diff --git a/resources/profiles/PrusaResearch.idx b/resources/profiles/PrusaResearch.idx index d63336c2e..277bf157a 100644 --- a/resources/profiles/PrusaResearch.idx +++ b/resources/profiles/PrusaResearch.idx @@ -1,4 +1,5 @@ min_slic3r_version = 2.4.0-rc +1.4.5 Added MMU2/S profiles for 0.25mm nozzle. Updated FW version. Enabled g-code thumbnails for MK3 family printers. Updated end g-code. 1.4.4 Added multiple Fiberlogy filament profiles. Updated Extrudr filament profiles. 1.4.3 Added new filament profiles and SLA materials. 1.4.2 Added SLA material profiles. @@ -24,6 +25,7 @@ min_slic3r_version = 2.4.0-alpha0 1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values. 1.3.0-alpha0 Disabled thick bridges, updated support settings. min_slic3r_version = 2.3.2-alpha0 +1.3.7 Updated firmware version. 1.3.6 Updated firmware version. 1.3.5 Added material profiles for Prusament Resins. 1.3.4 Added material profiles for new Prusament Resins. Added profiles for multiple BASF filaments. @@ -32,6 +34,7 @@ min_slic3r_version = 2.3.2-alpha0 1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S). 1.3.0 Added SL1S SPEED profiles. min_slic3r_version = 2.3.0-rc1 +1.2.12 Updated firmware version. 1.2.11 Updated firmware version. 1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle). 1.2.9 Added material profiles for Prusament Resin. @@ -52,6 +55,7 @@ min_slic3r_version = 2.3.0-alpha4 1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles. 1.2.0-alpha0 Added filament spool weights min_slic3r_version = 2.2.0-alpha3 +1.1.16 Updated firmware version. 1.1.15 Updated firmware version. 1.1.14 Updated firmware version. 1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles. diff --git a/resources/profiles/PrusaResearch.ini b/resources/profiles/PrusaResearch.ini index 4af1e35ed..4c495cb72 100644 --- a/resources/profiles/PrusaResearch.ini +++ b/resources/profiles/PrusaResearch.ini @@ -5,7 +5,7 @@ name = Prusa Research # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 1.4.4 +config_version = 1.4.5 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/ changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% @@ -288,6 +288,7 @@ output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{layer_heig thick_bridges = 0 bridge_flow_ratio = 1 bridge_speed = 20 +wipe_tower_bridging = 6 [print:*0.25nozzleMK3*] inherits = *0.25nozzle* @@ -308,6 +309,7 @@ max_print_speed = 80 perimeters = 3 fill_pattern = grid fill_density = 20% +wipe_tower_bridging = 6 [print:*0.25nozzleMINI*] inherits = *0.25nozzleMK3* @@ -691,6 +693,7 @@ solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_contact_distance = 0.07 raft_contact_distance = 0.07 +single_extruder_multi_material_priming = 0 [print:0.15mm OPTIMAL @0.25 nozzle] inherits = *0.15mm*; *0.25nozzle* @@ -707,6 +710,38 @@ solid_infill_speed = 40 top_solid_infill_speed = 30 support_material_contact_distance = 0.08 raft_contact_distance = 0.07 +perimeter_extrusion_width = 0.27 +external_perimeter_extrusion_width = 0.27 +infill_extrusion_width = 0.27 +solid_infill_extrusion_width = 0.27 +single_extruder_multi_material_priming = 0 + +[print:0.15mm SOLUBLE FULL @0.25 nozzle] +inherits = 0.15mm OPTIMAL @0.25 nozzle +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders>1 +support_material_contact_distance = 0 +raft_contact_distance = 0 +wipe_tower_bridging = 5 +solid_infill_speed = 40 +support_material_extruder = 5 +support_material_interface_extruder = 5 +support_material_with_sheath = 1 +support_material_interface_layers = 4 +support_material_threshold = 60 +support_material = 1 +support_material_synchronize_layers = 1 +support_material_xy_spacing = 100% +support_material_style = snug +raft_first_layer_expansion = 2 +support_material_interface_spacing = 0.05 +single_extruder_multi_material_priming = 0 + +[print:0.15mm SOLUBLE INTERFACE @0.25 nozzle] +inherits = 0.15mm SOLUBLE FULL @0.25 nozzle +support_material_extruder = 0 +support_material_interface_extruder = 5 +support_material_with_sheath = 0 +support_material_style = grid ## MK2 - 0.6mm nozzle @@ -992,7 +1027,7 @@ raft_contact_distance = 0.07 [print:0.07mm ULTRADETAIL @0.25 nozzle MK3] inherits = *0.07mm*; *0.25nozzle*; *MK3* -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 infill_speed = 30 solid_infill_speed = 30 support_material_speed = 30 @@ -1017,6 +1052,36 @@ fill_pattern = grid fill_density = 20% support_material_contact_distance = 0.08 raft_contact_distance = 0.07 +perimeter_extrusion_width = 0.27 +external_perimeter_extrusion_width = 0.27 +infill_extrusion_width = 0.27 +solid_infill_extrusion_width = 0.27 + +[print:0.15mm SOLUBLE FULL @0.25 nozzle MK3] +inherits = 0.15mm QUALITY @0.25 nozzle MK3 +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.25 and num_extruders>1 +support_material_contact_distance = 0 +raft_contact_distance = 0 +wipe_tower_bridging = 5 +solid_infill_speed = 40 +support_material_extruder = 5 +support_material_interface_extruder = 5 +support_material_with_sheath = 1 +support_material_interface_layers = 4 +support_material_threshold = 60 +support_material = 1 +support_material_synchronize_layers = 1 +support_material_xy_spacing = 100% +support_material_style = snug +raft_first_layer_expansion = 2 +support_material_interface_spacing = 0.05 + +[print:0.15mm SOLUBLE INTERFACE @0.25 nozzle MK3] +inherits = 0.15mm SOLUBLE FULL @0.25 nozzle MK3 +support_material_extruder = 0 +support_material_interface_extruder = 5 +support_material_with_sheath = 0 +support_material_style = grid ## MK3 - 0.6mm nozzle @@ -1315,6 +1380,10 @@ fill_pattern = grid fill_density = 20% support_material_contact_distance = 0.08 raft_contact_distance = 0.07 +perimeter_extrusion_width = 0.27 +external_perimeter_extrusion_width = 0.27 +infill_extrusion_width = 0.27 +solid_infill_extrusion_width = 0.27 # MINI - 0.6mm nozzle @@ -3331,7 +3400,7 @@ compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_model!