Prototype for exporting estimated remaining time into gcode for default and silent mode

lib/Slic3r/GUI/Plater.pm

@@ -472,7 +472,8 @@ sub new {
                 fil_mm3 => L("Used Filament (mm³)"),
                 fil_g   => L("Used Filament (g)"),
                 cost    => L("Cost"),
-                time    => L("Estimated printing time"),
+                default_time => L("Estimated printing time (default mode)"),
+                silent_time  => L("Estimated printing time (silent mode)"),
             );
             while (my $field = shift @info) {
                 my $label = shift @info;
@@ -1542,7 +1543,8 @@ sub on_export_completed {
     $self->{"print_info_cost"}->SetLabel(sprintf("%.2f" , $self->{print}->total_cost));
     $self->{"print_info_fil_g"}->SetLabel(sprintf("%.2f" , $self->{print}->total_weight));
     $self->{"print_info_fil_mm3"}->SetLabel(sprintf("%.2f" , $self->{print}->total_extruded_volume));
-    $self->{"print_info_time"}->SetLabel($self->{print}->estimated_print_time);
+    $self->{"print_info_default_time"}->SetLabel($self->{print}->estimated_default_print_time);
+    $self->{"print_info_silent_time"}->SetLabel($self->{print}->estimated_silent_print_time);
     $self->{"print_info_fil_m"}->SetLabel(sprintf("%.2f" , $self->{print}->total_used_filament / 1000));
     $self->{"print_info_box_show"}->(1);
 

xs/src/libslic3r/GCode.cpp

@@ -374,6 +374,9 @@ void GCode::do_export(Print *print, const char *path, GCodePreviewData *preview_
         throw std::runtime_error(std::string("G-code export to ") + path + " failed\nIs the disk full?\n");
     }
     fclose(file);
+
+    GCodeTimeEstimator::post_process_elapsed_times(path_tmp, m_default_time_estimator.get_time(), m_silent_time_estimator.get_time());
+
     if (! this->m_placeholder_parser_failed_templates.empty()) {
         // G-code export proceeded, but some of the PlaceholderParser substitutions failed.
         std::string msg = std::string("G-code export to ") + path + " failed due to invalid custom G-code sections:\n\n";
@@ -403,9 +406,11 @@ void GCode::_do_export(Print &print, FILE *file, GCodePreviewData *preview_data)
 {
     PROFILE_FUNC();
 
-    // resets time estimator
+    // resets time estimators
-    m_time_estimator.reset();
+    m_default_time_estimator.reset();
-    m_time_estimator.set_dialect(print.config.gcode_flavor);
+    m_default_time_estimator.set_dialect(print.config.gcode_flavor);
+    m_silent_time_estimator.reset();
+    m_silent_time_estimator.set_dialect(print.config.gcode_flavor);
 
     // resets analyzer
     m_analyzer.reset();
@@ -596,6 +601,10 @@ void GCode::_do_export(Print &print, FILE *file, GCodePreviewData *preview_data)
         _writeln(file, buf);
     }
 
+    // before start gcode time estimation
+    _write(file, m_default_time_estimator.get_elapsed_time_string().c_str());
+    _write(file, m_silent_time_estimator.get_elapsed_time_string().c_str());
+
     // Write the custom start G-code
     _writeln(file, start_gcode);
     // Process filament-specific gcode in extruder order.
@@ -800,13 +809,17 @@ void GCode::_do_export(Print &print, FILE *file, GCodePreviewData *preview_data)
             for (const std::string &end_gcode : print.config.end_filament_gcode.values)
                 _writeln(file, this->placeholder_parser_process("end_filament_gcode", end_gcode, (unsigned int)(&end_gcode - &print.config.end_filament_gcode.values.front()), &config));
         }
+        // before end gcode time estimation
+        _write(file, m_default_time_estimator.get_elapsed_time_string().c_str());
+        _write(file, m_silent_time_estimator.get_elapsed_time_string().c_str());
         _writeln(file, this->placeholder_parser_process("end_gcode", print.config.end_gcode, m_writer.extruder()->id(), &config));
     }
     _write(file, m_writer.update_progress(m_layer_count, m_layer_count, true)); // 100%
     _write(file, m_writer.postamble());
 
