Merge branch 'master' into et_tm_sla_volumes_6-SPE-1285

2023-01-17 14:48:37 +01:00 · 2023-01-17 14:48:37 +01:00 · 57bdd8df6f
commit 57bdd8df6f
parent 873725d905 abb8e3d9b1
64 changed files with 2056 additions and 696 deletions
--- a/resources/profiles/BIQU.idx
+++ b/resources/profiles/BIQU.idx
@ -0,0 +1,2 @@
+min_slic3r_version = 2.6.0-alpha1
+0.1.0 Initial version
--- a/resources/profiles/BIQU.ini
+++ b/resources/profiles/BIQU.ini
@ -0,0 +1,437 @@
+# Print profiles for BIQU printers.
+# Based on PR https://github.com/slic3r/slic3r-profiles/pull/32 by @bkonosky
+
+
+[vendor]
+name = BIQU
+config_version = 0.1.0
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIQU/
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:BIQUBX]
+name = BIQU BX
+variants = 0.4
+technology = FFF
+bed_model = BX_Bed.stl
+bed_texture = BX_Texture.png
+default_materials = Generic PLA @BIQU; Generic PETG @BIQU; Generic ABS @BIQU
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+# Common print preset
+[print:*common*]
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = monotonic
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+complete_objects = 0
+bridge_acceleration = 250
+perimeter_acceleration = 500
+infill_acceleration = 500
+first_layer_acceleration = 500
+default_acceleration = 500
+dont_support_bridges = 1
+ensure_vertical_shell_thickness = 1
+external_perimeters_first = 0
+external_perimeter_speed = 25
+extra_perimeters = 0
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_height = 0.2
+elefant_foot_compensation = 0.1
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+interface_shells = 0
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
+perimeters = 2
+perimeter_extruder = 1
+perimeter_speed = 40
+raft_layers = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirts = 1
+skirt_distance = 3
+skirt_height = 2
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_bottom_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 1
+support_material_spacing = 2
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 40
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_perimeters = 1
+thin_walls = 1
+top_fill_pattern = monotonic
+top_solid_infill_speed = 30
+travel_speed = 150
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 160
+wipe_tower_y = 160
+xy_size_compensation = 0
+extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.43
+first_layer_extrusion_width = 0.55
+support_material_extrusion_width = 0.38
+top_infill_extrusion_width = 0.43
+
+[print:*0.08mm*]
+inherits = *common*
+layer_height = 0.08
+perimeters = 3
+bottom_solid_layers = 9
+top_solid_layers = 11
+bridge_flow_ratio = 0.7
+
+[print:*0.10mm*]
+inherits = *common*
+layer_height = 0.10
+perimeters = 3
+bottom_solid_layers = 7
+top_solid_layers = 9
+bridge_flow_ratio = 0.7
+
+[print:*0.12mm*]
+inherits = *common*
+layer_height = 0.12
+perimeters = 3
+bottom_solid_layers = 6
+top_solid_layers = 7
+bridge_flow_ratio = 0.7
+
+[print:*0.16mm*]
+inherits = *common*
+layer_height = 0.16
+bottom_solid_layers = 5
+top_solid_layers = 7
+bridge_flow_ratio = 0.85
+
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.20
+bottom_solid_layers = 4
+top_solid_layers = 5
+
+[print:*0.24mm*]
+inherits = *common*
+layer_height = 0.24
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:*0.28mm*]
+inherits = *common*
+layer_height = 0.28
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:*0.32mm*]
+inherits = *common*
+layer_height = 0.32
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:0.08mm HIGHDETAIL @BIQU]
+inherits = *0.08mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+
+[print:0.10mm HIGHDETAIL @BIQU]
+inherits = *0.10mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+
+[print:0.12mm DETAIL @BIQU]
+inherits = *0.12mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+
+[print:0.16mm OPTIMAL @BIQU]
+inherits = *0.16mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+
+[print:0.20mm NORMAL @BIQU]
+inherits = *0.20mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+
+[print:0.24mm DRAFT @BIQU]
+inherits = *0.24mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+
+[print:0.28mm SUPERDRAFT @BIQU]
+inherits = *0.28mm*
+compatible_printers_condition = printer_model=~/(BIQUBX).*/
+
+[filament:*common*]
+cooling = 0
+compatible_printers = 
+extrusion_multiplier = 1
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 20
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIQU.*/
+
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 60
+fan_below_layer_time = 100
+filament_colour = #DDDDDD
+filament_max_volumetric_speed = 15
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 20
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+fan_always_on = 1
+cooling = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+temperature = 205
+
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #DDDDDD
+filament_max_volumetric_speed = 8
+filament_type = PETG
+filament_density = 1.27
+filament_cost = 30
+first_layer_bed_temperature = 70
+first_layer_temperature = 240
+fan_always_on = 1
+max_fan_speed = 50
+min_fan_speed = 20
+bridge_fan_speed = 100
+temperature = 240
+
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 100
+cooling = 0
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #DDDDDD
+filament_max_volumetric_speed = 11
+filament_type = ABS
+filament_density = 1.04
+filament_cost = 20
+first_layer_bed_temperature = 100
+first_layer_temperature = 245
+fan_always_on = 0
+max_fan_speed = 0
+min_fan_speed = 0
+bridge_fan_speed = 30
+top_fan_speed = 0
+temperature = 245
+
+[filament:Generic PLA @BIQU]
+inherits = *PLA*
+filament_vendor = Generic
+
+[filament:Generic PETG @BIQU]
+inherits = *PET*
+filament_vendor = Generic
+
+[filament:Generic ABS @BIQU]
+inherits = *ABS*
+first_layer_bed_temperature = 90
+bed_temperature = 90
+filament_vendor = Generic
+
+
+
+# Common printer preset
+[printer:*common*]
+printer_technology = FFF
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n\n
+between_objects_gcode = 
+pause_print_gcode = 
+deretract_speed = 40
+extruder_colour = #FCE94F
+extruder_offset = 0x0
+gcode_flavor = marlin2
+silent_mode = 0
+remaining_times = 0
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1000
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 1000
+machine_max_acceleration_y = 1000
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 65
+machine_max_feedrate_x = 200
+machine_max_feedrate_y = 200
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
+max_layer_height = 0.28
+min_layer_height = 0.08
+max_print_height = 250
+nozzle_diameter = 0.4
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_before_wipe = 70%
+retract_layer_change = 1
+retract_length = 5
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 60
+single_extruder_multi_material = 0
+thumbnails = 16x16,220x124
+thumbnails_color = #018aff
+thumbnails_custom_color = 0
+thumbnails_end_file = 0
+thumbnails_format = PNG
+thumbnails_with_bed = 0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+z_step = 0.04
+printer_model = 
+default_print_profile = 0.16mm OPTIMAL @BIQU
+default_filament_profile = Generic PLA @BIQU
+start_gcode = M117 Initial homing sequence. ; Home so that the probe is positioned to heat\nG28\n\nM117 Probe heating position\nG0 X65 Y5 Z1 ; Move the probe to the heating position.\n\nM117 Getting the heaters up to temp!\nM104 S140 ; Set Extruder temperature, no wait\nM140 S[first_layer_bed_temperature] ; Set Heat Bed temperature\nM190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature\n\nM117 Waiting for probe to warm!\nG4 S90 ; Wait another 90s for the probe to absorb heat.\n\nM117 Post warming re-home\nG28 ; Home all axes again after warming\n\nM117 Z-Align\nG34\n\nM117 ABL Probing\nG29\n\nM900 K0 L0 T0 ; Edit the K and L values if you have calibrated a k factor for your filament\nM900 T0 S0\n\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y10 Z0.3 F5000.0 ; Move to start position\n\nM117 Getting the extruder up to temp\nM140 S[first_layer_bed_temperature] ; Set Heat Bed temperature\nM104 S{first_layer_temperature[initial_tool]} ; Set Extruder temperature\nM109 S{first_layer_temperature[initial_tool]} ; Wait for Extruder temperature\nM190 S[first_layer_bed_temperature] ; Wait for Heat Bed temperature\n\nG92 E0 ; Reset Extruder\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM117 Printing...\nG1 X8 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
+end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract a bit more and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z by 10mm\nG90 ;Return to absolute positioning\n\nG1 X0 Y{print_bed_max[1]*0.8} ;TaDaaaa\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z\n
+
+[printer:*spriteextruder*]
+retract_length = 0.6
+retract_speed = 40
+deretract_speed = 40
+retract_before_travel = 1
+retract_before_wipe = 0%
+
+# Intended for printers with dual extruders and a single hotend/nozzle, like the CR-X series
+[printer:*dualextruder*]
+single_extruder_multi_material = 1
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+extra_loading_move = -2
+parking_pos_retraction = 92
+deretract_speed = 40,40
+extruder_colour = #FCE94F;#729FCF
+extruder_offset = 0x0,0x0
+max_layer_height = 0.28,0.28
+min_layer_height = 0.08,0.08
+nozzle_diameter = 0.4,0.4
+retract_before_travel = 2,2
+retract_before_wipe = 70%,70%
+retract_layer_change = 1,1
+retract_length = 5,5
+retract_length_toolchange = 1,1
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 60,60
+wipe = 1,1
+
+[printer:*SmallBowden*]
+inherits = *common*
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+retract_before_travel = 2
+retract_length = 5
+retract_speed = 60
+deretract_speed = 40
+retract_before_wipe = 70%
+default_filament_profile = Generic PLA @BIQU
+
+[printer:*0.4nozzle*]
+nozzle_diameter = 0.4
+max_layer_height = 0.32
+min_layer_height = 0.04
+printer_variant = 0.4
+default_print_profile = 0.20mm NORMAL @BIQU
+
+[printer:*BIQU BX*]
+inherits = *common*; *spriteextruder*
+bed_shape =  0x0,250x0,250x250,0x250
+max_print_height = 250
+printer_model = BIQUBX
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIQU\nPRINTER_MODEL_BIQUBX
+
+[printer:BIQU BX]
+inherits = *BIQU BX*; *0.4nozzle*
--- a/resources/profiles/BIQU/BIQUBX_thumbnail.png
+++ b/resources/profiles/BIQU/BIQUBX_thumbnail.png
--- a/resources/profiles/BIQU/BX_Bed.stl
+++ b/resources/profiles/BIQU/BX_Bed.stl
--- a/resources/profiles/BIQU/BX_Texture.png
+++ b/resources/profiles/BIQU/BX_Texture.png
--- a/resources/profiles/Creality.idx
+++ b/resources/profiles/Creality.idx
@ -1,4 +1,8 @@
+min_slic3r_version = 2.6.0-alpha0
+0.2.6 Add Ender-5 Pro, Ender-5 S1, Sermoon-V1, Sermoon-V1 Pro. Unlock HIGHSPEED/SUPERSPEED presets for Ender-5 S1/Ender-6/Ender-7.
 min_slic3r_version = 2.5.0-alpha0
+0.2.4 Add SPEED presets. More conservative extruder clearance.
+0.2.3 Improve start_gcode's. Object labeling. MatterHackers filament profiles.
 0.2.2 General improvements.
 0.2.1 Added Ender 3 Neo and Ender 3 S1 Plus. Various updates.
 0.2.0 Added alternative nozzle support
--- a/resources/profiles/Creality.ini
+++ b/resources/profiles/Creality.ini
@ -5,7 +5,7 @@
 name = Creality
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 0.2.2
+config_version = 0.2.6
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Creality/
 # changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@ -131,14 +131,14 @@ bed_model = ender3_bed.stl
 bed_texture = ender3.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY

