From 3a445c99fb147333421fd64c906d004f6f2692bd Mon Sep 17 00:00:00 2001 From: Pascal de Bruijn Date: Sun, 30 May 2021 17:33:58 +0200 Subject: [PATCH 1/5] creality.ini: use 150C during ABL again initially ABL temp was lowered to 120C for straingauge ABL (G29), but since we're no longer doing ABL on each print for straingauge printers like the CR6 series, we can raise the temp a little again --- resources/profiles/Creality.ini | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini index 717b49558..3735dc4de 100644 --- a/resources/profiles/Creality.ini +++ b/resources/profiles/Creality.ini @@ -846,16 +846,16 @@ z_offset = 0 printer_model = default_print_profile = 0.16mm OPTIMAL @CREALITY default_filament_profile = Generic PLA @CREALITY -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors # Intended for printers with a smaller bed, like the Ender-3 series [printer:*fastabl*] -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 # Intended for printers with a larger bed, like the CR-10 series [printer:*slowabl*] -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 # Intended for printers with vendor official firmware verified to support M25 [printer:*pauseprint*] From a934960c008532f09e20845cb14b30bbf500608a Mon Sep 17 00:00:00 2001 From: Pascal de Bruijn Date: Sun, 30 May 2021 17:48:54 +0200 Subject: [PATCH 2/5] creality: special start_gcode for straingauge printers --- resources/profiles/Creality.ini | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini index 3735dc4de..9b2ad328a 100644 --- a/resources/profiles/Creality.ini +++ b/resources/profiles/Creality.ini @@ -849,6 +849,10 @@ default_filament_profile = Generic PLA @CREALITY start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors +# Intended for printers equipped with a strain gauge mechanism, like the CR-6 series +[printer:*straingauge*] +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature} ; set final bed temp\nM109 S{first_layer_temperature-50} ; set temporary nozzle temp to prevent oozing during homing\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature} ; set final nozzle temp\nM190 S{first_layer_bed_temperature} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 + # Intended for printers with a smaller bed, like the Ender-3 series [printer:*fastabl*] start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 @@ -981,13 +985,13 @@ printer_model = CR5PROH printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR5PROH\nPRINTER_HAS_BOWDEN [printer:Creality CR-6 SE] -inherits = *common*; *pauseprint* +inherits = *common*; *straingauge*; *pauseprint* bed_shape = 5x0,230x0,230x235,5x235 printer_model = CR6SE printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_CR6SE\nPRINTER_HAS_BOWDEN [printer:Creality CR-6 Max] -inherits = *common*; *slowabl* +inherits = *common*; *straingauge* retract_length = 6 bed_shape = 5x5,395x5,395x395,5x395 max_print_height = 400 From ddb556db66d3843f4467a082042ac0c7c257a7d6 Mon Sep 17 00:00:00 2001 From: Pascal de Bruijn Date: Sun, 30 May 2021 17:55:18 +0200 Subject: [PATCH 3/5] creality.ini: internal start_gcode consistency improvements --- resources/profiles/Creality.ini | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini index 9b2ad328a..8528fcd92 100644 --- a/resources/profiles/Creality.ini +++ b/resources/profiles/Creality.ini @@ -791,7 +791,7 @@ filament_colour = #C7F935 # Common printer preset [printer:*common*] printer_technology = FFF -before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n +before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;{layer_z}\n\n between_objects_gcode = pause_print_gcode = deretract_speed = 40 @@ -816,7 +816,7 @@ machine_max_jerk_y = 8 machine_max_jerk_z = 0.4 machine_min_extruding_rate = 0 machine_min_travel_rate = 0 -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z} max_layer_height = 0.28 min_layer_height = 0.08 max_print_height = 250 @@ -846,7 +846,7 @@ z_offset = 0 printer_model = default_print_profile = 0.16mm OPTIMAL @CREALITY default_filament_profile = Generic PLA @CREALITY -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature} ; set final nozzle temp\nM190 S{first_layer_bed_temperature} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors # Intended for printers equipped with a strain gauge mechanism, like the CR-6 series @@ -855,11 +855,11 @@ start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 # Intended for printers with a smaller bed, like the Ender-3 series [printer:*fastabl*] -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature} ; set final nozzle temp\nM190 S{first_layer_bed_temperature} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 # Intended for printers with a larger bed, like the CR-10 series [printer:*slowabl*] -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM190 S{first_layer_bed_temperature} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature} ; set final nozzle temp\nM109 S{first_layer_temperature} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 # Intended for printers with vendor official firmware verified to support M25 [printer:*pauseprint*] From 166790c49e0985cdeabb1e57d46a7014b5048734 Mon Sep 17 00:00:00 2001 From: Pascal de Bruijn Date: Sun, 30 May 2021 20:37:02 +0200 Subject: [PATCH 4/5] creality.ini: fix new placeholder syntax --- resources/profiles/Creality.ini | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini index 8528fcd92..f3e18cf3b 100644 --- a/resources/profiles/Creality.ini +++ b/resources/profiles/Creality.ini @@ -846,20 +846,20 @@ z_offset = 0 printer_model = default_print_profile = 0.16mm OPTIMAL @CREALITY default_filament_profile = Generic PLA @CREALITY -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature} ; set final nozzle temp\nM190 S{first_layer_bed_temperature} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors # Intended for printers equipped with a strain gauge mechanism, like the CR-6 series [printer:*straingauge*] -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature} ; set final bed temp\nM109 S{first_layer_temperature-50} ; set temporary nozzle temp to prevent oozing during homing\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature} ; set final nozzle temp\nM190 S{first_layer_bed_temperature} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM109 S{first_layer_temperature[0]-50} ; set temporary nozzle temp to prevent oozing during homing\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 # Intended for printers with a smaller bed, like the Ender-3 series [printer:*fastabl*] -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature} ; set final nozzle temp\nM190 S{first_layer_bed_temperature} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 # Intended for printers with a larger bed, like the CR-10 series [printer:*slowabl*] -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM190 S{first_layer_bed_temperature} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature} ; set final nozzle temp\nM109 S{first_layer_temperature} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 # Intended for printers with vendor official firmware verified to support M25 [printer:*pauseprint*] From 3abc0b84a4dc2828e5f3cd1f84345946e80fab34 Mon Sep 17 00:00:00 2001 From: Pascal de Bruijn Date: Mon, 31 May 2021 20:00:41 +0200 Subject: [PATCH 5/5] creality.ini: straingauge start_gcode wait for bed temp to settle as well given this applies to a larger bed printer as well (CR-6 Max). --- resources/profiles/Creality.ini | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/resources/profiles/Creality.ini b/resources/profiles/Creality.ini index f3e18cf3b..b41f134e5 100644 --- a/resources/profiles/Creality.ini +++ b/resources/profiles/Creality.ini @@ -851,7 +851,7 @@ end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, # Intended for printers equipped with a strain gauge mechanism, like the CR-6 series [printer:*straingauge*] -start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM109 S{first_layer_temperature[0]-50} ; set temporary nozzle temp to prevent oozing during homing\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 +start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM109 S{first_layer_temperature[0]-50} ; set temporary nozzle temp to prevent oozing during homing\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 # Intended for printers with a smaller bed, like the Ender-3 series [printer:*fastabl*]