diff --git a/resources/profiles/PrusaResearch.idx b/resources/profiles/PrusaResearch.idx
index f07d8b280..e3b1e6ef5 100644
--- a/resources/profiles/PrusaResearch.idx
+++ b/resources/profiles/PrusaResearch.idx
@@ -1 +1,3 @@
+0.1.2 Wipe tower changes
+0.1.1 Minor print speed adjustments
 0.1.0 Initial
diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini
index 87950bae7..ba8e55ad4 100644
--- a/resources/profiles/PrusaResearch.ini
+++ b/resources/profiles/PrusaResearch.ini
@@ -5,7 +5,7 @@
 name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the Slic3r configuration to be downgraded.
-config_version = 0.1.0
+config_version = 0.1.2
 # Where to get the updates from?
 config_update_url = https://raw.githubusercontent.com/prusa3d/Slic3r-settings/master/live/PrusaResearch/
 
@@ -90,7 +90,7 @@ seam_position = nearest
 skirts = 1
 skirt_distance = 2
 skirt_height = 3
-small_perimeter_speed = 20
+small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -180,7 +180,7 @@ gap_fill_speed = 20
 infill_acceleration = 800
 infill_speed = 30
 max_print_speed = 80
-small_perimeter_speed = 15
+small_perimeter_speed = 20
 solid_infill_speed = 30
 support_material_extrusion_width = 0.3
 support_material_spacing = 1.5
@@ -215,7 +215,7 @@ infill_speed = 20
 max_print_speed = 100
 perimeter_extrusion_width = 0
 perimeter_speed = 20
-small_perimeter_speed = 10
+small_perimeter_speed = 15
 solid_infill_extrusion_width = 0
 solid_infill_speed = 20
 support_material_speed = 20
@@ -268,7 +268,7 @@ infill_acceleration = 1600
 infill_speed = 40
 perimeter_acceleration = 600
 perimeter_speed = 25
-small_perimeter_speed = 10
+small_perimeter_speed = 15
 solid_infill_speed = 40
 top_solid_infill_speed = 30
 
@@ -341,7 +341,7 @@ infill_acceleration = 1600
 infill_speed = 40
 perimeter_acceleration = 600
 perimeter_speed = 25
-small_perimeter_speed = 10
+small_perimeter_speed = 15
 solid_infill_speed = 40
 support_material_extrusion_width = 0.2
 top_solid_infill_speed = 30
@@ -549,7 +549,7 @@ filament_diameter = 1.75
 filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 
@@ -643,7 +643,6 @@ first_layer_bed_temperature = 105
 first_layer_temperature = 270
 max_fan_speed = 20
 min_fan_speed = 10
-min_print_speed = 5
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
 temperature = 270
 
@@ -657,7 +656,6 @@ extrusion_multiplier = 1.2
 filament_colour = #804040
 filament_max_volumetric_speed = 10
 first_layer_temperature = 200
-min_print_speed = 5
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 200
 
@@ -823,7 +821,6 @@ first_layer_bed_temperature = 60
 first_layer_temperature = 240
 max_fan_speed = 5
 min_fan_speed = 0
-min_print_speed = 5
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 250
 
@@ -856,7 +853,6 @@ first_layer_bed_temperature = 60
 first_layer_temperature = 215
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 15
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 210
 
@@ -877,7 +873,6 @@ first_layer_bed_temperature = 100
 first_layer_temperature = 220
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 15
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
 temperature = 220
 
@@ -938,11 +933,11 @@ retract_lift_below = 199
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 80
-single_extruder_multi_material = 1
-printer_model = MK2SMM
 parking_pos_retraction = 92
 cooling_tube_length = 5
 cooling_tube_retraction = 91.5
+single_extruder_multi_material = 1
+printer_model = MK2SMM
 
 [printer:*mm-single*]
 inherits = *multimaterial*
diff --git a/xs/src/slic3r/GUI/Field.cpp b/xs/src/slic3r/GUI/Field.cpp
index 0fcf480e3..4febae362 100644
--- a/xs/src/slic3r/GUI/Field.cpp
+++ b/xs/src/slic3r/GUI/Field.cpp
@@ -183,14 +183,21 @@ namespace Slic3r { namespace GUI {
 			//! to allow the default handling
 			event.Skip();
 			//! eliminating the g-code pop up text description
-			temp->GetToolTip()->Enable(false);
+			bool flag = false;
+#ifdef __WXGTK__
+			// I have no idea why, but on GTK flag works in other way
+			flag = true;
+#endif // __WXGTK__
+			temp->GetToolTip()->Enable(flag);
 		}), temp->GetId());
 
+#if !defined(__WXGTK__)
 		temp->Bind(wxEVT_KILL_FOCUS, ([this, temp](wxEvent& e)
 		{
 			e.Skip();//	on_kill_focus(e);
 			temp->GetToolTip()->Enable(true);
 		}), temp->GetId());
+#endif // __WXGTK__
 
 		temp->Bind(wxEVT_TEXT, ([this](wxCommandEvent) { on_change_field(); }), temp->GetId());