-#[printer_model:ENDER5PRO]
-#name = Creality Ender-5 Pro
-#variants = 0.4; 0.3; 0.5; 0.6
-#technology = FFF
-#family = ENDER
-#bed_model = ender3_bed.stl
-#bed_texture = ender3.svg
-#default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
+[printer_model:ENDER5PRO]
+name = Creality Ender-5 Pro
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = ENDER
+bed_model = ender3_bed.stl
+bed_texture = ender3.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY

 [printer_model:ENDER5PLUS]
 name = Creality Ender-5 Plus
@ -149,6 +149,15 @@ bed_model = ender5plus_bed.stl
 bed_texture = ender5plus.svg
 default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY

+[printer_model:ENDER5S1]
+name = Creality Ender-5 S1
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = ENDER
+bed_model = ender3_bed.stl
+bed_texture = ender3.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
+
 [printer_model:ENDER6]
 name = Creality Ender-6
 variants = 0.4; 0.3; 0.5; 0.6
@ -394,6 +403,28 @@ default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @



+[printer_model:SERMOONV1]
+name = Creality Sermoon-V1
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = SERMOON
+bed_model = sermoonv1_bed.stl
+bed_texture = sermoonv1.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
+
+
+
+[printer_model:SERMOONV1PRO]
+name = Creality Sermoon-V1 Pro
+variants = 0.4; 0.3; 0.5; 0.6
+technology = FFF
+family = SERMOON
+bed_model = sermoonv1_bed.stl
+bed_texture = sermoonv1.svg
+default_materials = Generic PLA @CREALITY; Generic PETG @CREALITY; Generic ABS @CREALITY; Creality PLA @CREALITY; Prusament PLA @CREALITY; Prusament PETG @CREALITY; AzureFilm PLA @CREALITY; Devil Design PLA @CREALITY; Devil Design PLA Matt @CREALITY; Devil Design PLA Galaxy @CREALITY; Extrudr PLA NX2 @CREALITY; Real Filament PLA @CREALITY; Velleman PLA @CREALITY; 3DJAKE ecoPLA @CREALITY; 3DJAKE ecoPLA Matt @CREALITY; 3DJAKE ecoPLA Tough @CREALITY; 123-3D Jupiter PLA @CREALITY; Verbatim PLA @CREALITY
+
+
+
 # All presets starting with asterisk, for example *common*, are intermediate and they will
 # not make it into the user interface.

