Split PrintConfig into PrintObjectConfig and PrintRegionConfig
This commit is contained in:
Alessandro Ranellucci
parent
83326845dd
commit
51b976721d
@ -2,6 +2,6 @@
|
||||
|
||||
namespace Slic3r {
|
||||
|
||||
t_optiondef_map PrintConfig::PrintConfigDef = PrintConfig::build_def();
|
||||
t_optiondef_map PrintConfigDef::def = PrintConfigDef::build_def();
|
||||
|
||||
}
|
||||
|
||||
@ -37,417 +37,10 @@ template<> inline t_config_enum_values ConfigOptionEnum<InfillPattern>::get_enum
|
||||
return keys_map;
|
||||
}
|
||||
|
||||
class PrintConfig : public StaticConfig
|
||||
class PrintConfigDef
|
||||
{
|
||||
public:
|
||||
static t_optiondef_map PrintConfigDef;
|
||||
|
||||
ConfigOptionBool avoid_crossing_perimeters;
|
||||
ConfigOptionPoint bed_size;
|
||||
ConfigOptionInt bed_temperature;
|
||||
ConfigOptionInt bottom_solid_layers;
|
||||
ConfigOptionFloat bridge_acceleration;
|
||||
ConfigOptionInt bridge_fan_speed;
|
||||
ConfigOptionFloat bridge_flow_ratio;
|
||||
ConfigOptionFloat bridge_speed;
|
||||
ConfigOptionFloat brim_width;
|
||||
ConfigOptionBool complete_objects;
|
||||
ConfigOptionBool cooling;
|
||||
ConfigOptionFloat default_acceleration;
|
||||
ConfigOptionInt disable_fan_first_layers;
|
||||
ConfigOptionInt duplicate;
|
||||
ConfigOptionFloat duplicate_distance;
|
||||
ConfigOptionPoint duplicate_grid;
|
||||
ConfigOptionString end_gcode;
|
||||
ConfigOptionFloatOrPercent external_perimeter_speed;
|
||||
ConfigOptionBool external_perimeters_first;
|
||||
ConfigOptionBool extra_perimeters;
|
||||
ConfigOptionFloat extruder_clearance_height;
|
||||
ConfigOptionFloat extruder_clearance_radius;
|
||||
ConfigOptionPoints extruder_offset;
|
||||
ConfigOptionString extrusion_axis;
|
||||
ConfigOptionFloats extrusion_multiplier;
|
||||
ConfigOptionFloatOrPercent extrusion_width;
|
||||
ConfigOptionBool fan_always_on;
|
||||
ConfigOptionInt fan_below_layer_time;
|
||||
ConfigOptionFloats filament_diameter;
|
||||
ConfigOptionInt fill_angle;
|
||||
ConfigOptionFloat fill_density;
|
||||
ConfigOptionEnum<InfillPattern> fill_pattern;
|
||||
ConfigOptionFloat first_layer_acceleration;
|
||||
ConfigOptionInt first_layer_bed_temperature;
|
||||
ConfigOptionFloatOrPercent first_layer_extrusion_width;
|
||||
ConfigOptionFloatOrPercent first_layer_height;
|
||||
ConfigOptionFloatOrPercent first_layer_speed;
|
||||
ConfigOptionInts first_layer_temperature;
|
||||
ConfigOptionBool g0;
|
||||
ConfigOptionFloat gap_fill_speed;
|
||||
ConfigOptionBool gcode_arcs;
|
||||
ConfigOptionBool gcode_comments;
|
||||
ConfigOptionEnum<GCodeFlavor> gcode_flavor;
|
||||
ConfigOptionFloat infill_acceleration;
|
||||
ConfigOptionInt infill_every_layers;
|
||||
ConfigOptionInt infill_extruder;
|
||||
ConfigOptionFloatOrPercent infill_extrusion_width;
|
||||
ConfigOptionBool infill_first;
|
||||
ConfigOptionBool infill_only_where_needed;
|
||||
ConfigOptionFloat infill_speed;
|
||||
ConfigOptionString layer_gcode;
|
||||
ConfigOptionFloat layer_height;
|
||||
ConfigOptionInt max_fan_speed;
|
||||
ConfigOptionInt min_fan_speed;
|
||||
ConfigOptionInt min_print_speed;
|
||||
ConfigOptionFloat min_skirt_length;
|
||||
ConfigOptionString notes;
|
||||
ConfigOptionFloats nozzle_diameter;
|
||||
ConfigOptionBool only_retract_when_crossing_perimeters;
|
||||
ConfigOptionBool ooze_prevention;
|
||||
ConfigOptionString output_filename_format;
|
||||
ConfigOptionBool overhangs;
|
||||
ConfigOptionFloat perimeter_acceleration;
|
||||
ConfigOptionInt perimeter_extruder;
|
||||
ConfigOptionFloatOrPercent perimeter_extrusion_width;
|
||||
ConfigOptionFloat perimeter_speed;
|
||||
ConfigOptionInt perimeters;
|
||||
ConfigOptionStrings post_process;
|
||||
ConfigOptionPoint print_center;
|
||||
ConfigOptionInt raft_layers;
|
||||
ConfigOptionBool randomize_start;
|
||||
ConfigOptionFloat resolution;
|
||||
ConfigOptionFloats retract_before_travel;
|
||||
ConfigOptionBools retract_layer_change;
|
||||
ConfigOptionFloats retract_length;
|
||||
ConfigOptionFloats retract_length_toolchange;
|
||||
ConfigOptionFloats retract_lift;
|
||||
ConfigOptionFloats retract_restart_extra;
|
||||
ConfigOptionFloats retract_restart_extra_toolchange;
|
||||
ConfigOptionInts retract_speed;
|
||||
ConfigOptionInt rotate;
|
||||
ConfigOptionFloat scale;
|
||||
ConfigOptionFloat skirt_distance;
|
||||
ConfigOptionInt skirt_height;
|
||||
ConfigOptionInt skirts;
|
||||
ConfigOptionInt slowdown_below_layer_time;
|
||||
ConfigOptionFloatOrPercent small_perimeter_speed;
|
||||
ConfigOptionEnum<InfillPattern> solid_fill_pattern;
|
||||
ConfigOptionFloat solid_infill_below_area;
|
||||
ConfigOptionInt solid_infill_every_layers;
|
||||
ConfigOptionFloatOrPercent solid_infill_extrusion_width;
|
||||
ConfigOptionFloatOrPercent solid_infill_speed;
|
||||
ConfigOptionInt solid_layers;
|
||||
ConfigOptionBool spiral_vase;
|
||||
ConfigOptionInt standby_temperature_delta;
|
||||
ConfigOptionString start_gcode;
|
||||
ConfigOptionBool start_perimeters_at_concave_points;
|
||||
ConfigOptionBool start_perimeters_at_non_overhang;
|
||||
ConfigOptionBool support_material;
|
||||
ConfigOptionInt support_material_angle;
|
||||
ConfigOptionInt support_material_enforce_layers;
|
||||
ConfigOptionInt support_material_extruder;
|
||||
ConfigOptionFloatOrPercent support_material_extrusion_width;
|
||||
ConfigOptionInt support_material_interface_extruder;
|
||||
ConfigOptionInt support_material_interface_layers;
|
||||
ConfigOptionFloat support_material_interface_spacing;
|
||||
ConfigOptionEnum<InfillPattern> support_material_pattern;
|
||||
ConfigOptionFloat support_material_spacing;
|
||||
ConfigOptionFloat support_material_speed;
|
||||
ConfigOptionInt support_material_threshold;
|
||||
ConfigOptionInts temperature;
|
||||
ConfigOptionBool thin_walls;
|
||||
ConfigOptionInt threads;
|
||||
ConfigOptionString toolchange_gcode;
|
||||
