INAT bundle

https://github.com/prusa3d/PrusaSlicer/pull/6112

resources/profiles/INAT.idx

@@ -0,0 +1,2 @@
+min_slic3r_version = 2.3.0
+0.0.1 Initial version

resources/profiles/INAT.ini

@@ -0,0 +1,467 @@
+# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = INAT s.r.o.
+config_version = 0.0.1
+config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/INAT/
+
+###
+###     PRINTER LIST
+###
+
+[printer_model:PROTON_X_RAIL]
+name = INAT Proton X Rail
+variants = 0.4
+technology = FFF
+family = Proton
+
+[printer_model:PROTON_X_ROD]
+name = INAT Proton X Rod
+variants = 0.4
+technology = FFF
+family = Proton
+
+
+###
+###     QUALITY DEFINITIONS
+###
+
+[print:*common*]
+#layers
+layer_height = 0.2
+first_layer_height = 0.2
+perimeters = 3
+spiral_vase = 0
+top_solid_layers = 4
+bottom_solid_layers = 3
+top_solid_min_thickness = 0.8
+bottom_solid_min_thickness = 0.6
+extra_perimeters = 1
+ensure_vertical_shell_thickness = 1
+avoid_crossing_perimeters = 0
+thin_walls = 0
+overhangs = 1
+seam_position = aligned
+external_perimeters_first = 0
+#infill
+fill_density = 30%
+fill_pattern = cubic
+infill_anchor = 600%
+infill_anchor_max = 30
+top_fill_pattern = monotonic
+bottom_fill_patter = monotonic
+ironing = 0
+ironing_type = top
+infill_every_layers = 1
+infill_only_where_needed = 0
+solid_infill_every_layers = 0
+fill_angle = 45
+solid_infill_below_area = 20
+bridge_angle = 0
+only_retract_when_crossing_perimeters = 0
+infill_first = 0
+#skirt brim
+skirts = 5
+skirt_distance = 15
+skirt_height = 1
+draft_shield = 0
+min_skirt_length = 5
+brim_width = 0
+#support
+support_material = 0
+support_material_auto = 1
+support_material_threshold = 0
+support_material_enforce_layers = 0
+raft_layers = 0
+support_material_contact_distance = 0.2
+support_material_pattern = rectilinear
+support_material_with_sheath = 0
+support_material_spacing = 5
+support_material_angle = 45
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_contact_loops = 0
+support_material_buildplate_only = 0
+support_material_xy_spacing = 1
+dont_support_bridges = 1
+#speed
+perimeter_speed = 60
+small_perimeter_speed = 75%
+external_perimeter_speed = 50%
+infill_speed = 80
+solid_infill_speed = 100%
+top_solid_infill_speed = 30
+support_material_speed = 80
+support_material_interface_speed = 100%
+bridge_speed = 60
+gap_fill_speed = 40
+ironing_speed = 30
+travel_speed = 150
+first_layer_speed = 30
+default_acceleration = 0
+max_print_speed = 80
+max_volumetric_speed = 12
+#multiple extruders
+perimeter_extruder = 1
+infill_extruder = 1
+solid_infill_extruder = 1
+support_material_extruder = 1
+support_material_interface_extruder = 1
+ooze_prevention = 0
+wipe_tower = 0
+interface_shells = 0
+#advanced
+extrusion_width = 0
+first_layer_extrusion_width = 0
+perimeter_extrusion_width = 0
+external_perimeter_extrusion_width = 0
+infill_extrusion_width = 0
+solid_infill_extrusion_width = 0
+top_infill_extrusion_width = 0
+support_material_extrusion_width = 0
+infill_overlap = 25%
+bridge_flow_ratio = 1
+slice_closing_radius = 0.049
+resolution = 0
+xy_size_compensation = 0
+elefant_foot_compensation = 0.3
+clip_multipart_objects = 0
+#output
+complete_objects = 0
+extruder_clearance_radius = 85
+extruder_clearance_height = 34
+gcode_comments = 0
+gcode_label_objects = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}_{print_time}.gcode
+
+
+[print:0.2mm Standard @PROTON_X]
+inherits = *common*
+
+[print:0.2mm Strong @PROTON_X]
+inherits = *common*
+fill_density = 50%
+perimeters = 6
+
+[print:0.2mm Advanced Material @PROTON_X]
+inherits = *common*
+bottom_solid_layers = 5
+top_solid_layers = 6
+skirts = 0
+brim_width = 30
+infill_speed = 60