     // calculates estimated printing time
-    m_time_estimator.calculate_time();
+    m_default_time_estimator.calculate_time();
+    m_silent_time_estimator.calculate_time();
 
     // Get filament stats.
     print.filament_stats.clear();
@@ -814,7 +827,8 @@ void GCode::_do_export(Print &print, FILE *file, GCodePreviewData *preview_data)
     print.total_extruded_volume  = 0.;
     print.total_weight           = 0.;
     print.total_cost             = 0.;
-    print.estimated_print_time   = m_time_estimator.get_time_hms();
+    print.estimated_default_print_time = m_default_time_estimator.get_time_dhms();
+    print.estimated_silent_print_time = m_silent_time_estimator.get_time_dhms();
     for (const Extruder &extruder : m_writer.extruders()) {
         double used_filament   = extruder.used_filament();
         double extruded_volume = extruder.extruded_volume();
@@ -834,7 +848,8 @@ void GCode::_do_export(Print &print, FILE *file, GCodePreviewData *preview_data)
         print.total_extruded_volume = print.total_extruded_volume + extruded_volume;
     }
     _write_format(file, "; total filament cost = %.1lf\n", print.total_cost);
-    _write_format(file, "; estimated printing time = %s\n", m_time_estimator.get_time_hms().c_str());
+    _write_format(file, "; estimated printing time (default mode) = %s\n", m_default_time_estimator.get_time_dhms().c_str());
+    _write_format(file, "; estimated printing time (silent mode) = %s\n", m_silent_time_estimator.get_time_dhms().c_str());
 
     // Append full config.
     _write(file, "\n");
@@ -1399,8 +1414,12 @@ void GCode::process_layer(
     if (m_pressure_equalizer)
         gcode = m_pressure_equalizer->process(gcode.c_str(), false);
     // printf("G-code after filter:\n%s\n", out.c_str());
-
+    
     _write(file, gcode);
+
+    // after layer time estimation
+    _write(file, m_default_time_estimator.get_elapsed_time_string().c_str());
+    _write(file, m_silent_time_estimator.get_elapsed_time_string().c_str());
 }
 
 void GCode::apply_print_config(const PrintConfig &print_config)
@@ -2059,7 +2078,8 @@ void GCode::_write(FILE* file, const char *what)
         // writes string to file
         fwrite(gcode, 1, ::strlen(gcode), file);
         // updates time estimator and gcode lines vector
-        m_time_estimator.add_gcode_block(gcode);
+        m_default_time_estimator.add_gcode_block(gcode);
+        m_silent_time_estimator.add_gcode_block(gcode);
     }
 }
 

xs/src/libslic3r/GCode.hpp

@@ -133,6 +133,8 @@ public:
         m_last_height(GCodeAnalyzer::Default_Height),
         m_brim_done(false),
         m_second_layer_things_done(false),
+        m_default_time_estimator(GCodeTimeEstimator::Default),
+        m_silent_time_estimator(GCodeTimeEstimator::Silent),
         m_last_obj_copy(nullptr, Point(std::numeric_limits<coord_t>::max(), std::numeric_limits<coord_t>::max()))
         {}
     ~GCode() {}
@@ -289,8 +291,9 @@ protected:
     // Index of a last object copy extruded.
     std::pair<const PrintObject*, Point> m_last_obj_copy;
 
-    // Time estimator
+    // Time estimators
-    GCodeTimeEstimator m_time_estimator;
+    GCodeTimeEstimator m_default_time_estimator;
+    GCodeTimeEstimator m_silent_time_estimator;
 