ConfigOptionFloatOrPercent top_infill_extrusion_width;
|
||||
ConfigOptionFloatOrPercent top_solid_infill_speed;
|
||||
ConfigOptionInt top_solid_layers;
|
||||
ConfigOptionFloat travel_speed;
|
||||
ConfigOptionBool use_firmware_retraction;
|
||||
ConfigOptionBool use_relative_e_distances;
|
||||
ConfigOptionFloat vibration_limit;
|
||||
ConfigOptionBools wipe;
|
||||
ConfigOptionFloat z_offset;
|
||||
|
||||
PrintConfig() {
|
||||
this->def = &PrintConfig::PrintConfigDef;
|
||||
|
||||
this->avoid_crossing_perimeters.value = false;
|
||||
this->bed_size.point = Pointf(200,200);
|
||||
this->bed_temperature.value = 0;
|
||||
this->bottom_solid_layers.value = 3;
|
||||
this->bridge_acceleration.value = 0;
|
||||
this->bridge_fan_speed.value = 100;
|
||||
this->bridge_flow_ratio.value = 1;
|
||||
this->bridge_speed.value = 60;
|
||||
this->brim_width.value = 0;
|
||||
this->complete_objects.value = false;
|
||||
this->cooling.value = true;
|
||||
this->default_acceleration.value = 0;
|
||||
this->disable_fan_first_layers.value = 1;
|
||||
this->duplicate.value = 1;
|
||||
this->duplicate_distance.value = 6;
|
||||
this->duplicate_grid.point = Pointf(1,1);
|
||||
this->end_gcode.value = "M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n";
|
||||
this->external_perimeter_speed.value = 70;
|
||||
this->external_perimeter_speed.percent = true;
|
||||
this->external_perimeters_first.value = false;
|
||||
this->extra_perimeters.value = true;
|
||||
this->extruder_clearance_height.value = 20;
|
||||
this->extruder_clearance_radius.value = 20;
|
||||
this->extruder_offset.points.resize(1);
|
||||
this->extruder_offset.points[0] = Pointf(0,0);
|
||||
this->extrusion_axis.value = "E";
|
||||
this->extrusion_multiplier.values.resize(1);
|
||||
this->extrusion_multiplier.values[0] = 1;
|
||||
this->extrusion_width.value = 0;
|
||||
this->extrusion_width.percent = false;
|
||||
this->fan_always_on.value = false;
|
||||
this->fan_below_layer_time.value = 60;
|
||||
this->filament_diameter.values.resize(1);
|
||||
this->filament_diameter.values[0] = 3;
|
||||
this->fill_angle.value = 45;
|
||||
this->fill_density.value = 0.4;
|
||||
this->fill_pattern.value = ipHoneycomb;
|
||||
this->first_layer_acceleration.value = 0;
|
||||
this->first_layer_bed_temperature.value = 0;
|
||||
this->first_layer_extrusion_width.value = 200;
|
||||
this->first_layer_extrusion_width.percent = true;
|
||||
this->first_layer_height.value = 0.35;
|
||||
this->first_layer_height.percent = false;
|
||||
this->first_layer_speed.value = 30;
|
||||
this->first_layer_speed.percent = true;
|
||||
this->first_layer_temperature.values.resize(1);
|
||||
this->first_layer_temperature.values[0] = 200;
|
||||
this->g0.value = false;
|
||||
this->gap_fill_speed.value = 20;
|
||||
this->gcode_arcs.value = false;
|
||||
this->gcode_comments.value = false;
|
||||
this->gcode_flavor.value = gcfRepRap;
|
||||
this->infill_acceleration.value = 0;
|
||||
this->infill_every_layers.value = 1;
|
||||
this->infill_extruder.value = 1;
|
||||
this->infill_extrusion_width.value = 0;
|
||||
this->infill_extrusion_width.percent = false;
|
||||
this->infill_first.value = false;
|
||||
this->infill_only_where_needed.value = false;
|
||||
this->infill_speed.value = 60;
|
||||
this->layer_gcode.value = "";
|
||||
this->layer_height.value = 0.4;
|
||||
this->max_fan_speed.value = 100;
|
||||
this->min_fan_speed.value = 35;
|
||||
this->min_print_speed.value = 10;
|
||||
this->min_skirt_length.value = 0;
|
||||
this->notes.value = "";
|
||||
this->nozzle_diameter.values.resize(1);
|
||||
this->nozzle_diameter.values[0] = 0.5;
|
||||
this->only_retract_when_crossing_perimeters.value = true;
|
||||
this->ooze_prevention.value = false;
|
||||
this->output_filename_format.value = "[input_filename_base].gcode";
|
||||
this->overhangs.value = true;
|
||||
this->perimeter_acceleration.value = 0;
|
||||
this->perimeter_extruder.value = 1;
|
||||
this->perimeter_extrusion_width.value = 0;
|
||||
this->perimeter_extrusion_width.percent = false;
|
||||
this->perimeter_speed.value = 30;
|
||||
this->perimeters.value = 3;
|
||||
this->print_center.point = Pointf(100,100);
|
||||
this->raft_layers.value = 0;
|
||||
this->randomize_start.value = false;
|
||||
this->resolution.value = 0;
|
||||
this->retract_before_travel.values.resize(1);
|
||||
this->retract_before_travel.values[0] = 2;
|
||||
this->retract_layer_change.values.resize(1);
|
||||
this->retract_layer_change.values[0] = true;
|
||||
this->retract_length.values.resize(1);
|
||||
this->retract_length.values[0] = 1;
|
||||
this->retract_length_toolchange.values.resize(1);
|
||||
this->retract_length_toolchange.values[0] = 10;
|
||||
this->retract_lift.values.resize(1);
|
||||
this->retract_lift.values[0] = 0;
|
||||
this->retract_restart_extra.values.resize(1);
|
||||
this->retract_restart_extra.values[0] = 0;
|
||||
this->retract_restart_extra_toolchange.values.resize(1);
|
||||
this->retract_restart_extra_toolchange.values[0] = 0;
|
||||
this->retract_speed.values.resize(1);
|
||||
this->retract_speed.values[0] = 30;
|
||||
this->rotate.value = 0;
|
||||
this->scale.value = 1;
|
||||
this->skirt_distance.value = 6;
|
||||
this->skirt_height.value = 1;
|
||||
this->skirts.value = 1;
|
||||
this->slowdown_below_layer_time.value = 30;
|
||||
this->small_perimeter_speed.value = 30;
|
||||
this->small_perimeter_speed.percent = false;
|
||||
this->solid_fill_pattern.value = ipRectilinear;
|
||||
this->solid_infill_below_area.value = 70;
|
||||
this->solid_infill_every_layers.value = 0;
|
||||
this->solid_infill_extrusion_width.value = 0;
|
||||
this->solid_infill_extrusion_width.percent = false;
|
||||
this->solid_infill_speed.value = 60;
|
||||
this->solid_infill_speed.percent = false;
|
||||
this->spiral_vase.value = false;
|
||||
this->standby_temperature_delta.value = -5;
|
||||
