);
 
-        void _handle_start_xml_element(const char* name, const char** attributes);
-        void _handle_end_xml_element(const char* name);
+        // handlers to parse the .model file
+        void _handle_start_model_xml_element(const char* name, const char** attributes);
+        void _handle_end_model_xml_element(const char* name);
+
+        // handlers to parse the MODEL_CONFIG_FILE file
+        void _handle_start_config_xml_element(const char* name, const char** attributes);
+        void _handle_end_config_xml_element(const char* name);
 
         bool _handle_start_model(const char** attributes, unsigned int num_attributes);
         bool _handle_end_model();
@@ -294,53 +391,29 @@ namespace Slic3r {
         void _apply_transform(ModelObject& object, const Matrix4x4& matrix);
         void _apply_transform(ModelInstance& instance, const Matrix4x4& matrix);
 
-        static void XMLCALL _handle_start_xml_element(void* userData, const char* name, const char** attributes);
-        static void XMLCALL _handle_end_xml_element(void* userData, const char* name);
+        bool _handle_start_config(const char** attributes, unsigned int num_attributes);
+        bool _handle_end_config();
+
+        bool _handle_start_config_object(const char** attributes, unsigned int num_attributes);
+        bool _handle_end_config_object();
+
+        bool _handle_start_config_volume(const char** attributes, unsigned int num_attributes);
+        bool _handle_end_config_volume();
+
+        bool _handle_start_config_metadata(const char** attributes, unsigned int num_attributes);
+        bool _handle_end_config_metadata();
+
+        bool _generate_volumes(ModelObject& object, const Geometry& geometry, const ObjectMetadata::VolumeMetadataList& volumes);
+
+        // callbacks to parse the .model file
+        static void XMLCALL _handle_start_model_xml_element(void* userData, const char* name, const char** attributes);
+        static void XMLCALL _handle_end_model_xml_element(void* userData, const char* name);
+
+        // callbacks to parse the MODEL_CONFIG_FILE file
+        static void XMLCALL _handle_start_config_xml_element(void* userData, const char* name, const char** attributes);
+        static void XMLCALL _handle_end_config_xml_element(void* userData, const char* name);
     };
 
-    _3MF_Importer::Component::Component(int object_id)
-        : object_id(object_id)
-        , matrix(Matrix4x4::Identity())
-    {
-    }
-
-    _3MF_Importer::Component::Component(int object_id, const Matrix4x4& matrix)
-        : object_id(object_id)
-        , matrix(matrix)
-    {
-    }
-
-    bool _3MF_Importer::CurrentObject::Geometry::empty()
-    {
-        return vertices.empty() || triangles.empty();
-    }
-
-    void _3MF_Importer::CurrentObject::Geometry::reset()
-    {
-        vertices.clear();
-        triangles.clear();
-    }
-
-    _3MF_Importer::CurrentObject::CurrentObject()
-    {
-        reset();
-    }
-
-    void _3MF_Importer::CurrentObject::reset()
-    {
-        id = -1;
-        geometry.reset();
-        object = nullptr;
-        mesh = TriangleMesh();
-        components.clear();
-    }
-
-    _3MF_Importer::Instance::Instance(ModelInstance* instance, const Matrix4x4& matrix)
-        : instance(instance)
-        , matrix(matrix)
-    {
-    }
-
     _3MF_Importer::_3MF_Importer()
         : m_xml_parser(nullptr)
         , m_model(nullptr)   
@@ -361,6 +434,10 @@ namespace Slic3r {
         m_objects.clear();
         m_objects_aliases.clear();
         m_instances.clear();
+        m_geometries.clear();
+        m_curr_config.object_id = -1;
+        m_curr_config.volume_id = -1;
+        m_objects_metadata.clear();
         clear_errors();
 
         return _load_model_from_file(filename, model, bundle);
@@ -413,13 +490,23 @@ namespace Slic3r {
                         return false;
                     }
                 }
-                else if (boost::algorithm::iequals(name, CONFIG_FILE))
+                else if (boost::algorithm::iequals(name, PRINT_CONFIG_FILE))
                 {
-                    // extract slic3r config file
-                    if (!_extract_config_from_archive(archive, stat, bundle, filename))
+                    // extract slic3r print config file
+                    if (!_extract_print_config_from_archive(archive, stat, bundle, filename))
                     {
                         mz_zip_reader_end(&archive);
-                        add_error("Archive does not contain a valid config");
+                        add_error("Archive does not contain a valid print config");
+                        return false;
+                    }
+                }
+                else if (boost::algorithm::iequals(name, MODEL_CONFIG_FILE))
+                {
+                    // extract slic3r model config file
+                    if (!_extract_model_config_from_archive(archive, stat, model))
+                    {
+                        mz_zip_reader_end(&archive);
+                        add_error("Archive does not contain a valid model config");
                         return false;
                     }
                 }
@@ -427,6 +514,67 @@ namespace Slic3r {
         }
 
         mz_zip_reader_end(&archive);
+
+        for (const IdToModelObjectMap::value_type& object : m_objects)
+        {
+            ObjectMetadata::VolumeMetadataList volumes;
+            ObjectMetadata::VolumeMetadataList* volumes_ptr = nullptr;
+
+            IdToGeometryMap::const_iterator obj_geometry = m_geometries.find(object.first);
+            if (obj_geometry == m_geometries.end())
+            {
+                add_error("Unable to find object geometry");
+                return false;
+            }
+
+            IdToMetadataMap::iterator obj_metadata = m_objects_metadata.find(object.first);
+            if (obj_metadata != m_objects_metadata.end())
+            {
+                // config data has been found, this model was saved using slic3r pe
+
+                // apply object's name and config data
+                for (const Metadata& metadata : obj_metadata->second.metadata)
+                {
+                    if (metadata.key == "name")
+                        object.second->name = metadata.value;
+                    else
+                        object.second->config.set_deserialize(metadata.key, metadata.value);
+                }
+
+                // select object's detected volumes
+                volumes_ptr = &obj_metadata->second.volumes;
+            }
+            else
+            {
+                // config data not found, this model was not saved using slic3r pe
+
+                // add the entire geometry as the single volume to generate
+                volumes.emplace_back(0, (int)obj_geometry->second.triangles.size() / 3 - 1);
+
+                // select as volumes
+                volumes_ptr = &volumes;
+            }
+
+            if (!_generate_volumes(*object.second, obj_geometry->second, *volumes_ptr))
+                return false;
+
+            // apply transformation if the object contains a single instance
+            if (object.second->instances.size() == 1)
+            {
+                for (const Instance& instance : m_instances)
+                {
+                    if (object.second->instances[0] == instance.instance)
+                    {
+                        _apply_transform(*object.second, instance.matrix);
+                        break;
+                    }
+                }
+            }
+        }
+
+        // fixes the min z of the model if negative
+        model.adjust_min_z();
+
         return true;
     }
 
@@ -448,7 +596,7 @@ namespace Slic3r {
         }
 
         XML_SetUserData(m_xml_parser, (void*)this);
-        XML_SetElementHandler(m_xml_parser, _3MF_Importer::_handle_start_xml_element, _3MF_Importer::_handle_end_xml_element);
+        XML_SetElementHandler(m_xml_parser, _3MF_Importer::_handle_start_model_xml_element, _3MF_Importer::_handle_end_model_xml_element);
 
         void* parser_buffer = XML_GetBuffer(m_xml_parser, (int)stat.m_uncomp_size);
         if (parser_buffer == nullptr)
@@ -475,7 +623,7 @@ namespace Slic3r {
         return true;
     }
 
-    bool _3MF_Importer::_extract_config_from_archive(mz_zip_archive& archive, const mz_zip_archive_file_stat& stat, PresetBundle& bundle, const std::string& archive_filename)
+    bool _3MF_Importer::_extract_print_config_from_archive(mz_zip_archive& archive, const mz_zip_archive_file_stat& stat, PresetBundle& bundle, const std::string& archive_filename)
     {
         if (stat.m_uncomp_size > 0)
         {
@@ -494,7 +642,52 @@ namespace Slic3r {
         return true;
     }
 
-    void _3MF_Importer::_handle_start_xml_element(const char* name, const char** attributes)
+    bool _3MF_Importer::_extract_model_config_from_archive(mz_zip_archive& archive, const mz_zip_archive_file_stat& stat, Model& model)
+    {
+        if (stat.m_uncomp_size == 0)
+        {
+            add_error("Found invalid size");
+            return false;
+        }
+
+        _destroy_xml_parser();
+
+        m_xml_parser = XML_ParserCreate(nullptr);
+        if (m_xml_parser == nullptr)
+        {
+            add_error("Unable to create parser");
+            return false;
+        }
+
+        XML_SetUserData(m_xml_parser, (void*)this);
+        XML_SetElementHandler(m_xml_parser, _3MF_Importer::_handle_start_config_xml_element, _3MF_Importer::_handle_end_config_xml_element);
+
+        void* parser_buffer = XML_GetBuffer(m_xml_parser, (int)stat.m_uncomp_size);
+        if (parser_buffer == nullptr)
+        {
+            add_error("Unable to create buffer");
+            return false;
+        }
+
+        mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, (size_t)stat.m_uncomp_size, 0);
+        if (res == 0)
+        {
+            add_error("Error while reading config data to buffer");
+            return false;
+        }
+
+        if (!XML_ParseBuffer(m_xml_parser, (int)stat.m_uncomp_size, 1))
+        {
+            char error_buf[1024];
+            ::sprintf(error_buf, "Error (%s) while parsing xml file at line %d", XML_ErrorString(XML_GetErrorCode(m_xml_parser)), XML_GetCurrentLineNumber(m_xml_parser));
+            add_error(error_buf);
+            return false;
+        }
+
+        return true;
+    }
+
+    void _3MF_Importer::_handle_start_model_xml_element(const char* name, const char** attributes)
     {
         if (m_xml_parser == nullptr)
             return;
@@ -531,7 +724,7 @@ namespace Slic3r {
             _stop_xml_parser();
     }
 
-    void _3MF_Importer::_handle_end_xml_element(const char* name)
+    void _3MF_Importer::_handle_end_model_xml_element(const char* name)
     {
         if (m_xml_parser == nullptr)
             return;
@@ -567,6 +760,47 @@ namespace Slic3r {
             _stop_xml_parser();
     }
 
+    void _3MF_Importer::_handle_start_config_xml_element(const char* name, const char** attributes)
+    {
+        if (m_xml_parser == nullptr)
+            return;
+
+        bool res = true;
+        unsigned int num_attributes = (unsigned int)XML_GetSpecifiedAttributeCount(m_xml_parser);
+
+        if (::strcmp(CONFIG_TAG, name) == 0)
+            res = _handle_start_config(attributes, num_attributes);
+        else if (::strcmp(OBJECT_TAG, name) == 0)
+            res = _handle_start_config_object(attributes, num_attributes);
+        else if (::strcmp(VOLUME_TAG, name) == 0)
+            res = _handle_start_config_volume(attributes, num_attributes);
+        else if (::strcmp(METADATA_TAG, name) == 0)
+            res = _handle_start_config_metadata(attributes, num_attributes);
+
+        if (!res)
+            _stop_xml_parser();
+    }
+
+    void _3MF_Importer::_handle_end_config_xml_element(const char* name)
+    {
+        if (m_xml_parser == nullptr)
+            return;
+
+        bool res = true;
+
+        if (::strcmp(CONFIG_TAG, name) == 0)
+            res = _handle_end_config();
+        else if (::strcmp(OBJECT_TAG, name) == 0)
+            res = _handle_end_config_object();
+        else if (::strcmp(VOLUME_TAG, name) == 0)
+            res = _handle_end_config_volume();
+        else if (::strcmp(METADATA_TAG, name) == 0)
+            res = _handle_end_config_metadata();
+
+        if (!res)
+            _stop_xml_parser();
+    }
+
     bool _3MF_Importer::_handle_start_model(const char** attributes, unsigned int num_attributes)
     {
         m_unit_factor = get_unit_factor(get_attribute_value_string(attributes, num_attributes, UNIT_ATTR));
@@ -588,18 +822,11 @@ namespace Slic3r {
             if (instance.instance != nullptr)
             {
                 ModelObject* object = instance.instance->get_object();
-                if (object != nullptr)
+                if ((object != nullptr) && (object->instances.size() > 1))
                 {
-                    if (object->instances.size() == 1)
-                    {
-                        // single instance -> apply the matrix to object geometry
-                        _apply_transform(*object, instance.matrix);
-                    }
-                    else
-                    {
-                        // multiple instances -> apply the matrix to the instance
-                        _apply_transform(*instance.instance, instance.matrix);
-                    }
+                    // multiple instances -> apply the matrix to the instance
+                    // (for single instance the transformation can be applied only after the volumes have been generated)
+                    _apply_transform(*instance.instance, instance.matrix);
                 }
             }
         }
@@ -669,30 +896,8 @@ namespace Slic3r {
             }
             else
             {
-                // geometry defined, add it to the object
-
-                ModelVolume* volume = m_curr_object.object->add_volume(m_curr_object.mesh);
-                if (volume == nullptr)
-                {
-                    add_error("Unable to add volume");
-                    return false;
-                }
-
-                stl_file& stl = volume->mesh.stl;
-                stl.stats.type = inmemory;
-                stl.stats.number_of_facets = (uint32_t)m_curr_object.geometry.triangles.size() / 3;
-                stl.stats.original_num_facets = (int)stl.stats.number_of_facets;
-                stl_allocate(&stl);
-                for (size_t i = 0; i < m_curr_object.geometry.triangles.size(); /*nothing*/)
-                {
-                    stl_facet& facet = stl.facet_start[i / 3];
-                    for (unsigned int v = 0; v < 3; ++v)
-                    {
-                        ::memcpy((void*)&facet.vertex[v].x, (const void*)&m_curr_object.geometry.vertices[m_curr_object.geometry.triangles[i++] * 3], 3 * sizeof(float));
-                    }
-                }
-                stl_get_size(&stl);
-                volume->mesh.repair();
+                // geometry defined, store it for later use
+                m_geometries.insert(IdToGeometryMap::value_type(m_curr_object.id, std::move(m_curr_object.geometry)));
 
                 // stores the object for later use
                 if (m_objects.find(m_curr_object.id) == m_objects.end())
@@ -1014,18 +1219,181 @@ namespace Slic3r {
         instance.rotation = angle_z;
     }
 
-    void XMLCALL _3MF_Importer::_handle_start_xml_element(void* userData, const char* name, const char** attributes)
+    bool _3MF_Importer::_handle_start_config(const char** attributes, unsigned int num_attributes)
     {
-        _3MF_Importer* importer = (_3MF_Importer*)userData;
-        if (importer != nullptr)
-            importer->_handle_start_xml_element(name, attributes);
+        // do nothing
+        return true;
     }
 
-    void XMLCALL _3MF_Importer::_handle_end_xml_element(void* userData, const char* name)
+    bool _3MF_Importer::_handle_end_config()
+    {
+        // do nothing
+        return true;
+    }
+
+    bool _3MF_Importer::_handle_start_config_object(const char** attributes, unsigned int num_attributes)
+    {
+        int object_id = get_attribute_value_int(attributes, num_attributes, ID_ATTR);
+        IdToMetadataMap::iterator object_item = m_objects_metadata.find(object_id);
+        if (object_item != m_objects_metadata.end())
+        {
+            add_error("Found duplicated object id");
+            return false;
+        }
+
+        m_objects_metadata.insert(IdToMetadataMap::value_type(object_id, ObjectMetadata()));
+        m_curr_config.object_id = object_id;
+        return true;
+    }
+
+    bool _3MF_Importer::_handle_end_config_object()
+    {
+        // do nothing
+        return true;
+    }
+
+    bool _3MF_Importer::_handle_start_config_volume(const char** attributes, unsigned int num_attributes)
+    {
+        IdToMetadataMap::iterator object = m_objects_metadata.find(m_curr_config.object_id);
+        if (object == m_objects_metadata.end())
+        {
+            add_error("Cannot assign volume to a valid object");
+            return false;
+        }
+
+        m_curr_config.volume_id = object->second.volumes.size();
+
+        unsigned int first_triangle_id = (unsigned int)get_attribute_value_int(attributes, num_attributes, FIRST_TRIANGLE_ID_ATTR);
+        unsigned int last_triangle_id = (unsigned int)get_attribute_value_int(attributes, num_attributes, LAST_TRIANGLE_ID_ATTR);
+
+        object->second.volumes.emplace_back(first_triangle_id, last_triangle_id);
+        return true;
+    }
+
+    bool _3MF_Importer::_handle_end_config_volume()
+    {
+        // do nothing
+        return true;
+    }
+
+    bool _3MF_Importer::_handle_start_config_metadata(const char** attributes, unsigned int num_attributes)
+    {
+        IdToMetadataMap::iterator object = m_objects_metadata.find(m_curr_config.object_id);
+        if (object == m_objects_metadata.end())
+        {
+            add_error("Cannot assign metadata to valid object id");
+            return false;
+        }
+
+        std::string type = get_attribute_value_string(attributes, num_attributes, TYPE_ATTR);
+        std::string key = get_attribute_value_string(attributes, num_attributes, KEY_ATTR);
+        std::string value = get_attribute_value_string(attributes, num_attributes, VALUE_ATTR);
+
+        if (type == OBJECT_TYPE)
+            object->second.metadata.emplace_back(key, value);
+        else if (type == VOLUME_TYPE)
+        {
+            if (m_curr_config.volume_id < object->second.volumes.size())
+                object->second.volumes[m_curr_config.volume_id].metadata.emplace_back(key, value);
+        }
+        else
+        {
+            add_error("Found invalid metadata type");
+            return false;
+        }
+
+        return true;
+    }
+
+    bool _3MF_Importer::_handle_end_config_metadata()
+    {
+        // do nothing
+        return true;
+    }
+
+    bool _3MF_Importer::_generate_volumes(ModelObject& object, const Geometry& geometry, const ObjectMetadata::VolumeMetadataList& volumes)
+    {
+        if (!object.volumes.empty())
+        {
+            add_error("Found invalid volumes count");
+            return false;
+        }
+
+        unsigned int geo_tri_count = geometry.triangles.size() / 3;
+
+        for (const ObjectMetadata::VolumeMetadata& volume_data : volumes)
+        {
+            if ((geo_tri_count <= volume_data.first_triangle_id) || (geo_tri_count <= volume_data.last_triangle_id) || (volume_data.last_triangle_id < volume_data.first_triangle_id))
+            {
+                add_error("Found invalid triangle id");
+                return false;
+            }
+
+            // splits volume out of imported geometry
+            unsigned int triangles_count = volume_data.last_triangle_id - volume_data.first_triangle_id + 1;
+            ModelVolume* volume = object.add_volume(TriangleMesh());
+            stl_file& stl = volume->mesh.stl;
+            stl.stats.type = inmemory;
+            stl.stats.number_of_facets = (uint32_t)triangles_count;
+            stl.stats.original_num_facets = (int)stl.stats.number_of_facets;
+            stl_allocate(&stl);
+
+            unsigned int src_start_id = volume_data.first_triangle_id * 3;
+
+            for (size_t i = 0; i < triangles_count; ++i)
+            {
+                unsigned int ii = i * 3;
+                stl_facet& facet = stl.facet_start[i];
+                for (unsigned int v = 0; v < 3; ++v)
+                {
+                    ::memcpy((void*)&facet.vertex[v].x, (const void*)&geometry.vertices[geometry.triangles[src_start_id + ii + v] * 3], 3 * sizeof(float));
+                }
+            }
+
+            stl_get_size(&stl);
+            volume->mesh.repair();
+
+            // apply volume's name and config data
+            for (const Metadata& metadata : volume_data.metadata)
+            {
+                if (metadata.key == NAME_KEY)
+                    volume->name = metadata.value;
+                else if ((metadata.key == MODIFIER_KEY) && (metadata.value == "1"))
+                    volume->modifier = true;
+                else
+                    volume->config.set_deserialize(metadata.key, metadata.value);
+            }
+        }
+
+        return true;
+    }
+
+    void XMLCALL _3MF_Importer::_handle_start_model_xml_element(void* userData, const char* name, const char** attributes)
     {
         _3MF_Importer* importer = (_3MF_Importer*)userData;
         if (importer != nullptr)
-            importer->_handle_end_xml_element(name);
+            importer->_handle_start_model_xml_element(name, attributes);
+    }
+
+    void XMLCALL _3MF_Importer::_handle_end_model_xml_element(void* userData, const char* name)
+    {
+        _3MF_Importer* importer = (_3MF_Importer*)userData;
+        if (importer != nullptr)
+            importer->_handle_end_model_xml_element(name);
+    }
+
+    void XMLCALL _3MF_Importer::_handle_start_config_xml_element(void* userData, const char* name, const char** attributes)
+    {
+        _3MF_Importer* importer = (_3MF_Importer*)userData;
+        if (importer != nullptr)
+            importer->_handle_start_config_xml_element(name, attributes);
+    }
+    
+    void XMLCALL _3MF_Importer::_handle_end_config_xml_element(void* userData, const char* name)
+    {
+        _3MF_Importer* importer = (_3MF_Importer*)userData;
+        if (importer != nullptr)
+            importer->_handle_end_config_xml_element(name);
     }
 
     class _3MF_Exporter : public _3MF_Base
@@ -1035,10 +1403,44 @@ namespace Slic3r {
             unsigned int id;
             Matrix4x4 matrix;
 
-            BuildItem(unsigned int id, const Matrix4x4& matrix);
+            BuildItem(unsigned int id, const Matrix4x4& matrix)
+                : id(id)
+                , matrix(matrix)
+            {
+            }
+        };
+
+        struct Offsets
+        {
+            unsigned int first_vertex_id;
+            unsigned int first_triangle_id;
+            unsigned int last_triangle_id;
+
+            Offsets(unsigned int first_vertex_id)
+                : first_vertex_id(first_vertex_id)
+                , first_triangle_id(-1)
+                , last_triangle_id(-1)
+            {
+            }
+        };
+
+        typedef std::map<const ModelVolume*, Offsets> VolumeToOffsetsMap;
+
+        struct ObjectData
+        {
+            ModelObject* object;
+            VolumeToOffsetsMap volumes_offsets;
+
+            explicit ObjectData(ModelObject* object)
+                : object(object)
+            {
+            }
         };
 
         typedef std::vector<BuildItem> BuildItemsList;
+        typedef std::map<int, ObjectData> IdToObjectDataMap;
+
+        IdToObjectDataMap m_objects_data;
 
     public:
         bool save_model_to_file(const std::string& filename, Model& model, const Print& print);
@@ -1048,18 +1450,13 @@ namespace Slic3r {
         bool _add_content_types_file_to_archive(mz_zip_archive& archive);
         bool _add_relationships_file_to_archive(mz_zip_archive& archive);
         bool _add_model_file_to_archive(mz_zip_archive& archive, Model& model);
-        bool _add_object_to_model_stream(std::stringstream& stream, unsigned int& object_id, ModelObject& object, BuildItemsList& build_items);
-        bool _add_mesh_to_object_stream(std::stringstream& stream, ModelObject& object);
+        bool _add_object_to_model_stream(std::stringstream& stream, unsigned int& object_id, ModelObject& object, BuildItemsList& build_items, VolumeToOffsetsMap& volumes_offsets);
+        bool _add_mesh_to_object_stream(std::stringstream& stream, ModelObject& object, VolumeToOffsetsMap& volumes_offsets);
         bool _add_build_to_model_stream(std::stringstream& stream, const BuildItemsList& build_items);
-        bool _add_config_file_to_archive(mz_zip_archive& archive, const Print& print);
+        bool _add_print_config_file_to_archive(mz_zip_archive& archive, const Print& print);
+        bool _add_model_config_file_to_archive(mz_zip_archive& archive, const Model& model);
     };
 
-    _3MF_Exporter::BuildItem::BuildItem(unsigned int id, const Matrix4x4& matrix)
-        : id(id)
-        , matrix(matrix)
-    {
-    }
-
     bool _3MF_Exporter::save_model_to_file(const std::string& filename, Model& model, const Print& print)
     {
         clear_errors();
@@ -1071,6 +1468,8 @@ namespace Slic3r {
         mz_zip_archive archive;
         mz_zip_zero_struct(&archive);
 
+        m_objects_data.clear();
+
         mz_bool res = mz_zip_writer_init_file(&archive, filename.c_str(), 0);
         if (res == 0)
         {
@@ -1102,8 +1501,16 @@ namespace Slic3r {
             return false;
         }
 
-        // adds slic3r config file
-        if (!_add_config_file_to_archive(archive, print))
+        // adds slic3r print config file
+        if (!_add_print_config_file_to_archive(archive, print))
+        {
+            mz_zip_writer_end(&archive);
+            boost::filesystem::remove(filename);
+            return false;
+        }
+
+        // adds slic3r model config file
+        if (!_add_model_config_file_to_archive(archive, model))
         {
             mz_zip_writer_end(&archive);
             boost::filesystem::remove(filename);
@@ -1166,8 +1573,8 @@ namespace Slic3r {
     {
         std::stringstream stream;
         stream << "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n";
-        stream << "<model unit=\"millimeter\" xml:lang=\"en-US\" xmlns=\"http://schemas.microsoft.com/3dmanufacturing/core/2015/02\">\n";
-        stream << " <resources>\n";
+        stream << "<" << MODEL_TAG << " unit=\"millimeter\" xml:lang=\"en-US\" xmlns=\"http://schemas.microsoft.com/3dmanufacturing/core/2015/02\">\n";
+        stream << " <" << RESOURCES_TAG << ">\n";
 
         BuildItemsList build_items;
 
@@ -1177,15 +1584,17 @@ namespace Slic3r {
             if (obj == nullptr)
                 continue;
 
-            if (!_add_object_to_model_stream(stream, object_id, *obj, build_items))
+            unsigned int curr_id = object_id;
+            IdToObjectDataMap::iterator object_it = m_objects_data.insert(IdToObjectDataMap::value_type(curr_id, ObjectData(obj))).first;
+
+            if (!_add_object_to_model_stream(stream, object_id, *obj, build_items, object_it->second.volumes_offsets))
             {
                 add_error("Unable to add object to archive");
                 return false;
             }
         }
 
-
-        stream << " </resources>\n";
+        stream << " </" << RESOURCES_TAG << ">\n";
 
         if (!_add_build_to_model_stream(stream, build_items))
         {
@@ -1193,7 +1602,7 @@ namespace Slic3r {
             return false;
         }
 
-        stream << "</model>\n";
+        stream << "</" << MODEL_TAG << ">\n";
 
         std::string out = stream.str();
 
@@ -1206,7 +1615,7 @@ namespace Slic3r {
         return true;
     }
 
-    bool _3MF_Exporter::_add_object_to_model_stream(std::stringstream& stream, unsigned int& object_id, ModelObject& object, BuildItemsList& build_items)
+    bool _3MF_Exporter::_add_object_to_model_stream(std::stringstream& stream, unsigned int& object_id, ModelObject& object, BuildItemsList& build_items, VolumeToOffsetsMap& volumes_offsets)
     {
         unsigned int id = 0;
         for (const ModelInstance* instance : object.instances)
@@ -1215,11 +1624,11 @@ namespace Slic3r {
                 continue;
 
             unsigned int instance_id = object_id + id;
-            stream << "  <object id=\"" << instance_id << "\" type=\"model\">\n";
+            stream << "  <" << OBJECT_TAG << " id=\"" << instance_id << "\" type=\"model\">\n";
 
             if (id == 0)
             {
-                if (!_add_mesh_to_object_stream(stream, object))
+                if (!_add_mesh_to_object_stream(stream, object, volumes_offsets))
                 {
                     add_error("Unable to add mesh to archive");
                     return false;
@@ -1227,9 +1636,9 @@ namespace Slic3r {
             }
             else
             {
-                stream << "   <components>\n";
-                stream << "    <component objectid=\"" << object_id << "\" />\n";
-                stream << "   </components>\n";
+                stream << "   <" << COMPONENTS_TAG << ">\n";
+                stream << "    <" << COMPONENT_TAG << " objectid=\"" << object_id << "\" />\n";
+                stream << "   </" << COMPONENTS_TAG << ">\n";
             }
 
             Eigen::Affine3f transform;
@@ -1238,7 +1647,7 @@ namespace Slic3r {
                         * Eigen::Scaling((float)instance->scaling_factor);
             build_items.emplace_back(instance_id, transform.matrix());
 
-            stream << "  </object>\n";
+            stream << "  </" << OBJECT_TAG << ">\n";
 
