Bumped up the version to 2.1.0-alpha0.
Updated the bundled profiles to integrate retract overrides for PET and FLEX materials.
This commit is contained in:
bubnikv
parent
5f89414501
commit
576643c7ed
@ -1,3 +1,5 @@
|
||||
min_slic3r_version = 2.1.0-alpha0
|
||||
1.0.0-alpha0 Filament specific retract for PET and similar copolymers, and for FLEX
|
||||
min_slic3r_version = 1.42.0-alpha6
|
||||
0.8.3 FW version and SL1 materials update
|
||||
0.8.2 FFF and SL1 settings update
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
name = Prusa Research
|
||||
# Configuration version of this file. Config file will only be installed, if the config_version differs.
|
||||
# This means, the server may force the PrusaSlicer configuration to be downgraded.
|
||||
config_version = 0.8.3
|
||||
config_version = 1.0.0-alpha0
|
||||
# Where to get the updates from?
|
||||
config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
|
||||
changelog_url = http://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
|
||||
@ -811,7 +811,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
|
||||
# MK2 MMU #
|
||||
[print:0.35mm FAST sol full 0.6 nozzle]
|
||||
inherits = *0.35mm*; *0.6nozzle*; *soluble_support*
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_model=="MK2SMM" and nozzle_diameter[0]==0.6 and num_extruders>1
|
||||
external_perimeter_extrusion_width = 0.6
|
||||
external_perimeter_speed = 30
|
||||
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
|
||||
@ -876,8 +876,8 @@ solid_infill_speed = 70
|
||||
top_solid_infill_speed = 45
|
||||
external_perimeter_extrusion_width = 0.7
|
||||
perimeter_extrusion_width = 0.7
|
||||
infill_extrusion_width = 0.72
|
||||
solid_infill_extrusion_width = 0.72
|
||||
infill_extrusion_width = 0.7
|
||||
solid_infill_extrusion_width = 0.7
|
||||
|
||||
# XXXXXXXXXXXXXXXXXXXXXX
|
||||
# XXX----- MK2.5 ----XXX
|
||||
@ -1009,12 +1009,22 @@ max_fan_speed = 50
|
||||
min_fan_speed = 30
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}24{else}45{endif} ; Filament gcode"
|
||||
temperature = 240
|
||||
filament_retract_length = 1.4
|
||||
filament_retract_lift = 0.2
|
||||
compatible_printers_condition = printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||
|
||||
[filament:*PET06*]
|
||||
inherits = *PET*
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||
filament_max_volumetric_speed = 15
|
||||
|
||||
[filament:*PETMMU1*]
|
||||
inherits = *PET*
|
||||
filament_retract_length = nil
|
||||
filament_retract_speed = nil
|
||||
filament_retract_lift = 0.2
|
||||
compatible_printers_condition = printer_model=="MK2SMM"
|
||||
|
||||
[filament:*ABS*]
|
||||
inherits = *common*
|
||||
bed_temperature = 110
|
||||
@ -1039,7 +1049,7 @@ inherits = *common*
|
||||
bed_temperature = 50
|
||||
bridge_fan_speed = 100
|
||||
# For now, all but selected filaments are disabled for the MMU 2.0
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
cooling = 0
|
||||
disable_fan_first_layers = 1
|
||||
extrusion_multiplier = 1.2
|
||||
@ -1052,8 +1062,10 @@ first_layer_bed_temperature = 50
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 90
|
||||
min_fan_speed = 70
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
|
||||
start_filament_gcode = "M900 K0"; Filament gcode"
|
||||
temperature = 240
|
||||
filament_retract_length = 0.4
|
||||
filament_retract_lift = 0
|
||||
|
||||
[filament:ColorFabb Brass Bronze]
|
||||
inherits = *PLA*
|
||||
@ -1124,7 +1136,7 @@ temperature = 270
|
||||
|
||||
[filament:ColorFabb XT-CF20]
|
||||
inherits = *PET*
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||
extrusion_multiplier = 1.2
|
||||
filament_cost = 80.65
|
||||
filament_density = 1.35
|
||||
@ -1134,6 +1146,8 @@ first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 260
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
||||
temperature = 260
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = 0.2