@ -416,8 +447,8 @@ external_fill_pattern = rectilinear
 external_perimeters_first = 0
 external_perimeter_speed = 25
 extra_perimeters = 0
-extruder_clearance_height = 34
-extruder_clearance_radius = 47
+extruder_clearance_height = 25
+extruder_clearance_radius = 55
 fill_angle = 45
 fill_density = 15%
 fill_pattern = grid
@ -425,6 +456,7 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_every_layers = 1
 infill_extruder = 1
 infill_first = 0
@ -489,7 +521,62 @@ wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

+[print:*speed*]
+perimeter_speed = 60
+small_perimeter_speed = 30
+external_perimeter_speed = 30
+infill_speed = 60
+solid_infill_speed = 60
+top_solid_infill_speed = 30
+support_material_speed = 40
+support_material_interface_speed = 100%
+bridge_speed = 25
+ironing_speed = 15
+travel_speed = 150
+travel_speed_z = 0
+first_layer_speed = 20
+first_layer_speed_over_raft = 30

+[print:*highspeed*]
+perimeter_speed = 120
+small_perimeter_speed = 60
+external_perimeter_speed = 60
+infill_speed = 120
+solid_infill_speed = 120
+top_solid_infill_speed = 60
+support_material_speed = 80
+support_material_interface_speed = 100%
+bridge_speed = 50
+ironing_speed = 30
+travel_speed = 150
+travel_speed_z = 0
+first_layer_speed = 40
+first_layer_speed_over_raft = 60
+
+[print:*superspeed*]
+perimeter_speed = 180
+small_perimeter_speed = 90
+external_perimeter_speed = 90
+infill_speed = 180
+solid_infill_speed = 180
+top_solid_infill_speed = 90
+support_material_speed = 120
+support_material_interface_speed = 100%
+bridge_speed = 75
+ironing_speed = 45
+travel_speed = 250
+travel_speed_z = 0
+first_layer_speed = 60
+first_layer_speed_over_raft = 90
+
+
+
+[print:*0.06mm*]
+inherits = *common*
+layer_height = 0.06
+bottom_solid_layers = 11
+top_solid_layers = 13
+bridge_flow_ratio = 0.70

 [print:*0.08mm*]
 inherits = *common*
@ -609,6 +696,16 @@ support_material_extrusion_width = 0.54



+[print:0.06 mm ULTRADETAIL (0.3 mm nozzle) @CREALITY]
+inherits = *0.06mm*; *0.3nozzle*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.3 and printer_notes=~/.*PRINTER_HAS_ULTRADETAIL.*/
+
+[print:0.06 mm ULTRADETAIL (0.4 mm nozzle) @CREALITY]
+inherits = *0.06mm*; *0.4nozzle*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_ULTRADETAIL.*/
+
+
+
 [print:0.08 mm SUPERDETAIL (0.3 mm nozzle) @CREALITY]
 inherits = *0.08mm*; *0.3nozzle*
 compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.3
@ -685,6 +782,60 @@ compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle



+[print:0.16 mm OPTIMAL SPEED (0.3 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.3nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.3
+
+[print:0.16 mm OPTIMAL SPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.4nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
+
+[print:0.16 mm OPTIMAL SPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.5nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5
+
+[print:0.16 mm OPTIMAL SPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.6nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6
+
+
+
+[print:0.16 mm OPTIMAL HIGHSPEED (0.3 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.3nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.3 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.16 mm OPTIMAL HIGHSPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.4nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.16 mm OPTIMAL HIGHSPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.5nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.16 mm OPTIMAL HIGHSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.6nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+
+
+[print:0.16 mm OPTIMAL SUPERSPEED (0.3 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.3nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.3 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.16 mm OPTIMAL SUPERSPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.4nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.16 mm OPTIMAL SUPERSPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.5nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.16 mm OPTIMAL SUPERSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.16mm*; *0.6nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+
+
 [print:0.20 mm NORMAL (0.3 mm nozzle) @CREALITY]
 inherits = *0.20mm*; *0.3nozzle*
 compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.3
@ -704,6 +855,60 @@ compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle



+[print:0.20 mm NORMAL SPEED (0.3 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.3nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.3
+
+[print:0.20 mm NORMAL SPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.4nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
+
+[print:0.20 mm NORMAL SPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.5nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5
+
+[print:0.20 mm NORMAL SPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.6nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6
+
+
+
+[print:0.20 mm NORMAL HIGHSPEED (0.3 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.3nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.3 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.20 mm NORMAL HIGHSPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.4nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.20 mm NORMAL HIGHSPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.5nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.20 mm NORMAL HIGHSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.6nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+
+
+[print:0.20 mm NORMAL SUPERSPEED (0.3 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.3nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.3 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.20 mm NORMAL SUPERSPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.4nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.20 mm NORMAL SUPERSPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.5nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.20 mm NORMAL SUPERSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.20mm*; *0.6nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+
+
 [print:0.24 mm DRAFT (0.4 mm nozzle) @CREALITY]
 inherits = *0.24mm*; *0.4nozzle*
 renamed_from = "0.24mm DRAFT @CREALITY"; "0.24mm DRAFT @ENDER3"
@ -719,6 +924,48 @@ compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle



+[print:0.24 mm DRAFT SPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.24mm*; *0.4nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
+
+[print:0.24 mm DRAFT SPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.24mm*; *0.5nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5
+
+[print:0.24 mm DRAFT SPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.24mm*; *0.6nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6
+
+
+
+[print:0.24 mm DRAFT HIGHSPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.24mm*; *0.4nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.24 mm DRAFT HIGHSPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.24mm*; *0.5nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.24 mm DRAFT HIGHSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.24mm*; *0.6nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+
+
+[print:0.24 mm DRAFT SUPERSPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.24mm*; *0.4nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.24 mm DRAFT SUPERSPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.24mm*; *0.5nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.24 mm DRAFT SUPERSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.24mm*; *0.6nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+
+
 [print:0.28 mm SUPERDRAFT (0.4 mm nozzle) @CREALITY]
 inherits = *0.28mm*; *0.4nozzle*
 renamed_from = "0.28mm SUPERDRAFT @CREALITY"
@ -734,6 +981,48 @@ compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle



+[print:0.28 mm SUPERDRAFT SPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.28mm*; *0.4nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4
+
+[print:0.28 mm SUPERDRAFT SPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.28mm*; *0.5nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5
+
+[print:0.28 mm SUPERDRAFT SPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.28mm*; *0.6nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6
+
+
+
+[print:0.28 mm SUPERDRAFT HIGHSPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.28mm*; *0.4nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.28 mm SUPERDRAFT HIGHSPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.28mm*; *0.5nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.28 mm SUPERDRAFT HIGHSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.28mm*; *0.6nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+
+
+[print:0.28 mm SUPERDRAFT SUPERSPEED (0.4 mm nozzle) @CREALITY]
+inherits = *0.28mm*; *0.4nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.28 mm SUPERDRAFT SUPERSPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.28mm*; *0.5nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.28 mm SUPERDRAFT SUPERSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.28mm*; *0.6nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+
+
 [print:0.36 mm CHUNKY (0.5 mm nozzle) @CREALITY]
 inherits = *0.36mm*; *0.5nozzle*
 compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5
@ -744,12 +1033,60 @@ compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle



