Readded Photon Mono X

resources/profiles/Anycubic.ini

@@ -73,6 +73,13 @@ technology = FFF
 family = PREDATOR
 default_materials = Generic PLA @PREDATOR; Generic PETG @PREDATOR; Generic ABS @PREDATOR
 
+[printer_model:PHOTON MONO X]
+name = Photon Mono X
+variants = default
+technology = SLA
+family = PHOTON MONO
+default_materials = Generic Blue Resin @MONO 0.05
+
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.
 
@@ -2232,3 +2239,91 @@ use_volumetric_e = 0
 variable_layer_height = 1
 wipe = 0
 z_offset = 0
+
+########## SLA printer presets ##########
+
+[sla_print:*common print ANYCUBIC SLA*]
+compatible_printers_condition = printer_notes=~/.*PHOTONMONOX.*/
+layer_height = 0.05
+output_filename_format = [input_filename_base].pwmx
+pad_edge_radius = 0.5
+pad_enable = 0
+pad_max_merge_distance = 50
+pad_wall_height = 0
+pad_wall_thickness = 1
+pad_wall_slope = 45
+faded_layers = 8
+slice_closing_radius = 0.005
+support_base_diameter = 3
+support_base_height = 1
+support_critical_angle = 45
+support_density_at_45 = 250
+support_density_at_horizontal = 500
+support_head_front_diameter = 0.4
+support_head_penetration = 0.4
+support_head_width = 3
+support_max_bridge_length = 10
+support_minimal_z = 0
+support_object_elevation = 5
+support_pillar_diameter = 1
+support_pillar_connection_mode = zigzag
+support_pillar_widening_factor = 0
+supports_enable = 1
+support_small_pillar_diameter_percent = 60%
+
+[sla_print:0.05 Normal @ANYCUBIC]
+inherits = *common print ANYCUBIC SLA*
+layer_height = 0.05
+
+########### Materials
+
+[sla_material:*common ANYCUBIC SLA*]
+compatible_printers_condition = printer_notes=~/.*PHOTONMONOX.*/
+compatible_prints_condition = layer_height == 0.05
+exposure_time = 7
+initial_exposure_time = 40
+initial_layer_height = 0.05
+material_correction = 1,1,1
+material_notes = LIFT_DISTANCE=8.0\nLIFT_SPEED=2.5\nRETRACT_SPEED=3.0\nBOTTOM_LIFT_SPEED=2.0\nBOTTOM_LIFT_DISTANCE=9.0\nDELAY_BEFORE_EXPOSURE=0.5
+
+[sla_material:*common 0.05 ANYCUBIC SLA*]
+inherits = *common ANYCUBIC SLA*
+
+[sla_material:Generic Blue Resin @MONO 0.05]
+inherits = *common 0.05 ANYCUBIC SLA*
+exposure_time = 2.5
+initial_exposure_time = 40
+material_type = Tough
+material_vendor = Generic
+material_colour = #6080EC
+compatible_printers_condition = printer_notes=~/.*PHOTONMONOX.*/
+
+########## Printers
+
+[printer:Anycubic Photon Mono X]
+printer_technology = SLA
+printer_model = PHOTON MONO X
+printer_variant = default
+default_sla_material_profile = Generic Blue Resin @MONO 0.05
+default_sla_print_profile = 0.05 Normal @ANYCUBIC
+thumbnails = 224x168
+sla_archive_format = pwmx
+bed_shape = 1.48x1.02,193.48x1.02,193.48x121.02,1.48x121.02
+display_height = 120
+display_orientation = landscape
+display_mirror_x = 1
+display_mirror_y = 0
+display_pixels_x = 3840
+display_pixels_y = 2400
+display_width = 192
+max_print_height = 245
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+min_exposure_time = 1
+max_exposure_time = 120
+min_initial_exposure_time = 1
+max_initial_exposure_time = 300
+printer_correction = 1,1,1
+gamma_correction = 1
+area_fill = 45
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX\n