this->start_gcode.value = "G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n";
|
||||
this->start_perimeters_at_concave_points.value = false;
|
||||
this->start_perimeters_at_non_overhang.value = false;
|
||||
this->support_material.value = false;
|
||||
this->support_material_angle.value = 0;
|
||||
this->support_material_enforce_layers.value = 0;
|
||||
this->support_material_extruder.value = 1;
|
||||
this->support_material_extrusion_width.value = 0;
|
||||
this->support_material_extrusion_width.percent = false;
|
||||
this->support_material_interface_extruder.value = 1;
|
||||
this->support_material_interface_layers.value = 3;
|
||||
this->support_material_interface_spacing.value = 0;
|
||||
this->support_material_pattern.value = ipHoneycomb;
|
||||
this->support_material_spacing.value = 2.5;
|
||||
this->support_material_speed.value = 60;
|
||||
this->support_material_threshold.value = 0;
|
||||
this->temperature.values.resize(1);
|
||||
this->temperature.values[0] = 200;
|
||||
this->thin_walls.value = true;
|
||||
this->threads.value = 2;
|
||||
this->toolchange_gcode.value = "";
|
||||
this->top_infill_extrusion_width.value = 0;
|
||||
this->top_infill_extrusion_width.percent = false;
|
||||
this->top_solid_infill_speed.value = 50;
|
||||
this->top_solid_infill_speed.percent = false;
|
||||
this->top_solid_layers.value = 3;
|
||||
this->travel_speed.value = 130;
|
||||
this->use_firmware_retraction.value = false;
|
||||
this->use_relative_e_distances.value = false;
|
||||
this->vibration_limit.value = 0;
|
||||
this->wipe.values.resize(1);
|
||||
this->wipe.values[0] = false;
|
||||
this->z_offset.value = 0;
|
||||
};
|
||||
|
||||
ConfigOption* option(const t_config_option_key opt_key, bool create = false) {
|
||||
if (opt_key == "avoid_crossing_perimeters") return &this->avoid_crossing_perimeters;
|
||||
if (opt_key == "bed_size") return &this->bed_size;
|
||||
if (opt_key == "bed_temperature") return &this->bed_temperature;
|
||||
if (opt_key == "bottom_solid_layers") return &this->bottom_solid_layers;
|
||||
if (opt_key == "bridge_acceleration") return &this->bridge_acceleration;
|
||||
if (opt_key == "bridge_fan_speed") return &this->bridge_fan_speed;
|
||||
if (opt_key == "bridge_flow_ratio") return &this->bridge_flow_ratio;
|
||||
if (opt_key == "bridge_speed") return &this->bridge_speed;
|
||||
if (opt_key == "brim_width") return &this->brim_width;
|
||||
if (opt_key == "complete_objects") return &this->complete_objects;
|
||||
if (opt_key == "cooling") return &this->cooling;
|
||||
if (opt_key == "default_acceleration") return &this->default_acceleration;
|
||||
if (opt_key == "disable_fan_first_layers") return &this->disable_fan_first_layers;
|
||||
if (opt_key == "duplicate") return &this->duplicate;
|
||||
if (opt_key == "duplicate_distance") return &this->duplicate_distance;
|
||||
if (opt_key == "duplicate_grid") return &this->duplicate_grid;
|
||||
if (opt_key == "end_gcode") return &this->end_gcode;
|
||||
if (opt_key == "external_perimeter_speed") return &this->external_perimeter_speed;
|
||||
if (opt_key == "external_perimeters_first") return &this->external_perimeters_first;
|
||||
if (opt_key == "extra_perimeters") return &this->extra_perimeters;
|
||||
if (opt_key == "extruder_clearance_height") return &this->extruder_clearance_height;
|
||||
if (opt_key == "extruder_clearance_radius") return &this->extruder_clearance_radius;
|
||||
if (opt_key == "extruder_offset") return &this->extruder_offset;
|
||||
if (opt_key == "extrusion_axis") return &this->extrusion_axis;
|
||||
if (opt_key == "extrusion_multiplier") return &this->extrusion_multiplier;
|
||||
if (opt_key == "extrusion_width") return &this->extrusion_width;
|
||||
if (opt_key == "fan_always_on") return &this->fan_always_on;
|
||||
if (opt_key == "fan_below_layer_time") return &this->fan_below_layer_time;
|
||||
if (opt_key == "filament_diameter") return &this->filament_diameter;
|
||||
if (opt_key == "fill_angle") return &this->fill_angle;
|
||||
if (opt_key == "fill_density") return &this->fill_density;
|
||||
if (opt_key == "fill_pattern") return &this->fill_pattern;
|
||||
if (opt_key == "first_layer_acceleration") return &this->first_layer_acceleration;
|
||||
if (opt_key == "first_layer_bed_temperature") return &this->first_layer_bed_temperature;
|
||||
if (opt_key == "first_layer_extrusion_width") return &this->first_layer_extrusion_width;
|
||||
if (opt_key == "first_layer_height") return &this->first_layer_height;
|
||||
if (opt_key == "first_layer_speed") return &this->first_layer_speed;
|
||||
if (opt_key == "first_layer_temperature") return &this->first_layer_temperature;
|
||||
if (opt_key == "g0") return &this->g0;
|
||||
if (opt_key == "gap_fill_speed") return &this->gap_fill_speed;
|
||||
if (opt_key == "gcode_arcs") return &this->gcode_arcs;
|
||||
if (opt_key == "gcode_comments") return &this->gcode_comments;
|
||||
if (opt_key == "gcode_flavor") return &this->gcode_flavor;
|
||||
if (opt_key == "infill_acceleration") return &this->infill_acceleration;
|
||||
if (opt_key == "infill_every_layers") return &this->infill_every_layers;
|
||||
if (opt_key == "infill_extruder") return &this->infill_extruder;
|
||||
if (opt_key == "infill_extrusion_width") return &this->infill_extrusion_width;
|
||||
if (opt_key == "infill_first") return &this->infill_first;
|
||||
if (opt_key == "infill_only_where_needed") return &this->infill_only_where_needed;
|
||||
if (opt_key == "infill_speed") return &this->infill_speed;
|
||||
if (opt_key == "layer_gcode") return &this->layer_gcode;
|
||||
if (opt_key == "layer_height") return &this->layer_height;
|
||||
if (opt_key == "max_fan_speed") return &this->max_fan_speed;
|
||||
if (opt_key == "min_fan_speed") return &this->min_fan_speed;
|
||||
if (opt_key == "min_print_speed") return &this->min_print_speed;
|
||||
if (opt_key == "min_skirt_length") return &this->min_skirt_length;
|