             ++id;
         }
@@ -1247,20 +1656,18 @@ namespace Slic3r {
         return true;
     }
 
-    bool _3MF_Exporter::_add_mesh_to_object_stream(std::stringstream& stream, ModelObject& object)
+    bool _3MF_Exporter::_add_mesh_to_object_stream(std::stringstream& stream, ModelObject& object, VolumeToOffsetsMap& volumes_offsets)
     {
-        stream << "   <mesh>\n";
-        stream << "    <vertices>\n";
+        stream << "   <" << MESH_TAG << ">\n";
+        stream << "    <" << VERTICES_TAG << ">\n";
 
-        typedef std::map<ModelVolume*, unsigned int> VolumeToOffsetMap; 
-        VolumeToOffsetMap volumes_offset;
         unsigned int vertices_count = 0;
         for (ModelVolume* volume : object.volumes)
         {
             if (volume == nullptr)
                 continue;
 
-            volumes_offset.insert(VolumeToOffsetMap::value_type(volume, vertices_count));
+            VolumeToOffsetsMap::iterator volume_it = volumes_offsets.insert(VolumeToOffsetsMap::value_type(volume, Offsets(vertices_count))).first;
 
             if (!volume->mesh.repaired)
                 volume->mesh.repair();
@@ -1279,7 +1686,7 @@ namespace Slic3r {
 
             for (int i = 0; i < stl.stats.shared_vertices; ++i)
             {
-                stream << "     <vertex ";
+                stream << "     <" << VERTEX_TAG << " ";
                 // Subtract origin_translation in order to restore the original local coordinates
                 stream << "x=\"" << (stl.v_shared[i].x - object.origin_translation.x) << "\" ";
                 stream << "y=\"" << (stl.v_shared[i].y - object.origin_translation.y) << "\" ";
@@ -1287,33 +1694,38 @@ namespace Slic3r {
             }
         }
 
-        stream << "    </vertices>\n";
-        stream << "    <triangles>\n";
+        stream << "    </" << VERTICES_TAG << ">\n";
+        stream << "    <" << TRIANGLES_TAG << ">\n";
 
+        unsigned int triangles_count = 0;
         for (ModelVolume* volume : object.volumes)
         {
             if (volume == nullptr)
                 continue;
 
-            VolumeToOffsetMap::const_iterator offset_it = volumes_offset.find(volume);
-            assert(offset_it != volumes_offset.end());
+            VolumeToOffsetsMap::iterator volume_it = volumes_offsets.find(volume);
+            assert(volume_it != volumes_offsets.end());
 
             stl_file& stl = volume->mesh.stl;
 
+            // updates triangle offsets
+            volume_it->second.first_triangle_id = triangles_count;
+            triangles_count += stl.stats.number_of_facets;
+            volume_it->second.last_triangle_id = triangles_count - 1;
+
             for (uint32_t i = 0; i < stl.stats.number_of_facets; ++i)
             {
-                stream << "     <triangle ";
+                stream << "     <" << TRIANGLE_TAG << " ";
                 for (int j = 0; j < 3; ++j)
                 {
-                    stream << "v" << j + 1 << "=\"" << stl.v_indices[i].vertex[j] + offset_it->second << "\" ";
+                    stream << "v" << j + 1 << "=\"" << stl.v_indices[i].vertex[j] + volume_it->second.first_vertex_id << "\" ";
                 }
                 stream << "/>\n";
             }
-
         }
 
-        stream << "    </triangles>\n";
-        stream << "   </mesh>\n";
+        stream << "    </" << TRIANGLES_TAG << ">\n";
+        stream << "   </" << MESH_TAG << ">\n";
 
         return true;
     }
@@ -1326,11 +1738,11 @@ namespace Slic3r {
             return false;
         }
 
-        stream << " <build>\n";
+        stream << " <" << BUILD_TAG << ">\n";
 
         for (const BuildItem& item : build_items)
         {
-            stream << "  <item objectid=\"" << item.id << "\" transform =\"";
+            stream << "  <" << ITEM_TAG << " objectid=\"" << item.id << "\" transform =\"";
             for (unsigned c = 0; c < 4; ++c)
             {
                 for (unsigned r = 0; r < 3; ++r)
@@ -1343,12 +1755,12 @@ namespace Slic3r {
             stream << "\" />\n";
         }
 
-        stream << " </build>\n";
+        stream << " </" << BUILD_TAG << ">\n";
 
         return true;
     }
 
-    bool _3MF_Exporter::_add_config_file_to_archive(mz_zip_archive& archive, const Print& print)
+    bool _3MF_Exporter::_add_print_config_file_to_archive(mz_zip_archive& archive, const Print& print)
     {
         char buffer[1024];
         sprintf(buffer, "; %s\n\n", header_slic3r_generated().c_str());
@@ -1356,9 +1768,81 @@ namespace Slic3r {
 
         GCode::append_full_config(print, out);
 
-        if (!mz_zip_writer_add_mem(&archive, CONFIG_FILE.c_str(), (const void*)out.data(), out.length(), MZ_DEFAULT_COMPRESSION))
+        if (!mz_zip_writer_add_mem(&archive, PRINT_CONFIG_FILE.c_str(), (const void*)out.data(), out.length(), MZ_DEFAULT_COMPRESSION))
         {
-            add_error("Unable to add config file to archive");
+            add_error("Unable to add print config file to archive");
+            return false;
+        }
+
+        return true;
+    }
+
+    bool _3MF_Exporter::_add_model_config_file_to_archive(mz_zip_archive& archive, const Model& model)
+    {
+        std::stringstream stream;
+        stream << "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n";
+        stream << "<" << CONFIG_TAG << ">\n";
+
+        for (const IdToObjectDataMap::value_type& obj_metadata : m_objects_data)
+        {
+            const ModelObject* obj = obj_metadata.second.object;
+            if (obj != nullptr)
+            {
+                stream << " <" << OBJECT_TAG << " id=\"" << obj_metadata.first << "\">\n";
+
+                // stores object's name
+                if (!obj->name.empty())
+                    stream << "  <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << OBJECT_TYPE << "\" " << KEY_ATTR << "=\"name\" " << VALUE_ATTR << "=\"" << obj->name << "\"/>\n";
+
+                // stores object's config data
+                for (const std::string& key : obj->config.keys())
+                {
+                    stream << "  <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << OBJECT_TYPE << "\" " << KEY_ATTR << "=\"" << key << "\" " << VALUE_ATTR << "=\"" << obj->config.serialize(key) << "\"/>\n";
+                }
+
+                for (const ModelVolume* volume : obj_metadata.second.object->volumes)
+                {
+                    if (volume != nullptr)
+                    {
+                        const VolumeToOffsetsMap& offsets = obj_metadata.second.volumes_offsets;
+                        VolumeToOffsetsMap::const_iterator it = offsets.find(volume);
+                        if (it != offsets.end())
+                        {
+                            // stores volume's offsets
+                            stream << "  <" << VOLUME_TAG << " ";
+                            stream << FIRST_TRIANGLE_ID_ATTR << "=\"" << it->second.first_triangle_id << "\" ";
+                            stream << LAST_TRIANGLE_ID_ATTR << "=\"" << it->second.last_triangle_id << "\">\n";
+
+                            // stores volume's name
+                            if (!volume->name.empty())
+                                stream << "   <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << VOLUME_TYPE << "\" " << KEY_ATTR << "=\"" << NAME_KEY << "\" " << VALUE_ATTR << "=\"" << volume->name << "\"/>\n";
+
+                            // stores volume's modifier field
+                            if (volume->modifier)
+                                stream << "   <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << VOLUME_TYPE << "\" " << KEY_ATTR << "=\"" << MODIFIER_KEY << "\" " << VALUE_ATTR << "=\"1\"/>\n";
+
+                            // stores volume's config data
+                            for (const std::string& key : volume->config.keys())
+                            {
+                                stream << "   <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << VOLUME_TYPE << "\" " << KEY_ATTR << "=\"" << key << "\" " << VALUE_ATTR << "=\"" << volume->config.serialize(key) << "\"/>\n";
+                            }
+
+                            stream << "  </" << VOLUME_TAG << ">\n";
+                        }
+                    }
+                }
+
+                stream << " </" << OBJECT_TAG << ">\n";
+            }
+        }
+
+        stream << "</" << CONFIG_TAG << ">\n";
+
+        std::string out = stream.str();
+
+        if (!mz_zip_writer_add_mem(&archive, MODEL_CONFIG_FILE.c_str(), (const void*)out.data(), out.length(), MZ_DEFAULT_COMPRESSION))
+        {
+            add_error("Unable to add model config file to archive");
             return false;
         }
 
@@ -1392,5 +1876,4 @@ namespace Slic3r {
 
         return res;
     }
-
 } // namespace Slic3r
diff --git a/xs/src/libslic3r/Model.cpp b/xs/src/libslic3r/Model.cpp
index 1de99bbf8..6f1ce1ce5 100644
--- a/xs/src/libslic3r/Model.cpp
+++ b/xs/src/libslic3r/Model.cpp
@@ -222,7 +222,7 @@ bool Model::add_default_instances()
 }
 
 // this returns the bounding box of the *transformed* instances
-BoundingBoxf3 Model::bounding_box()
+BoundingBoxf3 Model::bounding_box() const
 {
     BoundingBoxf3 bb;
     for (ModelObject *o : this->objects)
@@ -230,6 +230,14 @@ BoundingBoxf3 Model::bounding_box()
     return bb;
 }
 
+BoundingBoxf3 Model::transformed_bounding_box() const
+{
+    BoundingBoxf3 bb;
+    for (const ModelObject* obj : this->objects)
+        bb.merge(obj->tight_bounding_box(false));
+    return bb;
+}
+
 void Model::center_instances_around_point(const Pointf &point)
 {
 //    BoundingBoxf3 bb = this->bounding_box();
@@ -409,6 +417,51 @@ void Model::convert_multipart_object()
     this->objects.push_back(object);
 }
 
+void Model::adjust_min_z()
+{
+    if (objects.empty())
+        return;
+
+    if (bounding_box().min.z < 0.0)
+    {
+        for (ModelObject* obj : objects)
+        {
+            if (obj != nullptr)
+            {
+                coordf_t obj_min_z = obj->bounding_box().min.z;
+                if (obj_min_z < 0.0)
+                    obj->translate(0.0, 0.0, -obj_min_z);
+            }
+        }
+    }
+}
+
+bool Model::fits_print_volume(const DynamicPrintConfig* config) const
+{
+    if (config == nullptr)
+        return false;
+
+    if (objects.empty())
+        return true;
+
+    const ConfigOptionPoints* opt = dynamic_cast<const ConfigOptionPoints*>(config->option("bed_shape"));
+    if (opt == nullptr)
+        return false;
+
+    BoundingBox bed_box_2D = get_extents(Polygon::new_scale(opt->values));
+    BoundingBoxf3 print_volume(Pointf3(unscale(bed_box_2D.min.x), unscale(bed_box_2D.min.y), 0.0), Pointf3(unscale(bed_box_2D.max.x), unscale(bed_box_2D.max.y), config->opt_float("max_print_height")));
+    return print_volume.contains(transformed_bounding_box());
+}
+
+bool Model::fits_print_volume(const FullPrintConfig &config) const
+{
+    if (objects.empty())
+        return true;
+    BoundingBox bed_box_2D = get_extents(Polygon::new_scale(config.bed_shape.values));
+    BoundingBoxf3 print_volume(Pointf3(unscale(bed_box_2D.min.x), unscale(bed_box_2D.min.y), 0.0), Pointf3(unscale(bed_box_2D.max.x), unscale(bed_box_2D.max.y), config.max_print_height));
+    return print_volume.contains(transformed_bounding_box());
+}
+
 ModelObject::ModelObject(Model *model, const ModelObject &other, bool copy_volumes) :  
     name(other.name),
     input_file(other.input_file),
@@ -539,7 +592,7 @@ void ModelObject::clear_instances()
 
 // Returns the bounding box of the transformed instances.
 // This bounding box is approximate and not snug.
-BoundingBoxf3 ModelObject::bounding_box()
+const BoundingBoxf3& ModelObject::bounding_box()
 {
     if (! m_bounding_box_valid) {
         BoundingBoxf3 raw_bbox;
@@ -555,6 +608,54 @@ BoundingBoxf3 ModelObject::bounding_box()
     return m_bounding_box;
 }
 
+BoundingBoxf3 ModelObject::tight_bounding_box(bool include_modifiers) const
+{
+    BoundingBoxf3 bb;
+
+    for (const ModelVolume* vol : this->volumes)
+    {
+        if (include_modifiers || !vol->modifier)
+        {
+            for (const ModelInstance* inst : this->instances)
+            {
+                double c = cos(inst->rotation);
+                double s = sin(inst->rotation);
+
+                for (int f = 0; f < vol->mesh.stl.stats.number_of_facets; ++f)
+                {
+                    const stl_facet& facet = vol->mesh.stl.facet_start[f];
+
+                    for (int i = 0; i < 3; ++i)
+                    {
+                        // original point
+                        const stl_vertex& v = facet.vertex[i];
+                        Pointf3 p((double)v.x, (double)v.y, (double)v.z);
+
+                        // scale
+                        p.x *= inst->scaling_factor;
+                        p.y *= inst->scaling_factor;
+                        p.z *= inst->scaling_factor;
+
+                        // rotate Z
+                        double x = p.x;
+                        double y = p.y;
+                        p.x = c * x - s * y;
+                        p.y = s * x + c * y;
+
+                        // translate
+                        p.x += inst->offset.x;
+                        p.y += inst->offset.y;
+
+                        bb.merge(p);
+                    }
+                }
+            }
+        }
+    }
+
+    return bb;
+}
+
 // A mesh containing all transformed instances of this object.
 TriangleMesh ModelObject::mesh() const
 {
@@ -671,7 +772,7 @@ void ModelObject::transform(const float* matrix3x4)
         v->mesh.transform(matrix3x4);
     }
 
-    origin_translation = Pointf3(0.0f, 0.0f, 0.0f);
+    origin_translation = Pointf3(0.0, 0.0, 0.0);
     invalidate_bounding_box();
 }
 
diff --git a/xs/src/libslic3r/Model.hpp b/xs/src/libslic3r/Model.hpp
index cf9bfd85a..bf7f60e36 100644
--- a/xs/src/libslic3r/Model.hpp
+++ b/xs/src/libslic3r/Model.hpp
@@ -102,8 +102,12 @@ public:
 
     // Returns the bounding box of the transformed instances.
     // This bounding box is approximate and not snug.
-    BoundingBoxf3 bounding_box();
+    // This bounding box is being cached.
+    const BoundingBoxf3& bounding_box();
     void invalidate_bounding_box() { m_bounding_box_valid = false; }
+    // Returns a snug bounding box of the transformed instances.
+    // This bounding box is not being cached.
+    BoundingBoxf3 tight_bounding_box(bool include_modifiers) const;
 
     // A mesh containing all transformed instances of this object.
     TriangleMesh mesh() const;
@@ -260,7 +264,10 @@ public:
     void delete_material(t_model_material_id material_id);
     void clear_materials();
     bool add_default_instances();
-    BoundingBoxf3 bounding_box();
+    // Returns approximate axis aligned bounding box of this model
+    BoundingBoxf3 bounding_box() const;
+    // Returns tight axis aligned bounding box of this model
+    BoundingBoxf3 transformed_bounding_box() const;
     void center_instances_around_point(const Pointf &point);
     void translate(coordf_t x, coordf_t y, coordf_t z) { for (ModelObject *o : this->objects) o->translate(x, y, z); }
     TriangleMesh mesh() const;
@@ -273,6 +280,13 @@ public:
     bool looks_like_multipart_object() const;
     void convert_multipart_object();
 
+    // Ensures that the min z of the model is not negative
+    void adjust_min_z();
+
+    // Returs true if this model is contained into the print volume defined inside the given config
+    bool fits_print_volume(const DynamicPrintConfig* config) const;
+    bool fits_print_volume(const FullPrintConfig &config) const;
+
     void print_info() const { for (const ModelObject *o : this->objects) o->print_info(); }
 };
 
diff --git a/xs/src/libslic3r/Print.cpp b/xs/src/libslic3r/Print.cpp
index 6a804c10d..a126d84b7 100644
--- a/xs/src/libslic3r/Print.cpp
+++ b/xs/src/libslic3r/Print.cpp
@@ -122,6 +122,7 @@ bool Print::invalidate_state_by_config_options(const std::vector<t_config_option
         "layer_gcode",
         "min_fan_speed",
         "max_fan_speed",
+        "max_print_height",
         "min_print_speed",
         "max_print_speed",
         "max_volumetric_speed",
@@ -518,6 +519,15 @@ bool Print::has_skirt() const
 
 std::string Print::validate() const
 {
+    BoundingBox bed_box_2D = get_extents(Polygon::new_scale(config.bed_shape.values));
+    BoundingBoxf3 print_volume(Pointf3(unscale(bed_box_2D.min.x), unscale(bed_box_2D.min.y), 0.0), Pointf3(unscale(bed_box_2D.max.x), unscale(bed_box_2D.max.y), config.max_print_height));
+    // Allow the objects to protrude below the print bed, only the part of the object above the print bed will be sliced.
+    print_volume.min.z = -1e10;
+    for (PrintObject *po : this->objects) {
+        if (! print_volume.contains(po->model_object()->tight_bounding_box(false)))
+            return "Some objects are outside of the print volume.";
+    }
+
     if (this->config.complete_objects) {
         // Check horizontal clearance.
         {
diff --git a/xs/src/libslic3r/PrintConfig.cpp b/xs/src/libslic3r/PrintConfig.cpp
index 6d40b8582..a09b896c9 100644
--- a/xs/src/libslic3r/PrintConfig.cpp
+++ b/xs/src/libslic3r/PrintConfig.cpp
@@ -862,6 +862,13 @@ PrintConfigDef::PrintConfigDef()
     def->min = 0;
     def->default_value = new ConfigOptionFloats { 0. };
 
+    def = this->add("max_print_height", coFloat);
+    def->label = L("Max print height");
+    def->tooltip = L("Set this to the maximum height that can be reached by your extruder while printing.");
+    def->sidetext = L("mm");
+    def->cli = "max-print-height=f";
+    def->default_value = new ConfigOptionFloat(200.0);
+
     def = this->add("max_print_speed", coFloat);
     def->label = L("Max print speed");
     def->tooltip = L("When setting other speed settings to 0 Slic3r will autocalculate the optimal speed "
@@ -1588,12 +1595,10 @@ PrintConfigDef::PrintConfigDef()
     def->enum_values.push_back("rectilinear");
     def->enum_values.push_back("rectilinear-grid");
     def->enum_values.push_back("honeycomb");
-    def->enum_values.push_back("pillars");
     def->enum_labels.push_back("rectilinear");
     def->enum_labels.push_back("rectilinear grid");
     def->enum_labels.push_back("honeycomb");
-    def->enum_labels.push_back("pillars");
-    def->default_value = new ConfigOptionEnum<SupportMaterialPattern>(smpPillars);
+    def->default_value = new ConfigOptionEnum<SupportMaterialPattern>(smpRectilinear);
 
     def = this->add("support_material_spacing", coFloat);
     def->label = L("Pattern spacing");
@@ -1905,6 +1910,9 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va
             values is a dirty hack and will need to be removed sometime in the future, but it
             will avoid lots of complaints for now. */
         value = "0";
+    } else if (opt_key == "support_material_pattern" && value == "pillars") {
+        // Slic3r PE does not support the pillars. They never worked well.
+        value = "rectilinear";
     } else if (opt_key == "support_material_threshold" && value == "0") {
         // 0 used to be automatic threshold, but we introduced percent values so let's
         // transform it into the default value
diff --git a/xs/src/libslic3r/PrintConfig.hpp b/xs/src/libslic3r/PrintConfig.hpp
index af0c814e1..3488b5c4f 100644
--- a/xs/src/libslic3r/PrintConfig.hpp
+++ b/xs/src/libslic3r/PrintConfig.hpp
@@ -33,7 +33,7 @@ enum InfillPattern {
 };
 
 enum SupportMaterialPattern {
-    smpRectilinear, smpRectilinearGrid, smpHoneycomb, smpPillars,
+    smpRectilinear, smpRectilinearGrid, smpHoneycomb,
 };
 
 enum SeamPosition {
@@ -87,7 +87,6 @@ template<> inline t_config_enum_values& ConfigOptionEnum<SupportMaterialPattern>
         keys_map["rectilinear"]         = smpRectilinear;
         keys_map["rectilinear-grid"]    = smpRectilinearGrid;
         keys_map["honeycomb"]           = smpHoneycomb;
-        keys_map["pillars"]             = smpPillars;
     }
     return keys_map;
 }
@@ -600,6 +599,7 @@ public:
     ConfigOptionFloats              max_layer_height;
     ConfigOptionInts                min_fan_speed;
     ConfigOptionFloats              min_layer_height;
+    ConfigOptionFloat               max_print_height;
     ConfigOptionFloats              min_print_speed;
     ConfigOptionFloat               min_skirt_length;
     ConfigOptionString              notes;
@@ -667,6 +667,7 @@ protected:
         OPT_PTR(max_layer_height);
         OPT_PTR(min_fan_speed);
         OPT_PTR(min_layer_height);
+        OPT_PTR(max_print_height);
         OPT_PTR(min_print_speed);
         OPT_PTR(min_skirt_length);
         OPT_PTR(notes);
diff --git a/xs/src/libslic3r/SupportMaterial.cpp b/xs/src/libslic3r/SupportMaterial.cpp
index b8df67ba6..0cecf0014 100644
--- a/xs/src/libslic3r/SupportMaterial.cpp
+++ b/xs/src/libslic3r/SupportMaterial.cpp
@@ -2491,7 +2491,6 @@ void PrintObjectSupportMaterial::generate_toolpaths(
         infill_pattern = ipRectilinear;
         break;
     case smpHoneycomb:
-    case smpPillars:
         infill_pattern = ipHoneycomb;
         break;
     }
diff --git a/xs/src/libslic3r/TriangleMesh.cpp b/xs/src/libslic3r/TriangleMesh.cpp
index ffbe507ef..aecb39662 100644
--- a/xs/src/libslic3r/TriangleMesh.cpp
+++ b/xs/src/libslic3r/TriangleMesh.cpp
@@ -987,101 +987,227 @@ void TriangleMeshSlicer::make_loops(std::vector<IntersectionLine> &lines, Polygo
                     }
                 }
         }
-    
-    // Build a map of lines by edge_a_id and a_id.
-    std::vector<IntersectionLine*> by_edge_a_id;
-    std::vector<IntersectionLine*> by_a_id;
-    by_edge_a_id.reserve(lines.size());
-    by_a_id.reserve(lines.size());
-    for (IntersectionLines::iterator line = lines.begin(); line != lines.end(); ++ line) {
-        if (! line->skip) {
-            if (line->edge_a_id != -1)
-                by_edge_a_id.push_back(&(*line)); // [line->edge_a_id].push_back();
-            if (line->a_id != -1) 
-                by_a_id.push_back(&(*line)); // [line->a_id].push_back(&(*line));
+
+    struct OpenPolyline {
+        OpenPolyline() {};
+        OpenPolyline(const IntersectionReference &start, const IntersectionReference &end, Points &&points) : 
+            start(start), end(end), points(std::move(points)), consumed(false) {}
+        void reverse() {
+            std::swap(start, end);
+            std::reverse(points.begin(), points.end());
+        }
+        IntersectionReference   start;
+        IntersectionReference   end;
+        Points                  points;
+        bool                    consumed;
+    };
+    std::vector<OpenPolyline> open_polylines;
+    {
+        // Build a map of lines by edge_a_id and a_id.
+        std::vector<IntersectionLine*> by_edge_a_id;
+        std::vector<IntersectionLine*> by_a_id;
+        by_edge_a_id.reserve(lines.size());
+        by_a_id.reserve(lines.size());
+        for (IntersectionLine &line : lines) {
+            if (! line.skip) {
+                if (line.edge_a_id != -1)
+                    by_edge_a_id.emplace_back(&line);
+                if (line.a_id != -1)
+                    by_a_id.emplace_back(&line);
+            }
+        }
+        auto by_edge_lower = [](const IntersectionLine* il1, const IntersectionLine *il2) { return il1->edge_a_id < il2->edge_a_id; };
+        auto by_vertex_lower = [](const IntersectionLine* il1, const IntersectionLine *il2) { return il1->a_id < il2->a_id; };
+        std::sort(by_edge_a_id.begin(), by_edge_a_id.end(), by_edge_lower);
+        std::sort(by_a_id.begin(), by_a_id.end(), by_vertex_lower);
+        // Chain the segments with a greedy algorithm, collect the loops and unclosed polylines.
+        IntersectionLines::iterator it_line_seed = lines.begin();
+        for (;;) {
+            // take first spare line and start a new loop
+            IntersectionLine *first_line = nullptr;
+            for (; it_line_seed != lines.end(); ++ it_line_seed)
+                if (! it_line_seed->skip) {
+                    first_line = &(*it_line_seed ++);
+                    break;
+                }
+            if (first_line == nullptr)
+                break;
+            first_line->skip = true;
+            Points loop_pts;
+            loop_pts.emplace_back(first_line->a);
+            IntersectionLine *last_line = first_line;
+            
+            /*
+            printf("first_line edge_a_id = %d, edge_b_id = %d, a_id = %d, b_id = %d, a = %d,%d, b = %d,%d\n", 
+                first_line->edge_a_id, first_line->edge_b_id, first_line->a_id, first_line->b_id,
+                first_line->a.x, first_line->a.y, first_line->b.x, first_line->b.y);
+            */
+            
+            IntersectionLine key;
+            for (;;) {
+                // find a line starting where last one finishes
+                IntersectionLine* next_line = nullptr;
+                if (last_line->edge_b_id != -1) {
+                    key.edge_a_id = last_line->edge_b_id;
+                    auto it_begin = std::lower_bound(by_edge_a_id.begin(), by_edge_a_id.end(), &key, by_edge_lower);
+                    if (it_begin != by_edge_a_id.end()) {
+                        auto it_end = std::upper_bound(it_begin, by_edge_a_id.end(), &key, by_edge_lower);
+                        for (auto it_line = it_begin; it_line != it_end; ++ it_line)
+                            if (! (*it_line)->skip) {
+                                next_line = *it_line;
+                                break;
+                            }
+                    }
+                }
+                if (next_line == nullptr && last_line->b_id != -1) {
+                    key.a_id = last_line->b_id;
+                    auto it_begin = std::lower_bound(by_a_id.begin(), by_a_id.end(), &key, by_vertex_lower);
+                    if (it_begin != by_a_id.end()) {
+                        auto it_end = std::upper_bound(it_begin, by_a_id.end(), &key, by_vertex_lower);
+                        for (auto it_line = it_begin; it_line != it_end; ++ it_line)
+                            if (! (*it_line)->skip) {
+                                next_line = *it_line;
+                                break;
+                            }
+                    }
+                }
+                if (next_line == nullptr) {
+                    // Check whether we closed this loop.
+                    if ((first_line->edge_a_id != -1 && first_line->edge_a_id == last_line->edge_b_id) || 
+                        (first_line->a_id      != -1 && first_line->a_id      == last_line->b_id)) {
+                        // The current loop is complete. Add it to the output.
+                        loops->emplace_back(std::move(loop_pts));
+                        #ifdef SLIC3R_TRIANGLEMESH_DEBUG
+                        printf("  Discovered %s polygon of %d points\n", (p.is_counter_clockwise() ? "ccw" : "cw"), (int)p.points.size());
+                        #endif
+                    } else {
+                        // This is an open polyline. Add it to the list of open polylines. These open polylines will processed later.
+                        loop_pts.emplace_back(last_line->b);
+                        open_polylines.emplace_back(OpenPolyline(
+                            IntersectionReference(first_line->a_id, first_line->edge_a_id), 
+                            IntersectionReference(last_line->b_id, last_line->edge_b_id), std::move(loop_pts)));
+                    }
+                    break;
+                }
+                /*
+                printf("next_line edge_a_id = %d, edge_b_id = %d, a_id = %d, b_id = %d, a = %d,%d, b = %d,%d\n", 
+                    next_line->edge_a_id, next_line->edge_b_id, next_line->a_id, next_line->b_id,
+                    next_line->a.x, next_line->a.y, next_line->b.x, next_line->b.y);
+                */
+                loop_pts.emplace_back(next_line->a);
+                last_line = next_line;
+                next_line->skip = true;
+            }
         }
     }
-    auto by_edge_lower = [](const IntersectionLine* il1, const IntersectionLine *il2) { return il1->edge_a_id < il2->edge_a_id; };
-    auto by_vertex_lower = [](const IntersectionLine* il1, const IntersectionLine *il2) { return il1->a_id < il2->a_id; };
-    std::sort(by_edge_a_id.begin(), by_edge_a_id.end(), by_edge_lower);
-    std::sort(by_a_id.begin(), by_a_id.end(), by_vertex_lower);
 