+support_material_speed = 60
+travel_speed = 100
+first_layer_speed = 20
+elefant_foot_compensation = 0
+
+[print:0.12mm Fine @PROTON_X]
+inherits = *common*
+bottom_solid_layers = 7
+top_solid_layers = 7
+infill_every_layers = 2
+perimeter_speed = 50
+infill_speed = 50
+
+[print:0.32mm Draft @PROTON_X]
+inherits = *common*
+perimeter_speed = 80
+external_perimeter_speed = 75%
+infill_speed = 100
+top_solid_infill_speed = 60
+fill_density = 15%
+
+###
+### PRINTER DEFINITIONS
+###
+
+[printer:*common*]
+printer_vendor = INAT s.r.o.
+default_filament_profile = "PLA @PROTON_X"
+#general
+printer_technology = FFF
+bed_shape = 0x0,304x0,304x304,0x304
+max_print_height = 650
+z_offset = 0
+extruders_count = 1
+gcode_flavor = marlin
+silent_mode = 0
+remaining_times = 1
+use_relative_e_distances = 0
+use_firmware_retraction = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+#gcodes
+start_gcode = G28 ;Home\nG0 Z0.3 F200 ;Move nozzle down\nM192 S50 ; Wait for probe temperature to settle\nG29\nG0 X0 Y0 Z30 F6000\nM84 E\nM0\nG1 Z15.0 F6000 ;Move the platform down 15mm\n;Prime the extruder\nG92 E0\nG1 F200 E3\nG92 E0\n
+end_gcode = M400\nM104 S0\nM140 S0\nM107\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X R5\nG0 Y300 F2000\nM84\n
+color_change_gcode = M600
+#limits
+machine_limits_usage = emit_to_gcode
+machine_max_feedrate_x = 200,200
+machine_max_feedrate_y = 200,200
+machine_max_feedrate_z = 10,10
+machine_max_feedrate_e = 100,100
+machine_max_acceleration_x = 500,500
+machine_max_acceleration_y = 500,500
+machine_max_acceleration_z = 100,100
+machine_max_acceleration_e = 2000,2000
+machine_max_acceleration_extruding = 1000,1000
+machine_max_acceleration_retracting = 1500,1500
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 1,1
+machine_max_jerk_e = 2.5,2.5
+machine_min_extruding_rate = 5
+#extruder 1
+nozzle_diameter = 0.4
+min_layer_height = 0.05
+max_layer_height = 0.33
+extruder_offset = 0x0
+retract_length = 1.5
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 0
+retract_speed = 45
+deretract_speed = 0
+retract_restart_extra = 0
+retract_before_travel = 2
+retract_layer_change = 0
+wipe = 1
+retract_before_wipe = 100%
+
+
+[printer:Proton X Rail]
+inherits = *common*
+printer_model = PROTON_X_RAIL
+printer_variant = 0.4
+default_print_profile = 0.2mm Standard @PROTON_X
+gcode_flavor = marlin
+machine_max_acceleration_y = 800,800
+
+[printer:Proton X Rod]
+inherits = *common*
+printer_model = PROTON_X_ROD
+printer_variant = 0.4
+default_print_profile = 0.2mm Standard @PROTON_X
+gcode_flavor = marlin
+
+
+###
+###     MATERIAL DEFINITIONS
+###
+
+[filament:*common*]
+#filament
+filament_colour = #29B2B2
+filament_diameter = 1.75
+extrusion_multiplier = 1
+filament_vendor = Generic
+#cooling
+fan_always_on = 0
+cooling = 1
+bridge_fan_speed = 100
+disable_fan_first_layers = 3
+full_fan_speed_layer = 0
+fan_below_layer_time = 10
+slowdown_below_layer_time = 5
+min_print_speed = 10
+#advanced
+filament_soluble = 0
+
+
+[filament:PLA @PROTON_X]
+inherits = *common*
+temperature = 210
+bed_temperature = 60
+first_layer_temperature = 210
+first_layer_bed_temperature = 60
+filament_type = PLA
+filament_cost = 20
+filament_density = 1.25
+min_fan_speed = 50
+max_fan_speed = 100
+
+
+[filament:PETG @PROTON_X]
+inherits = *common*
+temperature = 240
+bed_temperature = 80
+first_layer_temperature = 240
+first_layer_bed_temperature = 80
+filament_type = PETG
+filament_cost = 25
+filament_density = 1.27
+min_fan_speed = 0
+max_fan_speed = 50
+
+[filament:ABS @PROTON_X]
+inherits = *common*
+temperature = 235
+bed_temperature = 100
+first_layer_temperature = 235
+first_layer_bed_temperature = 100
