Added 0.15mm print profile.

resources/profiles/TriLAB.idx

@@ -1,2 +1,3 @@
 min_slic3r_version = 2.3.0-alpha0
+0.0.2 Added 0.15mm print profile
 0.0.1 Initial TriLAB bundle

resources/profiles/TriLAB.ini

@@ -4,13 +4,13 @@
 
 [vendor]
 # Vendor name will be shown by the Config Wizard.
-name = TRILAB
+name = TriLAB
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.0.1
+config_version = 0.0.2
 # Where to get the updates from?
-config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/
-# changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/TriLAB/
+# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
 
 # The printer models will be shown by the Configuration Wizard in this order,
 # also the first model installed & the first nozzle installed will be activated after install.
@@ -43,10 +43,15 @@ default_materials = DeltiQ PLA; DeltiQ ASA; DeltiQ PET; DeltiQ ABS; DeltiQ CPE
 
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
+[print:DeltiQ 0.15mm]
+inherits = DeltiQ 0.2mm
+layer_height = 0.15
+bottom_solid_layers = 5
+top_solid_layers = 6
 
 [print:DeltiQ 0.2mm]
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
+bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -143,7 +148,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 30
-top_solid_layers = 4
+top_solid_layers = 5
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
@@ -254,7 +259,6 @@ extra_loading_move = -2
 extruder_colour = ""
 extruder_offset = 0x0
 gcode_flavor = repetier
-host_type = octoprint
 layer_gcode = ;AFTER_LAYER_CHANGE\nM117 layer [layer_num] at [layer_z]mm\n;[layer_z]\n
 machine_max_acceleration_e = 10000,5000
 machine_max_acceleration_extruding = 1500,1250
@@ -277,14 +281,11 @@ max_print_height = 320
 min_layer_height = 0.15
 nozzle_diameter = 0.4
 parking_pos_retraction = 92
-print_host = 
 printer_model = 
 printer_notes = TRILAB
 printer_settings_id = 
 printer_variant = 
 printer_vendor = 
-printhost_apikey = 
-printhost_cafile = 
 remaining_times = 0
 retract_before_travel = 2
 retract_before_wipe = 100%
@@ -297,8 +298,6 @@ retract_lift_below = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 33
-serial_port = 
-serial_speed = 250000
 silent_mode = 1
 single_extruder_multi_material = 0
 start_gcode = ;START\nM220 S100 ; Set feedmultiply back to 100percent\nG90 ; Absolute positioning\nM83 ; Relative extruder\nM107 ; Layer fan OFF\nM190 S[first_layer_bed_temperature] ; Set bed temperature and wait\nM104 S[first_layer_temperature] ; Set extruder temperature\nG28 ; Home all axes\nG33 ; auto leveling rutine\nG1 X-62 Y-108 Z0.3 F6000 ; Go to purge position start\nG92 E0 ; Zero extruder\nM109 S[first_layer_temperature] ; Set and wait - hotend temperature\nG3 X62 Y-108 I62 J108 E10 F200 ; Go ARC to purge end\nG92 E0 ; Zero extruder