="MINI [filament:*ABS MMU2*] inherits = Prusa ABS -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material filament_cooling_final_speed = 50 filament_cooling_initial_speed = 10 filament_cooling_moves = 5 @@ -3346,6 +3415,92 @@ filament_unloading_speed = 20 inherits = *ABS MMU2* filament_vendor = Generic +[filament:Generic ABS @MMU2 0.25] +inherits = Generic ABS @MMU2 +filament_max_volumetric_speed = 1.7 +filament_ramming_parameters = "200 110 3.41935 3.6129 3.93548 4.35484 4.87097 5.51613 6.25806 7.06452 7.80645 8.35484 8.70968 8.83871| 0.05 3.37419 0.45 3.70322 0.95 4.5742 1.45 5.78387 1.95 7.44194 2.45 8.58065 2.95 8.89045 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Generic PLA @MMU2 0.25] +inherits = Generic PLA @MMU2 +filament_max_volumetric_speed = 3 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 120 2.70968 2.93548 3.29032 3.80645 4.58065 5.54839 6.54839 7.3871 7.93548 8.19355 8.16129 8.03226| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 7.98716 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Prusa PLA @MMU2 0.25] +inherits = Generic PLA @MMU2 0.25 + +[filament:Prusament PLA @MMU2 0.25] +inherits = Prusament PLA @MMU2 +filament_max_volumetric_speed = 3 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 120 2.70968 2.93548 3.29032 3.80645 4.58065 5.54839 6.54839 7.3871 7.93548 8.19355 8.16129 8.03226| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 7.98716 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Prusament PVB @MMU2 0.25] +inherits = Prusament PVB @MMU2 +filament_max_volumetric_speed = 2 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Prusament ASA @MMU2 0.25] +inherits = Prusament ASA @MMU2 +filament_max_volumetric_speed = 1.7 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 110 3.41935 3.6129 3.93548 4.35484 4.87097 5.51613 6.25806 7.06452 7.80645 8.35484 8.70968 8.83871| 0.05 3.37419 0.45 3.70322 0.95 4.5742 1.45 5.78387 1.95 7.44194 2.45 8.58065 2.95 8.89045 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Prusament PC Blend @MMU2 0.25] +inherits = Prusament PC Blend @MMU2 +filament_max_volumetric_speed = 2 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 120 2.70968 2.93548 3.32258 3.83871 4.58065 5.54839 6.51613 7.35484 7.93548 8.16129| 0.05 2.66451 0.45 3.05805 0.95 4.05807 1.45 5.97742 1.95 7.69999 2.45 8.1936 2.95 11.342 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Prusa ABS @MMU2 0.25] +inherits = Prusa ABS @MMU2 +filament_max_volumetric_speed = 1.7 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 110 3.41935 3.6129 3.93548 4.35484 4.87097 5.51613 6.25806 7.06452 7.80645 8.35484 8.70968 8.83871| 0.05 3.37419 0.45 3.70322 0.95 4.5742 1.45 5.78387 1.95 7.44194 2.45 8.58065 2.95 8.89045 3.45 13.0839 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Generic PETG @MMU2 0.25] +inherits = Generic PETG @MMU2 +filament_max_volumetric_speed = 2 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Prusa PETG @MMU2 0.25] +inherits = Prusa PETG @MMU2 +filament_max_volumetric_speed = 2 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Prusament PETG @MMU2 0.25] +inherits = Prusament PETG @MMU2 +filament_max_volumetric_speed = 2 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 140 4.70968 4.74194 4.77419 4.80645 4.83871 4.87097 4.90323 5 5.25806 5.67742 6.29032 7.06452 7.83871 8.3871| 0.05 4.72901 0.45 4.73545 0.95 4.83226 1.45 4.88067 1.95 5.05483 2.45 5.93553 2.95 7.53556 3.45 8.6323 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:Verbatim BVOH @MMU2 0.25] +inherits = Verbatim BVOH @MMU2 +filament_max_volumetric_speed = 2 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 110 1.74194 1.90323 2.16129 2.48387 2.83871 3.25806 3.83871 4.6129 5.41935 5.96774| 0.05 1.69677 0.45 1.96128 0.95 2.63872 1.45 3.46129 1.95 4.99031 2.45 6.12908 2.95 8.30974 3.45 11.4065 3.95 7.6 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + +[filament:PrimaSelect PVA+ @MMU2 0.25] +inherits = PrimaSelect PVA+ @MMU2 +filament_max_volumetric_speed = 2 +filament_minimal_purge_on_wipe_tower = 10 +filament_ramming_parameters = "200 110 2.32258 2.48387 2.67742 2.87097 3.03226 3.22581 3.48387 3.80645 4.29032 5 5.93548 7 7.90323 8.48387 8.80645 8.90323| 0.05 2.27741 0.45 2.54192 0.95 2.9613 1.45 3.33225 1.95 4.02257 2.45 5.48393 2.95 7.72915 3.45 8.76139 3.95 8.95485 4.45 7.6 4.95 7.6" +compatible_printers_condition = nozzle_diameter[0]==0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material + [filament:Generic HIPS @MMU2] inherits = *ABS MMU2* filament_vendor = Generic @@ -3585,7 +3740,7 @@ filament_type = PETG [filament:*PET MMU2*] inherits = Prusa PETG -compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.6 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 230 first_layer_temperature = 230 filament_cooling_final_speed = 1 @@ -4041,7 +4196,7 @@ start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and no [filament:*PLA MMU2*] inherits = Prusa PLA -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 205 filament_cooling_final_speed = 2 filament_cooling_initial_speed = 3 @@ -4290,7 +4445,7 @@ temperature = 210 [filament:Verbatim BVOH @MMU2] inherits = Verbatim BVOH filament_vendor = Verbatim -compatible_printers_condition = nozzle_diameter[0]!=0.8 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.8 and nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material temperature = 195 fan_always_on = 1 first_layer_temperature = 200 @@ -4310,7 +4465,7 @@ filament_loading_speed_start = 19 [filament:PrimaSelect PVA+ @MMU2] inherits = *common* filament_vendor = PrimaSelect -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material +compatible_printers_condition = nozzle_diameter[0]!