+[print:0.36 mm CHUNKY SPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.36mm*; *0.5nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5
+
+[print:0.36 mm CHUNKY SPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.36mm*; *0.6nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6
+
+
+
+[print:0.36 mm CHUNKY HIGHSPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.36mm*; *0.5nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+[print:0.36 mm CHUNKY HIGHSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.36mm*; *0.6nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+
+
+[print:0.36 mm CHUNKY SUPERSPEED (0.5 mm nozzle) @CREALITY]
+inherits = *0.36mm*; *0.5nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.5 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+[print:0.36 mm CHUNKY SUPERSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.36mm*; *0.6nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+
+
 [print:0.44 mm SUPERCHUNKY (0.6 mm nozzle) @CREALITY]
 inherits = *0.44mm*; *0.6nozzle*
 compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6



+[print:0.44 mm SUPERCHUNKY SPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.44mm*; *0.6nozzle*; *speed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6
+
+
+
+[print:0.44 mm SUPERCHUNKY HIGHSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.44mm*; *0.6nozzle*; *highspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_HIGHSPEED.*/
+
+
+
+[print:0.44 mm SUPERCHUNKY SUPERSPEED (0.6 mm nozzle) @CREALITY]
+inherits = *0.44mm*; *0.6nozzle*; *superspeed*
+compatible_printers_condition = printer_model=~/(ENDER|CR|SERMOON).*/ and nozzle_diameter[0]==0.6 and printer_notes=~/.*PRINTER_HAS_SUPERSPEED.*/
+
+
+
 # When submitting new filaments please print the following temperature tower at 0.1mm layer height:
 #   https://www.thingiverse.com/thing:2615842
 # Pay particular attention to bridging, overhangs and retractions.
@ -830,6 +1167,26 @@ bridge_fan_speed = 30
 top_fan_speed = 0
 temperature = 245

+[filament:*TPU*]
+inherits = *common*
+bed_temperature = 50
+cooling = 0
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #DDDDDD
+filament_max_volumetric_speed = 11
+filament_type = TPU
+filament_density = 1.2
+filament_cost = 30
+first_layer_bed_temperature = 55
+first_layer_temperature = 245
+fan_always_on = 0
+max_fan_speed = 0
+min_fan_speed = 0
+bridge_fan_speed = 30
+top_fan_speed = 0
+temperature = 245
+
 [filament:Generic PLA @CREALITY]
 inherits = *PLA*
 renamed_from = "Generic PLA @ENDER3"
@ -1109,6 +1466,50 @@ filament_cost = 16.99
 filament_density = 1.24
 filament_colour = #2862C4

+[filament:MatterHackers MH Build Series PLA @CREALITY]
+inherits = *PLA*
+filament_vendor = MatterHackers
+temperature = 205
+bed_temperature = 60
+first_layer_temperature = 210
+first_layer_bed_temperature = 60
+filament_cost = 20.87
+filament_density = 1.25
+filament_colour = #3598DB
+
+[filament:MatterHackers MH Build Series PETG @CREALITY]
+inherits = *PET*
+filament_vendor = MatterHackers
+temperature = 245
+bed_temperature = 60
+first_layer_temperature = 250
+first_layer_bed_temperature = 65
+filament_cost = 21.98
+filament_density = 1.27
+filament_colour = #3598DB
+
+[filament:MatterHackers MH Build Series ABS @CREALITY]
+inherits = *ABS*
+filament_vendor = MatterHackers
+temperature = 230
+bed_temperature = 90
+first_layer_temperature = 240
+first_layer_bed_temperature = 100
+filament_cost = 20.87
+filament_density = 1.07
+filament_colour = #3598DB
+
+[filament:MatterHackers MH Build Series TPU @CREALITY]
+inherits = *TPU*
+filament_vendor = MatterHackers
+temperature = 240
+bed_temperature = 50
+first_layer_temperature = 250
+first_layer_bed_temperature = 60
+filament_cost = 28.99
+filament_density = 1.12
+filament_colour = #3598DB
+


 # Common printer preset
@ -1165,7 +1566,7 @@ wipe = 1
 z_offset = 0
 printer_model = 
 default_filament_profile = "Generic PLA @CREALITY"
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.85} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors

 # Intended for printers that have exclusively shipped with a 32bit mainboard
@ -1174,19 +1575,19 @@ gcode_flavor = marlin2

 # Intended for printers equipped with a strain gauge mechanism, like the CR-6 series
 [printer:*straingauge*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM109 S{first_layer_temperature[0]-50} ; set temporary nozzle temp to prevent oozing during homing\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM109 S{first_layer_temperature[0]-50} ; set temporary nozzle temp to prevent oozing during homing\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG28 ; home all axis\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0

 # Intended for printers with a smaller bed, like the Ender-3 series
 [printer:*fastabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0

 # Intended for printers with a larger bed, like the CR-10 series
 [printer:*slowabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0

 # intended for printers that have RESTORE_LEVELING_AFTER_G28 enabled in firmware
 [printer:*storedabl*]
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nG4 S30 ; allow partial nozzle warmup\nG28 ; home all axis and restore leveling\nG1 Z50 F240\nG1 X2.0 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 X2.0 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 Y140 F5000\nG92 E0\nG1 X2.3 Y10 E10 F1200 ; prime the nozzle\nG92 E0

 # Intended for printers with vendor official firmware verified to support M25
 [printer:*pauseprint*]
@ -1238,7 +1639,7 @@ retract_before_wipe = 0%
 [printer:*0.3nozzle*]
 nozzle_diameter = 0.3
 printer_variant = 0.3
-min_layer_height = 0.08
+min_layer_height = 0.06
 max_layer_height = 0.24
 retract_lift_above = 0.2
 default_print_profile = "0.12 mm DETAIL (0.3 mm nozzle) @CREALITY"
@ -1246,7 +1647,7 @@ default_print_profile = "0.12 mm DETAIL (0.3 mm nozzle) @CREALITY"
 [printer:*0.4nozzle*]
 nozzle_diameter = 0.4
 printer_variant = 0.4
-min_layer_height = 0.08
+min_layer_height = 0.06
 max_layer_height = 0.32
 retract_lift_above = 0.2
 default_print_profile = "0.16 mm OPTIMAL (0.4 mm nozzle) @CREALITY"
@ -1405,7 +1806,7 @@ inherits = *common*; *storedabl*; *spriteextruder*; *pauseprint*
 bed_shape = 5x0,215x0,215x220,5x220
 max_print_height = 270
 printer_model = ENDER3S1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1\nPRINTER_HAS_ULTRADETAIL

 [printer:Creality Ender-3 S1 (0.3 mm nozzle)]
 inherits = *ENDER3S1*; *0.3nozzle*
@ -1427,7 +1828,7 @@ inherits = *common*; *storedabl*; *spriteextruder*; *pauseprint*
 bed_shape = 5x0,215x0,215x220,5x220
 max_print_height = 270
 printer_model = ENDER3S1PRO
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1PRO
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1PRO\nPRINTER_HAS_ULTRADETAIL

 [printer:Creality Ender-3 S1 Pro (0.3 mm nozzle)]
 inherits = *ENDER3S1PRO*; *0.3nozzle*
@ -1449,7 +1850,7 @@ inherits = *common*; *storedabl*; *spriteextruder*; *pauseprint*
 bed_shape = 5x5,295x5,295x295,5x295
 max_print_height = 300
 printer_model = ENDER3S1PLUS
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1PLUS
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3S1PLUS\nPRINTER_HAS_ULTRADETAIL