-    IntersectionLines::iterator it_line_seed = lines.begin();
-    CYCLE: while (1) {
-        // take first spare line and start a new loop
-        IntersectionLine *first_line = nullptr;
-        for (; it_line_seed != lines.end(); ++ it_line_seed)
-            if (! it_line_seed->skip) {
-                first_line = &(*it_line_seed ++);
-                break;
-            }
-        if (first_line == nullptr)
-            break;
-        first_line->skip = true;
-        Points loop_pts;
-        loop_pts.push_back(first_line->a);
-        IntersectionLine *last_line = first_line;
-        
-        /*
-        printf("first_line edge_a_id = %d, edge_b_id = %d, a_id = %d, b_id = %d, a = %d,%d, b = %d,%d\n", 
-            first_line->edge_a_id, first_line->edge_b_id, first_line->a_id, first_line->b_id,
-            first_line->a.x, first_line->a.y, first_line->b.x, first_line->b.y);
-        */
-        
-        IntersectionLine key;
-        for (;;) {
-            // find a line starting where last one finishes
-            IntersectionLine* next_line = nullptr;
-            if (last_line->edge_b_id != -1) {
-                key.edge_a_id = last_line->edge_b_id;
-                auto it_begin = std::lower_bound(by_edge_a_id.begin(), by_edge_a_id.end(), &key, by_edge_lower);
-                if (it_begin != by_edge_a_id.end()) {
-                    auto it_end = std::upper_bound(it_begin, by_edge_a_id.end(), &key, by_edge_lower);
-                    for (auto it_line = it_begin; it_line != it_end; ++ it_line)
-                        if (! (*it_line)->skip) {
-                            next_line = *it_line;
-                            break;
-                        }
+    // Now process the open polylines.
+    if (! open_polylines.empty()) {
+        // Store the end points of open_polylines into vectors sorted
+        struct OpenPolylineEnd {
+            OpenPolylineEnd(OpenPolyline *polyline, bool start) : polyline(polyline), start(start) {}
+            OpenPolyline    *polyline;
+            // Is it the start or end point?
+            bool             start;
+            const IntersectionReference& ipref() const { return start ? polyline->start : polyline->end; }
+            int point_id() const { return ipref().point_id; }
+            int edge_id () const { return ipref().edge_id; }
+        };
+        auto by_edge_lower = [](const OpenPolylineEnd &ope1, const OpenPolylineEnd &ope2) { return ope1.edge_id() < ope2.edge_id(); };
+        auto by_point_lower = [](const OpenPolylineEnd &ope1, const OpenPolylineEnd &ope2) { return ope1.point_id() < ope2.point_id(); };
+        std::vector<OpenPolylineEnd> by_edge_id;
+        std::vector<OpenPolylineEnd> by_point_id;
+        by_edge_id.reserve(2 * open_polylines.size());
+        by_point_id.reserve(2 * open_polylines.size());
+        for (OpenPolyline &opl : open_polylines) {
+            if (opl.start.edge_id != -1)
+                by_edge_id .emplace_back(OpenPolylineEnd(&opl, true));
+            if (opl.end.edge_id != -1)
+                by_edge_id .emplace_back(OpenPolylineEnd(&opl, false));
+            if (opl.start.point_id != -1)
+                by_point_id.emplace_back(OpenPolylineEnd(&opl, true));
+            if (opl.end.point_id != -1)
+                by_point_id.emplace_back(OpenPolylineEnd(&opl, false));
+        }
+        std::sort(by_edge_id .begin(), by_edge_id .end(), by_edge_lower);
+        std::sort(by_point_id.begin(), by_point_id.end(), by_point_lower);
+
+        // Try to connect the loops.
+        for (OpenPolyline &opl : open_polylines) {
+            if (opl.consumed)
+                continue;
+            opl.consumed = true;
+            OpenPolylineEnd end(&opl, false);
+            for (;;) {
+                // find a line starting where last one finishes
+                OpenPolylineEnd* next_start = nullptr;
+                if (end.edge_id() != -1) {
+                    auto it_begin = std::lower_bound(by_edge_id.begin(), by_edge_id.end(), end, by_edge_lower);
+                    if (it_begin != by_edge_id.end()) {
+                        auto it_end = std::upper_bound(it_begin, by_edge_id.end(), end, by_edge_lower);
+                        for (auto it_edge = it_begin; it_edge != it_end; ++ it_edge)
+                            if (! it_edge->polyline->consumed) {
+                                next_start = &(*it_edge);
+                                break;
+                            }
+                    }
                 }
-            }
-            if (next_line == nullptr && last_line->b_id != -1) {
-                key.a_id = last_line->b_id;
-                auto it_begin = std::lower_bound(by_a_id.begin(), by_a_id.end(), &key, by_vertex_lower);
-                if (it_begin != by_a_id.end()) {
-                    auto it_end = std::upper_bound(it_begin, by_a_id.end(), &key, by_vertex_lower);
-                    for (auto it_line = it_begin; it_line != it_end; ++ it_line)
-                        if (! (*it_line)->skip) {
-                            next_line = *it_line;
-                            break;
-                        }
+                if (next_start == nullptr && end.point_id() != -1) {
+                    auto it_begin = std::lower_bound(by_point_id.begin(), by_point_id.end(), end, by_point_lower);
+                    if (it_begin != by_point_id.end()) {
+                        auto it_end = std::upper_bound(it_begin, by_point_id.end(), end, by_point_lower);
+                        for (auto it_point = it_begin; it_point != it_end; ++ it_point)
+                            if (! it_point->polyline->consumed) {
+                                next_start = &(*it_point);
+                                break;
+                            }
+                    }
                 }
-            }
-            if (next_line == nullptr) {
-                // check whether we closed this loop
-                if ((first_line->edge_a_id != -1 && first_line->edge_a_id == last_line->edge_b_id) || 
-                    (first_line->a_id      != -1 && first_line->a_id      == last_line->b_id)) {
-                    // loop is complete
-                    loops->emplace_back(std::move(loop_pts));
-                    #ifdef SLIC3R_TRIANGLEMESH_DEBUG
-                    printf("  Discovered %s polygon of %d points\n", (p.is_counter_clockwise() ? "ccw" : "cw"), (int)p.points.size());
-                    #endif
-                    goto CYCLE;
+				if (next_start == nullptr) {
+					// The current loop could not be closed. Unmark the segment.
+					opl.consumed = false;
+					break;
+				}
+				// Attach this polyline to the end of the initial polyline.
+                if (next_start->start) {
+                    auto it = next_start->polyline->points.begin();
+                    std::copy(++ it, next_start->polyline->points.end(), back_inserter(opl.points));
+                    //opl.points.insert(opl.points.back(), ++ it, next_start->polyline->points.end());
+                } else {
+                    auto it = next_start->polyline->points.rbegin();
+                    std::copy(++ it, next_start->polyline->points.rend(), back_inserter(opl.points));
+                    //opl.points.insert(opl.points.back(), ++ it, next_start->polyline->points.rend());
                 }
-                // we can't close this loop!
-                //// push @failed_loops, [@loop];
-                //#ifdef SLIC3R_TRIANGLEMESH_DEBUG
-                printf("  Unable to close this loop having %d points\n", (int)loop_pts.size());
-                //#endif
-                goto CYCLE;
+                end = *next_start;
+                end.start = !end.start;
+                next_start->polyline->points.clear();
+                next_start->polyline->consumed = true;
+                // Check whether we closed this loop.
+                const IntersectionReference &ip1 = opl.start;
+                const IntersectionReference &ip2 = end.ipref();
+                if ((ip1.edge_id  != -1 && ip1.edge_id  == ip2.edge_id) ||
+                    (ip1.point_id != -1 && ip1.point_id == ip2.point_id)) {
+                    // The current loop is complete. Add it to the output.
+                    assert(opl.points.front().point_id == opl.points.back().point_id);
+                    assert(opl.points.front().edge_id  == opl.points.back().edge_id);
+                    // Remove the duplicate last point.
+                    opl.points.pop_back();
+                    if (opl.points.size() >= 3) {
+                        // The closed polygon is patched from pieces with messed up orientation, therefore
+                        // the orientation of the patched up polygon is not known.
+                        // Orient the patched up polygons CCW. This heuristic may close some holes and cavities.
+                        double area = 0.;
+                        for (size_t i = 0, j = opl.points.size() - 1; i < opl.points.size(); j = i ++)
+                            area += double(opl.points[j].x + opl.points[i].x) * double(opl.points[i].y - opl.points[j].y);
+                        if (area < 0)
+                            std::reverse(opl.points.begin(), opl.points.end());
+                        loops->emplace_back(std::move(opl.points));
+                    }
+                    opl.points.clear();
+					break;
+                }
+				// Continue with the current loop.
             }
-            /*
-            printf("next_line edge_a_id = %d, edge_b_id = %d, a_id = %d, b_id = %d, a = %d,%d, b = %d,%d\n", 
-                next_line->edge_a_id, next_line->edge_b_id, next_line->a_id, next_line->b_id,
-                next_line->a.x, next_line->a.y, next_line->b.x, next_line->b.y);
-            */
-            loop_pts.push_back(next_line->a);
-            last_line = next_line;
-            next_line->skip = true;
         }
     }
 }
diff --git a/xs/src/libslic3r/TriangleMesh.hpp b/xs/src/libslic3r/TriangleMesh.hpp
index 3192c90b6..c700784a5 100644
--- a/xs/src/libslic3r/TriangleMesh.hpp
+++ b/xs/src/libslic3r/TriangleMesh.hpp
@@ -85,11 +85,11 @@ enum FacetEdgeType {
     feHorizontal
 };
 
-class IntersectionPoint : public Point
+class IntersectionReference
 {
 public:
-    IntersectionPoint() : point_id(-1), edge_id(-1) {};
-    // Inherits coord_t x, y
+    IntersectionReference() : point_id(-1), edge_id(-1) {};
+    IntersectionReference(int point_id, int edge_id) : point_id(point_id), edge_id(edge_id) {}
     // Where is this intersection point located? On mesh vertex or mesh edge?
     // Only one of the following will be set, the other will remain set to -1.
     // Index of the mesh vertex.
@@ -98,6 +98,15 @@ public:
     int edge_id;
 };
 
+class IntersectionPoint : public Point, public IntersectionReference
+{
+public:
+    IntersectionPoint() {};
+    IntersectionPoint(int point_id, int edge_id, const Point &pt) : IntersectionReference(point_id, edge_id), Point(pt) {}
+    IntersectionPoint(const IntersectionReference &ir, const Point &pt) : IntersectionReference(ir), Point(pt) {}
+    // Inherits coord_t x, y
+};
+
 class IntersectionLine : public Line
 {
 public:
diff --git a/xs/src/slic3r/GUI/3DScene.cpp b/xs/src/slic3r/GUI/3DScene.cpp
index 419048223..994c62a83 100644
--- a/xs/src/slic3r/GUI/3DScene.cpp
+++ b/xs/src/slic3r/GUI/3DScene.cpp
@@ -46,6 +46,25 @@ void GLIndexedVertexArray::load_mesh_flat_shading(const TriangleMesh &mesh)
     }
 }
 
+void GLIndexedVertexArray::load_mesh_full_shading(const TriangleMesh &mesh)
+{
+    assert(triangle_indices.empty() && vertices_and_normals_interleaved_size == 0);
+    assert(quad_indices.empty() && triangle_indices_size == 0);
+    assert(vertices_and_normals_interleaved.size() % 6 == 0 && quad_indices_size == vertices_and_normals_interleaved.size());
+
+    this->vertices_and_normals_interleaved.reserve(this->vertices_and_normals_interleaved.size() + 3 * 3 * 2 * mesh.facets_count());
+
+    unsigned int vertices_count = 0;
+    for (int i = 0; i < mesh.stl.stats.number_of_facets; ++i) {
+        const stl_facet &facet = mesh.stl.facet_start[i];
+        for (int j = 0; j < 3; ++j)
+            this->push_geometry(facet.vertex[j].x, facet.vertex[j].y, facet.vertex[j].z, facet.normal.x, facet.normal.y, facet.normal.z);
+
+        this->push_triangle(vertices_count, vertices_count + 1, vertices_count + 2);
+        vertices_count += 3;
+    }
+}
+
 void GLIndexedVertexArray::finalize_geometry(bool use_VBOs)
 {
     assert(this->vertices_and_normals_interleaved_VBO_id == 0);
@@ -173,6 +192,45 @@ void GLIndexedVertexArray::render(
     glDisableClientState(GL_NORMAL_ARRAY);
 }
 
+const float GLVolume::SELECTED_COLOR[4] = { 0.0f, 1.0f, 0.0f, 1.0f };
+const float GLVolume::HOVER_COLOR[4] = { 0.4f, 0.9f, 0.1f, 1.0f };
+const float GLVolume::OUTSIDE_COLOR[4] = { 0.75f, 0.0f, 0.75f, 1.0f };
+const float GLVolume::SELECTED_OUTSIDE_COLOR[4] = { 1.0f, 0.0f, 1.0f, 1.0f };
+
+void GLVolume::set_render_color(float r, float g, float b, float a)
+{
+    render_color[0] = r;
+    render_color[1] = g;
+    render_color[2] = b;
+    render_color[3] = a;
+}
+
+void GLVolume::set_render_color(const float* rgba, unsigned int size)
+{
+    size = std::min((unsigned int)4, size);
+    for (int i = 0; i < size; ++i)
+    {
+        render_color[i] = rgba[i];
+    }
+}
+
+void GLVolume::set_render_color()
+{
+    if (selected)
+    {
+        if (is_outside)
+            set_render_color(SELECTED_OUTSIDE_COLOR, 4);
+        else
+            set_render_color(SELECTED_COLOR, 4);
+    }
+    else if (hover)
+        set_render_color(HOVER_COLOR, 4);
+    else if (is_outside)
+        set_render_color(OUTSIDE_COLOR, 4);
+    else
+        set_render_color(color, 4);
+}
+
 void GLVolume::set_range(double min_z, double max_z)
 {
     this->qverts_range.first  = 0;
@@ -223,6 +281,51 @@ void GLVolume::render() const
     glPopMatrix();
 }
 
+void GLVolume::render_using_layer_height() const
+{
+    if (!is_active)
+        return;
+
+    GLint current_program_id;
+    glGetIntegerv(GL_CURRENT_PROGRAM, &current_program_id);
+
+    if ((layer_height_texture_data.shader_id > 0) && (layer_height_texture_data.shader_id != current_program_id))
+        glUseProgram(layer_height_texture_data.shader_id);
+
+    GLint z_to_texture_row_id = (layer_height_texture_data.shader_id > 0) ? glGetUniformLocation(layer_height_texture_data.shader_id, "z_to_texture_row") : -1;
+    GLint z_texture_row_to_normalized_id = (layer_height_texture_data.shader_id > 0) ? glGetUniformLocation(layer_height_texture_data.shader_id, "z_texture_row_to_normalized") : -1;
+    GLint z_cursor_id = (layer_height_texture_data.shader_id > 0) ? glGetUniformLocation(layer_height_texture_data.shader_id, "z_cursor") : -1;
+    GLint z_cursor_band_width_id = (layer_height_texture_data.shader_id > 0) ? glGetUniformLocation(layer_height_texture_data.shader_id, "z_cursor_band_width") : -1;
+
+    if (z_to_texture_row_id  >= 0)
+        glUniform1f(z_to_texture_row_id, (GLfloat)layer_height_texture_z_to_row_id());
+
+    if (z_texture_row_to_normalized_id >= 0)
+        glUniform1f(z_texture_row_to_normalized_id, (GLfloat)(1.0f / layer_height_texture_height()));
+
+    if (z_cursor_id >= 0)
+        glUniform1f(z_cursor_id, (GLfloat)(bounding_box.max.z * layer_height_texture_data.z_cursor_relative));
+
+    if (z_cursor_band_width_id >= 0)
+        glUniform1f(z_cursor_band_width_id, (GLfloat)layer_height_texture_data.edit_band_width);
+
+    unsigned int w = layer_height_texture_width();
+    unsigned int h = layer_height_texture_height();
+
+    glBindTexture(GL_TEXTURE_2D, layer_height_texture_data.texture_id);
+    glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA8, w, h, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
+    glTexImage2D(GL_TEXTURE_2D, 1, GL_RGBA8, w / 2, h / 2, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0);
+    glTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, w, h, GL_RGBA, GL_UNSIGNED_BYTE, layer_height_texture_data_ptr_level0());
+    glTexSubImage2D(GL_TEXTURE_2D, 1, 0, 0, w / 2, h / 2, GL_RGBA, GL_UNSIGNED_BYTE, layer_height_texture_data_ptr_level1());
+
+    render();
+
+    glBindTexture(GL_TEXTURE_2D, 0);
+
+    if ((current_program_id > 0) && (layer_height_texture_data.shader_id != current_program_id))
+        glUseProgram(current_program_id);
+}
+
 void GLVolume::generate_layer_height_texture(PrintObject *print_object, bool force)
 {
     GLTexture *tex = this->layer_height_texture.get();
@@ -288,7 +391,11 @@ std::vector<int> GLVolumeCollection::load_object(
             color[3] = model_volume->modifier ? 0.5f : 1.f;
             this->volumes.emplace_back(new GLVolume(color));
             GLVolume &v = *this->volumes.back();
-			v.indexed_vertex_array.load_mesh_flat_shading(mesh);
+            if (use_VBOs)
+                v.indexed_vertex_array.load_mesh_full_shading(mesh);
+            else
+                v.indexed_vertex_array.load_mesh_flat_shading(mesh);
+
             // finalize_geometry() clears the vertex arrays, therefore the bounding box has to be computed before finalize_geometry().
             v.bounding_box = v.indexed_vertex_array.bounding_box();
             v.indexed_vertex_array.finalize_geometry(use_VBOs);
@@ -318,12 +425,17 @@ int GLVolumeCollection::load_wipe_tower_preview(
     float color[4] = { 1.0f, 1.0f, 0.0f, 0.5f };
     this->volumes.emplace_back(new GLVolume(color));
     GLVolume &v = *this->volumes.back();
+
     auto mesh = make_cube(width, depth, height);    
     mesh.translate(-width/2.f,-depth/2.f,0.f);    
     Point origin_of_rotation(0.f,0.f);
     mesh.rotate(rotation_angle,&origin_of_rotation);
 
-    v.indexed_vertex_array.load_mesh_flat_shading(mesh);
+    if (use_VBOs)
+        v.indexed_vertex_array.load_mesh_full_shading(mesh);
+    else
+        v.indexed_vertex_array.load_mesh_flat_shading(mesh);
+
     v.origin = Pointf3(pos_x, pos_y, 0.);
     // finalize_geometry() clears the vertex arrays, therefore the bounding box has to be computed before finalize_geometry().
     v.bounding_box = v.indexed_vertex_array.bounding_box();
@@ -336,15 +448,19 @@ int GLVolumeCollection::load_wipe_tower_preview(
 
 void GLVolumeCollection::render_VBOs() const
 {
-//    glEnable(GL_BLEND);
-//    glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
-    glCullFace(GL_BACK);
-    glEnableClientState(GL_VERTEX_ARRAY);
-    glEnableClientState(GL_NORMAL_ARRAY);
+    ::glEnable(GL_BLEND);
+    ::glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
+
+    ::glCullFace(GL_BACK);
+    ::glEnableClientState(GL_VERTEX_ARRAY);
+    ::glEnableClientState(GL_NORMAL_ARRAY);
  
     GLint current_program_id;
-    glGetIntegerv(GL_CURRENT_PROGRAM, &current_program_id);
+    ::glGetIntegerv(GL_CURRENT_PROGRAM, &current_program_id);
     GLint color_id = (current_program_id > 0) ? glGetUniformLocation(current_program_id, "uniform_color") : -1;
+    GLint print_box_min_id = (current_program_id > 0) ? glGetUniformLocation(current_program_id, "print_box.min") : -1;
+    GLint print_box_max_id = (current_program_id > 0) ? glGetUniformLocation(current_program_id, "print_box.max") : -1;
+    GLint print_box_origin_id = (current_program_id > 0) ? glGetUniformLocation(current_program_id, "print_box.volume_origin") : -1;
 
     for (GLVolume *volume : this->volumes) {
         if (!volume->is_active)
@@ -352,61 +468,110 @@ void GLVolumeCollection::render_VBOs() const
 
         if (!volume->indexed_vertex_array.vertices_and_normals_interleaved_VBO_id)
             continue;
+
+        if (volume->layer_height_texture_data.can_use())
+        {
+            ::glDisableClientState(GL_VERTEX_ARRAY);
+            ::glDisableClientState(GL_NORMAL_ARRAY);
+            volume->generate_layer_height_texture(volume->layer_height_texture_data.print_object, false);
+            volume->render_using_layer_height();
+            ::glEnableClientState(GL_VERTEX_ARRAY);
+            ::glEnableClientState(GL_NORMAL_ARRAY);
+            continue;
+        }
+
+        volume->set_render_color();
+
         GLsizei n_triangles = GLsizei(std::min(volume->indexed_vertex_array.triangle_indices_size, volume->tverts_range.second - volume->tverts_range.first));
         GLsizei n_quads     = GLsizei(std::min(volume->indexed_vertex_array.quad_indices_size,     volume->qverts_range.second - volume->qverts_range.first));
         if (n_triangles + n_quads == 0)
         {
-            if (_render_interleaved_only_volumes.enabled)
+            ::glDisableClientState(GL_VERTEX_ARRAY);
+            ::glDisableClientState(GL_NORMAL_ARRAY);
+
+            if (color_id >= 0)
             {
-                ::glDisableClientState(GL_VERTEX_ARRAY);
-                ::glDisableClientState(GL_NORMAL_ARRAY);
-                ::glEnable(GL_BLEND);
-                ::glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
-
-                if (color_id >= 0)
-                {
-                    float color[4];
-                    ::memcpy((void*)color, (const void*)volume->color, 3 * sizeof(float));
-                    color[3] = _render_interleaved_only_volumes.alpha;
-                    ::glUniform4fv(color_id, 1, (const GLfloat*)color);
-                }
-                else
-                    ::glColor4f(volume->color[0], volume->color[1], volume->color[2], _render_interleaved_only_volumes.alpha);
-
-                volume->render();
-
-                ::glDisable(GL_BLEND);
-                ::glEnableClientState(GL_VERTEX_ARRAY);
-                ::glEnableClientState(GL_NORMAL_ARRAY);
+                float color[4];
+                ::memcpy((void*)color, (const void*)volume->render_color, 4 * sizeof(float));
+                ::glUniform4fv(color_id, 1, (const GLfloat*)color);
             }
+            else
+                ::glColor4f(volume->render_color[0], volume->render_color[1], volume->render_color[2], volume->render_color[3]);
+
+            if (print_box_min_id != -1)
+                ::glUniform3fv(print_box_min_id, 1, (const GLfloat*)print_box_min);
+
+            if (print_box_max_id != -1)
+                ::glUniform3fv(print_box_max_id, 1, (const GLfloat*)print_box_max);
+
+            if (print_box_origin_id != -1)
+            {
+                float origin[4] = { (float)volume->origin.x, (float)volume->origin.y, (float)volume->origin.z, volume->outside_printer_detection_enabled ? 1.0f : 0.0f };
+                ::glUniform4fv(print_box_origin_id, 1, (const GLfloat*)origin);
+            }
+
+            volume->render();
+
+            ::glEnableClientState(GL_VERTEX_ARRAY);
+            ::glEnableClientState(GL_NORMAL_ARRAY);
+
             continue;
         }
+
         if (color_id >= 0)
-            glUniform4fv(color_id, 1, (const GLfloat*)volume->color);
+            ::glUniform4fv(color_id, 1, (const GLfloat*)volume->render_color);
         else
-            glColor4f(volume->color[0], volume->color[1], volume->color[2], volume->color[3]);            
-        glBindBuffer(GL_ARRAY_BUFFER, volume->indexed_vertex_array.vertices_and_normals_interleaved_VBO_id);
-        glVertexPointer(3, GL_FLOAT, 6 * sizeof(float), (const void*)(3 * sizeof(float)));
-        glNormalPointer(GL_FLOAT, 6 * sizeof(float), nullptr);
+            ::glColor4f(volume->render_color[0], volume->render_color[1], volume->render_color[2], volume->render_color[3]);
+
+        if (print_box_min_id != -1)
+            ::glUniform3fv(print_box_min_id, 1, (const GLfloat*)print_box_min);
+
+        if (print_box_max_id != -1)
+            ::glUniform3fv(print_box_max_id, 1, (const GLfloat*)print_box_max);
+
+        if (print_box_origin_id != -1)
+        {
+            float origin[4] = { (float)volume->origin.x, (float)volume->origin.y, (float)volume->origin.z, volume->outside_printer_detection_enabled ? 1.0f : 0.0f };
+            ::glUniform4fv(print_box_origin_id, 1, (const GLfloat*)origin);
+        }
+
+        ::glBindBuffer(GL_ARRAY_BUFFER, volume->indexed_vertex_array.vertices_and_normals_interleaved_VBO_id);
+        ::glVertexPointer(3, GL_FLOAT, 6 * sizeof(float), (const void*)(3 * sizeof(float)));
+        ::glNormalPointer(GL_FLOAT, 6 * sizeof(float), nullptr);
+
+        bool has_offset = (volume->origin.x != 0) || (volume->origin.y != 0) || (volume->origin.z != 0);
+        if (has_offset) {
+            ::glPushMatrix();
+            ::glTranslated(volume->origin.x, volume->origin.y, volume->origin.z);
+        }
+
         if (n_triangles > 0) {
-            glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, volume->indexed_vertex_array.triangle_indices_VBO_id);
-            glDrawElements(GL_TRIANGLES, n_triangles, GL_UNSIGNED_INT, (const void*)(volume->tverts_range.first * 4));
+            ::glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, volume->indexed_vertex_array.triangle_indices_VBO_id);
+            ::glDrawElements(GL_TRIANGLES, n_triangles, GL_UNSIGNED_INT, (const void*)(volume->tverts_range.first * 4));
         }
         if (n_quads > 0) {
-            glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, volume->indexed_vertex_array.quad_indices_VBO_id);
-            glDrawElements(GL_QUADS, n_quads, GL_UNSIGNED_INT, (const void*)(volume->qverts_range.first * 4));
+            ::glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, volume->indexed_vertex_array.quad_indices_VBO_id);
+            ::glDrawElements(GL_QUADS, n_quads, GL_UNSIGNED_INT, (const void*)(volume->qverts_range.first * 4));
         }
+
+        if (has_offset)
+            ::glPopMatrix();
     }
 
-    glBindBuffer(GL_ARRAY_BUFFER, 0);
-    glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, 0);
-    glDisableClientState(GL_VERTEX_ARRAY);
-    glDisableClientState(GL_NORMAL_ARRAY);
-//    glDisable(GL_BLEND);
+    ::glBindBuffer(GL_ARRAY_BUFFER, 0);
+    ::glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, 0);
+
+    ::glDisableClientState(GL_VERTEX_ARRAY);
+    ::glDisableClientState(GL_NORMAL_ARRAY);
+
+    ::glDisable(GL_BLEND);
 }
 
 void GLVolumeCollection::render_legacy() const
 {
+    glEnable(GL_BLEND);
+    glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
+
     glCullFace(GL_BACK);
     glEnableClientState(GL_VERTEX_ARRAY);
     glEnableClientState(GL_NORMAL_ARRAY);
@@ -416,27 +581,25 @@ void GLVolumeCollection::render_legacy() const
         if (!volume->is_active)
             continue;
 
+        volume->set_render_color();
+
         GLsizei n_triangles = GLsizei(std::min(volume->indexed_vertex_array.triangle_indices_size, volume->tverts_range.second - volume->tverts_range.first));
         GLsizei n_quads     = GLsizei(std::min(volume->indexed_vertex_array.quad_indices_size,     volume->qverts_range.second - volume->qverts_range.first));
         if (n_triangles + n_quads == 0)
         {
-            if (_render_interleaved_only_volumes.enabled)
-            {
-                ::glDisableClientState(GL_VERTEX_ARRAY);
-                ::glDisableClientState(GL_NORMAL_ARRAY);
-                ::glEnable(GL_BLEND);
-                ::glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA);
+            ::glDisableClientState(GL_VERTEX_ARRAY);
+            ::glDisableClientState(GL_NORMAL_ARRAY);
 