|
||||
|
||||
[filament:ColorFabb nGen]
|
||||
inherits = *PET*
|
||||
@ -1163,13 +1177,15 @@ first_layer_temperature = 260
|
||||
max_fan_speed = 35
|
||||
min_fan_speed = 20
|
||||
temperature = 260
|
||||
filament_retract_length = nil
|
||||
filament_retract_lift = 0
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 && ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and single_extruder_multi_material)
|
||||
|
||||
[filament:E3D Edge]
|
||||
inherits = *PET*
|
||||
filament_cost = 56.9
|
||||
filament_density = 1.26
|
||||
filament_type = EDGE
|
||||
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
|
||||
|
||||
[filament:E3D PC-ABS]
|
||||
inherits = *ABS*
|
||||
@ -1195,11 +1211,10 @@ first_layer_temperature = 265
|
||||
temperature = 265
|
||||
filament_type = ASA
|
||||
|
||||
[filament:Fillamentum CPE HG100 HM100]
|
||||
[filament:Fillamentum CPE]
|
||||
inherits = *PET*
|
||||
filament_cost = 54.1
|
||||
filament_density = 1.25
|
||||
filament_notes = "CPE HG100 , CPE HM100"
|
||||
filament_type = CPE
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 275
|
||||
@ -1238,6 +1253,15 @@ filament_cost = 25.4
|
||||
filament_density = 1.24
|
||||
filament_notes = "List of materials tested with standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
|
||||
|
||||
[filament:Generic FLEX]
|
||||
inherits = *FLEX*
|
||||
filament_cost = 82
|
||||
filament_density = 1.22
|
||||
filament_max_volumetric_speed = 1.2
|
||||
filament_retract_length = 0
|
||||
filament_retract_speed = nil
|
||||
filament_retract_lift = nil
|
||||
|
||||
[filament:Polymaker PC-Max]
|
||||
inherits = *ABS*
|
||||
filament_cost = 77.3
|
||||
@ -1313,7 +1337,7 @@ inherits = *PET*
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.27
|
||||
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG"
|
||||
compatible_printers_condition = nozzle_diameter[0]!=0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||
|
||||
[filament:Prusament PETG]
|
||||
inherits = *PET*
|
||||
@ -1322,7 +1346,7 @@ temperature = 250
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.27
|
||||
filament_type = PETG
|
||||
compatible_printers_condition = nozzle_diameter[0]!=0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_model!="MK2SMM" and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
|
||||
|
||||
[filament:Prusa PET 0.6 nozzle]
|
||||
inherits = *PET06*
|
||||
@ -1340,7 +1364,7 @@ filament_type = PETG
|
||||
|
||||
[filament:*PET MMU2*]
|
||||
inherits = Prusa PET
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
||||
compatible_printers_condition = nozzle_diameter[0]!=0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
||||
temperature = 230
|
||||
first_layer_temperature = 230
|
||||
filament_cooling_final_speed = 1
|
||||
@ -1354,6 +1378,13 @@ filament_unload_time = 12
|
||||
filament_unloading_speed = 20
|
||||
filament_unloading_speed_start = 120
|
||||
filament_loading_speed_start = 19
|
||||
filament_retract_length = 1.4
|
||||
filament_retract_lift = 0.2
|
||||
|
||||
[filament:*PET MMU2 06*]
|
||||
inherits = *PET MMU2*
|
||||
compatible_printers_condition = nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material
|
||||
filament_max_volumetric_speed = 13
|
||||
|
||||
[filament:Generic PET MMU2]
|
||||
inherits = *PET MMU2*
|
||||
@ -1365,6 +1396,16 @@ inherits = *PET MMU2*
|
||||
inherits = *PET MMU2*
|
||||
filament_type = PETG
|
||||
|
||||
[filament:Generic PET MMU2 0.6 nozzle]
|
||||
inherits = *PET MMU2 06*
|
||||
|
||||
[filament:Prusa PET MMU2 0.6 nozzle]
|
||||
inherits = *PET MMU2 06*
|
||||
|
||||
[filament:Prusament PETG MMU2 0.6 nozzle]
|
||||
inherits = *PET MMU2 06*
|
||||
filament_type = PETG
|
||||
|
||||
[filament:Prusa PLA]
|
||||
inherits = *PLA*
|
||||
filament_cost = 25.4
|
||||
@ -1407,6 +1448,7 @@ inherits = *PLA MMU2*
|
||||
inherits = *FLEX*
|
||||
filament_cost = 82
|
||||
