3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Make sure spiral vase mode is not enabled for multi-island layers. #1938

Browse Source
This commit is contained in:
Alessandro Ranellucci 2014-04-30 12:23:07 +02:00
parent 8ded268e7e
commit 4680bbdfe2
2 changed files with 38 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
lib/Slic3r/GCode/Layer.pm
View File

@ -53,6 +53,8 @@ sub process_layer {
($layer->id > 0 || $self->print->config->brim_width == 0)
&& ($layer->id >= $self->print->config->skirt_height && $self->print->config->skirt_height != -1)
&& !defined(first { $_->config->bottom_solid_layers > $layer->id } @{$layer->regions})
&& !defined(first { @{$_->perimeters} > 1 } @{$layer->regions})
&& !defined(first { @{$_->fills} > 0 } @{$layer->regions})
);
}

39
t/shells.t
View File

@ -1,4 +1,4 @@
use Test::More tests => 10;
use Test::More tests => 17;
use strict;
use warnings;
@ -208,11 +208,16 @@ use Slic3r::Test;
{
my $config = Slic3r::Config->new_from_defaults;
$config->set('spiral_vase', 1);
$config->set('perimeters', 1);
$config->set('fill_density', 0);
$config->set('top_solid_layers', 0);
$config->set('bottom_solid_layers', 0);
$config->set('retract_layer_change', [0]);
$config->set('skirts', 0);
$config->set('first_layer_height', '100%');
$config->set('layer_height', 0.4);
$config->set('start_gcode', '');
$config->validate;
my $print = Slic3r::Test::init_print('20mm_cube', config => $config);
my $z_moves = 0;
@ -224,6 +229,7 @@ use Slic3r::Test;
my $sum_of_partial_z_equals_to_layer_height = 0;
my $all_layer_segments_have_same_slope = 0;
my $horizontal_extrusions = 0;
Slic3r::GCode::Reader->new->parse(Slic3r::Test::gcode($print), sub {
my ($self, $cmd, $args, $info) = @_;
@ -247,11 +253,11 @@ use Slic3r::Test;
my $total_dist_XY = sum(map $_->[1], @this_layer);
$sum_of_partial_z_equals_to_layer_height = 1
if abs(sum(map $_->[0], @this_layer) - $config->layer_height) > epsilon;
exit if $sum_of_partial_z_equals_to_layer_height;
foreach my $segment (@this_layer) {
# check that segment's dist_Z is proportioned to its dist_XY
$all_layer_segments_have_same_slope = 1
if abs($segment->[0]*$total_dist_XY/$config->layer_height - $segment->[1]) > epsilon;
if abs($segment->[0]*$total_dist_XY/$config->layer_height - $segment->[1]) > 0.1;
}
@this_layer = ();
@ -270,4 +276,31 @@ use Slic3r::Test;
ok !$horizontal_extrusions, 'no horizontal extrusions';
}
{
my $config = Slic3r::Config->new_from_defaults;
$config->set('perimeters', 1);
$config->set('fill_density', 0);
$config->set('top_solid_layers', 0);
$config->set('spiral_vase', 1);
$config->set('bottom_solid_layers', 0);
$config->set('skirts', 0);
$config->set('first_layer_height', '100%');
$config->set('start_gcode', '');
my $print = Slic3r::Test::init_print('two_hollow_squares', config => $config);
my $diagonal_moves = 0;
Slic3r::GCode::Reader->new->parse(Slic3r::Test::gcode($print), sub {
my ($self, $cmd, $args, $info) = @_;
if ($cmd eq 'G1') {
if ($info->{extruding} && $info->{dist_XY} > 0) {
if ($info->{dist_Z} > 0) {
$diagonal_moves++;
}
}
}
});
is $diagonal_moves, 0, 'no spiral moves on two-island object';
}
__END__