     // Analyzer
     GCodeAnalyzer m_analyzer;

xs/src/libslic3r/GCodeTimeEstimator.cpp

@@ -4,9 +4,14 @@
 
 #include <Shiny/Shiny.h>
 
+#include <boost/nowide/fstream.hpp>
+#include <boost/nowide/cstdio.hpp>
+#include <boost/algorithm/string/predicate.hpp>
+
 static const float MMMIN_TO_MMSEC = 1.0f / 60.0f;
 static const float MILLISEC_TO_SEC = 0.001f;
 static const float INCHES_TO_MM = 25.4f;
+
 static const float DEFAULT_FEEDRATE = 1500.0f; // from Prusa Firmware (Marlin_main.cpp)
 static const float DEFAULT_ACCELERATION = 1500.0f; // Prusa Firmware 1_75mm_MK2
 static const float DEFAULT_RETRACT_ACCELERATION = 1500.0f; // Prusa Firmware 1_75mm_MK2
@@ -17,8 +22,31 @@ static const float DEFAULT_MINIMUM_FEEDRATE = 0.0f; // from Prusa Firmware (Conf
 static const float DEFAULT_MINIMUM_TRAVEL_FEEDRATE = 0.0f; // from Prusa Firmware (Configuration_adv.h)
 static const float DEFAULT_EXTRUDE_FACTOR_OVERRIDE_PERCENTAGE = 1.0f; // 100 percent
 
+static const float SILENT_FEEDRATE = 1500.0f; // from Prusa Firmware (Marlin_main.cpp)
+static const float SILENT_ACCELERATION = 1250.0f; // Prusa Firmware 1_75mm_MK25-RAMBo13a-E3Dv6full
+static const float SILENT_RETRACT_ACCELERATION = 1250.0f; // Prusa Firmware 1_75mm_MK25-RAMBo13a-E3Dv6full
+static const float SILENT_AXIS_MAX_FEEDRATE[] = { 200.0f, 200.0f, 12.0f, 120.0f }; // Prusa Firmware 1_75mm_MK25-RAMBo13a-E3Dv6full
+static const float SILENT_AXIS_MAX_ACCELERATION[] = { 1000.0f, 1000.0f, 200.0f, 5000.0f }; // Prusa Firmware 1_75mm_MK25-RAMBo13a-E3Dv6full
+static const float SILENT_AXIS_MAX_JERK[] = { 10.0f, 10.0f, 0.4f, 2.5f }; // from Prusa Firmware (Configuration.h)
+static const float SILENT_MINIMUM_FEEDRATE = 0.0f; // from Prusa Firmware (Configuration_adv.h)
+static const float SILENT_MINIMUM_TRAVEL_FEEDRATE = 0.0f; // from Prusa Firmware (Configuration_adv.h)
+static const float SILENT_EXTRUDE_FACTOR_OVERRIDE_PERCENTAGE = 1.0f; // 100 percent
+
 static const float PREVIOUS_FEEDRATE_THRESHOLD = 0.0001f;
 
+static const std::string ELAPSED_TIME_TAG_DEFAULT = ";_ELAPSED_TIME_DEFAULT: ";
+static const std::string ELAPSED_TIME_TAG_SILENT = ";_ELAPSED_TIME_SILENT: ";
+
+#define REMAINING_TIME_USE_SINGLE_GCODE_COMMAND 1
+#if REMAINING_TIME_USE_SINGLE_GCODE_COMMAND
+static const std::string REMAINING_TIME_CMD = "M998";
+#else
+static const std::string REMAINING_TIME_CMD_DEFAULT = "M998";
+static const std::string REMAINING_TIME_CMD_SILENT = "M999";
+#endif // REMAINING_TIME_USE_SINGLE_GCODE_COMMAND
+
+static const std::string REMAINING_TIME_COMMENT = " ; estimated remaining time";
+
 #if ENABLE_MOVE_STATS
 static const std::string MOVE_TYPE_STR[Slic3r::GCodeTimeEstimator::Block::Num_Types] =
 {
@@ -73,6 +101,11 @@ namespace Slic3r {
         return ::sqrt(value);
     }
 
+    GCodeTimeEstimator::Block::Block()
+        : st_synchronized(false)
+    {
+    }
+
     float GCodeTimeEstimator::Block::move_length() const
     {
         float length = ::sqrt(sqr(delta_pos[X]) + sqr(delta_pos[Y]) + sqr(delta_pos[Z]));
@@ -159,63 +192,13 @@ namespace Slic3r {
     }
 #endif // ENABLE_MOVE_STATS
 