=0.25 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material bed_temperature = 60 bridge_fan_speed = 100 cooling = 0 @@ -8199,7 +8354,7 @@ bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n between_objects_gcode = deretract_speed = 0 -end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors extruder_offset = 0x0 gcode_flavor = marlin silent_mode = 0 @@ -8280,7 +8435,7 @@ printer_model = MK2SMM [printer:*mm-single*] inherits = *multimaterial* -end_gcode = G1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n\n +end_gcode = G1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n\n printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.2.3 ; tell printer latest fw version\nM204 S[machine_max_acceleration_extruding] T[machine_max_acceleration_retracting] ; MK2 firmware only supports the old M204 format\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0\nM203 E100\nM92 E140\nG1 Z0.25 F7200\nG1 X50 E80 F1000\nG1 X160 E20 F1000\nG1 Z0.2 F7200\nG1 X220 E13 F1000\nG1 X240 E0 F1000\nG92 E0 default_print_profile = 0.15mm OPTIMAL @@ -8288,7 +8443,7 @@ default_print_profile = 0.15mm OPTIMAL [printer:*mm-multi*] inherits = *multimaterial* high_current_on_filament_swap = 1 -end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\n{endif}\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors +end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100\nG91\nG1 Z1 F7200\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7\nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3\nG1 E-15 F5000\nG1 E-50 F5400\nG1 E-15 F3000\nG1 E-12 F2000\nG1 F1600\nG1 X0 Y1 E3\nG1 X50 Y1 E-5\nG1 F2000\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-5\nG1 F2400\nG1 X0 Y1 E5\nG1 X50 Y1 E-3\nG4 S0\n{endif}\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)}{endif} ; Move print head up\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors extruder_colour = #FFAA55;#E37BA0;#4ECDD3;#FB7259 nozzle_diameter = 0.4,0.4,0.4,0.4 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN @@ -8364,21 +8519,21 @@ inherits = Original Prusa i3 MK2S printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 [printer:Original Prusa i3 MK2.5 0.25 nozzle] inherits = Original Prusa i3 MK2S 0.25 nozzle printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 [printer:Original Prusa i3 MK2.5 0.6 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle printer_model = MK2.5 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 [printer:Original Prusa i3 MK2.5 0.8 nozzle] inherits = Original Prusa i3 MK2S 0.6 nozzle @@ -8390,7 +8545,7 @@ min_layer_height = 0.2 retract_length = 1 remaining_times = 1 machine_max_jerk_e = 4.5 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change @@ -8403,8 +8558,8 @@ max_print_height = 200 default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; load to nozzle\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.20 F1000\nG1 X5 E4 F1000\nG92 E0\n -end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n; select extruder\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; load to nozzle\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.20 F1000\nG1 X5 E4 F1000\nG92 E0\n +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors [printer:Original Prusa i3 MK2.5 MMU2 Single 0.8 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle @@ -8427,8 +8582,8 @@ printer_notes = Don't remove the following keywords! These keywords are used in single_extruder_multi_material = 1 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n -end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S] inherits = Original Prusa i3 MK2.5 @@ -8454,8 +8609,8 @@ max_print_height = 200 default_print_profile = 0.15mm OPTIMAL @MK2.5 default_filament_profile = Prusament PLA printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n -end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors [printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S Single @@ -8465,7 +8620,7 @@ min_layer_height = 0.2 nozzle_diameter = 0.8 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change @@ -8489,7 +8644,7 @@ nozzle_diameter = 0.25 printer_variant = 0.25 retract_lift = 0.15 default_print_profile = 0.10mm DETAIL 0.25 nozzle -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change [printer:Original Prusa i3 MK2.5S MMU2S] @@ -8501,8 +8656,8 @@ printer_notes = Don't remove the following keywords! These keywords are used in single_extruder_multi_material = 1 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n -end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM900 K0 ; reset LA\nM84 ; disable motors\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n [printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle] inherits = Original Prusa i3 MK2.5S MMU2S @@ -8522,6 +8677,26 @@ printer_variant = 0.6 default_print_profile = 0.20mm NORMAL @0.6 nozzle color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change +[printer:Original Prusa i3 MK2.5S MMU2S 0.25 nozzle] +inherits = Original Prusa i3 MK2.5S MMU2S +nozzle_diameter = 0.25,0.25,0.25,0.25,0.25 +max_layer_height = 0.15 +min_layer_height = 0.05 +printer_variant = 0.25 +default_print_profile = 0.10mm DETAIL @0.25 nozzle +default_filament_profile = Prusament PLA @MMU2 0.25 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change + +[printer:Original Prusa i3 MK2.5 MMU2 0.25 nozzle] +inherits = Original Prusa i3 MK2.5 MMU2 +nozzle_diameter = 0.25,0.25,0.25,0.25,0.25 +max_layer_height = 0.15 +min_layer_height = 0.05 +printer_variant = 0.25 +default_print_profile = 0.10mm DETAIL @0.25 nozzle +default_filament_profile = Prusament PLA @MMU2 0.25 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change + ## 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment. ## [printer:Original