3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Updated the bundled Slic3r profiles to match the current stable release

Browse Source 
profiles, adjusted the speed / acceleration / jerk limits to match
the current MK3 firmware.
This commit is contained in:
bubnikv 2018-02-02 10:51:08 +01:00
parent e94491ee8c
commit 4f427f8387
2 changed files with 56 additions and 56 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
resources/profiles/Original Prusa i3 MK2, MK2S, MK2MM and MK3.ini
View File

@ -1,4 +1,4 @@
# generated by Slic3r Prusa Edition 1.39.0 on 2018-01-06 at 15:09:55 # generated by Slic3r Prusa Edition 1.39.0.29-prusa3d-win64 on 2018-01-22 at 14:53:14
[print:0.05mm DETAIL] [print:0.05mm DETAIL]
avoid_crossing_perimeters = 0 avoid_crossing_perimeters = 0
@ -532,7 +532,7 @@ xy_size_compensation = 0
[print:0.10mm DETAIL MK3] [print:0.10mm DETAIL MK3]
avoid_crossing_perimeters = 0 avoid_crossing_perimeters = 0
bottom_solid_layers = 4 bottom_solid_layers = 7
bridge_acceleration = 1000 bridge_acceleration = 1000
bridge_angle = 0 bridge_angle = 0
bridge_flow_ratio = 0.8 bridge_flow_ratio = 0.8
@ -563,17 +563,17 @@ first_layer_height = 0.2
first_layer_speed = 30 first_layer_speed = 30
gap_fill_speed = 40 gap_fill_speed = 40
gcode_comments = 0 gcode_comments = 0
infill_acceleration = 3500 infill_acceleration = 1500
infill_every_layers = 1 infill_every_layers = 1
infill_extruder = 1 infill_extruder = 1
infill_extrusion_width = 0.45 infill_extrusion_width = 0.45
infill_first = 0 infill_first = 0
infill_only_where_needed = 0 infill_only_where_needed = 0
infill_overlap = 25% infill_overlap = 25%
infill_speed = 200 infill_speed = 170
interface_shells = 0 interface_shells = 0
layer_height = 0.1 layer_height = 0.1
max_print_speed = 250 max_print_speed = 170
max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0 max_volumetric_speed = 0
@ -601,7 +601,7 @@ solid_infill_below_area = 0
solid_infill_every_layers = 0 solid_infill_every_layers = 0
solid_infill_extruder = 1 solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45 solid_infill_extrusion_width = 0.45
solid_infill_speed = 200 solid_infill_speed = 170
spiral_vase = 0 spiral_vase = 0
standby_temperature_delta = -5 standby_temperature_delta = -5
support_material = 0 support_material = 0
@ -627,8 +627,8 @@ thin_walls = 0
threads = 4 threads = 4
top_infill_extrusion_width = 0.4 top_infill_extrusion_width = 0.4
top_solid_infill_speed = 50 top_solid_infill_speed = 50
top_solid_layers = 5 top_solid_layers = 9
travel_speed = 250 travel_speed = 170
wipe_tower = 0 wipe_tower = 0
wipe_tower_per_color_wipe = 15 wipe_tower_per_color_wipe = 15
wipe_tower_width = 60 wipe_tower_width = 60
@ -1062,7 +1062,7 @@ xy_size_compensation = 0
[print:0.15mm OPTIMAL MK3] [print:0.15mm OPTIMAL MK3]
avoid_crossing_perimeters = 0 avoid_crossing_perimeters = 0
bottom_solid_layers = 4 bottom_solid_layers = 5
bridge_acceleration = 1000 bridge_acceleration = 1000
bridge_angle = 0 bridge_angle = 0
bridge_flow_ratio = 0.8 bridge_flow_ratio = 0.8
@ -1093,17 +1093,17 @@ first_layer_height = 0.2
first_layer_speed = 30 first_layer_speed = 30
gap_fill_speed = 40 gap_fill_speed = 40
gcode_comments = 0 gcode_comments = 0
infill_acceleration = 3500 infill_acceleration = 1500
infill_every_layers = 1 infill_every_layers = 1
infill_extruder = 1 infill_extruder = 1
infill_extrusion_width = 0.45 infill_extrusion_width = 0.45
infill_first = 0 infill_first = 0
infill_only_where_needed = 0 infill_only_where_needed = 0
infill_overlap = 25% infill_overlap = 25%
infill_speed = 200 infill_speed = 170
interface_shells = 0 interface_shells = 0
layer_height = 0.15 layer_height = 0.15
max_print_speed = 250 max_print_speed = 170
max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0 max_volumetric_speed = 0
@ -1131,7 +1131,7 @@ solid_infill_below_area = 0
solid_infill_every_layers = 0 solid_infill_every_layers = 0
solid_infill_extruder = 1 solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45 solid_infill_extrusion_width = 0.45