||||
if (opt_key == "notes") return &this->notes;
|
||||
if (opt_key == "nozzle_diameter") return &this->nozzle_diameter;
|
||||
if (opt_key == "only_retract_when_crossing_perimeters") return &this->only_retract_when_crossing_perimeters;
|
||||
if (opt_key == "ooze_prevention") return &this->ooze_prevention;
|
||||
if (opt_key == "output_filename_format") return &this->output_filename_format;
|
||||
if (opt_key == "overhangs") return &this->overhangs;
|
||||
if (opt_key == "perimeter_acceleration") return &this->perimeter_acceleration;
|
||||
if (opt_key == "perimeter_extruder") return &this->perimeter_extruder;
|
||||
if (opt_key == "perimeter_extrusion_width") return &this->perimeter_extrusion_width;
|
||||
if (opt_key == "perimeter_speed") return &this->perimeter_speed;
|
||||
if (opt_key == "perimeters") return &this->perimeters;
|
||||
if (opt_key == "post_process") return &this->post_process;
|
||||
if (opt_key == "print_center") return &this->print_center;
|
||||
if (opt_key == "raft_layers") return &this->raft_layers;
|
||||
if (opt_key == "randomize_start") return &this->randomize_start;
|
||||
if (opt_key == "resolution") return &this->resolution;
|
||||
if (opt_key == "retract_before_travel") return &this->retract_before_travel;
|
||||
if (opt_key == "retract_layer_change") return &this->retract_layer_change;
|
||||
if (opt_key == "retract_length") return &this->retract_length;
|
||||
if (opt_key == "retract_length_toolchange") return &this->retract_length_toolchange;
|
||||
if (opt_key == "retract_lift") return &this->retract_lift;
|
||||
if (opt_key == "retract_restart_extra") return &this->retract_restart_extra;
|
||||
if (opt_key == "retract_restart_extra_toolchange") return &this->retract_restart_extra_toolchange;
|
||||
if (opt_key == "retract_speed") return &this->retract_speed;
|
||||
if (opt_key == "rotate") return &this->rotate;
|
||||
if (opt_key == "scale") return &this->scale;
|
||||
if (opt_key == "skirt_distance") return &this->skirt_distance;
|
||||
if (opt_key == "skirt_height") return &this->skirt_height;
|
||||
if (opt_key == "skirts") return &this->skirts;
|
||||
if (opt_key == "slowdown_below_layer_time") return &this->slowdown_below_layer_time;
|
||||
if (opt_key == "small_perimeter_speed") return &this->small_perimeter_speed;
|
||||
if (opt_key == "solid_fill_pattern") return &this->solid_fill_pattern;
|
||||
if (opt_key == "solid_infill_below_area") return &this->solid_infill_below_area;
|
||||
if (opt_key == "solid_infill_every_layers") return &this->solid_infill_every_layers;
|
||||
if (opt_key == "solid_infill_extrusion_width") return &this->solid_infill_extrusion_width;
|
||||
if (opt_key == "solid_infill_speed") return &this->solid_infill_speed;
|
||||
if (opt_key == "solid_layers") return &this->solid_layers;
|
||||
if (opt_key == "spiral_vase") return &this->spiral_vase;
|
||||
if (opt_key == "standby_temperature_delta") return &this->standby_temperature_delta;
|
||||
if (opt_key == "start_gcode") return &this->start_gcode;
|
||||
if (opt_key == "start_perimeters_at_concave_points") return &this->start_perimeters_at_concave_points;
|
||||
if (opt_key == "start_perimeters_at_non_overhang") return &this->start_perimeters_at_non_overhang;
|
||||
if (opt_key == "support_material") return &this->support_material;
|
||||
if (opt_key == "support_material_angle") return &this->support_material_angle;
|
||||
if (opt_key == "support_material_enforce_layers") return &this->support_material_enforce_layers;
|
||||
if (opt_key == "support_material_extruder") return &this->support_material_extruder;
|
||||
if (opt_key == "support_material_extrusion_width") return &this->support_material_extrusion_width;
|
||||
if (opt_key == "support_material_interface_extruder") return &this->support_material_interface_extruder;
|
||||
if (opt_key == "support_material_interface_layers") return &this->support_material_interface_layers;
|
||||
if (opt_key == "support_material_interface_spacing") return &this->support_material_interface_spacing;
|
||||
if (opt_key == "support_material_pattern") return &this->support_material_pattern;
|
||||
if (opt_key == "support_material_spacing") return &this->support_material_spacing;
|
||||
if (opt_key == "support_material_speed") return &this->support_material_speed;
|
||||
if (opt_key == "support_material_threshold") return &this->support_material_threshold;
|
||||
if (opt_key == "temperature") return &this->temperature;
|
||||
if (opt_key == "thin_walls") return &this->thin_walls;
|
||||
if (opt_key == "threads") return &this->threads;
|
||||
if (opt_key == "toolchange_gcode") return &this->toolchange_gcode;
|
||||
if (opt_key == "top_infill_extrusion_width") return &this->top_infill_extrusion_width;
|
||||
if (opt_key == "top_solid_infill_speed") return &this->top_solid_infill_speed;
|
||||
if (opt_key == "top_solid_layers") return &this->top_solid_layers;
|
||||
if (opt_key == "travel_speed") return &this->travel_speed;
|
||||
if (opt_key == "use_firmware_retraction") return &this->use_firmware_retraction;
|
||||
if (opt_key == "use_relative_e_distances") return &this->use_relative_e_distances;
|
||||
if (opt_key == "vibration_limit") return &this->vibration_limit;
|
||||
if (opt_key == "wipe") return &this->wipe;
|
||||
if (opt_key == "z_offset") return &this->z_offset;
|
||||
|
||||
if (create) throw "Attempt to create non-existing option in StaticConfig object";
|
||||
return NULL;
|
||||
};
|
||||
static t_optiondef_map def;
|
||||
|
||||
static t_optiondef_map build_def () {
|
||||
t_optiondef_map Options;
|
||||
@ -1301,14 +894,458 @@ class PrintConfig : public StaticConfig
|
||||
};
|
||||
};
|
||||
|
||||
class PrintObjectConfig : public virtual StaticConfig
|
||||
{
|
||||
public:
|
||||
ConfigOptionFloatOrPercent extrusion_width;
|
||||
ConfigOptionFloatOrPercent first_layer_height;
|
||||
ConfigOptionFloat layer_height;