Prusa i3 MK2.5S MMU2S 0.8 nozzle] @@ -8532,7 +8707,7 @@ color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change ## printer_variant = 0.8 ## retract_length = 1 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle -## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n ## [printer:Original Prusa i3 MK2.5 MMU2 0.8 nozzle] ## inherits = Original Prusa i3 MK2.5 MMU2 @@ -8542,7 +8717,7 @@ color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change ## printer_variant = 0.8 ## retract_length = 1 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle -## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n # XXXXXXXXXXXXXXXXX # XXX--- MK3 ---XXX @@ -8550,7 +8725,7 @@ color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change [printer:Original Prusa i3 MK3] inherits = *common* -end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors machine_max_acceleration_e = 5000,5000 machine_max_acceleration_extruding = 1250,1250 machine_max_acceleration_retracting = 1250,1250 @@ -8572,9 +8747,10 @@ remaining_times = 1 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n retract_lift_below = 209 max_print_height = 210 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} printer_model = MK3 default_print_profile = 0.15mm QUALITY @MK3 +thumbnails = 160x120 [printer:Original Prusa i3 MK3 0.25 nozzle] inherits = Original Prusa i3 MK3 @@ -8583,7 +8759,7 @@ max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E8 F700 ; intro line\nG1 X100 E12.5 F700 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E8 F700 ; intro line\nG1 X100 E12.5 F700 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif}\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change @@ -8593,7 +8769,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S{if layer_height<0.075}100{else}95{endif} default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change @@ -8604,7 +8780,7 @@ max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S95 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0\nM221 S95 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change @@ -8676,8 +8852,8 @@ default_filament_profile = Prusament PLA @MMU2 inherits = *mm2* single_extruder_multi_material = 0 default_filament_profile = Prusament PLA -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} -end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors [printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle] inherits = Original Prusa i3 MK3 MMU2 Single @@ -8686,7 +8862,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change @@ -8698,7 +8874,7 @@ max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change @@ -8711,7 +8887,7 @@ max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F1000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F1000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change @@ -8720,16 +8896,16 @@ inherits = *mm2* machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} -end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single] inherits = *mm2s* renamed_from = "Original Prusa i3 MK3S MMU2S Single" single_extruder_multi_material = 0 default_filament_profile = Prusament PLA -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} -end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+10, max_print_height)}{endif} F720 ; Move print head up\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle] inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single @@ -8739,7 +8915,7 @@ nozzle_diameter = 0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change @@ -8751,7 +8927,7 @@ max_layer_height = 0.6 min_layer_height = 0.2 printer_variant = 0.8 retract_length = 1 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.40mm QUALITY @0.8 nozzle default_filament_profile = Prusament PLA @0.8 nozzle color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change @@ -8765,7 +8941,7 @@ max_layer_height = 0.15 min_layer_height = 0.05 printer_variant = 0.25 retract_lift = 0.15 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F1400\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E value below. Excessive value can damage the printer.\n{if print_settings_id=~/.*@0.25 nozzle MK3.*/}M907 E430 ; set extruder motor current{endif} default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change @@ -8775,8 +8951,8 @@ renamed_from = "Original Prusa i3 MK3S MMU2S" machine_max_acceleration_e = 8000,8000 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} -end_gcode = ; Lift print head a bit\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} ; Move print head up\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nG1 X0 Y210 F3000 ; home X axis\nM84 ; disable motors\n +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif} +end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n ## 0.6mm nozzle MMU2/S printer profiles @@ -8787,7 +8963,7 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change @@ -8797,10 +8973,30 @@ nozzle_diameter = 0.6,0.6,0.6,0.6,0.6 max_layer_height = 0.40 min_layer_height = 0.15 printer_variant = 0.6 -start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 +start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0 default_print_profile = 0.30mm QUALITY @0.6 nozzle MK3 color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change +[printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.25 nozzle] +inherits = Original Prusa i3 MK3S & MK3S+ MMU2S 0.6 nozzle +nozzle_diameter = 0.25,0.25,0.25,0.25,0.25 +max_layer_height = 0.15 +min_layer_height = 0.05 +printer_variant = 0.25 +default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 +default_filament_profile = Prusament PLA @MMU2 0.25 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change + +[printer:Original Prusa i3 MK3 MMU2 0.25 nozzle] +inherits = Original Prusa i3 MK3 MMU2 0.6 nozzle +nozzle_diameter = 0.25,0.25,0.25,0.25,0.25 +max_layer_height = 0.15 +min_layer_height = 0.05 +printer_variant = 0.25 +default_print_profile = 0.10mm DETAIL @0.25 nozzle MK3 +default_filament_profile = Prusament PLA @MMU2 0.25 +color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change + ## 0.8mm nozzle MMU2/S printer profiles ## For later use. 0.8mm nozzle profiles are only available for MMU2 Single mode at the moment. @@ -8811,7 +9007,7 @@ color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change ## max_layer_height = 0.6 ## min_layer_height = 0.2 ## printer_variant = 0.8 -## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E32.0 F1073.0\nG1 X5.0 E32.