 [printer:Creality Ender-3 S1 Plus (0.3 mm nozzle)]
 inherits = *ENDER3S1PLUS*; *0.3nozzle*
@ -1554,26 +1955,26 @@ inherits = *ENDER5*; *0.6nozzle*



-#[printer:*ENDER5PRO*]
-#inherits = *common*; *bowdencapricorn*; *descendingz*
-#bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
-#max_print_height = 300
-#printer_model = ENDER5PRO
-#printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5PRO\nPRINTER_HAS_BOWDEN
-#machine_max_acceleration_e = 1000
-#machine_max_feedrate_z = 5
-#
-#[printer:Creality Ender-5 Pro (0.3 mm nozzle)]
-#inherits = *ENDER5PRO*; *0.3nozzle*
-#
-#[printer:Creality Ender-5 Pro (0.4 mm nozzle)]
-#inherits = *ENDER5PRO*; *0.4nozzle*
-#
-#[printer:Creality Ender-5 Pro (0.5 mm nozzle)]
-#inherits = *ENDER5PRO*; *0.5nozzle*
-#
-#[printer:Creality Ender-5 Pro (0.6 mm nozzle)]
-#inherits = *ENDER5PRO*; *0.6nozzle*
+[printer:*ENDER5PRO*]
+inherits = *common*; *bowdencapricorn*; *descendingz*
+bed_shape = 5x2.5,225x2.5,225x222.5,5x222.5
+max_print_height = 300
+printer_model = ENDER5PRO
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5PRO\nPRINTER_HAS_BOWDEN
+machine_max_acceleration_e = 1000
+machine_max_feedrate_z = 5
+
+[printer:Creality Ender-5 Pro (0.3 mm nozzle)]
+inherits = *ENDER5PRO*; *0.3nozzle*
+
+[printer:Creality Ender-5 Pro (0.4 mm nozzle)]
+inherits = *ENDER5PRO*; *0.4nozzle*
+
+[printer:Creality Ender-5 Pro (0.5 mm nozzle)]
+inherits = *ENDER5PRO*; *0.5nozzle*
+
+[printer:Creality Ender-5 Pro (0.6 mm nozzle)]
+inherits = *ENDER5PRO*; *0.6nozzle*



@ -1603,12 +2004,33 @@ inherits = *ENDER5PLUS*; *0.6nozzle*



+[printer:*ENDER5S1*]
+inherits = *common*; *descendingz*; *spriteextruder*
+bed_shape = 5x0,215x0,215x220,5x220
+max_print_height = 280
+printer_model = ENDER5S1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER5S1\nPRINTER_HAS_ULTRADETAIL\nPRINTER_HAS_HIGHSPEED\nPRINTER_HAS_SUPERSPEED
+
+[printer:Creality Ender-5 S1 (0.3 mm nozzle)]
+inherits = *ENDER5S1*; *0.3nozzle*
+
+[printer:Creality Ender-5 S1 (0.4 mm nozzle)]
+inherits = *ENDER5S1*; *0.4nozzle*
+
+[printer:Creality Ender-5 S1 (0.5 mm nozzle)]
+inherits = *ENDER5S1*; *0.5nozzle*
+
+[printer:Creality Ender-5 S1 (0.6 mm nozzle)]
+inherits = *ENDER5S1*; *0.6nozzle*
+
+
+
 [printer:*ENDER6*]
 inherits = *common*; *bowden*; *descendingz*
 bed_shape = 5x5,255x5,255x255,5x255
 max_print_height = 400
 printer_model = ENDER6
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER6\nPRINTER_HAS_BOWDEN
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER6\nPRINTER_HAS_BOWDEN\nPRINTER_HAS_HIGHSPEED

 [printer:Creality Ender-6 (0.3 mm nozzle)]
 inherits = *ENDER6*; *0.3nozzle*
@ -1630,7 +2052,7 @@ inherits = *common*; *bowden*; *descendingz*
 bed_shape = 5x5,245x5,245x245,5x245
 max_print_height = 300
 printer_model = ENDER7
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER7\nPRINTER_HAS_BOWDEN
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER7\nPRINTER_HAS_BOWDEN\nPRINTER_HAS_HIGHSPEED\nPRINTER_HAS_SUPERSPEED

 [printer:Creality Ender-7 (0.3 mm nozzle)]
 inherits = *ENDER7*; *0.3nozzle*
@ -1805,7 +2227,7 @@ inherits = *common*; *slowabl*; *spriteextruder*
 bed_shape = 5x5,295x5,295x295,5x295
 max_print_height = 400
 printer_model = CR10SMARTPRO
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SMARTPRO\nPRINTER_HAS_BOWDEN
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR10SMARTPRO\nPRINTER_HAS_ULTRADETAIL

 [printer:Creality CR-10 SMART Pro (0.3 mm nozzle)]
 inherits = *CR10SMARTPRO*; *0.3nozzle*
@ -2130,7 +2552,7 @@ inherits = *common*; *directdriveextruder*; *descendingz*
 bed_shape = 5x5,275x5,275x255,5x255
 max_print_height = 310
 printer_model = SERMOOND1
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_SERMOOND1\nPRINTER_HAS_BOWDEN
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_SERMOOND1

 [printer:Creality Sermoon-D1 (0.3 mm nozzle)]
 inherits = *SERMOOND1*; *0.3nozzle*
@ -2144,3 +2566,45 @@ inherits = *SERMOOND1*; *0.5nozzle*

 [printer:Creality Sermoon-D1 (0.6 mm nozzle)]
 inherits = *SERMOOND1*; *0.6nozzle*
+
+
+
+[printer:*SERMOONV1*]
+inherits = *common*; *spriteextruder*; *descendingz*
+bed_shape = 5x5,170x5,170x170,5x170
+max_print_height = 165
+printer_model = SERMOONV1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_SERMOONV1\nPRINTER_HAS_ULTRADETAIL
+
+[printer:Creality Sermoon-V1 (0.3 mm nozzle)]
+inherits = *SERMOONV1*; *0.3nozzle*
+
+[printer:Creality Sermoon-V1 (0.4 mm nozzle)]
+inherits = *SERMOONV1*; *0.4nozzle*
+
+[printer:Creality Sermoon-V1 (0.5 mm nozzle)]
+inherits = *SERMOONV1*; *0.5nozzle*
+
+[printer:Creality Sermoon-V1 (0.6 mm nozzle)]
+inherits = *SERMOONV1*; *0.6nozzle*
+
+
+
+[printer:*SERMOONV1PRO*]
+inherits = *common*; *spriteextruder*; *descendingz*
+bed_shape = 5x5,170x5,170x170,5x170
+max_print_height = 165
+printer_model = SERMOONV1PRO
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_SERMOONV1PRO\nPRINTER_HAS_ULTRADETAIL
+
+[printer:Creality Sermoon-V1 Pro (0.3 mm nozzle)]
+inherits = *SERMOONV1PRO*; *0.3nozzle*
+
+[printer:Creality Sermoon-V1 Pro (0.4 mm nozzle)]
+inherits = *SERMOONV1PRO*; *0.4nozzle*
+
+[printer:Creality Sermoon-V1 Pro (0.5 mm nozzle)]
+inherits = *SERMOONV1PRO*; *0.5nozzle*
+
+[printer:Creality Sermoon-V1 Pro (0.6 mm nozzle)]
+inherits = *SERMOONV1PRO*; *0.6nozzle*
--- a/resources/profiles/Elegoo.idx
+++ b/resources/profiles/Elegoo.idx
@ -1,3 +1,5 @@
+min_slic3r_version = 2.6.0-alpha1
+1.0.2 Added new printer models.
 min_slic3r_version = 2.5.0-alpha3
 1.0.1 Decreased bed size to 220x220.
 1.0.0 Initial version
--- a/resources/profiles/Elegoo.ini
+++ b/resources/profiles/Elegoo.ini
@ -6,7 +6,7 @@
 name = Elegoo
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.0.1
+config_version = 1.0.2
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Elegoo/

