3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Localization: New POT and updated dictionaries for CZ, PL, IT and ES

Browse source 
+ Fix for minor issue https://github.com/prusa3d/PrusaSlicer/issues/5672#issuecomment-1160245417
+ Fix for #7858 - Small formatting error in dutch language
+ Community PO-files are extended by new phrases
This commit is contained in:
YuSanka 2022-06-20 15:00:08 +02:00
parent 234e9066d2
commit 4c65e468de
35 changed files with 49083 additions and 34988 deletions
Download patch file Download diff file Expand all files Collapse all files

14
src/libslic3r/PrintConfig.cpp
View file

@ -1819,8 +1819,8 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("This experimental setting is used to limit the speed of change in extrusion rate "
"for a transition from higher speed to lower speed. "
"A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45 mm extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) "
"to 5.4 mm³/s (feedrate 20 mm/s) will take at least 2 seconds.");
"of 5.4 mm³/s (0.45 mm extrusion width, 0.2 mm extrusion height, feedrate 60 mm/s) "
"to 1.8 mm³/s (feedrate 20 mm/s) will take at least 2 seconds.");
def->sidetext = L("mm³/s²");
def->min = 0;
def->mode = comExpert;
@ -3078,7 +3078,7 @@ void PrintConfigDef::init_fff_params()
def = this->add("wall_transition_length", coFloat);
def->label = L("Perimeter transition length");
def->category = L("Advanced");
def->tooltip = L("When transitioning between different numbers of perimeters as the part becomes"
def->tooltip = L("When transitioning between different numbers of perimeters as the part becomes "
"thinner, a certain amount of space is allotted to split or join the perimeter segments.");
def->sidetext = L("mm");
def->mode = comExpert;
@ -3093,9 +3093,9 @@ void PrintConfigDef::init_fff_params()
"- margin, 2 * Minimum perimeter width + margin]. Increasing this margin "
"reduces the number of transitions, which reduces the number of extrusion "
"starts/stops and travel time. However, large extrusion width variation can lead to "
"under- or overextrusion problems."
"If expressed as percentage (for example 25%), it will be computed over nozzle diameter.");
def->sidetext = L("mm");
"under- or overextrusion problems. "
"If expressed as a percentage (for example 25%), it will be computed based on the nozzle diameter.");
def->sidetext = L("mm or %");
def->mode = comExpert;
def->min = 0;
def->set_default_value(new ConfigOptionFloatOrPercent(25, true));
@ -3169,7 +3169,7 @@ void PrintConfigDef::init_fff_params()
def->tooltip = L("Width of the perimeter that will replace thin features (according to the Minimum feature size) "
"of the model. If the Minimum perimeter width is thinner than the thickness of the feature,"
" the perimeter will become as thick as the feature itself. "
"If expressed as percentage (for example 85%), it will be computed over nozzle diameter.");
"If expressed as a percentage (for example 85%), it will be computed based on the nozzle diameter.");
def->sidetext = L("mm or %");
def->mode = comExpert;
def->min = 0;