diff --git a/src/libslic3r/Brim.cpp b/src/libslic3r/Brim.cpp index 061cf1423..8bd9b2fc2 100644 --- a/src/libslic3r/Brim.cpp +++ b/src/libslic3r/Brim.cpp @@ -490,7 +490,7 @@ static void make_inner_brim(const Print &print, loops = union_pt_chained_outside_in(loops); std::reverse(loops.begin(), loops.end()); - extrusion_entities_append_loops(brim.entities, std::move(loops), erSkirt, float(flow.mm3_per_mm()), + extrusion_entities_append_loops(brim.entities, std::move(loops), ExtrusionRole::Skirt, float(flow.mm3_per_mm()), float(flow.width()), float(print.skirt_first_layer_height())); } @@ -672,7 +672,7 @@ ExtrusionEntityCollection make_brim(const Print &print, PrintTryCancel try_cance if (i + 1 == j && first_path.size() > 3 && first_path.front().x() == first_path.back().x() && first_path.front().y() == first_path.back().y()) { auto *loop = new ExtrusionLoop(); brim.entities.emplace_back(loop); - loop->paths.emplace_back(erSkirt, float(flow.mm3_per_mm()), float(flow.width()), float(print.skirt_first_layer_height())); + loop->paths.emplace_back(ExtrusionRole::Skirt, float(flow.mm3_per_mm()), float(flow.width()), float(print.skirt_first_layer_height())); Points &points = loop->paths.front().polyline.points; points.reserve(first_path.size()); for (const ClipperLib_Z::IntPoint &pt : first_path) @@ -683,7 +683,7 @@ ExtrusionEntityCollection make_brim(const Print &print, PrintTryCancel try_cance ExtrusionEntityCollection this_loop_trimmed; this_loop_trimmed.entities.reserve(j - i); for (; i < j; ++ i) { - this_loop_trimmed.entities.emplace_back(new ExtrusionPath(erSkirt, float(flow.mm3_per_mm()), float(flow.width()), float(print.skirt_first_layer_height()))); + this_loop_trimmed.entities.emplace_back(new ExtrusionPath(ExtrusionRole::Skirt, float(flow.mm3_per_mm()), float(flow.width()), float(print.skirt_first_layer_height()))); const ClipperLib_Z::Path &path = *loops_trimmed_order[i].first; Points &points = dynamic_cast(this_loop_trimmed.entities.back())->polyline.points; points.reserve(path.size()); @@ -699,7 +699,7 @@ ExtrusionEntityCollection make_brim(const Print &print, PrintTryCancel try_cance } } } else { - extrusion_entities_append_loops_and_paths(brim.entities, std::move(all_loops), erSkirt, float(flow.mm3_per_mm()), float(flow.width()), float(print.skirt_first_layer_height())); + extrusion_entities_append_loops_and_paths(brim.entities, std::move(all_loops), ExtrusionRole::Skirt, float(flow.mm3_per_mm()), float(flow.width()), float(print.skirt_first_layer_height())); } make_inner_brim(print, top_level_objects_with_brim, bottom_layers_expolygons, brim); diff --git a/src/libslic3r/ExtrusionEntity.cpp b/src/libslic3r/ExtrusionEntity.cpp index 013d2efea..e180fcfcd 100644 --- a/src/libslic3r/ExtrusionEntity.cpp +++ b/src/libslic3r/ExtrusionEntity.cpp @@ -322,8 +322,29 @@ double ExtrusionLoop::min_mm3_per_mm() const return min_mm3_per_mm; } +// Convert a rich bitmask based ExtrusionRole to a less expressive ordinal GCodeExtrusionRole. +// GCodeExtrusionRole is to be serialized into G-code and deserialized by G-code viewer, +GCodeExtrusionRole extrusion_role_to_gcode_extrusion_role(ExtrusionRole role) +{ + if (role == ExtrusionRole::None) return erNone; + if (role == ExtrusionRole::Perimeter) return erPerimeter; + if (role == ExtrusionRole::ExternalPerimeter) return erExternalPerimeter; + if (role == ExtrusionRole::OverhangPerimeter) return erOverhangPerimeter; + if (role == ExtrusionRole::InternalInfill) return erInternalInfill; + if (role == ExtrusionRole::SolidInfill) return erSolidInfill; + if (role == ExtrusionRole::TopSolidInfill) return erTopSolidInfill; + if (role == ExtrusionRole::Ironing) return erIroning; + if (role == ExtrusionRole::BridgeInfill) return erBridgeInfill; + if (role == ExtrusionRole::GapFill) return erGapFill; + if (role == ExtrusionRole::Skirt) return erSkirt; + if (role == ExtrusionRole::SupportMaterial) return erSupportMaterial; + if (role == ExtrusionRole::SupportMaterialInterface) return erSupportMaterialInterface; + if (role == ExtrusionRole::WipeTower) return erWipeTower; + assert(false); + return erNone; +} -std::string ExtrusionEntity::role_to_string(ExtrusionRole role) +std::string gcode_extrusion_role_to_string(GCodeExtrusionRole role) { switch (role) { case erNone : return L("Unknown"); @@ -341,13 +362,12 @@ std::string ExtrusionEntity::role_to_string(ExtrusionRole role) case erSupportMaterialInterface : return L("Support material interface"); case erWipeTower : return L("Wipe tower"); case erCustom : return L("Custom"); - case erMixed : return L("Mixed"); default : assert(false); } - return ""; + return {}; } -ExtrusionRole ExtrusionEntity::string_to_role(const std::string_view role) +GCodeExtrusionRole string_to_gcode_extrusion_role(const std::string_view role) { if (role == L("Perimeter")) return erPerimeter; @@ -377,8 +397,6 @@ ExtrusionRole ExtrusionEntity::string_to_role(const std::string_view role) return erWipeTower; else if (role == L("Custom")) return erCustom; - else if (role == L("Mixed")) - return erMixed; else return erNone; } diff --git a/src/libslic3r/ExtrusionEntity.hpp b/src/libslic3r/ExtrusionEntity.hpp index 47c33938a..5022f216b 100644 --- a/src/libslic3r/ExtrusionEntity.hpp +++ b/src/libslic3r/ExtrusionEntity.hpp @@ -4,6 +4,7 @@ #include "libslic3r.h" #include "Polygon.hpp" #include "Polyline.hpp" +#include "enum_bitmask.hpp" #include #include @@ -16,8 +17,113 @@ using ExPolygons = std::vector; class ExtrusionEntityCollection; class Extruder; -// Each ExtrusionRole value identifies a distinct set of { extruder, speed } -enum ExtrusionRole : uint8_t { +enum class ExtrusionRoleModifier : uint16_t { +// 1) Extrusion types + // Perimeter (external, inner, ...) + Perimeter, + // Infill (top / bottom / solid inner / sparse inner / bridging inner ...) + Infill, + // Variable width extrusion + Thin, + // Support material extrusion + Support, + Skirt, + Wipe, +// 2) Extrusion modifiers + External, + Solid, + Ironing, + Bridge, +// 3) Special types + // Indicator that the extrusion role was mixed from multiple differing extrusion roles, + // for example from Support and SupportInterface. + Mixed, + // Stopper, there should be maximum 16 modifiers defined for uint16_t bit mask. + Count +}; +// There should be maximum 16 modifiers defined for uint16_t bit mask. +static_assert(int(ExtrusionRoleModifier::Count) <= 16, "ExtrusionRoleModifier: there must be maximum 16 modifiers defined to fit a 16 bit bitmask"); + +using ExtrusionRoleModifiers = enum_bitmask; +ENABLE_ENUM_BITMASK_OPERATORS(ExtrusionRoleModifier); + +struct ExtrusionRole : public ExtrusionRoleModifiers +{ + constexpr ExtrusionRole(const ExtrusionRoleModifier bit) : ExtrusionRoleModifiers(bit) {} + constexpr ExtrusionRole(const ExtrusionRoleModifiers bits) : ExtrusionRoleModifiers(bits) {} + + static constexpr const ExtrusionRoleModifiers None{}; + // Internal perimeter, not bridging. + static constexpr const ExtrusionRoleModifiers Perimeter{ ExtrusionRoleModifier::Perimeter }; + // External perimeter, not bridging. + static constexpr const ExtrusionRoleModifiers ExternalPerimeter{ ExtrusionRoleModifier::Perimeter | ExtrusionRoleModifier::External }; + // Perimeter, bridging. To be or'ed with ExtrusionRoleModifier::External for external bridging perimeter. + static constexpr const ExtrusionRoleModifiers OverhangPerimeter{ ExtrusionRoleModifier::Perimeter | ExtrusionRoleModifier::Bridge }; + // Sparse internal infill. + static constexpr const ExtrusionRoleModifiers InternalInfill{ ExtrusionRoleModifier::Infill }; + // Solid internal infill. + static constexpr const ExtrusionRoleModifiers SolidInfill{ ExtrusionRoleModifier::Infill | ExtrusionRoleModifier::Solid }; + // Top solid infill (visible). + //FIXME why there is no bottom solid infill type? + static constexpr const ExtrusionRoleModifiers TopSolidInfill{ ExtrusionRoleModifier::Infill | ExtrusionRoleModifier::Solid | ExtrusionRoleModifier::External }; + // Ironing infill at the top surfaces. + static constexpr const ExtrusionRoleModifiers Ironing{ ExtrusionRoleModifier::Infill | ExtrusionRoleModifier::Ironing | ExtrusionRoleModifier::External }; + // Visible bridging infill at the bottom of an object. + static constexpr const ExtrusionRoleModifiers BridgeInfill{ ExtrusionRoleModifier::Infill | ExtrusionRoleModifier::Solid | ExtrusionRoleModifier::Bridge | ExtrusionRoleModifier::External }; +// static constexpr const ExtrusionRoleModifiers InternalBridgeInfill{ ExtrusionRoleModifier::Infill | ExtrusionRoleModifier::Solid | ExtrusionRoleModifier::Bridge }; + // Gap fill extrusion, currently used for any variable width extrusion: Thin walls outside of the outer extrusion, + // gap fill in between perimeters, gap fill between the inner perimeter and infill. + //FIXME revise GapFill and ThinWall types, split Gap Fill to Gap Fill and ThinWall. + static constexpr const ExtrusionRoleModifiers GapFill{ ExtrusionRoleModifier::Thin }; // | ExtrusionRoleModifier::External }; +// static constexpr const ExtrusionRoleModifiers ThinWall{ ExtrusionRoleModifier::Thin }; + static constexpr const ExtrusionRoleModifiers Skirt{ ExtrusionRoleModifier::Skirt }; + // Support base material, printed with non-soluble plastic. + static constexpr const ExtrusionRoleModifiers SupportMaterial{ ExtrusionRoleModifier::Support }; + // Support interface material, printed with soluble plastic. + static constexpr const ExtrusionRoleModifiers SupportMaterialInterface{ ExtrusionRoleModifier::Support | ExtrusionRoleModifier::External }; + // Wipe tower material. + static constexpr const ExtrusionRoleModifiers WipeTower{ ExtrusionRoleModifier::Wipe }; + // Extrusion role for a collection with multiple extrusion roles. + static constexpr const ExtrusionRoleModifiers Mixed{ ExtrusionRoleModifier::Mixed }; +}; + +// Special flags describing loop +enum ExtrusionLoopRole { + elrDefault, + elrContourInternalPerimeter, + elrSkirt, +}; + +inline bool is_perimeter(ExtrusionRole role) +{ + return role == ExtrusionRole::Perimeter + || role == ExtrusionRole::ExternalPerimeter + || role == ExtrusionRole::OverhangPerimeter; +} + +inline bool is_infill(ExtrusionRole role) +{ + return role == ExtrusionRole::BridgeInfill + || role == ExtrusionRole::InternalInfill + || role == ExtrusionRole::SolidInfill + || role == ExtrusionRole::TopSolidInfill + || role == ExtrusionRole::Ironing; +} + +inline bool is_solid_infill(ExtrusionRole role) +{ + return role == ExtrusionRole::BridgeInfill + || role == ExtrusionRole::SolidInfill + || role == ExtrusionRole::TopSolidInfill + || role == ExtrusionRole::Ironing; +} + +inline bool is_bridge(ExtrusionRole role) { + return role == ExtrusionRole::BridgeInfill + || role == ExtrusionRole::OverhangPerimeter; +} + +enum GCodeExtrusionRole : uint8_t { erNone, erPerimeter, erExternalPerimeter, @@ -32,49 +138,12 @@ enum ExtrusionRole : uint8_t { erSupportMaterial, erSupportMaterialInterface, erWipeTower, + // Custom (user defined) G-code block, for example start / end G-code. erCustom, - // Extrusion role for a collection with multiple extrusion roles. - erMixed, + // Stopper to count number of enums. erCount }; -// Special flags describing loop -enum ExtrusionLoopRole { - elrDefault, - elrContourInternalPerimeter, - elrSkirt, -}; - - -inline bool is_perimeter(ExtrusionRole role) -{ - return role == erPerimeter - || role == erExternalPerimeter - || role == erOverhangPerimeter; -} - -inline bool is_infill(ExtrusionRole role) -{ - return role == erBridgeInfill - || role == erInternalInfill - || role == erSolidInfill - || role == erTopSolidInfill - || role == erIroning; -} - -inline bool is_solid_infill(ExtrusionRole role) -{ - return role == erBridgeInfill - || role == erSolidInfill - || role == erTopSolidInfill - || role == erIroning; -} - -inline bool is_bridge(ExtrusionRole role) { - return role == erBridgeInfill - || role == erOverhangPerimeter; -} - class ExtrusionEntity { public: @@ -108,11 +177,15 @@ public: virtual Polylines as_polylines() const { Polylines dst; this->collect_polylines(dst); return dst; } virtual double length() const = 0; virtual double total_volume() const = 0; - - static std::string role_to_string(ExtrusionRole role); - static ExtrusionRole string_to_role(const std::string_view role); }; +// Convert a rich bitmask based ExtrusionRole to a less expressive ordinal GCodeExtrusionRole. +// GCodeExtrusionRole is to be serialized into G-code and deserialized by G-code viewer, +GCodeExtrusionRole extrusion_role_to_gcode_extrusion_role(ExtrusionRole role); + +std::string gcode_extrusion_role_to_string(GCodeExtrusionRole role); +GCodeExtrusionRole string_to_gcode_extrusion_role(const std::string_view role); + typedef std::vector ExtrusionEntitiesPtr; class ExtrusionPath : public ExtrusionEntity @@ -217,7 +290,7 @@ public: size_t size() const { return this->paths.size(); } bool empty() const { return this->paths.empty(); } double length() const override; - ExtrusionRole role() const override { return this->paths.empty() ? erNone : this->paths.front().role(); } + ExtrusionRole role() const override { return this->paths.empty() ? ExtrusionRole::None : this->paths.front().role(); } // Produce a list of 2D polygons covered by the extruded paths, offsetted by the extrusion width. // Increase the offset by scaled_epsilon to achieve an overlap, so a union will produce no gaps. void polygons_covered_by_width(Polygons &out, const float scaled_epsilon) const override; @@ -279,7 +352,7 @@ public: // Test, whether the point is extruded by a bridging flow. // This used to be used to avoid placing seams on overhangs, but now the EdgeGrid is used instead. bool has_overhang_point(const Point &point) const; - ExtrusionRole role() const override { return this->paths.empty() ? erNone : this->paths.front().role(); } + ExtrusionRole role() const override { return this->paths.empty() ? ExtrusionRole::None : this->paths.front().role(); } ExtrusionLoopRole loop_role() const { return m_loop_role; } // Produce a list of 2D polygons covered by the extruded paths, offsetted by the extrusion width. // Increase the offset by scaled_epsilon to achieve an overlap, so a union will produce no gaps. @@ -304,8 +377,6 @@ public: } double total_volume() const override { double volume =0.; for (const auto& path : paths) volume += path.total_volume(); return volume; } - //static inline std::string role_to_string(ExtrusionLoopRole role); - #ifndef NDEBUG bool validate() const { assert(this->first_point() == this->paths.back().polyline.points.back()); diff --git a/src/libslic3r/ExtrusionEntityCollection.cpp b/src/libslic3r/ExtrusionEntityCollection.cpp index e6ae1edd4..55167861c 100644 --- a/src/libslic3r/ExtrusionEntityCollection.cpp +++ b/src/libslic3r/ExtrusionEntityCollection.cpp @@ -8,7 +8,7 @@ namespace Slic3r { void filter_by_extrusion_role_in_place(ExtrusionEntitiesPtr &extrusion_entities, ExtrusionRole role) { - if (role != erMixed) { + if (role != ExtrusionRole::Mixed) { auto first = extrusion_entities.begin(); auto last = extrusion_entities.end(); extrusion_entities.erase( diff --git a/src/libslic3r/ExtrusionEntityCollection.hpp b/src/libslic3r/ExtrusionEntityCollection.hpp index cabf4e2f9..0c029a1d5 100644 --- a/src/libslic3r/ExtrusionEntityCollection.hpp +++ b/src/libslic3r/ExtrusionEntityCollection.hpp @@ -54,10 +54,10 @@ public: bool is_collection() const override { return true; } ExtrusionRole role() const override { - ExtrusionRole out = erNone; + ExtrusionRole out{ ExtrusionRole::None }; for (const ExtrusionEntity *ee : entities) { ExtrusionRole er = ee->role(); - out = (out == erNone || out == er) ? er : erMixed; + out = (out == ExtrusionRole::None || out == er) ? er : ExtrusionRole::Mixed; } return out; } @@ -96,8 +96,8 @@ public: } void replace(size_t i, const ExtrusionEntity &entity); void remove(size_t i); - static ExtrusionEntityCollection chained_path_from(const ExtrusionEntitiesPtr &extrusion_entities, const Point &start_near, ExtrusionRole role = erMixed); - ExtrusionEntityCollection chained_path_from(const Point &start_near, ExtrusionRole role = erMixed) const + static ExtrusionEntityCollection chained_path_from(const ExtrusionEntitiesPtr &extrusion_entities, const Point &start_near, ExtrusionRole role = ExtrusionRole::Mixed); + ExtrusionEntityCollection chained_path_from(const Point &start_near, ExtrusionRole role = ExtrusionRole::Mixed) const { return this->no_sort ? *this : chained_path_from(this->entities, start_near, role); } void reverse() override; const Point& first_point() const override { return this->entities.front()->first_point(); } diff --git a/src/libslic3r/Fill/Fill.cpp b/src/libslic3r/Fill/Fill.cpp index c962bbeb0..01c551fb6 100644 --- a/src/libslic3r/Fill/Fill.cpp +++ b/src/libslic3r/Fill/Fill.cpp @@ -52,7 +52,7 @@ struct SurfaceFillParams Flow flow; // For the output - ExtrusionRole extrusion_role = ExtrusionRole(0); + ExtrusionRole extrusion_role{ ExtrusionRole::None }; // Various print settings? @@ -81,8 +81,7 @@ struct SurfaceFillParams RETURN_COMPARE_NON_EQUAL(flow.height()); RETURN_COMPARE_NON_EQUAL(flow.nozzle_diameter()); RETURN_COMPARE_NON_EQUAL_TYPED(unsigned, bridge); - RETURN_COMPARE_NON_EQUAL_TYPED(unsigned, extrusion_role); - return false; + return this->extrusion_role.lower(rhs.extrusion_role); } bool operator==(const SurfaceFillParams &rhs) const { @@ -145,10 +144,10 @@ std::vector group_fills(const Layer &layer) params.extrusion_role = is_bridge ? - erBridgeInfill : + ExtrusionRole::BridgeInfill : (surface.is_solid() ? - (surface.is_top() ? erTopSolidInfill : erSolidInfill) : - erInternalInfill); + (surface.is_top() ? ExtrusionRole::TopSolidInfill : ExtrusionRole::SolidInfill) : + ExtrusionRole::InternalInfill); params.bridge_angle = float(surface.bridge_angle); params.angle = float(Geometry::deg2rad(region_config.fill_angle.value)); @@ -282,7 +281,7 @@ std::vector group_fills(const Layer &layer) params.extruder = layerm.region().extruder(frSolidInfill); params.pattern = layerm.region().config().top_fill_pattern == ipMonotonic ? ipMonotonic : ipRectilinear; params.density = 100.f; - params.extrusion_role = erInternalInfill; + params.extrusion_role = ExtrusionRole::InternalInfill; params.angle = float(Geometry::deg2rad(layerm.region().config().fill_angle.value)); // calculate the actual flow we'll be using for this infill params.flow = layerm.flow(frSolidInfill); @@ -785,7 +784,7 @@ void Layer::make_ironing() eec->no_sort = true; extrusion_entities_append_paths( eec->entities, std::move(polylines), - erIroning, + ExtrusionRole::Ironing, flow_mm3_per_mm, extrusion_width, float(extrusion_height)); insert_fills_into_islands(*this, ironing_params.region_id, fill_begin, uint32_t(ironing_params.layerm->fills().size())); } diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp index 1e152c35a..6ed0b9024 100644 --- a/src/libslic3r/GCode.cpp +++ b/src/libslic3r/GCode.cpp @@ -148,7 +148,7 @@ namespace Slic3r { int OozePrevention::_get_temp(GCode& gcodegen) { - return (gcodegen.layer() != NULL && gcodegen.layer()->id() == 0) + return (gcodegen.layer() != nullptr && gcodegen.layer()->id() == 0) ? gcodegen.config().first_layer_temperature.get_at(gcodegen.writer().extruder()->id()) : gcodegen.config().temperature.get_at(gcodegen.writer().extruder()->id()); } @@ -244,7 +244,7 @@ namespace Slic3r { gcodegen.m_avoid_crossing_perimeters.use_external_mp_once(); gcode += gcodegen.travel_to( wipe_tower_point_to_object_point(gcodegen, start_pos), - erMixed, + ExtrusionRole::Mixed, "Travel to a Wipe Tower"); gcode += gcodegen.unretract(); } @@ -864,7 +864,7 @@ namespace DoExport { auto min_mm3_per_mm_no_ironing = [](const ExtrusionEntityCollection& eec) -> double { double min = std::numeric_limits::max(); for (const ExtrusionEntity* ee : eec.entities) - if (ee->role() != erIroning) + if (ee->role() != ExtrusionRole::Ironing) min = std::min(min, ee->min_mm3_per_mm()); return min; }; @@ -1271,7 +1271,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato this->_print_first_layer_extruder_temperatures(file, print, start_gcode, initial_extruder_id, false); // adds tag for processor - file.write_format(";%s%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role).c_str(), ExtrusionEntity::role_to_string(erCustom).c_str()); + file.write_format(";%s%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role).c_str(), gcode_extrusion_role_to_string(erCustom).c_str()); // Write the custom start G-code file.writeln(start_gcode); @@ -1320,7 +1320,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato m_enable_cooling_markers = false; // we're not filtering these moves through CoolingBuffer m_avoid_crossing_perimeters.use_external_mp_once(); file.write(this->retract()); - file.write(this->travel_to(Point(0, 0), erNone, "move to origin position for next object")); + file.write(this->travel_to(Point(0, 0), ExtrusionRole::None, "move to origin position for next object")); m_enable_cooling_markers = true; // Disable motion planner when traveling to first object point. m_avoid_crossing_perimeters.disable_once(); @@ -1407,7 +1407,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato file.write(m_writer.set_fan(0)); // adds tag for processor - file.write_format(";%s%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role).c_str(), ExtrusionEntity::role_to_string(erCustom).c_str()); + file.write_format(";%s%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role).c_str(), gcode_extrusion_role_to_string(erCustom).c_str()); // Process filament-specific gcode in extruder order. { @@ -2305,8 +2305,8 @@ void GCode::process_layer_single_object( if (! print_wipe_extrusions && layer_to_print.support_layer != nullptr) if (const SupportLayer &support_layer = *layer_to_print.support_layer; ! support_layer.support_fills.entities.empty()) { ExtrusionRole role = support_layer.support_fills.role(); - bool has_support = role == erMixed || role == erSupportMaterial; - bool has_interface = role == erMixed || role == erSupportMaterialInterface; + bool has_support = role == ExtrusionRole::Mixed || role == ExtrusionRole::SupportMaterial; + bool has_interface = role == ExtrusionRole::Mixed || role == ExtrusionRole::SupportMaterialInterface; // Extruder ID of the support base. -1 if "don't care". unsigned int support_extruder = print_object.config().support_material_extruder.value - 1; // Shall the support be printed with the active extruder, preferably with non-soluble, to avoid tool changes? @@ -2340,8 +2340,8 @@ void GCode::process_layer_single_object( m_layer = layer_to_print.support_layer; m_object_layer_over_raft = false; gcode += this->extrude_support( - // support_extrusion_role is erSupportMaterial, erSupportMaterialInterface or erMixed for all extrusion paths. - support_layer.support_fills.chained_path_from(m_last_pos, has_support ? (has_interface ? erMixed : erSupportMaterial) : erSupportMaterialInterface)); + // support_extrusion_role is ExtrusionRole::SupportMaterial, ExtrusionRole::SupportMaterialInterface or ExtrusionRole::Mixed for all extrusion paths. + support_layer.support_fills.chained_path_from(m_last_pos, has_support ? (has_interface ? ExtrusionRole::Mixed : ExtrusionRole::SupportMaterial) : ExtrusionRole::SupportMaterialInterface)); } } @@ -2385,7 +2385,7 @@ void GCode::process_layer_single_object( for (uint32_t fill_id : *it_fill_range) { assert(dynamic_cast(fills.entities[fill_id])); if (auto *eec = static_cast(fills.entities[fill_id]); - (eec->role() == erIroning) == ironing && shall_print_this_extrusion_collection(eec, region)) { + (eec->role() == ExtrusionRole::Ironing) == ironing && shall_print_this_extrusion_collection(eec, region)) { if (eec->can_reverse()) // Flatten the infill collection for better path planning. for (auto *ee : eec->entities) @@ -2631,7 +2631,7 @@ std::string GCode::extrude_loop(ExtrusionLoop loop, const std::string_view descr } // make a little move inwards before leaving loop - if (paths.back().role() == erExternalPerimeter && m_layer != NULL && m_config.perimeters.value > 1 && paths.front().size() >= 2 && paths.back().polyline.points.size() >= 3) { + if (paths.back().role() == ExtrusionRole::ExternalPerimeter && m_layer != NULL && m_config.perimeters.value > 1 && paths.front().size() >= 2 && paths.back().polyline.points.size() >= 3) { // detect angle between last and first segment // the side depends on the original winding order of the polygon (left for contours, right for holes) //FIXME improve the algorithm in case the loop is tiny. @@ -2739,9 +2739,9 @@ std::string GCode::extrude_support(const ExtrusionEntityCollection &support_fill const double support_interface_speed = m_config.support_material_interface_speed.get_abs_value(support_speed); for (const ExtrusionEntity *ee : support_fills.entities) { ExtrusionRole role = ee->role(); - assert(role == erSupportMaterial || role == erSupportMaterialInterface); - const auto label = (role == erSupportMaterial) ? support_label : support_interface_label; - const double speed = (role == erSupportMaterial) ? support_speed : support_interface_speed; + assert(role == ExtrusionRole::SupportMaterial || role == ExtrusionRole::SupportMaterialInterface); + const auto label = (role == ExtrusionRole::SupportMaterial) ? support_label : support_interface_label; + const double speed = (role == ExtrusionRole::SupportMaterial) ? support_speed : support_interface_speed; const ExtrusionPath *path = dynamic_cast(ee); if (path) gcode += this->extrude_path(*path, label, speed); @@ -2872,21 +2872,21 @@ std::string GCode::_extrude(const ExtrusionPath &path, const std::string_view de // set speed if (speed == -1) { - if (path.role() == erPerimeter) { + if (path.role() == ExtrusionRole::Perimeter) { speed = m_config.get_abs_value("perimeter_speed"); - } else if (path.role() == erExternalPerimeter) { + } else if (path.role() == ExtrusionRole::ExternalPerimeter) { speed = m_config.get_abs_value("external_perimeter_speed"); - } else if (path.role() == erOverhangPerimeter || path.role() == erBridgeInfill) { + } else if (path.role() == ExtrusionRole::OverhangPerimeter || path.role() == ExtrusionRole::BridgeInfill) { speed = m_config.get_abs_value("bridge_speed"); - } else if (path.role() == erInternalInfill) { + } else if (path.role() == ExtrusionRole::InternalInfill) { speed = m_config.get_abs_value("infill_speed"); - } else if (path.role() == erSolidInfill) { + } else if (path.role() == ExtrusionRole::SolidInfill) { speed = m_config.get_abs_value("solid_infill_speed"); - } else if (path.role() == erTopSolidInfill) { + } else if (path.role() == ExtrusionRole::TopSolidInfill) { speed = m_config.get_abs_value("top_solid_infill_speed"); - } else if (path.role() == erIroning) { + } else if (path.role() == ExtrusionRole::Ironing) { speed = m_config.get_abs_value("ironing_speed"); - } else if (path.role() == erGapFill) { + } else if (path.role() == ExtrusionRole::GapFill) { speed = m_config.get_abs_value("gap_fill_speed"); } else { throw Slic3r::InvalidArgument("Invalid