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle ## [printer:Original Prusa i3 MK3S & MK3S+ MMU2S 0.8 nozzle] @@ -8820,7 +9016,7 @@ color_change_gcode = M600\nG1 E0.5 F1500 ; prime after color change ## max_layer_height = 0.6 ## min_layer_height = 0.2 ## printer_variant = 0.8 -## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.10.1 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 +## start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0 ## default_print_profile = 0.40mm QUALITY @0.8 nozzle ## MINI diff --git a/resources/profiles/TriLAB.idx b/resources/profiles/TriLAB.idx index b64aab27b..1b12439f7 100644 --- a/resources/profiles/TriLAB.idx +++ b/resources/profiles/TriLAB.idx @@ -1,3 +1,5 @@ +min_slic3r_version = 2.4.1-rc1 +1.0.0 Added AzteQ Industrial profiles for 0.8 nozzle, updated spool weight and filament cost, some minor setting improvements min_slic3r_version = 2.3.2-alpha0 0.0.9 Added AzteQ Industrial materials PC/ABS (Fillamentum), PC-Max (Polymaker), Nylon FX256 (Fillamentum), Added DeltiQ 2 materials Nylon PA12 (Fiberlogy), Nylon CF15 Carbon (Fillamentum), PEBA 90A - FlexFill (Fillamentum), MoldLay (Wax-Alike), disabled retract only when crossing perimeters, some minor setting improvements 0.0.8 Added new AzteQ Industrial printer, added DeltiQ 2 profiles for 0.6mm nozzle, added material ASA 275 (Spectrum), some minor setting improvements diff --git a/resources/profiles/TriLAB.ini b/resources/profiles/TriLAB.ini index 8a68b8219..a5b194eca 100644 --- a/resources/profiles/TriLAB.ini +++ b/resources/profiles/TriLAB.ini @@ -6,7 +6,7 @@ name = TriLAB # Configuration version of this file. Config file will only be installed, if the config_version differs. # This means, the server may force the PrusaSlicer configuration to be downgraded. -config_version = 0.0.9 +config_version = 1.0.0 # Where to get the updates from? config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/ # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1% @@ -17,12 +17,12 @@ config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/Prus [printer_model:AQI] name = AzteQ Industrial -variants = 0.4; 0.6 +variants = 0.4; 0.6; 0.8 technology = FFF family = AzteQ bed_model = aq_bed.stl bed_texture = aq_bed_texture.svg -default_materials = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum);AzteQ Industrial (Door Opened) - PLA - Generic;AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum);AzteQ Industrial - ABS - ExtraFill (Fillamentum);AzteQ Industrial - ABS - Generic;AzteQ Industrial - ASA - ExtraFill (Fillamentum);AzteQ Industrial - ASA - Generic;AzteQ Industrial - ASA - Prusament (Prusa);AzteQ Industrial - PA - Nylon PA12 (Fiberlogy);AzteQ Industrial - PC Blend - Prusament (Prusa);AzteQ Industrial - PC - PolyMax (Polymaker);AzteQ Industrial - PC - PolyMax (Polymaker) @0.6 nozzle;AzteQ Industrial - PC/ABS - (Fillamentum);AzteQ Industrial - PC/ABS - (Fillamentum) @0.6 nozzle;AzteQ Industrial - PA - Nylon FX256 (Fillamentum);AzteQ Industrial - PA - Nylon FX256 (Fillamentum) @0.6 nozzle +default_materials = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum);AzteQ Industrial (Door Opened) - PLA - Generic;AzteQ Industrial (PLA Printhead) - PLA - ExtraFill (Fillamentum);AzteQ Industrial - ABS - ExtraFill (Fillamentum);AzteQ Industrial - ABS - Generic;AzteQ Industrial - ASA - ExtraFill (Fillamentum);AzteQ Industrial - ASA - Generic;AzteQ Industrial - ASA - Prusament (Prusa);AzteQ Industrial - PA - Nylon PA12 (Fiberlogy);AzteQ Industrial - PC Blend - Prusament (Prusa);AzteQ Industrial - PC - PolyMax (Polymaker);AzteQ Industrial - PC - PolyMax (Polymaker) @0.6 nozzle;AzteQ Industrial - PC/ABS - (Fillamentum);AzteQ Industrial - PC/ABS - (Fillamentum) @0.6 nozzle;AzteQ Industrial - PA - Nylon FX256 (Fillamentum);AzteQ Industrial - PA - Nylon FX256 (Fillamentum) @0.6 nozzle;AzteQ Industrial - ABS - Generic @0.8 nozzle;AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.8 nozzle;AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.8 nozzle;AzteQ Industrial - ASA - Prusament (Prusa) @0.8 nozzle;AzteQ Industrial - PC Blend - Prusament (Prusa) @0.8 nozzle [printer_model:DQ2] name = DeltiQ 2 @@ -569,6 +569,106 @@ inherits = AzteQ Industrial 0.30mm Normal @0.6 nozzle fill_density = 10% layer_height = 0.35 +[print:AzteQ Industrial 0.40mm Normal @0.8 nozzle] +inherits = AzteQ Industrial 0.20mm Normal +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.8 +avoid_crossing_perimeters = 0 +avoid_crossing_perimeters_max_detour = 0 +bottom_solid_layers = 4 +bottom_solid_min_thickness = 0.7 +bridge_flow_ratio = 0.95 +bridge_speed = 30 +dont_support_bridges = 0 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 0 +external_perimeter_extrusion_width = 0.8 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extrusion_width = 0.8 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_extrusion_width = 0.8 +first_layer_height = 0.4 +first_layer_speed = 20 +first_layer_speed_over_raft = 30 +gap_fill_enabled = 1 +gap_fill_speed = 40 +infill_extrusion_width = 0.8 +infill_first = 0 +infill_overlap = 25% +infill_speed = 60 +layer_height = 0.4 +max_print_speed = 60 +max_volumetric_speed = 0 +only_retract_when_crossing_perimeters = 1 +overhangs = 1 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.8 +perimeter_speed = 45 +perimeters = 2 +raft_contact_distance = 0.1 +raft_expansion = 1.5 +raft_first_layer_density = 90% +raft_first_layer_expansion = 3 +raft_layers = 0 +skirt_distance = 10 +skirt_height = 2 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.8 +solid_infill_speed = 60 +support_material = 0 +support_material_angle = 30 +support_material_auto = 1 +support_material_bottom_contact_distance = 0 +support_material_bottom_interface_layers = -1 +support_material_buildplate_only = 0 +support_material_closing_radius = 2 +support_material_contact_distance = 0.1 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.8 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 4 +support_material_interface_pattern = auto +support_material_interface_spacing = 0.4 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_style = grid +support_material_synchronize_layers = 0 +support_material_threshold = 40 +support_material_with_sheath = 0 +support_material_xy_spacing = 0.6 +thick_bridges = 1 +thin_walls = 0 +threads = 12 +top_fill_pattern = monotonic +top_infill_extrusion_width = 0.8 +top_solid_infill_speed = 40 +top_solid_layers = 5 +top_solid_min_thickness = 0.7 +travel_speed = 200 +travel_speed_z = 0 + +[print:AzteQ Industrial 0.40mm Vase @0.8 nozzle] +inherits = AzteQ Industrial 0.40mm Normal @0.8 nozzle +bottom_solid_layers = 4 +perimeters = 1 +top_solid_layers = 0 +fill_density = 0 +support_material = 0 +spiral_vase = 1 +ensure_vertical_shell_thickness = 1 +thin_walls = 0 + # DeltiQ filaments # [filament:*DeltiQ common*] @@ -586,6 +686,8 @@ filament_soluble = 0 filament_toolchange_delay = 0 start_filament_gcode = "; FILAMENT_START_GCODE" end_filament_gcode = "; FILAMENT_END_GCODE" +filament_cost = 0 +filament_spool_weight = 250 filament_vendor = Generic # DeltiQ PLA filaments # @@ -597,7 +699,6 @@ bridge_fan_speed = 100 cooling = 1 fan_always_on = 1 fan_below_layer_time = 100 -filament_cost = 750 filament_density = 1.24 filament_max_volumetric_speed = 8 filament_retract_before_travel = 2 @@ -618,7 +719,8 @@ temperature = 215 [filament:DeltiQ - PLA - ExtraFill (Fillamentum)] inherits = DeltiQ - PLA - Generic -filament_cost = 750 +filament_cost = 24.27 +filament_spool_weight = 229 filament_density = 1.24 filament_vendor = Fillamentum @@ -652,6 +754,10 @@ filament_retract_speed = 28 [filament:DeltiQ FP - PLA - ExtraFill (Fillamentum)] inherits = DeltiQ FP - PLA - Generic +filament_cost = 24.27 +filament_spool_weight = 229 +filament_density = 1.24 +filament_vendor = Fillamentum [filament:DeltiQ FP2 - PLA - Generic] inherits = DeltiQ FP - PLA - Generic @@ -661,6 +767,10 @@ filament_retract_speed = 28 [filament:DeltiQ FP2 - PLA - ExtraFill (Fillamentum)] inherits = DeltiQ FP2 - PLA - Generic +filament_cost = 24.27 +filament_spool_weight = 229 +filament_density = 1.24 +filament_vendor = Fillamentum # DeltiQ PETG filaments # @@ -671,7 +781,6 @@ bridge_fan_speed = 50 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 480 filament_density = 1.27 filament_deretract_speed = 25 filament_max_volumetric_speed = 8 @@ -693,7 +802,8 @@ temperature = 245 [filament:DeltiQ - PETG (Devil Design)] inherits = DeltiQ - PETG - Generic -filament_cost = 480 +filament_cost = 16.53 +filament_spool_weight = 247 filament_density = 1.27 filament_vendor = DevilDesign @@ -733,6 +843,10 @@ filament_retract_speed = 25 [filament:DeltiQ FP - PETG (Devil Design)] inherits = DeltiQ FP - PETG - Generic +filament_cost = 16.53 +filament_spool_weight = 247 +filament_density = 1.27 +filament_vendor = DevilDesign [filament:DeltiQ FP2 - PETG - Generic] inherits = DeltiQ FP - PETG - Generic @@ -743,6 +857,10 @@ filament_retract_before_wipe = 0% [filament:DeltiQ FP2 - PETG (Devil Design)] inherits = DeltiQ FP2 - PETG - Generic +filament_cost = 16.53 +filament_spool_weight = 247 +filament_density = 1.27 +filament_vendor = DevilDesign # DeltiQ ABS filaments # @@ -753,7 +871,6 @@ bridge_fan_speed = 25 cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 639 filament_density = 1.04 filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 @@ -774,7 +891,8 @@ temperature = 255 [filament:DeltiQ - ABS - ExtraFill (Fillamentum)] inherits = DeltiQ - ABS - Generic -filament_cost = 639 +filament_cost = 24.27 +filament_spool_weight = 229 filament_density = 1.04 filament_vendor = Fillamentum @@ -791,6 +909,10 @@ filament_retract_speed = 25 [filament:DeltiQ FP - ABS - ExtraFill (Fillamentum)] inherits = DeltiQ FP - ABS - Generic +filament_cost = 24.27 +filament_spool_weight = 229 +filament_density = 1.04 +filament_vendor = Fillamentum [filament:DeltiQ FP2 - ABS - Generic] inherits = DeltiQ FP - ABS - Generic @@ -800,12 +922,18 @@ filament_retract_speed = 25 [filament:DeltiQ FP2 - ABS - ExtraFill (Fillamentum)] inherits = DeltiQ FP2 - ABS - Generic +filament_cost = 24.27 +filament_spool_weight = 229 +filament_density = 1.04 +filament_vendor = Fillamentum + # DeltiQ ASA filaments # [filament:DeltiQ - ASA - ExtraFill (Fillamentum)] inherits = DeltiQ - ABS - Generic -filament_cost = 739 +filament_cost = 29.53 +filament_spool_weight = 229 filament_density = 1.07 filament_type = ASA filament_vendor = Fillamentum @@ -827,6 +955,7 @@ filament_retract_speed = 25 inherits = DeltiQ FP - ASA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and printer_notes=~/.*FLEXPRINT2.