-    GCodeTimeEstimator::GCodeTimeEstimator()
+    GCodeTimeEstimator::GCodeTimeEstimator(EMode mode)
+        : _mode(mode)
     {
         reset();
         set_default();
     }
 
-    void GCodeTimeEstimator::calculate_time_from_text(const std::string& gcode)
-    {
-        reset();
-
-        _parser.parse_buffer(gcode,
-            [this](GCodeReader &reader, const GCodeReader::GCodeLine &line)
-        { this->_process_gcode_line(reader, line); });
-
-        _calculate_time();
-
-#if ENABLE_MOVE_STATS
-        _log_moves_stats();
-#endif // ENABLE_MOVE_STATS
-
-        _reset_blocks();
-        _reset();
-    }
-
-    void GCodeTimeEstimator::calculate_time_from_file(const std::string& file)
-    {
-        reset();
-
-        _parser.parse_file(file, boost::bind(&GCodeTimeEstimator::_process_gcode_line, this, _1, _2));
-        _calculate_time();
-
-#if ENABLE_MOVE_STATS
-        _log_moves_stats();
-#endif // ENABLE_MOVE_STATS
-
-        _reset_blocks();
-        _reset();
-    }
-
-    void GCodeTimeEstimator::calculate_time_from_lines(const std::vector<std::string>& gcode_lines)
-    {
-        reset();
-
-        auto action = [this](GCodeReader &reader, const GCodeReader::GCodeLine &line)
-        { this->_process_gcode_line(reader, line); };
-        for (const std::string& line : gcode_lines)
-            _parser.parse_line(line, action);
-        _calculate_time();
-
-#if ENABLE_MOVE_STATS
-        _log_moves_stats();
-#endif // ENABLE_MOVE_STATS
-
-        _reset_blocks();
-        _reset();
-    }
-
     void GCodeTimeEstimator::add_gcode_line(const std::string& gcode_line)
     {
         PROFILE_FUNC();
@@ -239,14 +222,157 @@ namespace Slic3r {
     void GCodeTimeEstimator::calculate_time()
     {
         PROFILE_FUNC();
+        _reset_time();
+        _set_blocks_st_synchronize(false);
         _calculate_time();
 
 #if ENABLE_MOVE_STATS
         _log_moves_stats();
 #endif // ENABLE_MOVE_STATS
+    }
 