-                ::glColor4f(volume->color[0], volume->color[1], volume->color[2], _render_interleaved_only_volumes.alpha);
-                volume->render();
+            ::glColor4f(volume->render_color[0], volume->render_color[1], volume->render_color[2], volume->render_color[3]);
+            volume->render();
+
+            ::glEnableClientState(GL_VERTEX_ARRAY);
+            ::glEnableClientState(GL_NORMAL_ARRAY);
 
-                ::glDisable(GL_BLEND);
-                ::glEnableClientState(GL_VERTEX_ARRAY);
-                ::glEnableClientState(GL_NORMAL_ARRAY);
-            }
             continue;
         }
-        glColor4f(volume->color[0], volume->color[1], volume->color[2], volume->color[3]);
+
+        glColor4f(volume->render_color[0], volume->render_color[1], volume->render_color[2], volume->render_color[3]);
         glVertexPointer(3, GL_FLOAT, 6 * sizeof(float), volume->indexed_vertex_array.vertices_and_normals_interleaved.data() + 3);
         glNormalPointer(GL_FLOAT, 6 * sizeof(float), volume->indexed_vertex_array.vertices_and_normals_interleaved.data());
         bool has_offset = volume->origin.x != 0 || volume->origin.y != 0 || volume->origin.z != 0;
@@ -449,11 +612,37 @@ void GLVolumeCollection::render_legacy() const
         if (n_quads > 0)
             glDrawElements(GL_QUADS, n_quads, GL_UNSIGNED_INT, volume->indexed_vertex_array.quad_indices.data() + volume->qverts_range.first);
         if (has_offset)
-            glPushMatrix();
+            glPopMatrix();
     }
 
     glDisableClientState(GL_VERTEX_ARRAY);
     glDisableClientState(GL_NORMAL_ARRAY);
+
+    glDisable(GL_BLEND);
+}
+
+void GLVolumeCollection::update_outside_state(const DynamicPrintConfig* config, bool all_inside)
+{
+    if (config == nullptr)
+        return;
+
+    const ConfigOptionPoints* opt = dynamic_cast<const ConfigOptionPoints*>(config->option("bed_shape"));
+    if (opt == nullptr)
+        return;
+
+    BoundingBox bed_box_2D = get_extents(Polygon::new_scale(opt->values));
+    BoundingBoxf3 print_volume(Pointf3(unscale(bed_box_2D.min.x), unscale(bed_box_2D.min.y), 0.0), Pointf3(unscale(bed_box_2D.max.x), unscale(bed_box_2D.max.y), config->opt_float("max_print_height")));
+
+    for (GLVolume* volume : this->volumes)
+    {
+        if (all_inside)
+        {
+            volume->is_outside = false;
+            continue;
+        }
+
+        volume->is_outside = !print_volume.contains(volume->transformed_bounding_box());
+    }
 }
 
 std::vector<double> GLVolumeCollection::get_current_print_zs() const
@@ -1137,6 +1326,100 @@ static void point3_to_verts(const Point3& point, double width, double height, GL
 
 _3DScene::GCodePreviewVolumeIndex _3DScene::s_gcode_preview_volume_index;
 _3DScene::LegendTexture _3DScene::s_legend_texture;
+_3DScene::WarningTexture _3DScene::s_warning_texture;
+
+unsigned int _3DScene::TextureBase::finalize()
+{
+    if (!m_data.empty()) {
+        // sends buffer to gpu
+        ::glGenTextures(1, &m_tex_id);
+        ::glBindTexture(GL_TEXTURE_2D, m_tex_id);
+        ::glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA8, (GLsizei)m_tex_width, (GLsizei)m_tex_height, 0, GL_RGBA, GL_UNSIGNED_BYTE, (const GLvoid*)m_data.data());
+        ::glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
+        ::glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
+        ::glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAX_LEVEL, 1);
+        ::glBindTexture(GL_TEXTURE_2D, 0);
+        m_data.clear();
+    }
+    return (m_tex_width > 0 && m_tex_height > 0) ? m_tex_id : 0;
+}
+
+void _3DScene::TextureBase::_destroy_texture()
+{
+    if (m_tex_id > 0)
+    {
+        ::glDeleteTextures(1, &m_tex_id);
+        m_tex_id = 0;
+        m_tex_height = 0;
+        m_tex_width = 0;
+    }
+    m_data.clear();
+}
+
+
+const unsigned char _3DScene::WarningTexture::Background_Color[3] = { 9, 91, 134 };
+const unsigned char _3DScene::WarningTexture::Opacity = 255;
+
+// Generate a texture data, but don't load it into the GPU yet, as the GPU context may not yet be valid.
+bool _3DScene::WarningTexture::generate(const std::string& msg)
+{
+    // Mark the texture as released, but don't release the texture from the GPU yet.
+    m_tex_width = m_tex_height = 0;
+    m_data.clear();
+
+    if (msg.empty())
+        return false;
+
+    wxMemoryDC memDC;
+    // select default font
+    memDC.SetFont(wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT));
+
+    // calculates texture size
+    wxCoord w, h;
+    memDC.GetTextExtent(msg, &w, &h);
+    m_tex_width = (unsigned int)w;
+    m_tex_height = (unsigned int)h;
+
+    // generates bitmap
+    wxBitmap bitmap(m_tex_width, m_tex_height);
+
+#if defined(__APPLE__) || defined(_MSC_VER)
+    bitmap.UseAlpha();
+#endif
+
+    memDC.SelectObject(bitmap);
+    memDC.SetBackground(wxBrush(wxColour(Background_Color[0], Background_Color[1], Background_Color[2])));
+    memDC.Clear();
+
+    memDC.SetTextForeground(*wxWHITE);
+
+    // draw message
+    memDC.DrawText(msg, 0, 0);
+
+    memDC.SelectObject(wxNullBitmap);
+
+    // Convert the bitmap into a linear data ready to be loaded into the GPU.
+    {
+        wxImage image = bitmap.ConvertToImage();
+        image.SetMaskColour(Background_Color[0], Background_Color[1], Background_Color[2]);
+
+        // prepare buffer
+        m_data.assign(4 * m_tex_width * m_tex_height, 0);
+        for (unsigned int h = 0; h < m_tex_height; ++h)
+        {
+            unsigned int hh = h * m_tex_width;
+            unsigned char* px_ptr = m_data.data() + 4 * hh;
+            for (unsigned int w = 0; w < m_tex_width; ++w)
+            {
+                *px_ptr++ = image.GetRed(w, h);
+                *px_ptr++ = image.GetGreen(w, h);
+                *px_ptr++ = image.GetBlue(w, h);
+                *px_ptr++ = image.IsTransparent(w, h) ? 0 : Opacity;
+            }
+        }
+    }
+    return true;
+}
 
 const unsigned char _3DScene::LegendTexture::Squares_Border_Color[3] = { 64, 64, 64 };
 const unsigned char _3DScene::LegendTexture::Background_Color[3] = { 9, 91, 134 };
@@ -1280,34 +1563,6 @@ bool _3DScene::LegendTexture::generate(const GCodePreviewData& preview_data, con
     return true;
 }
 
-unsigned int _3DScene::LegendTexture::finalize()
-{
-    if (! m_data.empty()) {
-        // sends buffer to gpu
-        ::glGenTextures(1, &m_tex_id);
-        ::glBindTexture(GL_TEXTURE_2D, m_tex_id);
-        ::glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA8, (GLsizei)m_tex_width, (GLsizei)m_tex_height, 0, GL_RGBA, GL_UNSIGNED_BYTE, (const GLvoid*)m_data.data());
-        ::glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR);
-        ::glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR);
-        ::glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAX_LEVEL, 1);
-        ::glBindTexture(GL_TEXTURE_2D, 0);
-        m_data.clear();
-    }
-    return (m_tex_width > 0 && m_tex_height > 0) ? m_tex_id : 0;
-}
-
-void _3DScene::LegendTexture::_destroy_texture()
-{
-    if (m_tex_id > 0)
-    {
-        ::glDeleteTextures(1, &m_tex_id);
-        m_tex_id = 0;
-        m_tex_height = 0;
-        m_tex_width = 0;
-    }
-    m_data.clear();
-}
-
 void _3DScene::_glew_init()
 { 
     glewInit();
@@ -1357,27 +1612,17 @@ void _3DScene::load_gcode_preview(const Print* print, const GCodePreviewData* pr
         _load_gcode_unretractions(*preview_data, *volumes, use_VBOs);
 
         if (volumes->empty())
-        {
             reset_legend_texture();
-            volumes->set_render_interleaved_only_volumes(GLVolumeCollection::RenderInterleavedOnlyVolumes(false, 0.0f));
-        }
         else
         {
             _generate_legend_texture(*preview_data, tool_colors);
-
             _load_shells(*print, *volumes, use_VBOs);
-            volumes->set_render_interleaved_only_volumes(GLVolumeCollection::RenderInterleavedOnlyVolumes(true, 0.25f));
         }
     }
 
     _update_gcode_volumes_visibility(*preview_data, *volumes);
 }
 
-unsigned int _3DScene::get_legend_texture_id()
-{
-    return s_legend_texture.get_texture_id();
-}
-
 unsigned int _3DScene::get_legend_texture_width()
 {
     return s_legend_texture.get_texture_width();
@@ -1393,6 +1638,36 @@ void _3DScene::reset_legend_texture()
     s_legend_texture.reset_texture();
 }
 
+unsigned int _3DScene::finalize_legend_texture()
+{
+    return s_legend_texture.finalize();
+}
+
+unsigned int _3DScene::get_warning_texture_width()
+{
+    return s_warning_texture.get_texture_width();
+}
+
+unsigned int _3DScene::get_warning_texture_height()
+{
+    return s_warning_texture.get_texture_height();
+}
+
+void _3DScene::generate_warning_texture(const std::string& msg)
+{
+    s_warning_texture.generate(msg);
+}
+
+void _3DScene::reset_warning_texture()
+{
+    s_warning_texture.reset_texture();
+}
+
+unsigned int _3DScene::finalize_warning_texture()
+{
+    return s_warning_texture.finalize();
+}
+
 // Create 3D thick extrusion lines for a skirt and brim.
 // Adds a new Slic3r::GUI::3DScene::Volume to volumes.
 void _3DScene::_load_print_toolpaths(
@@ -1505,6 +1780,7 @@ void _3DScene::_load_print_object_toolpaths(
     auto            new_volume = [volumes, &new_volume_mutex](const float *color) -> GLVolume* {
         auto *volume = new GLVolume(color);
         new_volume_mutex.lock();
+        volume->outside_printer_detection_enabled = false;
         volumes->volumes.emplace_back(volume);
         new_volume_mutex.unlock();
         return volume;
@@ -1655,6 +1931,7 @@ void _3DScene::_load_wipe_tower_toolpaths(
     auto            new_volume = [volumes, &new_volume_mutex](const float *color) -> GLVolume* {
         auto *volume = new GLVolume(color);
         new_volume_mutex.lock();
+        volume->outside_printer_detection_enabled = false;
         volumes->volumes.emplace_back(volume);
         new_volume_mutex.unlock();
         return volume;
@@ -2225,6 +2502,7 @@ void _3DScene::_update_gcode_volumes_visibility(const GCodePreviewData& preview_
         for (std::vector<GLVolume*>::iterator it = begin; it != end; ++it)
         {
             GLVolume* volume = *it;
+            volume->outside_printer_detection_enabled = false;
 
             switch (s_gcode_preview_volume_index.first_volumes[i].type)
             {
@@ -2257,6 +2535,7 @@ void _3DScene::_update_gcode_volumes_visibility(const GCodePreviewData& preview_
             case GCodePreviewVolumeIndex::Shell:
                 {
                     volume->is_active = preview_data.shell.is_visible;
+                    volume->color[3] = 0.25f;
                     volume->zoom_to_volumes = false;
                     break;
                 }
@@ -2276,11 +2555,6 @@ void _3DScene::_generate_legend_texture(const GCodePreviewData& preview_data, co
     s_legend_texture.generate(preview_data, tool_colors);
 }
 
-unsigned int _3DScene::finalize_legend_texture()
-{
-    return s_legend_texture.finalize();
-}
-
 void _3DScene::_load_shells(const Print& print, GLVolumeCollection& volumes, bool use_VBOs)
 {
     size_t initial_volumes_count = volumes.volumes.size();
diff --git a/xs/src/slic3r/GUI/3DScene.hpp b/xs/src/slic3r/GUI/3DScene.hpp
index a936173a0..f94dda066 100644
--- a/xs/src/slic3r/GUI/3DScene.hpp
+++ b/xs/src/slic3r/GUI/3DScene.hpp
@@ -16,6 +16,7 @@ class PrintObject;
 class Model;
 class ModelObject;
 class GCodePreviewData;
+class DynamicPrintConfig;
 
 // A container for interleaved arrays of 3D vertices and normals,
 // possibly indexed by triangles and / or quads.
@@ -85,6 +86,7 @@ public:
     unsigned int       quad_indices_VBO_id;
 
     void load_mesh_flat_shading(const TriangleMesh &mesh);
+    void load_mesh_full_shading(const TriangleMesh &mesh);
 
     inline bool has_VBOs() const { return vertices_and_normals_interleaved_VBO_id != 0; }
 
@@ -208,7 +210,38 @@ public:
 };
 
 class GLVolume {
+    struct LayerHeightTextureData
+    {
+        // ID of the layer height texture
+        unsigned int texture_id;
+        // ID of the shader used to render with the layer height texture
+        unsigned int shader_id;
+        // The print object to update when generating the layer height texture
+        PrintObject* print_object;
+
+        float        z_cursor_relative;
+        float        edit_band_width;
+
+        LayerHeightTextureData() { reset(); }
+
+        void reset()
+        {
+            texture_id = 0;
+            shader_id = 0;
+            print_object = nullptr;
+            z_cursor_relative = 0.0f;
+            edit_band_width = 0.0f;
+        }
+
+        bool can_use() { return (texture_id > 0) && (shader_id > 0) && (print_object != nullptr); }
+    };
+
 public:
+    static const float SELECTED_COLOR[4];
+    static const float HOVER_COLOR[4];
+    static const float OUTSIDE_COLOR[4];
+    static const float SELECTED_OUTSIDE_COLOR[4];
+
     GLVolume(float r = 1.f, float g = 1.f, float b = 1.f, float a = 1.f) :
         composite_id(-1),
         select_group_id(-1),
@@ -216,6 +249,8 @@ public:
         selected(false),
         is_active(true),
         zoom_to_volumes(true),
+        outside_printer_detection_enabled(true),
+        is_outside(false),
         hover(false),
         tverts_range(0, size_t(-1)),
         qverts_range(0, size_t(-1))
@@ -224,6 +259,7 @@ public:
         color[1] = g;
         color[2] = b;
         color[3] = a;
+        set_render_color(r, g, b, a);
     }
     GLVolume(const float *rgba) : GLVolume(rgba[0], rgba[1], rgba[2], rgba[3]) {}
 
@@ -243,7 +279,8 @@ public:
     Pointf3             origin;
     // Color of the triangles / quads held by this volume.
     float               color[4];
-
+    // Color used to render this volume.
+    float               render_color[4];
     // An ID containing the object ID, volume ID and instance ID.
     int                 composite_id;
     // An ID for group selection. It may be the same for all meshes of all object instances, or for just a single object instance.
@@ -256,6 +293,10 @@ public:
     bool                is_active;
     // Whether or not to use this volume when applying zoom_to_volumes()
     bool                zoom_to_volumes;
+    // Wheter or not this volume is enabled for outside print volume detection.
+    bool                outside_printer_detection_enabled;
+    // Wheter or not this volume is outside print volume.
+    bool                is_outside;
     // Boolean: Is mouse over this object?
     bool                hover;
 
@@ -271,6 +312,10 @@ public:
     // Offset into qverts & tverts, or offsets into indices stored into an OpenGL name_index_buffer.
     std::vector<size_t>         offsets;
 
+    void set_render_color(float r, float g, float b, float a);
+    void set_render_color(const float* rgba, unsigned int size);
+    // Sets render color in dependence of current state
+    void set_render_color();
 
     int                 object_idx() const { return this->composite_id / 1000000; }
     int                 volume_idx() const { return (this->composite_id / 1000) % 1000; }
@@ -282,11 +327,14 @@ public:
 
     void                set_range(coordf_t low, coordf_t high);
     void                render() const;
+    void                render_using_layer_height() const;
     void                finalize_geometry(bool use_VBOs) { this->indexed_vertex_array.finalize_geometry(use_VBOs); }
     void                release_geometry() { this->indexed_vertex_array.release_geometry(); }
 
     /************************************************ Layer height texture ****************************************************/
     std::shared_ptr<GLTexture>  layer_height_texture;
+    // Data to render this volume using the layer height texture
+    LayerHeightTextureData layer_height_texture_data;
 
     bool                has_layer_height_texture() const 
         { return this->layer_height_texture.get() != nullptr; }
@@ -296,11 +344,11 @@ public:
         { return (this->layer_height_texture.get() == nullptr) ? 0 : this->layer_height_texture->height; }
     size_t              layer_height_texture_cells() const 
         { return (this->layer_height_texture.get() == nullptr) ? 0 : this->layer_height_texture->cells; }
-    void*               layer_height_texture_data_ptr_level0() {
+    void*               layer_height_texture_data_ptr_level0() const {
         return (layer_height_texture.get() == nullptr) ? 0 :
             (void*)layer_height_texture->data.data();
     }
-    void*               layer_height_texture_data_ptr_level1() {
+    void*               layer_height_texture_data_ptr_level1() const {
         return (layer_height_texture.get() == nullptr) ? 0 :
             (void*)(layer_height_texture->data.data() + layer_height_texture->width * layer_height_texture->height * 4);
     }
@@ -309,31 +357,24 @@ public:
             double(this->layer_height_texture->cells - 1) / (double(this->layer_height_texture->width) * bounding_box.max.z);
     }
     void                generate_layer_height_texture(PrintObject *print_object, bool force);
+
+    void set_layer_height_texture_data(unsigned int texture_id, unsigned int shader_id, PrintObject* print_object, float z_cursor_relative, float edit_band_width)
+    {
+        layer_height_texture_data.texture_id = texture_id;
+        layer_height_texture_data.shader_id = shader_id;
+        layer_height_texture_data.print_object = print_object;
+        layer_height_texture_data.z_cursor_relative = z_cursor_relative;
+        layer_height_texture_data.edit_band_width = edit_band_width;
+    }
+
+    void reset_layer_height_texture_data() { layer_height_texture_data.reset(); }
 };
 
 class GLVolumeCollection
 {
-public:
-    struct RenderInterleavedOnlyVolumes
-    {
-        bool enabled;
-        float alpha; // [0..1]
-
-        RenderInterleavedOnlyVolumes()
-            : enabled(false)
-            , alpha(0.0f)
-        {
-        }
-
-        RenderInterleavedOnlyVolumes(bool enabled, float alpha)
-            : enabled(enabled)
-            , alpha(alpha)
-        {
-        }
-    };
-
-private:
-    RenderInterleavedOnlyVolumes _render_interleaved_only_volumes;
+    // min and max vertex of the print box volume
+    float print_box_min[3];
+    float print_box_max[3];
 
 public:
     std::vector<GLVolume*> volumes;
@@ -370,7 +411,12 @@ public:
     bool empty() const { return volumes.empty(); }
     void set_range(double low, double high) { for (GLVolume *vol : this->volumes) vol->set_range(low, high); }
 
-    void set_render_interleaved_only_volumes(const RenderInterleavedOnlyVolumes& render_interleaved_only_volumes) { _render_interleaved_only_volumes = render_interleaved_only_volumes; }
+    void set_print_box(float min_x, float min_y, float min_z, float max_x, float max_y, float max_z) {
+        print_box_min[0] = min_x; print_box_min[1] = min_y; print_box_min[2] = min_z;
+        print_box_max[0] = max_x; print_box_max[1] = max_y; print_box_max[2] = max_z;
+    }
+
+    void update_outside_state(const DynamicPrintConfig* config, bool all_inside);
 
     // Returns a vector containing the sorted list of all the print_zs of the volumes contained in this collection
     std::vector<double> get_current_print_zs() const;
@@ -411,27 +457,20 @@ class _3DScene
 
     static GCodePreviewVolumeIndex s_gcode_preview_volume_index;
 
-    class LegendTexture
+    class TextureBase
     {
-        static const unsigned int Px_Title_Offset = 5;
-        static const unsigned int Px_Text_Offset = 5;
-        static const unsigned int Px_Square = 20;
-        static const unsigned int Px_Square_Contour = 1;
-        static const unsigned int Px_Border = Px_Square / 2;
-        static const unsigned char Squares_Border_Color[3];
-        static const unsigned char Background_Color[3];
-        static const unsigned char Opacity;
-
+    protected:
         unsigned int m_tex_id;
         unsigned int m_tex_width;
         unsigned int m_tex_height;
 
+        // generate() fills in m_data with the pixels, while finalize() moves the data to the GPU before rendering.
+        std::vector<unsigned char> m_data;
+
     public:
-        LegendTexture() : m_tex_id(0), m_tex_width(0), m_tex_height(0) {}
-        ~LegendTexture() { _destroy_texture(); }
-        
-        // Generate a texture data, but don't load it into the GPU yet, as the glcontext may not be valid yet.
-        bool generate(const GCodePreviewData& preview_data, const std::vector<float>& tool_colors);
+        TextureBase() : m_tex_id(0), m_tex_width(0), m_tex_height(0) {}
+        virtual ~TextureBase() { _destroy_texture(); }
+
         // If not loaded, load the texture data into the GPU. Return a texture ID or 0 if the texture has zero size.
         unsigned int finalize();
 
@@ -442,26 +481,61 @@ class _3DScene
         void reset_texture() { _destroy_texture(); }
 
     private:
-        bool _create_texture(const GCodePreviewData& preview_data, const wxBitmap& bitmap);
         void _destroy_texture();
-        // generate() fills in m_data with the pixels, while finalize() moves the data to the GPU before rendering.
-        std::vector<unsigned char> m_data;
+    };
+
+    class WarningTexture : public TextureBase
+    {
+        static const unsigned char Background_Color[3];
+        static const unsigned char Opacity;
+
+    public:
+        WarningTexture() : TextureBase() {}
+
+        // Generate a texture data, but don't load it into the GPU yet, as the glcontext may not be valid yet.
+        bool generate(const std::string& msg);
+    };
+
+    class LegendTexture : public TextureBase
+    {
+        static const unsigned int Px_Title_Offset = 5;
+        static const unsigned int Px_Text_Offset = 5;
+        static const unsigned int Px_Square = 20;
+        static const unsigned int Px_Square_Contour = 1;
+        static const unsigned int Px_Border = Px_Square / 2;
+        static const unsigned char Squares_Border_Color[3];
+        static const unsigned char Background_Color[3];
+        static const unsigned char Opacity;
+
+    public:
+        LegendTexture() : TextureBase() {}
+
+        // Generate a texture data, but don't load it into the GPU yet, as the glcontext may not be valid yet.
+        bool generate(const GCodePreviewData& preview_data, const std::vector<float>& tool_colors);
     };
 
     static LegendTexture s_legend_texture;
+    static WarningTexture s_warning_texture;
 
 public:
     static void _glew_init();
 
     static void load_gcode_preview(const Print* print, const GCodePreviewData* preview_data, GLVolumeCollection* volumes, const std::vector<std::string>& str_tool_colors, bool use_VBOs);
 
-    static unsigned int get_legend_texture_id();
     static unsigned int get_legend_texture_width();
     static unsigned int get_legend_texture_height();
 
     static void reset_legend_texture();
     static unsigned int finalize_legend_texture();
 