filament_density = 1.22
|
||||
filament_max_volumetric_speed = 1.35
|
||||
|
||||
[filament:Taulman Bridge]
|
||||
inherits = *common*
|
||||
@ -1544,6 +1586,130 @@ min_fan_speed = 100
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
|
||||
temperature = 220
|
||||
|
||||
## Filaments MMU1
|
||||
|
||||
[filament:ColorFabb HT MMU1]
|
||||
inherits = *PETMMU1*
|
||||
bed_temperature = 110
|
||||
bridge_fan_speed = 30
|
||||
cooling = 1
|
||||
disable_fan_first_layers = 3
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 10
|
||||
filament_cost = 58.66
|
||||
filament_density = 1.18
|
||||
first_layer_bed_temperature = 105
|
||||
first_layer_temperature = 270
|
||||
max_fan_speed = 20
|
||||
min_fan_speed = 10
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
|
||||
temperature = 270
|
||||
|
||||
[filament:ColorFabb XT MMU1]
|
||||
inherits = *PETMMU1*
|
||||
filament_type = PET
|
||||
filament_cost = 62.9
|
||||
filament_density = 1.27
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 260
|
||||
temperature = 270
|
||||
|
||||
[filament:ColorFabb XT-CF20 MMU1]
|
||||
inherits = *PETMMU1*
|
||||
compatible_printers_condition = nozzle_diameter[0]>0.35 and printer_model=="MK2SMM"
|
||||
extrusion_multiplier = 1.2
|
||||
filament_cost = 80.65
|
||||
filament_density = 1.35
|
||||
filament_colour = #804040
|
||||
filament_max_volumetric_speed = 1
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 260
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
||||
temperature = 260
|
||||
|
||||
[filament:ColorFabb nGen MMU1]
|
||||
inherits = *PETMMU1*
|
||||
filament_cost = 21.2
|
||||
filament_density = 1.2
|
||||
bridge_fan_speed = 40
|
||||
fan_always_on = 0
|
||||
fan_below_layer_time = 10
|
||||
filament_type = NGEN
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 35
|
||||
min_fan_speed = 20
|
||||
|
||||
[filament:E3D Edge MMU1]
|
||||
inherits = *PETMMU1*
|
||||
filament_cost = 56.9
|
||||
filament_density = 1.26
|
||||
filament_type = EDGE
|
||||
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
|
||||
|
||||
[filament:Fillamentum CPE MMU1]
|
||||
inherits = *PETMMU1*
|
||||
filament_cost = 54.1
|
||||
filament_density = 1.25
|
||||
filament_type = CPE
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 275
|
||||
max_fan_speed = 50
|
||||
min_fan_speed = 50
|
||||
temperature = 275
|
||||
|
||||
[filament:Generic PET MMU1]
|
||||
inherits = *PETMMU1*
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.27
|
||||
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
|
||||
|
||||
[filament:Prusa PET MMU1]
|
||||
inherits = *PETMMU1*
|
||||
filament_cost = 27.82
|
||||
filament_density = 1.27
|
||||
filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nPlasty Mladec PETG"
|
||||
|
||||
[filament:Prusament PETG MMU1]
|
||||
inherits = *PETMMU1*
|
||||
first_layer_temperature = 240
|
||||
temperature = 250
|
||||
filament_cost = 24.99
|
||||
filament_density = 1.27
|
||||
filament_type = PETG
|
||||
|
||||
[filament:Taulman T-Glase MMU1]
|
||||
inherits = *PETMMU1*
|
||||
filament_cost = 40
|
||||
filament_density = 1.27
|
||||
bridge_fan_speed = 40
|
||||
cooling = 0
|
||||
fan_always_on = 0
|
||||
first_layer_bed_temperature = 90
|
||||
first_layer_temperature = 240
|
||||
max_fan_speed = 5
|
||||
min_fan_speed = 0
|
||||
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
|
||||
|
||||
[filament:SemiFlex or Flexfill 98A MMU1]
|
||||
inherits = *FLEX*
|
||||
filament_cost = 82
|
||||
filament_density = 1.22
|
||||
filament_max_volumetric_speed = 1.35
|
||||
filament_retract_length = nil
|
||||
filament_retract_speed = nil
|
||||
filament_retract_lift = nil
|
||||
compatible_printers_condition = printer_model=="MK2SMM"
|
||||
|
||||
[filament:Generic FLEX MMU1]
|
||||
inherits = *FLEX*
|
||||
filament_cost = 82
|
||||
filament_density = 1.22
|
||||
filament_max_volumetric_speed = 1.2
|
||||
filament_retract_length = 0