-        _reset_blocks();
+    void GCodeTimeEstimator::calculate_time_from_text(const std::string& gcode)
-        _reset();
+    {
+        reset();
+
+        _parser.parse_buffer(gcode,
+            [this](GCodeReader &reader, const GCodeReader::GCodeLine &line)
+        { this->_process_gcode_line(reader, line); });
+
+        _calculate_time();
+
+#if ENABLE_MOVE_STATS
+        _log_moves_stats();
+#endif // ENABLE_MOVE_STATS
+    }
+
+    void GCodeTimeEstimator::calculate_time_from_file(const std::string& file)
+    {
+        reset();
+
+        _parser.parse_file(file, boost::bind(&GCodeTimeEstimator::_process_gcode_line, this, _1, _2));
+        _calculate_time();
+
+#if ENABLE_MOVE_STATS
+        _log_moves_stats();
+#endif // ENABLE_MOVE_STATS
+    }
+
+    void GCodeTimeEstimator::calculate_time_from_lines(const std::vector<std::string>& gcode_lines)
+    {
+        reset();
+
+        auto action = [this](GCodeReader &reader, const GCodeReader::GCodeLine &line)
+        { this->_process_gcode_line(reader, line); };
+        for (const std::string& line : gcode_lines)
+            _parser.parse_line(line, action);
+        _calculate_time();
+
+#if ENABLE_MOVE_STATS
+        _log_moves_stats();
+#endif // ENABLE_MOVE_STATS
+    }
+
+    std::string GCodeTimeEstimator::get_elapsed_time_string()
+    {
+        calculate_time();
+        switch (_mode)
+        {
+        default:
+        case Default:
+            return ELAPSED_TIME_TAG_DEFAULT + std::to_string(get_time()) + "\n";
+        case Silent:
+            return ELAPSED_TIME_TAG_SILENT + std::to_string(get_time()) + "\n";
+        }
+    }
+
+    bool GCodeTimeEstimator::post_process_elapsed_times(const std::string& filename, float default_time, float silent_time)
+    {
+        boost::nowide::ifstream in(filename);
+        if (!in.good())
+            throw std::runtime_error(std::string("Remaining times estimation failed.\nCannot open file for reading.\n"));
+
+        std::string path_tmp = filename + ".times";
+
+        FILE* out = boost::nowide::fopen(path_tmp.c_str(), "wb");
+        if (out == nullptr)
+            throw std::runtime_error(std::string("Remaining times estimation failed.\nCannot open file for writing.\n"));
+
+        std::string line;
+        while (std::getline(in, line))
+        {
+            if (!in.good())
+            {
+                fclose(out);
+                throw std::runtime_error(std::string("Remaining times estimation failed.\nError while reading from file.\n"));
+            }
+
+#if REMAINING_TIME_USE_SINGLE_GCODE_COMMAND
+            // this function expects elapsed time for default and silent mode to be into two consecutive lines inside the gcode
+            if (boost::contains(line, ELAPSED_TIME_TAG_DEFAULT))
+            {
+                std::string default_elapsed_time_str = line.substr(ELAPSED_TIME_TAG_DEFAULT.length());
+                line = REMAINING_TIME_CMD + " D:" + _get_time_dhms(default_time - (float)atof(default_elapsed_time_str.c_str()));
+
+                std::string next_line;
+                std::getline(in, next_line);
+                if (!in.good())
+                {
+                    fclose(out);
+                    throw std::runtime_error(std::string("Remaining times estimation failed.\nError while reading from file.\n"));
+                }
+
+                if (boost::contains(next_line, ELAPSED_TIME_TAG_SILENT))
+                {
+                    std::string silent_elapsed_time_str = next_line.substr(ELAPSED_TIME_TAG_SILENT.length());
+                    line += " S:" + _get_time_dhms(silent_time - (float)atof(silent_elapsed_time_str.c_str())) + REMAINING_TIME_COMMENT;
+                }
+                else
+                    // found horphaned default elapsed time, skip the remaining time line output
+                    line = next_line;
+            }
+            else if (boost::contains(line, ELAPSED_TIME_TAG_SILENT))
+                // found horphaned silent elapsed time, skip the remaining time line output
+                continue;
+#else
+            bool processed = false;
+            if (boost::contains(line, ELAPSED_TIME_TAG_DEFAULT))
+            {
+                std::string elapsed_time_str = line.substr(ELAPSED_TIME_TAG_DEFAULT.length());
+                line = REMAINING_TIME_CMD_DEFAULT + " " + _get_time_dhms(default_time - (float)atof(elapsed_time_str.c_str()));
+                processed = true;
+            }
+            else if (boost::contains(line, ELAPSED_TIME_TAG_SILENT))
+            {
+                std::string elapsed_time_str = line.substr(ELAPSED_TIME_TAG_SILENT.length());
+                line = REMAINING_TIME_CMD_SILENT + " " + _get_time_dhms(silent_time - (float)atof(elapsed_time_str.c_str()));
+                processed = true;
+            }
+
+            if (processed)
+                line += REMAINING_TIME_COMMENT;
+#endif // REMAINING_TIME_USE_SINGLE_GCODE_COMMAND
+
+            line += "\n";
+            fwrite((const void*)line.c_str(), 1, line.length(), out);
+            if (ferror(out))
+            {
+                in.close();
+                fclose(out);
+                boost::nowide::remove(path_tmp.c_str());
+                throw std::runtime_error(std::string("Remaining times estimation failed.\nIs the disk full?\n"));
+            }
+        }
+
+        fclose(out);
+        in.close();
+
+        boost::nowide::remove(filename.c_str());
+        if (boost::nowide::rename(path_tmp.c_str(), filename.c_str()) != 0)
+            throw std::runtime_error(std::string("Failed to rename the output G-code file from ") + path_tmp + " to " + filename + '\n' +
+            "Is " + path_tmp + " locked?" + '\n');
+
+        return true;
     }
 
     void GCodeTimeEstimator::set_axis_position(EAxis axis, float position)
@@ -411,6 +537,66 @@ namespace Slic3r {
         set_global_positioning_type(Absolute);
         set_e_local_positioning_type(Absolute);
 