 # The printer models will be shown by the Configuration Wizard in this order,
@ -58,6 +58,33 @@ bed_model =
 bed_texture = 
 default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO

+[printer_model:NEPTUNE3MAX]
+name = Elegoo Neptune-3 Max
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+[printer_model:NEPTUNE3PLUS]
+name = Elegoo Neptune-3 Plus
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+[printer_model:NEPTUNE3PRO]
+name = Elegoo Neptune-3 Pro
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
 [printer_model:NEPTUNEX]
 name = Elegoo Neptune-X
 variants = 0.4
@ -428,26 +455,9 @@ retract_length = 5
 retract_speed = 60
 deretract_speed = 40
 retract_before_wipe = 70%
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors

-
-# Intended for printers with a smaller bed
-# [printer:*fastabl*]
-# start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
-
-# Intended for printers with a larger bed
-# [printer:*slowabl*]
-# start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
-
-# Intended for printers with vendor official firmware verified to support M25
-# [printer:*pauseprint*]
-# pause_print_gcode = M25 ; pause print
-
-# Intended for printers where the Z-axis lowers the print bed during printing
-# [printer:*invertedz*]
-# end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600{endif} ; Move print bed down\nG1 X50 Y50 F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+max_print_height-10} F600{endif} ; Move print bed down further down\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
-
 # Intended for printers with dual extruders and a single hotend/nozzle
 [printer:*dualextruder*]
 single_extruder_multi_material = 1
@ -473,7 +483,7 @@ retract_restart_extra = 0,0
 retract_restart_extra_toolchange = 0,0
 retract_speed = 60,60
 wipe = 1,1
-start_gcode = T[initial_tool] ; set active extruder\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder
+start_gcode = T[initial_tool] ; set active extruder\nM413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder
 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors

 # Copy of Creality CR-X config for the Neptune 2D (dual extruder, single hotend)
@ -482,29 +492,57 @@ end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2,
 inherits = Elegoo Neptune-2; *dualextruder*
 retract_length = 6,6
 printer_model = NEPTUNE2D
-printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D

 [printer:Elegoo Neptune-2S]
 inherits = Elegoo Neptune-2
 printer_model = NEPTUNE2S
-printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2S

 [printer:Elegoo Neptune-X]
 inherits = Elegoo Neptune-2
 max_print_height = 300
 printer_model = NEPTUNEX
-printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNEX

 [printer:Elegoo Neptune-3]
 inherits = Elegoo Neptune-2
 max_print_height = 280
-start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+start_gcode = M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
 printer_model = NEPTUNE3
-printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE3

 [printer:Elegoo Neptune-1]
 inherits = Elegoo Neptune-2
 bed_shape = 0x0,210x0,210x210,0x210
 max_print_height = 200
 printer_model = NEPTUNE1
-printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D\nPRINTER_HAS_BOWDEN
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE1
+
+[printer:Elegoo Neptune-3 Max]
+inherits = Elegoo Neptune-3
+retract_length = 2.5
+retract_speed = 25
+bed_shape = 0x0,420x0,420x420,0x420
+max_print_height = 500
+printer_model = NEPTUNE3MAX
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE3MAX
+
+[printer:Elegoo Neptune-3 Plus]
+inherits = Elegoo Neptune-3
+retract_length = 2.5
+retract_speed = 25
+bed_shape = 0x0,320x0,320x320,0x320
+max_print_height = 400
+printer_model = NEPTUNE3PLUS
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE3PLUS
+
+[printer:Elegoo Neptune-3 Pro]
+inherits = Elegoo Neptune-3
+bed_shape = 0x0,225x0,225x225,0x225
+max_print_height = 280
+retract_length = 2.5
+retract_speed = 25
+printer_model = NEPTUNE3PRO
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE3PRO
+
--- a/resources/profiles/Elegoo/NEPTUNE3MAX_thumbnail.png
+++ b/resources/profiles/Elegoo/NEPTUNE3MAX_thumbnail.png
--- a/resources/profiles/Elegoo/NEPTUNE3PLUS_thumbnail.png
+++ b/resources/profiles/Elegoo/NEPTUNE3PLUS_thumbnail.png
--- a/resources/profiles/Elegoo/NEPTUNE3PRO_thumbnail.png
+++ b/resources/profiles/Elegoo/NEPTUNE3PRO_thumbnail.png
--- a/resources/profiles/PrusaResearch.idx
+++ b/resources/profiles/PrusaResearch.idx
@ -1,4 +1,5 @@
 min_slic3r_version = 2.5.0-alpha0
+1.5.5 Added new Prusament Resin material profiles. Enabled g-code thumbnails for MK2.5 family printers.
 1.5.4 Added material profiles for Prusament Resin BioBased60.
 1.5.3 Added filament profiles for ColorFabb VarioShore TPU, FormFutura PP, NinjaTek NinjaFlex/Cheetah TPU and for multiple Eolas Prints filaments. Updated bridging settings in 50um and 70um profiles. 
 1.5.2 Added SLA material profiles.
--- a/resources/profiles/PrusaResearch.ini
+++ b/resources/profiles/PrusaResearch.ini
@ -5,7 +5,7 @@
 name = Prusa Research
 # Configuration version of this file. Config file will only be installed, if the config_version differs.
 # This means, the server may force the PrusaSlicer configuration to be downgraded.
-config_version = 1.5.4
+config_version = 1.5.5
 # Where to get the updates from?
 config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PrusaResearch/
 changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
@ -4065,7 +4065,6 @@ inherits = *FLEX*
 filament_vendor = Eolas Prints
 filament_cost = 34.99
 filament_density = 1.21
-filament_spool_weight = 1000
 filament_colour = #4D9398
 filament_max_volumetric_speed = 1.2
 temperature = 235
@ -5755,6 +5754,14 @@ material_type = Tough
 material_vendor = BlueCast
 material_colour = #007EFD

+[sla_material:BlueCast X-One @0.025]
+inherits = *common 0.025*
+exposure_time = 25
+initial_exposure_time = 35
+material_type = Casting
+material_vendor = BlueCast
+material_colour = #C0C0C0
+
 [sla_material:DruckWege Type D High Temp @0.025]
 inherits = *common 0.025*
 exposure_time = 6
@ -5957,6 +5964,14 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #FCB30E

+[sla_material:Prusament Resin Tough Classic Red @0.025]
+inherits = *common 0.025*
+exposure_time = 3
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #EC0000
+
 [sla_material:Prusament Resin BioBased60 Herbal Green @0.025]
 inherits = *common 0.025*
 exposure_time = 7
@ -5981,6 +5996,22 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #ECDE05