|
||||
filament_retract_speed = nil
|
||||
filament_retract_lift = nil
|
||||
compatible_printers_condition = printer_model=="MK2SMM"
|
||||
|
||||
[sla_print:*common*]
|
||||
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_SL1.*/
|
||||
layer_height = 0.05
|
||||
@ -2328,6 +2494,21 @@ extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
||||
|
||||
[printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK2.5S MMU2S
|
||||
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
||||
|
||||
[printer:Original Prusa i3 MK2.5 MMU2 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK2.5 MMU2
|
||||
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.20mm NORMAL 0.6 nozzle
|
||||
|
||||
# XXXXXXXXXXXXXXXXX
|
||||
# XXX--- MK3 ---XXX
|
||||
@ -2488,15 +2669,23 @@ extruder_colour = #FF8000;#DB5182;#00FFFF;#FF4F4F;#9FFF9F
|
||||
start_gcode = M115 U3.7.2 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG21 ; set units to millimeters\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3.0 F1000.0\nG1 Z0.4 F1000.0\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55.0 E29.0 F1073.0\nG1 X5.0 E29.0 F1800.0\nG1 X55.0 E8.0 F2000.0\nG1 Z0.3 F1000.0\nG92 E0.0\nG1 X240.0 E25.0 F2200.0\nG1 Y-2.0 F1000.0\nG1 X55.0 E25 F1400.0\nG1 Z0.20 F1000.0\nG1 X5.0 E4.0 F1000.0\nG92 E0.0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0.0\n
|
||||
end_gcode = {if has_wipe_tower}\nG1 E-15.0000 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15.0000 F5800\nG1 E-20.0000 F5500\nG1 E10.0000 F3000\nG1 E-10.0000 F3100\nG1 E10.0000 F3150\nG1 E-10.0000 F3250\nG1 E10.0000 F3300\n{endif}\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n; Lift print head a bit\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X0 Y200 F3000 ; home X axis\nM84 ; disable motors\n
|
||||
|
||||
# 0.6 nozzle MMU printer profile - only for single mode for now
|
||||
## 0.6mm nozzle MMU2/S printer profiles
|
||||
|
||||
# [printer:Original Prusa i3 MK3S MMU2S 0.6 nozzle]
|
||||
# inherits = Original Prusa i3 MK3S MMU2S
|
||||
# nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
||||
# max_layer_height = 0.40
|
||||
# min_layer_height = 0.15
|
||||
# printer_variant = 0.6
|
||||
# default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3
|
||||
[printer:Original Prusa i3 MK3S MMU2S 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK3S MMU2S
|
||||
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3
|
||||
|
||||
[printer:Original Prusa i3 MK3 MMU2 0.6 nozzle]
|
||||
inherits = Original Prusa i3 MK3 MMU2
|
||||
nozzle_diameter = 0.6,0.6,0.6,0.6,0.6
|
||||
max_layer_height = 0.40
|
||||
min_layer_height = 0.15
|
||||
printer_variant = 0.6
|
||||
default_print_profile = 0.30mm QUALITY 0.6 nozzle MK3
|
||||
|
||||
[printer:Original Prusa SL1]
|
||||
printer_technology = SLA
|
||||
|
||||
@ -134,7 +134,7 @@ public:
|
||||
m_filpar[idx].cooling_final_speed = cooling_final_speed;
|
||||
}
|
||||
|
||||
m_filpar[idx].filament_area = (M_PI/4.f) * pow(filament_diameter, 2); // all extruders are assumed to have the same filament diameter at this point
|
||||
m_filpar[idx].filament_area = float((M_PI/4.f) * pow(filament_diameter, 2)); // all extruders are assumed to have the same filament diameter at this point
|
||||
m_filpar[idx].nozzle_diameter = nozzle_diameter; // to be used in future with (non-single) multiextruder MM
|
||||
|
||||
if (max_volumetric_speed != 0.f)
|
||||
|
||||
@ -3,7 +3,7 @@
|
||||
|
||||
set(SLIC3R_APP_NAME "PrusaSlicer")
|
||||
set(SLIC3R_APP_KEY "PrusaSlicer")
|
||||
set(SLIC3R_VERSION "2.0.0")
|
||||
set(SLIC3R_VERSION "2.1.0-alpha0")
|
||||
set(SLIC3R_BUILD_ID "PrusaSlicer-${SLIC3R_VERSION}+UNKNOWN")
|
||||
set(SLIC3R_RC_VERSION "2,0,0,0")
|
||||
set(SLIC3R_RC_VERSION_DOTS "2.0.0.0")
|
||||
set(SLIC3R_RC_VERSION "2,1,0,0")
|
||||
set(SLIC3R_RC_VERSION_DOTS "2.1.0.0")
|
||||
|
||||
Loading…
Reference in New Issue
Block a user