+        switch (_mode)
+        {
+        default:
+        case Default:
+            {
+                _set_default_as_default();
+                break;
+            }
+        case Silent:
+            {
+                _set_default_as_silent();
+                break;
+            }
+        }
+    }
+
+    void GCodeTimeEstimator::reset()
+    {
+        _reset_time();
+#if ENABLE_MOVE_STATS
+        _moves_stats.clear();
+#endif // ENABLE_MOVE_STATS
+        _reset_blocks();
+        _reset();
+    }
+
+    float GCodeTimeEstimator::get_time() const
+    {
+        return _time;
+    }
+
+    std::string GCodeTimeEstimator::get_time_dhms() const
+    {
+        return _get_time_dhms(get_time());
+    }
+
+    void GCodeTimeEstimator::_reset()
+    {
+        _curr.reset();
+        _prev.reset();
+
+        set_axis_position(X, 0.0f);
+        set_axis_position(Y, 0.0f);
+        set_axis_position(Z, 0.0f);
+
+        set_additional_time(0.0f);
+    }
+
+    void GCodeTimeEstimator::_reset_time()
+    {
+        _time = 0.0f;
+    }
+
+    void GCodeTimeEstimator::_reset_blocks()
+    {
+        _blocks.clear();
+    }
+
+    void GCodeTimeEstimator::_set_default_as_default()
+    {
         set_feedrate(DEFAULT_FEEDRATE);
         set_acceleration(DEFAULT_ACCELERATION);
         set_retract_acceleration(DEFAULT_RETRACT_ACCELERATION);
@@ -427,55 +613,30 @@ namespace Slic3r {
         }
     }
 
-    void GCodeTimeEstimator::reset()
+    void GCodeTimeEstimator::_set_default_as_silent()
     {
-        _time = 0.0f;
+        set_feedrate(SILENT_FEEDRATE);
-#if ENABLE_MOVE_STATS
+        set_acceleration(SILENT_ACCELERATION);
-        _moves_stats.clear();
+        set_retract_acceleration(SILENT_RETRACT_ACCELERATION);
-#endif // ENABLE_MOVE_STATS
+        set_minimum_feedrate(SILENT_MINIMUM_FEEDRATE);
-        _reset_blocks();
+        set_minimum_travel_feedrate(SILENT_MINIMUM_TRAVEL_FEEDRATE);
-        _reset();
+        set_extrude_factor_override_percentage(SILENT_EXTRUDE_FACTOR_OVERRIDE_PERCENTAGE);
+
+        for (unsigned char a = X; a < Num_Axis; ++a)
+        {
+            EAxis axis = (EAxis)a;
+            set_axis_max_feedrate(axis, SILENT_AXIS_MAX_FEEDRATE[a]);
+            set_axis_max_acceleration(axis, SILENT_AXIS_MAX_ACCELERATION[a]);
+            set_axis_max_jerk(axis, SILENT_AXIS_MAX_JERK[a]);
+        }
     }
 
-    float GCodeTimeEstimator::get_time() const
+    void GCodeTimeEstimator::_set_blocks_st_synchronize(bool state)
     {
-        return _time;
+        for (Block& block : _blocks)
-    }
+        {
-
+            block.st_synchronized = state;
-    std::string GCodeTimeEstimator::get_time_hms() const
+        }
-    {
-        float timeinsecs = get_time();
-        int hours = (int)(timeinsecs / 3600.0f);
-        timeinsecs -= (float)hours * 3600.0f;
-        int minutes = (int)(timeinsecs / 60.0f);
-        timeinsecs -= (float)minutes * 60.0f;
-
-        char buffer[64];
-        if (hours > 0)
-            ::sprintf(buffer, "%dh %dm %ds", hours, minutes, (int)timeinsecs);
-        else if (minutes > 0)
-            ::sprintf(buffer, "%dm %ds", minutes, (int)timeinsecs);
-        else
-            ::sprintf(buffer, "%ds", (int)timeinsecs);
-
-        return buffer;
-    }
-
-    void GCodeTimeEstimator::_reset()
-    {
-        _curr.reset();
-        _prev.reset();
-
-        set_axis_position(X, 0.0f);
-        set_axis_position(Y, 0.0f);
-        set_axis_position(Z, 0.0f);
-
-        set_additional_time(0.0f);
-    }
-
-    void GCodeTimeEstimator::_reset_blocks()
-    {
-        _blocks.clear();
     }
 