solid_infill_speed = 200 solid_infill_speed = 170
spiral_vase = 0 spiral_vase = 0
standby_temperature_delta = -5 standby_temperature_delta = -5
support_material = 0 support_material = 0
@ -1157,8 +1157,8 @@ thin_walls = 0
threads = 4 threads = 4
top_infill_extrusion_width = 0.4 top_infill_extrusion_width = 0.4
top_solid_infill_speed = 50 top_solid_infill_speed = 50
top_solid_layers = 5 top_solid_layers = 7
travel_speed = 250 travel_speed = 170
wipe_tower = 1 wipe_tower = 1
wipe_tower_per_color_wipe = 15 wipe_tower_per_color_wipe = 15
wipe_tower_width = 60 wipe_tower_width = 60
@ -1517,17 +1517,17 @@ first_layer_height = 0.2
first_layer_speed = 30 first_layer_speed = 30
gap_fill_speed = 40 gap_fill_speed = 40
gcode_comments = 0 gcode_comments = 0
infill_acceleration = 3500 infill_acceleration = 1500
infill_every_layers = 1 infill_every_layers = 1
infill_extruder = 1 infill_extruder = 1
infill_extrusion_width = 0.45 infill_extrusion_width = 0.45
infill_first = 0 infill_first = 0
infill_only_where_needed = 0 infill_only_where_needed = 0
infill_overlap = 25% infill_overlap = 25%
infill_speed = 200 infill_speed = 170
interface_shells = 0 interface_shells = 0
layer_height = 0.2 layer_height = 0.2
max_print_speed = 250 max_print_speed = 170
max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0 max_volumetric_speed = 0
@ -1555,7 +1555,7 @@ solid_infill_below_area = 0
solid_infill_every_layers = 0 solid_infill_every_layers = 0
solid_infill_extruder = 1 solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45 solid_infill_extrusion_width = 0.45
solid_infill_speed = 200 solid_infill_speed = 170
spiral_vase = 0 spiral_vase = 0
standby_temperature_delta = -5 standby_temperature_delta = -5
support_material = 0 support_material = 0
@ -1582,7 +1582,7 @@ threads = 4
top_infill_extrusion_width = 0.4 top_infill_extrusion_width = 0.4
top_solid_infill_speed = 50 top_solid_infill_speed = 50
top_solid_layers = 5 top_solid_layers = 5
travel_speed = 250 travel_speed = 170
wipe_tower = 1 wipe_tower = 1
wipe_tower_per_color_wipe = 15 wipe_tower_per_color_wipe = 15
wipe_tower_width = 60 wipe_tower_width = 60
@ -2807,13 +2807,13 @@ filament_settings_id =
filament_soluble = 0 filament_soluble = 0
filament_type = PET filament_type = PET
first_layer_bed_temperature = 90 first_layer_bed_temperature = 90
first_layer_temperature = 260 first_layer_temperature = 275
max_fan_speed = 80 max_fan_speed = 50
min_fan_speed = 80 min_fan_speed = 50
min_print_speed = 5 min_print_speed = 5
slowdown_below_layer_time = 20 slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
temperature = 260 temperature = 275
[filament:Fillamentum Timberfil] [filament:Fillamentum Timberfil]
bed_temperature = 60 bed_temperature = 60
@ -3120,19 +3120,19 @@ filament_colour = #00CA0A
filament_cost = 0 filament_cost = 0
filament_density = 0 filament_density = 0
filament_diameter = 1.75 filament_diameter = 1.75
filament_max_volumetric_speed = 2.5 filament_max_volumetric_speed = 1.5
filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88" filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
filament_settings_id = filament_settings_id =
filament_soluble = 0 filament_soluble = 0
filament_type = FLEX filament_type = FLEX
first_layer_bed_temperature = 50 first_layer_bed_temperature = 50
first_layer_temperature = 220 first_layer_temperature = 240
max_fan_speed = 90 max_fan_speed = 90
min_fan_speed = 70 min_fan_speed = 70
min_print_speed = 5 min_print_speed = 5
slowdown_below_layer_time = 20 slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 230 temperature = 240
[filament:Taulman Bridge] [filament:Taulman Bridge]
bed_temperature = 50 bed_temperature = 50
@ -3560,7 +3560,7 @@ retract_speed = 35
serial_port = serial_port =
serial_speed = 250000 serial_speed = 250000
single_extruder_multi_material = 0 single_extruder_multi_material = 0
start_gcode = M115 U3.1.1-RC4 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X15 Y15 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S95 start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