speed"); @@ -2927,9 +2927,9 @@ std::string GCode::_extrude(const ExtrusionPath &path, const std::string_view de // extrude arc or line if (m_enable_extrusion_role_markers) { - if (path.role() != m_last_extrusion_role) + if (GCodeExtrusionRole role = extrusion_role_to_gcode_extrusion_role(path.role()); role != m_last_extrusion_role) { - m_last_extrusion_role = path.role(); + m_last_extrusion_role = role; if (m_enable_extrusion_role_markers) { char buf[32]; @@ -2945,10 +2945,10 @@ std::string GCode::_extrude(const ExtrusionPath &path, const std::string_view de bool last_was_wipe_tower = (m_last_processor_extrusion_role == erWipeTower); assert(is_decimal_separator_point()); - if (path.role() != m_last_processor_extrusion_role) { - m_last_processor_extrusion_role = path.role(); + if (GCodeExtrusionRole role = extrusion_role_to_gcode_extrusion_role(path.role()); role != m_last_processor_extrusion_role) { + m_last_processor_extrusion_role = role; char buf[64]; - sprintf(buf, ";%s%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role).c_str(), ExtrusionEntity::role_to_string(m_last_processor_extrusion_role).c_str()); + sprintf(buf, ";%s%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role).c_str(), gcode_extrusion_role_to_string(m_last_processor_extrusion_role).c_str()); gcode += buf; } @@ -2979,7 +2979,7 @@ std::string GCode::_extrude(const ExtrusionPath &path, const std::string_view de gcode += ";_BRIDGE_FAN_START\n"; else comment = ";_EXTRUDE_SET_SPEED"; - if (path.role() == erExternalPerimeter) + if (path.role() == ExtrusionRole::ExternalPerimeter) comment += ";_EXTERNAL_PERIMETER"; } @@ -3112,7 +3112,7 @@ bool GCode::needs_retraction(const Polyline &travel, ExtrusionRole role) return false; } - if (role == erSupportMaterial) + if (role == ExtrusionRole::SupportMaterial) if (const SupportLayer *support_layer = dynamic_cast(m_layer); support_layer != nullptr && ! support_layer->support_islands_bboxes.empty()) { BoundingBox bbox_travel = get_extents(travel); diff --git a/src/libslic3r/GCode.hpp b/src/libslic3r/GCode.hpp index 09442cf0f..d57116595 100644 --- a/src/libslic3r/GCode.hpp +++ b/src/libslic3r/GCode.hpp @@ -326,7 +326,7 @@ private: std::string extrude_support(const ExtrusionEntityCollection &support_fills); std::string travel_to(const Point &point, ExtrusionRole role, std::string comment); - bool needs_retraction(const Polyline &travel, ExtrusionRole role = erNone); + bool needs_retraction(const Polyline &travel, ExtrusionRole role = ExtrusionRole::None); std::string retract(bool toolchange = false); std::string unretract() { return m_writer.unlift() + m_writer.unretract(); } std::string set_extruder(unsigned int extruder_id, double print_z); @@ -363,7 +363,7 @@ private: // The Pressure Equalizer removes the markers from the final G-code. bool m_enable_extrusion_role_markers; // Keeps track of the last extrusion role passed to the processor - ExtrusionRole m_last_processor_extrusion_role; + GCodeExtrusionRole m_last_processor_extrusion_role; // How many times will change_layer() be called? // change_layer() will update the progress bar. unsigned int m_layer_count; @@ -376,7 +376,7 @@ private: bool m_object_layer_over_raft; double m_volumetric_speed; // Support for the extrusion role markers. Which marker is active? - ExtrusionRole m_last_extrusion_role; + GCodeExtrusionRole m_last_extrusion_role; // Support for G-Code Processor float m_last_height{ 0.0f }; float m_last_layer_z{ 0.0f }; diff --git a/src/libslic3r/GCode/GCodeProcessor.cpp b/src/libslic3r/GCode/GCodeProcessor.cpp index 0fde8c5ad..3e61e7fec 100644 --- a/src/libslic3r/GCode/GCodeProcessor.cpp +++ b/src/libslic3r/GCode/GCodeProcessor.cpp @@ -415,7 +415,7 @@ void GCodeProcessor::UsedFilaments::process_role_cache(const GCodeProcessor* pro filament.first = role_cache / s * 0.001; filament.second = role_cache * processor->m_result.filament_densities[processor->m_extruder_id] * 0.001; - ExtrusionRole active_role = processor->m_extrusion_role; + GCodeExtrusionRole active_role = processor->m_extrusion_role; if (filaments_per_role.find(active_role) != filaments_per_role.end()) { filaments_per_role[active_role].first += filament.first; filaments_per_role[active_role].second += filament.second; @@ -1170,14 +1170,14 @@ std::vector> GCodeProcessor::get_moves_time(PrintEst return ret; } -std::vector> GCodeProcessor::get_roles_time(PrintEstimatedStatistics::ETimeMode mode) const +std::vector> GCodeProcessor::get_roles_time(PrintEstimatedStatistics::ETimeMode mode) const { - std::vector> ret; + std::vector> ret; if (mode < PrintEstimatedStatistics::ETimeMode::Count) { for (size_t i = 0; i < m_time_processor.machines[static_cast(mode)].roles_time.size(); ++i) { float time = m_time_processor.machines[static_cast(mode)].roles_time[i]; if (time > 0.0f) - ret.push_back({ static_cast(i), time }); + ret.push_back({ static_cast(i), time }); } } return ret; @@ -1645,7 +1645,7 @@ void GCodeProcessor::process_tags(const std::string_view comment, bool producers // extrusion role tag if (boost::starts_with(comment, reserved_tag(ETags::Role))) { - set_extrusion_role(ExtrusionEntity::string_to_role(comment.substr(reserved_tag(ETags::Role).length()))); + set_extrusion_role(string_to_gcode_extrusion_role(comment.substr(reserved_tag(ETags::Role).length()))); if (m_extrusion_role == erExternalPerimeter) m_seams_detector.activate(true); return; @@ -3771,7 +3771,7 @@ void GCodeProcessor::store_move_vertex(EMoveType type, bool internal_only) } } -void GCodeProcessor::set_extrusion_role(ExtrusionRole role) +void GCodeProcessor::set_extrusion_role(GCodeExtrusionRole role) { m_used_filaments.process_role_cache(this); m_extrusion_role = role; diff --git a/src/libslic3r/GCode/GCodeProcessor.hpp b/src/libslic3r/GCode/GCodeProcessor.hpp index 3baff69aa..a3841343b 100644 --- a/src/libslic3r/GCode/GCodeProcessor.hpp +++ b/src/libslic3r/GCode/GCodeProcessor.hpp @@ -47,7 +47,7 @@ namespace Slic3r { float travel_time; std::vector>> custom_gcode_times; std::vector> moves_times; - std::vector> roles_times; + std::vector> roles_times; std::vector layers_times; void reset() { @@ -62,7 +62,7 @@ namespace Slic3r { std::vector volumes_per_color_change; std::map volumes_per_extruder; - std::map> used_filaments_per_role; + std::map> used_filaments_per_role; std::map cost_per_extruder; std::array(ETimeMode::Count)> modes; @@ -99,7 +99,7 @@ namespace Slic3r { { unsigned int gcode_id{ 0 }; EMoveType type{ EMoveType::Noop }; - ExtrusionRole extrusion_role{ erNone }; + GCodeExtrusionRole extrusion_role{ erNone }; unsigned char extruder_id{ 0 }; unsigned char cp_color_id{ 0 }; Vec3f position{ Vec3f::Zero() }; // mm @@ -238,7 +238,7 @@ namespace Slic3r { }; EMoveType move_type{ EMoveType::Noop }; - ExtrusionRole role{ erNone }; + GCodeExtrusionRole role{ erNone }; unsigned int g1_line_id{ 0 }; unsigned int layer_id{ 0 }; float distance{ 0.0f }; // mm @@ -310,7 +310,7 @@ namespace Slic3r { std::vector blocks; std::vector g1_times_cache; std::array(EMoveType::Count)> moves_time; - std::array(ExtrusionRole::erCount)> roles_time; + std::array(GCodeExtrusionRole::erCount)> roles_time; std::vector layers_time; void reset(); @@ -360,7 +360,7 @@ namespace Slic3r { std::map volumes_per_extruder; double role_cache; - std::map> filaments_per_role; // ExtrusionRole -> (m, g) + std::map> filaments_per_role; // ExtrusionRole -> (m, g) void reset(); @@ -441,7 +441,7 @@ namespace Slic3r { { float value; float tag_value; - ExtrusionRole role; + GCodeExtrusionRole role; }; std::string type; @@ -454,7 +454,7 @@ namespace Slic3r { : type(type), threshold(threshold) {} - void update(float value, ExtrusionRole role) { + void update(float value, GCodeExtrusionRole role) { if (role != erCustom) { ++count; if (last_tag_value != 0.0f) { @@ -539,7 +539,7 @@ namespace Slic3r { float m_mm3_per_mm; float m_fan_speed; // percentage float m_z_offset; // mm - ExtrusionRole m_extrusion_role; + GCodeExtrusionRole m_extrusion_role; unsigned char m_extruder_id; ExtruderColors m_extruder_colors; ExtruderTemps m_extruder_temps; @@ -620,7 +620,7 @@ namespace Slic3r { std::vector>> get_custom_gcode_times(PrintEstimatedStatistics::ETimeMode mode, bool include_remaining) const; std::vector> get_moves_time(PrintEstimatedStatistics::ETimeMode mode) const; - std::vector> get_roles_time(PrintEstimatedStatistics::ETimeMode mode) const; + std::vector> get_roles_time(PrintEstimatedStatistics::ETimeMode mode) const; std::vector get_layers_time(PrintEstimatedStatistics::ETimeMode mode) const; private: @@ -757,7 +757,7 @@ namespace Slic3r { void store_move_vertex(EMoveType type, bool internal_only = false); - void set_extrusion_role(ExtrusionRole role); + void set_extrusion_role(GCodeExtrusionRole role); float minimum_feedrate(PrintEstimatedStatistics::ETimeMode mode, float feedrate) const; float minimum_travel_feedrate(PrintEstimatedStatistics::ETimeMode mode, float feedrate) const; diff --git a/src/libslic3r/GCode/PressureEqualizer.cpp