*/ and nozzle_diameter[0]==0.4 + [filament:DeltiQ - ASA - ASA 275 (Spectrum)] inherits = *DeltiQ common* bed_temperature = 55 @@ -835,7 +964,7 @@ cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Spectrum -filament_cost = 587 +filament_cost = 29.86 filament_density = 1.07 filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 @@ -859,6 +988,7 @@ inherits = DeltiQ - ASA - ASA 275 (Spectrum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 + # DeltiQ CPE filaments # [filament:DeltiQ - CPE - HG100 (Fillamentum)] @@ -869,7 +999,8 @@ cooling = 1 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Fillamentum -filament_cost = 1003 +filament_cost = 39.07 +filament_spool_weight = 229 filament_density = 1.25 filament_deretract_speed = 25 filament_max_volumetric_speed = 8 @@ -910,6 +1041,7 @@ filament_retract_speed = 35 filament_deretract_speed = 0 filament_retract_before_wipe = 0% + # DeltiQ FLEX filaments # [filament:DeltiQ FP - FLEX - Generic] @@ -922,8 +1054,6 @@ disable_fan_first_layers = 1 extrusion_multiplier = 1.07 fan_always_on = 1 fan_below_layer_time = 20 -filament_vendor = Generic -filament_cost = 1870 filament_density = 1.22 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 @@ -954,8 +1084,6 @@ disable_fan_first_layers = 1 extrusion_multiplier = 1.07 fan_always_on = 1 fan_below_layer_time = 20 -filament_vendor = Fillamentum -filament_cost = 1870 filament_density = 1.22 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 @@ -986,7 +1114,8 @@ extrusion_multiplier = 1.10 fan_always_on = 1 fan_below_layer_time = 20 filament_vendor = Fillamentum -filament_cost = 1870 +filament_cost = 58.33 +filament_spool_weight = 229 filament_density = 1.22 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 @@ -1010,7 +1139,8 @@ temperature = 230 [filament:DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum)] inherits = DeltiQ FP2 - TPU 92A - FlexFill (Fillamentum) extrusion_multiplier = 1.10 -filament_cost = 1870 +filament_cost = 58.33 +filament_spool_weight = 229 filament_density = 1.23 filament_deretract_speed = nil filament_max_volumetric_speed = 3.0 @@ -1029,7 +1159,8 @@ extrusion_multiplier = 1.00 fan_always_on = 1 fan_below_layer_time = 10 filament_vendor = Smartfil -filament_cost = 1209 +filament_cost = 38.21 +filament_spool_weight = 250 filament_density = 1.21 filament_deretract_speed = nil filament_max_volumetric_speed = 2.5 @@ -1053,7 +1184,8 @@ temperature = 235 [filament:DeltiQ FP2 - PEBA 90A - FlexFill (Fillamentum)] inherits = DeltiQ FP2 - TPU 98A - FlexFill (Fillamentum) extrusion_multiplier = 1.1 -filament_cost = 3578 +filament_cost = 139.67 +filament_spool_weight = 229 filament_density = 1.00 filament_max_volumetric_speed = 2.9 filament_retract_length = 0.0 @@ -1070,7 +1202,8 @@ temperature = 245 [filament:DeltiQ - PA - Nylon PA12 (Fiberlogy)] inherits = DeltiQ - ABS - Generic bed_temperature = 100 -filament_cost = 1213 +filament_cost = 45.11 +filament_spool_weight = 230 filament_density = 1.02 filament_retract_length = 4.1 filament_type = NYLON @@ -1083,8 +1216,9 @@ temperature = 255 [filament:DeltiQ - PA - Nylon CF15 Carbon (Fillamentum)] inherits = DeltiQ - ABS - Generic bed_temperature = 100 -filament_cost = 2287 +filament_cost = 88.17 filament_density = 1.08 +filament_spool_weight = 229 filament_retract_length = 2.0 filament_type = NYLON first_layer_bed_temperature = 100 @@ -1097,7 +1231,8 @@ extrusion_multiplier = 0.95 [filament:DeltiQ - MoldLay (Wax-Alike)] inherits = DeltiQ - PLA - Generic bed_temperature = 50 -filament_cost = 1951 +filament_cost = 79.07 +filament_spool_weight = 230 filament_retract_length = 2.0 filament_type = PLA first_layer_bed_temperature = 50 @@ -1107,6 +1242,7 @@ min_fan_speed = 70 temperature = 175 filament_vendor = Wax-Alike + # AzteQ filaments # [filament:*AzteQ common*] @@ -1124,7 +1260,6 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 750 filament_density = 1.24 filament_deretract_speed = nil filament_max_volumetric_speed = 8 @@ -1161,8 +1296,9 @@ filament_max_volumetric_speed = 15 [filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum)] inherits = AzteQ Industrial (Door Opened) - PLA - Generic filament_vendor = Fillamentum -filament_cost = 750 +filament_cost = 24.27 filament_density = 1.24 +filament_spool_weight = 229 [filament:AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) @0.6 nozzle] inherits = AzteQ Industrial (Door Opened) - PLA - ExtraFill (Fillamentum) @@ -1178,8 +1314,9 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 750 +filament_cost = 24.27 filament_density = 1.24 +filament_spool_weight = 229 filament_deretract_speed = nil filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 @@ -1192,7 +1329,6 @@ filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 -filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = PLA filament_vendor = Fillamentum @@ -1221,7 +1357,6 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 639 filament_density = 1.04 filament_deretract_speed = nil filament_load_time = 0 @@ -1240,7 +1375,6 @@ filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_type = ABS -filament_vendor = Generic filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 255 @@ -1257,22 +1391,39 @@ inherits = AzteQ Industrial - ABS - Generic compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 +[filament:AzteQ Industrial - ABS - Generic @0.8 nozzle] +inherits = AzteQ Industrial - ABS - Generic +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.8 +first_layer_temperature = 255 +first_layer_bed_temperature = 100 +temperature = 255 +bed_temperature = 100 +max_fan_speed = 80 +min_fan_speed = 50 +filament_retract_length = 6.1 +filament_max_volumetric_speed = 0 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" + [filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum)] inherits = AzteQ Industrial - ABS - Generic filament_vendor = Fillamentum -filament_cost = 639 +filament_cost = 24.27 filament_density = 1.04 +filament_spool_weight = 229 [filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle] inherits = AzteQ Industrial - ABS - ExtraFill (Fillamentum) -compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 -filament_max_volumetric_speed = 15 + +[filament:AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.8 nozzle] +inherits = AzteQ Industrial - ABS - ExtraFill (Fillamentum) +extrusion_multiplier = 0.95 [filament:AzteQ Industrial - PC/ABS - (Fillamentum)] inherits = AzteQ Industrial - ABS - Generic filament_vendor = Fillamentum filament_type = PCABS -filament_cost = 1324 +filament_cost = 53.71 +filament_spool_weight = 229 filament_density = 1.07 bed_temperature = 100 filament_retract_length = 4.0 @@ -1292,7 +1443,8 @@ filament_max_volumetric_speed = 15 [filament:AzteQ Industrial - PC - PolyMax (Polymaker)] inherits = AzteQ Industrial - ABS - Generic filament_vendor = Polymaker -filament_cost = 1290 +filament_spool_weight = 230 +filament_cost = 52.40 filament_density = 1.21 bed_temperature = 100 filament_retract_length = 4.0 @@ -1318,7 +1470,6 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 739 filament_density = 1.07 filament_deretract_speed = nil filament_max_volumetric_speed = 8 @@ -1334,7 +1485,6 @@ filament_retract_speed = 25 filament_soluble = 0 filament_spool_weight = 0 filament_type = ASA -filament_vendor = Generic filament_wipe = 1 first_layer_bed_temperature = 100 first_layer_temperature = 265 @@ -1358,17 +1508,34 @@ first_layer_temperature = 255 temperature = 255 max_fan_speed = 80 min_fan_speed = 60 +filament_spool_weight = 229 +filament_cost = 29.53 +filament_density = 1.07 [filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.6 nozzle] inherits = AzteQ Industrial - ASA - ExtraFill (Fillamentum) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 +[filament:AzteQ Industrial - ASA - ExtraFill (Fillamentum) @0.8 nozzle] +inherits = AzteQ Industrial - ASA - ExtraFill (Fillamentum) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.8 +first_layer_bed_temperature = 100 +bed_temperature = 100 +first_layer_temperature = 250 +temperature = 250 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S50 ; Set and wait - chamber temperature" +max_fan_speed = 100 +min_fan_speed = 80 +filament_retract_length = 6.1 +filament_max_volumetric_speed = 0 + + [filament:AzteQ Industrial - ASA - Prusament (Prusa)] inherits = AzteQ Industrial - ASA - Generic -filament_cost = 680 +filament_cost = 29.16 filament_density = 1.07 -filament_spool_weight = 0 +filament_spool_weight = 201 filament_vendor = Prusa first_layer_temperature = 260 max_fan_speed = 70 @@ -1381,6 +1548,20 @@ inherits = AzteQ Industrial - ASA - Prusament (Prusa) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 +[filament:AzteQ Industrial - ASA - Prusament (Prusa) @0.8 nozzle] +inherits = AzteQ Industrial - ASA - Prusament (Prusa) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.8 +first_layer_bed_temperature = 100 +bed_temperature = 100 +first_layer_temperature = 250 +temperature = 250 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" +max_fan_speed = 80 +min_fan_speed = 50 +filament_retract_length = 4.1 +filament_max_volumetric_speed = 0 + + [filament:AzteQ Industrial - PA - Nylon PA12 (Fiberlogy)] inherits = *AzteQ common* bed_temperature = 100 @@ -1390,7 +1571,8 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 1212 +filament_cost = 45.11 +filament_spool_weight = 230 filament_density = 1.02 filament_deretract_speed = nil filament_max_volumetric_speed = 8 @@ -1404,7 +1586,6 @@ filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 -filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = NYLON filament_unload_time = 0 @@ -1436,7 +1617,8 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 1565 +filament_cost = 57.32 +filament_spool_weight = 229 filament_density = 1.01 filament_deretract_speed = nil filament_max_volumetric_speed = 8 @@ -1450,7 +1632,6 @@ filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 -filament_spool_weight = 0 filament_toolchange_delay = 0 filament_type = NYLON filament_unload_time = 0 @@ -1482,8 +1663,9 @@ disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 20 -filament_cost = 1156 +filament_cost = 61.98 filament_density = 1.22 +filament_spool_weight = 201 filament_deretract_speed = nil filament_max_volumetric_speed = 8 filament_retract_before_travel = 3 @@ -1496,7 +1678,6 @@ filament_retract_lift_below = nil filament_retract_restart_extra = nil filament_retract_speed = 25 filament_soluble = 0 -filament_spool_weight = 0 filament_type = PC filament_vendor = Prusa filament_wipe = 1 @@ -1516,6 +1697,18 @@ inherits = AzteQ Industrial - PC Blend - Prusament (Prusa) compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.6 filament_max_volumetric_speed = 15 +[filament:AzteQ Industrial - PC Blend - Prusament (Prusa) @0.8 nozzle] +inherits = AzteQ Industrial - PC Blend - Prusament (Prusa) +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_MODEL_AQI.*/ and nozzle_diameter[0]==0.8 +first_layer_bed_temperature = 100 +bed_temperature = 100 +first_layer_temperature = 275 +temperature = 275 +start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S75 ; Set and wait - chamber temperature" +max_fan_speed = 60 +min_fan_speed = 60 +filament_retract_length = 7.1 +filament_max_volumetric_speed = 0 # DeltiQ Printer # @@ -1752,6 +1945,15 @@ nozzle_diameter = 0.6 default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.6 nozzle" default_print_profile = AzteQ Industrial 0.30mm Normal @0.6 nozzle +[printer:AzteQ Industrial - 0.8 nozzle] +inherits = AzteQ Industrial +printer_variant = 0.8 +max_layer_height = 0.6 +min_layer_height = 0.2 +nozzle_diameter = 0.8 +default_filament_profile = "AzteQ Industrial - ABS - ExtraFill (Fillamentum) @0.8 nozzle" +default_print_profile = AzteQ Industrial 0.40mm Normal @0.8 nozzle + [presets] print = DeltiQ 0.20mm Normal printer = DeltiQ 2