+    static unsigned int get_warning_texture_width();
+    static unsigned int get_warning_texture_height();
+
+    // generates a warning texture containing the given message
+    static void generate_warning_texture(const std::string& msg);
+    static void reset_warning_texture();
+    static unsigned int finalize_warning_texture();
+
     static void _load_print_toolpaths(
         const Print                     *print,
         GLVolumeCollection              *volumes,
diff --git a/xs/src/slic3r/GUI/BonjourDialog.cpp b/xs/src/slic3r/GUI/BonjourDialog.cpp
new file mode 100644
index 000000000..34fac9a91
--- /dev/null
+++ b/xs/src/slic3r/GUI/BonjourDialog.cpp
@@ -0,0 +1,200 @@
+#include "slic3r/Utils/Bonjour.hpp"   // On Windows, boost needs to be included before wxWidgets headers
+
+#include "BonjourDialog.hpp"
+
+#include <set>
+#include <mutex>
+
+#include <wx/sizer.h>
+#include <wx/button.h>
+#include <wx/listctrl.h>
+#include <wx/stattext.h>
+#include <wx/timer.h>
+
+#include "slic3r/GUI/GUI.hpp"
+#include "slic3r/Utils/Bonjour.hpp"
+
+
+namespace Slic3r {
+
+
+struct BonjourReplyEvent : public wxEvent
+{
+	BonjourReply reply;
+
+	BonjourReplyEvent(wxEventType eventType, int winid, BonjourReply &&reply) :
+		wxEvent(winid, eventType),
+		reply(std::move(reply))
+	{}
+
+	virtual wxEvent *Clone() const
+	{
+		return new BonjourReplyEvent(*this);
+	}
+};
+
+wxDEFINE_EVENT(EVT_BONJOUR_REPLY, BonjourReplyEvent);
+
+wxDECLARE_EVENT(EVT_BONJOUR_COMPLETE, wxCommandEvent);
+wxDEFINE_EVENT(EVT_BONJOUR_COMPLETE, wxCommandEvent);
+
+class ReplySet: public std::set<BonjourReply> {};
+
+struct LifetimeGuard
+{
+	std::mutex mutex;
+	BonjourDialog *dialog;
+
+	LifetimeGuard(BonjourDialog *dialog) : dialog(dialog) {}
+};
+
+
+BonjourDialog::BonjourDialog(wxWindow *parent) :
+	wxDialog(parent, wxID_ANY, _(L("Network lookup"))),
+	list(new wxListView(this, wxID_ANY, wxDefaultPosition, wxSize(800, 300))),
+	replies(new ReplySet),
+	label(new wxStaticText(this, wxID_ANY, "")),
+	timer(new wxTimer()),
+	timer_state(0)
+{
+	wxBoxSizer *vsizer = new wxBoxSizer(wxVERTICAL);
+
+	vsizer->Add(label, 0, wxEXPAND | wxTOP | wxLEFT | wxRIGHT, 10);
+
+	list->SetSingleStyle(wxLC_SINGLE_SEL);
+	list->SetSingleStyle(wxLC_SORT_DESCENDING);
+	list->AppendColumn(_(L("Address")), wxLIST_FORMAT_LEFT, 50);
+	list->AppendColumn(_(L("Hostname")), wxLIST_FORMAT_LEFT, 100);
+	list->AppendColumn(_(L("Service name")), wxLIST_FORMAT_LEFT, 200);
+	list->AppendColumn(_(L("OctoPrint version")), wxLIST_FORMAT_LEFT, 50);
+
+	vsizer->Add(list, 1, wxEXPAND | wxALL, 10);
+
+	wxBoxSizer *button_sizer = new wxBoxSizer(wxHORIZONTAL);
+	button_sizer->Add(new wxButton(this, wxID_OK, "OK"), 0, wxALL, 10);
+	button_sizer->Add(new wxButton(this, wxID_CANCEL, "Cancel"), 0, wxALL, 10);
+	// ^ Note: The Ok/Cancel labels are translated by wxWidgets
+
+	vsizer->Add(button_sizer, 0, wxALIGN_CENTER);
+	SetSizerAndFit(vsizer);
+
+	Bind(EVT_BONJOUR_REPLY, &BonjourDialog::on_reply, this);
+
+	Bind(EVT_BONJOUR_COMPLETE, [this](wxCommandEvent &) {
+		this->timer_state = 0;
+	});
+
+	Bind(wxEVT_TIMER, &BonjourDialog::on_timer, this);
+}
+
+BonjourDialog::~BonjourDialog()
+{
+	// Needed bacuse of forward defs
+}
+
+bool BonjourDialog::show_and_lookup()
+{
+	Show();   // Because we need GetId() to work before ShowModal()
+
+	timer->Stop();
+	timer->SetOwner(this);
+	timer_state = 1;
+	timer->Start(1000);
+	wxTimerEvent evt_dummy;
+	on_timer(evt_dummy);
+
+	// The background thread needs to queue messages for this dialog
+	// and for that it needs a valid pointer to it (mandated by the wxWidgets API).
+	// Here we put the pointer under a shared_ptr and protect it by a mutex,
+	// so that both threads can access it safely.
+	auto dguard = std::make_shared<LifetimeGuard>(this);
+
+	bonjour = std::move(Bonjour("octoprint")
+		.set_retries(3)
+		.set_timeout(4)
+		.on_reply([dguard](BonjourReply &&reply) {
+			std::lock_guard<std::mutex> lock_guard(dguard->mutex);
+			auto dialog = dguard->dialog;
+			if (dialog != nullptr) {
+				auto evt = new BonjourReplyEvent(EVT_BONJOUR_REPLY, dialog->GetId(), std::move(reply));
+				wxQueueEvent(dialog, evt);
+			}
+		})
+		.on_complete([dguard]() {
+			std::lock_guard<std::mutex> lock_guard(dguard->mutex);
+			auto dialog = dguard->dialog;
+			if (dialog != nullptr) {
+				auto evt = new wxCommandEvent(EVT_BONJOUR_COMPLETE, dialog->GetId());
+				wxQueueEvent(dialog, evt);
+			}
+		})
+		.lookup()
+	);
+
+	bool res = ShowModal() == wxID_OK && list->GetFirstSelected() >= 0;
+	{
+		// Tell the background thread the dialog is going away...
+		std::lock_guard<std::mutex> lock_guard(dguard->mutex);
+		dguard->dialog = nullptr;
+	}
+	return res;
+}
+
+wxString BonjourDialog::get_selected() const
+{
+	auto sel = list->GetFirstSelected();
+	return sel >= 0 ? list->GetItemText(sel) : wxString();
+}
+
+
+// Private
+
+void BonjourDialog::on_reply(BonjourReplyEvent &e)
+{
+	if (replies->find(e.reply) != replies->end()) {
+		// We already have this reply
+		return;
+	}
+
+	replies->insert(std::move(e.reply));
+
+	auto selected = get_selected();
+	list->DeleteAllItems();
+
+	// The whole list is recreated so that we benefit from it already being sorted in the set.
+	// (And also because wxListView's sorting API is bananas.)
+	for (const auto &reply : *replies) {
+		auto item = list->InsertItem(0, reply.full_address);
+		list->SetItem(item, 1, reply.hostname);
+		list->SetItem(item, 2, reply.service_name);
+		list->SetItem(item, 3, reply.version);
+	}
+
+	for (int i = 0; i < 4; i++) {
+		this->list->SetColumnWidth(i, wxLIST_AUTOSIZE);
+		if (this->list->GetColumnWidth(i) < 100) { this->list->SetColumnWidth(i, 100); }
+	}
+
+	if (!selected.IsEmpty()) {
+		// Attempt to preserve selection
+		auto hit = list->FindItem(-1, selected);
+		if (hit >= 0) { list->SetItemState(hit, wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED); }
+	}
+}
+
+void BonjourDialog::on_timer(wxTimerEvent &)
+{
+	const auto search_str = _(L("Searching for devices"));
+
+	if (timer_state > 0) {
+		const std::string dots(timer_state, '.');
+		label->SetLabel(wxString::Format("%s %s", search_str, dots));
+		timer_state = (timer_state) % 3 + 1;
+	} else {
+		label->SetLabel(wxString::Format("%s: %s", search_str, _(L("Finished."))));
+		timer->Stop();
+	}
+}
+
+
+}
diff --git a/xs/src/slic3r/GUI/BonjourDialog.hpp b/xs/src/slic3r/GUI/BonjourDialog.hpp
new file mode 100644
index 000000000..e3f53790b
--- /dev/null
+++ b/xs/src/slic3r/GUI/BonjourDialog.hpp
@@ -0,0 +1,49 @@
+#ifndef slic3r_BonjourDialog_hpp_
+#define slic3r_BonjourDialog_hpp_
+
+#include <memory>
+
+#include <wx/dialog.h>
+
+class wxListView;
+class wxStaticText;
+class wxTimer;
+class wxTimerEvent;
+
+
+namespace Slic3r {
+
+class Bonjour;
+class BonjourReplyEvent;
+class ReplySet;
+
+
+class BonjourDialog: public wxDialog
+{
+public:
+	BonjourDialog(wxWindow *parent);
+	BonjourDialog(BonjourDialog &&) = delete;
+	BonjourDialog(const BonjourDialog &) = delete;
+	BonjourDialog &operator=(BonjourDialog &&) = delete;
+	BonjourDialog &operator=(const BonjourDialog &) = delete;
+	~BonjourDialog();
+
+	bool show_and_lookup();
+	wxString get_selected() const;
+private:
+	wxListView *list;
+	std::unique_ptr<ReplySet> replies;
+	wxStaticText *label;
+	std::shared_ptr<Bonjour> bonjour;
+	std::unique_ptr<wxTimer> timer;
+	unsigned timer_state;
+
+	void on_reply(BonjourReplyEvent &);
+	void on_timer(wxTimerEvent &);
+};
+
+
+
+}
+
+#endif
diff --git a/xs/src/slic3r/GUI/Field.cpp b/xs/src/slic3r/GUI/Field.cpp
index 045c55d96..c2fc5e4e4 100644
--- a/xs/src/slic3r/GUI/Field.cpp
+++ b/xs/src/slic3r/GUI/Field.cpp
@@ -18,6 +18,17 @@ namespace Slic3r { namespace GUI {
 			wxNumberFormatter::ToString(value, precision, wxNumberFormatter::Style_None);
 	}
 
+	void Field::PostInitialize(){
+		m_Undo_btn = new wxButton(m_parent, wxID_ANY, "", wxDefaultPosition, wxDefaultSize, wxBU_EXACTFIT | wxNO_BORDER);
+		// use bouth of temporary_icons till don't have "undo_icon" 
+		auto color = wxSystemSettings::GetColour(wxSYS_COLOUR_WINDOW);
+		if (wxMSW) m_Undo_btn->SetBackgroundColour(color);
+		m_Undo_btn->SetBitmap(wxBitmap(from_u8(var("bullet_white.png")), wxBITMAP_TYPE_PNG));
+		m_Undo_btn->Bind(wxEVT_BUTTON, ([this](wxCommandEvent){ on_back_to_initial_value(); }));
+
+		BUILD();
+	}
+
 	void Field::on_kill_focus(wxEvent& event) {
         // Without this, there will be nasty focus bugs on Windows.
         // Also, docs for wxEvent::Skip() say "In general, it is recommended to skip all 
@@ -34,6 +45,12 @@ namespace Slic3r { namespace GUI {
             m_on_change(m_opt_id, get_value());
     }
 
+	void Field::on_back_to_initial_value()
+	{
+		if (m_back_to_initial_value != nullptr && m_is_modified_value)
+			m_back_to_initial_value(m_opt_id);
+	}
+
 	wxString Field::get_tooltip_text(const wxString& default_string)
 	{
 		wxString tooltip_text("");
@@ -187,6 +204,17 @@ void CheckBox::BUILD() {
 	window = dynamic_cast<wxWindow*>(temp);
 }
 
+boost::any CheckBox::get_value()
+{
+	boost::any ret_val;
+	bool value = dynamic_cast<wxCheckBox*>(window)->GetValue();
+	if (m_opt.type == coBool)
+		ret_val = static_cast<bool>(value);
+	else
+		ret_val = static_cast<unsigned char>(value);
+ 	return ret_val;
+}
+
 int undef_spin_val = -9999;		//! Probably, It's not necessary
 
 void SpinCtrl::BUILD() {
@@ -217,8 +245,13 @@ void SpinCtrl::BUILD() {
 		break;
 	}
 
+	const int min_val = m_opt_id == "standby_temperature_delta" ? 
+						-500 : m_opt.min > 0 ? 
+						m_opt.min : 0;
+	const int max_val = m_opt.max < 2147483647 ? m_opt.max : 2147483647;
+
 	auto temp = new wxSpinCtrl(m_parent, wxID_ANY, text_value, wxDefaultPosition, size,
-		0, m_opt.min >0 ? m_opt.min : 0, m_opt.max < 2147483647 ? m_opt.max : 2147483647, default_value);
+		0, min_val, max_val, default_value);
 
 	temp->Bind(wxEVT_SPINCTRL, ([this](wxCommandEvent e) { tmp_value = undef_spin_val; on_change_field(); }), temp->GetId());
 	temp->Bind(wxEVT_KILL_FOCUS, ([this](wxEvent& e) { tmp_value = undef_spin_val; on_kill_focus(e); }), temp->GetId());
@@ -228,7 +261,7 @@ void SpinCtrl::BUILD() {
 // 		# when it was changed from the text control, so the on_change callback
 // 		# gets the old one, and on_kill_focus resets the control to the old value.
 // 		# As a workaround, we get the new value from $event->GetString and store
-// 		# here temporarily so that we can return it from $self->get_value
+// 		# here temporarily so that we can return it from $self->get_value
 		std::string value = e.GetString().utf8_str().data();
 		if (is_matched(value, "^\\d+$"))
 			tmp_value = std::stoi(value);
@@ -261,8 +294,10 @@ void Choice::BUILD() {
 	if (m_opt.enum_labels.empty() && m_opt.enum_values.empty()){
 	}
 	else{
-		for (auto el : m_opt.enum_labels.empty() ? m_opt.enum_values : m_opt.enum_labels)
-			temp->Append(wxString(el));
+		for (auto el : m_opt.enum_labels.empty() ? m_opt.enum_values : m_opt.enum_labels){
+			const wxString& str = m_opt_id == "support" ? L_str(el) : el;
+			temp->Append(str);
+		}
 		set_selection();
 	}
  	temp->Bind(wxEVT_TEXT, ([this](wxCommandEvent e) { on_change_field(); }), temp->GetId());
@@ -330,9 +365,9 @@ void Choice::set_selection()
 	}
 }
 
-void Choice::set_value(const std::string value)  //! Redundant?
+void Choice::set_value(const std::string value, bool change_event)  //! Redundant?
 {
-	m_disable_change_event = true;
+	m_disable_change_event = !change_event;
 
 	size_t idx=0;
 	for (auto el : m_opt.enum_values)
@@ -349,9 +384,9 @@ void Choice::set_value(const std::string value)  //! Redundant?
 	m_disable_change_event = false;
 }
 
-void Choice::set_value(boost::any value)
+void Choice::set_value(boost::any value, bool change_event)
 {
-	m_disable_change_event = true;
+	m_disable_change_event = !change_event;
 
 	switch (m_opt.type){
 	case coInt:
@@ -394,7 +429,7 @@ void Choice::set_values(const std::vector<std::string> values)
 		return;
 	m_disable_change_event = true;
 
-// 	# it looks that Clear() also clears the text field in recent wxWidgets versions,
+// 	# it looks that Clear() also clears the text field in recent wxWidgets versions,
 // 	# but we want to preserve it
 	auto ww = dynamic_cast<wxComboBox*>(window);
 	auto value = ww->GetValue();
@@ -411,6 +446,9 @@ boost::any Choice::get_value()
 	boost::any ret_val;
 	wxString ret_str = static_cast<wxComboBox*>(window)->GetValue();	
 
+	if (m_opt_id == "support")
+		return ret_str;
+
 	if (m_opt.type != coEnum)
 		ret_val = get_value_by_opt_type(ret_str);
 	else
@@ -503,9 +541,9 @@ void PointCtrl::BUILD()
 	y_textctrl->SetToolTip(get_tooltip_text(X+", "+Y));
 }
 
-void PointCtrl::set_value(const Pointf value)
+void PointCtrl::set_value(const Pointf value, bool change_event)
 {
-	m_disable_change_event = true;
+	m_disable_change_event = !change_event;
 
 	double val = value.x;
 	x_textctrl->SetValue(val - int(val) == 0 ? wxString::Format(_T("%i"), int(val)) : wxNumberFormatter::ToString(val, 2, wxNumberFormatter::Style_None));
@@ -515,7 +553,7 @@ void PointCtrl::set_value(const Pointf value)
 	m_disable_change_event = false;
 }
 
-void PointCtrl::set_value(boost::any value)
+void PointCtrl::set_value(boost::any value, bool change_event)
 {
 	Pointf pt;
 	Pointf *ptf = boost::any_cast<Pointf>(&value);
@@ -541,7 +579,7 @@ void PointCtrl::set_value(boost::any value)
 // 			return;
 // 		}		
 // 	}	
-	set_value(pt);
+	set_value(pt, change_event);
 }
 
 boost::any PointCtrl::get_value()
diff --git a/xs/src/slic3r/GUI/Field.hpp b/xs/src/slic3r/GUI/Field.hpp
index 492629b41..2ddb5d9f8 100644
--- a/xs/src/slic3r/GUI/Field.hpp
+++ b/xs/src/slic3r/GUI/Field.hpp
@@ -18,6 +18,13 @@
 
 //#include "slic3r_gui.hpp"
 #include "GUI.hpp"
+#include "Utils.hpp"
+
+#ifdef __WXMSW__
+#define wxMSW true
+#else
+#define wxMSW false
+#endif
 
 namespace Slic3r { namespace GUI {
 
@@ -25,13 +32,14 @@ class Field;
 using t_field = std::unique_ptr<Field>;
 using t_kill_focus = std::function<void()>;
 using t_change = std::function<void(t_config_option_key, boost::any)>;
+using t_back_to_init = std::function<void(std::string)>;
 
 wxString double_to_string(double const value);
 
 class Field {
 protected:
     // factory function to defer and enforce creation of derived type. 
-    virtual void	PostInitialize() { BUILD(); }
+	virtual void	PostInitialize();
     
     /// Finish constructing the Field's wxWidget-related properties, including setting its own sizer, etc.
     virtual void	BUILD() = 0;
@@ -42,6 +50,8 @@ protected:
 	void			on_kill_focus(wxEvent& event);
     /// Call the attached on_change method. 
     void			on_change_field();
+    /// Call the attached m_back_to_initial_value method. 
+	void			on_back_to_initial_value();
 
 public:
     /// parent wx item, opportunity to refactor (probably not necessary - data duplication)
@@ -53,8 +63,13 @@ public:
     /// Function object to store callback passed in from owning object.
 	t_change		m_on_change {nullptr};
 
+    /// Function object to store callback passed in from owning object.
+	t_back_to_init	m_back_to_initial_value{ nullptr };
+
 	// This is used to avoid recursive invocation of the field change/update by wxWidgets.
     bool			m_disable_change_event {false};
+	// This is used to avoid recursive invocation of the field change/update by wxWidgets.
+    bool			m_is_modified_value {false};
 
     /// Copy of ConfigOption for deduction purposes
     const ConfigOptionDef			m_opt {ConfigOptionDef()};
@@ -63,7 +78,7 @@ public:
     /// Sets a value for this control.
     /// subclasses should overload with a specific version
     /// Postcondition: Method does not fire the on_change event.
-    virtual void		set_value(boost::any value) = 0;
+    virtual void		set_value(boost::any value, bool change_event) = 0;
     
     /// Gets a boost::any representing this control.
     /// subclasses should overload with a specific version
@@ -72,6 +87,9 @@ public:
     virtual void		enable() = 0;
     virtual void		disable() = 0;
 
+	wxStaticText*		m_Label = nullptr;
+	wxButton*			m_Undo_btn = nullptr;
+
     /// Fires the enable or disable function, based on the input.
     inline void			toggle(bool en) { en ? enable() : disable(); }
 
@@ -85,7 +103,7 @@ public:
     virtual wxWindow*	getWindow() { return nullptr; }
 
 	bool		is_matched(std::string string, std::string pattern);
-	boost::any get_value_by_opt_type(wxString str);
+	boost::any	get_value_by_opt_type(wxString str);
 
     /// Factory method for generating new derived classes.
     template<class T>
@@ -116,13 +134,13 @@ public:
     void BUILD();
     wxWindow* window {nullptr};
 
-    virtual void	set_value(std::string value) {
-		m_disable_change_event = true;
+    virtual void	set_value(std::string value, bool change_event = false) {
+		m_disable_change_event = !change_event;
         dynamic_cast<wxTextCtrl*>(window)->SetValue(wxString(value));
 		m_disable_change_event = false;
     }
-    virtual void	set_value(boost::any value) {
-		m_disable_change_event = true;
+    virtual void	set_value(boost::any value, bool change_event = false) {
+		m_disable_change_event = !change_event;
 		dynamic_cast<wxTextCtrl*>(window)->SetValue(boost::any_cast<wxString>(value));
 		m_disable_change_event = false;
     }
@@ -143,19 +161,17 @@ public:
 	wxWindow*		window{ nullptr };
 	void			BUILD() override;
 
-	void			set_value(const bool value) {
-		m_disable_change_event = true;
+	void			set_value(const bool value, bool change_event = false) {
+		m_disable_change_event = !change_event;
 		dynamic_cast<wxCheckBox*>(window)->SetValue(value);
 		m_disable_change_event = false;
 	}
-	void			set_value(boost::any value) {
-		m_disable_change_event = true;
+	void			set_value(boost::any value, bool change_event = false) {
+		m_disable_change_event = !change_event;
 		dynamic_cast<wxCheckBox*>(window)->SetValue(boost::any_cast<bool>(value));
 		m_disable_change_event = false;
 	}
-	boost::any		get_value() override {
-		return boost::any(dynamic_cast<wxCheckBox*>(window)->GetValue());
-	}
+	boost::any		get_value() override;
 
 	void			enable() override { dynamic_cast<wxCheckBox*>(window)->Enable(); }
 	void			disable() override { dynamic_cast<wxCheckBox*>(window)->Disable(); }
@@ -173,13 +189,13 @@ public:
 	wxWindow*		window{ nullptr };
 	void			BUILD() override;
 
-	void			set_value(const std::string value) {
-		m_disable_change_event = true;
+	void			set_value(const std::string value, bool change_event = false) {
+		m_disable_change_event = !change_event;
 		dynamic_cast<wxSpinCtrl*>(window)->SetValue(value);
 		m_disable_change_event = false;
 	}
-	void			set_value(boost::any value) {
-		m_disable_change_event = true;
+	void			set_value(boost::any value, bool change_event = false) {
+		m_disable_change_event = !change_event;
 		dynamic_cast<wxSpinCtrl*>(window)->SetValue(boost::any_cast<int>(value));
 		m_disable_change_event = false;
 	}
@@ -202,8 +218,8 @@ public:
 	void			BUILD() override;
 
 	void			set_selection();
-	void			set_value(const std::string value);
-	void			set_value(boost::any value);
+	void			set_value(const std::string value, bool change_event = false);
+	void			set_value(boost::any value, bool change_event = false);
 	void			set_values(const std::vector<std::string> values);
 	boost::any		get_value() override;
 
@@ -221,13 +237,13 @@ public:
 	wxWindow*		window{ nullptr };
 	void			BUILD()  override;
 
-	void			set_value(const std::string value) {
-		m_disable_change_event = true;
+	void			set_value(const std::string value, bool change_event = false) {
+		m_disable_change_event = !change_event;
 		dynamic_cast<wxColourPickerCtrl*>(window)->SetColour(value);
 		m_disable_change_event = false;
 	 	}
-	void			set_value(boost::any value) {
-		m_disable_change_event = true;
+	void			set_value(boost::any value, bool change_event = false) {
+		m_disable_change_event = !change_event;
 		dynamic_cast<wxColourPickerCtrl*>(window)->SetColour(boost::any_cast<wxString>(value));
 		m_disable_change_event = false;
 	}
@@ -251,8 +267,8 @@ public:
 
 	void			BUILD()  override;
 
-	void			set_value(const Pointf value);
-	void			set_value(boost::any value);
+	void			set_value(const Pointf value, bool change_event = false);
+	void			set_value(boost::any value, bool change_event = false);
 	boost::any		get_value() override;
 
 	void			enable() override {
diff --git a/xs/src/slic3r/GUI/GUI.cpp b/xs/src/slic3r/GUI/GUI.cpp
index 6b8613cb0..0410b7969 100644
--- a/xs/src/slic3r/GUI/GUI.cpp
+++ b/xs/src/slic3r/GUI/GUI.cpp
@@ -45,6 +45,7 @@
 #include "AppConfig.hpp"
 #include "Utils.hpp"
 #include "Preferences.hpp"
+#include "PresetBundle.hpp"
 
 namespace Slic3r { namespace GUI {
 
@@ -172,11 +173,15 @@ wxApp       *g_wxApp        = nullptr;
 wxFrame     *g_wxMainFrame  = nullptr;
 wxNotebook  *g_wxTabPanel   = nullptr;
 AppConfig	*g_AppConfig	= nullptr;
+PresetBundle *g_PresetBundle= nullptr;
 
 std::vector<Tab *> g_tabs_list;
 
 wxLocale*	g_wxLocale;
 
+std::shared_ptr<ConfigOptionsGroup>	m_optgroup;
+double m_brim_width = 0.0;
+
 void set_wxapp(wxApp *app)
 {
     g_wxApp = app;
@@ -197,6 +202,11 @@ void set_app_config(AppConfig *app_config)
 	g_AppConfig = app_config;
 }
 
+void set_preset_bundle(PresetBundle *preset_bundle)
+{
+	g_PresetBundle = preset_bundle;
+}
+
 std::vector<Tab *>& get_tabs_list()
 {
 	return g_tabs_list;
@@ -240,6 +250,7 @@ bool select_language(wxArrayString & names,
 		g_wxLocale->Init(identifiers[index]);
 		g_wxLocale->AddCatalogLookupPathPrefix(wxPathOnly(localization_dir()));
 		g_wxLocale->AddCatalog(g_wxApp->GetAppName());
+		wxSetlocale(LC_NUMERIC, "C");
 		return true;
 	}
 	return false;
@@ -268,6 +279,7 @@ bool load_language()
 			g_wxLocale->Init(identifiers[i]);
 			g_wxLocale->AddCatalogLookupPathPrefix(wxPathOnly(localization_dir()));
 			g_wxLocale->AddCatalog(g_wxApp->GetAppName());
+			wxSetlocale(LC_NUMERIC, "C");
 			return true;
 		}
 	}
@@ -346,26 +358,17 @@ void open_preferences_dialog(int event_preferences)
 	dlg->ShowModal();
 }
 
-void create_preset_tabs(PresetBundle *preset_bundle,
-						bool no_controller, bool is_disabled_button_browse, bool is_user_agent,
-						int event_value_change, int event_presets_changed,
-						int event_button_browse, int event_button_test)
+void create_preset_tabs(bool no_controller, int event_value_change, int event_presets_changed)
 {	
-	add_created_tab(new TabPrint	(g_wxTabPanel, no_controller), preset_bundle);
-	add_created_tab(new TabFilament	(g_wxTabPanel, no_controller), preset_bundle);
-	add_created_tab(new TabPrinter	(g_wxTabPanel, no_controller, is_disabled_button_browse, is_user_agent), 
-					preset_bundle);
+	add_created_tab(new TabPrint	(g_wxTabPanel, no_controller));
+	add_created_tab(new TabFilament	(g_wxTabPanel, no_controller));
+	add_created_tab(new TabPrinter	(g_wxTabPanel, no_controller));
 	for (size_t i = 0; i < g_wxTabPanel->GetPageCount(); ++ i) {
 		Tab *tab = dynamic_cast<Tab*>(g_wxTabPanel->GetPage(i));
 		if (! tab)
 			continue;
 		tab->set_event_value_change(wxEventType(event_value_change));
 		tab->set_event_presets_changed(wxEventType(event_presets_changed));
-		if (tab->name() == "printer"){
-			TabPrinter* tab_printer = static_cast<TabPrinter*>(tab);
-			tab_printer->set_event_button_browse(wxEventType(event_button_browse));
-			tab_printer->set_event_button_test(wxEventType(event_button_test));
-		}
 	}
 }
 
@@ -419,9 +422,13 @@ void change_opt_value(DynamicPrintConfig& config, t_config_option_key opt_key, b
 			config.set_key_value(opt_key, new ConfigOptionString(boost::any_cast<std::string>(value)));
 			break;
 		case coStrings:{
-			if (opt_key.compare("compatible_printers") == 0){
+			if (opt_key.compare("compatible_printers") == 0 ||
+				config.def()->get(opt_key)->gui_flags.compare("serialized") == 0){
 				config.option<ConfigOptionStrings>(opt_key)->values.resize(0);
-				for (auto el : boost::any_cast<std::vector<std::string>>(value))
+				std::vector<std::string> values = boost::any_cast<std::vector<std::string>>(value);
+				if (values.size() == 1 && values[0] == "")
+					break;
+				for (auto el : values)
 					config.option<ConfigOptionStrings>(opt_key)->values.push_back(el);
 			}
 			else{
@@ -434,7 +441,7 @@ void change_opt_value(DynamicPrintConfig& config, t_config_option_key opt_key, b
 			config.set_key_value(opt_key, new ConfigOptionBool(boost::any_cast<bool>(value)));
 			break;
 		case coBools:{
-			ConfigOptionBools* vec_new = new ConfigOptionBools{ boost::any_cast<bool>(value) };
+			ConfigOptionBools* vec_new = new ConfigOptionBools{ (bool)boost::any_cast<unsigned char>(value) };
 			config.option<ConfigOptionBools>(opt_key)->set_at(vec_new, opt_index, 0);
 			break;}
 		case coInt:
@@ -458,9 +465,8 @@ void change_opt_value(DynamicPrintConfig& config, t_config_option_key opt_key, b
 			}
 			break;
 		case coPoints:{
-			ConfigOptionPoints points;
-			points.values = boost::any_cast<std::vector<Pointf>>(value);
-			config.set_key_value(opt_key, new ConfigOptionPoints(points));
+			ConfigOptionPoints* vec_new = new ConfigOptionPoints{ boost::any_cast<Pointf>(value) };
+			config.option<ConfigOptionPoints>(opt_key)->set_at(vec_new, opt_index, 0);
 			}
 			break;
 		case coNone:
@@ -475,9 +481,9 @@ void change_opt_value(DynamicPrintConfig& config, t_config_option_key opt_key, b
 	}
 }
 
-void add_created_tab(Tab* panel, PresetBundle *preset_bundle)
+void add_created_tab(Tab* panel)
 {
-	panel->create_preset_tab(preset_bundle);
+	panel->create_preset_tab(g_PresetBundle);
 
 	// Load the currently selected preset into the GUI, update the preset selection box.
 	panel->load_current_preset();
@@ -505,6 +511,11 @@ wxApp* get_app(){
 	return g_wxApp;
 }
 
+wxColour* get_modified_label_clr()
+{
+	return new wxColour(253, 88, 0);
+}
+
 void create_combochecklist(wxComboCtrl* comboCtrl, std::string text, std::string items, bool initial_value)
 {
     if (comboCtrl == nullptr)
@@ -562,29 +573,117 @@ AppConfig* get_app_config()
 	return g_AppConfig;
 }
 
-wxString L_str(std::string str)
+wxString L_str(const std::string &str)
 {
 	//! Explicitly specify that the source string is already in UTF-8 encoding
 	return wxGetTranslation(wxString(str.c_str(), wxConvUTF8));
 }
 
-wxString from_u8(std::string str)
+wxString from_u8(const std::string &str)
 {
 	return wxString::FromUTF8(str.c_str());
 }
 
-wxWindow *get_widget_by_id(int id)
+
+void add_frequently_changed_parameters(wxWindow* parent, wxBoxSizer* sizer, wxFlexGridSizer* preset_sizer)
 {
-    if (g_wxMainFrame == nullptr) {
-        throw std::runtime_error("Main frame not set");
-    }
+	DynamicPrintConfig*	config = &g_PresetBundle->prints.get_edited_preset().config;
+	m_optgroup = std::make_shared<ConfigOptionsGroup>(parent, "", config);
+	const wxArrayInt& ar = preset_sizer->GetColWidths();
+	m_optgroup->label_width = ar.IsEmpty() ? 100 : ar.front();
+	m_optgroup->m_on_change = [config](t_config_option_key opt_key, boost::any value){
+		TabPrint* tab_print = nullptr;
+		for (size_t i = 0; i < g_wxTabPanel->GetPageCount(); ++i) {
+			Tab *tab = dynamic_cast<Tab*>(g_wxTabPanel->GetPage(i));
+			if (!tab)
+				continue;
+			if (tab->name() == "print"){
+				tab_print = static_cast<TabPrint*>(tab);
+				break;
+			}
+		}
+		if (tab_print == nullptr)
+			return;
 