|
||||
ConfigOptionInt raft_layers;
|
||||
ConfigOptionBool support_material;
|
||||
ConfigOptionInt support_material_angle;
|
||||
ConfigOptionInt support_material_enforce_layers;
|
||||
ConfigOptionInt support_material_extruder;
|
||||
ConfigOptionFloatOrPercent support_material_extrusion_width;
|
||||
ConfigOptionInt support_material_interface_extruder;
|
||||
ConfigOptionInt support_material_interface_layers;
|
||||
ConfigOptionFloat support_material_interface_spacing;
|
||||
ConfigOptionEnum<InfillPattern> support_material_pattern;
|
||||
ConfigOptionFloat support_material_spacing;
|
||||
ConfigOptionFloat support_material_speed;
|
||||
ConfigOptionInt support_material_threshold;
|
||||
|
||||
PrintObjectConfig() {
|
||||
this->def = &PrintConfigDef::def;
|
||||
|
||||
this->extrusion_width.value = 0;
|
||||
this->extrusion_width.percent = false;
|
||||
this->first_layer_height.value = 0.35;
|
||||
this->first_layer_height.percent = false;
|
||||
this->layer_height.value = 0.4;
|
||||
this->raft_layers.value = 0;
|
||||
this->support_material.value = false;
|
||||
this->support_material_angle.value = 0;
|
||||
this->support_material_enforce_layers.value = 0;
|
||||
this->support_material_extruder.value = 1;
|
||||
this->support_material_extrusion_width.value = 0;
|
||||
this->support_material_extrusion_width.percent = false;
|
||||
this->support_material_interface_extruder.value = 1;
|
||||
this->support_material_interface_layers.value = 3;
|
||||
this->support_material_interface_spacing.value = 0;
|
||||
this->support_material_pattern.value = ipHoneycomb;
|
||||
this->support_material_spacing.value = 2.5;
|
||||
this->support_material_speed.value = 60;
|
||||
this->support_material_threshold.value = 0;
|
||||
};
|
||||
|
||||
ConfigOption* option(const t_config_option_key opt_key, bool create = false) {
|
||||
if (opt_key == "extrusion_width") return &this->extrusion_width;
|
||||
if (opt_key == "first_layer_height") return &this->first_layer_height;
|
||||
if (opt_key == "layer_height") return &this->layer_height;
|
||||
if (opt_key == "raft_layers") return &this->raft_layers;
|
||||
if (opt_key == "support_material") return &this->support_material;
|
||||
if (opt_key == "support_material_angle") return &this->support_material_angle;
|
||||
if (opt_key == "support_material_enforce_layers") return &this->support_material_enforce_layers;
|
||||
if (opt_key == "support_material_extruder") return &this->support_material_extruder;
|
||||
if (opt_key == "support_material_extrusion_width") return &this->support_material_extrusion_width;
|
||||
if (opt_key == "support_material_interface_extruder") return &this->support_material_interface_extruder;
|
||||
if (opt_key == "support_material_interface_layers") return &this->support_material_interface_layers;
|
||||
if (opt_key == "support_material_interface_spacing") return &this->support_material_interface_spacing;
|
||||
if (opt_key == "support_material_pattern") return &this->support_material_pattern;
|
||||
if (opt_key == "support_material_spacing") return &this->support_material_spacing;
|
||||
if (opt_key == "support_material_speed") return &this->support_material_speed;
|
||||
if (opt_key == "support_material_threshold") return &this->support_material_threshold;
|
||||
|
||||
if (create) throw "Attempt to create non-existing option in StaticConfig object";
|
||||
return NULL;
|
||||
};
|
||||
};
|
||||
|
||||
class PrintRegionConfig : public virtual StaticConfig
|
||||
{
|
||||
public:
|
||||
ConfigOptionInt bottom_solid_layers;
|
||||
ConfigOptionBool extra_perimeters;
|
||||
ConfigOptionInt fill_angle;
|
||||
ConfigOptionFloat fill_density;
|
||||
ConfigOptionEnum<InfillPattern> fill_pattern;
|
||||
ConfigOptionFloatOrPercent first_layer_extrusion_width;
|
||||
ConfigOptionInt infill_extruder;
|
||||
ConfigOptionFloatOrPercent infill_extrusion_width;
|
||||
ConfigOptionInt infill_every_layers;
|
||||
ConfigOptionBool infill_only_where_needed;
|
||||
ConfigOptionInt perimeter_extruder;
|
||||
ConfigOptionFloatOrPercent perimeter_extrusion_width;
|
||||
ConfigOptionInt perimeters;
|
||||
ConfigOptionEnum<InfillPattern> solid_fill_pattern;
|
||||
ConfigOptionFloat solid_infill_below_area;
|
||||
ConfigOptionFloatOrPercent solid_infill_extrusion_width;
|
||||
ConfigOptionInt solid_infill_every_layers;
|
||||
ConfigOptionInt solid_layers;
|
||||
ConfigOptionBool thin_walls;
|
||||
ConfigOptionFloatOrPercent top_infill_extrusion_width;
|
||||
ConfigOptionInt top_solid_layers;
|
||||
|
||||
PrintObjectConfig() {
|
||||
this->def = &PrintConfigDef::def;
|
||||
|
||||
this->bottom_solid_layers.value = 3;
|
||||
this->extra_perimeters.value = true;
|
||||
this->fill_angle.value = 45;
|
||||
this->fill_density.value = 0.4;
|
||||
this->fill_pattern.value = ipHoneycomb;
|
||||
this->first_layer_extrusion_width.value = 200;
|
||||
this->first_layer_extrusion_width.percent = true;
|
||||
this->infill_extruder.value = 1;
|
||||
this->infill_extrusion_width.value = 0;
|
||||
this->infill_extrusion_width.percent = false;
|
||||
this->infill_every_layers.value = 1;
|
||||
this->infill_only_where_needed.value = false;
|
||||
this->perimeter_extruder.value = 1;
|
||||
this->perimeter_extrusion_width.value = 0;
|
||||
this->perimeter_extrusion_width.percent = false;
|
||||
this->perimeters.value = 3;
|
||||
this->solid_fill_pattern.value = ipRectilinear;
|
||||
this->solid_infill_below_area.value = 70;
|
||||
this->solid_infill_extrusion_width.value = 0;
|
||||
this->solid_infill_extrusion_width.percent = false;
|
||||
this->solid_infill_every_layers.value = 0;
|
||||
this->thin_walls.value = true;
|
||||
this->top_infill_extrusion_width.value = 0;
|
||||
this->top_infill_extrusion_width.percent = false;
|
||||
this->top_solid_layers.value = 3;
|
||||
};
|
||||
|
||||
ConfigOption* option(const t_config_option_key opt_key, bool create = false) {
|