+[sla_material:Prusament Resin Flex80 Transparent Clear @0.025]
+inherits = *common 0.025*
+exposure_time = 10
+initial_exposure_time = 30
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #F3F6F4
+
+[sla_material:Prusament Resin Flex80 Black @0.025]
+inherits = *common 0.025*
+exposure_time = 8
+initial_exposure_time = 30
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #595959
+
 ## Prusa 0.025
  
 [sla_material:Prusa Orange Tough @0.025]
@ -6432,6 +6463,14 @@ material_type = Tough
 material_vendor = BlueCast
 material_colour = #007EFD

+[sla_material:BlueCast X-One @0.05]
+inherits = *common 0.05*
+exposure_time = 27
+initial_exposure_time = 35
+material_type = Casting
+material_vendor = BlueCast
+material_colour = #C0C0C0
+
 [sla_material:DruckWege Type D High Temp @0.05]
 inherits = *common 0.05*
 exposure_time = 10
@ -6938,6 +6977,14 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #FCB30E

+[sla_material:Prusament Resin Tough Classic Red @0.05]
+inherits = *common 0.05*
+exposure_time = 4
+initial_exposure_time = 35
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #EC0000
+
 [sla_material:Prusament Resin BioBased60 Herbal Green @0.05]
 inherits = *common 0.05*
 exposure_time = 8
@ -6962,6 +7009,22 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #ECDE05

+[sla_material:Prusament Resin Flex80 Transparent Clear @0.05]
+inherits = *common 0.05*
+exposure_time = 15
+initial_exposure_time = 30
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #F3F6F4
+
+[sla_material:Prusament Resin Flex80 Black @0.05]
+inherits = *common 0.05*
+exposure_time = 10
+initial_exposure_time = 30
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #595959
+
 ## Prusa 0.05

 [sla_material:Prusa Beige Tough @0.05]
@ -7252,6 +7315,14 @@ material_type = Tough
 material_vendor = BlueCast
 material_colour = #FFEEE6

+[sla_material:BlueCast X-One @0.1]
+inherits = *common 0.1*
+exposure_time = 30
+initial_exposure_time = 45
+material_type = Casting
+material_vendor = BlueCast
+material_colour = #C0C0C0
+
 [sla_material:Ameralabs TGM-7 LED @0.1]
 inherits = *common 0.1*
 exposure_time = 10
@ -7286,6 +7357,14 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #808080

+[sla_material:Prusament Resin Tough Classic Red @0.1]
+inherits = *common 0.1*
+exposure_time = 6
+initial_exposure_time = 45
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #EC0000
+
 [sla_material:Prusament Resin Tough Sandstone Model @0.1]
 inherits = *common 0.1*
 exposure_time = 13
@ -7374,6 +7453,22 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #ECDE05

+[sla_material:Prusament Resin Flex80 Transparent Clear @0.1]
+inherits = *common 0.1*
+exposure_time = 20
+initial_exposure_time = 30
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #F3F6F4
+
+[sla_material:Prusament Resin Flex80 Black @0.1]
+inherits = *common 0.1*
+exposure_time = 13
+initial_exposure_time = 30
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #595959
+
 ## Prusa 0.1

 [sla_material:Prusa Orange Tough @0.1]
@ -7590,6 +7685,14 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #FCB30E

+[sla_material:Prusament Resin Tough Classic Red @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 1.8
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #EC0000
+
 [sla_material:Prusament Resin BioBased60 Herbal Green @0.025 SL1S]
 inherits = *0.025_sl1s*
 exposure_time = 3.5
@ -7615,6 +7718,24 @@ material_vendor = Prusa Polymers
 material_colour = #ECDE05
 material_print_speed = slow

+[sla_material:Prusament Resin Flex80 Transparent Clear @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 4
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #F3F6F4
+material_print_speed = slow
+
+[sla_material:Prusament Resin Flex80 Black @0.025 SL1S]
+inherits = *0.025_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #595959
+material_print_speed = slow
+
 ## Made for Prusa 0.025

 [sla_material:Prusa Orange Tough @0.025 SL1S]
@ -8042,6 +8163,14 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #FCB30E

+[sla_material:Prusament Resin Tough Classic Red @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 2
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #EC0000
+
 [sla_material:Prusament Resin BioBased60 Herbal Green @0.05 SL1S]
 inherits = *0.05_sl1s*
 exposure_time = 4
@ -8067,6 +8196,24 @@ material_vendor = Prusa Polymers
 material_colour = #ECDE05
 material_print_speed = slow

+[sla_material:Prusament Resin Flex80 Transparent Clear @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 5
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #F3F6F4
+material_print_speed = slow
+
+[sla_material:Prusament Resin Flex80 Black @0.05 SL1S]
+inherits = *0.05_sl1s*
+exposure_time = 3
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #595959
+material_print_speed = slow
+
 ## Made for Prusa 0.05

 [sla_material:Prusa Orange Tough @0.05 SL1S]
@ -8798,6 +8945,14 @@ material_type = Tough
 material_vendor = Prusa Polymers
 material_colour = #FCB30E

+[sla_material:Prusament Resin Tough Classic Red @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 2.6
+initial_exposure_time = 25
+material_type = Tough
+material_vendor = Prusa Polymers
+material_colour = #EC0000
+
 [sla_material:Prusament Resin BioBased60 Herbal Green @0.1 SL1S]
 inherits = *0.1_sl1s*
 exposure_time = 5
@ -8823,6 +8978,24 @@ material_vendor = Prusa Polymers
 material_colour = #ECDE05
 material_print_speed = slow

+[sla_material:Prusament Resin Flex80 Transparent Clear @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 6
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #F3F6F4
+material_print_speed = slow
+
+[sla_material:Prusament Resin Flex80 Black @0.1 SL1S]
+inherits = *0.1_sl1s*
+exposure_time = 3.5
+initial_exposure_time = 25
+material_type = Flexible
+material_vendor = Prusa Polymers
+material_colour = #595959
+material_print_speed = slow
+
 ## Made for Prusa 0.1

 [sla_material:Prusa Orange Tough @0.1 SL1S]
@ -9312,6 +9485,8 @@ printer_model = MK2.5
 remaining_times = 1
 machine_max_jerk_e = 4.5
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
+thumbnails = 160x120

 [printer:Original Prusa i3 MK2.5 0.25 nozzle]
 inherits = Original Prusa i3 MK2S 0.25 nozzle
@ -9319,6 +9494,8 @@ printer_model = MK2.5
 remaining_times = 1
 machine_max_jerk_e = 4.5
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\nG92 E0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
+thumbnails = 160x120

 [printer:Original Prusa i3 MK2.5 0.6 nozzle]
 inherits = Original Prusa i3 MK2S 0.6 nozzle
@ -9327,6 +9504,8 @@ remaining_times = 1
 machine_max_jerk_e = 4.5
 deretract_speed = 25
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
+thumbnails = 160x120