-    wxWindow *window = g_wxMainFrame->FindWindow(id);
-    if (window == nullptr) {
-        throw std::runtime_error((boost::format("Could not find widget by ID: %1%") % id).str());
-    }
+		if (opt_key == "fill_density"){
+			value = m_optgroup->get_config_value(*config, opt_key);
+			tab_print->set_value(opt_key, value);
+			tab_print->update();
+		}
+		else{
+			DynamicPrintConfig new_conf = *config;
+			if (opt_key == "brim"){
+				double new_val;
+				double brim_width = config->opt_float("brim_width");
+				if (boost::any_cast<bool>(value) == true)
+				{
+					new_val = m_brim_width == 0.0 ? 10 :
+						m_brim_width < 0.0 ? m_brim_width * (-1) :
+						m_brim_width;
+				}
+				else{
+					m_brim_width = brim_width * (-1);
+					new_val = 0;
+				}
+				new_conf.set_key_value("brim_width", new ConfigOptionFloat(new_val));
+			}
+			else{ //(opt_key == "support")
+				const wxString& selection = boost::any_cast<wxString>(value);
+				
+				auto support_material = selection == _("None") ? false : true;
+				new_conf.set_key_value("support_material", new ConfigOptionBool(support_material));
 
-    return window;
+				if (selection == _("Everywhere"))
+					new_conf.set_key_value("support_material_buildplate_only", new ConfigOptionBool(false));
+				else if (selection == _("Support on build plate only"))
+					new_conf.set_key_value("support_material_buildplate_only", new ConfigOptionBool(true));				
+			}
+			tab_print->load_config(new_conf);
+		}
+
+		tab_print->update_dirty();
+	};
+
+	const int width = 250;
+	Option option = m_optgroup->get_option("fill_density");
+	option.opt.sidetext = "";
+	option.opt.width = width;
+	m_optgroup->append_single_option_line(option);
+
+	ConfigOptionDef def;
+
+	def.label = L("Support");
+	def.type = coStrings;
+	def.gui_type = "select_open";
+	def.tooltip = L("Select what kind of support do you need");
+	def.enum_labels.push_back(L("None"));
+	def.enum_labels.push_back(L("Support on build plate only"));
+	def.enum_labels.push_back(L("Everywhere"));
+	std::string selection = !config->opt_bool("support_material") ?
+		"None" :
+		config->opt_bool("support_material_buildplate_only") ?
+		"Support on build plate only" :
+		"Everywhere";
+	def.default_value = new ConfigOptionStrings { selection };
+	option = Option(def, "support");
+	option.opt.width = width;
+	m_optgroup->append_single_option_line(option);
+
+	m_brim_width = config->opt_float("brim_width");
+	def.label = L("Brim");
+	def.type = coBool;
+	def.tooltip = L("This flag enables the brim that will be printed around each object on the first layer.");
+	def.gui_type = "";
+	def.default_value = new ConfigOptionBool{ m_brim_width > 0.0 ? true : false };
+	option = Option(def, "brim");
+	m_optgroup->append_single_option_line(option);
+
+	sizer->Add(m_optgroup->sizer, 0, wxEXPAND | wxBOTTOM | wxBottom, 1);
+}
+
+ConfigOptionsGroup* get_optgroup()
+{
+	return m_optgroup.get();
 }
 
 } }
diff --git a/xs/src/slic3r/GUI/GUI.hpp b/xs/src/slic3r/GUI/GUI.hpp
index d9760ebf3..084b6de46 100644
--- a/xs/src/slic3r/GUI/GUI.hpp
+++ b/xs/src/slic3r/GUI/GUI.hpp
@@ -15,6 +15,9 @@ class wxComboCtrl;
 class wxString;
 class wxArrayString;
 class wxArrayLong;
+class wxColour;
+class wxBoxSizer;
+class wxFlexGridSizer;
 
 namespace Slic3r { 
 
@@ -36,11 +39,12 @@ class TabIface;
 #define _CHB(s) wxGetTranslation(wxString(s, wxConvUTF8)).utf8_str()
 
 // Minimal buffer length for translated string (char buf[MIN_BUF_LENGTH_FOR_L])
-#define MIN_BUF_LENGTH_FOR_L	128
+#define MIN_BUF_LENGTH_FOR_L	512
 
 namespace GUI {
 
 class Tab;
+class ConfigOptionsGroup;
 // Map from an file_type name to full file wildcard name.
 typedef std::map<std::string, std::string> t_file_wild_card;
 inline t_file_wild_card& get_file_wild_card() {
@@ -70,9 +74,11 @@ void set_wxapp(wxApp *app);
 void set_main_frame(wxFrame *main_frame);
 void set_tab_panel(wxNotebook *tab_panel);
 void set_app_config(AppConfig *app_config);
+void set_preset_bundle(PresetBundle *preset_bundle);
 
 AppConfig*	get_app_config();
 wxApp*		get_app();
+wxColour*	get_modified_label_clr();
 
 void add_debug_menu(wxMenuBar *menu, int event_language_change);
 
@@ -80,14 +86,11 @@ void add_debug_menu(wxMenuBar *menu, int event_language_change);
 void open_preferences_dialog(int event_preferences);
 
 // Create a new preset tab (print, filament and printer),
-void create_preset_tabs(PresetBundle *preset_bundle, 
-						bool no_controller, bool is_disabled_button_browse,	bool is_user_agent,
-						int event_value_change, int event_presets_changed,
-						int event_button_browse, int event_button_test);
+void create_preset_tabs(bool no_controller, int event_value_change, int event_presets_changed);
 TabIface* get_preset_tab_iface(char *name);
 
 // add it at the end of the tab panel.
-void add_created_tab(Tab* panel, PresetBundle *preset_bundle);
+void add_created_tab(Tab* panel);
 // Change option value in config
 void change_opt_value(DynamicPrintConfig& config, t_config_option_key opt_key, boost::any value, int opt_index = 0);
 
@@ -118,11 +121,14 @@ void create_combochecklist(wxComboCtrl* comboCtrl, std::string text, std::string
 int combochecklist_get_flags(wxComboCtrl* comboCtrl);
 
 // Return translated std::string as a wxString
-wxString	L_str(std::string str);
+wxString	L_str(const std::string &str);
 // Return wxString from std::string in UTF8
-wxString	from_u8(std::string str);
+wxString	from_u8(const std::string &str);
 
-wxWindow *get_widget_by_id(int id);
+
+void add_frequently_changed_parameters(wxWindow* parent, wxBoxSizer* sizer, wxFlexGridSizer* preset_sizer);
+
+ConfigOptionsGroup* get_optgroup();
 
 }
 }
diff --git a/xs/src/slic3r/GUI/OptionsGroup.cpp b/xs/src/slic3r/GUI/OptionsGroup.cpp
index f88b3f8c0..0be24824c 100644
--- a/xs/src/slic3r/GUI/OptionsGroup.cpp
+++ b/xs/src/slic3r/GUI/OptionsGroup.cpp
@@ -3,18 +3,21 @@
 
 #include <utility>
 #include <wx/numformatter.h>
+#include <boost/algorithm/string/split.hpp>
+#include <boost/algorithm/string/classification.hpp>
+#include "Utils.hpp"
 
 namespace Slic3r { namespace GUI {
 
-const t_field& OptionsGroup::build_field(const Option& opt) {
-    return build_field(opt.opt_id, opt.opt);
+const t_field& OptionsGroup::build_field(const Option& opt, wxStaticText* label/* = nullptr*/) {
+    return build_field(opt.opt_id, opt.opt, label);
 }
-const t_field& OptionsGroup::build_field(const t_config_option_key& id) {
+const t_field& OptionsGroup::build_field(const t_config_option_key& id, wxStaticText* label/* = nullptr*/) {
 	const ConfigOptionDef& opt = m_options.at(id).opt;
-    return build_field(id, opt);
+    return build_field(id, opt, label);
 }
 
-const t_field& OptionsGroup::build_field(const t_config_option_key& id, const ConfigOptionDef& opt) {
+const t_field& OptionsGroup::build_field(const t_config_option_key& id, const ConfigOptionDef& opt, wxStaticText* label/* = nullptr*/) {
     // Check the gui_type field first, fall through
     // is the normal type.
     if (opt.gui_type.compare("select") == 0) {
@@ -72,7 +75,16 @@ const t_field& OptionsGroup::build_field(const t_config_option_key& id, const Co
 				this->on_kill_focus();
 	};
     field->m_parent = parent();
-    // assign function objects for callbacks, etc.
+	
+	//! Label to change background color, when option is modified
+	field->m_Label = label;
+	field->m_back_to_initial_value = [this](std::string opt_id){
+		if (!this->m_disabled)
+			this->back_to_initial_value(opt_id);
+	};
+	if (!m_is_tab_opt) field->m_Undo_btn->Hide();
+    
+	// assign function objects for callbacks, etc.
     return field;
 }
 
@@ -100,6 +112,7 @@ void OptionsGroup::append_line(const Line& line) {
 		const auto& option = option_set.front();
 		const auto& field = build_field(option);
 
+		sizer->Add(field->m_Undo_btn);
 		if (is_window_field(field))
 			sizer->Add(field->getWindow(), 0, wxEXPAND | wxALL, wxOSX ? 0 : 5);
 		if (is_sizer_field(field))
@@ -110,8 +123,9 @@ void OptionsGroup::append_line(const Line& line) {
     auto grid_sizer = m_grid_sizer;
 
     // Build a label if we have it
+	wxStaticText* label=nullptr;
     if (label_width != 0) {
-		auto label = new wxStaticText(parent(), wxID_ANY, line.label + (line.label.IsEmpty() ? "" : ":"), 
+		label = new wxStaticText(parent(), wxID_ANY, line.label + (line.label.IsEmpty() ? "" : ":"), 
 							wxDefaultPosition, wxSize(label_width, -1));
         label->SetFont(label_font);
         label->Wrap(label_width); // avoid a Linux/GTK bug
@@ -128,25 +142,24 @@ void OptionsGroup::append_line(const Line& line) {
 	}
 	
 	// if we have a single option with no sidetext just add it directly to the grid sizer
-    if (option_set.size() == 1 && option_set.front().opt.sidetext.size() == 0 &&
-        option_set.front().side_widget == nullptr && line.get_extra_widgets().size() == 0) {
-        const auto& option = option_set.front();
-        const auto& field = build_field(option);
-//!         std::cerr << "single option, no sidetext.\n";
-//!         std::cerr << "field parent is not null?: " << (field->parent != nullptr) << "\n";
+	auto sizer = new wxBoxSizer(wxHORIZONTAL);
+	grid_sizer->Add(sizer, 0, wxEXPAND | wxALL, 0);
+	if (option_set.size() == 1 && option_set.front().opt.sidetext.size() == 0 &&
+		option_set.front().side_widget == nullptr && line.get_extra_widgets().size() == 0) {
+		const auto& option = option_set.front();
+		const auto& field = build_field(option, label);
 
-        if (is_window_field(field)) 
-			grid_sizer->Add(field->getWindow(), 0, (option.opt.full_width ? wxEXPAND : 0) |
+		sizer->Add(field->m_Undo_btn, 0, wxALIGN_CENTER_VERTICAL);
+		if (is_window_field(field)) 
+			sizer->Add(field->getWindow(), 0, (option.opt.full_width ? wxEXPAND : 0) |
 							wxBOTTOM | wxTOP | wxALIGN_CENTER_VERTICAL, wxOSX ? 0 : 2);
-        if (is_sizer_field(field)) 
-            grid_sizer->Add(field->getSizer(), 0, (option.opt.full_width ? wxEXPAND : 0) | wxALIGN_CENTER_VERTICAL, 0);
-        return;
-    }
+		if (is_sizer_field(field)) 
+			sizer->Add(field->getSizer(), 0, (option.opt.full_width ? wxEXPAND : 0) | wxALIGN_CENTER_VERTICAL, 0);
+		return;
+	}
 
     // if we're here, we have more than one option or a single option with sidetext
     // so we need a horizontal sizer to arrange these things
-    auto sizer = new wxBoxSizer(wxHORIZONTAL);
-	grid_sizer->Add(sizer, 0, wxEXPAND | wxALL, 0);
 	for (auto opt : option_set) {
 		ConfigOptionDef option = opt.opt;
 		// add label if any
@@ -156,14 +169,15 @@ void OptionsGroup::append_line(const Line& line) {
 // 			wxString str_label = (option.label == "Top" || option.label == "Bottom") ?
 // 								wxGETTEXT_IN_CONTEXT("Layers", wxString(option.label.c_str()):
 // 								L_str(option.label);
-			auto field_label = new wxStaticText(parent(), wxID_ANY, str_label + ":", wxDefaultPosition, wxDefaultSize);
-			field_label->SetFont(label_font);
-			sizer->Add(field_label, 0, wxALIGN_CENTER_VERTICAL, 0);
+			label = new wxStaticText(parent(), wxID_ANY, str_label + ":", wxDefaultPosition, wxDefaultSize);
+			label->SetFont(label_font);
+			sizer->Add(label, 0, wxALIGN_CENTER_VERTICAL, 0);
 		}
 
 		// add field
 		const Option& opt_ref = opt;
-		auto& field = build_field(opt_ref);
+		auto& field = build_field(opt_ref, label);
+		sizer->Add(field->m_Undo_btn, 0, wxALIGN_CENTER_VERTICAL, 0);
 		is_sizer_field(field) ? 
 			sizer->Add(field->getSizer(), 0, wxALIGN_CENTER_VERTICAL, 0) :
 			sizer->Add(field->getWindow(), 0, wxALIGN_CENTER_VERTICAL, 0);
@@ -244,6 +258,12 @@ void ConfigOptionsGroup::on_change_OG(t_config_option_key opt_id, boost::any val
 			// 		# Currently used for the post_process config value only.
 			// 		my @values = split / ; / , $field_value;
 			// 		$self->config->set($opt_key, \@values);
+			std::string str = boost::any_cast<std::string>(value);
+			if (str.back() == ';')
+				str.pop_back();
+			std::vector<std::string> values;
+			boost::split(values, str, boost::is_any_of(";"));
+			change_opt_value(*m_config, opt_key, values);
 		}
 		else {
 			if (opt_index == -1) {
@@ -263,6 +283,30 @@ void ConfigOptionsGroup::on_change_OG(t_config_option_key opt_id, boost::any val
 	OptionsGroup::on_change_OG(opt_id, value); //!? Why doing this
 }
 
+void ConfigOptionsGroup::back_to_initial_value(const std::string opt_key)
+{
+	if (m_get_initial_config == nullptr)
+		return;
+	DynamicPrintConfig config = m_get_initial_config();
+	boost::any value;
+	if (opt_key == "extruders_count"){
+		auto   *nozzle_diameter = dynamic_cast<const ConfigOptionFloats*>(config.option("nozzle_diameter"));
+		value = int(nozzle_diameter->values.size());
+	}
+	else if (m_opt_map.find(opt_key) != m_opt_map.end())
+	{
+		auto opt_id = m_opt_map.find(opt_key)->first;
+		std::string opt_short_key = m_opt_map.at(opt_id).first;
+		int opt_index = m_opt_map.at(opt_id).second;
+		value = get_config_value(config, opt_short_key, opt_index);
+	}
+	else
+		value = get_config_value(config, opt_key);
+
+	set_value(opt_key, value);
+	on_change_OG(opt_key, get_value(opt_key));
+}
+
 void ConfigOptionsGroup::reload_config(){
 	for (std::map< std::string, std::pair<std::string, int> >::iterator it = m_opt_map.begin(); it != m_opt_map.end(); ++it) {
 		auto opt_id = it->first;
@@ -323,7 +367,7 @@ boost::any ConfigOptionsGroup::get_config_value(DynamicPrintConfig& config, std:
 		double val = opt->type == coFloats ?
 					config.opt_float(opt_key, idx) :
 						opt->type == coFloat ? config.opt_float(opt_key) :
-						config.option<ConfigOptionPercents>(opt_key)->values.at(idx);
+						config.option<ConfigOptionPercents>(opt_key)->get_at(idx);
 		ret = double_to_string(val);
 		}
 		break;
@@ -333,6 +377,12 @@ boost::any ConfigOptionsGroup::get_config_value(DynamicPrintConfig& config, std:
 	case coStrings:
 		if (config.option<ConfigOptionStrings>(opt_key)->values.empty())
 			ret = text_value;
+		else if (opt->gui_flags.compare("serialized") == 0){
+			std::vector<std::string> values = config.option<ConfigOptionStrings>(opt_key)->values;
+			for (auto el : values)
+				text_value += el + ";";
+			ret = text_value;
+		}
 		else
 			ret = static_cast<wxString>(config.opt_string(opt_key, static_cast<unsigned int>(idx)));
 		break;
@@ -363,10 +413,8 @@ boost::any ConfigOptionsGroup::get_config_value(DynamicPrintConfig& config, std:
 			ret = static_cast<int>(config.option<ConfigOptionEnum<SeamPosition>>(opt_key)->value);
 	}
 		break;
-	case coPoints:{
-		const auto &value = *config.option<ConfigOptionPoints>(opt_key);
-		ret = value.values.at(idx);
-		}
+	case coPoints:
+		ret = config.option<ConfigOptionPoints>(opt_key)->get_at(idx);
 		break;
 	case coNone:
 	default:
@@ -376,6 +424,9 @@ boost::any ConfigOptionsGroup::get_config_value(DynamicPrintConfig& config, std:
 }
 
 Field* ConfigOptionsGroup::get_fieldc(t_config_option_key opt_key, int opt_index){
+	Field* field = get_field(opt_key);
+	if (field != nullptr)
+		return field;
 	std::string opt_id = "";
 	for (std::map< std::string, std::pair<std::string, int> >::iterator it = m_opt_map.begin(); it != m_opt_map.end(); ++it) {
 		if (opt_key == m_opt_map.at(it->first).first && opt_index == m_opt_map.at(it->first).second){
diff --git a/xs/src/slic3r/GUI/OptionsGroup.hpp b/xs/src/slic3r/GUI/OptionsGroup.hpp
index 6e88d1d88..aa0563866 100644
--- a/xs/src/slic3r/GUI/OptionsGroup.hpp
+++ b/xs/src/slic3r/GUI/OptionsGroup.hpp
@@ -27,6 +27,9 @@ namespace Slic3r { namespace GUI {
 using widget_t = std::function<wxSizer*(wxWindow*)>;//!std::function<wxWindow*(wxWindow*)>;
 using column_t = std::function<wxSizer*(const Line&)>;
 
+//auto default_label_clr = wxSystemSettings::GetColour(wxSYS_COLOUR_3DLIGHT); //GetSystemColour
+//auto modified_label_clr = *new wxColour(254, 189, 101);
+
 /// Wraps a ConfigOptionDef and adds function object for creating a side_widget.
 struct Option {
 	ConfigOptionDef			opt { ConfigOptionDef() };
@@ -75,6 +78,7 @@ public:
     wxSizer*		sizer {nullptr};
     column_t		extra_column {nullptr};
     t_change		m_on_change {nullptr};
+	std::function<DynamicPrintConfig()>	m_get_initial_config{ nullptr };
 
     wxFont			sidetext_font {wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT) };
     wxFont			label_font {wxSystemSettings::GetFont(wxSYS_DEFAULT_GUI_FONT) };
@@ -93,9 +97,9 @@ public:
 							if (m_fields.find(id) == m_fields.end()) return nullptr;
 							return m_fields.at(id).get();
     }
-	bool			set_value(t_config_option_key id, boost::any value) {
+	bool			set_value(t_config_option_key id, boost::any value, bool change_event = false) {
 							if (m_fields.find(id) == m_fields.end()) return false;
-							m_fields.at(id)->set_value(value);
+							m_fields.at(id)->set_value(value, change_event);
 							return true;
     }
 	boost::any		get_value(t_config_option_key id) {
@@ -109,8 +113,8 @@ public:
 	inline void		enable() { for (auto& field : m_fields) field.second->enable(); }
     inline void		disable() { for (auto& field : m_fields) field.second->disable(); }
 
-    OptionsGroup(wxWindow* _parent, wxString title) : 
-		m_parent(_parent), title(title) {
+    OptionsGroup(wxWindow* _parent, wxString title, bool is_tab_opt=false) : 
+		m_parent(_parent), title(title), m_is_tab_opt(is_tab_opt), staticbox(title!="") {
         sizer = (staticbox ? new wxStaticBoxSizer(new wxStaticBox(_parent, wxID_ANY, title), wxVERTICAL) : new wxBoxSizer(wxVERTICAL));
         auto num_columns = 1U;
         if (label_width != 0) num_columns++;
@@ -132,22 +136,25 @@ protected:
     t_optionfield_map		m_fields;
     bool					m_disabled {false};
     wxGridSizer*			m_grid_sizer {nullptr};
+	// "true" if option is created in preset tabs
+	bool					m_is_tab_opt{ false };
 
     /// Generate a wxSizer or wxWindow from a configuration option
     /// Precondition: opt resolves to a known ConfigOption
     /// Postcondition: fields contains a wx gui object.
-    const t_field&		build_field(const t_config_option_key& id, const ConfigOptionDef& opt);
-    const t_field&		build_field(const t_config_option_key& id);
-    const t_field&		build_field(const Option& opt);
+	const t_field&		build_field(const t_config_option_key& id, const ConfigOptionDef& opt, wxStaticText* label = nullptr);
+	const t_field&		build_field(const t_config_option_key& id, wxStaticText* label = nullptr);
+	const t_field&		build_field(const Option& opt, wxStaticText* label = nullptr);
 
     virtual void		on_kill_focus (){};
 	virtual void		on_change_OG(t_config_option_key opt_id, boost::any value);
+	virtual void		back_to_initial_value(const std::string opt_key){};
 };
 
 class ConfigOptionsGroup: public OptionsGroup {
 public:
-	ConfigOptionsGroup(wxWindow* parent, wxString title, DynamicPrintConfig* _config = nullptr) : 
-		OptionsGroup(parent, title), m_config(_config) {}
+	ConfigOptionsGroup(wxWindow* parent, wxString title, DynamicPrintConfig* _config = nullptr, bool is_tab_opt = false) :
+		OptionsGroup(parent, title, is_tab_opt), m_config(_config) {}
 
     /// reference to libslic3r config, non-owning pointer (?).
     DynamicPrintConfig*		m_config {nullptr};
@@ -169,10 +176,8 @@ public:
 	}
 
 	void		on_change_OG(t_config_option_key opt_id, boost::any value) override;
-	void		on_kill_focus() override
-	{
-		reload_config();
-	}
+	void		back_to_initial_value(const std::string opt_key) override;
+	void		on_kill_focus() override{ reload_config();}
 	void		reload_config();
 	boost::any	config_value(std::string opt_key, int opt_index, bool deserialize);
 	// return option value from config 
diff --git a/xs/src/slic3r/GUI/Preset.cpp b/xs/src/slic3r/GUI/Preset.cpp
index e2706c5db..57fa97774 100644
--- a/xs/src/slic3r/GUI/Preset.cpp
+++ b/xs/src/slic3r/GUI/Preset.cpp
@@ -227,7 +227,8 @@ const std::vector<std::string>& Preset::printer_options()
             "bed_shape", "z_offset", "gcode_flavor", "use_relative_e_distances", "serial_port", "serial_speed", 
             "octoprint_host", "octoprint_apikey", "octoprint_cafile", "use_firmware_retraction", "use_volumetric_e", "variable_layer_height",
             "single_extruder_multi_material", "start_gcode", "end_gcode", "before_layer_gcode", "layer_gcode", "toolchange_gcode",
-            "between_objects_gcode", "printer_notes", "cooling_tube_retraction", "cooling_tube_length", "parking_pos_retraction"
+            "between_objects_gcode", "printer_notes", "cooling_tube_retraction", "cooling_tube_length", "parking_pos_retraction",
+            "max_print_height"
         };
         s_opts.insert(s_opts.end(), Preset::nozzle_options().begin(), Preset::nozzle_options().end());
     }
diff --git a/xs/src/slic3r/GUI/PresetHints.cpp b/xs/src/slic3r/GUI/PresetHints.cpp
index 07c8e3b07..d4c929c1c 100644
--- a/xs/src/slic3r/GUI/PresetHints.cpp
+++ b/xs/src/slic3r/GUI/PresetHints.cpp
@@ -13,10 +13,11 @@
 
 namespace Slic3r {
 
+#define MIN_BUF_LENGTH	4096
 std::string PresetHints::cooling_description(const Preset &preset)
 {
 	std::string out;
-	char buf[4096];
+	char buf[MIN_BUF_LENGTH/*4096*/];
 	if (preset.config.opt_bool("cooling", 0)) {
 		int 	slowdown_below_layer_time 	= preset.config.opt_int("slowdown_below_layer_time", 0);
 		int 	min_fan_speed 				= preset.config.opt_int("min_fan_speed", 0);
@@ -220,7 +221,7 @@ std::string PresetHints::maximum_volumetric_flow_description(const PresetBundle
             + _CHB(L(" with a volumetric rate "));
         if (limited_by_max_volumetric_speed)
             max_flow = max_volumetric_speed;
-        char buf[2048];
+		char buf[MIN_BUF_LENGTH/*2048*/];
         sprintf(buf, _CHB(L("%3.2f mm³/s")), max_flow);
         out += buf;
         sprintf(buf, _CHB(L(" at filament speed %3.2f mm/s.")), max_flow / filament_crossection);
@@ -258,7 +259,7 @@ std::string PresetHints::recommended_thin_wall_thickness(const PresetBundle &pre
     
     if (num_perimeters > 0) {
         int num_lines = std::min(num_perimeters * 2, 10);
-        char buf[256];
+		char buf[MIN_BUF_LENGTH/*256*/];
         sprintf(buf, _CHB(L("Recommended object thin wall thickness for layer height %.2f and ")), layer_height);
         out += buf;
         // Start with the width of two closely spaced 
diff --git a/xs/src/slic3r/GUI/Tab.cpp b/xs/src/slic3r/GUI/Tab.cpp
index 473e0b13c..8cec658b3 100644
--- a/xs/src/slic3r/GUI/Tab.cpp
+++ b/xs/src/slic3r/GUI/Tab.cpp
@@ -3,6 +3,10 @@
 #include "PresetBundle.hpp"
 #include "PresetHints.hpp"
 #include "../../libslic3r/Utils.hpp"
+
+#include "slic3r/Utils/Http.hpp"
+#include "slic3r/Utils/OctoPrint.hpp"
+#include "BonjourDialog.hpp"
 #include "WipeTowerDialog.hpp"
 
 #include <wx/app.h>
@@ -15,6 +19,7 @@
 #include <wx/treectrl.h>
 #include <wx/imaglist.h>
 #include <wx/settings.h>
+#include <wx/filedlg.h>
 
 #include <boost/algorithm/string/predicate.hpp>
 
@@ -34,19 +39,23 @@ void Tab::create_preset_tab(PresetBundle *preset_bundle)
 
 	// preset chooser
 	m_presets_choice = new wxBitmapComboBox(panel, wxID_ANY, "", wxDefaultPosition, wxSize(270, -1), 0, 0,wxCB_READONLY);
-	const wxBitmap* bmp = new wxBitmap(from_u8(Slic3r::var("flag-green-icon.png")), wxBITMAP_TYPE_PNG);
+
+	auto color = wxSystemSettings::GetColour(wxSYS_COLOUR_WINDOW);
 
 	//buttons
 	wxBitmap bmpMenu;
 	bmpMenu = wxBitmap(from_u8(Slic3r::var("disk.png")), wxBITMAP_TYPE_PNG);
 	m_btn_save_preset = new wxBitmapButton(panel, wxID_ANY, bmpMenu, wxDefaultPosition, wxDefaultSize, wxBORDER_NONE);
+	if (wxMSW) m_btn_save_preset->SetBackgroundColour(color);
 	bmpMenu = wxBitmap(from_u8(Slic3r::var("delete.png")), wxBITMAP_TYPE_PNG);
 	m_btn_delete_preset = new wxBitmapButton(panel, wxID_ANY, bmpMenu, wxDefaultPosition, wxDefaultSize, wxBORDER_NONE);
+	if (wxMSW) m_btn_delete_preset->SetBackgroundColour(color);
 
 	m_show_incompatible_presets = false;
 	m_bmp_show_incompatible_presets = new wxBitmap(from_u8(Slic3r::var("flag-red-icon.png")), wxBITMAP_TYPE_PNG);
 	m_bmp_hide_incompatible_presets = new wxBitmap(from_u8(Slic3r::var("flag-green-icon.png")), wxBITMAP_TYPE_PNG);
 	m_btn_hide_incompatible_presets = new wxBitmapButton(panel, wxID_ANY, *m_bmp_hide_incompatible_presets, wxDefaultPosition, wxDefaultSize, wxBORDER_NONE);
+	if (wxMSW) m_btn_hide_incompatible_presets->SetBackgroundColour(color);
 
 	m_btn_save_preset->SetToolTip(_(L("Save current ")) + m_title);
 	m_btn_delete_preset->SetToolTip(_(L("Delete this preset")));
@@ -94,6 +103,7 @@ void Tab::create_preset_tab(PresetBundle *preset_bundle)
 		if (selected_item >= 0){
 			std::string selected_string = m_presets_choice->GetString(selected_item).ToUTF8().data();
 			select_preset(selected_string);
+			update_changed_ui();
 		}
 	}));
 