toolchange_gcode = toolchange_gcode =
use_firmware_retraction = 0 use_firmware_retraction = 0
use_relative_e_distances = 1 use_relative_e_distances = 1

56
resources/profiles/Original Prusa i3 MK3.ini
View File

@ -1,4 +1,4 @@
# generated by Slic3r Prusa Edition 1.39.0 on 2018-01-06 at 15:12:34 # generated by Slic3r Prusa Edition 1.39.0 on 2018-02-02 at 10:48:46
[print:0.05mm DETAIL] [print:0.05mm DETAIL]
avoid_crossing_perimeters = 0 avoid_crossing_perimeters = 0
@ -532,7 +532,7 @@ xy_size_compensation = 0
[print:0.10mm DETAIL MK3] [print:0.10mm DETAIL MK3]
avoid_crossing_perimeters = 0 avoid_crossing_perimeters = 0
bottom_solid_layers = 4 bottom_solid_layers = 7
bridge_acceleration = 1000 bridge_acceleration = 1000
bridge_angle = 0 bridge_angle = 0
bridge_flow_ratio = 0.8 bridge_flow_ratio = 0.8
@ -563,17 +563,17 @@ first_layer_height = 0.2
first_layer_speed = 30 first_layer_speed = 30
gap_fill_speed = 40 gap_fill_speed = 40
gcode_comments = 0 gcode_comments = 0
infill_acceleration = 3500 infill_acceleration = 1500
infill_every_layers = 1 infill_every_layers = 1
infill_extruder = 1 infill_extruder = 1
infill_extrusion_width = 0.45 infill_extrusion_width = 0.45
infill_first = 0 infill_first = 0
infill_only_where_needed = 0 infill_only_where_needed = 0
infill_overlap = 25% infill_overlap = 25%
infill_speed = 200 infill_speed = 170
interface_shells = 0 interface_shells = 0
layer_height = 0.1 layer_height = 0.1
max_print_speed = 250 max_print_speed = 170
max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0 max_volumetric_speed = 0
@ -601,7 +601,7 @@ solid_infill_below_area = 0
solid_infill_every_layers = 0 solid_infill_every_layers = 0
solid_infill_extruder = 1 solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45 solid_infill_extrusion_width = 0.45
solid_infill_speed = 200 solid_infill_speed = 170
spiral_vase = 0 spiral_vase = 0
standby_temperature_delta = -5 standby_temperature_delta = -5
support_material = 0 support_material = 0
@ -627,8 +627,8 @@ thin_walls = 0
threads = 4 threads = 4
top_infill_extrusion_width = 0.4 top_infill_extrusion_width = 0.4
top_solid_infill_speed = 50 top_solid_infill_speed = 50
top_solid_layers = 5 top_solid_layers = 9
travel_speed = 250 travel_speed = 170
wipe_tower = 0 wipe_tower = 0
wipe_tower_per_color_wipe = 15 wipe_tower_per_color_wipe = 15
wipe_tower_width = 60 wipe_tower_width = 60
@ -1062,7 +1062,7 @@ xy_size_compensation = 0
[print:0.15mm OPTIMAL MK3] [print:0.15mm OPTIMAL MK3]
avoid_crossing_perimeters = 0 avoid_crossing_perimeters = 0
bottom_solid_layers = 4 bottom_solid_layers = 5
bridge_acceleration = 1000 bridge_acceleration = 1000
bridge_angle = 0 bridge_angle = 0
bridge_flow_ratio = 0.8 bridge_flow_ratio = 0.8
@ -1093,17 +1093,17 @@ first_layer_height = 0.2
first_layer_speed = 30 first_layer_speed = 30
gap_fill_speed = 40 gap_fill_speed = 40
gcode_comments = 0 gcode_comments = 0
infill_acceleration = 3500 infill_acceleration = 1500
infill_every_layers = 1 infill_every_layers = 1
infill_extruder = 1 infill_extruder = 1
infill_extrusion_width = 0.45 infill_extrusion_width = 0.45
infill_first = 0 infill_first = 0
infill_only_where_needed = 0 infill_only_where_needed = 0
infill_overlap = 25% infill_overlap = 25%
infill_speed = 200 infill_speed = 170
interface_shells = 0 interface_shells = 0
layer_height = 0.15 layer_height = 0.15
max_print_speed = 250 max_print_speed = 170
max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0 max_volumetric_speed = 0
@ -1131,7 +1131,7 @@ solid_infill_below_area = 0
solid_infill_every_layers = 0 solid_infill_every_layers = 0
solid_infill_extruder = 1 solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45 solid_infill_extrusion_width = 0.45
solid_infill_speed = 200 solid_infill_speed = 170
spiral_vase = 0 spiral_vase = 0
standby_temperature_delta = -5 standby_temperature_delta = -5
support_material = 0 support_material = 0
@ -1157,8 +1157,8 @@ thin_walls = 0
threads = 4 threads = 4
top_infill_extrusion_width = 0.4 top_infill_extrusion_width = 0.4