 [printer:Original Prusa i3 MK2.5 0.8 nozzle]
 inherits = Original Prusa i3 MK2S 0.6 nozzle
@ -9342,9 +9521,11 @@ retract_lift = 0.25
 remaining_times = 1
 machine_max_jerk_e = 4.5
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n{if filament_settings_id[initial_tool]=~/.*Prusament PA11.*/}\nG1 Z0.3 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E9 F1000 ; intro line\n{else}\nG1 Z0.2 F720\nG1 Y-3 F1000 ; go outside print area\nG92 E0\nG1 X60 E9 F1000 ; intro line\nG1 X100 E12.5 F1000 ; intro line\n{endif}\nG92 E0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
 default_print_profile = 0.40mm QUALITY @0.8 nozzle
 default_filament_profile = Prusament PLA @0.8 nozzle
 color_change_gcode = M600\nG1 E0.6 F1500 ; prime after color change
+thumbnails = 160x120

 [printer:Original Prusa i3 MK2.5 MMU2 Single]
 inherits = *25mm2*
@ -9379,7 +9560,7 @@ single_extruder_multi_material = 1
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

 [printer:Original Prusa i3 MK2.5S]
 inherits = Original Prusa i3 MK2.5
@ -9406,7 +9587,7 @@ default_print_profile = 0.15mm OPTIMAL @MK2.5
 default_filament_profile = Prusament PLA
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2.5\n
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

 [printer:Original Prusa i3 MK2.5S MMU2S Single 0.8 nozzle]
 inherits = Original Prusa i3 MK2.5S MMU2S Single
@ -9457,7 +9638,7 @@ single_extruder_multi_material = 1
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\nG92 E0\n
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 X0 Y210 F7200\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM104 S0 ; turn off temperature\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

 [printer:Original Prusa i3 MK2.5S MMU2S 0.6 nozzle]
 inherits = Original Prusa i3 MK2.5S MMU2S
@ -9527,7 +9708,7 @@ color_change_gcode = M600\nG1 E0.3 F1500 ; prime after color change

 [printer:Original Prusa i3 MK3]
 inherits = *common*
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
 machine_max_acceleration_e = 5000,5000
 machine_max_acceleration_extruding = 1250,1250
 machine_max_acceleration_retracting = 1250,1250
@ -9659,7 +9840,7 @@ inherits = *mm2*
 single_extruder_multi_material = 0
 default_filament_profile = Prusament PLA
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

 [printer:Original Prusa i3 MK3 MMU2 Single 0.6 nozzle]
 inherits = Original Prusa i3 MK3 MMU2 Single
@ -9707,7 +9888,7 @@ machine_max_acceleration_e = 8000,8000
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E32 F1073\nG1 X5 E32 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single]
 inherits = *mm2s*
@ -9715,7 +9896,7 @@ renamed_from = "Original Prusa i3 MK3S MMU2S Single"
 single_extruder_multi_material = 0
 default_filament_profile = Prusament PLA
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nTx\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nTc\n; purge line\nG1 X55 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM702 C\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

 [printer:Original Prusa i3 MK3S & MK3S+ MMU2S Single 0.6 nozzle]
 inherits = Original Prusa i3 MK3S & MK3S+ MMU2S Single
@ -9766,7 +9947,7 @@ machine_max_acceleration_e = 8000,8000
 nozzle_diameter = 0.4,0.4,0.4,0.4,0.4
 extruder_colour = #FF8000;#DB5182;#3EC0FF;#FF4F4F;#FBEB7D
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nM862.1 P[nozzle_diameter] ; nozzle diameter check\nM115 U3.11.0 ; tell printer latest fw version\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\n\n; Send the filament type to the MMU2.0 unit.\n; E stands for extruder number, F stands for filament type (0: default; 1:flex; 2: PVA)\nM403 E0 F{"" + ((filament_type[0]=="FLEX") ? 1 : ((filament_type[0]=="PVA") ? 2 : 0))}\nM403 E1 F{"" + ((filament_type[1]=="FLEX") ? 1 : ((filament_type[1]=="PVA") ? 2 : 0))}\nM403 E2 F{"" + ((filament_type[2]=="FLEX") ? 1 : ((filament_type[2]=="PVA") ? 2 : 0))}\nM403 E3 F{"" + ((filament_type[3]=="FLEX") ? 1 : ((filament_type[3]=="PVA") ? 2 : 0))}\nM403 E4 F{"" + ((filament_type[4]=="FLEX") ? 1 : ((filament_type[4]=="PVA") ? 2 : 0))}\n\n{if not has_single_extruder_multi_material_priming}\n;go outside print area\nG1 Y-3 F1000\nG1 Z0.4 F1000\n; select extruder\nT[initial_tool]\n; initial load\nG1 X55 E29 F1073\nG1 X5 E29 F1800\nG1 X55 E8 F2000\nG1 Z0.3 F1000\nG92 E0\nG1 X240 E25 F2200\nG1 Y-2 F1000\nG1 X55 E25 F1400\nG1 Z0.2 F1000\nG1 X5 E4 F1000\nG92 E0\n{endif}\n\nM221 S{if layer_height<0.075}100{else}95{endif}\nG92 E0\n\n; Don't change E values below. Excessive value can damage the printer.\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE).*/}M907 E430 ; set extruder motor current{endif}\n{if print_settings_id=~/.*(SPEED @MK3|DRAFT @MK3).*/}M907 E538 ; set extruder motor current{endif}
-end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y210 F7200 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\n{if has_wipe_tower}\nG1 E-15 F3000\n{else}\nG1 E2 F5000\nG1 E2 F5500\nG1 E2 F6000\nG1 E-15 F5800\nG1 E-20 F5500\nG1 E10 F3000\nG1 E-10 F3100\nG1 E10 F3150\nG1 E-10 F3250\nG1 E10 F3300\n{endif}\n\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\n\n; Unload filament\nM702 C\n\nG4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\n{if print_settings_id=~/.*(DETAIL @MK3|QUALITY @MK3|SOLUBLE|@0.25 nozzle MK3).*/}M907 E538 ; reset extruder motor current{endif}\nM104 S0 ; turn off temperature\nM84 ; disable motors\n; max_layer_z = [max_layer_z]

 ## 0.6mm nozzle MMU2/S printer profiles

@ -9883,7 +10064,7 @@ retract_layer_change = 1
 silent_mode = 0
 remaining_times = 1
 start_gcode = M862.3 P \"[printer_model]\" ; printer model check\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S170 ; set extruder temp for bed leveling\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 R170 ; wait for bed leveling temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM204 T1250 ; set travel acceleration\nG28 ; home all without mesh bed level\nG29 ; mesh bed leveling \nM204 T[machine_max_acceleration_travel] ; restore travel acceleration\nM104 S[first_layer_temperature] ; set extruder temp\nG92 E0\nG1 Y-2 X179 F2400\nG1 Z3 F720\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; intro line\nG1 X170 F1000\nG1 Z0.2 F720\nG1 X110 E8 F900\nG1 X40 E10 F700\nG92 E0\n\nM221 S95 ; set flow
-end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors
+end_gcode = G1 E-1 F2100 ; retract\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F720 ; Move print head up{endif}\nG1 X178 Y178 F4200 ; park print head\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+30, max_print_height)} F720 ; Move print head further up{endif}\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM84 ; disable motors\n; max_layer_z = [max_layer_z]
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MINI\n
 extruder_colour = 
 color_change_gcode = M600