||||
if (opt_key == "bottom_solid_layers") return &this->bottom_solid_layers;
|
||||
if (opt_key == "extra_perimeters") return &this->extra_perimeters;
|
||||
if (opt_key == "fill_angle") return &this->fill_angle;
|
||||
if (opt_key == "fill_density") return &this->fill_density;
|
||||
if (opt_key == "fill_pattern") return &this->fill_pattern;
|
||||
if (opt_key == "first_layer_extrusion_width") return &this->first_layer_extrusion_width;
|
||||
if (opt_key == "infill_extruder") return &this->infill_extruder;
|
||||
if (opt_key == "infill_extrusion_width") return &this->infill_extrusion_width;
|
||||
if (opt_key == "infill_every_layers") return &this->infill_every_layers;
|
||||
if (opt_key == "infill_only_where_needed") return &this->infill_only_where_needed;
|
||||
if (opt_key == "perimeter_extruder") return &this->perimeter_extruder;
|
||||
if (opt_key == "perimeter_extrusion_width") return &this->perimeter_extrusion_width;
|
||||
if (opt_key == "perimeters") return &this->perimeters;
|
||||
if (opt_key == "solid_fill_pattern") return &this->solid_fill_pattern;
|
||||
if (opt_key == "solid_infill_below_area") return &this->solid_infill_below_area;
|
||||
if (opt_key == "solid_infill_extrusion_width") return &this->solid_infill_extrusion_width;
|
||||
if (opt_key == "solid_infill_every_layers") return &this->solid_infill_every_layers;
|
||||
if (opt_key == "solid_layers") return &this->solid_layers;
|
||||
if (opt_key == "thin_walls") return &this->thin_walls;
|
||||
if (opt_key == "top_infill_extrusion_width") return &this->top_infill_extrusion_width;
|
||||
if (opt_key == "top_solid_layers") return &this->top_solid_layers;
|
||||
|
||||
if (create) throw "Attempt to create non-existing option in StaticConfig object";
|
||||
return NULL;
|
||||
};
|
||||
};
|
||||
|
||||
class PrintConfig : public virtual StaticConfig
|
||||
{
|
||||
public:
|
||||
ConfigOptionBool avoid_crossing_perimeters;
|
||||
ConfigOptionPoint bed_size;
|
||||
ConfigOptionInt bed_temperature;
|
||||
ConfigOptionFloat bridge_acceleration;
|
||||
ConfigOptionInt bridge_fan_speed;
|
||||
ConfigOptionFloat bridge_flow_ratio;
|
||||
ConfigOptionFloat bridge_speed;
|
||||
ConfigOptionFloat brim_width;
|
||||
ConfigOptionBool complete_objects;
|
||||
ConfigOptionBool cooling;
|
||||
ConfigOptionFloat default_acceleration;
|
||||
ConfigOptionInt disable_fan_first_layers;
|
||||
ConfigOptionInt duplicate;
|
||||
ConfigOptionFloat duplicate_distance;
|
||||
ConfigOptionPoint duplicate_grid;
|
||||
ConfigOptionString end_gcode;
|
||||
ConfigOptionFloatOrPercent external_perimeter_speed;
|
||||
ConfigOptionBool external_perimeters_first;
|
||||
ConfigOptionFloat extruder_clearance_height;
|
||||
ConfigOptionFloat extruder_clearance_radius;
|
||||
ConfigOptionPoints extruder_offset;
|
||||
ConfigOptionString extrusion_axis;
|
||||
ConfigOptionFloats extrusion_multiplier;
|
||||
ConfigOptionBool fan_always_on;
|
||||
ConfigOptionInt fan_below_layer_time;
|
||||
ConfigOptionFloats filament_diameter;
|
||||
ConfigOptionFloat first_layer_acceleration;
|
||||
ConfigOptionInt first_layer_bed_temperature;
|
||||
ConfigOptionFloatOrPercent first_layer_speed;
|
||||
ConfigOptionInts first_layer_temperature;
|
||||
ConfigOptionBool g0;
|
||||
ConfigOptionFloat gap_fill_speed;
|
||||
ConfigOptionBool gcode_arcs;
|
||||
ConfigOptionBool gcode_comments;
|
||||
ConfigOptionEnum<GCodeFlavor> gcode_flavor;
|
||||
ConfigOptionFloat infill_acceleration;
|
||||
ConfigOptionBool infill_first;
|
||||
ConfigOptionFloat infill_speed;
|
||||
ConfigOptionString layer_gcode;
|
||||
ConfigOptionInt max_fan_speed;
|
||||
ConfigOptionInt min_fan_speed;
|
||||
ConfigOptionInt min_print_speed;
|
||||
ConfigOptionFloat min_skirt_length;
|
||||
ConfigOptionString notes;
|
||||
ConfigOptionFloats nozzle_diameter;
|
||||
ConfigOptionBool only_retract_when_crossing_perimeters;
|
||||
ConfigOptionBool ooze_prevention;
|
||||
ConfigOptionString output_filename_format;
|
||||
ConfigOptionBool overhangs;
|
||||
ConfigOptionFloat perimeter_acceleration;
|
||||
ConfigOptionFloat perimeter_speed;
|
||||
ConfigOptionStrings post_process;
|
||||
ConfigOptionPoint print_center;
|
||||
ConfigOptionBool randomize_start;
|
||||
ConfigOptionFloat resolution;
|
||||
ConfigOptionFloats retract_before_travel;
|
||||
ConfigOptionBools retract_layer_change;
|
||||
ConfigOptionFloats retract_length;
|
||||
ConfigOptionFloats retract_length_toolchange;
|
||||
ConfigOptionFloats retract_lift;
|
||||
ConfigOptionFloats retract_restart_extra;
|
||||
ConfigOptionFloats retract_restart_extra_toolchange;
|
||||
ConfigOptionInts retract_speed;
|
||||
ConfigOptionInt rotate;
|
||||
ConfigOptionFloat scale;
|
||||
ConfigOptionFloat skirt_distance;
|
||||
ConfigOptionInt skirt_height;
|
||||
ConfigOptionInt skirts;
|
||||
ConfigOptionInt slowdown_below_layer_time;
|
||||
ConfigOptionFloatOrPercent small_perimeter_speed;
|
||||
ConfigOptionFloatOrPercent solid_infill_speed;
|
||||
ConfigOptionBool spiral_vase;
|
||||
ConfigOptionInt standby_temperature_delta;
|
||||
ConfigOptionString start_gcode;
|
||||
ConfigOptionBool start_perimeters_at_concave_points;
|
||||
ConfigOptionBool start_perimeters_at_non_overhang;
|
||||
ConfigOptionInts temperature;
|
||||
ConfigOptionInt threads;
|
||||
ConfigOptionString toolchange_gcode;
|
||||
ConfigOptionFloatOrPercent top_solid_infill_speed;
|
||||
ConfigOptionFloat travel_speed;
|
||||
ConfigOptionBool use_firmware_retraction;
|
||||
ConfigOptionBool use_relative_e_distances;
|
||||
ConfigOptionFloat vibration_limit;
|
||||
ConfigOptionBools wipe;
|
||||
ConfigOptionFloat z_offset;
|
||||
|
||||
PrintConfig() {
|
||||
this->def = &PrintConfig::PrintConfigDef;
|
||||
|
||||
this->avoid_crossing_perimeters.value = false;
|
||||
this->bed_size.point = Pointf(200,200);
|
||||
this->bed_temperature.value = 0;
|
||||
this->bridge_acceleration.value = 0;