top_solid_infill_speed = 50 top_solid_infill_speed = 50
top_solid_layers = 5 top_solid_layers = 7
travel_speed = 250 travel_speed = 170
wipe_tower = 1 wipe_tower = 1
wipe_tower_per_color_wipe = 15 wipe_tower_per_color_wipe = 15
wipe_tower_width = 60 wipe_tower_width = 60
@ -1517,17 +1517,17 @@ first_layer_height = 0.2
first_layer_speed = 30 first_layer_speed = 30
gap_fill_speed = 40 gap_fill_speed = 40
gcode_comments = 0 gcode_comments = 0
infill_acceleration = 3500 infill_acceleration = 1500
infill_every_layers = 1 infill_every_layers = 1
infill_extruder = 1 infill_extruder = 1
infill_extrusion_width = 0.45 infill_extrusion_width = 0.45
infill_first = 0 infill_first = 0
infill_only_where_needed = 0 infill_only_where_needed = 0
infill_overlap = 25% infill_overlap = 25%
infill_speed = 200 infill_speed = 170
interface_shells = 0 interface_shells = 0
layer_height = 0.2 layer_height = 0.2
max_print_speed = 250 max_print_speed = 170
max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0 max_volumetric_speed = 0
@ -1555,7 +1555,7 @@ solid_infill_below_area = 0
solid_infill_every_layers = 0 solid_infill_every_layers = 0
solid_infill_extruder = 1 solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45 solid_infill_extrusion_width = 0.45
solid_infill_speed = 200 solid_infill_speed = 170
spiral_vase = 0 spiral_vase = 0
standby_temperature_delta = -5 standby_temperature_delta = -5
support_material = 0 support_material = 0
@ -1582,7 +1582,7 @@ threads = 4
top_infill_extrusion_width = 0.4 top_infill_extrusion_width = 0.4
top_solid_infill_speed = 50 top_solid_infill_speed = 50
top_solid_layers = 5 top_solid_layers = 5
travel_speed = 250 travel_speed = 170
wipe_tower = 1 wipe_tower = 1
wipe_tower_per_color_wipe = 15 wipe_tower_per_color_wipe = 15
wipe_tower_width = 60 wipe_tower_width = 60
@ -2807,13 +2807,13 @@ filament_settings_id =
filament_soluble = 0 filament_soluble = 0
filament_type = PET filament_type = PET
first_layer_bed_temperature = 90 first_layer_bed_temperature = 90
first_layer_temperature = 260 first_layer_temperature = 275
max_fan_speed = 80 max_fan_speed = 50
min_fan_speed = 80 min_fan_speed = 50
min_print_speed = 5 min_print_speed = 5
slowdown_below_layer_time = 20 slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
temperature = 260 temperature = 275
[filament:Fillamentum Timberfil] [filament:Fillamentum Timberfil]
bed_temperature = 60 bed_temperature = 60
@ -3120,19 +3120,19 @@ filament_colour = #00CA0A
filament_cost = 0 filament_cost = 0
filament_density = 0 filament_density = 0
filament_diameter = 1.75 filament_diameter = 1.75
filament_max_volumetric_speed = 2.5 filament_max_volumetric_speed = 1.5
filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88" filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
filament_settings_id = filament_settings_id =
filament_soluble = 0 filament_soluble = 0
filament_type = FLEX filament_type = FLEX
first_layer_bed_temperature = 50 first_layer_bed_temperature = 50
first_layer_temperature = 220 first_layer_temperature = 240
max_fan_speed = 90 max_fan_speed = 90
min_fan_speed = 70 min_fan_speed = 70
min_print_speed = 5 min_print_speed = 5
slowdown_below_layer_time = 20 slowdown_below_layer_time = 20
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 230 temperature = 240
[filament:Taulman Bridge] [filament:Taulman Bridge]
bed_temperature = 50 bed_temperature = 50
@ -3280,7 +3280,7 @@ retract_speed = 35
serial_port = serial_port =
serial_speed = 250000 serial_speed = 250000
single_extruder_multi_material = 0 single_extruder_multi_material = 0
start_gcode = M115 U3.1.1-RC4 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X500 Y500 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X15 Y15 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S95 start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
toolchange_gcode = toolchange_gcode =
use_firmware_retraction = 0 use_firmware_retraction = 0
use_relative_e_distances = 1 use_relative_e_distances = 1