+filament_type = ABS
+filament_cost = 20
+filament_density = 1.01
+cooling = 0
+bridge_fan_speed = 0
+
+[filament:ASA @PROTON_X]
+inherits = *common*
+temperature = 240
+bed_temperature = 110
+first_layer_temperature = 240
+first_layer_bed_temperature = 110
+filament_type = ASA
+filament_cost = 22
+filament_density = 1.07
+cooling = 0
+
+[filament:TPE @PROTON_X]
+inherits = *common*
+temperature = 220
+bed_temperature = 40
+first_layer_temperature = 220
+first_layer_bed_temperature = 40
+filament_type = TPE
+filament_cost = 32
+filament_density = 0.9
+min_fan_speed = 0
+max_fan_speed = 50
+filament_retract_length = 0.8
+filament_retract_speed = 25
+
+[filament:HIPS @PROTON_X]
+inherits = *common*
+temperature = 245
+bed_temperature = 100
+first_layer_temperature = 245
+first_layer_bed_temperature = 100
+filament_type = HIPS
+filament_cost = 15
+filament_density = 1.04
+min_fan_speed = 0
+max_fan_speed = 50
+filament_soluble = 1
+
+[filament:Nylon @PROTON_X]
+inherits = *common*
+temperature = 235
+bed_temperature = 130
+first_layer_temperature = 235
+first_layer_bed_temperature = 130
+filament_type = Nylon
+filament_cost = 70
+filament_density = 1.01
+cooling = 0
+bridge_fan_speed = 0
+
+[filament:PC @PROTON_X]
+inherits = *common*
+temperature = 270
+bed_temperature = 130
+first_layer_temperature = 270
+first_layer_bed_temperature = 130
+filament_type = PC
+filament_cost = 65
+filament_density = 1.19
+cooling = 0
+bridge_fan_speed = 0
+
+[filament:CPE @PROTON_X]
+inherits = *common*
+temperature = 280
+bed_temperature = 90
+first_layer_temperature = 280
+first_layer_bed_temperature = 90
+filament_type = PEI
+filament_cost = 380
+filament_density = 1.27
+cooling = 0
+bridge_fan_speed = 0
+
+[filament:PEEK @PROTON_X]
+inherits = *common*
+temperature = 440
+bed_temperature = 150
+first_layer_temperature = 440
+first_layer_bed_temperature = 150
+filament_type = PEEK
+filament_cost = 500
+filament_density = 1.3
+cooling = 0
+bridge_fan_speed = 0
+
+[filament:PEI @PROTON_X]
+inherits = *common*
+temperature = 400
+bed_temperature = 150
+first_layer_temperature = 400
+first_layer_bed_temperature = 150
+filament_type = PEI
+filament_cost = 380
+filament_density = 1.27
+cooling = 0
+bridge_fan_speed = 0
+
+[filament:Polymaker PolyMide CoPA @PROTON_X]
+inherits = *common*
+filament_vendor = Polymaker
+temperature = 265
+bed_temperature = 50
+first_layer_temperature = 265
+first_layer_bed_temperature = 50
+filament_type = Nylon
+filament_cost = 93
+filament_density = 1.12
+cooling = 0
+
+[filament:Polymaker PolyMide PA6-CF @PROTON_X]
+inherits = *common*
+filament_vendor = Polymaker
+temperature = 300
+bed_temperature = 40
+first_layer_temperature = 300
+first_layer_bed_temperature = 40
+filament_type = Nylon
+filament_cost = 95
+filament_density = 1.17
+cooling = 0
+
+[filament:Polymaker PolyMide PA6-GF @PROTON_X]
+inherits = *common*
+filament_vendor = Polymaker
+temperature = 300
+bed_temperature = 40
+first_layer_temperature = 300
+first_layer_bed_temperature = 40
+filament_type = Nylon
+filament_cost = 95
+filament_density = 1.2
+cooling = 0
+
+[filament:Devil Design PETG @PROTON_X]
+inherits = *common*
+filament_vendor = Devil Design
+temperature = 250
+bed_temperature = 80
+first_layer_temperature = 250
+first_layer_bed_temperature = 80
+filament_type = PETG
+filament_cost = 22
+filament_density = 1.23
+min_fan_speed = 0
+max_fan_speed = 50
+
+[filament:Filament PM PETG FRJet @PROTON_X]
+inherits = *common*
+filament_vendor = Filament PM
+temperature = 250
+bed_temperature = 90
+first_layer_temperature = 250
+first_layer_bed_temperature = 90
+filament_type = PETG
+filament_cost = 45.5
+filament_density = 1.27
+cooling = 0