3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Changed PrusaResearch.ini.

Browse Source 
*(Uncommented "printer_model","printer_vendor", "printer_variant", "default_filament_profile")
* Added msg "It's system preset" to Dependencies
This commit is contained in:
YuSanka 2018-03-23 09:41:04 +01:00
parent 1c5970d0a2
commit 53e100b890
2 changed files with 23 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
resources/profiles/PrusaResearch.ini
View File

@ -909,10 +909,10 @@ use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
#printer_model = MK2S
#printer_variant = 0.4
#default_print_profile = 0.15mm OPTIMAL
#default_filament_profile = Prusa PLA
printer_model = MK2S
printer_variant = 0.4
default_print_profile = 0.15mm OPTIMAL
default_filament_profile = Prusa PLA
[printer:*multimaterial*]
inherits = *common*
@ -928,7 +928,7 @@ retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 80
single_extruder_multi_material = 1
#printer_model = MK2SMM
printer_model = MK2SMM
[printer:*mm-single*]
inherits = *multimaterial*
@ -956,15 +956,15 @@ nozzle_diameter = 0.25
retract_length = 1
retract_speed = 50
variable_layer_height = 0
#printer_variant = 0.25
#default_print_profile = 0.10mm DETAIL 0.25 nozzle
printer_variant = 0.25
default_print_profile = 0.10mm DETAIL 0.25 nozzle
[printer:Original Prusa i3 MK2 0.6 nozzle]
inherits = *common*
max_layer_height = 0.35
min_layer_height = 0.1
nozzle_diameter = 0.6
#printer_variant = 0.6
printer_variant = 0.6
[printer:Original Prusa i3 MK2 MM Single Mode]
inherits = *mm-single*
@ -972,7 +972,7 @@ inherits = *mm-single*
[printer:Original Prusa i3 MK2 MM Single Mode 0.6 nozzle]
inherits = *mm-single*
nozzle_diameter = 0.6
#printer_variant = 0.6
printer_variant = 0.6
[printer:Original Prusa i3 MK2 MultiMaterial]
inherits = *mm-multi*
@ -981,7 +981,7 @@ nozzle_diameter = 0.4,0.4,0.4,0.4
[printer:Original Prusa i3 MK2 MultiMaterial 0.6 nozzle]
inherits = *mm-multi*
nozzle_diameter = 0.6,0.6,0.6,0.6
#printer_variant = 0.6
printer_variant = 0.6
[printer:Original Prusa i3 MK3]
inherits = *common*
@ -989,8 +989,8 @@ end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
retract_lift_below = 209
start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
#printer_model = MK3
#default_print_profile = 0.15mm OPTIMAL MK3
printer_model = MK3
default_print_profile = 0.15mm OPTIMAL MK3
[printer:Original Prusa i3 MK3 0.25 nozzle]
inherits = *common*
@ -999,8 +999,8 @@ end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
retract_lift_below = 209
start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
#printer_model = MK3
#default_print_profile = 0.10mm DETAIL MK3
printer_model = MK3
default_print_profile = 0.10mm DETAIL MK3
[printer:Original Prusa i3 MK3 0.6 nozzle]
inherits = *common*
@ -1009,8 +1009,8 @@ end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
retract_lift_below = 209
start_gcode = M115 U3.1.1-RC5 ; tell printer latest fw version\nM201 X1000 Y1000 Z200 E5000 ; sets maximum accelerations, mm/sec^2\nM203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec\nM204 S1250 T1250 ; sets acceleration (S) and retract acceleration (T)\nM205 X10 Y10 Z0.4 E2.5 ; sets the jerk limits, mm/sec\nM205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0\nM221 S{if layer_height==0.05}100{else}95{endif}
#printer_model = MK3
#default_print_profile = 0.15mm OPTIMAL MK3
printer_model = MK3
default_print_profile = 0.15mm OPTIMAL MK3
[presets]
print = 0.15mm OPTIMAL MK3

12
xs/src/slic3r/GUI/Tab.cpp
View File

@ -617,6 +617,13 @@ void Tab::on_presets_changed()
event.SetString(m_name);
g_wxMainFrame->ProcessWindowEvent(event);
}
const Preset* parent = m_presets->get_selected_preset_parent();
const wxString description_line = parent == nullptr ?
_(L("It's default preset")) : parent == &m_presets->get_selected_preset() ?
_(L("It's system preset")) :
_(L("Current preset is inherited from")) + ":\n" + parent->name;
m_parent_preset_description_line->SetText(description_line);
}
void Tab::update_frequently_changed_parameters()
@ -1727,11 +1734,6 @@ void Tab::load_current_preset()
"bullet_white.png" :
wxMSW ? "sys_unlock.png" : "lock_open.png";
wxString description_line = parent == nullptr ?
_(L("It's default preset")) :
_(L("Current preset is inherited from")) + ":\n" + parent->name;
m_parent_preset_description_line->SetText(description_line);
// use CallAfter because some field triggers schedule on_change calls using CallAfter,
// and we don't want them to be called after this update_dirty() as they would mark the
// preset dirty again