|
||||
this->bridge_fan_speed.value = 100;
|
||||
this->bridge_flow_ratio.value = 1;
|
||||
this->bridge_speed.value = 60;
|
||||
this->brim_width.value = 0;
|
||||
this->complete_objects.value = false;
|
||||
this->cooling.value = true;
|
||||
this->default_acceleration.value = 0;
|
||||
this->disable_fan_first_layers.value = 1;
|
||||
this->duplicate.value = 1;
|
||||
this->duplicate_distance.value = 6;
|
||||
this->duplicate_grid.point = Pointf(1,1);
|
||||
this->end_gcode.value = "M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors\n";
|
||||
this->external_perimeter_speed.value = 70;
|
||||
this->external_perimeter_speed.percent = true;
|
||||
this->external_perimeters_first.value = false;
|
||||
this->extruder_clearance_height.value = 20;
|
||||
this->extruder_clearance_radius.value = 20;
|
||||
this->extruder_offset.points.resize(1);
|
||||
this->extruder_offset.points[0] = Pointf(0,0);
|
||||
this->extrusion_axis.value = "E";
|
||||
this->extrusion_multiplier.values.resize(1);
|
||||
this->extrusion_multiplier.values[0] = 1;
|
||||
this->fan_always_on.value = false;
|
||||
this->fan_below_layer_time.value = 60;
|
||||
this->filament_diameter.values.resize(1);
|
||||
this->filament_diameter.values[0] = 3;
|
||||
this->first_layer_acceleration.value = 0;
|
||||
this->first_layer_bed_temperature.value = 0;
|
||||
this->first_layer_speed.value = 30;
|
||||
this->first_layer_speed.percent = true;
|
||||
this->first_layer_temperature.values.resize(1);
|
||||
this->first_layer_temperature.values[0] = 200;
|
||||
this->g0.value = false;
|
||||
this->gap_fill_speed.value = 20;
|
||||
this->gcode_arcs.value = false;
|
||||
this->gcode_comments.value = false;
|
||||
this->gcode_flavor.value = gcfRepRap;
|
||||
this->infill_acceleration.value = 0;
|
||||
this->infill_first.value = false;
|
||||
this->infill_speed.value = 60;
|
||||
this->layer_gcode.value = "";
|
||||
this->max_fan_speed.value = 100;
|
||||
this->min_fan_speed.value = 35;
|
||||
this->min_print_speed.value = 10;
|
||||
this->min_skirt_length.value = 0;
|
||||
this->notes.value = "";
|
||||
this->nozzle_diameter.values.resize(1);
|
||||
this->nozzle_diameter.values[0] = 0.5;
|
||||
this->only_retract_when_crossing_perimeters.value = true;
|
||||
this->ooze_prevention.value = false;
|
||||
this->output_filename_format.value = "[input_filename_base].gcode";
|
||||
this->overhangs.value = true;
|
||||
this->perimeter_acceleration.value = 0;
|
||||
this->perimeter_speed.value = 30;
|
||||
this->print_center.point = Pointf(100,100);
|
||||
this->randomize_start.value = false;
|
||||
this->resolution.value = 0;
|
||||
this->retract_before_travel.values.resize(1);
|
||||
this->retract_before_travel.values[0] = 2;
|
||||
this->retract_layer_change.values.resize(1);
|
||||
this->retract_layer_change.values[0] = true;
|
||||
this->retract_length.values.resize(1);
|
||||
this->retract_length.values[0] = 1;
|
||||
this->retract_length_toolchange.values.resize(1);
|
||||
this->retract_length_toolchange.values[0] = 10;
|
||||
this->retract_lift.values.resize(1);
|
||||
this->retract_lift.values[0] = 0;
|
||||
this->retract_restart_extra.values.resize(1);
|
||||
this->retract_restart_extra.values[0] = 0;
|
||||
this->retract_restart_extra_toolchange.values.resize(1);
|
||||
this->retract_restart_extra_toolchange.values[0] = 0;
|
||||
this->retract_speed.values.resize(1);
|
||||
this->retract_speed.values[0] = 30;
|
||||
this->rotate.value = 0;
|
||||
this->scale.value = 1;
|
||||
this->skirt_distance.value = 6;
|
||||
this->skirt_height.value = 1;
|
||||
this->skirts.value = 1;
|
||||
this->slowdown_below_layer_time.value = 30;
|
||||
this->small_perimeter_speed.value = 30;
|
||||
this->small_perimeter_speed.percent = false;
|
||||
this->solid_infill_speed.value = 60;
|
||||
this->solid_infill_speed.percent = false;
|
||||
this->spiral_vase.value = false;
|
||||
this->standby_temperature_delta.value = -5;
|
||||
this->start_gcode.value = "G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n";
|
||||
this->start_perimeters_at_concave_points.value = false;
|
||||
this->start_perimeters_at_non_overhang.value = false;
|
||||
this->temperature.values.resize(1);
|
||||
this->temperature.values[0] = 200;
|
||||
this->threads.value = 2;
|
||||
this->toolchange_gcode.value = "";
|
||||
this->top_solid_infill_speed.value = 50;
|
||||
this->top_solid_infill_speed.percent = false;
|
||||
this->travel_speed.value = 130;
|
||||
this->use_firmware_retraction.value = false;
|
||||
this->use_relative_e_distances.value = false;
|
||||
this->vibration_limit.value = 0;
|
||||
this->wipe.values.resize(1);
|
||||
this->wipe.values[0] = false;
|
||||
this->z_offset.value = 0;
|
||||
};
|
||||
|
||||
ConfigOption* option(const t_config_option_key opt_key, bool create = false) {
|
||||
if (opt_key == "avoid_crossing_perimeters") return &this->avoid_crossing_perimeters;
|
||||
if (opt_key == "bed_size") return &this->bed_size;
|
||||
if (opt_key == "bed_temperature") return &this->bed_temperature;
|
||||
if (opt_key == "bridge_acceleration") return &this->bridge_acceleration;
|
||||
if (opt_key == "bridge_fan_speed") return &this->bridge_fan_speed;
|
||||
if (opt_key == "bridge_flow_ratio") return &this->bridge_flow_ratio;
|
||||
if (opt_key == "bridge_speed") return &this->bridge_speed;
|
||||
if (opt_key == "brim_width") return &this->brim_width;
|
||||
if (opt_key == "complete_objects") return &this->complete_objects;
|
||||
if (opt_key == "cooling") return &this->cooling;
|
||||
if (opt_key == "default_acceleration") return &this->default_acceleration;
|
||||
if (opt_key == "disable_fan_first_layers") return &this->disable_fan_first_layers;
|
||||
if (opt_key == "duplicate") return &this->duplicate;
|
||||
if (opt_key == "duplicate_distance") return &this->duplicate_distance;
|
||||
if (opt_key == "duplicate_grid") return &this->duplicate_grid;