     void GCodeTimeEstimator::_calculate_time()
@@ -488,6 +649,9 @@ namespace Slic3r {
 
         for (const Block& block : _blocks)
         {
+            if (block.st_synchronized)
+                continue;
+
 #if ENABLE_MOVE_STATS
             float block_time = 0.0f;
             block_time += block.acceleration_time();
@@ -1043,7 +1207,7 @@ namespace Slic3r {
     void GCodeTimeEstimator::_simulate_st_synchronize()
     {
         _calculate_time();
-        _reset_blocks();
+        _set_blocks_st_synchronize(true);
     }
 
     void GCodeTimeEstimator::_forward_pass()
@@ -1051,7 +1215,10 @@ namespace Slic3r {
         if (_blocks.size() > 1)
         {
             for (unsigned int i = 0; i < (unsigned int)_blocks.size() - 1; ++i)
-            {
+            { 
+                if (_blocks[i].st_synchronized || _blocks[i + 1].st_synchronized)
+                    continue;
+
                 _planner_forward_pass_kernel(_blocks[i], _blocks[i + 1]);
             }
         }
@@ -1063,6 +1230,9 @@ namespace Slic3r {
         {
             for (int i = (int)_blocks.size() - 1; i >= 1;  --i)
             {
+                if (_blocks[i - 1].st_synchronized || _blocks[i].st_synchronized)
+                    continue;
+
                 _planner_reverse_pass_kernel(_blocks[i - 1], _blocks[i]);
             }
         }
@@ -1115,6 +1285,9 @@ namespace Slic3r {
 
         for (Block& b : _blocks)
         {
+            if (b.st_synchronized)
+                continue;
+
             curr = next;
             next = &b;
 
@@ -1144,6 +1317,28 @@ namespace Slic3r {
         }
     }
 
+    std::string GCodeTimeEstimator::_get_time_dhms(float time_in_secs)
+    {
+        int days = (int)(time_in_secs / 86400.0f);
+        time_in_secs -= (float)days * 86400.0f;
+        int hours = (int)(time_in_secs / 3600.0f);
+        time_in_secs -= (float)hours * 3600.0f;
+        int minutes = (int)(time_in_secs / 60.0f);
+        time_in_secs -= (float)minutes * 60.0f;
+
+        char buffer[64];
+        if (days > 0)
+            ::sprintf(buffer, "%dd %dh %dm %ds", days, hours, minutes, (int)time_in_secs);
+        else if (hours > 0)
+            ::sprintf(buffer, "%dh %dm %ds", hours, minutes, (int)time_in_secs);
+        else if (minutes > 0)
+            ::sprintf(buffer, "%dm %ds", minutes, (int)time_in_secs);
+        else
+            ::sprintf(buffer, "%ds", (int)time_in_secs);
+
+        return buffer;
+    }
+
 #if ENABLE_MOVE_STATS
     void GCodeTimeEstimator::_log_moves_stats() const
     {

xs/src/libslic3r/GCodeTimeEstimator.hpp

@@ -17,6 +17,12 @@ namespace Slic3r {
     class GCodeTimeEstimator
     {
     public:
+        enum EMode : unsigned char
+        {
+            Default,
+            Silent
+        };
+
         enum EUnits : unsigned char
         {
             Millimeters,
@@ -135,6 +141,10 @@ namespace Slic3r {
             FeedrateProfile feedrate;
             Trapezoid trapezoid;
 
+            bool st_synchronized;
+
+            Block();
+
             // Returns the length of the move covered by this block, in mm
             float move_length() const;
 
