3DPrinting/PrusaSlicer-NonPlainar
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

fix prointConfig for dynamic speeds - for single line options, label must be used (instead of fulllabel)

Browse Source
This commit is contained in:
Pavel Mikus 2023-02-22 15:11:15 +01:00 committed by Pavel Mikuš
parent a496444b7e
commit 59faa86915
1 changed files with 9 additions and 13 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
src/libslic3r/PrintConfig.cpp
View File

@ -535,20 +535,16 @@ void PrintConfigDef::init_fff_params()
def->label = L("Enable dynamic overhang speeds");
def->category = L("Speed");
def->tooltip = L("This setting enables dynamic speed control on overhangs."
"Controls overhang levels, expressed as a percentage of overlap of the extrusion with the previous layer - "
"100% represents full overlap - no overhang is present, while 0% represents full overhang (floating extrusion). "
"Each overhang level then corresponds with the overhang speed below. Speeds for overhang levels in between are "
"calculated via linear interpolation."
"If you set multiple different speeds for the same overhang level, only the largest speed is used. "
"This setting controls the speed on the overhang with the overlap value set above. "
"The speed of the extrusion is calculated as a linear interpolation of the speeds for higher and lower overlap. "
"If set as percentage, the speed is calculated over the external perimeter speed."
"Overhang size is expressed as a percentage of overlap of the extrusion with the previous layer - "
"100% represents full overlap - no overhang is present, while 0% represents full overhang (floating extrusion, bridge). "
"You can set speed for each overhang size listed below. Speeds for overhang levels in between are "
"calculated via linear interpolation. If set as percentage, the speed is calculated over the external perimeter speed."
);
def->mode = comAdvanced;
def->set_default_value(new ConfigOptionBool(false));
def = this->add("overhang_speed_0", coFloatOrPercent);
def->full_label = L("speed for 0\% overlap (bridge)");
def->label = L("speed for 0\% overlap (bridge)");
def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->sidetext = L("mm/s or %");
@ -557,7 +553,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloatOrPercent(15, false));
def = this->add("overhang_speed_1", coFloatOrPercent);
def->full_label = L("speed for 20\% overlap");
def->label = L("speed for 20\% overlap");
def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->sidetext = L("mm/s or %");
@ -566,7 +562,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloatOrPercent(20, false));
def = this->add("overhang_speed_2", coFloatOrPercent);
def->full_label = L("speed for 40\% overlap");
def->label = L("speed for 40\% overlap");
def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->sidetext = L("mm/s or %");
@ -575,7 +571,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloatOrPercent(25, false));
def = this->add("overhang_speed_3", coFloatOrPercent);
def->full_label = L("speed for 60\% overlap");
def->label = L("speed for 60\% overlap");
def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->sidetext = L("mm/s or %");
@ -584,7 +580,7 @@ void PrintConfigDef::init_fff_params()
def->set_default_value(new ConfigOptionFloatOrPercent(25, false));
def = this->add("overhang_speed_4", coFloatOrPercent);
def->full_label = L("speed for 80\% overlap");
def->label = L("speed for 80\% overlap");
def->category = L("Speed");
def->tooltip = L("Controls the speed for the corresponding extrusion overlap value.");
def->sidetext = L("mm/s or %");