|
||||
if (opt_key == "end_gcode") return &this->end_gcode;
|
||||
if (opt_key == "external_perimeter_speed") return &this->external_perimeter_speed;
|
||||
if (opt_key == "external_perimeters_first") return &this->external_perimeters_first;
|
||||
if (opt_key == "extruder_clearance_height") return &this->extruder_clearance_height;
|
||||
if (opt_key == "extruder_clearance_radius") return &this->extruder_clearance_radius;
|
||||
if (opt_key == "extruder_offset") return &this->extruder_offset;
|
||||
if (opt_key == "extrusion_axis") return &this->extrusion_axis;
|
||||
if (opt_key == "extrusion_multiplier") return &this->extrusion_multiplier;
|
||||
if (opt_key == "fan_always_on") return &this->fan_always_on;
|
||||
if (opt_key == "fan_below_layer_time") return &this->fan_below_layer_time;
|
||||
if (opt_key == "filament_diameter") return &this->filament_diameter;
|
||||
if (opt_key == "first_layer_acceleration") return &this->first_layer_acceleration;
|
||||
if (opt_key == "first_layer_bed_temperature") return &this->first_layer_bed_temperature;
|
||||
if (opt_key == "first_layer_speed") return &this->first_layer_speed;
|
||||
if (opt_key == "first_layer_temperature") return &this->first_layer_temperature;
|
||||
if (opt_key == "g0") return &this->g0;
|
||||
if (opt_key == "gap_fill_speed") return &this->gap_fill_speed;
|
||||
if (opt_key == "gcode_arcs") return &this->gcode_arcs;
|
||||
if (opt_key == "gcode_comments") return &this->gcode_comments;
|
||||
if (opt_key == "gcode_flavor") return &this->gcode_flavor;
|
||||
if (opt_key == "infill_acceleration") return &this->infill_acceleration;
|
||||
if (opt_key == "infill_first") return &this->infill_first;
|
||||
if (opt_key == "infill_speed") return &this->infill_speed;
|
||||
if (opt_key == "layer_gcode") return &this->layer_gcode;
|
||||
if (opt_key == "max_fan_speed") return &this->max_fan_speed;
|
||||
if (opt_key == "min_fan_speed") return &this->min_fan_speed;
|
||||
if (opt_key == "min_print_speed") return &this->min_print_speed;
|
||||
if (opt_key == "min_skirt_length") return &this->min_skirt_length;
|
||||
if (opt_key == "notes") return &this->notes;
|
||||
if (opt_key == "nozzle_diameter") return &this->nozzle_diameter;
|
||||
if (opt_key == "only_retract_when_crossing_perimeters") return &this->only_retract_when_crossing_perimeters;
|
||||
if (opt_key == "ooze_prevention") return &this->ooze_prevention;
|
||||
if (opt_key == "output_filename_format") return &this->output_filename_format;
|
||||
if (opt_key == "overhangs") return &this->overhangs;
|
||||
if (opt_key == "perimeter_acceleration") return &this->perimeter_acceleration;
|
||||
if (opt_key == "perimeter_speed") return &this->perimeter_speed;
|
||||
if (opt_key == "post_process") return &this->post_process;
|
||||
if (opt_key == "print_center") return &this->print_center;
|
||||
if (opt_key == "randomize_start") return &this->randomize_start;
|
||||
if (opt_key == "resolution") return &this->resolution;
|
||||
if (opt_key == "retract_before_travel") return &this->retract_before_travel;
|
||||
if (opt_key == "retract_layer_change") return &this->retract_layer_change;
|
||||
if (opt_key == "retract_length") return &this->retract_length;
|
||||
if (opt_key == "retract_length_toolchange") return &this->retract_length_toolchange;
|
||||
if (opt_key == "retract_lift") return &this->retract_lift;
|
||||
if (opt_key == "retract_restart_extra") return &this->retract_restart_extra;
|
||||
if (opt_key == "retract_restart_extra_toolchange") return &this->retract_restart_extra_toolchange;
|
||||
if (opt_key == "retract_speed") return &this->retract_speed;
|
||||
if (opt_key == "rotate") return &this->rotate;
|
||||
if (opt_key == "scale") return &this->scale;
|
||||
if (opt_key == "skirt_distance") return &this->skirt_distance;
|
||||
if (opt_key == "skirt_height") return &this->skirt_height;
|
||||
if (opt_key == "skirts") return &this->skirts;
|
||||
if (opt_key == "slowdown_below_layer_time") return &this->slowdown_below_layer_time;
|
||||
if (opt_key == "small_perimeter_speed") return &this->small_perimeter_speed;
|
||||
if (opt_key == "solid_infill_speed") return &this->solid_infill_speed;
|
||||
if (opt_key == "spiral_vase") return &this->spiral_vase;
|
||||
if (opt_key == "standby_temperature_delta") return &this->standby_temperature_delta;
|
||||
if (opt_key == "start_gcode") return &this->start_gcode;
|
||||
if (opt_key == "start_perimeters_at_concave_points") return &this->start_perimeters_at_concave_points;
|
||||
if (opt_key == "start_perimeters_at_non_overhang") return &this->start_perimeters_at_non_overhang;
|
||||
if (opt_key == "temperature") return &this->temperature;
|
||||
if (opt_key == "threads") return &this->threads;
|
||||
if (opt_key == "toolchange_gcode") return &this->toolchange_gcode;
|
||||
if (opt_key == "top_solid_infill_speed") return &this->top_solid_infill_speed;
|
||||
if (opt_key == "travel_speed") return &this->travel_speed;
|
||||
if (opt_key == "use_firmware_retraction") return &this->use_firmware_retraction;
|
||||
if (opt_key == "use_relative_e_distances") return &this->use_relative_e_distances;
|
||||
if (opt_key == "vibration_limit") return &this->vibration_limit;
|
||||
if (opt_key == "wipe") return &this->wipe;
|
||||
if (opt_key == "z_offset") return &this->z_offset;
|
||||
|
||||
if (create) throw "Attempt to create non-existing option in StaticConfig object";
|
||||
return NULL;
|
||||
};
|
||||
};
|
||||
|
||||
class DynamicPrintConfig : public DynamicConfig
|
||||
{
|
||||
public:
|
||||
DynamicPrintConfig() {
|
||||
this->def = &PrintConfig::PrintConfigDef;
|
||||
this->def = &PrintConfigDef::def;
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
class FullPrintConfig : public PrintObjectConfig, public PrintRegionConfig, public PrintConfig {};
|
||||
|
||||
}
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user