b/src/libslic3r/GCode/PressureEqualizer.cpp index 399ab4272..52597517e 100644 --- a/src/libslic3r/GCode/PressureEqualizer.cpp +++ b/src/libslic3r/GCode/PressureEqualizer.cpp @@ -60,7 +60,7 @@ PressureEqualizer::PressureEqualizer(const Slic3r::GCodeConfig &config) : m_use_ } // Don't regulate the pressure before and after gap-fill and ironing. - for (const ExtrusionRole er : {erGapFill, erIroning}) { + for (const GCodeExtrusionRole er : {erGapFill, erIroning}) { m_max_volumetric_extrusion_rate_slopes[er].negative = 0; m_max_volumetric_extrusion_rate_slopes[er].positive = 0; } @@ -185,7 +185,7 @@ bool PressureEqualizer::process_line(const char *line, const char *line_end, GCo if (strncmp(line, EXTRUSION_ROLE_TAG.data(), EXTRUSION_ROLE_TAG.length()) == 0) { line += EXTRUSION_ROLE_TAG.length(); int role = atoi(line); - m_current_extrusion_role = ExtrusionRole(role); + m_current_extrusion_role = GCodeExtrusionRole(role); #ifdef PRESSURE_EQUALIZER_DEBUG ++line_idx; #endif @@ -542,7 +542,7 @@ void PressureEqualizer::adjust_volumetric_rate() for (size_t iRole = 1; iRole < erCount; ++ iRole) { const float &rate_slope = m_max_volumetric_extrusion_rate_slopes[iRole].negative; if (rate_slope == 0 || feedrate_per_extrusion_role[iRole] == std::numeric_limits::max()) - continue; // The negative rate is unlimited or the rate for ExtrusionRole iRole is unlimited. + continue; // The negative rate is unlimited or the rate for GCodeExtrusionRole iRole is unlimited. float rate_end = feedrate_per_extrusion_role[iRole]; if (iRole == line.extrusion_role && rate_succ < rate_end) @@ -600,7 +600,7 @@ void PressureEqualizer::adjust_volumetric_rate() for (size_t iRole = 1; iRole < erCount; ++ iRole) { const float &rate_slope = m_max_volumetric_extrusion_rate_slopes[iRole].positive; if (rate_slope == 0 || feedrate_per_extrusion_role[iRole] == std::numeric_limits::max()) - continue; // The positive rate is unlimited or the rate for ExtrusionRole iRole is unlimited. + continue; // The positive rate is unlimited or the rate for GCodeExtrusionRole iRole is unlimited. float rate_start = feedrate_per_extrusion_role[iRole]; if (!line.adjustable_flow || line.extrusion_role == erExternalPerimeter || line.extrusion_role == erGapFill || line.extrusion_role == erBridgeInfill || line.extrusion_role == erIroning) { diff --git a/src/libslic3r/GCode/PressureEqualizer.hpp b/src/libslic3r/GCode/PressureEqualizer.hpp index d6b7f2a4f..246a20568 100644 --- a/src/libslic3r/GCode/PressureEqualizer.hpp +++ b/src/libslic3r/GCode/PressureEqualizer.hpp @@ -77,7 +77,7 @@ private: // X,Y,Z,E,F float m_current_pos[5]; size_t m_current_extruder; - ExtrusionRole m_current_extrusion_role; + GCodeExtrusionRole m_current_extrusion_role; bool m_retracted; bool m_use_relative_e_distances; @@ -149,7 +149,7 @@ private: // Index of the active extruder. size_t extruder_id; // Extrusion role of this segment. - ExtrusionRole extrusion_role; + GCodeExtrusionRole extrusion_role; // Current volumetric extrusion rate. float volumetric_extrusion_rate; diff --git a/src/libslic3r/GCode/SeamPlacer.cpp b/src/libslic3r/GCode/SeamPlacer.cpp index 685855721..244a103ca 100644 --- a/src/libslic3r/GCode/SeamPlacer.cpp +++ b/src/libslic3r/GCode/SeamPlacer.cpp @@ -407,13 +407,13 @@ Polygons extract_perimeter_polygons(const Layer *layer, std::vectorrole(); if (perimeter->is_loop()) { for (const ExtrusionPath &path : static_cast(perimeter)->paths) { - if (path.role() == ExtrusionRole::erExternalPerimeter) { - role = ExtrusionRole::erExternalPerimeter; + if (path.role() == ExtrusionRole::ExternalPerimeter) { + role = ExtrusionRole::ExternalPerimeter; } } } - if (role == ExtrusionRole::erExternalPerimeter) { + if (role == ExtrusionRole::ExternalPerimeter) { Points p; perimeter->collect_points(p); polygons.emplace_back(std::move(p)); @@ -1548,7 +1548,7 @@ void SeamPlacer::place_seam(const Layer *layer, ExtrusionLoop &loop, bool extern Point seam_point = Point::new_scale(seam_position.x(), seam_position.y()); - if (loop.role() == ExtrusionRole::erPerimeter) { //Hopefully inner perimeter + if (loop.role() == ExtrusionRole::Perimeter) { //Hopefully inner perimeter const SeamCandidate &perimeter_point = layer_perimeters.points[seam_index]; ExtrusionLoop::ClosestPathPoint projected_point = loop.get_closest_path_and_point(seam_point, false); // determine depth of the seam point. diff --git a/src/libslic3r/GCode/ToolOrdering.cpp b/src/libslic3r/GCode/ToolOrdering.cpp index 5e14035d7..874a134b7 100644 --- a/src/libslic3r/GCode/ToolOrdering.cpp +++ b/src/libslic3r/GCode/ToolOrdering.cpp @@ -197,7 +197,7 @@ void ToolOrdering::initialize_layers(std::vector &zs) if (object.config().wipe_into_objects) return true; - if (!region.config().wipe_into_infill || eec.role() != erInternalInfill) + if (!region.config().wipe_into_infill || eec.role() != ExtrusionRole::InternalInfill) return false; return true; @@ -210,8 +210,8 @@ void ToolOrdering::collect_extruders(const PrintObject &object, const std::vecto for (auto support_layer : object.support_layers()) { LayerTools &layer_tools = this->tools_for_layer(support_layer->print_z); ExtrusionRole role = support_layer->support_fills.role(); - bool has_support = role == erMixed || role == erSupportMaterial; - bool has_interface = role == erMixed || role == erSupportMaterialInterface; + bool has_support = role == ExtrusionRole::Mixed || role == ExtrusionRole::SupportMaterial; + bool has_interface = role == ExtrusionRole::Mixed || role == ExtrusionRole::SupportMaterialInterface; unsigned int extruder_support = object.config().support_material_extruder.value; unsigned int extruder_interface = object.config().support_material_interface_extruder.value; if (has_support) @@ -266,10 +266,10 @@ void ToolOrdering::collect_extruders(const PrintObject &object, const std::vecto for (const ExtrusionEntity *ee : layerm->fills()) { // fill represents infill extrusions of a single island. const auto *fill = dynamic_cast(ee); - ExtrusionRole role = fill->entities.empty() ? erNone : fill->entities.front()->role(); + ExtrusionRole role = fill->entities.empty() ? ExtrusionRole::None : fill->entities.front()->role(); if (is_solid_infill(role)) has_solid_infill = true; - else if (role != erNone) + else if (role != ExtrusionRole::None) has_infill = true; if (m_print_config_ptr) { diff --git a/src/libslic3r/GCode/WipeTower.cpp b/src/libslic3r/GCode/WipeTower.cpp index db087a9ba..e83584218 100644 --- a/src/libslic3r/GCode/WipeTower.cpp +++ b/src/libslic3r/GCode/WipeTower.cpp @@ -37,7 +37,7 @@ public: // adds tag for analyzer: std::ostringstream str; str << ";" << GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Height) << m_layer_height << "\n"; // don't rely on GCodeAnalyzer knowing the layer height - it knows nothing at priming - str << ";" << GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role) << ExtrusionEntity::role_to_string(erWipeTower) << "\n"; + str << ";" << GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Role) << gcode_extrusion_role_to_string(erWipeTower) << "\n"; m_gcode += str.str(); change_analyzer_line_width(line_width); } diff --git a/src/libslic3r/PerimeterGenerator.cpp b/src/libslic3r/PerimeterGenerator.cpp index 15210b641..a9044367a 100644 --- a/src/libslic3r/PerimeterGenerator.cpp +++ b/src/libslic3r/PerimeterGenerator.cpp @@ -114,7 +114,7 @@ ExtrusionMultiPath PerimeterGenerator::thick_polyline_to_multi_path(const ThickP } const double w = fmax(line.a_width, line.b_width); - const Flow new_flow = (role == erOverhangPerimeter && flow.bridge()) ? flow : flow.with_width(unscale(w) + flow.height() * float(1. - 0.25 * PI)); + const Flow new_flow = (role == ExtrusionRole::OverhangPerimeter && flow.bridge()) ? flow : flow.with_width(unscale(w) + flow.height() * float(1. - 0.25 * PI)); if (path.polyline.points.empty()) { path.polyline.append(line.a); path.polyline.append(line.b); @@ -292,9 +292,9 @@ static ExtrusionEntityCollection traverse_loops_classic(const PerimeterGenerator for (const PerimeterGeneratorLoop &loop : loops) { bool is_external = loop.is_external(); - ExtrusionRole role; + ExtrusionRole role = ExtrusionRole::None; ExtrusionLoopRole loop_role; - role = is_external ? erExternalPerimeter : erPerimeter; + role = is_external ? ExtrusionRole::ExternalPerimeter : ExtrusionRole::Perimeter; if (loop.is_internal_contour()) { // Note that we set loop role to ContourInternalPerimeter // also when loop is both internal and external (i.e. @@ -332,7 +332,7 @@ static ExtrusionEntityCollection traverse_loops_classic(const PerimeterGenerator extrusion_paths_append( paths, diff_pl({ polygon }, lower_slices_polygons_clipped), - erOverhangPerimeter, + ExtrusionRole::OverhangPerimeter, params.mm3_per_mm_overhang, params.overhang_flow.width(), params.overhang_flow.height()); @@ -354,7 +354,7 @@ static ExtrusionEntityCollection traverse_loops_classic(const PerimeterGenerator // Append thin walls to the nearest-neighbor search (only for first iteration) if (! thin_walls.empty()) { - variable_width_classic(thin_walls, erExternalPerimeter, params.ext_perimeter_flow, coll.entities); + variable_width_classic(thin_walls, ExtrusionRole::ExternalPerimeter, params.ext_perimeter_flow, coll.entities); thin_walls.clear(); } @@ -503,7 +503,7 @@ static ExtrusionEntityCollection traverse_extrusions(const PerimeterGenerator::P continue; const bool is_external = extrusion->inset_idx == 0; - ExtrusionRole role = is_external ? erExternalPerimeter : erPerimeter; + ExtrusionRole role = is_external ? ExtrusionRole::ExternalPerimeter : ExtrusionRole::Perimeter; if (pg_extrusion.fuzzify) fuzzy_extrusion_line(*extrusion, scaled(params.config.fuzzy_skin_thickness.value), scaled(params.config.fuzzy_skin_point_dist.value)); @@ -547,7 +547,7 @@ static ExtrusionEntityCollection traverse_extrusions(const PerimeterGenerator::P // get overhang paths by checking what parts of this loop fall // outside the grown lower slices (thus where the distance between // the loop centerline and original lower slices is >= half nozzle diameter - extrusion_paths_append(paths, clip_extrusion(extrusion_path, lower_slices_paths, ClipperLib_Z::ctDifference), erOverhangPerimeter, + extrusion_paths_append(paths, clip_extrusion(extrusion_path, lower_slices_paths, ClipperLib_Z::ctDifference), ExtrusionRole::OverhangPerimeter, params.overhang_flow); // Reapply the nearest point search for starting point. @@ -568,7 +568,7 @@ static ExtrusionEntityCollection traverse_extrusions(const PerimeterGenerator::P for (const ExtrusionPath &path : paths) { ++point_occurrence[path.polyline.first_point()].occurrence; ++point_occurrence[path.polyline.last_point()].occurrence; - if (path.role() == erOverhangPerimeter) { + if (path.role() == ExtrusionRole::OverhangPerimeter) { point_occurrence[path.polyline.first_point()].is_overhang = true; point_occurrence[path.polyline.last_point()].is_overhang = true; } @@ -938,7 +938,7 @@ std::tuple, Polygons> generate_extra_perimeters_over Polygons shrinked = offset(prev, -0.4 * overhang_flow.scaled_spacing()); if (!shrinked.empty()) { overhang_region.emplace_back(); - extrusion_paths_append(overhang_region.back(), perimeter, erOverhangPerimeter, overhang_flow.mm3_per_mm(), + extrusion_paths_append(overhang_region.back(), perimeter, ExtrusionRole::OverhangPerimeter, overhang_flow.mm3_per_mm(), overhang_flow.width(), overhang_flow.height()); } @@ -953,13 +953,13 @@ std::tuple, Polygons> generate_extra_perimeters_over if (!fills.empty()) { fills = intersection_pl(fills, inset_overhang_area); overhang_region.emplace_back(); - extrusion_paths_append(overhang_region.back(), fills, erOverhangPerimeter, overhang_flow.mm3_per_mm(), + extrusion_paths_append(overhang_region.back(), fills, ExtrusionRole::OverhangPerimeter, overhang_flow.mm3_per_mm(), overhang_flow.width(), overhang_flow.height()); } break; } else { overhang_region.emplace_back(); - extrusion_paths_append(overhang_region.back(), perimeter, erOverhangPerimeter, overhang_flow.mm3_per_mm(), + extrusion_paths_append(overhang_region.back(), perimeter, ExtrusionRole::OverhangPerimeter, overhang_flow.mm3_per_mm(), overhang_flow.width(), overhang_flow.height()); } @@ -981,7 +981,7 @@ std::tuple, Polygons> generate_extra_perimeters_over } Polylines perimeter = intersection_pl(to_polylines(perimeter_polygon), shrinked_overhang_to_cover); overhang_region.emplace_back(); - extrusion_paths_append(overhang_region.back(), perimeter, erOverhangPerimeter, overhang_flow.mm3_per_mm(), + extrusion_paths_append(overhang_region.back(), perimeter, ExtrusionRole::OverhangPerimeter, overhang_flow.mm3_per_mm(), overhang_flow.width(), overhang_flow.height()); perimeter_polygon = expand(perimeter_polygon, 0.5 * overhang_flow.scaled_spacing()); @@ -1502,7 +1502,7 @@ void PerimeterGenerator::process_classic( ex.medial_axis(min, max, &polylines); if (! polylines.empty()) { ExtrusionEntityCollection gap_fill; - variable_width_classic(polylines, erGapFill, params.solid_infill_flow, gap_fill.entities); + variable_width_classic(polylines, ExtrusionRole::GapFill, params.solid_infill_flow, gap_fill.entities); /* Make sure we don't infill narrow parts that are already gap-filled (we only consider this surface's gaps to reduce the diff() complexity). Growing actual extrusions ensures that gaps not filled by medial axis diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp index 79fee4672..e7305234f 100644 --- a/src/libslic3r/Print.cpp +++ b/src/libslic3r/Print.cpp @@ -1029,7 +1029,7 @@ void Print::_make_skirt() ExtrusionLoop eloop(elrSkirt); eloop.paths.emplace_back(ExtrusionPath( ExtrusionPath( - erSkirt, + ExtrusionRole::Skirt, (float)mm3_per_mm, // this will be overridden at G-code export time flow.width(), (float)first_layer_height // this will be overridden at G-code export time diff --git a/src/libslic3r/SupportMaterial.cpp b/src/libslic3r/SupportMaterial.cpp index 9965c499f..331fc6c78 100644 --- a/src/libslic3r/SupportMaterial.cpp +++ b/src/libslic3r/SupportMaterial.cpp @@ -1178,7 +1178,7 @@ namespace SupportMaterialInternal { static inline bool has_bridging_perimeters(const ExtrusionLoop &loop) { for (const ExtrusionPath &ep : loop.paths) - if (ep.role() == erOverhangPerimeter && ! ep.polyline.empty()) + if (ep.role() == ExtrusionRole::OverhangPerimeter && ! ep.polyline.empty()) return int(ep.size()) >= (ep.is_closed() ? 3 : 2); return false; } @@ -1204,7 +1204,7 @@ namespace SupportMaterialInternal { for (const ExtrusionEntity *ee2 : static_cast(ee)->entities) { assert(! ee2->is_collection()); assert(! ee2->is_loop()); - if (ee2->role() == erBridgeInfill) + if (ee2->role() == ExtrusionRole::BridgeInfill) return true; } } @@ -1225,7 +1225,7 @@ namespace SupportMaterialInternal { { assert(expansion_scaled >= 0.f); for (const ExtrusionPath &ep : loop.paths) - if (ep.role() == erOverhangPerimeter && ! ep.polyline.empty()) { + if (ep.role() == ExtrusionRole::OverhangPerimeter && ! ep.polyline.empty()) { float exp = 0.5f * (float)scale_(ep.width) + expansion_scaled; if (ep.is_closed()) { if (ep.size() >= 3) { @@ -3357,7 +3357,7 @@ static inline void tree_supports_generate_paths( ExPolygons level2 = offset2_ex({ expoly }, -1.5 * flow.scaled_width(), 0.5 * flow.scaled_width()); if (level2.size() == 1) { Polylines polylines; - extrusion_entities_append_paths(dst, draw_perimeters(expoly, clip_length), erSupportMaterial, flow.mm3_per_mm(), flow.width(), flow.height(), + extrusion_entities_append_paths(dst, draw_perimeters(expoly, clip_length), ExtrusionRole::SupportMaterial, flow.mm3_per_mm(), flow.width(), flow.height(), // Disable reversal of the path, always start with the anchor, always print CCW. false); expoly = level2.front(); @@ -3460,7 +3460,7 @@ static inline void tree_supports_generate_paths( pl.reverse(); polylines.emplace_back(std::move(pl)); } - extrusion_entities_append_paths(dst, polylines, erSupportMaterial, flow.mm3_per_mm(), flow.width(), flow.height(), + extrusion_entities_append_paths(dst, polylines, ExtrusionRole::SupportMaterial, flow.mm3_per_mm(), flow.width(), flow.height(), // Disable reversal of the path, always start with the anchor, always print CCW. false); } @@ -3505,7 +3505,7 @@ static inline void fill_expolygons_with_sheath_generate_paths( eec->no_sort = true; } ExtrusionEntitiesPtr &out = no_sort ? eec->entities : dst; - extrusion_entities_append_paths(out, draw_perimeters(expoly, clip_length), erSupportMaterial, flow.mm3_per_mm(), flow.width(), flow.height()); + extrusion_entities_append_paths(out, draw_perimeters(expoly, clip_length), ExtrusionRole::SupportMaterial, flow.mm3_per_mm(), flow.width(), flow.height()); // Fill in the rest. fill_expolygons_generate_paths(out, offset_ex(expoly, float(-0.4 * spacing)), filler, fill_params, density, role, flow); if (no_sort && ! eec->empty()) @@ -3817,7 +3817,7 @@ void LoopInterfaceProcessor::generate(SupportGeneratorLayerExtruded &top_contact extrusion_entities_append_paths( top_contact_layer.extrusions, std::move(loop_lines), - erSupportMaterialInterface, flow.mm3_per_mm(), flow.width(), flow.height()); + ExtrusionRole::SupportMaterialInterface, flow.mm3_per_mm(), flow.width(), flow.height()); } #ifdef SLIC3R_DEBUG @@ -4252,7 +4252,7 @@ void generate_support_toolpaths( // Filler and its parameters filler, float(support_params.support_density), // Extrusion parameters - erSupportMaterial, flow, + ExtrusionRole::SupportMaterial, flow, support_params.with_sheath, false); } } @@ -4284,7 +4284,7 @@ void generate_support_toolpaths( // Filler and its parameters filler, density, // Extrusion parameters - (support_layer_id < slicing_params.base_raft_layers) ? erSupportMaterial : erSupportMaterialInterface, flow, + (support_layer_id < slicing_params.base_raft_layers) ? ExtrusionRole::SupportMaterial : ExtrusionRole::SupportMaterialInterface, flow, // sheath at first layer support_layer_id == 0, support_layer_id == 0); } @@ -4440,7 +4440,7 @@ void generate_support_toolpaths( // Filler and its parameters filler_interface.get(), float(density), // Extrusion