@@ -188,18 +198,29 @@ namespace Slic3r {
 #endif // ENABLE_MOVE_STATS
 
     private:
+        EMode _mode;
         GCodeReader _parser;
         State _state;
         Feedrates _curr;
         Feedrates _prev;
         BlocksList _blocks;
         float _time; // s
+
 #if ENABLE_MOVE_STATS
         MovesStatsMap _moves_stats;
 #endif // ENABLE_MOVE_STATS
 
     public:
-        GCodeTimeEstimator();
+        explicit GCodeTimeEstimator(EMode mode);
+
+        // Adds the given gcode line
+        void add_gcode_line(const std::string& gcode_line);
+
+        void add_gcode_block(const char *ptr);
+        void add_gcode_block(const std::string &str) { this->add_gcode_block(str.c_str()); }
+
+        // Calculates the time estimate from the gcode lines added using add_gcode_line() or add_gcode_block()
+        void calculate_time();
 
         // Calculates the time estimate from the given gcode in string format
         void calculate_time_from_text(const std::string& gcode);
@@ -210,14 +231,12 @@ namespace Slic3r {
         // Calculates the time estimate from the gcode contained in given list of gcode lines
         void calculate_time_from_lines(const std::vector<std::string>& gcode_lines);
 
-        // Adds the given gcode line
+        // Calculates the time estimate from the gcode lines added using add_gcode_line() or add_gcode_block()
-        void add_gcode_line(const std::string& gcode_line);
+        // and returns it in a formatted string
+        std::string get_elapsed_time_string();
 
-        void add_gcode_block(const char *ptr);
+        // Converts elapsed time lines, contained in the gcode saved with the given filename, into remaining time commands
-        void add_gcode_block(const std::string &str) { this->add_gcode_block(str.c_str()); }
+        static bool post_process_elapsed_times(const std::string& filename, float default_time, float silent_time);
-
-        // Calculates the time estimate from the gcode lines added using add_gcode_line()
-        void calculate_time();
 
         // Set current position on the given axis with the given value
         void set_axis_position(EAxis axis, float position);
@@ -275,13 +294,19 @@ namespace Slic3r {
         // Returns the estimated time, in seconds
         float get_time() const;
 
-        // Returns the estimated time, in format HHh MMm SSs
+        // Returns the estimated time, in format DDd HHh MMm SSs
-        std::string get_time_hms() const;
+        std::string get_time_dhms() const;
 
     private:
         void _reset();
+        void _reset_time();
         void _reset_blocks();
 
+        void _set_default_as_default();
+        void _set_default_as_silent();
+
+        void _set_blocks_st_synchronize(bool state);
+
         // Calculates the time estimate
         void _calculate_time();
 
@@ -353,6 +378,9 @@ namespace Slic3r {
 
         void _recalculate_trapezoids();
 
+        // Returns the given time is seconds in format DDd HHh MMm SSs
+        static std::string _get_time_dhms(float time_in_secs);
+
 #if ENABLE_MOVE_STATS
         void _log_moves_stats() const;
 #endif // ENABLE_MOVE_STATS

xs/src/libslic3r/Print.hpp

@@ -233,7 +233,8 @@ public:
     PrintRegionPtrs regions;
     PlaceholderParser placeholder_parser;
     // TODO: status_cb
-    std::string                     estimated_print_time;
+    std::string                     estimated_default_print_time;
+    std::string                     estimated_silent_print_time;
     double                          total_used_filament, total_extruded_volume, total_cost, total_weight;
     std::map<size_t, float>         filament_stats;
     PrintState<PrintStep, psCount>  state;

xs/xsp/Print.xsp

@@ -152,8 +152,10 @@ _constant()
         %code%{ RETVAL = &THIS->skirt; %};
     Ref<ExtrusionEntityCollection> brim()
         %code%{ RETVAL = &THIS->brim; %};
-    std::string estimated_print_time()
+    std::string estimated_default_print_time()
-        %code%{ RETVAL = THIS->estimated_print_time; %};
+        %code%{ RETVAL = THIS->estimated_default_print_time; %};
+    std::string estimated_silent_print_time()
+        %code%{ RETVAL = THIS->estimated_silent_print_time; %};
 
     PrintObjectPtrs* objects()
         %code%{ RETVAL = &THIS->objects; %};