@@ -135,11 +145,93 @@ PageShp Tab::add_options_page(wxString title, std::string icon, bool is_extruder
 	return page;
 }
 
+template<class T>
+void add_correct_opts_to_dirty_options(const std::string &opt_key, std::vector<std::string> *vec, TabPrinter *tab)
+{
+	auto opt_init = static_cast<T*>(tab->m_presets->get_selected_preset().config.option(opt_key));
+	auto opt_cur = static_cast<T*>(tab->m_config->option(opt_key));
+	int opt_init_max_id = opt_init->values.size()-1;
+	for (int i = 0; i < opt_cur->values.size(); i++)
+	{
+		int init_id = i <= opt_init_max_id ? i : 0;
+		if (opt_cur->values[i] != opt_init->values[init_id])
+			vec->emplace_back(opt_key + "#" + std::to_string(i));
+	}
+}
+
+// Update UI according to changes
+void Tab::update_changed_ui()
+{
+	auto dirty_options = m_presets->current_dirty_options();
+
+	if (name() == "printer"){
+		// Update dirty_options in case changes of Extruder's options 
+		TabPrinter* tab = static_cast<TabPrinter*>(this);
+		std::vector<std::string> new_dirty;
+		for (auto opt_key : dirty_options)
+		{
+			switch (m_config->option(opt_key)->type())
+			{
+			case coInts:	add_correct_opts_to_dirty_options<ConfigOptionInts		>(opt_key, &new_dirty, tab);	break;
+			case coBools:	add_correct_opts_to_dirty_options<ConfigOptionBools		>(opt_key, &new_dirty, tab);	break;
+			case coFloats:	add_correct_opts_to_dirty_options<ConfigOptionFloats	>(opt_key, &new_dirty, tab);	break;
+			case coStrings:	add_correct_opts_to_dirty_options<ConfigOptionStrings	>(opt_key, &new_dirty, tab);	break;
+			case coPercents:add_correct_opts_to_dirty_options<ConfigOptionPercents	>(opt_key, &new_dirty, tab);	break;
+			case coPoints:	add_correct_opts_to_dirty_options<ConfigOptionPoints	>(opt_key, &new_dirty, tab);	break;
+			default:		new_dirty.emplace_back(opt_key);		break;
+			}
+		}
+
+		dirty_options.resize(0);
+		dirty_options = new_dirty;
+		if (tab->m_initial_extruders_count != tab->m_extruders_count){
+			dirty_options.emplace_back("extruders_count");
+		}
+	}
+
+	// Add new dirty options to m_dirty_options
+	for (auto opt_key : dirty_options){
+		Field* field = get_field(opt_key);
+		if (field != nullptr && find(m_dirty_options.begin(), m_dirty_options.end(), opt_key) == m_dirty_options.end()){
+			if (field->m_Label != nullptr){
+				field->m_Label->SetForegroundColour(*get_modified_label_clr());
+				field->m_Label->Refresh(true);
+			}
+			field->m_Undo_btn->SetBitmap(wxBitmap(from_u8(wxMSW ? var("action_undo.png") : var("arrow_undo.png")), wxBITMAP_TYPE_PNG));
+			field->m_is_modified_value = true;
+
+			m_dirty_options.push_back(opt_key);
+		}
+	}
+
+	// Delete clear options from m_dirty_options
+	for (auto i = 0; i < m_dirty_options.size(); ++i)
+	{
+		const std::string &opt_key = m_dirty_options[i];
+		Field* field = get_field(opt_key);
+		if (field != nullptr && find(dirty_options.begin(), dirty_options.end(), opt_key) == dirty_options.end())
+		{
+			field->m_Undo_btn->SetBitmap(wxBitmap(from_u8(var("bullet_white.png")), wxBITMAP_TYPE_PNG));
+			if (field->m_Label != nullptr){
+				field->m_Label->SetForegroundColour(wxSYS_COLOUR_WINDOWTEXT);
+				field->m_Label->Refresh(true);
+			}
+			field->m_is_modified_value = false;
+			std::vector<std::string>::iterator itr = find(m_dirty_options.begin(), m_dirty_options.end(), opt_key);
+			if (itr != m_dirty_options.end()){
+				m_dirty_options.erase(itr);
+				--i;
+			}
+		}
+	}
+}
+
 // Update the combo box label of the selected preset based on its "dirty" state,
 // comparing the selected preset config with $self->{config}.
 void Tab::update_dirty(){
 	m_presets->update_dirty_ui(m_presets_choice);
-	on_presets_changed();
+	on_presets_changed();	
+	update_changed_ui();
 }
 
 void Tab::update_tab_ui()
@@ -147,81 +239,13 @@ void Tab::update_tab_ui()
 	m_presets->update_tab_ui(m_presets_choice, m_show_incompatible_presets);
 }
 
-template<class T>
-boost::any get_new_value(const DynamicPrintConfig &config_new, const DynamicPrintConfig &config_old, std::string opt_key, int &index)
-{
-	for (int i = 0; i < config_new.option<T>(opt_key)->values.size(); i++)
-		if (config_new.option<T>(opt_key)->values[i] !=
-			config_old.option<T>(opt_key)->values[i]){
-			index = i;
-			break;
-		}
-	return config_new.option<T>(opt_key)->values[index];
-}
-
 // Load a provied DynamicConfig into the tab, modifying the active preset.
 // This could be used for example by setting a Wipe Tower position by interactive manipulation in the 3D view.
 void Tab::load_config(DynamicPrintConfig config)
 {
 	bool modified = 0;
-	boost::any value;
-	int opt_index = 0;
 	for(auto opt_key : m_config->diff(config)) {
-		switch ( config.def()->get(opt_key)->type ){
-		case coFloatOrPercent:
-			value = config.option<ConfigOptionFloatOrPercent>(opt_key)->value;
-			break;
-		case coPercent:
-			value = config.option<ConfigOptionPercent>(opt_key)->value;
-			break;
-		case coFloat:
-			value = config.opt_float(opt_key);
-			break;
-		case coString:
-			value = config.opt_string(opt_key);
-			break;
-		case coPercents:
-			value = get_new_value<ConfigOptionPercents>(config, *m_config, opt_key, opt_index);
-			break;
-		case coFloats:
-			value = get_new_value<ConfigOptionFloats>(config, *m_config, opt_key, opt_index);
-			break;
-		case coStrings:
-			value = config.option<ConfigOptionStrings>(opt_key)->values.empty() ? "" :
-				get_new_value<ConfigOptionStrings>(config, *m_config, opt_key, opt_index);
-			break;
-		case coBool:
-			value = config.opt_bool(opt_key);
-			break;
-		case coBools:
-			value = get_new_value<ConfigOptionBools>(config, *m_config, opt_key, opt_index);
-			break;
-		case coInt:
-			value = config.opt_int(opt_key);
-			break;
-		case coInts:
-			value = get_new_value<ConfigOptionInts>(config, *m_config, opt_key, opt_index);
-			break;
-		case coEnum:{
-			if (opt_key.compare("external_fill_pattern") == 0 ||
-				opt_key.compare("fill_pattern") == 0)
-				value = config.option<ConfigOptionEnum<InfillPattern>>(opt_key)->value;
-			else if (opt_key.compare("gcode_flavor") == 0)
-				value = config.option<ConfigOptionEnum<GCodeFlavor>>(opt_key)->value;
-			else if (opt_key.compare("support_material_pattern") == 0)
-				value = config.option<ConfigOptionEnum<SupportMaterialPattern>>(opt_key)->value;
-			else if (opt_key.compare("seam_position") == 0)
-				value = config.option<ConfigOptionEnum<SeamPosition>>(opt_key)->value;
-		}
-			break;
-		case coPoints:
-			break;
-		case coNone:
-			break;
-		default:
-			break;
-		}
-		change_opt_value(*m_config, opt_key, value, opt_index);
+		m_config->set_key_value(opt_key, config.option(opt_key)->clone());
 		modified = 1;
 	}
 	if (modified) {
@@ -292,6 +316,27 @@ void Tab::on_value_change(std::string opt_key, boost::any value)
 		}
 		g_wxMainFrame->ProcessWindowEvent(event);
 	}
+	if (opt_key == "fill_density")
+	{
+		value = get_optgroup()->get_config_value(*m_config, opt_key);
+		get_optgroup()->set_value(opt_key, value);
+	}
+	if (opt_key == "support_material" || opt_key == "support_material_buildplate_only")
+	{
+		wxString new_selection = !m_config->opt_bool("support_material") ?
+								_("None") :
+								m_config->opt_bool("support_material_buildplate_only") ?
+									_("Support on build plate only") :
+									_("Everywhere");
+		get_optgroup()->set_value("support", new_selection);
+	}
+	if (opt_key == "brim_width")
+	{
+		bool val = m_config->opt_float("brim_width") > 0.0 ? true : false;
+		get_optgroup()->set_value("brim", val);
+	}
+
+		
 	update();
 }
 
@@ -309,6 +354,22 @@ void Tab::on_presets_changed()
 	}
 }
 
+void Tab::update_frequently_changed_parameters()
+{
+	boost::any value = get_optgroup()->get_config_value(*m_config, "fill_density");
+	get_optgroup()->set_value("fill_density", value);
+
+	wxString new_selection = !m_config->opt_bool("support_material") ?
+							_("None") :
+							m_config->opt_bool("support_material_buildplate_only") ?
+								_("Support on build plate only") :
+								_("Everywhere");
+	get_optgroup()->set_value("support", new_selection);
+
+	bool val = m_config->opt_float("brim_width") > 0.0 ? true : false;
+	get_optgroup()->set_value("brim", val);
+}
+
 void Tab::reload_compatible_printers_widget()
 {
 	bool has_any = !m_config->option<ConfigOptionStrings>("compatible_printers")->values.empty();
@@ -598,7 +659,8 @@ void TabPrint::update()
 		DynamicPrintConfig new_conf = *m_config;
 		if (dialog->ShowModal() == wxID_YES) {
 			const auto &val = *m_config->option<ConfigOptionFloatOrPercent>("first_layer_height");
-			new_conf.set_key_value("first_layer_height", new ConfigOptionFloatOrPercent(0.2, val.percent));
+			auto percent = val.percent;
+			new_conf.set_key_value("first_layer_height", new ConfigOptionFloatOrPercent(0.2, percent));
 
 			if (m_config->opt_float("layer_height") < 0.15) new_conf.set_key_value("layer_height", new ConfigOptionFloat(0.15));
 			if (m_config->opt_float("layer_height") > 0.35) new_conf.set_key_value("layer_height", new ConfigOptionFloat(0.35));
@@ -696,13 +758,16 @@ void TabPrint::update()
 					"\nShall I switch to rectilinear fill pattern?"));
 				auto dialog = new wxMessageDialog(parent(), msg_text, _(L("Infill")), wxICON_WARNING | wxYES | wxNO);
 				DynamicPrintConfig new_conf = *m_config;
+				double fill_density;
 				if (dialog->ShowModal() == wxID_YES) {
 					new_conf.set_key_value("fill_pattern", new ConfigOptionEnum<InfillPattern>(ipRectilinear));
-					new_conf.set_key_value("fill_density", new ConfigOptionPercent(100));
+					fill_density = 100;
 				}
 				else
-					new_conf.set_key_value("fill_density", new ConfigOptionPercent(40));
+					fill_density = m_presets->get_selected_preset().config.option<ConfigOptionPercent>("fill_density")->value;
+				new_conf.set_key_value("fill_density", new ConfigOptionPercent(fill_density));
 				load_config(new_conf);
+				on_value_change("fill_density", fill_density);
 			}
 		}
 	}
@@ -990,14 +1055,14 @@ void TabPrinter::build()
 	auto default_config = m_preset_bundle->full_config();
 
 	auto   *nozzle_diameter = dynamic_cast<const ConfigOptionFloats*>(m_config->option("nozzle_diameter"));
-	m_extruders_count = nozzle_diameter->values.size();
+	m_initial_extruders_count = m_extruders_count = nozzle_diameter->values.size();
 
 	auto page = add_options_page(_(L("General")), "printer_empty.png");
 		auto optgroup = page->new_optgroup(_(L("Size and coordinates")));
 
 		Line line{ _(L("Bed shape")), "" };
 		line.widget = [this](wxWindow* parent){
-	auto btn = new wxButton(parent, wxID_ANY, _(L(" Set "))+"\u2026", wxDefaultPosition, wxDefaultSize, wxBU_LEFT | wxBU_EXACTFIT);
+			auto btn = new wxButton(parent, wxID_ANY, _(L(" Set "))+"\u2026", wxDefaultPosition, wxDefaultSize, wxBU_LEFT | wxBU_EXACTFIT);
 			//			btn->SetFont(Slic3r::GUI::small_font);
 			btn->SetBitmap(wxBitmap(from_u8(Slic3r::var("printer_empty.png")), wxBITMAP_TYPE_PNG));
 
@@ -1015,7 +1080,8 @@ void TabPrinter::build()
 			return sizer;
 		};
 		optgroup->append_line(line);
-		optgroup->append_single_option_line("z_offset");
+        optgroup->append_single_option_line("max_print_height");
+        optgroup->append_single_option_line("z_offset");
 
 		optgroup = page->new_optgroup(_(L("Capabilities")));
 		ConfigOptionDef def;
@@ -1088,39 +1154,18 @@ void TabPrinter::build()
 		}
 
 		optgroup = page->new_optgroup(_(L("OctoPrint upload")));
-		// # append two buttons to the Host line
-		auto octoprint_host_browse = [this] (wxWindow* parent) {
+
+		auto octoprint_host_browse = [this, optgroup] (wxWindow* parent) {
 			auto btn = new wxButton(parent, wxID_ANY, _(L(" Browse "))+"\u2026", wxDefaultPosition, wxDefaultSize, wxBU_LEFT);
-//			btn->SetFont($Slic3r::GUI::small_font);
 			btn->SetBitmap(wxBitmap(from_u8(Slic3r::var("zoom.png")), wxBITMAP_TYPE_PNG));
 			auto sizer = new wxBoxSizer(wxHORIZONTAL);
 			sizer->Add(btn);
 
-			if (m_is_disabled_button_browse) 
-				btn->Disable();
-
-			btn->Bind(wxEVT_BUTTON, [this, parent](wxCommandEvent e){
-				if (m_event_button_browse > 0){
-					wxCommandEvent event(m_event_button_browse);
-					event.SetString("Button BROWSE was clicked!");
-					g_wxMainFrame->ProcessWindowEvent(event);
+			btn->Bind(wxEVT_BUTTON, [this, parent, optgroup](wxCommandEvent e) {
+				BonjourDialog dialog(parent);
+				if (dialog.show_and_lookup()) {
+					optgroup->set_value("octoprint_host", std::move(dialog.get_selected()), true);
 				}
-// 				// # look for devices
-// 				auto entries;
-// 				{
-// 					my $res = Net::Bonjour->new('http');
-// 					$res->discover;
-// 					$entries = [$res->entries];
-// 				}
-// 				if (@{$entries}) {
-// 					my $dlg = Slic3r::GUI::BonjourBrowser->new($self, $entries);
-// 					$self->_load_key_value('octoprint_host', $dlg->GetValue . ":".$dlg->GetPort)
-// 						if $dlg->ShowModal == wxID_OK;
-// 				}
-// 				else {
-// 					auto msg_window = new wxMessageDialog(parent, "No Bonjour device found", "Device Browser", wxOK | wxICON_INFORMATION);
-// 					msg_window->ShowModal();
-// 				}
 			});
 
 			return sizer;
@@ -1129,33 +1174,23 @@ void TabPrinter::build()
 		auto octoprint_host_test = [this](wxWindow* parent) {
 			auto btn = m_octoprint_host_test_btn = new wxButton(parent, wxID_ANY, _(L("Test")), 
 				wxDefaultPosition, wxDefaultSize, wxBU_LEFT | wxBU_EXACTFIT);
-//			btn->SetFont($Slic3r::GUI::small_font);
 			btn->SetBitmap(wxBitmap(from_u8(Slic3r::var("wrench.png")), wxBITMAP_TYPE_PNG));
 			auto sizer = new wxBoxSizer(wxHORIZONTAL);
 			sizer->Add(btn);
 
-			btn->Bind(wxEVT_BUTTON, [this, parent](wxCommandEvent e) {
-				if (m_event_button_test > 0){
-					wxCommandEvent event(m_event_button_test);
-					event.SetString("Button TEST was clicked!");
-					g_wxMainFrame->ProcessWindowEvent(event);
+			btn->Bind(wxEVT_BUTTON, [this](wxCommandEvent e) {
+				OctoPrint octoprint(m_config);
+				wxString msg;
+				if (octoprint.test(msg)) {
+					show_info(this, _(L("Connection to OctoPrint works correctly.")), _(L("Success!")));
+				} else {
+					const auto text = wxString::Format("%s: %s\n\n%s",
+						_(L("Could not connect to OctoPrint")), msg, _(L("Note: OctoPrint version at least 1.1.0 is required."))
+					);
+					show_error(this, text);
 				}
-// 				my $ua = LWP::UserAgent->new;
-// 				$ua->timeout(10);
-// 
-// 				my $res = $ua->get(
-// 					"http://".$self->{config}->octoprint_host . "/api/version",
-// 					'X-Api-Key' = > $self->{config}->octoprint_apikey,
-// 					);
-// 				if ($res->is_success) {
-// 					show_info(parent, "Connection to OctoPrint works correctly.", "Success!");
-// 				}
-// 				else {
-// 					show_error(parent, 
-// 						"I wasn't able to connect to OctoPrint (".$res->status_line . "). "
-// 						. "Check hostname and OctoPrint version (at least 1.1.0 is required).");
-// 				}
- 			});
+			});
+
 			return sizer;
 		};
 
@@ -1165,6 +1200,45 @@ void TabPrinter::build()
 		optgroup->append_line(host_line);
 		optgroup->append_single_option_line("octoprint_apikey");
 
+		if (Http::ca_file_supported()) {
+
+			Line cafile_line = optgroup->create_single_option_line("octoprint_cafile");
+
+			auto octoprint_cafile_browse = [this, optgroup] (wxWindow* parent) {
+				auto btn = new wxButton(parent, wxID_ANY, _(L(" Browse "))+"\u2026", wxDefaultPosition, wxDefaultSize, wxBU_LEFT);
+				btn->SetBitmap(wxBitmap(from_u8(Slic3r::var("zoom.png")), wxBITMAP_TYPE_PNG));
+				auto sizer = new wxBoxSizer(wxHORIZONTAL);
+				sizer->Add(btn);
+
+				btn->Bind(wxEVT_BUTTON, [this, optgroup] (wxCommandEvent e){
+					static const auto filemasks = _(L("Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"));
+					wxFileDialog openFileDialog(this, _(L("Open CA certificate file")), "", "", filemasks, wxFD_OPEN | wxFD_FILE_MUST_EXIST);
+					if (openFileDialog.ShowModal() != wxID_CANCEL) {
+						optgroup->set_value("octoprint_cafile", std::move(openFileDialog.GetPath()), true);
+					}
+				});
+
+				return sizer;
+			};
+
+			cafile_line.append_widget(octoprint_cafile_browse);
+			optgroup->append_line(cafile_line);
+
+			auto octoprint_cafile_hint = [this, optgroup] (wxWindow* parent) {
+				auto txt = new wxStaticText(parent, wxID_ANY, 
+					_(L("HTTPS CA file is optional. It is only needed if you use HTTPS with a self-signed certificate.")));
+				auto sizer = new wxBoxSizer(wxHORIZONTAL);
+				sizer->Add(txt);
+				return sizer;
+			};
+
+			Line cafile_hint { "", "" };
+			cafile_hint.full_width = 1;
+			cafile_hint.widget = std::move(octoprint_cafile_hint);
+			optgroup->append_line(cafile_hint);
+
+		}
+
 		optgroup = page->new_optgroup(_(L("Firmware")));
 		optgroup->append_single_option_line("gcode_flavor");
 
@@ -1238,6 +1312,7 @@ void TabPrinter::extruders_count_changed(size_t extruders_count){
 	m_preset_bundle->printers.get_edited_preset().set_num_extruders(extruders_count);
 	m_preset_bundle->update_multi_material_filament_presets();
 	build_extruder_pages();
+	reload_config();
 	on_value_change("extruders_count", extruders_count);
 }
 
@@ -1325,13 +1400,8 @@ void TabPrinter::update(){
 			m_serial_test_btn->Disable();
 	}
 
-	en = !m_config->opt_string("octoprint_host").empty();
-	if ( en && m_is_user_agent)
-		m_octoprint_host_test_btn->Enable();
-	else 
-		m_octoprint_host_test_btn->Disable(); 
-	get_field("octoprint_apikey")->toggle(en);
-
+	m_octoprint_host_test_btn->Enable(!m_config->opt_string("octoprint_host").empty());
+	
 	bool have_multiple_extruders = m_extruders_count > 1;
 	get_field("toolchange_gcode")->toggle(have_multiple_extruders);
 	get_field("single_extruder_multi_material")->toggle(have_multiple_extruders);
@@ -1376,8 +1446,9 @@ void TabPrinter::update(){
 
 			DynamicPrintConfig new_conf = *m_config;
 			if (dialog->ShowModal() == wxID_YES) {
-				auto wipe = static_cast<ConfigOptionBools*>(m_config->option("wipe"));
-				wipe->values[i] = 0;
+				auto wipe = static_cast<ConfigOptionBools*>(m_config->option("wipe")->clone());
+				for (int w = 0; w < wipe->values.size(); w++)
+					wipe->values[w] = false;
 				new_conf.set_key_value("wipe", wipe);
 			}
 			else {
@@ -1400,15 +1471,13 @@ void TabPrinter::update(){
 void Tab::load_current_preset()
 {
 	auto preset = m_presets->get_edited_preset();
-//	try{
-//		local $SIG{ __WARN__ } = Slic3r::GUI::warning_catcher($self);
-		preset.is_default ? m_btn_delete_preset->Disable() : m_btn_delete_preset->Enable(true);
-		update();
-		// For the printer profile, generate the extruder pages.
-		on_preset_loaded();
-		// Reload preset pages with the new configuration values.
-		reload_config();
-//	};
+	preset.is_default ? m_btn_delete_preset->Disable() : m_btn_delete_preset->Enable(true);
+	update();
+	// For the printer profile, generate the extruder pages.
+	on_preset_loaded();
+	// Reload preset pages with the new configuration values.
+	reload_config();
+
 	// use CallAfter because some field triggers schedule on_change calls using CallAfter,
 	// and we don't want them to be called after this update_dirty() as they would mark the 
 	// preset dirty again
@@ -1419,6 +1488,12 @@ void Tab::load_current_preset()
 			return;
 		update_tab_ui();
 		on_presets_changed();
+
+		if (name() == "print")
+			update_frequently_changed_parameters();
+		if (m_name == "printer")
+			static_cast<TabPrinter*>(this)->m_initial_extruders_count = static_cast<TabPrinter*>(this)->m_extruders_count;
+		update_changed_ui();
 	});
 }
 
@@ -1787,7 +1862,7 @@ bool Page::set_value(t_config_option_key opt_key, boost::any value){
 ConfigOptionsGroupShp Page::new_optgroup(wxString title, int noncommon_label_width /*= -1*/)
 {
 	//! config_ have to be "right"
-	ConfigOptionsGroupShp optgroup = std::make_shared<ConfigOptionsGroup>(this, title, m_config);
+	ConfigOptionsGroupShp optgroup = std::make_shared<ConfigOptionsGroup>(this, title, m_config, true);
 	if (noncommon_label_width >= 0)
 		optgroup->label_width = noncommon_label_width;
 
@@ -1801,6 +1876,11 @@ ConfigOptionsGroupShp Page::new_optgroup(wxString title, int noncommon_label_wid
 //!        });
 	};
 
+	optgroup->m_get_initial_config = [this](){
+		DynamicPrintConfig config = static_cast<Tab*>(GetParent())->m_presets->get_selected_preset().config;
+		return config;
+	};
+
 	vsizer()->Add(optgroup->sizer, 0, wxEXPAND | wxALL, 10);
 	m_optgroups.push_back(optgroup);
 
diff --git a/xs/src/slic3r/GUI/Tab.hpp b/xs/src/slic3r/GUI/Tab.hpp
index ae25f6201..234c90765 100644
--- a/xs/src/slic3r/GUI/Tab.hpp
+++ b/xs/src/slic3r/GUI/Tab.hpp
@@ -100,6 +100,7 @@ protected:
 	bool				m_no_controller;
 
 	std::vector<std::string>	m_reload_dependent_tabs = {};
+	std::vector<std::string>	m_dirty_options = {};
 
 	// The two following two event IDs are generated at Plater.pm by calling Wx::NewEventType.
 	wxEventType			m_event_value_change = 0;
@@ -146,6 +147,7 @@ public:
 	void		toggle_show_hide_incompatible();
 	void		update_show_hide_incompatible_button();
 	void		update_ui_from_settings();
+	void		update_changed_ui();
 	
 	PageShp		add_options_page(wxString title, std::string icon, bool is_extruder_pages = false);
 
@@ -172,6 +174,7 @@ public:
 
 protected:
 	void			on_presets_changed();
+	void			update_frequently_changed_parameters();
 };
 
 //Slic3r::GUI::Tab::Print;
@@ -212,23 +215,16 @@ public:
 //Slic3r::GUI::Tab::Printer;
 class TabPrinter : public Tab
 {
-	bool		m_is_disabled_button_browse;
-	bool		m_is_user_agent;
-	// similar event by clicking Buttons "Browse" & "Test"
-	wxEventType	m_event_button_browse = 0;
-	wxEventType m_event_button_test = 0;
 public:
 	wxButton*	m_serial_test_btn;
 	wxButton*	m_octoprint_host_test_btn;
 
 	size_t		m_extruders_count;
+	size_t		m_initial_extruders_count;
 	std::vector<PageShp>	m_extruder_pages;
 
 	TabPrinter() {}
-	TabPrinter(wxNotebook* parent, bool no_controller, bool is_disabled_btn_browse, bool is_user_agent) :
-		Tab(parent, _(L("Printer Settings")), "printer", no_controller),
-		m_is_disabled_button_browse(is_disabled_btn_browse), 
-		m_is_user_agent(is_user_agent) {}
+	TabPrinter(wxNotebook* parent, bool no_controller) : Tab(parent, _(L("Printer Settings")), "printer", no_controller) {}
 	~TabPrinter(){}
 
 	void		build() override;
@@ -237,10 +233,6 @@ public:
 	void		extruders_count_changed(size_t extruders_count);
 	void		build_extruder_pages();
 	void		on_preset_loaded() override;
-
-	// Set the events to the callbacks posted to the main frame window (currently implemented in Perl).
-	void		set_event_button_browse(wxEventType evt)	{ m_event_button_browse = evt; }
-	void		set_event_button_test(wxEventType evt)		{ m_event_button_test = evt; }
 };
 
 class SavePresetWindow :public wxDialog
diff --git a/xs/src/slic3r/Utils/Bonjour.cpp b/xs/src/slic3r/Utils/Bonjour.cpp
index 6107e2c60..09d9b5873 100644
--- a/xs/src/slic3r/Utils/Bonjour.cpp
+++ b/xs/src/slic3r/Utils/Bonjour.cpp
@@ -1,9 +1,7 @@
 #include "Bonjour.hpp"
 
-#include <iostream>  // XXX
 #include <cstdint>
 #include <algorithm>
-#include <unordered_map>
 #include <array>
 #include <vector>
 #include <string>
@@ -23,16 +21,18 @@ namespace asio = boost::asio;
 using boost::asio::ip::udp;
 
 
-// TODO: Fuzzing test (done without TXT)
-// FIXME: check char retype to unsigned
-
-
 namespace Slic3r {
 