parameters - erSupportMaterialInterface, interface_flow); + ExtrusionRole::SupportMaterialInterface, interface_flow); } // Base interface layers under soluble interfaces @@ -4462,7 +4462,7 @@ void generate_support_toolpaths( // Filler and its parameters filler, float(support_params.interface_density), // Extrusion parameters - erSupportMaterial, interface_flow); + ExtrusionRole::SupportMaterial, interface_flow); } // Base support or flange. @@ -4500,7 +4500,7 @@ void generate_support_toolpaths( // Filler and its parameters filler, density, // Extrusion parameters - erSupportMaterial, flow, + ExtrusionRole::SupportMaterial, flow, sheath, no_sort); } diff --git a/src/libslic3r/SupportSpotsGenerator.cpp b/src/libslic3r/SupportSpotsGenerator.cpp index 68a8a4011..4800a2210 100644 --- a/src/libslic3r/SupportSpotsGenerator.cpp +++ b/src/libslic3r/SupportSpotsGenerator.cpp @@ -58,7 +58,7 @@ public: bool is_external_perimeter() const { assert(origin_entity != nullptr); - return origin_entity->role() == erExternalPerimeter || origin_entity->role() == erOverhangPerimeter; + return origin_entity->role() == ExtrusionRole::ExternalPerimeter || origin_entity->role() == ExtrusionRole::OverhangPerimeter; } Vec2f a; @@ -170,16 +170,15 @@ struct SliceConnection float get_flow_width(const LayerRegion *region, ExtrusionRole role) { - switch (role) { - case ExtrusionRole::erBridgeInfill: return region->flow(FlowRole::frExternalPerimeter).width(); - case ExtrusionRole::erExternalPerimeter: return region->flow(FlowRole::frExternalPerimeter).width(); - case ExtrusionRole::erGapFill: return region->flow(FlowRole::frInfill).width(); - case ExtrusionRole::erPerimeter: return region->flow(FlowRole::frPerimeter).width(); - case ExtrusionRole::erSolidInfill: return region->flow(FlowRole::frSolidInfill).width(); - case ExtrusionRole::erInternalInfill: return region->flow(FlowRole::frInfill).width(); - case ExtrusionRole::erTopSolidInfill: return region->flow(FlowRole::frTopSolidInfill).width(); - default: return region->flow(FlowRole::frPerimeter).width(); - } + if (role == ExtrusionRole::BridgeInfill) return region->flow(FlowRole::frExternalPerimeter).width(); + if (role == ExtrusionRole::ExternalPerimeter) return region->flow(FlowRole::frExternalPerimeter).width(); + if (role == ExtrusionRole::GapFill) return region->flow(FlowRole::frInfill).width(); + if (role == ExtrusionRole::Perimeter) return region->flow(FlowRole::frPerimeter).width(); + if (role == ExtrusionRole::SolidInfill) return region->flow(FlowRole::frSolidInfill).width(); + if (role == ExtrusionRole::InternalInfill) return region->flow(FlowRole::frInfill).width(); + if (role == ExtrusionRole::TopSolidInfill) return region->flow(FlowRole::frTopSolidInfill).width(); + // default + return region->flow(FlowRole::frPerimeter).width(); } std::vector to_short_lines(const ExtrusionEntity *e, float length_limit) @@ -800,7 +799,7 @@ SupportPoints check_stability(const PrintObject *po, const PrintTryCancel& cance const LayerRegion *fill_region = layer->get_region(fill_range.region()); for (const auto &fill_idx : fill_range) { const ExtrusionEntity *entity = fill_region->fills().entities[fill_idx]; - if (entity->role() == erBridgeInfill) { + if (entity->role() == ExtrusionRole::BridgeInfill) { for (const ExtrusionLine &bridge : check_extrusion_entity_stability(entity, fill_region, prev_layer_ext_perim_lines,prev_layer_boundary, params)) { if (bridge.support_point_generated) { diff --git a/src/libslic3r/enum_bitmask.hpp b/src/libslic3r/enum_bitmask.hpp index 4c2076313..72172fad9 100644 --- a/src/libslic3r/enum_bitmask.hpp +++ b/src/libslic3r/enum_bitmask.hpp @@ -40,13 +40,18 @@ public: constexpr bool operator&(option_type t) { return m_bits & mask_value(t); } constexpr bool has(option_type t) { return m_bits & mask_value(t); } + constexpr bool operator==(const enum_bitmask r) const { return m_bits == r.m_bits; } + constexpr bool operator!=(const enum_bitmask r) const { return m_bits != r.m_bits; } + // For sorting by the enum values. + constexpr bool lower(const enum_bitmask r) const { return m_bits < r.m_bits; } + private: underlying_type m_bits = 0; }; // For enabling free functions producing enum_bitmask<> type from bit operations on enums. -template struct is_enum_bitmask_type { static const bool enable = false; }; -#define ENABLE_ENUM_BITMASK_OPERATORS(x) template<> struct is_enum_bitmask_type { static const bool enable = true; }; +template struct is_enum_bitmask_type { static constexpr const bool enable = false; }; +#define ENABLE_ENUM_BITMASK_OPERATORS(x) template<> struct is_enum_bitmask_type { static constexpr const bool enable = true; }; template inline constexpr bool is_enum_bitmask_type_v = is_enum_bitmask_type::enable; // Creates an enum_bitmask from two options, convenient for passing of options to a function: diff --git a/src/slic3r/GUI/GCodeViewer.cpp b/src/slic3r/GUI/GCodeViewer.cpp index 097757ff9..451c43ff2 100644 --- a/src/slic3r/GUI/GCodeViewer.cpp +++ b/src/slic3r/GUI/GCodeViewer.cpp @@ -899,7 +899,7 @@ void GCodeViewer::reset() m_shells.volumes.clear(); m_layers.reset(); m_layers_z_range = { 0, 0 }; - m_roles = std::vector(); + m_roles = std::vector(); m_print_statistics.reset(); for (size_t i = 0; i < static_cast(PrintEstimatedStatistics::ETimeMode::Count); ++i) { m_layers_times[i] = std::vector(); @@ -1607,8 +1607,7 @@ void GCodeViewer::load_toolpaths(const GCodeProcessorResult& gcode_result) curr.extrusion_role != erSupportMaterial && curr.extrusion_role != erSupportMaterialInterface && curr.extrusion_role != erWipeTower && - curr.extrusion_role != erCustom && - curr.extrusion_role != erMixed) { + curr.extrusion_role != erCustom) { const Vec3d curr_pos = curr.position.cast(); const Vec3d prev_pos = prev.position.cast(); m_cog.add_segment(curr_pos, prev_pos, curr.mm3_per_mm * (curr_pos - prev_pos).norm()); @@ -3469,12 +3468,12 @@ void GCodeViewer::render_legend(float& legend_height) return _u8L("from") + " " + std::string(buf1) + " " + _u8L("to") + " " + std::string(buf2) + " " + _u8L("mm"); }; - auto role_time_and_percent = [time_mode](ExtrusionRole role) { - auto it = std::find_if(time_mode.roles_times.begin(), time_mode.roles_times.end(), [role](const std::pair& item) { return role == item.first; }); + auto role_time_and_percent = [time_mode](GCodeExtrusionRole role) { + auto it = std::find_if(time_mode.roles_times.begin(), time_mode.roles_times.end(), [role](const std::pair& item) { return role == item.first; }); return (it != time_mode.roles_times.end()) ? std::make_pair(it->second, it->second / time_mode.time) : std::make_pair(0.0f, 0.0f); }; - auto used_filament_per_role = [this, imperial_units](ExtrusionRole role) { + auto used_filament_per_role = [this, imperial_units](GCodeExtrusionRole role) { auto it = m_print_statistics.used_filaments_per_role.find(role); if (it == m_print_statistics.used_filaments_per_role.end()) return std::make_pair(0.0, 0.0); @@ -3494,10 +3493,10 @@ void GCodeViewer::render_legend(float& legend_height) if (m_view_type == EViewType::FeatureType) { // calculate offsets to align time/percentage data - for (size_t i = 0; i < m_roles.size(); ++i) { - ExtrusionRole role = m_roles[i]; + for (GCodeExtrusionRole role : m_roles) { + assert(role < erCount); if (role < erCount) { - labels.push_back(_u8L(ExtrusionEntity::role_to_string(role))); + labels.push_back(_u8L(gcode_extrusion_role_to_string(role))); auto [time, percent] = role_time_and_percent(role); times.push_back((time > 0.0f) ? short_time(get_time_dhms(time)) : ""); percents.push_back(percent); @@ -3610,7 +3609,7 @@ void GCodeViewer::render_legend(float& legend_height) max_time_percent = std::max(max_time_percent, time_mode.travel_time / time_mode.time); for (size_t i = 0; i < m_roles.size(); ++i) { - ExtrusionRole role = m_roles[i]; + GCodeExtrusionRole role = m_roles[i]; if (role >= erCount) continue; const bool visible = is_visible(role); diff --git a/src/slic3r/GUI/GCodeViewer.hpp b/src/slic3r/GUI/GCodeViewer.hpp index b077de98a..11a0d6476 100644 --- a/src/slic3r/GUI/GCodeViewer.hpp +++ b/src/slic3r/GUI/GCodeViewer.hpp @@ -208,7 +208,7 @@ class GCodeViewer }; EMoveType type{ EMoveType::Noop }; - ExtrusionRole role{ erNone }; + GCodeExtrusionRole role{ erNone }; float delta_extruder{ 0.0f }; float height{ 0.0f }; float width{ 0.0f }; @@ -753,7 +753,7 @@ private: std::vector m_tool_colors; Layers m_layers; std::array m_layers_z_range; - std::vector m_roles; + std::vector m_roles; size_t m_extruders_count; std::vector m_extruder_ids; std::vector m_filament_diameters; @@ -849,7 +849,7 @@ private: #if ENABLE_GCODE_VIEWER_STATISTICS void render_statistics(); #endif // ENABLE_GCODE_VIEWER_STATISTICS - bool is_visible(ExtrusionRole role) const { + bool is_visible(GCodeExtrusionRole role) const { return role < erCount && (m_extrusions.role_visibility_flags & (1 << role)) != 0; } bool is_visible(const Path& path) const { return is_visible(path.role); } diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp index 5331094c1..92289b9df 100644 --- a/src/slic3r/GUI/GLCanvas3D.cpp +++ b/src/slic3r/GUI/GLCanvas3D.cpp @@ -6567,7 +6567,7 @@ void GLCanvas3D::_load_print_object_toolpaths(const PrintObject& print_object, c if (support_layer) { for (const ExtrusionEntity *extrusion_entity : support_layer->support_fills.entities) _3DScene::extrusionentity_to_verts(extrusion_entity, float(layer->print_z), copy, - select_geometry(idx_layer, (extrusion_entity->role() == erSupportMaterial) ? + select_geometry(idx_layer, (extrusion_entity->role() == ExtrusionRole::SupportMaterial) ? support_layer->object()->config().support_material_extruder : support_layer->object()->config().support_material_interface_extruder, 2)); } diff --git a/tests/fff_print/test_extrusion_entity.cpp b/tests/fff_print/test_extrusion_entity.cpp index 56588d98a..5f7de1f14 100644 --- a/tests/fff_print/test_extrusion_entity.cpp +++ b/tests/fff_print/test_extrusion_entity.cpp @@ -21,7 +21,7 @@ static inline Slic3r::Point random_point(float LO=-50, float HI=50) // build a sample extrusion entity collection with random start and end points. static Slic3r::ExtrusionPath random_path(size_t length = 20, float LO = -50, float HI = 50) { - ExtrusionPath t {erPerimeter, 1.0, 1.0, 1.0}; + ExtrusionPath t { ExtrusionRole::Perimeter, 1.0, 1.0, 1.0 }; for (size_t j = 0; j < length; ++ j) t.polyline.append(random_point(LO, HI)); return t; @@ -37,7 +37,7 @@ static Slic3r::ExtrusionPaths random_paths(size_t count = 10, size_t length = 20 SCENARIO("ExtrusionPath", "[ExtrusionEntity]") { GIVEN("Simple path") { - Slic3r::ExtrusionPath path{ erExternalPerimeter }; + Slic3r::ExtrusionPath path{ ExtrusionRole::ExternalPerimeter }; path.polyline = { { 100, 100 }, { 200, 100 }, { 200, 200 } }; path.mm3_per_mm = 1.; THEN("first point") { @@ -64,7 +64,7 @@ SCENARIO("ExtrusionLoop", "[ExtrusionEntity]") Polygon square { { 100, 100 }, { 200, 100 }, { 200, 200 }, { 100, 200 } }; ExtrusionLoop loop; - loop.paths.emplace_back(new_extrusion_path(square.split_at_first_point(), erExternalPerimeter, 1.)); + loop.paths.emplace_back(new_extrusion_path(square.split_at_first_point(), ExtrusionRole::ExternalPerimeter, 1.)); THEN("polygon area") { REQUIRE(loop.polygon().area() == Approx(square.area())); } @@ -81,7 +81,7 @@ SCENARIO("ExtrusionLoop", "[ExtrusionEntity]") REQUIRE(loop2->paths.size() == 1); } THEN("cloned role") { - REQUIRE(loop2->paths.front().role() == erExternalPerimeter); + REQUIRE(loop2->paths.front().role() == ExtrusionRole::ExternalPerimeter); } } WHEN("cloned and split") { @@ -107,8 +107,8 @@ SCENARIO("ExtrusionLoop", "[ExtrusionEntity]") Polyline polyline1 { { 100, 100 }, { 200, 100 }, { 200, 200 } }; Polyline polyline2 { { 200, 200 }, { 100, 200 }, { 100, 100 } }; ExtrusionLoop loop; - loop.paths.emplace_back(new_extrusion_path(polyline1, erExternalPerimeter, 1.)); - loop.paths.emplace_back(new_extrusion_path(polyline2, erOverhangPerimeter, 1.)); + loop.paths.emplace_back(new_extrusion_path(polyline1, ExtrusionRole::ExternalPerimeter, 1.)); + loop.paths.emplace_back(new_extrusion_path(polyline2, ExtrusionRole::OverhangPerimeter, 1.)); double tot_len = polyline1.length() + polyline2.length(); THEN("length") { @@ -135,9 +135,9 @@ SCENARIO("ExtrusionLoop", "[ExtrusionEntity]") REQUIRE(loop2->paths[1].polyline.back() == loop2->paths[2].polyline.front()); } THEN("expected order after splitting") { - REQUIRE(loop2->paths.front().role() == erExternalPerimeter); - REQUIRE(loop2->paths[1].role() == erOverhangPerimeter); - REQUIRE(loop2->paths[2].role() == erExternalPerimeter); + REQUIRE(loop2->paths.front().role() == ExtrusionRole::ExternalPerimeter); + REQUIRE(loop2->paths[1].role() == ExtrusionRole::OverhangPerimeter); + REQUIRE(loop2->paths[2].role() == ExtrusionRole::ExternalPerimeter); } THEN("path has correct number of points") { REQUIRE(loop2->paths.front().polyline.size() == 2); @@ -175,8 +175,8 @@ SCENARIO("ExtrusionLoop", "[ExtrusionEntity]") REQUIRE(loop2->paths[1].polyline.back() == loop2->paths.front().polyline.front()); } THEN("expected order after splitting") { - REQUIRE(loop2->paths.front().role() == erOverhangPerimeter); - REQUIRE(loop2->paths[1].role() == erExternalPerimeter); + REQUIRE(loop2->paths.front().role() == ExtrusionRole::OverhangPerimeter); + REQUIRE(loop2->paths[1].role() == ExtrusionRole::ExternalPerimeter); } THEN("path has correct number of points") { REQUIRE(loop2->paths.front().polyline.size() == 3); @@ -207,10 +207,10 @@ SCENARIO("ExtrusionLoop", "[ExtrusionEntity]") Polyline polyline3 { { 9829401, 9321068 }, { 4821067, 9321068 }, { 4821067, 4821067 }, { 9829401, 4821067 } }; Polyline polyline4 { { 9829401, 4821067 }, { 59312736,4821067 } }; ExtrusionLoop loop; - loop.paths.emplace_back(new_extrusion_path(polyline1, erExternalPerimeter, 1.)); - loop.paths.emplace_back(new_extrusion_path(polyline2, erOverhangPerimeter, 1.)); - loop.paths.emplace_back(new_extrusion_path(polyline3, erExternalPerimeter, 1.)); - loop.paths.emplace_back(new_extrusion_path(polyline4, erOverhangPerimeter, 1.)); + loop.paths.emplace_back(new_extrusion_path(polyline1, ExtrusionRole::ExternalPerimeter, 1.)); + loop.paths.emplace_back(new_extrusion_path(polyline2, ExtrusionRole::OverhangPerimeter, 1.)); + loop.paths.emplace_back(new_extrusion_path(polyline3, ExtrusionRole::ExternalPerimeter, 1.)); + loop.paths.emplace_back(new_extrusion_path(polyline4, ExtrusionRole::OverhangPerimeter, 1.)); double len = loop.length(); WHEN("splitting at vertex") { Point point(4821067, 9321068); @@ -220,10 +220,10 @@ SCENARIO("ExtrusionLoop", "[ExtrusionEntity]") REQUIRE(loop.length() == Approx(len)); } THEN("order is correctly preserved after splitting") { - REQUIRE(loop.paths.front().role() == erExternalPerimeter); - REQUIRE(loop.paths[1].role() == erOverhangPerimeter); - REQUIRE(loop.paths[2].role() == erExternalPerimeter); - REQUIRE(loop.paths[3].role() == erOverhangPerimeter); + REQUIRE(loop.paths.front().role() == ExtrusionRole::ExternalPerimeter); + REQUIRE(loop.paths[1].role() == ExtrusionRole::OverhangPerimeter); + REQUIRE(loop.paths[2].role() == ExtrusionRole::ExternalPerimeter); + REQUIRE(loop.paths[3].role() == ExtrusionRole::OverhangPerimeter); } } } @@ -233,7 +233,7 @@ SCENARIO("ExtrusionLoop", "[ExtrusionEntity]") loop.paths.emplace_back(new_extrusion_path( Polyline { { 15896783, 15868739 }, { 24842049, 12117558 }, { 33853238, 15801279 }, { 37591780, 24780128 }, { 37591780, 24844970 }, { 33853231, 33825297 }, { 24842049, 37509013 }, { 15896798, 33757841 }, { 12211841, 24812544 }, { 15896783, 15868739 } }, - erExternalPerimeter, 1.)); + ExtrusionRole::ExternalPerimeter, 1.)); double len = loop.length(); THEN("split_at() preserves total length") { loop.split_at({ 15896783, 15868739 }, false, 0); @@ -245,9 +245,9 @@ SCENARIO("ExtrusionLoop", "[ExtrusionEntity]") SCENARIO("ExtrusionEntityCollection: Basics", "[ExtrusionEntity]") { Polyline polyline { { 100, 100 }, { 200, 100 }, { 200, 200 } }; - ExtrusionPath path = new_extrusion_path(polyline, erExternalPerimeter, 1.); + ExtrusionPath path = new_extrusion_path(polyline, ExtrusionRole::ExternalPerimeter, 1.); ExtrusionLoop loop; - loop.paths.emplace_back(new_extrusion_path(Polygon(polyline.points).split_at_first_point(), erInternalInfill, 1.)); + loop.paths.emplace_back(new_extrusion_path(Polygon(polyline.points).split_at_first_point(), ExtrusionRole::InternalInfill, 1.)); ExtrusionEntityCollection collection; collection.append(path); THEN("no_sort is false by default") { @@ -378,7 +378,7 @@ TEST_CASE("ExtrusionEntityCollection: Chained path", "[ExtrusionEntity]") { REQUIRE(chained == test.chained); ExtrusionEntityCollection unchained_extrusions; extrusion_entities_append_paths(unchained_extrusions.entities, test.unchained, - erInternalInfill, 0., 0.4f, 0.3f); + ExtrusionRole::InternalInfill, 0., 0.4f, 0.3f); THEN("Chaining works") { ExtrusionEntityCollection chained_extrusions = unchained_extrusions.chained_path_from(test.initial_point); REQUIRE(chained_extrusions.entities.size() == test.chained.size()); diff --git a/tests/fff_print/test_perimeters.cpp b/tests/fff_print/test_perimeters.cpp index e613fa23d..4239d39dd 100644 --- a/tests/fff_print/test_perimeters.cpp +++ b/tests/fff_print/test_perimeters.cpp @@ -80,13 +80,13 @@ SCENARIO("Perimeter nesting", "[Perimeters]") } THEN("expected number of external loops") { size_t num_external = std::count_if(loops.entities.begin(), loops.entities.end(), - [](const ExtrusionEntity *ee){ return ee->role() == erExternalPerimeter; }); + [](const ExtrusionEntity *ee){ return ee->role() == ExtrusionRole::ExternalPerimeter; }); REQUIRE(num_external == data.external); } THEN("expected external order") { std::vector ext_order; for (auto *ee : loops.entities) - ext_order.emplace_back(ee->role() == erExternalPerimeter); + ext_order.emplace_back(ee->role() == ExtrusionRole::ExternalPerimeter); REQUIRE(ext_order == data.ext_order); } THEN("expected number of internal contour loops") {