 
 // Minimal implementation of a MDNS/DNS-SD client
 // This implementation is extremely simple, only the bits that are useful
-// for very basic MDNS discovery are present.
+// for basic MDNS discovery of OctoPi devices are present.
+// However, the bits that are present are implemented with security in mind.
+// Only fully correct DNS replies are allowed through.
+// While decoding the decoder will bail the moment it encounters anything fishy.
+// At least that's the idea. To help prove this is actually the case,
+// the implementations has been tested with AFL.
+
 
 struct DnsName: public std::string
 {
@@ -48,8 +48,7 @@ struct DnsName: public std::string
 			return boost::none;
 		}
 
-		// Check for recursion depth to prevent parsing names that are nested too deeply
-		// or end up cyclic:
+		// Check for recursion depth to prevent parsing names that are nested too deeply or end up cyclic:
 		if (depth >= MAX_RECURSION) {
 			return boost::none;
 		}
@@ -443,6 +442,30 @@ private:
 	}
 };
 
+std::ostream& operator<<(std::ostream &os, const DnsMessage &msg)
+{
+	os << "DnsMessage(ID: " << msg.header.id << ", "
+		<< "Q: " << (msg.question ? msg.question->name.c_str() : "none") << ", "
+		<< "A: " << (msg.rr_a ? msg.rr_a->ip.to_string() : "none") << ", "
+		<< "AAAA: " << (msg.rr_aaaa ? msg.rr_aaaa->ip.to_string() : "none") << ", "
+		<< "services: [";
+
+		enum { SRV_PRINT_MAX = 3 };
+		unsigned i = 0;
+		for (const auto &sdpair : msg.sdmap) {
+			os << sdpair.first << ", ";
+
+			if (++i >= SRV_PRINT_MAX) {
+				os << "...";
+				break;
+			}
+		}
+
+		os << "])";
+
+	return os;
+}
+
 
 struct BonjourRequest
 {
@@ -515,6 +538,7 @@ struct Bonjour::priv
 	const std::string protocol;
 	const std::string service_dn;
 	unsigned timeout;
+	unsigned retries;
 	uint16_t rq_id;
 
 	std::vector<char> buffer;
@@ -524,6 +548,7 @@ struct Bonjour::priv
 
 	priv(std::string service, std::string protocol);
 
+	std::string strip_service_dn(const std::string &service_name) const;
 	void udp_receive(udp::endpoint from, size_t bytes);
 	void lookup_perform();
 };
@@ -533,11 +558,26 @@ Bonjour::priv::priv(std::string service, std::string protocol) :
 	protocol(std::move(protocol)),
 	service_dn((boost::format("_%1%._%2%.local") % this->service % this->protocol).str()),
 	timeout(10),
+	retries(1),
 	rq_id(0)
 {
 	buffer.resize(DnsMessage::MAX_SIZE);
 }
 
+std::string Bonjour::priv::strip_service_dn(const std::string &service_name) const
+{
+	if (service_name.size() <= service_dn.size()) {
+		return service_name;
+	}
+
+	auto needle = service_name.rfind(service_dn);
+	if (needle == service_name.size() - service_dn.size()) {
+		return service_name.substr(0, needle - 1);
+	} else {
+		return service_name;
+	}
+}
+
 void Bonjour::priv::udp_receive(udp::endpoint from, size_t bytes)
 {
 	if (bytes == 0 || !replyfn) {
@@ -557,7 +597,10 @@ void Bonjour::priv::udp_receive(udp::endpoint from, size_t bytes)
 			}
 
 			const auto &srv = *sdpair.second.srv;
-			BonjourReply reply(ip, sdpair.first, srv.hostname);
+			auto service_name = strip_service_dn(sdpair.first);
+
+			std::string path;
+			std::string version;
 
 			if (sdpair.second.txt) {
 				static const std::string tag_path = "path=";
@@ -565,13 +608,14 @@ void Bonjour::priv::udp_receive(udp::endpoint from, size_t bytes)
 
 				for (const auto &value : sdpair.second.txt->values) {
 					if (value.size() > tag_path.size() && value.compare(0, tag_path.size(), tag_path) == 0) {
-						reply.path = value.substr(tag_path.size());
+						path = std::move(value.substr(tag_path.size()));
 					} else if (value.size() > tag_version.size() && value.compare(0, tag_version.size(), tag_version) == 0) {
-						reply.version = value.substr(tag_version.size());
+						version = std::move(value.substr(tag_version.size()));
 					}
 				}
 			}
 
+			BonjourReply reply(ip, srv.port, std::move(service_name), srv.hostname, std::move(path), std::move(version));
 			replyfn(std::move(reply));
 		}
 	}
@@ -595,15 +639,26 @@ void Bonjour::priv::lookup_perform()
 		udp::endpoint mcast(BonjourRequest::MCAST_IP4, BonjourRequest::MCAST_PORT);
 		socket.send_to(asio::buffer(brq->data), mcast);
 
-		bool timeout = false;
+		bool expired = false;
+		bool retry = false;
 		asio::deadline_timer timer(io_service);
-		timer.expires_from_now(boost::posix_time::seconds(10));
-		timer.async_wait([=, &timeout](const error_code &error) {
-			timeout = true;
-			if (self->completefn) {
-				self->completefn();
+		retries--;
+		std::function<void(const error_code &)> timer_handler = [&](const error_code &error) {
+			if (retries == 0 || error) {
+				expired = true;
+				if (self->completefn) {
+					self->completefn();
+				}
+			} else {
+				retry = true;
+				retries--;
+				timer.expires_from_now(boost::posix_time::seconds(timeout));
+				timer.async_wait(timer_handler);
 			}
-		});
+		};
+
+		timer.expires_from_now(boost::posix_time::seconds(timeout));
+		timer.async_wait(timer_handler);
 
 		udp::endpoint recv_from;
 		const auto recv_handler = [&](const error_code &error, size_t bytes) {
@@ -612,8 +667,11 @@ void Bonjour::priv::lookup_perform()
 		socket.async_receive_from(asio::buffer(buffer, buffer.size()), recv_from, recv_handler);
 
 		while (io_service.run_one()) {
-			if (timeout) {
+			if (expired) {
 				socket.cancel();
+			} else if (retry) {
+				retry = false;
+				socket.send_to(asio::buffer(brq->data), mcast);
 			} else {
 				buffer.resize(DnsMessage::MAX_SIZE);
 				socket.async_receive_from(asio::buffer(buffer, buffer.size()), recv_from, recv_handler);
@@ -626,13 +684,39 @@ void Bonjour::priv::lookup_perform()
 
 // API - public part
 
-BonjourReply::BonjourReply(boost::asio::ip::address ip, std::string service_name, std::string hostname) :
+BonjourReply::BonjourReply(boost::asio::ip::address ip, uint16_t port, std::string service_name, std::string hostname, std::string path, std::string version) :
 	ip(std::move(ip)),
+	port(port),
 	service_name(std::move(service_name)),
 	hostname(std::move(hostname)),
-	path("/"),
-	version("Unknown")
-{}
+	path(path.empty() ? std::move(std::string("/")) : std::move(path)),
+	version(version.empty() ? std::move(std::string("Unknown")) : std::move(version))
+{
+	std::string proto;
+	std::string port_suffix;
+	if (port == 443) { proto = "https://"; }
+	if (port != 443 && port != 80) { port_suffix = std::to_string(port).insert(0, 1, ':'); }
+	if (this->path[0] != '/') { this->path.insert(0, 1, '/'); }
+	full_address = proto + ip.to_string() + port_suffix;
+	if (this->path != "/") { full_address += path; }
+}
+
+bool BonjourReply::operator==(const BonjourReply &other) const
+{
+	return this->full_address == other.full_address
+		&& this->service_name == other.service_name;
+}
+
+bool BonjourReply::operator<(const BonjourReply &other) const
+{
+	if (this->ip != other.ip) {
+		// So that the common case doesn't involve string comparison
+		return this->ip < other.ip;
+	} else {
+		auto cmp = this->full_address.compare(other.full_address);
+		return cmp != 0 ? cmp < 0 : this->service_name < other.service_name;
+	}
+}
 
 std::ostream& operator<<(std::ostream &os, const BonjourReply &reply)
 {
@@ -641,6 +725,7 @@ std::ostream& operator<<(std::ostream &os, const BonjourReply &reply)
 	return os;
 }
 
+
 Bonjour::Bonjour(std::string service, std::string protocol) :
 	p(new priv(std::move(service), std::move(protocol)))
 {}
@@ -660,6 +745,12 @@ Bonjour& Bonjour::set_timeout(unsigned timeout)
 	return *this;
 }
 
+Bonjour& Bonjour::set_retries(unsigned retries)
+{
+	if (p && retries > 0) { p->retries = retries; }
+	return *this;
+}
+
 Bonjour& Bonjour::on_reply(ReplyFn fn)
 {
 	if (p) { p->replyfn = std::move(fn); }
@@ -677,7 +768,7 @@ Bonjour::Ptr Bonjour::lookup()
 	auto self = std::make_shared<Bonjour>(std::move(*this));
 
 	if (self->p) {
-		auto io_thread = std::thread([self](){
+		auto io_thread = std::thread([self]() {
 				self->p->lookup_perform();
 			});
 		self->p->io_thread = std::move(io_thread);
@@ -687,18 +778,4 @@ Bonjour::Ptr Bonjour::lookup()
 }
 
 
-void Bonjour::pokus()   // XXX
-{
-	auto bonjour = Bonjour("octoprint")
-		.set_timeout(15)
-		.on_reply([](BonjourReply &&reply) {
-			std::cerr << "BonjourReply: " << reply << std::endl;
-		})
-		.on_complete([](){
-			std::cerr << "MDNS lookup complete" << std::endl;
-		})
-		.lookup();
-}
-
-
 }
diff --git a/xs/src/slic3r/Utils/Bonjour.hpp b/xs/src/slic3r/Utils/Bonjour.hpp
index 285625c04..63f34638c 100644
--- a/xs/src/slic3r/Utils/Bonjour.hpp
+++ b/xs/src/slic3r/Utils/Bonjour.hpp
@@ -1,26 +1,31 @@
 #ifndef slic3r_Bonjour_hpp_
 #define slic3r_Bonjour_hpp_
 
+#include <cstdint>
 #include <memory>
 #include <string>
 #include <functional>
-// #include <ostream>
 #include <boost/asio/ip/address.hpp>
 
 
 namespace Slic3r {
 
 
-// TODO: reply data structure
 struct BonjourReply
 {
 	boost::asio::ip::address ip;
+	uint16_t port;
 	std::string service_name;
 	std::string hostname;
+	std::string full_address;
 	std::string path;
 	std::string version;
 
-	BonjourReply(boost::asio::ip::address ip, std::string service_name, std::string hostname);
+	BonjourReply() = delete;
+	BonjourReply(boost::asio::ip::address ip, uint16_t port, std::string service_name, std::string hostname, std::string path, std::string version);
+
+	bool operator==(const BonjourReply &other) const;
+	bool operator<(const BonjourReply &other) const;
 };
 
 std::ostream& operator<<(std::ostream &, const BonjourReply &);
@@ -32,7 +37,7 @@ private:
 	struct priv;
 public:
 	typedef std::shared_ptr<Bonjour> Ptr;
-	typedef std::function<void(BonjourReply &&reply)> ReplyFn;
+	typedef std::function<void(BonjourReply &&)> ReplyFn;
 	typedef std::function<void()> CompleteFn;
 
 	Bonjour(std::string service, std::string protocol = "tcp");
@@ -40,12 +45,15 @@ public:
 	~Bonjour();
 
 	Bonjour& set_timeout(unsigned timeout);
+	Bonjour& set_retries(unsigned retries);
+	// ^ Note: By default there is 1 retry (meaning 1 broadcast is sent).
+	// Timeout is per one retry, ie. total time spent listening = retries * timeout.
+	// If retries > 1, then care needs to be taken as more than one reply from the same service may be received.
+
 	Bonjour& on_reply(ReplyFn fn);
 	Bonjour& on_complete(CompleteFn fn);
 
 	Ptr lookup();
-
-	static void pokus();    // XXX: remove
 private:
 	std::unique_ptr<priv> p;
 };
diff --git a/xs/src/slic3r/Utils/Http.cpp b/xs/src/slic3r/Utils/Http.cpp
index 45a350a59..de28904e2 100644
--- a/xs/src/slic3r/Utils/Http.cpp
+++ b/xs/src/slic3r/Utils/Http.cpp
@@ -3,7 +3,6 @@
 #include <cstdlib>
 #include <functional>
 #include <thread>
-#include <iostream>
 #include <tuple>
 #include <boost/format.hpp>
 
@@ -45,7 +44,9 @@ struct Http::priv
 	priv(const std::string &url);
 	~priv();
 
+	static bool ca_file_supported(::CURL *curl);
 	static size_t writecb(void *data, size_t size, size_t nmemb, void *userp);
+	std::string curl_error(CURLcode curlcode);
 	std::string body_size_error();
 	void http_perform();
 };
@@ -71,6 +72,29 @@ Http::priv::~priv()
 	::curl_slist_free_all(headerlist);
 }
 
+bool Http::priv::ca_file_supported(::CURL *curl)
+{
+#ifdef _WIN32
+	bool res = false;
+#else
+	bool res = true;
+#endif
+
+	if (curl == nullptr) { return res; }
+
+#if LIBCURL_VERSION_MAJOR >= 7 && LIBCURL_VERSION_MINOR >= 48
+	::curl_tlssessioninfo *tls;
+	if (::curl_easy_getinfo(curl, CURLINFO_TLS_SSL_PTR, &tls) == CURLE_OK) {
+		if (tls->backend == CURLSSLBACKEND_SCHANNEL || tls->backend == CURLSSLBACKEND_DARWINSSL) {
+			// With Windows and OS X native SSL support, cert files cannot be set
+			res = false;
+		}
+	}
+#endif
+
+	return res;
+}
+
 size_t Http::priv::writecb(void *data, size_t size, size_t nmemb, void *userp)
 {
 	auto self = static_cast<priv*>(userp);
@@ -88,6 +112,14 @@ size_t Http::priv::writecb(void *data, size_t size, size_t nmemb, void *userp)
 	return realsize;
 }
 
+std::string Http::priv::curl_error(CURLcode curlcode)
+{
+	return (boost::format("%1% (%2%)")
+		% ::curl_easy_strerror(curlcode)
+		% curlcode
+	).str();
+}
+
 std::string Http::priv::body_size_error()
 {
 	return (boost::format("HTTP body data size exceeded limit (%1% bytes)") % limit).str();
@@ -121,7 +153,7 @@ void Http::priv::http_perform()
 		if (res == CURLE_WRITE_ERROR) {
 			error = std::move(body_size_error());
 		} else {
-			error = ::curl_easy_strerror(res);
+			error = std::move(curl_error(res));
 		};
 
 		if (errorfn) {
@@ -180,7 +212,7 @@ Http& Http::remove_header(std::string name)
 
 Http& Http::ca_file(const std::string &name)
 {
-	if (p) {
+	if (p && priv::ca_file_supported(p->curl)) {
 		::curl_easy_setopt(p->curl, CURLOPT_CAINFO, name.c_str());
 	}
 
@@ -257,5 +289,13 @@ Http Http::post(std::string url)
 	return http;
 }
 
+bool Http::ca_file_supported()
+{
+	::CURL *curl = ::curl_easy_init();
+	bool res = priv::ca_file_supported(curl);
+	if (curl != nullptr) { ::curl_easy_cleanup(curl); }
+	return res;
+}
+
 
 }
diff --git a/xs/src/slic3r/Utils/Http.hpp b/xs/src/slic3r/Utils/Http.hpp
index c591e17c5..6ac5fcce1 100644
--- a/xs/src/slic3r/Utils/Http.hpp
+++ b/xs/src/slic3r/Utils/Http.hpp
@@ -41,6 +41,7 @@ public:
 	Ptr perform();
 	void perform_sync();
 
+	static bool ca_file_supported();
 private:
 	Http(const std::string &url);
 
diff --git a/xs/src/slic3r/Utils/OctoPrint.cpp b/xs/src/slic3r/Utils/OctoPrint.cpp
index 58530833b..5bf51f470 100644
--- a/xs/src/slic3r/Utils/OctoPrint.cpp
+++ b/xs/src/slic3r/Utils/OctoPrint.cpp
@@ -20,16 +20,19 @@ OctoPrint::OctoPrint(DynamicPrintConfig *config) :
 	cafile(config->opt_string("octoprint_cafile"))
 {}
 
-std::string  OctoPrint::test() const
+bool OctoPrint::test(wxString &msg) const
 {
 	// Since the request is performed synchronously here,
-	// it is ok to refer to `res` from within the closure
-	std::string res;
+	// it is ok to refer to `msg` from within the closure
 
-	auto http = Http::get(std::move(make_url("api/version")));
+	bool res = true;
+
+	auto url = std::move(make_url("api/version"));
+	auto http = Http::get(std::move(url));
 	set_auth(http);
 	http.on_error([&](std::string, std::string error, unsigned status) {
-			res = format_error(error, status);
+			res = false;
+			msg = format_error(error, status);
 		})
 		.perform_sync();
 
@@ -43,21 +46,26 @@ void OctoPrint::send_gcode(int windowId, int completeEvt, int errorEvt, const st
 	http.form_add("print", print ? "true" : "false")
 		.form_add_file("file", filename)
 		.on_complete([=](std::string body, unsigned status) {
-			wxWindow *window = GUI::get_widget_by_id(windowId);
+			wxWindow *window = wxWindow::FindWindowById(windowId);
+			if (window == nullptr) { return; }
+
 			wxCommandEvent* evt = new wxCommandEvent(completeEvt);
-			evt->SetString("G-code file successfully uploaded to the OctoPrint server");
+			evt->SetString(_(L("G-code file successfully uploaded to the OctoPrint server")));
 			evt->SetInt(100);
 			wxQueueEvent(window, evt);
 		})
 		.on_error([=](std::string body, std::string error, unsigned status) {
-			wxWindow *window = GUI::get_widget_by_id(windowId);
+			wxWindow *window = wxWindow::FindWindowById(windowId);
+			if (window == nullptr) { return; }
 
 			wxCommandEvent* evt_complete = new wxCommandEvent(completeEvt);
 			evt_complete->SetInt(100);
 			wxQueueEvent(window, evt_complete);
 
 			wxCommandEvent* evt_error = new wxCommandEvent(errorEvt);
-			evt_error->SetString(wxString::Format("Error while uploading to the OctoPrint server: %s", format_error(error, status)));
+			evt_error->SetString(wxString::Format("%s: %s",
+				_(L("Error while uploading to the OctoPrint server")),
+				format_error(error, status)));
 			wxQueueEvent(window, evt_error);
 		})
 		.perform();
@@ -85,19 +93,15 @@ std::string OctoPrint::make_url(const std::string &path) const
 	}
 }
 
-std::string OctoPrint::format_error(std::string error, unsigned status)
+wxString OctoPrint::format_error(std::string error, unsigned status)
 {
+	const wxString wxerror = error;
+
 	if (status != 0) {
-		std::string res{"HTTP "};
-		res.append(std::to_string(status));
-
-		if (status == 401) {
-			res.append(": Invalid API key");
-		}
-
-		return std::move(res);
+		return wxString::Format("HTTP %u: %s", status,
+			(status == 401 ? _(L("Invalid API key")) : wxerror));
 	} else {
-		return std::move(error);
+		return std::move(wxerror);
 	}
 }
 
diff --git a/xs/src/slic3r/Utils/OctoPrint.hpp b/xs/src/slic3r/Utils/OctoPrint.hpp
index eca3baa63..1f544295c 100644
--- a/xs/src/slic3r/Utils/OctoPrint.hpp
+++ b/xs/src/slic3r/Utils/OctoPrint.hpp
@@ -2,8 +2,8 @@
 #define slic3r_OctoPrint_hpp_
 
 #include <string>
+#include <wx/string.h>
 
-// #include "Http.hpp"    // XXX: ?
 
 namespace Slic3r {
 
@@ -16,8 +16,7 @@ class OctoPrint
 public:
 	OctoPrint(DynamicPrintConfig *config);
 
-	std::string test() const;
-	// XXX: style
+	bool test(wxString &curl_msg) const;
 	void send_gcode(int windowId, int completeEvt, int errorEvt, const std::string &filename, bool print = false) const;
 private:
 	std::string host;
@@ -26,7 +25,7 @@ private:
 
 	void set_auth(Http &http) const;
 	std::string make_url(const std::string &path) const;
-	static std::string format_error(std::string error, unsigned status);
+	static wxString format_error(std::string error, unsigned status);
 };
 
 
diff --git a/xs/t/15_config.t b/xs/t/15_config.t
index 6e73c8a9a..397f7e479 100644
--- a/xs/t/15_config.t
+++ b/xs/t/15_config.t
@@ -99,8 +99,8 @@ foreach my $config (Slic3r::Config->new, Slic3r::Config::Static::new_FullPrintCo
     $config->set_deserialize('fill_pattern', 'line');
     is $config->get('fill_pattern'), 'line', 'deserialize enum (fill_pattern)';
     
-    $config->set_deserialize('support_material_pattern', 'pillars');
-    is $config->get('support_material_pattern'), 'pillars', 'deserialize enum (support_material_pattern)';
+    $config->set_deserialize('support_material_pattern', 'rectilinear');
+    is $config->get('support_material_pattern'), 'rectilinear', 'deserialize enum (support_material_pattern)';
     
     $config->set('extruder_offset', [[10,20],[30,45]]);
     is_deeply [ map $_->pp, @{$config->get('extruder_offset')} ], [[10,20],[30,45]], 'set/get points';
diff --git a/xs/xsp/GUI.xsp b/xs/xsp/GUI.xsp
index cae480c2f..3dc92fa94 100644
--- a/xs/xsp/GUI.xsp
+++ b/xs/xsp/GUI.xsp
@@ -35,14 +35,8 @@ void set_tab_panel(SV *ui)
 void add_debug_menu(SV *ui, int event_language_change)
     %code%{ Slic3r::GUI::add_debug_menu((wxMenuBar*)wxPli_sv_2_object(aTHX_ ui, "Wx::MenuBar"), event_language_change); %};
 
-void create_preset_tabs(PresetBundle *preset_bundle, bool no_controller, 
-                        bool is_disabled_button_browse, bool is_user_agent,
-                        int event_value_change, int event_presets_changed,
-                        int event_button_browse, int event_button_test)
-    %code%{ Slic3r::GUI::create_preset_tabs(preset_bundle, no_controller, 
-                                            is_disabled_button_browse, is_user_agent,
-                                            event_value_change, event_presets_changed, 
-                                            event_button_browse, event_button_test); %};
+void create_preset_tabs(bool no_controller, int event_value_change, int event_presets_changed)
+    %code%{ Slic3r::GUI::create_preset_tabs(no_controller, event_value_change, event_presets_changed); %};
 
 Ref<TabIface> get_preset_tab(char *name)
     %code%{ RETVAL=Slic3r::GUI::get_preset_tab_iface(name); %};
@@ -61,3 +55,11 @@ void set_app_config(AppConfig *app_config)
 
 void open_preferences_dialog(int preferences_event)
     %code%{ Slic3r::GUI::open_preferences_dialog(preferences_event); %};
+
+void set_preset_bundle(PresetBundle *preset_bundle)
+    %code%{ Slic3r::GUI::set_preset_bundle(preset_bundle); %};
+
+void add_frequently_changed_parameters(SV *ui_parent, SV *ui_sizer, SV *ui_p_sizer)
+    %code%{ Slic3r::GUI::add_frequently_changed_parameters((wxWindow*)wxPli_sv_2_object(aTHX_ ui_parent, "Wx::Window"),
+                                                           (wxBoxSizer*)wxPli_sv_2_object(aTHX_ ui_sizer, "Wx::BoxSizer"),
+                                                           (wxFlexGridSizer*)wxPli_sv_2_object(aTHX_ ui_p_sizer, "Wx::FlexGridSizer")); %};
diff --git a/xs/xsp/GUI_3DScene.xsp b/xs/xsp/GUI_3DScene.xsp
index 525283f9e..915d964d1 100644
--- a/xs/xsp/GUI_3DScene.xsp
+++ b/xs/xsp/GUI_3DScene.xsp
@@ -19,6 +19,9 @@
     void enable() const;
     void disable() const;
 
+    int shader_program_id() const
+        %code%{ RETVAL = THIS->shader_program_id; %};
+
     std::string last_error() const
         %code%{ RETVAL = THIS->last_error; %};
 };
@@ -45,6 +48,9 @@
     int                 zoom_to_volumes()
         %code%{ RETVAL = THIS->zoom_to_volumes; %};
 
+    void set_layer_height_texture_data(unsigned int texture_id, unsigned int shader_id, PrintObject* print_object, float z_cursor_relative, float edit_band_width);
+    void reset_layer_height_texture_data();
+
     int                 object_idx() const;
     int                 volume_idx() const;
     int                 instance_idx() const;
@@ -97,6 +103,9 @@
     void finalize_geometry(bool use_VBOs);
     void release_geometry();
 
+    void set_print_box(float min_x, float min_y, float min_z, float max_x, float max_y, float max_z);
+    void update_outside_state(DynamicPrintConfig* config, bool all_inside);
+
     bool move_volume_up(int idx)
         %code%{ 
             if (idx > 0 && idx < int(THIS->volumes.size())) {
@@ -154,13 +163,6 @@ finalize_legend_texture()
     OUTPUT:
         RETVAL
 
-unsigned int
-get_legend_texture_id()
-    CODE:
-        RETVAL = _3DScene::get_legend_texture_id();
-    OUTPUT:
-        RETVAL
-
 unsigned int
 get_legend_texture_width()
     CODE:
@@ -179,7 +181,38 @@ void
 reset_legend_texture()
     CODE:
         _3DScene::reset_legend_texture();
-             
+
+void
+generate_warning_texture(std::string msg)
+    CODE:
+        _3DScene::generate_warning_texture(msg);
+
+unsigned int
+finalize_warning_texture()
+    CODE:
+        RETVAL = _3DScene::finalize_warning_texture();
+    OUTPUT:
+        RETVAL
+
+unsigned int
+get_warning_texture_width()
+    CODE:
+        RETVAL = _3DScene::get_warning_texture_width();
+    OUTPUT:
+        RETVAL
+
+unsigned int
+get_warning_texture_height()
+    CODE:
+        RETVAL = _3DScene::get_warning_texture_height();
+    OUTPUT:
+        RETVAL
+
+void
+reset_warning_texture()
+    CODE:
+        _3DScene::reset_warning_texture();
+
 void
 _load_print_toolpaths(print, volumes, tool_colors, use_VBOs)
         Print               *print;
diff --git a/xs/xsp/Model.xsp b/xs/xsp/Model.xsp
index c0271ae75..78c94661e 100644
--- a/xs/xsp/Model.xsp
+++ b/xs/xsp/Model.xsp
@@ -99,6 +99,9 @@
 
     void print_info() const;
 
+    bool fits_print_volume(DynamicPrintConfig* config) const
+        %code%{ RETVAL = THIS->fits_print_volume(config); %};
+
     bool store_stl(char *path, bool binary)
         %code%{ TriangleMesh mesh = THIS->mesh(); RETVAL = Slic3r::store_stl(path, &mesh, binary); %};
     bool store_amf(char *path, Print* print)
@@ -361,9 +364,9 @@ ModelMaterial::attributes()
         %code%{ RETVAL = &THIS->offset; %};
 
     void set_rotation(double val)
-        %code%{ THIS->rotation = val; %};
+        %code%{ THIS->rotation = val; THIS->get_object()->invalidate_bounding_box(); %};
     void set_scaling_factor(double val)
-        %code%{ THIS->scaling_factor = val; %};
+        %code%{ THIS->scaling_factor = val; THIS->get_object()->invalidate_bounding_box(); %};
     void set_offset(Pointf *offset)
         %code%{ THIS->offset = *offset; %};
     
diff --git a/xs/xsp/Utils_OctoPrint.xsp b/xs/xsp/Utils_OctoPrint.xsp
index 062af4e0c..124f66cb5 100644
--- a/xs/xsp/Utils_OctoPrint.xsp
+++ b/xs/xsp/Utils_OctoPrint.xsp
@@ -9,6 +9,5 @@
     OctoPrint(DynamicPrintConfig *config);
     ~OctoPrint();
 
-    std::string test() const;
     void send_gcode(int windowId, int completeEvt, int errorEvt, std::string filename, bool print = false) const;
 };